diff options
| -rw-r--r-- | ports/nrf/boards/feather_nrf52840_express/mpconfigboard.mk | 2 | ||||
| -rw-r--r-- | ports/nrf/supervisor/qspi_flash.c | 18 | ||||
| -rw-r--r-- | supervisor/shared/external_flash/devices.h | 2 |
3 files changed, 17 insertions, 5 deletions
diff --git a/ports/nrf/boards/feather_nrf52840_express/mpconfigboard.mk b/ports/nrf/boards/feather_nrf52840_express/mpconfigboard.mk index bc511e150..905921a5d 100644 --- a/ports/nrf/boards/feather_nrf52840_express/mpconfigboard.mk +++ b/ports/nrf/boards/feather_nrf52840_express/mpconfigboard.mk @@ -20,6 +20,6 @@ endif NRF_DEFINES += -DNRF52840_XXAA -DNRF52840 -SPI_FLASH_FILESYSTEM = 1 +QSPI_FLASH_FILESYSTEM = 1 EXTERNAL_FLASH_DEVICE_COUNT = 1 EXTERNAL_FLASH_DEVICES = "GD25Q16C" diff --git a/ports/nrf/supervisor/qspi_flash.c b/ports/nrf/supervisor/qspi_flash.c index 24b06c420..048db06f2 100644 --- a/ports/nrf/supervisor/qspi_flash.c +++ b/ports/nrf/supervisor/qspi_flash.c @@ -115,7 +115,7 @@ void spi_flash_init(void) { .dpmconfig = false }, .phy_if = { - .sck_freq = NRF_QSPI_FREQ_32MDIV16, + .sck_freq = NRF_QSPI_FREQ_32MDIV16, // Start at a slow 2mhz and speed up once we know what we're talking to. .sck_delay = 10, // min time CS must stay high before going low again. in unit of 62.5 ns .spi_mode = NRF_QSPI_MODE_0, .dpmen = false @@ -132,7 +132,7 @@ void spi_flash_init(void) { qspi_cfg.pins.io2_pin = MICROPY_QSPI_DATA2; qspi_cfg.pins.io3_pin = MICROPY_QSPI_DATA3; qspi_cfg.prot_if.readoc = NRF_QSPI_READOC_READ4IO; - qspi_cfg.prot_if.writeoc = NRF_QSPI_WRITEOC_PP4IO; + qspi_cfg.prot_if.writeoc = NRF_QSPI_WRITEOC_PP4O; #endif // No callback for blocking API @@ -142,5 +142,17 @@ void spi_flash_init(void) { void spi_flash_init_device(const external_flash_device* device) { check_quad_enable(device); - // TODO(tannewt): Adjust the speed for the found device. + // Switch to single output line if the device doesn't support quad programs. + if (!device->supports_qspi_writes) { + NRF_QSPI->IFCONFIG0 &= ~QSPI_IFCONFIG0_WRITEOC_Msk; + NRF_QSPI->IFCONFIG0 |= QSPI_IFCONFIG0_WRITEOC_PP; + } + + // Speed up as much as we can. + uint8_t sckfreq = 0; + while (32000000 / (sckfreq + 1) > device->max_clock_speed_mhz * 1000000 && sckfreq < 16) { + sckfreq += 1; + } + NRF_QSPI->IFCONFIG1 &= ~QSPI_IFCONFIG1_SCKFREQ_Msk; + NRF_QSPI->IFCONFIG1 |= sckfreq << QSPI_IFCONFIG1_SCKDELAY_Pos; } diff --git a/supervisor/shared/external_flash/devices.h b/supervisor/shared/external_flash/devices.h index 06fc178cb..86e0868d0 100644 --- a/supervisor/shared/external_flash/devices.h +++ b/supervisor/shared/external_flash/devices.h @@ -86,7 +86,7 @@ typedef struct { } // Settings for the Gigadevice GD25Q16C 2MiB SPI flash. -// Datasheet: http://www.gigadevice.com/wp-content/uploads/2017/12/DS-00086-GD25Q16C-Rev2.6.pdf +// Datasheet: http://www.gigadevice.com/datasheet/gd25q16c/ #define GD25Q16C {\ .total_size = (1 << 21), /* 2 MiB */ \ .start_up_time_us = 5000, \ |