diff options
Diffstat (limited to 'locale/circuitpython.pot')
| -rw-r--r-- | locale/circuitpython.pot | 557 |
1 files changed, 513 insertions, 44 deletions
diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index a60d95aa2..177eee2bf 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-01-13 18:15-0500\n" +"POT-Creation-Date: 2020-03-30 17:03-0700\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -133,6 +133,10 @@ msgstr "" msgid "'%s' integer 0x%x does not fit in mask 0x%x" msgstr "" +#: py/runtime.c +msgid "'%s' object cannot assign attribute '%q'" +msgstr "" + #: py/proto.c msgid "'%s' object does not support '%q'" msgstr "" @@ -184,6 +188,10 @@ msgid "'align' requires 1 argument" msgstr "" #: py/compile.c +msgid "'async for' or 'async with' outside async function" +msgstr "" + +#: py/compile.c msgid "'await' outside function" msgstr "" @@ -271,6 +279,7 @@ msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c shared-bindings/pulseio/PWMOut.c #: shared-module/_pew/PewPew.c @@ -281,6 +290,12 @@ msgstr "" msgid "Already advertising." msgstr "" +#: ports/cxd56/common-hal/analogio/AnalogIn.c +msgid "AnalogIn not supported on given pin" +msgstr "" + +#: ports/cxd56/common-hal/analogio/AnalogOut.c +#: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "" @@ -294,6 +309,7 @@ msgid "AnalogOut not supported on given pin" msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c msgid "Another send is already active" msgstr "" @@ -378,6 +394,11 @@ msgstr "" msgid "Buffer too large and unable to allocate" msgstr "" +#: shared-bindings/_bleio/PacketBuffer.c +#, c-format +msgid "Buffer too short by %d bytes" +msgstr "" + #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c #, c-format @@ -405,6 +426,7 @@ msgid "Cannot delete values" msgstr "" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c +#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" @@ -434,6 +456,8 @@ msgid "Cannot remount '/' when USB is active." msgstr "" #: ports/atmel-samd/common-hal/microcontroller/__init__.c +#: ports/cxd56/common-hal/microcontroller/__init__.c +#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" @@ -441,6 +465,10 @@ msgstr "" msgid "Cannot set value when direction is input." msgstr "" +#: ports/mimxrt10xx/common-hal/busio/UART.c +msgid "Cannot specify RTS or CTS in RS485 mode" +msgstr "" + #: py/objslice.c msgid "Cannot subclass slice" msgstr "" @@ -453,6 +481,10 @@ msgstr "" msgid "Cannot unambiguously get sizeof scalar" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "" @@ -487,11 +519,8 @@ msgstr "" msgid "Column entry must be digitalio.DigitalInOut" msgstr "" -#: shared-bindings/displayio/I2CDisplay.c -msgid "Command must be 0-255" -msgstr "" - -#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/ParallelBus.c +#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c +#: shared-bindings/displayio/ParallelBus.c msgid "Command must be an int between 0 and 255" msgstr "" @@ -509,10 +538,38 @@ msgstr "" msgid "Corrupt raw code" msgstr "" -#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -535,6 +592,14 @@ msgstr "" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "" @@ -560,6 +625,10 @@ msgstr "" msgid "Device in use" msgstr "" +#: ports/cxd56/common-hal/digitalio/DigitalInOut.c +msgid "DigitalInOut not supported on given pin" +msgstr "" + #: shared-bindings/displayio/Display.c msgid "Display must have a 16 bit colorspace." msgstr "" @@ -576,6 +645,7 @@ msgstr "" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c +#: ports/cxd56/common-hal/pulseio/PulseIn.c msgid "EXTINT channel already in use" msgstr "" @@ -594,10 +664,6 @@ msgstr "" msgid "Expected a Characteristic" msgstr "" -#: shared-bindings/_pixelbuf/__init__.c -msgid "Expected a PixelBuf instance" -msgstr "" - #: shared-bindings/_bleio/Characteristic.c msgid "Expected a Service" msgstr "" @@ -616,21 +682,32 @@ msgstr "" msgid "Expected tuple of length %d, got %d" msgstr "" +#: ports/nrf/common-hal/_bleio/Adapter.c +msgid "Extended advertisements with scan response not supported." +msgstr "" + +#: extmod/ulab/code/fft.c +msgid "FFT is defined for ndarrays only" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "" -#: ports/nrf/sd.c ports/nrf/sd_mutex.c +#: ports/nrf/sd_mutex.c #, c-format msgid "Failed to acquire mutex, err 0x%04x" msgstr "" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "Failed to allocate RX buffer" msgstr "" +#: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c +#: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "" @@ -647,7 +724,7 @@ msgstr "" msgid "Failed to parse MP3 file" msgstr "" -#: ports/nrf/sd.c ports/nrf/sd_mutex.c +#: ports/nrf/sd_mutex.c #, c-format msgid "Failed to release mutex, err 0x%04x" msgstr "" @@ -664,6 +741,10 @@ msgstr "" msgid "Frequency captured is above capability. Capture Paused." msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -678,10 +759,22 @@ msgstr "" msgid "Group full" msgstr "" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "" @@ -708,20 +801,45 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c +msgid "Invalid I2C pin selection" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PWMOut.c +#: ports/cxd56/common-hal/pulseio/PWMOut.c #: ports/nrf/common-hal/pulseio/PWMOut.c shared-bindings/pulseio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +msgid "Invalid SPI pin selection" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +msgid "Invalid UART pin selection" +msgstr "" + #: py/moduerrno.c msgid "Invalid argument" msgstr "" @@ -730,7 +848,7 @@ msgstr "" msgid "Invalid bits per value" msgstr "" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "" @@ -758,6 +876,14 @@ msgstr "" msgid "Invalid format chunk size" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "Invalid memory access." +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid number of bits" msgstr "" @@ -784,10 +910,15 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/SPI.c #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c -#: ports/nrf/common-hal/busio/I2C.c +#: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c +#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c msgid "Invalid pins" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "" @@ -816,6 +947,10 @@ msgstr "" msgid "Invalid wave file" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "" @@ -861,10 +996,22 @@ msgstr "" msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + +#: py/parse.c +msgid "Name too long" +msgstr "" + #: shared-bindings/_pixelbuf/PixelBuf.c msgid "Negative step not supported" msgstr "" @@ -874,6 +1021,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "" @@ -882,11 +1030,23 @@ msgstr "" msgid "No DMA channel found" msgstr "" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -915,6 +1075,10 @@ msgstr "" msgid "No hardware support on pin" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -981,17 +1145,25 @@ msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" +#: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c +msgid "ParallelBus not yet supported" +msgstr "" + #: py/moduerrno.c msgid "Permission denied" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogIn.c +#: ports/cxd56/common-hal/analogio/AnalogIn.c +#: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" -#: shared-bindings/_pixelbuf/PixelBuf.c -msgid "Pixel beyond bounds of buffer" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" msgstr "" #: py/builtinhelp.c @@ -1014,6 +1186,23 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/UART.c +msgid "RS485 inversion specified when not in RS485 mode" +msgstr "" + +#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c #: ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1022,8 +1211,13 @@ msgstr "" msgid "RTC is not supported on this board" msgstr "" -#: shared-bindings/_pixelbuf/PixelBuf.c -msgid "Range out of bounds" +#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +msgid "RTS/CTS/RS485 Not yet supported on this device" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" msgstr "" #: shared-bindings/pulseio/PulseIn.c @@ -1062,6 +1256,14 @@ msgstr "" msgid "SDA or SCL needs a pull up" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1075,6 +1277,14 @@ msgstr "" msgid "Scan already in progess. Stop with stop_scan." msgstr "" +#: ports/mimxrt10xx/common-hal/busio/UART.c +msgid "Selected CTS pin not valid" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/UART.c +msgid "Selected RTS pin not valid" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Serializer in use" @@ -1101,6 +1311,14 @@ msgstr "" msgid "Stream missing readinto() or write() method." msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1174,6 +1392,26 @@ msgstr "" msgid "Tuple or struct_time argument required" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "" @@ -1255,7 +1493,7 @@ msgid "" "declined or ignored." msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -1289,6 +1527,10 @@ msgstr "" msgid "Viper functions don't currently support more than 4 arguments" msgstr "" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "" @@ -1349,10 +1591,18 @@ msgstr "" msgid "addresses is empty" msgstr "" +#: extmod/ulab/code/vectorise.c +msgid "arctan2 is implemented for scalars and ndarrays only" +msgstr "" + #: py/modbuiltins.c msgid "arg is an empty sequence" msgstr "" +#: extmod/ulab/code/numerical.c +msgid "argsort argument must be an ndarray" +msgstr "" + #: py/runtime.c msgid "argument has wrong type" msgstr "" @@ -1366,6 +1616,10 @@ msgstr "" msgid "argument should be a '%q' not a '%q'" msgstr "" +#: extmod/ulab/code/linalg.c +msgid "arguments must be ndarrays" +msgstr "" + #: py/objarray.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "" @@ -1374,6 +1628,18 @@ msgstr "" msgid "attributes not supported yet" msgstr "" +#: extmod/ulab/code/numerical.c +msgid "axis must be -1, 0, None, or 1" +msgstr "" + +#: extmod/ulab/code/numerical.c +msgid "axis must be -1, 0, or 1" +msgstr "" + +#: extmod/ulab/code/numerical.c +msgid "axis must be None, 0, or 1" +msgstr "" + #: py/builtinevex.c msgid "bad compile mode" msgstr "" @@ -1410,11 +1676,6 @@ msgstr "" msgid "branch not in range" msgstr "" -#: shared-bindings/_pixelbuf/PixelBuf.c -#, c-format -msgid "buf is too small. need %d bytes" -msgstr "" - #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "" @@ -1621,6 +1882,10 @@ msgstr "" msgid "cannot perform relative import" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "cannot reshape array (incompatible input/output shape)" +msgstr "" + #: py/emitnative.c msgid "casting" msgstr "" @@ -1642,7 +1907,7 @@ msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)" msgstr "" #: shared-bindings/displayio/Palette.c -msgid "color buffer must be a buffer or int" +msgid "color buffer must be a buffer, tuple, list, or int" msgstr "" #: shared-bindings/displayio/Palette.c @@ -1677,6 +1942,30 @@ msgstr "" msgid "conversion to object" msgstr "" +#: extmod/ulab/code/filter.c +msgid "convolve arguments must be linear arrays" +msgstr "" + +#: extmod/ulab/code/filter.c +msgid "convolve arguments must be ndarrays" +msgstr "" + +#: extmod/ulab/code/filter.c +msgid "convolve arguments must not be empty" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "could not broadast input array from shape" +msgstr "" + +#: extmod/ulab/code/poly.c +msgid "could not invert Vandermonde matrix" +msgstr "" + +#: extmod/ulab/code/numerical.c +msgid "ddof must be smaller than length of data set" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -1702,6 +1991,10 @@ msgstr "" msgid "dict update sequence has wrong length" msgstr "" +#: extmod/ulab/code/numerical.c +msgid "diff argument must be an ndarray" +msgstr "" + #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c #: shared-bindings/math/__init__.c msgid "division by zero" @@ -1772,6 +2065,26 @@ msgstr "" msgid "extra positional arguments given" msgstr "" +#: py/parse.c +msgid "f-string expression part cannot include a '#'" +msgstr "" + +#: py/parse.c +msgid "f-string expression part cannot include a backslash" +msgstr "" + +#: py/parse.c +msgid "f-string: empty expression not allowed" +msgstr "" + +#: py/parse.c +msgid "f-string: expecting '}'" +msgstr "" + +#: py/parse.c +msgid "f-string: single '}' is not allowed" +msgstr "" + #: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c #: shared-bindings/displayio/OnDiskBitmap.c msgid "file must be a file opened in byte mode" @@ -1781,6 +2094,14 @@ msgstr "" msgid "filesystem must provide mount method" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "first argument must be an iterable" +msgstr "" + +#: extmod/ulab/code/vectorise.c +msgid "first argument must be an ndarray" +msgstr "" + #: py/objtype.c msgid "first argument to super() must be type" msgstr "" @@ -1789,6 +2110,14 @@ msgstr "" msgid "firstbit must be MSB" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "flattening order must be either 'C', or 'F'" +msgstr "" + +#: extmod/ulab/code/numerical.c +msgid "flip argument must be an ndarray" +msgstr "" + #: py/objint.c msgid "float too big" msgstr "" @@ -1805,6 +2134,10 @@ msgstr "" msgid "full" msgstr "" +#: extmod/ulab/code/linalg.c +msgid "function defined for ndarrays only" +msgstr "" + #: py/argcheck.c msgid "function does not take keyword arguments" msgstr "" @@ -1818,6 +2151,10 @@ msgstr "" msgid "function got multiple values for argument '%q'" msgstr "" +#: extmod/ulab/code/linalg.c +msgid "function is defined for ndarrays only" +msgstr "" + #: py/argcheck.c #, c-format msgid "function missing %d required positional arguments" @@ -1881,8 +2218,14 @@ msgstr "" msgid "incorrect padding" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "index is out of bounds" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" @@ -1890,10 +2233,46 @@ msgstr "" msgid "indices must be integers" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "indices must be integers, slices, or Boolean lists" +msgstr "" + #: py/compile.c msgid "inline assembler must be a function" msgstr "" +#: extmod/ulab/code/create.c +msgid "input argument must be an integer or a 2-tuple" +msgstr "" + +#: extmod/ulab/code/fft.c +msgid "input array length must be power of 2" +msgstr "" + +#: extmod/ulab/code/poly.c +msgid "input data must be an iterable" +msgstr "" + +#: extmod/ulab/code/linalg.c +msgid "input matrix is asymmetric" +msgstr "" + +#: extmod/ulab/code/linalg.c +msgid "input matrix is singular" +msgstr "" + +#: extmod/ulab/code/linalg.c +msgid "input must be square matrix" +msgstr "" + +#: extmod/ulab/code/numerical.c +msgid "input must be tuple, list, range, or ndarray" +msgstr "" + +#: extmod/ulab/code/poly.c +msgid "input vectors must be of equal length" +msgstr "" + #: py/parsenum.c msgid "int() arg 2 must be >= 2 and <= 36" msgstr "" @@ -1972,6 +2351,14 @@ msgstr "" msgid "issubclass() arg 2 must be a class or a tuple of classes" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "iterables are not of the same length" +msgstr "" + +#: extmod/ulab/code/linalg.c +msgid "iterations did not converge" +msgstr "" + #: py/objstr.c msgid "join expects a list of str/bytes objects consistent with self object" msgstr "" @@ -2020,6 +2407,10 @@ msgstr "" msgid "long int not supported in this build" msgstr "" +#: py/parse.c +msgid "malformed f-string" +msgstr "" + #: shared-bindings/_stage/Layer.c msgid "map buffer too small" msgstr "" @@ -2028,6 +2419,14 @@ msgstr "" msgid "math domain error" msgstr "" +#: extmod/ulab/code/linalg.c +msgid "matrix dimensions do not match" +msgstr "" + +#: extmod/ulab/code/linalg.c +msgid "matrix is not positive definite" +msgstr "" + #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c #, c-format @@ -2051,6 +2450,10 @@ msgstr "" msgid "module not found" msgstr "" +#: extmod/ulab/code/poly.c +msgid "more degrees of freedom than data points" +msgstr "" + #: py/compile.c msgid "multiple *x in assignment" msgstr "" @@ -2075,6 +2478,10 @@ msgstr "" msgid "must use keyword argument for key function" msgstr "" +#: extmod/ulab/code/numerical.c +msgid "n must be between 0, and 9" +msgstr "" + #: py/runtime.c msgid "name '%q' is not defined" msgstr "" @@ -2161,6 +2568,14 @@ msgstr "" msgid "not enough arguments for format string" msgstr "" +#: extmod/ulab/code/poly.c +msgid "number of arguments must be 2, or 3" +msgstr "" + +#: extmod/ulab/code/create.c +msgid "number of points must be at least 2" +msgstr "" + #: py/obj.c #, c-format msgid "object '%s' is not a tuple or list" @@ -2219,6 +2634,14 @@ msgstr "" msgid "only bit_depth=16 is supported" msgstr "" +#: extmod/ulab/code/linalg.c +msgid "only ndarray objects can be inverted" +msgstr "" + +#: extmod/ulab/code/linalg.c +msgid "only ndarrays can be inverted" +msgstr "" + #: ports/nrf/common-hal/audiobusio/PDMIn.c msgid "only sample_rate=16000 is supported" msgstr "" @@ -2228,6 +2651,22 @@ msgstr "" msgid "only slices with step=1 (aka None) are supported" msgstr "" +#: extmod/ulab/code/linalg.c +msgid "only square matrices can be inverted" +msgstr "" + +#: extmod/ulab/code/ndarray.c extmod/ulab/code/vectorise.c +msgid "operands could not be broadcast together" +msgstr "" + +#: extmod/ulab/code/numerical.c +msgid "operation is not implemented on ndarrays" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "operation is not supported for given type" +msgstr "" + #: py/modbuiltins.c msgid "ord expects a character" msgstr "" @@ -2274,7 +2713,9 @@ msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter" msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c +#: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "" @@ -2302,8 +2743,12 @@ msgstr "" msgid "queue overflow" msgstr "" -#: shared-bindings/_pixelbuf/PixelBuf.c -msgid "rawbuf is not the same size as buf" +#: py/parse.c +msgid "raw f-strings are not implemented" +msgstr "" + +#: extmod/ulab/code/fft.c +msgid "real and imaginary parts must be of equal length" msgstr "" #: py/builtinimport.c @@ -2323,6 +2768,10 @@ msgstr "" msgid "return expected '%q' but got '%q'" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "right hand side must be an ndarray, or a scalar" +msgstr "" + #: py/objstr.c msgid "rsplit(None,n)" msgstr "" @@ -2345,6 +2794,10 @@ msgstr "" msgid "script compilation not supported" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "shape must be a 2-tuple" +msgstr "" + #: py/objstr.c msgid "sign not allowed in string format specifier" msgstr "" @@ -2357,6 +2810,10 @@ msgstr "" msgid "single '}' encountered in format string" msgstr "" +#: extmod/ulab/code/linalg.c +msgid "size is defined for ndarrays only" +msgstr "" + #: shared-bindings/time/__init__.c msgid "sleep length must be non-negative" msgstr "" @@ -2373,6 +2830,10 @@ msgstr "" msgid "soft reboot\n" msgstr "" +#: extmod/ulab/code/numerical.c +msgid "sort argument must be an ndarray" +msgstr "" + #: py/objstr.c msgid "start/end indices" msgstr "" @@ -2462,12 +2923,16 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "too many indices" +msgstr "" + #: py/runtime.c #, c-format msgid "too many values to unpack (expected %d)" msgstr "" -#: py/objstr.c +#: extmod/ulab/code/linalg.c py/objstr.c msgid "tuple index out of range" msgstr "" @@ -2479,7 +2944,9 @@ msgstr "" msgid "tuple/list required on RHS" msgstr "" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: shared-bindings/busio/UART.c msgid "tx and rx cannot both be None" msgstr "" @@ -2537,16 +3004,6 @@ msgstr "" msgid "unknown format code '%c' for object of type '%s'" msgstr "" -#: py/objstr.c -#, c-format -msgid "unknown format code '%c' for object of type 'float'" -msgstr "" - -#: py/objstr.c -#, c-format -msgid "unknown format code '%c' for object of type 'str'" -msgstr "" - #: py/compile.c msgid "unknown type" msgstr "" @@ -2607,6 +3064,14 @@ msgstr "" msgid "window must be <= interval" msgstr "" +#: extmod/ulab/code/linalg.c +msgid "wrong argument type" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "wrong input type" +msgstr "" + #: py/objstr.c msgid "wrong number of arguments" msgstr "" @@ -2615,6 +3080,10 @@ msgstr "" msgid "wrong number of values to unpack" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "wrong operand type on the right hand side" +msgstr "" + #: shared-module/displayio/Shape.c msgid "x value out of bounds" msgstr "" |