Delete a bunch of docs, drivers and examples not relevant to CircuitPython.

This fixes #345 and fixes #215.

1 files changed, 0 insertions, 81 deletions

diff --git a/docs/esp8266/tutorial/network_basics.rst b/docs/esp8266/tutorial/network_basics.rst
deleted file mode 100644
index 95d8cba4f..000000000
--- a/docs/esp8266/tutorial/network_basics.rst
+++ /dev/null
@@ -1,81 +0,0 @@
-Network basics
-==============
-
-The network module is used to configure the WiFi connection.  There are two WiFi
-interfaces, one for the station (when the ESP8266 connects to a router) and one
-for the access point (for other devices to connect to the ESP8266).  Create
-instances of these objects using::
-
-    >>> import network
-    >>> sta_if = network.WLAN(network.STA_IF)
-    >>> ap_if = network.WLAN(network.AP_IF)
-
-You can check if the interfaces are active by::
-
-    >>> sta_if.active()
-    False
-    >>> ap_if.active()
-    True
-
-You can also check the network settings of the interface by::
-
-    >>> ap_if.ifconfig()
-    ('192.168.4.1', '255.255.255.0', '192.168.4.1', '8.8.8.8')
-
-The returned values are: IP address, netmask, gateway, DNS.
-
-Configuration of the WiFi
--------------------------
-
-Upon a fresh install the ESP8266 is configured in access point mode, so the
-AP_IF interface is active and the STA_IF interface is inactive.  You can
-configure the module to connect to your own network using the STA_IF interface.
-
-First activate the station interface::
-
-    >>> sta_if.active(True)
-
-Then connect to your WiFi network::
-
-    >>> sta_if.connect('<your ESSID>', '<your password>')
-
-To check if the connection is established use::
-
-    >>> sta_if.isconnected()
-
-Once established you can check the IP address::
-
-    >>> sta_if.ifconfig()
-    ('192.168.0.2', '255.255.255.0', '192.168.0.1', '8.8.8.8')
-
-You can then disable the access-point interface if you no longer need it::
-
-    >>> ap_if.active(False)
-
-Here is a function you can run (or put in your boot.py file) to automatically
-connect to your WiFi network::
-
-    def do_connect():
-        import network
-        sta_if = network.WLAN(network.STA_IF)
-        if not sta_if.isconnected():
-            print('connecting to network...')
-            sta_if.active(True)
-            sta_if.connect('<essid>', '<password>')
-            while not sta_if.isconnected():
-                pass
-        print('network config:', sta_if.ifconfig())
-
-Sockets
--------
-
-Once the WiFi is set up the way to access the network is by using sockets.
-A socket represents an endpoint on a network device, and when two sockets are
-connected together communication can proceed.
-Internet protocols are built on top of sockets, such as email (SMTP), the web
-(HTTP), telnet, ssh, among many others.  Each of these protocols is assigned
-a specific port, which is just an integer.  Given an IP address and a port
-number you can connect to a remote device and start talking with it.
-
-The next part of the tutorial discusses how to use sockets to do some common
-and useful network tasks.