Merge pull request #1 from adafruit/main

merge from adafruit

1 files changed, 285 insertions, 34 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index af9491c04..b4445abfb 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-09 14:33-0700\n"
+"POT-Creation-Date: 2020-11-04 21:18+0530\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -30,12 +30,6 @@ msgid ""
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"\n"
-"To exit, please reset the board without "
-msgstr ""
-
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr ""
@@ -98,7 +92,11 @@ msgstr ""
 msgid "%q must be a tuple of length 2"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: shared-bindings/canio/Match.c
+msgid "%q out of range"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/microcontroller/Pin.c
 msgid "%q pin invalid"
 msgstr ""
 
@@ -249,6 +247,10 @@ msgid "'return' outside function"
 msgstr ""
 
 #: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
+#: py/compile.c
 msgid "'yield' outside function"
 msgstr ""
 
@@ -273,6 +275,10 @@ msgstr ""
 msgid "A hardware interrupt channel is already in use"
 msgstr ""
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -282,15 +288,29 @@ msgstr ""
 msgid "Address type out of range"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/canio/CAN.c
+msgid "All CAN peripherals are in use"
+msgstr ""
+
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/peripherals/pcnt_handler.c
+msgid "All PCNT units in use"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/esp32s2/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
+msgid "All RX FIFOs in use"
+msgstr ""
+
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr ""
 
@@ -312,6 +332,9 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -322,11 +345,19 @@ msgstr ""
 msgid "Already advertising."
 msgstr ""
 
+#: ports/atmel-samd/common-hal/canio/Listener.c
+msgid "Already have all-matches listener"
+msgstr ""
+
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr ""
@@ -385,6 +416,10 @@ msgid ""
 "disable.\n"
 msgstr ""
 
+#: ports/esp32s2/common-hal/canio/CAN.c
+msgid "Baudrate not supported by peripheral"
+msgstr ""
+
 #: shared-module/displayio/Display.c
 #: shared-module/framebufferio/FramebufferDisplay.c
 msgid "Below minimum frame rate"
@@ -436,7 +471,7 @@ msgstr ""
 msgid "Buffer is not a bytearray."
 msgstr ""
 
-#: shared-bindings/displayio/Display.c
+#: ports/cxd56/common-hal/camera/Camera.c shared-bindings/displayio/Display.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Buffer is too small"
 msgstr ""
@@ -544,6 +579,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr ""
@@ -621,6 +657,10 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
+#: ports/cxd56/common-hal/camera/Camera.c
+msgid "Could not initialize Camera"
+msgstr ""
+
 #: ports/cxd56/common-hal/gnss/GNSS.c
 msgid "Could not initialize GNSS"
 msgstr ""
@@ -630,14 +670,15 @@ msgid "Could not initialize SDCard"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr ""
 
@@ -653,6 +694,10 @@ msgstr ""
 msgid "Could not restart PWM"
 msgstr ""
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr ""
@@ -743,6 +788,10 @@ msgstr ""
 msgid "ECB only operates on 16 bytes at a time"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -754,7 +803,7 @@ msgstr ""
 msgid "Error in regex"
 msgstr ""
 
-#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -800,6 +849,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -816,12 +869,21 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -830,6 +892,10 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr ""
@@ -847,6 +913,16 @@ msgstr ""
 msgid "File exists"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/esp32s2/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
+msgid "Filters too complex"
+msgstr ""
+
+#: ports/cxd56/common-hal/camera/Camera.c
+msgid "Format not supported"
+msgstr ""
+
 #: shared-module/framebufferio/FramebufferDisplay.c
 #, c-format
 msgid "Framebuffer requires %d bytes"
@@ -876,7 +952,8 @@ msgid "Group full"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
@@ -884,6 +961,10 @@ msgstr ""
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
+#: shared-bindings/wifi/Radio.c
+msgid "Hostname must be between 1 and 253 characters"
+msgstr ""
+
 #: extmod/vfs_posix_file.c py/objstringio.c
 msgid "I/O operation on closed file"
 msgstr ""
@@ -911,7 +992,11 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+msgid "Input taking too long"
+msgstr ""
+
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr ""
 
@@ -942,7 +1027,8 @@ msgid "Invalid %q pin"
 msgstr ""
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -954,6 +1040,11 @@ msgstr ""
 msgid "Invalid BMP file"
 msgstr ""
 
+#: shared-bindings/wifi/Radio.c
+msgid "Invalid BSSID"
+msgstr ""
+
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "Invalid DAC pin supplied"
 msgstr ""
@@ -1000,6 +1091,10 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr ""
@@ -1018,7 +1113,8 @@ msgid "Invalid phase"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/atmel-samd/common-hal/touchio/TouchIn.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr ""
@@ -1037,6 +1133,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1117,6 +1215,10 @@ msgstr ""
 msgid "Maximum x value when mirrored is %d"
 msgstr ""
 
+#: shared-bindings/canio/Message.c
+msgid "Messages limited to 8 bytes"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
@@ -1137,14 +1239,10 @@ msgstr ""
 msgid "Must be a %q subclass."
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c shared-bindings/busio/SPI.c
 msgid "Must provide MISO or MOSI pin"
 msgstr ""
 
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Must provide SCK pin"
-msgstr ""
-
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
@@ -1168,21 +1266,25 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1225,6 +1327,14 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr ""
@@ -1288,6 +1398,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1301,10 +1419,18 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
+#: shared-module/displayio/ColorConverter.c
+msgid "Only one color can be transparent at a time"
+msgstr ""
+
 #: shared-bindings/ipaddress/__init__.c
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1319,6 +1445,7 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1330,6 +1457,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -1364,6 +1492,12 @@ msgstr ""
 msgid "Polygon needs at least 3 points"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1393,12 +1527,13 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr ""
 
@@ -1432,6 +1567,10 @@ msgstr ""
 msgid "Refresh too soon"
 msgstr ""
 
+#: shared-bindings/canio/RemoteTransmissionRequest.c
+msgid "RemoteTransmissionRequests limited to 8 bytes"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Requested AES mode is unsupported"
 msgstr ""
@@ -1452,7 +1591,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
@@ -1505,6 +1644,10 @@ msgstr ""
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/cxd56/common-hal/camera/Camera.c
+msgid "Size not supported"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@@ -1516,6 +1659,10 @@ msgstr ""
 msgid "Slices not supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr ""
@@ -1556,6 +1703,10 @@ msgid ""
 "exit safe mode.\n"
 msgstr ""
 
+#: shared-bindings/rgbmatrix/RGBMatrix.c
+msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The microcontroller's power dipped. Make sure your power supply provides\n"
@@ -1605,6 +1756,10 @@ msgid ""
 "Timer was reserved for internal use - declare PWM pins earlier in the program"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "To exit, please reset the board without "
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
@@ -1674,6 +1829,10 @@ msgstr ""
 msgid "Unable to allocate buffers for signed conversion"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1700,6 +1859,11 @@ msgstr ""
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1735,7 +1899,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -1925,7 +2089,7 @@ msgstr ""
 msgid "bad format string"
 msgstr ""
 
-#: py/binary.c
+#: py/binary.c py/objarray.c
 msgid "bad typecode"
 msgstr ""
 
@@ -1962,6 +2126,10 @@ msgstr ""
 msgid "buffer too small"
 msgstr ""
 
+#: shared-bindings/socketpool/Socket.c
+msgid "buffer too small for requested bytes"
+msgstr ""
+
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr ""
@@ -1975,9 +2143,14 @@ msgid "byteorder is not a string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr ""
 
+#: py/objarray.c
+msgid "bytes length not a multiple of item size"
+msgstr ""
+
 #: py/objstr.c
 msgid "bytes value out of range"
 msgstr ""
@@ -2288,6 +2461,14 @@ msgstr ""
 msgid "exceptions must derive from BaseException"
 msgstr ""
 
+#: shared-bindings/canio/CAN.c
+msgid "expected '%q' but got '%q'"
+msgstr ""
+
+#: shared-bindings/canio/CAN.c
+msgid "expected '%q' or '%q' but got '%q'"
+msgstr ""
+
 #: py/objstr.c
 msgid "expected ':' after format specifier"
 msgstr ""
@@ -2481,7 +2662,7 @@ msgstr ""
 msgid "index is out of bounds"
 msgstr ""
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr ""
 
@@ -2574,6 +2755,10 @@ msgstr ""
 msgid "invalid format specifier"
 msgstr ""
 
+#: shared-bindings/wifi/Radio.c
+msgid "invalid hostname"
+msgstr ""
+
 #: extmod/modussl_axtls.c
 msgid "invalid key"
 msgstr ""
@@ -2667,6 +2852,10 @@ msgstr ""
 msgid "long int not supported in this build"
 msgstr ""
 
+#: ports/esp32s2/common-hal/canio/CAN.c
+msgid "loopback + silent mode not supported by peripheral"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -2701,6 +2890,14 @@ msgstr ""
 msgid "maximum recursion depth exceeded"
 msgstr ""
 
+#: extmod/ulab/code/approx/approx.c
+msgid "maxiter must be > 0"
+msgstr ""
+
+#: extmod/ulab/code/approx/approx.c
+msgid "maxiter should be > 0"
+msgstr ""
+
 #: py/runtime.c
 #, c-format
 msgid "memory allocation failed, allocating %u bytes"
@@ -2943,6 +3140,11 @@ msgstr ""
 msgid "overflow converting long int to machine word"
 msgstr ""
 
+#: py/modstruct.c
+#, c-format
+msgid "pack expected %d items for packing (got %d)"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c
 msgid "palette must be 32 bytes long"
 msgstr ""
@@ -2979,6 +3181,10 @@ msgstr ""
 msgid "polygon can only be registered in one parent"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -2995,6 +3201,28 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr ""
@@ -3104,6 +3332,10 @@ msgstr ""
 msgid "sort argument must be an ndarray"
 msgstr ""
 
+#: extmod/ulab/code/numerical/numerical.c
+msgid "sorted axis can't be longer than 65535"
+msgstr ""
+
 #: extmod/ulab/code/filter/filter.c
 msgid "sos array must be of shape (n_section, 6)"
 msgstr ""
@@ -3233,8 +3465,19 @@ msgstr ""
 msgid "tuple/list has wrong length"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: shared-bindings/busio/UART.c
+#: ports/esp32s2/common-hal/canio/CAN.c
+#, c-format
+msgid "twai_driver_install returned esp-idf error #%d"
+msgstr ""
+
+#: ports/esp32s2/common-hal/canio/CAN.c
+#, c-format
+msgid "twai_start returned esp-idf error #%d"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr ""
 
@@ -3250,6 +3493,10 @@ msgstr ""
 msgid "type object '%q' has no attribute '%q'"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr ""
@@ -3356,6 +3603,10 @@ msgstr ""
 msgid "watchdog timeout must be greater than 0"
 msgstr ""
 
+#: shared-bindings/rgbmatrix/RGBMatrix.c
+msgid "width must be greater than zero"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "window must be <= interval"
 msgstr ""