suspect-devices/circuitpython/stmhal/boards/ESPRUINO_PICO/mpconfigboard.h, branch mainCircuitPython - a Python implementation for teaching coding with microcontrollershttps://git.suspectdevices.com/suspect-devices/circuitpython/atom?h=main2017-09-06T03:40:51+00:00ports: Make new ports/ sub-directory and move all ports there.2017-09-06T03:40:51+00:00Damien Georgedamien.p.george@gmail.com2017-09-06T03:40:51+00:00urn:sha1:01dd7804b87d60b2deab16712eccb3b97351a9b7
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
stmhal: Reduce size of ESPRUINO_PICO build so it fits in flash.2017-07-12T02:51:37+00:00Damien Georgedamien.p.george@gmail.com2017-07-12T02:51:37+00:00urn:sha1:f1d260d878105bfbf25c0bb68da6190e35fc106a
The default frozen modules are no longer included (but users can still
specify their own via FROZEN_MPY_DIR), complex numbers are disabled and so
are the native, viper and asm_thumb emitters. Users needing these features
can tune the build to disable other things.
stmhal: Move PY_SYS_PLATFORM config from board to general config file.2016-12-13T05:26:45+00:00Damien Georgedamien.p.george@gmail.com2016-12-13T05:21:41+00:00urn:sha1:0f408bc1ff9585ec66431176c993c369cd686a2e
It can be overridden by a board if needed.
stmhal: Refactor UART configuration to use pin objects.2016-12-05T03:26:41+00:00Rami Aliflowergrass@users.noreply.github.com2016-12-05T01:21:45+00:00urn:sha1:27a503f63284a1751f20d7f5295690fec5e1c462
This follows the pattern of other peripherals (I2C, SPI) to specify the
pins using pin objects instead of a pair of GPIO port and pin number. It
makes it easier to customise the UART pins for a particular board.
stmhal/led: Refactor LED to use mp_hal_pin_output() init function.2016-10-18T03:43:05+00:00Damien Georgedamien.p.george@gmail.com2016-10-18T03:43:05+00:00urn:sha1:b4cc68e4a4d656c4b1ae4de8db6a089726f1f572
As part of this patch the MICROPY_HW_LED_OTYPE setting is removed because
it is now unused (all boards anyway had this as OUTPUT_PP).
stmhal: Disable network and usocket for ESPRUINO_PICO2016-10-06T00:47:45+00:00Dave Hylandsdhylands@gmail.com2016-10-05T05:10:44+00:00urn:sha1:c08f50bcf7740885863224509d56229d55ac1193stmhal/diskio: Introduce MICROPY_HW_HAS_FLASH setting.2016-02-06T13:07:01+00:00Paul Sokolovskypfalcon@users.sourceforge.net2016-02-06T12:48:58+00:00urn:sha1:97a0846af906cde677742bff810fb7965c38fbb7
To allow to reuse stmhal/diskio for ports which don't have flash but have
other storage devices.
stmhal: For SPI config, use HW_SPIx_SCK instead of HW_ENABLE_SPIx.2015-12-12T15:02:02+00:00Damien Georgedamien.p.george@gmail.com2015-12-12T15:02:02+00:00urn:sha1:f7c4f9a64048bcbeaf36be8590b352bbef72aa08
Previously, SPI was configured by a board defining MICROPY_HW_ENABLE_SPIx
to 0 or 1. Now, the board should define MICROPY_HW_SPIx_SCK, MISO, MOSI
and NSS. This makes it the same as how I2C is configured.
stmhal: Allow to configure UART pins completely via mpconfigboard.h.2015-05-03T12:48:26+00:00Eero af Heurlinrambo@iki.fi2015-05-02T16:31:39+00:00urn:sha1:2378be4e933dda0f7e7adb2f227530d3fcc3a6aastmhal: Add support for Espruino Pico board.2015-04-18T20:40:59+00:00Damien Georgedamien.p.george@gmail.com2015-04-18T20:27:10+00:00urn:sha1:90e6d0c2ac3dcda46d93b061802692444bd931a4
To build:
make BOARD=ESPRUINO_PICO
To deploy: short the BOOT0/BTN contact on the back of the board (eg by
drawing over it with a graphite pencil), then hold down BTN while
inserting the board into the USB port. The board should then enter DFU
mode, and the firmware can be downloaded using:
make BOARD=ESPRUINO_PICO deploy