CircuitPython - a Python implementation for teaching coding with microcontrollers https://git.suspectdevices.com/suspect-devices/circuitpython/atom?h=encoding 2017-09-23T01:05:51+00:00 2017-09-23T01:05:51+00:00 Scott Shawcroft scott@tannewt.org 2017-09-23T01:05:51+00:00 urn:sha1:6839fff31303463d5c7942387fa498895edf1abf * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178. 2017-09-12T19:09:22+00:00 Asher Lieber lieber.asher@gmail.com 2017-09-12T19:09:22+00:00 urn:sha1:5aa8922038a5f0ee07c7c36a3d8eab0547f585bc Add set_rgb_status_brightness() via `samd.rgb_status_brightness`. Fixes #162. 2017-04-12T22:24:50+00:00 Scott Shawcroft scott.shawcroft@gmail.com 2017-04-12T22:24:50+00:00 urn:sha1:4a4f29b8f95aa67f63397ae4efe78c6994398ccf * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards. 2017-04-10T20:32:19+00:00 Scott Shawcroft scott.shawcroft@gmail.com 2017-04-10T20:32:19+00:00 urn:sha1:f28f8ba56809fd56e777eabceae21127f95b89ed This was done to allow greatly granularity when deciding what functionality is built into each board's build. For example, this way pulseio can be omitted to allow for something else such as touchio. 2017-02-19T16:39:34+00:00 Scott Shawcroft scott.shawcroft@gmail.com 2017-02-19T16:39:34+00:00 urn:sha1:261a6ff0bba17708a9168d4d34166e673040a45b 2016-12-10T03:35:56+00:00 Scott Shawcroft scott.shawcroft@gmail.com 2016-12-10T03:27:41+00:00 urn:sha1:b6f1eebab30b0e687e07cc3e42d9db9fd48aab05 The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63