suspect-devices/circuitpython/atmel-samd/boards/arduino_zero/init.c, branch main CircuitPython - a Python implementation for teaching coding with microcontrollers https://git.suspectdevices.com/suspect-devices/circuitpython/atom?h=main 2017-06-16T21:55:53+00:00 atmel-samd: Add user initiated safe mode and rework board.c for 2017-06-16T21:55:53+00:00 Scott Shawcroft scott.shawcroft@gmail.com 2017-06-16T21:55:53+00:00 urn:sha1:3e23464b1ed11710714a4d6eaa98c2c84ec6f4dd board specific functionality. Fixes #155 atmel-samd: Remove support for UART REPL from Arduino Zero. 2017-02-19T16:23:31+00:00 Scott Shawcroft scott.shawcroft@gmail.com 2017-02-19T16:23:31+00:00 urn:sha1:8584f5fece5f80f673e7712d78520d0d8a65b55e Slim down Arduino Zero build by turning off mass storage LEDs. 2016-11-29T22:32:04+00:00 Scott Shawcroft scott.shawcroft@gmail.com 2016-11-29T22:07:08+00:00 urn:sha1:ddfa7595b0c5d856f3489ec5f6dd54c920c8cf07 atmel-samd: Make UART REPL Arduino Zero specific. Most will use USB REPL. 2016-10-07T22:06:07+00:00 Scott Shawcroft scott@chickadee.tech 2016-10-07T22:06:07+00:00 urn:sha1:284d3414e155206dd5c9b2af79c6c0abbfb2a2e6 atmel-samd: Support raw repl and soft reset to support ampy. 2016-09-16T00:01:19+00:00 Scott Shawcroft scott@chickadee.tech 2016-09-16T00:01:19+00:00 urn:sha1:7fd84e93f48438ddcff22941286e43df50cd15f0 Closes #1. Also adds TX and RX led support on the Arduino Zero. Blinking the LED works. Clocks should be set up correctly. 2016-08-23T06:53:11+00:00 Scott Shawcroft scott@chickadee.tech 2016-08-23T06:48:09+00:00 urn:sha1:8f26d181c30f8d371a900355a6f9edfab29c8fbe Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.