Merge pull request #3105 from weblate/weblate-circuitpython-main6.0.0-alpha.1

Translations update from Weblate

13 files changed, 141 insertions, 63 deletions

diff --git a/locale/ID.po b/locale/ID.po
index da4f7b904..44d3bfde2 100644
--- a/locale/ID.po
+++ b/locale/ID.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -429,7 +429,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -599,6 +600,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Tidak dapat menginisialisasi UART"
@@ -993,7 +998,8 @@ msgstr "Pin untuk channel kanan tidak valid"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
diff --git a/locale/cs.po b/locale/cs.po
index 902998539..dfe1cfa38 100644
--- a/locale/cs.po
+++ b/locale/cs.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: 2020-05-24 03:22+0000\n"
 "Last-Translator: dronecz <mzuzelka@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -433,7 +433,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -597,6 +598,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
@@ -990,7 +995,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
diff --git a/locale/de_DE.po b/locale/de_DE.po
index 3b7c49b39..f2d925856 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: 2020-06-16 18:24+0000\n"
 "Last-Translator: Andreas Buchen <andreas.buchen@gmail.com>\n"
 "Language: de_DE\n"
@@ -436,7 +436,8 @@ msgstr "Der Puffer ist zu klein"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "Die Pufferlänge %d ist zu groß. Sie muss kleiner als %d sein"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -607,6 +608,10 @@ msgstr "Beschädigter raw code"
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Konnte UART nicht initialisieren"
@@ -1007,7 +1012,8 @@ msgstr "Ungültiger Pin für rechten Kanal"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
diff --git a/locale/es.po b/locale/es.po
index 903402406..423d67361 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: 2020-06-29 13:13+0000\n"
 "Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n"
 "Language-Team: \n"
@@ -438,7 +438,8 @@ msgstr "El buffer es muy pequeño"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "La longitud del buffer %d es muy grande. Debe ser menor a %d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -606,6 +607,10 @@ msgstr "Código crudo corrupto"
 msgid "Could not initialize GNSS"
 msgstr "No se pudo inicializar el GNSS"
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "No se puede inicializar la UART"
@@ -1002,7 +1007,8 @@ msgstr "Pin inválido para canal derecho"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
diff --git a/locale/fil.po b/locale/fil.po
index ff5cc6426..348931613 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -431,7 +431,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -598,6 +599,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Hindi ma-initialize ang UART"
@@ -998,7 +1003,8 @@ msgstr "Mali ang pin para sa kanang channel"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
diff --git a/locale/fr.po b/locale/fr.po
index 7facdef04..2db7f4722 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: 2020-06-05 17:29+0000\n"
 "Last-Translator: aberwag <aberwag@gmail.com>\n"
 "Language: fr\n"
@@ -441,7 +441,8 @@ msgstr "Le tampon est trop petit"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "La longueur du tampon %d est trop grande. Il doit être inférieur à %d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -614,6 +615,10 @@ msgstr "Code brut corrompu"
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "L'UART n'a pu être initialisé"
@@ -1011,7 +1016,8 @@ msgstr "Broche invalide pour le canal droit"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
diff --git a/locale/it_IT.po b/locale/it_IT.po
index 983b47b82..bd49e2388 100644
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -431,7 +431,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -599,6 +600,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Impossibile inizializzare l'UART"
@@ -1000,7 +1005,8 @@ msgstr "Pin non valido per il canale destro"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
diff --git a/locale/ko.po b/locale/ko.po
index ea3f56470..4bd56cde1 100644
--- a/locale/ko.po
+++ b/locale/ko.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: 2019-05-06 14:22-0700\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -429,7 +429,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -593,6 +594,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
@@ -986,7 +991,8 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
diff --git a/locale/nl.po b/locale/nl.po
index 12a767b18..34e9c835a 100644
--- a/locale/nl.po
+++ b/locale/nl.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
-"PO-Revision-Date: 2020-06-02 19:50+0000\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
+"PO-Revision-Date: 2020-07-02 20:42+0000\n"
 "Last-Translator: _fonzlate <vooralfred@gmail.com>\n"
 "Language-Team: none\n"
 "Language: nl\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.1-dev\n"
+"X-Generator: Weblate 4.2-dev\n"
 
 #: main.c
 msgid ""
@@ -68,7 +68,7 @@ msgstr "%d adres pins en %d RGB pins geven een hoogte van %d aan, niet %d"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q failure: %d"
-msgstr ""
+msgstr "%q fout: %d"
 
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -99,7 +99,7 @@ msgstr "%q moet een tuple van lengte 2 zijn"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q pin invalid"
-msgstr ""
+msgstr "%q pin onjuist"
 
 #: shared-bindings/fontio/BuiltinFont.c
 msgid "%q should be an int"
@@ -435,9 +435,10 @@ msgstr "Buffer is te klein"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "Buffer lengte %d te groot. Het moet kleiner zijn dan %d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
-msgstr ""
+msgstr "Buffer lengte moet een veelvoud van 512 zijn"
 
 #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
@@ -603,7 +604,11 @@ msgstr "Corrupt raw code"
 
 #: ports/cxd56/common-hal/gnss/GNSS.c
 msgid "Could not initialize GNSS"
-msgstr ""
+msgstr "Kan GNSS niet initialiseren"
+
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr "Kan SDCard niet initialiseren"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
@@ -893,7 +898,7 @@ msgstr "Interne fout #%d"
 
 #: shared-bindings/sdioio/SDCard.c
 msgid "Invalid %q"
-msgstr ""
+msgstr "Ongeldige %q"
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
@@ -1002,7 +1007,8 @@ msgstr "Ongeldige pin voor rechter kanaal"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1411,7 +1417,7 @@ msgstr "Draaiende in veilige modus! Opgeslagen code wordt niet uitgevoerd.\n"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "SD card CSD format not supported"
-msgstr ""
+msgstr "SD kaart CSD formaat niet ondersteund"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
@@ -1483,7 +1489,7 @@ msgstr "Geef op zijn minst 1 UART pin op"
 
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
-msgstr ""
+msgstr "Systeem invoer moet gnss.SatelliteSystem zijn"
 
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
@@ -2056,7 +2062,7 @@ msgstr "kan geen niet-'None' waarde naar een net gestartte generator sturen"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "can't set 512 block size"
-msgstr ""
+msgstr "kan geen 512 blokgrootte instellen"
 
 #: py/objnamedtuple.c
 msgid "can't set attribute"
@@ -2187,7 +2193,7 @@ msgstr "kon de Vandermonde matrix niet omkeren"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "couldn't determine SD card version"
-msgstr ""
+msgstr "kon SD kaart versie niet bepalen"
 
 #: extmod/ulab/code/approx.c
 msgid "data must be iterable"
@@ -2754,7 +2760,7 @@ msgstr "negatieve verschuivingstelling (shift count)"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "no SD card"
-msgstr ""
+msgstr "geen SD kaart"
 
 #: py/vm.c
 msgid "no active exception to reraise"
@@ -2779,7 +2785,7 @@ msgstr "geen reset pin beschikbaar"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
-msgstr ""
+msgstr "geen antwoord van SD kaart"
 
 #: py/runtime.c
 msgid "no such attribute"
@@ -3075,7 +3081,7 @@ msgstr "de slaapduur mag niet negatief zijn"
 
 #: extmod/ulab/code/ndarray.c
 msgid "slice step can't be zero"
-msgstr ""
+msgstr "segmentstap mag niet nul zijn"
 
 #: py/objslice.c py/sequence.c
 msgid "slice step cannot be zero"
@@ -3095,15 +3101,15 @@ msgstr "sorteerargument moet een ndarray zijn"
 
 #: extmod/ulab/code/filter.c
 msgid "sos array must be of shape (n_section, 6)"
-msgstr ""
+msgstr "sos array moet vorm (n_section, 6) hebben"
 
 #: extmod/ulab/code/filter.c
 msgid "sos[:, 3] should be all ones"
-msgstr ""
+msgstr "sos[:, 3] moeten allemaal 1 zijn"
 
 #: extmod/ulab/code/filter.c
 msgid "sosfilt requires iterable arguments"
-msgstr ""
+msgstr "sosfilt vereist itereerbare argumenten"
 
 #: py/objstr.c
 msgid "start/end indices"
@@ -3192,11 +3198,11 @@ msgstr "timeout moet groter dan 0.0 zijn"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "timeout waiting for v1 card"
-msgstr ""
+msgstr "timeout bij wachten op v1 kaart"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "timeout waiting for v2 card"
-msgstr ""
+msgstr "timeout bij wachten op v2 kaart"
 
 #: shared-bindings/time/__init__.c
 msgid "timestamp out of range for platform time_t"
@@ -3397,15 +3403,15 @@ msgstr "nul-stap"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be an ndarray"
-msgstr ""
+msgstr "zi moet een ndarray zijn"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be of float type"
-msgstr ""
+msgstr "zi moet van type float zijn"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be of shape (n_section, 2)"
-msgstr ""
+msgstr "zi moet vorm (n_section, 2) hebben"
 
 #~ msgid "I2C operation not supported"
 #~ msgstr "I2C actie niet ondersteund"
diff --git a/locale/pl.po b/locale/pl.po
index d626e8ebc..772448131 100644
--- a/locale/pl.po
+++ b/locale/pl.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: 2019-03-19 18:37-0700\n"
 "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n"
 "Language-Team: pl\n"
@@ -428,7 +428,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -592,6 +593,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Ustawienie UART nie powiodło się"
@@ -987,7 +992,8 @@ msgstr "Zła nóżka dla prawego kanału"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index 92cf0172d..99e59304c 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
-"PO-Revision-Date: 2020-07-02 02:02+0000\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
+"PO-Revision-Date: 2020-07-02 13:32+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -441,7 +441,8 @@ msgstr "O buffer é muito pequeno"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "O tamanho do buffer %d é muito grande. Deve ser menor que %d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr "O comprimento do Buffer deve ser um múltiplo de 512"
 
@@ -612,6 +613,10 @@ msgstr "Código bruto corrompido"
 msgid "Could not initialize GNSS"
 msgstr "Não foi possível inicializar o GNSS"
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Não foi possível inicializar o UART"
@@ -1009,7 +1014,8 @@ msgstr "Pino inválido para canal direito"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -3405,7 +3411,7 @@ msgstr "tipo da saída incorreta"
 
 #: shared-module/displayio/Shape.c
 msgid "x value out of bounds"
-msgstr "a valor x está fora dos limites"
+msgstr "o valor x está fora dos limites"
 
 #: shared-bindings/displayio/Shape.c
 msgid "y should be an int"
diff --git a/locale/sv.po b/locale/sv.po
index f359eba27..3ec91c19e 100644
--- a/locale/sv.po
+++ b/locale/sv.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: 2020-06-03 18:59+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -435,7 +435,8 @@ msgstr "Bufferten är för liten"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "Buffertlängd %d för stor. Den måste vara mindre än %d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -605,6 +606,10 @@ msgstr "Korrupt rå kod"
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Det gick inte att initiera UART"
@@ -1000,7 +1005,8 @@ msgstr "Ogiltig pinne för höger kanal"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po
index bc9a7253b..db41adb53 100644
--- a/locale/zh_Latn_pinyin.po
+++ b/locale/zh_Latn_pinyin.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: 2019-04-13 10:10-0700\n"
 "Last-Translator: hexthat\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@@ -434,7 +434,8 @@ msgstr "Huǎnchōng qū tài xiǎo"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "Huǎnchōng qū chángdù%d tài dà. Tā bìxū xiǎoyú%d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -600,6 +601,10 @@ msgstr "Sǔnhuài de yuánshǐ dàimǎ"
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Wúfǎ chūshǐhuà UART"
@@ -995,7 +1000,8 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"