suspect-devices/circuitpython/supervisor/shared/external_flash/devices.h, branch encoding

atmel-samd: Add SAM E54 Xplained board

2020-06-23T15:41:48+00:00

Few peripherals are actually tested. However, USB, I2C and GPIO seem to work. Most pins are silkscreened with the "PX00" style, so the board module only includes the small number that are screened differently. The default SPI, I2C, and UART are the ones on the EXT2 header. This is arbitrary, but the I2C on this connector is shared with the on-board I2C devices and the PCC header, making it the most versatile.

.../devices.h: Add GigaDevices GD25S512MD 64 MiB flash chip support.

2020-05-29T19:40:56+00:00

Replacing device that was accidentally deleted

2020-05-09T19:00:59+00:00

decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE

2020-04-28T18:51:07+00:00

Merge remote-tracking branch 'adafruit/master'

2020-04-27T20:51:51+00:00

external_flash: add support for mx25r1635f

2020-04-21T01:56:05+00:00

This flash chip is used in Simmel. Signed-off-by: Sean Cross

adds standard (non-queued) SPI support to QSPI for external flash

2020-04-08T01:17:25+00:00

supervisor/shared/external_flash/devices.h: Add MX25L51245G support.

2020-03-25T21:16:09+00:00

Add external flash support for Macronix MX25L51245G 64MiB SPI flash.

samd51 thing plus: new port

2020-02-25T17:52:23+00:00

testing performed: * successfully store and retrieve a 500kB file on the flash * square wave output on each pin appears on o'scope * board.SPI(), board.SERIAL(), board.I2C() all construct

Add support for external flash device Winbond.com W25Q80DV

2020-02-07T00:46:43+00:00

Currently, we only support external flash device W25Q80DL. This adds support for the W25Q80DL. tweak