Fixed indentation

4 files changed, 205 insertions, 205 deletions

diff --git a/shared-bindings/busio/I2C.c b/shared-bindings/busio/I2C.c
index 31dd9a7bf..98ccbb512 100644
--- a/shared-bindings/busio/I2C.c
+++ b/shared-bindings/busio/I2C.c
@@ -85,9 +85,9 @@ STATIC mp_obj_t busio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, con
     return (mp_obj_t)self;
 }
 
-//| def deinit(self, ) -> Any:
-//|     """Releases control of the underlying hardware so other classes can use it."""
-//|     ...
+//|     def deinit(self, ) -> Any:
+//|         """Releases control of the underlying hardware so other classes can use it."""
+//|         ...
 STATIC mp_obj_t busio_i2c_obj_deinit(mp_obj_t self_in) {
     busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in);
     common_hal_busio_i2c_deinit(self);
@@ -101,15 +101,15 @@ STATIC void check_for_deinit(busio_i2c_obj_t *self) {
     }
 }
 
-//| def __enter__(self, ) -> Any:
-//|     """No-op used in Context Managers."""
-//|     ...
+//|     def __enter__(self, ) -> Any:
+//|         """No-op used in Context Managers."""
+//|         ...
 //  Provided by context manager helper.
 
-//| def __exit__(self, ) -> Any:
-//|     """Automatically deinitializes the hardware on context exit. See
-//|     :ref:`lifetime-and-contextmanagers` for more info."""
-//|     ...
+//|     def __exit__(self, ) -> Any:
+//|         """Automatically deinitializes the hardware on context exit. See
+//|         :ref:`lifetime-and-contextmanagers` for more info."""
+//|         ...
 STATIC mp_obj_t busio_i2c_obj___exit__(size_t n_args, const mp_obj_t *args) {
     (void)n_args;
     common_hal_busio_i2c_deinit(args[0]);
@@ -124,14 +124,14 @@ static void check_lock(busio_i2c_obj_t *self) {
     }
 }
 
-//| def scan(self, ) -> Any:
+//|     def scan(self, ) -> Any:
 //|
-//|      """Scan all I2C addresses between 0x08 and 0x77 inclusive and return a
-//|      list of those that respond.
+//|          """Scan all I2C addresses between 0x08 and 0x77 inclusive and return a
+//|          list of those that respond.
 //|
-//|      :return: List of device ids on the I2C bus
-//|      :rtype: list"""
-//|      ...
+//|          :return: List of device ids on the I2C bus
+//|          :rtype: list"""
+//|          ...
 STATIC mp_obj_t busio_i2c_scan(mp_obj_t self_in) {
     busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in);
     check_for_deinit(self);
@@ -148,12 +148,12 @@ STATIC mp_obj_t busio_i2c_scan(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_scan_obj, busio_i2c_scan);
 
-//| def try_lock(self, ) -> Any:
-//|     """Attempts to grab the I2C lock. Returns True on success.
+//|     def try_lock(self, ) -> Any:
+//|         """Attempts to grab the I2C lock. Returns True on success.
 //|
-//|     :return: True when lock has been grabbed
-//|     :rtype: bool"""
-//|     ...
+//|         :return: True when lock has been grabbed
+//|         :rtype: bool"""
+//|         ...
 STATIC mp_obj_t busio_i2c_obj_try_lock(mp_obj_t self_in) {
     busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in);
     check_for_deinit(self);
@@ -161,9 +161,9 @@ STATIC mp_obj_t busio_i2c_obj_try_lock(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_try_lock_obj, busio_i2c_obj_try_lock);
 
-//| def unlock(self, ) -> Any:
-//|     """Releases the I2C lock."""
-//|     ...
+//|     def unlock(self, ) -> Any:
+//|         """Releases the I2C lock."""
+//|         ...
 STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) {
     busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in);
     check_for_deinit(self);
@@ -172,20 +172,20 @@ STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_unlock_obj, busio_i2c_obj_unlock);
 
-//| def readfrom_into(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None) -> Any:
-//|      """Read into ``buffer`` from the slave specified by ``address``.
-//|      The number of bytes read will be the length of ``buffer``.
-//|      At least one byte must be read.
+//|     def readfrom_into(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None) -> Any:
+//|          """Read into ``buffer`` from the slave specified by ``address``.
+//|          The number of bytes read will be the length of ``buffer``.
+//|          At least one byte must be read.
 //|
-//|      If ``start`` or ``end`` is provided, then the buffer will be sliced
-//|      as if ``buffer[start:end]``. This will not cause an allocation like
-//|      ``buf[start:end]`` will so it saves memory.
+//|          If ``start`` or ``end`` is provided, then the buffer will be sliced
+//|          as if ``buffer[start:end]``. This will not cause an allocation like
+//|          ``buf[start:end]`` will so it saves memory.
 //|
-//|      :param int address: 7-bit device address
-//|      :param bytearray buffer: buffer to write into
-//|      :param int start: Index to start writing at
-//|      :param int end: Index to write up to but not include. Defaults to ``len(buffer)``"""
-//|      ...
+//|          :param int address: 7-bit device address
+//|          :param bytearray buffer: buffer to write into
+//|          :param int start: Index to start writing at
+//|          :param int end: Index to write up to but not include. Defaults to ``len(buffer)``"""
+//|          ...
 // Shared arg parsing for readfrom_into and writeto_then_readfrom.
 STATIC void readfrom(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end) {
     mp_buffer_info_t bufinfo;
@@ -223,26 +223,26 @@ STATIC mp_obj_t busio_i2c_readfrom_into(size_t n_args, const mp_obj_t *pos_args,
 }
 MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_readfrom_into_obj, 3, busio_i2c_readfrom_into);
 
-//| def writeto(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None, stop: bool = True) -> Any:
-//|      """Write the bytes from ``buffer`` to the slave specified by ``address``.
-//|      Transmits a stop bit when stop is True. Setting stop=False is deprecated and stop will be
-//|      removed in CircuitPython 6.x. Use `writeto_then_readfrom` when needing a write, no stop and
-//|      repeated start before a read.
+//|     def writeto(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None, stop: bool = True) -> Any:
+//|          """Write the bytes from ``buffer`` to the slave specified by ``address``.
+//|          Transmits a stop bit when stop is True. Setting stop=False is deprecated and stop will be
+//|          removed in CircuitPython 6.x. Use `writeto_then_readfrom` when needing a write, no stop and
+//|          repeated start before a read.
 //|
-//|      If ``start`` or ``end`` is provided, then the buffer will be sliced
-//|      as if ``buffer[start:end]``. This will not cause an allocation like
-//|      ``buffer[start:end]`` will so it saves memory.
+//|          If ``start`` or ``end`` is provided, then the buffer will be sliced
+//|          as if ``buffer[start:end]``. This will not cause an allocation like
+//|          ``buffer[start:end]`` will so it saves memory.
 //|
-//|      Writing a buffer or slice of length zero is permitted, as it can be used
-//|      to poll for the existence of a device.
+//|         Writing a buffer or slice of length zero is permitted, as it can be used
+//|          to poll for the existence of a device.
 //|
-//|      :param int address: 7-bit device address
-//|      :param bytearray buffer: buffer containing the bytes to write
-//|      :param int start: Index to start writing from
-//|      :param int end: Index to read up to but not include. Defaults to ``len(buffer)``
-//|      :param bool stop: If true, output an I2C stop condition after the buffer is written.
-//|                        Deprecated. Will be removed in 6.x and act as stop=True."""
-//|      ...
+//|          :param int address: 7-bit device address
+//|          :param bytearray buffer: buffer containing the bytes to write
+//|          :param int start: Index to start writing from
+//|          :param int end: Index to read up to but not include. Defaults to ``len(buffer)``
+//|          :param bool stop: If true, output an I2C stop condition after the buffer is written.
+//|                            Deprecated. Will be removed in 6.x and act as stop=True."""
+//|          ...
 // Shared arg parsing for writeto and writeto_then_readfrom.
 STATIC void writeto(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end, bool stop) {
     // get the buffer to write the data from
@@ -281,23 +281,23 @@ STATIC mp_obj_t busio_i2c_writeto(size_t n_args, const mp_obj_t *pos_args, mp_ma
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_writeto_obj, 1, busio_i2c_writeto);
 
-//| def writeto_then_readfrom(self, address: int, out_buffer: bytearray, in_buffer: bytearray, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> Any:
-//|      """Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop
-//|      bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and
-//|      ``in_buffer`` can be the same buffer because they are used sequentially.
+//|     def writeto_then_readfrom(self, address: int, out_buffer: bytearray, in_buffer: bytearray, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> Any:
+//|          """Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop
+//|          bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and
+//|          ``in_buffer`` can be the same buffer because they are used sequentially.
 //|
-//|      If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced
-//|      as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]``
-//|      will so it saves memory.
+//|         If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced
+//|          as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]``
+//|          will so it saves memory.
 //|
-//|      :param int address: 7-bit device address
-//|      :param bytearray out_buffer: buffer containing the bytes to write
-//|      :param bytearray in_buffer: buffer to write into
-//|      :param int out_start: Index to start writing from
-//|      :param int out_end: Index to read up to but not include. Defaults to ``len(buffer)``
-//|      :param int in_start: Index to start writing at
-//|      :param int in_end: Index to write up to but not include. Defaults to ``len(buffer)``"""
-//|      ...
+//|          :param int address: 7-bit device address
+//|          :param bytearray out_buffer: buffer containing the bytes to write
+//|          :param bytearray in_buffer: buffer to write into
+//|          :param int out_start: Index to start writing from
+//|          :param int out_end: Index to read up to but not include. Defaults to ``len(buffer)``
+//|          :param int in_start: Index to start writing at
+//|          :param int in_end: Index to write up to but not include. Defaults to ``len(buffer)``"""
+//|          ...
 STATIC mp_obj_t busio_i2c_writeto_then_readfrom(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
     enum { ARG_address, ARG_out_buffer, ARG_in_buffer, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end };
     static const mp_arg_t allowed_args[] = {
diff --git a/shared-bindings/busio/OneWire.c b/shared-bindings/busio/OneWire.c
index 09a76decc..e44c876c5 100644
--- a/shared-bindings/busio/OneWire.c
+++ b/shared-bindings/busio/OneWire.c
@@ -79,9 +79,9 @@ STATIC mp_obj_t busio_onewire_make_new(const mp_obj_type_t *type, size_t n_args,
     return MP_OBJ_FROM_PTR(self);
 }
 
-//| def deinit(self, ) -> Any:
-//|     """Deinitialize the OneWire bus and release any hardware resources for reuse."""
-//|     ...
+//|     def deinit(self, ) -> Any:
+//|         """Deinitialize the OneWire bus and release any hardware resources for reuse."""
+//|         ...
 STATIC mp_obj_t busio_onewire_deinit(mp_obj_t self_in) {
     busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in);
     common_hal_busio_onewire_deinit(self);
@@ -95,15 +95,15 @@ STATIC void check_for_deinit(busio_onewire_obj_t *self) {
     }
 }
 
-//| def __enter__(self, ) -> Any:
-//|     """No-op used by Context Managers."""
-//|     ...
+//|     def __enter__(self, ) -> Any:
+//|         """No-op used by Context Managers."""
+//|         ...
 //  Provided by context manager helper.
 
-//| def __exit__(self, ) -> Any:
-//|     """Automatically deinitializes the hardware when exiting a context. See
-//|     :ref:`lifetime-and-contextmanagers` for more info."""
-//|     ...
+//|     def __exit__(self, ) -> Any:
+//|         """Automatically deinitializes the hardware when exiting a context. See
+//|         :ref:`lifetime-and-contextmanagers` for more info."""
+//|         ...
 STATIC mp_obj_t busio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args) {
     (void)n_args;
     common_hal_busio_onewire_deinit(args[0]);
@@ -111,12 +111,12 @@ STATIC mp_obj_t busio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args)
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_onewire___exit___obj, 4, 4, busio_onewire_obj___exit__);
 
-//| def reset(self, ) -> Any:
-//|     """Reset the OneWire bus and read presence
+//|     def reset(self, ) -> Any:
+//|         """Reset the OneWire bus and read presence
 //|
-//|     :returns: False when at least one device is present
-//|     :rtype: bool"""
-//|     ...
+//|         :returns: False when at least one device is present
+//|         :rtype: bool"""
+//|         ...
 STATIC mp_obj_t busio_onewire_obj_reset(mp_obj_t self_in) {
     busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in);
     check_for_deinit(self);
@@ -125,12 +125,12 @@ STATIC mp_obj_t busio_onewire_obj_reset(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_reset_obj, busio_onewire_obj_reset);
 
-//| def read_bit(self, ) -> Any:
-//|     """Read in a bit
+//|     def read_bit(self, ) -> Any:
+//|         """Read in a bit
 //|
-//|     :returns: bit state read
-//|     :rtype: bool"""
-//|     ...
+//|         :returns: bit state read
+//|         :rtype: bool"""
+//|         ...
 STATIC mp_obj_t busio_onewire_obj_read_bit(mp_obj_t self_in) {
     busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in);
     check_for_deinit(self);
@@ -139,9 +139,9 @@ STATIC mp_obj_t busio_onewire_obj_read_bit(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_read_bit_obj, busio_onewire_obj_read_bit);
 
-//| def write_bit(self, value: Any) -> Any:
-//|     """Write out a bit based on value."""
-//|     ...
+//|     def write_bit(self, value: Any) -> Any:
+//|         """Write out a bit based on value."""
+//|         ...
 STATIC mp_obj_t busio_onewire_obj_write_bit(mp_obj_t self_in, mp_obj_t bool_obj) {
     busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in);
     check_for_deinit(self);
diff --git a/shared-bindings/busio/SPI.c b/shared-bindings/busio/SPI.c
index 9644f4eb5..93588d087 100644
--- a/shared-bindings/busio/SPI.c
+++ b/shared-bindings/busio/SPI.c
@@ -101,9 +101,9 @@ STATIC mp_obj_t busio_spi_make_new(const mp_obj_type_t *type, size_t n_args, con
     return MP_OBJ_FROM_PTR(self);
 }
 
-//| def deinit(self, ) -> Any:
-//|     """Turn off the SPI bus."""
-//|     ...
+//|     def deinit(self, ) -> Any:
+//|         """Turn off the SPI bus."""
+//|         ...
 STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) {
     busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in);
     common_hal_busio_spi_deinit(self);
@@ -111,15 +111,15 @@ STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_deinit_obj, busio_spi_obj_deinit);
 
-//| def __enter__(self, ) -> Any:
-//|     """No-op used by Context Managers.
-//|     Provided by context manager helper."""
-//|     ...
+//|     def __enter__(self, ) -> Any:
+//|         """No-op used by Context Managers.
+//|         Provided by context manager helper."""
+//|         ...
 
-//| def __exit__(self, ) -> Any:
-//|     """Automatically deinitializes the hardware when exiting a context. See
-//|     :ref:`lifetime-and-contextmanagers` for more info."""
-//|     ...
+//|     def __exit__(self, ) -> Any:
+//|         """Automatically deinitializes the hardware when exiting a context. See
+//|         :ref:`lifetime-and-contextmanagers` for more info."""
+//|         ...
 STATIC mp_obj_t busio_spi_obj___exit__(size_t n_args, const mp_obj_t *args) {
     (void)n_args;
     common_hal_busio_spi_deinit(args[0]);
@@ -140,28 +140,28 @@ STATIC void check_for_deinit(busio_spi_obj_t *self) {
     }
 }
 
-//| def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any:
-//|     """Configures the SPI bus. The SPI object must be locked.
+//|     def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any:
+//|         """Configures the SPI bus. The SPI object must be locked.
 //|
-//|     :param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower
-//|       due to the granularity of available clock settings.
-//|       Check the `frequency` attribute for the actual clock rate.
-//|     :param int polarity: the base state of the clock line (0 or 1)
-//|     :param int phase: the edge of the clock that data is captured. First (0)
-//|       or second (1). Rising or falling depends on clock polarity.
-//|     :param int bits: the number of bits per word
+//|        :param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower
+//|           due to the granularity of available clock settings.
+//|           Check the `frequency` attribute for the actual clock rate.
+//|         :param int polarity: the base state of the clock line (0 or 1)
+//|         :param int phase: the edge of the clock that data is captured. First (0)
+//|           or second (1). Rising or falling depends on clock polarity.
+//|         :param int bits: the number of bits per word
 //|
-//|     .. note:: On the SAMD21, it is possible to set the baudrate to 24 MHz, but that
-//|        speed is not guaranteed to work. 12 MHz is the next available lower speed, and is
-//|        within spec for the SAMD21.
+//|        .. note:: On the SAMD21, it is possible to set the baudrate to 24 MHz, but that
+//|            speed is not guaranteed to work. 12 MHz is the next available lower speed, and is
+//|            within spec for the SAMD21.
 //|
-//|     .. note:: On the nRF52840, these baudrates are available: 125kHz, 250kHz, 1MHz, 2MHz, 4MHz,
-//|       and 8MHz.
-//|       If you pick a a baudrate other than one of these, the nearest lower
-//|       baudrate will be chosen, with a minimum of 125kHz.
-//|       Two SPI objects may be created, except on the Circuit Playground Bluefruit,
-//|       which allows only one (to allow for an additional I2C object)."""
-//|     ...
+//|         .. note:: On the nRF52840, these baudrates are available: 125kHz, 250kHz, 1MHz, 2MHz, 4MHz,
+//|           and 8MHz.
+//|           If you pick a a baudrate other than one of these, the nearest lower
+//|           baudrate will be chosen, with a minimum of 125kHz.
+//|           Two SPI objects may be created, except on the Circuit Playground Bluefruit,
+//|           which allows only one (to allow for an additional I2C object)."""
+//|         ...
 
 STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
     enum { ARG_baudrate, ARG_polarity, ARG_phase, ARG_bits };
@@ -198,12 +198,12 @@ STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_
 }
 MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_configure_obj, 1, busio_spi_configure);
 
-//| def try_lock(self, ) -> Any:
-//|     """Attempts to grab the SPI lock. Returns True on success.
+//|     def try_lock(self, ) -> Any:
+//|         """Attempts to grab the SPI lock. Returns True on success.
 //|
-//|     :return: True when lock has been grabbed
-//|     :rtype: bool"""
-//|     ...
+//|         :return: True when lock has been grabbed
+//|         :rtype: bool"""
+//|         ...
 
 STATIC mp_obj_t busio_spi_obj_try_lock(mp_obj_t self_in) {
     busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in);
@@ -211,9 +211,9 @@ STATIC mp_obj_t busio_spi_obj_try_lock(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_try_lock_obj, busio_spi_obj_try_lock);
 
-//| def unlock(self, ) -> Any:
-//|     """Releases the SPI lock."""
-//|     ...
+//|     def unlock(self, ) -> Any:
+//|         """Releases the SPI lock."""
+//|         ...
 
 STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) {
     busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in);
@@ -223,14 +223,14 @@ STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_unlock_obj, busio_spi_obj_unlock);
 
-//| def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any:
-//|     """Write the data contained in ``buffer``. The SPI object must be locked.
-//|     If the buffer is empty, nothing happens.
+//|     def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any:
+//|         """Write the data contained in ``buffer``. The SPI object must be locked.
+//|         If the buffer is empty, nothing happens.
 //|
-//|     :param bytearray buffer: Write out the data in this buffer
-//|     :param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]``
-//|     :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``"""
-//|     ...
+//|         :param bytearray buffer: Write out the data in this buffer
+//|         :param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]``
+//|         :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``"""
+//|         ...
 
 STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
     enum { ARG_buffer, ARG_start, ARG_end };
@@ -264,16 +264,16 @@ STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_
 MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_obj, 2, busio_spi_write);
 
 
-//| def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any:
-//|     """Read into ``buffer`` while writing ``write_value`` for each byte read.
-//|     The SPI object must be locked.
-//|     If the number of bytes to read is 0, nothing happens.
+//|     def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any:
+//|         """Read into ``buffer`` while writing ``write_value`` for each byte read.
+//|         The SPI object must be locked.
+//|         If the number of bytes to read is 0, nothing happens.
 //|
-//|     :param bytearray buffer: Read data into this buffer
-//|     :param int start: Start of the slice of ``buffer`` to read into: ``buffer[start:end]``
-//|     :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``
-//|     :param int write_value: Value to write while reading. (Usually ignored.)"""
-//|     ...
+//|         :param bytearray buffer: Read data into this buffer
+//|         :param int start: Start of the slice of ``buffer`` to read into: ``buffer[start:end]``
+//|         :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``
+//|         :param int write_value: Value to write while reading. (Usually ignored.)"""
+//|         ...
 
 STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
     enum { ARG_buffer, ARG_start, ARG_end, ARG_write_value };
@@ -307,20 +307,20 @@ STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_m
 }
 MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_readinto_obj, 2, busio_spi_readinto);
 
-//| def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any:
-//|     """Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``.
-//|     The SPI object must be locked.
-//|     The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]``
-//|     must be equal.
-//|     If buffer slice lengths are both 0, nothing happens.
+//|     def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any:
+//|         """Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``.
+//|         The SPI object must be locked.
+//|         The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]``
+//|         must be equal.
+//|         If buffer slice lengths are both 0, nothing happens.
 //|
-//|     :param bytearray buffer_out: Write out the data in this buffer
-//|     :param bytearray buffer_in: Read data into this buffer
-//|     :param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]``
-//|     :param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)``
-//|     :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]``
-//|     :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``"""
-//|     ...
+//|         :param bytearray buffer_out: Write out the data in this buffer
+//|         :param bytearray buffer_in: Read data into this buffer
+//|         :param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]``
+//|         :param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)``
+//|         :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]``
+//|         :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``"""
+//|         ...
 
 STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
     enum { ARG_buffer_out, ARG_buffer_in, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end };
@@ -369,9 +369,9 @@ STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args
 }
 MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_readinto_obj, 2, busio_spi_write_readinto);
 
-//| frequency: Any = ...
-//| """The actual SPI bus frequency. This may not match the frequency requested
-//| due to internal limitations."""
+//|     frequency: Any = ...
+//|     """The actual SPI bus frequency. This may not match the frequency requested
+//|     due to internal limitations."""
 //|
 
 STATIC mp_obj_t busio_spi_obj_get_frequency(mp_obj_t self_in) {
diff --git a/shared-bindings/busio/UART.c b/shared-bindings/busio/UART.c
index e5d123ce7..7c5c6ec2b 100644
--- a/shared-bindings/busio/UART.c
+++ b/shared-bindings/busio/UART.c
@@ -141,9 +141,9 @@ STATIC mp_obj_t busio_uart_make_new(const mp_obj_type_t *type, size_t n_args, co
     return (mp_obj_t)self;
 }
 
-//| def deinit(self, ) -> Any:
-//|     """Deinitialises the UART and releases any hardware resources for reuse."""
-//|     ...
+//|     def deinit(self, ) -> Any:
+//|         """Deinitialises the UART and releases any hardware resources for reuse."""
+//|         ...
 STATIC mp_obj_t busio_uart_obj_deinit(mp_obj_t self_in) {
     busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
     common_hal_busio_uart_deinit(self);
@@ -157,15 +157,15 @@ STATIC void check_for_deinit(busio_uart_obj_t *self) {
     }
 }
 
-//| def __enter__(self, ) -> Any:
-//|     """No-op used by Context Managers."""
-//|     ...
+//|     def __enter__(self, ) -> Any:
+//|         """No-op used by Context Managers."""
+//|         ...
 //  Provided by context manager helper.
 
-//| def __exit__(self, ) -> Any:
-//|     """Automatically deinitializes the hardware when exiting a context. See
-//|     :ref:`lifetime-and-contextmanagers` for more info."""
-//|     ...
+//|     def __exit__(self, ) -> Any:
+//|         """Automatically deinitializes the hardware when exiting a context. See
+//|         :ref:`lifetime-and-contextmanagers` for more info."""
+//|         ...
 STATIC mp_obj_t busio_uart_obj___exit__(size_t n_args, const mp_obj_t *args) {
     (void)n_args;
     common_hal_busio_uart_deinit(args[0]);
@@ -175,40 +175,40 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_
 
 // These are standard stream methods. Code is in py/stream.c.
 //
-//| def read(self, nbytes: Any = None) -> Any:
-//|     """Read characters.  If ``nbytes`` is specified then read at most that many
-//|     bytes. Otherwise, read everything that arrives until the connection
-//|     times out. Providing the number of bytes expected is highly recommended
-//|     because it will be faster.
+//|     def read(self, nbytes: Any = None) -> Any:
+//|         """Read characters.  If ``nbytes`` is specified then read at most that many
+//|         bytes. Otherwise, read everything that arrives until the connection
+//|         times out. Providing the number of bytes expected is highly recommended
+//|         because it will be faster.
 //|
-//|     :return: Data read
-//|     :rtype: bytes or None"""
-//|     ...
+//|         :return: Data read
+//|         :rtype: bytes or None"""
+//|         ...
 
-//| def readinto(self, buf: Any) -> Any:
-//|     """Read bytes into the ``buf``. Read at most ``len(buf)`` bytes.
+//|     def readinto(self, buf: Any) -> Any:
+//|         """Read bytes into the ``buf``. Read at most ``len(buf)`` bytes.
 //|
-//|     :return: number of bytes read and stored into ``buf``
-//|     :rtype: int or None (on a non-blocking error)
+//|         :return: number of bytes read and stored into ``buf``
+//|         :rtype: int or None (on a non-blocking error)
 //|
-//|     *New in CircuitPython 4.0:* No length parameter is permitted."""
-//|     ...
+//|         *New in CircuitPython 4.0:* No length parameter is permitted."""
+//|         ...
 
-//| def readline(self, ) -> Any:
-//|     """Read a line, ending in a newline character.
+//|     def readline(self, ) -> Any:
+//|         """Read a line, ending in a newline character.
 //|
-//|     :return: the line read
-//|     :rtype: int or None"""
-//|     ...
+//|         :return: the line read
+//|         :rtype: int or None"""
+//|         ...
 
-//| def write(self, buf: Any) -> Any:
-//|     """Write the buffer of bytes to the bus.
+//|     def write(self, buf: Any) -> Any:
+//|         """Write the buffer of bytes to the bus.
 //|
-//|     *New in CircuitPython 4.0:* ``buf`` must be bytes, not a string.
+//|       *New in CircuitPython 4.0:* ``buf`` must be bytes, not a string.
 //|
-//|     :return: the number of bytes written
-//|     :rtype: int or None"""
-//|     ...
+//|         :return: the number of bytes written
+//|         :rtype: int or None"""
+//|         ...
 
 // These three methods are used by the shared stream methods.
 STATIC mp_uint_t busio_uart_read(mp_obj_t self_in, void *buf_in, mp_uint_t size, int *errcode) {
@@ -252,8 +252,8 @@ STATIC mp_uint_t busio_uart_ioctl(mp_obj_t self_in, mp_uint_t request, mp_uint_t
     return ret;
 }
 
-//| baudrate: Any = ...
-//| """The current baudrate."""
+//|     baudrate: Any = ...
+//|     """The current baudrate."""
 //|
 STATIC mp_obj_t busio_uart_obj_get_baudrate(mp_obj_t self_in) {
     busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
@@ -278,8 +278,8 @@ const mp_obj_property_t busio_uart_baudrate_obj = {
               (mp_obj_t)&mp_const_none_obj},
 };
 
-//| in_waiting: Any = ...
-//| """The number of bytes in the input buffer, available to be read"""
+//|     in_waiting: Any = ...
+//|     """The number of bytes in the input buffer, available to be read"""
 //|
 STATIC mp_obj_t busio_uart_obj_get_in_waiting(mp_obj_t self_in) {
     busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
@@ -295,8 +295,8 @@ const mp_obj_property_t busio_uart_in_waiting_obj = {
               (mp_obj_t)&mp_const_none_obj},
 };
 
-//| timeout: Any = ...
-//| """The current timeout, in seconds (float)."""
+//|     timeout: Any = ...
+//|     """The current timeout, in seconds (float)."""
 //|
 STATIC mp_obj_t busio_uart_obj_get_timeout(mp_obj_t self_in) {
     busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
@@ -323,8 +323,8 @@ const mp_obj_property_t busio_uart_timeout_obj = {
               (mp_obj_t)&mp_const_none_obj},
 };
 
-//| def reset_input_buffer(self, ) -> Any: ...
-//| """Discard any unread characters in the input buffer."""
+//|     def reset_input_buffer(self, ) -> Any: ...
+//|     """Discard any unread characters in the input buffer."""
 //|
 STATIC mp_obj_t busio_uart_obj_reset_input_buffer(mp_obj_t self_in) {
     busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
@@ -334,7 +334,7 @@ STATIC mp_obj_t busio_uart_obj_reset_input_buffer(mp_obj_t self_in) {
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_reset_input_buffer_obj, busio_uart_obj_reset_input_buffer);
 
-//| class busio:
+//| class Parity:
 //|     """Enum-like class to define the parity used to verify correct data transfer."""
 //|
 //|     def __init__(self, ):