CircuitPython - a Python implementation for teaching coding with microcontrollers https://git.suspectdevices.com/suspect-devices/circuitpython/atom?h=esp-extra-scripts 2016-05-05T14:19:33+00:00 2016-05-05T14:19:33+00:00 Tobias Badertscher python@baerospace.ch 2016-03-27T09:58:19+00:00 urn:sha1:7441ba7749508ef1731493892a32bf3d821e8cb2 2016-02-15T10:07:27+00:00 Dave Hylands dhylands@gmail.com 2016-02-13T05:25:00+00:00 urn:sha1:4b2938a4b0ec6b31691509003cb1eda9458fa2d7 - Put the I2C bus on the corect pins - Add the appropriate board_init to power the shield 2016-02-10T23:40:10+00:00 Damien George damien.p.george@gmail.com 2016-02-10T16:32:57+00:00 urn:sha1:b33a7705966a743c5e4c0c3c3bb83e6d97b5e84d This patch adds support to fsusermount for multiple block devices (instead of just one). The maximum allowed is fixed at compile time by the size of the fs_user_mount array accessed via MP_STATE_PORT, which in turn is set by MICROPY_FATFS_VOLUMES. With this patch, stmhal (which is still tightly coupled to fsusermount) is also modified to support mounting multiple devices And the flash and SD card are now just two block devices that are mounted at start up if they exist (and they have special native code to make them more efficient). 2016-01-29T22:31:56+00:00 Damien George damien.p.george@gmail.com 2016-01-29T22:31:56+00:00 urn:sha1:ea89b80ff4f842b010f9f8ec3280675f81bc6bc5 TIM3 is no longer used by USB CDC for triggering outgoing data, so we can now make it available to the user. PWM fading on LED(4) is now gone, but will be reinstated in a new way. 2016-01-29T00:13:42+00:00 Paul Sokolovsky pfalcon@users.sourceforge.net 2016-01-28T23:05:53+00:00 urn:sha1:d3b1f0b627ccc6705d9fe958549badb87a74ded1 Calling it from mp_init() is too late for some ports (like Unix), and leads to incomplete stack frame being captured, with following GC issues. So, now each port should call mp_stack_ctrl_init() on its own, ASAP after startup, and taking special precautions so it really was called before stack variables get allocated (because if such variable with a pointer is missed, it may lead to over-collecting (typical symptom is segfaulting)). 2015-12-07T17:21:51+00:00 Dave Hylands dhylands@gmail.com 2015-12-06T07:34:23+00:00 urn:sha1:f380904bd9376216f9bf06bcdc354f6b5800c896 Currently nlr_jump_fail prints that there was an uncaught exception but nothing about the exception. This patch causes nlr_jump_failed to try to print the exception. Given that printf was called on the line above, I think that the call to mp_obj_print_exception has about as much likelyhood of succeeding as the printf does. 2015-12-07T15:11:42+00:00 Dave Hylands dhylands@gmail.com 2015-12-06T07:49:43+00:00 urn:sha1:acc208418bb1fd1f37f64cdbddc6be7a8eaeb4b8 When you use the USER button to perform a filesystem reset at boot time then it wipes out the filesystem and creates a new boot.py and main.py. With this patch these files are executed after formatting, ensuring that pyb and machine modules get imported. 2015-12-04T14:07:15+00:00 Damien George damien.p.george@gmail.com 2015-12-04T14:07:15+00:00 urn:sha1:66b96822fb33863fde5ce13a6bdeb99a404575dc This is a hack to free up TIM3 so that it can be used by the user. Instead we use the PVD irq to call the USB VCP polling function, and trigger it from SysTick (so SysTick itself does not do any processing). The feature is enabled for pyboard lite only, since it lacks timers. 2015-12-04T12:05:05+00:00 Damien George damien.p.george@gmail.com 2015-12-04T12:05:05+00:00 urn:sha1:f7697ff393fa60e2b9adea31960ca17afc1d2ab7 2015-11-23T23:23:07+00:00 T S tsp@esg-workstation.com 2015-11-07T11:03:12+00:00 urn:sha1:86aa16bea61da8a8d156a7a928902a0bf4c85b73 If RTC is already running at boot then it's left alone. Otherwise, RTC is started at boot but startup function returns straight away. RTC startup is then finished the first time it is used. Fallback to LSI if LSE fails to start in a certain time. Also included: MICROPY_HW_CLK_LAST_FREQ hold pyb.freq() parameters in RTC backup reg MICROPY_HW_RTC_USE_US option to present datetime sub-seconds in microseconds MICROPY_HW_RTC_USE_CALOUT option to enable RTC calibration output CLK_LAST_FREQ and RTC_USE_CALOUT are enabled for PYBv1.0.