Fix serial console output & add more boards

7 files changed, 18 insertions, 6 deletions

diff --git a/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h b/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
index ed3f23a3c..2af3515f4 100644
--- a/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+++ b/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -29,4 +29,8 @@
 #define MICROPY_HW_BOARD_NAME       "BastWiFi"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
+#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
+
+#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n"
+
 #define AUTORESET_DELAY_MS 500
diff --git a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
index 84d15ffc2..a4c8e6576 100644
--- a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+++ b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@@ -31,4 +31,8 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
 
+#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
+
+#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n"
+
 #define AUTORESET_DELAY_MS 500
diff --git a/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h b/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
index 6d603ba57..335aaeb5e 100644
--- a/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+++ b/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -33,6 +33,6 @@
 
 #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
 
-#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up."
+#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n"
 
 #define AUTORESET_DELAY_MS 500
diff --git a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
index f5b6c7948..d3ef8bb26 100644
--- a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+++ b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
@@ -33,6 +33,6 @@
 
 #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
 
-#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up."
+#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n"
 
 #define AUTORESET_DELAY_MS 500
diff --git a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
index d844f37d0..1a1ef7a6c 100644
--- a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+++ b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
@@ -34,6 +34,6 @@
 
 #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
 
-#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up."
+#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n"
 
 #define AUTORESET_DELAY_MS 500
diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
index 93fb0c573..a65d00206 100644
--- a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
@@ -29,6 +29,10 @@
 #define MICROPY_HW_BOARD_NAME       "FeatherS2"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
+#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
+
+#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n"
+
 #define AUTORESET_DELAY_MS 500
 
 // Doesn't work with this on.
diff --git a/supervisor/shared/safe_mode.c b/supervisor/shared/safe_mode.c
index cbbdfe427..f4f23378a 100644
--- a/supervisor/shared/safe_mode.c
+++ b/supervisor/shared/safe_mode.c
@@ -72,7 +72,7 @@ safe_mode_t wait_for_safe_mode_reset(void) {
         // Blink on for 100, off for 100, on for 100, off for 100 and on for 200
         common_hal_digitalio_digitalinout_set_value(&status_led, diff > 100 && diff / 100 != 2 && diff / 100 != 4);
         #endif
-	#ifdef CIRCUITPY_BOOT_BUTTON
+	    #ifdef CIRCUITPY_BOOT_BUTTON
         if (!common_hal_digitalio_digitalinout_get_value(&boot_button)) {
            return USER_SAFE_MODE;
         }
@@ -120,11 +120,11 @@ void print_safe_mode_message(safe_mode_t reason) {
                 // Output a user safe mode string if it's set.
                 serial_write_compressed(translate("You requested starting safe mode by "));
                 serial_write_compressed(translate(BOARD_USER_SAFE_MODE_ACTION));
-                serial_write_compressed(translate("\nTo exit, please reset the board without "));
+                serial_write_compressed(translate("To exit, please reset the board without "));
                 serial_write_compressed(translate(BOARD_USER_SAFE_MODE_ACTION));
-                serial_write("\n");
             #else
                 // fallthrough
+                serial_write_compressed(translate("CircuitPython is in safe mode with status being USER_SAFE_MODE but no specific reason was provided.\n"));
             #endif
             return;
         case MANUAL_SAFE_MODE: