Merge pull request #3123 from kamtom480/sdk2.0

spresense: update SDK to 2.0.1

7 files changed, 1357 insertions, 10 deletions

diff --git a/ports/cxd56/Makefile b/ports/cxd56/Makefile
index 507d76331..3766d4222 100644
--- a/ports/cxd56/Makefile
+++ b/ports/cxd56/Makefile
@@ -62,6 +62,13 @@ SPRESENSE_SDK = spresense-exported-sdk
 
 FIRMWARE = $(SPRESENSE_SDK)/firmware
 
+BOOTLOADER_FILES += \
+	$(FIRMWARE)/AESM.espk \
+	$(FIRMWARE)/dnnrt-mp.espk \
+	$(FIRMWARE)/gnssfw.espk \
+	$(FIRMWARE)/loader.espk \
+	$(FIRMWARE)/sysutil.spk \
+
 # Platforms are: Linux, Darwin, MSYS, CYGWIN
 PLATFORM := $(firstword $(subst _, ,$(shell uname -s 2>/dev/null)))
 
@@ -91,8 +98,7 @@ INC += \
 	-I$(SPRESENSE_SDK)/nuttx/arch \
 	-I$(SPRESENSE_SDK)/nuttx/arch/chip \
 	-I$(SPRESENSE_SDK)/nuttx/arch/os \
-	-I$(SPRESENSE_SDK)/sdk/bsp/include \
-	-I$(SPRESENSE_SDK)/sdk/bsp/include/sdk \
+	-I$(SPRESENSE_SDK)/sdk/include \
 
 CFLAGS += \
 	$(INC) \
@@ -125,7 +131,7 @@ LDFLAGS = \
 	--entry=__start \
 	-nostartfiles \
 	-nodefaultlibs \
-	-T$(SPRESENSE_SDK)/nuttx/build/ramconfig.ld \
+	-T$(SPRESENSE_SDK)/nuttx/scripts/ramconfig.ld \
 	--gc-sections \
 	-Map=$(BUILD)/output.map \
 	-o $(BUILD)/firmware.elf \
@@ -133,8 +139,8 @@ LDFLAGS = \
 	-u spresense_main \
 	-u board_timerhook \
 	$(BUILD)/libmpy.a \
-	$(SPRESENSE_SDK)/sdk/libs/libapps.a \
-	$(SPRESENSE_SDK)/sdk/libs/libsdk.a \
+	$(SPRESENSE_SDK)/nuttx/libs/libapps.a \
+	$(SPRESENSE_SDK)/nuttx/libs/libnuttx.a \
 	$(LIBM) \
 	$(LIBGCC) \
 	--end-group \
@@ -213,11 +219,11 @@ $(BUILD)/firmware.spk: $(BUILD)/firmware.elf $(MKSPK)
 
 flash: $(BUILD)/firmware.spk
 	$(ECHO) "Writing $< to the board"
-	$(SPRESENSE_SDK)/sdk/tools/flash.sh -c $(SERIAL) $(BUILD)/firmware.spk
+	tools/flash_writer.py -s -c $(SERIAL) -d -b 115200 -n $(BUILD)/firmware.spk
 
 flash-bootloader: $(SPRESENSE_SDK) $(FIRMWARE)
 	$(ECHO) "Writing loader to the board"
-	$(SPRESENSE_SDK)/sdk/tools/flash.sh -l $(FIRMWARE) -c $(SERIAL)
+	tools/flash_writer.py -s -c $(SERIAL) -d -b 115200 -n $(BOOTLOADER_FILES)
 
 include $(TOP)/py/mkrules.mk
 
diff --git a/ports/cxd56/README.md b/ports/cxd56/README.md
index ec284e742..7fa439aac 100644
--- a/ports/cxd56/README.md
+++ b/ports/cxd56/README.md
@@ -16,7 +16,7 @@ Board features:
   * Spresense is powered by Sony's CXD5602 microcontroller (ARM® Cortex®-M4F × 6
     cores), with a clock speed of 156 MHz.
 
-Currently, Spresense port does not support GNSS, Audio and Multicore.
+Currently, Spresense port does not support Audio and Multicore.
 
 Refer to [developer.sony.com/develop/spresense/](https://developer.sony.com/develop/spresense/)
 for further information about this board.
@@ -75,7 +75,7 @@ Bootloader information:
 
 * You have to accept the End User License Agreement to be able to download and use the Spresense bootloader binary.
 
-Download the spresense binaries zip archive from: [Spresense firmware v1-4-000](https://developer.sony.com/file/download/download-spresense-firmware-v1-4-000)
+Download the spresense binaries zip archive from: [Spresense firmware v2-0-000](https://developer.sony.com/file/download/download-spresense-firmware-v2-0-000)
 
 Extract spresense binaries in your PC to ports/spresense/spresense-exported-sdk/firmware/
 
diff --git a/ports/cxd56/common-hal/pulseio/PWMOut.h b/ports/cxd56/common-hal/pulseio/PWMOut.h
index 57fc4181f..694acc4e0 100644
--- a/ports/cxd56/common-hal/pulseio/PWMOut.h
+++ b/ports/cxd56/common-hal/pulseio/PWMOut.h
@@ -27,7 +27,7 @@
 #ifndef MICROPY_INCLUDED_CXD56_COMMON_HAL_PULSEIO_PWMOUT_H
 #define MICROPY_INCLUDED_CXD56_COMMON_HAL_PULSEIO_PWMOUT_H
 
-#include <nuttx/drivers/pwm.h>
+#include <nuttx/timers/pwm.h>
 
 #include "common-hal/microcontroller/Pin.h"
 
diff --git a/ports/cxd56/configs/circuitpython/defconfig b/ports/cxd56/configs/circuitpython/defconfig
new file mode 100644
index 000000000..268f7a68e
--- /dev/null
+++ b/ports/cxd56/configs/circuitpython/defconfig
@@ -0,0 +1,171 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_ARCH_LEDS is not set
+# CONFIG_CXD56_I2C0_SCUSEQ is not set
+# CONFIG_CXD56_SFC is not set
+# CONFIG_CXD56_SPI3_SCUSEQ is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
+# CONFIG_MTD_SMART_WEAR_LEVEL is not set
+# CONFIG_NET_IPv4 is not set
+# CONFIG_NXFONTS_PACKEDMSFIRST is not set
+# CONFIG_STANDARD_SERIAL is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="spresense"
+CONFIG_ARCH_BOARD_SPRESENSE=y
+CONFIG_ARCH_CHIP="cxd56xx"
+CONFIG_ARCH_CHIP_CXD56XX=y
+CONFIG_ARCH_INTERRUPTSTACK=2048
+CONFIG_ARCH_MATH_H=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ASMP=y
+CONFIG_AUDIO=y
+CONFIG_AUDIOUTILS_DSP_MOUNTPT="/mnt/sd0/BIN"
+CONFIG_AUDIOUTILS_MANAGER=y
+CONFIG_AUDIOUTILS_PLAYER=y
+CONFIG_AUDIOUTILS_PLAYLIST=y
+CONFIG_AUDIOUTILS_RECORDER=y
+CONFIG_BOARDCTL_IOCTL=y
+CONFIG_BOARDCTL_POWEROFF=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL_UNIQUEID=y
+CONFIG_BOARDCTL_UNIQUEID_SIZE=5
+CONFIG_BOARDCTL_USBDEVCTRL=y
+CONFIG_BOARD_CRASHDUMP=y
+CONFIG_BOARD_LATE_INITIALIZE=y
+CONFIG_BOARD_LOOPSPERMSEC=5434
+CONFIG_BOOT_RUNFROMISRAM=y
+CONFIG_BUILTIN=y
+CONFIG_CLOCK_MONOTONIC=y
+CONFIG_CXD56_ADC=y
+CONFIG_CXD56_AUDIO=y
+CONFIG_CXD56_BINARY=y
+CONFIG_CXD56_CHARGER=y
+CONFIG_CXD56_CISIF=y
+CONFIG_CXD56_GAUGE=y
+CONFIG_CXD56_GNSS=y
+CONFIG_CXD56_HPADC0=y
+CONFIG_CXD56_HPADC1=y
+CONFIG_CXD56_I2C0=y
+CONFIG_CXD56_I2C2=y
+CONFIG_CXD56_I2C=y
+CONFIG_CXD56_I2C_DRIVER=y
+CONFIG_CXD56_IMAGEPROC=y
+CONFIG_CXD56_LPADC=y
+CONFIG_CXD56_PWM0=y
+CONFIG_CXD56_PWM1=y
+CONFIG_CXD56_PWM2=y
+CONFIG_CXD56_PWM3=y
+CONFIG_CXD56_PWM=y
+CONFIG_CXD56_SDIO=y
+CONFIG_CXD56_SPI3=y
+CONFIG_CXD56_SPI5=y
+CONFIG_CXD56_SPI=y
+CONFIG_CXD56_UART2=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DNN_RT=y
+CONFIG_DNN_RT_MP=y
+CONFIG_DRIVERS_VIDEO=y
+CONFIG_EXTERNALS_CMSIS=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=64
+CONFIG_FS_FAT=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_FS_SMARTFS=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_LCD=y
+CONFIG_LCD_NOGETRUN=y
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_IPv4_ADDRCONV=y
+CONFIG_LIBC_IPv6_ADDRCONV=y
+CONFIG_LIB_KBDCODEC=y
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_MEMUTILS=y
+CONFIG_MMCSD=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_MTD=y
+CONFIG_MTD_BYTE_WRITE=y
+CONFIG_MTD_SMART=y
+CONFIG_MTD_SMART_ENABLE_CRC=y
+CONFIG_MTD_SMART_FSCK=y
+CONFIG_MTD_SMART_SECTOR_SIZE=4096
+CONFIG_NAME_MAX=64
+CONFIG_NET=y
+CONFIG_NETDEVICES=y
+CONFIG_NETDEV_LATEINIT=y
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_TCP_NO_STACK=y
+CONFIG_NET_UDP_NO_STACK=y
+CONFIG_NET_USRSOCK=y
+CONFIG_NET_USRSOCK_TCP=y
+CONFIG_NET_USRSOCK_UDP=y
+CONFIG_NFILE_STREAMS=8
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_DISABLE_LOSMART=y
+CONFIG_NSH_LINELEN=160
+CONFIG_NSH_MAXARGUMENTS=14
+CONFIG_NSH_READLINE=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_PREALLOC_WDOGS=16
+CONFIG_PWM=y
+CONFIG_RAM_SIZE=1572864
+CONFIG_RAM_START=0x0d000000
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_CMD_HISTORY_LINELEN=160
+CONFIG_READLINE_TABCOMPLETION=y
+CONFIG_RR_INTERVAL=200
+CONFIG_RTC=y
+CONFIG_RTC_ALARM=y
+CONFIG_RTC_DRIVER=y
+CONFIG_RTC_FREQUENCY=32768
+CONFIG_RTC_HIRES=y
+CONFIG_SCHED_CHILD_STATUS=y
+CONFIG_SCHED_HAVE_PARENT=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_LPNTHREADS=3
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SDIO_MUXBUS=y
+CONFIG_SDK_AUDIO=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SMARTFS_ALIGNED_ACCESS=y
+CONFIG_SMARTFS_MAXNAMLEN=30
+CONFIG_SMARTFS_MULTI_ROOT_DIRS=y
+CONFIG_SPECIFIC_DRIVERS=y
+CONFIG_SPI=y
+CONFIG_SPRESENSE_EXTENSION=y
+CONFIG_START_DAY=6
+CONFIG_START_MONTH=12
+CONFIG_START_YEAR=2011
+CONFIG_SYSTEMTICK_HOOK=y
+CONFIG_SYSTEM_CLE=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_SYSTEM_NSH_CXXINITIALIZE=y
+CONFIG_UART1_RXBUFSIZE=1024
+CONFIG_UART1_SERIAL_CONSOLE=y
+CONFIG_UART1_TXBUFSIZE=1024
+CONFIG_UART2_IFLOWCONTROL=y
+CONFIG_UART2_OFLOWCONTROL=y
+CONFIG_USBDEV=y
+CONFIG_USBDEV_DMA=y
+CONFIG_USBDEV_DUALSPEED=y
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=1064960
+CONFIG_USER_ENTRYPOINT="spresense_main"
+CONFIG_VIDEO_ISX012=y
+CONFIG_VIDEO_STREAM=y
diff --git a/ports/cxd56/spresense-exported-sdk b/ports/cxd56/spresense-exported-sdk
-Subproject 7f6568c7f4898cdb24a2f06040784a836050686
+Subproject c991d439fac9c23cfcac0da16fe8055f818d40a
diff --git a/ports/cxd56/tools/flash_writer.py b/ports/cxd56/tools/flash_writer.py
new file mode 100755
index 000000000..840f10c32
--- /dev/null
+++ b/ports/cxd56/tools/flash_writer.py
@@ -0,0 +1,580 @@
+#! /usr/bin/env python3
+
+# Copyright (C) 2018 Sony Semiconductor Solutions Corp.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+import time
+import sys
+import os
+import struct
+import glob
+import fnmatch
+import errno
+import telnetlib
+import argparse
+import shutil
+import subprocess
+import re
+import xmodem
+
+import_serial_module = True
+
+# When SDK release, plase set SDK_RELEASE as True.
+SDK_RELEASE = False
+
+if SDK_RELEASE :
+	PRINT_RAW_COMMAND = False
+	REBOOT_AT_END = True
+else :
+	PRINT_RAW_COMMAND = True
+	REBOOT_AT_END = True
+
+try:
+	import serial
+except:
+	import_serial_module = False
+
+# supported environment various
+# CXD56_PORT
+# CXD56_TELNETSRV_PORT
+# CXD56_TELNETSRV_IP
+
+PROTOCOL_SERIAL = 0
+PROTOCOL_TELNET = 1
+
+MAX_DOT_COUNT = 70
+
+# configure parameters and default value
+class ConfigArgs:
+	PROTOCOL_TYPE = None
+	SERIAL_PORT = "COM1"
+	SERVER_PORT = 4569
+	SERVER_IP = "localhost"
+	EOL = bytes([10])
+	WAIT_RESET = True
+	AUTO_RESET = False
+	DTR_RESET = False
+	XMODEM_BAUD = 0
+	NO_SET_BOOTABLE = False
+	PACKAGE_NAME = []
+	FILE_NAME = []
+	ERASE_NAME = []
+	PKGSYS_NAME = []
+	PKGAPP_NAME = []
+	PKGUPD_NAME = []
+
+ROM_MSG = [b"Welcome to nash"]
+XMDM_MSG = "Waiting for XMODEM (CRC or 1K) transfer. Ctrl-X to cancel."
+
+class ConfigArgsLoader():
+	def __init__(self):
+		self.parser = argparse.ArgumentParser(formatter_class=argparse.RawTextHelpFormatter)
+		self.parser.add_argument("package_name", help="the name of the package to install", nargs='*')
+		self.parser.add_argument("-f", "--file", dest="file_name", help="save file", action='append')
+		self.parser.add_argument("-e", "--erase", dest="erase_name", help="erase file", action='append')
+
+		self.parser.add_argument("-S", "--sys", dest="pkgsys_name", help="the name of the system package to install", action='append')
+		self.parser.add_argument("-A", "--app", dest="pkgapp_name", help="the name of the application package to install", action='append')
+		self.parser.add_argument("-U", "--upd", dest="pkgupd_name", help="the name of the updater package to install", action='append')
+
+		self.parser.add_argument("-a", "--auto-reset", dest="auto_reset",
+									action="store_true", default=None,
+									help="try to auto reset develop board if possible")
+		self.parser.add_argument("-d", "--dtr-reset", dest="dtr_reset",
+									action="store_true", default=None,
+									help="try to auto reset develop board if possible")
+		self.parser.add_argument("-n", "--no-set-bootable", dest="no_set_bootable",
+									action="store_true", default=None,
+									help="not to set bootable")
+
+		group = self.parser.add_argument_group()
+		group.add_argument("-i", "--server-ip", dest="server_ip",
+						   help="the ip address connected to the telnet server")
+		group.add_argument("-p", "--server-port", dest="server_port", type=int,
+						   help="the port connected to the telnet server")
+
+		group = self.parser.add_argument_group()
+		group.add_argument("-c", "--serial-port", dest="serial_port", help="the serial port")
+		group.add_argument("-b", "--xmodem-baudrate", dest="xmodem_baud", help="Use the faster baudrate in xmodem")
+
+		mutually_group = self.parser.add_mutually_exclusive_group()
+		mutually_group.add_argument("-t", "--telnet-protocol", dest="telnet_protocol",
+									action="store_true", default=None,
+									help="use the telnet protocol for binary transmission")
+		mutually_group.add_argument("-s", "--serial-protocol", dest="serial_protocol",
+									action="store_true", default=None,
+									help="use the serial port for binary transmission, default options")
+
+		mutually_group2 = self.parser.add_mutually_exclusive_group()
+		mutually_group2.add_argument("-F", "--force-wait-reset", dest="wait_reset",
+									action="store_true", default=None,
+									help="force wait for pressing RESET button")
+		mutually_group2.add_argument("-N", "--no-wait-reset", dest="wait_reset",
+									action="store_false", default=None,
+									help="if possible, skip to wait for pressing RESET button")
+
+	def update_config(self):
+		args = self.parser.parse_args()
+
+		ConfigArgs.PACKAGE_NAME = args.package_name
+		ConfigArgs.FILE_NAME = args.file_name
+		ConfigArgs.ERASE_NAME = args.erase_name
+		ConfigArgs.PKGSYS_NAME = args.pkgsys_name
+		ConfigArgs.PKGAPP_NAME = args.pkgapp_name
+		ConfigArgs.PKGUPD_NAME = args.pkgupd_name
+
+		# Get serial port or telnet server ip etc
+		if args.serial_protocol == True:
+			ConfigArgs.PROTOCOL_TYPE = PROTOCOL_SERIAL
+		elif args.telnet_protocol == True:
+			ConfigArgs.PROTOCOL_TYPE = PROTOCOL_TELNET
+
+		if ConfigArgs.PROTOCOL_TYPE == None:
+			proto = os.environ.get("CXD56_PROTOCOL")
+			if proto is not None:
+				if 's' in proto:
+					ConfigArgs.PROTOCOL_TYPE = PROTOCOL_SERIAL
+				elif 't' in proto:
+					ConfigArgs.PROTOCOL_TYPE = PROTOCOL_TELNET
+
+		if ConfigArgs.PROTOCOL_TYPE == None:
+			ConfigArgs.PROTOCOL_TYPE = PROTOCOL_SERIAL
+
+		if ConfigArgs.PROTOCOL_TYPE == PROTOCOL_SERIAL:
+			if args.serial_port is not None:
+				ConfigArgs.SERIAL_PORT = args.serial_port
+			else:
+				# Get serial port from the environment
+				port = os.environ.get("CXD56_PORT")
+				if port is not None:
+					ConfigArgs.SERIAL_PORT = port
+				else:
+					print("CXD56_PORT is not set, Use " + ConfigArgs.SERIAL_PORT + ".")
+		else:
+			ConfigArgs.PROTOCOL_TYPE = PROTOCOL_TELNET
+			if args.server_port is not None:
+				ConfigArgs.SERVER_PORT = args.server_port
+			else:
+				port = os.environ.get("CXD56_TELNETSRV_PORT")
+				if port is not None:
+					ConfigArgs.SERVER_PORT = port
+				else:
+					print("CXD56_TELNETSRV_PORT is not set, Use " + str(ConfigArgs.SERVER_PORT) + ".")
+			if args.server_ip is not None:
+				ConfigArgs.SERVER_IP = args.server_ip
+			else:
+				ip = os.environ.get("CXD56_TELNETSRV_IP")
+				if ip is not None:
+					ConfigArgs.SERVER_IP = ip
+				else:
+					print("CXD56_TELNETSRV_IP is not set, Use " + ConfigArgs.SERVER_IP + ".")
+
+		if args.xmodem_baud is not None:
+			ConfigArgs.XMODEM_BAUD = args.xmodem_baud
+
+		if args.auto_reset is not None:
+			ConfigArgs.AUTO_RESET = args.auto_reset
+
+		if args.dtr_reset is not None:
+			ConfigArgs.DTR_RESET = args.dtr_reset
+
+		if args.no_set_bootable is not None:
+			ConfigArgs.NO_SET_BOOTABLE = args.no_set_bootable
+
+		if args.wait_reset is not None:
+			ConfigArgs.WAIT_RESET = args.wait_reset
+
+class TelnetDev:
+	def __init__(self):
+		srv_ipaddr = ConfigArgs.SERVER_IP
+		srv_port = ConfigArgs.SERVER_PORT
+		self.recvbuf = b'';
+		try:
+			self.telnet = telnetlib.Telnet(host=srv_ipaddr, port=srv_port, timeout=10)
+			# There is a ack to be sent after connecting to the telnet server.
+			self.telnet.write(b"\xff")
+		except Exception as e:
+			print("Cannot connect to the server %s:%d" % (srv_ipaddr, srv_port))
+			sys.exit(e.args[0])
+
+	def readline(self, size=None):
+		res = b''
+		ch = b''
+		while ch != ConfigArgs.EOL:
+			ch = self.getc_raw(1, timeout=0.1)
+			if ch == b'':
+				return res
+			res += ch
+		return res
+
+	def getc_raw(self, size, timeout=1):
+		res = b''
+		tm = time.monotonic()
+		while size > 0:
+			while self.recvbuf == b'':
+				self.recvbuf = self.telnet.read_eager()
+				if self.recvbuf == b'':
+					if (time.monotonic() - tm) > timeout:
+						return res
+					time.sleep(0.1)
+			res += self.recvbuf[0:1]
+			self.recvbuf = self.recvbuf[1:]
+			size -= 1
+		return res
+
+	def write(self, buffer):
+		self.telnet.write(buffer)
+
+	def discard_inputs(self, timeout=1.0):
+		while True:
+			ch = self.getc_raw(1, timeout=timeout)
+			if ch == b'':
+				break
+
+	def getc(self, size, timeout=1):
+		c = self.getc_raw(size, timeout)
+		return c
+
+	def putc(self, buffer, timeout=1):
+		self.telnet.write(buffer)
+		self.show_progress(len(buffer))
+
+	def reboot(self):
+		# no-op
+		pass
+
+	def set_file_size(self, filesize):
+		self.bytes_transfered = 0
+		self.filesize = filesize
+		self.count = 0
+
+	def show_progress(self, sendsize):
+		if PRINT_RAW_COMMAND:
+			if self.count < MAX_DOT_COUNT:
+				self.bytes_transfered = self.bytes_transfered + sendsize
+				cur_count = int(self.bytes_transfered * MAX_DOT_COUNT / self.filesize)
+				if MAX_DOT_COUNT < cur_count:
+					cur_count = MAX_DOT_COUNT
+				for idx in range(cur_count - self.count):
+					print('#',end='')
+					sys.stdout.flush()
+				self.count = cur_count
+				if self.count == MAX_DOT_COUNT:
+					print("\n")
+
+class SerialDev:
+	def __init__(self):
+		if import_serial_module is False:
+			print("Cannot import serial module, maybe it's not install yet.")
+			print("\n", end="")
+			print("Please install python-setuptool by Cygwin installer.")
+			print("After that use easy_intall command to install serial module")
+			print("    $ cd tool/")
+			print("    $ python3 -m easy_install pyserial-2.7.tar.gz")
+			quit()
+		else:
+			port = ConfigArgs.SERIAL_PORT
+			try:
+				self.serial = serial.Serial(port, baudrate=115200,
+					parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE,
+					bytesize=serial.EIGHTBITS, timeout=0.1)
+			except Exception as e:
+				print("Cannot open port : " + port)
+				sys.exit(e.args[0])
+
+	def readline(self, size=None):
+		return self.serial.readline(size)
+
+	def write(self, buffer):
+		self.serial.write(buffer)
+		self.serial.flush()
+
+	def discard_inputs(self, timeout=1.0):
+		time.sleep(timeout)
+		self.serial.flushInput()
+
+	def getc(self, size, timeout=1):
+		self.serial.timeout = timeout
+		c = self.serial.read(size)
+		self.serial.timeout = 0.1
+		return c
+
+	def putc(self, buffer, timeout=1):
+		self.serial.timeout = timeout
+		self.serial.write(buffer)
+		self.serial.flush()
+		self.serial.timeout = 0.1
+		self.show_progress(len(buffer))
+
+	# Note: windows platform dependent code
+	def putc_win(self, buffer, timeout=1):
+		self.serial.write(buffer)
+		self.show_progress(len(buffer))
+		while True:
+			if self.serial.out_waiting == 0:
+				break
+
+	def setBaudrate(self, baudrate):
+#		self.serial.setBaudrate(baudrate)
+		self.serial.baudrate = baudrate
+
+	def reboot(self):
+		# Target Reset by DTR
+		self.serial.setDTR(False)
+		self.serial.setDTR(True)
+		self.serial.setDTR(False)
+
+	def set_file_size(self, filesize):
+		self.bytes_transfered = 0
+		self.filesize = filesize
+		self.count = 0
+
+	def show_progress(self, sendsize):
+		if PRINT_RAW_COMMAND:
+			if self.count < MAX_DOT_COUNT:
+				self.bytes_transfered = self.bytes_transfered + sendsize
+				cur_count = int(self.bytes_transfered * MAX_DOT_COUNT / self.filesize)
+				if MAX_DOT_COUNT < cur_count:
+					cur_count = MAX_DOT_COUNT
+				for idx in range(cur_count - self.count):
+					print('#',end='')
+					sys.stdout.flush()
+				self.count = cur_count
+				if self.count == MAX_DOT_COUNT:
+					print("\n")
+
+class FlashWriter:
+	def __init__(self, protocol_sel=PROTOCOL_SERIAL):
+		if protocol_sel == PROTOCOL_TELNET:
+			self.serial = TelnetDev()
+		else:
+			self.serial = SerialDev()
+
+	def cancel_autoboot(self) :
+		boot_msg = ''
+		self.serial.reboot()  # Target reboot before send 'r'
+		while boot_msg == '' :
+			rx = self.serial.readline().strip()
+			self.serial.write(b"r")  # Send "r" key to avoid auto boot
+			for msg in ROM_MSG :
+				if msg in rx :
+					boot_msg = msg
+					break
+		while True :
+			rx = self.serial.readline().decode(errors="replace").strip()
+			if "updater" in rx :
+				# Workaround : Sometime first character is dropped.
+				# Send line feed as air shot before actual command.
+				self.serial.write(b"\n")    # Send line feed
+				self.serial.discard_inputs()# Clear input buffer to sync
+				return boot_msg.decode(errors="ignore")
+
+	def recv(self):
+		rx = self.serial.readline()
+		if PRINT_RAW_COMMAND :
+			serial_line = rx.decode(errors="replace")
+			if serial_line.strip() != "" and not serial_line.startswith(XMDM_MSG):
+				print(serial_line, end="")
+		return rx
+
+	def wait(self, string):
+		while True:
+			rx = self.recv()
+			if string.encode() in rx:
+				time.sleep(0.1)
+				break
+
+	def wait_for_prompt(self):
+		prompt_pat = re.compile(b"updater")
+		while True:
+			rx = self.recv()
+			if prompt_pat.search(rx):
+				time.sleep(0.1)
+				break
+
+	def send(self, string):
+		self.serial.write(str(string).encode() + b"\n")
+		rx = self.serial.readline()
+		if PRINT_RAW_COMMAND :
+			print(rx.decode(errors="replace"), end="")
+
+	def read_output(self, prompt_text) :
+		output = []
+		while True :
+			rx = self.serial.readline()
+			if prompt_text.encode() in rx :
+				time.sleep(0.1)
+				break
+			if rx != "" :
+				output.append(rx.decode(errors="ignore").rstrip())
+		return output
+
+	def install_files(self, files, command) :
+		if ConfigArgs.XMODEM_BAUD:
+			command += " -b " + ConfigArgs.XMODEM_BAUD
+		if os.name == 'nt':
+			modem = xmodem.XMODEM(self.serial.getc, self.serial.putc_win, 'xmodem1k')
+		else:
+			modem = xmodem.XMODEM(self.serial.getc, self.serial.putc, 'xmodem1k')
+		for file in files:
+			with open(file, "rb") as bin :
+				self.send(command)
+				print("Install " + file)
+				self.wait(XMDM_MSG)
+				print("|0%" +
+						"-" * (int(MAX_DOT_COUNT / 2) - 6) +
+						"50%" +
+						"-" * (MAX_DOT_COUNT - int(MAX_DOT_COUNT / 2) - 5) +
+						"100%|")
+				if ConfigArgs.XMODEM_BAUD:
+					self.serial.setBaudrate(ConfigArgs.XMODEM_BAUD)
+					self.serial.discard_inputs() # Clear input buffer to sync
+				self.serial.set_file_size(os.path.getsize(file))
+				modem.send(bin)
+				if ConfigArgs.XMODEM_BAUD:
+					self.serial.setBaudrate(115200)
+			self.wait_for_prompt()
+
+	def save_files(self, files) :
+		if ConfigArgs.XMODEM_BAUD:
+			command = "save_file -b " + ConfigArgs.XMODEM_BAUD + " -x "
+		else:
+			command = "save_file -x "
+		if os.name == 'nt':
+			modem = xmodem.XMODEM(self.serial.getc, self.serial.putc_win, 'xmodem1k')
+		else:
+			modem = xmodem.XMODEM(self.serial.getc, self.serial.putc, 'xmodem1k')
+		for file in files:
+			with open(file, "rb") as bin :
+				self.send(command + os.path.basename(file))
+				print("Save " + file)
+				self.wait(XMDM_MSG)
+				if ConfigArgs.XMODEM_BAUD:
+					self.serial.setBaudrate(ConfigArgs.XMODEM_BAUD)
+					self.serial.discard_inputs() # Clear input buffer to sync
+				self.serial.set_file_size(os.path.getsize(file))
+				modem.send(bin)
+				if ConfigArgs.XMODEM_BAUD:
+					self.serial.setBaudrate(115200)
+				self.wait_for_prompt()
+				self.send("chmod d+rw " + os.path.basename(file))
+				self.wait_for_prompt()
+
+	def delete_files(self, files) :
+		for file in files :
+			self.delete_binary(file)
+
+	def delete_binary(self, bin_name) :
+		self.send("rm " + bin_name)
+		self.wait_for_prompt()
+
+def main():
+	try:
+		config_loader = ConfigArgsLoader()
+		config_loader.update_config()
+	except:
+		return errno.EINVAL
+
+	# Wait to reset the board
+	writer = FlashWriter(ConfigArgs.PROTOCOL_TYPE)
+
+	do_wait_reset = True
+	if ConfigArgs.AUTO_RESET:
+		if subprocess.call("cd " + sys.path[0] + "; ./reset_board.sh", shell=True) == 0:
+			print("auto reset board sucess!!")
+			do_wait_reset = False
+			bootrom_msg = writer.cancel_autoboot()
+
+	if ConfigArgs.DTR_RESET:
+		do_wait_reset = False
+		bootrom_msg = writer.cancel_autoboot()
+
+	if ConfigArgs.WAIT_RESET == False and do_wait_reset == True:
+		rx = writer.recv()
+		time.sleep(1)
+		for i in range(3):
+			writer.send("")
+			rx = writer.recv()
+			if "updater".encode() in rx:
+				# No need to wait for reset
+				do_wait_reset = False
+				break
+			time.sleep(1)
+
+	if do_wait_reset:
+		# Wait to reset the board
+		print('Please press RESET button on target board')
+		sys.stdout.flush()
+		bootrom_msg = writer.cancel_autoboot()
+
+	# Remove files
+	if ConfigArgs.ERASE_NAME :
+		print(">>> Remove exisiting files ...")
+		writer.delete_files(ConfigArgs.ERASE_NAME)
+
+	# Install files
+	if ConfigArgs.PACKAGE_NAME or ConfigArgs.PKGSYS_NAME or ConfigArgs.PKGAPP_NAME or ConfigArgs.PKGUPD_NAME:
+		print(">>> Install files ...")
+	if ConfigArgs.PACKAGE_NAME :
+		writer.install_files(ConfigArgs.PACKAGE_NAME, "install")
+	if ConfigArgs.PKGSYS_NAME :
+		writer.install_files(ConfigArgs.PKGSYS_NAME, "install")
+	if ConfigArgs.PKGAPP_NAME :
+		writer.install_files(ConfigArgs.PKGAPP_NAME, "install")
+	if ConfigArgs.PKGUPD_NAME :
+		writer.install_files(ConfigArgs.PKGUPD_NAME, "install -k updater.key")
+
+	# Save files
+	if ConfigArgs.FILE_NAME :
+		print(">>> Save files ...")
+		writer.save_files(ConfigArgs.FILE_NAME)
+
+	# Set auto boot
+	if not ConfigArgs.NO_SET_BOOTABLE:
+		print(">>> Save Configuration to FlashROM ...")
+		writer.send("set bootable M0P")
+		writer.wait_for_prompt()
+
+	# Sync all cached data to flash
+	writer.send("sync")
+	writer.wait_for_prompt()
+
+	if REBOOT_AT_END :
+		print("Restarting the board ...")
+		writer.send("reboot")
+
+	return 0
+
+if __name__ == "__main__":
+	try:
+		sys.exit(main())
+	except KeyboardInterrupt:
+		print("Canceled by keyboard interrupt.")
+		pass
diff --git a/ports/cxd56/tools/xmodem.py b/ports/cxd56/tools/xmodem.py
new file mode 100644
index 000000000..c93430056
--- /dev/null
+++ b/ports/cxd56/tools/xmodem.py
@@ -0,0 +1,590 @@
+'''
+===============================
+ XMODEM file transfer protocol
+===============================
+
+.. $Id$
+
+This is a literal implementation of XMODEM.TXT_, XMODEM1K.TXT_ and
+XMODMCRC.TXT_, support for YMODEM and ZMODEM is pending. YMODEM should
+be fairly easy to implement as it is a hack on top of the XMODEM
+protocol using sequence bytes ``0x00`` for sending file names (and some
+meta data).
+
+.. _XMODEM.TXT: doc/XMODEM.TXT
+.. _XMODEM1K.TXT: doc/XMODEM1K.TXT
+.. _XMODMCRC.TXT: doc/XMODMCRC.TXT
+
+Data flow example including error recovery
+==========================================
+
+Here is a sample of the data flow, sending a 3-block message.
+It includes the two most common line hits - a garbaged block,
+and an ``ACK`` reply getting garbaged. ``CRC`` or ``CSUM`` represents
+the checksum bytes.
+
+XMODEM 128 byte blocks
+----------------------
+
+::
+
+    SENDER                                      RECEIVER
+
+                                            <-- NAK
+    SOH 01 FE Data[128] CSUM                -->
+                                            <-- ACK
+    SOH 02 FD Data[128] CSUM                -->
+                                            <-- ACK
+    SOH 03 FC Data[128] CSUM                -->
+                                            <-- ACK
+    SOH 04 FB Data[128] CSUM                -->
+                                            <-- ACK
+    SOH 05 FA Data[100] CPMEOF[28] CSUM     -->
+                                            <-- ACK
+    EOT                                     -->
+                                            <-- ACK
+
+XMODEM-1k blocks, CRC mode
+--------------------------
+
+::
+
+    SENDER                                      RECEIVER
+
+                                            <-- C
+    STX 01 FE Data[1024] CRC CRC            -->
+                                            <-- ACK
+    STX 02 FD Data[1024] CRC CRC            -->
+                                            <-- ACK
+    STX 03 FC Data[1000] CPMEOF[24] CRC CRC -->
+                                            <-- ACK
+    EOT                                     -->
+                                            <-- ACK
+
+Mixed 1024 and 128 byte Blocks
+------------------------------
+
+::
+
+    SENDER                                      RECEIVER
+
+                                            <-- C
+    STX 01 FE Data[1024] CRC CRC            -->
+                                            <-- ACK
+    STX 02 FD Data[1024] CRC CRC            -->
+                                            <-- ACK
+    SOH 03 FC Data[128] CRC CRC             -->
+                                            <-- ACK
+    SOH 04 FB Data[100] CPMEOF[28] CRC CRC  -->
+                                            <-- ACK
+    EOT                                     -->
+                                            <-- ACK
+
+YMODEM Batch Transmission Session (1 file)
+------------------------------------------
+
+::
+
+    SENDER                                      RECEIVER
+                                            <-- C (command:rb)
+    SOH 00 FF foo.c NUL[123] CRC CRC        -->
+                                            <-- ACK
+                                            <-- C
+    SOH 01 FE Data[128] CRC CRC             -->
+                                            <-- ACK
+    SOH 02 FC Data[128] CRC CRC             -->
+                                            <-- ACK
+    SOH 03 FB Data[100] CPMEOF[28] CRC CRC  -->
+                                            <-- ACK
+    EOT                                     -->
+                                            <-- NAK
+    EOT                                     -->
+                                            <-- ACK
+                                            <-- C
+    SOH 00 FF NUL[128] CRC CRC              -->
+                                            <-- ACK
+
+
+'''
+
+__author__ = 'Wijnand Modderman <maze@pyth0n.org>'
+__copyright__ = ['Copyright (c) 2010 Wijnand Modderman',
+                 'Copyright (c) 1981 Chuck Forsberg']
+__license__ = 'MIT'
+__version__ = '0.3.2'
+
+import logging
+import time
+import sys
+from functools import partial
+import collections
+
+# Loggerr
+log = logging.getLogger('xmodem')
+
+# Protocol bytes
+SOH = bytes([0x01])
+STX = bytes([0x02])
+EOT = bytes([0x04])
+ACK = bytes([0x06])
+DLE = bytes([0x10])
+NAK = bytes([0x15])
+CAN = bytes([0x18])
+CRC = bytes([0x43]) # C
+
+
+class XMODEM(object):
+    '''
+    XMODEM Protocol handler, expects an object to read from and an object to
+    write to.
+
+    >>> def getc(size, timeout=1):
+    ...     return data or None
+    ...
+    >>> def putc(data, timeout=1):
+    ...     return size or None
+    ...
+    >>> modem = XMODEM(getc, putc)
+
+
+    :param getc: Function to retreive bytes from a stream
+    :type getc: callable
+    :param putc: Function to transmit bytes to a stream
+    :type putc: callable
+    :param mode: XMODEM protocol mode
+    :type mode: string
+    :param pad: Padding character to make the packets match the packet size
+    :type pad: char
+
+    '''
+
+    # crctab calculated by Mark G. Mendel, Network Systems Corporation
+    crctable = [
+        0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
+        0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
+        0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
+        0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
+        0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
+        0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
+        0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
+        0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
+        0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
+        0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
+        0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
+        0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
+        0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
+        0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
+        0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
+        0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
+        0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
+        0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
+        0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
+        0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
+        0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
+        0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
+        0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
+        0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
+        0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
+        0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
+        0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
+        0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
+        0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
+        0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
+        0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
+        0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0,
+    ]
+
+    def __init__(self, getc, putc, mode='xmodem', pad=b'\x1a'):
+        self.getc = getc
+        self.putc = putc
+        self.mode = mode
+        self.pad = pad
+
+    def abort(self, count=2, timeout=60):
+        '''
+        Send an abort sequence using CAN bytes.
+        '''
+        for counter in range(0, count):
+            self.putc(CAN, timeout)
+
+    def send(self, stream, retry=32, timeout=360, quiet=0, callback=None):
+        '''
+        Send a stream via the XMODEM protocol.
+
+            >>> stream = file('/etc/issue', 'rb')
+            >>> print modem.send(stream)
+            True
+
+        Returns ``True`` upon succesful transmission or ``False`` in case of
+        failure.
+
+        :param stream: The stream object to send data from.
+        :type stream: stream (file, etc.)
+        :param retry: The maximum number of times to try to resend a failed
+                      packet before failing.
+        :type retry: int
+        :param timeout: The number of seconds to wait for a response before
+                        timing out.
+        :type timeout: int
+        :param quiet: If 0, it prints info to stderr.  If 1, it does not print any info.
+        :type quiet: int
+        :param callback: Reference to a callback function that has the
+                         following signature.  This is useful for
+                         getting status updates while a xmodem
+                         transfer is underway.
+                         Expected callback signature:
+                         def callback(total_packets, success_count, error_count)
+        :type callback: callable
+        '''
+
+        # initialize protocol
+        try:
+            packet_size = dict(
+                xmodem    = 128,
+                xmodem1k  = 1024,
+            )[self.mode]
+        except AttributeError:
+            raise ValueError("An invalid mode was supplied")
+
+        error_count = 0
+        crc_mode = 0
+        cancel = 0
+        while True:
+            char = self.getc(1)
+            if char:
+                if char == NAK:
+                    crc_mode = 0
+                    break
+                elif char == CRC:
+                    crc_mode = 1
+                    break
+                elif char == CAN:
+                    if not quiet:
+                        print('received CAN', file=sys.stderr)
+                    if cancel:
+                        return False
+                    else:
+                        cancel = 1
+                else:
+                    log.error('send ERROR expected NAK/CRC, got %s' % \
+                        (ord(char),))
+
+            error_count += 1
+            if error_count >= retry:
+                self.abort(timeout=timeout)
+                return False
+
+        # send data
+        error_count = 0
+        success_count = 0
+        total_packets = 0
+        sequence = 1
+        while True:
+            data = stream.read(packet_size)
+            if not data:
+                log.info('sending EOT')
+                # end of stream
+                break
+            total_packets += 1
+            data = data.ljust(packet_size, self.pad)
+            if crc_mode:
+                crc = self.calc_crc(data)
+            else:
+                crc = self.calc_checksum(data)
+
+            # emit packet
+            while True:
+                if packet_size == 128:
+                    self.putc(SOH)
+                else:  # packet_size == 1024
+                    self.putc(STX)
+                self.putc(bytes([sequence]))
+                self.putc(bytes([0xff - sequence]))
+                self.putc(data)
+                if crc_mode:
+                    self.putc(bytes([crc >> 8]))
+                    self.putc(bytes([crc & 0xff]))
+                else:
+                    self.putc(bytes([crc]))
+
+                char = self.getc(1, timeout)
+                if char == ACK:
+                    success_count += 1
+                    if isinstance(callback, collections.Callable):
+                        callback(total_packets, success_count, error_count)
+                    break
+                if char == NAK:
+                    error_count += 1
+                    if isinstance(callback, collections.Callable):
+                        callback(total_packets, success_count, error_count)
+                    if error_count >= retry:
+                        # excessive amounts of retransmissions requested,
+                        # abort transfer
+                        self.abort(timeout=timeout)
+                        log.warning('excessive NAKs, transfer aborted')
+                        return False
+
+                    # return to loop and resend
+                    continue
+                else:
+                    log.error('Not ACK, Not NAK')
+                    error_count += 1
+                    if isinstance(callback, collections.Callable):
+                        callback(total_packets, success_count, error_count)
+                    if error_count >= retry:
+                        # excessive amounts of retransmissions requested,
+                        # abort transfer
+                        self.abort(timeout=timeout)
+                        log.warning('excessive protocol errors, transfer aborted')
+                        return False
+
+                    # return to loop and resend
+                    continue
+
+                # protocol error
+                self.abort(timeout=timeout)
+                log.error('protocol error')
+                return False
+
+            # keep track of sequence
+            sequence = (sequence + 1) % 0x100
+
+        while True:
+            # end of transmission
+            self.putc(EOT)
+
+            #An ACK should be returned
+            char = self.getc(1, timeout)
+            if char == ACK:
+                break
+            else:
+                error_count += 1
+                if error_count >= retry:
+                    self.abort(timeout=timeout)
+                    log.warning('EOT was not ACKd, transfer aborted')
+                    return False
+
+        return True
+
+    def recv(self, stream, crc_mode=1, retry=16, timeout=60, delay=1, quiet=0):
+        '''
+        Receive a stream via the XMODEM protocol.
+
+            >>> stream = file('/etc/issue', 'wb')
+            >>> print modem.recv(stream)
+            2342
+
+        Returns the number of bytes received on success or ``None`` in case of
+        failure.
+        '''
+
+        # initiate protocol
+        error_count = 0
+        char = 0
+        cancel = 0
+        while True:
+            # first try CRC mode, if this fails,
+            # fall back to checksum mode
+            if error_count >= retry:
+                self.abort(timeout=timeout)
+                return None
+            elif crc_mode and error_count < (retry / 2):
+                if not self.putc(CRC):
+                    time.sleep(delay)
+                    error_count += 1
+            else:
+                crc_mode = 0
+                if not self.putc(NAK):
+                    time.sleep(delay)
+                    error_count += 1
+
+            char = self.getc(1, timeout)
+            if not char:
+                error_count += 1
+                continue
+            elif char == SOH:
+                #crc_mode = 0
+                break
+            elif char == STX:
+                break
+            elif char == CAN:
+                if cancel:
+                    return None
+                else:
+                    cancel = 1
+            else:
+                error_count += 1
+
+        # read data
+        error_count = 0
+        income_size = 0
+        packet_size = 128
+        sequence = 1
+        cancel = 0
+        while True:
+            while True:
+                if char == SOH:
+                    packet_size = 128
+                    break
+                elif char == STX:
+                    packet_size = 1024
+                    break
+                elif char == EOT:
+                    # We received an EOT, so send an ACK and return the received
+                    # data length
+                    self.putc(ACK)
+                    return income_size
+                elif char == CAN:
+                    # cancel at two consecutive cancels
+                    if cancel:
+                        return None
+                    else:
+                        cancel = 1
+                else:
+                    if not quiet:
+                        print('recv ERROR expected SOH/EOT, got', ord(char), file=sys.stderr)
+                    error_count += 1
+                    if error_count >= retry:
+                        self.abort()
+                        return None
+            # read sequence
+            error_count = 0
+            cancel = 0
+            seq1 = ord(self.getc(1))
+            seq2 = 0xff - ord(self.getc(1))
+            if seq1 == sequence and seq2 == sequence:
+                # sequence is ok, read packet
+                # packet_size + checksum
+                data = self.getc(packet_size + 1 + crc_mode, timeout)
+                if crc_mode:
+                    csum = (ord(data[-2]) << 8) + ord(data[-1])
+                    data = data[:-2]
+                    log.debug('CRC (%04x <> %04x)' % \
+                        (csum, self.calc_crc(data)))
+                    valid = csum == self.calc_crc(data)
+                else:
+                    csum = data[-1]
+                    data = data[:-1]
+                    log.debug('checksum (checksum(%02x <> %02x)' % \
+                        (ord(csum), self.calc_checksum(data)))
+                    valid = ord(csum) == self.calc_checksum(data)
+
+                # valid data, append chunk
+                if valid:
+                    income_size += len(data)
+                    stream.write(data)
+                    self.putc(ACK)
+                    sequence = (sequence + 1) % 0x100
+                    char = self.getc(1, timeout)
+                    continue
+            else:
+                # consume data
+                self.getc(packet_size + 1 + crc_mode)
+                self.debug('expecting sequence %d, got %d/%d' % \
+                    (sequence, seq1, seq2))
+
+            # something went wrong, request retransmission
+            self.putc(NAK)
+
+    def calc_checksum(self, data, checksum=0):
+        '''
+        Calculate the checksum for a given block of data, can also be used to
+        update a checksum.
+
+            >>> csum = modem.calc_checksum('hello')
+            >>> csum = modem.calc_checksum('world', csum)
+            >>> hex(csum)
+            '0x3c'
+
+        '''
+        return (sum(map(ord, data)) + checksum) % 256
+
+    def calc_crc(self, data, crc=0):
+        '''
+        Calculate the Cyclic Redundancy Check for a given block of data, can
+        also be used to update a CRC.
+
+            >>> crc = modem.calc_crc('hello')
+            >>> crc = modem.calc_crc('world', crc)
+            >>> hex(crc)
+            '0xd5e3'
+
+        '''
+        for char in data:
+            crc = (crc << 8) ^ self.crctable[((crc >> 8) ^ int(char)) & 0xff]
+        return crc & 0xffff
+
+
+XMODEM1k  = partial(XMODEM, mode='xmodem1k')
+
+
+def run():
+    import optparse
+    import subprocess
+
+    parser = optparse.OptionParser(usage='%prog [<options>] <send|recv> filename filename')
+    parser.add_option('-m', '--mode', default='xmodem',
+        help='XMODEM mode (xmodem, xmodem1k)')
+
+    options, args = parser.parse_args()
+    if len(args) != 3:
+        parser.error('invalid arguments')
+        return 1
+
+    elif args[0] not in ('send', 'recv'):
+        parser.error('invalid mode')
+        return 1
+
+    def _func(so, si):
+        import select
+        import subprocess
+
+        print('si', si)
+        print('so', so)
+
+        def getc(size, timeout=3):
+            w,t,f = select.select([so], [], [], timeout)
+            if w:
+                data = so.read(size)
+            else:
+                data = None
+
+            print('getc(', repr(data), ')')
+            return data
+
+        def putc(data, timeout=3):
+            w,t,f = select.select([], [si], [], timeout)
+            if t:
+                si.write(data)
+                si.flush()
+                size = len(data)
+            else:
+                size = None
+
+            print('putc(', repr(data), repr(size), ')')
+            return size
+
+        return getc, putc
+
+    def _pipe(*command):
+        pipe = subprocess.Popen(command,
+            stdout=subprocess.PIPE, stdin=subprocess.PIPE)
+        return pipe.stdout, pipe.stdin
+
+    if args[0] == 'recv':
+        import io
+        getc, putc = _func(*_pipe('sz', '--xmodem', args[2]))
+        stream = open(args[1], 'wb')
+        xmodem = XMODEM(getc, putc, mode=options.mode)
+        status = xmodem.recv(stream, retry=8)
+        stream.close()
+
+    elif args[0] == 'send':
+        getc, putc = _func(*_pipe('rz', '--xmodem', args[2]))
+        stream = open(args[1], 'rb')
+        xmodem = XMODEM(getc, putc, mode=options.mode)
+        status = xmodem.send(stream, retry=8)
+        stream.close()
+
+if __name__ == '__main__':
+    sys.exit(run())