suspect-devices/circuitpython/ports/stm32/modmachine.c, branch mainCircuitPython - a Python implementation for teaching coding with microcontrollershttps://git.suspectdevices.com/suspect-devices/circuitpython/atom?h=main2019-10-13T15:08:52+00:00remove ports/stm322019-10-13T15:08:52+00:00Dan Halberthalbert@halwitz.org2019-10-13T15:08:52+00:00urn:sha1:fc033bd954a46156d6902392f8ae21ac2872bb1cstm32: Add support for STM32F0 MCUs.2018-05-28T11:49:49+00:00Damien Georgedamien.p.george@gmail.com2018-05-28T08:10:53+00:00urn:sha1:ea7e747979c2f27eb90f9a6ba292c500eb288dd4stm32: Allow a board to disable MICROPY_VFS_FAT.2018-05-28T11:46:20+00:00Damien Georgedamien.p.george@gmail.com2018-05-28T02:01:52+00:00urn:sha1:6d83468a30f79be9baec297c38506da6517732b5stm32: Allow to have no storage support if there are no block devices.2018-05-28T11:45:46+00:00Damien Georgedamien.p.george@gmail.com2018-05-28T00:57:27+00:00urn:sha1:f497723802406c00d84b20fe5fc74b973a128ebc
If no block devices are defined by a board then storage support will be
disabled. This means there is no filesystem provided by either the
internal flash or external SPI flash. But the VFS system can still be
enabled and filesystems provided on external devices like an SD card.
stm32: Don't use %lu or %lx for formatting, use just %u or %x.2018-05-04T05:52:03+00:00Damien Georgedamien.p.george@gmail.com2018-05-04T05:52:03+00:00urn:sha1:cb3456ddfe330c562b7d7dde64df933ab7d987f1
On this 32-bit arch there's no need to use the long version of the format
specifier. It's only there to appease the compiler which checks the type
of the args passed to printf. Removing the "l" saves a bit of code space.
stm32: Allow a board to configure the HSE in bypass mode.2018-04-11T06:46:47+00:00Damien Georgedamien.p.george@gmail.com2018-04-11T06:46:47+00:00urn:sha1:cf9fc7346d91d729e5f6248d4bbbe5cb199cc772
To use HSE bypass mode the board should define:
#define MICROPY_HW_CLK_USE_BYPASS (1)
If this is not defined, or is defined to 0, then HSE oscillator mode is
used.
stm32: Use STM32xx macros instead of MCU_SERIES_xx to select MCU type.2018-03-16T23:42:50+00:00Damien Georgedamien.p.george@gmail.com2018-03-16T23:42:50+00:00urn:sha1:e37b8ba5a55c99dbd1e69eb1c99651307b22fd3e
The CMSIS files for the STM32 range provide macros to distinguish between
the different MCU series: STM32F4, STM32F7, STM32H7, STM32L4, etc. Prefer
to use these instead of custom ones.
stm32/modmachine: Support basic H7 MCU features.2018-03-09T04:10:53+00:00iabdalkaderi.abdalkader@gmail.com2018-02-23T16:54:09+00:00urn:sha1:d151adb791df6f3ac6d12431ad6bcad62f730363stm32: Introduce MICROPY_HW_ENABLE_USB and clean up USB config.2018-02-13T07:51:08+00:00Damien Georgedamien.p.george@gmail.com2018-02-13T07:51:08+00:00urn:sha1:5c320bd0b093f44cad19046d84a63e5ed4e7fc87
This patch allows to completely compile-out support for USB, and no-USB is
now the default. If a board wants to enable USB it should define:
#define MICROPY_HW_ENABLE_USB (1)
And then one or more of the following to select the USB PHY:
#define MICROPY_HW_USB_FS (1)
#define MICROPY_HW_USB_HS (1)
#define MICROPY_HW_USB_HS_IN_FS (1)
stm32: Update HAL macro and constant names to use newer versions.2018-02-13T04:37:35+00:00Damien Georgedamien.p.george@gmail.com2018-02-13T04:37:35+00:00urn:sha1:3eb0694b97c6a8f0e93b874549aac40d8b78b0e5
Newer versions of the HAL use names which are cleaner and more
self-consistent amongst the HAL itself. This patch switches to use those
names in most places so it is easier to update the HAL in the future.