suspect-devices/circuitpython/stmhal/usbd_conf.c, branch esp-extra-scripts CircuitPython - a Python implementation for teaching coding with microcontrollers https://git.suspectdevices.com/suspect-devices/circuitpython/atom?h=esp-extra-scripts 2016-04-17T11:02:26+00:00 stmhal: L4: Modify usbd_conf.c to support L4 MCU. 2016-04-17T11:02:26+00:00 Damien George damien.p.george@gmail.com 2016-04-17T11:00:34+00:00 urn:sha1:aed1da913b2112c9b1bee6cbe03f5dd9b35334c8 Original patch was authored by Tobias Badertscher / @tobbad, but it was reworked to split UART edits from USB edits. stmhal: Consistently enable USB SOF Irqs for all USB modes (FS and HS). 2016-04-07T08:23:33+00:00 Martin Fischer fischer.carlito@gmail.com 2016-04-06T19:41:52+00:00 urn:sha1:8a8e7750358b7650bf9f96da9e8f4b797562390e SOF irqs are now standard for rx/tx USB transfers, so enable them for both FS and HS modes. Fixes #1944. stmhal: Make USB CDC driver use SOF instead of TIM3 for outgoing data. 2016-01-29T15:21:43+00:00 Damien George damien.p.george@gmail.com 2016-01-09T21:59:15+00:00 urn:sha1:d3631339176b768ce1ffdc535223385245ff906b Previous to this patch the USB CDC driver used TIM3 to trigger the sending of outgoing data over USB serial. This patch changes the behaviour so that the USB SOF interrupt is used to trigger the processing of the sending. This reduces latency and increases bandwidth of outgoing data. Thanks to Martin Fischer, aka @hoihu, for the idea and initial prototype. See PR #1713. stmhal: Enable two USB phys to be supported together. 2015-12-09T09:56:36+00:00 neilh10 neilh20@wLLw.net 2015-12-08T22:02:34+00:00 urn:sha1:1be0fde45c8d84eaf04851af96f06aad8171b2b2 This is refactoring to enable support for the two USB PHYs available on some STM32F4 processors to be used at the same time. The F405/7 & F429 have two USB PHYs, others such as the F411 only have one PHY. This has been tested separately on a pyb10 (USB_FS PHY) and F429DISC (USB_HS PHY) to be able to invoke a REPL/USB. I have modified a PYBV10 to support two PHYs. The long term objective is to support a 2nd USB PHY to be brought up as a USB HOST, and possibly a single USB PHY to be OTG. stmahl: Fix usbd_conf.c for devices which don't have USB_HS at all. 2015-11-26T16:17:26+00:00 Dave Hylands dhylands@gmail.com 2015-11-26T01:09:44+00:00 urn:sha1:061eb6fa6b196ed3d17121acb8282d626fdd6a69 The STMCube examples define both USE_USB_HS and USE_USB_HS_IN_FS when they use the HS in FS mode. The STM32F401 doesn't have a USB_HS at all, so the USB_OTG_HS instance doesn't even exist. stmhal: Add support for the STM32F429I-DISCO kit by STMicro. 2015-11-25T23:53:26+00:00 Tobias Badertscher python@baerospace.ch 2015-11-24T13:35:24+00:00 urn:sha1:8844d031e4bc39cb6e6cd053b63a8cdaeb383221 stmhal: Add symbolic #defines for interrupt levels in irq.h. 2015-11-01T23:23:39+00:00 Dave Curtis davecurtis@sonic.net 2015-10-31T17:44:20+00:00 urn:sha1:32b3549cce7a965d92a81db02c7adc973f08d74c stmhal: Replace #include "stm32f4xx_hal.h" with #include STM32_HAL_H. 2015-07-29T23:38:25+00:00 Dave Hylands dhylands@gmail.com 2015-07-28T15:36:26+00:00 urn:sha1:ea8bf8105812b36fbf1596a78c6e14aa0a0c5a36 stmhal: Exclude USB HS code when USB HS mode not enabled. 2015-04-18T20:40:58+00:00 Damien George damien.p.george@gmail.com 2015-04-18T14:54:56+00:00 urn:sha1:73f1a49137eff094f25bb0049b14cb848a8486c4 py, unix, stmhal: Allow to compile with -Wshadow. 2015-01-20T11:55:10+00:00 Damien George damien.p.george@gmail.com 2015-01-20T11:55:10+00:00 urn:sha1:50912e7f5dc579fd2917537046793dfa30decadf See issue #699.