suspect-devices/circuitpython/atmel-samd/common-hal/microcontroller, branch 2.xCircuitPython - a Python implementation for teaching coding with microcontrollershttps://git.suspectdevices.com/suspect-devices/circuitpython/atom?h=2.x2017-12-20T23:17:06+00:00Fix 1200 baud reset.2017-12-20T23:17:06+00:00Scott Shawcroftscott.shawcroft@gmail.com2017-12-20T23:17:06+00:00urn:sha1:39f30aeec699944da096107cc930c783f61f7712
Fixes #494
Speed up AnalogIn.value.2017-12-15T17:56:39+00:00Dan Halberthalbert@halwitz.org2017-12-15T16:40:35+00:00urn:sha1:0c0a09aeb6ec0357acbe64b034c162c805e07c9eIntroduce reset mechanics to microcontroller.2017-12-05T22:50:58+00:00Scott Shawcroftscott.shawcroft@gmail.com2017-12-05T22:50:58+00:00urn:sha1:b4d36990479888a0be503383367fbd1bd9b6976b
This allows one to configure how a subsequent reset will behave and
also trigger a reset.
Fixes #350 and fixes #173
Re-initialize ADC before every AnalogIn read. (#255)2017-09-16T17:06:23+00:00Dan Halberthalbert@halwitz.org2017-09-16T17:06:23+00:00urn:sha1:75c3be37ac14fc2b188bd932348e45546a806f1a
`microcontroller.cpu.temperature` uses different ADC settings, and caused
AnalogIn to give wrong answers. AnalogIn can no longer assume it's the
only user of the ADC.Add microcontroller.cpu.temperature, for use as a simple sensor on minimal boards. (#211)2017-08-31T17:48:30+00:00Dan Halberthalbert@halwitz.org2017-08-31T17:48:30+00:00urn:sha1:fdb97eda09ca1968df8a919d15ebd1fe191fb57e
* Add microcontroller.cpu, the sole instance of microcontroller.Processor.
microcontroller.cpu.frequency is the clock frequency, in Hz.
microcontroller.cpu.temperature is the reading from the internal temperature sensor, in Celsius. None if not available.
* Squeeze firmware size by using -finline-limit. Otherwise non-Express builds were slightly too big.
* Update submodules.
* Fix documentation glitches
Modernize module and class static dicts; update freetouch2017-08-27T19:02:50+00:00Dan Halberthalbert@halwitz.org2017-08-27T19:02:50+00:00urn:sha1:c679c80c710fd4a0e37ad87200d8a721e19727aaInitial merge of micropython v1.9.2 into circuitpython 2.0.0 (in development) master.2017-08-26T02:17:07+00:00Dan Halberthalbert@halwitz.org2017-08-26T02:17:07+00:00urn:sha1:ef61b5ecb59e9b4e37e3e3c023c62d583c23eb16
cpx build compiles and loads and works in repl; test suite not run yet
esp8266 not tested yet
atmel-samd: Introduce a nvm module for non-volatile byte-level memory access. (#203)2017-08-25T20:00:27+00:00Scott Shawcroftscott@tannewt.org2017-08-25T20:00:27+00:00urn:sha1:266be307770abe11c220eb493388807920914b7a
* atmel-samd: Introduce a nvm module for non-volatile byte-level memory access.
This allows for persisting small configuration values even when the file system
is read-only from CircuitPython.
Fixes #160
* Review feedback:
* Add tests.
* Fix non-zero index.
* Fix len()
atmel-samd: Support wav file playback. Tested up to 16bit 22.1khz. Must be mono file!2017-05-16T02:52:38+00:00Scott Shawcroftscott.shawcroft@gmail.com2017-05-11T01:21:02+00:00urn:sha1:3f5028c666008f58785e86dd477065e3ca99d99f
SD card support may work but likely needs buffer tuning. Its untested.
Fixes #105
atmel-samd: Fix pin reset to ensure USB and SWD are not reset.2017-05-12T23:09:13+00:00Scott Shawcroftscott.shawcroft@gmail.com2017-05-12T23:09:13+00:00urn:sha1:e0f931afd3268229a291c5c8a2bef12bde697da3