diff options
Diffstat (limited to 'atmel-samd/asf4/samd51/include/instance/sercom3.h')
| -rw-r--r-- | atmel-samd/asf4/samd51/include/instance/sercom3.h | 181 |
1 files changed, 0 insertions, 181 deletions
diff --git a/atmel-samd/asf4/samd51/include/instance/sercom3.h b/atmel-samd/asf4/samd51/include/instance/sercom3.h deleted file mode 100644 index 9edd4e924..000000000 --- a/atmel-samd/asf4/samd51/include/instance/sercom3.h +++ /dev/null @@ -1,181 +0,0 @@ -/** - * \file - * - * \brief Instance description for SERCOM3 - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - -#ifndef _SAMD51_SERCOM3_INSTANCE_ -#define _SAMD51_SERCOM3_INSTANCE_ - -/* ========== Register definition for SERCOM3 peripheral ========== */ -#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) -#define REG_SERCOM3_I2CM_CTRLA (0x41014000) /**< \brief (SERCOM3) I2CM Control A */ -#define REG_SERCOM3_I2CM_CTRLB (0x41014004) /**< \brief (SERCOM3) I2CM Control B */ -#define REG_SERCOM3_I2CM_CTRLC (0x41014008) /**< \brief (SERCOM3) I2CM Control C */ -#define REG_SERCOM3_I2CM_BAUD (0x4101400C) /**< \brief (SERCOM3) I2CM Baud Rate */ -#define REG_SERCOM3_I2CM_INTENCLR (0x41014014) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */ -#define REG_SERCOM3_I2CM_INTENSET (0x41014016) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */ -#define REG_SERCOM3_I2CM_INTFLAG (0x41014018) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */ -#define REG_SERCOM3_I2CM_STATUS (0x4101401A) /**< \brief (SERCOM3) I2CM Status */ -#define REG_SERCOM3_I2CM_SYNCBUSY (0x4101401C) /**< \brief (SERCOM3) I2CM Synchronization Busy */ -#define REG_SERCOM3_I2CM_ADDR (0x41014024) /**< \brief (SERCOM3) I2CM Address */ -#define REG_SERCOM3_I2CM_DATA (0x41014028) /**< \brief (SERCOM3) I2CM Data */ -#define REG_SERCOM3_I2CM_DBGCTRL (0x41014030) /**< \brief (SERCOM3) I2CM Debug Control */ -#define REG_SERCOM3_I2CS_CTRLA (0x41014000) /**< \brief (SERCOM3) I2CS Control A */ -#define REG_SERCOM3_I2CS_CTRLB (0x41014004) /**< \brief (SERCOM3) I2CS Control B */ -#define REG_SERCOM3_I2CS_CTRLC (0x41014008) /**< \brief (SERCOM3) I2CS Control C */ -#define REG_SERCOM3_I2CS_INTENCLR (0x41014014) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */ -#define REG_SERCOM3_I2CS_INTENSET (0x41014016) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */ -#define REG_SERCOM3_I2CS_INTFLAG (0x41014018) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */ -#define REG_SERCOM3_I2CS_STATUS (0x4101401A) /**< \brief (SERCOM3) I2CS Status */ -#define REG_SERCOM3_I2CS_SYNCBUSY (0x4101401C) /**< \brief (SERCOM3) I2CS Synchronization Busy */ -#define REG_SERCOM3_I2CS_LENGTH (0x41014022) /**< \brief (SERCOM3) I2CS Length */ -#define REG_SERCOM3_I2CS_ADDR (0x41014024) /**< \brief (SERCOM3) I2CS Address */ -#define REG_SERCOM3_I2CS_DATA (0x41014028) /**< \brief (SERCOM3) I2CS Data */ -#define REG_SERCOM3_SPI_CTRLA (0x41014000) /**< \brief (SERCOM3) SPI Control A */ -#define REG_SERCOM3_SPI_CTRLB (0x41014004) /**< \brief (SERCOM3) SPI Control B */ -#define REG_SERCOM3_SPI_CTRLC (0x41014008) /**< \brief (SERCOM3) SPI Control C */ -#define REG_SERCOM3_SPI_BAUD (0x4101400C) /**< \brief (SERCOM3) SPI Baud Rate */ -#define REG_SERCOM3_SPI_INTENCLR (0x41014014) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */ -#define REG_SERCOM3_SPI_INTENSET (0x41014016) /**< \brief (SERCOM3) SPI Interrupt Enable Set */ -#define REG_SERCOM3_SPI_INTFLAG (0x41014018) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */ -#define REG_SERCOM3_SPI_STATUS (0x4101401A) /**< \brief (SERCOM3) SPI Status */ -#define REG_SERCOM3_SPI_SYNCBUSY (0x4101401C) /**< \brief (SERCOM3) SPI Synchronization Busy */ -#define REG_SERCOM3_SPI_LENGTH (0x41014022) /**< \brief (SERCOM3) SPI Length */ -#define REG_SERCOM3_SPI_ADDR (0x41014024) /**< \brief (SERCOM3) SPI Address */ -#define REG_SERCOM3_SPI_DATA (0x41014028) /**< \brief (SERCOM3) SPI Data */ -#define REG_SERCOM3_SPI_DBGCTRL (0x41014030) /**< \brief (SERCOM3) SPI Debug Control */ -#define REG_SERCOM3_USART_CTRLA (0x41014000) /**< \brief (SERCOM3) USART Control A */ -#define REG_SERCOM3_USART_CTRLB (0x41014004) /**< \brief (SERCOM3) USART Control B */ -#define REG_SERCOM3_USART_CTRLC (0x41014008) /**< \brief (SERCOM3) USART Control C */ -#define REG_SERCOM3_USART_BAUD (0x4101400C) /**< \brief (SERCOM3) USART Baud Rate */ -#define REG_SERCOM3_USART_RXPL (0x4101400E) /**< \brief (SERCOM3) USART Receive Pulse Length */ -#define REG_SERCOM3_USART_INTENCLR (0x41014014) /**< \brief (SERCOM3) USART Interrupt Enable Clear */ -#define REG_SERCOM3_USART_INTENSET (0x41014016) /**< \brief (SERCOM3) USART Interrupt Enable Set */ -#define REG_SERCOM3_USART_INTFLAG (0x41014018) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */ -#define REG_SERCOM3_USART_STATUS (0x4101401A) /**< \brief (SERCOM3) USART Status */ -#define REG_SERCOM3_USART_SYNCBUSY (0x4101401C) /**< \brief (SERCOM3) USART Synchronization Busy */ -#define REG_SERCOM3_USART_RXERRCNT (0x41014020) /**< \brief (SERCOM3) USART Receive Error Count */ -#define REG_SERCOM3_USART_LENGTH (0x41014022) /**< \brief (SERCOM3) USART Length */ -#define REG_SERCOM3_USART_DATA (0x41014028) /**< \brief (SERCOM3) USART Data */ -#define REG_SERCOM3_USART_DBGCTRL (0x41014030) /**< \brief (SERCOM3) USART Debug Control */ -#else -#define REG_SERCOM3_I2CM_CTRLA (*(RwReg *)0x41014000UL) /**< \brief (SERCOM3) I2CM Control A */ -#define REG_SERCOM3_I2CM_CTRLB (*(RwReg *)0x41014004UL) /**< \brief (SERCOM3) I2CM Control B */ -#define REG_SERCOM3_I2CM_CTRLC (*(RwReg *)0x41014008UL) /**< \brief (SERCOM3) I2CM Control C */ -#define REG_SERCOM3_I2CM_BAUD (*(RwReg *)0x4101400CUL) /**< \brief (SERCOM3) I2CM Baud Rate */ -#define REG_SERCOM3_I2CM_INTENCLR (*(RwReg8 *)0x41014014UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */ -#define REG_SERCOM3_I2CM_INTENSET (*(RwReg8 *)0x41014016UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */ -#define REG_SERCOM3_I2CM_INTFLAG (*(RwReg8 *)0x41014018UL) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */ -#define REG_SERCOM3_I2CM_STATUS (*(RwReg16*)0x4101401AUL) /**< \brief (SERCOM3) I2CM Status */ -#define REG_SERCOM3_I2CM_SYNCBUSY (*(RoReg *)0x4101401CUL) /**< \brief (SERCOM3) I2CM Synchronization Busy */ -#define REG_SERCOM3_I2CM_ADDR (*(RwReg *)0x41014024UL) /**< \brief (SERCOM3) I2CM Address */ -#define REG_SERCOM3_I2CM_DATA (*(RwReg *)0x41014028UL) /**< \brief (SERCOM3) I2CM Data */ -#define REG_SERCOM3_I2CM_DBGCTRL (*(RwReg8 *)0x41014030UL) /**< \brief (SERCOM3) I2CM Debug Control */ -#define REG_SERCOM3_I2CS_CTRLA (*(RwReg *)0x41014000UL) /**< \brief (SERCOM3) I2CS Control A */ -#define REG_SERCOM3_I2CS_CTRLB (*(RwReg *)0x41014004UL) /**< \brief (SERCOM3) I2CS Control B */ -#define REG_SERCOM3_I2CS_CTRLC (*(RwReg *)0x41014008UL) /**< \brief (SERCOM3) I2CS Control C */ -#define REG_SERCOM3_I2CS_INTENCLR (*(RwReg8 *)0x41014014UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */ -#define REG_SERCOM3_I2CS_INTENSET (*(RwReg8 *)0x41014016UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */ -#define REG_SERCOM3_I2CS_INTFLAG (*(RwReg8 *)0x41014018UL) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */ -#define REG_SERCOM3_I2CS_STATUS (*(RwReg16*)0x4101401AUL) /**< \brief (SERCOM3) I2CS Status */ -#define REG_SERCOM3_I2CS_SYNCBUSY (*(RoReg *)0x4101401CUL) /**< \brief (SERCOM3) I2CS Synchronization Busy */ -#define REG_SERCOM3_I2CS_LENGTH (*(RwReg16*)0x41014022UL) /**< \brief (SERCOM3) I2CS Length */ -#define REG_SERCOM3_I2CS_ADDR (*(RwReg *)0x41014024UL) /**< \brief (SERCOM3) I2CS Address */ -#define REG_SERCOM3_I2CS_DATA (*(RwReg *)0x41014028UL) /**< \brief (SERCOM3) I2CS Data */ -#define REG_SERCOM3_SPI_CTRLA (*(RwReg *)0x41014000UL) /**< \brief (SERCOM3) SPI Control A */ -#define REG_SERCOM3_SPI_CTRLB (*(RwReg *)0x41014004UL) /**< \brief (SERCOM3) SPI Control B */ -#define REG_SERCOM3_SPI_CTRLC (*(RwReg *)0x41014008UL) /**< \brief (SERCOM3) SPI Control C */ -#define REG_SERCOM3_SPI_BAUD (*(RwReg8 *)0x4101400CUL) /**< \brief (SERCOM3) SPI Baud Rate */ -#define REG_SERCOM3_SPI_INTENCLR (*(RwReg8 *)0x41014014UL) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */ -#define REG_SERCOM3_SPI_INTENSET (*(RwReg8 *)0x41014016UL) /**< \brief (SERCOM3) SPI Interrupt Enable Set */ -#define REG_SERCOM3_SPI_INTFLAG (*(RwReg8 *)0x41014018UL) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */ -#define REG_SERCOM3_SPI_STATUS (*(RwReg16*)0x4101401AUL) /**< \brief (SERCOM3) SPI Status */ -#define REG_SERCOM3_SPI_SYNCBUSY (*(RoReg *)0x4101401CUL) /**< \brief (SERCOM3) SPI Synchronization Busy */ -#define REG_SERCOM3_SPI_LENGTH (*(RwReg16*)0x41014022UL) /**< \brief (SERCOM3) SPI Length */ -#define REG_SERCOM3_SPI_ADDR (*(RwReg *)0x41014024UL) /**< \brief (SERCOM3) SPI Address */ -#define REG_SERCOM3_SPI_DATA (*(RwReg *)0x41014028UL) /**< \brief (SERCOM3) SPI Data */ -#define REG_SERCOM3_SPI_DBGCTRL (*(RwReg8 *)0x41014030UL) /**< \brief (SERCOM3) SPI Debug Control */ -#define REG_SERCOM3_USART_CTRLA (*(RwReg *)0x41014000UL) /**< \brief (SERCOM3) USART Control A */ -#define REG_SERCOM3_USART_CTRLB (*(RwReg *)0x41014004UL) /**< \brief (SERCOM3) USART Control B */ -#define REG_SERCOM3_USART_CTRLC (*(RwReg *)0x41014008UL) /**< \brief (SERCOM3) USART Control C */ -#define REG_SERCOM3_USART_BAUD (*(RwReg16*)0x4101400CUL) /**< \brief (SERCOM3) USART Baud Rate */ -#define REG_SERCOM3_USART_RXPL (*(RwReg8 *)0x4101400EUL) /**< \brief (SERCOM3) USART Receive Pulse Length */ -#define REG_SERCOM3_USART_INTENCLR (*(RwReg8 *)0x41014014UL) /**< \brief (SERCOM3) USART Interrupt Enable Clear */ -#define REG_SERCOM3_USART_INTENSET (*(RwReg8 *)0x41014016UL) /**< \brief (SERCOM3) USART Interrupt Enable Set */ -#define REG_SERCOM3_USART_INTFLAG (*(RwReg8 *)0x41014018UL) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */ -#define REG_SERCOM3_USART_STATUS (*(RwReg16*)0x4101401AUL) /**< \brief (SERCOM3) USART Status */ -#define REG_SERCOM3_USART_SYNCBUSY (*(RoReg *)0x4101401CUL) /**< \brief (SERCOM3) USART Synchronization Busy */ -#define REG_SERCOM3_USART_RXERRCNT (*(RoReg8 *)0x41014020UL) /**< \brief (SERCOM3) USART Receive Error Count */ -#define REG_SERCOM3_USART_LENGTH (*(RwReg16*)0x41014022UL) /**< \brief (SERCOM3) USART Length */ -#define REG_SERCOM3_USART_DATA (*(RwReg *)0x41014028UL) /**< \brief (SERCOM3) USART Data */ -#define REG_SERCOM3_USART_DBGCTRL (*(RwReg8 *)0x41014030UL) /**< \brief (SERCOM3) USART Debug Control */ -#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ - -/* ========== Instance parameters for SERCOM3 peripheral ========== */ -#define SERCOM3_CLK_REDUCTION 1 // Reduce clock options to pin 1 for SPI and USART -#define SERCOM3_DLY_COMPENSATION 1 // Compensates for a fast DLY50 element. Assuming 20ns -#define SERCOM3_DMA 1 // DMA support implemented? -#define SERCOM3_DMAC_ID_RX 10 // Index of DMA RX trigger -#define SERCOM3_DMAC_ID_TX 11 // Index of DMA TX trigger -#define SERCOM3_FIFO_DEPTH_POWER 1 // 2^FIFO_DEPTH_POWER gives rx FIFO depth. -#define SERCOM3_GCLK_ID_CORE 24 -#define SERCOM3_GCLK_ID_SLOW 3 -#define SERCOM3_INT_MSB 6 -#define SERCOM3_PMSB 3 -#define SERCOM3_RETENTION_SUPPORT 0 // Retention supported? -#define SERCOM3_SE_CNT 1 // SE counter included? -#define SERCOM3_SPI 1 // SPI mode implemented? -#define SERCOM3_SPI_HW_SS_CTRL 1 // Master _SS hardware control implemented? -#define SERCOM3_SPI_ICSPACE_EXT 1 // SPI inter character space implemented? -#define SERCOM3_SPI_OZMO 0 // OZMO features implemented? -#define SERCOM3_SPI_WAKE_ON_SSL 1 // _SS low detect implemented? -#define SERCOM3_TTBIT_EXTENSION 1 // 32-bit extension implemented? -#define SERCOM3_TWIM 1 // TWI Master mode implemented? -#define SERCOM3_TWIS 1 // TWI Slave mode implemented? -#define SERCOM3_TWIS_AUTO_ACK 1 // TWI slave automatic acknowledge implemented? -#define SERCOM3_TWIS_GROUP_CMD 1 // TWI slave group command implemented? -#define SERCOM3_TWIS_SDASETUP_CNT_SIZE 8 // TWIS sda setup count size -#define SERCOM3_TWIS_SDASETUP_SIZE 4 // TWIS sda setup size -#define SERCOM3_TWIS_SUDAT 1 // TWI slave SDA setup implemented? -#define SERCOM3_TWI_FASTMP 1 // TWI fast mode plus implemented? -#define SERCOM3_TWI_HSMODE 1 // USART mode implemented? -#define SERCOM3_TWI_SCLSM_MODE 1 // TWI SCL clock stretch mode implemented? -#define SERCOM3_TWI_SMB_TIMEOUTS 1 // TWI SMBus timeouts implemented? -#define SERCOM3_TWI_TENBIT_ADR 1 // TWI ten bit enabled? -#define SERCOM3_USART 1 // USART mode implemented? -#define SERCOM3_USART_AUTOBAUD 1 // USART autobaud implemented? -#define SERCOM3_USART_COLDET 1 // USART collision detection implemented? -#define SERCOM3_USART_FLOW_CTRL 1 // USART flow control implemented? -#define SERCOM3_USART_FRAC_BAUD 1 // USART fractional BAUD implemented? -#define SERCOM3_USART_IRDA 1 // USART IrDA implemented? -#define SERCOM3_USART_ISO7816 1 // USART ISO7816 mode implemented? -#define SERCOM3_USART_LIN_MASTER 1 // USART LIN Master mode implemented? -#define SERCOM3_USART_RS485 1 // USART RS485 mode implemented? -#define SERCOM3_USART_SAMPA_EXT 1 // USART sample adjust implemented? -#define SERCOM3_USART_SAMPR_EXT 1 // USART oversampling adjustment implemented? - -#endif /* _SAMD51_SERCOM3_INSTANCE_ */ |