suspect-devices/circuitpython/ports/stm32/stm32_it.c, branch main CircuitPython - a Python implementation for teaching coding with microcontrollers https://git.suspectdevices.com/suspect-devices/circuitpython/atom?h=main 2019-10-13T15:08:52+00:00 remove ports/stm32 2019-10-13T15:08:52+00:00 Dan Halbert halbert@halwitz.org 2019-10-13T15:08:52+00:00 urn:sha1:fc033bd954a46156d6902392f8ae21ac2872bb1c stm32/timer: Support TIM1 on F0 MCUs. 2018-06-15T00:50:08+00:00 Damien George damien.p.george@gmail.com 2018-06-15T00:50:08+00:00 urn:sha1:37a7257affa5e1ad449d911797dfc4b9e46677b3 stm32: Add support for STM32F0 MCUs. 2018-05-28T11:49:49+00:00 Damien George damien.p.george@gmail.com 2018-05-28T08:10:53+00:00 urn:sha1:ea7e747979c2f27eb90f9a6ba292c500eb288dd4 stm32: Add support for Cortex-M0 CPUs. 2018-05-28T11:46:20+00:00 Damien George damien.p.george@gmail.com 2018-05-28T01:23:33+00:00 urn:sha1:070937fe930d5fd19ed9d0f37172d38d8a3d9920 stm32: Allow to have no storage support if there are no block devices. 2018-05-28T11:45:46+00:00 Damien George damien.p.george@gmail.com 2018-05-28T00:57:27+00:00 urn:sha1:f497723802406c00d84b20fe5fc74b973a128ebc If no block devices are defined by a board then storage support will be disabled. This means there is no filesystem provided by either the internal flash or external SPI flash. But the VFS system can still be enabled and filesystems provided on external devices like an SD card. stm32/usb: Guard USB device code with #if for whether USB is enabled. 2018-05-28T11:45:46+00:00 Damien George damien.p.george@gmail.com 2018-05-28T00:46:49+00:00 urn:sha1:aa4a7a8732a8594c932503b50152f8e60053e498 With this change, all the USB source code can now be passed through the compiler even if the MCU does not have a USB peripheral. stm32: Enable UART7/8 on F4 series that have these peripherals. 2018-05-16T01:55:07+00:00 Ryan Shaw ryan.shaw@wisetechglobal.com 2018-05-15T02:46:58+00:00 urn:sha1:b9ff46f1ed5e1468551890ce64a842c77c059ef6 stm32/pyb_i2c: Put pyb.I2C under MICROPY_PY_PYB_LEGACY setting. 2018-05-14T03:53:46+00:00 Damien George damien.p.george@gmail.com 2018-05-14T03:53:46+00:00 urn:sha1:88c26a48b4a3c8850ff2677b2f0ce8c90ba8e660 When disabled, the pyb.I2C class saves around 8k of code space and 172 bytes of RAM. The same functionality is now available in machine.I2C (for F4 and F7 MCUs). It is still enabled by default. stm32: Allow a board to configure the HSE in bypass mode. 2018-04-11T06:46:47+00:00 Damien George damien.p.george@gmail.com 2018-04-11T06:46:47+00:00 urn:sha1:cf9fc7346d91d729e5f6248d4bbbe5cb199cc772 To use HSE bypass mode the board should define: #define MICROPY_HW_CLK_USE_BYPASS (1) If this is not defined, or is defined to 0, then HSE oscillator mode is used. stm32/stm32_it: Add IRQ handler for I2C4. 2018-04-11T06:37:45+00:00 Damien George damien.p.george@gmail.com 2018-04-11T06:37:45+00:00 urn:sha1:68b70fac5cce7bfa3416dd04440e3a7c1979ffc5