diff options
70 files changed, 1041 insertions, 146 deletions
diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index eaecd2fa4..b3455cb53 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -180,6 +180,7 @@ jobs: - "arduino_zero" - "bast_pro_mini_m0" - "bdmicro_vina_d21" + - "bdmicro_vina_d51" - "bless_dev_board_multi_sensor" - "blm_badge" - "capablerobot_usbhub" @@ -197,6 +198,8 @@ jobs: - "datum_imu" - "datum_light" - "datum_weather" + - "dynossat_edu_eps" + - "dynossat_edu_obc" - "electronut_labs_blip" - "electronut_labs_papyr" - "escornabot_makech" diff --git a/devices/ble_hci/common-hal/_bleio/Adapter.c b/devices/ble_hci/common-hal/_bleio/Adapter.c index 559b586de..753a88648 100644 --- a/devices/ble_hci/common-hal/_bleio/Adapter.c +++ b/devices/ble_hci/common-hal/_bleio/Adapter.c @@ -45,7 +45,6 @@ #include "shared-bindings/_bleio/Address.h" #include "shared-bindings/_bleio/Characteristic.h" #include "shared-bindings/_bleio/Service.h" -#include "shared-bindings/nvm/ByteArray.h" #include "shared-bindings/_bleio/Connection.h" #include "shared-bindings/_bleio/ScanEntry.h" #include "shared-bindings/time/__init__.h" diff --git a/devices/ble_hci/common-hal/_bleio/hci_include/att_internal.h b/devices/ble_hci/common-hal/_bleio/hci_include/att_internal.h index 1c75275da..d6a4cb79c 100644 --- a/devices/ble_hci/common-hal/_bleio/hci_include/att_internal.h +++ b/devices/ble_hci/common-hal/_bleio/hci_include/att_internal.h @@ -11,7 +11,7 @@ #include <stdbool.h> // for __packed -#include <string.h> +#include <sys/cdefs.h> #define BT_EATT_PSM 0x27 #define BT_ATT_DEFAULT_LE_MTU 23 diff --git a/devices/ble_hci/common-hal/_bleio/hci_include/hci.h b/devices/ble_hci/common-hal/_bleio/hci_include/hci.h index 6c3a2b5bd..5213edbf0 100644 --- a/devices/ble_hci/common-hal/_bleio/hci_include/hci.h +++ b/devices/ble_hci/common-hal/_bleio/hci_include/hci.h @@ -12,10 +12,15 @@ #define ZEPHYR_INCLUDE_BLUETOOTH_HCI_H_ #include <stdbool.h> -#include <string.h> +// for __packed +#include <sys/cdefs.h> + #include "addr.h" +// ESP32S2 build environment defines this already. +#ifndef BIT #define BIT(n) (1UL << (n)) +#endif /* Special own address types for LL privacy (used in adv & scan parameters) */ #define BT_HCI_OWN_ADDR_RPA_OR_PUBLIC 0x02 diff --git a/locale/ID.po b/locale/ID.po index 76e83920c..f35afea66 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: 2020-10-10 23:51+0000\n" "Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -251,6 +251,10 @@ msgid "'return' outside function" msgstr "'return' diluar fungsi" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "'yield' diluar fungsi" @@ -293,6 +297,7 @@ msgid "All I2C peripherals are in use" msgstr "Semua perangkat I2C sedang digunakan" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -914,6 +919,7 @@ msgid "File exists" msgstr "File sudah ada" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -951,7 +957,8 @@ msgid "Group full" msgstr "Grup penuh" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "Perangkat keras sibuk, coba pin alternatif" @@ -959,6 +966,10 @@ msgstr "Perangkat keras sibuk, coba pin alternatif" msgid "Hardware in use, try alternative pins" msgstr "Perangkat keras sedang digunakan, coba pin alternatif" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "operasi I/O pada file tertutup" @@ -1023,7 +1034,8 @@ msgid "Invalid %q pin" msgstr "%q pada tidak valid" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -1039,6 +1051,7 @@ msgstr "File BMP tidak valid" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "Pin DAC yang diberikan tidak valid" @@ -1250,7 +1263,6 @@ msgid "No CCCD for this Characteristic" msgstr "Tidak ada CCCD untuk Karakteristik ini" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip" @@ -2767,6 +2779,10 @@ msgstr "format tidak valid" msgid "invalid format specifier" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "key tidak valid" @@ -3475,6 +3491,10 @@ msgstr "" msgid "type object '%q' has no attribute '%q'" msgstr "" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "" diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 35143e04e..7bd1dfa2a 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -947,6 +947,10 @@ msgstr "" msgid "Hardware in use, try alternative pins" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" @@ -2732,6 +2736,10 @@ msgstr "" msgid "invalid format specifier" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index a099e1c94..d7caa43ea 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: 2020-05-24 03:22+0000\n" "Last-Translator: dronecz <mzuzelka@gmail.com>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -251,6 +251,10 @@ msgid "'return' outside function" msgstr "" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "" @@ -293,6 +297,7 @@ msgid "All I2C peripherals are in use" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -900,6 +905,7 @@ msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -936,7 +942,8 @@ msgid "Group full" msgstr "" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "" @@ -944,6 +951,10 @@ msgstr "" msgid "Hardware in use, try alternative pins" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" @@ -1006,7 +1017,8 @@ msgid "Invalid %q pin" msgstr "" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -1022,6 +1034,7 @@ msgstr "" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "" @@ -1233,7 +1246,6 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "" @@ -2724,6 +2736,10 @@ msgstr "" msgid "invalid format specifier" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "" @@ -3430,6 +3446,10 @@ msgstr "" msgid "type object '%q' has no attribute '%q'" msgstr "" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 5084ca505..89969e874 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: 2020-06-16 18:24+0000\n" "Last-Translator: Andreas Buchen <andreas.buchen@gmail.com>\n" "Language: de_DE\n" @@ -250,6 +250,10 @@ msgid "'return' outside function" msgstr "'return' außerhalb einer Funktion" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "'yield' außerhalb einer Funktion" @@ -292,6 +296,7 @@ msgid "All I2C peripherals are in use" msgstr "Alle I2C-Peripheriegeräte sind in Benutzung" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -911,6 +916,7 @@ msgid "File exists" msgstr "Datei existiert" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -951,7 +957,8 @@ msgid "Group full" msgstr "Gruppe voll" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "Hardware beschäftigt, versuchen Sie alternative Pins" @@ -959,6 +966,10 @@ msgstr "Hardware beschäftigt, versuchen Sie alternative Pins" msgid "Hardware in use, try alternative pins" msgstr "Hardware in benutzung, probiere alternative Pins" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "Lese/Schreibe-operation an geschlossener Datei" @@ -1023,7 +1034,8 @@ msgid "Invalid %q pin" msgstr "Ungültiger %q pin" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -1039,6 +1051,7 @@ msgstr "Ungültige BMP-Datei" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "Ungültiger DAC-Pin angegeben" @@ -1252,7 +1265,6 @@ msgid "No CCCD for this Characteristic" msgstr "Kein CCCD für diese Charakteristik" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Kein DAC im Chip vorhanden" @@ -2795,6 +2807,10 @@ msgstr "ungültiges Format" msgid "invalid format specifier" msgstr "ungültiger Formatbezeichner" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "ungültiger Schlüssel" @@ -3514,6 +3530,10 @@ msgstr "Typ ist kein akzeptierter Basis-Typ" msgid "type object '%q' has no attribute '%q'" msgstr "Typ vom Objekt '%q' hat kein Attribut '%q'" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "Typ akzeptiert 1 oder 3 Argumente" diff --git a/locale/el.po b/locale/el.po index 32e08a550..42b083e3c 100644 --- a/locale/el.po +++ b/locale/el.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -246,6 +246,10 @@ msgid "'return' outside function" msgstr "" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "" @@ -288,6 +292,7 @@ msgid "All I2C peripherals are in use" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -895,6 +900,7 @@ msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -931,7 +937,8 @@ msgid "Group full" msgstr "" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "" @@ -939,6 +946,10 @@ msgstr "" msgid "Hardware in use, try alternative pins" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" @@ -1001,7 +1012,8 @@ msgid "Invalid %q pin" msgstr "" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -1017,6 +1029,7 @@ msgstr "" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "" @@ -1228,7 +1241,6 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "" @@ -2719,6 +2731,10 @@ msgstr "" msgid "invalid format specifier" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "" @@ -3425,6 +3441,10 @@ msgstr "" msgid "type object '%q' has no attribute '%q'" msgstr "" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "" diff --git a/locale/es.po b/locale/es.po index 3a7e1c682..16254aa5e 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: 2020-10-09 17:19+0000\n" "Last-Translator: dherrada <dylan.herrada@adafruit.com>\n" "Language-Team: \n" @@ -254,6 +254,10 @@ msgid "'return' outside function" msgstr "'return' fuera de una función" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "'yield' fuera de una función" @@ -296,6 +300,7 @@ msgid "All I2C peripherals are in use" msgstr "Todos los periféricos I2C están siendo usados" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "Todos los FIFOs de RX en uso" @@ -915,6 +920,7 @@ msgid "File exists" msgstr "El archivo ya existe" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "Filtros muy complejos" @@ -952,7 +958,8 @@ msgid "Group full" msgstr "Group lleno" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "Hardware ocupado, pruebe pines alternativos" @@ -960,6 +967,10 @@ msgstr "Hardware ocupado, pruebe pines alternativos" msgid "Hardware in use, try alternative pins" msgstr "Hardware en uso, pruebe pines alternativos" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "Operación I/O en archivo cerrado" @@ -1024,7 +1035,8 @@ msgid "Invalid %q pin" msgstr "Pin %q inválido" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "selección inválida de pin %q" @@ -1040,6 +1052,7 @@ msgstr "Archivo BMP inválido" msgid "Invalid BSSID" msgstr "BSSID inválido" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "Pin suministrado inválido para DAC" @@ -1251,7 +1264,6 @@ msgid "No CCCD for this Characteristic" msgstr "No hay CCCD para esta característica" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "El chip no tiene DAC" @@ -2789,6 +2801,10 @@ msgstr "formato inválido" msgid "invalid format specifier" msgstr "especificador de formato inválido" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "llave inválida" @@ -3504,6 +3520,10 @@ msgstr "type no es un tipo de base aceptable" msgid "type object '%q' has no attribute '%q'" msgstr "objeto de tipo '%q' no tiene atributo '%q'" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "type acepta 1 ó 3 argumentos" diff --git a/locale/fil.po b/locale/fil.po index 4e7ce9ed8..ecda65cb2 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy <me@timothygarcia.ca>\n" "Language-Team: fil\n" @@ -248,6 +248,10 @@ msgid "'return' outside function" msgstr "'return' sa labas ng function" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "'yield' sa labas ng function" @@ -290,6 +294,7 @@ msgid "All I2C peripherals are in use" msgstr "Lahat ng I2C peripherals ginagamit" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -908,6 +913,7 @@ msgid "File exists" msgstr "Mayroong file" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -944,7 +950,8 @@ msgid "Group full" msgstr "Puno ang group" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "" @@ -952,6 +959,10 @@ msgstr "" msgid "Hardware in use, try alternative pins" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "I/O operasyon sa saradong file" @@ -1016,7 +1027,8 @@ msgid "Invalid %q pin" msgstr "Mali ang %q pin" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -1032,6 +1044,7 @@ msgstr "Mali ang BMP file" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "" @@ -1243,7 +1256,6 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Walang DAC sa chip" @@ -2764,6 +2776,10 @@ msgstr "hindi wastong pag-format" msgid "invalid format specifier" msgstr "mali ang format specifier" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "mali ang key" @@ -3480,6 +3496,10 @@ msgstr "hindi puede ang type para sa base type" msgid "type object '%q' has no attribute '%q'" msgstr "type object '%q' ay walang attribute '%q'" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "type kumuhuha ng 1 o 3 arguments" diff --git a/locale/fr.po b/locale/fr.po index 45a4cc25d..482fd2809 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,9 +7,9 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" -"PO-Revision-Date: 2020-09-16 13:47+0000\n" -"Last-Translator: Hugo Dahl <hugo@code-jedi.com>\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"PO-Revision-Date: 2020-10-15 18:17+0000\n" +"Last-Translator: Jeff Epler <jepler@gmail.com>\n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" @@ -46,7 +46,7 @@ msgstr " Fichier \"%q\", ligne %d" #: main.c msgid " output:\n" -msgstr " sortie :\n" +msgstr " sortie :\n" #: py/objstr.c #, c-format @@ -102,7 +102,7 @@ msgstr "%q doit être un tuple de longueur 2" #: shared-bindings/canio/Match.c msgid "%q out of range" -msgstr "" +msgstr "%q est hors de porté" #: ports/atmel-samd/common-hal/microcontroller/Pin.c msgid "%q pin invalid" @@ -255,6 +255,10 @@ msgid "'return' outside function" msgstr "'return' en dehors d'une fonction" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "'yield' en dehors d'une fonction" @@ -281,7 +285,7 @@ msgstr "Un canal d'interruptions matérielles est déjà utilisé" #: ports/esp32s2/common-hal/analogio/AnalogIn.c msgid "ADC2 is being used by WiFi" -msgstr "" +msgstr "ADC2 est utilisé pars le Wifi" #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format @@ -297,8 +301,9 @@ msgid "All I2C peripherals are in use" msgstr "Tous les périphériques I2C sont utilisés" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" -msgstr "" +msgstr "Tout les RX FIFOs sont utilisé" #: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" @@ -527,7 +532,7 @@ msgstr "Impossible de définir CCCD sur une caractéristique locale" #: shared-bindings/_bleio/Adapter.c msgid "Cannot create a new Adapter; use _bleio.adapter;" msgstr "" -"Un nouveau Adapter ne peut être créé ; Adapter; utilisez _bleio.adapter;" +"Un nouveau Adapter ne peut être créé ; Adapter; utilisez _bleio.adapter;" #: shared-bindings/displayio/Bitmap.c #: shared-bindings/memorymonitor/AllocationSize.c @@ -664,7 +669,7 @@ msgstr "Code brut corrompu" #: ports/cxd56/common-hal/camera/Camera.c msgid "Could not initialize Camera" -msgstr "" +msgstr "Impossible d'initialisé la Camera" #: ports/cxd56/common-hal/gnss/GNSS.c msgid "Could not initialize GNSS" @@ -795,7 +800,7 @@ msgstr "La BCE ne fonctionne que sur 16 octets à la fois" #: ports/esp32s2/common-hal/busio/SPI.c msgid "ESP-IDF memory allocation failed" -msgstr "" +msgstr "ESP-IDF échec d'allocation de la mémoire" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c @@ -900,7 +905,7 @@ msgstr "Impossible de se connecter : délai d'expiration" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Failed to init wifi" -msgstr "" +msgstr "Echec de l'initialisation du Wifi" #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" @@ -920,6 +925,7 @@ msgid "File exists" msgstr "Le fichier existe" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -957,7 +963,8 @@ msgid "Group full" msgstr "Groupe plein" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "Matériel occupé, essayez d'autres broches" @@ -965,6 +972,10 @@ msgstr "Matériel occupé, essayez d'autres broches" msgid "Hardware in use, try alternative pins" msgstr "Matériel utilisé, essayez d'autres broches" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "opération d'E/S sur un fichier fermé" @@ -975,7 +986,7 @@ msgstr "Erreur d'initialisation I2C" #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" -msgstr "" +msgstr "I2SOut n'est pas disponible" #: shared-bindings/aesio/aes.c #, c-format @@ -1029,7 +1040,8 @@ msgid "Invalid %q pin" msgstr "Broche invalide pour '%q'" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -1043,8 +1055,9 @@ msgstr "Fichier BMP invalide" #: shared-bindings/wifi/Radio.c msgid "Invalid BSSID" -msgstr "" +msgstr "BSSID Invalide" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "Broche DAC non valide fournie" @@ -1093,7 +1106,7 @@ msgstr "Taille de bloc de formatage invalide" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "Invalid frequency" -msgstr "" +msgstr "fréquence non Valide" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" @@ -1216,7 +1229,7 @@ msgstr "La valeur max. de x est %d lors d'une opération miroir" #: shared-bindings/canio/Message.c msgid "Messages limited to 8 bytes" -msgstr "" +msgstr "Message limité a 8 bytes" #: supervisor/shared/safe_mode.c msgid "MicroPython NLR jump failed. Likely memory corruption." @@ -1256,7 +1269,6 @@ msgid "No CCCD for this Characteristic" msgstr "Pas de CCCD pour cette caractéristique" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Pas de DAC sur la puce" @@ -1329,11 +1341,11 @@ msgstr "Pas de support entier long" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more channels available" -msgstr "" +msgstr "Pas de canal supplémentaire disponible" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more timers available" -msgstr "" +msgstr "Pas d'horloge supplémentaire disponible" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." @@ -1341,7 +1353,7 @@ msgstr "Plus de minuteurs disponibles sur cette broche." #: shared-bindings/wifi/Radio.c msgid "No network with that ssid" -msgstr "" +msgstr "Aucun réseau avec ce ssid" #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" @@ -1365,7 +1377,7 @@ msgstr "Affirmation de défaillance du Nordic Soft Device." #: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c msgid "Not a valid IP string" -msgstr "" +msgstr "Chaîne IP non valide" #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c @@ -2804,6 +2816,10 @@ msgstr "format invalide" msgid "invalid format specifier" msgstr "spécification de format invalide" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "clé invalide" @@ -3522,6 +3538,10 @@ msgstr "le type n'est pas un type de base accepté" msgid "type object '%q' has no attribute '%q'" msgstr "l'objet de type '%q' n'a pas d'attribut '%q'" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "le type prend 1 ou 3 arguments" @@ -3601,7 +3621,7 @@ msgstr "caractère de format '%c' (0x%x) non supporté à l'index %d" #: py/runtime.c msgid "unsupported type for %q: '%q'" -msgstr "type non supporté pour %q: '%q'" +msgstr "type non supporté pour %q : '%q'" #: py/runtime.c msgid "unsupported type for operator" diff --git a/locale/hi.po b/locale/hi.po index 90d7a1107..88c795a7c 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -246,6 +246,10 @@ msgid "'return' outside function" msgstr "" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "" @@ -288,6 +292,7 @@ msgid "All I2C peripherals are in use" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -895,6 +900,7 @@ msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -931,7 +937,8 @@ msgid "Group full" msgstr "" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "" @@ -939,6 +946,10 @@ msgstr "" msgid "Hardware in use, try alternative pins" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" @@ -1001,7 +1012,8 @@ msgid "Invalid %q pin" msgstr "" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -1017,6 +1029,7 @@ msgstr "" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "" @@ -1228,7 +1241,6 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "" @@ -2719,6 +2731,10 @@ msgstr "" msgid "invalid format specifier" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "" @@ -3425,6 +3441,10 @@ msgstr "" msgid "type object '%q' has no attribute '%q'" msgstr "" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index 7ae72a2e5..1650a5bdb 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n" "Language-Team: \n" @@ -247,6 +247,10 @@ msgid "'return' outside function" msgstr "'return' al di fuori della funzione" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "'yield' al di fuori della funzione" @@ -289,6 +293,7 @@ msgid "All I2C peripherals are in use" msgstr "Tutte le periferiche I2C sono in uso" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -908,6 +913,7 @@ msgid "File exists" msgstr "File esistente" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -944,7 +950,8 @@ msgid "Group full" msgstr "Gruppo pieno" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "" @@ -952,6 +959,10 @@ msgstr "" msgid "Hardware in use, try alternative pins" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "operazione I/O su file chiuso" @@ -1016,7 +1027,8 @@ msgid "Invalid %q pin" msgstr "Pin %q non valido" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -1032,6 +1044,7 @@ msgstr "File BMP non valido" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "" @@ -1247,7 +1260,6 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Nessun DAC sul chip" @@ -2765,6 +2777,10 @@ msgstr "formato non valido" msgid "invalid format specifier" msgstr "specificatore di formato non valido" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "chiave non valida" @@ -3487,6 +3503,10 @@ msgstr "il tipo non è un tipo di base accettabile" msgid "type object '%q' has no attribute '%q'" msgstr "l'oggetto di tipo '%q' non ha l'attributo '%q'" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "tipo prende 1 o 3 argomenti" diff --git a/locale/ja.po b/locale/ja.po index 8443db349..01900d9a8 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: 2020-09-25 18:20+0000\n" "Last-Translator: Taku Fukada <naninunenor@gmail.com>\n" "Language-Team: none\n" @@ -253,6 +253,10 @@ msgid "'return' outside function" msgstr "関数外でのreturn" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "関数外でのyield" @@ -295,6 +299,7 @@ msgid "All I2C peripherals are in use" msgstr "全てのI2C周辺機器が使用中" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "全てのRX FIFOが使用中" @@ -908,6 +913,7 @@ msgid "File exists" msgstr "ファイルが存在します" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -944,7 +950,8 @@ msgid "Group full" msgstr "グループが一杯" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "ハードウェアビジー。代替のピンを試してください" @@ -952,6 +959,10 @@ msgstr "ハードウェアビジー。代替のピンを試してください" msgid "Hardware in use, try alternative pins" msgstr "ハードウェア使用中。代わりのピンを試してください" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "閉じられたファイルへのI/O操作" @@ -1016,7 +1027,8 @@ msgid "Invalid %q pin" msgstr "不正な%qピン" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "不正な%qピン選択" @@ -1032,6 +1044,7 @@ msgstr "不正なBMPファイル" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "不正なDACピンが与えられました" @@ -1243,7 +1256,6 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "チップにDACがありません" @@ -2749,6 +2761,10 @@ msgstr "" msgid "invalid format specifier" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "不正な鍵" @@ -3458,6 +3474,10 @@ msgstr "この型はベース型にできません" msgid "type object '%q' has no attribute '%q'" msgstr "" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "typeは1つか3つの引数をとります" diff --git a/locale/ko.po b/locale/ko.po index 822c450a3..a9bc60f78 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: 2020-10-05 12:12+0000\n" "Last-Translator: Michal Čihař <michal@cihar.com>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -249,6 +249,10 @@ msgid "'return' outside function" msgstr "'return' 는 함수 외부에 존재합니다" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "'yield' 는 함수 외부에 존재합니다" @@ -291,6 +295,7 @@ msgid "All I2C peripherals are in use" msgstr "사용중인 모든 I2C주변 기기" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -900,6 +905,7 @@ msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -936,7 +942,8 @@ msgid "Group full" msgstr "" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "" @@ -944,6 +951,10 @@ msgstr "" msgid "Hardware in use, try alternative pins" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" @@ -1006,7 +1017,8 @@ msgid "Invalid %q pin" msgstr "" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -1022,6 +1034,7 @@ msgstr "" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "" @@ -1233,7 +1246,6 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "" @@ -2725,6 +2737,10 @@ msgstr "형식가 유효하지 않습니다" msgid "invalid format specifier" msgstr "형식 지정자(format specifier)가 유효하지 않습니다" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "키가 유효하지 않습니다" @@ -3431,6 +3447,10 @@ msgstr "" msgid "type object '%q' has no attribute '%q'" msgstr "" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index 6ee0c68f4..edcaefb83 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: 2020-09-09 16:05+0000\n" "Last-Translator: Jelle Jager <jell@jjc.id.au>\n" "Language-Team: none\n" @@ -251,6 +251,10 @@ msgid "'return' outside function" msgstr "'return' buiten de functie" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "'yield' buiten de functie" @@ -293,6 +297,7 @@ msgid "All I2C peripherals are in use" msgstr "Alle I2C peripherals zijn in gebruik" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -908,6 +913,7 @@ msgid "File exists" msgstr "Bestand bestaat" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -946,7 +952,8 @@ msgid "Group full" msgstr "Groep is vol" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "Hardware bezig, probeer alternatieve pinnen" @@ -954,6 +961,10 @@ msgstr "Hardware bezig, probeer alternatieve pinnen" msgid "Hardware in use, try alternative pins" msgstr "Hardware in gebruik, probeer alternatieve pinnen" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "I/O actie op gesloten bestand" @@ -1018,7 +1029,8 @@ msgid "Invalid %q pin" msgstr "Ongeldige %q pin" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "Ongeldige %q pin selectie" @@ -1034,6 +1046,7 @@ msgstr "Ongeldig BMP bestand" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "Ongeldige DAC pin opgegeven" @@ -1245,7 +1258,6 @@ msgid "No CCCD for this Characteristic" msgstr "Geen CCCD voor deze Characteristic" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Geen DAC op de chip" @@ -2776,6 +2788,10 @@ msgstr "ongeldig formaat" msgid "invalid format specifier" msgstr "ongeldige formaatspecificatie" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "ongeldige sleutel" @@ -3488,6 +3504,10 @@ msgstr "type is geen aanvaardbaar basistype" msgid "type object '%q' has no attribute '%q'" msgstr "objecttype '%q' heeft geen attribuut '%q'" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "type accepteert 1 of 3 argumenten" diff --git a/locale/pl.po b/locale/pl.po index f2f2b2c14..b79fcc606 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: 2020-09-29 01:39+0000\n" "Last-Translator: Maciej Stankiewicz <tawezik@gmail.com>\n" "Language-Team: pl\n" @@ -253,6 +253,10 @@ msgid "'return' outside function" msgstr "'return' poza funkcją" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "" + +#: py/compile.c msgid "'yield' outside function" msgstr "'yield' poza funkcją" @@ -295,6 +299,7 @@ msgid "All I2C peripherals are in use" msgstr "Wszystkie peryferia I2C w użyciu" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -908,6 +913,7 @@ msgid "File exists" msgstr "Plik istnieje" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -944,7 +950,8 @@ msgid "Group full" msgstr "Grupa pełna" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "Sprzęt zajęty, wypróbuj alternatywne piny" @@ -952,6 +959,10 @@ msgstr "Sprzęt zajęty, wypróbuj alternatywne piny" msgid "Hardware in use, try alternative pins" msgstr "Sprzęt w użyciu, wypróbuj alternatywne piny" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "Operacja I/O na zamkniętym pliku" @@ -1016,7 +1027,8 @@ msgid "Invalid %q pin" msgstr "Zła nóżka %q" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -1032,6 +1044,7 @@ msgstr "Zły BMP" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "" @@ -1244,7 +1257,6 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Brak DAC" @@ -2742,6 +2754,10 @@ msgstr "zły format" msgid "invalid format specifier" msgstr "zła specyfikacja formatu" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "zły klucz" @@ -3450,6 +3466,10 @@ msgstr "typ nie może być bazowy" msgid "type object '%q' has no attribute '%q'" msgstr "typ '%q' nie ma atrybutu '%q'" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "type wymaga 1 lub 3 argumentów" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 92214322d..240a56104 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,8 +5,8 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" -"PO-Revision-Date: 2020-10-09 22:07+0000\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"PO-Revision-Date: 2020-10-16 17:01+0000\n" "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n" "Language-Team: \n" "Language: pt_BR\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.3-dev\n" +"X-Generator: Weblate 4.3.1-dev\n" #: main.c msgid "" @@ -255,6 +255,10 @@ msgid "'return' outside function" msgstr "função externa 'return'" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "'yield a partir' de dentro da função async" + +#: py/compile.c msgid "'yield' outside function" msgstr "função externa 'yield'" @@ -297,6 +301,7 @@ msgid "All I2C peripherals are in use" msgstr "Todos os periféricos I2C estão em uso" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "Todos os FIFOs RX estão em uso" @@ -917,6 +922,7 @@ msgid "File exists" msgstr "Arquivo já existe" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "Os filtros são muito complexos" @@ -955,7 +961,8 @@ msgid "Group full" msgstr "Grupo cheio" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "O hardware está ocupado, tente os pinos alternativos" @@ -963,6 +970,10 @@ msgstr "O hardware está ocupado, tente os pinos alternativos" msgid "Hardware in use, try alternative pins" msgstr "O hardware está em uso, tente os pinos alternativos" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "O nome do host deve ter entre 1 e 253 caracteres" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "Operação I/O no arquivo fechado" @@ -1027,7 +1038,8 @@ msgid "Invalid %q pin" msgstr "Pino do %q inválido" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "Seleção inválida dos pinos %q" @@ -1043,6 +1055,7 @@ msgstr "Arquivo BMP inválido" msgid "Invalid BSSID" msgstr "BSSID Inválido" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "O pino DAC informado é inválido" @@ -1254,7 +1267,6 @@ msgid "No CCCD for this Characteristic" msgstr "Não há nenhum CCCD para esta característica" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Nenhum DAC no chip" @@ -2800,6 +2812,10 @@ msgstr "formato inválido" msgid "invalid format specifier" msgstr "o especificador do formato é inválido" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "o nome do host é inválido" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "chave inválida" @@ -3518,6 +3534,10 @@ msgstr "tipo não é um tipo base aceitável" msgid "type object '%q' has no attribute '%q'" msgstr "o objeto tipo '%q' não possuí atributo '%q'" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "o tipo do objeto 'generator' não possui qualquer atributo '__await__'" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "o tipo usa 1 ou 3 argumentos" diff --git a/locale/sv.po b/locale/sv.po index a8d4d9ffc..f3bf71558 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,8 +5,8 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" -"PO-Revision-Date: 2020-10-02 22:53+0000\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"PO-Revision-Date: 2020-10-14 18:12+0000\n" "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n" "Language-Team: LANGUAGE <LL@li.org>\n" "Language: sv\n" @@ -251,6 +251,10 @@ msgid "'return' outside function" msgstr "'return' utanför funktion" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "'yield from' i async-funktion" + +#: py/compile.c msgid "'yield' outside function" msgstr "'yield' utanför funktion" @@ -277,7 +281,7 @@ msgstr "En kanal för hårdvaruavbrott används redan" #: ports/esp32s2/common-hal/analogio/AnalogIn.c msgid "ADC2 is being used by WiFi" -msgstr "" +msgstr "ADC2 används av WiFi" #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format @@ -293,6 +297,7 @@ msgid "All I2C peripherals are in use" msgstr "All I2C-kringutrustning används" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "Alla RX FIFO i bruk" @@ -908,6 +913,7 @@ msgid "File exists" msgstr "Filen finns redan" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "Filter för komplexa" @@ -944,7 +950,8 @@ msgid "Group full" msgstr "Gruppen är full" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "Hårdvaran är upptagen, prova alternativa pinnar" @@ -952,6 +959,10 @@ msgstr "Hårdvaran är upptagen, prova alternativa pinnar" msgid "Hardware in use, try alternative pins" msgstr "Hårdvaran används redan, prova alternativa pinnar" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "I/O-operation på stängd fil" @@ -1016,7 +1027,8 @@ msgid "Invalid %q pin" msgstr "Ogiltig %q-pinne" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "Ogiltigt val av %q pinne" @@ -1032,6 +1044,7 @@ msgstr "Ogiltig BMP-fil" msgid "Invalid BSSID" msgstr "Ogiltig BSSID" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "Ogiltig DAC-pinne angiven" @@ -1244,7 +1257,6 @@ msgid "No CCCD for this Characteristic" msgstr "Ingen CCCD för denna karaktäristik" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Ingen DAC på chipet" @@ -2773,6 +2785,10 @@ msgstr "ogiltigt format" msgid "invalid format specifier" msgstr "ogiltig formatspecificerare" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "ogiltig nyckel" @@ -3485,6 +3501,10 @@ msgstr "typ är inte en acceptabel bastyp" msgid "type object '%q' has no attribute '%q'" msgstr "typobjektet '%q' har inget attribut '%q'" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "typobjekt 'generator' har inget attribut '__await__'" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "typen tar 1 eller 3 argument" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 9e7baa9d0..bf7b3c636 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,8 +6,8 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-06 13:26-0400\n" -"PO-Revision-Date: 2020-10-10 23:51+0000\n" +"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"PO-Revision-Date: 2020-10-13 17:11+0000\n" "Last-Translator: hexthat <hexthat@gmail.com>\n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -253,6 +253,10 @@ msgid "'return' outside function" msgstr "'return' wàibù gōngnéng" #: py/compile.c +msgid "'yield from' inside async function" +msgstr "Yì bù hán shù zhōng de 'yield from'" + +#: py/compile.c msgid "'yield' outside function" msgstr "'yield' wàibù gōngnéng" @@ -295,6 +299,7 @@ msgid "All I2C peripherals are in use" msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "Suǒyǒu shǐyòng zhōng de RX FIFO" @@ -906,6 +911,7 @@ msgid "File exists" msgstr "Wénjiàn cúnzài" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "guò lǜ qì tài fù zá" @@ -942,7 +948,8 @@ msgid "Group full" msgstr "Fēnzǔ yǐ mǎn" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "Yìngjiàn máng, qǐng chángshì qítā zhēnjiǎo" @@ -950,6 +957,10 @@ msgstr "Yìngjiàn máng, qǐng chángshì qítā zhēnjiǎo" msgid "Hardware in use, try alternative pins" msgstr "Shǐyòng de yìngjiàn, qǐng chángshì qítā yǐn jiǎo" +#: shared-bindings/wifi/Radio.c +msgid "Hostname must be between 1 and 253 characters" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "Wénjiàn shàng de I/ O cāozuò" @@ -1014,7 +1025,8 @@ msgid "Invalid %q pin" msgstr "Wúxiào de %q yǐn jiǎo" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "wú xiào %q yǐn jiǎo xuǎn zé" @@ -1030,6 +1042,7 @@ msgstr "Wúxiào de BMP wénjiàn" msgid "Invalid BSSID" msgstr "Wúxiào de BSSID" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "Tí gōng liǎo wúxiào de DAC yǐn jiǎo" @@ -1241,7 +1254,6 @@ msgid "No CCCD for this Characteristic" msgstr "Zhège tèzhēng méiyǒu CCCD" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Méiyǒu DAC zài xīnpiàn shàng de" @@ -2765,6 +2777,10 @@ msgstr "wúxiào géshì" msgid "invalid format specifier" msgstr "wúxiào de géshì biāozhù" +#: shared-bindings/wifi/Radio.c +msgid "invalid hostname" +msgstr "" + #: extmod/modussl_axtls.c msgid "invalid key" msgstr "wúxiào de mì yào" @@ -3474,6 +3490,10 @@ msgstr "lèixíng bùshì kě jiēshòu de jīchǔ lèixíng" msgid "type object '%q' has no attribute '%q'" msgstr "lèixíng duìxiàng '%q' méiyǒu shǔxìng '%q'" +#: py/objgenerator.c +msgid "type object 'generator' has no attribute '__await__'" +msgstr "lèi xíng duì xiàng 'generator' méi yǒu shǔ xìng '__await__'" + #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "lèixíng wèi 1 huò 3 gè cānshù" diff --git a/mpy-cross/mpy-cross.mk b/mpy-cross/mpy-cross.mk index b4c8e34a2..629054af9 100644 --- a/mpy-cross/mpy-cross.mk +++ b/mpy-cross/mpy-cross.mk @@ -66,7 +66,7 @@ LDFLAGS += -static -static-libgcc -static-libstdc++ endif # source files -SRC_C = \ +SRC_C += \ main.c \ gccollect.c \ supervisor/stub/safe_mode.c \ diff --git a/ports/atmel-samd/boards/bdmicro_vina_d51/board.c b/ports/atmel-samd/boards/bdmicro_vina_d51/board.c new file mode 100644 index 000000000..bd63baa6f --- /dev/null +++ b/ports/atmel-samd/boards/bdmicro_vina_d51/board.c @@ -0,0 +1,48 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" + +void board_init(void) +{ + // struct port_config pin_conf; + // port_get_config_defaults(&pin_conf); + // + // pin_conf.direction = PORT_PIN_DIR_OUTPUT; + // port_pin_set_config(MICROPY_HW_LED_TX, &pin_conf); + // port_pin_set_output_level(MICROPY_HW_LED_TX, true); + // + // port_pin_set_config(MICROPY_HW_LED_RX, &pin_conf); + // port_pin_set_output_level(MICROPY_HW_LED_RX, true); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.h b/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.h new file mode 100644 index 000000000..6bc9bb706 --- /dev/null +++ b/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.h @@ -0,0 +1,28 @@ +#define MICROPY_HW_BOARD_NAME "BDMICRO VINA-D51" +#define MICROPY_HW_MCU_NAME "samd51n20" + +#define CIRCUITPY_MCU_FAMILY samd51 + +// These are pins not to reset. +// Don't reset QSPI data pins +#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11) +#define MICROPY_PORT_B (PORT_PB10 | PORT_PB11) +#define MICROPY_PORT_C (0) +#define MICROPY_PORT_D (0) + +#define BOARD_HAS_CRYSTAL 1 + +#define DEFAULT_I2C_BUS_SDA (&pin_PB02) +#define DEFAULT_I2C_BUS_SCL (&pin_PB03) +#define DEFAULT_SPI_BUS_MISO (&pin_PB23) +#define DEFAULT_UART_BUS_TX (&pin_PB24) +#define DEFAULT_UART_BUS_RX (&pin_PB25) +#define DEFAULT_SPI_BUS_MOSI (&pin_PC27) +#define DEFAULT_SPI_BUS_SCK (&pin_PC28) +#define MICROPY_HW_LED_STATUS (&pin_PA15) +#define MICROPY_HW_LED_RX (&pin_PC05) +#define MICROPY_HW_LED_TX (&pin_PC06) + +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 diff --git a/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.mk b/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.mk new file mode 100644 index 000000000..f1b2f4c1d --- /dev/null +++ b/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.mk @@ -0,0 +1,12 @@ +USB_VID = 0x31e2 +USB_PID = 0x2011 +USB_PRODUCT = "VINA-D51" +USB_MANUFACTURER = "BDMICRO LLC" + +CHIP_VARIANT = SAMD51N20A +CHIP_FAMILY = samd51 + +QSPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 2 +EXTERNAL_FLASH_DEVICES = "MX25L51245G","GD25S512MD" +LONGINT_IMPL = MPZ diff --git a/ports/atmel-samd/boards/bdmicro_vina_d51/pins.c b/ports/atmel-samd/boards/bdmicro_vina_d51/pins.c new file mode 100644 index 000000000..931e0328f --- /dev/null +++ b/ports/atmel-samd/boards/bdmicro_vina_d51/pins.c @@ -0,0 +1,82 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PB08) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_PC00) }, + { MP_ROM_QSTR(MP_QSTR_A11), MP_ROM_PTR(&pin_PC01) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PB00) }, + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PB01) }, + { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PB05) }, + { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_PB07) }, + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PC10) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PC11) }, + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA14) }, + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PB14) }, + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PB15) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PC20) }, + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PC21) }, + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB31) }, + { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_DAC0), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_DAC1), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_EN), MP_ROM_PTR(&pin_PC03) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_GPIO0), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_UART3_RTS), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_GPIO2), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_UART3_CTS), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_RESET), MP_ROM_PTR(&pin_PC02) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_RX), MP_ROM_PTR(&pin_PB21) }, + { MP_ROM_QSTR(MP_QSTR_UART3_RX), MP_ROM_PTR(&pin_PB21) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_TX), MP_ROM_PTR(&pin_PB20) }, + { MP_ROM_QSTR(MP_QSTR_UART3_TX), MP_ROM_PTR(&pin_PB20) }, + { MP_ROM_QSTR(MP_QSTR_I2C_SCL), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_I2C_SDA), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_I2S_FS_0), MP_ROM_PTR(&pin_PA20) }, + { MP_ROM_QSTR(MP_QSTR_I2S_FS_1), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_I2S_MCK_0), MP_ROM_PTR(&pin_PB17) }, + { MP_ROM_QSTR(MP_QSTR_I2S_MCK_1), MP_ROM_PTR(&pin_PB13) }, + { MP_ROM_QSTR(MP_QSTR_I2S_SCK_0), MP_ROM_PTR(&pin_PB16) }, + { MP_ROM_QSTR(MP_QSTR_I2S_SCK_1), MP_ROM_PTR(&pin_PB12) }, + { MP_ROM_QSTR(MP_QSTR_I2S_SDI), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_I2S_SDO), MP_ROM_PTR(&pin_PA21) }, + { MP_ROM_QSTR(MP_QSTR_LED_B), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_LED_STATUS), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_LED_G), MP_ROM_PTR(&pin_PB18) }, + { MP_ROM_QSTR(MP_QSTR_LED_R), MP_ROM_PTR(&pin_PB19) }, + { MP_ROM_QSTR(MP_QSTR_LED_RX), MP_ROM_PTR(&pin_PC05) }, + { MP_ROM_QSTR(MP_QSTR_LED_TX), MP_ROM_PTR(&pin_PC06) }, + { MP_ROM_QSTR(MP_QSTR_RS485_RE), MP_ROM_PTR(&pin_PC15) }, + { MP_ROM_QSTR(MP_QSTR_RS485_RX), MP_ROM_PTR(&pin_PC13) }, + { MP_ROM_QSTR(MP_QSTR_RS485_TE), MP_ROM_PTR(&pin_PC14) }, + { MP_ROM_QSTR(MP_QSTR_RS485_TX), MP_ROM_PTR(&pin_PC12) }, + { MP_ROM_QSTR(MP_QSTR_SPI_MISO), MP_ROM_PTR(&pin_PB23) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB23) }, + { MP_ROM_QSTR(MP_QSTR_SPI_MOSI), MP_ROM_PTR(&pin_PC27) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PC27) }, + { MP_ROM_QSTR(MP_QSTR_SPI_SCK), MP_ROM_PTR(&pin_PC28) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PC28) }, + { MP_ROM_QSTR(MP_QSTR_SPI_SS), MP_ROM_PTR(&pin_PB22) }, + { MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_PB22) }, + { MP_ROM_QSTR(MP_QSTR_UART1_CTS), MP_ROM_PTR(&pin_PC19) }, + { MP_ROM_QSTR(MP_QSTR_UART1_RTS), MP_ROM_PTR(&pin_PC18) }, + { MP_ROM_QSTR(MP_QSTR_UART1_RX), MP_ROM_PTR(&pin_PC17) }, + { MP_ROM_QSTR(MP_QSTR_UART1_TX), MP_ROM_PTR(&pin_PC16) }, + { MP_ROM_QSTR(MP_QSTR_UART2_RX), MP_ROM_PTR(&pin_PB25) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB25) }, + { MP_ROM_QSTR(MP_QSTR_UART2_TX), MP_ROM_PTR(&pin_PB24) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB24) }, + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/board.c b/ports/atmel-samd/boards/dynossat_edu_eps/board.c new file mode 100644 index 000000000..c8e20206a --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_eps/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" + +void board_init(void) +{ +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.h b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.h new file mode 100644 index 000000000..ef4fa8f99 --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.h @@ -0,0 +1,40 @@ +#define MICROPY_HW_BOARD_NAME "DynOSSAT-EDU-EPS" +#define MICROPY_HW_MCU_NAME "samd21g18" + +#define MICROPY_HW_NEOPIXEL (&pin_PA06) + +#define SPI_FLASH_MOSI_PIN &pin_PA22 +#define SPI_FLASH_MISO_PIN &pin_PA21 +#define SPI_FLASH_SCK_PIN &pin_PA23 +#define SPI_FLASH_CS_PIN &pin_PA20 + +// These are pins not to reset. +#define MICROPY_PORT_A ( 0 ) +#define MICROPY_PORT_B ( 0 ) +#define MICROPY_PORT_C ( 0 ) + +#define BOARD_HAS_CRYSTAL 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PA09) +#define DEFAULT_I2C_BUS_SDA (&pin_PA08) + +#define DEFAULT_SPI_BUS_SCK (&pin_PB11) +#define DEFAULT_SPI_BUS_MOSI (&pin_PA12) +#define DEFAULT_SPI_BUS_MISO (&pin_PB10) + +#define DEFAULT_UART_BUS_RX (&pin_PA17) +#define DEFAULT_UART_BUS_TX (&pin_PA16) + +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 +#define IGNORE_PIN_PA03 1 +#define IGNORE_PIN_PA13 1 +#define IGNORE_PIN_PA14 1 +#define IGNORE_PIN_PA15 1 +#define IGNORE_PIN_PA18 1 +#define IGNORE_PIN_PA27 1 +#define IGNORE_PIN_PA28 1 +#define IGNORE_PIN_PB08 1 +#define IGNORE_PIN_PB22 1 +#define IGNORE_PIN_PB23 1 diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk new file mode 100644 index 000000000..3c0cc07be --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk @@ -0,0 +1,23 @@ +USB_VID = 0x04D8 +USB_PID = 0xEAD1 + +USB_PRODUCT = "DynOSSAT-EDU-EPS-v1.0" +USB_MANUFACTURER = "BH Dynamics" + +CHIP_VARIANT = SAMD21G18A +CHIP_FAMILY = samd21 + +SPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = "GD25Q32C" +LONGINT_IMPL = MPZ + +CIRCUITPY_BITBANGIO = 0 +CIRCUITPY_FREQUENCYIO = 0 +CIRCUITPY_COUNTIO = 0 +CIRCUITPY_I2CPERIPHERAL = 0 +CIRCUITPY_VECTORIO = 0 + +CFLAGS_INLINE_LIMIT = 60 + +SUPEROPT_GC = 0 diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/pins.c b/ports/atmel-samd/boards/dynossat_edu_eps/pins.c new file mode 100644 index 000000000..a910311d4 --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_eps/pins.c @@ -0,0 +1,32 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PB11) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB10) }, + { MP_ROM_QSTR(MP_QSTR_D30), MP_ROM_PTR(&pin_PA30) }, + { MP_ROM_QSTR(MP_QSTR_D31), MP_ROM_PTR(&pin_PA31) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_OVTEMP), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_SAT_RESET), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_SAT_PWR_ENABLE), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_INT_IMU_OBC), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_PWRMON_SDA), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_PWRMON_SCL), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_PWRMON_ALERT), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_I2C_MONITOR), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/dynossat_edu_obc/board.c b/ports/atmel-samd/boards/dynossat_edu_obc/board.c new file mode 100644 index 000000000..c8e20206a --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_obc/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" + +void board_init(void) +{ +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.h b/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.h new file mode 100644 index 000000000..d7df8db74 --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.h @@ -0,0 +1,44 @@ +#define MICROPY_HW_BOARD_NAME "DynOSSAT-EDU-OBC" +#define MICROPY_HW_MCU_NAME "samd51j20" + +#define MICROPY_HW_NEOPIXEL (&pin_PA08) + +#define SPI_FLASH_MOSI_PIN &pin_PA16 +#define SPI_FLASH_MISO_PIN &pin_PA18 +#define SPI_FLASH_SCK_PIN &pin_PA17 +#define SPI_FLASH_CS_PIN &pin_PA19 + +// These are pins not to reset. +#define MICROPY_PORT_A ( PORT_PA16 | PORT_PA17 | PORT_PA18 | PORT_PA19 ) +#define MICROPY_PORT_B ( 0 ) +#define MICROPY_PORT_C ( 0 ) +#define MICROPY_PORT_D ( 0 ) + +#define BOARD_HAS_CRYSTAL 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PB13) +#define DEFAULT_I2C_BUS_SDA (&pin_PB12) + +#define DEFAULT_SPI_BUS_SCK (&pin_PB03) +#define DEFAULT_SPI_BUS_MOSI (&pin_PB02) +#define DEFAULT_SPI_BUS_MISO (&pin_PB01) + +#define DEFAULT_UART_BUS_RX (&pin_PA23) +#define DEFAULT_UART_BUS_TX (&pin_PA22) + +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 +#define IGNORE_PIN_PA02 1 +#define IGNORE_PIN_PA13 1 +#define IGNORE_PIN_PA14 1 +#define IGNORE_PIN_PA20 1 +#define IGNORE_PIN_PA21 1 +#define IGNORE_PIN_PA27 1 +#define IGNORE_PIN_PB00 1 +#define IGNORE_PIN_PB04 1 +#define IGNORE_PIN_PB05 1 +#define IGNORE_PIN_PB16 1 +#define IGNORE_PIN_PB17 1 +#define IGNORE_PIN_PB23 1 +#define IGNORE_PIN_PB31 1 diff --git a/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.mk b/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.mk new file mode 100644 index 000000000..360940cf1 --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.mk @@ -0,0 +1,16 @@ +USB_VID = 0x04D8 +USB_PID = 0xEAD2 + +USB_PRODUCT = "DynOSSAT-EDU-OBC-v1.0" +USB_MANUFACTURER = "BH Dynamics" + +CHIP_VARIANT = SAMD51J20A +CHIP_FAMILY = samd51 + +SPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = "GD25Q32C" +LONGINT_IMPL = MPZ + +CFLAGS_INLINE_LIMIT = 60 +SUPEROPT_GC = 0 diff --git a/ports/atmel-samd/boards/dynossat_edu_obc/pins.c b/ports/atmel-samd/boards/dynossat_edu_obc/pins.c new file mode 100644 index 000000000..a560360f7 --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_obc/pins.c @@ -0,0 +1,40 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PB08) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB01) }, + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PB15) }, + { MP_ROM_QSTR(MP_QSTR_D30), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_D31), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PB14) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB12) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB13) }, + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PB11) }, + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PB10) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB07) }, + { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PB30) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_D32), MP_ROM_PTR(&pin_PA30) }, + { MP_ROM_QSTR(MP_QSTR_D33), MP_ROM_PTR(&pin_PA31) }, + { MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_PB22) }, + { MP_ROM_QSTR(MP_QSTR_INT_IMU), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_SAT_POWER), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk b/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk index 18cef738e..249265151 100644 --- a/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk +++ b/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk @@ -11,12 +11,12 @@ LONGINT_IMPL = MPZ # Not needed. CIRCUITPY_AUDIOBUSIO = 0 -CIRCUITPY_FRAMEBUFFERIO = 0 +CIRCUITPY_AUDIOMP3 = 0 +CIRCUITPY_BLEIO_HCI = 0 CIRCUITPY_DISPLAYIO = 0 -CIRCUITPY_RGBMATRIX = 0 +CIRCUITPY_FRAMEBUFFERIO = 0 CIRCUITPY_PS2IO = 0 -CIRCUITPY_AUDIOMP3 = 0 - +CIRCUITPY_RGBMATRIX = 0 CIRCUITPY_ULAB = 0 # Override optimization to keep binary small diff --git a/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk b/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk index e999629c3..4895cda77 100644 --- a/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk +++ b/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk @@ -6,10 +6,6 @@ USB_MANUFACTURER = "Adafruit Industries LLC" CHIP_VARIANT = SAMD51J19A CHIP_FAMILY = samd51 -# Support _bleio via the on-board ESP32 module. -CIRCUITPY_BLEIO = 1 -CIRCUITPY_BLEIO_HCI = 1 - QSPI_FLASH_FILESYSTEM = 1 EXTERNAL_FLASH_DEVICE_COUNT = 3 EXTERNAL_FLASH_DEVICES = "S25FL116K, S25FL216K, GD25Q16C" diff --git a/ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.mk b/ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.mk index 9217cdf23..fcefaee9b 100644 --- a/ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.mk +++ b/ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.mk @@ -18,7 +18,7 @@ LONGINT_IMPL = MPZ # Disable modules that are unusable on this special-purpose board. CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_AUDIOIO = 0 -CIRCUITPY_BLEIO = 0 +CIRCUITPY_BLEIO_HCI = 0 CIRCUITPY_DISPLAYIO = 0 CIRCUITPY_FRAMEBUFFERIO = 0 CIRCUITPY_GAMEPAD = 0 diff --git a/ports/atmel-samd/common-hal/pulseio/PulseIn.h b/ports/atmel-samd/common-hal/pulseio/PulseIn.h index 99358178f..b91bbd703 100644 --- a/ports/atmel-samd/common-hal/pulseio/PulseIn.h +++ b/ports/atmel-samd/common-hal/pulseio/PulseIn.h @@ -51,7 +51,6 @@ void pulsein_reset(void); void pulsein_interrupt_handler(uint8_t channel); void pulsein_timer_interrupt_handler(uint8_t index); #ifdef SAMD21 -void rtc_set_continuous(void); void rtc_start_pulsein(void); void rtc_end_pulsein(void); #endif diff --git a/ports/atmel-samd/mpconfigport.h b/ports/atmel-samd/mpconfigport.h index f185142e4..f7ccff4da 100644 --- a/ports/atmel-samd/mpconfigport.h +++ b/ports/atmel-samd/mpconfigport.h @@ -43,12 +43,12 @@ #define MICROPY_PY_SYS_PLATFORM "Atmel SAMD21" #define SPI_FLASH_MAX_BAUDRATE 8000000 #define MICROPY_PY_BUILTINS_NOTIMPLEMENTED (0) -#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (0) #define MICROPY_PY_FUNCTION_ATTRS (0) // MICROPY_PY_UJSON depends on MICROPY_PY_IO #define MICROPY_PY_IO (0) #define MICROPY_PY_REVERSE_SPECIAL_METHODS (0) #define MICROPY_PY_UJSON (0) +#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (0) #define MICROPY_PY_UERRNO_LIST \ X(EPERM) \ X(ENOENT) \ @@ -81,7 +81,6 @@ #endif #define SPI_FLASH_MAX_BAUDRATE 24000000 #define MICROPY_PY_BUILTINS_NOTIMPLEMENTED (1) -#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (1) #define MICROPY_PY_FUNCTION_ATTRS (1) // MICROPY_PY_UJSON depends on MICROPY_PY_IO #define MICROPY_PY_IO (1) diff --git a/ports/atmel-samd/mpconfigport.mk b/ports/atmel-samd/mpconfigport.mk index a16daf4b0..1929e146d 100644 --- a/ports/atmel-samd/mpconfigport.mk +++ b/ports/atmel-samd/mpconfigport.mk @@ -37,6 +37,9 @@ ifndef CIRCUITPY_TOUCHIO_USE_NATIVE CIRCUITPY_TOUCHIO_USE_NATIVE = 1 endif +# No room for HCI _bleio on SAMD21. +CIRCUITPY_BLEIO_HCI = 0 + CIRCUITPY_SDCARDIO ?= 0 # Not enough RAM for framebuffers diff --git a/ports/atmel-samd/supervisor/port.c b/ports/atmel-samd/supervisor/port.c index e69062296..d65d09825 100644 --- a/ports/atmel-samd/supervisor/port.c +++ b/ports/atmel-samd/supervisor/port.c @@ -96,19 +96,20 @@ #endif volatile bool hold_interrupt = false; #ifdef SAMD21 +static void rtc_set_continuous(bool continuous) { + while (RTC->MODE0.STATUS.bit.SYNCBUSY); + RTC->MODE0.READREQ.reg = (continuous ? RTC_READREQ_RCONT : 0) | 0x0010; + while (RTC->MODE0.STATUS.bit.SYNCBUSY); +} + void rtc_start_pulsein(void) { - rtc_set_continuous(); + rtc_set_continuous(true); hold_interrupt = true; } void rtc_end_pulsein(void) { hold_interrupt = false; -} - -void rtc_set_continuous(void) { - while (RTC->MODE0.STATUS.bit.SYNCBUSY); - RTC->MODE0.READREQ.reg = RTC_READREQ_RREQ | RTC_READREQ_RCONT | 0x0010; - while (RTC->MODE0.STATUS.bit.SYNCBUSY); + rtc_set_continuous(false); } #endif @@ -430,19 +431,28 @@ uint32_t port_get_saved_word(void) { static volatile uint64_t overflowed_ticks = 0; static volatile bool _ticks_enabled = false; -static uint32_t _get_count(void) { +static uint32_t _get_count(uint32_t* overflow_count) { #ifdef SAM_D5X_E5X while ((RTC->MODE0.SYNCBUSY.reg & (RTC_MODE0_SYNCBUSY_COUNTSYNC | RTC_MODE0_SYNCBUSY_COUNT)) != 0) {} #endif #ifdef SAMD21 + // Request a read so we don't stall the bus later. See section 14.3.1.5 Read Request + RTC->MODE0.READREQ.reg = RTC_READREQ_RREQ | 0x0010; while (RTC->MODE0.STATUS.bit.SYNCBUSY != 0) {} #endif + // Disable interrupts so we can grab the count and the overflow. + common_hal_mcu_disable_interrupts(); + uint32_t count = RTC->MODE0.COUNT.reg; + if (overflow_count != NULL) { + *overflow_count = overflowed_ticks; + } + common_hal_mcu_enable_interrupts(); - return RTC->MODE0.COUNT.reg; + return count; } static void _port_interrupt_after_ticks(uint32_t ticks) { - uint32_t current_ticks = _get_count(); + uint32_t current_ticks = _get_count(NULL); if (ticks > 1 << 28) { // We'll interrupt sooner with an overflow. return; @@ -490,12 +500,13 @@ void RTC_Handler(void) { } uint64_t port_get_raw_ticks(uint8_t* subticks) { - uint32_t current_ticks = _get_count(); + uint32_t overflow_count; + uint32_t current_ticks = _get_count(&overflow_count); if (subticks != NULL) { *subticks = (current_ticks % 16) * 2; } - return overflowed_ticks + current_ticks / 16; + return overflow_count + current_ticks / 16; } // Enable 1/1024 second tick. @@ -505,6 +516,7 @@ void port_enable_tick(void) { RTC->MODE0.INTENSET.reg = RTC_MODE0_INTENSET_PER2; #endif #ifdef SAMD21 + // TODO: Switch to using the PER *event* from the RTC to generate an interrupt via EVSYS. _ticks_enabled = true; _port_interrupt_after_ticks(1); #endif diff --git a/ports/cxd56/Makefile b/ports/cxd56/Makefile index 7e145f5e2..5201f0db5 100644 --- a/ports/cxd56/Makefile +++ b/ports/cxd56/Makefile @@ -162,7 +162,7 @@ SRC_SHARED_MODULE_EXPANDED = $(addprefix shared-bindings/, $(SRC_SHARED_MODULE)) SRC_S = supervisor/cpu.s -SRC_C = \ +SRC_C += \ background.c \ fatfs_port.c \ mphalport.c \ diff --git a/ports/esp32s2/boards/adafruit_metro_esp32s2/sdkconfig b/ports/esp32s2/boards/adafruit_metro_esp32s2/sdkconfig index 9d8bbde96..80b9a2cf8 100644 --- a/ports/esp32s2/boards/adafruit_metro_esp32s2/sdkconfig +++ b/ports/esp32s2/boards/adafruit_metro_esp32s2/sdkconfig @@ -31,3 +31,9 @@ CONFIG_SPIRAM_USE_MEMMAP=y CONFIG_SPIRAM_MEMTEST=y # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set # end of SPI RAM config + +# +# LWIP +# +CONFIG_LWIP_LOCAL_HOSTNAME="Metro-ESP32S2" +# end of LWIP diff --git a/ports/esp32s2/boards/microdev_micro_s2/sdkconfig b/ports/esp32s2/boards/microdev_micro_s2/sdkconfig index 67ac6d2f3..4b8cc5cc3 100644 --- a/ports/esp32s2/boards/microdev_micro_s2/sdkconfig +++ b/ports/esp32s2/boards/microdev_micro_s2/sdkconfig @@ -32,3 +32,8 @@ CONFIG_SPIRAM_MEMTEST=y # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set # end of SPI RAM config +# +# LWIP +# +CONFIG_LWIP_LOCAL_HOSTNAME="microS2" +# end of LWIP diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/sdkconfig b/ports/esp32s2/boards/unexpectedmaker_feathers2/sdkconfig index 67ac6d2f3..c9d44460c 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/sdkconfig +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/sdkconfig @@ -32,3 +32,8 @@ CONFIG_SPIRAM_MEMTEST=y # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set # end of SPI RAM config +# +# LWIP +# +CONFIG_LWIP_LOCAL_HOSTNAME="UMFeatherS2" +# end of LWIP diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/sdkconfig b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/sdkconfig index b73c4a8c2..00e0bb256 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/sdkconfig +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/sdkconfig @@ -33,3 +33,9 @@ CONFIG_SPIRAM_USE_MEMMAP=y CONFIG_SPIRAM_MEMTEST=y # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set # end of SPI RAM config + +# +# LWIP +# +CONFIG_LWIP_LOCAL_HOSTNAME="UMFeatherS2" +# end of LWIP diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index b62ad611b..5e349c09d 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -104,6 +104,19 @@ void common_hal_wifi_radio_stop_scanning_networks(wifi_radio_obj_t *self) { self->current_scan = NULL; } +mp_obj_t common_hal_wifi_radio_get_hostname(wifi_radio_obj_t *self) { + const char *hostname = NULL; + esp_netif_get_hostname(self->netif, &hostname); + if (hostname == NULL) { + return mp_const_none; + } + return mp_obj_new_str(hostname, strlen(hostname)); +} + +void common_hal_wifi_radio_set_hostname(wifi_radio_obj_t *self, const char *hostname) { + esp_netif_set_hostname(self->netif, hostname); +} + wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t* ssid, size_t ssid_len, uint8_t* password, size_t password_len, uint8_t channel, mp_float_t timeout, uint8_t* bssid, size_t bssid_len) { // check enabled start_station(self); diff --git a/ports/litex/mpconfigport.h b/ports/litex/mpconfigport.h index fcf9d3b73..a7caf8526 100644 --- a/ports/litex/mpconfigport.h +++ b/ports/litex/mpconfigport.h @@ -30,7 +30,6 @@ #define CIRCUITPY_INTERNAL_NVM_SIZE (0) #define MICROPY_NLR_THUMB (0) -#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (1) #define MICROPY_PY_REVERSE_SPECIAL_METHODS (1) #define MICROPY_PY_UBINASCII (1) #define MICROPY_PY_UJSON (1) diff --git a/ports/litex/mpconfigport.mk b/ports/litex/mpconfigport.mk index 427e9ea84..485a75fde 100644 --- a/ports/litex/mpconfigport.mk +++ b/ports/litex/mpconfigport.mk @@ -16,6 +16,7 @@ CIRCUITPY_ANALOGIO = 0 CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_AUDIOIO = 0 CIRCUITPY_BITBANGIO = 0 +CIRCUITPY_BLEIO_HCI = 0 CIRCUITPY_BOARD = 0 CIRCUITPY_BUSIO = 0 CIRCUITPY_COUNTIO = 0 diff --git a/ports/litex/supervisor/port.c b/ports/litex/supervisor/port.c index e55eb49f0..02617b9af 100644 --- a/ports/litex/supervisor/port.c +++ b/ports/litex/supervisor/port.c @@ -128,7 +128,11 @@ uint32_t port_get_saved_word(void) { } uint64_t port_get_raw_ticks(uint8_t* subticks) { - return raw_ticks; + // Reading 64 bits may take two loads, so turn of interrupts while we do it. + irq_setie(false); + uint64_t raw_tick_snapshot = raw_ticks; + irq_setie(true); + return raw_tick_snapshot; } // Enable 1/1024 second tick. diff --git a/ports/mimxrt10xx/Makefile b/ports/mimxrt10xx/Makefile index 12c9bde4f..a17e5f703 100644 --- a/ports/mimxrt10xx/Makefile +++ b/ports/mimxrt10xx/Makefile @@ -147,7 +147,7 @@ SRC_SDK := \ SRC_SDK := $(addprefix sdk/devices/$(CHIP_FAMILY)/, $(SRC_SDK)) -SRC_C = \ +SRC_C += \ background.c \ boards/$(BOARD)/board.c \ boards/$(BOARD)/flash_config.c \ diff --git a/ports/mimxrt10xx/mpconfigport.h b/ports/mimxrt10xx/mpconfigport.h index 7e7df0123..7496256d0 100644 --- a/ports/mimxrt10xx/mpconfigport.h +++ b/ports/mimxrt10xx/mpconfigport.h @@ -40,7 +40,6 @@ extern uint8_t _ld_default_stack_size; // 20kiB stack #define CIRCUITPY_DEFAULT_STACK_SIZE ((uint32_t) &_ld_default_stack_size) #define MICROPY_PY_BUILTINS_NOTIMPLEMENTED (0) -#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (0) #define MICROPY_PY_FUNCTION_ATTRS (0) #define MICROPY_PY_IO (1) #define MICROPY_PY_UJSON (1) diff --git a/ports/nrf/mpconfigport.h b/ports/nrf/mpconfigport.h index 36a9819dc..4ed42cd82 100644 --- a/ports/nrf/mpconfigport.h +++ b/ports/nrf/mpconfigport.h @@ -34,7 +34,6 @@ #include "nrf_sdm.h" // for SD_FLASH_SIZE #include "peripherals/nrf/nvm.h" // for FLASH_PAGE_SIZE -#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (1) #define MICROPY_PY_FUNCTION_ATTRS (1) #define MICROPY_PY_IO (1) #define MICROPY_PY_REVERSE_SPECIAL_METHODS (1) diff --git a/ports/nrf/mpconfigport.mk b/ports/nrf/mpconfigport.mk index ed689545d..9560064fb 100644 --- a/ports/nrf/mpconfigport.mk +++ b/ports/nrf/mpconfigport.mk @@ -23,6 +23,9 @@ CIRCUITPY_AUDIOCORE ?= 1 CIRCUITPY_AUDIOMIXER ?= 1 CIRCUITPY_AUDIOPWMIO ?= 1 +# Native BLEIO is not compatible with HCI _bleio. +CIRCUITPY_BLEIO_HCI = 0 + CIRCUITPY_BLEIO ?= 1 # No I2CPeripheral implementation diff --git a/ports/nrf/supervisor/port.c b/ports/nrf/supervisor/port.c index bc8b47be7..493de43e0 100644 --- a/ports/nrf/supervisor/port.c +++ b/ports/nrf/supervisor/port.c @@ -274,11 +274,15 @@ uint32_t port_get_saved_word(void) { } uint64_t port_get_raw_ticks(uint8_t* subticks) { + common_hal_mcu_disable_interrupts(); uint32_t rtc = nrfx_rtc_counter_get(&rtc_instance); + uint32_t overflow_count = overflow_tracker.overflowed_ticks; + common_hal_mcu_enable_interrupts(); + if (subticks != NULL) { *subticks = (rtc % 32); } - return overflow_tracker.overflowed_ticks + rtc / 32; + return overflow_count + rtc / 32; } // Enable 1/1024 second tick. diff --git a/ports/stm/boards/thunderpack/mpconfigboard.mk b/ports/stm/boards/thunderpack/mpconfigboard.mk index bb50f8710..d303582e0 100644 --- a/ports/stm/boards/thunderpack/mpconfigboard.mk +++ b/ports/stm/boards/thunderpack/mpconfigboard.mk @@ -7,6 +7,7 @@ INTERNAL_FLASH_FILESYSTEM = 1 LONGINT_IMPL = NONE CIRCUITPY_NVM = 1 +CIRCUITPY_BLEIO_HCI = 0 MCU_SERIES = F4 MCU_VARIANT = STM32F411xE diff --git a/ports/stm/mpconfigport.h b/ports/stm/mpconfigport.h index e054ffbb5..9489b4765 100644 --- a/ports/stm/mpconfigport.h +++ b/ports/stm/mpconfigport.h @@ -30,7 +30,6 @@ #include <stdint.h> -#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (1) #define MICROPY_PY_FUNCTION_ATTRS (1) #define MICROPY_PY_IO (1) #define MICROPY_PY_REVERSE_SPECIAL_METHODS (1) diff --git a/ports/stm/supervisor/port.c b/ports/stm/supervisor/port.c index bb304a317..a8aab00ff 100644 --- a/ports/stm/supervisor/port.c +++ b/ports/stm/supervisor/port.c @@ -190,6 +190,7 @@ safe_mode_t port_init(void) { _hrtc.Init.OutPut = RTC_OUTPUT_DISABLE; HAL_RTC_Init(&_hrtc); + HAL_RTCEx_EnableBypassShadow(&_hrtc); HAL_NVIC_EnableIRQ(RTC_Alarm_IRQn); // Turn off SysTick @@ -328,9 +329,23 @@ volatile uint32_t cached_date = 0; volatile uint32_t seconds_to_minute = 0; volatile uint32_t cached_hours_minutes = 0; uint64_t port_get_raw_ticks(uint8_t* subticks) { - uint32_t subseconds = rtc_clock_frequency - (uint32_t)(RTC->SSR); + // Disable IRQs to ensure we read all of the RTC registers as close in time as possible. Read + // SSR twice to make sure we didn't read across a tick. + __disable_irq(); + uint32_t first_ssr = (uint32_t)(RTC->SSR); uint32_t time = (uint32_t)(RTC->TR & RTC_TR_RESERVED_MASK); uint32_t date = (uint32_t)(RTC->DR & RTC_DR_RESERVED_MASK); + uint32_t ssr = (uint32_t)(RTC->SSR); + while (ssr != first_ssr) { + first_ssr = ssr; + time = (uint32_t)(RTC->TR & RTC_TR_RESERVED_MASK); + date = (uint32_t)(RTC->DR & RTC_DR_RESERVED_MASK); + ssr = (uint32_t)(RTC->SSR); + } + __enable_irq(); + + uint32_t subseconds = rtc_clock_frequency - 1 - ssr; + if (date != cached_date) { uint32_t year = (uint8_t)((date & (RTC_DR_YT | RTC_DR_YU)) >> 16U); uint8_t month = (uint8_t)((date & (RTC_DR_MT | RTC_DR_MU)) >> 8U); @@ -349,6 +364,7 @@ uint64_t port_get_raw_ticks(uint8_t* subticks) { hours = (uint8_t)RTC_Bcd2ToByte(hours); minutes = (uint8_t)RTC_Bcd2ToByte(minutes); seconds_to_minute = 60 * (60 * hours + minutes); + cached_hours_minutes = hours_minutes; } uint8_t seconds = (uint8_t)(time & (RTC_TR_ST | RTC_TR_SU)); seconds = (uint8_t)RTC_Bcd2ToByte(seconds); @@ -407,7 +423,7 @@ void port_interrupt_after_ticks(uint32_t ticks) { alarm.AlarmMask = RTC_ALARMMASK_ALL; } - alarm.AlarmTime.SubSeconds = rtc_clock_frequency - + alarm.AlarmTime.SubSeconds = rtc_clock_frequency - 1 - ((raw_ticks % 1024) * 32); alarm.AlarmTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE; alarm.AlarmTime.StoreOperation = RTC_STOREOPERATION_SET; diff --git a/ports/unix/Makefile b/ports/unix/Makefile index 5d4b168fe..4bfb13c6a 100644 --- a/ports/unix/Makefile +++ b/ports/unix/Makefile @@ -134,7 +134,7 @@ SRC_MOD += modjni.c endif # source files -SRC_C = \ +SRC_C += \ main.c \ gccollect.c \ unix_mphal.c \ diff --git a/ports/unix/mpconfigport.h b/ports/unix/mpconfigport.h index 3ae4ff786..d6bbad9ce 100644 --- a/ports/unix/mpconfigport.h +++ b/ports/unix/mpconfigport.h @@ -99,7 +99,6 @@ #define MICROPY_PY_SYS_STDFILES (1) #define MICROPY_PY_SYS_EXC_INFO (1) #define MICROPY_PY_COLLECTIONS_DEQUE (1) -#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (1) #ifndef MICROPY_PY_MATH_SPECIAL_FUNCTIONS #define MICROPY_PY_MATH_SPECIAL_FUNCTIONS (1) #endif diff --git a/ports/unix/mpconfigport_coverage.h b/ports/unix/mpconfigport_coverage.h index 51015a587..468d69a73 100644 --- a/ports/unix/mpconfigport_coverage.h +++ b/ports/unix/mpconfigport_coverage.h @@ -49,7 +49,6 @@ #define MICROPY_VFS_FAT (1) #define MICROPY_FATFS_USE_LABEL (1) #define MICROPY_PY_FRAMEBUF (1) -#define MICROPY_PY_COLLECTIONS_NAMEDTUPLE__ASDICT (1) // TODO these should be generic, not bound to fatfs #define mp_type_fileio mp_type_vfs_posix_fileio diff --git a/py/circuitpy_mpconfig.h b/py/circuitpy_mpconfig.h index 5ffdd4c8f..1e01bd9c5 100644 --- a/py/circuitpy_mpconfig.h +++ b/py/circuitpy_mpconfig.h @@ -194,6 +194,9 @@ typedef long mp_off_t; #define MICROPY_PY_BUILTINS_STR_PARTITION (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_STR_SPLITLINES (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_UERRNO (CIRCUITPY_FULL_BUILD) +#ifndef MICROPY_PY_COLLECTIONS_ORDEREDDICT +#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (CIRCUITPY_FULL_BUILD) +#endif // Opposite setting is deliberate. #define MICROPY_PY_UERRNO_ERRORCODE (!CIRCUITPY_FULL_BUILD) #ifndef MICROPY_PY_URE diff --git a/py/circuitpy_mpconfig.mk b/py/circuitpy_mpconfig.mk index 91850448d..a6aabec33 100644 --- a/py/circuitpy_mpconfig.mk +++ b/py/circuitpy_mpconfig.mk @@ -79,14 +79,14 @@ CFLAGS += -DCIRCUITPY_AUDIOMP3=$(CIRCUITPY_AUDIOMP3) CIRCUITPY_BITBANGIO ?= $(CIRCUITPY_FULL_BUILD) CFLAGS += -DCIRCUITPY_BITBANGIO=$(CIRCUITPY_BITBANGIO) -# Explicitly enabled for boards that support _bleio. -CIRCUITPY_BLEIO ?= 0 -CFLAGS += -DCIRCUITPY_BLEIO=$(CIRCUITPY_BLEIO) - # _bleio can be supported on most any board via HCI -CIRCUITPY_BLEIO_HCI ?= 0 +CIRCUITPY_BLEIO_HCI ?= $(CIRCUITPY_FULL_BUILD) CFLAGS += -DCIRCUITPY_BLEIO_HCI=$(CIRCUITPY_BLEIO_HCI) +# Explicitly enabled for boards that support _bleio. +CIRCUITPY_BLEIO ?= $(CIRCUITPY_BLEIO_HCI) +CFLAGS += -DCIRCUITPY_BLEIO=$(CIRCUITPY_BLEIO) + CIRCUITPY_BOARD ?= 1 CFLAGS += -DCIRCUITPY_BOARD=$(CIRCUITPY_BOARD) diff --git a/py/objnamedtuple.c b/py/objnamedtuple.c index 6c36909e7..ab2f2f3c0 100644 --- a/py/objnamedtuple.c +++ b/py/objnamedtuple.c @@ -46,7 +46,7 @@ size_t mp_obj_namedtuple_find_field(const mp_obj_namedtuple_type_t *type, qstr n return (size_t)-1; } -#if MICROPY_PY_COLLECTIONS_NAMEDTUPLE__ASDICT +#if MICROPY_PY_COLLECTIONS_ORDEREDDICT STATIC mp_obj_t namedtuple_asdict(mp_obj_t self_in) { mp_obj_namedtuple_t *self = MP_OBJ_TO_PTR(self_in); const qstr *fields = ((mp_obj_namedtuple_type_t*)self->tuple.base.type)->fields; diff --git a/shared-bindings/wifi/Radio.c b/shared-bindings/wifi/Radio.c index 928f21da9..b548d66f6 100644 --- a/shared-bindings/wifi/Radio.c +++ b/shared-bindings/wifi/Radio.c @@ -24,11 +24,13 @@ * THE SOFTWARE. */ +#include "shared-bindings/wifi/__init__.h" + +#include <regex.h> #include <string.h> -#include "py/objproperty.h" #include "py/runtime.h" -#include "shared-bindings/wifi/__init__.h" +#include "py/objproperty.h" //| class Radio: //| """Native wifi radio. @@ -50,7 +52,6 @@ //| STATIC mp_obj_t wifi_radio_get_enabled(mp_obj_t self) { return mp_obj_new_bool(common_hal_wifi_radio_get_enabled(self)); - } MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_enabled_obj, wifi_radio_get_enabled); @@ -102,6 +103,45 @@ STATIC mp_obj_t wifi_radio_stop_scanning_networks(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_stop_scanning_networks_obj, wifi_radio_stop_scanning_networks); +//| hostname: ReadableBuffer +//| """Hostname for wifi interface. When the hostname is altered after interface started/connected +//| the changes would only be reflected once the interface restarts/reconnects.""" +//| +STATIC mp_obj_t wifi_radio_get_hostname(mp_obj_t self_in) { + wifi_radio_obj_t *self = MP_OBJ_TO_PTR(self_in); + return common_hal_wifi_radio_get_hostname(self); +} +MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_hostname_obj, wifi_radio_get_hostname); + +STATIC mp_obj_t wifi_radio_set_hostname(mp_obj_t self_in, mp_obj_t hostname_in) { + mp_buffer_info_t hostname; + mp_get_buffer_raise(hostname_in, &hostname, MP_BUFFER_READ); + + if (hostname.len < 1 || hostname.len > 253) { + mp_raise_ValueError(translate("Hostname must be between 1 and 253 characters")); + } + + regex_t regex; //validate hostname according to RFC 1123 + regcomp(®ex,"^(([a-z0-9]|[a-z0-9][a-z0-9\\-]{0,61}[a-z0-9])\\.)*([a-z0-9]|[a-z0-9][a-z0-9\\-]{0,61}[a-z0-9])$", REG_EXTENDED | REG_ICASE | REG_NOSUB); + if (regexec(®ex, hostname.buf, 0, NULL, 0)) { + mp_raise_ValueError(translate("invalid hostname")); + } + regfree(®ex); + + wifi_radio_obj_t *self = MP_OBJ_TO_PTR(self_in); + common_hal_wifi_radio_set_hostname(self, hostname.buf); + + return mp_const_none; +} +MP_DEFINE_CONST_FUN_OBJ_2(wifi_radio_set_hostname_obj, wifi_radio_set_hostname); + +const mp_obj_property_t wifi_radio_hostname_obj = { + .base.type = &mp_type_property, + .proxy = {(mp_obj_t)&wifi_radio_get_hostname_obj, + (mp_obj_t)&wifi_radio_set_hostname_obj, + (mp_obj_t)&mp_const_none_obj}, +}; + //| def connect(self, ssid: ReadableBuffer, password: ReadableBuffer = b"", *, channel: Optional[int] = 0, timeout: Optional[float] = None) -> bool: //| """Connects to the given ssid and waits for an ip address. Reconnections are handled //| automatically once one connection succeeds.""" @@ -216,6 +256,8 @@ STATIC const mp_rom_map_elem_t wifi_radio_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_start_scanning_networks), MP_ROM_PTR(&wifi_radio_start_scanning_networks_obj) }, { MP_ROM_QSTR(MP_QSTR_stop_scanning_networks), MP_ROM_PTR(&wifi_radio_stop_scanning_networks_obj) }, + { MP_ROM_QSTR(MP_QSTR_hostname), MP_ROM_PTR(&wifi_radio_hostname_obj) }, + { MP_ROM_QSTR(MP_QSTR_connect), MP_ROM_PTR(&wifi_radio_connect_obj) }, // { MP_ROM_QSTR(MP_QSTR_connect_to_enterprise), MP_ROM_PTR(&wifi_radio_connect_to_enterprise_obj) }, diff --git a/shared-bindings/wifi/Radio.h b/shared-bindings/wifi/Radio.h index b5341d51c..a6a616154 100644 --- a/shared-bindings/wifi/Radio.h +++ b/shared-bindings/wifi/Radio.h @@ -35,7 +35,6 @@ const mp_obj_type_t wifi_radio_type; - typedef enum { WIFI_RADIO_ERROR_NONE, WIFI_RADIO_ERROR_UNKNOWN, @@ -46,6 +45,9 @@ typedef enum { extern bool common_hal_wifi_radio_get_enabled(wifi_radio_obj_t *self); extern void common_hal_wifi_radio_set_enabled(wifi_radio_obj_t *self, bool enabled); +extern mp_obj_t common_hal_wifi_radio_get_hostname(wifi_radio_obj_t *self); +extern void common_hal_wifi_radio_set_hostname(wifi_radio_obj_t *self, const char *hostname); + extern mp_obj_t common_hal_wifi_radio_get_mac_address(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_start_scanning_networks(wifi_radio_obj_t *self); diff --git a/shared-module/displayio/Display.c b/shared-module/displayio/Display.c index 499c00ffb..7c8c9280b 100644 --- a/shared-module/displayio/Display.c +++ b/shared-module/displayio/Display.c @@ -347,8 +347,10 @@ void common_hal_displayio_display_set_rotation(displayio_display_obj_t* self, in self->core.height = tmp; } displayio_display_core_set_rotation(&self->core, rotation); - supervisor_stop_terminal(); - supervisor_start_terminal(self->core.width, self->core.height); + if (self == &displays[0].display) { + supervisor_stop_terminal(); + supervisor_start_terminal(self->core.width, self->core.height); + } if (self->core.current_group != NULL) { displayio_group_update_transform(self->core.current_group, &self->core.transform); } diff --git a/shared-module/displayio/display_core.c b/shared-module/displayio/display_core.c index 60a8ef213..411f9f373 100644 --- a/shared-module/displayio/display_core.c +++ b/shared-module/displayio/display_core.c @@ -85,7 +85,10 @@ void displayio_display_core_construct(displayio_display_core_t* self, self->bus = bus; - supervisor_start_terminal(width, height); + // (offsetof core is equal in all display types) + if (self == &displays[0].display.core) { + supervisor_start_terminal(width, height); + } self->width = width; self->height = height; diff --git a/shared-module/framebufferio/FramebufferDisplay.c b/shared-module/framebufferio/FramebufferDisplay.c index 6b506c7fa..03e121c91 100644 --- a/shared-module/framebufferio/FramebufferDisplay.c +++ b/shared-module/framebufferio/FramebufferDisplay.c @@ -280,8 +280,10 @@ void common_hal_framebufferio_framebufferdisplay_set_rotation(framebufferio_fram self->core.height = tmp; } displayio_display_core_set_rotation(&self->core, rotation); - supervisor_stop_terminal(); - supervisor_start_terminal(self->core.width, self->core.height); + if (self == &displays[0].framebuffer_display) { + supervisor_stop_terminal(); + supervisor_start_terminal(self->core.width, self->core.height); + } if (self->core.current_group != NULL) { displayio_group_update_transform(self->core.current_group, &self->core.transform); } diff --git a/supervisor/shared/tick.c b/supervisor/shared/tick.c index 91ffa307d..a2855a570 100644 --- a/supervisor/shared/tick.c +++ b/supervisor/shared/tick.c @@ -125,9 +125,7 @@ void supervisor_tick(void) { uint64_t supervisor_ticks_ms64() { uint64_t result; - common_hal_mcu_disable_interrupts(); result = port_get_raw_ticks(NULL); - common_hal_mcu_enable_interrupts(); result = result * 1000 / 1024; return result; } |