Adds make config files for SparkFun LumiDrive and Redboard Turbo

8 files changed, 317 insertions, 0 deletions

diff --git a/ports/atmel-samd/boards/sparkfun_lumidrive/board.c b/ports/atmel-samd/boards/sparkfun_lumidrive/board.c
new file mode 100755
index 000000000..c8e20206a
--- /dev/null
+++ b/ports/atmel-samd/boards/sparkfun_lumidrive/board.c
@@ -0,0 +1,38 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "boards/board.h"
+
+void board_init(void)
+{
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}
diff --git a/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h b/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h
new file mode 100755
index 000000000..855b00c6f
--- /dev/null
+++ b/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h
@@ -0,0 +1,51 @@
+#define MICROPY_HW_BOARD_NAME "SparkFun LUMIDrive"
+#define MICROPY_HW_MCU_NAME "samd21g18"
+
+//#define MICROPY_HW_NEOPIXEL (&pin_PA06)
+
+// Clock rates are off: Salae reads 12MHz which is the limit even though we set it to the safer 8MHz.
+#define SPI_FLASH_BAUDRATE  (8000000)
+
+#define SPI_FLASH_MOSI_PIN   &PIN_PA08
+#define SPI_FLASH_MISO_PIN   &PIN_PA14
+#define SPI_FLASH_SCK_PIN    &PIN_PA09
+#define SPI_FLASH_CS_PIN     &PIN_PA13
+
+// All port(pin) definitions should be deleted unless PA06 -- SERCOM0/PAD[2]
+// Will need to scour the repo to figure out why this was done. 
+// I'm guessing these ports are defined elsewehere by default rather than needing to
+// repeatedly define them. Saves time to name outliers than participants in
+// some cases. 
+#define MICROPY_PORT_A    ( 0 )
+#define MICROPY_PORT_B    ( 0 )
+#define MICROPY_PORT_C    ( 0 )
+
+// If you change this, then make sure to update the linker scripts as well to
+// make sure you don't overwrite code.
+#define CIRCUITPY_INTERNAL_NVM_SIZE 256
+
+#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
+
+#define BOARD_HAS_CRYSTAL 1
+
+
+// The LUMIDrive board exposed pins are limited, and I2C, TX/RX, and SPI are not 
+// really exposed but if they are not define (and included in pins.h), Python 
+// won't start/operate. So define here:
+
+//I2C
+#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
+#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
+
+//SPI
+#define DEFAULT_SPI_BUS_SCK (&pin_PA19)
+#define DEFAULT_SPI_BUS_MOSI (&pin_PA18)
+#define DEFAULT_SPI_BUS_MISO (&pin_PA21)
+
+//UART
+#define DEFAULT_UART_BUS_RX (&pin_PA11)
+#define DEFAULT_UART_BUS_TX (&pin_PA10)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.mk b/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.mk
new file mode 100755
index 000000000..bd8fa17e9
--- /dev/null
+++ b/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.mk
@@ -0,0 +1,17 @@
+LD_FILE = boards/samd21x18-bootloader-external-flash.ld
+USB_VID = 0x1B4F
+USB_PID = 0x0017
+USB_PRODUCT = "LUMIDrive Board"
+USB_MANUFACTURER = "SparkFun Electronics"
+
+SPI_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+CHIP_VARIANT = SAMD21G18A
+CHIP_FAMILY = samd21
+
+EXTERNAL_FLASH_DEVICE_COUNT = 1
+EXTERNAL_FLASH_DEVICES = "W25Q32FV"
+
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_DotStar
+
diff --git a/ports/atmel-samd/boards/sparkfun_lumidrive/pins.c b/ports/atmel-samd/boards/sparkfun_lumidrive/pins.c
new file mode 100755
index 000000000..0af932e5b
--- /dev/null
+++ b/ports/atmel-samd/boards/sparkfun_lumidrive/pins.c
@@ -0,0 +1,21 @@
+#include "shared-bindings/board/__init__.h"
+
+#include "board_busses.h"
+
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+    { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA04) },
+    { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA05) },
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA19) },       //
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA18) },      //
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA11) },        //            
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA11) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA10) },        
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA10) },
+    { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA20) },        //
+    { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA06) },        //    
+    { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA07) },
+    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA18) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA17) },        //
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },    
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);
diff --git a/ports/atmel-samd/boards/sparkfun_redboard_turbo/board.c b/ports/atmel-samd/boards/sparkfun_redboard_turbo/board.c
new file mode 100755
index 000000000..c8e20206a
--- /dev/null
+++ b/ports/atmel-samd/boards/sparkfun_redboard_turbo/board.c
@@ -0,0 +1,38 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "boards/board.h"
+
+void board_init(void)
+{
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}
diff --git a/ports/atmel-samd/boards/sparkfun_redboard_turbo/mpconfigboard.h b/ports/atmel-samd/boards/sparkfun_redboard_turbo/mpconfigboard.h
new file mode 100755
index 000000000..4bd872dd3
--- /dev/null
+++ b/ports/atmel-samd/boards/sparkfun_redboard_turbo/mpconfigboard.h
@@ -0,0 +1,100 @@
+#define MICROPY_HW_BOARD_NAME "SparkFun RedBoard Turbo"
+#define MICROPY_HW_MCU_NAME "samd21g18"
+
+
+#define MICROPY_HW_LED_TX   &pin_PA27
+#define MICROPY_HW_LED_RX   &pin_PA31
+
+#define MICROPY_HW_NEOPIXEL (&pin_PA30)
+
+// Clock rates are off: Salae reads 12MHz which is the limit even though we set it to the safer 8MHz.
+#define SPI_FLASH_BAUDRATE  (8000000)
+
+//
+// SPI Flash definitions. The flash SPI MOSI, MISO and SCK need to be on the 
+// same SERCOM - check the SAMD21 spec to determien which SERCOM to use 
+// (post PINs have 2 SERCOMS to work with)
+//
+#define SPI_FLASH_MOSI_PIN          &pin_PB22
+#define SPI_FLASH_MISO_PIN          &pin_PB03
+#define SPI_FLASH_SCK_PIN           &pin_PB23
+#define SPI_FLASH_CS_PIN            &pin_PA13
+
+
+// #define SPI_FLASH_MOSI_PIN_FUNCTION PINMUX_PB22D_SERCOM5_PAD2
+// #define SPI_FLASH_MISO_PIN_FUNCTION PINMUX_PB03D_SERCOM5_PAD1
+// #define SPI_FLASH_SCK_PIN_FUNCTION  PINMUX_PB23D_SERCOM5_PAD3
+// #define SPI_FLASH_SERCOM            SERCOM5
+// #define SPI_FLASH_SERCOM_INDEX      5
+// #define SPI_FLASH_MOSI_PAD          2
+// #define SPI_FLASH_MISO_PAD          1
+// #define SPI_FLASH_SCK_PAD           3
+
+
+// // <o> Transmit Data Pinout
+
+// // 
+// // The logic for DOPO and DIPO is the following
+// // In master SPI operation    
+// //    DIPO  <pad #> = MISO
+// //    DOPO  - Based on the below table, where 
+// //           <DOPO> = [MOSI PAD, SCK PAD]
+// //           <0x0>  = PAD[0,1]
+// //           <0x1>  = PAD[2,3]
+// //           <0x2>  = PAD[3,1]
+// //           <0x3>  = PAD[0,3]
+// //
+// /// For the RedBoard Turbo Board DOPO [2,3] => 1
+// #define SPI_FLASH_DOPO              1   
+// #define SPI_FLASH_DIPO              1   // same as MISO pad
+
+// These are pins not to reset. 
+// This map to the pins as defined above for FLASH. Note the PORT letters - assign A-to-A, B-to-B ..etc
+// PA24 and PA25 are for USB
+
+#define MICROPY_PORT_A        ( 0 ) 
+#define MICROPY_PORT_B        ( 0 )
+#define MICROPY_PORT_C        ( 0 )
+
+
+// If you change this, then make sure to update the linker scripts as well to
+// make sure you don't overwrite code.
+#define CIRCUITPY_INTERNAL_NVM_SIZE 256
+
+#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
+
+
+// What external flash device is being used on this board?
+// The devices are defined in "exteral_flash/devices.h", which 
+// contains a flash struct def and a list of #defines for each
+// supported/defined flash module. 
+//
+// This board - the LUMIDrive - uses a W25Q32FV component. It's 
+// definition was added to devices.h, based on the winbond spec sheet.
+//
+// You can list N number of devices - just update the count define and comma 
+// seperate the EXTERNAL_FLASH_DEVICES list of devices.  
+                               
+// #define EXTERNAL_FLASH_DEVICE_COUNT 1
+// #define EXTERNAL_FLASH_DEVICES W25Q32FV
+
+
+#define BOARD_HAS_CRYSTAL 1
+
+
+// I2C - also QWIIC
+#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
+#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
+
+
+#define DEFAULT_SPI_BUS_SCK (&pin_PB11)
+#define DEFAULT_SPI_BUS_MOSI (&pin_PB10)
+#define DEFAULT_SPI_BUS_MISO (&pin_PA12)
+
+
+#define DEFAULT_UART_BUS_RX (&pin_PA11)
+#define DEFAULT_UART_BUS_TX (&pin_PA10)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
diff --git a/ports/atmel-samd/boards/sparkfun_redboard_turbo/mpconfigboard.mk b/ports/atmel-samd/boards/sparkfun_redboard_turbo/mpconfigboard.mk
new file mode 100755
index 000000000..63f61efe1
--- /dev/null
+++ b/ports/atmel-samd/boards/sparkfun_redboard_turbo/mpconfigboard.mk
@@ -0,0 +1,14 @@
+LD_FILE = boards/samd21x18-bootloader-external-flash.ld
+USB_VID = 0x1B4F
+USB_PID = 0x0015
+USB_PRODUCT = "RedBoard Turbo Board"
+USB_MANUFACTURER = "SparkFun Electronics"
+
+SPI_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+CHIP_VARIANT = SAMD21G18A
+CHIP_FAMILY = samd21
+
+EXTERNAL_FLASH_DEVICE_COUNT = 1
+EXTERNAL_FLASH_DEVICES = "W25Q32FV"
diff --git a/ports/atmel-samd/boards/sparkfun_redboard_turbo/pins.c b/ports/atmel-samd/boards/sparkfun_redboard_turbo/pins.c
new file mode 100755
index 000000000..ed284868b
--- /dev/null
+++ b/ports/atmel-samd/boards/sparkfun_redboard_turbo/pins.c
@@ -0,0 +1,38 @@
+#include "shared-bindings/board/__init__.h"
+
+#include "board_busses.h"
+
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) },
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB08) },
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PB09) },
+    { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA04) },
+    { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA05) },
+    { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PB02) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA11) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA11) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA10) },
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA10) },
+    { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA14) },
+    { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA09) },
+    { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA08) },
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA15) },
+    { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA20) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PA21) },
+    { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA06) },
+    { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA07) },
+    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA18) },
+    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA16) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA19) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA17) },
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA22) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA23) },
+    { MP_ROM_QSTR(MP_QSTR_RGB_LED), MP_ROM_PTR(&pin_PA30) },
+    { MP_ROM_QSTR(MP_QSTR_SCK),  MP_ROM_PTR(&pin_PB11) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PB10) },
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA12) },
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);
\ No newline at end of file