make translate and msgmerge

16 files changed, 555 insertions, 544 deletions

diff --git a/locale/ID.po b/locale/ID.po
index c40ac105c..ae057fbd7 100644
--- a/locale/ID.po
+++ b/locale/ID.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -293,6 +293,7 @@ msgstr "Semua channel event yang disinkronisasi sedang digunakan"
 msgid "All timers for this pin are in use"
 msgstr "Semua timer untuk pin ini sedang digunakan"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -300,7 +301,7 @@ msgstr "Semua timer untuk pin ini sedang digunakan"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "Semua timer sedang digunakan"
 
@@ -582,6 +583,10 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Tidak dapat menginisialisasi UART"
@@ -828,10 +833,6 @@ msgstr "operasi I/O pada file tertutup"
 msgid "I2C Init Error"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr "operasi I2C tidak didukung"
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -973,7 +974,7 @@ msgstr "Pin untuk channel kanan tidak valid"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1441,6 +1442,10 @@ msgstr ""
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr ""
@@ -1627,6 +1632,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate tidak didukung"
 
@@ -1743,11 +1749,11 @@ msgstr "abort() dipanggil"
 msgid "address %08x is not aligned to %d bytes"
 msgstr "alamat %08x tidak selaras dengan %d bytes"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -1828,10 +1834,6 @@ msgstr ""
 msgid "bits must be 7, 8 or 9"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "bits harus memilki nilai 8"
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr ""
@@ -1858,10 +1860,6 @@ msgstr ""
 msgid "buffer too small"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "buffers harus mempunyai panjang yang sama"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr ""
@@ -1937,7 +1935,7 @@ msgstr ""
 msgid "can't convert NaN to int"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr ""
 
@@ -2291,10 +2289,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr "bit pertama(firstbit) harus berupa MSB"
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2479,14 +2473,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "perangkat I2C tidak valid"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "perangkat SPI tidak valid"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "argumen-argumen tidak valid"
@@ -2663,10 +2649,6 @@ msgstr ""
 msgid "must raise an object"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr "harus menentukan semua pin sck/mosi/miso"
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr ""
@@ -3455,6 +3437,9 @@ msgstr ""
 #~ msgid "GPIO16 does not support pull up."
 #~ msgstr "GPIO16 tidak mendukung pull up"
 
+#~ msgid "I2C operation not supported"
+#~ msgstr "operasi I2C tidak didukung"
+
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Bit clock pada pin tidak valid"
 
@@ -3546,9 +3531,15 @@ msgstr ""
 #~ msgid "[addrinfo error %d]"
 #~ msgstr "[addrinfo error %d]"
 
+#~ msgid "bits must be 8"
+#~ msgstr "bits harus memilki nilai 8"
+
 #~ msgid "buffer too long"
 #~ msgstr "buffer terlalu panjang"
 
+#~ msgid "buffers must be the same length"
+#~ msgstr "buffers harus mempunyai panjang yang sama"
+
 #~ msgid "can query only one param"
 #~ msgstr "hanya bisa melakukan query satu param"
 
@@ -3573,6 +3564,9 @@ msgstr ""
 #~ msgid "ffi_prep_closure_loc"
 #~ msgstr "ffi_prep_closure_loc"
 
+#~ msgid "firstbit must be MSB"
+#~ msgstr "bit pertama(firstbit) harus berupa MSB"
+
 #~ msgid "flash location must be below 1MByte"
 #~ msgstr "alokasi flash harus dibawah 1MByte"
 
@@ -3582,6 +3576,12 @@ msgstr ""
 #~ msgid "impossible baudrate"
 #~ msgstr "baudrate tidak memungkinkan"
 
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "perangkat I2C tidak valid"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "perangkat SPI tidak valid"
+
 #~ msgid "invalid alarm"
 #~ msgstr "alarm tidak valid"
 
@@ -3603,6 +3603,9 @@ msgstr ""
 #~ msgid "memory allocation failed, allocating %u bytes for native code"
 #~ msgstr "alokasi memori gagal, mengalokasikan %u byte untuk kode native"
 
+#~ msgid "must specify all of sck/mosi/miso"
+#~ msgstr "harus menentukan semua pin sck/mosi/miso"
+
 #, fuzzy
 #~ msgid "name must be a string"
 #~ msgstr "keyword harus berupa string"
diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index f125c2cc4..1582b746c 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-24 11:10+0200\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -291,6 +291,7 @@ msgstr ""
 msgid "All timers for this pin are in use"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -298,7 +299,7 @@ msgstr ""
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr ""
 
@@ -821,10 +822,6 @@ msgstr ""
 msgid "I2C Init Error"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr ""
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -966,7 +963,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1729,11 +1726,11 @@ msgstr ""
 msgid "address %08x is not aligned to %d bytes"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -1814,10 +1811,6 @@ msgstr ""
 msgid "bits must be 7, 8 or 9"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr ""
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr ""
@@ -1843,10 +1836,6 @@ msgstr ""
 msgid "buffer too small"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr ""
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr ""
@@ -1922,7 +1911,7 @@ msgstr ""
 msgid "can't convert NaN to int"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr ""
 
@@ -2276,10 +2265,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr ""
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2464,14 +2449,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr ""
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr ""
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr ""
@@ -2648,10 +2625,6 @@ msgstr ""
 msgid "must raise an object"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr ""
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr ""
diff --git a/locale/cs.po b/locale/cs.po
index 39bf51af8..b23144fc8 100644
--- a/locale/cs.po
+++ b/locale/cs.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2020-05-24 03:22+0000\n"
 "Last-Translator: dronecz <mzuzelka@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -299,6 +299,7 @@ msgstr ""
 msgid "All timers for this pin are in use"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -306,7 +307,7 @@ msgstr ""
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr ""
 
@@ -580,6 +581,10 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
@@ -825,10 +830,6 @@ msgstr ""
 msgid "I2C Init Error"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr ""
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -970,7 +971,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1433,6 +1434,10 @@ msgstr ""
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr ""
@@ -1619,6 +1624,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -1728,11 +1734,11 @@ msgstr ""
 msgid "address %08x is not aligned to %d bytes"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -1813,10 +1819,6 @@ msgstr ""
 msgid "bits must be 7, 8 or 9"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr ""
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr ""
@@ -1842,10 +1844,6 @@ msgstr ""
 msgid "buffer too small"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr ""
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr ""
@@ -1921,7 +1919,7 @@ msgstr ""
 msgid "can't convert NaN to int"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr ""
 
@@ -2275,10 +2273,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr ""
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2463,14 +2457,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr ""
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr ""
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr ""
@@ -2647,10 +2633,6 @@ msgstr ""
 msgid "must raise an object"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr ""
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr ""
diff --git a/locale/de_DE.po b/locale/de_DE.po
index d317a6234..eff611b20 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2020-06-16 18:24+0000\n"
 "Last-Translator: Andreas Buchen <andreas.buchen@gmail.com>\n"
 "Language: de_DE\n"
@@ -298,6 +298,7 @@ msgstr "Alle sync event Kanäle werden benutzt"
 msgid "All timers for this pin are in use"
 msgstr "Alle timer für diesen Pin werden bereits benutzt"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -305,7 +306,7 @@ msgstr "Alle timer für diesen Pin werden bereits benutzt"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "Alle timer werden benutzt"
 
@@ -590,6 +591,10 @@ msgstr "Beschädigte .mpy Datei"
 msgid "Corrupt raw code"
 msgstr "Beschädigter raw code"
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Konnte UART nicht initialisieren"
@@ -840,10 +845,6 @@ msgstr "Lese/Schreibe-operation an geschlossener Datei"
 msgid "I2C Init Error"
 msgstr "I2C-Init-Fehler"
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr "I2C-operation nicht unterstützt"
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -987,7 +988,7 @@ msgstr "Ungültiger Pin für rechten Kanal"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1463,6 +1464,10 @@ msgstr "Stream fehlt readinto() oder write() Methode."
 msgid "Supply at least one UART pin"
 msgstr "Geben Sie mindestens einen UART-Pin an"
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr "Zeitüberschreitung beim Auslesen der Temperatur"
@@ -1667,6 +1672,7 @@ msgstr ""
 "Eingabeaufforderung auf dem anderen Gerät abgelehnt oder ignoriert."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate wird nicht unterstützt"
 
@@ -1785,11 +1791,11 @@ msgstr "abort() wurde aufgerufen"
 msgid "address %08x is not aligned to %d bytes"
 msgstr "Addresse %08x ist nicht an %d bytes ausgerichtet"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "Adresse außerhalb der Grenzen"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr "adresses ist leer"
 
@@ -1870,10 +1876,6 @@ msgstr "Der binäre Operator %q ist nicht implementiert"
 msgid "bits must be 7, 8 or 9"
 msgstr "bits muss 7, 8 oder 9 sein"
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "bits müssen 8 sein"
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr "Es müssen 8 oder 16 bits_per_sample sein"
@@ -1899,10 +1901,6 @@ msgstr "Puffersegmente müssen gleich lang sein"
 msgid "buffer too small"
 msgstr "Der Puffer ist zu klein"
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "Buffer müssen gleich lang sein"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr "Tasten müssen digitalio.DigitalInOut sein"
@@ -1980,7 +1978,7 @@ msgstr "Kann '%q' Objekt nicht implizit nach %q konvertieren"
 msgid "can't convert NaN to int"
 msgstr "kann NaN nicht nach int konvertieren"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr "kann Adresse nicht in int konvertieren"
 
@@ -2345,10 +2343,6 @@ msgstr "Das erste Argument muss ein Ndarray sein"
 msgid "first argument to super() must be type"
 msgstr "Das erste Argument für super() muss type sein"
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr "Erstes Bit muss das höchstwertigste Bit (MSB) sein"
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr "Die Abflachungsreihenfolge muss entweder \"C\" oder \"F\" sein"
@@ -2534,14 +2528,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr "Das Intervall muss im Bereich %s-%s sein"
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "ungültige I2C Schnittstelle"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "ungültige SPI Schnittstelle"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "ungültige argumente"
@@ -2724,10 +2710,6 @@ msgstr "Mehrfache Vererbung nicht unterstützt"
 msgid "must raise an object"
 msgstr "muss ein Objekt verursachen (raise)"
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr "sck/mosi/miso müssen alle spezifiziert sein"
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr "muss Schlüsselwortargument für key function verwenden"
@@ -3560,6 +3542,9 @@ msgstr "Nullschritt"
 #~ msgid "GPIO16 does not support pull up."
 #~ msgstr "GPIO16 unterstützt pull up nicht"
 
+#~ msgid "I2C operation not supported"
+#~ msgstr "I2C-operation nicht unterstützt"
+
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Ungültiges bit clock pin"
 
@@ -3709,12 +3694,18 @@ msgstr "Nullschritt"
 #~ "Sie laufen im abgesicherten Modus, was bedeutet, dass etwas Unerwartetes "
 #~ "passiert ist.\n"
 
+#~ msgid "bits must be 8"
+#~ msgstr "bits müssen 8 sein"
+
 #~ msgid "buf is too small. need %d bytes"
 #~ msgstr "buf ist zu klein. brauche %d Bytes"
 
 #~ msgid "buffer too long"
 #~ msgstr "Buffer zu lang"
 
+#~ msgid "buffers must be the same length"
+#~ msgstr "Buffer müssen gleich lang sein"
+
 #~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
 #~ msgstr "byteorder ist keine Instanz von ByteOrder (%s erhalten)"
 
@@ -3730,6 +3721,9 @@ msgstr "Nullschritt"
 #~ msgid "ffi_prep_closure_loc"
 #~ msgstr "ffi_prep_closure_loc"
 
+#~ msgid "firstbit must be MSB"
+#~ msgstr "Erstes Bit muss das höchstwertigste Bit (MSB) sein"
+
 #~ msgid "flash location must be below 1MByte"
 #~ msgstr "flash location muss unter 1MByte sein"
 
@@ -3742,6 +3736,12 @@ msgstr "Nullschritt"
 #~ msgid "interval not in range 0.0020 to 10.24"
 #~ msgstr "Das Interval ist nicht im Bereich 0.0020 bis 10.24"
 
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "ungültige I2C Schnittstelle"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "ungültige SPI Schnittstelle"
+
 #~ msgid "invalid alarm"
 #~ msgstr "ungültiger Alarm"
 
@@ -3764,6 +3764,9 @@ msgstr "Nullschritt"
 #~ msgstr ""
 #~ "Speicherallozierung fehlgeschlagen, alloziere %u Bytes für nativen Code"
 
+#~ msgid "must specify all of sck/mosi/miso"
+#~ msgstr "sck/mosi/miso müssen alle spezifiziert sein"
+
 #~ msgid "name must be a string"
 #~ msgstr "name muss ein String sein"
 
diff --git a/locale/en_US.po b/locale/en_US.po
index 579fc6501..c89772779 100644
--- a/locale/en_US.po
+++ b/locale/en_US.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 08:56-0500\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -291,6 +291,7 @@ msgstr ""
 msgid "All timers for this pin are in use"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -298,7 +299,7 @@ msgstr ""
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr ""
 
@@ -572,6 +573,10 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
@@ -817,10 +822,6 @@ msgstr ""
 msgid "I2C Init Error"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr ""
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -962,7 +963,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1425,6 +1426,10 @@ msgstr ""
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr ""
@@ -1611,6 +1616,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -1652,6 +1658,26 @@ msgstr ""
 msgid "WARNING: Your code filename has two extensions\n"
 msgstr ""
 
+#: shared-bindings/watchdog/WatchDogTimer.c
+msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
+msgstr ""
+
+#: shared-bindings/watchdog/WatchDogTimer.c
+msgid "WatchDogTimer is not currently running"
+msgstr ""
+
+#: shared-bindings/watchdog/WatchDogTimer.c
+msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET"
+msgstr ""
+
+#: shared-bindings/watchdog/WatchDogTimer.c
+msgid "WatchDogTimer.timeout must be greater than 0"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Watchdog timer expired."
+msgstr ""
+
 #: py/builtinhelp.c
 #, c-format
 msgid ""
@@ -1700,11 +1726,11 @@ msgstr ""
 msgid "address %08x is not aligned to %d bytes"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -1785,10 +1811,6 @@ msgstr ""
 msgid "bits must be 7, 8 or 9"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr ""
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr ""
@@ -1814,10 +1836,6 @@ msgstr ""
 msgid "buffer too small"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr ""
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr ""
@@ -1893,7 +1911,7 @@ msgstr ""
 msgid "can't convert NaN to int"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr ""
 
@@ -2247,10 +2265,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr ""
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2435,14 +2449,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr ""
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr ""
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr ""
@@ -2619,10 +2625,6 @@ msgstr ""
 msgid "must raise an object"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr ""
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr ""
@@ -3059,6 +3061,10 @@ msgstr ""
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
+#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+msgid "timeout duration exceeded the maximum supported value"
+msgstr ""
+
 #: shared-bindings/busio/UART.c
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
@@ -3212,6 +3218,10 @@ msgstr ""
 msgid "value_count must be > 0"
 msgstr ""
 
+#: shared-bindings/watchdog/WatchDogTimer.c
+msgid "watchdog timeout must be greater than 0"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "window must be <= interval"
 msgstr ""
diff --git a/locale/en_x_pirate.po b/locale/en_x_pirate.po
index 0f1bf9105..16f2b3669 100644
--- a/locale/en_x_pirate.po
+++ b/locale/en_x_pirate.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 08:56-0500\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2020-03-30 22:11+0000\n"
 "Last-Translator: Tannewt <devnull@unpythonic.net>\n"
 "Language: en_x_pirate\n"
@@ -296,6 +296,7 @@ msgstr ""
 msgid "All timers for this pin are in use"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -303,7 +304,7 @@ msgstr ""
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr ""
 
@@ -579,6 +580,10 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
@@ -824,10 +829,6 @@ msgstr ""
 msgid "I2C Init Error"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr ""
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -969,7 +970,7 @@ msgstr "Belay that! Invalid pin for starboard-side channel"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1432,6 +1433,10 @@ msgstr ""
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr ""
@@ -1618,6 +1623,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -1659,6 +1665,26 @@ msgstr ""
 msgid "WARNING: Your code filename has two extensions\n"
 msgstr "Blimey! Yer code filename has two extensions\n"
 
+#: shared-bindings/watchdog/WatchDogTimer.c
+msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
+msgstr ""
+
+#: shared-bindings/watchdog/WatchDogTimer.c
+msgid "WatchDogTimer is not currently running"
+msgstr ""
+
+#: shared-bindings/watchdog/WatchDogTimer.c
+msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET"
+msgstr ""
+
+#: shared-bindings/watchdog/WatchDogTimer.c
+msgid "WatchDogTimer.timeout must be greater than 0"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Watchdog timer expired."
+msgstr ""
+
 #: py/builtinhelp.c
 #, c-format
 msgid ""
@@ -1707,11 +1733,11 @@ msgstr ""
 msgid "address %08x is not aligned to %d bytes"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -1792,10 +1818,6 @@ msgstr ""
 msgid "bits must be 7, 8 or 9"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "pieces must be of 8"
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr ""
@@ -1821,10 +1843,6 @@ msgstr ""
 msgid "buffer too small"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "yer buffers must be of the same length"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr ""
@@ -1900,7 +1918,7 @@ msgstr ""
 msgid "can't convert NaN to int"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr ""
 
@@ -2254,10 +2272,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr ""
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2442,14 +2456,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "Belay that! I2C peripheral be invalid"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "Arr! SPI peripheral be invalid"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr ""
@@ -2626,10 +2632,6 @@ msgstr ""
 msgid "must raise an object"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr ""
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr ""
@@ -3066,6 +3068,10 @@ msgstr ""
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
+#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+msgid "timeout duration exceeded the maximum supported value"
+msgstr ""
+
 #: shared-bindings/busio/UART.c
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
@@ -3219,6 +3225,10 @@ msgstr ""
 msgid "value_count must be > 0"
 msgstr ""
 
+#: shared-bindings/watchdog/WatchDogTimer.c
+msgid "watchdog timeout must be greater than 0"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "window must be <= interval"
 msgstr ""
@@ -3281,3 +3291,15 @@ msgstr ""
 
 #~ msgid "Invalid clock pin"
 #~ msgstr "Avast! Clock pin be invalid"
+
+#~ msgid "bits must be 8"
+#~ msgstr "pieces must be of 8"
+
+#~ msgid "buffers must be the same length"
+#~ msgstr "yer buffers must be of the same length"
+
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "Belay that! I2C peripheral be invalid"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "Arr! SPI peripheral be invalid"
diff --git a/locale/es.po b/locale/es.po
index 013750e93..22597249b 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2020-06-24 18:32+0000\n"
 "Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n"
 "Language-Team: \n"
@@ -302,6 +302,7 @@ msgstr ""
 msgid "All timers for this pin are in use"
 msgstr "Todos los timers para este pin están siendo utilizados"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -309,7 +310,7 @@ msgstr "Todos los timers para este pin están siendo utilizados"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "Todos los timers en uso"
 
@@ -589,6 +590,10 @@ msgstr "Archivo .mpy corrupto"
 msgid "Corrupt raw code"
 msgstr "Código crudo corrupto"
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "No se puede inicializar la UART"
@@ -835,10 +840,6 @@ msgstr "Operación I/O en archivo cerrado"
 msgid "I2C Init Error"
 msgstr "Error de inicio de I2C"
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr "operación I2C no soportada"
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -982,7 +983,7 @@ msgstr "Pin inválido para canal derecho"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1452,6 +1453,10 @@ msgstr "A Stream le falta el método readinto() o write()."
 msgid "Supply at least one UART pin"
 msgstr "Suministre al menos un pin UART"
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr "Lectura de temperatura expirada"
@@ -1640,6 +1645,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate no soportado"
 
@@ -1756,11 +1762,11 @@ msgstr "se llamó abort()"
 msgid "address %08x is not aligned to %d bytes"
 msgstr "la dirección %08x no esta alineada a %d bytes"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "address fuera de límites"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr "addresses esta vacío"
 
@@ -1841,10 +1847,6 @@ msgstr "operacion binaria %q no implementada"
 msgid "bits must be 7, 8 or 9"
 msgstr "bits deben ser 7, 8 ó 9"
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "bits debe ser 8"
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr "bits_per_sample debe ser 8 ó 16"
@@ -1871,10 +1873,6 @@ msgstr "Las secciones del buffer necesitan tener longitud igual"
 msgid "buffer too small"
 msgstr "buffer demasiado pequeño"
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "los buffers deben de tener la misma longitud"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr "los botones necesitan ser digitalio.DigitalInOut"
@@ -1950,7 +1948,7 @@ msgstr "no se puede convertir el objeto '%q' a %q implícitamente"
 msgid "can't convert NaN to int"
 msgstr "no se puede convertir Nan a int"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr "no se puede convertir address a int"
 
@@ -2311,10 +2309,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr "primer argumento para super() debe ser de tipo"
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr "firstbit debe ser MSB"
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2499,14 +2493,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "periférico I2C inválido"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "periférico SPI inválido"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "argumentos inválidos"
@@ -2686,10 +2672,6 @@ msgstr "herencia multiple no soportada"
 msgid "must raise an object"
 msgstr "debe hacer un raise de un objeto"
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr "se deben de especificar sck/mosi/miso"
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr "debe utilizar argumento de palabra clave para la función clave"
@@ -3526,6 +3508,9 @@ msgstr "paso cero"
 #~ msgid "GPIO16 does not support pull up."
 #~ msgstr "GPIO16 no soporta pull up."
 
+#~ msgid "I2C operation not supported"
+#~ msgstr "operación I2C no soportada"
+
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Pin bit clock inválido"
 
@@ -3695,12 +3680,18 @@ msgstr "paso cero"
 #~ msgid "bad GATT role"
 #~ msgstr "mal GATT role"
 
+#~ msgid "bits must be 8"
+#~ msgstr "bits debe ser 8"
+
 #~ msgid "buf is too small. need %d bytes"
 #~ msgstr "buf es demasiado pequeño. necesita %d bytes"
 
 #~ msgid "buffer too long"
 #~ msgstr "buffer demasiado largo"
 
+#~ msgid "buffers must be the same length"
+#~ msgstr "los buffers deben de tener la misma longitud"
+
 #~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
 #~ msgstr "byteorder no es instancia de ByteOrder (encontarmos un %s)"
 
@@ -3737,6 +3728,9 @@ msgstr "paso cero"
 #~ msgid "ffi_prep_closure_loc"
 #~ msgstr "ffi_prep_closure_loc"
 
+#~ msgid "firstbit must be MSB"
+#~ msgstr "firstbit debe ser MSB"
+
 #~ msgid "flash location must be below 1MByte"
 #~ msgstr "la ubicación de la flash debe estar debajo de 1MByte"
 
@@ -3749,6 +3743,12 @@ msgstr "paso cero"
 #~ msgid "interval not in range 0.0020 to 10.24"
 #~ msgstr "El intervalo está fuera del rango de 0.0020 a 10.24"
 
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "periférico I2C inválido"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "periférico SPI inválido"
+
 #~ msgid "invalid alarm"
 #~ msgstr "alarma inválida"
 
@@ -3771,6 +3771,9 @@ msgstr "paso cero"
 #~ msgstr ""
 #~ "falló la asignación de memoria, asignando %u bytes para código nativo"
 
+#~ msgid "must specify all of sck/mosi/miso"
+#~ msgstr "se deben de especificar sck/mosi/miso"
+
 #~ msgid "name must be a string"
 #~ msgstr "name debe de ser un string"
 
diff --git a/locale/fil.po b/locale/fil.po
index 66ccc711a..e4c5678d2 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -295,6 +295,7 @@ msgstr "Lahat ng sync event channels ay ginagamit"
 msgid "All timers for this pin are in use"
 msgstr "Lahat ng timers para sa pin na ito ay ginagamit"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -302,7 +303,7 @@ msgstr "Lahat ng timers para sa pin na ito ay ginagamit"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "Lahat ng timer ginagamit"
 
@@ -581,6 +582,10 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Hindi ma-initialize ang UART"
@@ -831,10 +836,6 @@ msgstr "I/O operasyon sa saradong file"
 msgid "I2C Init Error"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr "Hindi supportado ang operasyong I2C"
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -978,7 +979,7 @@ msgstr "Mali ang pin para sa kanang channel"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1448,6 +1449,10 @@ msgstr "Stream kulang ng readinto() o write() method."
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr ""
@@ -1635,6 +1640,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Hindi supportadong baudrate"
 
@@ -1753,11 +1759,11 @@ msgstr "abort() tinawag"
 msgid "address %08x is not aligned to %d bytes"
 msgstr "address %08x ay hindi pantay sa %d bytes"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "wala sa sakop ang address"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr "walang laman ang address"
 
@@ -1838,10 +1844,6 @@ msgstr "binary op %q hindi implemented"
 msgid "bits must be 7, 8 or 9"
 msgstr "bits ay dapat 7, 8 o 9"
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "bits ay dapat walo (8)"
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr "bits_per_sample ay dapat 8 o 16"
@@ -1868,10 +1870,6 @@ msgstr "aarehas na haba dapat ang buffer slices"
 msgid "buffer too small"
 msgstr "masyadong maliit ang buffer"
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "ang buffers ay dapat parehas sa haba"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr ""
@@ -1948,7 +1946,7 @@ msgstr "hindi maaaring i-convert ang '%q' na bagay sa %q nang walang pahiwatig"
 msgid "can't convert NaN to int"
 msgstr "hindi ma i-convert NaN sa int"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr "hindi ma i-convert ang address sa INT"
 
@@ -2312,10 +2310,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr "unang argument ng super() ay dapat type"
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr "firstbit ay dapat MSB"
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2501,14 +2495,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "maling I2C peripheral"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "hindi wastong SPI peripheral"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "mali ang mga argumento"
@@ -2689,10 +2675,6 @@ msgstr "maraming inhertance hindi sinusuportahan"
 msgid "must raise an object"
 msgstr "dapat itaas ang isang object"
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr "dapat tukuyin lahat ng SCK/MOSI/MISO"
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr "dapat gumamit ng keyword argument para sa key function"
@@ -3506,6 +3488,9 @@ msgstr "zero step"
 #~ msgid "GPIO16 does not support pull up."
 #~ msgstr "Walang pull down support ang GPI016."
 
+#~ msgid "I2C operation not supported"
+#~ msgstr "Hindi supportado ang operasyong I2C"
+
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Mali ang bit clock pin"
 
@@ -3647,9 +3632,15 @@ msgstr "zero step"
 #~ msgid "[addrinfo error %d]"
 #~ msgstr "[addrinfo error %d]"
 
+#~ msgid "bits must be 8"
+#~ msgstr "bits ay dapat walo (8)"
+
 #~ msgid "buffer too long"
 #~ msgstr "masyadong mahaba ng buffer"
 
+#~ msgid "buffers must be the same length"
+#~ msgstr "ang buffers ay dapat parehas sa haba"
+
 #~ msgid "can query only one param"
 #~ msgstr "maaaring i-query lamang ang isang param"
 
@@ -3680,6 +3671,9 @@ msgstr "zero step"
 #~ msgid "ffi_prep_closure_loc"
 #~ msgstr "ffi_prep_closure_loc"
 
+#~ msgid "firstbit must be MSB"
+#~ msgstr "firstbit ay dapat MSB"
+
 #~ msgid "flash location must be below 1MByte"
 #~ msgstr "dapat na mas mababa sa 1MB ang lokasyon ng flash"
 
@@ -3689,6 +3683,12 @@ msgstr "zero step"
 #~ msgid "impossible baudrate"
 #~ msgstr "impossibleng baudrate"
 
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "maling I2C peripheral"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "hindi wastong SPI peripheral"
+
 #~ msgid "invalid alarm"
 #~ msgstr "mali ang alarm"
 
@@ -3711,6 +3711,9 @@ msgstr "zero step"
 #~ msgstr ""
 #~ "nabigo ang paglalaan ng memorya, naglalaan ng %u bytes para sa native code"
 
+#~ msgid "must specify all of sck/mosi/miso"
+#~ msgstr "dapat tukuyin lahat ng SCK/MOSI/MISO"
+
 #, fuzzy
 #~ msgid "name must be a string"
 #~ msgstr "ang keywords dapat strings"
diff --git a/locale/fr.po b/locale/fr.po
index 20d42d49e..5a49fd5f9 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2020-06-05 17:29+0000\n"
 "Last-Translator: aberwag <aberwag@gmail.com>\n"
 "Language: fr\n"
@@ -302,6 +302,7 @@ msgstr "Tous les canaux d'événements de synchro sont utilisés"
 msgid "All timers for this pin are in use"
 msgstr "Tous les timers pour cette broche sont utilisés"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -309,7 +310,7 @@ msgstr "Tous les timers pour cette broche sont utilisés"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "Tous les timers sont utilisés"
 
@@ -597,6 +598,10 @@ msgstr "Fichier .mpy corrompu"
 msgid "Corrupt raw code"
 msgstr "Code brut corrompu"
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "L'UART n'a pu être initialisé"
@@ -844,10 +849,6 @@ msgstr "opération d'E/S sur un fichier fermé"
 msgid "I2C Init Error"
 msgstr "Erreur d'initialisation I2C"
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr "opération sur I2C non supportée"
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -991,7 +992,7 @@ msgstr "Broche invalide pour le canal droit"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1467,6 +1468,10 @@ msgstr "Il manque une méthode readinto() ou write() au flux."
 msgid "Supply at least one UART pin"
 msgstr "Fournissez au moins une broche UART"
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr "Temporisation de lecture dépassée"
@@ -1669,6 +1674,7 @@ msgstr ""
 "appareil ait été refusée ou ignorée."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Débit non supporté"
 
@@ -1788,11 +1794,11 @@ msgstr "abort() appelé"
 msgid "address %08x is not aligned to %d bytes"
 msgstr "l'adresse %08x n'est pas alignée sur %d octets"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "adresse hors limites"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr "adresses vides"
 
@@ -1873,10 +1879,6 @@ msgstr "opération binaire '%q' non implémentée"
 msgid "bits must be 7, 8 or 9"
 msgstr "bits doivent être 7, 8 ou 9"
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "les bits doivent être 8"
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr "'bits_per_sample' doivent être 8 ou 16"
@@ -1902,10 +1904,6 @@ msgstr "les tranches de tampon doivent être de longueurs égales"
 msgid "buffer too small"
 msgstr "tampon trop petit"
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "les tampons doivent être de la même longueur"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr "les boutons doivent être des digitalio.DigitalInOut"
@@ -1982,7 +1980,7 @@ msgstr "impossible de convertir l'objet '%q' en '%q' implicitement"
 msgid "can't convert NaN to int"
 msgstr "on ne peut convertir NaN en entier 'int'"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr "ne peut convertir l'adresse en entier 'int'"
 
@@ -2351,10 +2349,6 @@ msgstr "le premier argument doit être un ndarray"
 msgid "first argument to super() must be type"
 msgstr "le premier argument de super() doit être un type"
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr "le 1er bit doit être le MSB"
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr "l'ordre d'aplatissement doit être «C» ou «F»"
@@ -2541,14 +2535,6 @@ msgstr "interp est défini pour les tableaux 1D de longueur égale"
 msgid "interval must be in range %s-%s"
 msgstr "l'intervalle doit être dans la plage %s-%s"
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "périphérique I2C invalide"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "périphérique SPI invalide"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "arguments invalides"
@@ -2729,10 +2715,6 @@ msgstr "héritages multiples non supportés"
 msgid "must raise an object"
 msgstr "doit lever un objet"
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr "sck, mosi et miso doivent tous être spécifiés"
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr "doit utiliser un argument nommé pour une fonction key"
@@ -3579,6 +3561,9 @@ msgstr "'step' nul"
 #~ msgid "GPIO16 does not support pull up."
 #~ msgstr "Le GPIO16 ne supporte pas le tirage (pull-up)"
 
+#~ msgid "I2C operation not supported"
+#~ msgstr "opération sur I2C non supportée"
+
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Broche invalide pour 'bit clock'"
 
@@ -3748,12 +3733,18 @@ msgstr "'step' nul"
 #~ msgid "bad GATT role"
 #~ msgstr "mauvais rôle GATT"
 
+#~ msgid "bits must be 8"
+#~ msgstr "les bits doivent être 8"
+
 #~ msgid "buf is too small. need %d bytes"
 #~ msgstr "'buf' est trop petit. Besoin de %d octets"
 
 #~ msgid "buffer too long"
 #~ msgstr "tampon trop long"
 
+#~ msgid "buffers must be the same length"
+#~ msgstr "les tampons doivent être de la même longueur"
+
 #~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
 #~ msgstr "'byteorder' n'est pas une instance de ByteOrder (reçu un %s)"
 
@@ -3792,6 +3783,9 @@ msgstr "'step' nul"
 #~ msgid "expecting a pin"
 #~ msgstr "une broche (Pin) est attendue"
 
+#~ msgid "firstbit must be MSB"
+#~ msgstr "le 1er bit doit être le MSB"
+
 #~ msgid "flash location must be below 1MByte"
 #~ msgstr "l'emplacement en mémoire flash doit être inférieur à 1Mo"
 
@@ -3804,6 +3798,12 @@ msgstr "'step' nul"
 #~ msgid "interval not in range 0.0020 to 10.24"
 #~ msgstr "intervalle hors bornes 0.0020 à 10.24"
 
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "périphérique I2C invalide"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "périphérique SPI invalide"
+
 #~ msgid "invalid alarm"
 #~ msgstr "alarme invalide"
 
@@ -3826,6 +3826,9 @@ msgstr "'step' nul"
 #~ msgstr ""
 #~ "l'allocation de mémoire a échoué en allouant %u octets pour un code natif"
 
+#~ msgid "must specify all of sck/mosi/miso"
+#~ msgstr "sck, mosi et miso doivent tous être spécifiés"
+
 #, fuzzy
 #~ msgid "name must be a string"
 #~ msgstr "les noms doivent être des chaînes de caractère"
diff --git a/locale/it_IT.po b/locale/it_IT.po
index 01368e88a..c47d0e8e3 100644
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -294,6 +294,7 @@ msgstr "Tutti i canali di eventi sincronizzati in uso"
 msgid "All timers for this pin are in use"
 msgstr "Tutti i timer per questo pin sono in uso"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -301,7 +302,7 @@ msgstr "Tutti i timer per questo pin sono in uso"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "Tutti i timer utilizzati"
 
@@ -582,6 +583,10 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Impossibile inizializzare l'UART"
@@ -831,10 +836,6 @@ msgstr "operazione I/O su file chiuso"
 msgid "I2C Init Error"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr "operazione I2C non supportata"
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -980,7 +981,7 @@ msgstr "Pin non valido per il canale destro"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1459,6 +1460,10 @@ msgstr "Metodi mancanti readinto() o write() allo stream."
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr ""
@@ -1646,6 +1651,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "baudrate non supportato"
 
@@ -1756,11 +1762,11 @@ msgstr "abort() chiamato"
 msgid "address %08x is not aligned to %d bytes"
 msgstr "l'indirizzo %08x non è allineato a %d bytes"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "indirizzo fuori limite"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr "gli indirizzi sono vuoti"
 
@@ -1841,10 +1847,6 @@ msgstr "operazione binaria %q non implementata"
 msgid "bits must be 7, 8 or 9"
 msgstr "i bit devono essere 7, 8 o 9"
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "i bit devono essere 8"
-
 #: shared-bindings/audiomixer/Mixer.c
 #, fuzzy
 msgid "bits_per_sample must be 8 or 16"
@@ -1873,10 +1875,6 @@ msgstr "slice del buffer devono essere della stessa lunghezza"
 msgid "buffer too small"
 msgstr "buffer troppo piccolo"
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "i buffer devono essere della stessa lunghezza"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr ""
@@ -1953,7 +1951,7 @@ msgstr "impossibile convertire l'oggetto '%q' implicitamente in %q"
 msgid "can't convert NaN to int"
 msgstr "impossibile convertire NaN in int"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr "impossible convertire indirizzo in int"
 
@@ -2313,10 +2311,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr "il primo bit deve essere il più significativo (MSB)"
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2502,14 +2496,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "periferica I2C invalida"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "periferica SPI invalida"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "argomenti non validi"
@@ -2691,10 +2677,6 @@ msgstr "ereditarietà multipla non supportata"
 msgid "must raise an object"
 msgstr "deve lanciare un oggetto"
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr "è necessario specificare tutte le sck/mosi/miso"
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr ""
@@ -3529,6 +3511,9 @@ msgstr "zero step"
 #~ msgid "GPIO16 does not support pull up."
 #~ msgstr "GPIO16 non supporta pull-up"
 
+#~ msgid "I2C operation not supported"
+#~ msgstr "operazione I2C non supportata"
+
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Pin del clock di bit non valido"
 
@@ -3636,9 +3621,15 @@ msgstr "zero step"
 #~ msgid "[addrinfo error %d]"
 #~ msgstr "[errore addrinfo %d]"
 
+#~ msgid "bits must be 8"
+#~ msgstr "i bit devono essere 8"
+
 #~ msgid "buffer too long"
 #~ msgstr "buffer troppo lungo"
 
+#~ msgid "buffers must be the same length"
+#~ msgstr "i buffer devono essere della stessa lunghezza"
+
 #~ msgid "can query only one param"
 #~ msgstr "è possibile interrogare solo un parametro"
 
@@ -3669,6 +3660,9 @@ msgstr "zero step"
 #~ msgid "ffi_prep_closure_loc"
 #~ msgstr "ffi_prep_closure_loc"
 
+#~ msgid "firstbit must be MSB"
+#~ msgstr "il primo bit deve essere il più significativo (MSB)"
+
 #~ msgid "flash location must be below 1MByte"
 #~ msgstr "Locazione della flash deve essere inferiore a 1mb"
 
@@ -3678,6 +3672,12 @@ msgstr "zero step"
 #~ msgid "impossible baudrate"
 #~ msgstr "baudrate impossibile"
 
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "periferica I2C invalida"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "periferica SPI invalida"
+
 #~ msgid "invalid alarm"
 #~ msgstr "alarm non valido"
 
@@ -3700,6 +3700,9 @@ msgstr "zero step"
 #~ msgstr ""
 #~ "allocazione di memoria fallita, allocazione di %d byte per codice nativo"
 
+#~ msgid "must specify all of sck/mosi/miso"
+#~ msgstr "è necessario specificare tutte le sck/mosi/miso"
+
 #, fuzzy
 #~ msgid "name must be a string"
 #~ msgstr "argomenti nominati devono essere stringhe"
diff --git a/locale/ko.po b/locale/ko.po
index 27f8216f8..156f40d9b 100644
--- a/locale/ko.po
+++ b/locale/ko.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2019-05-06 14:22-0700\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -293,6 +293,7 @@ msgstr ""
 msgid "All timers for this pin are in use"
 msgstr "핀의 모든 타이머가 사용 중입니다"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -300,7 +301,7 @@ msgstr "핀의 모든 타이머가 사용 중입니다"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "모든 타이머가 사용 중입니다"
 
@@ -576,6 +577,10 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
@@ -821,10 +826,6 @@ msgstr ""
 msgid "I2C Init Error"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr ""
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -966,7 +967,7 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1429,6 +1430,10 @@ msgstr ""
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr ""
@@ -1616,6 +1621,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -1725,11 +1731,11 @@ msgstr ""
 msgid "address %08x is not aligned to %d bytes"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -1810,10 +1816,6 @@ msgstr ""
 msgid "bits must be 7, 8 or 9"
 msgstr "비트(bits)는 7, 8 또는 9 여야합니다"
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "비트(bits)는 8이어야합니다"
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr "bits_per_sample은 8 또는 16이어야합니다."
@@ -1839,10 +1841,6 @@ msgstr ""
 msgid "buffer too small"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr ""
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr ""
@@ -1918,7 +1916,7 @@ msgstr ""
 msgid "can't convert NaN to int"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr ""
 
@@ -2272,10 +2270,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr ""
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2460,14 +2454,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "ICT주변 기기가 유효하지 않습니다"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "SPI주변 기기가 유효하지 않습니다"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr ""
@@ -2644,10 +2630,6 @@ msgstr ""
 msgid "must raise an object"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr ""
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr ""
@@ -3319,3 +3301,12 @@ msgstr ""
 
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "스캔을 계속할 수 없습니다, 오류 0x%04x"
+
+#~ msgid "bits must be 8"
+#~ msgstr "비트(bits)는 8이어야합니다"
+
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "ICT주변 기기가 유효하지 않습니다"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "SPI주변 기기가 유효하지 않습니다"
diff --git a/locale/nl.po b/locale/nl.po
index 5be371d83..77cc11cab 100644
--- a/locale/nl.po
+++ b/locale/nl.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2020-06-02 19:50+0000\n"
 "Last-Translator: _fonzlate <vooralfred@gmail.com>\n"
 "Language-Team: none\n"
@@ -299,6 +299,7 @@ msgstr "Alle sync event kanalen zijn in gebruik"
 msgid "All timers for this pin are in use"
 msgstr "Alle timers voor deze pin zijn in gebruik"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -306,7 +307,7 @@ msgstr "Alle timers voor deze pin zijn in gebruik"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "Alle timers zijn in gebruik"
 
@@ -588,6 +589,10 @@ msgstr "Corrupt .mpy bestand"
 msgid "Corrupt raw code"
 msgstr "Corrupt raw code"
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Kan UART niet initialiseren"
@@ -835,10 +840,6 @@ msgstr "I/O actie op gesloten bestand"
 msgid "I2C Init Error"
 msgstr "I2C Init Fout"
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr "I2C actie niet ondersteund"
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -982,7 +983,7 @@ msgstr "Ongeldige pin voor rechter kanaal"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1459,6 +1460,10 @@ msgstr "Stream mist readinto() of write() methode."
 msgid "Supply at least one UART pin"
 msgstr "Geef op zijn minst 1 UART pin op"
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr "Temperatuur lees time-out"
@@ -1655,6 +1660,7 @@ msgstr ""
 "apparaat geweigerd of genegeerd werd."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Niet-ondersteunde baudsnelheid"
 
@@ -1773,11 +1779,11 @@ msgstr "abort() aangeroepen"
 msgid "address %08x is not aligned to %d bytes"
 msgstr "adres %08x is niet afgestemd op %d bytes"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "adres buiten bereik"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr "adressen zijn leeg"
 
@@ -1858,10 +1864,6 @@ msgstr "binaire op %q niet geïmplementeerd"
 msgid "bits must be 7, 8 or 9"
 msgstr "bits moet 7, 8, of 9 zijn"
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "bits moet 8 zijn"
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr "bits_per_sample moet 8 of 16 zijn"
@@ -1887,10 +1889,6 @@ msgstr "buffer slices moeten van gelijke grootte zijn"
 msgid "buffer too small"
 msgstr "buffer te klein"
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "buffers moeten dezelfde lengte hebben"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr "buttons moeten digitalio.DigitalInOut zijn"
@@ -1967,7 +1965,7 @@ msgstr "kan '%q' object niet omzetten naar %q impliciet"
 msgid "can't convert NaN to int"
 msgstr "kan NaN niet omzetten naar int"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr "kan adres niet omzetten naar int"
 
@@ -2324,10 +2322,6 @@ msgstr "eerst argument moet een ndarray zijn"
 msgid "first argument to super() must be type"
 msgstr "eerste argument voor super() moet een type zijn"
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr "het eerste bit moet het MSB zijn"
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr "De afvlakkingsvolgorde moet ofwel \"C\", ofwel \"F\" zijn"
@@ -2513,14 +2507,6 @@ msgstr "interp is gedefinieerd for eendimensionale arrays van gelijke lengte"
 msgid "interval must be in range %s-%s"
 msgstr "interval moet binnen bereik %s-%s vallen"
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "onjuist I2C randapparaat"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "onjuist SPI randapparaat"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "ongeldige argumenten"
@@ -2700,10 +2686,6 @@ msgstr "meervoudige overerving niet ondersteund"
 msgid "must raise an object"
 msgstr "moet een object oproepen (raise)"
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr "sck/mosi/miso moeten alle gespecificeerd worden"
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr "voor sleutelfunctie moet een trefwoordargument gebruikt worden"
@@ -3352,5 +3334,26 @@ msgstr "y-waarde buiten bereik"
 msgid "zero step"
 msgstr "nul-stap"
 
+#~ msgid "I2C operation not supported"
+#~ msgstr "I2C actie niet ondersteund"
+
 #~ msgid "Negative step not supported"
 #~ msgstr "Negatieve stappen niet ondersteund"
+
+#~ msgid "bits must be 8"
+#~ msgstr "bits moet 8 zijn"
+
+#~ msgid "buffers must be the same length"
+#~ msgstr "buffers moeten dezelfde lengte hebben"
+
+#~ msgid "firstbit must be MSB"
+#~ msgstr "het eerste bit moet het MSB zijn"
+
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "onjuist I2C randapparaat"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "onjuist SPI randapparaat"
+
+#~ msgid "must specify all of sck/mosi/miso"
+#~ msgstr "sck/mosi/miso moeten alle gespecificeerd worden"
diff --git a/locale/pl.po b/locale/pl.po
index 0e82359f9..888ce6428 100644
--- a/locale/pl.po
+++ b/locale/pl.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2019-03-19 18:37-0700\n"
 "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n"
 "Language-Team: pl\n"
@@ -292,6 +292,7 @@ msgstr "Wszystkie kanały zdarzeń synchronizacji w użyciu"
 msgid "All timers for this pin are in use"
 msgstr "Wszystkie timery tej nóżki w użyciu"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -299,7 +300,7 @@ msgstr "Wszystkie timery tej nóżki w użyciu"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "Wszystkie timery w użyciu"
 
@@ -575,6 +576,10 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Ustawienie UART nie powiodło się"
@@ -820,10 +825,6 @@ msgstr "Operacja I/O na zamkniętym pliku"
 msgid "I2C Init Error"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr "Operacja I2C nieobsługiwana"
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -967,7 +968,7 @@ msgstr "Zła nóżka dla prawego kanału"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1430,6 +1431,10 @@ msgstr "Strumień nie ma metod readinto() lub write()."
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr ""
@@ -1616,6 +1621,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Zła szybkość transmisji"
 
@@ -1728,11 +1734,11 @@ msgstr "Wywołano abort()"
 msgid "address %08x is not aligned to %d bytes"
 msgstr "adres %08x nie jest wyrównany do %d bajtów"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "adres poza zakresem"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr "adres jest pusty"
 
@@ -1813,10 +1819,6 @@ msgstr "brak dwu-argumentowego operatora %q"
 msgid "bits must be 7, 8 or 9"
 msgstr "bits musi być 7, 8 lub 9"
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "bits musi być 8"
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr "bits_per_sample musi być 8 lub 16"
@@ -1842,10 +1844,6 @@ msgstr "fragmenty bufora muszą mieć tę samą długość"
 msgid "buffer too small"
 msgstr "zbyt mały bufor"
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "bufory muszą mieć tę samą długość"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr "buttons musi być digitalio.DigitalInOut"
@@ -1921,7 +1919,7 @@ msgstr "nie można automatycznie skonwertować '%q' do '%q'"
 msgid "can't convert NaN to int"
 msgstr "nie można skonwertować NaN do int"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr "nie można skonwertować adresu do int"
 
@@ -2276,10 +2274,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr "pierwszy argument super() musi być typem"
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr "firstbit musi być MSB"
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2464,14 +2458,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "złe I2C"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "złe SPI"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "złe arguemnty"
@@ -2648,10 +2634,6 @@ msgstr "wielokrotne dziedzicznie niewspierane"
 msgid "must raise an object"
 msgstr "wyjątek musi być obiektem"
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr "sck/mosi/miso muszą być podane"
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr "funkcja key musi być podana jako argument nazwany"
@@ -3426,6 +3408,9 @@ msgstr "zerowy krok"
 #~ msgid "Flash write failed to start, err 0x%04x"
 #~ msgstr "Nie udało się rozpocząć zapisu do flash, błąd 0x%04x"
 
+#~ msgid "I2C operation not supported"
+#~ msgstr "Operacja I2C nieobsługiwana"
+
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Zła nóżka zegara"
 
@@ -3523,9 +3508,15 @@ msgstr "zerowy krok"
 #~ msgid "bad GATT role"
 #~ msgstr "zła rola GATT"
 
+#~ msgid "bits must be 8"
+#~ msgstr "bits musi być 8"
+
 #~ msgid "buf is too small. need %d bytes"
 #~ msgstr "buf zbyt mały. Wymagane %d bajtów"
 
+#~ msgid "buffers must be the same length"
+#~ msgstr "bufory muszą mieć tę samą długość"
+
 #~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
 #~ msgstr "byteorder musi być typu ByteOrder (jest %s)"
 
@@ -3536,9 +3527,21 @@ msgstr "zerowy krok"
 #~ msgid "color buffer must be a buffer or int"
 #~ msgstr "bufor kolorów musi być typu buffer lub int"
 
+#~ msgid "firstbit must be MSB"
+#~ msgstr "firstbit musi być MSB"
+
 #~ msgid "interval not in range 0.0020 to 10.24"
 #~ msgstr "przedział poza zakresem 0.0020 do 10.24"
 
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "złe I2C"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "złe SPI"
+
+#~ msgid "must specify all of sck/mosi/miso"
+#~ msgstr "sck/mosi/miso muszą być podane"
+
 #~ msgid "name must be a string"
 #~ msgstr "nazwa musi być łańcuchem"
 
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index 308809a2b..e951df108 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2018-10-02 21:14-0000\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -294,6 +294,7 @@ msgstr ""
 msgid "All timers for this pin are in use"
 msgstr "Todos os temporizadores para este pino estão em uso"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -301,7 +302,7 @@ msgstr "Todos os temporizadores para este pino estão em uso"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "Todos os temporizadores em uso"
 
@@ -578,6 +579,10 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Não foi possível inicializar o UART"
@@ -826,10 +831,6 @@ msgstr "Operação I/O no arquivo fechado"
 msgid "I2C Init Error"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr "I2C operação não suportada"
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -973,7 +974,7 @@ msgstr "Pino inválido para canal direito"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1442,6 +1443,10 @@ msgstr ""
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr ""
@@ -1628,6 +1633,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Taxa de transmissão não suportada"
 
@@ -1738,11 +1744,11 @@ msgstr "abort() chamado"
 msgid "address %08x is not aligned to %d bytes"
 msgstr "endereço %08x não está alinhado com %d bytes"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -1823,10 +1829,6 @@ msgstr ""
 msgid "bits must be 7, 8 or 9"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "bits devem ser 8"
-
 #: shared-bindings/audiomixer/Mixer.c
 #, fuzzy
 msgid "bits_per_sample must be 8 or 16"
@@ -1855,10 +1857,6 @@ msgstr ""
 msgid "buffer too small"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "buffers devem ser o mesmo tamanho"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr ""
@@ -1934,7 +1932,7 @@ msgstr ""
 msgid "can't convert NaN to int"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr ""
 
@@ -2289,10 +2287,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr "firstbit devem ser MSB"
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2477,14 +2471,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "periférico I2C inválido"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "periférico SPI inválido"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "argumentos inválidos"
@@ -2661,10 +2647,6 @@ msgstr ""
 msgid "must raise an object"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr "deve especificar todos sck/mosi/miso"
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr ""
@@ -3439,6 +3421,9 @@ msgstr "passo zero"
 #~ msgid "GPIO16 does not support pull up."
 #~ msgstr "GPIO16 não suporta pull up."
 
+#~ msgid "I2C operation not supported"
+#~ msgstr "I2C operação não suportada"
+
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Pino de bit clock inválido"
 
@@ -3512,9 +3497,15 @@ msgstr "passo zero"
 #~ msgid "Use esptool to erase flash and re-upload Python instead"
 #~ msgstr "Use o esptool para apagar o flash e recarregar o Python"
 
+#~ msgid "bits must be 8"
+#~ msgstr "bits devem ser 8"
+
 #~ msgid "buffer too long"
 #~ msgstr "buffer muito longo"
 
+#~ msgid "buffers must be the same length"
+#~ msgstr "buffers devem ser o mesmo tamanho"
+
 #~ msgid "can query only one param"
 #~ msgstr "pode consultar apenas um parâmetro"
 
@@ -3539,6 +3530,9 @@ msgstr "passo zero"
 #~ msgid "ffi_prep_closure_loc"
 #~ msgstr "ffi_prep_closure_loc"
 
+#~ msgid "firstbit must be MSB"
+#~ msgstr "firstbit devem ser MSB"
+
 #~ msgid "flash location must be below 1MByte"
 #~ msgstr "o local do flash deve estar abaixo de 1 MByte"
 
@@ -3548,6 +3542,12 @@ msgstr "passo zero"
 #~ msgid "impossible baudrate"
 #~ msgstr "taxa de transmissão impossível"
 
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "periférico I2C inválido"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "periférico SPI inválido"
+
 #~ msgid "invalid alarm"
 #~ msgstr "Alarme inválido"
 
@@ -3569,6 +3569,9 @@ msgstr "passo zero"
 #~ msgid "memory allocation failed, allocating %u bytes for native code"
 #~ msgstr "alocação de memória falhou, alocando %u bytes para código nativo"
 
+#~ msgid "must specify all of sck/mosi/miso"
+#~ msgstr "deve especificar todos sck/mosi/miso"
+
 #, fuzzy
 #~ msgid "name must be a string"
 #~ msgstr "heap deve ser uma lista"
diff --git a/locale/sv.po b/locale/sv.po
index bf9bb3f5d..df2431c4e 100644
--- a/locale/sv.po
+++ b/locale/sv.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2020-06-03 18:59+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -299,6 +299,7 @@ msgstr "Alla händelsekanaler används"
 msgid "All timers for this pin are in use"
 msgstr "Alla timers för denna pinne är i bruk"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -306,7 +307,7 @@ msgstr "Alla timers för denna pinne är i bruk"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "Alla timers används"
 
@@ -588,6 +589,10 @@ msgstr "Skadad .mpy-fil"
 msgid "Corrupt raw code"
 msgstr "Korrupt rå kod"
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Det gick inte att initiera UART"
@@ -833,10 +838,6 @@ msgstr "I/O-operation på stängd fil"
 msgid "I2C Init Error"
 msgstr "I2C init-fel"
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr "I2C-åtgärd stöds inte"
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -980,7 +981,7 @@ msgstr "Ogiltig pinne för höger kanal"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1455,6 +1456,10 @@ msgstr "Stream saknar readinto() eller write() metod."
 msgid "Supply at least one UART pin"
 msgstr "Ange minst en UART-pinne"
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr "Temperaturavläsning tog för lång tid"
@@ -1651,6 +1656,7 @@ msgstr ""
 "eller ignorerades."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate stöd inte"
 
@@ -1766,11 +1772,11 @@ msgstr "abort() anropad"
 msgid "address %08x is not aligned to %d bytes"
 msgstr "adressen %08x är inte justerad till %d byte"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "adress utanför gränsen"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr "adresserna är tomma"
 
@@ -1851,10 +1857,6 @@ msgstr "binär op %q är inte implementerad"
 msgid "bits must be 7, 8 or 9"
 msgstr "bits måste vara 7, 8 eller 9"
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "bits måste vara 8"
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr "bits_per_sample måste vara 8 eller 16"
@@ -1880,10 +1882,6 @@ msgstr "buffertsegmenten måste vara lika långa"
 msgid "buffer too small"
 msgstr "buffert för liten"
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "buffertar måste vara samma längd"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr "buttons måste vara digitalio.DigitalInOut"
@@ -1959,7 +1957,7 @@ msgstr "kan inte konvertera '%q' objekt implicit till %q"
 msgid "can't convert NaN to int"
 msgstr "kan inte konvertera NaN till int"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr "kan inte konvertera address till int"
 
@@ -2318,10 +2316,6 @@ msgstr "första argumentet måste vara en ndarray"
 msgid "first argument to super() must be type"
 msgstr "första argumentet till super() måste vara typ"
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr "firstbit måste vara MSB"
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr "förenklingsordningen måste vara antingen \"C\" eller \"F\""
@@ -2506,14 +2500,6 @@ msgstr "interp är definierad för 1D-matriser med samma längd"
 msgid "interval must be in range %s-%s"
 msgstr "interval måste vara i intervallet %s-%s"
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "ogiltig I2C-kringutrustning"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "ogiltig SPI-kringutrustning"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "ogiltiga argument"
@@ -2693,10 +2679,6 @@ msgstr "multipelt arv stöds inte"
 msgid "must raise an object"
 msgstr "måste ge ett objekt"
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr "måste ange alla av sck/mosi/miso"
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr "måste använda nyckelordsargument för nyckelfunktion"
@@ -3345,8 +3327,29 @@ msgstr "y-värde utanför intervall"
 msgid "zero step"
 msgstr "noll steg"
 
+#~ msgid "I2C operation not supported"
+#~ msgstr "I2C-åtgärd stöds inte"
+
 #~ msgid "Negative step not supported"
 #~ msgstr "Negativt step stöds inte"
 
+#~ msgid "bits must be 8"
+#~ msgstr "bits måste vara 8"
+
+#~ msgid "buffers must be the same length"
+#~ msgstr "buffertar måste vara samma längd"
+
 #~ msgid "empty %q list"
 #~ msgstr "tom %q-lista"
+
+#~ msgid "firstbit must be MSB"
+#~ msgstr "firstbit måste vara MSB"
+
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "ogiltig I2C-kringutrustning"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "ogiltig SPI-kringutrustning"
+
+#~ msgid "must specify all of sck/mosi/miso"
+#~ msgstr "måste ange alla av sck/mosi/miso"
diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po
index 9f44fbd9e..4f85c5fa8 100644
--- a/locale/zh_Latn_pinyin.po
+++ b/locale/zh_Latn_pinyin.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-06-25 11:44-0500\n"
 "PO-Revision-Date: 2019-04-13 10:10-0700\n"
 "Last-Translator: hexthat\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@@ -298,6 +298,7 @@ msgstr "Suǒyǒu tóngbù shìjiàn píndào shǐyòng"
 msgid "All timers for this pin are in use"
 msgstr "Cǐ yǐn jiǎo de suǒyǒu jìshí qì zhèngzài shǐyòng"
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -305,7 +306,7 @@ msgstr "Cǐ yǐn jiǎo de suǒyǒu jìshí qì zhèngzài shǐyòng"
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr "Suǒyǒu jìshí qì shǐyòng"
 
@@ -583,6 +584,10 @@ msgstr "Fǔbài de .mpy wénjiàn"
 msgid "Corrupt raw code"
 msgstr "Sǔnhuài de yuánshǐ dàimǎ"
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Wúfǎ chūshǐhuà UART"
@@ -828,10 +833,6 @@ msgstr "Wénjiàn shàng de I/ O cāozuò"
 msgid "I2C Init Error"
 msgstr "I2C chūshǐhuà cuòwù"
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr "I2C cāozuò bù zhīchí"
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -975,7 +976,7 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào"
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
@@ -1444,6 +1445,10 @@ msgstr "Liú quēshǎo readinto() huò write() fāngfǎ."
 msgid "Supply at least one UART pin"
 msgstr "Dìngyì zhìshǎo yīgè UART yǐn jiǎo"
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr ""
@@ -1639,6 +1644,7 @@ msgstr ""
 "huò hūlüè."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Bù zhīchí de baudrate"
 
@@ -1753,11 +1759,11 @@ msgstr "zhōngzhǐ () diàoyòng"
 msgid "address %08x is not aligned to %d bytes"
 msgstr "wèi zhǐ %08x wèi yǔ %d wèi yuán zǔ duìqí"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "dìzhǐ chāochū biānjiè"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr "dìzhǐ wèi kōng"
 
@@ -1838,10 +1844,6 @@ msgstr "èrjìnzhì bǎn qián bǎn %q wèi zhíxíng"
 msgid "bits must be 7, 8 or 9"
 msgstr "bǐtè bìxū shì 7,8 huò 9"
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr "bǐtè bìxū shì 8"
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr "měi jiàn yàngběn bìxū wèi 8 huò 16"
@@ -1867,10 +1869,6 @@ msgstr "huǎnchōng qū qiēpiàn bìxū chángdù xiāngděng"
 msgid "buffer too small"
 msgstr "huǎnchōng qū tài xiǎo"
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr "huǎnchōng qū bìxū shì chángdù xiāngtóng"
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr "ànniǔ bìxū shì digitalio.DigitalInOut"
@@ -1946,7 +1944,7 @@ msgstr "wúfǎ jiāng '%q' duìxiàng zhuǎnhuàn wèi %q yǐn hán"
 msgid "can't convert NaN to int"
 msgstr "wúfǎ jiāng dǎoháng zhuǎnhuàn wèi int"
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr "wúfǎ jiāng dìzhǐ zhuǎnhuàn wèi int"
 
@@ -2304,10 +2302,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr "chāojí () de dì yī gè cānshù bìxū shì lèixíng"
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr "dì yī wèi bìxū shì MSB"
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2492,14 +2486,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr "Jiàngé bìxū zài %s-%s fànwéi nèi"
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr "wúxiào de I2C wàiwéi qì"
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr "wúxiào de SPI wàiwéi qì"
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "wúxiào de cānshù"
@@ -2677,10 +2663,6 @@ msgstr "bù zhīchí duō gè jìchéng"
 msgid "must raise an object"
 msgstr "bìxū tíchū duìxiàng"
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr "bìxū zhǐdìng suǒyǒu sck/mosi/misco"
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr "bìxū shǐyòng guānjiàn cí cānshù"
@@ -3485,6 +3467,9 @@ msgstr "líng bù"
 #~ msgid "Flash write failed to start, err 0x%04x"
 #~ msgstr "Flash xiě rù shībài, err 0x%04x"
 
+#~ msgid "I2C operation not supported"
+#~ msgstr "I2C cāozuò bù zhīchí"
+
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Wúxiào de wèi shízhōng yǐn jiǎo"
 
@@ -3605,9 +3590,15 @@ msgstr "líng bù"
 #~ msgid "bad GATT role"
 #~ msgstr "zǒng xiédìng de bùliáng juésè"
 
+#~ msgid "bits must be 8"
+#~ msgstr "bǐtè bìxū shì 8"
+
 #~ msgid "buf is too small. need %d bytes"
 #~ msgstr "huǎnchōng tài xiǎo. Xūyào%d zì jié"
 
+#~ msgid "buffers must be the same length"
+#~ msgstr "huǎnchōng qū bìxū shì chángdù xiāngtóng"
+
 #~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
 #~ msgstr "zì jié bùshì zì jié xù shílì (yǒu %s)"
 
@@ -3620,9 +3611,21 @@ msgstr "líng bù"
 #~ msgid "expected a DigitalInOut"
 #~ msgstr "qídài de DigitalInOut"
 
+#~ msgid "firstbit must be MSB"
+#~ msgstr "dì yī wèi bìxū shì MSB"
+
 #~ msgid "interval not in range 0.0020 to 10.24"
 #~ msgstr "jùlí 0.0020 Zhì 10.24 Zhī jiān de jiàngé shíjiān"
 
+#~ msgid "invalid I2C peripheral"
+#~ msgstr "wúxiào de I2C wàiwéi qì"
+
+#~ msgid "invalid SPI peripheral"
+#~ msgstr "wúxiào de SPI wàiwéi qì"
+
+#~ msgid "must specify all of sck/mosi/miso"
+#~ msgstr "bìxū zhǐdìng suǒyǒu sck/mosi/misco"
+
 #~ msgid "name must be a string"
 #~ msgstr "míngchēng bìxū shì yīgè zìfú chuàn"