suspect-devices/circuitpython/stmhal/boards/NETDUINO_PLUS_2, branch esp-extra-scripts CircuitPython - a Python implementation for teaching coding with microcontrollers https://git.suspectdevices.com/suspect-devices/circuitpython/atom?h=esp-extra-scripts 2016-02-15T10:07:27+00:00 stmhal: Some NETDUINO_PLUS_2 cleanup 2016-02-15T10:07:27+00:00 Dave Hylands dhylands@gmail.com 2016-02-13T05:25:00+00:00 urn:sha1:4b2938a4b0ec6b31691509003cb1eda9458fa2d7 - Put the I2C bus on the corect pins - Add the appropriate board_init to power the shield stmhal/diskio: Introduce MICROPY_HW_HAS_FLASH setting. 2016-02-06T13:07:01+00:00 Paul Sokolovsky pfalcon@users.sourceforge.net 2016-02-06T12:48:58+00:00 urn:sha1:97a0846af906cde677742bff810fb7965c38fbb7 To allow to reuse stmhal/diskio for ports which don't have flash but have other storage devices. stmhal: For SPI config, use HW_SPIx_SCK instead of HW_ENABLE_SPIx. 2015-12-12T15:02:02+00:00 Damien George damien.p.george@gmail.com 2015-12-12T15:02:02+00:00 urn:sha1:f7c4f9a64048bcbeaf36be8590b352bbef72aa08 Previously, SPI was configured by a board defining MICROPY_HW_ENABLE_SPIx to 0 or 1. Now, the board should define MICROPY_HW_SPIx_SCK, MISO, MOSI and NSS. This makes it the same as how I2C is configured. stmhal: Use CMSIS_MCU definition from mpconfigboard.mk 2015-08-07T07:54:14+00:00 Dave Hylands dhylands@gmail.com 2015-08-06T07:03:45+00:00 urn:sha1:872f9af6aed49fa088d89152b983506285e1d34b This needs to land afte #1407 lands, since #1407 is where the CMSIS_MCU was defined. stmhal: Generate modstm constants per build 2015-08-07T07:46:43+00:00 Dave Hylands dhylands@gmail.com 2015-08-02T17:42:09+00:00 urn:sha1:be66a9ecf60eac18e08eda7bddf4b3481459c9f2 This causes unnecessary constants to no longer be generated. Some constants (like UART_BRR) are different between the F4 and F7 stmhal: Update Makefile and board configs to compile with relocated hal. 2015-07-20T11:30:18+00:00 Damien George damien.p.george@gmail.com 2015-07-19T11:17:42+00:00 urn:sha1:a39df51d8ab9137b5852595a26d9aa072b46a697 stmhal: Allow to configure UART pins completely via mpconfigboard.h. 2015-05-03T12:48:26+00:00 Eero af Heurlin rambo@iki.fi 2015-05-02T16:31:39+00:00 urn:sha1:2378be4e933dda0f7e7adb2f227530d3fcc3a6aa stmhal: Make ld and af files configurable within Makefile. 2015-04-18T20:40:59+00:00 Damien George damien.p.george@gmail.com 2015-04-18T20:21:28+00:00 urn:sha1:0435e762507e5513dec6d709b382d3c13b699e0c Each board now needs an mpconfigboard.mk file which defines AF_FILE and LD_FILE. Also moved stm32f405.ld to boards/ directory to keep things organised. stmhal: Make I2C busses and their pins configurable in mpconfigboard.h. 2015-04-18T20:40:59+00:00 Damien George damien.p.george@gmail.com 2015-04-18T15:12:57+00:00 urn:sha1:d15fe5a6b32c669eb7eade36a0558917ff034d37 stmhal: Make HSE PLL parameters configurable per board. 2015-04-18T20:40:58+00:00 Damien George damien.p.george@gmail.com 2015-04-18T14:30:04+00:00 urn:sha1:8bdbc20e74907f57cc1d1659bb256eb51ed55aaf