Merge remote-tracking branch 'upstream/main' into esp-tcpserver

1 files changed, 168 insertions, 22 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 65c31ee22..58663ae63 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,6 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-21 14:14-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -20,7 +19,13 @@ msgstr ""
 #: main.c
 msgid ""
 "\n"
-"Code done running. Waiting for reload.\n"
+"Code done running.\n"
+msgstr ""
+
+#: main.c
+msgid ""
+"\n"
+"Code stopped by auto-reload.\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -108,6 +113,11 @@ msgstr ""
 msgid "%q() takes %d positional arguments but %d were given"
 msgstr ""
 
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+#, c-format
+msgid "%s error 0x%x"
+msgstr ""
+
 #: py/argcheck.c
 msgid "'%q' argument required"
 msgstr ""
@@ -270,6 +280,10 @@ msgstr ""
 msgid "3-arg pow() not supported"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "64 bit types"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -530,10 +544,26 @@ msgstr ""
 msgid "CBC blocks must be multiples of 16 bytes"
 msgstr ""
 
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+msgid "CRC or checksum was invalid"
+msgstr ""
+
 #: py/objtype.c
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+msgid "Can only alarm on RTC IO from deep sleep."
+msgstr ""
+
+#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+msgid "Can only alarm on one low pin while others alarm high from deep sleep."
+msgstr ""
+
+#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+msgid "Can only alarm on two low pins from deep sleep."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -566,6 +596,10 @@ msgstr ""
 msgid "Cannot output both channels on the same pin"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+msgid "Cannot pull on input-only pin."
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Cannot read without MISO pin."
 msgstr ""
@@ -609,6 +643,10 @@ msgstr ""
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+msgid "Cannot wake on pin edge. Only level."
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Cannot write without MOSI pin."
 msgstr ""
@@ -940,6 +978,10 @@ msgstr ""
 msgid "Filters too complex"
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr ""
@@ -949,10 +991,6 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -962,6 +1000,10 @@ msgstr ""
 msgid "Function requires lock"
 msgstr ""
 
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+msgid "Generic Failure"
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 #: shared-bindings/displayio/EPaperDisplay.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
@@ -1088,6 +1130,7 @@ msgstr ""
 msgid "Invalid Pin"
 msgstr ""
 
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
 #: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid argument"
 msgstr ""
@@ -1148,6 +1191,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
+#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
 #: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
@@ -1196,10 +1240,18 @@ msgstr ""
 msgid "Invalid security_mode"
 msgstr ""
 
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+msgid "Invalid size"
+msgstr ""
+
 #: ports/esp32s2/common-hal/socketpool/Socket.c
 msgid "Invalid socket for TLS"
 msgstr ""
 
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+msgid "Invalid state"
+msgstr ""
+
 #: ports/esp32s2/common-hal/socketpool/Socket.c
 msgid "Invalid use of TLS Socket"
 msgstr ""
@@ -1220,6 +1272,10 @@ msgstr ""
 msgid "Invalid word/bit length"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Issue setting SO_REUSEADDR"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Key must be 16, 24, or 32 bytes long"
 msgstr ""
@@ -1244,6 +1300,10 @@ msgstr ""
 msgid "Length must be non-negative"
 msgstr ""
 
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+msgid "MAC address was invalid"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr ""
@@ -1470,7 +1530,11 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/esp32s2/common-hal/alarm/__init__.c
+#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
+msgid "Only one TouchAlarm can be set in deep sleep."
+msgstr ""
+
+#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -1482,6 +1546,18 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+msgid "Operation or feature not supported"
+msgstr ""
+
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+msgid "Operation timed out"
+msgstr ""
+
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+msgid "Out of memory"
+msgstr ""
+
 #: ports/esp32s2/common-hal/socketpool/Socket.c
 msgid "Out of sockets"
 msgstr ""
@@ -1490,6 +1566,10 @@ msgstr ""
 msgid "Oversample must be multiple of 8."
 msgstr ""
 
+#: shared-bindings/audiobusio/PDMIn.c
+msgid "PDMIn not available"
+msgstr ""
+
 #: shared-bindings/pwmio/PWMOut.c
 msgid ""
 "PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)"
@@ -1506,6 +1586,10 @@ msgstr ""
 msgid "ParallelBus not yet supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/audiobusio/__init__.c
+msgid "Peripheral in use"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "Permission denied"
 msgstr ""
@@ -1532,10 +1616,6 @@ msgstr ""
 msgid "Pin number already reserved by EXTI"
 msgstr ""
 
-#: ports/esp32s2/common-hal/alarm/__init__.c
-msgid "PinAlarm not yet implemented"
-msgstr ""
-
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid ""
@@ -1576,7 +1656,7 @@ msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 
 #: main.c
-msgid "Pretending to deep sleep until alarm, any key or file write.\n"
+msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
 #: shared-bindings/digitalio/DigitalInOut.c
@@ -1627,6 +1707,10 @@ msgstr ""
 msgid "Read-only object"
 msgstr ""
 
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+msgid "Received response was invalid"
+msgstr ""
+
 #: shared-bindings/displayio/EPaperDisplay.c
 msgid "Refresh too soon"
 msgstr ""
@@ -1639,6 +1723,10 @@ msgstr ""
 msgid "Requested AES mode is unsupported"
 msgstr ""
 
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+msgid "Requested resource not found"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Right channel unsupported"
 msgstr ""
@@ -1995,6 +2083,10 @@ msgstr ""
 msgid "Unsupported pull value."
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -2005,6 +2097,10 @@ msgstr ""
 msgid "Value length > max_length"
 msgstr ""
 
+#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
+msgid "Version was invalid"
+msgstr ""
+
 #: py/emitnative.c
 msgid "Viper functions don't currently support more than 4 arguments"
 msgstr ""
@@ -2407,6 +2503,10 @@ msgstr ""
 msgid "circle can only be registered in one parent"
 msgstr ""
 
+#: shared-bindings/msgpack/ExtType.c
+msgid "code outside range 0~127"
+msgstr ""
+
 #: shared-bindings/displayio/Palette.c
 msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
 msgstr ""
@@ -2479,6 +2579,10 @@ msgstr ""
 msgid "data must be of equal length"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "data type not understood"
+msgstr ""
+
 #: py/parsenum.c
 msgid "decimal numbers not supported"
 msgstr ""
@@ -2487,6 +2591,10 @@ msgstr ""
 msgid "default 'except' must be last"
 msgstr ""
 
+#: shared-bindings/msgpack/__init__.c
+msgid "default is not a function"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid ""
 "destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
@@ -2586,6 +2694,10 @@ msgstr ""
 msgid "expecting key:value for dict"
 msgstr ""
 
+#: shared-bindings/msgpack/__init__.c
+msgid "ext_hook is not a function"
+msgstr ""
+
 #: py/argcheck.c
 msgid "extra keyword arguments given"
 msgstr ""
@@ -2789,7 +2901,7 @@ msgid "input and output shapes are not compatible"
 msgstr ""
 
 #: extmod/ulab/code/ulab_create.c
-msgid "input argument must be an integer or a 2-tuple"
+msgid "input argument must be an integer, a tuple, or a list"
 msgstr ""
 
 #: extmod/ulab/code/fft/fft.c
@@ -3013,7 +3125,7 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr ""
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
 msgstr ""
 
 #: extmod/ulab/code/ndarray.c
@@ -3032,6 +3144,10 @@ msgstr ""
 msgid "maxiter should be > 0"
 msgstr ""
 
+#: extmod/ulab/code/numerical/numerical.c
+msgid "median argument must be an ndarray"
+msgstr ""
+
 #: py/runtime.c
 #, c-format
 msgid "memory allocation failed, allocating %u bytes"
@@ -3114,6 +3230,10 @@ msgstr ""
 msgid "no binding for nonlocal found"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "no default packer"
+msgstr ""
+
 #: py/builtinimport.c
 msgid "no module named '%q'"
 msgstr ""
@@ -3151,6 +3271,14 @@ msgstr ""
 msgid "non-keyword arg after keyword arg"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3223,6 +3351,10 @@ msgstr ""
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr ""
@@ -3250,10 +3382,6 @@ msgid "operation is implemented for 1D Boolean arrays only"
 msgstr ""
 
 #: extmod/ulab/code/numerical/numerical.c
-msgid "operation is not implemented for flattened array"
-msgstr ""
-
-#: extmod/ulab/code/numerical/numerical.c
 msgid "operation is not implemented on ndarrays"
 msgstr ""
 
@@ -3343,6 +3471,8 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -3439,6 +3569,10 @@ msgstr ""
 msgid "shape must be a tuple"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "short read"
+msgstr ""
+
 #: py/objstr.c
 msgid "sign not allowed in string format specifier"
 msgstr ""
@@ -3568,6 +3702,10 @@ msgstr ""
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr ""
@@ -3592,6 +3730,10 @@ msgstr ""
 msgid "too many arguments provided with the given format"
 msgstr ""
 
+#: extmod/ulab/code/ulab_create.c
+msgid "too many dimensions"
+msgstr ""
+
 #: extmod/ulab/code/ndarray.c
 msgid "too many indices"
 msgstr ""
@@ -3602,6 +3744,10 @@ msgid "too many values to unpack (expected %d)"
 msgstr ""
 
 #: extmod/ulab/code/approx/approx.c
+msgid "trapz is defined for 1D arrays"
+msgstr ""
+
+#: extmod/ulab/code/approx/approx.c
 msgid "trapz is defined for 1D arrays of equal length"
 msgstr ""
 
@@ -3609,10 +3755,6 @@ msgstr ""
 msgid "trigger level must be 0 or 1"
 msgstr ""
 
-#: extmod/ulab/code/linalg/linalg.c
-msgid "tuple index out of range"
-msgstr ""
-
 #: py/obj.c
 msgid "tuple/list has wrong length"
 msgstr ""
@@ -3803,6 +3945,10 @@ msgstr ""
 msgid "x value out of bounds"
 msgstr ""
 
+#: ports/esp32s2/common-hal/audiobusio/__init__.c
+msgid "xTaskCreate failed"
+msgstr ""
+
 #: shared-bindings/displayio/Shape.c
 msgid "y should be an int"
 msgstr ""