nrf: Cleanup mpconfigboard files

All the removed defines were used by legacy modules that are now
removed.

5 files changed, 12 insertions, 172 deletions

diff --git a/ports/nrf/boards/feather52832/mpconfigboard.h b/ports/nrf/boards/feather52832/mpconfigboard.h
index d0da6e398..cfbf22447 100644
--- a/ports/nrf/boards/feather52832/mpconfigboard.h
+++ b/ports/nrf/boards/feather52832/mpconfigboard.h
@@ -25,47 +25,12 @@
  */
 
 #define MICROPY_HW_BOARD_NAME       "Bluefruit nRF52 Feather"
-#define MICROPY_HW_MCU_NAME         "NRF52832"
-#define MICROPY_PY_SYS_PLATFORM     "nrf52"
+#define MICROPY_HW_MCU_NAME         "nRF52832"
+#define MICROPY_PY_SYS_PLATFORM     "nRF52"
 
-#define MICROPY_HW_HAS_LED          (1)
-#define MICROPY_HW_HAS_SWITCH       (0)
-#define MICROPY_HW_HAS_FLASH        (0)
-#define MICROPY_HW_HAS_SDCARD       (0)
-#define MICROPY_HW_HAS_MMA7660      (0)
-#define MICROPY_HW_HAS_LIS3DSH      (0)
-#define MICROPY_HW_HAS_LCD          (0)
-#define MICROPY_HW_ENABLE_RNG       (0)
-#define MICROPY_HW_ENABLE_RTC       (0)
-#define MICROPY_HW_ENABLE_TIMER     (0)
-#define MICROPY_HW_ENABLE_SERVO     (0)
-#define MICROPY_HW_ENABLE_DAC       (0)
-#define MICROPY_HW_ENABLE_CAN       (0)
-
-#define MICROPY_HW_LED_COUNT        (2)
-#define MICROPY_HW_LED_PULLUP       (0)
-
-#define MICROPY_HW_LED1             (17) // LED1
-#define MICROPY_HW_LED2             (19) // LED2
-
-// UART config
 #define MICROPY_HW_UART1_RX         (pin_P0_08)
 #define MICROPY_HW_UART1_TX         (pin_P0_06)
 #define MICROPY_HW_UART1_HWFC       (0)
 
-// SPI0 config
-#define MICROPY_HW_SPI0_NAME        "SPI0"
-#define MICROPY_HW_SPI0_SCK         (pin_P0_12) // (Arduino D13)
-#define MICROPY_HW_SPI0_MOSI        (pin_P0_13) // (Arduino D11)
-#define MICROPY_HW_SPI0_MISO        (pin_P0_14) // (Arduino D12)
-
-#define MICROPY_HW_PWM0_NAME        "PWM0"
-#define MICROPY_HW_PWM1_NAME        "PWM1"
-#define MICROPY_HW_PWM2_NAME        "PWM2"
-
-#define HELP_TEXT_BOARD_LED         "1,2"
-
-
-
-#define PORT_HEAP_SIZE                (32*1024)
+#define PORT_HEAP_SIZE              (32 * 1024)
 #define CIRCUITPY_AUTORELOAD_DELAY_MS 500
diff --git a/ports/nrf/boards/feather52840/mpconfigboard.h b/ports/nrf/boards/feather52840/mpconfigboard.h
index 252906fca..aff9177d0 100644
--- a/ports/nrf/boards/feather52840/mpconfigboard.h
+++ b/ports/nrf/boards/feather52840/mpconfigboard.h
@@ -27,53 +27,14 @@
 #define FEATHER52840
 
 #define MICROPY_HW_BOARD_NAME       "Feather52840"
-#define MICROPY_HW_MCU_NAME         "NRF52840"
-#define MICROPY_PY_SYS_PLATFORM     "nrf52840-PDK"
+#define MICROPY_HW_MCU_NAME         "nRF52840"
+#define MICROPY_PY_SYS_PLATFORM     "nRF52840-PDK"
 
-#define MICROPY_HW_HAS_LED          (1)
-#define MICROPY_HW_HAS_SWITCH       (0)
-#define MICROPY_HW_HAS_FLASH        (0)
-#define MICROPY_HW_HAS_SDCARD       (0)
-#define MICROPY_HW_HAS_MMA7660      (0)
-#define MICROPY_HW_HAS_LIS3DSH      (0)
-#define MICROPY_HW_HAS_LCD          (0)
-#define MICROPY_HW_ENABLE_RNG       (0)
-#define MICROPY_HW_ENABLE_RTC       (0)
-#define MICROPY_HW_ENABLE_TIMER     (0)
-#define MICROPY_HW_ENABLE_SERVO     (0)
-#define MICROPY_HW_ENABLE_DAC       (0)
-#define MICROPY_HW_ENABLE_CAN       (0)
-
-#define MICROPY_HW_LED_COUNT        (4)
-#define MICROPY_HW_LED_PULLUP       (1)
-
-#define MICROPY_HW_LED1             (13) // LED1
-#define MICROPY_HW_LED2             (14) // LED2
-#define MICROPY_HW_LED3             (15) // LED3
-#define MICROPY_HW_LED4             (16) // LED4
-
-// UART config
 #define MICROPY_HW_UART1_RX         (pin_P0_08)
 #define MICROPY_HW_UART1_TX         (pin_P0_06)
 #define MICROPY_HW_UART1_CTS        (pin_P0_07)
 #define MICROPY_HW_UART1_RTS        (pin_P0_05)
 #define MICROPY_HW_UART1_HWFC       (1)
 
-// SPI0 config
-#define MICROPY_HW_SPI0_NAME        "SPI0"
-
-#define MICROPY_HW_SPI0_SCK         (pin_P1_15)
-#define MICROPY_HW_SPI0_MOSI        (pin_P1_13)
-#define MICROPY_HW_SPI0_MISO        (pin_P1_14)
-
-#define MICROPY_HW_PWM0_NAME        "PWM0"
-#define MICROPY_HW_PWM1_NAME        "PWM1"
-#define MICROPY_HW_PWM2_NAME        "PWM2"
-#if 0
-#define MICROPY_HW_PWM3_NAME        "PWM3"
-#endif
-
-#define HELP_TEXT_BOARD_LED         "1,2,3,4"
-
-#define PORT_HEAP_SIZE                (128*1024)
+#define PORT_HEAP_SIZE              (128 * 1024)
 #define CIRCUITPY_AUTORELOAD_DELAY_MS 500
diff --git a/ports/nrf/boards/pca10040/mpconfigboard.h b/ports/nrf/boards/pca10040/mpconfigboard.h
index ea8000ca5..f618a39ea 100644
--- a/ports/nrf/boards/pca10040/mpconfigboard.h
+++ b/ports/nrf/boards/pca10040/mpconfigboard.h
@@ -24,52 +24,15 @@
  * THE SOFTWARE.
  */
 
-#define PCA10040
-
 #define MICROPY_HW_BOARD_NAME       "PCA10040"
-#define MICROPY_HW_MCU_NAME         "NRF52832"
-#define MICROPY_PY_SYS_PLATFORM     "nrf52-DK"
-
-#define MICROPY_HW_HAS_LED          (1)
-#define MICROPY_HW_HAS_SWITCH       (0)
-#define MICROPY_HW_HAS_FLASH        (0)
-#define MICROPY_HW_HAS_SDCARD       (0)
-#define MICROPY_HW_HAS_MMA7660      (0)
-#define MICROPY_HW_HAS_LIS3DSH      (0)
-#define MICROPY_HW_HAS_LCD          (0)
-#define MICROPY_HW_ENABLE_RNG       (0)
-#define MICROPY_HW_ENABLE_RTC       (0)
-#define MICROPY_HW_ENABLE_TIMER     (0)
-#define MICROPY_HW_ENABLE_SERVO     (0)
-#define MICROPY_HW_ENABLE_DAC       (0)
-#define MICROPY_HW_ENABLE_CAN       (0)
-
-#define MICROPY_HW_LED_COUNT        (4)
-#define MICROPY_HW_LED_PULLUP       (1)
-
-#define MICROPY_HW_LED1             (17) // LED1
-#define MICROPY_HW_LED2             (18) // LED2
-#define MICROPY_HW_LED3             (19) // LED3
-#define MICROPY_HW_LED4             (20) // LED4
+#define MICROPY_HW_MCU_NAME         "nRF52832"
+#define MICROPY_PY_SYS_PLATFORM     "nRF52-DK"
 
-// UART config
 #define MICROPY_HW_UART1_RX         (pin_P0_08)
 #define MICROPY_HW_UART1_TX         (pin_P0_06)
 #define MICROPY_HW_UART1_CTS        (pin_P0_07)
 #define MICROPY_HW_UART1_RTS        (pin_P0_05)
 #define MICROPY_HW_UART1_HWFC       (1)
 
-// SPI0 config
-#define MICROPY_HW_SPI0_NAME        "SPI0"
-#define MICROPY_HW_SPI0_SCK         (pin_P0_25) // (Arduino D13)
-#define MICROPY_HW_SPI0_MOSI        (pin_P0_23) // (Arduino D11)
-#define MICROPY_HW_SPI0_MISO        (pin_P0_24) // (Arduino D12)
-
-#define MICROPY_HW_PWM0_NAME        "PWM0"
-#define MICROPY_HW_PWM1_NAME        "PWM1"
-#define MICROPY_HW_PWM2_NAME        "PWM2"
-
-#define HELP_TEXT_BOARD_LED         "1,2,3,4"
-
-#define PORT_HEAP_SIZE                (32*1024)
+#define PORT_HEAP_SIZE              (32 * 1024)
 #define CIRCUITPY_AUTORELOAD_DELAY_MS 500
diff --git a/ports/nrf/boards/pca10056/mpconfigboard.h b/ports/nrf/boards/pca10056/mpconfigboard.h
index 2be1156d0..427857247 100644
--- a/ports/nrf/boards/pca10056/mpconfigboard.h
+++ b/ports/nrf/boards/pca10056/mpconfigboard.h
@@ -24,56 +24,15 @@
  * THE SOFTWARE.
  */
 
-#define PCA10056
-
 #define MICROPY_HW_BOARD_NAME       "PCA10056"
-#define MICROPY_HW_MCU_NAME         "NRF52840"
-#define MICROPY_PY_SYS_PLATFORM     "nrf52840-PDK"
-
-#define MICROPY_HW_HAS_LED          (1)
-#define MICROPY_HW_HAS_SWITCH       (0)
-#define MICROPY_HW_HAS_FLASH        (0)
-#define MICROPY_HW_HAS_SDCARD       (0)
-#define MICROPY_HW_HAS_MMA7660      (0)
-#define MICROPY_HW_HAS_LIS3DSH      (0)
-#define MICROPY_HW_HAS_LCD          (0)
-#define MICROPY_HW_ENABLE_RNG       (0)
-#define MICROPY_HW_ENABLE_RTC       (0)
-#define MICROPY_HW_ENABLE_TIMER     (0)
-#define MICROPY_HW_ENABLE_SERVO     (0)
-#define MICROPY_HW_ENABLE_DAC       (0)
-#define MICROPY_HW_ENABLE_CAN       (0)
-
-#define MICROPY_HW_LED_COUNT        (4)
-#define MICROPY_HW_LED_PULLUP       (1)
-
-#define MICROPY_HW_LED1             (13) // LED1
-#define MICROPY_HW_LED2             (14) // LED2
-#define MICROPY_HW_LED3             (15) // LED3
-#define MICROPY_HW_LED4             (16) // LED4
+#define MICROPY_HW_MCU_NAME         "nRF52840"
+#define MICROPY_PY_SYS_PLATFORM     "nRF52840-PDK"
 
-// UART config
 #define MICROPY_HW_UART1_RX         (pin_P0_08)
 #define MICROPY_HW_UART1_TX         (pin_P0_06)
 #define MICROPY_HW_UART1_CTS        (pin_P0_07)
 #define MICROPY_HW_UART1_RTS        (pin_P0_05)
 #define MICROPY_HW_UART1_HWFC       (1)
 
-// SPI0 config
-#define MICROPY_HW_SPI0_NAME        "SPI0"
-
-#define MICROPY_HW_SPI0_SCK         (pin_P1_15)
-#define MICROPY_HW_SPI0_MOSI        (pin_P1_13)
-#define MICROPY_HW_SPI0_MISO        (pin_P1_14)
-
-#define MICROPY_HW_PWM0_NAME        "PWM0"
-#define MICROPY_HW_PWM1_NAME        "PWM1"
-#define MICROPY_HW_PWM2_NAME        "PWM2"
-#if 0
-#define MICROPY_HW_PWM3_NAME        "PWM3"
-#endif
-
-#define HELP_TEXT_BOARD_LED         "1,2,3,4"
-
-#define PORT_HEAP_SIZE                (128*1024)
+#define PORT_HEAP_SIZE              (128 * 1024)
 #define CIRCUITPY_AUTORELOAD_DELAY_MS 500
diff --git a/ports/nrf/mpconfigport.h b/ports/nrf/mpconfigport.h
index f8e717ccc..05f64bb4f 100644
--- a/ports/nrf/mpconfigport.h
+++ b/ports/nrf/mpconfigport.h
@@ -126,14 +126,6 @@
 
 #define MICROPY_KBD_EXCEPTION                    (1)
 
-#ifndef MICROPY_HW_LED_COUNT
-#define MICROPY_HW_LED_COUNT                     (0)
-#endif
-
-#ifndef MICROPY_HW_LED_PULLUP
-#define MICROPY_HW_LED_PULLUP                    (0)
-#endif
-
 #ifndef MICROPY_PY_HW_RNG
 #define MICROPY_PY_HW_RNG                        (1)
 #endif