diff options
Diffstat (limited to 'supervisor/shared/external_flash/devices.h')
| -rw-r--r-- | supervisor/shared/external_flash/devices.h | 994 |
1 files changed, 497 insertions, 497 deletions
diff --git a/supervisor/shared/external_flash/devices.h b/supervisor/shared/external_flash/devices.h index c8c941adf..edc6419ef 100644 --- a/supervisor/shared/external_flash/devices.h +++ b/supervisor/shared/external_flash/devices.h @@ -55,662 +55,662 @@ typedef struct { // Supports the quad input page program command 0x32. This is known as 1-1-4 because it only // uses all four lines for data. - bool supports_qspi_writes: 1; + bool supports_qspi_writes : 1; // Requires a separate command 0x31 to write to the second byte of the status register. // Otherwise two byte are written via 0x01. - bool write_status_register_split: 1; + bool write_status_register_split : 1; // True when the status register is a single byte. This implies the Quad Enable bit is in the // first byte and the Read Status Register 2 command (0x35) is unsupported. - bool single_status_byte: 1; + bool single_status_byte : 1; // Does not support using a ready bit within the status register - bool no_ready_bit: 1; + bool no_ready_bit : 1; // Does not support the erase command (0x20) - bool no_erase_cmd: 1; + bool no_erase_cmd : 1; // Device does not have a reset command - bool no_reset_cmd: 1; + bool no_reset_cmd : 1; } external_flash_device; // Settings for the Adesto Tech AT25DF081A 1MiB SPI flash. It's on the SAMD21 // Xplained board. // Datasheet: https://www.adestotech.com/wp-content/uploads/doc8715.pdf -#define AT25DF081A {\ - .total_size = (1 << 20), /* 1 MiB */ \ - .start_up_time_us = 10000, \ - .manufacturer_id = 0x1f, \ - .memory_type = 0x45, \ - .capacity = 0x01, \ - .max_clock_speed_mhz = 85, \ - .quad_enable_bit_mask = 0x00, \ - .has_sector_protection = true, \ - .supports_fast_read = true, \ - .supports_qspi = false, \ - .supports_qspi_writes = false, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define AT25DF081A { \ + .total_size = (1 << 20), /* 1 MiB */ \ + .start_up_time_us = 10000, \ + .manufacturer_id = 0x1f, \ + .memory_type = 0x45, \ + .capacity = 0x01, \ + .max_clock_speed_mhz = 85, \ + .quad_enable_bit_mask = 0x00, \ + .has_sector_protection = true, \ + .supports_fast_read = true, \ + .supports_qspi = false, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Adesto Tech AT25DF641-SSHD-T 8MiB SPI flash // for the Oak Dev Tech Icy Tree M0 (SAMD21) feather board. // Source: https://www.digikey.com/product-detail/en/adesto-technologies/AT25SF641-SDHD-T/1265-1180-1-ND/ // Datasheet: https://www.adestotech.com/wp-content/uploads/doc8693.pdf -#define AT25DF641A {\ - .total_size = (1 << 23), /* 8 MiB */ \ - .start_up_time_us = 10000, \ - .manufacturer_id = 0x1f, \ - .memory_type = 0x48, \ - .capacity = 0x00, \ - .max_clock_speed_mhz = 85, \ - .quad_enable_bit_mask = 0x00, \ - .has_sector_protection = true, \ - .supports_fast_read = true, \ - .supports_qspi = false, \ - .supports_qspi_writes = false, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define AT25DF641A { \ + .total_size = (1 << 23), /* 8 MiB */ \ + .start_up_time_us = 10000, \ + .manufacturer_id = 0x1f, \ + .memory_type = 0x48, \ + .capacity = 0x00, \ + .max_clock_speed_mhz = 85, \ + .quad_enable_bit_mask = 0x00, \ + .has_sector_protection = true, \ + .supports_fast_read = true, \ + .supports_qspi = false, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Adesto Tech AT25SF161-SSHD-T 2MiB SPI flash // for the StringCar M0 (SAMD21) Express board. // Source: https://www.digikey.com/product-detail/en/adesto-technologies/AT25SF161-SDHD-T/1265-1230-1-ND/ // Datasheet: https://www.adestotech.com/wpo-content/uploads/jDS-AT25SF161_046.pdf -#define AT25SF161 {\ - .total_size = (1 << 21), /* 2 MiB */ \ - .start_up_time_us = 10000, \ - .manufacturer_id = 0x1f, \ - .memory_type = 0x86, \ - .capacity = 0x01, \ - .max_clock_speed_mhz = 85, \ - .quad_enable_bit_mask = 0x00, \ - .has_sector_protection = true, \ - .supports_fast_read = true, \ - .supports_qspi = false, \ - .supports_qspi_writes = false, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define AT25SF161 { \ + .total_size = (1 << 21), /* 2 MiB */ \ + .start_up_time_us = 10000, \ + .manufacturer_id = 0x1f, \ + .memory_type = 0x86, \ + .capacity = 0x01, \ + .max_clock_speed_mhz = 85, \ + .quad_enable_bit_mask = 0x00, \ + .has_sector_protection = true, \ + .supports_fast_read = true, \ + .supports_qspi = false, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Adesto Tech AT25SF041 1MiB SPI flash. It's on the SparkFun // SAMD51 Thing Plus board // Datasheet: https://www.adestotech.com/wp-content/uploads/DS-AT25SF041_044.pdf -#define AT25SF041A {\ - .total_size = (1 << 19), /* 512 KiB */ \ - .start_up_time_us = 10000, \ - .manufacturer_id = 0x1f, \ - .memory_type = 0x84, \ - .capacity = 0x01, \ - .max_clock_speed_mhz = 85, \ - .quad_enable_bit_mask = 0x00, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = false, \ - .supports_qspi_writes = false, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define AT25SF041A { \ + .total_size = (1 << 19), /* 512 KiB */ \ + .start_up_time_us = 10000, \ + .manufacturer_id = 0x1f, \ + .memory_type = 0x84, \ + .capacity = 0x01, \ + .max_clock_speed_mhz = 85, \ + .quad_enable_bit_mask = 0x00, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = false, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Gigadevice GD25Q16C 2MiB SPI flash. // Datasheet: http://www.gigadevice.com/datasheet/gd25q16c/ -#define GD25Q16C {\ - .total_size = (1 << 21), /* 2 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xc8, \ - .memory_type = 0x40, \ - .capacity = 0x15, \ - .max_clock_speed_mhz = 104, /* if we need 120 then we can turn on high performance mode */ \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define GD25Q16C { \ + .total_size = (1 << 21), /* 2 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xc8, \ + .memory_type = 0x40, \ + .capacity = 0x15, \ + .max_clock_speed_mhz = 104, /* if we need 120 then we can turn on high performance mode */ \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Gigadevice GD25Q32C 4MiB SPI flash. // Datasheet: http://www.elm-tech.com/en/products/spi-flash-memory/gd25q32/gd25q32.pdf -#define GD25Q32C {\ - .total_size = (1 << 22), /* 4 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xc8, \ - .memory_type = 0x40, \ - .capacity = 0x16, \ - .max_clock_speed_mhz = 104, /* if we need 120 then we can turn on high performance mode */ \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = true, \ - .single_status_byte = false, \ +#define GD25Q32C { \ + .total_size = (1 << 22), /* 4 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xc8, \ + .memory_type = 0x40, \ + .capacity = 0x16, \ + .max_clock_speed_mhz = 104, /* if we need 120 then we can turn on high performance mode */ \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = true, \ + .single_status_byte = false, \ } // Settings for the Gigadevice GD25Q64C 8MiB SPI flash. // Datasheet: http://www.elm-tech.com/en/products/spi-flash-memory/gd25q64/gd25q64.pdf -#define GD25Q64C {\ - .total_size = (1 << 23), /* 8 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xc8, \ - .memory_type = 0x40, \ - .capacity = 0x17, \ - .max_clock_speed_mhz = 104, /* if we need 120 then we can turn on high performance mode */ \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = true, \ - .single_status_byte = false, \ +#define GD25Q64C { \ + .total_size = (1 << 23), /* 8 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xc8, \ + .memory_type = 0x40, \ + .capacity = 0x17, \ + .max_clock_speed_mhz = 104, /* if we need 120 then we can turn on high performance mode */ \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = true, \ + .single_status_byte = false, \ } // Settings for the Gigadevice GD25S512MD 64MiB SPI flash. // Datasheet: http://www.gigadevice.com/datasheet/gd25s512md/ -#define GD25S512MD {\ - .total_size = (1 << 26), /* 64 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xc8, \ - .memory_type = 0x40, \ - .capacity = 0x19, \ - .max_clock_speed_mhz = 104, /* if we need 120 then we can turn on high performance mode */ \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = true, \ - .single_status_byte = false, \ +#define GD25S512MD { \ + .total_size = (1 << 26), /* 64 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xc8, \ + .memory_type = 0x40, \ + .capacity = 0x19, \ + .max_clock_speed_mhz = 104, /* if we need 120 then we can turn on high performance mode */ \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = true, \ + .single_status_byte = false, \ } // Settings for the Cypress (was Spansion) S25FL064L 8MiB SPI flash. // Datasheet: http://www.cypress.com/file/316661/download -#define S25FL064L {\ - .total_size = (1 << 23), /* 8 MiB */ \ - .start_up_time_us = 300, \ - .manufacturer_id = 0x01, \ - .memory_type = 0x60, \ - .capacity = 0x17, \ - .max_clock_speed_mhz = 108, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define S25FL064L { \ + .total_size = (1 << 23), /* 8 MiB */ \ + .start_up_time_us = 300, \ + .manufacturer_id = 0x01, \ + .memory_type = 0x60, \ + .capacity = 0x17, \ + .max_clock_speed_mhz = 108, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Cypress (was Spansion) S25FL116K 2MiB SPI flash. // Datasheet: http://www.cypress.com/file/196886/download -#define S25FL116K {\ - .total_size = (1 << 21), /* 2 MiB */ \ - .start_up_time_us = 10000, \ - .manufacturer_id = 0x01, \ - .memory_type = 0x40, \ - .capacity = 0x15, \ - .max_clock_speed_mhz = 108, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = false, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define S25FL116K { \ + .total_size = (1 << 21), /* 2 MiB */ \ + .start_up_time_us = 10000, \ + .manufacturer_id = 0x01, \ + .memory_type = 0x40, \ + .capacity = 0x15, \ + .max_clock_speed_mhz = 108, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Cypress (was Spansion) S25FL216K 2MiB SPI flash. // Datasheet: http://www.cypress.com/file/197346/download -#define S25FL216K {\ - .total_size = (1 << 21), /* 2 MiB */ \ - .start_up_time_us = 10000, \ - .manufacturer_id = 0x01, \ - .memory_type = 0x40, \ - .capacity = 0x15, \ - .max_clock_speed_mhz = 65, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = false, \ - .supports_qspi_writes = false, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define S25FL216K { \ + .total_size = (1 << 21), /* 2 MiB */ \ + .start_up_time_us = 10000, \ + .manufacturer_id = 0x01, \ + .memory_type = 0x40, \ + .capacity = 0x15, \ + .max_clock_speed_mhz = 65, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = false, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Winbond W25Q16FW 2MiB SPI flash. // Datasheet: https://www.winbond.com/resource-files/w25q16fw%20revj%2005182017%20sfdp.pdf -#define W25Q16FW {\ - .total_size = (1 << 21), /* 2 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x60, \ - .capacity = 0x15, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define W25Q16FW { \ + .total_size = (1 << 21), /* 2 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x60, \ + .capacity = 0x15, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Winbond W25Q16JV-IQ 2MiB SPI flash. Note that JV-IM has a different .memory_type (0x70) // Datasheet: https://www.winbond.com/resource-files/w25q16jv%20spi%20revf%2005092017.pdf -#define W25Q16JV_IQ {\ - .total_size = (1 << 21), /* 2 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x40, \ - .capacity = 0x15, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define W25Q16JV_IQ { \ + .total_size = (1 << 21), /* 2 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x40, \ + .capacity = 0x15, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Winbond W25Q16JV-IM 2MiB SPI flash. Note that JV-IQ has a different .memory_type (0x40) // Datasheet: https://www.winbond.com/resource-files/w25q16jv%20spi%20revf%2005092017.pdf -#define W25Q16JV_IM {\ - .total_size = (1 << 21), /* 2 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x70, \ - .capacity = 0x15, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ +#define W25Q16JV_IM { \ + .total_size = (1 << 21), /* 2 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x70, \ + .capacity = 0x15, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ } // Settings for the Winbond W25Q32BV 4MiB SPI flash. // Datasheet: https://www.winbond.com/resource-files/w25q32bv_revi_100413_wo_automotive.pdf -#define W25Q32BV {\ - .total_size = (1 << 22), /* 4 MiB */ \ - .start_up_time_us = 10000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x60, \ - .capacity = 0x16, \ - .max_clock_speed_mhz = 104, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = false, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define W25Q32BV { \ + .total_size = (1 << 22), /* 4 MiB */ \ + .start_up_time_us = 10000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x60, \ + .capacity = 0x16, \ + .max_clock_speed_mhz = 104, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Winbond W25Q32JV-IM 4MiB SPI flash. // Datasheet: https://www.winbond.com/resource-files/w25q32jv%20revg%2003272018%20plus.pdf -#define W25Q32JV_IM {\ - .total_size = (1 << 22), /* 4 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x70, \ - .capacity = 0x16, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ +#define W25Q32JV_IM { \ + .total_size = (1 << 22), /* 4 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x70, \ + .capacity = 0x16, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ } // Settings for the Winbond W25Q32JV-IQ 4MiB SPI flash. // Datasheet: https://www.mouser.com/datasheet/2/949/w25q32jv_revg_03272018_plus-1489806.pdf -#define W25Q32JV_IQ {\ - .total_size = (1 << 22), /* 4 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x40, \ - .capacity = 0x16, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ +#define W25Q32JV_IQ { \ + .total_size = (1 << 22), /* 4 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x40, \ + .capacity = 0x16, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ } // Settings for the Winbond W25Q64FV 8MiB SPI flash. // Datasheet: https://www.winbond.com/resource-files/w25q64fv%20revs%2007182017.pdf -#define W25Q64FV {\ - .total_size = (1 << 23), /* 8 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x40, \ - .capacity = 0x17, \ - .max_clock_speed_mhz = 104, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define W25Q64FV { \ + .total_size = (1 << 23), /* 8 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x40, \ + .capacity = 0x17, \ + .max_clock_speed_mhz = 104, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Winbond W25Q64JV-IM 8MiB SPI flash. Note that JV-IQ has a different .memory_type (0x40) // Datasheet: http://www.winbond.com/resource-files/w25q64jv%20revj%2003272018%20plus.pdf -#define W25Q64JV_IM {\ - .total_size = (1 << 23), /* 8 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x70, \ - .capacity = 0x17, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define W25Q64JV_IM { \ + .total_size = (1 << 23), /* 8 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x70, \ + .capacity = 0x17, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Winbond W25Q64JV-IQ 8MiB SPI flash. Note that JV-IM has a different .memory_type (0x70) // Datasheet: http://www.winbond.com/resource-files/w25q64jv%20revj%2003272018%20plus.pdf -#define W25Q64JV_IQ {\ - .total_size = (1 << 23), /* 8 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x40, \ - .capacity = 0x17, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define W25Q64JV_IQ { \ + .total_size = (1 << 23), /* 8 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x40, \ + .capacity = 0x17, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Winbond W25Q80DL 1MiB SPI flash. // Datasheet: https://www.winbond.com/resource-files/w25q80dv%20dl_revh_10022015.pdf -#define W25Q80DL {\ - .total_size = (1 << 20), /* 1 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x60, \ - .capacity = 0x14, \ - .max_clock_speed_mhz = 104, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = false, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define W25Q80DL { \ + .total_size = (1 << 20), /* 1 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x60, \ + .capacity = 0x14, \ + .max_clock_speed_mhz = 104, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Winbond W25Q80DV 1MiB SPI flash.. Note that W25Q80DL has a different memory type (0x60) // Datasheet: https://www.winbond.com/resource-files/w25q80dv%20dl_revh_10022015.pdf -#define W25Q80DV {\ - .total_size = (1 << 20), /* 1 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x40, \ - .capacity = 0x14, \ - .max_clock_speed_mhz = 104, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = false, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define W25Q80DV { \ + .total_size = (1 << 20), /* 1 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x40, \ + .capacity = 0x14, \ + .max_clock_speed_mhz = 104, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Winbond W25Q128JV-SQ 16MiB SPI flash. Note that JV-IM has a different .memory_type (0x70) // Datasheet: https://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf -#define W25Q128JV_SQ {\ - .total_size = (1 << 24), /* 16 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x40, \ - .capacity = 0x18, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define W25Q128JV_SQ { \ + .total_size = (1 << 24), /* 16 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x40, \ + .capacity = 0x18, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the Everspin MR20H40 / MR25H40 magnetic non-volatile RAM // Datasheet: https://www.everspin.com/supportdocs/MR25H40CDFR -#define MR2xH40 {\ - .total_size = (1 << 22), /* 4 MiB */ \ - .start_up_time_us = 10000, \ - .manufacturer_id = 0xef, /*no JDEC*/ \ - .memory_type = 0x40, /*no JDEC*/ \ - .capacity = 0x14, /*no JDEC*/ \ - .max_clock_speed_mhz = 10, \ - .quad_enable_bit_mask = 0x00, \ - .has_sector_protection = false, \ - .supports_fast_read = false, \ - .supports_qspi = false, \ - .supports_qspi_writes = false, \ - .write_status_register_split = false, \ - .single_status_byte = true, \ - .no_ready_bit = true, \ - .no_erase_cmd = true, \ - .no_reset_cmd = true, \ +#define MR2xH40 { \ + .total_size = (1 << 22), /* 4 MiB */ \ + .start_up_time_us = 10000, \ + .manufacturer_id = 0xef, /*no JDEC*/ \ + .memory_type = 0x40, /*no JDEC*/ \ + .capacity = 0x14, /*no JDEC*/ \ + .max_clock_speed_mhz = 10, \ + .quad_enable_bit_mask = 0x00, \ + .has_sector_protection = false, \ + .supports_fast_read = false, \ + .supports_qspi = false, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = true, \ + .no_ready_bit = true, \ + .no_erase_cmd = true, \ + .no_reset_cmd = true, \ } // Settings for the Macronix MX25L1606 2MiB SPI flash. // Datasheet: -#define MX25L1606 {\ - .total_size = (1 << 21), /* 2 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xc2, \ - .memory_type = 0x20, \ - .capacity = 0x15, \ - .max_clock_speed_mhz = 8, \ - .quad_enable_bit_mask = 0x40, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = true, \ +#define MX25L1606 { \ + .total_size = (1 << 21), /* 2 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xc2, \ + .memory_type = 0x20, \ + .capacity = 0x15, \ + .max_clock_speed_mhz = 8, \ + .quad_enable_bit_mask = 0x40, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = true, \ } // Settings for the Macronix MX25L3233F 4MiB SPI flash. // Datasheet: http://www.macronix.com/Lists/Datasheet/Attachments/7426/MX25L3233F,%203V,%2032Mb,%20v1.6.pdf -#define MX25L3233F {\ - .total_size = (1 << 22), /* 4 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xc2, \ - .memory_type = 0x20, \ - .capacity = 0x16, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x40, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = true, \ +#define MX25L3233F { \ + .total_size = (1 << 22), /* 4 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xc2, \ + .memory_type = 0x20, \ + .capacity = 0x16, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x40, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = true, \ } // Settings for the Macronix MX25R6435F 8MiB SPI flash. // Datasheet: http://www.macronix.com/Lists/Datasheet/Attachments/7428/MX25R6435F,%20Wide%20Range,%2064Mb,%20v1.4.pdf // By default its in lower power mode which can only do 8mhz. In high power mode it can do 80mhz. -#define MX25R6435F {\ - .total_size = (1 << 23), /* 8 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xc2, \ - .memory_type = 0x28, \ - .capacity = 0x17, \ - .max_clock_speed_mhz = 8, \ - .quad_enable_bit_mask = 0x40, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = true, \ +#define MX25R6435F { \ + .total_size = (1 << 23), /* 8 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xc2, \ + .memory_type = 0x28, \ + .capacity = 0x17, \ + .max_clock_speed_mhz = 8, \ + .quad_enable_bit_mask = 0x40, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = true, \ } // Settings for the Macronix MX25R1635F 8MiB SPI flash. // Datasheet: https://www.macronix.com/Lists/Datasheet/Attachments/7595/MX25R1635F,%20Wide%20Range,%2016Mb,%20v1.6.pdf // In low power mode, quad operations can only run at 8 MHz. -#define MX25R1635F {\ - .total_size = (1 << 21), /* 2 MiB */ \ - .start_up_time_us = 800, \ - .manufacturer_id = 0xc2, \ - .memory_type = 0x28, \ - .capacity = 0x15, \ - .max_clock_speed_mhz = 33, /* 8 mhz for dual/quad */ \ - .quad_enable_bit_mask = 0x80, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = true, \ +#define MX25R1635F { \ + .total_size = (1 << 21), /* 2 MiB */ \ + .start_up_time_us = 800, \ + .manufacturer_id = 0xc2, \ + .memory_type = 0x28, \ + .capacity = 0x15, \ + .max_clock_speed_mhz = 33, /* 8 mhz for dual/quad */ \ + .quad_enable_bit_mask = 0x80, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = true, \ } // Settings for the Macronix MX25L51245G 64MiB SPI flash. // Datasheet: https://www.macronix.com/Lists/Datasheet/Attachments/7437/MX25L51245G,%203V,%20512Mb,%20v1.6.pdf -#define MX25L51245G {\ - .total_size = (1 << 26), /* 64 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xc2, \ - .memory_type = 0x20, \ - .capacity = 0x1a, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x40, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = true, \ +#define MX25L51245G { \ + .total_size = (1 << 26), /* 64 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xc2, \ + .memory_type = 0x20, \ + .capacity = 0x1a, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x40, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = true, \ } // Settings for the Macronix MX25L51245G 64MiB SPI flash. // Datasheet: https://www.macronix.com/Lists/Datasheet/Attachments/7437/MX25L51245G,%203V,%20512Mb,%20v1.6.pdf -#define MX25L25645G {\ - .total_size = (1 << 25), /* 32 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0x9f, \ - .memory_type = 0xab, \ - .capacity = 0x90, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0xaf, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = true, \ +#define MX25L25645G { \ + .total_size = (1 << 25), /* 32 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0x9f, \ + .memory_type = 0xab, \ + .capacity = 0x90, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0xaf, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = true, \ } // Settings for the Macronix MX25L12833F 16MiB SPI flash // Datasheet: https://www.macronix.com/Lists/Datasheet/Attachments/7447/MX25L12833F,%203V,%20128Mb,%20v1.0.pdf -#define MX25L12833F {\ - .total_size = (1UL << 24), /* 16 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xc2, \ - .memory_type = 0x20, \ - .capacity = 0x18, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x40, \ - .has_sector_protection = true, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = true, \ - } +#define MX25L12833F { \ + .total_size = (1UL << 24), /* 16 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xc2, \ + .memory_type = 0x20, \ + .capacity = 0x18, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x40, \ + .has_sector_protection = true, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = true, \ +} // Settings for the Winbond W25Q128JV-PM 16MiB SPI flash. Note that JV-IM has a different .memory_type (0x70) // Datasheet: https://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf -#define W25Q128JV_PM {\ - .total_size = (1 << 24), /* 16 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x70, \ - .capacity = 0x18, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ +#define W25Q128JV_PM { \ + .total_size = (1 << 24), /* 16 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x70, \ + .capacity = 0x18, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ } // Settings for the Winbond W25Q32FV 4MiB SPI flash. // Datasheet:http://www.winbond.com/resource-files/w25q32fv%20revj%2006032016.pdf?__locale=en -#define W25Q32FV {\ - .total_size = (1 << 22), /* 4 MiB */ \ - .start_up_time_us = 5000, \ - .manufacturer_id = 0xef, \ - .memory_type = 0x40, \ - .capacity = 0x16, \ - .max_clock_speed_mhz = 104, \ - .quad_enable_bit_mask = 0x00, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = false, \ - .supports_qspi_writes = false, \ - .write_status_register_split = false, \ - .single_status_byte = false, \ +#define W25Q32FV { \ + .total_size = (1 << 22), /* 4 MiB */ \ + .start_up_time_us = 5000, \ + .manufacturer_id = 0xef, \ + .memory_type = 0x40, \ + .capacity = 0x16, \ + .max_clock_speed_mhz = 104, \ + .quad_enable_bit_mask = 0x00, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = false, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = false, \ } // Settings for the ISSI IS25LP128F 16MiB SPI flash. // Datasheet: http://www.issi.com/WW/pdf/25LP-WP128F.pdf -#define IS25LP128F {\ - .total_size = (1 << 24), /* 16 MiB */ \ - .start_up_time_us = 10000, \ - .manufacturer_id = 0x9d, \ - .memory_type = 0x60, \ - .capacity = 0x18, \ - .max_clock_speed_mhz = 133, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = true, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = true, \ +#define IS25LP128F { \ + .total_size = (1 << 24), /* 16 MiB */ \ + .start_up_time_us = 10000, \ + .manufacturer_id = 0x9d, \ + .memory_type = 0x60, \ + .capacity = 0x18, \ + .max_clock_speed_mhz = 133, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = true, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = true, \ } // Settings for the Micron N25Q256A 256Mb (32MiB) QSPI flash. // Datasheet: https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_256mb_3v.pdf -#define N25Q256A {\ - /* .total_size = (1 << 25), 32 MiB does not work at this time, as assumptions about 3-byte addresses abound */ \ - .total_size = (1 << 24), /* 16 MiB */ \ - .start_up_time_us = 10000, \ - .manufacturer_id = 0x20, \ - .memory_type = 0xBA, \ - .capacity = 0x19, \ - .max_clock_speed_mhz = 108, \ - .quad_enable_bit_mask = 0x02, \ - .has_sector_protection = false, \ - .supports_fast_read = true, \ - .supports_qspi = true, \ - .supports_qspi_writes = true, \ - .write_status_register_split = false, \ - .single_status_byte = true, \ +#define N25Q256A { \ + /* .total_size = (1 << 25), 32 MiB does not work at this time, as assumptions about 3-byte addresses abound */ \ + .total_size = (1 << 24), /* 16 MiB */ \ + .start_up_time_us = 10000, \ + .manufacturer_id = 0x20, \ + .memory_type = 0xBA, \ + .capacity = 0x19, \ + .max_clock_speed_mhz = 108, \ + .quad_enable_bit_mask = 0x02, \ + .has_sector_protection = false, \ + .supports_fast_read = true, \ + .supports_qspi = true, \ + .supports_qspi_writes = true, \ + .write_status_register_split = false, \ + .single_status_byte = true, \ } #endif // MICROPY_INCLUDED_ATMEL_SAMD_EXTERNAL_FLASH_DEVICES_H |