merge from upstream

17 files changed, 343 insertions, 244 deletions

diff --git a/locale/ID.po b/locale/ID.po
index 782e846e9..6073b6a46 100644
--- a/locale/ID.po
+++ b/locale/ID.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: 2020-10-10 23:51+0000\n"
 "Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -301,6 +301,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Semua perangkat I2C sedang digunakan"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
@@ -337,6 +338,7 @@ msgstr "Semua timer untuk pin ini sedang digunakan"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1107,6 +1109,7 @@ msgid "Invalid byteorder string"
 msgstr "String byteorder tidak valid"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Periode penangkapan tidak valid. Kisaran yang valid: 1 - 500"
 
@@ -1283,6 +1286,10 @@ msgstr "Harus menyediakan pin MISO atau MOSI"
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr "Harus menggunakan kelipatan 6 pin rgb, bukan %d"
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr "Nama terlalu panjang"
@@ -1435,14 +1442,14 @@ msgstr "Parity ganjil tidak didukung"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Hanya 8 atau 16 bit mono dengan "
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 36fd5f647..38deb62d7 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 16:03-0500\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1427,14 +1427,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1448,10 +1448,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/esp32s2/common-hal/alarm/__init__.c
-msgid "Only one alarm.time alarm can be set."
-msgstr ""
-
 #: shared-module/displayio/ColorConverter.c
 msgid "Only one color can be transparent at a time"
 msgstr ""
@@ -1509,10 +1505,6 @@ msgstr ""
 msgid "Pin number already reserved by EXTI"
 msgstr ""
 
-#: ports/esp32s2/common-hal/alarm/__init__.c
-msgid "PinAlarm not yet implemented"
-msgstr ""
-
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid ""
@@ -1574,7 +1566,7 @@ msgstr ""
 msgid "RTC calibration is not supported on this board"
 msgstr ""
 
-#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
+#: shared-bindings/time/__init__.c
 msgid "RTC is not supported on this board"
 msgstr ""
 
@@ -1720,10 +1712,6 @@ msgstr ""
 msgid "Supply at least one UART pin"
 msgstr ""
 
-#: shared-bindings/alarm/time/TimeAlarm.c
-msgid "Supply one of monotonic_time or epoch_time"
-msgstr ""
-
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
 msgstr ""
@@ -1787,10 +1775,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
-#: shared-bindings/alarm/time/TimeAlarm.c
-msgid "Time is in the past."
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 #, c-format
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
@@ -2505,10 +2489,6 @@ msgstr ""
 msgid "end_x should be an int"
 msgstr ""
 
-#: shared-bindings/alarm/time/TimeAlarm.c
-msgid "epoch_time not supported on this board"
-msgstr ""
-
 #: ports/nrf/common-hal/busio/UART.c
 #, c-format
 msgid "error = 0x%08lX"
@@ -2878,10 +2858,6 @@ msgstr ""
 msgid "invalid syntax for number"
 msgstr ""
 
-#: ports/esp32s2/common-hal/alarm/pin/__init__.c
-msgid "io must be rtc io"
-msgstr ""
-
 #: py/objtype.c
 msgid "issubclass() arg 1 must be a class"
 msgstr ""
@@ -3569,10 +3545,6 @@ msgstr ""
 msgid "trapz is defined for 1D arrays of equal length"
 msgstr ""
 
-#: ports/esp32s2/common-hal/alarm/pin/__init__.c
-msgid "trigger level must be 0 or 1"
-msgstr ""
-
 #: extmod/ulab/code/linalg/linalg.c
 msgid "tuple index out of range"
 msgstr ""
@@ -3715,10 +3687,6 @@ msgstr ""
 msgid "vectors must have same lengths"
 msgstr ""
 
-#: ports/esp32s2/common-hal/alarm/pin/__init__.c
-msgid "wakeup conflict"
-msgstr ""
-
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "watchdog not initialized"
 msgstr ""
diff --git a/locale/cs.po b/locale/cs.po
index 6eb69fb67..a77a655a6 100644
--- a/locale/cs.po
+++ b/locale/cs.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: 2020-05-24 03:22+0000\n"
 "Last-Translator: dronecz <mzuzelka@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -301,6 +301,7 @@ msgid "All I2C peripherals are in use"
 msgstr ""
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
@@ -337,6 +338,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1090,6 +1092,7 @@ msgid "Invalid byteorder string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
 
@@ -1266,6 +1269,10 @@ msgstr ""
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr ""
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr ""
@@ -1416,14 +1423,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
diff --git a/locale/de_DE.po b/locale/de_DE.po
index f10333910..7dd79d915 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -5,15 +5,15 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
-"PO-Revision-Date: 2020-06-16 18:24+0000\n"
-"Last-Translator: Andreas Buchen <andreas.buchen@gmail.com>\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
+"PO-Revision-Date: 2020-11-26 03:11+0000\n"
+"Last-Translator: Daniel Bravo Darriba <bravodarriba@gmail.com>\n"
 "Language: de_DE\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.1.1-dev\n"
+"X-Generator: Weblate 4.4-dev\n"
 
 #: main.c
 msgid ""
@@ -57,7 +57,7 @@ msgstr "%d Adress-Pins und %d rgb-Pins zeigen eine Höhe von %d, nicht von %d"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q failure: %d"
-msgstr ""
+msgstr "%q Fehler: %d"
 
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -300,6 +300,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Alle I2C-Peripheriegeräte sind in Benutzung"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
@@ -336,6 +337,7 @@ msgstr "Alle timer für diesen Pin werden bereits benutzt"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1107,6 +1109,7 @@ msgid "Invalid byteorder string"
 msgstr "Ungültige Byteorder String"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Ungültiger Aufnahmezeitraum. Gültiger Bereich: 1 - 500"
 
@@ -1285,6 +1288,10 @@ msgstr "Muss MISO- oder MOSI-Pin bereitstellen"
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr "Muss ein Vielfaches von 6 RGB-Pins verwenden, nicht %d"
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr "Name zu lang"
@@ -1437,14 +1444,14 @@ msgstr "Eine ungerade Parität wird nicht unterstützt"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Nur 8 oder 16 bit mono mit "
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
diff --git a/locale/el.po b/locale/el.po
index 85bf0ab44..8d6dad828 100644
--- a/locale/el.po
+++ b/locale/el.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: Automatically generated\n"
 "Language-Team: none\n"
@@ -296,6 +296,7 @@ msgid "All I2C peripherals are in use"
 msgstr ""
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
@@ -332,6 +333,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1085,6 +1087,7 @@ msgid "Invalid byteorder string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
 
@@ -1261,6 +1264,10 @@ msgstr ""
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr ""
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr ""
@@ -1411,14 +1418,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
diff --git a/locale/es.po b/locale/es.po
index 538a2944e..6b0fde563 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -7,9 +7,9 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
-"PO-Revision-Date: 2020-11-15 16:28+0000\n"
-"Last-Translator: RubenD <rubendariopm14@gmail.com>\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
+"PO-Revision-Date: 2020-11-27 18:34+0000\n"
+"Last-Translator: Iván Montiel Cardona <ivan_montiel2013@hotmail.com>\n"
 "Language-Team: \n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
@@ -304,6 +304,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Todos los periféricos I2C están siendo usados"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr "Todas las unidades PCNT en uso"
@@ -342,6 +343,7 @@ msgstr "Todos los timers para este pin están siendo utilizados"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -437,7 +439,7 @@ msgstr "El periférico no maneja el Baudrate"
 #: shared-module/displayio/Display.c
 #: shared-module/framebufferio/FramebufferDisplay.c
 msgid "Below minimum frame rate"
-msgstr "Por debajo de taza mínima de refrescamiento"
+msgstr "Por debajo de la tasa mínima de refrescamiento"
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Bit clock and word select must share a clock unit"
@@ -498,7 +500,7 @@ msgstr "El buffer es muy pequeño"
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
-msgstr "La longitud del buffer %d es muy grande. Debe ser menor a %d"
+msgstr "Longitud del buffer %d es demasiado grande. Tiene que ser menor a %d"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 #: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
@@ -520,7 +522,7 @@ msgstr "Buffer demasiado grande e incapaz de asignar"
 #: shared-bindings/_bleio/PacketBuffer.c
 #, c-format
 msgid "Buffer too short by %d bytes"
-msgstr "Búfer muy corto por %d bytes"
+msgstr "Búffer muy corto por %d bytes"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
@@ -729,7 +731,7 @@ msgstr "No se puede definir la dirección"
 
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not start PWM"
-msgstr "No se pudo iniciar el PWM"
+msgstr "No se pudo iniciar PWM"
 
 #: ports/stm/common-hal/busio/UART.c
 msgid "Could not start interrupt, RX busy"
@@ -746,7 +748,7 @@ msgstr "No se pudo asignar el primer buffer"
 
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate input buffer"
-msgstr "No se pudo encontrar el búfer de entrada"
+msgstr "No se pudo encontrar el buffer de entrada"
 
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
 #: shared-module/audiomp3/MP3Decoder.c
@@ -876,7 +878,7 @@ msgstr "FFT se define solo para ndarrays"
 
 #: extmod/ulab/code/fft/fft.c
 msgid "FFT is implemented for linear arrays only"
-msgstr ""
+msgstr "FFT solo esta implementado para arrays lineales"
 
 #: ports/esp32s2/common-hal/socketpool/Socket.c
 msgid "Failed SSL handshake"
@@ -936,7 +938,7 @@ msgstr "No se puede liberar el mutex, err 0x%04x"
 
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
-msgstr "Error al escribir al flash interno."
+msgstr "Error al escribir el flash interno."
 
 #: py/moduerrno.c
 msgid "File exists"
@@ -975,7 +977,7 @@ msgstr "La función requiere lock"
 #: shared-bindings/displayio/EPaperDisplay.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Group already used"
-msgstr "El grupo ya está siendo utilizado"
+msgstr "Grupo ya está siendo utilizado"
 
 #: shared-module/displayio/Group.c
 msgid "Group full"
@@ -1001,7 +1003,7 @@ msgstr "Operación I/O en archivo cerrado"
 
 #: ports/stm/common-hal/busio/I2C.c
 msgid "I2C Init Error"
-msgstr "Error de inicio de I2C"
+msgstr "I2C Error de inicio"
 
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
@@ -1026,7 +1028,7 @@ msgstr "Tamaño incorrecto del buffer"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
-msgstr ""
+msgstr "Inicializacion fallida por falta de memoria"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "Input taking too long"
@@ -1108,6 +1110,7 @@ msgid "Invalid byteorder string"
 msgstr "Cadena de byteorder inválida"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Inválido periodo de captura. Rango válido: 1 - 500"
 
@@ -1284,6 +1287,10 @@ msgstr "Debe proporcionar un pin MISO o MOSI"
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr "Debe usar un múltiplo de 6 pines rgb, no %d"
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr "Error NVS"
+
 #: py/parse.c
 msgid "Name too long"
 msgstr "Nombre muy largo"
@@ -1397,7 +1404,7 @@ msgstr "No hay temporizador disponible"
 
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
-msgstr "fallo de aserción de dispositivo Nordic Soft."
+msgstr "Fallo de aserción de dispositivo Nordic Soft."
 
 #: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c
 msgid "Not a valid IP string"
@@ -1436,14 +1443,14 @@ msgstr "Paridad impar no soportada"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Solo mono de 8 ó 16 bit con "
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr "Solo hay capacidad para enchufes IPv4 SOCK_STREAM"
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Solo hay capacidad para direcciones IPv4"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr "Solo se admiten sockets IPv4"
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1493,7 +1500,7 @@ msgstr ""
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
-msgstr "ParallelBus no soportado aún"
+msgstr "ParallelBus todavía no soportado"
 
 #: py/moduerrno.c
 msgid "Permission denied"
@@ -1527,8 +1534,9 @@ msgid ""
 "bytes.  If this cannot be avoided, pass allow_inefficient=True to the "
 "constructor"
 msgstr ""
-"El pinout utiliza %d bytes por elemento, lo que consume más del ideal de %d "
-"bytes. Si esto no se puede evitar, pase allow_inefficient=True al constructor"
+"El pinout utiliza %d bytes por elemento, lo que consume más de los %d bytes "
+"ideales. Si esto no se puede evitar, pase allow_inefficient=True al "
+"constructor"
 
 #: py/builtinhelp.c
 msgid "Plus any modules on the filesystem\n"
@@ -1559,7 +1567,7 @@ msgstr ""
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Prefix buffer must be on the heap"
-msgstr "El búfer de prefijo debe estar en el montículo"
+msgstr "El prefijo del buffer debe estar en el heap"
 
 #: main.c
 msgid "Press any key to enter the REPL. Use CTRL-D to reload."
@@ -1572,7 +1580,7 @@ msgstr "Pull no se usa cuando la dirección es output."
 
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
-msgstr "Error de desinicializado del RNG"
+msgstr "Error de desinicialización de RNG"
 
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG Init Error"
@@ -1581,7 +1589,7 @@ msgstr "Error de inicialización de RNG"
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
-msgstr "Se especifica inversión de RS485 sin estar en modo RS485"
+msgstr "Se especifica inversión de RS485 si no está en modo RS485"
 
 #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
 #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
@@ -1616,7 +1624,7 @@ msgstr "Objeto de solo-lectura"
 
 #: shared-bindings/displayio/EPaperDisplay.c
 msgid "Refresh too soon"
-msgstr "Actualizando demasiado pronto"
+msgstr "Refresco demasiado pronto"
 
 #: shared-bindings/canio/RemoteTransmissionRequest.c
 msgid "RemoteTransmissionRequests limited to 8 bytes"
@@ -1676,7 +1684,7 @@ msgstr "Frecuencia de muestreo demasiado alta. Debe ser menor a %d"
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Scan already in progess. Stop with stop_scan."
-msgstr "Escaneo en progreso. Use stop_scan para detener."
+msgstr "Escaneo en progreso. Usa stop_scan para detener."
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Selected CTS pin not valid"
@@ -1716,7 +1724,7 @@ msgstr "SocketPool solo se puede usar con wifi.radio"
 
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
-msgstr "Los búferes de fuente y destino deben ser del mismo tamaño"
+msgstr "Los buffers de fuente y destino deben ser del mismo tamaño"
 
 #: extmod/modure.c
 msgid "Splitting with sub-captures"
@@ -1747,7 +1755,7 @@ msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
 "Please increase the stack size if you know how, or if not:"
 msgstr ""
-"El montículo de CircuitPython se dañó porque la pila era demasiado pequeña.\n"
+"El heap de CircuitPython se dañó porque la pila era demasiado pequeña.\n"
 "Aumente el tamaño de la pila si sabe cómo, o si no:"
 
 #: supervisor/shared/safe_mode.c
@@ -1755,8 +1763,8 @@ msgid ""
 "The `microcontroller` module was used to boot into safe mode. Press reset to "
 "exit safe mode.\n"
 msgstr ""
-"El módulo de `microcontroller` fue utilizado para bootear en modo seguro. "
-"Presione reset para salir del modo seguro.\n"
+"El módulo de `microcontroller` fue utilizado para arrancar en modo seguro. "
+"Presiona reset para salir del modo seguro.\n"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
@@ -1768,9 +1776,9 @@ msgid ""
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
-"La alimentación de la microntroladora bajó. Asegúrate que tu fuente de "
-"poder\n"
-"pueda suplir suficiente energía para todo el circuito y presione reset "
+"La alimentación del microntrolador cayó. Asegúrate que tu fuente de "
+"alimentación\n"
+"pueda aportar suficiente energía para todo el circuito y presiona reset "
 "(luego de\n"
 "expulsar CIRCUITPY)\n"
 
@@ -1950,7 +1958,7 @@ msgstr "Error de seguridad desconocido: 0x%04x"
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown soft device error: %04x"
-msgstr "Error suave desconocido en dispositivo: %04x"
+msgstr "Error leve desconocido en dispositivo: %04x"
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
@@ -1963,7 +1971,7 @@ msgid ""
 "declined or ignored."
 msgstr ""
 "Problema no especificado. Puede ser que la señal de emparejamiento del otro "
-"dispositivo fue declinada o ignorada."
+"dispositivo fue denegada o ignorada."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
 #: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
@@ -2053,7 +2061,7 @@ msgstr "La clave de WiFi debe ser entre 8 y 63 caracteres"
 
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
-msgstr "Escrituras no admitidas en la característica"
+msgstr "Escrituras no admitidas en Characteristic"
 
 #: supervisor/shared/safe_mode.c
 msgid "You are in safe mode: something unanticipated happened.\n"
@@ -2106,7 +2114,7 @@ msgstr "El argumento para argsort debe ser un ndarray"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "argsort is not implemented for flattened arrays"
-msgstr ""
+msgstr "El argot no está implementado para arrays aplanados"
 
 #: py/runtime.c
 msgid "argument has wrong type"
@@ -2131,7 +2139,7 @@ msgstr "argumentos deben ser ndarrays"
 
 #: extmod/ulab/code/ndarray.c
 msgid "array and index length must be equal"
-msgstr ""
+msgstr "Longitud del array e índice tienen que ser iguales"
 
 #: py/objarray.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
@@ -2139,11 +2147,11 @@ msgstr "array/bytes requeridos en el lado derecho"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "attempt to get (arg)min/(arg)max of empty sequence"
-msgstr ""
+msgstr "Intendo de obteber (arg)min/(arg)max de secuencia vacía"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "attempt to get argmin/argmax of an empty sequence"
-msgstr "se trató de traer argmin/argmax de una secuencia vacía"
+msgstr "intento de obtener argmin/argmax de una secuencia vacía"
 
 #: py/objstr.c
 msgid "attributes not supported yet"
@@ -2151,15 +2159,15 @@ msgstr "atributos aún no soportados"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis is out of bounds"
-msgstr ""
+msgstr "Eje está fuera de sus límites"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis must be None, or an integer"
-msgstr ""
+msgstr "Eje tiene que ser None, o un entero"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis too long"
-msgstr ""
+msgstr "Eje demasiado largo"
 
 #: py/builtinevex.c
 msgid "bad compile mode"
@@ -2369,7 +2377,7 @@ msgstr ""
 
 #: extmod/ulab/code/ndarray_operators.c
 msgid "cannot cast output with casting rule"
-msgstr ""
+msgstr "No se puede realizar cast de la salida sin una regla de cast"
 
 #: py/objtype.c
 msgid "cannot create '%q' instances"
@@ -2405,7 +2413,7 @@ msgstr "El argumento de chr() no esta en el rango(256)"
 
 #: shared-module/vectorio/Circle.c
 msgid "circle can only be registered in one parent"
-msgstr "circle solo puede ser registrado con un pariente"
+msgstr "circulo solo puede ser registrado con un pariente"
 
 #: shared-bindings/displayio/Palette.c
 msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
@@ -2469,7 +2477,7 @@ msgstr "no se pudo determinar la versión de la tarjeta SD"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "cross is defined for 1D arrays of length 3"
-msgstr ""
+msgstr "Cruce está definido para un array 1D de longitud 3"
 
 #: extmod/ulab/code/approx/approx.c
 msgid "data must be iterable"
@@ -2512,7 +2520,7 @@ msgstr "El argumento diff debe ser un ndarray"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "differentiation order out of range"
-msgstr ""
+msgstr "Orden de diferenciación fuera de rango"
 
 #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
 #: shared-bindings/math/__init__.c
@@ -2631,11 +2639,11 @@ msgstr "el primer argumento debe ser una función"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "first argument must be a tuple of ndarrays"
-msgstr ""
+msgstr "Primer argumento tiene que ser una tupla de ndarrays"
 
 #: extmod/ulab/code/ndarray.c
 msgid "first argument must be an iterable"
-msgstr "el primer argumento debe permitir iteración"
+msgstr "el primer argumento debe ser un iterable"
 
 #: extmod/ulab/code/vector/vectorise.c
 msgid "first argument must be an ndarray"
@@ -2655,7 +2663,7 @@ msgstr "el argumento invertido debe ser un ndarray"
 
 #: py/objint.c
 msgid "float too big"
-msgstr "punto flotante muy grande"
+msgstr "punto flotante demasiado grande"
 
 #: shared-bindings/_stage/Text.c
 msgid "font must be 2048 bytes long"
@@ -2688,7 +2696,7 @@ msgstr "la función tiene el mismo signo a extremos del intervalo"
 
 #: extmod/ulab/code/ndarray.c
 msgid "function is defined for ndarrays only"
-msgstr ""
+msgstr "Función solo definida para ndarrays"
 
 #: py/argcheck.c
 #, c-format
@@ -2784,7 +2792,7 @@ msgstr "ensamblador en línea debe ser una función"
 
 #: extmod/ulab/code/ndarray.c
 msgid "input and output shapes are not compatible"
-msgstr ""
+msgstr "Formas de entrada y salida no son compactibles"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input argument must be an integer or a 2-tuple"
@@ -2796,11 +2804,11 @@ msgstr "el tamaño del arreglo de entrada debe ser potencia de 2"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input arrays are not compatible"
-msgstr ""
+msgstr "Arrays de entrada no son compactibles"
 
 #: extmod/ulab/code/poly/poly.c
 msgid "input data must be an iterable"
-msgstr "los datos de entrada deben permitir iteración"
+msgstr "los datos de entrada deben ser iterables"
 
 #: extmod/ulab/code/linalg/linalg.c
 msgid "input matrix is asymmetric"
@@ -2812,19 +2820,19 @@ msgstr "la matriz de entrada es singular"
 
 #: extmod/ulab/code/user/user.c
 msgid "input must be a dense ndarray"
-msgstr ""
+msgstr "Entrada tiene que ser un ndarray denso"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input must be a tensor of rank 2"
-msgstr ""
+msgstr "Entrada tiene que ser un tensor de rango 2"
 
 #: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
 msgid "input must be an ndarray"
-msgstr ""
+msgstr "Entrada tiene que ser un ndarray"
 
 #: extmod/ulab/code/filter/filter.c
 msgid "input must be one-dimensional"
-msgstr ""
+msgstr "Entrada tiene que ser unidimensional"
 
 #: extmod/ulab/code/linalg/linalg.c
 msgid "input must be square matrix"
@@ -2840,7 +2848,7 @@ msgstr "los vectores de entrada deben ser de igual tamaño"
 
 #: extmod/ulab/code/poly/poly.c
 msgid "inputs are not iterable"
-msgstr ""
+msgstr "Entradas no son iterables"
 
 #: py/parsenum.c
 msgid "int() arg 2 must be >= 2 and <= 36"
@@ -2981,7 +2989,7 @@ msgstr "long int no soportado en esta compilación"
 
 #: ports/esp32s2/common-hal/canio/CAN.c
 msgid "loopback + silent mode not supported by peripheral"
-msgstr ""
+msgstr "Loopback + modo silencioso no están soportados por periférico"
 
 #: py/parse.c
 msgid "malformed f-string"
@@ -3015,7 +3023,7 @@ msgstr "max_lenght debe ser > 0"
 
 #: extmod/ulab/code/ndarray.c
 msgid "maximum number of dimensions is 4"
-msgstr ""
+msgstr "Máximo número de dimensiones es 4"
 
 #: py/runtime.c
 msgid "maximum recursion depth exceeded"
@@ -3023,11 +3031,11 @@ msgstr "profundidad máxima de recursión excedida"
 
 #: extmod/ulab/code/approx/approx.c
 msgid "maxiter must be > 0"
-msgstr ""
+msgstr "maxiter tiene que ser > 0"
 
 #: extmod/ulab/code/approx/approx.c
 msgid "maxiter should be > 0"
-msgstr ""
+msgstr "maxiter debe ser > 0"
 
 #: py/runtime.c
 #, c-format
@@ -3152,7 +3160,7 @@ msgstr ""
 
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
-msgstr ""
+msgstr "norma está definida para arrays 1D y 2D"
 
 #: shared-bindings/_bleio/UUID.c
 msgid "not a 128-bit UUID"
@@ -3221,7 +3229,7 @@ msgstr "string de longitud impar"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "offset is too large"
-msgstr ""
+msgstr "offset es demasiado grande"
 
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
@@ -3247,11 +3255,11 @@ msgstr "los operandos no se pueden transmitir juntos"
 
 #: extmod/ulab/code/ndarray.c
 msgid "operation is implemented for 1D Boolean arrays only"
-msgstr ""
+msgstr "operación solo está implementada para arrays booleanos de 1D"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "operation is not implemented for flattened array"
-msgstr ""
+msgstr "operación no está implementada para arrays aplanados"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "operation is not implemented on ndarrays"
@@ -3389,7 +3397,7 @@ msgstr "longitud solicitada %d pero el objeto tiene longitud %d"
 
 #: extmod/ulab/code/ndarray_operators.c
 msgid "results cannot be cast to specified type"
-msgstr ""
+msgstr "resultados no pueden aplicar cast a un tipo específico"
 
 #: py/compile.c
 msgid "return annotation must be an identifier"
@@ -3411,7 +3419,7 @@ msgstr "rgb_pins[%d] no está en el mismo puerto que el reloj"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "roll argument must be an ndarray"
-msgstr ""
+msgstr "Argumento enrolado tiene que ser un ndarray"
 
 #: py/objstr.c
 msgid "rsplit(None,n)"
@@ -3439,7 +3447,7 @@ msgstr "script de compilación no soportado"
 
 #: extmod/ulab/code/ndarray.c
 msgid "shape must be a tuple"
-msgstr ""
+msgstr "forma tiene que ser una tupla"
 
 #: py/objstr.c
 msgid "sign not allowed in string format specifier"
@@ -3589,7 +3597,7 @@ msgstr "timestamp fuera de rango para plataform time_t"
 
 #: extmod/ulab/code/ndarray.c
 msgid "tobytes can be invoked for dense arrays only"
-msgstr ""
+msgstr "tobytes solo pueden ser invocados por arrays densos"
 
 #: shared-module/struct/__init__.c
 msgid "too many arguments provided with the given format"
@@ -3619,12 +3627,12 @@ msgstr "tupla/lista tiene una longitud incorrecta"
 #: ports/esp32s2/common-hal/canio/CAN.c
 #, c-format
 msgid "twai_driver_install returned esp-idf error #%d"
-msgstr ""
+msgstr "twai_driver_install devolvió esp-idf error #%d"
 
 #: ports/esp32s2/common-hal/canio/CAN.c
 #, c-format
 msgid "twai_start returned esp-idf error #%d"
-msgstr ""
+msgstr "twai_start devolvió esp-idf error #%d"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
@@ -3752,7 +3760,7 @@ msgstr "los vectores deben tener el mismo tamaño"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "watchdog not initialized"
-msgstr ""
+msgstr "watchdog no inicializado"
 
 #: shared-bindings/watchdog/WatchDogTimer.c
 msgid "watchdog timeout must be greater than 0"
@@ -3768,11 +3776,11 @@ msgstr "la ventana debe ser <= intervalo"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "wrong axis index"
-msgstr ""
+msgstr "indice de eje erróneo"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "wrong axis specified"
-msgstr ""
+msgstr "eje especificado erróneo"
 
 #: extmod/ulab/code/vector/vectorise.c
 msgid "wrong input type"
@@ -3822,6 +3830,9 @@ msgstr "zi debe ser de tipo flotante"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi debe ser una forma (n_section,2)"
 
+#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
+#~ msgstr "Solo hay capacidad para enchufes IPv4 SOCK_STREAM"
+
 #~ msgid "arctan2 is implemented for scalars and ndarrays only"
 #~ msgstr "arctan2 se encuentra implementado solo para escalares y ndarrays"
 
diff --git a/locale/fil.po b/locale/fil.po
index 86178a9a1..9178623a2 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -298,6 +298,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Lahat ng I2C peripherals ginagamit"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
@@ -335,6 +336,7 @@ msgstr "Lahat ng timers para sa pin na ito ay ginagamit"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1100,6 +1102,7 @@ msgid "Invalid byteorder string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
 
@@ -1276,6 +1279,10 @@ msgstr ""
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr ""
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr ""
@@ -1429,14 +1436,14 @@ msgstr "Odd na parity ay hindi supportado"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Tanging 8 o 16 na bit mono na may "
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
diff --git a/locale/fr.po b/locale/fr.po
index 17e6e905d..bb9b6ea98 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -7,9 +7,9 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
-"PO-Revision-Date: 2020-11-20 22:28+0000\n"
-"Last-Translator: Noel Gaetan <gaetan.noel@viacesi.fr>\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
+"PO-Revision-Date: 2020-11-24 22:45+0000\n"
+"Last-Translator: Antonin ENFRUN <antonin.e@me.com>\n"
 "Language: fr\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=utf-8\n"
@@ -305,6 +305,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Tous les périphériques I2C sont utilisés"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr "Toutes les unités PCNT sont utilisées"
@@ -341,6 +342,7 @@ msgstr "Tous les timers pour cette broche sont utilisés"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -881,7 +883,7 @@ msgstr "La FFT est définie pour les ndarrays uniquement"
 
 #: extmod/ulab/code/fft/fft.c
 msgid "FFT is implemented for linear arrays only"
-msgstr ""
+msgstr "FFT n'est implémenté que pour les tableaux linéaires"
 
 #: ports/esp32s2/common-hal/socketpool/Socket.c
 msgid "Failed SSL handshake"
@@ -1113,6 +1115,7 @@ msgid "Invalid byteorder string"
 msgstr "Chaîne d'octets non valide"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Période de capture invalide. Gamme valide : 1 à 500"
 
@@ -1289,6 +1292,10 @@ msgstr "Doit fournir une broche MISO ou MOSI"
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr "Doit utiliser un multiple de 6 broches RVB, pas %d"
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr "Nom trop long"
@@ -1441,14 +1448,14 @@ msgstr "Parité impaire non supportée"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Uniquement 8 ou 16 bit mono avec "
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr "Seules les sockets IPv4 SOCK_STREAM sont prises en charge"
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Seules les adresses IPv4 sont prises en charge"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -2116,7 +2123,7 @@ msgstr "L'argument argsort doit être un ndarray"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "argsort is not implemented for flattened arrays"
-msgstr ""
+msgstr "argsort n'est pas mis en œuvre pour les tableaux aplatis"
 
 #: py/runtime.c
 msgid "argument has wrong type"
@@ -2141,7 +2148,7 @@ msgstr "les arguments doivent être des ndarrays"
 
 #: extmod/ulab/code/ndarray.c
 msgid "array and index length must be equal"
-msgstr ""
+msgstr "la longueur du tableau et de l'index doit être égale"
 
 #: py/objarray.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
@@ -2149,7 +2156,7 @@ msgstr "tableau/octets requis à droite"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "attempt to get (arg)min/(arg)max of empty sequence"
-msgstr ""
+msgstr "tentative d’obtenir (arg)min/(arg)max d'une séquence vide"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "attempt to get argmin/argmax of an empty sequence"
@@ -2161,15 +2168,15 @@ msgstr "attribut pas encore supporté"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis is out of bounds"
-msgstr ""
+msgstr "axis est hors limites"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis must be None, or an integer"
-msgstr ""
+msgstr "axis doit être None ou un entier"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis too long"
-msgstr ""
+msgstr "axis trop long"
 
 #: py/builtinevex.c
 msgid "bad compile mode"
@@ -2485,7 +2492,7 @@ msgstr "impossible de déterminer la version de la carte SD"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "cross is defined for 1D arrays of length 3"
-msgstr ""
+msgstr "cross est défini pour les tableaux 1D de longueur 3"
 
 #: extmod/ulab/code/approx/approx.c
 msgid "data must be iterable"
@@ -2528,7 +2535,7 @@ msgstr "l'argument diff doit être un ndarray"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "differentiation order out of range"
-msgstr ""
+msgstr "differentiation order hors plage"
 
 #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
 #: shared-bindings/math/__init__.c
@@ -2649,7 +2656,7 @@ msgstr "le premier argument doit être une fonction"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "first argument must be a tuple of ndarrays"
-msgstr ""
+msgstr "le premier argument doit être un tuple de ndarrays"
 
 #: extmod/ulab/code/ndarray.c
 msgid "first argument must be an iterable"
@@ -2706,7 +2713,7 @@ msgstr "la fonction a le même signe aux extrémités de l’intervalle"
 
 #: extmod/ulab/code/ndarray.c
 msgid "function is defined for ndarrays only"
-msgstr ""
+msgstr "La fonction n'est définie que pour les ndarrays"
 
 #: py/argcheck.c
 #, c-format
@@ -2803,7 +2810,7 @@ msgstr "l'assembleur doit être une fonction"
 
 #: extmod/ulab/code/ndarray.c
 msgid "input and output shapes are not compatible"
-msgstr ""
+msgstr "les formes d'entrée et de sortie ne sont pas compatibles"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input argument must be an integer or a 2-tuple"
@@ -2815,7 +2822,7 @@ msgstr "la longueur du tableau d'entrée doit être une puissance de 2"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input arrays are not compatible"
-msgstr ""
+msgstr "les tableaux d'entrée ne sont pas compatibles"
 
 #: extmod/ulab/code/poly/poly.c
 msgid "input data must be an iterable"
@@ -2831,11 +2838,11 @@ msgstr "la matrice d'entrée est singulière"
 
 #: extmod/ulab/code/user/user.c
 msgid "input must be a dense ndarray"
-msgstr ""
+msgstr "l'entrée doit être un tableau dense"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input must be a tensor of rank 2"
-msgstr ""
+msgstr "l'entrée doit être un tenseur de rang 2"
 
 #: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
 msgid "input must be an ndarray"
@@ -3844,6 +3851,9 @@ msgstr "zi doit être de type float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi doit être de forme (n_section, 2)"
 
+#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
+#~ msgstr "Seules les sockets IPv4 SOCK_STREAM sont prises en charge"
+
 #~ msgid "arctan2 is implemented for scalars and ndarrays only"
 #~ msgstr ""
 #~ "arctan2 est implémenté uniquement pour les scalaires et les ndarrays"
diff --git a/locale/hi.po b/locale/hi.po
index 3b006f198..025664069 100644
--- a/locale/hi.po
+++ b/locale/hi.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: Automatically generated\n"
 "Language-Team: none\n"
@@ -296,6 +296,7 @@ msgid "All I2C peripherals are in use"
 msgstr ""
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
@@ -332,6 +333,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1085,6 +1087,7 @@ msgid "Invalid byteorder string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
 
@@ -1261,6 +1264,10 @@ msgstr ""
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr ""
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr ""
@@ -1411,14 +1418,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
diff --git a/locale/it_IT.po b/locale/it_IT.po
index 652bc56fd..bb77d71cc 100644
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -297,6 +297,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Tutte le periferiche I2C sono in uso"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
@@ -334,6 +335,7 @@ msgstr "Tutti i timer per questo pin sono in uso"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1101,6 +1103,7 @@ msgid "Invalid byteorder string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "periodo di cattura invalido. Zona valida: 1 - 500"
 
@@ -1280,6 +1283,10 @@ msgstr ""
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr ""
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr ""
@@ -1434,14 +1441,14 @@ msgstr "operazione I2C non supportata"
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
diff --git a/locale/ja.po b/locale/ja.po
index 26025c19e..bacf0df81 100644
--- a/locale/ja.po
+++ b/locale/ja.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
-"PO-Revision-Date: 2020-11-12 22:51+0000\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
+"PO-Revision-Date: 2020-11-27 18:34+0000\n"
 "Last-Translator: sporeball <sporeballdev@gmail.com>\n"
 "Language-Team: none\n"
 "Language: ja\n"
@@ -182,7 +182,7 @@ msgstr ""
 #: py/emitinlinethumb.c py/emitinlinextensa.c
 #, c-format
 msgid "'%s' expects an integer"
-msgstr ""
+msgstr "'%s' には整数が必要"
 
 #: py/emitinlinethumb.c
 #, c-format
@@ -303,6 +303,7 @@ msgid "All I2C peripherals are in use"
 msgstr "全てのI2C周辺機器が使用中"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
@@ -339,6 +340,7 @@ msgstr "このピン用の全てのタイマが使用中"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1100,6 +1102,7 @@ msgid "Invalid byteorder string"
 msgstr "不正なバイトオーダー文字列"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "不正なキャプチャ周期。有効な周期は1-500"
 
@@ -1276,6 +1279,10 @@ msgstr "MISOピンまたはMOSIピンが必要"
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr "%d個でなく6の倍数個のrgbピンを使ってください"
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr "名前が長すぎます"
@@ -1428,14 +1435,14 @@ msgstr "奇数パリティには対応していません"
 msgid "Only 8 or 16 bit mono with "
 msgstr "8または16ビットの "
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -3750,7 +3757,7 @@ msgstr ""
 
 #: shared-module/displayio/Shape.c
 msgid "x value out of bounds"
-msgstr ""
+msgstr "xが範囲外"
 
 #: shared-bindings/displayio/Shape.c
 msgid "y should be an int"
diff --git a/locale/ko.po b/locale/ko.po
index a7967210d..9e6cbb0c2 100644
--- a/locale/ko.po
+++ b/locale/ko.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: 2020-10-05 12:12+0000\n"
 "Last-Translator: Michal Čihař <michal@cihar.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -299,6 +299,7 @@ msgid "All I2C peripherals are in use"
 msgstr "사용중인 모든 I2C주변 기기"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
@@ -335,6 +336,7 @@ msgstr "핀의 모든 타이머가 사용 중입니다"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1090,6 +1092,7 @@ msgid "Invalid byteorder string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
 
@@ -1266,6 +1269,10 @@ msgstr ""
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr ""
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr ""
@@ -1416,14 +1423,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
diff --git a/locale/nl.po b/locale/nl.po
index f9847fd81..41a3ace76 100644
--- a/locale/nl.po
+++ b/locale/nl.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: 2020-10-27 16:47+0000\n"
 "Last-Translator: Jelle Jager <jell@jjc.id.au>\n"
 "Language-Team: none\n"
@@ -301,6 +301,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Alle I2C peripherals zijn in gebruik"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
@@ -337,6 +338,7 @@ msgstr "Alle timers voor deze pin zijn in gebruik"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1102,6 +1104,7 @@ msgid "Invalid byteorder string"
 msgstr "Ongeldige byteorder string"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Ongeldige vastlegging periode. Geldig bereik: 1 - 500"
 
@@ -1278,6 +1281,10 @@ msgstr "MISO of MOSI moeten worden gegeven"
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr "Een meervoud van 6 rgb pinnen moet worden gebruikt, niet %d"
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr "Naam te lang"
@@ -1430,14 +1437,14 @@ msgstr "Oneven pariteit is niet ondersteund"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Alleen 8 of 16 bit mono met "
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr "Alleen IPv4 SOCK_STREAM sockets worden ondersteund"
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Alleen IPv4 adressen worden ondersteund"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -3810,6 +3817,9 @@ msgstr "zi moet van type float zijn"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi moet vorm (n_section, 2) hebben"
 
+#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
+#~ msgstr "Alleen IPv4 SOCK_STREAM sockets worden ondersteund"
+
 #~ msgid "arctan2 is implemented for scalars and ndarrays only"
 #~ msgstr "arctan2 is alleen geïmplementeerd voor scalars en ndarrays"
 
diff --git a/locale/pl.po b/locale/pl.po
index 1873af488..5fbe727ef 100644
--- a/locale/pl.po
+++ b/locale/pl.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: 2020-11-11 19:13+0000\n"
 "Last-Translator: Maciej Stankiewicz <tawezik@gmail.com>\n"
 "Language-Team: pl\n"
@@ -303,6 +303,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Wszystkie peryferia I2C w użyciu"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
@@ -339,6 +340,7 @@ msgstr "Wszystkie timery tej nóżki w użyciu"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1100,6 +1102,7 @@ msgid "Invalid byteorder string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Zły okres. Poprawny zakres to: 1 - 500"
 
@@ -1277,6 +1280,10 @@ msgstr "Należy podać pin MISO lub MOSI"
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr ""
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr "Za długa nazwa"
@@ -1427,14 +1434,14 @@ msgstr "Nieparzysta parzystość nie jest wspierana"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Tylko 8 lub 16 bitów mono z "
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index baa125f1d..8f899a12c 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -5,8 +5,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
-"PO-Revision-Date: 2020-11-18 00:28+0000\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
+"PO-Revision-Date: 2020-11-24 23:22+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -305,6 +305,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Todos os periféricos I2C estão em uso"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr "Todas as unidades PCNT estão em uso"
@@ -341,6 +342,7 @@ msgstr "Todos os temporizadores para este pino estão em uso"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -878,7 +880,7 @@ msgstr "O FFT é definido apenas para ndarrays"
 
 #: extmod/ulab/code/fft/fft.c
 msgid "FFT is implemented for linear arrays only"
-msgstr ""
+msgstr "O FFT é implementado apenas para matrizes lineares"
 
 #: ports/esp32s2/common-hal/socketpool/Socket.c
 msgid "Failed SSL handshake"
@@ -1111,6 +1113,7 @@ msgid "Invalid byteorder string"
 msgstr "A cadeia de bytes é inválida"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "O período de captura é inválido. O intervalo válido é: 1 - 500"
 
@@ -1287,6 +1290,10 @@ msgstr "Deve informar os pinos MISO ou MOSI"
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr "Deve utilizar um múltiplo de 6 pinos rgb, não %d"
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr "Erro NVS"
+
 #: py/parse.c
 msgid "Name too long"
 msgstr "Nome muito longo"
@@ -1438,14 +1445,14 @@ msgstr "A paridade ímpar não é compatível"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Apenas mono com 8 ou 16 bits com "
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr "São suportados apenas soquetes IPv4 SOCK_STREAM"
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Somente os endereços IPv4 são suportados"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -2114,7 +2121,7 @@ msgstr "O argumento argsort deve ser um ndarray"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "argsort is not implemented for flattened arrays"
-msgstr ""
+msgstr "argsort não é implementado para matrizes achatadas"
 
 #: py/runtime.c
 msgid "argument has wrong type"
@@ -2139,7 +2146,7 @@ msgstr "os argumentos devem ser ndarrays"
 
 #: extmod/ulab/code/ndarray.c
 msgid "array and index length must be equal"
-msgstr ""
+msgstr "a matriz e comprimento do índice devem ser iguais"
 
 #: py/objarray.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
@@ -2147,7 +2154,7 @@ msgstr "matriz/bytes são necessários no lado direito"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "attempt to get (arg)min/(arg)max of empty sequence"
-msgstr ""
+msgstr "tentativa de obter (arg)min/(arg)max da sequência vazia"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "attempt to get argmin/argmax of an empty sequence"
@@ -2159,15 +2166,15 @@ msgstr "atributos ainda não suportados"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis is out of bounds"
-msgstr ""
+msgstr "o eixo está fora dos limites"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis must be None, or an integer"
-msgstr ""
+msgstr "eixo deve ser Nenhum ou um número inteiro"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis too long"
-msgstr ""
+msgstr "o eixo é muito longo"
 
 #: py/builtinevex.c
 msgid "bad compile mode"
@@ -2376,7 +2383,7 @@ msgstr ""
 
 #: extmod/ulab/code/ndarray_operators.c
 msgid "cannot cast output with casting rule"
-msgstr ""
+msgstr "não pode lançar a saída com a regra de fundição"
 
 #: py/objtype.c
 msgid "cannot create '%q' instances"
@@ -2478,7 +2485,7 @@ msgstr "não foi possível determinar a versão do cartão SD"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "cross is defined for 1D arrays of length 3"
-msgstr ""
+msgstr "a cruz é definida para matrizes 1D de comprimento 3"
 
 #: extmod/ulab/code/approx/approx.c
 msgid "data must be iterable"
@@ -2522,7 +2529,7 @@ msgstr "O argumento diff deve ser um ndarray"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "differentiation order out of range"
-msgstr ""
+msgstr "ordem de diferenciação fora do alcance"
 
 #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
 #: shared-bindings/math/__init__.c
@@ -2641,7 +2648,7 @@ msgstr "o primeiro argumento deve ser uma função"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "first argument must be a tuple of ndarrays"
-msgstr ""
+msgstr "o primeiro argumento deve ser um tuple de ndarrays"
 
 #: extmod/ulab/code/ndarray.c
 msgid "first argument must be an iterable"
@@ -2698,7 +2705,7 @@ msgstr "a função tem o mesmo sinal nas extremidades do intervalo"
 
 #: extmod/ulab/code/ndarray.c
 msgid "function is defined for ndarrays only"
-msgstr ""
+msgstr "A função é definida apenas para ndarrays"
 
 #: py/argcheck.c
 #, c-format
@@ -2794,7 +2801,7 @@ msgstr "o assembler em linha deve ser uma função"
 
 #: extmod/ulab/code/ndarray.c
 msgid "input and output shapes are not compatible"
-msgstr ""
+msgstr "as formas de entrada e saída não são compatíveis"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input argument must be an integer or a 2-tuple"
@@ -2806,7 +2813,7 @@ msgstr "comprimento da matriz da entrada deve ter potência de 2"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input arrays are not compatible"
-msgstr ""
+msgstr "as matrizes da entrada não são compatíveis"
 
 #: extmod/ulab/code/poly/poly.c
 msgid "input data must be an iterable"
@@ -2822,19 +2829,19 @@ msgstr "a matriz da entrada é singular"
 
 #: extmod/ulab/code/user/user.c
 msgid "input must be a dense ndarray"
-msgstr ""
+msgstr "a entrada deve ser um ndarray denso"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input must be a tensor of rank 2"
-msgstr ""
+msgstr "a entrada dos dados deve ser um tensor de nível 2"
 
 #: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
 msgid "input must be an ndarray"
-msgstr ""
+msgstr "a entrada deve ser um ndarray"
 
 #: extmod/ulab/code/filter/filter.c
 msgid "input must be one-dimensional"
-msgstr ""
+msgstr "a entrada deve ser unidimensional"
 
 #: extmod/ulab/code/linalg/linalg.c
 msgid "input must be square matrix"
@@ -2850,7 +2857,7 @@ msgstr "os vetores da entrada devem ter o mesmo comprimento"
 
 #: extmod/ulab/code/poly/poly.c
 msgid "inputs are not iterable"
-msgstr ""
+msgstr "as entradas não são iteráveis"
 
 #: py/parsenum.c
 msgid "int() arg 2 must be >= 2 and <= 36"
@@ -3025,7 +3032,7 @@ msgstr "max_length deve ser > 0"
 
 #: extmod/ulab/code/ndarray.c
 msgid "maximum number of dimensions is 4"
-msgstr ""
+msgstr "O número máximo de dimensões são 4"
 
 #: py/runtime.c
 msgid "maximum recursion depth exceeded"
@@ -3162,7 +3169,7 @@ msgstr "um arg não-palavra-chave após a palavra-chave arg"
 
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
-msgstr ""
+msgstr "a norma é definida para matrizes 1D e 2D"
 
 #: shared-bindings/_bleio/UUID.c
 msgid "not a 128-bit UUID"
@@ -3230,7 +3237,7 @@ msgstr "sequência com comprimento ímpar"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "offset is too large"
-msgstr ""
+msgstr "o offset é muito grande"
 
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
@@ -3257,11 +3264,11 @@ msgstr "os operandos não puderam ser transmitidos juntos"
 
 #: extmod/ulab/code/ndarray.c
 msgid "operation is implemented for 1D Boolean arrays only"
-msgstr ""
+msgstr "A operação é implementada apenas para matrizes booleanas 1D"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "operation is not implemented for flattened array"
-msgstr ""
+msgstr "a operação não é implementada para a matriz achatada"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "operation is not implemented on ndarrays"
@@ -3403,7 +3410,7 @@ msgstr "o comprimento solicitado %d, porém o objeto tem comprimento %d"
 
 #: extmod/ulab/code/ndarray_operators.c
 msgid "results cannot be cast to specified type"
-msgstr ""
+msgstr "os resultados não podem ser lançados para um determinado tipo"
 
 #: py/compile.c
 msgid "return annotation must be an identifier"
@@ -3425,7 +3432,7 @@ msgstr "rgb_pins[%d] não está na mesma porta que o clock"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "roll argument must be an ndarray"
-msgstr ""
+msgstr "argumento de enrolar deve ser um ndarray"
 
 #: py/objstr.c
 msgid "rsplit(None,n)"
@@ -3453,7 +3460,7 @@ msgstr "compilação de script não suportada"
 
 #: extmod/ulab/code/ndarray.c
 msgid "shape must be a tuple"
-msgstr ""
+msgstr "a forma deve ser uma tupla"
 
 #: py/objstr.c
 msgid "sign not allowed in string format specifier"
@@ -3602,7 +3609,7 @@ msgstr "timestamp fora do intervalo para a plataforma time_t"
 
 #: extmod/ulab/code/ndarray.c
 msgid "tobytes can be invoked for dense arrays only"
-msgstr ""
+msgstr "os tobytes podem ser invocados apenas nas matrizes densas"
 
 #: shared-module/struct/__init__.c
 msgid "too many arguments provided with the given format"
@@ -3781,11 +3788,11 @@ msgstr "a janela deve ser <= intervalo"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "wrong axis index"
-msgstr ""
+msgstr "índice do eixo errado"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "wrong axis specified"
-msgstr ""
+msgstr "um eixo errado foi definido"
 
 #: extmod/ulab/code/vector/vectorise.c
 msgid "wrong input type"
@@ -3835,6 +3842,9 @@ msgstr "zi deve ser de um tipo float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi deve estar na forma (n_section, 2)"
 
+#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
+#~ msgstr "São suportados apenas soquetes IPv4 SOCK_STREAM"
+
 #~ msgid "arctan2 is implemented for scalars and ndarrays only"
 #~ msgstr "O arctan2 está implementado apenas para escalares e ndarrays"
 
diff --git a/locale/sv.po b/locale/sv.po
index 02847044f..66c1f345a 100644
--- a/locale/sv.po
+++ b/locale/sv.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: 2020-11-20 22:28+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -301,6 +301,7 @@ msgid "All I2C peripherals are in use"
 msgstr "All I2C-kringutrustning används"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr "Alla PCNT-enheter används"
@@ -337,6 +338,7 @@ msgstr "Alla timers för denna pinne är i bruk"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1100,6 +1102,7 @@ msgid "Invalid byteorder string"
 msgstr "Ogiltig byteorder-sträng"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Ogiltig inspelningsperiod. Giltigt intervall: 1 - 500"
 
@@ -1277,6 +1280,10 @@ msgstr "Måste ange MISO- eller MOSI-pinne"
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr "Måste använda ett multipel av 6 rgb-pinnar, inte %d"
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr "Name är för långt"
@@ -1429,14 +1436,14 @@ msgstr "Udda paritet stöds inte"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Endast 8 eller 16 bitars mono med "
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr "Endast IPv4 SOCK_STREAM sockets stöds"
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Endast IPv4-adresser stöds"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -3803,6 +3810,9 @@ msgstr "zi måste vara av typ float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi måste vara i formen (n_section, 2)"
 
+#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
+#~ msgstr "Endast IPv4 SOCK_STREAM sockets stöds"
+
 #~ msgid "arctan2 is implemented for scalars and ndarrays only"
 #~ msgstr "arctan2 är enbart implementerad för scalar och ndarray"
 
diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po
index 134efec90..7a08bc6e8 100644
--- a/locale/zh_Latn_pinyin.po
+++ b/locale/zh_Latn_pinyin.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-23 10:10-0600\n"
+"POT-Creation-Date: 2020-11-24 15:40-0500\n"
 "PO-Revision-Date: 2020-11-19 01:28+0000\n"
 "Last-Translator: hexthat <hexthat@gmail.com>\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@@ -303,6 +303,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng"
 
 #: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr "suǒ yǒu zhèng zài shǐ yòng zhōng de PCNT dān yuán"
@@ -339,6 +340,7 @@ msgstr "Cǐ yǐn jiǎo de suǒyǒu jìshí qì zhèngzài shǐyòng"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -1098,6 +1100,7 @@ msgid "Invalid byteorder string"
 msgstr "Wúxiào de zì jié shùnxù zìfú chuàn"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Wúxiào de bǔhuò zhōuqí. Yǒuxiào fànwéi: 1-500"
 
@@ -1274,6 +1277,10 @@ msgstr "Bìxū tígōng MISO huò MOSI yǐn jiǎo"
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr "bì xū shǐ yòng 6 RGB yǐn jiǎo de bèi shù, ér bù shì %d"
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr "Míngchēng tài zhǎng"
@@ -1425,14 +1432,14 @@ msgstr "Bù zhīchí jīshù"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Zhǐyǒu 8 huò 16 wèi dānwèi "
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr "Jǐn zhīchí IPv4 SOCK_STREAM tào jiē zì"
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Jǐn zhīchí IPv4 dìzhǐ"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -3792,6 +3799,9 @@ msgstr "zi bìxū wèi fú diǎn xíng"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
 
+#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
+#~ msgstr "Jǐn zhīchí IPv4 SOCK_STREAM tào jiē zì"
+
 #~ msgid "arctan2 is implemented for scalars and ndarrays only"
 #~ msgstr "arctan2 jǐn zhēnduì biāoliàng hé ndarray shíxiàn"