diff options
133 files changed, 1755 insertions, 549 deletions
diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index ceb691a15..e780f652a 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -408,8 +408,11 @@ jobs: fail-fast: false matrix: board: + - "electroniccats_bastwifi" + - "espressif_kaluga_1" - "espressif_saola_1_wroom" - "espressif_saola_1_wrover" + - "microdev_micro_s2" - "unexpectedmaker_feathers2" steps: @@ -42,6 +42,9 @@ master_doc = 'docs/index' # Grab the JSON values to use while building the module support matrix # in 'shared-bindings/index.rst' +# The stubs must be built before we calculate the shared bindings matrix +subprocess.check_output(["make", "stubs"]) + #modules_support_matrix = shared_bindings_matrix.support_matrix_excluded_boards() modules_support_matrix = shared_bindings_matrix.support_matrix_by_board() @@ -77,7 +80,6 @@ source_suffix = { '.md': 'markdown', } -subprocess.check_output(["make", "stubs"]) extensions.append('autoapi.extension') autoapi_type = 'python' diff --git a/docs/porting.rst b/docs/porting.rst index db4ae7626..6cd59fefb 100644 --- a/docs/porting.rst +++ b/docs/porting.rst @@ -51,10 +51,15 @@ as a natural "TODO" list. An example minimal build list is shown below: .. code-block:: makefile # These modules are implemented in ports/<port>/common-hal: - CIRCUITPY_MICROCONTROLLER = 0 # Typically the first module to create - CIRCUITPY_DIGITALIO = 0 # Typically the second module to create + + # Typically the first module to create + CIRCUITPY_MICROCONTROLLER = 0 + # Typically the second module to create + CIRCUITPY_DIGITALIO = 0 + # Other modules: CIRCUITPY_ANALOGIO = 0 CIRCUITPY_BUSIO = 0 + CIRCUITPY_COUNTIO = 0 CIRCUITPY_NEOPIXEL_WRITE = 0 CIRCUITPY_PULSEIO = 0 CIRCUITPY_OS = 0 @@ -63,22 +68,34 @@ as a natural "TODO" list. An example minimal build list is shown below: CIRCUITPY_AUDIOIO = 0 CIRCUITPY_ROTARYIO = 0 CIRCUITPY_RTC = 0 + CIRCUITPY_SDCARDIO = 0 + CIRCUITPY_FRAMEBUFFERIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_I2CPERIPHERAL = 0 - CIRCUITPY_DISPLAYIO = 0 # Requires SPI, PulseIO (stub ok) + # Requires SPI, PulseIO (stub ok): + CIRCUITPY_DISPLAYIO = 0 # These modules are implemented in shared-module/ - they can be included in # any port once their prerequisites in common-hal are complete. - CIRCUITPY_BITBANGIO = 0 # Requires DigitalIO - CIRCUITPY_GAMEPAD = 0 # Requires DigitalIO - CIRCUITPY_PIXELBUF = 0 # Requires neopixel_write or SPI (dotstar) - CIRCUITPY_RANDOM = 0 # Requires OS - CIRCUITPY_STORAGE = 0 # Requires OS, filesystem - CIRCUITPY_TOUCHIO = 0 # Requires Microcontroller - CIRCUITPY_USB_HID = 0 # Requires USB - CIRCUITPY_USB_MIDI = 0 # Requires USB - CIRCUITPY_REQUIRE_I2C_PULLUPS = 0 # Does nothing without I2C - CIRCUITPY_ULAB = 0 # No requirements, but takes extra flash + # Requires DigitalIO: + CIRCUITPY_BITBANGIO = 0 + # Requires DigitalIO + CIRCUITPY_GAMEPAD = 0 + # Requires neopixel_write or SPI (dotstar) + CIRCUITPY_PIXELBUF = 0 + # Requires OS + CIRCUITPY_RANDOM = 0 + # Requires OS, filesystem + CIRCUITPY_STORAGE = 0 + # Requires Microcontroller + CIRCUITPY_TOUCHIO = 0 + # Requires USB + CIRCUITPY_USB_HID = 0 + CIRCUITPY_USB_MIDI = 0 + # Does nothing without I2C + CIRCUITPY_REQUIRE_I2C_PULLUPS = 0 + # No requirements, but takes extra flash + CIRCUITPY_ULAB = 0 Step 2: Init -------------- diff --git a/docs/shared_bindings_matrix.py b/docs/shared_bindings_matrix.py index 7b96c14f2..e81ae188c 100644 --- a/docs/shared_bindings_matrix.py +++ b/docs/shared_bindings_matrix.py @@ -28,6 +28,7 @@ import re import subprocess import sys +from concurrent.futures import ThreadPoolExecutor SUPPORTED_PORTS = ['atmel-samd', 'esp32s2', 'litex', 'mimxrt10xx', 'nrf', 'stm'] @@ -42,7 +43,7 @@ def get_circuitpython_root_dir(): def get_shared_bindings(): """ Get a list of modules in shared-bindings based on folder names """ - shared_bindings_dir = get_circuitpython_root_dir() / "shared-bindings" + shared_bindings_dir = get_circuitpython_root_dir() / "circuitpython-stubs" return [item.name for item in shared_bindings_dir.iterdir()] @@ -131,38 +132,44 @@ def lookup_setting(settings, key, default=''): key = value[2:-1] return value +def all_ports_all_boards(ports=SUPPORTED_PORTS): + for port in ports: + + port_dir = get_circuitpython_root_dir() / "ports" / port + for entry in (port_dir / "boards").iterdir(): + if not entry.is_dir(): + continue + yield (port, entry) + def support_matrix_by_board(use_branded_name=True): """ Compiles a list of the available core modules available for each board. """ base = build_module_map() - boards = dict() - for port in SUPPORTED_PORTS: - + def support_matrix(arg): + port, entry = arg port_dir = get_circuitpython_root_dir() / "ports" / port - for entry in (port_dir / "boards").iterdir(): - if not entry.is_dir(): - continue - board_modules = [] - board_name = entry.name - - settings = get_settings_from_makefile(str(port_dir), entry.name) - - if use_branded_name: - with open(entry / "mpconfigboard.h") as get_name: - board_contents = get_name.read() - board_name_re = re.search(r"(?<=MICROPY_HW_BOARD_NAME)\s+(.+)", - board_contents) - if board_name_re: - board_name = board_name_re.group(1).strip('"') - - board_modules = [] - for module in base: - key = f'CIRCUITPY_{module.upper()}' - if int(lookup_setting(settings, key, '0')): - board_modules.append(base[module]['name']) - boards[board_name] = sorted(board_modules) + settings = get_settings_from_makefile(str(port_dir), entry.name) + + if use_branded_name: + with open(entry / "mpconfigboard.h") as get_name: + board_contents = get_name.read() + board_name_re = re.search(r"(?<=MICROPY_HW_BOARD_NAME)\s+(.+)", + board_contents) + if board_name_re: + board_name = board_name_re.group(1).strip('"') + + board_modules = [] + for module in base: + key = f'CIRCUITPY_{module.upper()}' + if int(lookup_setting(settings, key, '0')): + board_modules.append(base[module]['name']) + + return (board_name, sorted(board_modules)) + + executor = ThreadPoolExecutor(max_workers=os.cpu_count()) + boards = dict(sorted(executor.map(support_matrix, all_ports_all_boards()))) #print(json.dumps(boards, indent=2)) return boards diff --git a/lib/utils/pyexec.c b/lib/utils/pyexec.c index 8e99bc209..378fb6267 100755 --- a/lib/utils/pyexec.c +++ b/lib/utils/pyexec.c @@ -113,6 +113,8 @@ STATIC int parse_compile_execute(const void *source, mp_parse_input_kind_t input start = mp_hal_ticks_ms(); mp_call_function_0(module_fun); mp_hal_set_interrupt_char(-1); // disable interrupt + // Handle any ctrl-c interrupt that arrived just in time + mp_handle_pending(); nlr_pop(); ret = 0; if (exec_flags & EXEC_FLAG_PRINT_EOF) { diff --git a/locale/ID.po b/locale/ID.po index b553c6749..ec5b6f6e8 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-07-06 18:10+0000\n" "Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -764,7 +764,7 @@ msgstr "Error pada regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Diharapkan %q" @@ -1352,6 +1352,15 @@ msgstr "Tambahkan module apapun pada filesystem\n" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1366,6 +1375,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 92e9b6d24..aeea5f5e9 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:34-0400\n" +"POT-Creation-Date: 2020-08-30 14:38-0400\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -302,7 +302,7 @@ msgstr "" msgid "All sync event channels in use" msgstr "" -#: shared-bindings/pulseio/PWMOut.c +#: shared-bindings/pwmio/PWMOut.c msgid "All timers for this pin are in use" msgstr "" @@ -314,7 +314,7 @@ msgstr "" #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c -#: ports/stm/peripherals/timers.c shared-bindings/pulseio/PWMOut.c +#: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c msgid "All timers in use" msgstr "" @@ -556,7 +556,7 @@ msgstr "" msgid "Cannot unambiguously get sizeof scalar" msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "Cannot vary frequency on a timer that is already in use" msgstr "" @@ -625,23 +625,23 @@ msgstr "" msgid "Could not initialize UART" msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not re-init channel" msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not re-init timer" msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not restart PWM" msgstr "" @@ -649,7 +649,7 @@ msgstr "" msgid "Could not set address" msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not start PWM" msgstr "" @@ -848,7 +848,7 @@ msgstr "" msgid "Frequency captured is above capability. Capture Paused." msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "Frequency must match existing PWMOut using this timer" msgstr "" @@ -950,9 +950,9 @@ msgstr "" msgid "Invalid DAC pin supplied" msgstr "" -#: ports/atmel-samd/common-hal/pulseio/PWMOut.c -#: ports/cxd56/common-hal/pulseio/PWMOut.c -#: ports/nrf/common-hal/pulseio/PWMOut.c shared-bindings/pulseio/PWMOut.c +#: ports/atmel-samd/common-hal/pwmio/PWMOut.c +#: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c +#: shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" @@ -992,7 +992,7 @@ msgstr "" msgid "Invalid format chunk size" msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "" @@ -1010,8 +1010,8 @@ msgid "Invalid phase" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c -#: shared-bindings/pulseio/PWMOut.c shared-module/rgbmatrix/RGBMatrix.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "" @@ -1035,7 +1035,7 @@ msgstr "" msgid "Invalid pins" msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid pins for PWMOut" msgstr "" @@ -1217,7 +1217,7 @@ msgstr "" msgid "No long integer support" msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "" @@ -1289,12 +1289,12 @@ msgstr "" msgid "Oversample must be multiple of 8." msgstr "" -#: shared-bindings/pulseio/PWMOut.c +#: shared-bindings/pwmio/PWMOut.c msgid "" "PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)" msgstr "" -#: shared-bindings/pulseio/PWMOut.c +#: shared-bindings/pwmio/PWMOut.c msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" @@ -1349,8 +1349,8 @@ msgstr "" #: ports/nrf/common-hal/pulseio/PulseOut.c #: ports/stm/common-hal/pulseio/PulseOut.c msgid "" -"Port does not accept pins or frequency. " -"Construct and pass a PWMOut Carrier instead" +"Port does not accept pins or frequency. Construct and pass a PWMOut Carrier " +"instead" msgstr "" #: shared-bindings/_bleio/Adapter.c @@ -1576,7 +1576,7 @@ msgstr "" msgid "Timeout is too long: Maximum timeout length is %d seconds" msgstr "" -#: ports/stm/common-hal/pulseio/PWMOut.c +#: ports/stm/common-hal/pwmio/PWMOut.c msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" @@ -2899,6 +2899,14 @@ msgstr "" msgid "ord() expected a character, but string of length %d found" msgstr "" +#: shared-bindings/displayio/Bitmap.c +msgid "out of range of source" +msgstr "" + +#: shared-bindings/displayio/Bitmap.c +msgid "out of range of target" +msgstr "" + #: py/objint_mpz.c msgid "overflow converting long int to machine word" msgstr "" @@ -3076,6 +3084,10 @@ msgstr "" msgid "sosfilt requires iterable arguments" msgstr "" +#: shared-bindings/displayio/Bitmap.c +msgid "source palette too large" +msgstr "" + #: py/objstr.c msgid "start/end indices" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index c1a8ded4e..b353f4630 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-05-24 03:22+0000\n" "Last-Translator: dronecz <mzuzelka@gmail.com>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -750,7 +750,7 @@ msgstr "" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "" @@ -1334,6 +1334,15 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1346,6 +1355,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 10c07f667..87cca4a77 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-06-16 18:24+0000\n" "Last-Translator: Andreas Buchen <andreas.buchen@gmail.com>\n" "Language: de_DE\n" @@ -760,7 +760,7 @@ msgstr "Fehler in regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Erwartet ein(e) %q" @@ -1362,6 +1362,15 @@ msgstr "und alle Module im Dateisystem \n" msgid "Polygon needs at least 3 points" msgstr "Polygone brauchen mindestens 3 Punkte" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Der Präfixbuffer muss sich auf dem Heap befinden" @@ -1376,6 +1385,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull wird nicht verwendet, wenn die Richtung output ist." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "PulseOut wird auf diesem Chip nicht unterstützt" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit-Fehler" @@ -3553,9 +3566,6 @@ msgstr "" #~ msgid "'async for' or 'async with' outside async function" #~ msgstr "'async for' oder 'async with' außerhalb der asynchronen Funktion" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "PulseOut wird auf diesem Chip nicht unterstützt" - #~ msgid "PulseIn not supported on this chip" #~ msgstr "PulseIn wird auf diesem Chip nicht unterstützt" diff --git a/locale/es.po b/locale/es.po index 5012b749b..882904f64 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-08-17 21:11+0000\n" "Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n" "Language-Team: \n" @@ -765,7 +765,7 @@ msgstr "Error en regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Se espera un %q" @@ -1362,6 +1362,15 @@ msgstr "Además de cualquier módulo en el sistema de archivos\n" msgid "Polygon needs at least 3 points" msgstr "El polÃgono necesita al menos 3 puntos" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "El búfer de prefijo debe estar en el montÃculo" @@ -1375,6 +1384,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull no se usa cuando la dirección es output." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "PulseOut no es compatible con este chip" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Error de desinicializado del RNG" @@ -3539,9 +3552,6 @@ msgstr "zi debe ser una forma (n_section,2)" #~ msgid "'async for' or 'async with' outside async function" #~ msgstr "'async for' o 'async with' fuera de la función async" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "PulseOut no es compatible con este chip" - #~ msgid "PulseIn not supported on this chip" #~ msgstr "PulseIn no es compatible con este chip" diff --git a/locale/fil.po b/locale/fil.po index 37a21dc6a..ec4f9f685 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy <me@timothygarcia.ca>\n" "Language-Team: fil\n" @@ -754,7 +754,7 @@ msgstr "May pagkakamali sa REGEX" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Umasa ng %q" @@ -1346,6 +1346,15 @@ msgstr "Kasama ang kung ano pang modules na sa filesystem\n" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1360,6 +1369,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull hindi ginagamit kapag ang direksyon ay output." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/fr.po b/locale/fr.po index 419cef785..0562053f1 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-07-27 21:27+0000\n" "Last-Translator: Nathan <bonnemainsnathan@gmail.com>\n" "Language: fr\n" @@ -768,7 +768,7 @@ msgstr "Erreur dans l'expression régulière" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Attendu un %q" @@ -1369,6 +1369,15 @@ msgstr "Ainsi que tout autre module présent sur le système de fichiers\n" msgid "Polygon needs at least 3 points" msgstr "Polygone a besoin d’au moins 3 points" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Le tampon de préfixe doit être sur le tas" @@ -1381,6 +1390,10 @@ msgstr "Appuyez sur une touche pour entrer sur REPL ou CTRL-D pour recharger." msgid "Pull not used when direction is output." msgstr "Le tirage 'pull' n'est pas utilisé quand la direction est 'output'." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "PulseOut non pris en charge sur cette puce" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Erreur RNG DeInit" @@ -3557,9 +3570,6 @@ msgstr "" #~ msgid "'async for' or 'async with' outside async function" #~ msgstr "'async for' ou 'async with' sans fonction asynchrone extérieure" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "PulseOut non pris en charge sur cette puce" - #~ msgid "PulseIn not supported on this chip" #~ msgstr "PulseIn non pris en charge sur cette puce" diff --git a/locale/hi.po b/locale/hi.po index 9d0dd74e9..50a1887f6 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -743,7 +743,7 @@ msgstr "" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "" @@ -1327,6 +1327,15 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1339,6 +1348,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index e128b7ef9..9635220af 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n" "Language-Team: \n" @@ -754,7 +754,7 @@ msgstr "Errore nella regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Atteso un %q" @@ -1356,6 +1356,15 @@ msgstr "Imposssibile rimontare il filesystem" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1369,6 +1378,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/ja.po b/locale/ja.po index 8385cce1b..7c3b42580 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-08-16 13:25+0000\n" "Last-Translator: Taku Fukada <naninunenor@gmail.com>\n" "Language-Team: none\n" @@ -759,7 +759,7 @@ msgstr "æ£è¦è¡¨ç¾ã«ã‚¨ãƒ©ãƒ¼ãŒã‚ã‚Šã¾ã™" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "" @@ -1348,6 +1348,15 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "ãƒãƒªã‚´ãƒ³ã«ã¯å°‘ãªãã¨ã‚‚3ã¤ã®ç‚¹ãŒå¿…è¦" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Prefixãƒãƒƒãƒ•ã‚¡ã¯ãƒ’ープ上ã«ãªã‘ã‚Œã°ãªã‚Šã¾ã›ã‚“" @@ -1361,6 +1370,10 @@ msgstr "何らã‹ã®ã‚ーを押ã™ã¨REPLã«å…¥ã‚Šã¾ã™ã€‚CTRL-Dã§ãƒªãƒãƒ¼ãƒ msgid "Pull not used when direction is output." msgstr "æ–¹å‘ãŒoutputã®ã¨ãpullã¯ä½¿ã‚ã‚Œã¾ã›ã‚“" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "乱数生æˆå™¨ã®è§£ä½“エラー" diff --git a/locale/ko.po b/locale/ko.po index e86372bcb..ecf539946 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2019-05-06 14:22-0700\n" "Last-Translator: \n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -746,7 +746,7 @@ msgstr "Regexì— ì˜¤ë¥˜ê°€ 있습니다." #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "%q ì´ ì˜ˆìƒë˜ì—ˆìŠµë‹ˆë‹¤." @@ -1330,6 +1330,15 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1342,6 +1351,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index b26592f1e..313359668 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-08-10 19:59+0000\n" "Last-Translator: _fonzlate <vooralfred@gmail.com>\n" "Language-Team: none\n" @@ -762,7 +762,7 @@ msgstr "Fout in regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Verwacht een %q" @@ -1364,6 +1364,15 @@ msgstr "En iedere module in het bestandssysteem\n" msgid "Polygon needs at least 3 points" msgstr "Polygon heeft op zijn minst 3 punten nodig" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Prefix buffer moet op de heap zijn" @@ -1378,6 +1387,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull niet gebruikt wanneer de richting output is." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "PulseOut niet ondersteund door deze chip" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit Fout" @@ -3531,9 +3544,6 @@ msgstr "zi moet vorm (n_section, 2) hebben" #~ msgid "PulseIn not supported on this chip" #~ msgstr "PusleIn niet ondersteund door deze chip" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "PulseOut niet ondersteund door deze chip" - #~ msgid "I2C operation not supported" #~ msgstr "I2C actie niet ondersteund" diff --git a/locale/pl.po b/locale/pl.po index 8250f840d..6c52062d9 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2019-03-19 18:37-0700\n" "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n" "Language-Team: pl\n" @@ -746,7 +746,7 @@ msgstr "BÅ‚Ä…d w regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Oczekiwano %q" @@ -1332,6 +1332,15 @@ msgstr "Oraz moduÅ‚y w systemie plików\n" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1344,6 +1353,10 @@ msgstr "Dowolny klawisz aby uruchomić konsolÄ™. CTRL-D aby przeÅ‚adować." msgid "Pull not used when direction is output." msgstr "PodciÄ…gniÄ™cie nieużywane w trybie wyjÅ›cia." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 459b198df..9fb4142c4 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,8 +5,8 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" -"PO-Revision-Date: 2020-08-16 02:25+0000\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" +"PO-Revision-Date: 2020-08-21 18:19+0000\n" "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n" "Language-Team: \n" "Language: pt_BR\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.2-dev\n" +"X-Generator: Weblate 4.2.1-dev\n" #: main.c msgid "" @@ -767,7 +767,7 @@ msgstr "Erro no regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Esperado um" @@ -1367,6 +1367,17 @@ msgstr "Além de quaisquer módulos no sistema de arquivos\n" msgid "Polygon needs at least 3 points" msgstr "O PolÃgono precisa de pelo menos 3 pontos" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" +"A porta não aceita pinos ou frequência. " +"Em vez disso, Construa e encaminhe um PWMOut Carrier" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1382,6 +1393,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "O Pull não foi usado quando a direção for gerada." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "O PulseOut não é compatÃvel neste CI" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Erro DeInit RNG" @@ -3552,9 +3567,6 @@ msgstr "zi deve estar na forma (n_section, 2)" #~ msgid "'async for' or 'async with' outside async function" #~ msgstr "'assÃncrono para' ou 'assÃncrono com' função assÃncrona externa" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "O PulseOut não é compatÃvel neste CI" - #~ msgid "PulseIn not supported on this chip" #~ msgstr "O PulseIn não é compatÃvel neste CI" diff --git a/locale/sv.po b/locale/sv.po index d747de177..df205b109 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-07-25 20:58+0000\n" "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -758,7 +758,7 @@ msgstr "Fel i regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Förväntade %q" @@ -1355,6 +1355,15 @@ msgstr "Plus eventuella moduler i filsystemet\n" msgid "Polygon needs at least 3 points" msgstr "Polygonen behöver minst 3 punkter" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Prefixbufferten mÃ¥ste finnas pÃ¥ heap" @@ -1368,6 +1377,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull används inte när riktningen är output." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "PulseIn stöds inte av detta chip" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit-fel" @@ -3519,9 +3532,6 @@ msgstr "zi mÃ¥ste vara i formen (n_section, 2)" #~ msgid "'async for' or 'async with' outside async function" #~ msgstr "'async for' eller 'async with' utanför async-funktion" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "PulseIn stöds inte av detta chip" - #~ msgid "PulseIn not supported on this chip" #~ msgstr "PulseIn stöds inte av detta chip" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 3e5d21d45..725491f5b 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2019-04-13 10:10-0700\n" "Last-Translator: hexthat\n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -755,7 +755,7 @@ msgstr "Zhèngzé biÇŽodá shì cuòwù" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Yùqà %q" @@ -1350,6 +1350,15 @@ msgstr "Zà i wénjià n xìtÇ’ng shà ng tiÄnjiÄ rènhé mókuà i\n" msgid "Polygon needs at least 3 points" msgstr "DuÅbiÄnxÃng zhìshÇŽo xÅ«yà o 3 diÇŽn" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Qiánzhuì huÇŽnchÅng qÅ« bìxÅ« zà i duÄ« shà ng" @@ -1362,6 +1371,10 @@ msgstr "Àn xià rènhé jià n jìnrù REPL. ShÇyòng CTRL-D chóngxÄ«n jiÄzà msgid "Pull not used when direction is output." msgstr "FÄngxià ng shÅ«chÅ« shà Pull méiyÇ’u shÇyòng." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG qÇ”xiÄo chÅ«shÇhuà cuòwù" @@ -444,11 +444,12 @@ int run_repl(void) { } int __attribute__((used)) main(void) { - memory_init(); - // initialise the cpu and peripherals safe_mode_t safe_mode = port_init(); + // Init memory after the port in case the port needs to set aside memory. + memory_init(); + // Turn on LEDs init_status_leds(); rgb_led_status_init(); diff --git a/ports/atmel-samd/boards/blm_badge/pins.c b/ports/atmel-samd/boards/blm_badge/pins.c index af1b69358..6e7d8da75 100644 --- a/ports/atmel-samd/boards/blm_badge/pins.c +++ b/ports/atmel-samd/boards/blm_badge/pins.c @@ -39,5 +39,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_L), MP_ROM_PTR(&pin_PA03) }, { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA03) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, }; MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/pycubed/board.c b/ports/atmel-samd/boards/pycubed/board.c index 9d29d2a66..0bf586ad8 100644 --- a/ports/atmel-samd/boards/pycubed/board.c +++ b/ports/atmel-samd/boards/pycubed/board.c @@ -32,7 +32,7 @@ #include "shared-bindings/nvm/ByteArray.h" #include "common-hal/microcontroller/Pin.h" #include "hal/include/hal_gpio.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" nvm_bytearray_obj_t bootcnt = { .base = { @@ -44,9 +44,9 @@ nvm_bytearray_obj_t bootcnt = { void board_init(void) { - pulseio_pwmout_obj_t pwm; - common_hal_pulseio_pwmout_construct(&pwm, &pin_PA23, 4096, 2, false); - common_hal_pulseio_pwmout_never_reset(&pwm); + pwmio_pwmout_obj_t pwm; + common_hal_pwmio_pwmout_construct(&pwm, &pin_PA23, 4096, 2, false); + common_hal_pwmio_pwmout_never_reset(&pwm); } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/pycubed_mram/board.c b/ports/atmel-samd/boards/pycubed_mram/board.c index 9d29d2a66..0bf586ad8 100644 --- a/ports/atmel-samd/boards/pycubed_mram/board.c +++ b/ports/atmel-samd/boards/pycubed_mram/board.c @@ -32,7 +32,7 @@ #include "shared-bindings/nvm/ByteArray.h" #include "common-hal/microcontroller/Pin.h" #include "hal/include/hal_gpio.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" nvm_bytearray_obj_t bootcnt = { .base = { @@ -44,9 +44,9 @@ nvm_bytearray_obj_t bootcnt = { void board_init(void) { - pulseio_pwmout_obj_t pwm; - common_hal_pulseio_pwmout_construct(&pwm, &pin_PA23, 4096, 2, false); - common_hal_pulseio_pwmout_never_reset(&pwm); + pwmio_pwmout_obj_t pwm; + common_hal_pwmio_pwmout_construct(&pwm, &pin_PA23, 4096, 2, false); + common_hal_pwmio_pwmout_never_reset(&pwm); } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/common-hal/pulseio/PulseOut.c b/ports/atmel-samd/common-hal/pulseio/PulseOut.c index b53c8da2b..086052a97 100644 --- a/ports/atmel-samd/common-hal/pulseio/PulseOut.c +++ b/ports/atmel-samd/common-hal/pulseio/PulseOut.c @@ -96,13 +96,12 @@ void pulseout_reset() { } void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pulseio_pwmout_obj_t* carrier, + const pwmio_pwmout_obj_t* carrier, const mcu_pin_obj_t* pin, uint32_t frequency, uint16_t duty_cycle) { if (!carrier || pin || frequency) { - mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. \ - Construct and pass a PWMOut Carrier instead")); + mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. Construct and pass a PWMOut Carrier instead")); } if (refcount == 0) { diff --git a/ports/atmel-samd/common-hal/pulseio/PWMOut.c b/ports/atmel-samd/common-hal/pwmio/PWMOut.c index e33437dad..2e538ccdc 100644 --- a/ports/atmel-samd/common-hal/pulseio/PWMOut.c +++ b/ports/atmel-samd/common-hal/pwmio/PWMOut.c @@ -28,8 +28,8 @@ #include <stdint.h> #include "py/runtime.h" -#include "common-hal/pulseio/PWMOut.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" #include "shared-bindings/microcontroller/Processor.h" #include "timer_handler.h" @@ -78,13 +78,13 @@ void timer_reset_ok(int index, bool is_tc) { } -void common_hal_pulseio_pwmout_never_reset(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_never_reset(pwmio_pwmout_obj_t *self) { timer_never_reset(self->timer->index, self->timer->is_tc); never_reset_pin_number(self->pin->number); } -void common_hal_pulseio_pwmout_reset_ok(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_reset_ok(pwmio_pwmout_obj_t *self) { timer_reset_ok(self->timer->index, self->timer->is_tc); } @@ -137,7 +137,7 @@ bool channel_ok(const pin_timer_t* t) { t->is_tc; } -pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self, +pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t* self, const mcu_pin_obj_t* pin, uint16_t duty, uint32_t frequency, @@ -296,16 +296,16 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self, gpio_set_pin_function(pin->number, GPIO_PIN_FUNCTION_E + mux_position); - common_hal_pulseio_pwmout_set_duty_cycle(self, duty); + common_hal_pwmio_pwmout_set_duty_cycle(self, duty); return PWMOUT_OK; } -bool common_hal_pulseio_pwmout_deinited(pulseio_pwmout_obj_t* self) { +bool common_hal_pwmio_pwmout_deinited(pwmio_pwmout_obj_t* self) { return self->pin == NULL; } -void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) { - if (common_hal_pulseio_pwmout_deinited(self)) { +void common_hal_pwmio_pwmout_deinit(pwmio_pwmout_obj_t* self) { + if (common_hal_pwmio_pwmout_deinited(self)) { return; } const pin_timer_t* t = self->timer; @@ -331,7 +331,7 @@ void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) { self->pin = NULL; } -extern void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t* self, uint16_t duty) { +extern void common_hal_pwmio_pwmout_set_duty_cycle(pwmio_pwmout_obj_t* self, uint16_t duty) { // Store the unadjusted duty cycle. It turns out the the process of adjusting and calculating // the duty cycle here and reading it back is lossy - the value will decay over time. // Track it here so that if frequency is changed we can use this value to recalculate the @@ -373,7 +373,7 @@ extern void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t* self, } } -uint16_t common_hal_pulseio_pwmout_get_duty_cycle(pulseio_pwmout_obj_t* self) { +uint16_t common_hal_pwmio_pwmout_get_duty_cycle(pwmio_pwmout_obj_t* self) { const pin_timer_t* t = self->timer; if (t->is_tc) { Tc* tc = tc_insts[t->index]; @@ -411,7 +411,7 @@ uint16_t common_hal_pulseio_pwmout_get_duty_cycle(pulseio_pwmout_obj_t* self) { } -void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self, +void common_hal_pwmio_pwmout_set_frequency(pwmio_pwmout_obj_t* self, uint32_t frequency) { if (frequency == 0 || frequency > 6000000) { mp_raise_ValueError(translate("Invalid PWM frequency")); @@ -466,10 +466,10 @@ void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self, #endif } - common_hal_pulseio_pwmout_set_duty_cycle(self, self->duty_cycle); + common_hal_pwmio_pwmout_set_duty_cycle(self, self->duty_cycle); } -uint32_t common_hal_pulseio_pwmout_get_frequency(pulseio_pwmout_obj_t* self) { +uint32_t common_hal_pwmio_pwmout_get_frequency(pwmio_pwmout_obj_t* self) { uint32_t system_clock = common_hal_mcu_processor_get_frequency(); const pin_timer_t* t = self->timer; uint8_t divisor; @@ -484,6 +484,6 @@ uint32_t common_hal_pulseio_pwmout_get_frequency(pulseio_pwmout_obj_t* self) { return (system_clock / prescaler[divisor]) / (top + 1); } -bool common_hal_pulseio_pwmout_get_variable_frequency(pulseio_pwmout_obj_t* self) { +bool common_hal_pwmio_pwmout_get_variable_frequency(pwmio_pwmout_obj_t* self) { return self->variable_frequency; } diff --git a/ports/atmel-samd/common-hal/pulseio/PWMOut.h b/ports/atmel-samd/common-hal/pwmio/PWMOut.h index 09abda819..1f5e62bae 100644 --- a/ports/atmel-samd/common-hal/pulseio/PWMOut.h +++ b/ports/atmel-samd/common-hal/pwmio/PWMOut.h @@ -24,8 +24,8 @@ * THE SOFTWARE. */ -#ifndef MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_PULSEIO_PWMOUT_H -#define MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_PULSEIO_PWMOUT_H +#ifndef MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_PWMIO_PWMOUT_H +#define MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_PWMIO_PWMOUT_H #include "common-hal/microcontroller/Pin.h" @@ -37,8 +37,8 @@ typedef struct { const pin_timer_t* timer; bool variable_frequency; uint16_t duty_cycle; -} pulseio_pwmout_obj_t; +} pwmio_pwmout_obj_t; void pwmout_reset(void); -#endif // MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_PULSEIO_PWMOUT_H +#endif // MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_PWMIO_PWMOUT_H diff --git a/ports/atmel-samd/common-hal/pwmio/__init__.c b/ports/atmel-samd/common-hal/pwmio/__init__.c new file mode 100644 index 000000000..9e551a107 --- /dev/null +++ b/ports/atmel-samd/common-hal/pwmio/__init__.c @@ -0,0 +1 @@ +// No pwmio module functions. diff --git a/ports/atmel-samd/supervisor/port.c b/ports/atmel-samd/supervisor/port.c index 591a85853..6352afb1d 100644 --- a/ports/atmel-samd/supervisor/port.c +++ b/ports/atmel-samd/supervisor/port.c @@ -59,7 +59,7 @@ #include "common-hal/microcontroller/Pin.h" #include "common-hal/pulseio/PulseIn.h" #include "common-hal/pulseio/PulseOut.h" -#include "common-hal/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" #include "common-hal/ps2io/Ps2.h" #include "common-hal/rtc/RTC.h" @@ -335,6 +335,8 @@ void reset_port(void) { #if CIRCUITPY_PULSEIO pulsein_reset(); pulseout_reset(); +#endif +#if CIRCUITPY_PWMIO pwmout_reset(); #endif diff --git a/ports/cxd56/common-hal/microcontroller/Processor.h b/ports/cxd56/common-hal/microcontroller/Processor.h index 12555e82c..5d7ad5697 100644 --- a/ports/cxd56/common-hal/microcontroller/Processor.h +++ b/ports/cxd56/common-hal/microcontroller/Processor.h @@ -35,6 +35,6 @@ typedef struct { mp_obj_base_t base; } mcu_processor_obj_t; -const mp_obj_type_t mcu_processor_type; +extern const mp_obj_type_t mcu_processor_type; #endif // MICROPY_INCLUDED_CXD56_COMMON_HAL_MICROCONTROLLER_PROCESSOR_H diff --git a/ports/cxd56/common-hal/pulseio/PulseOut.c b/ports/cxd56/common-hal/pulseio/PulseOut.c index 08081020f..f08e7cd7a 100644 --- a/ports/cxd56/common-hal/pulseio/PulseOut.c +++ b/ports/cxd56/common-hal/pulseio/PulseOut.c @@ -59,13 +59,12 @@ static bool pulseout_timer_handler(unsigned int *next_interval_us, void *arg) } void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pulseio_pwmout_obj_t* carrier, + const pwmio_pwmout_obj_t* carrier, const mcu_pin_obj_t* pin, uint32_t frequency, uint16_t duty_cycle) { if (!carrier || pin || frequency) { - mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. \ - Construct and pass a PWMOut Carrier instead")); + mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. Construct and pass a PWMOut Carrier instead")); } if (pulse_fd < 0) { diff --git a/ports/cxd56/common-hal/pulseio/PWMOut.c b/ports/cxd56/common-hal/pwmio/PWMOut.c index 7e0be566b..e0eb7abde 100644 --- a/ports/cxd56/common-hal/pulseio/PWMOut.c +++ b/ports/cxd56/common-hal/pwmio/PWMOut.c @@ -30,7 +30,7 @@ #include "py/runtime.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" typedef struct { const char* devpath; @@ -46,7 +46,7 @@ STATIC pwmout_dev_t pwmout_dev[] = { {"/dev/pwm3", &pin_PWM3, -1, true} }; -pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t *self, +pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t *self, const mcu_pin_obj_t *pin, uint16_t duty, uint32_t frequency, bool variable_frequency) { self->number = -1; @@ -85,8 +85,8 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t *self, return PWMOUT_OK; } -void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t *self) { - if (common_hal_pulseio_pwmout_deinited(self)) { +void common_hal_pwmio_pwmout_deinit(pwmio_pwmout_obj_t *self) { + if (common_hal_pwmio_pwmout_deinited(self)) { return; } @@ -98,21 +98,21 @@ void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t *self) { self->pin = NULL; } -bool common_hal_pulseio_pwmout_deinited(pulseio_pwmout_obj_t *self) { +bool common_hal_pwmio_pwmout_deinited(pwmio_pwmout_obj_t *self) { return pwmout_dev[self->number].fd < 0; } -void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t *self, uint16_t duty) { +void common_hal_pwmio_pwmout_set_duty_cycle(pwmio_pwmout_obj_t *self, uint16_t duty) { self->info.duty = duty; ioctl(pwmout_dev[self->number].fd, PWMIOC_SETCHARACTERISTICS, (unsigned long)((uintptr_t)&self->info)); } -uint16_t common_hal_pulseio_pwmout_get_duty_cycle(pulseio_pwmout_obj_t *self) { +uint16_t common_hal_pwmio_pwmout_get_duty_cycle(pwmio_pwmout_obj_t *self) { return self->info.duty; } -void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t *self, uint32_t frequency) { +void common_hal_pwmio_pwmout_set_frequency(pwmio_pwmout_obj_t *self, uint32_t frequency) { self->info.frequency = frequency; if (ioctl(pwmout_dev[self->number].fd, PWMIOC_SETCHARACTERISTICS, (unsigned long)((uintptr_t)&self->info)) < 0) { @@ -120,21 +120,21 @@ void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t *self, uint32_ } } -uint32_t common_hal_pulseio_pwmout_get_frequency(pulseio_pwmout_obj_t *self) { +uint32_t common_hal_pwmio_pwmout_get_frequency(pwmio_pwmout_obj_t *self) { return self->info.frequency; } -bool common_hal_pulseio_pwmout_get_variable_frequency(pulseio_pwmout_obj_t *self) { +bool common_hal_pwmio_pwmout_get_variable_frequency(pwmio_pwmout_obj_t *self) { return self->variable_frequency; } -void common_hal_pulseio_pwmout_never_reset(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_never_reset(pwmio_pwmout_obj_t *self) { never_reset_pin_number(self->pin->number); pwmout_dev[self->number].reset = false; } -void common_hal_pulseio_pwmout_reset_ok(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_reset_ok(pwmio_pwmout_obj_t *self) { pwmout_dev[self->number].reset = true; } diff --git a/ports/cxd56/common-hal/pulseio/PWMOut.h b/ports/cxd56/common-hal/pwmio/PWMOut.h index 694acc4e0..d9f3ea389 100644 --- a/ports/cxd56/common-hal/pulseio/PWMOut.h +++ b/ports/cxd56/common-hal/pwmio/PWMOut.h @@ -24,8 +24,8 @@ * THE SOFTWARE. */ -#ifndef MICROPY_INCLUDED_CXD56_COMMON_HAL_PULSEIO_PWMOUT_H -#define MICROPY_INCLUDED_CXD56_COMMON_HAL_PULSEIO_PWMOUT_H +#ifndef MICROPY_INCLUDED_CXD56_COMMON_HAL_PWMIO_PWMOUT_H +#define MICROPY_INCLUDED_CXD56_COMMON_HAL_PWMIO_PWMOUT_H #include <nuttx/timers/pwm.h> @@ -39,10 +39,10 @@ typedef struct { struct pwm_info_s info; bool variable_frequency; int8_t number; -} pulseio_pwmout_obj_t; +} pwmio_pwmout_obj_t; void pwmout_reset(void); void pwmout_start(uint8_t pwm_num); void pwmout_stop(uint8_t pwm_num); -#endif // MICROPY_INCLUDED_CXD56_COMMON_HAL_PULSEIO_PWMOUT_H +#endif // MICROPY_INCLUDED_CXD56_COMMON_HAL_PWMIO_PWMOUT_H diff --git a/ports/cxd56/common-hal/pwmio/__init__.c b/ports/cxd56/common-hal/pwmio/__init__.c new file mode 100644 index 000000000..9e551a107 --- /dev/null +++ b/ports/cxd56/common-hal/pwmio/__init__.c @@ -0,0 +1 @@ +// No pwmio module functions. diff --git a/ports/cxd56/supervisor/port.c b/ports/cxd56/supervisor/port.c index bbd864f90..7038ca478 100644 --- a/ports/cxd56/supervisor/port.c +++ b/ports/cxd56/supervisor/port.c @@ -43,7 +43,7 @@ #include "common-hal/microcontroller/Pin.h" #include "common-hal/analogio/AnalogIn.h" #include "common-hal/pulseio/PulseOut.h" -#include "common-hal/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" #include "common-hal/busio/UART.h" safe_mode_t port_init(void) { @@ -69,6 +69,8 @@ void reset_port(void) { #endif #if CIRCUITPY_PULSEIO pulseout_reset(); +#endif +#if CIRCUITPY_PWMIO pwmout_reset(); #endif #if CIRCUITPY_BUSIO diff --git a/ports/esp32s2/boards/electroniccats_bastwifi/board.c b/ports/esp32s2/boards/electroniccats_bastwifi/board.c new file mode 100644 index 000000000..9f708874b --- /dev/null +++ b/ports/esp32s2/boards/electroniccats_bastwifi/board.c @@ -0,0 +1,47 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" +#include "shared-bindings/microcontroller/Pin.h" + +void board_init(void) { + // USB + common_hal_never_reset_pin(&pin_GPIO19); + common_hal_never_reset_pin(&pin_GPIO20); + + // Debug UART + common_hal_never_reset_pin(&pin_GPIO43); + common_hal_never_reset_pin(&pin_GPIO44); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h b/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h new file mode 100644 index 000000000..ed3f23a3c --- /dev/null +++ b/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h @@ -0,0 +1,32 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +//Micropython setup + +#define MICROPY_HW_BOARD_NAME "BastWiFi" +#define MICROPY_HW_MCU_NAME "ESP32S2" + +#define AUTORESET_DELAY_MS 500 diff --git a/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.mk b/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.mk new file mode 100644 index 000000000..6a6ae7937 --- /dev/null +++ b/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.mk @@ -0,0 +1,19 @@ +USB_VID = 0x1209 +USB_PID = 0xBAB0 +USB_PRODUCT = "Bast WiFi" +USB_MANUFACTURER = "ElectronicCats" + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = MPZ + +# The default queue depth of 16 overflows on release builds, +# so increase it to 32. +CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32 + +CIRCUITPY_NEOPIXEL_WRITE = 0 + +CIRCUITPY_ESP_FLASH_MODE=dio +CIRCUITPY_ESP_FLASH_FREQ=40m +CIRCUITPY_ESP_FLASH_SIZE=4MB + +CIRCUITPY_MODULE=wrover diff --git a/ports/esp32s2/boards/electroniccats_bastwifi/pins.c b/ports/esp32s2/boards/electroniccats_bastwifi/pins.c new file mode 100644 index 000000000..2f9987b0e --- /dev/null +++ b/ports/esp32s2/boards/electroniccats_bastwifi/pins.c @@ -0,0 +1,64 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) }, + { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO16) }, + { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) }, + + + { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) }, + { MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) }, + { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_IO26), MP_ROM_PTR(&pin_GPIO26) }, + { MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_IO34), MP_ROM_PTR(&pin_GPIO34) }, + { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) }, + { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) }, + { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO37) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO35) }, + { MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) }, + { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) }, + { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) }, + { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) }, + { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) }, + { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) }, + { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) }, + { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) }, + { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/electroniccats_bastwifi/sdkconfig b/ports/esp32s2/boards/electroniccats_bastwifi/sdkconfig new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/ports/esp32s2/boards/electroniccats_bastwifi/sdkconfig diff --git a/ports/esp32s2/boards/espressif_kaluga_1/board.c b/ports/esp32s2/boards/espressif_kaluga_1/board.c new file mode 100644 index 000000000..9f708874b --- /dev/null +++ b/ports/esp32s2/boards/espressif_kaluga_1/board.c @@ -0,0 +1,47 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" +#include "shared-bindings/microcontroller/Pin.h" + +void board_init(void) { + // USB + common_hal_never_reset_pin(&pin_GPIO19); + common_hal_never_reset_pin(&pin_GPIO20); + + // Debug UART + common_hal_never_reset_pin(&pin_GPIO43); + common_hal_never_reset_pin(&pin_GPIO44); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h new file mode 100644 index 000000000..84d15ffc2 --- /dev/null +++ b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -0,0 +1,34 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +//Micropython setup + +#define MICROPY_HW_BOARD_NAME "Kaluga 1" +#define MICROPY_HW_MCU_NAME "ESP32S2" + +#define MICROPY_HW_NEOPIXEL (&pin_GPIO45) + +#define AUTORESET_DELAY_MS 500 diff --git a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk new file mode 100644 index 000000000..ba85e46ef --- /dev/null +++ b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk @@ -0,0 +1,17 @@ +USB_VID = 0x239A +USB_PID = 0x80C8 +USB_PRODUCT = "Kaluga 1" +USB_MANUFACTURER = "Espressif" + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = MPZ + +# The default queue depth of 16 overflows on release builds, +# so increase it to 32. +CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32 + +CIRCUITPY_ESP_FLASH_MODE=dio +CIRCUITPY_ESP_FLASH_FREQ=40m +CIRCUITPY_ESP_FLASH_SIZE=4MB + +CIRCUITPY_MODULE=wrover diff --git a/ports/esp32s2/boards/espressif_kaluga_1/pins.c b/ports/esp32s2/boards/espressif_kaluga_1/pins.c new file mode 100644 index 000000000..c1657d6c0 --- /dev/null +++ b/ports/esp32s2/boards/espressif_kaluga_1/pins.c @@ -0,0 +1,125 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) }, + { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) }, + { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) }, + + + { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) }, + { MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) }, + { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_IO26), MP_ROM_PTR(&pin_GPIO26) }, + { MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_IO34), MP_ROM_PTR(&pin_GPIO34) }, + { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) }, + { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) }, + { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) }, + { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) }, + { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) }, + { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) }, + { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) }, + { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) }, + { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) }, + { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) }, + { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) }, + { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) }, + + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO45) }, + + { MP_ROM_QSTR(MP_QSTR_CAMERA_XCLK), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_PCLK), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_HREF), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_VSYNC), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_SIOD), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_SIOC), MP_ROM_PTR(&pin_GPIO7) }, + + + { MP_ROM_QSTR(MP_QSTR_CAMERA_D2), MP_ROM_PTR(&pin_GPIO46) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_D3), MP_ROM_PTR(&pin_GPIO45) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_D4), MP_ROM_PTR(&pin_GPIO41) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_D5), MP_ROM_PTR(&pin_GPIO42) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_D6), MP_ROM_PTR(&pin_GPIO39) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_D7), MP_ROM_PTR(&pin_GPIO40) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_D8), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_CAMERA_D9), MP_ROM_PTR(&pin_GPIO38) }, + + + { MP_ROM_QSTR(MP_QSTR_TOUCH1), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH2), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH3), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH4), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH5), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH7), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH8), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH9), MP_ROM_PTR(&pin_GPIO9) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH11), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH13), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_TOUCH14), MP_ROM_PTR(&pin_GPIO14) }, + + // LED FPC + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_BT_ARRAY_ADC), MP_ROM_PTR(&pin_GPIO6) }, + + // 3.2 inch LCD FPC + { MP_ROM_QSTR(MP_QSTR_LCD_TP_MISO), MP_ROM_PTR(&pin_GPIO42) }, + { MP_ROM_QSTR(MP_QSTR_LCD_TP_MOSI), MP_ROM_PTR(&pin_GPIO40) }, + { MP_ROM_QSTR(MP_QSTR_LCD_TP_SCK), MP_ROM_PTR(&pin_GPIO38) }, + { MP_ROM_QSTR(MP_QSTR_LCD_TP_CS), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_LCD_TP_IRQ), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_LCD_TP_BUSY), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_LCD_BL_CTR), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_LCD_MISO), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_LCD_MOSI), MP_ROM_PTR(&pin_GPIO9) }, + { MP_ROM_QSTR(MP_QSTR_LCD_CS), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_LCD_D_C), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_LCD_CLK), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_LCD_RST), MP_ROM_PTR(&pin_GPIO16) }, + + // Audio + { MP_ROM_QSTR(MP_QSTR_AUDIO_SPI_MISO), MP_ROM_PTR(&pin_GPIO42) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_SPI_MOSI), MP_ROM_PTR(&pin_GPIO40) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_SPI_SCK), MP_ROM_PTR(&pin_GPIO38) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_SPI_CS), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_BT_ADC), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_SCL), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_SDA), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S0_MCLK), MP_ROM_PTR(&pin_GPIO41) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S0_BCLK), MP_ROM_PTR(&pin_GPIO39) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S0_LRCK), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S0_SDI), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S0_SDO), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_RST), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_WAKE_INT), MP_ROM_PTR(&pin_GPIO34) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S1_MCLK), MP_ROM_PTR(&pin_GPIO35) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_PA_CTRL), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S1_SDI), MP_ROM_PTR(&pin_GPIO46) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S1_SDO), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S1_LRCK_DAC1), MP_ROM_PTR(&pin_GPIO17) }, + { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S1_BCLK_DAC2), MP_ROM_PTR(&pin_GPIO18) }, + +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/espressif_kaluga_1/sdkconfig b/ports/esp32s2/boards/espressif_kaluga_1/sdkconfig new file mode 100644 index 000000000..9d8bbde96 --- /dev/null +++ b/ports/esp32s2/boards/espressif_kaluga_1/sdkconfig @@ -0,0 +1,33 @@ +CONFIG_ESP32S2_SPIRAM_SUPPORT=y + +# +# SPI RAM config +# +# CONFIG_SPIRAM_TYPE_AUTO is not set +CONFIG_SPIRAM_TYPE_ESPPSRAM16=y +# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set +# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set +CONFIG_SPIRAM_SIZE=2097152 + +# +# PSRAM clock and cs IO for ESP32S2 +# +CONFIG_DEFAULT_PSRAM_CLK_IO=30 +CONFIG_DEFAULT_PSRAM_CS_IO=26 +# end of PSRAM clock and cs IO for ESP32S2 + +# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set +# CONFIG_SPIRAM_RODATA is not set +# CONFIG_SPIRAM_SPEED_80M is not set +CONFIG_SPIRAM_SPEED_40M=y +# CONFIG_SPIRAM_SPEED_26M is not set +# CONFIG_SPIRAM_SPEED_20M is not set +CONFIG_SPIRAM=y +CONFIG_SPIRAM_BOOT_INIT=y +# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set +CONFIG_SPIRAM_USE_MEMMAP=y +# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set +# CONFIG_SPIRAM_USE_MALLOC is not set +CONFIG_SPIRAM_MEMTEST=y +# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set +# end of SPI RAM config diff --git a/ports/esp32s2/boards/espressif_saola_1_wrover/sdkconfig b/ports/esp32s2/boards/espressif_saola_1_wrover/sdkconfig index e69de29bb..9d8bbde96 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wrover/sdkconfig +++ b/ports/esp32s2/boards/espressif_saola_1_wrover/sdkconfig @@ -0,0 +1,33 @@ +CONFIG_ESP32S2_SPIRAM_SUPPORT=y + +# +# SPI RAM config +# +# CONFIG_SPIRAM_TYPE_AUTO is not set +CONFIG_SPIRAM_TYPE_ESPPSRAM16=y +# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set +# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set +CONFIG_SPIRAM_SIZE=2097152 + +# +# PSRAM clock and cs IO for ESP32S2 +# +CONFIG_DEFAULT_PSRAM_CLK_IO=30 +CONFIG_DEFAULT_PSRAM_CS_IO=26 +# end of PSRAM clock and cs IO for ESP32S2 + +# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set +# CONFIG_SPIRAM_RODATA is not set +# CONFIG_SPIRAM_SPEED_80M is not set +CONFIG_SPIRAM_SPEED_40M=y +# CONFIG_SPIRAM_SPEED_26M is not set +# CONFIG_SPIRAM_SPEED_20M is not set +CONFIG_SPIRAM=y +CONFIG_SPIRAM_BOOT_INIT=y +# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set +CONFIG_SPIRAM_USE_MEMMAP=y +# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set +# CONFIG_SPIRAM_USE_MALLOC is not set +CONFIG_SPIRAM_MEMTEST=y +# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set +# end of SPI RAM config diff --git a/ports/esp32s2/boards/microdev_micro_s2/board.c b/ports/esp32s2/boards/microdev_micro_s2/board.c new file mode 100644 index 000000000..1dc30b5af --- /dev/null +++ b/ports/esp32s2/boards/microdev_micro_s2/board.c @@ -0,0 +1,56 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" +#include "shared-bindings/microcontroller/Pin.h" + +void board_init(void) { + // USB + common_hal_never_reset_pin(&pin_GPIO19); + common_hal_never_reset_pin(&pin_GPIO20); + + // Debug UART + common_hal_never_reset_pin(&pin_GPIO43); + common_hal_never_reset_pin(&pin_GPIO44); + + // SPI Flash and RAM + common_hal_never_reset_pin(&pin_GPIO26); + common_hal_never_reset_pin(&pin_GPIO27); + common_hal_never_reset_pin(&pin_GPIO28); + common_hal_never_reset_pin(&pin_GPIO29); + common_hal_never_reset_pin(&pin_GPIO30); + common_hal_never_reset_pin(&pin_GPIO31); + common_hal_never_reset_pin(&pin_GPIO32); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h new file mode 100644 index 000000000..bb28fe16a --- /dev/null +++ b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h @@ -0,0 +1,35 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +//Micropython setup + +#define MICROPY_HW_BOARD_NAME "microDev microS2" +#define MICROPY_HW_MCU_NAME "ESP32S2" + +#define MICROPY_HW_LED (&pin_GPIO21) +#define MICROPY_HW_NEOPIXEL (&pin_GPIO33) + +#define AUTORESET_DELAY_MS 500 diff --git a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.mk b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.mk new file mode 100644 index 000000000..783e7ad4c --- /dev/null +++ b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.mk @@ -0,0 +1,15 @@ +USB_VID = 0x239A +USB_PID = 0x80C6 +USB_PRODUCT = "microS2" +USB_MANUFACTURER = "microDev" + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = MPZ + +# The default queue depth of 16 overflows on release builds, +# so increase it to 32. +CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32 + +CIRCUITPY_ESP_FLASH_MODE=qio +CIRCUITPY_ESP_FLASH_FREQ=40m +CIRCUITPY_ESP_FLASH_SIZE=16MB diff --git a/ports/esp32s2/boards/microdev_micro_s2/pins.c b/ports/esp32s2/boards/microdev_micro_s2/pins.c new file mode 100644 index 000000000..25300b5c3 --- /dev/null +++ b/ports/esp32s2/boards/microdev_micro_s2/pins.c @@ -0,0 +1,49 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) }, + { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) }, + { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) }, + { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) }, + { MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) }, + { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_IO26), MP_ROM_PTR(&pin_GPIO26) }, + { MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_IO34), MP_ROM_PTR(&pin_GPIO34) }, + { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) }, + { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) }, + { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) }, + { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) }, + { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) }, + { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) }, + { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) }, + { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) }, + { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) }, + { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) }, + { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) }, + { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) }, + + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) }, + + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO21) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO33) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/microdev_micro_s2/sdkconfig b/ports/esp32s2/boards/microdev_micro_s2/sdkconfig new file mode 100644 index 000000000..b73c4a8c2 --- /dev/null +++ b/ports/esp32s2/boards/microdev_micro_s2/sdkconfig @@ -0,0 +1,35 @@ +CONFIG_ESP32S2_SPIRAM_SUPPORT=y + +# +# SPI RAM config +# +# CONFIG_SPIRAM_TYPE_AUTO is not set +# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set +# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set +CONFIG_SPIRAM_TYPE_ESPPSRAM64=y +CONFIG_SPIRAM_SIZE=8388608 + +# +# PSRAM clock and cs IO for ESP32S2 +# +CONFIG_DEFAULT_PSRAM_CLK_IO=30 +CONFIG_DEFAULT_PSRAM_CS_IO=26 +# end of PSRAM clock and cs IO for ESP32S2 + +CONFIG_SPIRAM_SPIWP_SD3_PIN=28 +# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set +# CONFIG_SPIRAM_RODATA is not set +# CONFIG_SPIRAM_USE_AHB_DBUS3 is not set +# CONFIG_SPIRAM_SPEED_80M is not set +CONFIG_SPIRAM_SPEED_40M=y +# CONFIG_SPIRAM_SPEED_26M is not set +# CONFIG_SPIRAM_SPEED_20M is not set +CONFIG_SPIRAM=y +CONFIG_SPIRAM_BOOT_INIT=y +# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set +CONFIG_SPIRAM_USE_MEMMAP=y +# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set +# CONFIG_SPIRAM_USE_MALLOC is not set +CONFIG_SPIRAM_MEMTEST=y +# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set +# end of SPI RAM config diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/sdkconfig b/ports/esp32s2/boards/unexpectedmaker_feathers2/sdkconfig index e69de29bb..b73c4a8c2 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/sdkconfig +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/sdkconfig @@ -0,0 +1,35 @@ +CONFIG_ESP32S2_SPIRAM_SUPPORT=y + +# +# SPI RAM config +# +# CONFIG_SPIRAM_TYPE_AUTO is not set +# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set +# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set +CONFIG_SPIRAM_TYPE_ESPPSRAM64=y +CONFIG_SPIRAM_SIZE=8388608 + +# +# PSRAM clock and cs IO for ESP32S2 +# +CONFIG_DEFAULT_PSRAM_CLK_IO=30 +CONFIG_DEFAULT_PSRAM_CS_IO=26 +# end of PSRAM clock and cs IO for ESP32S2 + +CONFIG_SPIRAM_SPIWP_SD3_PIN=28 +# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set +# CONFIG_SPIRAM_RODATA is not set +# CONFIG_SPIRAM_USE_AHB_DBUS3 is not set +# CONFIG_SPIRAM_SPEED_80M is not set +CONFIG_SPIRAM_SPEED_40M=y +# CONFIG_SPIRAM_SPEED_26M is not set +# CONFIG_SPIRAM_SPEED_20M is not set +CONFIG_SPIRAM=y +CONFIG_SPIRAM_BOOT_INIT=y +# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set +CONFIG_SPIRAM_USE_MEMMAP=y +# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set +# CONFIG_SPIRAM_USE_MALLOC is not set +CONFIG_SPIRAM_MEMTEST=y +# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set +# end of SPI RAM config diff --git a/ports/esp32s2/common-hal/os/__init__.c b/ports/esp32s2/common-hal/os/__init__.c index 17bda75ad..4d6a6a2bf 100644 --- a/ports/esp32s2/common-hal/os/__init__.c +++ b/ports/esp32s2/common-hal/os/__init__.c @@ -30,6 +30,8 @@ #include "py/objtuple.h" #include "py/qstr.h" +#include "esp_system.h" + STATIC const qstr os_uname_info_fields[] = { MP_QSTR_sysname, MP_QSTR_nodename, MP_QSTR_release, MP_QSTR_version, MP_QSTR_machine @@ -57,5 +59,15 @@ mp_obj_t common_hal_os_uname(void) { } bool common_hal_os_urandom(uint8_t* buffer, uint32_t length) { - return false; + uint32_t i = 0; + while (i < length) { + uint32_t new_random = esp_random(); + for (int j = 0; j < 4 && i < length; j++) { + buffer[i] = new_random & 0xff; + i++; + new_random >>= 8; + } + } + + return true; } diff --git a/ports/esp32s2/common-hal/pulseio/PulseOut.c b/ports/esp32s2/common-hal/pulseio/PulseOut.c index d3c163ca8..e45492a89 100644 --- a/ports/esp32s2/common-hal/pulseio/PulseOut.c +++ b/ports/esp32s2/common-hal/pulseio/PulseOut.c @@ -26,19 +26,18 @@ #include "common-hal/pulseio/PulseOut.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" #include "py/runtime.h" // Requires rmt.c void esp32s2_peripherals_reset_all(void) to reset void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pulseio_pwmout_obj_t* carrier, + const pwmio_pwmout_obj_t* carrier, const mcu_pin_obj_t* pin, uint32_t frequency, uint16_t duty_cycle) { if (carrier || !pin || !frequency) { - mp_raise_NotImplementedError(translate("Port does not accept PWM carrier. \ - Pass a pin, frequency and duty cycle instead")); + mp_raise_NotImplementedError(translate("Port does not accept PWM carrier. Pass a pin, frequency and duty cycle instead")); } rmt_channel_t channel = esp32s2_peripherals_find_and_reserve_rmt(); diff --git a/ports/esp32s2/common-hal/pulseio/PulseOut.h b/ports/esp32s2/common-hal/pulseio/PulseOut.h index 513905992..629591af6 100644 --- a/ports/esp32s2/common-hal/pulseio/PulseOut.h +++ b/ports/esp32s2/common-hal/pulseio/PulseOut.h @@ -28,7 +28,6 @@ #define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PULSEIO_PULSEOUT_H #include "common-hal/microcontroller/Pin.h" -#include "common-hal/pulseio/PWMOut.h" #include "driver/rmt.h" #include "rmt.h" diff --git a/ports/esp32s2/common-hal/pulseio/PWMOut.c b/ports/esp32s2/common-hal/pwmio/PWMOut.c index 0ac42852a..d745b7789 100644 --- a/ports/esp32s2/common-hal/pulseio/PWMOut.c +++ b/ports/esp32s2/common-hal/pwmio/PWMOut.c @@ -25,8 +25,8 @@ */ #include <math.h> -#include "common-hal/pulseio/PWMOut.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" #include "py/runtime.h" #include "driver/ledc.h" @@ -58,7 +58,7 @@ void pwmout_reset(void) { not_first_reset = true; } -pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self, +pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t* self, const mcu_pin_obj_t* pin, uint16_t duty, uint32_t frequency, @@ -140,27 +140,27 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self, claim_pin(pin); // Set initial duty - common_hal_pulseio_pwmout_set_duty_cycle(self, duty); + common_hal_pwmio_pwmout_set_duty_cycle(self, duty); return PWMOUT_OK; } -void common_hal_pulseio_pwmout_never_reset(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_never_reset(pwmio_pwmout_obj_t *self) { never_reset_tim[self->tim_handle.timer_num] = true; never_reset_chan[self->chan_handle.channel] = true; } -void common_hal_pulseio_pwmout_reset_ok(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_reset_ok(pwmio_pwmout_obj_t *self) { never_reset_tim[self->tim_handle.timer_num] = false; never_reset_chan[self->chan_handle.channel] = false; } -bool common_hal_pulseio_pwmout_deinited(pulseio_pwmout_obj_t* self) { +bool common_hal_pwmio_pwmout_deinited(pwmio_pwmout_obj_t* self) { return self->deinited == true; } -void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) { - if (common_hal_pulseio_pwmout_deinited(self)) { +void common_hal_pwmio_pwmout_deinit(pwmio_pwmout_obj_t* self) { + if (common_hal_pwmio_pwmout_deinited(self)) { return; } @@ -186,23 +186,23 @@ void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) { self->deinited = true; } -void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t* self, uint16_t duty) { +void common_hal_pwmio_pwmout_set_duty_cycle(pwmio_pwmout_obj_t* self, uint16_t duty) { ledc_set_duty(LEDC_LOW_SPEED_MODE, self->chan_handle.channel, duty >> (16 - self->duty_resolution)); ledc_update_duty(LEDC_LOW_SPEED_MODE, self->chan_handle.channel); } -uint16_t common_hal_pulseio_pwmout_get_duty_cycle(pulseio_pwmout_obj_t* self) { +uint16_t common_hal_pwmio_pwmout_get_duty_cycle(pwmio_pwmout_obj_t* self) { return ledc_get_duty(LEDC_LOW_SPEED_MODE, self->chan_handle.channel) << (16 - self->duty_resolution); } -void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self, uint32_t frequency) { +void common_hal_pwmio_pwmout_set_frequency(pwmio_pwmout_obj_t* self, uint32_t frequency) { ledc_set_freq(LEDC_LOW_SPEED_MODE, self->tim_handle.timer_num, frequency); } -uint32_t common_hal_pulseio_pwmout_get_frequency(pulseio_pwmout_obj_t* self) { +uint32_t common_hal_pwmio_pwmout_get_frequency(pwmio_pwmout_obj_t* self) { return ledc_get_freq(LEDC_LOW_SPEED_MODE, self->tim_handle.timer_num); } -bool common_hal_pulseio_pwmout_get_variable_frequency(pulseio_pwmout_obj_t* self) { +bool common_hal_pwmio_pwmout_get_variable_frequency(pwmio_pwmout_obj_t* self) { return self->variable_frequency; } diff --git a/ports/esp32s2/common-hal/pulseio/PWMOut.h b/ports/esp32s2/common-hal/pwmio/PWMOut.h index 90a0c3ed9..c489e5a27 100644 --- a/ports/esp32s2/common-hal/pulseio/PWMOut.h +++ b/ports/esp32s2/common-hal/pwmio/PWMOut.h @@ -24,8 +24,8 @@ * THE SOFTWARE. */ -#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PULSEIO_PWMOUT_H -#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PULSEIO_PWMOUT_H +#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PWMIO_PWMOUT_H +#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PWMIO_PWMOUT_H #include "common-hal/microcontroller/Pin.h" #include "driver/ledc.h" @@ -38,8 +38,8 @@ typedef struct { uint8_t duty_resolution; bool variable_frequency: 1; bool deinited: 1; -} pulseio_pwmout_obj_t; +} pwmio_pwmout_obj_t; void pwmout_reset(void); -#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PULSEIO_PWMOUT_H +#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PWMIO_PWMOUT_H diff --git a/ports/esp32s2/common-hal/pwmio/__init__.c b/ports/esp32s2/common-hal/pwmio/__init__.c new file mode 100644 index 000000000..9e551a107 --- /dev/null +++ b/ports/esp32s2/common-hal/pwmio/__init__.c @@ -0,0 +1 @@ +// No pwmio module functions. diff --git a/ports/esp32s2/mpconfigport.mk b/ports/esp32s2/mpconfigport.mk index a7873aa46..d13eb17f7 100644 --- a/ports/esp32s2/mpconfigport.mk +++ b/ports/esp32s2/mpconfigport.mk @@ -25,8 +25,9 @@ CIRCUITPY_COUNTIO = 0 # These modules are implemented in shared-module/ - they can be included in # any port once their prerequisites in common-hal are complete. -CIRCUITPY_RANDOM = 0 # Requires OS -CIRCUITPY_USB_MIDI = 0 # Requires USB -CIRCUITPY_ULAB = 0 # No requirements, but takes extra flash +# Requires USB +CIRCUITPY_USB_MIDI = 0 +# Too large for the partition table! +CIRCUITPY_ULAB = 0 CIRCUITPY_MODULE ?= none diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 46590b551..1300c2b71 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -38,12 +38,19 @@ #include "common-hal/busio/I2C.h" #include "common-hal/busio/SPI.h" #include "common-hal/busio/UART.h" -#include "common-hal/pulseio/PWMOut.h" #include "common-hal/pulseio/PulseIn.h" +#include "common-hal/pwmio/PWMOut.h" #include "supervisor/memory.h" #include "supervisor/shared/tick.h" -#include "rmt.h" +#include "peripherals/rmt.h" +#include "esp-idf/components/heap/include/esp_heap_caps.h" +#include "esp-idf/components/soc/soc/esp32s2/include/soc/cache_memory.h" + +#define HEAP_SIZE (48 * 1024) + +uint32_t* heap; +uint32_t heap_size; STATIC esp_timer_handle_t _tick_timer; @@ -59,6 +66,16 @@ safe_mode_t port_init(void) { args.name = "CircuitPython Tick"; esp_timer_create(&args, &_tick_timer); never_reset_module_internal_pins(); + + #ifdef CONFIG_SPIRAM + heap = (uint32_t*) (DRAM0_CACHE_ADDRESS_HIGH - CONFIG_SPIRAM_SIZE); + heap_size = CONFIG_SPIRAM_SIZE / sizeof(uint32_t); + #endif + + if (heap == NULL) { + heap = malloc(HEAP_SIZE); + heap_size = HEAP_SIZE / sizeof(uint32_t); + } return NO_SAFE_MODE; } @@ -70,9 +87,13 @@ void reset_port(void) { #if CIRCUITPY_PULSEIO esp32s2_peripherals_rmt_reset(); - pwmout_reset(); pulsein_reset(); #endif + +#if CIRCUITPY_PWMIO + pwmout_reset(); +#endif + #if CIRCUITPY_BUSIO i2c_reset(); spi_reset(); @@ -86,14 +107,12 @@ void reset_to_bootloader(void) { void reset_cpu(void) { } -uint32_t heap[64 / sizeof(uint32_t) * 1024]; - uint32_t *port_heap_get_bottom(void) { return heap; } uint32_t *port_heap_get_top(void) { - return heap + sizeof(heap) / sizeof(heap[0]); + return heap + heap_size; } uint32_t *port_stack_get_limit(void) { diff --git a/ports/mimxrt10xx/common-hal/pulseio/PulseOut.c b/ports/mimxrt10xx/common-hal/pulseio/PulseOut.c index 3aefd8766..d3a1a897f 100644 --- a/ports/mimxrt10xx/common-hal/pulseio/PulseOut.c +++ b/ports/mimxrt10xx/common-hal/pulseio/PulseOut.c @@ -94,7 +94,7 @@ void pulseout_reset() { } void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pulseio_pwmout_obj_t* carrier, + const pwmio_pwmout_obj_t* carrier, const mcu_pin_obj_t* pin, uint32_t frequency, uint16_t duty_cycle) { diff --git a/ports/mimxrt10xx/common-hal/pulseio/PWMOut.c b/ports/mimxrt10xx/common-hal/pwmio/PWMOut.c index 50dd477ea..dd464ef84 100644 --- a/ports/mimxrt10xx/common-hal/pulseio/PWMOut.c +++ b/ports/mimxrt10xx/common-hal/pwmio/PWMOut.c @@ -29,8 +29,8 @@ #include <stdint.h> #include "py/runtime.h" -#include "common-hal/pulseio/PWMOut.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" #include "shared-bindings/microcontroller/Processor.h" #include "fsl_pwm.h" @@ -64,7 +64,7 @@ // //static uint8_t never_reset_tc_or_tcc[TC_INST_NUM + TCC_INST_NUM]; -void common_hal_pulseio_pwmout_never_reset(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_never_reset(pwmio_pwmout_obj_t *self) { // if (self->timer->is_tc) { // never_reset_tc_or_tcc[self->timer->index] += 1; // } else { @@ -74,7 +74,7 @@ void common_hal_pulseio_pwmout_never_reset(pulseio_pwmout_obj_t *self) { // never_reset_pin_number(self->pin->number); } -void common_hal_pulseio_pwmout_reset_ok(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_reset_ok(pwmio_pwmout_obj_t *self) { // if (self->timer->is_tc) { // never_reset_tc_or_tcc[self->timer->index] -= 1; // } else { @@ -133,7 +133,7 @@ void pwmout_reset(void) { #define PWM_SRC_CLK_FREQ CLOCK_GetFreq(kCLOCK_IpgClk) -pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t *self, +pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t *self, const mcu_pin_obj_t *pin, uint16_t duty, uint32_t frequency, @@ -359,17 +359,17 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t *self, // // gpio_set_pin_function(pin->number, GPIO_PIN_FUNCTION_E + mux_position); - common_hal_pulseio_pwmout_set_duty_cycle(self, duty); + common_hal_pwmio_pwmout_set_duty_cycle(self, duty); return PWMOUT_OK; } -bool common_hal_pulseio_pwmout_deinited(pulseio_pwmout_obj_t* self) { +bool common_hal_pwmio_pwmout_deinited(pwmio_pwmout_obj_t* self) { return self->pin == NULL; } -void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) { - if (common_hal_pulseio_pwmout_deinited(self)) { +void common_hal_pwmio_pwmout_deinit(pwmio_pwmout_obj_t* self) { + if (common_hal_pwmio_pwmout_deinited(self)) { return; } @@ -396,7 +396,7 @@ void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) { self->pin = NULL; } -void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t *self, uint16_t duty) { +void common_hal_pwmio_pwmout_set_duty_cycle(pwmio_pwmout_obj_t *self, uint16_t duty) { PWM_UpdatePwmDutycycle(PWM1, self->pwm->submodule, self->pwm->channel, kPWM_SignedCenterAligned, duty); // const pin_timer_t* t = self->timer; @@ -433,7 +433,7 @@ void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t *self, uint16 // } } -uint16_t common_hal_pulseio_pwmout_get_duty_cycle(pulseio_pwmout_obj_t* self) { +uint16_t common_hal_pwmio_pwmout_get_duty_cycle(pwmio_pwmout_obj_t* self) { return 0; // const pin_timer_t* t = self->timer; // if (t->is_tc) { @@ -471,7 +471,7 @@ uint16_t common_hal_pulseio_pwmout_get_duty_cycle(pulseio_pwmout_obj_t* self) { // } } -void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self, +void common_hal_pwmio_pwmout_set_frequency(pwmio_pwmout_obj_t* self, uint32_t frequency) { // if (frequency == 0 || frequency > 6000000) { // mp_raise_ValueError(translate("Invalid PWM frequency")); @@ -492,7 +492,7 @@ void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self, // break; // } // } -// uint16_t old_duty = common_hal_pulseio_pwmout_get_duty_cycle(self); +// uint16_t old_duty = common_hal_pwmio_pwmout_get_duty_cycle(self); // if (t->is_tc) { // Tc* tc = tc_insts[t->index]; // uint8_t old_divisor = tc->COUNT16.CTRLA.bit.PRESCALER; @@ -527,10 +527,10 @@ void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self, // #endif // } -// common_hal_pulseio_pwmout_set_duty_cycle(self, old_duty); +// common_hal_pwmio_pwmout_set_duty_cycle(self, old_duty); } -uint32_t common_hal_pulseio_pwmout_get_frequency(pulseio_pwmout_obj_t* self) { +uint32_t common_hal_pwmio_pwmout_get_frequency(pwmio_pwmout_obj_t* self) { // uint32_t system_clock = common_hal_mcu_processor_get_frequency(); // const pin_timer_t* t = self->timer; // uint8_t divisor; @@ -546,6 +546,6 @@ uint32_t common_hal_pulseio_pwmout_get_frequency(pulseio_pwmout_obj_t* self) { return 0; } -bool common_hal_pulseio_pwmout_get_variable_frequency(pulseio_pwmout_obj_t* self) { +bool common_hal_pwmio_pwmout_get_variable_frequency(pwmio_pwmout_obj_t* self) { return self->variable_frequency; } diff --git a/ports/mimxrt10xx/common-hal/pulseio/PWMOut.h b/ports/mimxrt10xx/common-hal/pwmio/PWMOut.h index 2f0fe94c4..d3954de40 100644 --- a/ports/mimxrt10xx/common-hal/pulseio/PWMOut.h +++ b/ports/mimxrt10xx/common-hal/pwmio/PWMOut.h @@ -25,8 +25,8 @@ * THE SOFTWARE. */ -#ifndef MICROPY_INCLUDED_MIMXRT10XX_COMMON_HAL_PULSEIO_PWMOUT_H -#define MICROPY_INCLUDED_MIMXRT10XX_COMMON_HAL_PULSEIO_PWMOUT_H +#ifndef MICROPY_INCLUDED_MIMXRT10XX_COMMON_HAL_PWMIO_PWMOUT_H +#define MICROPY_INCLUDED_MIMXRT10XX_COMMON_HAL_PWMIO_PWMOUT_H #include "common-hal/microcontroller/Pin.h" #include "periph.h" @@ -37,8 +37,8 @@ typedef struct { const mcu_pin_obj_t *pin; const mcu_pwm_obj_t *pwm; bool variable_frequency; -} pulseio_pwmout_obj_t; +} pwmio_pwmout_obj_t; void pwmout_reset(void); -#endif // MICROPY_INCLUDED_MIMXRT10XX_COMMON_HAL_PULSEIO_PWMOUT_H +#endif // MICROPY_INCLUDED_MIMXRT10XX_COMMON_HAL_PWMIO_PWMOUT_H diff --git a/ports/mimxrt10xx/common-hal/pwmio/__init__.c b/ports/mimxrt10xx/common-hal/pwmio/__init__.c new file mode 100644 index 000000000..9e551a107 --- /dev/null +++ b/ports/mimxrt10xx/common-hal/pwmio/__init__.c @@ -0,0 +1 @@ +// No pwmio module functions. diff --git a/ports/mimxrt10xx/mphalport.h b/ports/mimxrt10xx/mphalport.h index 1acc461b7..4ba3a2476 100644 --- a/ports/mimxrt10xx/mphalport.h +++ b/ports/mimxrt10xx/mphalport.h @@ -39,8 +39,8 @@ static inline mp_uint_t mp_hal_ticks_ms(void) { return supervisor_ticks_ms32(); } // Number of bytes in receive buffer -volatile uint8_t usb_rx_count; -volatile bool mp_cdc_enabled; +extern volatile uint8_t usb_rx_count; +extern volatile bool mp_cdc_enabled; int receive_usb(void); diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/periph.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/periph.h index 3bc86f33a..c3f04a049 100644 --- a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/periph.h +++ b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/periph.h @@ -27,18 +27,18 @@ #ifndef MICROPY_INCLUDED_MIMXRT10XX_PERIPHERALS_MIMXRT1011_PERIPH_H #define MICROPY_INCLUDED_MIMXRT10XX_PERIPHERALS_MIMXRT1011_PERIPH_H -LPI2C_Type *mcu_i2c_banks[2]; +extern LPI2C_Type *mcu_i2c_banks[2]; extern const mcu_periph_obj_t mcu_i2c_sda_list[8]; extern const mcu_periph_obj_t mcu_i2c_scl_list[8]; -LPSPI_Type *mcu_spi_banks[2]; +extern LPSPI_Type *mcu_spi_banks[2]; extern const mcu_periph_obj_t mcu_spi_sck_list[4]; extern const mcu_periph_obj_t mcu_spi_mosi_list[4]; extern const mcu_periph_obj_t mcu_spi_miso_list[4]; -LPUART_Type *mcu_uart_banks[4]; +extern LPUART_Type *mcu_uart_banks[4]; extern const mcu_periph_obj_t mcu_uart_rx_list[9]; extern const mcu_periph_obj_t mcu_uart_tx_list[9]; diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/periph.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/periph.h index 814bc5f6c..6c778ad52 100644 --- a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/periph.h +++ b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/periph.h @@ -28,18 +28,18 @@ #ifndef MICROPY_INCLUDED_MIMXRT10XX_PERIPHERALS_MIMXRT1021_PERIPH_H #define MICROPY_INCLUDED_MIMXRT10XX_PERIPHERALS_MIMXRT1021_PERIPH_H -LPI2C_Type *mcu_i2c_banks[4]; +extern LPI2C_Type *mcu_i2c_banks[4]; extern const mcu_periph_obj_t mcu_i2c_sda_list[8]; extern const mcu_periph_obj_t mcu_i2c_scl_list[8]; -LPSPI_Type *mcu_spi_banks[4]; +extern LPSPI_Type *mcu_spi_banks[4]; extern const mcu_periph_obj_t mcu_spi_sck_list[8]; extern const mcu_periph_obj_t mcu_spi_mosi_list[8]; extern const mcu_periph_obj_t mcu_spi_miso_list[8]; -LPUART_Type *mcu_uart_banks[8]; +extern LPUART_Type *mcu_uart_banks[8]; extern const mcu_periph_obj_t mcu_uart_rx_list[16]; extern const mcu_periph_obj_t mcu_uart_tx_list[16]; diff --git a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/periph.h b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/periph.h index 35ac4fc9b..4f6ab6261 100644 --- a/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/periph.h +++ b/ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/periph.h @@ -27,18 +27,18 @@ #ifndef MICROPY_INCLUDED_MIMXRT10XX_PERIPHERALS_MIMXRT1011_PERIPH_H #define MICROPY_INCLUDED_MIMXRT10XX_PERIPHERALS_MIMXRT1011_PERIPH_H -LPI2C_Type *mcu_i2c_banks[4]; +extern LPI2C_Type *mcu_i2c_banks[4]; extern const mcu_periph_obj_t mcu_i2c_sda_list[9]; extern const mcu_periph_obj_t mcu_i2c_scl_list[9]; -LPSPI_Type *mcu_spi_banks[4]; +extern LPSPI_Type *mcu_spi_banks[4]; extern const mcu_periph_obj_t mcu_spi_sck_list[8]; extern const mcu_periph_obj_t mcu_spi_mosi_list[8]; extern const mcu_periph_obj_t mcu_spi_miso_list[8]; -LPUART_Type *mcu_uart_banks[8]; +extern LPUART_Type *mcu_uart_banks[8]; extern const mcu_periph_obj_t mcu_uart_rx_list[18]; extern const mcu_periph_obj_t mcu_uart_tx_list[18]; diff --git a/ports/mimxrt10xx/supervisor/port.c b/ports/mimxrt10xx/supervisor/port.c index 0b53a79f0..38cf16a49 100644 --- a/ports/mimxrt10xx/supervisor/port.c +++ b/ports/mimxrt10xx/supervisor/port.c @@ -39,7 +39,7 @@ #include "common-hal/microcontroller/Pin.h" #include "common-hal/pulseio/PulseIn.h" #include "common-hal/pulseio/PulseOut.h" -#include "common-hal/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" #include "common-hal/rtc/RTC.h" #include "common-hal/busio/SPI.h" @@ -289,6 +289,8 @@ void reset_port(void) { #if CIRCUITPY_PULSEIO pulseout_reset(); +#endif +#if CIRCUITPY_PWMIO pwmout_reset(); #endif diff --git a/ports/nrf/common-hal/_bleio/__init__.c b/ports/nrf/common-hal/_bleio/__init__.c index 8eea319b7..496c9429f 100644 --- a/ports/nrf/common-hal/_bleio/__init__.c +++ b/ports/nrf/common-hal/_bleio/__init__.c @@ -88,6 +88,8 @@ void check_sec_status(uint8_t sec_status) { } } +bool vm_used_ble; + // Turn off BLE on a reset or reload. void bleio_reset() { if (!common_hal_bleio_adapter_get_enabled(&common_hal_bleio_adapter_obj)) { diff --git a/ports/nrf/common-hal/_bleio/__init__.h b/ports/nrf/common-hal/_bleio/__init__.h index 0b2c5334b..97f82ece3 100644 --- a/ports/nrf/common-hal/_bleio/__init__.h +++ b/ports/nrf/common-hal/_bleio/__init__.h @@ -46,6 +46,6 @@ void check_gatt_status(uint16_t gatt_status); void check_sec_status(uint8_t sec_status); // Track if the user code modified the BLE state to know if we need to undo it on reload. -bool vm_used_ble; +extern bool vm_used_ble; #endif // MICROPY_INCLUDED_NRF_COMMON_HAL_BLEIO_INIT_H diff --git a/ports/nrf/common-hal/audiopwmio/PWMAudioOut.c b/ports/nrf/common-hal/audiopwmio/PWMAudioOut.c index 7fec766fb..ed1bf81e4 100644 --- a/ports/nrf/common-hal/audiopwmio/PWMAudioOut.c +++ b/ports/nrf/common-hal/audiopwmio/PWMAudioOut.c @@ -32,7 +32,7 @@ #include "py/mperrno.h" #include "py/runtime.h" #include "common-hal/audiopwmio/PWMAudioOut.h" -#include "common-hal/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" #include "shared-bindings/audiopwmio/PWMAudioOut.h" #include "shared-bindings/microcontroller/__init__.h" #include "shared-bindings/microcontroller/Pin.h" diff --git a/ports/nrf/common-hal/pulseio/PulseOut.c b/ports/nrf/common-hal/pulseio/PulseOut.c index bdc5cfbef..f40dbea5c 100644 --- a/ports/nrf/common-hal/pulseio/PulseOut.c +++ b/ports/nrf/common-hal/pulseio/PulseOut.c @@ -34,7 +34,7 @@ #include "py/gc.h" #include "py/runtime.h" #include "shared-bindings/pulseio/PulseOut.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" #include "supervisor/shared/translate.h" // A single timer is shared amongst all PulseOut objects under the assumption that @@ -100,13 +100,12 @@ void pulseout_reset() { } void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pulseio_pwmout_obj_t* carrier, + const pwmio_pwmout_obj_t* carrier, const mcu_pin_obj_t* pin, uint32_t frequency, uint16_t duty_cycle) { if (!carrier || pin || frequency) { - mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. \ - Construct and pass a PWMOut Carrier instead")); + mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. Construct and pass a PWMOut Carrier instead")); } if (refcount == 0) { diff --git a/ports/nrf/common-hal/pulseio/PulseOut.h b/ports/nrf/common-hal/pulseio/PulseOut.h index 42ec52e30..714f740b2 100644 --- a/ports/nrf/common-hal/pulseio/PulseOut.h +++ b/ports/nrf/common-hal/pulseio/PulseOut.h @@ -28,13 +28,13 @@ #define MICROPY_INCLUDED_NRF_COMMON_HAL_PULSEIO_PULSEOUT_H #include "common-hal/microcontroller/Pin.h" -#include "common-hal/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" #include "py/obj.h" typedef struct { mp_obj_base_t base; - const pulseio_pwmout_obj_t *pwmout; + const pwmio_pwmout_obj_t *pwmout; } pulseio_pulseout_obj_t; void pulseout_reset(void); diff --git a/ports/nrf/common-hal/pulseio/PWMOut.c b/ports/nrf/common-hal/pwmio/PWMOut.c index 9d42ccca0..a9d896488 100644 --- a/ports/nrf/common-hal/pulseio/PWMOut.c +++ b/ports/nrf/common-hal/pwmio/PWMOut.c @@ -28,8 +28,8 @@ #include "nrf.h" #include "py/runtime.h" -#include "common-hal/pulseio/PWMOut.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" #include "supervisor/shared/translate.h" #include "nrf_gpio.h" @@ -63,7 +63,7 @@ STATIC int pwm_idx(NRF_PWM_Type *pwm) { return -1; } -void common_hal_pulseio_pwmout_never_reset(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_never_reset(pwmio_pwmout_obj_t *self) { for(size_t i=0; i < MP_ARRAY_SIZE(pwms); i++) { NRF_PWM_Type* pwm = pwms[i]; if (pwm == self->pwm) { @@ -74,7 +74,7 @@ void common_hal_pulseio_pwmout_never_reset(pulseio_pwmout_obj_t *self) { never_reset_pin_number(self->pin_number); } -void common_hal_pulseio_pwmout_reset_ok(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_reset_ok(pwmio_pwmout_obj_t *self) { for(size_t i=0; i < MP_ARRAY_SIZE(pwms); i++) { NRF_PWM_Type* pwm = pwms[i]; if (pwm == self->pwm) { @@ -204,7 +204,7 @@ void pwmout_free_channel(NRF_PWM_Type *pwm, int8_t channel) { nrf_pwm_disable(pwm); } -pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self, +pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t* self, const mcu_pin_obj_t* pin, uint16_t duty, uint32_t frequency, @@ -251,16 +251,16 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self, nrf_pwm_enable(self->pwm); - common_hal_pulseio_pwmout_set_duty_cycle(self, duty); + common_hal_pwmio_pwmout_set_duty_cycle(self, duty); return PWMOUT_OK; } -bool common_hal_pulseio_pwmout_deinited(pulseio_pwmout_obj_t* self) { +bool common_hal_pwmio_pwmout_deinited(pwmio_pwmout_obj_t* self) { return self->pwm == NULL; } -void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) { - if (common_hal_pulseio_pwmout_deinited(self)) { +void common_hal_pwmio_pwmout_deinit(pwmio_pwmout_obj_t* self) { + if (common_hal_pwmio_pwmout_deinited(self)) { return; } @@ -275,7 +275,7 @@ void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) { self->pin_number = NO_PIN; } -void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t* self, uint16_t duty_cycle) { +void common_hal_pwmio_pwmout_set_duty_cycle(pwmio_pwmout_obj_t* self, uint16_t duty_cycle) { self->duty_cycle = duty_cycle; uint16_t* p_value = ((uint16_t*)self->pwm->SEQ[0].PTR) + self->channel; @@ -284,11 +284,11 @@ void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t* self, uint16 self->pwm->TASKS_SEQSTART[0] = 1; } -uint16_t common_hal_pulseio_pwmout_get_duty_cycle(pulseio_pwmout_obj_t* self) { +uint16_t common_hal_pwmio_pwmout_get_duty_cycle(pwmio_pwmout_obj_t* self) { return self->duty_cycle; } -void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self, uint32_t frequency) { +void common_hal_pwmio_pwmout_set_frequency(pwmio_pwmout_obj_t* self, uint32_t frequency) { // COUNTERTOP is 3..32767, so highest available frequency is PWM_MAX_FREQ / 3. uint16_t countertop; nrf_pwm_clk_t base_clock; @@ -300,13 +300,13 @@ void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self, uint32_ nrf_pwm_configure(self->pwm, base_clock, NRF_PWM_MODE_UP, countertop); // Set the duty cycle again, because it depends on COUNTERTOP, which probably changed. // Setting the duty cycle will also do a SEQSTART. - common_hal_pulseio_pwmout_set_duty_cycle(self, self->duty_cycle); + common_hal_pwmio_pwmout_set_duty_cycle(self, self->duty_cycle); } -uint32_t common_hal_pulseio_pwmout_get_frequency(pulseio_pwmout_obj_t* self) { +uint32_t common_hal_pwmio_pwmout_get_frequency(pwmio_pwmout_obj_t* self) { return self->frequency; } -bool common_hal_pulseio_pwmout_get_variable_frequency(pulseio_pwmout_obj_t* self) { +bool common_hal_pwmio_pwmout_get_variable_frequency(pwmio_pwmout_obj_t* self) { return self->variable_frequency; } diff --git a/ports/nrf/common-hal/pulseio/PWMOut.h b/ports/nrf/common-hal/pwmio/PWMOut.h index a0c2d8747..e910baa76 100644 --- a/ports/nrf/common-hal/pulseio/PWMOut.h +++ b/ports/nrf/common-hal/pwmio/PWMOut.h @@ -24,8 +24,8 @@ * THE SOFTWARE. */ -#ifndef MICROPY_INCLUDED_NRF_COMMON_HAL_PULSEIO_PWMOUT_H -#define MICROPY_INCLUDED_NRF_COMMON_HAL_PULSEIO_PWMOUT_H +#ifndef MICROPY_INCLUDED_NRF_COMMON_HAL_PWMIO_PWMOUT_H +#define MICROPY_INCLUDED_NRF_COMMON_HAL_PWMIO_PWMOUT_H #include "nrfx_pwm.h" #include "py/obj.h" @@ -38,7 +38,7 @@ typedef struct { bool variable_frequency: 1; uint16_t duty_cycle; uint32_t frequency; -} pulseio_pwmout_obj_t; +} pwmio_pwmout_obj_t; void pwmout_reset(void); NRF_PWM_Type *pwmout_allocate(uint16_t countertop, nrf_pwm_clk_t base_clock, @@ -46,4 +46,4 @@ NRF_PWM_Type *pwmout_allocate(uint16_t countertop, nrf_pwm_clk_t base_clock, IRQn_Type *irq); void pwmout_free_channel(NRF_PWM_Type *pwm, int8_t channel); -#endif // MICROPY_INCLUDED_NRF_COMMON_HAL_PULSEIO_PWMOUT_H +#endif // MICROPY_INCLUDED_NRF_COMMON_HAL_PWMIO_PWMOUT_H diff --git a/ports/nrf/common-hal/pwmio/__init__.c b/ports/nrf/common-hal/pwmio/__init__.c new file mode 100644 index 000000000..9e551a107 --- /dev/null +++ b/ports/nrf/common-hal/pwmio/__init__.c @@ -0,0 +1 @@ +// No pwmio module functions. diff --git a/ports/nrf/supervisor/port.c b/ports/nrf/supervisor/port.c index 87a4d7396..2945f244d 100644 --- a/ports/nrf/supervisor/port.c +++ b/ports/nrf/supervisor/port.c @@ -45,9 +45,9 @@ #include "common-hal/busio/I2C.h" #include "common-hal/busio/SPI.h" #include "common-hal/busio/UART.h" -#include "common-hal/pulseio/PWMOut.h" #include "common-hal/pulseio/PulseOut.h" #include "common-hal/pulseio/PulseIn.h" +#include "common-hal/pwmio/PWMOut.h" #include "common-hal/rtc/RTC.h" #include "common-hal/neopixel_write/__init__.h" #include "common-hal/watchdog/WatchDogTimer.h" @@ -196,11 +196,14 @@ void reset_port(void) { #if CIRCUITPY_PULSEIO - pwmout_reset(); pulseout_reset(); pulsein_reset(); #endif +#if CIRCUITPY_PWMIO + pwmout_reset(); +#endif + #if CIRCUITPY_RTC rtc_reset(); #endif diff --git a/ports/stm/boards/espruino_pico/mpconfigboard.mk b/ports/stm/boards/espruino_pico/mpconfigboard.mk index 201237c9d..b1b023dd5 100644 --- a/ports/stm/boards/espruino_pico/mpconfigboard.mk +++ b/ports/stm/boards/espruino_pico/mpconfigboard.mk @@ -10,7 +10,8 @@ MCU_VARIANT = STM32F401xE MCU_PACKAGE = UFQFPN48 LD_COMMON = boards/common_default.ld -LD_FILE = boards/STM32F401xd_fs.ld # use for internal flash +# use for internal flash +LD_FILE = boards/STM32F401xd_fs.ld # Disable ulab as we're nearly out of space on this board due to # INTERNAL_FLASH_FILESYSTEM. It can probably be reenabled if we enable diff --git a/ports/stm/boards/feather_stm32f405_express/mpconfigboard.mk b/ports/stm/boards/feather_stm32f405_express/mpconfigboard.mk index 2b2c0d6db..4d0bd4598 100644 --- a/ports/stm/boards/feather_stm32f405_express/mpconfigboard.mk +++ b/ports/stm/boards/feather_stm32f405_express/mpconfigboard.mk @@ -13,5 +13,6 @@ MCU_PACKAGE = LQFP64 LD_COMMON = boards/common_default.ld LD_DEFAULT = boards/STM32F405_default.ld -LD_BOOT = boards/STM32F405_boot.ld # UF2 boot option +# UF2 boot option +LD_BOOT = boards/STM32F405_boot.ld UF2_OFFSET = 0x8010000 diff --git a/ports/stm/boards/meowbit_v121/board.c b/ports/stm/boards/meowbit_v121/board.c index 812a8c208..b74f13516 100644 --- a/ports/stm/boards/meowbit_v121/board.c +++ b/ports/stm/boards/meowbit_v121/board.c @@ -106,7 +106,7 @@ void board_init(void) { &pin_PB03, NO_BRIGHTNESS_COMMAND, 1.0f, // brightness (ignored) - true, // auto_brightness + false, // auto_brightness false, // single_byte_bounds false, // data_as_commands true, // auto_refresh diff --git a/ports/stm/boards/meowbit_v121/mpconfigboard.h b/ports/stm/boards/meowbit_v121/mpconfigboard.h index 106f25b15..be9f2a75f 100644 --- a/ports/stm/boards/meowbit_v121/mpconfigboard.h +++ b/ports/stm/boards/meowbit_v121/mpconfigboard.h @@ -36,8 +36,7 @@ #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000) #define HSE_VALUE ((uint32_t)12000000U) -#define LSE_VALUE ((uint32_t)32000U) -#define BOARD_HAS_LOW_SPEED_CRYSTAL (1) +#define BOARD_HAS_LOW_SPEED_CRYSTAL (0) #define BOARD_NO_VBUS_SENSE (1) #define BOARD_VTOR_DEFER (1) //Leave VTOR relocation to bootloader diff --git a/ports/stm/boards/meowbit_v121/mpconfigboard.mk b/ports/stm/boards/meowbit_v121/mpconfigboard.mk index 852836ef8..16ffb2022 100644 --- a/ports/stm/boards/meowbit_v121/mpconfigboard.mk +++ b/ports/stm/boards/meowbit_v121/mpconfigboard.mk @@ -18,4 +18,5 @@ OPTIMIZATION_FLAGS = -Os LD_COMMON = boards/common_default.ld LD_FILE = boards/STM32F401xe_boot.ld -# LD_FILE = boards/STM32F401xe_fs.ld # use for internal flash +# For debugging - also comment BOOTLOADER_OFFSET and BOARD_VTOR_DEFER +# LD_FILE = boards/STM32F401xe_fs.ld diff --git a/ports/stm/common-hal/os/__init__.c b/ports/stm/common-hal/os/__init__.c index 84deb8175..8da7243a3 100644 --- a/ports/stm/common-hal/os/__init__.c +++ b/ports/stm/common-hal/os/__init__.c @@ -72,16 +72,20 @@ bool common_hal_os_urandom(uint8_t *buffer, uint32_t length) { if (HAL_RNG_Init(&handle) != HAL_OK) mp_raise_ValueError(translate("RNG Init Error")); //Assign bytes - for (uint i = 0; i < length; i++) { - uint32_t temp; + uint32_t i = 0; + while (i < length) { + uint32_t new_random; uint32_t start = HAL_GetTick(); //the HAL function has a timeout, but it isn't long enough, and isn't adjustable while(!(__HAL_RNG_GET_FLAG(&handle,RNG_FLAG_DRDY)) && ((HAL_GetTick() - start) < RNG_TIMEOUT)); - // - if (HAL_RNG_GenerateRandomNumber(&handle, &temp) != HAL_OK) { + if (HAL_RNG_GenerateRandomNumber(&handle, &new_random) != HAL_OK) { mp_raise_ValueError(translate("Random number generation error")); } - *buffer = (uint8_t)temp; + for (int j = 0; j < 4 && i < length; j++) { + buffer[i] = new_random & 0xff; + i++; + new_random >>= 8; + } } //shut down the peripheral diff --git a/ports/stm/common-hal/pulseio/PulseOut.c b/ports/stm/common-hal/pulseio/PulseOut.c index eec1049dd..963aee721 100644 --- a/ports/stm/common-hal/pulseio/PulseOut.c +++ b/ports/stm/common-hal/pulseio/PulseOut.c @@ -32,7 +32,7 @@ #include "py/gc.h" #include "py/runtime.h" #include "shared-bindings/pulseio/PulseOut.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" #include "supervisor/shared/translate.h" #include STM32_HAL_H @@ -113,13 +113,12 @@ void pulseout_reset() { } void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pulseio_pwmout_obj_t* carrier, + const pwmio_pwmout_obj_t* carrier, const mcu_pin_obj_t* pin, uint32_t frequency, uint16_t duty_cycle) { if (!carrier || pin || frequency) { - mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. \ - Construct and pass a PWMOut Carrier instead")); + mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. Construct and pass a PWMOut Carrier instead")); } // Add to active PulseOuts @@ -143,7 +142,7 @@ void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, tim_handle.Instance->SR = 0; // The HAL can't work with const, recast required. - self->pwmout = (pulseio_pwmout_obj_t*)carrier; + self->pwmout = (pwmio_pwmout_obj_t*)carrier; turn_off(self); } diff --git a/ports/stm/common-hal/pulseio/PulseOut.h b/ports/stm/common-hal/pulseio/PulseOut.h index aa97396d0..29894f27d 100644 --- a/ports/stm/common-hal/pulseio/PulseOut.h +++ b/ports/stm/common-hal/pulseio/PulseOut.h @@ -28,13 +28,13 @@ #define MICROPY_INCLUDED_STM32F4_COMMON_HAL_PULSEIO_PULSEOUT_H #include "common-hal/microcontroller/Pin.h" -#include "common-hal/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" #include "py/obj.h" typedef struct { mp_obj_base_t base; - pulseio_pwmout_obj_t *pwmout; + pwmio_pwmout_obj_t *pwmout; } pulseio_pulseout_obj_t; void pulseout_reset(void); diff --git a/ports/stm/common-hal/pulseio/PWMOut.c b/ports/stm/common-hal/pwmio/PWMOut.c index ddbadaf4c..85427185e 100644 --- a/ports/stm/common-hal/pulseio/PWMOut.c +++ b/ports/stm/common-hal/pwmio/PWMOut.c @@ -27,8 +27,8 @@ #include <stdint.h> #include "py/runtime.h" -#include "common-hal/pulseio/PWMOut.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" #include "supervisor/shared/translate.h" #include "shared-bindings/microcontroller/__init__.h" @@ -75,7 +75,7 @@ void pwmout_reset(void) { } } -pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self, +pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t* self, const mcu_pin_obj_t* pin, uint16_t duty, uint32_t frequency, @@ -96,7 +96,7 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self, //if pin is same if (l_tim->pin == pin) { //check if the timer has a channel active, or is reserved by main timer system - if (reserved_tim[l_tim_index] != 0) { + if (l_tim_index < TIM_BANK_ARRAY_LEN && reserved_tim[l_tim_index] != 0) { // Timer has already been reserved by an internal module if (stm_peripherals_timer_is_reserved(mcu_tim_banks[l_tim_index])) { tim_taken_internal = true; @@ -204,7 +204,7 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self, return PWMOUT_OK; } -void common_hal_pulseio_pwmout_never_reset(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_never_reset(pwmio_pwmout_obj_t *self) { for (size_t i = 0; i < TIM_BANK_ARRAY_LEN; i++) { if (mcu_tim_banks[i] == self->handle.Instance) { never_reset_tim[i] = true; @@ -214,7 +214,7 @@ void common_hal_pulseio_pwmout_never_reset(pulseio_pwmout_obj_t *self) { } } -void common_hal_pulseio_pwmout_reset_ok(pulseio_pwmout_obj_t *self) { +void common_hal_pwmio_pwmout_reset_ok(pwmio_pwmout_obj_t *self) { for(size_t i = 0; i < TIM_BANK_ARRAY_LEN; i++) { if (mcu_tim_banks[i] == self->handle.Instance) { never_reset_tim[i] = false; @@ -223,12 +223,12 @@ void common_hal_pulseio_pwmout_reset_ok(pulseio_pwmout_obj_t *self) { } } -bool common_hal_pulseio_pwmout_deinited(pulseio_pwmout_obj_t* self) { +bool common_hal_pwmio_pwmout_deinited(pwmio_pwmout_obj_t* self) { return self->tim == NULL; } -void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) { - if (common_hal_pulseio_pwmout_deinited(self)) { +void common_hal_pwmio_pwmout_deinit(pwmio_pwmout_obj_t* self) { + if (common_hal_pwmio_pwmout_deinited(self)) { return; } //var freq shuts down entire timer, others just their channel @@ -239,26 +239,27 @@ void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) { HAL_TIM_PWM_Stop(&self->handle, self->channel); } reset_pin_number(self->tim->pin->port,self->tim->pin->number); - self->tim = NULL; //if reserved timer has no active channels, we can disable it if (!reserved_tim[self->tim->tim_index - 1]) { tim_frequencies[self->tim->tim_index - 1] = 0x00; stm_peripherals_timer_free(self->handle.Instance); } + + self->tim = NULL; } -void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t* self, uint16_t duty) { +void common_hal_pwmio_pwmout_set_duty_cycle(pwmio_pwmout_obj_t* self, uint16_t duty) { uint32_t internal_duty_cycle = timer_get_internal_duty(duty, self->period); __HAL_TIM_SET_COMPARE(&self->handle, self->channel, internal_duty_cycle); self->duty_cycle = duty; } -uint16_t common_hal_pulseio_pwmout_get_duty_cycle(pulseio_pwmout_obj_t* self) { +uint16_t common_hal_pwmio_pwmout_get_duty_cycle(pwmio_pwmout_obj_t* self) { return self->duty_cycle; } -void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self, uint32_t frequency) { +void common_hal_pwmio_pwmout_set_frequency(pwmio_pwmout_obj_t* self, uint32_t frequency) { //don't halt setup for the same frequency if (frequency == self->frequency) { return; @@ -295,10 +296,10 @@ void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self, uint32_ self->period = period; } -uint32_t common_hal_pulseio_pwmout_get_frequency(pulseio_pwmout_obj_t* self) { +uint32_t common_hal_pwmio_pwmout_get_frequency(pwmio_pwmout_obj_t* self) { return self->frequency; } -bool common_hal_pulseio_pwmout_get_variable_frequency(pulseio_pwmout_obj_t* self) { +bool common_hal_pwmio_pwmout_get_variable_frequency(pwmio_pwmout_obj_t* self) { return self->variable_frequency; } diff --git a/ports/stm/common-hal/pulseio/PWMOut.h b/ports/stm/common-hal/pwmio/PWMOut.h index 57ab143b9..5d8001202 100644 --- a/ports/stm/common-hal/pulseio/PWMOut.h +++ b/ports/stm/common-hal/pwmio/PWMOut.h @@ -24,8 +24,8 @@ * THE SOFTWARE. */ -#ifndef MICROPY_INCLUDED_STM32F4_COMMON_HAL_PULSEIO_PWMOUT_H -#define MICROPY_INCLUDED_STM32F4_COMMON_HAL_PULSEIO_PWMOUT_H +#ifndef MICROPY_INCLUDED_STM32F4_COMMON_HAL_PWMIO_PWMOUT_H +#define MICROPY_INCLUDED_STM32F4_COMMON_HAL_PWMIO_PWMOUT_H #include "common-hal/microcontroller/Pin.h" @@ -44,8 +44,8 @@ typedef struct { uint16_t duty_cycle; uint32_t frequency; uint32_t period; -} pulseio_pwmout_obj_t; +} pwmio_pwmout_obj_t; void pwmout_reset(void); -#endif // MICROPY_INCLUDED_STM32F4_COMMON_HAL_PULSEIO_PWMOUT_H +#endif // MICROPY_INCLUDED_STM32F4_COMMON_HAL_PWMIO_PWMOUT_H diff --git a/ports/stm/common-hal/pwmio/__init__.c b/ports/stm/common-hal/pwmio/__init__.c new file mode 100644 index 000000000..9e551a107 --- /dev/null +++ b/ports/stm/common-hal/pwmio/__init__.c @@ -0,0 +1 @@ +// No pwmio module functions. diff --git a/ports/stm/mpconfigport.mk b/ports/stm/mpconfigport.mk index 19f9ffa44..b827aa48b 100644 --- a/ports/stm/mpconfigport.mk +++ b/ports/stm/mpconfigport.mk @@ -7,6 +7,7 @@ ifeq ($(MCU_VARIANT),STM32F405xx) CIRCUITPY_FRAMEBUFFERIO ?= 1 CIRCUITPY_RGBMATRIX ?= 1 CIRCUITPY_SDIOIO ?= 1 + USB_NUM_EP = 4 endif ifeq ($(MCU_SERIES),F4) diff --git a/ports/stm/mphalport.h b/ports/stm/mphalport.h index 69f2c489c..2c4caf3b2 100644 --- a/ports/stm/mphalport.h +++ b/ports/stm/mphalport.h @@ -38,8 +38,8 @@ static inline mp_uint_t mp_hal_ticks_ms(void) { return supervisor_ticks_ms32(); } // Number of bytes in receive buffer -volatile uint8_t usb_rx_count; -volatile bool mp_cdc_enabled; +extern volatile uint8_t usb_rx_count; +extern volatile bool mp_cdc_enabled; int receive_usb(void); diff --git a/ports/stm/peripherals/stm32f4/clocks.c b/ports/stm/peripherals/stm32f4/clocks.c index 7a16812b3..c2d0a452a 100644 --- a/ports/stm/peripherals/stm32f4/clocks.c +++ b/ports/stm/peripherals/stm32f4/clocks.c @@ -49,7 +49,6 @@ void stm32_peripherals_clocks_init(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct; RCC_OscInitTypeDef RCC_OscInitStruct; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - bool lse_failure = false; // Set voltage scaling in accordance with system clock speed __HAL_RCC_PWR_CLK_ENABLE(); @@ -76,15 +75,9 @@ void stm32_peripherals_clocks_init(void) { #endif if(HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - // Failure likely means a LSE issue - attempt to swap to LSI, and set to crash - RCC_OscInitStruct.LSEState = RCC_LSE_OFF; - RCC_OscInitStruct.OscillatorType |= RCC_OSCILLATORTYPE_LSI; - RCC_OscInitStruct.LSIState = RCC_LSI_ON; - if(HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - // No HSE means no USB, so just fail forever - while(1); - } - lse_failure = true; + // Clock issues are too problematic to even attempt recovery. + // If you end up here, check whether your LSE settings match your board. + while(1); } // Configure bus clock sources and divisors @@ -113,8 +106,4 @@ void stm32_peripherals_clocks_init(void) { #endif HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - if (lse_failure) { - reset_into_safe_mode(HARD_CRASH); //TODO: make safe mode category CLOCK_FAULT? - } } diff --git a/ports/stm/peripherals/stm32f4/stm32f401xe/periph.h b/ports/stm/peripherals/stm32f4/stm32f401xe/periph.h index ae416bda1..c38e9ea98 100644 --- a/ports/stm/peripherals/stm32f4/stm32f401xe/periph.h +++ b/ports/stm/peripherals/stm32f4/stm32f401xe/periph.h @@ -51,7 +51,7 @@ extern const mcu_periph_obj_t mcu_uart_rx_list[6]; //Timers #define TIM_BANK_ARRAY_LEN 14 #define TIM_PIN_ARRAY_LEN 44 -TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; -const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; +extern TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; +extern const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; #endif // MICROPY_INCLUDED_STM32_PERIPHERALS_STM32F401XE_PERIPH_H diff --git a/ports/stm/peripherals/stm32f4/stm32f405xx/periph.h b/ports/stm/peripherals/stm32f4/stm32f405xx/periph.h index 020bff370..5b64fe10c 100644 --- a/ports/stm/peripherals/stm32f4/stm32f405xx/periph.h +++ b/ports/stm/peripherals/stm32f4/stm32f405xx/periph.h @@ -58,8 +58,8 @@ extern const mcu_periph_obj_t mcu_uart_rx_list[UART_RX_ARRAY_LEN]; //Timers #define TIM_BANK_ARRAY_LEN 14 #define TIM_PIN_ARRAY_LEN 67 -TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; -const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; +extern TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; +extern const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; //SDIO extern SDIO_TypeDef * mcu_sdio_banks[1]; diff --git a/ports/stm/peripherals/stm32f4/stm32f407xx/periph.h b/ports/stm/peripherals/stm32f4/stm32f407xx/periph.h index 55c00ee93..fb6348aba 100644 --- a/ports/stm/peripherals/stm32f4/stm32f407xx/periph.h +++ b/ports/stm/peripherals/stm32f4/stm32f407xx/periph.h @@ -51,7 +51,7 @@ extern const mcu_periph_obj_t mcu_uart_rx_list[12]; //Timers #define TIM_BANK_ARRAY_LEN 14 #define TIM_PIN_ARRAY_LEN 56 -TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; -const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; +extern TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; +extern const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; #endif // MICROPY_INCLUDED_STM32_PERIPHERALS_STM32F407XX_PERIPH_H diff --git a/ports/stm/peripherals/stm32f4/stm32f411xe/periph.h b/ports/stm/peripherals/stm32f4/stm32f411xe/periph.h index 14a73d12f..f78cb57a7 100644 --- a/ports/stm/peripherals/stm32f4/stm32f411xe/periph.h +++ b/ports/stm/peripherals/stm32f4/stm32f411xe/periph.h @@ -51,7 +51,7 @@ extern const mcu_periph_obj_t mcu_uart_rx_list[7]; //Timers #define TIM_BANK_ARRAY_LEN 14 #define TIM_PIN_ARRAY_LEN 44 -TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; -const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; +extern TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; +extern const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; #endif // MICROPY_INCLUDED_STM32_PERIPHERALS_STM32F411XE_PERIPH_H diff --git a/ports/stm/peripherals/stm32f4/stm32f412zx/periph.h b/ports/stm/peripherals/stm32f4/stm32f412zx/periph.h index f6b001a4e..40afd27f4 100644 --- a/ports/stm/peripherals/stm32f4/stm32f412zx/periph.h +++ b/ports/stm/peripherals/stm32f4/stm32f412zx/periph.h @@ -52,7 +52,7 @@ extern const mcu_periph_obj_t mcu_uart_rx_list[12]; //Timers #define TIM_BANK_ARRAY_LEN 14 #define TIM_PIN_ARRAY_LEN 60 -TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; -const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; +extern TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; +extern const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; #endif // MICROPY_INCLUDED_STM32_PERIPHERALS_STM32F412ZX_PERIPH_H diff --git a/ports/stm/peripherals/stm32f7/clocks.c b/ports/stm/peripherals/stm32f7/clocks.c index 93016f682..f13088782 100644 --- a/ports/stm/peripherals/stm32f7/clocks.c +++ b/ports/stm/peripherals/stm32f7/clocks.c @@ -40,7 +40,6 @@ void stm32_peripherals_clocks_init(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct; RCC_OscInitTypeDef RCC_OscInitStruct; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - bool lse_failure = false; // Configure LSE Drive HAL_PWR_EnableBkUpAccess(); @@ -68,15 +67,9 @@ void stm32_peripherals_clocks_init(void) { RCC_OscInitStruct.PLL.PLLQ = CPY_CLK_PLLQ; if(HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - // Failure likely means a LSE issue - attempt to swap to LSI, and set to crash - RCC_OscInitStruct.LSEState = RCC_LSE_OFF; - RCC_OscInitStruct.OscillatorType |= RCC_OSCILLATORTYPE_LSI; - RCC_OscInitStruct.LSIState = RCC_LSI_ON; - if(HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - // No HSE means no USB, so just fail forever - while(1); - } - lse_failure = true; + // Clock issues are too problematic to even attempt recovery. + // If you end up here, check whether your LSE settings match your board. + while(1); } /* Activate the OverDrive to reach the 216 MHz Frequency */ @@ -111,8 +104,4 @@ void stm32_peripherals_clocks_init(void) { #endif HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - if (lse_failure) { - reset_into_safe_mode(HARD_CRASH); //TODO: make safe mode category CLOCK_FAULT? - } } diff --git a/ports/stm/peripherals/stm32f7/stm32f746xx/periph.h b/ports/stm/peripherals/stm32f7/stm32f746xx/periph.h index 26f4ad2b5..f20896e22 100644 --- a/ports/stm/peripherals/stm32f7/stm32f746xx/periph.h +++ b/ports/stm/peripherals/stm32f7/stm32f746xx/periph.h @@ -31,28 +31,28 @@ //I2C extern I2C_TypeDef * mcu_i2c_banks[4]; -const mcu_periph_obj_t mcu_i2c_sda_list[10]; -const mcu_periph_obj_t mcu_i2c_scl_list[10]; +extern const mcu_periph_obj_t mcu_i2c_sda_list[10]; +extern const mcu_periph_obj_t mcu_i2c_scl_list[10]; //SPI extern SPI_TypeDef * mcu_spi_banks[6]; -const mcu_periph_obj_t mcu_spi_sck_list[14]; -const mcu_periph_obj_t mcu_spi_mosi_list[15]; -const mcu_periph_obj_t mcu_spi_miso_list[12]; +extern const mcu_periph_obj_t mcu_spi_sck_list[14]; +extern const mcu_periph_obj_t mcu_spi_mosi_list[15]; +extern const mcu_periph_obj_t mcu_spi_miso_list[12]; //UART extern USART_TypeDef * mcu_uart_banks[MAX_UART]; extern bool mcu_uart_has_usart[MAX_UART]; -const mcu_periph_obj_t mcu_uart_tx_list[15]; -const mcu_periph_obj_t mcu_uart_rx_list[15]; +extern const mcu_periph_obj_t mcu_uart_tx_list[15]; +extern const mcu_periph_obj_t mcu_uart_rx_list[15]; //Timers #define TIM_BANK_ARRAY_LEN 14 #define TIM_PIN_ARRAY_LEN 55 extern TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; -const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; +extern const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; #endif // MICROPY_INCLUDED_STM32_PERIPHERALS_STM32F746XX_PERIPH_H diff --git a/ports/stm/peripherals/stm32f7/stm32f767xx/periph.h b/ports/stm/peripherals/stm32f7/stm32f767xx/periph.h index 438964c3e..70f03f258 100644 --- a/ports/stm/peripherals/stm32f7/stm32f767xx/periph.h +++ b/ports/stm/peripherals/stm32f7/stm32f767xx/periph.h @@ -30,28 +30,28 @@ //I2C extern I2C_TypeDef * mcu_i2c_banks[4]; -const mcu_periph_obj_t mcu_i2c_sda_list[12]; -const mcu_periph_obj_t mcu_i2c_scl_list[12]; +extern const mcu_periph_obj_t mcu_i2c_sda_list[12]; +extern const mcu_periph_obj_t mcu_i2c_scl_list[12]; //SPI extern SPI_TypeDef * mcu_spi_banks[6]; -const mcu_periph_obj_t mcu_spi_sck_list[18]; -const mcu_periph_obj_t mcu_spi_mosi_list[18]; -const mcu_periph_obj_t mcu_spi_miso_list[15]; +extern const mcu_periph_obj_t mcu_spi_sck_list[18]; +extern const mcu_periph_obj_t mcu_spi_mosi_list[18]; +extern const mcu_periph_obj_t mcu_spi_miso_list[15]; //UART extern USART_TypeDef * mcu_uart_banks[MAX_UART]; extern bool mcu_uart_has_usart[MAX_UART]; -const mcu_periph_obj_t mcu_uart_tx_list[24]; -const mcu_periph_obj_t mcu_uart_rx_list[25]; +extern const mcu_periph_obj_t mcu_uart_tx_list[24]; +extern const mcu_periph_obj_t mcu_uart_rx_list[25]; //Timers #define TIM_BANK_ARRAY_LEN 14 #define TIM_PIN_ARRAY_LEN 55 -TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; +extern TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; -const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; +extern const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN]; #endif // MICROPY_INCLUDED_STM32_PERIPHERALS_STM32F767XX_PERIPH_H diff --git a/ports/stm/peripherals/stm32h7/clocks.c b/ports/stm/peripherals/stm32h7/clocks.c index 0e4e79f9f..a088f78bf 100644 --- a/ports/stm/peripherals/stm32h7/clocks.c +++ b/ports/stm/peripherals/stm32h7/clocks.c @@ -37,7 +37,6 @@ void stm32_peripherals_clocks_init(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; - bool lse_failure = false; // Set voltage scaling in accordance with system clock speed HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); @@ -73,15 +72,9 @@ void stm32_peripherals_clocks_init(void) { RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE; RCC_OscInitStruct.PLL.PLLFRACN = 0; if(HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - // Failure likely means a LSE issue - attempt to swap to LSI, and set to crash - RCC_OscInitStruct.LSEState = RCC_LSE_OFF; - RCC_OscInitStruct.OscillatorType |= RCC_OSCILLATORTYPE_LSI; - RCC_OscInitStruct.LSIState = RCC_LSI_ON; - if(HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - // No HSE means no USB, so just fail forever - while(1); - } - lse_failure = true; + // Clock issues are too problematic to even attempt recovery. + // If you end up here, check whether your LSE settings match your board. + while(1); } // Configure bus clock sources and divisors @@ -116,8 +109,4 @@ void stm32_peripherals_clocks_init(void) { // Enable USB Voltage detector HAL_PWREx_EnableUSBVoltageDetector(); - - if (lse_failure) { - reset_into_safe_mode(HARD_CRASH); //TODO: make safe mode category CLOCK_FAULT? - } } diff --git a/ports/stm/peripherals/stm32h7/stm32h743xx/periph.h b/ports/stm/peripherals/stm32h7/stm32h743xx/periph.h index 9aa2f7366..e3902e7c7 100644 --- a/ports/stm/peripherals/stm32h7/stm32h743xx/periph.h +++ b/ports/stm/peripherals/stm32h7/stm32h743xx/periph.h @@ -30,26 +30,26 @@ //I2C extern I2C_TypeDef * mcu_i2c_banks[4]; -const mcu_periph_obj_t mcu_i2c_sda_list[12]; -const mcu_periph_obj_t mcu_i2c_scl_list[12]; +extern const mcu_periph_obj_t mcu_i2c_sda_list[12]; +extern const mcu_periph_obj_t mcu_i2c_scl_list[12]; //SPI extern SPI_TypeDef * mcu_spi_banks[6]; -const mcu_periph_obj_t mcu_spi_sck_list[19]; -const mcu_periph_obj_t mcu_spi_mosi_list[19]; -const mcu_periph_obj_t mcu_spi_miso_list[16]; +extern const mcu_periph_obj_t mcu_spi_sck_list[19]; +extern const mcu_periph_obj_t mcu_spi_mosi_list[19]; +extern const mcu_periph_obj_t mcu_spi_miso_list[16]; //UART extern USART_TypeDef * mcu_uart_banks[MAX_UART]; extern bool mcu_uart_has_usart[MAX_UART]; -const mcu_periph_obj_t mcu_uart_tx_list[25]; -const mcu_periph_obj_t mcu_uart_rx_list[26]; +extern const mcu_periph_obj_t mcu_uart_tx_list[25]; +extern const mcu_periph_obj_t mcu_uart_rx_list[26]; //Timers #define TIM_BANK_ARRAY_LEN 14 #define TIM_PIN_ARRAY_LEN 58 -TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; +extern TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN]; #endif // MICROPY_INCLUDED_STM32_PERIPHERALS_STM32H743XX_PERIPH_H diff --git a/ports/stm/supervisor/internal_flash.c b/ports/stm/supervisor/internal_flash.c index 864403c36..78ee4f3e6 100644 --- a/ports/stm/supervisor/internal_flash.c +++ b/ports/stm/supervisor/internal_flash.c @@ -177,13 +177,13 @@ void port_internal_flash_flush(void) { EraseInitStruct.VoltageRange = VOLTAGE_RANGE_3; // voltage range needs to be 2.7V to 3.6V // get the sector information uint32_t sector_size; - uint32_t sector_start_addr; + uint32_t sector_start_addr = 0xffffffff; #if defined(STM32H7) EraseInitStruct.Banks = get_bank(_cache_flash_addr); #endif EraseInitStruct.Sector = flash_get_sector_info(_cache_flash_addr, §or_start_addr, §or_size); EraseInitStruct.NbSectors = 1; - if (sector_size > sizeof(_flash_cache)) { + if (sector_size > sizeof(_flash_cache) || sector_start_addr == 0xffffffff) { reset_into_safe_mode(FLASH_WRITE_FAIL); } diff --git a/ports/stm/supervisor/port.c b/ports/stm/supervisor/port.c index 5ce92f70a..e21105001 100644 --- a/ports/stm/supervisor/port.c +++ b/ports/stm/supervisor/port.c @@ -38,9 +38,13 @@ #include "common-hal/busio/UART.h" #endif #if CIRCUITPY_PULSEIO -#include "common-hal/pulseio/PWMOut.h" #include "common-hal/pulseio/PulseOut.h" #include "common-hal/pulseio/PulseIn.h" +#endif +#if CIRCUITPY_PWMIO +#include "common-hal/pwmio/PWMOut.h" +#endif +#if CIRCUITPY_PULSEIO || CIRCUITPY_PWMIO #include "timers.h" #endif #if CIRCUITPY_SDIOIO @@ -230,12 +234,16 @@ void reset_port(void) { #if CIRCUITPY_SDIOIO sdioio_reset(); #endif -#if CIRCUITPY_PULSEIO +#if CIRCUITPY_PULSEIO || CIRCUITPY_PWMIO timers_reset(); - pwmout_reset(); +#endif +#if CIRCUITPY_PULSEIO pulseout_reset(); pulsein_reset(); #endif +#if CIRCUITPY_PWMIO + pwmout_reset(); +#endif } void reset_to_bootloader(void) { diff --git a/py/circuitpy_defns.mk b/py/circuitpy_defns.mk index a0d361fef..36524b2fb 100644 --- a/py/circuitpy_defns.mk +++ b/py/circuitpy_defns.mk @@ -198,11 +198,14 @@ endif ifeq ($(CIRCUITPY_RGBMATRIX),1) SRC_PATTERNS += rgbmatrix/% endif +ifeq ($(CIRCUITPY_PS2IO),1) +SRC_PATTERNS += ps2io/% +endif ifeq ($(CIRCUITPY_PULSEIO),1) SRC_PATTERNS += pulseio/% endif -ifeq ($(CIRCUITPY_PS2IO),1) -SRC_PATTERNS += ps2io/% +ifeq ($(CIRCUITPY_PWMIO),1) +SRC_PATTERNS += pwmio/% endif ifeq ($(CIRCUITPY_RANDOM),1) SRC_PATTERNS += random/% @@ -316,10 +319,11 @@ SRC_COMMON_HAL_ALL = \ os/__init__.c \ ps2io/Ps2.c \ ps2io/__init__.c \ - pulseio/PWMOut.c \ pulseio/PulseIn.c \ pulseio/PulseOut.c \ pulseio/__init__.c \ + pwmio/PWMOut.c \ + pwmio/__init__.c \ rgbmatrix/RGBMatrix.c \ rgbmatrix/__init__.c \ rotaryio/IncrementalEncoder.c \ diff --git a/py/circuitpy_mpconfig.h b/py/circuitpy_mpconfig.h index 12d667d8f..76b91defa 100644 --- a/py/circuitpy_mpconfig.h +++ b/py/circuitpy_mpconfig.h @@ -503,6 +503,13 @@ extern const struct _mp_obj_module_t pixelbuf_module; #define PIXELBUF_MODULE #endif +#if CIRCUITPY_PS2IO +extern const struct _mp_obj_module_t ps2io_module; +#define PS2IO_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_ps2io), (mp_obj_t)&ps2io_module }, +#else +#define PS2IO_MODULE +#endif + #if CIRCUITPY_PULSEIO extern const struct _mp_obj_module_t pulseio_module; #define PULSEIO_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_pulseio), (mp_obj_t)&pulseio_module }, @@ -510,11 +517,11 @@ extern const struct _mp_obj_module_t pulseio_module; #define PULSEIO_MODULE #endif -#if CIRCUITPY_PS2IO -extern const struct _mp_obj_module_t ps2io_module; -#define PS2IO_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_ps2io), (mp_obj_t)&ps2io_module }, +#if CIRCUITPY_PWMIO +extern const struct _mp_obj_module_t pwmio_module; +#define PWMIO_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_pwmio), (mp_obj_t)&pwmio_module }, #else -#define PS2IO_MODULE +#define PWMIO_MODULE #endif #if CIRCUITPY_RGBMATRIX @@ -740,6 +747,7 @@ extern const struct _mp_obj_module_t watchdog_module; PIXELBUF_MODULE \ PS2IO_MODULE \ PULSEIO_MODULE \ + PWMIO_MODULE \ RANDOM_MODULE \ RE_MODULE \ RGBMATRIX_MODULE \ diff --git a/py/circuitpy_mpconfig.mk b/py/circuitpy_mpconfig.mk index b5bf0ab09..90e8b5fde 100644 --- a/py/circuitpy_mpconfig.mk +++ b/py/circuitpy_mpconfig.mk @@ -152,19 +152,24 @@ CFLAGS += -DCIRCUITPY_OS=$(CIRCUITPY_OS) CIRCUITPY_PIXELBUF ?= $(CIRCUITPY_FULL_BUILD) CFLAGS += -DCIRCUITPY_PIXELBUF=$(CIRCUITPY_PIXELBUF) -CIRCUITPY_RGBMATRIX ?= 0 -CFLAGS += -DCIRCUITPY_RGBMATRIX=$(CIRCUITPY_RGBMATRIX) +# Only for SAMD boards for the moment +CIRCUITPY_PS2IO ?= 0 +CFLAGS += -DCIRCUITPY_PS2IO=$(CIRCUITPY_PS2IO) CIRCUITPY_PULSEIO ?= 1 CFLAGS += -DCIRCUITPY_PULSEIO=$(CIRCUITPY_PULSEIO) -# Only for SAMD boards for the moment -CIRCUITPY_PS2IO ?= 0 -CFLAGS += -DCIRCUITPY_PS2IO=$(CIRCUITPY_PS2IO) +# For now we tie PWMIO to PULSEIO so they always both exist. In CircuitPython 7 +# we can enable and disable them separately once PWMOut is removed from `pulseio`. +CIRCUITPY_PWMIO = $(CIRCUITPY_PULSEIO) +CFLAGS += -DCIRCUITPY_PWMIO=$(CIRCUITPY_PWMIO) CIRCUITPY_RANDOM ?= 1 CFLAGS += -DCIRCUITPY_RANDOM=$(CIRCUITPY_RANDOM) +CIRCUITPY_RGBMATRIX ?= 0 +CFLAGS += -DCIRCUITPY_RGBMATRIX=$(CIRCUITPY_RGBMATRIX) + CIRCUITPY_ROTARYIO ?= 1 CFLAGS += -DCIRCUITPY_ROTARYIO=$(CIRCUITPY_ROTARYIO) @@ -67,6 +67,8 @@ void mp_obj_print_helper(const mp_print_t *print, mp_obj_t o_in, mp_print_kind_t #ifdef RUN_BACKGROUND_TASKS RUN_BACKGROUND_TASKS; #endif + mp_handle_pending(); + #ifndef NDEBUG if (o_in == MP_OBJ_NULL) { mp_print_str(print, "(nil)"); diff --git a/shared-bindings/_bleio/Adapter.h b/shared-bindings/_bleio/Adapter.h index 36e9db761..ac7e216d8 100644 --- a/shared-bindings/_bleio/Adapter.h +++ b/shared-bindings/_bleio/Adapter.h @@ -35,7 +35,7 @@ #include "py/objstr.h" #include "shared-module/_bleio/Address.h" -const mp_obj_type_t bleio_adapter_type; +extern const mp_obj_type_t bleio_adapter_type; #if CIRCUITPY_BLEIO_HCI void common_hal_bleio_adapter_construct_hci_uart(bleio_adapter_obj_t *self, busio_uart_obj_t *uart, digitalio_digitalinout_obj_t *rts, digitalio_digitalinout_obj_t *cts); diff --git a/shared-bindings/_bleio/Service.h b/shared-bindings/_bleio/Service.h index 8b8a6ce77..44d11f60d 100644 --- a/shared-bindings/_bleio/Service.h +++ b/shared-bindings/_bleio/Service.h @@ -34,7 +34,7 @@ #include "py/objtuple.h" -const mp_obj_type_t bleio_service_type; +extern const mp_obj_type_t bleio_service_type; // Private version that doesn't allocate on the heap extern uint32_t _common_hal_bleio_service_construct(bleio_service_obj_t *self, bleio_uuid_obj_t *uuid, bool is_secondary, mp_obj_list_t * characteristic_list); diff --git a/shared-bindings/displayio/Bitmap.c b/shared-bindings/displayio/Bitmap.c index 0a45bbdfd..5a2fc785f 100644 --- a/shared-bindings/displayio/Bitmap.c +++ b/shared-bindings/displayio/Bitmap.c @@ -172,7 +172,109 @@ STATIC mp_obj_t bitmap_subscr(mp_obj_t self_in, mp_obj_t index_obj, mp_obj_t val return mp_const_none; } -//| def fill(self, value: int) -> None: +//| def blit(self, x: int, y: int, source_bitmap: bitmap, *, x1: int, y1: int, x2: int, y2: int, skip_index: int) -> None: +//| """Inserts the source_bitmap region defined by rectangular boundaries +//| (x1,y1) and (x2,y2) into the bitmap at the specified (x,y) location. +//| +//| :param int x: Horizontal pixel location in bitmap where source_bitmap upper-left +//| corner will be placed +//| :param int y: Vertical pixel location in bitmap where source_bitmap upper-left +//| corner will be placed +//| :param bitmap source_bitmap: Source bitmap that contains the graphical region to be copied +//| :param int x1: Minimum x-value for rectangular bounding box to be copied from the source bitmap +//| :param int y1: Minimum y-value for rectangular bounding box to be copied from the source bitmap +//| :param int x2: Maximum x-value (exclusive) for rectangular bounding box to be copied from the source bitmap +//| :param int y2: Maximum y-value (exclusive) for rectangular bounding box to be copied from the source bitmap +//| :param int skip_index: bitmap palette index in the source that will not be copied, +//| set to None to copy all pixels""" +//| ... +//| +STATIC mp_obj_t displayio_bitmap_obj_blit(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args){ + enum {ARG_x, ARG_y, ARG_source, ARG_x1, ARG_y1, ARG_x2, ARG_y2, ARG_skip_index}; + static const mp_arg_t allowed_args[] = { + {MP_QSTR_x, MP_ARG_REQUIRED | MP_ARG_INT}, + {MP_QSTR_y, MP_ARG_REQUIRED | MP_ARG_INT}, + {MP_QSTR_source_bitmap, MP_ARG_REQUIRED | MP_ARG_OBJ}, + {MP_QSTR_x1, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} }, + {MP_QSTR_y1, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} }, + {MP_QSTR_x2, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, // None convert to source->width + {MP_QSTR_y2, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, // None convert to source->height + {MP_QSTR_skip_index, MP_ARG_OBJ | MP_ARG_KW_ONLY, {.u_obj=mp_const_none} }, + }; + mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; + mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); + + displayio_bitmap_t *self = MP_OBJ_TO_PTR(pos_args[0]); + + int16_t x = args[ARG_x].u_int; + int16_t y = args[ARG_y].u_int; + + displayio_bitmap_t *source = MP_OBJ_TO_PTR(args[ARG_source].u_obj); + + // ensure that the target bitmap (self) has at least as many `bits_per_value` as the source + if (self->bits_per_value < source->bits_per_value) { + mp_raise_ValueError(translate("source palette too large")); + } + + int16_t x1 = args[ARG_x1].u_int; + int16_t y1 = args[ARG_y1].u_int; + int16_t x2, y2; + // if x2 or y2 is None, then set as the maximum size of the source bitmap + if ( args[ARG_x2].u_obj == mp_const_none ) { + x2 = source->width; + } else { + x2 = mp_obj_get_int(args[ARG_x2].u_obj); + } + //int16_t y2; + if ( args[ARG_y2].u_obj == mp_const_none ) { + y2 = source->height; + } else { + y2 = mp_obj_get_int(args[ARG_y2].u_obj); + } + + // Check x,y are within self (target) bitmap boundary + if ( (x < 0) || (y < 0) || (x > self->width) || (y > self->height) ) { + mp_raise_ValueError(translate("out of range of target")); + } + // Check x1,y1,x2,y2 are within source bitmap boundary + if ( (x1 < 0) || (x1 > source->width) || + (y1 < 0) || (y1 > source->height) || + (x2 < 0) || (x2 > source->width) || + (y2 < 0) || (y2 > source->height) ) { + mp_raise_ValueError(translate("out of range of source")); + } + + // Ensure x1 < x2 and y1 < y2 + if (x1 > x2) { + int16_t temp=x2; + x2=x1; + x1=temp; + } + if (y1 > y2) { + int16_t temp=y2; + y2=y1; + y1=temp; + } + + uint32_t skip_index; + bool skip_index_none; // flag whether skip_value was None + + if (args[ARG_skip_index].u_obj == mp_const_none ) { + skip_index = 0; + skip_index_none = true; + } else { + skip_index = mp_obj_get_int(args[ARG_skip_index].u_obj); + skip_index_none = false; + } + + common_hal_displayio_bitmap_blit(self, x, y, source, x1, y1, x2, y2, skip_index, skip_index_none); + + return mp_const_none; +} +MP_DEFINE_CONST_FUN_OBJ_KW(displayio_bitmap_blit_obj, 4, displayio_bitmap_obj_blit); +// `displayio_bitmap_obj_blit` requires at least 4 arguments + +//| def fill(self, value: Any) -> None: //| """Fills the bitmap with the supplied palette index value.""" //| ... //| @@ -192,6 +294,7 @@ MP_DEFINE_CONST_FUN_OBJ_2(displayio_bitmap_fill_obj, displayio_bitmap_obj_fill); STATIC const mp_rom_map_elem_t displayio_bitmap_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_height), MP_ROM_PTR(&displayio_bitmap_height_obj) }, { MP_ROM_QSTR(MP_QSTR_width), MP_ROM_PTR(&displayio_bitmap_width_obj) }, + { MP_ROM_QSTR(MP_QSTR_blit), MP_ROM_PTR(&displayio_bitmap_blit_obj) }, { MP_ROM_QSTR(MP_QSTR_fill), MP_ROM_PTR(&displayio_bitmap_fill_obj) }, }; diff --git a/shared-bindings/displayio/Bitmap.h b/shared-bindings/displayio/Bitmap.h index 46c337329..00cd98b0a 100644 --- a/shared-bindings/displayio/Bitmap.h +++ b/shared-bindings/displayio/Bitmap.h @@ -40,6 +40,9 @@ uint16_t common_hal_displayio_bitmap_get_height(displayio_bitmap_t *self); uint16_t common_hal_displayio_bitmap_get_width(displayio_bitmap_t *self); uint32_t common_hal_displayio_bitmap_get_bits_per_value(displayio_bitmap_t *self); void common_hal_displayio_bitmap_set_pixel(displayio_bitmap_t *bitmap, int16_t x, int16_t y, uint32_t value); +void common_hal_displayio_bitmap_blit(displayio_bitmap_t *self, int16_t x, int16_t y, displayio_bitmap_t *source, + int16_t x1, int16_t y1, int16_t x2, int16_t y2, + uint32_t skip_index, bool skip_index_none); uint32_t common_hal_displayio_bitmap_get_pixel(displayio_bitmap_t *bitmap, int16_t x, int16_t y); void common_hal_displayio_bitmap_fill(displayio_bitmap_t *bitmap, uint32_t value); diff --git a/shared-bindings/gnss/PositionFix.h b/shared-bindings/gnss/PositionFix.h index 34090872c..0fd595fc6 100644 --- a/shared-bindings/gnss/PositionFix.h +++ b/shared-bindings/gnss/PositionFix.h @@ -13,7 +13,7 @@ typedef enum { POSITIONFIX_3D, } gnss_positionfix_t; -const mp_obj_type_t gnss_positionfix_type; +extern const mp_obj_type_t gnss_positionfix_type; gnss_positionfix_t gnss_positionfix_obj_to_type(mp_obj_t obj); mp_obj_t gnss_positionfix_type_to_obj(gnss_positionfix_t mode); diff --git a/shared-bindings/gnss/SatelliteSystem.h b/shared-bindings/gnss/SatelliteSystem.h index 17f155002..02cd17db2 100644 --- a/shared-bindings/gnss/SatelliteSystem.h +++ b/shared-bindings/gnss/SatelliteSystem.h @@ -16,7 +16,7 @@ typedef enum { SATELLITESYSTEM_QZSS_L1S = (1U << 4), } gnss_satellitesystem_t; -const mp_obj_type_t gnss_satellitesystem_type; +extern const mp_obj_type_t gnss_satellitesystem_type; gnss_satellitesystem_t gnss_satellitesystem_obj_to_type(mp_obj_t obj); mp_obj_t gnss_satellitesystem_type_to_obj(gnss_satellitesystem_t mode); diff --git a/shared-bindings/pulseio/PulseOut.c b/shared-bindings/pulseio/PulseOut.c index 3fd722558..2b787df4f 100644 --- a/shared-bindings/pulseio/PulseOut.c +++ b/shared-bindings/pulseio/PulseOut.c @@ -32,7 +32,7 @@ #include "shared-bindings/microcontroller/Pin.h" #include "shared-bindings/pulseio/PulseOut.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" @@ -41,19 +41,20 @@ //| pulsed signal consists of timed on and off periods. Unlike PWM, there is no set duration //| for on and off pairs.""" //| -//| def __init__(self, carrier: PWMOut) -> None: +//| def __init__(self, carrier: pwmio.PWMOut) -> None: //| """Create a PulseOut object associated with the given PWMout object. //| -//| :param ~pulseio.PWMOut carrier: PWMOut that is set to output on the desired pin. +//| :param ~pwmio.PWMOut carrier: PWMOut that is set to output on the desired pin. //| //| Send a short series of pulses:: //| //| import array //| import pulseio +//| import pwmio //| import board //| //| # 50% duty cycle at 38kHz. -//| pwm = pulseio.PWMOut(board.D13, frequency=38000, duty_cycle=32768) +//| pwm = pwmio.PWMOut(board.D13, frequency=38000, duty_cycle=32768) //| pulse = pulseio.PulseOut(pwm) //| # on off on off on //| pulses = array.array('H', [65000, 1000, 65000, 65000, 1000]) @@ -65,15 +66,14 @@ //| ... //| STATIC mp_obj_t pulseio_pulseout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { - pulseio_pulseout_obj_t *self = m_new_obj(pulseio_pulseout_obj_t); self->base.type = &pulseio_pulseout_type; mp_obj_t carrier_obj = pos_args[0]; - if (MP_OBJ_IS_TYPE(carrier_obj, &pulseio_pwmout_type)) { + if (MP_OBJ_IS_TYPE(carrier_obj, &pwmio_pwmout_type)) { // Use a PWMOut Carrier mp_arg_check_num(n_args, kw_args, 1, 1, false); - common_hal_pulseio_pulseout_construct(self, (pulseio_pwmout_obj_t *)MP_OBJ_TO_PTR(carrier_obj), NULL, 0, 0); + common_hal_pulseio_pulseout_construct(self, (pwmio_pwmout_obj_t *)MP_OBJ_TO_PTR(carrier_obj), NULL, 0, 0); } else { // Use a Pin, frequency, and duty cycle enum { ARG_pin, ARG_frequency}; diff --git a/shared-bindings/pulseio/PulseOut.h b/shared-bindings/pulseio/PulseOut.h index 9d4778e93..49dc555fe 100644 --- a/shared-bindings/pulseio/PulseOut.h +++ b/shared-bindings/pulseio/PulseOut.h @@ -29,12 +29,12 @@ #include "common-hal/microcontroller/Pin.h" #include "common-hal/pulseio/PulseOut.h" -#include "common-hal/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" extern const mp_obj_type_t pulseio_pulseout_type; extern void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pulseio_pwmout_obj_t* carrier, + const pwmio_pwmout_obj_t* carrier, const mcu_pin_obj_t* pin, uint32_t frequency, uint16_t duty_cycle); diff --git a/shared-bindings/pulseio/__init__.c b/shared-bindings/pulseio/__init__.c index 87946e5f0..bfe9635f0 100644 --- a/shared-bindings/pulseio/__init__.c +++ b/shared-bindings/pulseio/__init__.c @@ -33,40 +33,29 @@ #include "shared-bindings/pulseio/__init__.h" #include "shared-bindings/pulseio/PulseIn.h" #include "shared-bindings/pulseio/PulseOut.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" -//| """Support for pulse based protocols +//| """Support for individual pulse based protocols //| //| The `pulseio` module contains classes to provide access to basic pulse IO. +//| Individual pulses are commonly used in infrared remotes and in DHT +//| temperature sensors. +//| +//| +//| .. warning:: PWMOut is moving to `pwmio` and will be removed from `pulseio` +//| in CircuitPython 7. //| - //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either //| call :py:meth:`!deinit` or use a context manager. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| -//| For example:: -//| -//| import pulseio -//| import time -//| from board import * -//| -//| pwm = pulseio.PWMOut(D13) -//| pwm.duty_cycle = 2 ** 15 -//| time.sleep(0.1) -//| -//| This example will initialize the the device, set -//| :py:data:`~pulseio.PWMOut.duty_cycle`, and then sleep 0.1 seconds. -//| CircuitPython will automatically turn off the PWM when it resets all -//| hardware after program completion. Use ``deinit()`` or a ``with`` statement -//| to do it yourself.""" +//| :ref:`lifetime-and-contextmanagers` for more info.""" //| STATIC const mp_rom_map_elem_t pulseio_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_pulseio) }, { MP_ROM_QSTR(MP_QSTR_PulseIn), MP_ROM_PTR(&pulseio_pulsein_type) }, { MP_ROM_QSTR(MP_QSTR_PulseOut), MP_ROM_PTR(&pulseio_pulseout_type) }, - { MP_ROM_QSTR(MP_QSTR_PWMOut), MP_ROM_PTR(&pulseio_pwmout_type) }, + { MP_ROM_QSTR(MP_QSTR_PWMOut), MP_ROM_PTR(&pwmio_pwmout_type) }, }; STATIC MP_DEFINE_CONST_DICT(pulseio_module_globals, pulseio_module_globals_table); diff --git a/shared-bindings/pulseio/PWMOut.c b/shared-bindings/pwmio/PWMOut.c index e9b6c45d2..da0755592 100644 --- a/shared-bindings/pulseio/PWMOut.c +++ b/shared-bindings/pwmio/PWMOut.c @@ -31,7 +31,7 @@ #include "py/runtime.h" #include "shared-bindings/microcontroller/Pin.h" -#include "shared-bindings/pulseio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" @@ -55,33 +55,33 @@ //| //| Simple LED fade:: //| -//| import pulseio +//| import pwmio //| import board //| -//| pwm = pulseio.PWMOut(board.D13) # output on D13 +//| pwm = pwmio.PWMOut(board.D13) # output on D13 //| pwm.duty_cycle = 2 ** 15 # Cycles the pin with 50% duty cycle (half of 2 ** 16) at the default 500hz //| //| PWM at specific frequency (servos and motors):: //| -//| import pulseio +//| import pwmio //| import board //| -//| pwm = pulseio.PWMOut(board.D13, frequency=50) +//| pwm = pwmio.PWMOut(board.D13, frequency=50) //| pwm.duty_cycle = 2 ** 15 # Cycles the pin with 50% duty cycle (half of 2 ** 16) at 50hz //| //| Variable frequency (usually tones):: //| -//| import pulseio +//| import pwmio //| import board //| import time //| -//| pwm = pulseio.PWMOut(board.D13, duty_cycle=2 ** 15, frequency=440, variable_frequency=True) +//| pwm = pwmio.PWMOut(board.D13, duty_cycle=2 ** 15, frequency=440, variable_frequency=True) //| time.sleep(0.2) //| pwm.frequency = 880 //| time.sleep(0.1)""" //| ... //| -STATIC mp_obj_t pulseio_pwmout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { +STATIC mp_obj_t pwmio_pwmout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { enum { ARG_pin, ARG_duty_cycle, ARG_frequency, ARG_variable_frequency }; static const mp_arg_t allowed_args[] = { { MP_QSTR_pin, MP_ARG_REQUIRED | MP_ARG_OBJ, }, @@ -99,9 +99,9 @@ STATIC mp_obj_t pulseio_pwmout_make_new(const mp_obj_type_t *type, size_t n_args bool variable_frequency = parsed_args[ARG_variable_frequency].u_bool; // create PWM object from the given pin - pulseio_pwmout_obj_t *self = m_new_obj(pulseio_pwmout_obj_t); - self->base.type = &pulseio_pwmout_type; - pwmout_result_t result = common_hal_pulseio_pwmout_construct(self, pin, duty_cycle, frequency, variable_frequency); + pwmio_pwmout_obj_t *self = m_new_obj(pwmio_pwmout_obj_t); + self->base.type = &pwmio_pwmout_type; + pwmout_result_t result = common_hal_pwmio_pwmout_construct(self, pin, duty_cycle, frequency, variable_frequency); if (result == PWMOUT_INVALID_PIN) { mp_raise_ValueError(translate("Invalid pin")); } else if (result == PWMOUT_INVALID_FREQUENCY) { @@ -119,15 +119,15 @@ STATIC mp_obj_t pulseio_pwmout_make_new(const mp_obj_type_t *type, size_t n_args //| """Deinitialises the PWMOut and releases any hardware resources for reuse.""" //| ... //| -STATIC mp_obj_t pulseio_pwmout_deinit(mp_obj_t self_in) { - pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); - common_hal_pulseio_pwmout_deinit(self); +STATIC mp_obj_t pwmio_pwmout_deinit(mp_obj_t self_in) { + pwmio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); + common_hal_pwmio_pwmout_deinit(self); return mp_const_none; } -STATIC MP_DEFINE_CONST_FUN_OBJ_1(pulseio_pwmout_deinit_obj, pulseio_pwmout_deinit); +STATIC MP_DEFINE_CONST_FUN_OBJ_1(pwmio_pwmout_deinit_obj, pwmio_pwmout_deinit); -STATIC void check_for_deinit(pulseio_pwmout_obj_t *self) { - if (common_hal_pulseio_pwmout_deinited(self)) { +STATIC void check_for_deinit(pwmio_pwmout_obj_t *self) { + if (common_hal_pwmio_pwmout_deinited(self)) { raise_deinited_error(); } } @@ -143,12 +143,12 @@ STATIC void check_for_deinit(pulseio_pwmout_obj_t *self) { //| :ref:`lifetime-and-contextmanagers` for more info.""" //| ... //| -STATIC mp_obj_t pulseio_pwmout_obj___exit__(size_t n_args, const mp_obj_t *args) { +STATIC mp_obj_t pwmio_pwmout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; - common_hal_pulseio_pwmout_deinit(args[0]); + common_hal_pwmio_pwmout_deinit(args[0]); return mp_const_none; } -STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pulseio_pwmout___exit___obj, 4, 4, pulseio_pwmout_obj___exit__); +STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pwmio_pwmout___exit___obj, 4, 4, pwmio_pwmout_obj___exit__); //| duty_cycle: int //| """16 bit value that dictates how much of one cycle is high (1) versus low @@ -160,29 +160,29 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pulseio_pwmout___exit___obj, 4, 4, pu //| Reading this property will return the value from the internal representation, //| so it may differ from the value set.""" //| -STATIC mp_obj_t pulseio_pwmout_obj_get_duty_cycle(mp_obj_t self_in) { - pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); +STATIC mp_obj_t pwmio_pwmout_obj_get_duty_cycle(mp_obj_t self_in) { + pwmio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); - return MP_OBJ_NEW_SMALL_INT(common_hal_pulseio_pwmout_get_duty_cycle(self)); + return MP_OBJ_NEW_SMALL_INT(common_hal_pwmio_pwmout_get_duty_cycle(self)); } -MP_DEFINE_CONST_FUN_OBJ_1(pulseio_pwmout_get_duty_cycle_obj, pulseio_pwmout_obj_get_duty_cycle); +MP_DEFINE_CONST_FUN_OBJ_1(pwmio_pwmout_get_duty_cycle_obj, pwmio_pwmout_obj_get_duty_cycle); -STATIC mp_obj_t pulseio_pwmout_obj_set_duty_cycle(mp_obj_t self_in, mp_obj_t duty_cycle) { - pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); +STATIC mp_obj_t pwmio_pwmout_obj_set_duty_cycle(mp_obj_t self_in, mp_obj_t duty_cycle) { + pwmio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); mp_int_t duty = mp_obj_get_int(duty_cycle); if (duty < 0 || duty > 0xffff) { mp_raise_ValueError(translate("PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)")); } - common_hal_pulseio_pwmout_set_duty_cycle(self, duty); + common_hal_pwmio_pwmout_set_duty_cycle(self, duty); return mp_const_none; } -MP_DEFINE_CONST_FUN_OBJ_2(pulseio_pwmout_set_duty_cycle_obj, pulseio_pwmout_obj_set_duty_cycle); +MP_DEFINE_CONST_FUN_OBJ_2(pwmio_pwmout_set_duty_cycle_obj, pwmio_pwmout_obj_set_duty_cycle); -const mp_obj_property_t pulseio_pwmout_duty_cycle_obj = { +const mp_obj_property_t pwmio_pwmout_duty_cycle_obj = { .base.type = &mp_type_property, - .proxy = {(mp_obj_t)&pulseio_pwmout_get_duty_cycle_obj, - (mp_obj_t)&pulseio_pwmout_set_duty_cycle_obj, + .proxy = {(mp_obj_t)&pwmio_pwmout_get_duty_cycle_obj, + (mp_obj_t)&pwmio_pwmout_set_duty_cycle_obj, (mp_obj_t)&mp_const_none_obj}, }; @@ -196,50 +196,50 @@ const mp_obj_property_t pulseio_pwmout_duty_cycle_obj = { //| from the original duty cycle value. This should happen without any need //| to manually re-set the duty cycle.""" //| -STATIC mp_obj_t pulseio_pwmout_obj_get_frequency(mp_obj_t self_in) { - pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); +STATIC mp_obj_t pwmio_pwmout_obj_get_frequency(mp_obj_t self_in) { + pwmio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); - return MP_OBJ_NEW_SMALL_INT(common_hal_pulseio_pwmout_get_frequency(self)); + return MP_OBJ_NEW_SMALL_INT(common_hal_pwmio_pwmout_get_frequency(self)); } -MP_DEFINE_CONST_FUN_OBJ_1(pulseio_pwmout_get_frequency_obj, pulseio_pwmout_obj_get_frequency); +MP_DEFINE_CONST_FUN_OBJ_1(pwmio_pwmout_get_frequency_obj, pwmio_pwmout_obj_get_frequency); -STATIC mp_obj_t pulseio_pwmout_obj_set_frequency(mp_obj_t self_in, mp_obj_t frequency) { - pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); +STATIC mp_obj_t pwmio_pwmout_obj_set_frequency(mp_obj_t self_in, mp_obj_t frequency) { + pwmio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); - if (!common_hal_pulseio_pwmout_get_variable_frequency(self)) { + if (!common_hal_pwmio_pwmout_get_variable_frequency(self)) { mp_raise_AttributeError(translate( "PWM frequency not writable when variable_frequency is False on " "construction.")); } - common_hal_pulseio_pwmout_set_frequency(self, mp_obj_get_int(frequency)); + common_hal_pwmio_pwmout_set_frequency(self, mp_obj_get_int(frequency)); return mp_const_none; } -MP_DEFINE_CONST_FUN_OBJ_2(pulseio_pwmout_set_frequency_obj, pulseio_pwmout_obj_set_frequency); +MP_DEFINE_CONST_FUN_OBJ_2(pwmio_pwmout_set_frequency_obj, pwmio_pwmout_obj_set_frequency); -const mp_obj_property_t pulseio_pwmout_frequency_obj = { +const mp_obj_property_t pwmio_pwmout_frequency_obj = { .base.type = &mp_type_property, - .proxy = {(mp_obj_t)&pulseio_pwmout_get_frequency_obj, - (mp_obj_t)&pulseio_pwmout_set_frequency_obj, + .proxy = {(mp_obj_t)&pwmio_pwmout_get_frequency_obj, + (mp_obj_t)&pwmio_pwmout_set_frequency_obj, (mp_obj_t)&mp_const_none_obj}, }; -STATIC const mp_rom_map_elem_t pulseio_pwmout_locals_dict_table[] = { +STATIC const mp_rom_map_elem_t pwmio_pwmout_locals_dict_table[] = { // Methods - { MP_ROM_QSTR(MP_QSTR_deinit), MP_ROM_PTR(&pulseio_pwmout_deinit_obj) }, + { MP_ROM_QSTR(MP_QSTR_deinit), MP_ROM_PTR(&pwmio_pwmout_deinit_obj) }, { MP_ROM_QSTR(MP_QSTR___enter__), MP_ROM_PTR(&default___enter___obj) }, - { MP_ROM_QSTR(MP_QSTR___exit__), MP_ROM_PTR(&pulseio_pwmout___exit___obj) }, + { MP_ROM_QSTR(MP_QSTR___exit__), MP_ROM_PTR(&pwmio_pwmout___exit___obj) }, // Properties - { MP_ROM_QSTR(MP_QSTR_duty_cycle), MP_ROM_PTR(&pulseio_pwmout_duty_cycle_obj) }, - { MP_ROM_QSTR(MP_QSTR_frequency), MP_ROM_PTR(&pulseio_pwmout_frequency_obj) }, + { MP_ROM_QSTR(MP_QSTR_duty_cycle), MP_ROM_PTR(&pwmio_pwmout_duty_cycle_obj) }, + { MP_ROM_QSTR(MP_QSTR_frequency), MP_ROM_PTR(&pwmio_pwmout_frequency_obj) }, // TODO(tannewt): Add enabled to determine whether the signal is output // without giving up the resources. Useful for IR output. }; -STATIC MP_DEFINE_CONST_DICT(pulseio_pwmout_locals_dict, pulseio_pwmout_locals_dict_table); +STATIC MP_DEFINE_CONST_DICT(pwmio_pwmout_locals_dict, pwmio_pwmout_locals_dict_table); -const mp_obj_type_t pulseio_pwmout_type = { +const mp_obj_type_t pwmio_pwmout_type = { { &mp_type_type }, .name = MP_QSTR_PWMOut, - .make_new = pulseio_pwmout_make_new, - .locals_dict = (mp_obj_dict_t*)&pulseio_pwmout_locals_dict, + .make_new = pwmio_pwmout_make_new, + .locals_dict = (mp_obj_dict_t*)&pwmio_pwmout_locals_dict, }; diff --git a/shared-bindings/pulseio/PWMOut.h b/shared-bindings/pwmio/PWMOut.h index c72278e0e..1a99914ea 100644 --- a/shared-bindings/pulseio/PWMOut.h +++ b/shared-bindings/pwmio/PWMOut.h @@ -24,13 +24,13 @@ * THE SOFTWARE. */ -#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_PULSEIO_PWMOUT_H -#define MICROPY_INCLUDED_SHARED_BINDINGS_PULSEIO_PWMOUT_H +#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_PWMIO_PWMOUT_H +#define MICROPY_INCLUDED_SHARED_BINDINGS_PWMIO_PWMOUT_H #include "common-hal/microcontroller/Pin.h" -#include "common-hal/pulseio/PWMOut.h" +#include "common-hal/pwmio/PWMOut.h" -extern const mp_obj_type_t pulseio_pwmout_type; +extern const mp_obj_type_t pwmio_pwmout_type; typedef enum { PWMOUT_OK, @@ -40,19 +40,19 @@ typedef enum { PWMOUT_ALL_TIMERS_IN_USE } pwmout_result_t; -extern pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self, +extern pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t* self, const mcu_pin_obj_t* pin, uint16_t duty, uint32_t frequency, bool variable_frequency); -extern void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self); -extern bool common_hal_pulseio_pwmout_deinited(pulseio_pwmout_obj_t* self); -extern void common_hal_pulseio_pwmout_set_duty_cycle(pulseio_pwmout_obj_t* self, uint16_t duty); -extern uint16_t common_hal_pulseio_pwmout_get_duty_cycle(pulseio_pwmout_obj_t* self); -extern void common_hal_pulseio_pwmout_set_frequency(pulseio_pwmout_obj_t* self, uint32_t frequency); -extern uint32_t common_hal_pulseio_pwmout_get_frequency(pulseio_pwmout_obj_t* self); -extern bool common_hal_pulseio_pwmout_get_variable_frequency(pulseio_pwmout_obj_t* self); +extern void common_hal_pwmio_pwmout_deinit(pwmio_pwmout_obj_t* self); +extern bool common_hal_pwmio_pwmout_deinited(pwmio_pwmout_obj_t* self); +extern void common_hal_pwmio_pwmout_set_duty_cycle(pwmio_pwmout_obj_t* self, uint16_t duty); +extern uint16_t common_hal_pwmio_pwmout_get_duty_cycle(pwmio_pwmout_obj_t* self); +extern void common_hal_pwmio_pwmout_set_frequency(pwmio_pwmout_obj_t* self, uint32_t frequency); +extern uint32_t common_hal_pwmio_pwmout_get_frequency(pwmio_pwmout_obj_t* self); +extern bool common_hal_pwmio_pwmout_get_variable_frequency(pwmio_pwmout_obj_t* self); // This is used by the supervisor to claim PWMOut devices indefinitely. -extern void common_hal_pulseio_pwmout_never_reset(pulseio_pwmout_obj_t *self); -extern void common_hal_pulseio_pwmout_reset_ok(pulseio_pwmout_obj_t *self); +extern void common_hal_pwmio_pwmout_never_reset(pwmio_pwmout_obj_t *self); +extern void common_hal_pwmio_pwmout_reset_ok(pwmio_pwmout_obj_t *self); -#endif // MICROPY_INCLUDED_SHARED_BINDINGS_PULSEIO_PWMOUT_H +#endif // MICROPY_INCLUDED_SHARED_BINDINGS_PWMIO_PWMOUT_H diff --git a/shared-bindings/pwmio/__init__.c b/shared-bindings/pwmio/__init__.c new file mode 100644 index 000000000..a51383703 --- /dev/null +++ b/shared-bindings/pwmio/__init__.c @@ -0,0 +1,73 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2016 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <stdint.h> + +#include "py/obj.h" +#include "py/runtime.h" + +#include "shared-bindings/microcontroller/Pin.h" +#include "shared-bindings/pwmio/__init__.h" +#include "shared-bindings/pwmio/PWMOut.h" + +//| """Support for PWM based protocols +//| +//| The `pwmio` module contains classes to provide access to basic pulse IO. +//| + +//| All classes change hardware state and should be deinitialized when they +//| are no longer needed if the program continues after use. To do so, either +//| call :py:meth:`!deinit` or use a context manager. See +//| :ref:`lifetime-and-contextmanagers` for more info. +//| +//| For example:: +//| +//| import pwmio +//| import time +//| from board import * +//| +//| pwm = pwmio.PWMOut(D13) +//| pwm.duty_cycle = 2 ** 15 +//| time.sleep(0.1) +//| +//| This example will initialize the the device, set +//| :py:data:`~pwmio.PWMOut.duty_cycle`, and then sleep 0.1 seconds. +//| CircuitPython will automatically turn off the PWM when it resets all +//| hardware after program completion. Use ``deinit()`` or a ``with`` statement +//| to do it yourself.""" +//| + +STATIC const mp_rom_map_elem_t pwmio_module_globals_table[] = { + { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_pwmio) }, + { MP_ROM_QSTR(MP_QSTR_PWMOut), MP_ROM_PTR(&pwmio_pwmout_type) }, +}; + +STATIC MP_DEFINE_CONST_DICT(pwmio_module_globals, pwmio_module_globals_table); + +const mp_obj_module_t pwmio_module = { + .base = { &mp_type_module }, + .globals = (mp_obj_dict_t*)&pwmio_module_globals, +}; diff --git a/shared-bindings/pwmio/__init__.h b/shared-bindings/pwmio/__init__.h new file mode 100644 index 000000000..93c70377d --- /dev/null +++ b/shared-bindings/pwmio/__init__.h @@ -0,0 +1,34 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2016 Scott Shawcroft + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_PWMIO___INIT___H +#define MICROPY_INCLUDED_SHARED_BINDINGS_PWMIO___INIT___H + +#include "py/obj.h" + +// Nothing now. + +#endif // MICROPY_INCLUDED_SHARED_BINDINGS_PWMIO___INIT___H diff --git a/shared-bindings/watchdog/WatchDogMode.h b/shared-bindings/watchdog/WatchDogMode.h index 68022671f..fb09445a9 100644 --- a/shared-bindings/watchdog/WatchDogMode.h +++ b/shared-bindings/watchdog/WatchDogMode.h @@ -35,7 +35,7 @@ typedef enum { WATCHDOGMODE_RESET, } watchdog_watchdogmode_t; -const mp_obj_type_t watchdog_watchdogmode_type; +extern const mp_obj_type_t watchdog_watchdogmode_type; watchdog_watchdogmode_t watchdog_watchdogmode_obj_to_type(mp_obj_t obj); mp_obj_t watchdog_watchdogmode_type_to_obj(watchdog_watchdogmode_t mode); diff --git a/shared-module/displayio/Bitmap.c b/shared-module/displayio/Bitmap.c index 8bcda6086..d1942efc7 100644 --- a/shared-module/displayio/Bitmap.c +++ b/shared-module/displayio/Bitmap.c @@ -105,6 +105,32 @@ uint32_t common_hal_displayio_bitmap_get_pixel(displayio_bitmap_t *self, int16_t return 0; } +void common_hal_displayio_bitmap_blit(displayio_bitmap_t *self, int16_t x, int16_t y, displayio_bitmap_t *source, + int16_t x1, int16_t y1, int16_t x2, int16_t y2, uint32_t skip_index, bool skip_index_none) { + // Copy complete "source" bitmap into "self" bitmap at location x,y in the "self" + // Add a boolean to determine if all values are copied, or only if non-zero + // If skip_value is encountered in the source bitmap, it will not be copied. + // If skip_value is `None`, then all pixels are copied. + + if (self->read_only) { + mp_raise_RuntimeError(translate("Read-only object")); + } + + // simplest version - use internal functions for get/set pixels + for (int16_t i=0; i < (x2-x1) ; i++) { + if ( (x+i >= 0) && (x+i < self->width) ) { + for (int16_t j=0; j < (y2-y1) ; j++){ + if ((y+j >= 0) && (y+j < self->height) ) { + uint32_t value = common_hal_displayio_bitmap_get_pixel(source, x1+i, y1+j); + if ( (skip_index_none) || (value != skip_index) ) { // write if skip_value_none is True + common_hal_displayio_bitmap_set_pixel(self, x+i, y+j, value); + } + } + } + } + } +} + void common_hal_displayio_bitmap_set_pixel(displayio_bitmap_t *self, int16_t x, int16_t y, uint32_t value) { if (self->read_only) { mp_raise_RuntimeError(translate("Read-only object")); diff --git a/shared-module/displayio/Display.c b/shared-module/displayio/Display.c index 46bb6fdb5..4f92f249f 100644 --- a/shared-module/displayio/Display.c +++ b/shared-module/displayio/Display.c @@ -111,14 +111,14 @@ void common_hal_displayio_display_construct(displayio_display_obj_t* self, if (backlight_pin != NULL && common_hal_mcu_pin_is_free(backlight_pin)) { // Avoid PWM types and functions when the module isn't enabled #if (CIRCUITPY_PULSEIO) - pwmout_result_t result = common_hal_pulseio_pwmout_construct(&self->backlight_pwm, backlight_pin, 0, 50000, false); + pwmout_result_t result = common_hal_pwmio_pwmout_construct(&self->backlight_pwm, backlight_pin, 0, 50000, false); if (result != PWMOUT_OK) { self->backlight_inout.base.type = &digitalio_digitalinout_type; common_hal_digitalio_digitalinout_construct(&self->backlight_inout, backlight_pin); common_hal_never_reset_pin(backlight_pin); } else { - self->backlight_pwm.base.type = &pulseio_pwmout_type; - common_hal_pulseio_pwmout_never_reset(&self->backlight_pwm); + self->backlight_pwm.base.type = &pwmio_pwmout_type; + common_hal_pwmio_pwmout_never_reset(&self->backlight_pwm); } #else // Otherwise default to digital @@ -173,14 +173,14 @@ bool common_hal_displayio_display_set_brightness(displayio_display_obj_t* self, // Avoid PWM types and functions when the module isn't enabled #if (CIRCUITPY_PULSEIO) - bool ispwm = (self->backlight_pwm.base.type == &pulseio_pwmout_type) ? true : false; + bool ispwm = (self->backlight_pwm.base.type == &pwmio_pwmout_type) ? true : false; #else bool ispwm = false; #endif if (ispwm) { #if (CIRCUITPY_PULSEIO) - common_hal_pulseio_pwmout_set_duty_cycle(&self->backlight_pwm, (uint16_t) (0xffff * brightness)); + common_hal_pwmio_pwmout_set_duty_cycle(&self->backlight_pwm, (uint16_t) (0xffff * brightness)); ok = true; #else ok = false; @@ -419,9 +419,9 @@ void release_display(displayio_display_obj_t* self) { common_hal_displayio_display_set_auto_refresh(self, false); release_display_core(&self->core); #if (CIRCUITPY_PULSEIO) - if (self->backlight_pwm.base.type == &pulseio_pwmout_type) { - common_hal_pulseio_pwmout_reset_ok(&self->backlight_pwm); - common_hal_pulseio_pwmout_deinit(&self->backlight_pwm); + if (self->backlight_pwm.base.type == &pwmio_pwmout_type) { + common_hal_pwmio_pwmout_reset_ok(&self->backlight_pwm); + common_hal_pwmio_pwmout_deinit(&self->backlight_pwm); } else if (self->backlight_inout.base.type == &digitalio_digitalinout_type) { common_hal_digitalio_digitalinout_deinit(&self->backlight_inout); } diff --git a/shared-module/displayio/Display.h b/shared-module/displayio/Display.h index 861a38fd7..bdb861aa0 100644 --- a/shared-module/displayio/Display.h +++ b/shared-module/displayio/Display.h @@ -29,8 +29,8 @@ #include "shared-bindings/digitalio/DigitalInOut.h" #include "shared-bindings/displayio/Group.h" -#if CIRCUITPY_PULSEIO -#include "shared-bindings/pulseio/PWMOut.h" +#if CIRCUITPY_PWMIO +#include "shared-bindings/pwmio/PWMOut.h" #endif #include "shared-module/displayio/area.h" @@ -41,8 +41,8 @@ typedef struct { displayio_display_core_t core; union { digitalio_digitalinout_obj_t backlight_inout; - #if CIRCUITPY_PULSEIO - pulseio_pwmout_obj_t backlight_pwm; + #if CIRCUITPY_PWMIO + pwmio_pwmout_obj_t backlight_pwm; #endif }; uint64_t last_backlight_refresh; diff --git a/shared-module/displayio/__init__.c b/shared-module/displayio/__init__.c index 4a6428ea0..101dac4b3 100644 --- a/shared-module/displayio/__init__.c +++ b/shared-module/displayio/__init__.c @@ -394,8 +394,8 @@ primary_display_t *allocate_display_or_raise(void) { } primary_display_t *allocate_display_bus(void) { for (uint8_t i = 0; i < CIRCUITPY_DISPLAY_LIMIT; i++) { - mp_const_obj_t display_type = displays[i].display.base.type; - if (display_type == NULL || display_type == &mp_type_NoneType) { + mp_const_obj_t display_bus_type = displays[i].bus_base.type; + if (display_bus_type == NULL || display_bus_type == &mp_type_NoneType) { return &displays[i]; } } diff --git a/shared-module/framebufferio/FramebufferDisplay.h b/shared-module/framebufferio/FramebufferDisplay.h index 89df0d27c..d73d4b9a9 100644 --- a/shared-module/framebufferio/FramebufferDisplay.h +++ b/shared-module/framebufferio/FramebufferDisplay.h @@ -33,7 +33,6 @@ #include "shared-bindings/digitalio/DigitalInOut.h" #include "shared-bindings/displayio/Group.h" -#include "shared-bindings/pulseio/PWMOut.h" #include "shared-module/displayio/area.h" #include "shared-module/displayio/display_core.h" diff --git a/supervisor/shared/micropython.c b/supervisor/shared/micropython.c index 245db11d4..bbc4807f9 100644 --- a/supervisor/shared/micropython.c +++ b/supervisor/shared/micropython.c @@ -29,14 +29,24 @@ #include "supervisor/serial.h" #include "lib/oofatfs/ff.h" #include "py/mpconfig.h" +#include "py/mpstate.h" +#include "py/runtime.h" #include "supervisor/shared/status_leds.h" +#if CIRCUITPY_WATCHDOG +#include "shared-bindings/watchdog/__init__.h" +#define WATCHDOG_EXCEPTION_CHECK() (MP_STATE_VM(mp_pending_exception) == &mp_watchdog_timeout_exception) +#else +#define WATCHDOG_EXCEPTION_CHECK() 0 +#endif + int mp_hal_stdin_rx_chr(void) { for (;;) { #ifdef MICROPY_VM_HOOK_LOOP MICROPY_VM_HOOK_LOOP #endif + mp_handle_pending(); if (serial_bytes_available()) { toggle_rx_led(); return serial_read(); diff --git a/supervisor/shared/rgb_led_status.c b/supervisor/shared/rgb_led_status.c index 2f23e3125..283b9da12 100644 --- a/supervisor/shared/rgb_led_status.c +++ b/supervisor/shared/rgb_led_status.c @@ -66,22 +66,22 @@ busio_spi_obj_t status_apa102 = { #if defined(CP_RGB_STATUS_R) || defined(CP_RGB_STATUS_G) || defined(CP_RGB_STATUS_B) #define CP_RGB_STATUS_LED -#include "shared-bindings/pulseio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" #include "shared-bindings/microcontroller/Pin.h" -pulseio_pwmout_obj_t rgb_status_r = { +pwmio_pwmout_obj_t rgb_status_r = { .base = { - .type = &pulseio_pwmout_type, + .type = &pwmio_pwmout_type, }, }; -pulseio_pwmout_obj_t rgb_status_g = { +pwmio_pwmout_obj_t rgb_status_g = { .base = { - .type = &pulseio_pwmout_type, + .type = &pwmio_pwmout_type, }, }; -pulseio_pwmout_obj_t rgb_status_b = { +pwmio_pwmout_obj_t rgb_status_b = { .base = { - .type = &pulseio_pwmout_type, + .type = &pwmio_pwmout_type, }, }; @@ -147,26 +147,26 @@ void rgb_led_status_init() { #if defined(CP_RGB_STATUS_LED) if (common_hal_mcu_pin_is_free(CP_RGB_STATUS_R)) { - pwmout_result_t red_result = common_hal_pulseio_pwmout_construct(&rgb_status_r, CP_RGB_STATUS_R, 0, 50000, false); + pwmout_result_t red_result = common_hal_pwmio_pwmout_construct(&rgb_status_r, CP_RGB_STATUS_R, 0, 50000, false); if (PWMOUT_OK == red_result) { - common_hal_pulseio_pwmout_never_reset(&rgb_status_r); + common_hal_pwmio_pwmout_never_reset(&rgb_status_r); } } if (common_hal_mcu_pin_is_free(CP_RGB_STATUS_G)) { - pwmout_result_t green_result = common_hal_pulseio_pwmout_construct(&rgb_status_g, CP_RGB_STATUS_G, 0, 50000, false); + pwmout_result_t green_result = common_hal_pwmio_pwmout_construct(&rgb_status_g, CP_RGB_STATUS_G, 0, 50000, false); if (PWMOUT_OK == green_result) { - common_hal_pulseio_pwmout_never_reset(&rgb_status_g); + common_hal_pwmio_pwmout_never_reset(&rgb_status_g); } } if (common_hal_mcu_pin_is_free(CP_RGB_STATUS_B)) { - pwmout_result_t blue_result = common_hal_pulseio_pwmout_construct(&rgb_status_b, CP_RGB_STATUS_B, 0, 50000, false); + pwmout_result_t blue_result = common_hal_pwmio_pwmout_construct(&rgb_status_b, CP_RGB_STATUS_B, 0, 50000, false); if (PWMOUT_OK == blue_result) { - common_hal_pulseio_pwmout_never_reset(&rgb_status_b); + common_hal_pwmio_pwmout_never_reset(&rgb_status_b); } } #endif @@ -242,9 +242,9 @@ void new_status_color(uint32_t rgb) { status_rgb_color[2] = (uint16_t) (blue_u8 << 8) + blue_u8; #endif - common_hal_pulseio_pwmout_set_duty_cycle(&rgb_status_r, status_rgb_color[0]); - common_hal_pulseio_pwmout_set_duty_cycle(&rgb_status_g, status_rgb_color[1]); - common_hal_pulseio_pwmout_set_duty_cycle(&rgb_status_b, status_rgb_color[2]); + common_hal_pwmio_pwmout_set_duty_cycle(&rgb_status_r, status_rgb_color[0]); + common_hal_pwmio_pwmout_set_duty_cycle(&rgb_status_g, status_rgb_color[1]); + common_hal_pwmio_pwmout_set_duty_cycle(&rgb_status_b, status_rgb_color[2]); #endif } @@ -288,9 +288,9 @@ void temp_status_color(uint32_t rgb) { temp_status_color_rgb[2] = (uint16_t) (blue_u8 << 8) + blue_u8; #endif - common_hal_pulseio_pwmout_set_duty_cycle(&rgb_status_r, temp_status_color_rgb[0]); - common_hal_pulseio_pwmout_set_duty_cycle(&rgb_status_g, temp_status_color_rgb[1]); - common_hal_pulseio_pwmout_set_duty_cycle(&rgb_status_b, temp_status_color_rgb[2]); + common_hal_pwmio_pwmout_set_duty_cycle(&rgb_status_r, temp_status_color_rgb[0]); + common_hal_pwmio_pwmout_set_duty_cycle(&rgb_status_g, temp_status_color_rgb[1]); + common_hal_pwmio_pwmout_set_duty_cycle(&rgb_status_b, temp_status_color_rgb[2]); #endif } @@ -327,9 +327,9 @@ void clear_temp_status() { blue = status_rgb_color[2]; #endif - common_hal_pulseio_pwmout_set_duty_cycle(&rgb_status_r, red); - common_hal_pulseio_pwmout_set_duty_cycle(&rgb_status_g, green); - common_hal_pulseio_pwmout_set_duty_cycle(&rgb_status_b, blue); + common_hal_pwmio_pwmout_set_duty_cycle(&rgb_status_r, red); + common_hal_pwmio_pwmout_set_duty_cycle(&rgb_status_g, green); + common_hal_pwmio_pwmout_set_duty_cycle(&rgb_status_b, blue); #endif } diff --git a/supervisor/shared/tick.c b/supervisor/shared/tick.c index 58c9e7f64..91ffa307d 100644 --- a/supervisor/shared/tick.c +++ b/supervisor/shared/tick.c @@ -27,6 +27,7 @@ #include "supervisor/shared/tick.h" #include "py/mpstate.h" +#include "py/runtime.h" #include "supervisor/linker.h" #include "supervisor/filesystem.h" #include "supervisor/background_callback.h" @@ -149,17 +150,7 @@ void mp_hal_delay_ms(mp_uint_t delay) { while (remaining > 0) { RUN_BACKGROUND_TASKS; // Check to see if we've been CTRL-Ced by autoreload or the user. - if(MP_STATE_VM(mp_pending_exception) == MP_OBJ_FROM_PTR(&MP_STATE_VM(mp_kbd_exception))) - { - // clear exception and generate stacktrace - MP_STATE_VM(mp_pending_exception) = MP_OBJ_NULL; - nlr_raise(&MP_STATE_VM(mp_kbd_exception)); - } - if( MP_STATE_VM(mp_pending_exception) == MP_OBJ_FROM_PTR(&MP_STATE_VM(mp_reload_exception)) || - WATCHDOG_EXCEPTION_CHECK()) { - // stop sleeping immediately - break; - } + mp_handle_pending(); remaining = end_tick - port_get_raw_ticks(NULL); // We break a bit early so we don't risk setting the alarm before the time when we call // sleep. diff --git a/tools/gen_usb_descriptor.py b/tools/gen_usb_descriptor.py index baee8cad7..adf0d8270 100644 --- a/tools/gen_usb_descriptor.py +++ b/tools/gen_usb_descriptor.py @@ -382,8 +382,9 @@ if args.max_ep != 0: for interface in interfaces: for subdescriptor in interface.subdescriptors: endpoint_address = getattr(subdescriptor, 'bEndpointAddress', 0) & 0x7f - if endpoint_address > args.max_ep: - raise ValueError("Endpoint address %d of %s may not exceed %d" % (endpoint_address & 0x7f, interface.description, args.max_ep)) + print("Endpoint %d - vs max_ep %d" % (endpoint_address, args.max_ep)) + if endpoint_address >= args.max_ep: + raise ValueError("Endpoint address %d of %s must be less than %d" % (endpoint_address & 0x7f, interface.description, args.max_ep)) else: print("Unable to check whether maximum number of endpoints is respected", file=sys.stderr) diff --git a/tools/mpconfig_category_reader.py b/tools/mpconfig_category_reader.py new file mode 100644 index 000000000..2f813931e --- /dev/null +++ b/tools/mpconfig_category_reader.py @@ -0,0 +1,31 @@ +filepath = '../py/circuitpy_mpconfig.mk' +with open(filepath) as fp: + line = fp.readline() + cnt = 1 + fullbuild = [] + defon = [] + defoff = [] + while line: + wordlist = line.split() + if wordlist: + if wordlist[-1] == "$(CIRCUITPY_FULL_BUILD)": + fullbuild.append(wordlist[0]) + elif wordlist[-1] == "0": + defoff.append(wordlist[0]) + elif wordlist[-1] == "1": + defon.append(wordlist[0]) + line = fp.readline() + cnt += 1 + + print(str(cnt) + " Lines Read\n") + print("\nFULL BUILDS ------------------------") + for string in fullbuild: + print(string) + + print("\nON BUILDS ------------------------") + for string in defon: + print(string) + + print("\nOFF BUILDS ------------------------") + for string in defoff: + print(string) |