Merge remote-tracking branch 'upstream/main' into sslsocket

1 files changed, 159 insertions, 8 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index c88a32a05..ba434a9db 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -58,7 +58,8 @@ msgstr ""
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
-msgid "%d address pins and %d rgb pins indicate a height of %d, not %d"
+msgid ""
+"%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
@@ -338,6 +339,10 @@ msgstr ""
 msgid "All event channels in use"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr ""
@@ -386,6 +391,7 @@ msgstr ""
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
@@ -516,7 +522,6 @@ msgstr ""
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr ""
 
-#: shared-bindings/adafruit_bus_device/I2CDevice.c
 #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr ""
@@ -531,6 +536,7 @@ msgid "Buffer too short by %d bytes"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -585,6 +591,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr ""
 
@@ -804,6 +811,10 @@ msgstr ""
 msgid "Data 0 pin must be byte aligned"
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr ""
@@ -862,7 +873,8 @@ msgstr ""
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1044,6 +1056,10 @@ msgstr ""
 msgid "I2C Init Error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr ""
@@ -1067,6 +1083,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr ""
@@ -1079,6 +1099,31 @@ msgstr ""
 msgid "Input/output error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr ""
@@ -1130,7 +1175,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr ""
 
@@ -1224,6 +1269,8 @@ msgstr ""
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -1337,6 +1384,36 @@ msgstr ""
 msgid "Missing MISO or MOSI Pin"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr ""
@@ -1390,14 +1467,14 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr ""
 
@@ -1454,6 +1531,10 @@ msgstr ""
 msgid "No network with that ssid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr ""
@@ -1509,6 +1590,10 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1580,8 +1665,8 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -1594,11 +1679,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr ""
@@ -1659,10 +1753,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr ""
@@ -1745,6 +1863,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
@@ -1766,6 +1885,10 @@ msgstr ""
 msgid "SPI Re-initialization error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr ""
@@ -1796,6 +1919,14 @@ msgstr ""
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr ""
@@ -1960,6 +2091,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -2064,7 +2199,8 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -2115,6 +2251,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr ""
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -3496,6 +3633,7 @@ msgstr ""
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h
@@ -3513,6 +3651,14 @@ msgstr ""
 msgid "pressing both buttons at start up.\n"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr ""
@@ -3706,12 +3852,17 @@ msgstr ""
 msgid "threshold must be in the range 0-65536"
 msgstr ""
 
+#: shared-bindings/rgbmatrix/RGBMatrix.c
+msgid "tile must be greater than zero"
+msgstr ""
+
 #: shared-bindings/time/__init__.c
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""