diff options
Diffstat (limited to 'stmhal/boards')
24 files changed, 654 insertions, 272 deletions
diff --git a/stmhal/boards/LIMIFROG/mpconfigboard.h b/stmhal/boards/LIMIFROG/mpconfigboard.h index 95fd6bf50..d04634ac3 100644 --- a/stmhal/boards/LIMIFROG/mpconfigboard.h +++ b/stmhal/boards/LIMIFROG/mpconfigboard.h @@ -37,13 +37,6 @@ void LIMIFROG_board_early_init(void); #define MICROPY_HW_I2C1_SDA (pin_B9) #define MICROPY_HW_I2C2_SCL (pin_B10) #define MICROPY_HW_I2C2_SDA (pin_B11) -// We use an array of baudrates and corresponding TIMINGR values. -// -// The value 0x90112626 was obtained from the DISCOVERY_I2C1_TIMING constant -// defined in the STM32L4Cube file Drivers/BSP/STM32L476G-Discovery/stm32l476g_discovery.h -#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x90112626}} -#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000 -#define MICROPY_HW_I2C_BAUDRATE_MAX 100000 // SPI busses #define MICROPY_HW_SPI1_NSS (pin_A4) diff --git a/stmhal/boards/NUCLEO_F446RE/mpconfigboard.h b/stmhal/boards/NUCLEO_F446RE/mpconfigboard.h new file mode 100644 index 000000000..d801fa188 --- /dev/null +++ b/stmhal/boards/NUCLEO_F446RE/mpconfigboard.h @@ -0,0 +1,64 @@ +#define MICROPY_HW_BOARD_NAME "NUCLEO-F446RE" +#define MICROPY_HW_MCU_NAME "STM32F446xx" + +#define MICROPY_HW_HAS_SWITCH (1) +#define MICROPY_HW_HAS_FLASH (1) +#define MICROPY_HW_ENABLE_RTC (1) + +// HSE is 8MHz, CPU freq set to 168MHz. Using PLLQ for USB this gives a nice +// 48 MHz clock for USB. To goto 180 MHz, I think that USB would need to be +// configured to use PLLSAI +#define MICROPY_HW_CLK_PLLM (8) +#define MICROPY_HW_CLK_PLLN (336) +#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2) +#define MICROPY_HW_CLK_PLLQ (7) + +// UART config +#define MICROPY_HW_UART2_TX (pin_A2) +#define MICROPY_HW_UART2_RX (pin_A3) +#define MICROPY_HW_UART6_TX (pin_C6) +#define MICROPY_HW_UART6_RX (pin_C7) +// UART 2 connects to the STM32F103 (STLINK) on the Nucleo board +// and this is exposed as a USB Serial port. +#define MICROPY_HW_UART_REPL PYB_UART_2 +#define MICROPY_HW_UART_REPL_BAUD 115200 + +// I2C busses +#define MICROPY_HW_I2C1_SCL (pin_B6) // Arduino D10, pin 17 on CN10 +#define MICROPY_HW_I2C1_SDA (pin_B7) // pin 21 on CN7 +#define MICROPY_HW_I2C2_SCL (pin_B10) // Arduino D6, pin 25 on CN10 +#define MICROPY_HW_I2C2_SDA (pin_B3) // Arduino D3, pin 31 on CN10 +#define MICROPY_HW_I2C3_SCL (pin_A8) // Arduino D7, pin 23 on CN10 +#define MICROPY_HW_I2C3_SDA (pin_C9) // pin 1 on CN10 + +// SPI busses +#define MICROPY_HW_SPI1_NSS (pin_A15) // pin 17 on CN7 +#define MICROPY_HW_SPI1_SCK (pin_A5) // Arduino D13, pin 11 on CN10 +#define MICROPY_HW_SPI1_MISO (pin_A6) // Arduino D12, pin 13 on CN10 +#define MICROPY_HW_SPI1_MOSI (pin_A7) // Arduino D11, pin 15 on CN10 + +#define MICROPY_HW_SPI2_NSS (pin_B12) // pin 16 on CN10 +#define MICROPY_HW_SPI2_SCK (pin_B13) // pin 30 on CN10 +#define MICROPY_HW_SPI2_MISO (pin_B14) // pin 28 on CN10 +#define MICROPY_HW_SPI2_MOSI (pin_B15) // pin 26 on CN10 + +#define MICROPY_HW_SPI3_NSS (pin_A4) // Arduino A2, pin 32 on CN7 +#define MICROPY_HW_SPI3_SCK (pin_B3) // Arduino D3, pin 31 on CN10 +#define MICROPY_HW_SPI3_MISO (pin_B4) // Arduino D5, pin 27 on CN10 +#define MICROPY_HW_SPI3_MOSI (pin_B5) // Arduino D4, pin 29 on CN10 + +#define MICROPY_HW_SPI4_NSS (pin_B12) // pin 16 on CN10 +#define MICROPY_HW_SPI4_SCK (pin_B13) // pin 30 on CN10 +#define MICROPY_HW_SPI4_MISO (pin_A1) // pin 30 on CN7 +#define MICROPY_HW_SPI4_MOSI (pin_A11) // pin 14 on CN10 + +// USRSW is pulled low. Pressing the button makes the input go high. +#define MICROPY_HW_USRSW_PIN (pin_C13) +#define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) +#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_FALLING) +#define MICROPY_HW_USRSW_PRESSED (0) + +// LEDs +#define MICROPY_HW_LED1 (pin_A5) // Green LD2 LED on Nucleo +#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin)) +#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) diff --git a/stmhal/boards/NUCLEO_F446RE/mpconfigboard.mk b/stmhal/boards/NUCLEO_F446RE/mpconfigboard.mk new file mode 100644 index 000000000..e1ec6d57c --- /dev/null +++ b/stmhal/boards/NUCLEO_F446RE/mpconfigboard.mk @@ -0,0 +1,4 @@ +MCU_SERIES = f4 +CMSIS_MCU = STM32F446xx +AF_FILE = boards/stm32f429_af.csv +LD_FILE = boards/stm32f411.ld diff --git a/stmhal/boards/NUCLEO_F446RE/pins.csv b/stmhal/boards/NUCLEO_F446RE/pins.csv new file mode 100644 index 000000000..5b09bcc74 --- /dev/null +++ b/stmhal/boards/NUCLEO_F446RE/pins.csv @@ -0,0 +1,72 @@ +D0,PA3 +D1,PA2 +D2,PA10 +D3,PB3 +D4,PB5 +D5,PB4 +D6,PB10 +D7,PA8 +D8,PA9 +D9,PC7 +D10,PB6 +D11,PA7 +D12,PA6 +D13,PA5 +D14,PB9 +D15,PB8 +A0,PA0 +A1,PA1 +A2,PA4 +A3,PB0 +A4,PC1 +A5,PC0 +PA0,PA0 +PA1,PA1 +PA2,PA2 +PA3,PA3 +PA4,PA4 +PA5,PA5 +PA6,PA6 +PA7,PA7 +PA8,PA8 +PA9,PA9 +PA10,PA10 +PA11,PA11 +PA12,PA12 +PA15,PA15 +PB0,PB0 +PB1,PB1 +PB2,PB2 +PB3,PB3 +PB4,PB4 +PB5,PB5 +PB6,PB6 +PB7,PB7 +PB8,PB8 +PB9,PB9 +PB10,PB10 +PB12,PB12 +PB13,PB13 +PB14,PB14 +PB15,PB15 +PC0,PC0 +PC1,PC1 +PC2,PC2 +PC3,PC3 +PC4,PC4 +PC5,PC5 +PC6,PC6 +PC7,PC7 +PC8,PC8 +PC9,PC9 +PC10,PC10 +PC11,PC11 +PC12,PC12 +PC13,PC13 +PC14,PC14 +PC15,PC15 +PD2,PD2 +PH0,PH0 +PH1,PH1 +LED,PA5 +SW,PC13 diff --git a/stmhal/boards/NUCLEO_F446RE/stm32f4xx_hal_conf.h b/stmhal/boards/NUCLEO_F446RE/stm32f4xx_hal_conf.h new file mode 100644 index 000000000..3d0ce926b --- /dev/null +++ b/stmhal/boards/NUCLEO_F446RE/stm32f4xx_hal_conf.h @@ -0,0 +1,413 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf.h + * @author MCD Application Team + * @version V1.1.0 + * @date 19-June-2014 + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +// This board doesn't really have USB, but the stmhal codebase doesn't build +// without some USB defined, so we leave this on for now. +#define USE_USB_FS + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CAN_MODULE_ENABLED +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +#define HAL_DAC_MODULE_ENABLED +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +#define HAL_RTC_MODULE_ENABLED +/* #define HAL_SAI_MODULE_ENABLED */ +#define HAL_SD_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)40000) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x00) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 1 +#define INSTRUCTION_CACHE_ENABLE 1 +#define DATA_CACHE_ENABLE 1 + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2 +#define MAC_ADDR1 0 +#define MAC_ADDR2 0 +#define MAC_ADDR3 0 +#define MAC_ADDR4 0 +#define MAC_ADDR5 0 + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stmhal/boards/NUCLEO_F767ZI/mpconfigboard.h b/stmhal/boards/NUCLEO_F767ZI/mpconfigboard.h index 647525384..8952bce82 100644 --- a/stmhal/boards/NUCLEO_F767ZI/mpconfigboard.h +++ b/stmhal/boards/NUCLEO_F767ZI/mpconfigboard.h @@ -16,7 +16,7 @@ #define MICROPY_HW_ENABLE_RTC (1) #define MICROPY_HW_ENABLE_TIMER (1) #define MICROPY_HW_ENABLE_SERVO (0) -#define MICROPY_HW_ENABLE_DAC (0) +#define MICROPY_HW_ENABLE_DAC (1) #define MICROPY_HW_ENABLE_CAN (1) // HSE is 25MHz @@ -52,11 +52,6 @@ #define MICROPY_HW_I2C3_SCL (pin_H7) #define MICROPY_HW_I2C3_SDA (pin_H8) -// TODO These should go in i2c.c -#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x40912732}} -#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000 -#define MICROPY_HW_I2C_BAUDRATE_MAX 100000 - // SPI #define MICROPY_HW_SPI3_NSS (pin_A4) #define MICROPY_HW_SPI3_SCK (pin_B3) diff --git a/stmhal/boards/NUCLEO_F767ZI/pins.csv b/stmhal/boards/NUCLEO_F767ZI/pins.csv index f9f743489..897b1473e 100644 --- a/stmhal/boards/NUCLEO_F767ZI/pins.csv +++ b/stmhal/boards/NUCLEO_F767ZI/pins.csv @@ -1,25 +1,35 @@ -A0,PA0 -A1,PF10 -A2,PF9 -A3,PF8 -A4,PF7 -A5,PF6 -D0,PC7 -D1,PC6 -D2,PG6 -D3,PB4 -D4,PG7 -D5,PA8 -D6,PH6 -D7,PI3 -D8,PI2 -D9,PA15 -D10,PI0 -D11,PB15 -D12,PB14 -D13,PI1 +A0,PA3 +A1,PC0 +A2,PC3 +A3,PF3 +A4,PF5 +A5,PF10 +D0,PG9 +D1,PG14 +D2,PF15 +D3,PE13 +D4,PF14 +D5,PE11 +D6,PE9 +D7,PF13 +D8,PF12 +D9,PD15 +D10,PD14 +D11,PA7 +D12,PA6 +D13,PA5 D14,PB9 D15,PB8 +D16,PC6 +D17,PB15 +D18,PB13 +D19,PB12 +D20,PA15 +D21,PC7 +D22,PB5 +D23,PB3 +D24,PA4 +D25,PB4 LED1,PB0 LED2,PB7 LED3,PB14 diff --git a/stmhal/boards/NUCLEO_F767ZI/stm32f7xx_hal_conf.h b/stmhal/boards/NUCLEO_F767ZI/stm32f7xx_hal_conf.h index d2c31cb09..e1aa4578d 100644 --- a/stmhal/boards/NUCLEO_F767ZI/stm32f7xx_hal_conf.h +++ b/stmhal/boards/NUCLEO_F767ZI/stm32f7xx_hal_conf.h @@ -58,7 +58,7 @@ /* #define HAL_CEC_MODULE_ENABLED */ /* #define HAL_CRC_MODULE_ENABLED */ /* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ +#define HAL_DAC_MODULE_ENABLED /* #define HAL_DCMI_MODULE_ENABLED */ #define HAL_DMA_MODULE_ENABLED /* #define HAL_DMA2D_MODULE_ENABLED */ diff --git a/stmhal/boards/NUCLEO_L476RG/mpconfigboard.h b/stmhal/boards/NUCLEO_L476RG/mpconfigboard.h index 181580b14..f2474619f 100644 --- a/stmhal/boards/NUCLEO_L476RG/mpconfigboard.h +++ b/stmhal/boards/NUCLEO_L476RG/mpconfigboard.h @@ -21,10 +21,6 @@ #define MICROPY_HW_UART_REPL PYB_UART_2 #define MICROPY_HW_UART_REPL_BAUD 115200 -#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x90112626}} -#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000 -#define MICROPY_HW_I2C_BAUDRATE_MAX 100000 - #define MICROPY_HW_FLASH_LATENCY FLASH_LATENCY_4 // I2C busses diff --git a/stmhal/boards/STM32F411DISC/mpconfigboard.h b/stmhal/boards/STM32F411DISC/mpconfigboard.h index d87701f8a..1488cd764 100644 --- a/stmhal/boards/STM32F411DISC/mpconfigboard.h +++ b/stmhal/boards/STM32F411DISC/mpconfigboard.h @@ -35,7 +35,7 @@ // I2C busses #define MICROPY_HW_I2C1_SCL (pin_B6) -#define MICROPY_HW_I2C1_SDA (pin_B7) +#define MICROPY_HW_I2C1_SDA (pin_B9) //#define MICROPY_HW_I2C2_SCL (pin_B10) //#define MICROPY_HW_I2C2_SDA (pin_B11) #define MICROPY_HW_I2C3_SCL (pin_A8) diff --git a/stmhal/boards/STM32F769DISC/mpconfigboard.h b/stmhal/boards/STM32F769DISC/mpconfigboard.h index a4cbcc520..50b9c1618 100644 --- a/stmhal/boards/STM32F769DISC/mpconfigboard.h +++ b/stmhal/boards/STM32F769DISC/mpconfigboard.h @@ -1,4 +1,5 @@ -//This board is only confirmed to operate using openocd. +// This board is confirmed to operate using stlink and openocd. +// REPL is on UART(1) and is available through the stlink USB-UART device. // To use openocd run "OPENOCD_CONFIG=boards/openocd_stm32f7.cfg" in // the make command. #define MICROPY_HW_BOARD_NAME "F769DISC" @@ -42,11 +43,6 @@ #define MICROPY_HW_I2C3_SCL (pin_H7) #define MICROPY_HW_I2C3_SDA (pin_H8) -// TODO These should go in i2c.c -#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x40912732}} -#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000 -#define MICROPY_HW_I2C_BAUDRATE_MAX 100000 - // SPI #define MICROPY_HW_SPI2_NSS (pin_A11) #define MICROPY_HW_SPI2_SCK (pin_A12) @@ -54,7 +50,7 @@ #define MICROPY_HW_SPI2_MOSI (pin_B15) // USRSW is pulled low. Pressing the button makes the input go high. -#define MICROPY_HW_USRSW_PIN (pin_I11) +#define MICROPY_HW_USRSW_PIN (pin_A0) #define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) #define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_RISING) #define MICROPY_HW_USRSW_PRESSED (1) @@ -67,6 +63,12 @@ #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) // SD card detect switch +#define MICROPY_HW_SDMMC2_CK (pin_D6) +#define MICROPY_HW_SDMMC2_CMD (pin_D7) +#define MICROPY_HW_SDMMC2_D0 (pin_G9) +#define MICROPY_HW_SDMMC2_D1 (pin_G10) +#define MICROPY_HW_SDMMC2_D2 (pin_B3) +#define MICROPY_HW_SDMMC2_D3 (pin_B4) #define MICROPY_HW_SDCARD_DETECT_PIN (pin_I15) #define MICROPY_HW_SDCARD_DETECT_PULL (GPIO_PULLUP) #define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET) diff --git a/stmhal/boards/STM32F769DISC/mpconfigboard.mk b/stmhal/boards/STM32F769DISC/mpconfigboard.mk index 2e1e9952b..b65a18afb 100644 --- a/stmhal/boards/STM32F769DISC/mpconfigboard.mk +++ b/stmhal/boards/STM32F769DISC/mpconfigboard.mk @@ -1,4 +1,4 @@ MCU_SERIES = f7 CMSIS_MCU = STM32F769xx -AF_FILE = boards/stm32f769_af.csv +AF_FILE = boards/stm32f767_af.csv LD_FILE = boards/stm32f769.ld diff --git a/stmhal/boards/STM32F769DISC/pins.csv b/stmhal/boards/STM32F769DISC/pins.csv index e59a51387..dcc2df208 100644 --- a/stmhal/boards/STM32F769DISC/pins.csv +++ b/stmhal/boards/STM32F769DISC/pins.csv @@ -33,12 +33,12 @@ AUDIO_SCL,PH7 EXT_SDA,PB9 EXT_SCL,PB8 EXT_RST,PG3 -SD_D0,PC8 -SD_D1,PC9 -SD_D2,PC10 -SD_D3,PC11 -SD_CK,PC12 -SD_CMD,PD2 +SD_D0,PG9 +SD_D1,PG10 +SD_D2,PB3 +SD_D3,PB4 +SD_CK,PD6 +SD_CMD,PD7 SD_SW,PI15 LCD_BL_CTRL,PK3 LCD_INT,PI13 diff --git a/stmhal/boards/STM32F7DISC/mpconfigboard.h b/stmhal/boards/STM32F7DISC/mpconfigboard.h index 38665055f..44a39c0a1 100644 --- a/stmhal/boards/STM32F7DISC/mpconfigboard.h +++ b/stmhal/boards/STM32F7DISC/mpconfigboard.h @@ -51,16 +51,6 @@ void STM32F7DISC_board_early_init(void); #define MICROPY_HW_I2C3_SCL (pin_H7) #define MICROPY_HW_I2C3_SDA (pin_H8) -// The STM32F7 uses a TIMINGR register which is configured using an Excel -// Spreadsheet from AN4235: http://www.st.com/web/en/catalog/tools/PF258335 -// We use an array of baudrates and corresponding TIMINGR values. -// -// The value 0x40912732 was obtained from the DISCOVERY_I2Cx_TIMING constant -// defined in the STM32F7Cube file Drivers/BSP/STM32F746G-Discovery/stm32f7456g_discovery.h -#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x40912732}} -#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000 -#define MICROPY_HW_I2C_BAUDRATE_MAX 100000 - // SPI #define MICROPY_HW_SPI2_NSS (pin_I0) #define MICROPY_HW_SPI2_SCK (pin_I1) diff --git a/stmhal/boards/STM32L476DISC/board_init.c b/stmhal/boards/STM32L476DISC/board_init.c new file mode 100644 index 000000000..fdc41c401 --- /dev/null +++ b/stmhal/boards/STM32L476DISC/board_init.c @@ -0,0 +1,10 @@ +#include "py/mphal.h" +#include "genhdr/pins.h" + +void STM32L476DISC_board_early_init(void) { + // set SPI flash WP and HOLD pins high + mp_hal_pin_output(&pin_E14); + mp_hal_pin_output(&pin_E15); + mp_hal_pin_write(&pin_E14, 1); + mp_hal_pin_write(&pin_E15, 1); +} diff --git a/stmhal/boards/STM32L476DISC/mpconfigboard.h b/stmhal/boards/STM32L476DISC/mpconfigboard.h index 2be5c9de6..258a86b60 100644 --- a/stmhal/boards/STM32L476DISC/mpconfigboard.h +++ b/stmhal/boards/STM32L476DISC/mpconfigboard.h @@ -1,5 +1,8 @@ #include STM32_HAL_H +#define MICROPY_BOARD_EARLY_INIT STM32L476DISC_board_early_init +void STM32L476DISC_board_early_init(void); + #define MICROPY_HW_BOARD_NAME "L476-DISCO" #define MICROPY_HW_MCU_NAME "STM32L476" @@ -16,6 +19,13 @@ #define MICROPY_HW_ENABLE_DAC (0) #define MICROPY_HW_ENABLE_CAN (0) +// use external SPI flash for storage +#define MICROPY_HW_SPIFLASH_SIZE_BITS (128 * 1024 * 1024) +#define MICROPY_HW_SPIFLASH_CS (pin_E11) +#define MICROPY_HW_SPIFLASH_SCK (pin_E10) +#define MICROPY_HW_SPIFLASH_MOSI (pin_E12) +#define MICROPY_HW_SPIFLASH_MISO (pin_E13) + // MSI is used and is 4MHz #define MICROPY_HW_CLK_PLLM (1) #define MICROPY_HW_CLK_PLLN (40) @@ -37,13 +47,6 @@ #define MICROPY_HW_I2C1_SDA (pin_B7) #define MICROPY_HW_I2C2_SCL (pin_B10) #define MICROPY_HW_I2C2_SDA (pin_B11) -// We use an array of baudrates and corresponding TIMINGR values. -// -// The value 0x90112626 was obtained from the DISCOVERY_I2C1_TIMING constant -// defined in the STM32L4Cube file Drivers/BSP/STM32L476G-Discovery/stm32l476g_discovery.h -#define MICROPY_HW_I2C_BAUDRATE_TIMING {{100000, 0x90112626}} -#define MICROPY_HW_I2C_BAUDRATE_DEFAULT 100000 -#define MICROPY_HW_I2C_BAUDRATE_MAX 100000 // SPI busses #define MICROPY_HW_SPI2_NSS (pin_D0) diff --git a/stmhal/boards/make-pins.py b/stmhal/boards/make-pins.py index b33c92edc..51619ffa2 100755 --- a/stmhal/boards/make-pins.py +++ b/stmhal/boards/make-pins.py @@ -14,7 +14,8 @@ SUPPORTED_FN = { 'I2S' : ['CK', 'MCK', 'SD', 'WS', 'EXTSD'], 'USART' : ['RX', 'TX', 'CTS', 'RTS', 'CK'], 'UART' : ['RX', 'TX', 'CTS', 'RTS'], - 'SPI' : ['NSS', 'SCK', 'MISO', 'MOSI'] + 'SPI' : ['NSS', 'SCK', 'MISO', 'MOSI'], + 'SDMMC' : ['CK', 'CMD', 'D0', 'D1', 'D2', 'D3'], } CONDITIONAL_VAR = { @@ -23,6 +24,7 @@ CONDITIONAL_VAR = { 'SPI' : 'MICROPY_HW_SPI{num}_SCK', 'UART' : 'MICROPY_HW_UART{num}_TX', 'USART' : 'MICROPY_HW_UART{num}_TX', + 'SDMMC' : 'MICROPY_HW_SDMMC{num}_CK', } def parse_port_pin(name_str): @@ -281,11 +283,11 @@ class Pins(object): self.board_pins.append(NamedPin(row[0], pin)) def print_named(self, label, named_pins): - print('STATIC const mp_map_elem_t pin_{:s}_pins_locals_dict_table[] = {{'.format(label)) + print('STATIC const mp_rom_map_elem_t pin_{:s}_pins_locals_dict_table[] = {{'.format(label)) for named_pin in named_pins: pin = named_pin.pin() if pin.is_board_pin(): - print(' {{ MP_OBJ_NEW_QSTR(MP_QSTR_{:s}), (mp_obj_t)&pin_{:s} }},'.format(named_pin.name(), pin.cpu_pin_name())) + print(' {{ MP_ROM_QSTR(MP_QSTR_{:s}), MP_ROM_PTR(&pin_{:s}) }},'.format(named_pin.name(), pin.cpu_pin_name())) print('};') print('MP_DEFINE_CONST_DICT(pin_{:s}_pins_locals_dict, pin_{:s}_pins_locals_dict_table);'.format(label, label)); diff --git a/stmhal/boards/openocd_stm32f4.cfg b/stmhal/boards/openocd_stm32f4.cfg index 122ae42b1..ee96b91bd 100644 --- a/stmhal/boards/openocd_stm32f4.cfg +++ b/stmhal/boards/openocd_stm32f4.cfg @@ -4,7 +4,7 @@ # To flash your firmware: # # $ openocd -f openocd_stm32f4.cfg \ -# -c "stm_flash build-BOARD/firmware0.bin build-BOARD/firmware1.bin" +# -c "stm_flash build-BOARD/firmware0.bin 0x08000000 build-BOARD/firmware1.bin 0x08020000" # # For a gdb server on port 3333: # diff --git a/stmhal/boards/openocd_stm32f7.cfg b/stmhal/boards/openocd_stm32f7.cfg index 18aa58c96..55b632650 100644 --- a/stmhal/boards/openocd_stm32f7.cfg +++ b/stmhal/boards/openocd_stm32f7.cfg @@ -4,7 +4,7 @@ # To flash your firmware: # # $ openocd -f openocd_stm32f7.cfg \ -# -c "stm_flash build-BOARD/firmware0.bin build-BOARD/firmware1.bin" +# -c "stm_flash build-BOARD/firmware0.bin 0x08000000 build-BOARD/firmware1.bin 0x08020000" # # For a gdb server on port 3333: # diff --git a/stmhal/boards/openocd_stm32l4.cfg b/stmhal/boards/openocd_stm32l4.cfg index 3c9b99981..59e98de03 100644 --- a/stmhal/boards/openocd_stm32l4.cfg +++ b/stmhal/boards/openocd_stm32l4.cfg @@ -4,7 +4,7 @@ # To flash your firmware: # # $ openocd -f openocd_stm32l4.cfg \ -# -c "stm_flash build-BOARD/firmware0.bin build-BOARD/firmware1.bin" +# -c "stm_flash build-BOARD/firmware0.bin 0x08000000 build-BOARD/firmware1.bin 0x08004000" # # For a gdb server on port 3333: # diff --git a/stmhal/boards/stm32f411.ld b/stmhal/boards/stm32f411.ld index 823b5f56a..0b7bcb553 100644 --- a/stmhal/boards/stm32f411.ld +++ b/stmhal/boards/stm32f411.ld @@ -16,10 +16,10 @@ MEMORY _minimum_stack_size = 2K; _minimum_heap_size = 16K; -/* top end of the stack */ - -/*_stack_end = ORIGIN(RAM) + LENGTH(RAM);*/ -_estack = ORIGIN(RAM) + LENGTH(RAM) - 1; +/* Define tho top end of the stack. The stack is full descending so begins just + above last byte of RAM. Note that EABI requires the stack to be 8-byte + aligned for a call. */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* define common sections and symbols */ INCLUDE common.ld diff --git a/stmhal/boards/stm32f429.ld b/stmhal/boards/stm32f429.ld index d199f4550..0feb5bd62 100644 --- a/stmhal/boards/stm32f429.ld +++ b/stmhal/boards/stm32f429.ld @@ -16,10 +16,10 @@ MEMORY _minimum_stack_size = 2K; _minimum_heap_size = 16K; -/* top end of the stack */ - -/*_stack_end = ORIGIN(RAM) + LENGTH(RAM);*/ -_estack = ORIGIN(RAM) + LENGTH(RAM) - 1; +/* Define tho top end of the stack. The stack is full descending so begins just + above last byte of RAM. Note that EABI requires the stack to be 8-byte + aligned for a call. */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* define common sections and symbols */ INCLUDE common.ld diff --git a/stmhal/boards/stm32f767_af.csv b/stmhal/boards/stm32f767_af.csv index eabc9ab3b..db27818c6 100644 --- a/stmhal/boards/stm32f767_af.csv +++ b/stmhal/boards/stm32f767_af.csv @@ -1,11 +1,11 @@ Port,,AF0,AF1,AF2,AF3,AF4,AF5,AF6,AF7,AF8,AF9,AF10,AF11,AF12,AF13,AF14,AF15 -,,SYS,TIM1/2,TIM3/4/5,TIM8/9/10/11/LPTIM1/CEC,I2C1/2/3/4/CEC,SPI1/2/3/4/5/6,SPI3/SAI1,SPI2/3/USART1/2/3/UART5/SPDIFRX,SAI2/USART6/UART4/5/7/8/SPDIFRX,CAN1/2/TIM12/13/14/QUADSPI/LCD,SAI2/QUADSPI/OTG2_HS/OTG1_FS,ETH/OTG1_FS,FMC/SDMMC1/OTG2_FS,DCMI,LCD,SYS +,,SYS,TIM1/2,TIM3/4/5,TIM8/9/10/11/LPTIM1/CEC,I2C1/2/3/4/CEC,SPI1/2/3/4/5/6,SPI3/SAI1,SPI2/3/USART1/2/3/UART5/SPDIFRX,SAI2/USART6/UART4/5/7/8/SPDIFRX,CAN1/2/TIM12/13/14/QUADSPI/LCD,SAI2/QUADSPI/SDMMC2/OTG2_HS/OTG1_FS,SDMMC2/ETH,FMC/SDMMC1/OTG2_FS,DCMI,LCD,SYS PortA,PA0,,TIM2_CH1/TIM2_ETR,TIM5_CH1,TIM8_ETR,,,,USART2_CTS,UART4_TX,,SAI2_SD_B,ETH_MII_CRS,,,,EVENTOUT PortA,PA1,,TIM2_CH2,TIM5_CH2,,,,,USART2_RTS,UART4_RX,QUADSPI_BK1_IO3,SAI2_MCK_B,ETH_MII_RX_CLK/ETH_RMII_REF_CLK,,,LCD_R2,EVENTOUT PortA,PA2,,TIM2_CH3,TIM5_CH3,TIM9_CH1,,,,USART2_TX,SAI2_SCK_B,,,ETH_MDIO,,,LCD_R1,EVENTOUT PortA,PA3,,TIM2_CH4,TIM5_CH4,TIM9_CH2,,,,USART2_RX,,,OTG_HS_ULPI_D0,ETH_MII_COL,,,LCD_B5,EVENTOUT PortA,PA4,,,,,,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,USART2_CK,,,,,OTG_HS_SOF,DCMI_HSYNC,LCD_VSYNC,EVENTOUT -PortA,PA5,,TIM2_CH1/TIM2_ETR,TIM8_CH1N,SPI1_SCK/I2S1_CK,,,,,,,OTG_HS_ULPI_CK,,,,LCD_R4,EVENTOUT +PortA,PA5,,TIM2_CH1/TIM2_ETR,,TIM8_CH1N,,SPI1_SCK/I2S1_CK,,,,,OTG_HS_ULPI_CK,,,,LCD_R4,EVENTOUT PortA,PA6,,TIM1_BKIN,TIM3_CH1,TIM8_BKIN,,SPI1_MISO,,,,TIM13_CH1,,,,DCMI_PIXCLK,LCD_G2,EVENTOUT PortA,PA7,,TIM1_CH1N,TIM3_CH2,TIM8_CH1N,,SPI1_MOSI/I2S1_SD,,,,TIM14_CH1,,ETH_MII_RX_DV/ETH_RMII_CRS_DV,FMC_SDNWE,,,EVENTOUT PortA,PA8,MCO1,TIM1_CH1,,TIM8_BKIN2,I2C3_SCL,,,USART1_CK,,,OTG_FS_SOF,,,,LCD_R6,EVENTOUT @@ -19,27 +19,27 @@ PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,HDMICE,CSPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,,U PortB,PB0,,TIM1_CH2N,TIM3_CH3T,IM8_CH2N,,,,,UART4_CTS,LCD_R3,OTG_HS_ULPI_D1,ETH_MII_RXD2,,,,EVENTOUT PortB,PB1,,TIM1_CH3N,TIM3_CH4T,IM8_CH3N,,,,,,LCD_R6,OTG_HS_ULPI_D2,ETH_MII_RXD3,,,,EVENTOUT PortB,PB2,,,,,,,SAI1_SD_A,SPI3_MOSI/I2S3_SD,,QUADSPI_CLK,,,,,,EVENTOUT -PortB,PB3,JTDO/TRACESWO,TIM2_CH2,,,,SPI1_SCK/I2S1_CK,SPI3_SCK/I2S3_CK,,,,,,,,,EVENTOUT -PortB,PB4,NJTRST,,TIM3_CH1,,,SPI1_MISO,SPI3_MISO,SPI2_NSS/I2S2_WS,,,,,,,,EVENTOUT +PortB,PB3,JTDO/TRACESWO,TIM2_CH2,,,,SPI1_SCK/I2S1_CK,SPI3_SCK/I2S3_CK,,,,SDMMC2_D2,,,,,EVENTOUT +PortB,PB4,NJTRST,,TIM3_CH1,,,SPI1_MISO,SPI3_MISO,SPI2_NSS/I2S2_WS,,,SDMMC2_D3,,,,,EVENTOUT PortB,PB5,,,TIM3_CH2,,I2C1_SMBA,SPI1_MOSI/I2S1_SD,SPI3_MOSI/I2S3_SD,,,CAN2_RX,OTG_HS_ULPI_D7,ETH_PPS_OUT,FMC_SDCKE1,DCMI_D10,,EVENTOUT PortB,PB6,,,TIM4_CH1,HDMICEC,I2C1_SCL,,,USART1_TX,,CAN2_TX,QUADSPI_BK1_NCS,,FMC_SDNE1,DCMI_D5,,EVENTOUT PortB,PB7,,,TIM4_CH2,,I2C1_SDA,,,USART1_RX,,,,,FMC_NL,DCMI_VSYNC,,EVENTOUT -PortB,PB8,,,TIM4_CH3,TIM10_CH1,I2C1_SCL,,,,,CAN1_RX,,ETH_MII_TXD3,SDMMC1_D4,DCMI_D6,LCD_B6,EVENTOUT -PortB,PB9,,,TIM4_CH4,TIM11_CH1,I2C1_SDA,SPI2_NSS/I2S2_WS,,,,CAN1_TX,,,SDMMC1_D5,DCMI_D7,LCD_B7,EVENTOUT +PortB,PB8,,,TIM4_CH3,TIM10_CH1,I2C1_SCL,,,,,CAN1_RX,SDMMC2_D4,ETH_MII_TXD3,SDMMC1_D4,DCMI_D6,LCD_B6,EVENTOUT +PortB,PB9,,,TIM4_CH4,TIM11_CH1,I2C1_SDA,SPI2_NSS/I2S2_WS,,,,CAN1_TX,SDMMC2_D5,,SDMMC1_D5,DCMI_D7,LCD_B7,EVENTOUT PortB,PB10,,TIM2_CH3,,,I2C2_SCL,SPI2_SCK/I2S2_CK,,USART3_TX,,,OTG_HS_ULPI_D3,ETH_MII_RX_ER,,,LCD_G4,EVENTOUT PortB,PB11,,TIM2_CH4,,,I2C2_SDA,,,USART3_RX,,,OTG_HS_ULPI_D4,ETH_MII_TX_EN/ETH_RMII_TX_EN,,,LCD_G5,EVENTOUT PortB,PB12,,TIM1_BKIN,,,I2C2_SMBA,SPI2_NSS/I2S2_WS,,USART3_CK,,CAN2_RX,OTG_HS_ULPI_D5,ETH_MII_TXD0/ETH_RMII_TXD0,OTG_HS_ID,,,EVENTOUT PortB,PB13,,TIM1_CH1N,,,,SPI2_SCK/I2S2_CK,,USART3_CTS,,CAN2_TX,OTG_HS_ULPI_D6,ETH_MII_TXD1/ETH_RMII_TXD1,,,,EVENTOUT -PortB,PB14,,TIM1_CH2N,,TIM8_CH2N,,SPI2_MISO,,USART3_RTS,,TIM12_CH1,,,OTG_HS_DM,,,EVENTOUT -PortB,PB15,RTC_REFIN,TIM1_CH3N,,TIM8_CH3N,,SPI2_MOSI/I2S2_SD,,,,TIM12_CH2,,,OTG_HS_DP,,,EVENTOUT +PortB,PB14,,TIM1_CH2N,,TIM8_CH2N,,SPI2_MISO,,USART3_RTS,,TIM12_CH1,SDMMC2_D0,,OTG_HS_DM,,,EVENTOUT +PortB,PB15,RTC_REFIN,TIM1_CH3N,,TIM8_CH3N,,SPI2_MOSI/I2S2_SD,,,,TIM12_CH2,SDMMC2_D1,,OTG_HS_DP,,,EVENTOUT PortC,PC0,,,,,,,,,SAI2_FS_B,,OTG_HS_ULPI_STP,,FMC_SDNWE,,LCD_R5,EVENTOUT PortC,PC1,TRACED0,,,,,SPI2_MOSI/I2S2_SD,SAI1_SD_A,,,,,ETH_MDC,,,,EVENTOUT PortC,PC2,,,,,,SPI2_MISO,,,,,OTG_HS_ULPI_DIR,ETH_MII_TXD2,FMC_SDNE0,,,EVENTOUT PortC,PC3,,,,,,SPI2_MOSI/I2S2_SD,,,,,OTG_HS_ULPI_NXT,ETH_MII_TX_CLK,FMC_SDCKE0,,,EVENTOUT PortC,PC4,,,,,,I2S1_MCK,,,SPDIFRX_IN2,,,ETH_MII_RXD0/ETH_RMII_RXD0,FMC_SDNE0,,,EVENTOUT PortC,PC5,,,,,,,,,SPDIFRX_IN3,,,ETH_MII_RXD1/ETH_RMII_RXD1,FMC_SDCKE0,,,EVENTOUT -PortC,PC6,,,TIM3_CH1,TIM8_CH1,,I2S2_MCK,,,USART6_TX,,,,SDMMC1_D6,DCMI_D0,LCD_HSYNC,EVENTOUT -PortC,PC7,,,TIM3_CH2,TIM8_CH2,,,I2S3_MCK,,USART6_RX,,,,SDMMC1_D7,DCMI_D1,LCD_G6,EVENTOUT +PortC,PC6,,,TIM3_CH1,TIM8_CH1,,I2S2_MCK,,,USART6_TX,,SDMMC2_D6,,SDMMC1_D6,DCMI_D0,LCD_HSYNC,EVENTOUT +PortC,PC7,,,TIM3_CH2,TIM8_CH2,,,I2S3_MCK,,USART6_RX,,SDMMC2_D7,,SDMMC1_D7,DCMI_D1,LCD_G6,EVENTOUT PortC,PC8,TRACED1,,TIM3_CH3,TIM8_CH3,,,,UART5_RTS,USART6_CK,,,,SDMMC1_D0,DCMI_D2,,EVENTOUT PortC,PC9,MCO2,,TIM3_CH4,TIM8_CH4,I2C3_SDA,I2S_CKIN,,UART5_CTS,,QUADSPI_BK1_IO0,,,SDMMC1_D1,DCMI_D3,,EVENTOUT PortC,PC10,,,,,,,SPI3_SCK/I2S3_CK,USART3_TX,UART4_TX,QUADSPI_BK1_IO1,,,SDMMC1_D2,DCMI_D8,LCD_R2,EVENTOUT @@ -54,8 +54,8 @@ PortD,PD2,TRACED2,,TIM3_ETR,,,,,,UART5_RX,,,,SDMMC1_CMD,DCMI_D11,,EVENTOUT PortD,PD3,,,,,,SPI2_SCK/I2S2_CK,,USART2_CTS,,,,,FMC_CLK,DCMI_D5,LCD_G7,EVENTOUT PortD,PD4,,,,,,,,USART2_RTS,,,,,FMC_NOE,,,EVENTOUT PortD,PD5,,,,,,,,USART2_TX,,,,,FMC_NWE,,,EVENTOUT -PortD,PD6,,,,,,SPI3_MOSI/I2S3_SD,SAI1_SD_A,USART2_RX,,,,,FMC_NWAIT,DCMI_D10,LCD_B2,EVENTOUT -PortD,PD7,,,,,,,,USART2_CK,SPDIFRX_IN0,,,,FMC_NE1,,,EVENTOUT +PortD,PD6,,,,,,SPI3_MOSI/I2S3_SD,SAI1_SD_A,USART2_RX,,,,SDMMC2_CK,FMC_NWAIT,DCMI_D10,LCD_B2,EVENTOUT +PortD,PD7,,,,,,,,USART2_CK,SPDIFRX_IN0,,,SDMMC2_CMD,FMC_NE1,,,EVENTOUT PortD,PD8,,,,,,,,USART3_TX,SPDIFRX_IN1,,,,FMC_D13,,,EVENTOUT PortD,PD9,,,,,,,,USART3_RX,,,,,FMC_D14,,,EVENTOUT PortD,PD10,,,,,,,,USART3_CK,,,,,FMC_D15,,LCD_B3,EVENTOUT @@ -105,10 +105,10 @@ PortG,PG5,,,,,,,,,,,,,FMC_A15/FMC_BA1,,,EVENTOUT PortG,PG6,,,,,,,,,,,,,,DCMI_D12,LCD_R7,EVENTOUT PortG,PG7,,,,,,,,,USART6_CK,,,,FMC_INT,DCMI_D13,LCD_CLK,EVENTOUT PortG,PG8,,,,,,SPI6_NSS,,SPDIFRX_IN2,USART6_RTS,,,ETH_PPS_OUT,FMC_SDCLK,,,EVENTOUT -PortG,PG9,,,,,,,,SPDIFRX_IN3,USART6_RX,QUADSPI_BK2_IO2,SAI2_FS_B,,FMC_NE2/FMC_NCE,DCMI_VSYNC,,EVENTOUT -PortG,PG10,,,,,,,,,,LCD_G3,SAI2_SD_B,,FMC_NE3,DCMI_D2,LCD_B2,EVENTOUT -PortG,PG11,,,,,,,,SPDIFRX_IN0,,,,ETH_MII_TX_EN/ETH_RMII_TX_EN,,DCMI_D3,LCD_B3,EVENTOUT -PortG,PG12,,,,LPTIM1_IN1,,SPI6_MISO,,SPDIFRX_IN1,USART6_RTS,LCD_B4,,,FMC_NE4,,LCD_B1,EVENTOUT +PortG,PG9,,,,,,,,SPDIFRX_IN3,USART6_RX,QUADSPI_BK2_IO2,SAI2_FS_B,SDMMC2_D0,FMC_NE2/FMC_NCE,DCMI_VSYNC,,EVENTOUT +PortG,PG10,,,,,,,,,,LCD_G3,SAI2_SD_B,SDMMC2_D1,FMC_NE3,DCMI_D2,LCD_B2,EVENTOUT +PortG,PG11,,,,,,,,SPDIFRX_IN0,,,SDMMC2_D2,ETH_MII_TX_EN/ETH_RMII_TX_EN,,DCMI_D3,LCD_B3,EVENTOUT +PortG,PG12,,,,LPTIM1_IN1,,SPI6_MISO,,SPDIFRX_IN1,USART6_RTS,LCD_B4,,SDMMC2_D3,FMC_NE4,,LCD_B1,EVENTOUT PortG,PG13,TRACED0,,,LPTIM1_OUT,,SPI6_SCK,,,USART6_CTS,,,ETH_MII_TXD0/ETH_RMII_TXD0,FMC_A24,,LCD_R0,EVENTOUT PortG,PG14,TRACED1,,,LPTIM1_ETR,,SPI6_MOSI,,,USART6_TX,QUADSPI_BK2_IO3,,ETH_MII_TXD1/ETH_RMII_TXD1,FMC_A25,,LCD_B0,EVENTOUT PortG,PG15,,,,,,,,,USART6_CTS,,,,FMC_SDNCAS,DCMI_D13,,EVENTOUT @@ -168,4 +168,3 @@ PortK,PK4,,,,,,,,,,,,,,,LCD_B5,EVENTOUT PortK,PK5,,,,,,,,,,,,,,,LCD_B6,EVENTOUT PortK,PK6,,,,,,,,,,,,,,,LCD_B7,EVENTOUT PortK,PK7,,,,,,,,,,,,,,,LCD_DE,EVENTOUT - diff --git a/stmhal/boards/stm32f769_af.csv b/stmhal/boards/stm32f769_af.csv deleted file mode 100644 index eabc9ab3b..000000000 --- a/stmhal/boards/stm32f769_af.csv +++ /dev/null @@ -1,171 +0,0 @@ -Port,,AF0,AF1,AF2,AF3,AF4,AF5,AF6,AF7,AF8,AF9,AF10,AF11,AF12,AF13,AF14,AF15 -,,SYS,TIM1/2,TIM3/4/5,TIM8/9/10/11/LPTIM1/CEC,I2C1/2/3/4/CEC,SPI1/2/3/4/5/6,SPI3/SAI1,SPI2/3/USART1/2/3/UART5/SPDIFRX,SAI2/USART6/UART4/5/7/8/SPDIFRX,CAN1/2/TIM12/13/14/QUADSPI/LCD,SAI2/QUADSPI/OTG2_HS/OTG1_FS,ETH/OTG1_FS,FMC/SDMMC1/OTG2_FS,DCMI,LCD,SYS -PortA,PA0,,TIM2_CH1/TIM2_ETR,TIM5_CH1,TIM8_ETR,,,,USART2_CTS,UART4_TX,,SAI2_SD_B,ETH_MII_CRS,,,,EVENTOUT -PortA,PA1,,TIM2_CH2,TIM5_CH2,,,,,USART2_RTS,UART4_RX,QUADSPI_BK1_IO3,SAI2_MCK_B,ETH_MII_RX_CLK/ETH_RMII_REF_CLK,,,LCD_R2,EVENTOUT -PortA,PA2,,TIM2_CH3,TIM5_CH3,TIM9_CH1,,,,USART2_TX,SAI2_SCK_B,,,ETH_MDIO,,,LCD_R1,EVENTOUT -PortA,PA3,,TIM2_CH4,TIM5_CH4,TIM9_CH2,,,,USART2_RX,,,OTG_HS_ULPI_D0,ETH_MII_COL,,,LCD_B5,EVENTOUT -PortA,PA4,,,,,,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,USART2_CK,,,,,OTG_HS_SOF,DCMI_HSYNC,LCD_VSYNC,EVENTOUT -PortA,PA5,,TIM2_CH1/TIM2_ETR,TIM8_CH1N,SPI1_SCK/I2S1_CK,,,,,,,OTG_HS_ULPI_CK,,,,LCD_R4,EVENTOUT -PortA,PA6,,TIM1_BKIN,TIM3_CH1,TIM8_BKIN,,SPI1_MISO,,,,TIM13_CH1,,,,DCMI_PIXCLK,LCD_G2,EVENTOUT -PortA,PA7,,TIM1_CH1N,TIM3_CH2,TIM8_CH1N,,SPI1_MOSI/I2S1_SD,,,,TIM14_CH1,,ETH_MII_RX_DV/ETH_RMII_CRS_DV,FMC_SDNWE,,,EVENTOUT -PortA,PA8,MCO1,TIM1_CH1,,TIM8_BKIN2,I2C3_SCL,,,USART1_CK,,,OTG_FS_SOF,,,,LCD_R6,EVENTOUT -PortA,PA9,,TIM1_CH2,,,I2C3_SMBA,SPI2_SCK/I2S2_CK,,USART1_TX,,,,,,DCMI_D0,,EVENTOUT -PortA,PA10,,TIM1_CH3,,,,,,USART1_RX,,,OTG_FS_ID,,,DCMI_D1,,EVENTOUT -PortA,PA11,,TIM1_CH4,,,,,,USART1_CTS,,CAN1_RX,OTG_FS_DM,,,,LCD_R4,EVENTOUT -PortA,PA12,,TIM1_ETR,,,,,,USART1_RTS,SAI2_FS_B,CAN1_TX,OTG_FS_DP,,,,LCD_R5,EVENTOUT -PortA,PA13,JTMS,SWDIO,,,,,,,,,,,,,,EVENTOUT -PortA,PA14,JTCK,SWCLK,,,,,,,,,,,,,,EVENTOUT -PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,HDMICE,CSPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,,UART4_RTS,,,,,,,EVENTOUT -PortB,PB0,,TIM1_CH2N,TIM3_CH3T,IM8_CH2N,,,,,UART4_CTS,LCD_R3,OTG_HS_ULPI_D1,ETH_MII_RXD2,,,,EVENTOUT -PortB,PB1,,TIM1_CH3N,TIM3_CH4T,IM8_CH3N,,,,,,LCD_R6,OTG_HS_ULPI_D2,ETH_MII_RXD3,,,,EVENTOUT -PortB,PB2,,,,,,,SAI1_SD_A,SPI3_MOSI/I2S3_SD,,QUADSPI_CLK,,,,,,EVENTOUT -PortB,PB3,JTDO/TRACESWO,TIM2_CH2,,,,SPI1_SCK/I2S1_CK,SPI3_SCK/I2S3_CK,,,,,,,,,EVENTOUT -PortB,PB4,NJTRST,,TIM3_CH1,,,SPI1_MISO,SPI3_MISO,SPI2_NSS/I2S2_WS,,,,,,,,EVENTOUT -PortB,PB5,,,TIM3_CH2,,I2C1_SMBA,SPI1_MOSI/I2S1_SD,SPI3_MOSI/I2S3_SD,,,CAN2_RX,OTG_HS_ULPI_D7,ETH_PPS_OUT,FMC_SDCKE1,DCMI_D10,,EVENTOUT -PortB,PB6,,,TIM4_CH1,HDMICEC,I2C1_SCL,,,USART1_TX,,CAN2_TX,QUADSPI_BK1_NCS,,FMC_SDNE1,DCMI_D5,,EVENTOUT -PortB,PB7,,,TIM4_CH2,,I2C1_SDA,,,USART1_RX,,,,,FMC_NL,DCMI_VSYNC,,EVENTOUT -PortB,PB8,,,TIM4_CH3,TIM10_CH1,I2C1_SCL,,,,,CAN1_RX,,ETH_MII_TXD3,SDMMC1_D4,DCMI_D6,LCD_B6,EVENTOUT -PortB,PB9,,,TIM4_CH4,TIM11_CH1,I2C1_SDA,SPI2_NSS/I2S2_WS,,,,CAN1_TX,,,SDMMC1_D5,DCMI_D7,LCD_B7,EVENTOUT -PortB,PB10,,TIM2_CH3,,,I2C2_SCL,SPI2_SCK/I2S2_CK,,USART3_TX,,,OTG_HS_ULPI_D3,ETH_MII_RX_ER,,,LCD_G4,EVENTOUT -PortB,PB11,,TIM2_CH4,,,I2C2_SDA,,,USART3_RX,,,OTG_HS_ULPI_D4,ETH_MII_TX_EN/ETH_RMII_TX_EN,,,LCD_G5,EVENTOUT -PortB,PB12,,TIM1_BKIN,,,I2C2_SMBA,SPI2_NSS/I2S2_WS,,USART3_CK,,CAN2_RX,OTG_HS_ULPI_D5,ETH_MII_TXD0/ETH_RMII_TXD0,OTG_HS_ID,,,EVENTOUT -PortB,PB13,,TIM1_CH1N,,,,SPI2_SCK/I2S2_CK,,USART3_CTS,,CAN2_TX,OTG_HS_ULPI_D6,ETH_MII_TXD1/ETH_RMII_TXD1,,,,EVENTOUT -PortB,PB14,,TIM1_CH2N,,TIM8_CH2N,,SPI2_MISO,,USART3_RTS,,TIM12_CH1,,,OTG_HS_DM,,,EVENTOUT -PortB,PB15,RTC_REFIN,TIM1_CH3N,,TIM8_CH3N,,SPI2_MOSI/I2S2_SD,,,,TIM12_CH2,,,OTG_HS_DP,,,EVENTOUT -PortC,PC0,,,,,,,,,SAI2_FS_B,,OTG_HS_ULPI_STP,,FMC_SDNWE,,LCD_R5,EVENTOUT -PortC,PC1,TRACED0,,,,,SPI2_MOSI/I2S2_SD,SAI1_SD_A,,,,,ETH_MDC,,,,EVENTOUT -PortC,PC2,,,,,,SPI2_MISO,,,,,OTG_HS_ULPI_DIR,ETH_MII_TXD2,FMC_SDNE0,,,EVENTOUT -PortC,PC3,,,,,,SPI2_MOSI/I2S2_SD,,,,,OTG_HS_ULPI_NXT,ETH_MII_TX_CLK,FMC_SDCKE0,,,EVENTOUT -PortC,PC4,,,,,,I2S1_MCK,,,SPDIFRX_IN2,,,ETH_MII_RXD0/ETH_RMII_RXD0,FMC_SDNE0,,,EVENTOUT -PortC,PC5,,,,,,,,,SPDIFRX_IN3,,,ETH_MII_RXD1/ETH_RMII_RXD1,FMC_SDCKE0,,,EVENTOUT -PortC,PC6,,,TIM3_CH1,TIM8_CH1,,I2S2_MCK,,,USART6_TX,,,,SDMMC1_D6,DCMI_D0,LCD_HSYNC,EVENTOUT -PortC,PC7,,,TIM3_CH2,TIM8_CH2,,,I2S3_MCK,,USART6_RX,,,,SDMMC1_D7,DCMI_D1,LCD_G6,EVENTOUT -PortC,PC8,TRACED1,,TIM3_CH3,TIM8_CH3,,,,UART5_RTS,USART6_CK,,,,SDMMC1_D0,DCMI_D2,,EVENTOUT -PortC,PC9,MCO2,,TIM3_CH4,TIM8_CH4,I2C3_SDA,I2S_CKIN,,UART5_CTS,,QUADSPI_BK1_IO0,,,SDMMC1_D1,DCMI_D3,,EVENTOUT -PortC,PC10,,,,,,,SPI3_SCK/I2S3_CK,USART3_TX,UART4_TX,QUADSPI_BK1_IO1,,,SDMMC1_D2,DCMI_D8,LCD_R2,EVENTOUT -PortC,PC11,,,,,,,SPI3_MISO,USART3_RX,UART4_RX,QUADSPI_BK2_NCS,,,SDMMC1_D3,DCMI_D4,,EVENTOUT -PortC,PC12,TRACED3,,,,,,SPI3_MOSI/I2S3_SD,USART3_CK,UART5_TX,,,,SDMMC1_CK,DCMI_D9,,EVENTOUT -PortC,PC13,,,,,,,,,,,,,,,,EVENTOUT -PortC,PC14,,,,,,,,,,,,,,,,EVENTOUT -PortC,PC15,,,,,,,,,,,,,,,,EVENTOUT -PortD,PD0,,,,,,,,,,CAN1_RX,,,FMC_D2,,,EVENTOUT -PortD,PD1,,,,,,,,,,CAN1_TX,,,FMC_D3,,,EVENTOUT -PortD,PD2,TRACED2,,TIM3_ETR,,,,,,UART5_RX,,,,SDMMC1_CMD,DCMI_D11,,EVENTOUT -PortD,PD3,,,,,,SPI2_SCK/I2S2_CK,,USART2_CTS,,,,,FMC_CLK,DCMI_D5,LCD_G7,EVENTOUT -PortD,PD4,,,,,,,,USART2_RTS,,,,,FMC_NOE,,,EVENTOUT -PortD,PD5,,,,,,,,USART2_TX,,,,,FMC_NWE,,,EVENTOUT -PortD,PD6,,,,,,SPI3_MOSI/I2S3_SD,SAI1_SD_A,USART2_RX,,,,,FMC_NWAIT,DCMI_D10,LCD_B2,EVENTOUT -PortD,PD7,,,,,,,,USART2_CK,SPDIFRX_IN0,,,,FMC_NE1,,,EVENTOUT -PortD,PD8,,,,,,,,USART3_TX,SPDIFRX_IN1,,,,FMC_D13,,,EVENTOUT -PortD,PD9,,,,,,,,USART3_RX,,,,,FMC_D14,,,EVENTOUT -PortD,PD10,,,,,,,,USART3_CK,,,,,FMC_D15,,LCD_B3,EVENTOUT -PortD,PD11,,,,,I2C4_SMBA,,,USART3_CTS,,QUADSPI_BK1_IO0,SAI2_SD_A,,FMC_A16/FMC_CLE,,,EVENTOUT -PortD,PD12,,,TIM4_CH1,LPTIM1_IN1,I2C4_SCL,,,USART3_RTS,,QUADSPI_BK1_IO1,SAI2_FS_A,,FMC_A17/FMC_ALE,,,EVENTOUT -PortD,PD13,,,TIM4_CH2,LPTIM1_OUT,I2C4_SDA,,,,,QUADSPI_BK1_IO3,SAI2_SCK_A,,FMC_A18,,,EVENTOUT -PortD,PD14,,,TIM4_CH3,,,,,,UART8_CTS,,,,FMC_D0,,,EVENTOUT -PortD,PD15,,,TIM4_CH4,,,,,,UART8_RTS,,,,FMC_D1,,,EVENTOUT -PortE,PE0,,,TIM4_ETR,LPTIM1_ETR,,,,,UART8_RX,,SAI2_MCK_A,,FMC_NBL0,DCMI_D2,,EVENTOUT -PortE,PE1,,,,LPTIM1_IN2,,,,,UART8_TX,,,,FMC_NBL1,DCMI_D3,,EVENTOUT -PortE,PE2,TRACECLK,,,,,SPI4_SCK,SAI1_MCLK_A,,,QUADSPI_BK1_IO2,,ETH_MII_TXD3,FMC_A23,,,EVENTOUT -PortE,PE3,TRACED0,,,,,,SAI1_SD_B,,,,,,FMC_A19,,,EVENTOUT -PortE,PE4,TRACED1,,,,,SPI4_NSS,SAI1_FS_A,,,,,,FMC_A20,DCMI_D4,LCD_B0,EVENTOUT -PortE,PE5,TRACED2,,,TIM9_CH1,,SPI4_MISO,SAI1_SCK_A,,,,,,FMC_A21,DCMI_D6,LCD_G0,EVENTOUT -PortE,PE6,TRACED3,TIM1_BKIN2,,TIM9_CH2,,SPI4_MOSI,SAI1_SD_A,,,,SAI2_MCK_B,,FMC_A22,DCMI_D7,LCD_G1,EVENTOUT -PortE,PE7,,TIM1_ETR,,,,,,,UART7_RX,,QUADSPI_BK2_IO0,,FMC_D4,,,EVENTOUT -PortE,PE8,,TIM1_CH1N,,,,,,,UART7_TX,,QUADSPI_BK2_IO1,,FMC_D5,,,EVENTOUT -PortE,PE9,,TIM1_CH1,,,,,,,UART7_RTS,,QUADSPI_BK2_IO2,,FMC_D6,,,EVENTOUT -PortE,PE10,,TIM1_CH2N,,,,,,,UART7_CTS,,QUADSPI_BK2_IO3,,FMC_D7,,,EVENTOUT -PortE,PE11,,TIM1_CH2,,,,SPI4_NSS,,,,,SAI2_SD_B,,FMC_D8,,LCD_G3,EVENTOUT -PortE,PE12,,TIM1_CH3N,,,,SPI4_SCK,,,,,SAI2_SCK_B,,FMC_D9,,LCD_B4,EVENTOUT -PortE,PE13,,TIM1_CH3,,,,SPI4_MISO,,,,,SAI2_FS_B,,FMC_D10,,LCD_DE,EVENTOUT -PortE,PE14,,TIM1_CH4,,,,SPI4_MOSI,,,,,SAI2_MCK_B,,FMC_D11,,LCD_CLK,EVENTOUT -PortE,PE15,,TIM1_BKIN,,,,,,,,,,,FMC_D12,,LCD_R7,EVENTOUT -PortF,PF0,,,,,I2C2_SDA,,,,,,,,FMC_A0,,,EVENTOUT -PortF,PF1,,,,,I2C2_SCL,,,,,,,,FMC_A1,,,EVENTOUT -PortF,PF2,,,,,I2C2_SMBA,,,,,,,,FMC_A2,,,EVENTOUT -PortF,PF3,,,,,,,,,,,,,FMC_A3,,,EVENTOUT -PortF,PF4,,,,,,,,,,,,,FMC_A4,,,EVENTOUT -PortF,PF5,,,,,,,,,,,,,FMC_A5,,,EVENTOUT -PortF,PF6,,,,TIM10_CH1,,SPI5_NSS,SAI1_SD_B,,UART7_RX,QUADSPI_BK1_IO3,,,,,,EVENTOUT -PortF,PF7,,,,TIM11_CH1,,SPI5_SCK,SAI1_MCLK_B,,UART7_TX,QUADSPI_BK1_IO2,,,,,,EVENTOUT -PortF,PF8,,,,,,SPI5_MISO,SAI1_SCK_B,,UART7_RTS,TIM13_CH1,QUADSPI_BK1_IO0,,,,,EVENTOUT -PortF,PF9,,,,,,SPI5_MOSI,SAI1_FS_B,,UART7_CTS,TIM14_CH1,QUADSPI_BK1_IO1,,,,,EVENTOUT -PortF,PF10,,,,,,,,,,,,,,DCMI_D11,LCD_DE,EVENTOUT -PortF,PF11,,,,,,SPI5_MOSI,,,,,SAI2_SD_B,,FMC_SDNRAS,DCMI_D12,,EVENTOUT -PortF,PF12,,,,,,,,,,,,,FMC_A6,,,EVENTOUT -PortF,PF13,,,,,I2C4_SMBA,,,,,,,,FMC_A7,,,EVENTOUT -PortF,PF14,,,,,I2C4_SCL,,,,,,,,FMC_A8,,,EVENTOUT -PortF,PF15,,,,,I2C4_SDA,,,,,,,,FMC_A9,,,EVENTOUT -PortG,PG0,,,,,,,,,,,,,FMC_A10,,,EVENTOUT -PortG,PG1,,,,,,,,,,,,,FMC_A11,,,EVENTOUT -PortG,PG2,,,,,,,,,,,,,FMC_A12,,,EVENTOUT -PortG,PG3,,,,,,,,,,,,,FMC_A13,,,EVENTOUT -PortG,PG4,,,,,,,,,,,,,FMC_A14/FMC_BA0,,,EVENTOUT -PortG,PG5,,,,,,,,,,,,,FMC_A15/FMC_BA1,,,EVENTOUT -PortG,PG6,,,,,,,,,,,,,,DCMI_D12,LCD_R7,EVENTOUT -PortG,PG7,,,,,,,,,USART6_CK,,,,FMC_INT,DCMI_D13,LCD_CLK,EVENTOUT -PortG,PG8,,,,,,SPI6_NSS,,SPDIFRX_IN2,USART6_RTS,,,ETH_PPS_OUT,FMC_SDCLK,,,EVENTOUT -PortG,PG9,,,,,,,,SPDIFRX_IN3,USART6_RX,QUADSPI_BK2_IO2,SAI2_FS_B,,FMC_NE2/FMC_NCE,DCMI_VSYNC,,EVENTOUT -PortG,PG10,,,,,,,,,,LCD_G3,SAI2_SD_B,,FMC_NE3,DCMI_D2,LCD_B2,EVENTOUT -PortG,PG11,,,,,,,,SPDIFRX_IN0,,,,ETH_MII_TX_EN/ETH_RMII_TX_EN,,DCMI_D3,LCD_B3,EVENTOUT -PortG,PG12,,,,LPTIM1_IN1,,SPI6_MISO,,SPDIFRX_IN1,USART6_RTS,LCD_B4,,,FMC_NE4,,LCD_B1,EVENTOUT -PortG,PG13,TRACED0,,,LPTIM1_OUT,,SPI6_SCK,,,USART6_CTS,,,ETH_MII_TXD0/ETH_RMII_TXD0,FMC_A24,,LCD_R0,EVENTOUT -PortG,PG14,TRACED1,,,LPTIM1_ETR,,SPI6_MOSI,,,USART6_TX,QUADSPI_BK2_IO3,,ETH_MII_TXD1/ETH_RMII_TXD1,FMC_A25,,LCD_B0,EVENTOUT -PortG,PG15,,,,,,,,,USART6_CTS,,,,FMC_SDNCAS,DCMI_D13,,EVENTOUT -PortH,PH0,,,,,,,,,,,,,,,,EVENTOUT -PortH,PH1,,,,,,,,,,,,,,,,EVENTOUT -PortH,PH2,,,,LPTIM1_IN2,,,,,,QUADSPI_BK2_IO0,SAI2_SCK_B,ETH_MII_CRS,FMC_SDCKE0,,LCD_R0,EVENTOUT -PortH,PH3,,,,,,,,,,QUADSPI_BK2_IO1,SAI2_MCK_B,ETH_MII_COL,FMC_SDNE0,,LCD_R1,EVENTOUT -PortH,PH4,,,,,I2C2_SCL,,,,,,OTG_HS_ULPI_NXT,,,,,EVENTOUT -PortH,PH5,,,,,I2C2_SDA,SPI5_NSS,,,,,,,FMC_SDNWE,,,EVENTOUT -PortH,PH6,,,,,I2C2_SMBA,SPI5_SCK,,,,TIM12_CH1,,ETH_MII_RXD2,FMC_SDNE1,DCMI_D8,,EVENTOUT -PortH,PH7,,,,,I2C3_SCL,SPI5_MISO,,,,,,ETH_MII_RXD3,FMC_SDCKE1,DCMI_D9,,EVENTOUT -PortH,PH8,,,,,I2C3_SDA,,,,,,,,FMC_D16,DCMI_HSYNC,LCD_R2,EVENTOUT -PortH,PH9,,,,,I2C3_SMBA,,,,,TIM12_CH2,,,FMC_D17,DCMI_D0,LCD_R3,EVENTOUT -PortH,PH10,,,TIM5_CH1,,I2C4_SMBA,,,,,,,,FMC_D18,DCMI_D1,LCD_R4,EVENTOUT -PortH,PH11,,,TIM5_CH2,,I2C4_SCL,,,,,,,,FMC_D19,DCMI_D2,LCD_R5,EVENTOUT -PortH,PH12,,,TIM5_CH3,,I2C4_SDA,,,,,,,,FMC_D20,DCMI_D3,LCD_R6,EVENTOUT -PortH,PH13,,,,TIM8_CH1N,,,,,,CAN1_TX,,,FMC_D21,,LCD_G2,EVENTOUT -PortH,PH14,,,,TIM8_CH2N,,,,,,,,,FMC_D22,DCMI_D4,LCD_G3,EVENTOUT -PortH,PH15,,,,TIM8_CH3N,,,,,,,,,FMC_D23,DCMI_D11,LCD_G4,EVENTOUT -PortI,PI0,,,TIM5_CH4,,,SPI2_NSS/I2S2_WS,,,,,,,FMC_D24,DCMI_D13,LCD_G5,EVENTOUT -PortI,PI1,,,,TIM8_BKIN2,,SPI2_SCK/I2S2_CK,,,,,,,FMC_D25,DCMI_D8,LCD_G6,EVENTOUT -PortI,PI2,,,,TIM8_CH4,,SPI2_MISO,,,,,,,FMC_D26,DCMI_D9,LCD_G7,EVENTOUT -PortI,PI3,,,,TIM8_ETR,,SPI2_MOSI/I2S2_SD,,,,,,,FMC_D27,DCMI_D10,,EVENTOUT -PortI,PI4,,,,TIM8_BKIN,,,,,,,SAI2_MCK_A,,FMC_NBL2,DCMI_D5,LCD_B4,EVENTOUT -PortI,PI5,,,,TIM8_CH1,,,,,,,SAI2_SCK_A,,FMC_NBL3,DCMI_VSYNC,LCD_B5,EVENTOUT -PortI,PI6,,,,TIM8_CH2,,,,,,,SAI2_SD_A,,FMC_D28,DCMI_D6,LCD_B6,EVENTOUT -PortI,PI7,,,,TIM8_CH3,,,,,,,SAI2_FS_A,,FMC_D29,DCMI_D7,LCD_B7,EVENTOUT -PortI,PI8,,,,,,,,,,,,,,,,EVENTOUT -PortI,PI9,,,,,,,,,,CAN1_RX,,,FMC_D30,,LCD_VSYNC,EVENTOUT -PortI,PI10,,,,,,,,,,,,ETH_MII_RX_ER,FMC_D31,,LCD_HSYNC,EVENTOUT -PortI,PI11,,,,,,,,,,,OTG_HS_ULPI_DIR,,,,,EVENTOUT -PortI,PI12,,,,,,,,,,,,,,,LCD_HSYNC,EVENTOUT -PortI,PI13,,,,,,,,,,,,,,,LCD_VSYNC,EVENTOUT -PortI,PI14,,,,,,,,,,,,,,,LCD_CLK,EVENTOUT -PortI,PI15,,,,,,,,,,,,,,,LCD_R0,EVENTOUT -PortJ,PJ0,,,,,,,,,,,,,,,LCD_R1,EVENTOUT -PortJ,PJ1,,,,,,,,,,,,,,,LCD_R2,EVENTOUT -PortJ,PJ2,,,,,,,,,,,,,,,LCD_R3,EVENTOUT -PortJ,PJ3,,,,,,,,,,,,,,,LCD_R4,EVENTOUT -PortJ,PJ4,,,,,,,,,,,,,,,LCD_R5,EVENTOUT -PortJ,PJ5,,,,,,,,,,,,,,,LCD_R6,EVENTOUT -PortJ,PJ6,,,,,,,,,,,,,,,LCD_R7,EVENTOUT -PortJ,PJ7,,,,,,,,,,,,,,,LCD_G0,EVENTOUT -PortJ,PJ8,,,,,,,,,,,,,,,LCD_G1,EVENTOUT -PortJ,PJ9,,,,,,,,,,,,,,,LCD_G2,EVENTOUT -PortJ,PJ10,,,,,,,,,,,,,,,LCD_G3,EVENTOUT -PortJ,PJ11,,,,,,,,,,,,,,,LCD_G4,EVENTOUT -PortJ,PJ12,,,,,,,,,,,,,,,LCD_B0,EVENTOUT -PortJ,PJ13,,,,,,,,,,,,,,,LCD_B1,EVENTOUT -PortJ,PJ14,,,,,,,,,,,,,,,LCD_B2,EVENTOUT -PortJ,PJ15,,,,,,,,,,,,,,,LCD_B3,EVENTOUT -PortK,PK0,,,,,,,,,,,,,,,LCD_G5,EVENTOUT -PortK,PK1,,,,,,,,,,,,,,,LCD_G6,EVENTOUT -PortK,PK2,,,,,,,,,,,,,,,LCD_G7,EVENTOUT -PortK,PK3,,,,,,,,,,,,,,,LCD_B4,EVENTOUT -PortK,PK4,,,,,,,,,,,,,,,LCD_B5,EVENTOUT -PortK,PK5,,,,,,,,,,,,,,,LCD_B6,EVENTOUT -PortK,PK6,,,,,,,,,,,,,,,LCD_B7,EVENTOUT -PortK,PK7,,,,,,,,,,,,,,,LCD_DE,EVENTOUT - |