diff options
| author | Scott Shawcroft <scott@adafruit.com> | 2020-10-09 13:48:58 -0700 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-10-09 13:48:58 -0700 |
| commit | 699f19f44a7b8ed5b5b678001fb94f5491459c76 (patch) | |
| tree | 35a0af4bbb4c67363fca2a69a528484af3cf37c5 /ports | |
| parent | e1a80aeb03c6ce4ccbdee531c303d419d3d75bb6 (diff) | |
| parent | ef42d6bb6caaab8599fe0ac6211eca444ca109f1 (diff) | |
Merge pull request #3522 from tannewt/imx_metro
Unify iMX RT flash config and add Metro M7 1011
Diffstat (limited to 'ports')
21 files changed, 1317 insertions, 931 deletions
diff --git a/ports/mimxrt10xx/Makefile b/ports/mimxrt10xx/Makefile index 248798f63..12c9bde4f 100644 --- a/ports/mimxrt10xx/Makefile +++ b/ports/mimxrt10xx/Makefile @@ -75,7 +75,7 @@ INC += \ # NDEBUG disables assert() statements. This reduces code size pretty dramatically, per tannewt. -CFLAGS += -Os -DNDEBUG +CFLAGS += -Os -DNDEBUG -ffreestanding # TinyUSB defines CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX -DCFG_TUD_MIDI_RX_BUFSIZE=512 -DCFG_TUD_CDC_RX_BUFSIZE=512 -DCFG_TUD_MIDI_TX_BUFSIZE=512 -DCFG_TUD_CDC_TX_BUFSIZE=512 -DCFG_TUD_MSC_BUFSIZE=1024 diff --git a/ports/mimxrt10xx/boards/board.h b/ports/mimxrt10xx/boards/board.h index 92d02d900..678c223ae 100644 --- a/ports/mimxrt10xx/boards/board.h +++ b/ports/mimxrt10xx/boards/board.h @@ -33,6 +33,7 @@ #include "py/mpconfig.h" #include "fsl_common.h" +#include "fsl_flexspi_nor_config.h" // Initializes board related state once on start up. void board_init(void); @@ -45,4 +46,11 @@ bool board_requests_safe_mode(void); // Reset the state of off MCU components such as neopixels. void reset_board(void); +#define SEQUENCE(first, second, third, fourth) first, second, third, fourth +#define TWO_EMPTY_STEPS 0x00000000 +#define EMPTY_SEQUENCE SEQUENCE(TWO_EMPTY_STEPS, TWO_EMPTY_STEPS, TWO_EMPTY_STEPS, TWO_EMPTY_STEPS) + +// FlexSPI configuration that stores command info. +extern const flexspi_nor_config_t qspiflash_config; + #endif // MICROPY_INCLUDED_MIMXRT10XX_BOARDS_BOARD_H diff --git a/ports/mimxrt10xx/boards/feather_m7_1011/flash_config.c b/ports/mimxrt10xx/boards/feather_m7_1011/flash_config.c index b74c0b151..282464c75 100644 --- a/ports/mimxrt10xx/boards/feather_m7_1011/flash_config.c +++ b/ports/mimxrt10xx/boards/feather_m7_1011/flash_config.c @@ -6,7 +6,7 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" __attribute__((section(".boot_hdr.ivt"))) @@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for W25Q32JV with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x02, // Bit pattern for setting Quad Enable. .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_133MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status -2 + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x31 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01 /* number of bytes to write */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/feather_mimxrt1011/flash_config.c b/ports/mimxrt10xx/boards/feather_mimxrt1011/flash_config.c index b74c0b151..51cc0f164 100644 --- a/ports/mimxrt10xx/boards/feather_mimxrt1011/flash_config.c +++ b/ports/mimxrt10xx/boards/feather_mimxrt1011/flash_config.c @@ -6,7 +6,7 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" __attribute__((section(".boot_hdr.ivt"))) @@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for W25Q64JV with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x02, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_133MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x31 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/feather_mimxrt1062/flash_config.c b/ports/mimxrt10xx/boards/feather_mimxrt1062/flash_config.c index b74c0b151..51cc0f164 100644 --- a/ports/mimxrt10xx/boards/feather_mimxrt1062/flash_config.c +++ b/ports/mimxrt10xx/boards/feather_mimxrt1062/flash_config.c @@ -6,7 +6,7 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" __attribute__((section(".boot_hdr.ivt"))) @@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for W25Q64JV with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x02, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_133MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x31 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/imxrt1010_evk/flash_config.c b/ports/mimxrt10xx/boards/imxrt1010_evk/flash_config.c index 7e8fb75b2..19573bd99 100644 --- a/ports/mimxrt10xx/boards/imxrt1010_evk/flash_config.c +++ b/ports/mimxrt10xx/boards/imxrt1010_evk/flash_config.c @@ -6,7 +6,8 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" + __attribute__((section(".boot_hdr.ivt"))) /************************************* @@ -34,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for AT25SF128A with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x02, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_60MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x31 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/imxrt1020_evk/flash_config.c b/ports/mimxrt10xx/boards/imxrt1020_evk/flash_config.c index 43ffe0dd1..40b566618 100644 --- a/ports/mimxrt10xx/boards/imxrt1020_evk/flash_config.c +++ b/ports/mimxrt10xx/boards/imxrt1020_evk/flash_config.c @@ -6,7 +6,7 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" __attribute__((section(".boot_hdr.ivt"))) @@ -35,92 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for IS25LP064A with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, -#ifdef BOARD_USING_SECONDARY_QSPI_PINMUX - .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromInternally, -#else .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, -#endif - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x40, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_30MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + // SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + // RADDR_SDR, FLEXSPI_4PAD, 24 bits to transmit ), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + // READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/imxrt1060_evk/flash_config.c b/ports/mimxrt10xx/boards/imxrt1060_evk/flash_config.c index 7e046d494..d79a8d0f9 100644 --- a/ports/mimxrt10xx/boards/imxrt1060_evk/flash_config.c +++ b/ports/mimxrt10xx/boards/imxrt1060_evk/flash_config.c @@ -6,10 +6,10 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" -__attribute__((section(".boot_hdr.ivt"))) +__attribute__((section(".boot_hdr.ivt"))) /************************************* * IVT Data *************************************/ @@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for IS25WP064A with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x40, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_60MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/metro_m7_1011/board.c b/ports/mimxrt10xx/boards/metro_m7_1011/board.c new file mode 100644 index 000000000..ed543e1b0 --- /dev/null +++ b/ports/mimxrt10xx/boards/metro_m7_1011/board.c @@ -0,0 +1,52 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries + * Copyright (c) 2019 Artur Pacholec + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" +#include "shared-bindings/microcontroller/Pin.h" + +void board_init(void) { + // SWD Pins + common_hal_never_reset_pin(&pin_GPIO_AD_13);//SWDIO + common_hal_never_reset_pin(&pin_GPIO_AD_12);//SWCLK + + // FLEX flash + common_hal_never_reset_pin(&pin_GPIO_SD_12); + common_hal_never_reset_pin(&pin_GPIO_SD_11); + common_hal_never_reset_pin(&pin_GPIO_SD_10); + common_hal_never_reset_pin(&pin_GPIO_SD_09); + common_hal_never_reset_pin(&pin_GPIO_SD_08); + common_hal_never_reset_pin(&pin_GPIO_SD_07); + common_hal_never_reset_pin(&pin_GPIO_SD_06); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/mimxrt10xx/boards/metro_m7_1011/flash_config.c b/ports/mimxrt10xx/boards/metro_m7_1011/flash_config.c new file mode 100644 index 000000000..30ce67523 --- /dev/null +++ b/ports/mimxrt10xx/boards/metro_m7_1011/flash_config.c @@ -0,0 +1,179 @@ +/* + * Copyright 2017 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "fsl_flexspi_nor_boot.h" +#include "boards/board.h" + + +__attribute__((section(".boot_hdr.ivt"))) +/************************************* + * IVT Data + *************************************/ +const ivt image_vector_table = { + IVT_HEADER, /* IVT Header */ + IMAGE_ENTRY_ADDRESS, /* Image Entry Function */ + IVT_RSVD, /* Reserved = 0 */ + (uint32_t)DCD_ADDRESS, /* Address where DCD information is stored */ + (uint32_t)BOOT_DATA_ADDRESS, /* Address where BOOT Data Structure is stored */ + (uint32_t)&image_vector_table, /* Pointer to IVT Self (absolute address */ + (uint32_t)CSF_ADDRESS, /* Address where CSF file is stored */ + IVT_RSVD /* Reserved = 0 */ +}; + +__attribute__((section(".boot_hdr.boot_data"))) +/************************************* + * Boot Data + *************************************/ +const BOOT_DATA_T boot_data = { + FLASH_BASE, /* boot start location */ + FLASH_SIZE, /* size */ + PLUGIN_FLAG, /* Plugin flag*/ + 0xFFFFFFFF /* empty - extra data word */ +}; + +// Config for W25Q16JV with QSPI routed. +__attribute__((section(".boot_hdr.conf"))) +const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x0200, + .configCmdEnable = 1u, + .configModeType[0] = kDeviceConfigCmdType_Generic, + .configCmdSeqs[0] = { + .seqId = 2u, + .seqNum = 1u, + }, + .deviceType = kFlexSpiDeviceType_SerialNOR, + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_60MHz, + .sflashA1Size = FLASH_SIZE, + .lookupTable = + { + // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35 /* the command to send */, + DUMMY_SDR, FLEXSPI_1PAD, 8), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE + }, + }, +}; diff --git a/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.h b/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.h new file mode 100644 index 000000000..b11edb18b --- /dev/null +++ b/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.h @@ -0,0 +1,20 @@ +#define MICROPY_HW_BOARD_NAME "Metro MIMXRT1011" +#define MICROPY_HW_MCU_NAME "IMXRT1011DAE5A" + +#define MICROPY_HW_NEOPIXEL (&pin_GPIO_00) + +// If you change this, then make sure to update the linker scripts as well to +// make sure you don't overwrite code +#define CIRCUITPY_INTERNAL_NVM_SIZE 0 + +#define BOARD_FLASH_SIZE (2 * 1024 * 1024) + +#define DEFAULT_I2C_BUS_SCL (&pin_GPIO_02) +#define DEFAULT_I2C_BUS_SDA (&pin_GPIO_01) + +#define DEFAULT_SPI_BUS_SCK (&pin_GPIO_AD_06) +#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO_AD_04) +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO_AD_03) + +#define DEFAULT_UART_BUS_RX (&pin_GPIO_09) +#define DEFAULT_UART_BUS_TX (&pin_GPIO_10) diff --git a/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.mk b/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.mk new file mode 100644 index 000000000..1a3f7e766 --- /dev/null +++ b/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.mk @@ -0,0 +1,12 @@ +USB_VID = 0x239A +USB_PID = 0x80E2 +USB_PRODUCT = "Metro M7 1011" +USB_MANUFACTURER = "Adafruit" + +CHIP_VARIANT = MIMXRT1011DAE5A +CHIP_FAMILY = MIMXRT1011 +FLASH = W25Q16JV + +# Include these Python libraries in the firmware +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_ESP32SPI +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Requests diff --git a/ports/mimxrt10xx/boards/metro_m7_1011/pins.c b/ports/mimxrt10xx/boards/metro_m7_1011/pins.c new file mode 100644 index 000000000..e88493413 --- /dev/null +++ b/ports/mimxrt10xx/boards/metro_m7_1011/pins.c @@ -0,0 +1,59 @@ +#include "shared-bindings/board/__init__.h" + +#include "boards/board.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + // Analog + { MP_OBJ_NEW_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO_AD_02) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO_AD_01) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO_AD_00) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO_AD_05) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO_AD_10) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO_AD_08) }, + + // Digital + { MP_OBJ_NEW_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO_09) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO_09) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO_10) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO_10) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO_13) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO_12) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO_SD_00) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO_SD_01) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO_SD_02) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO_11) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO_08) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO_07) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO_06) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO_05) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO_04) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D13),MP_ROM_PTR(&pin_GPIO_03) }, + + // ESP control + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_CS), MP_ROM_PTR(&pin_GPIO_AD_14) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_GPIO0), MP_ROM_PTR(&pin_GPIO_SD_05) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_BUSY), MP_ROM_PTR(&pin_GPIO_AD_11) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RESET), MP_ROM_PTR(&pin_GPIO_AD_07) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_TX), MP_ROM_PTR(&pin_GPIO_09) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RX), MP_ROM_PTR(&pin_GPIO_10) }, + + // SPI + { MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO_AD_06) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO_AD_03) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO_AD_04) }, + + // UART + { MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO_10) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO_09) }, + + // I2C + { MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO_01) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO_02) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO_00) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/mimxrt10xx/boards/teensy40/flash_config.c b/ports/mimxrt10xx/boards/teensy40/flash_config.c index 426deb884..30ce67523 100644 --- a/ports/mimxrt10xx/boards/teensy40/flash_config.c +++ b/ports/mimxrt10xx/boards/teensy40/flash_config.c @@ -6,12 +6,8 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_device" -#endif __attribute__((section(".boot_hdr.ivt"))) /************************************* @@ -39,88 +35,145 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for W25Q16JV with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x0200, + .configCmdEnable = 1u, + .configModeType[0] = kDeviceConfigCmdType_Generic, + .configCmdSeqs[0] = { + .seqId = 2u, + .seqNum = 1u, + }, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_60MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35 /* the command to send */, + DUMMY_SDR, FLEXSPI_1PAD, 8), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/teensy41/flash_config.c b/ports/mimxrt10xx/boards/teensy41/flash_config.c index 426deb884..7b2bfb768 100644 --- a/ports/mimxrt10xx/boards/teensy41/flash_config.c +++ b/ports/mimxrt10xx/boards/teensy41/flash_config.c @@ -6,12 +6,8 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_device" -#endif __attribute__((section(".boot_hdr.ivt"))) /************************************* @@ -39,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for W25Q64JV with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x02, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_60MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x31 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/linking/common.ld b/ports/mimxrt10xx/linking/common.ld index 90fc78093..720361aa0 100644 --- a/ports/mimxrt10xx/linking/common.ld +++ b/ports/mimxrt10xx/linking/common.ld @@ -62,7 +62,6 @@ SECTIONS KEEP(*(.isr_vector)) /* Startup code */ *(EXCLUDE_FILE( - *flexspi_nor_flash_ops.o *fsl_flexspi.o ) .text*) /* .text* sections (code) */ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ @@ -84,7 +83,6 @@ SECTIONS { . = ALIGN(4); *(.data*) /* .data* sections */ - *flexspi_nor_flash_ops.o(.text*) *fsl_flexspi.o(.text*) . = ALIGN(4); } > OCRAM AT> FLASH_FIRMWARE @@ -110,7 +108,6 @@ SECTIONS .itcm : { . = ALIGN(4); - *(.itcm.*) . = ALIGN(4); diff --git a/ports/mimxrt10xx/supervisor/flexspi_nor_flash_ops.c b/ports/mimxrt10xx/supervisor/flexspi_nor_flash_ops.c index 28d5115ac..353ba3176 100644 --- a/ports/mimxrt10xx/supervisor/flexspi_nor_flash_ops.c +++ b/ports/mimxrt10xx/supervisor/flexspi_nor_flash_ops.c @@ -9,23 +9,10 @@ #include "fsl_flexspi.h" #include "internal_flash.h" +#include "boards/board.h" +#include "supervisor/linker.h" -#define FLASH_QUAD_ENABLE 0x02 -#define FLASH_BUSY_STATUS_POL 1 -#define FLASH_BUSY_STATUS_OFFSET 0 - -static inline void flexspi_clock_init(void) -{ - /* Switch to PLL2 for XIP to avoid hardfault during re-initialize clock. */ - CLOCK_InitSysPfd(kCLOCK_Pfd2, 24); /* Set PLL2 PFD2 clock 396MHZ. */ - CLOCK_SetMux(kCLOCK_FlexspiMux, 0x2); /* Choose PLL2 PFD2 clock as flexspi source clock. */ - CLOCK_SetDiv(kCLOCK_FlexspiDiv, 2); /* flexspi clock 133M. */ -} - -extern flexspi_device_config_t deviceconfig; -extern const uint32_t customLUT[CUSTOM_LUT_LENGTH]; - -status_t flexspi_nor_write_enable(FLEXSPI_Type *base, uint32_t baseAddr) +status_t PLACE_IN_ITCM(flexspi_nor_write_enable)(FLEXSPI_Type *base, uint32_t baseAddr) { flexspi_transfer_t flashXfer; status_t status; @@ -35,14 +22,14 @@ status_t flexspi_nor_write_enable(FLEXSPI_Type *base, uint32_t baseAddr) flashXfer.port = kFLEXSPI_PortA1; flashXfer.cmdType = kFLEXSPI_Command; flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_WRITEENABLE; + flashXfer.seqIndex = ROM_INDEX_WRITEENABLE; status = FLEXSPI_TransferBlocking(base, &flashXfer); return status; } -status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) +status_t PLACE_IN_ITCM(flexspi_nor_wait_bus_busy)(FLEXSPI_Type *base) { /* Wait status ready. */ bool isBusy; @@ -54,7 +41,7 @@ status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) flashXfer.port = kFLEXSPI_PortA1; flashXfer.cmdType = kFLEXSPI_Read; flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_READSTATUSREG; + flashXfer.seqIndex = ROM_INDEX_READSTATUSREG; flashXfer.data = &readValue; flashXfer.dataSize = 1; @@ -66,72 +53,15 @@ status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) { return status; } - if (FLASH_BUSY_STATUS_POL) - { - if (readValue & (1U << FLASH_BUSY_STATUS_OFFSET)) - { - isBusy = true; - } - else - { - isBusy = false; - } - } - else - { - if (readValue & (1U << FLASH_BUSY_STATUS_OFFSET)) - { - isBusy = false; - } - else - { - isBusy = true; - } - } - + size_t busyBit = readValue & (1U << qspiflash_config.memConfig.busyOffset); + isBusy = (qspiflash_config.memConfig.busyBitPolarity == 0 && busyBit != 0) || + (qspiflash_config.memConfig.busyBitPolarity == 1 && busyBit == 0); } while (isBusy); return status; } -status_t flexspi_nor_enable_quad_mode(FLEXSPI_Type *base) -{ - flexspi_transfer_t flashXfer; - status_t status; - uint32_t writeValue = FLASH_QUAD_ENABLE; - - /* Write enable */ - status = flexspi_nor_write_enable(base, 0); - - if (status != kStatus_Success) - { - return status; - } - - /* Enable quad mode. */ - flashXfer.deviceAddress = 0; - flashXfer.port = kFLEXSPI_PortA1; - flashXfer.cmdType = kFLEXSPI_Write; - flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG; - flashXfer.data = &writeValue; - flashXfer.dataSize = 1; - - status = FLEXSPI_TransferBlocking(base, &flashXfer); - if (status != kStatus_Success) - { - return status; - } - - status = flexspi_nor_wait_bus_busy(base); - - /* Do software reset. */ - FLEXSPI_SoftwareReset(base); - - return status; -} - -status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) +status_t PLACE_IN_ITCM(flexspi_nor_flash_erase_sector)(FLEXSPI_Type *base, uint32_t address) { status_t status; flexspi_transfer_t flashXfer; @@ -141,7 +71,7 @@ status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) flashXfer.port = kFLEXSPI_PortA1; flashXfer.cmdType = kFLEXSPI_Command; flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_WRITEENABLE; + flashXfer.seqIndex = ROM_INDEX_WRITEENABLE; status = FLEXSPI_TransferBlocking(base, &flashXfer); @@ -154,7 +84,7 @@ status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) flashXfer.port = kFLEXSPI_PortA1; flashXfer.cmdType = kFLEXSPI_Command; flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_ERASESECTOR; + flashXfer.seqIndex = ROM_INDEX_ERASESECTOR; status = FLEXSPI_TransferBlocking(base, &flashXfer); if (status != kStatus_Success) @@ -170,7 +100,7 @@ status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) return status; } -status_t flexspi_nor_flash_program(FLEXSPI_Type *base, uint32_t dstAddr, const uint32_t *src, uint32_t length) +status_t PLACE_IN_ITCM(flexspi_nor_flash_page_program)(FLEXSPI_Type *base, uint32_t dstAddr, const uint32_t *src) { status_t status; flexspi_transfer_t flashXfer; @@ -188,48 +118,7 @@ status_t flexspi_nor_flash_program(FLEXSPI_Type *base, uint32_t dstAddr, const u flashXfer.port = kFLEXSPI_PortA1; flashXfer.cmdType = kFLEXSPI_Write; flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD; - flashXfer.data = (uint32_t *)src; - flashXfer.dataSize = length; - status = FLEXSPI_TransferBlocking(base, &flashXfer); - - if (status != kStatus_Success) - { - return status; - } - - status = flexspi_nor_wait_bus_busy(base); - - /* Do software reset. */ -#if defined(FSL_FEATURE_SOC_OTFAD_COUNT) - base->AHBCR |= FLEXSPI_AHBCR_CLRAHBRXBUF_MASK | FLEXSPI_AHBCR_CLRAHBTXBUF_MASK; - base->AHBCR &= ~(FLEXSPI_AHBCR_CLRAHBRXBUF_MASK | FLEXSPI_AHBCR_CLRAHBTXBUF_MASK); -#else - FLEXSPI_SoftwareReset(base); -#endif - - return status; -} - -status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t dstAddr, const uint32_t *src) -{ - status_t status; - flexspi_transfer_t flashXfer; - - /* Write enable */ - status = flexspi_nor_write_enable(base, dstAddr); - - if (status != kStatus_Success) - { - return status; - } - - /* Prepare page program command */ - flashXfer.deviceAddress = dstAddr; - flashXfer.port = kFLEXSPI_PortA1; - flashXfer.cmdType = kFLEXSPI_Write; - flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD; + flashXfer.seqIndex = ROM_INDEX_PAGEPROGRAM; flashXfer.data = (uint32_t *)src; flashXfer.dataSize = FLASH_PAGE_SIZE; status = FLEXSPI_TransferBlocking(base, &flashXfer); @@ -251,92 +140,3 @@ status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t dstAddr, co return status; } - -status_t flexspi_nor_get_vendor_id(FLEXSPI_Type *base, uint8_t *vendorId) -{ - uint32_t temp; - flexspi_transfer_t flashXfer; - flashXfer.deviceAddress = 0; - flashXfer.port = kFLEXSPI_PortA1; - flashXfer.cmdType = kFLEXSPI_Read; - flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_READID; - flashXfer.data = &temp; - flashXfer.dataSize = 1; - - status_t status = FLEXSPI_TransferBlocking(base, &flashXfer); - - *vendorId = temp; - - /* Do software reset. */ -#if defined(FSL_FEATURE_SOC_OTFAD_COUNT) - base->AHBCR |= FLEXSPI_AHBCR_CLRAHBRXBUF_MASK | FLEXSPI_AHBCR_CLRAHBTXBUF_MASK; - base->AHBCR &= ~(FLEXSPI_AHBCR_CLRAHBRXBUF_MASK | FLEXSPI_AHBCR_CLRAHBTXBUF_MASK); -#else - FLEXSPI_SoftwareReset(base); -#endif - - return status; -} - -status_t flexspi_nor_erase_chip(FLEXSPI_Type *base) -{ - status_t status; - flexspi_transfer_t flashXfer; - - /* Write enable */ - status = flexspi_nor_write_enable(base, 0); - - if (status != kStatus_Success) - { - return status; - } - - flashXfer.deviceAddress = 0; - flashXfer.port = kFLEXSPI_PortA1; - flashXfer.cmdType = kFLEXSPI_Command; - flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_ERASECHIP; - - status = FLEXSPI_TransferBlocking(base, &flashXfer); - - if (status != kStatus_Success) - { - return status; - } - - status = flexspi_nor_wait_bus_busy(base); - - return status; -} - -void flexspi_nor_flash_init(FLEXSPI_Type *base) -{ - flexspi_config_t config; - - flexspi_clock_init(); - - /*Get FLEXSPI default settings and configure the flexspi. */ - FLEXSPI_GetDefaultConfig(&config); - - /*Set AHB buffer size for reading data through AHB bus. */ - config.ahbConfig.enableAHBPrefetch = true; - config.ahbConfig.enableAHBBufferable = true; - config.ahbConfig.enableReadAddressOpt = true; - config.ahbConfig.enableAHBCachable = true; -#ifdef BOARD_USING_SECONDARY_QSPI_PINMUX - config.rxSampleClock = kFLEXSPI_ReadSampleClkLoopbackInternally; -#else - config.rxSampleClock = kFLEXSPI_ReadSampleClkLoopbackFromDqsPad; -#endif - FLEXSPI_Init(base, &config); - - /* Configure flash settings according to serial flash feature. */ - FLEXSPI_SetFlashConfig(base, &deviceconfig, kFLEXSPI_PortA1); - - /* Update LUT table. */ - FLEXSPI_UpdateLUT(base, 0, customLUT, CUSTOM_LUT_LENGTH); - - /* Do software reset. */ - FLEXSPI_SoftwareReset(base); -} diff --git a/ports/mimxrt10xx/supervisor/internal_flash.c b/ports/mimxrt10xx/supervisor/internal_flash.c index 09f44cced..e194cbed9 100644 --- a/ports/mimxrt10xx/supervisor/internal_flash.c +++ b/ports/mimxrt10xx/supervisor/internal_flash.c @@ -30,6 +30,7 @@ #include <string.h> #include <stdio.h> +#include "boards/board.h" #include "extmod/vfs.h" #include "extmod/vfs_fat.h" #include "py/mphal.h" @@ -50,125 +51,14 @@ extern uint32_t __fatfs_flash_length[]; uint8_t _flash_cache[SECTOR_SIZE] __attribute__((aligned(4))); uint32_t _flash_page_addr = NO_CACHE; -static bool init_done = false; - -flexspi_device_config_t deviceconfig = { - .flexspiRootClk = 133000000, - .flashSize = (BOARD_FLASH_SIZE / 1024), - .CSIntervalUnit = kFLEXSPI_CsIntervalUnit1SckCycle, - .CSInterval = 2, - .CSHoldTime = 3, - .CSSetupTime = 3, - .dataValidTime = 0, - .columnspace = 0, - .enableWordAddress = 0, - .AWRSeqIndex = 0, - .AWRSeqNumber = 0, - .ARDSeqIndex = NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD, - .ARDSeqNumber = 1, - .AHBWriteWaitUnit = kFLEXSPI_AhbWriteWaitUnit2AhbCycle, - .AHBWriteWaitInterval = 0, -}; - -const uint32_t customLUT[CUSTOM_LUT_LENGTH] = { - /* Normal read mode -SDR */ - /* Normal read mode -SDR */ - [4 * NOR_CMD_LUT_SEQ_IDX_READ_NORMAL] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x03, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18), - [4 * NOR_CMD_LUT_SEQ_IDX_READ_NORMAL + 1] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0), - - /* Fast read mode - SDR */ - [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x0B, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18), - [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST + 1] = FLEXSPI_LUT_SEQ( - kFLEXSPI_Command_DUMMY_SDR, kFLEXSPI_1PAD, 0x08, kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04), - - /* Fast read quad mode - SDR */ - [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0xEB, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_4PAD, 0x18), - [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD + 1] = FLEXSPI_LUT_SEQ( - kFLEXSPI_Command_DUMMY_SDR, kFLEXSPI_4PAD, 0x06, kFLEXSPI_Command_READ_SDR, kFLEXSPI_4PAD, 0x04), - - /* Read extend parameters */ - [4 * NOR_CMD_LUT_SEQ_IDX_READSTATUS] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x81, kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04), - - /* Write Enable */ - [4 * NOR_CMD_LUT_SEQ_IDX_WRITEENABLE] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x06, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0), - - /* Erase Sector */ - [4 * NOR_CMD_LUT_SEQ_IDX_ERASESECTOR] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x20, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18), - - /* Page Program - single mode */ - [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_SINGLE] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x02, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18), - [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_SINGLE + 1] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_WRITE_SDR, kFLEXSPI_1PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0), - - /* Page Program - quad mode */ - [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x32, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18), - [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD + 1] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_WRITE_SDR, kFLEXSPI_4PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0), - - /* Read ID */ - [4 * NOR_CMD_LUT_SEQ_IDX_READID] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x9F, kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04), - - /* Enable Quad mode */ - [4 * NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x31, kFLEXSPI_Command_WRITE_SDR, kFLEXSPI_1PAD, 0x04), - - /* Read status register */ - [4 * NOR_CMD_LUT_SEQ_IDX_READSTATUSREG] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x05, kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04), - - /* Erase whole chip */ - [4 * NOR_CMD_LUT_SEQ_IDX_ERASECHIP] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0xC7, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0), -}; extern status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address); extern status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t dstAddr, const uint32_t *src); -extern status_t flexspi_nor_get_vendor_id(FLEXSPI_Type *base, uint8_t *vendorId); extern status_t flexspi_nor_enable_quad_mode(FLEXSPI_Type *base); -extern status_t flexspi_nor_erase_chip(FLEXSPI_Type *base); -extern void flexspi_nor_flash_init(FLEXSPI_Type *base); - -void supervisor_flash_init(void) { - if (init_done) - return; - - SCB_DisableDCache(); - - status_t status; - uint8_t vendorID = 0; - - flexspi_nor_flash_init(FLEXSPI); - - /* Get vendor ID. */ - status = flexspi_nor_get_vendor_id(FLEXSPI, &vendorID); - if (status != kStatus_Success) { - printf("flexspi_nor_get_vendor_id fail %ld\r\n", status); - return; - } - - /* Enter quad mode. */ - __disable_irq(); - status = flexspi_nor_enable_quad_mode(FLEXSPI); - if (status != kStatus_Success) - { - printf("flexspi_nor_enable_quad_mode fail %ld\r\n", status); - return; - } - __enable_irq(); - - SCB_EnableDCache(); - init_done = true; +void PLACE_IN_ITCM(supervisor_flash_init)(void) { + // Update the LUT to make sure all entries are available. + FLEXSPI_UpdateLUT(FLEXSPI, 0, (const uint32_t*) &qspiflash_config.memConfig.lookupTable, 64); } static inline uint32_t lba2addr(uint32_t block) { @@ -183,7 +73,7 @@ uint32_t supervisor_flash_get_block_count(void) { return CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE / FILESYSTEM_BLOCK_SIZE; } -void port_internal_flash_flush(void) { +void PLACE_IN_ITCM(port_internal_flash_flush)(void) { if (_flash_page_addr == NO_CACHE) return; status_t status; @@ -211,6 +101,7 @@ void port_internal_flash_flush(void) { DCACHE_CleanInvalidateByRange(_flash_page_addr, SECTOR_SIZE); } + _flash_page_addr = NO_CACHE; } mp_uint_t supervisor_flash_read_blocks(uint8_t *dest, uint32_t block, uint32_t num_blocks) { diff --git a/ports/mimxrt10xx/supervisor/internal_flash.h b/ports/mimxrt10xx/supervisor/internal_flash.h index daee66620..ae33fd134 100644 --- a/ports/mimxrt10xx/supervisor/internal_flash.h +++ b/ports/mimxrt10xx/supervisor/internal_flash.h @@ -34,20 +34,11 @@ #define INTERNAL_FLASH_SYSTICK_MASK (0x1ff) // 512ms #define INTERNAL_FLASH_IDLE_TICK(tick) (((tick) & INTERNAL_FLASH_SYSTICK_MASK) == 2) -#define CUSTOM_LUT_LENGTH 60 #define FLASH_PAGE_SIZE 256 -#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 7 -#define NOR_CMD_LUT_SEQ_IDX_READ_FAST 13 -#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 0 -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS 1 -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 2 -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 3 -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_SINGLE 6 -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 4 -#define NOR_CMD_LUT_SEQ_IDX_READID 8 -#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 9 -#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 12 -#define NOR_CMD_LUT_SEQ_IDX_ERASECHIP 5 +#define ROM_INDEX_WRITEENABLE 3 +#define ROM_INDEX_ERASESECTOR 5 +#define ROM_INDEX_PAGEPROGRAM 9 +#define ROM_INDEX_READSTATUSREG 1 #endif // MICROPY_INCLUDED_MIMXRT10XX_INTERNAL_FLASH_H diff --git a/ports/mimxrt10xx/supervisor/port.c b/ports/mimxrt10xx/supervisor/port.c index 38cf16a49..e3fef373f 100644 --- a/ports/mimxrt10xx/supervisor/port.c +++ b/ports/mimxrt10xx/supervisor/port.c @@ -72,7 +72,8 @@ #define NO_EXECUTION 1 #define EXECUTION 0 -// Shareable if the memory system manages coherency. +// Shareable if the memory system manages coherency. This means shared between memory bus masters, +// not just CPUs. #define NOT_SHAREABLE 0 #define SHAREABLE 1 @@ -207,9 +208,11 @@ __attribute__((used, naked)) void Reset_Handler(void) { MPU->RBAR = ARM_MPU_RBAR(13, 0x20000000U); MPU->RASR = ARM_MPU_RASR(EXECUTION, ARM_MPU_AP_FULL, NORMAL, NOT_SHAREABLE, CACHEABLE, BUFFERABLE, NO_SUBREGIONS, ARM_MPU_REGION_SIZE_32KB); - // This is OCRAM. + // This is OCRAM. We mark it as shareable so that it isn't cached. This makes USB work at the + // cost of 1/4 speed OCRAM accesses. It will leave more room for caching data from the flash + // too which might be a net win. MPU->RBAR = ARM_MPU_RBAR(14, 0x20200000U); - MPU->RASR = ARM_MPU_RASR(EXECUTION, ARM_MPU_AP_FULL, NORMAL, NOT_SHAREABLE, CACHEABLE, BUFFERABLE, NO_SUBREGIONS, ARM_MPU_REGION_SIZE_512KB); + MPU->RASR = ARM_MPU_RASR(EXECUTION, ARM_MPU_AP_FULL, NORMAL, SHAREABLE, CACHEABLE, BUFFERABLE, NO_SUBREGIONS, ARM_MPU_REGION_SIZE_512KB); // We steal 64k from FlexRAM for ITCM and DTCM so disable those memory regions here. MPU->RBAR = ARM_MPU_RBAR(15, 0x20280000U); @@ -322,19 +325,22 @@ void reset_cpu(void) { reset(); } -supervisor_allocation* port_fixed_stack(void) { - return NULL; -} - extern uint32_t _ld_heap_start, _ld_heap_end, _ld_stack_top, _ld_stack_bottom; uint32_t *port_stack_get_limit(void) { - return &_ld_heap_start; + return &_ld_stack_bottom; } uint32_t *port_stack_get_top(void) { return &_ld_stack_top; } +supervisor_allocation _fixed_stack; +supervisor_allocation* port_fixed_stack(void) { + _fixed_stack.ptr = port_stack_get_limit(); + _fixed_stack.length = (port_stack_get_top() - port_stack_get_limit()) * sizeof(uint32_t); + return &_fixed_stack; +} + uint32_t *port_heap_get_bottom(void) { return &_ld_heap_start; } diff --git a/ports/mimxrt10xx/supervisor/usb.c b/ports/mimxrt10xx/supervisor/usb.c index af259405a..91135289c 100644 --- a/ports/mimxrt10xx/supervisor/usb.c +++ b/ports/mimxrt10xx/supervisor/usb.c @@ -50,10 +50,6 @@ void init_usb_hardware(void) { phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); usb_phy->TX = phytx; - - // Temporarily disable the data cache until we can sort out all of the spots in TinyUSB that - // need the cache invalidated or cleaned. - SCB_DisableDCache(); } void USB_OTG1_IRQHandler(void) { |