suspect-devices/circuitpython/stmhal/sdcard.c, branch main

ports: Make new ports/ sub-directory and move all ports there.

2017-09-06T03:40:51+00:00

This is to keep the top-level directory clean, to make it clear what is core and what is a port, and to allow the repository to grow with new ports in a sustainable way.

stmhal: Update to new STM Cube HAL library.

2017-08-29T07:03:28+00:00

This upgrades the HAL to the versions: - F4 V1.16.0 - F7 V1.7.0 - L4 V1.8.1 The main changes were in the SD card driver. The vendor changed the SD read/write functions to accept block number intead of byte address, so there is no longer any need for a custom patch for this in stm32lib. The CardType values also changed, so pyb.SDCard().info() will return different values for the 3rd element of the tuple, but this function was never documented.

all: Use the name MicroPython consistently in comments

2017-07-31T08:35:40+00:00

There were several different spellings of MicroPython present in comments, when there should be only one.

all: Remove trailing spaces, per coding conventions.

2017-07-19T03:12:10+00:00

stmhal/sdcard: Allow a board to customise the SDIO pins.

2017-06-27T02:42:46+00:00

stmhal: Convert all module and method tables to use MP_ROM macros.

2017-05-06T07:03:40+00:00

stmhal/sdcard: Add support for SDMMC2 on F7 MCUs.

2017-03-30T06:55:21+00:00

By default the SDIO (F4) or SDMMC1 (L4, F7) is used as the SD card peripheral, but if a board config defines MICROPY_HW_SDMMC2_CK and other pins then the SD card driver will use SDMMC2.

stmhal: Rename sys_tick ticks/delay functions to corresp. mp_hal ones.

2017-03-02T04:32:32+00:00

The renames are: HAL_Delay -> mp_hal_delay_ms sys_tick_udelay -> mp_hal_delay_us sys_tick_get_microseconds -> mp_hal_ticks_us And mp_hal_ticks_ms is added to provide the full set of timing functions. Also, a separate HAL_Delay function is added which differs slightly from mp_hal_delay_ms and is intended for use only by the ST HAL functions.

stmhal: Use mp_hal_delay_ms instead of HAL_Delay.

2017-03-02T04:02:57+00:00

stmhal: On boot, mount all available partitions of the SD card.

2017-01-31T01:18:08+00:00

The first partition is mounted as "/sd" and subsequent partitions are mounted as "/sd". This is backwards compatible with the previous behaviour, which just mounted the first partition on "/sd". At this point, only FatFs filesystems are mounted.