From a18b991ca90670758afadfe0e78ec97cf56bf5e3 Mon Sep 17 00:00:00 2001 From: dherrada Date: Wed, 22 Apr 2020 15:22:34 -0400 Subject: Added pyi to SPI.c --- shared-bindings/busio/SPI.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/shared-bindings/busio/SPI.c b/shared-bindings/busio/SPI.c index 043c1089d..e01e9e35e 100644 --- a/shared-bindings/busio/SPI.c +++ b/shared-bindings/busio/SPI.c @@ -40,6 +40,19 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" +class SPI: + def __init__(self, clock: microcontroller.Pin, MOSI: microcontroller.Pin = None, MISO: microcontroller.Pin = None): ... + def deinit(self, ) -> Any: ... + def __enter__(self, ) -> Any: ... + def __exit__(self, ) -> Any: ... + def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: ... + def try_lock(self, ) -> Any: ... + def unlock(self, ) -> Any: ... + def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any: ... + def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any: ... + def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: ... + frequency: Any = ... + //| .. currentmodule:: busio //| //| :class:`SPI` -- a 3-4 wire serial protocol -- cgit v1.2.3 From 855c2033b59c8451bde30387e668ecfb206888b6 Mon Sep 17 00:00:00 2001 From: dherrada Date: Thu, 23 Apr 2020 15:35:20 -0400 Subject: Reogranized pyi in spi.c --- shared-bindings/busio/SPI.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/shared-bindings/busio/SPI.c b/shared-bindings/busio/SPI.c index e01e9e35e..db84ac97b 100644 --- a/shared-bindings/busio/SPI.c +++ b/shared-bindings/busio/SPI.c @@ -40,18 +40,6 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" -class SPI: - def __init__(self, clock: microcontroller.Pin, MOSI: microcontroller.Pin = None, MISO: microcontroller.Pin = None): ... - def deinit(self, ) -> Any: ... - def __enter__(self, ) -> Any: ... - def __exit__(self, ) -> Any: ... - def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: ... - def try_lock(self, ) -> Any: ... - def unlock(self, ) -> Any: ... - def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any: ... - def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any: ... - def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: ... - frequency: Any = ... //| .. currentmodule:: busio //| @@ -89,6 +77,8 @@ class SPI: //| :param ~microcontroller.Pin MOSI: the Master Out Slave In pin. //| :param ~microcontroller.Pin MISO: the Master In Slave Out pin. //| +// class SPI: +// def __init__(self, clock: microcontroller.Pin, MOSI: microcontroller.Pin = None, MISO: microcontroller.Pin = None): ... // TODO(tannewt): Support LSB SPI. STATIC mp_obj_t busio_spi_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { @@ -115,6 +105,7 @@ STATIC mp_obj_t busio_spi_make_new(const mp_obj_type_t *type, size_t n_args, con //| //| Turn off the SPI bus. //| +// def deinit(self, ) -> Any: ... STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_spi_deinit(self); @@ -127,12 +118,14 @@ MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_deinit_obj, busio_spi_obj_deinit); //| No-op used by Context Managers. //| // Provided by context manager helper. +// def __enter__(self, ) -> Any: ... //| .. method:: __exit__() //| //| Automatically deinitializes the hardware when exiting a context. See //| :ref:`lifetime-and-contextmanagers` for more info. //| +// def __exit__(self, ) -> Any: ... STATIC mp_obj_t busio_spi_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_spi_deinit(args[0]); @@ -176,6 +169,7 @@ STATIC void check_for_deinit(busio_spi_obj_t *self) { //| Two SPI objects may be created, except on the Circuit Playground Bluefruit, //| which allows only one (to allow for an additional I2C object). //| +// def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: ... STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_baudrate, ARG_polarity, ARG_phase, ARG_bits }; static const mp_arg_t allowed_args[] = { @@ -218,6 +212,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_configure_obj, 1, busio_spi_configure); //| :return: True when lock has been grabbed //| :rtype: bool //| +// def try_lock(self, ) -> Any: ... STATIC mp_obj_t busio_spi_obj_try_lock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); return mp_obj_new_bool(common_hal_busio_spi_try_lock(self)); @@ -228,6 +223,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_try_lock_obj, busio_spi_obj_try_lock); //| //| Releases the SPI lock. //| +// def unlock(self, ) -> Any: ... STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -245,6 +241,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_unlock_obj, busio_spi_obj_unlock); //| :param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]`` //| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` //| +// def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any: ... STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end }; static const mp_arg_t allowed_args[] = { @@ -288,6 +285,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_obj, 2, busio_spi_write); //| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` //| :param int write_value: Value to write while reading. (Usually ignored.) //| +// def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any: ... STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end, ARG_write_value }; static const mp_arg_t allowed_args[] = { @@ -335,6 +333,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_readinto_obj, 2, busio_spi_readinto); //| :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` //| :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)`` //| +// def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: ... STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer_out, ARG_buffer_in, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; static const mp_arg_t allowed_args[] = { @@ -387,6 +386,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_readinto_obj, 2, busio_spi_write_read //| The actual SPI bus frequency. This may not match the frequency requested //| due to internal limitations. //| +// frequency: Any = ... STATIC mp_obj_t busio_spi_obj_get_frequency(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); -- cgit v1.2.3 From 55bdee688fc021d8afb70b0868b20699c5f0519b Mon Sep 17 00:00:00 2001 From: dherrada Date: Thu, 23 Apr 2020 16:14:17 -0400 Subject: Reorganized pyi again --- shared-bindings/busio/SPI.c | 237 +++++++++++++++++++++----------------------- 1 file changed, 112 insertions(+), 125 deletions(-) diff --git a/shared-bindings/busio/SPI.c b/shared-bindings/busio/SPI.c index db84ac97b..1ac9629f8 100644 --- a/shared-bindings/busio/SPI.c +++ b/shared-bindings/busio/SPI.c @@ -41,44 +41,44 @@ #include "supervisor/shared/translate.h" -//| .. currentmodule:: busio +//|class SPI: +//| """.. currentmodule:: busio //| -//| :class:`SPI` -- a 3-4 wire serial protocol -//| ----------------------------------------------- +//| `SPI` -- a 3-4 wire serial protocol +//| ----------------------------------------------- //| -//| SPI is a serial protocol that has exclusive pins for data in and out of the -//| master. It is typically faster than :py:class:`~busio.I2C` because a -//| separate pin is used to control the active slave rather than a transitted -//| address. This class only manages three of the four SPI lines: `!clock`, -//| `!MOSI`, `!MISO`. Its up to the client to manage the appropriate slave -//| select line. (This is common because multiple slaves can share the `!clock`, -//| `!MOSI` and `!MISO` lines and therefore the hardware.) +//| SPI is a serial protocol that has exclusive pins for data in and out of the +//| master. It is typically faster than :py:class:`~busio.I2C` because a +//| separate pin is used to control the active slave rather than a transitted +//| address. This class only manages three of the four SPI lines: `!clock`, +//| `!MOSI`, `!MISO`. Its up to the client to manage the appropriate slave +//| select line. (This is common because multiple slaves can share the `!clock`, +//| `!MOSI` and `!MISO` lines and therefore the hardware.)""" //| -//| .. class:: SPI(clock, MOSI=None, MISO=None) +//| def __init__(self, clock: microcontroller.Pin, MOSI: microcontroller.Pin = None, MISO: microcontroller.Pin = None): //| -//| Construct an SPI object on the given pins. +//| """Construct an SPI object on the given pins. //| -//| ..note:: The SPI peripherals allocated in order of desirability, if possible, -//| such as highest speed and not shared use first. For instance, on the nRF52840, -//| there is a single 32MHz SPI peripheral, and multiple 8MHz peripherals, -//| some of which may also be used for I2C. The 32MHz SPI peripheral is returned -//| first, then the exclusive 8MHz SPI peripheral, and finally the shared 8MHz -//| peripherals. +//| ..note:: The SPI peripherals allocated in order of desirability, if possible, +//| such as highest speed and not shared use first. For instance, on the nRF52840, +//| there is a single 32MHz SPI peripheral, and multiple 8MHz peripherals, +//| some of which may also be used for I2C. The 32MHz SPI peripheral is returned +//| first, then the exclusive 8MHz SPI peripheral, and finally the shared 8MHz +//| peripherals. //| -//| .. seealso:: Using this class directly requires careful lock management. -//| Instead, use :class:`~adafruit_bus_device.spi_device.SPIDevice` to -//| manage locks. +//| .. seealso:: Using this class directly requires careful lock management. +//| Instead, use :class:`~adafruit_bus_device.spi_device.SPIDevice` to +//| manage locks. //| -//| .. seealso:: Using this class to directly read registers requires manual -//| bit unpacking. Instead, use an existing driver or make one with -//| :ref:`Register ` data descriptors. +//| .. seealso:: Using this class to directly read registers requires manual +//| bit unpacking. Instead, use an existing driver or make one with +//| :ref:`Register ` data descriptors. //| -//| :param ~microcontroller.Pin clock: the pin to use for the clock. -//| :param ~microcontroller.Pin MOSI: the Master Out Slave In pin. -//| :param ~microcontroller.Pin MISO: the Master In Slave Out pin. -//| -// class SPI: -// def __init__(self, clock: microcontroller.Pin, MOSI: microcontroller.Pin = None, MISO: microcontroller.Pin = None): ... +//| :param ~microcontroller.Pin clock: the pin to use for the clock. +//| :param ~microcontroller.Pin MOSI: the Master Out Slave In pin. +//| :param ~microcontroller.Pin MISO: the Master In Slave Out pin.""" +//| ... + // TODO(tannewt): Support LSB SPI. STATIC mp_obj_t busio_spi_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { @@ -101,11 +101,9 @@ STATIC mp_obj_t busio_spi_make_new(const mp_obj_type_t *type, size_t n_args, con return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Turn off the SPI bus. -//| -// def deinit(self, ) -> Any: ... +//| def deinit(self, ) -> Any: +//| """Turn off the SPI bus.""" +//| ... STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_spi_deinit(self); @@ -113,19 +111,15 @@ STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_deinit_obj, busio_spi_obj_deinit); -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| -// Provided by context manager helper. -// def __enter__(self, ) -> Any: ... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers. +//| Provided by context manager helper.""" +//| ... -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| -// def __exit__(self, ) -> Any: ... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_spi_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_spi_deinit(args[0]); @@ -146,30 +140,29 @@ STATIC void check_for_deinit(busio_spi_obj_t *self) { } } -//| .. method:: configure(*, baudrate=100000, polarity=0, phase=0, bits=8) -//| -//| Configures the SPI bus. The SPI object must be locked. -//| -//| :param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower -//| due to the granularity of available clock settings. -//| Check the `frequency` attribute for the actual clock rate. -//| :param int polarity: the base state of the clock line (0 or 1) -//| :param int phase: the edge of the clock that data is captured. First (0) -//| or second (1). Rising or falling depends on clock polarity. -//| :param int bits: the number of bits per word -//| -//| .. note:: On the SAMD21, it is possible to set the baudrate to 24 MHz, but that -//| speed is not guaranteed to work. 12 MHz is the next available lower speed, and is -//| within spec for the SAMD21. -//| -//| .. note:: On the nRF52840, these baudrates are available: 125kHz, 250kHz, 1MHz, 2MHz, 4MHz, -//| and 8MHz. -//| If you pick a a baudrate other than one of these, the nearest lower -//| baudrate will be chosen, with a minimum of 125kHz. -//| Two SPI objects may be created, except on the Circuit Playground Bluefruit, -//| which allows only one (to allow for an additional I2C object). -//| -// def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: ... +//| def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: +//| """Configures the SPI bus. The SPI object must be locked. +//| +//| :param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower +//| due to the granularity of available clock settings. +//| Check the `frequency` attribute for the actual clock rate. +//| :param int polarity: the base state of the clock line (0 or 1) +//| :param int phase: the edge of the clock that data is captured. First (0) +//| or second (1). Rising or falling depends on clock polarity. +//| :param int bits: the number of bits per word +//| +//| .. note:: On the SAMD21, it is possible to set the baudrate to 24 MHz, but that +//| speed is not guaranteed to work. 12 MHz is the next available lower speed, and is +//| within spec for the SAMD21. +//| +//| .. note:: On the nRF52840, these baudrates are available: 125kHz, 250kHz, 1MHz, 2MHz, 4MHz, +//| and 8MHz. +//| If you pick a a baudrate other than one of these, the nearest lower +//| baudrate will be chosen, with a minimum of 125kHz. +//| Two SPI objects may be created, except on the Circuit Playground Bluefruit, +//| which allows only one (to allow for an additional I2C object).""" +//| ... + STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_baudrate, ARG_polarity, ARG_phase, ARG_bits }; static const mp_arg_t allowed_args[] = { @@ -205,25 +198,23 @@ STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_ } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_configure_obj, 1, busio_spi_configure); -//| .. method:: try_lock() -//| -//| Attempts to grab the SPI lock. Returns True on success. +//| def try_lock(self, ) -> Any: +//| """Attempts to grab the SPI lock. Returns True on success. //| -//| :return: True when lock has been grabbed -//| :rtype: bool -//| -// def try_lock(self, ) -> Any: ... +//| :return: True when lock has been grabbed +//| :rtype: bool""" +//| ... + STATIC mp_obj_t busio_spi_obj_try_lock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); return mp_obj_new_bool(common_hal_busio_spi_try_lock(self)); } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_try_lock_obj, busio_spi_obj_try_lock); -//| .. method:: unlock() -//| -//| Releases the SPI lock. -//| -// def unlock(self, ) -> Any: ... +//| def unlock(self, ) -> Any: +//| """Releases the SPI lock.""" +//| ... + STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -232,16 +223,15 @@ STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_unlock_obj, busio_spi_obj_unlock); -//| .. method:: write(buffer, *, start=0, end=None) -//| -//| Write the data contained in ``buffer``. The SPI object must be locked. -//| If the buffer is empty, nothing happens. +//| def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any: ... +//| """Write the data contained in ``buffer``. The SPI object must be locked. +//| If the buffer is empty, nothing happens. //| -//| :param bytearray buffer: Write out the data in this buffer -//| :param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]`` -//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` -//| -// def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any: ... +//| :param bytearray buffer: Write out the data in this buffer +//| :param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]`` +//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``""" +//| ... + STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end }; static const mp_arg_t allowed_args[] = { @@ -274,18 +264,17 @@ STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_ MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_obj, 2, busio_spi_write); -//| .. method:: readinto(buffer, *, start=0, end=None, write_value=0) -//| -//| Read into ``buffer`` while writing ``write_value`` for each byte read. -//| The SPI object must be locked. -//| If the number of bytes to read is 0, nothing happens. -//| -//| :param bytearray buffer: Read data into this buffer -//| :param int start: Start of the slice of ``buffer`` to read into: ``buffer[start:end]`` -//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` -//| :param int write_value: Value to write while reading. (Usually ignored.) +//| def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any: +//| """Read into ``buffer`` while writing ``write_value`` for each byte read. +//| The SPI object must be locked. +//| If the number of bytes to read is 0, nothing happens. //| -// def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any: ... +//| :param bytearray buffer: Read data into this buffer +//| :param int start: Start of the slice of ``buffer`` to read into: ``buffer[start:end]`` +//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` +//| :param int write_value: Value to write while reading. (Usually ignored.)""" +//| ... + STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end, ARG_write_value }; static const mp_arg_t allowed_args[] = { @@ -318,22 +307,21 @@ STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_m } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_readinto_obj, 2, busio_spi_readinto); -//| .. method:: write_readinto(buffer_out, buffer_in, *, out_start=0, out_end=None, in_start=0, in_end=None) -//| -//| Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``. -//| The SPI object must be locked. -//| The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]`` -//| must be equal. -//| If buffer slice lengths are both 0, nothing happens. -//| -//| :param bytearray buffer_out: Write out the data in this buffer -//| :param bytearray buffer_in: Read data into this buffer -//| :param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]`` -//| :param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)`` -//| :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` -//| :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)`` -//| -// def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: ... +//| def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: +//| """Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``. +//| The SPI object must be locked. +//| The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]`` +//| must be equal. +//| If buffer slice lengths are both 0, nothing happens. +//| +//| :param bytearray buffer_out: Write out the data in this buffer +//| :param bytearray buffer_in: Read data into this buffer +//| :param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]`` +//| :param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)`` +//| :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` +//| :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``""" +//| ... + STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer_out, ARG_buffer_in, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; static const mp_arg_t allowed_args[] = { @@ -381,12 +369,11 @@ STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_readinto_obj, 2, busio_spi_write_readinto); -//| .. attribute:: frequency -//| -//| The actual SPI bus frequency. This may not match the frequency requested -//| due to internal limitations. -//| -// frequency: Any = ... +//| frequency: Any = +//| """The actual SPI bus frequency. This may not match the frequency requested +//| due to internal limitations.""" +//| ... + STATIC mp_obj_t busio_spi_obj_get_frequency(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); -- cgit v1.2.3 From 28430a9919c511330c4fb833469497a346ad2288 Mon Sep 17 00:00:00 2001 From: dherrada Date: Sat, 25 Apr 2020 15:07:58 -0400 Subject: Added inline pyi to I2C.c --- shared-bindings/busio/I2C.c | 211 +++++++++++++++++++++----------------------- 1 file changed, 100 insertions(+), 111 deletions(-) diff --git a/shared-bindings/busio/I2C.c b/shared-bindings/busio/I2C.c index c89215acd..0cd392f9a 100644 --- a/shared-bindings/busio/I2C.c +++ b/shared-bindings/busio/I2C.c @@ -36,34 +36,33 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: busio -//| -//| :class:`I2C` --- Two wire serial protocol -//| ------------------------------------------ -//| -//| .. class:: I2C(scl, sda, *, frequency=400000, timeout=255) -//| -//| I2C is a two-wire protocol for communicating between devices. At the -//| physical level it consists of 2 wires: SCL and SDA, the clock and data -//| lines respectively. -//| -//| .. seealso:: Using this class directly requires careful lock management. -//| Instead, use :class:`~adafruit_bus_device.i2c_device.I2CDevice` to -//| manage locks. -//| -//| .. seealso:: Using this class to directly read registers requires manual -//| bit unpacking. Instead, use an existing driver or make one with -//| :ref:`Register ` data descriptors. -//| -//| :param ~microcontroller.Pin scl: The clock pin -//| :param ~microcontroller.Pin sda: The data pin -//| :param int frequency: The clock frequency in Hertz -//| :param int timeout: The maximum clock stretching timeut - (used only for bitbangio.I2C; ignored for busio.I2C) -//| -//| .. note:: On the nRF52840, only one I2C object may be created, -//| except on the Circuit Playground Bluefruit, which allows two, -//| one for the onboard accelerometer, and one for offboard use. -//| +//|class I2C: +//| """.. currentmodule:: busio +//| +//| :class:`I2C` --- Two wire serial protocol +//| ------------------------------------------""" +//| def __init__(self, scl: microcontroller.Pin, sda: microcontroller.Pin, *, frequency: int = 400000, timeout: int = 255): +//| """I2C is a two-wire protocol for communicating between devices. At the +//| physical level it consists of 2 wires: SCL and SDA, the clock and data +//| lines respectively. +//| +//| .. seealso:: Using this class directly requires careful lock management. +//| Instead, use :class:`~adafruit_bus_device.i2c_device.I2CDevice` to +//| manage locks. +//| +//| .. seealso:: Using this class to directly read registers requires manual +//| bit unpacking. Instead, use an existing driver or make one with +//| :ref:`Register ` data descriptors. +//| +//| :param ~microcontroller.Pin scl: The clock pin +//| :param ~microcontroller.Pin sda: The data pin +//| :param int frequency: The clock frequency in Hertz +//| :param int timeout: The maximum clock stretching timeut - (used only for bitbangio.I2C; ignored for busio.I2C) +//| +//| .. note:: On the nRF52840, only one I2C object may be created, +//| except on the Circuit Playground Bluefruit, which allows two, +//| one for the onboard accelerometer, and one for offboard use.""" +//| ... STATIC mp_obj_t busio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { busio_i2c_obj_t *self = m_new_obj(busio_i2c_obj_t); self->base.type = &busio_i2c_type; @@ -84,10 +83,9 @@ STATIC mp_obj_t busio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, con return (mp_obj_t)self; } -//| .. method:: deinit() -//| -//| Releases control of the underlying hardware so other classes can use it. -//| +//| def deinit(self, ) -> Any: +//| """Releases control of the underlying hardware so other classes can use it.""" +//| ... STATIC mp_obj_t busio_i2c_obj_deinit(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_i2c_deinit(self); @@ -101,17 +99,15 @@ STATIC void check_for_deinit(busio_i2c_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used in Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used in Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware on context exit. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware on context exit. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_i2c_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_i2c_deinit(args[0]); @@ -126,14 +122,13 @@ static void check_lock(busio_i2c_obj_t *self) { } } -//| .. method:: scan() -//| -//| Scan all I2C addresses between 0x08 and 0x77 inclusive and return a -//| list of those that respond. -//| -//| :return: List of device ids on the I2C bus -//| :rtype: list +//| def scan(self, ) -> Any: +//| """Scan all I2C addresses between 0x08 and 0x77 inclusive and return a +//| list of those that respond. //| +//| :return: List of device ids on the I2C bus +//| :rtype: list""" +//| ... STATIC mp_obj_t busio_i2c_scan(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -150,13 +145,11 @@ STATIC mp_obj_t busio_i2c_scan(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_scan_obj, busio_i2c_scan); -//| .. method:: try_lock() -//| -//| Attempts to grab the I2C lock. Returns True on success. -//| -//| :return: True when lock has been grabbed -//| :rtype: bool -//| +//| def try_lock(self, ) -> Any: +//| """Attempts to grab the I2C lock. Returns True on success. +//| :return: True when lock has been grabbed +//| :rtype: bool""" +//| ... STATIC mp_obj_t busio_i2c_obj_try_lock(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -164,10 +157,9 @@ STATIC mp_obj_t busio_i2c_obj_try_lock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_try_lock_obj, busio_i2c_obj_try_lock); -//| .. method:: unlock() -//| -//| Releases the I2C lock. -//| +//| def unlock(self, ) -> Any: +//| """Releases the I2C lock.""" +//| ... STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -176,21 +168,20 @@ STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_unlock_obj, busio_i2c_obj_unlock); -//| .. method:: readfrom_into(address, buffer, *, start=0, end=None) -//| -//| Read into ``buffer`` from the slave specified by ``address``. -//| The number of bytes read will be the length of ``buffer``. -//| At least one byte must be read. +//| def readfrom_into(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None) -> Any: +//| """Read into ``buffer`` from the slave specified by ``address``. +//| The number of bytes read will be the length of ``buffer``. +//| At least one byte must be read. //| -//| If ``start`` or ``end`` is provided, then the buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like -//| ``buf[start:end]`` will so it saves memory. -//| -//| :param int address: 7-bit device address -//| :param bytearray buffer: buffer to write into -//| :param int start: Index to start writing at -//| :param int end: Index to write up to but not include. Defaults to ``len(buffer)`` +//| If ``start`` or ``end`` is provided, then the buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like +//| ``buf[start:end]`` will so it saves memory. //| +//| :param int address: 7-bit device address +//| :param bytearray buffer: buffer to write into +//| :param int start: Index to start writing at +//| :param int end: Index to write up to but not include. Defaults to ``len(buffer)``""" +//| ... // Shared arg parsing for readfrom_into and writeto_then_readfrom. STATIC void readfrom(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end) { mp_buffer_info_t bufinfo; @@ -228,27 +219,26 @@ STATIC mp_obj_t busio_i2c_readfrom_into(size_t n_args, const mp_obj_t *pos_args, } MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_readfrom_into_obj, 3, busio_i2c_readfrom_into); -//| .. method:: writeto(address, buffer, *, start=0, end=None, stop=True) -//| -//| Write the bytes from ``buffer`` to the slave specified by ``address``. -//| Transmits a stop bit when stop is True. Setting stop=False is deprecated and stop will be -//| removed in CircuitPython 6.x. Use `writeto_then_readfrom` when needing a write, no stop and -//| repeated start before a read. -//| -//| If ``start`` or ``end`` is provided, then the buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like -//| ``buffer[start:end]`` will so it saves memory. -//| -//| Writing a buffer or slice of length zero is permitted, as it can be used -//| to poll for the existence of a device. -//| -//| :param int address: 7-bit device address -//| :param bytearray buffer: buffer containing the bytes to write -//| :param int start: Index to start writing from -//| :param int end: Index to read up to but not include. Defaults to ``len(buffer)`` -//| :param bool stop: If true, output an I2C stop condition after the buffer is written. -//| Deprecated. Will be removed in 6.x and act as stop=True. -//| +//| def writeto(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None, stop: bool = True) -> Any: +//| """Write the bytes from ``buffer`` to the slave specified by ``address``. +//| Transmits a stop bit when stop is True. Setting stop=False is deprecated and stop will be +//| removed in CircuitPython 6.x. Use `writeto_then_readfrom` when needing a write, no stop and +//| repeated start before a read. +//| +//| If ``start`` or ``end`` is provided, then the buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like +//| ``buffer[start:end]`` will so it saves memory. +//| +//| Writing a buffer or slice of length zero is permitted, as it can be used +//| to poll for the existence of a device. +//| +//| :param int address: 7-bit device address +//| :param bytearray buffer: buffer containing the bytes to write +//| :param int start: Index to start writing from +//| :param int end: Index to read up to but not include. Defaults to ``len(buffer)`` +//| :param bool stop: If true, output an I2C stop condition after the buffer is written. +//| Deprecated. Will be removed in 6.x and act as stop=True.""" +//| ... // Shared arg parsing for writeto and writeto_then_readfrom. STATIC void writeto(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end, bool stop) { // get the buffer to write the data from @@ -287,24 +277,23 @@ STATIC mp_obj_t busio_i2c_writeto(size_t n_args, const mp_obj_t *pos_args, mp_ma } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_writeto_obj, 1, busio_i2c_writeto); -//| .. method:: writeto_then_readfrom(address, out_buffer, in_buffer, *, out_start=0, out_end=None, in_start=0, in_end=None) -//| -//| Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop -//| bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and -//| ``in_buffer`` can be the same buffer because they are used sequentially. -//| -//| If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]`` -//| will so it saves memory. -//| -//| :param int address: 7-bit device address -//| :param bytearray out_buffer: buffer containing the bytes to write -//| :param bytearray in_buffer: buffer to write into -//| :param int out_start: Index to start writing from -//| :param int out_end: Index to read up to but not include. Defaults to ``len(buffer)`` -//| :param int in_start: Index to start writing at -//| :param int in_end: Index to write up to but not include. Defaults to ``len(buffer)`` -//| +//| def writeto_then_readfrom(self, address: int, out_buffer: bytearray, in_buffer: bytearray, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> Any: +//| """Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop +//| bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and +//| ``in_buffer`` can be the same buffer because they are used sequentially. +//| +//| If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]`` +//| will so it saves memory. +//| +//| :param int address: 7-bit device address +//| :param bytearray out_buffer: buffer containing the bytes to write +//| :param bytearray in_buffer: buffer to write into +//| :param int out_start: Index to start writing from +//| :param int out_end: Index to read up to but not include. Defaults to ``len(buffer)`` +//| :param int in_start: Index to start writing at +//| :param int in_end: Index to write up to but not include. Defaults to ``len(buffer)``""" +//| ... STATIC mp_obj_t busio_i2c_writeto_then_readfrom(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_address, ARG_out_buffer, ARG_in_buffer, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; static const mp_arg_t allowed_args[] = { -- cgit v1.2.3 From 7070fe1995f70e745699682bbc9776bb54a069a6 Mon Sep 17 00:00:00 2001 From: dherrada Date: Sat, 25 Apr 2020 15:25:31 -0400 Subject: Added inline pyi to UART.c --- shared-bindings/busio/UART.c | 181 +++++++++++++++++++++---------------------- 1 file changed, 88 insertions(+), 93 deletions(-) diff --git a/shared-bindings/busio/UART.c b/shared-bindings/busio/UART.c index f231924d5..59c95528d 100644 --- a/shared-bindings/busio/UART.c +++ b/shared-bindings/busio/UART.c @@ -40,33 +40,32 @@ #include "supervisor/shared/translate.h" -//| .. currentmodule:: busio -//| -//| :class:`UART` -- a bidirectional serial protocol -//| ================================================= -//| -//| -//| .. class:: UART(tx, rx, *, baudrate=9600, bits=8, parity=None, stop=1, timeout=1, receiver_buffer_size=64) -//| -//| A common bidirectional serial protocol that uses an an agreed upon speed -//| rather than a shared clock line. -//| -//| :param ~microcontroller.Pin tx: the pin to transmit with, or ``None`` if this ``UART`` is receive-only. -//| :param ~microcontroller.Pin rx: the pin to receive on, or ``None`` if this ``UART`` is transmit-only. -//| :param ~microcontroller.Pin rts: the pin for rts, or ``None`` if rts not in use. -//| :param ~microcontroller.Pin cts: the pin for cts, or ``None`` if cts not in use. -//| :param ~microcontroller.Pin rs485_dir: the pin for rs485 direction setting, or ``None`` if rs485 not in use. -//| :param bool rs485_invert: set to invert the sense of the rs485_dir pin. -//| :param int baudrate: the transmit and receive speed. -//| :param int bits: the number of bits per byte, 7, 8 or 9. -//| :param Parity parity: the parity used for error checking. -//| :param int stop: the number of stop bits, 1 or 2. -//| :param float timeout: the timeout in seconds to wait for the first character and between subsequent characters when reading. Raises ``ValueError`` if timeout >100 seconds. -//| :param int receiver_buffer_size: the character length of the read buffer (0 to disable). (When a character is 9 bits the buffer will be 2 * receiver_buffer_size bytes.) -//| -//| *New in CircuitPython 4.0:* ``timeout`` has incompatibly changed units from milliseconds to seconds. -//| The new upper limit on ``timeout`` is meant to catch mistaken use of milliseconds. -//| + +//|class UART: +//| """.. currentmodule:: busio +//| +//| :class:`UART` -- a bidirectional serial protocol +//| =================================================""" +//| def __init__(self, tx: microcontroller.Pin, rx: microcontroller.Pin, *, baudrate: int = 9600, bits: int = 8, parity: Parity = None, stop: int = 1, timeout: float = 1, receiver_buffer_size: int = 64): +//| """A common bidirectional serial protocol that uses an an agreed upon speed +//| rather than a shared clock line. +//| +//| :param ~microcontroller.Pin tx: the pin to transmit with, or ``None`` if this ``UART`` is receive-only. +//| :param ~microcontroller.Pin rx: the pin to receive on, or ``None`` if this ``UART`` is transmit-only. +//| :param ~microcontroller.Pin rts: the pin for rts, or ``None`` if rts not in use. +//| :param ~microcontroller.Pin cts: the pin for cts, or ``None`` if cts not in use. +//| :param ~microcontroller.Pin rs485_dir: the pin for rs485 direction setting, or ``None`` if rs485 not in use. +//| :param bool rs485_invert: set to invert the sense of the rs485_dir pin. +//| :param int baudrate: the transmit and receive speed. +//| :param int bits: the number of bits per byte, 7, 8 or 9. +//| :param Parity parity: the parity used for error checking. +//| :param int stop: the number of stop bits, 1 or 2. +//| :param float timeout: the timeout in seconds to wait for the first character and between subsequent characters when reading. Raises ``ValueError`` if timeout >100 seconds. +//| :param int receiver_buffer_size: the character length of the read buffer (0 to disable). (When a character is 9 bits the buffer will be 2 * receiver_buffer_size bytes.) +//| +//| *New in CircuitPython 4.0:* ``timeout`` has incompatibly changed units from milliseconds to seconds. +//| The new upper limit on ``timeout`` is meant to catch mistaken use of milliseconds.""" +//| ... typedef struct { mp_obj_base_t base; } busio_uart_parity_obj_t; @@ -144,10 +143,9 @@ STATIC mp_obj_t busio_uart_make_new(const mp_obj_type_t *type, size_t n_args, co return (mp_obj_t)self; } -//| .. method:: deinit() -//| -//| Deinitialises the UART and releases any hardware resources for reuse. -//| +//| def deinit(self, ) -> Any: +//| """Deinitialises the UART and releases any hardware resources for reuse.""" +//| ... STATIC mp_obj_t busio_uart_obj_deinit(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_uart_deinit(self); @@ -161,17 +159,15 @@ STATIC void check_for_deinit(busio_uart_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_uart_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_uart_deinit(args[0]); @@ -181,41 +177,46 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_ // These are standard stream methods. Code is in py/stream.c. // -//| .. method:: read(nbytes=None) -//| -//| Read characters. If ``nbytes`` is specified then read at most that many -//| bytes. Otherwise, read everything that arrives until the connection -//| times out. Providing the number of bytes expected is highly recommended -//| because it will be faster. +//| def read(self, nbytes: Any = None) -> Any: +//| """Read characters. If ``nbytes`` is specified then read at most that many +//| bytes. Otherwise, read everything that arrives until the connection +//| times out. Providing the number of bytes expected is highly recommended +//| because it will be faster. //| -//| :return: Data read -//| :rtype: bytes or None -//| -//| .. method:: readinto(buf) +//| :return: Data read +//| :rtype: bytes or None""" +//| ... + +//| def readinto(self, buf: Any) -> Any: +//| """.. method:: readinto(buf) //| -//| Read bytes into the ``buf``. Read at most ``len(buf)`` bytes. +//| Read bytes into the ``buf``. Read at most ``len(buf)`` bytes. //| -//| :return: number of bytes read and stored into ``buf`` -//| :rtype: int or None (on a non-blocking error) +//| :return: number of bytes read and stored into ``buf`` +//| :rtype: int or None (on a non-blocking error) //| -//| *New in CircuitPython 4.0:* No length parameter is permitted. +//| *New in CircuitPython 4.0:* No length parameter is permitted.""" +//| ... -//| .. method:: readline() +//| def readline(self, ) -> Any: +//| """.. method:: readline() //| -//| Read a line, ending in a newline character. +//| Read a line, ending in a newline character. //| -//| :return: the line read -//| :rtype: int or None -//| -//| .. method:: write(buf) -//| -//| Write the buffer of bytes to the bus. +//| :return: the line read +//| :rtype: int or None""" +//| ... + +//| def write(self, buf: Any) -> Any: +//| """.. method:: write(buf) //| -//| *New in CircuitPython 4.0:* ``buf`` must be bytes, not a string. +//| Write the buffer of bytes to the bus. //| -//| :return: the number of bytes written -//| :rtype: int or None +//| *New in CircuitPython 4.0:* ``buf`` must be bytes, not a string. //| +//| :return: the number of bytes written +//| :rtype: int or None""" +//| ... // These three methods are used by the shared stream methods. STATIC mp_uint_t busio_uart_read(mp_obj_t self_in, void *buf_in, mp_uint_t size, int *errcode) { @@ -259,10 +260,9 @@ STATIC mp_uint_t busio_uart_ioctl(mp_obj_t self_in, mp_uint_t request, mp_uint_t return ret; } -//| .. attribute:: baudrate -//| -//| The current baudrate. -//| +//| baudrate: Any = +//| """The current baudrate.""" +//| ... STATIC mp_obj_t busio_uart_obj_get_baudrate(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -286,10 +286,9 @@ const mp_obj_property_t busio_uart_baudrate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: in_waiting -//| -//| The number of bytes in the input buffer, available to be read -//| +//| in_waiting: Any = +//| """The number of bytes in the input buffer, available to be read""" +//| ... STATIC mp_obj_t busio_uart_obj_get_in_waiting(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -304,10 +303,9 @@ const mp_obj_property_t busio_uart_in_waiting_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: timeout -//| -//| The current timeout, in seconds (float). -//| +//| timeout: Any = +//| """The current timeout, in seconds (float).""" +//| ... STATIC mp_obj_t busio_uart_obj_get_timeout(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -333,10 +331,9 @@ const mp_obj_property_t busio_uart_timeout_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: reset_input_buffer() -//| -//| Discard any unread characters in the input buffer. -//| +//| def reset_input_buffer(self, ) -> Any: +//| """Discard any unread characters in the input buffer.""" +//| ... STATIC mp_obj_t busio_uart_obj_reset_input_buffer(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -345,18 +342,16 @@ STATIC mp_obj_t busio_uart_obj_reset_input_buffer(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_reset_input_buffer_obj, busio_uart_obj_reset_input_buffer); -//| .. class:: busio.UART.Parity() -//| -//| Enum-like class to define the parity used to verify correct data transfer. -//| -//| .. data:: ODD -//| -//| Total number of ones should be odd. -//| -//| .. data:: EVEN -//| -//| Total number of ones should be even. -//| +//|class busio: +//| def __init__(self, ): +//| """Enum-like class to define the parity used to verify correct data transfer.""" +//| ODD: Any = +//| """Total number of ones should be odd.""" +//| ... +//| EVEN: Any = +//| """Total number of ones should be even.""" +//| ... +//| ... const mp_obj_type_t busio_uart_parity_type; const busio_uart_parity_obj_t busio_uart_parity_odd_obj = { -- cgit v1.2.3 From e7874277abc43d794f521d519f522cb068ab95ef Mon Sep 17 00:00:00 2001 From: dherrada Date: Sat, 25 Apr 2020 15:35:24 -0400 Subject: Fixed empty lines --- shared-bindings/busio/UART.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/shared-bindings/busio/UART.c b/shared-bindings/busio/UART.c index 59c95528d..954cbdd20 100644 --- a/shared-bindings/busio/UART.c +++ b/shared-bindings/busio/UART.c @@ -39,8 +39,6 @@ #include "py/stream.h" #include "supervisor/shared/translate.h" - - //|class UART: //| """.. currentmodule:: busio //| -- cgit v1.2.3 From 27e085ec360fd625210fe70bf71019b8019363b3 Mon Sep 17 00:00:00 2001 From: dherrada Date: Sat, 25 Apr 2020 15:36:16 -0400 Subject: Added pyi to OneWire.c --- shared-bindings/busio/OneWire.c | 92 ++++++++++++++++++++--------------------- 1 file changed, 44 insertions(+), 48 deletions(-) diff --git a/shared-bindings/busio/OneWire.c b/shared-bindings/busio/OneWire.c index 022d6afcf..dd4410d46 100644 --- a/shared-bindings/busio/OneWire.c +++ b/shared-bindings/busio/OneWire.c @@ -34,34 +34,36 @@ #include "shared-bindings/busio/OneWire.h" #include "shared-bindings/util.h" -//| .. currentmodule:: busio +//|class OneWire: +//| """.. currentmodule:: busio //| -//| :class:`OneWire` -- Lowest-level of the Maxim OneWire protocol -//| ================================================================= +//| :class:`OneWire` -- Lowest-level of the Maxim OneWire protocol +//| =================================================================""" //| -//| :class:`~busio.OneWire` implements the timing-sensitive foundation of the Maxim -//| (formerly Dallas Semi) OneWire protocol. +//| def __init__(self, pin: microcontroller.Pin): +//| """:class:`~busio.OneWire` implements the timing-sensitive foundation of the Maxim +//| (formerly Dallas Semi) OneWire protocol. //| -//| Protocol definition is here: https://www.maximintegrated.com/en/app-notes/index.mvp/id/126 +//| Protocol definition is here: https://www.maximintegrated.com/en/app-notes/index.mvp/id/126 //| -//| .. class:: OneWire(pin) +//| .. class:: OneWire(pin) //| -//| Create a OneWire object associated with the given pin. The object -//| implements the lowest level timing-sensitive bits of the protocol. +//| Create a OneWire object associated with the given pin. The object +//| implements the lowest level timing-sensitive bits of the protocol. //| -//| :param ~microcontroller.Pin pin: Pin connected to the OneWire bus +//| :param ~microcontroller.Pin pin: Pin connected to the OneWire bus //| -//| Read a short series of pulses:: +//| Read a short series of pulses:: //| -//| import busio -//| import board -//| -//| onewire = busio.OneWire(board.D7) -//| onewire.reset() -//| onewire.write_bit(True) -//| onewire.write_bit(False) -//| print(onewire.read_bit()) +//| import busio +//| import board //| +//| onewire = busio.OneWire(board.D7) +//| onewire.reset() +//| onewire.write_bit(True) +//| onewire.write_bit(False) +//| print(onewire.read_bit())""" +//| ... STATIC mp_obj_t busio_onewire_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_pin }; static const mp_arg_t allowed_args[] = { @@ -78,10 +80,9 @@ STATIC mp_obj_t busio_onewire_make_new(const mp_obj_type_t *type, size_t n_args, return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialize the OneWire bus and release any hardware resources for reuse. -//| +//| def deinit(self, ) -> Any: +//| """Deinitialize the OneWire bus and release any hardware resources for reuse.""" +//| ... STATIC mp_obj_t busio_onewire_deinit(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_onewire_deinit(self); @@ -95,17 +96,15 @@ STATIC void check_for_deinit(busio_onewire_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_onewire_deinit(args[0]); @@ -113,13 +112,12 @@ STATIC mp_obj_t busio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_onewire___exit___obj, 4, 4, busio_onewire_obj___exit__); -//| .. method:: reset() -//| -//| Reset the OneWire bus and read presence -//| -//| :returns: False when at least one device is present -//| :rtype: bool +//| def reset(self, ) -> Any: +//| """Reset the OneWire bus and read presence //| +//| :returns: False when at least one device is present +//| :rtype: bool""" +//| ... STATIC mp_obj_t busio_onewire_obj_reset(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -128,13 +126,12 @@ STATIC mp_obj_t busio_onewire_obj_reset(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_reset_obj, busio_onewire_obj_reset); -//| .. method:: read_bit() -//| -//| Read in a bit -//| -//| :returns: bit state read -//| :rtype: bool +//| def read_bit(self, ) -> Any: +//| """Read in a bit //| +//| :returns: bit state read +//| :rtype: bool""" +//| ... STATIC mp_obj_t busio_onewire_obj_read_bit(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -143,10 +140,9 @@ STATIC mp_obj_t busio_onewire_obj_read_bit(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_read_bit_obj, busio_onewire_obj_read_bit); -//| .. method:: write_bit(value) -//| -//| Write out a bit based on value. -//| +//| def write_bit(self, value: Any) -> Any: +//| """Write out a bit based on value.""" +//| ... STATIC mp_obj_t busio_onewire_obj_write_bit(mp_obj_t self_in, mp_obj_t bool_obj) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); -- cgit v1.2.3 From 8344fce9940c2c964663e541908069b03cbe14e5 Mon Sep 17 00:00:00 2001 From: dherrada Date: Mon, 27 Apr 2020 13:06:47 -0400 Subject: Added inline pyi to analogio --- shared-bindings/analogio/AnalogIn.c | 71 ++++++++++++++++-------------------- shared-bindings/analogio/AnalogOut.c | 62 +++++++++++++++---------------- 2 files changed, 61 insertions(+), 72 deletions(-) diff --git a/shared-bindings/analogio/AnalogIn.c b/shared-bindings/analogio/AnalogIn.c index b4eeb2af1..a8afe75bd 100644 --- a/shared-bindings/analogio/AnalogIn.c +++ b/shared-bindings/analogio/AnalogIn.c @@ -36,27 +36,25 @@ #include "shared-bindings/analogio/AnalogIn.h" #include "shared-bindings/util.h" -//| .. currentmodule:: analogio +//|class AnalogIn: +//| """:class:`AnalogIn` -- read analog voltage +//| ============================================ //| -//| :class:`AnalogIn` -- read analog voltage -//| ============================================ +//| Usage:: //| -//| Usage:: +//| import analogio +//| from board import * //| -//| import analogio -//| from board import * +//| adc = analogio.AnalogIn(A1) +//| val = adc.value""" //| -//| adc = analogio.AnalogIn(A1) -//| val = adc.value +//| def __init__(self, pin: microcontroller.Pin): //| - -//| .. class:: AnalogIn(pin) -//| -//| Use the AnalogIn on the given pin. The reference voltage varies by -//| platform so use ``reference_voltage`` to read the configured setting. -//| -//| :param ~microcontroller.Pin pin: the pin to read from +//| """Use the AnalogIn on the given pin. The reference voltage varies by +//| platform so use ``reference_voltage`` to read the configured setting. //| +//| :param ~microcontroller.Pin pin: the pin to read from""" +//| ... STATIC mp_obj_t analogio_analogin_make_new(const mp_obj_type_t *type, mp_uint_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { // check number of arguments @@ -72,10 +70,9 @@ STATIC mp_obj_t analogio_analogin_make_new(const mp_obj_type_t *type, return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Turn off the AnalogIn and release the pin for other use. -//| +//| def deinit(self, ) -> Any: +//| """Turn off the AnalogIn and release the pin for other use.""" +//| ... STATIC mp_obj_t analogio_analogin_deinit(mp_obj_t self_in) { analogio_analogin_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_analogio_analogin_deinit(self); @@ -88,17 +85,15 @@ STATIC void check_for_deinit(analogio_analogin_obj_t *self) { raise_deinited_error(); } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t analogio_analogin___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_analogio_analogin_deinit(args[0]); @@ -106,13 +101,12 @@ STATIC mp_obj_t analogio_analogin___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(analogio_analogin___exit___obj, 4, 4, analogio_analogin___exit__); -//| .. attribute:: value -//| -//| The value on the analog pin between 0 and 65535 inclusive (16-bit). (read-only) -//| -//| Even if the underlying analog to digital converter (ADC) is lower -//| resolution, the value is 16-bit. +//| value: Any = +//| """The value on the analog pin between 0 and 65535 inclusive (16-bit). (read-only) //| +//| Even if the underlying analog to digital converter (ADC) is lower +//| resolution, the value is 16-bit.""" +//| ... STATIC mp_obj_t analogio_analogin_obj_get_value(mp_obj_t self_in) { analogio_analogin_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -127,11 +121,10 @@ const mp_obj_property_t analogio_analogin_value_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: reference_voltage -//| -//| The maximum voltage measurable (also known as the reference voltage) as a -//| `float` in Volts. -//| +//| reference_voltage: Any = +//| """The maximum voltage measurable (also known as the reference voltage) as a +//| `float` in Volts.""" +//| ... STATIC mp_obj_t analogio_analogin_obj_get_reference_voltage(mp_obj_t self_in) { analogio_analogin_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/analogio/AnalogOut.c b/shared-bindings/analogio/AnalogOut.c index 89cf147b2..1b5808e6c 100644 --- a/shared-bindings/analogio/AnalogOut.c +++ b/shared-bindings/analogio/AnalogOut.c @@ -36,28 +36,27 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: analogio +//|class AnalogOut: +//| """.. currentmodule:: analogio //| -//| :class:`AnalogOut` -- output analog voltage -//| ============================================ +//| :class:`AnalogOut` -- output analog voltage +//| ============================================ //| -//| The AnalogOut is used to output analog values (a specific voltage). +//| The AnalogOut is used to output analog values (a specific voltage). //| -//| Example usage:: +//| Example usage:: //| -//| import analogio -//| from microcontroller import pin +//| import analogio +//| from microcontroller import pin //| -//| dac = analogio.AnalogOut(pin.PA02) # output on pin PA02 -//| dac.value = 32768 # makes PA02 1.65V +//| dac = analogio.AnalogOut(pin.PA02) # output on pin PA02 +//| dac.value = 32768 # makes PA02 1.65V""" +//| def __init__(self, pin: microcontroller.Pin): //| - -//| .. class:: AnalogOut(pin) -//| -//| Use the AnalogOut on the given pin. -//| -//| :param ~microcontroller.Pin pin: the pin to output to +//| """Use the AnalogOut on the given pin. //| +//| :param ~microcontroller.Pin pin: the pin to output to""" +//| ... STATIC mp_obj_t analogio_analogout_make_new(const mp_obj_type_t *type, mp_uint_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { // check arguments mp_arg_check_num(n_args, kw_args, 1, 1, false); @@ -71,10 +70,9 @@ STATIC mp_obj_t analogio_analogout_make_new(const mp_obj_type_t *type, mp_uint_t return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Turn off the AnalogOut and release the pin for other use. -//| +//| def deinit(self, ) -> Any: +//| """Turn off the AnalogOut and release the pin for other use.""" +//| ... STATIC mp_obj_t analogio_analogout_deinit(mp_obj_t self_in) { analogio_analogout_obj_t *self = self_in; @@ -84,17 +82,15 @@ STATIC mp_obj_t analogio_analogout_deinit(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(analogio_analogout_deinit_obj, analogio_analogout_deinit); -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t analogio_analogout___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_analogio_analogout_deinit(args[0]); @@ -102,12 +98,12 @@ STATIC mp_obj_t analogio_analogout___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(analogio_analogout___exit___obj, 4, 4, analogio_analogout___exit__); -//| .. attribute:: value -//| -//| The value on the analog pin between 0 and 65535 inclusive (16-bit). (write-only) +//| value: Any = +//| """The value on the analog pin between 0 and 65535 inclusive (16-bit). (write-only) //| -//| Even if the underlying digital to analog converter (DAC) is lower -//| resolution, the value is 16-bit. +//| Even if the underlying digital to analog converter (DAC) is lower +//| resolution, the value is 16-bit.""" +//| ... STATIC mp_obj_t analogio_analogout_obj_set_value(mp_obj_t self_in, mp_obj_t value) { analogio_analogout_obj_t *self = MP_OBJ_TO_PTR(self_in); if (common_hal_analogio_analogout_deinited(self)) { -- cgit v1.2.3 From e96235d0cf7e6548982d1dde4ef69492dfc19cd2 Mon Sep 17 00:00:00 2001 From: dherrada Date: Mon, 27 Apr 2020 16:35:03 -0400 Subject: Added inline pyi to audiobusio --- shared-bindings/audiobusio/I2SOut.c | 188 +++++++++++++++++------------------- shared-bindings/audiobusio/PDMIn.c | 100 +++++++++---------- 2 files changed, 140 insertions(+), 148 deletions(-) diff --git a/shared-bindings/audiobusio/I2SOut.c b/shared-bindings/audiobusio/I2SOut.c index cd662acb5..cad17ad18 100644 --- a/shared-bindings/audiobusio/I2SOut.c +++ b/shared-bindings/audiobusio/I2SOut.c @@ -35,65 +35,64 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: audiobusio -//| -//| :class:`I2SOut` -- Output an I2S audio signal -//| ======================================================== -//| -//| I2S is used to output an audio signal on an I2S bus. -//| -//| .. class:: I2SOut(bit_clock, word_select, data, *, left_justified) -//| -//| Create a I2SOut object associated with the given pins. -//| -//| :param ~microcontroller.Pin bit_clock: The bit clock (or serial clock) pin -//| :param ~microcontroller.Pin word_select: The word select (or left/right clock) pin -//| :param ~microcontroller.Pin data: The data pin -//| :param bool left_justified: True when data bits are aligned with the word select clock. False -//| when they are shifted by one to match classic I2S protocol. -//| -//| Simple 8ksps 440 Hz sine wave on `Metro M0 Express `_ -//| using `UDA1334 Breakout `_:: -//| -//| import audiobusio -//| import audiocore -//| import board -//| import array -//| import time -//| import math -//| -//| # Generate one period of sine wave. -//| length = 8000 // 440 -//| sine_wave = array.array("H", [0] * length) -//| for i in range(length): -//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) -//| -//| sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) -//| i2s = audiobusio.I2SOut(board.D1, board.D0, board.D9) -//| i2s.play(sine_wave, loop=True) -//| time.sleep(1) -//| i2s.stop() -//| -//| Playing a wave file from flash:: -//| -//| import board -//| import audioio -//| import audiocore -//| import audiobusio -//| import digitalio -//| -//| -//| f = open("cplay-5.1-16bit-16khz.wav", "rb") -//| wav = audiocore.WaveFile(f) -//| -//| a = audiobusio.I2SOut(board.D1, board.D0, board.D9) -//| -//| print("playing") -//| a.play(wav) -//| while a.playing: -//| pass -//| print("stopped") -//| +//|class I2SOut: +//| """.. currentmodule:: audiobusio +//| +//| :class:`I2SOut` -- Output an I2S audio signal +//| ======================================================== +//| +//| I2S is used to output an audio signal on an I2S bus.""" +//| def __init__(self, bit_clock: microcontroller.Pin, word_select: microcontroller.Pin, data: microcontroller.Pin, *, left_justified: bool): +//| """Create a I2SOut object associated with the given pins. +//| +//| :param ~microcontroller.Pin bit_clock: The bit clock (or serial clock) pin +//| :param ~microcontroller.Pin word_select: The word select (or left/right clock) pin +//| :param ~microcontroller.Pin data: The data pin +//| :param bool left_justified: True when data bits are aligned with the word select clock. False +//| when they are shifted by one to match classic I2S protocol. +//| +//| Simple 8ksps 440 Hz sine wave on `Metro M0 Express `_ +//| using `UDA1334 Breakout `_:: +//| +//| import audiobusio +//| import audiocore +//| import board +//| import array +//| import time +//| import math +//| +//| # Generate one period of sine wave. +//| length = 8000 // 440 +//| sine_wave = array.array("H", [0] * length) +//| for i in range(length): +//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) +//| +//| sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) +//| i2s = audiobusio.I2SOut(board.D1, board.D0, board.D9) +//| i2s.play(sine_wave, loop=True) +//| time.sleep(1) +//| i2s.stop() +//| +//| Playing a wave file from flash:: +//| +//| import board +//| import audioio +//| import audiocore +//| import audiobusio +//| import digitalio +//| +//| +//| f = open("cplay-5.1-16bit-16khz.wav", "rb") +//| wav = audiocore.WaveFile(f) +//| +//| a = audiobusio.I2SOut(board.D1, board.D0, board.D9) +//| +//| print("playing") +//| a.play(wav) +//| while a.playing: +//| pass +//| print("stopped")""" +//| ... STATIC mp_obj_t audiobusio_i2sout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_bit_clock, ARG_word_select, ARG_data, ARG_left_justified }; static const mp_arg_t allowed_args[] = { @@ -116,10 +115,9 @@ STATIC mp_obj_t audiobusio_i2sout_make_new(const mp_obj_type_t *type, size_t n_a return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the I2SOut and releases any hardware resources for reuse. -//| +//| def deinit(self, ) -> Any: +//| """Deinitialises the I2SOut and releases any hardware resources for reuse.""" +//| ... STATIC mp_obj_t audiobusio_i2sout_deinit(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiobusio_i2sout_deinit(self); @@ -132,17 +130,15 @@ STATIC void check_for_deinit(audiobusio_i2sout_obj_t *self) { raise_deinited_error(); } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t audiobusio_i2sout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiobusio_i2sout_deinit(args[0]); @@ -151,15 +147,14 @@ STATIC mp_obj_t audiobusio_i2sout_obj___exit__(size_t n_args, const mp_obj_t *ar STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiobusio_i2sout___exit___obj, 4, 4, audiobusio_i2sout_obj___exit__); -//| .. method:: play(sample, *, loop=False) +//| def play(self, sample: Any, *, loop: Any = False) -> Any: +//| """Plays the sample once when loop=False and continuously when loop=True. +//| Does not block. Use `playing` to block. //| -//| Plays the sample once when loop=False and continuously when loop=True. -//| Does not block. Use `playing` to block. -//| -//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. -//| -//| The sample itself should consist of 8 bit or 16 bit samples. +//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. //| +//| The sample itself should consist of 8 bit or 16 bit samples.""" +//| ... STATIC mp_obj_t audiobusio_i2sout_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -178,10 +173,9 @@ STATIC mp_obj_t audiobusio_i2sout_obj_play(size_t n_args, const mp_obj_t *pos_ar } MP_DEFINE_CONST_FUN_OBJ_KW(audiobusio_i2sout_play_obj, 1, audiobusio_i2sout_obj_play); -//| .. method:: stop() -//| -//| Stops playback. -//| +//| def stop(self, ) -> Any: +//| """Stops playback.""" +//| ... STATIC mp_obj_t audiobusio_i2sout_obj_stop(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -190,10 +184,9 @@ STATIC mp_obj_t audiobusio_i2sout_obj_stop(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiobusio_i2sout_stop_obj, audiobusio_i2sout_obj_stop); -//| .. attribute:: playing -//| -//| True when the audio sample is being output. (read-only) -//| +//| playing: Any = +//| """True when the audio sample is being output. (read-only)""" +//| ... STATIC mp_obj_t audiobusio_i2sout_obj_get_playing(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -208,10 +201,9 @@ const mp_obj_property_t audiobusio_i2sout_playing_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: pause() -//| -//| Stops playback temporarily while remembering the position. Use `resume` to resume playback. -//| +//| def pause(self, ) -> Any: +//| """Stops playback temporarily while remembering the position. Use `resume` to resume playback.""" +//| ... STATIC mp_obj_t audiobusio_i2sout_obj_pause(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -224,10 +216,9 @@ STATIC mp_obj_t audiobusio_i2sout_obj_pause(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiobusio_i2sout_pause_obj, audiobusio_i2sout_obj_pause); -//| .. method:: resume() -//| -//| Resumes sample playback after :py:func:`pause`. -//| +//| def resume(self, ) -> Any: +//| """Resumes sample playback after :py:func:`pause`.""" +//| ... STATIC mp_obj_t audiobusio_i2sout_obj_resume(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -240,10 +231,9 @@ STATIC mp_obj_t audiobusio_i2sout_obj_resume(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiobusio_i2sout_resume_obj, audiobusio_i2sout_obj_resume); -//| .. attribute:: paused -//| -//| True when playback is paused. (read-only) -//| +//| paused: Any = +//| """True when playback is paused. (read-only)""" +//| ... STATIC mp_obj_t audiobusio_i2sout_obj_get_paused(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audiobusio/PDMIn.c b/shared-bindings/audiobusio/PDMIn.c index fce6cf7a2..b75545ba7 100644 --- a/shared-bindings/audiobusio/PDMIn.c +++ b/shared-bindings/audiobusio/PDMIn.c @@ -36,32 +36,39 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: audiobusio -//| -//| :class:`PDMIn` -- Record an input PDM audio stream -//| ======================================================== -//| -//| PDMIn can be used to record an input audio signal on a given set of pins. + + + + + + + +//|class PDMIn: +//| """.. currentmodule:: audiobusio //| -//| .. class:: PDMIn(clock_pin, data_pin, *, sample_rate=16000, bit_depth=8, mono=True, oversample=64, startup_delay=0.11) +//| :class:`PDMIn` -- Record an input PDM audio stream +//| ======================================================== //| -//| Create a PDMIn object associated with the given pins. This allows you to -//| record audio signals from the given pins. Individual ports may put further -//| restrictions on the recording parameters. The overall sample rate is -//| determined by `sample_rate` x ``oversample``, and the total must be 1MHz or -//| higher, so `sample_rate` must be a minimum of 16000. +//| PDMIn can be used to record an input audio signal on a given set of pins.""" //| -//| :param ~microcontroller.Pin clock_pin: The pin to output the clock to -//| :param ~microcontroller.Pin data_pin: The pin to read the data from -//| :param int sample_rate: Target sample_rate of the resulting samples. Check `sample_rate` for actual value. -//| Minimum sample_rate is about 16000 Hz. -//| :param int bit_depth: Final number of bits per sample. Must be divisible by 8 -//| :param bool mono: True when capturing a single channel of audio, captures two channels otherwise -//| :param int oversample: Number of single bit samples to decimate into a final sample. Must be divisible by 8 -//| :param float startup_delay: seconds to wait after starting microphone clock -//| to allow microphone to turn on. Most require only 0.01s; some require 0.1s. Longer is safer. -//| Must be in range 0.0-1.0 seconds. +//| def __init__(self, clock_pin: microcontroller.Pin, data_pin: microcontroller.Pin, *, sample_rate: int = 16000, bit_depth: int = 8, mono: bool = True, oversample: int = 64, startup_delay: float = 0.11): +//| """Create a PDMIn object associated with the given pins. This allows you to +//| record audio signals from the given pins. Individual ports may put further +//| restrictions on the recording parameters. The overall sample rate is +//| determined by `sample_rate` x ``oversample``, and the total must be 1MHz or +//| higher, so `sample_rate` must be a minimum of 16000. //| +//| :param ~microcontroller.Pin clock_pin: The pin to output the clock to +//| :param ~microcontroller.Pin data_pin: The pin to read the data from +//| :param int sample_rate: Target sample_rate of the resulting samples. Check `sample_rate` for actual value. +//| Minimum sample_rate is about 16000 Hz. +//| :param int bit_depth: Final number of bits per sample. Must be divisible by 8 +//| :param bool mono: True when capturing a single channel of audio, captures two channels otherwise +//| :param int oversample: Number of single bit samples to decimate into a final sample. Must be divisible by 8 +//| :param float startup_delay: seconds to wait after starting microphone clock +//| to allow microphone to turn on. Most require only 0.01s; some require 0.1s. Longer is safer. +//| Must be in range 0.0-1.0 seconds.""" +//| ... //| Record 8-bit unsigned samples to buffer:: //| @@ -86,7 +93,7 @@ //| b.append(0) //| with audiobusio.PDMIn(board.MICROPHONE_CLOCK, board.MICROPHONE_DATA, sample_rate=16000, bit_depth=16) as mic: //| mic.record(b, len(b)) -//| +//| STATIC mp_obj_t audiobusio_pdmin_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_clock_pin, ARG_data_pin, ARG_sample_rate, ARG_bit_depth, ARG_mono, ARG_oversample, ARG_startup_delay }; static const mp_arg_t allowed_args[] = { @@ -138,10 +145,9 @@ STATIC mp_obj_t audiobusio_pdmin_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the PDMIn and releases any hardware resources for reuse. -//| +//| def deinit(self, ) -> Any: +//| """Deinitialises the PDMIn and releases any hardware resources for reuse.""" +//| ... STATIC mp_obj_t audiobusio_pdmin_deinit(mp_obj_t self_in) { audiobusio_pdmin_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiobusio_pdmin_deinit(self); @@ -154,16 +160,14 @@ STATIC void check_for_deinit(audiobusio_pdmin_obj_t *self) { raise_deinited_error(); } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context.""" +//| ... STATIC mp_obj_t audiobusio_pdmin_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiobusio_pdmin_deinit(args[0]); @@ -172,18 +176,17 @@ STATIC mp_obj_t audiobusio_pdmin_obj___exit__(size_t n_args, const mp_obj_t *arg STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiobusio_pdmin___exit___obj, 4, 4, audiobusio_pdmin_obj___exit__); -//| .. method:: record(destination, destination_length) -//| -//| Records destination_length bytes of samples to destination. This is +//| def record(self, destination: Any, destination_length: Any) -> Any: +//| """Records destination_length bytes of samples to destination. This is //| blocking. //| -//| An IOError may be raised when the destination is too slow to record the -//| audio at the given rate. For internal flash, writing all 1s to the file -//| before recording is recommended to speed up writes. -//| -//| :return: The number of samples recorded. If this is less than ``destination_length``, -//| some samples were missed due to processing time. +//| An IOError may be raised when the destination is too slow to record the +//| audio at the given rate. For internal flash, writing all 1s to the file +//| before recording is recommended to speed up writes. //| +//| :return: The number of samples recorded. If this is less than ``destination_length``, +//| some samples were missed due to processing time.""" +//| ... STATIC mp_obj_t audiobusio_pdmin_obj_record(mp_obj_t self_obj, mp_obj_t destination, mp_obj_t destination_length) { audiobusio_pdmin_obj_t *self = MP_OBJ_TO_PTR(self_obj); check_for_deinit(self); @@ -214,11 +217,10 @@ STATIC mp_obj_t audiobusio_pdmin_obj_record(mp_obj_t self_obj, mp_obj_t destinat } MP_DEFINE_CONST_FUN_OBJ_3(audiobusio_pdmin_record_obj, audiobusio_pdmin_obj_record); -//| .. attribute:: sample_rate -//| -//| The actual sample_rate of the recording. This may not match the constructed -//| sample rate due to internal clock limitations. -//| +//| sample_rate: Any = +//| """The actual sample_rate of the recording. This may not match the constructed +//| sample rate due to internal clock limitations.""" +//| ... STATIC mp_obj_t audiobusio_pdmin_obj_get_sample_rate(mp_obj_t self_in) { audiobusio_pdmin_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); -- cgit v1.2.3 From 088b5b1785c2acd772dfaf97ce09a3098fdca978 Mon Sep 17 00:00:00 2001 From: dherrada Date: Mon, 27 Apr 2020 16:49:12 -0400 Subject: Added inline pyi to audiocore --- shared-bindings/audiocore/RawSample.c | 114 ++++++++++++++++------------------ shared-bindings/audiocore/WaveFile.c | 105 +++++++++++++++---------------- 2 files changed, 104 insertions(+), 115 deletions(-) diff --git a/shared-bindings/audiocore/RawSample.c b/shared-bindings/audiocore/RawSample.c index 96af58a4f..b879b1b97 100644 --- a/shared-bindings/audiocore/RawSample.c +++ b/shared-bindings/audiocore/RawSample.c @@ -35,45 +35,45 @@ #include "shared-bindings/audiocore/RawSample.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: audiocore -//| -//| :class:`RawSample` -- A raw audio sample buffer -//| ======================================================== -//| -//| An in-memory sound sample -//| -//| .. class:: RawSample(buffer, *, channel_count=1, sample_rate=8000) -//| -//| Create a RawSample based on the given buffer of signed values. If channel_count is more than -//| 1 then each channel's samples should alternate. In other words, for a two channel buffer, the -//| first sample will be for channel 1, the second sample will be for channel two, the third for -//| channel 1 and so on. -//| -//| :param array.array buffer: An `array.array` with samples -//| :param int channel_count: The number of channels in the buffer -//| :param int sample_rate: The desired playback sample rate -//| -//| Simple 8ksps 440 Hz sin wave:: -//| -//| import audiocore -//| import audioio -//| import board -//| import array -//| import time -//| import math -//| -//| # Generate one period of sine wav. -//| length = 8000 // 440 -//| sine_wave = array.array("h", [0] * length) -//| for i in range(length): -//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15)) -//| -//| dac = audioio.AudioOut(board.SPEAKER) -//| sine_wave = audiocore.RawSample(sine_wave) -//| dac.play(sine_wave, loop=True) -//| time.sleep(1) -//| dac.stop() -//| +//|class RawSample: +//| """.. currentmodule:: audiocore +//| +//| :class:`RawSample` -- A raw audio sample buffer +//| ======================================================== +//| +//| An in-memory sound sample""" +//| +//| def __init__(self, buffer: array.array, *, channel_count: int = 1, sample_rate: int = 8000): +//| """Create a RawSample based on the given buffer of signed values. If channel_count is more than +//| 1 then each channel's samples should alternate. In other words, for a two channel buffer, the +//| first sample will be for channel 1, the second sample will be for channel two, the third for +//| channel 1 and so on. +//| +//| :param array.array buffer: An `array.array` with samples +//| :param int channel_count: The number of channels in the buffer +//| :param int sample_rate: The desired playback sample rate +//| +//| Simple 8ksps 440 Hz sin wave:: +//| +//| import audiocore +//| import audioio +//| import board +//| import array +//| import time +//| import math +//| +//| # Generate one period of sine wav. +//| length = 8000 // 440 +//| sine_wave = array.array("h", [0] * length) +//| for i in range(length): +//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15)) +//| +//| dac = audioio.AudioOut(board.SPEAKER) +//| sine_wave = audiocore.RawSample(sine_wave) +//| dac.play(sine_wave, loop=True) +//| time.sleep(1) +//| dac.stop()""" +//| ... STATIC mp_obj_t audioio_rawsample_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_channel_count, ARG_sample_rate }; static const mp_arg_t allowed_args[] = { @@ -105,10 +105,9 @@ STATIC mp_obj_t audioio_rawsample_make_new(const mp_obj_type_t *type, size_t n_a return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the AudioOut and releases any hardware resources for reuse. -//| +//| def deinit(self, ) -> Any: +//| """Deinitialises the AudioOut and releases any hardware resources for reuse.""" +//| ... STATIC mp_obj_t audioio_rawsample_deinit(mp_obj_t self_in) { audioio_rawsample_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audioio_rawsample_deinit(self); @@ -122,17 +121,15 @@ STATIC void check_for_deinit(audioio_rawsample_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t audioio_rawsample_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audioio_rawsample_deinit(args[0]); @@ -140,13 +137,12 @@ STATIC mp_obj_t audioio_rawsample_obj___exit__(size_t n_args, const mp_obj_t *ar } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audioio_rawsample___exit___obj, 4, 4, audioio_rawsample_obj___exit__); -//| .. attribute:: sample_rate -//| -//| 32 bit value that dictates how quickly samples are played in Hertz (cycles per second). -//| When the sample is looped, this can change the pitch output without changing the underlying -//| sample. This will not change the sample rate of any active playback. Call ``play`` again to -//| change it. -//| +//| sample_rate: Any = +//| """32 bit value that dictates how quickly samples are played in Hertz (cycles per second). +//| When the sample is looped, this can change the pitch output without changing the underlying +//| sample. This will not change the sample rate of any active playback. Call ``play`` again to +//| change it.""" +//| ... STATIC mp_obj_t audioio_rawsample_obj_get_sample_rate(mp_obj_t self_in) { audioio_rawsample_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audiocore/WaveFile.c b/shared-bindings/audiocore/WaveFile.c index 178d2a139..f57e1f877 100644 --- a/shared-bindings/audiocore/WaveFile.c +++ b/shared-bindings/audiocore/WaveFile.c @@ -33,44 +33,43 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: audiocore +//|class WaveFile: +//| """.. currentmodule:: audiocore //| -//| :class:`WaveFile` -- Load a wave file for audio playback -//| ======================================================== +//| :class:`WaveFile` -- Load a wave file for audio playback +//| ======================================================== //| -//| A .wav file prepped for audio playback. Only mono and stereo files are supported. Samples must -//| be 8 bit unsigned or 16 bit signed. If a buffer is provided, it will be used instead of allocating -//| an internal buffer. +//| A .wav file prepped for audio playback. Only mono and stereo files are supported. Samples must +//| be 8 bit unsigned or 16 bit signed. If a buffer is provided, it will be used instead of allocating +//| an internal buffer.""" +//| def __init__(self, file: typing.BinaryIO, buffer: bytearray): +//| """Load a .wav file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. //| -//| .. class:: WaveFile(file[, buffer]) +//| :param typing.BinaryIO file: Already opened wave file +//| :param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two 512 byte buffers are allocated internally. //| -//| Load a .wav file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. //| -//| :param typing.BinaryIO file: Already opened wave file -//| :param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two 512 byte buffers are allocated internally. +//| Playing a wave file from flash:: //| +//| import board +//| import audiocore +//| import audioio +//| import digitalio //| -//| Playing a wave file from flash:: +//| # Required for CircuitPlayground Express +//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) +//| speaker_enable.switch_to_output(value=True) //| -//| import board -//| import audiocore -//| import audioio -//| import digitalio -//| -//| # Required for CircuitPlayground Express -//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) -//| speaker_enable.switch_to_output(value=True) -//| -//| data = open("cplay-5.1-16bit-16khz.wav", "rb") -//| wav = audiocore.WaveFile(data) -//| a = audioio.AudioOut(board.A0) -//| -//| print("playing") -//| a.play(wav) -//| while a.playing: -//| pass -//| print("stopped") +//| data = open("cplay-5.1-16bit-16khz.wav", "rb") +//| wav = audiocore.WaveFile(data) +//| a = audioio.AudioOut(board.A0) //| +//| print("playing") +//| a.play(wav) +//| while a.playing: +//| pass +//| print("stopped")""" +//| ... STATIC mp_obj_t audioio_wavefile_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 1, 2, false); @@ -93,10 +92,9 @@ STATIC mp_obj_t audioio_wavefile_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the WaveFile and releases all memory resources for reuse. -//| +//| def deinit(self, ) -> Any: +//| """Deinitialises the WaveFile and releases all memory resources for reuse.""" +//| ... STATIC mp_obj_t audioio_wavefile_deinit(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audioio_wavefile_deinit(self); @@ -110,17 +108,15 @@ STATIC void check_for_deinit(audioio_wavefile_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t audioio_wavefile_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audioio_wavefile_deinit(args[0]); @@ -128,12 +124,11 @@ STATIC mp_obj_t audioio_wavefile_obj___exit__(size_t n_args, const mp_obj_t *arg } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audioio_wavefile___exit___obj, 4, 4, audioio_wavefile_obj___exit__); -//| .. attribute:: sample_rate -//| -//| 32 bit value that dictates how quickly samples are loaded into the DAC -//| in Hertz (cycles per second). When the sample is looped, this can change -//| the pitch output without changing the underlying sample. -//| +//| sample_rate: Any = +//| """32 bit value that dictates how quickly samples are loaded into the DAC +//| in Hertz (cycles per second). When the sample is looped, this can change +//| the pitch output without changing the underlying sample.""" +//| ... STATIC mp_obj_t audioio_wavefile_obj_get_sample_rate(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -156,10 +151,9 @@ const mp_obj_property_t audioio_wavefile_sample_rate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: bits_per_sample -//| -//| Bits per sample. (read only) -//| +//| bits_per_sample: Any = +//| """Bits per sample. (read only)""" +//| ... STATIC mp_obj_t audioio_wavefile_obj_get_bits_per_sample(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -174,10 +168,9 @@ const mp_obj_property_t audioio_wavefile_bits_per_sample_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: channel_count -//| -//| Number of audio channels. (read only) -//| +//| channel_count: Any = +//| """Number of audio channels. (read only)""" +//| ... STATIC mp_obj_t audioio_wavefile_obj_get_channel_count(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); -- cgit v1.2.3 From 1363e6e724124b6f51619113b2877da53195dd1e Mon Sep 17 00:00:00 2001 From: dherrada Date: Mon, 27 Apr 2020 17:02:48 -0400 Subject: Added inline pyi to audiocore --- shared-bindings/audioio/AudioOut.c | 191 ++++++++++++++++++------------------- 1 file changed, 91 insertions(+), 100 deletions(-) diff --git a/shared-bindings/audioio/AudioOut.c b/shared-bindings/audioio/AudioOut.c index ea1efcdff..8df923e6f 100644 --- a/shared-bindings/audioio/AudioOut.c +++ b/shared-bindings/audioio/AudioOut.c @@ -36,64 +36,64 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: audioio -//| -//| :class:`AudioOut` -- Output an analog audio signal -//| ======================================================== -//| -//| AudioOut can be used to output an analog audio signal on a given pin. -//| -//| .. class:: AudioOut(left_channel, *, right_channel=None, quiescent_value=0x8000) -//| -//| Create a AudioOut object associated with the given pin(s). This allows you to -//| play audio signals out on the given pin(s). -//| -//| :param ~microcontroller.Pin left_channel: The pin to output the left channel to -//| :param ~microcontroller.Pin right_channel: The pin to output the right channel to -//| :param int quiescent_value: The output value when no signal is present. Samples should start -//| and end with this value to prevent audible popping. -//| -//| Simple 8ksps 440 Hz sin wave:: -//| -//| import audiocore -//| import audioio -//| import board -//| import array -//| import time -//| import math -//| -//| # Generate one period of sine wav. -//| length = 8000 // 440 -//| sine_wave = array.array("H", [0] * length) -//| for i in range(length): -//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) -//| -//| dac = audioio.AudioOut(board.SPEAKER) -//| sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) -//| dac.play(sine_wave, loop=True) -//| time.sleep(1) -//| dac.stop() -//| -//| Playing a wave file from flash:: -//| -//| import board -//| import audioio -//| import digitalio -//| -//| # Required for CircuitPlayground Express -//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) -//| speaker_enable.switch_to_output(value=True) -//| -//| data = open("cplay-5.1-16bit-16khz.wav", "rb") -//| wav = audiocore.WaveFile(data) -//| a = audioio.AudioOut(board.A0) -//| -//| print("playing") -//| a.play(wav) -//| while a.playing: -//| pass -//| print("stopped") -//| +//|class AudioOut: +//| """.. currentmodule:: audioio +//| +//| :class:`AudioOut` -- Output an analog audio signal +//| ======================================================== +//| +//| AudioOut can be used to output an analog audio signal on a given pin.""" +//| +//| def __init__(self, left_channel: microcontroller.Pin, *, right_channel: microcontroller.Pin = None, quiescent_value: int = 0x8000): +//| """Create a AudioOut object associated with the given pin(s). This allows you to +//| play audio signals out on the given pin(s). +//| +//| :param ~microcontroller.Pin left_channel: The pin to output the left channel to +//| :param ~microcontroller.Pin right_channel: The pin to output the right channel to +//| :param int quiescent_value: The output value when no signal is present. Samples should start +//| and end with this value to prevent audible popping. +//| +//| Simple 8ksps 440 Hz sin wave:: +//| +//| import audiocore +//| import audioio +//| import board +//| import array +//| import time +//| import math +//| +//| # Generate one period of sine wav. +//| length = 8000 // 440 +//| sine_wave = array.array("H", [0] * length) +//| for i in range(length): +//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) +//| +//| dac = audioio.AudioOut(board.SPEAKER) +//| sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) +//| dac.play(sine_wave, loop=True) +//| time.sleep(1) +//| dac.stop() +//| +//| Playing a wave file from flash:: +//| +//| import board +//| import audioio +//| import digitalio +//| +//| # Required for CircuitPlayground Express +//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) +//| speaker_enable.switch_to_output(value=True) +//| +//| data = open("cplay-5.1-16bit-16khz.wav", "rb") +//| wav = audiocore.WaveFile(data) +//| a = audioio.AudioOut(board.A0) +//| +//| print("playing") +//| a.play(wav) +//| while a.playing: +//| pass +//| print("stopped")""" +//| ... STATIC mp_obj_t audioio_audioout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_left_channel, ARG_right_channel, ARG_quiescent_value }; static const mp_arg_t allowed_args[] = { @@ -115,10 +115,9 @@ STATIC mp_obj_t audioio_audioout_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the AudioOut and releases any hardware resources for reuse. -//| +//| def deinit(self, ) -> Any: +//| """Deinitialises the AudioOut and releases any hardware resources for reuse.""" +//| ... STATIC mp_obj_t audioio_audioout_deinit(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audioio_audioout_deinit(self); @@ -131,17 +130,15 @@ STATIC void check_for_deinit(audioio_audioout_obj_t *self) { raise_deinited_error(); } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t audioio_audioout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audioio_audioout_deinit(args[0]); @@ -150,17 +147,16 @@ STATIC mp_obj_t audioio_audioout_obj___exit__(size_t n_args, const mp_obj_t *arg STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audioio_audioout___exit___obj, 4, 4, audioio_audioout_obj___exit__); -//| .. method:: play(sample, *, loop=False) +//| def play(self, sample: Any, *, loop: Any = False) -> Any: +//| """Plays the sample once when loop=False and continuously when loop=True. +//| Does not block. Use `playing` to block. //| -//| Plays the sample once when loop=False and continuously when loop=True. -//| Does not block. Use `playing` to block. -//| -//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. -//| -//| The sample itself should consist of 16 bit samples. Microcontrollers with a lower output -//| resolution will use the highest order bits to output. For example, the SAMD21 has a 10 bit -//| DAC that ignores the lowest 6 bits when playing 16 bit samples. +//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. //| +//| The sample itself should consist of 16 bit samples. Microcontrollers with a lower output +//| resolution will use the highest order bits to output. For example, the SAMD21 has a 10 bit +//| DAC that ignores the lowest 6 bits when playing 16 bit samples.""" +//| ... STATIC mp_obj_t audioio_audioout_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -179,10 +175,9 @@ STATIC mp_obj_t audioio_audioout_obj_play(size_t n_args, const mp_obj_t *pos_arg } MP_DEFINE_CONST_FUN_OBJ_KW(audioio_audioout_play_obj, 1, audioio_audioout_obj_play); -//| .. method:: stop() -//| -//| Stops playback and resets to the start of the sample. -//| +//| def stop(self, ) -> Any: +//| """Stops playback and resets to the start of the sample.""" +//| ... STATIC mp_obj_t audioio_audioout_obj_stop(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -191,10 +186,9 @@ STATIC mp_obj_t audioio_audioout_obj_stop(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audioio_audioout_stop_obj, audioio_audioout_obj_stop); -//| .. attribute:: playing -//| -//| True when an audio sample is being output even if `paused`. (read-only) -//| +//| playing: Any = +//| """True when an audio sample is being output even if `paused`. (read-only)""" +//| ... STATIC mp_obj_t audioio_audioout_obj_get_playing(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -209,10 +203,9 @@ const mp_obj_property_t audioio_audioout_playing_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: pause() -//| -//| Stops playback temporarily while remembering the position. Use `resume` to resume playback. -//| +//| def pause(self, ) -> Any: +//| """Stops playback temporarily while remembering the position. Use `resume` to resume playback.""" +//| ... STATIC mp_obj_t audioio_audioout_obj_pause(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -225,10 +218,9 @@ STATIC mp_obj_t audioio_audioout_obj_pause(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audioio_audioout_pause_obj, audioio_audioout_obj_pause); -//| .. method:: resume() -//| -//| Resumes sample playback after :py:func:`pause`. -//| +//| def resume(self, ) -> Any: +//| """Resumes sample playback after :py:func:`pause`.""" +//| ... STATIC mp_obj_t audioio_audioout_obj_resume(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -241,10 +233,9 @@ STATIC mp_obj_t audioio_audioout_obj_resume(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audioio_audioout_resume_obj, audioio_audioout_obj_resume); -//| .. attribute:: paused -//| -//| True when playback is paused. (read-only) -//| +//| paused: Any = +//| """True when playback is paused. (read-only)""" +//| ... STATIC mp_obj_t audioio_audioout_obj_get_paused(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); -- cgit v1.2.3 From 8330471068c4cba89802c2b0b9a91a60e656c12e Mon Sep 17 00:00:00 2001 From: dherrada Date: Mon, 27 Apr 2020 17:20:40 -0400 Subject: Added inline pyi to audiomixer --- shared-bindings/audiomixer/Mixer.c | 141 +++++++++++++++----------------- shared-bindings/audiomixer/MixerVoice.c | 49 ++++++----- 2 files changed, 90 insertions(+), 100 deletions(-) diff --git a/shared-bindings/audiomixer/Mixer.c b/shared-bindings/audiomixer/Mixer.c index 03ffb9373..1949f2add 100644 --- a/shared-bindings/audiomixer/Mixer.c +++ b/shared-bindings/audiomixer/Mixer.c @@ -38,50 +38,50 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: audiomixer +//|class Mixer: +//| """.. currentmodule:: audiomixer //| -//| :class:`Mixer` -- Mixes one or more audio samples together -//| =========================================================== +//| :class:`Mixer` -- Mixes one or more audio samples together +//| =========================================================== //| -//| Mixer mixes multiple samples into one sample. +//| Mixer mixes multiple samples into one sample.""" //| -//| .. class:: Mixer(voice_count=2, buffer_size=1024, channel_count=2, bits_per_sample=16, samples_signed=True, sample_rate=8000) +//| def __init__(self, voice_count: int = 2, buffer_size: int = 1024, channel_count: int = 2, bits_per_sample: int = 16, samples_signed: bool = True, sample_rate: int = 8000): +//| """Create a Mixer object that can mix multiple channels with the same sample rate. +//| Samples are accessed and controlled with the mixer's `audiomixer.MixerVoice` objects. //| -//| Create a Mixer object that can mix multiple channels with the same sample rate. -//| Samples are accessed and controlled with the mixer's `audiomixer.MixerVoice` objects. +//| :param int voice_count: The maximum number of voices to mix +//| :param int buffer_size: The total size in bytes of the buffers to mix into +//| :param int channel_count: The number of channels the source samples contain. 1 = mono; 2 = stereo. +//| :param int bits_per_sample: The bits per sample of the samples being played +//| :param bool samples_signed: Samples are signed (True) or unsigned (False) +//| :param int sample_rate: The sample rate to be used for all samples //| -//| :param int voice_count: The maximum number of voices to mix -//| :param int buffer_size: The total size in bytes of the buffers to mix into -//| :param int channel_count: The number of channels the source samples contain. 1 = mono; 2 = stereo. -//| :param int bits_per_sample: The bits per sample of the samples being played -//| :param bool samples_signed: Samples are signed (True) or unsigned (False) -//| :param int sample_rate: The sample rate to be used for all samples +//| Playing a wave file from flash:: //| -//| Playing a wave file from flash:: +//| import board +//| import audioio +//| import audiocore +//| import audiomixer +//| import digitalio //| -//| import board -//| import audioio -//| import audiocore -//| import audiomixer -//| import digitalio -//| -//| a = audioio.AudioOut(board.A0) -//| music = audiocore.WaveFile(open("cplay-5.1-16bit-16khz.wav", "rb")) -//| drum = audiocore.WaveFile(open("drum.wav", "rb")) -//| mixer = audiomixer.Mixer(voice_count=2, sample_rate=16000, channel_count=1, -//| bits_per_sample=16, samples_signed=True) -//| -//| print("playing") -//| # Have AudioOut play our Mixer source -//| a.play(mixer) -//| # Play the first sample voice -//| mixer.voice[0].play(music) -//| while mixer.playing: -//| # Play the second sample voice -//| mixer.voice[1].play(drum) -//| time.sleep(1) -//| print("stopped") +//| a = audioio.AudioOut(board.A0) +//| music = audiocore.WaveFile(open("cplay-5.1-16bit-16khz.wav", "rb")) +//| drum = audiocore.WaveFile(open("drum.wav", "rb")) +//| mixer = audiomixer.Mixer(voice_count=2, sample_rate=16000, channel_count=1, +//| bits_per_sample=16, samples_signed=True) //| +//| print("playing") +//| # Have AudioOut play our Mixer source +//| a.play(mixer) +//| # Play the first sample voice +//| mixer.voice[0].play(music) +//| while mixer.playing: +//| # Play the second sample voice +//| mixer.voice[1].play(drum) +//| time.sleep(1) +//| print("stopped")""" +//| ... STATIC mp_obj_t audiomixer_mixer_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_voice_count, ARG_buffer_size, ARG_channel_count, ARG_bits_per_sample, ARG_samples_signed, ARG_sample_rate }; static const mp_arg_t allowed_args[] = { @@ -125,10 +125,9 @@ STATIC mp_obj_t audiomixer_mixer_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the Mixer and releases any hardware resources for reuse. -//| +//| def deinit(self, ) -> Any: +//| """Deinitialises the Mixer and releases any hardware resources for reuse.""" +//| ... STATIC mp_obj_t audiomixer_mixer_deinit(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiomixer_mixer_deinit(self); @@ -142,17 +141,15 @@ STATIC void check_for_deinit(audiomixer_mixer_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t audiomixer_mixer_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiomixer_mixer_deinit(args[0]); @@ -160,10 +157,9 @@ STATIC mp_obj_t audiomixer_mixer_obj___exit__(size_t n_args, const mp_obj_t *arg } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiomixer_mixer___exit___obj, 4, 4, audiomixer_mixer_obj___exit__); -//| .. attribute:: playing -//| -//| True when any voice is being output. (read-only) -//| +//| playing: Any = +//| """True when any voice is being output. (read-only)""" +//| ... STATIC mp_obj_t audiomixer_mixer_obj_get_playing(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -178,10 +174,9 @@ const mp_obj_property_t audiomixer_mixer_playing_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: sample_rate -//| -//| 32 bit value that dictates how quickly samples are played in Hertz (cycles per second). -//| +//| sample_rate: Any = +//| """32 bit value that dictates how quickly samples are played in Hertz (cycles per second).""" +//| ... STATIC mp_obj_t audiomixer_mixer_obj_get_sample_rate(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -196,14 +191,14 @@ const mp_obj_property_t audiomixer_mixer_sample_rate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: voice -//| -//| A tuple of the mixer's `audiomixer.MixerVoice` object(s). +//| voice: Any = +//| """A tuple of the mixer's `audiomixer.MixerVoice` object(s). //| -//| .. code-block:: python +//| .. code-block:: python //| -//| >>> mixer.voice -//| (,) +//| >>> mixer.voice +//| (,)""" +//| ... STATIC mp_obj_t audiomixer_mixer_obj_get_voice(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -218,15 +213,14 @@ const mp_obj_property_t audiomixer_mixer_voice_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: play(sample, *, voice=0, loop=False) +//| def play(self, sample: Any, *, voice: Any = 0, loop: Any = False) -> Any: +//| """Plays the sample once when loop=False and continuously when loop=True. +//| Does not block. Use `playing` to block. //| -//| Plays the sample once when loop=False and continuously when loop=True. -//| Does not block. Use `playing` to block. -//| -//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. -//| -//| The sample must match the Mixer's encoding settings given in the constructor. +//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. //| +//| The sample must match the Mixer's encoding settings given in the constructor.""" +//| ... STATIC mp_obj_t audiomixer_mixer_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_voice, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -251,10 +245,9 @@ STATIC mp_obj_t audiomixer_mixer_obj_play(size_t n_args, const mp_obj_t *pos_arg } MP_DEFINE_CONST_FUN_OBJ_KW(audiomixer_mixer_play_obj, 1, audiomixer_mixer_obj_play); -//| .. method:: stop_voice(voice=0) -//| -//| Stops playback of the sample on the given voice. -//| +//| def stop_voice(self, voice: Any = 0) -> Any: +//| """Stops playback of the sample on the given voice.""" +//| ... STATIC mp_obj_t audiomixer_mixer_obj_stop_voice(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_voice }; static const mp_arg_t allowed_args[] = { diff --git a/shared-bindings/audiomixer/MixerVoice.c b/shared-bindings/audiomixer/MixerVoice.c index 188f76f57..e6c750baf 100644 --- a/shared-bindings/audiomixer/MixerVoice.c +++ b/shared-bindings/audiomixer/MixerVoice.c @@ -37,17 +37,18 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: audiomixer +//|class MixerVoice: +//| """.. currentmodule:: audiomixer //| -//| :class:`MixerVoice` -- Voice objects used with Mixer -//| ===================================================== +//| :class:`MixerVoice` -- Voice objects used with Mixer +//| ===================================================== //| -//| Used to access and control samples with `audiomixer.Mixer`. +//| Used to access and control samples with `audiomixer.Mixer`.""" //| -//| .. class:: MixerVoice() -//| -//| MixerVoice instance object(s) created by `audiomixer.Mixer`. +//| def __init__(self, ): //| +//| """MixerVoice instance object(s) created by `audiomixer.Mixer`.""" +//| ... // TODO: support mono or stereo voices STATIC mp_obj_t audiomixer_mixervoice_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { audiomixer_mixervoice_obj_t *self = m_new_obj(audiomixer_mixervoice_obj_t); @@ -58,15 +59,14 @@ STATIC mp_obj_t audiomixer_mixervoice_make_new(const mp_obj_type_t *type, size_t return MP_OBJ_FROM_PTR(self); } -//| .. method:: play(sample, *, loop=False) -//| -//| Plays the sample once when ``loop=False``, and continuously when ``loop=True``. -//| Does not block. Use `playing` to block. -//| -//| Sample must be an `audiocore.WaveFile`, `audiomixer.Mixer` or `audiocore.RawSample`. +//| def play(self, sample: Any, *, loop: Any = False) -> Any: +//| """Plays the sample once when ``loop=False``, and continuously when ``loop=True``. +//| Does not block. Use `playing` to block. //| -//| The sample must match the `audiomixer.Mixer`'s encoding settings given in the constructor. +//| Sample must be an `audiocore.WaveFile`, `audiomixer.Mixer` or `audiocore.RawSample`. //| +//| The sample must match the `audiomixer.Mixer`'s encoding settings given in the constructor.""" +//| ... STATIC mp_obj_t audiomixer_mixervoice_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -83,10 +83,9 @@ STATIC mp_obj_t audiomixer_mixervoice_obj_play(size_t n_args, const mp_obj_t *po } MP_DEFINE_CONST_FUN_OBJ_KW(audiomixer_mixervoice_play_obj, 1, audiomixer_mixervoice_obj_play); -//| .. method:: stop() -//| -//| Stops playback of the sample on this voice. -//| +//| def stop(self, ) -> Any: +//| """Stops playback of the sample on this voice.""" +//| ... STATIC mp_obj_t audiomixer_mixervoice_obj_stop(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_voice }; static const mp_arg_t allowed_args[] = { @@ -102,10 +101,9 @@ STATIC mp_obj_t audiomixer_mixervoice_obj_stop(size_t n_args, const mp_obj_t *po } MP_DEFINE_CONST_FUN_OBJ_KW(audiomixer_mixervoice_stop_obj, 1, audiomixer_mixervoice_obj_stop); -//| .. attribute:: level() -//| -//| The volume level of a voice, as a floating point number between 0 and 1. -//| +//| level(): Any = +//| """The volume level of a voice, as a floating point number between 0 and 1.""" +//| ... STATIC mp_obj_t audiomixer_mixervoice_obj_get_level(mp_obj_t self_in) { return mp_obj_new_float(common_hal_audiomixer_mixervoice_get_level(self_in)); } @@ -139,10 +137,9 @@ const mp_obj_property_t audiomixer_mixervoice_level_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: playing -//| -//| True when this voice is being output. (read-only) -//| +//| playing: Any = +//| """True when this voice is being output. (read-only)""" +//| ... STATIC mp_obj_t audiomixer_mixervoice_obj_get_playing(mp_obj_t self_in) { audiomixer_mixervoice_obj_t *self = MP_OBJ_TO_PTR(self_in); -- cgit v1.2.3 From 829da5c12732337cc72f2c089bc72cb437a02e0c Mon Sep 17 00:00:00 2001 From: dherrada Date: Mon, 27 Apr 2020 17:29:50 -0400 Subject: Added inline pyi to audiomp3 --- shared-bindings/audiomp3/MP3Decoder.c | 113 ++++++++++++++++------------------ 1 file changed, 53 insertions(+), 60 deletions(-) diff --git a/shared-bindings/audiomp3/MP3Decoder.c b/shared-bindings/audiomp3/MP3Decoder.c index 224042212..0bb2c8829 100644 --- a/shared-bindings/audiomp3/MP3Decoder.c +++ b/shared-bindings/audiomp3/MP3Decoder.c @@ -34,42 +34,42 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: audiomp3 +//|class MP3: +//| """.. currentmodule:: audiomp3 //| -//| :class:`MP3Decoder` -- Load a mp3 file for audio playback -//| ========================================================= +//| :class:`MP3Decoder` -- Load a mp3 file for audio playback +//| ========================================================= //| -//| An object that decodes MP3 files for playback on an audio device. +//| An object that decodes MP3 files for playback on an audio device.""" //| -//| .. class:: MP3(file[, buffer]) +//| def __init__(self, file: typing.BinaryIO, buffer: bytearray): +//| """Load a .mp3 file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. //| -//| Load a .mp3 file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. +//| :param typing.BinaryIO file: Already opened mp3 file +//| :param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two buffers are allocated internally. The specific buffer size required depends on the mp3 file. //| -//| :param typing.BinaryIO file: Already opened mp3 file -//| :param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two buffers are allocated internally. The specific buffer size required depends on the mp3 file. //| +//| Playing a mp3 file from flash:: //| -//| Playing a mp3 file from flash:: +//| import board +//| import audiomp3 +//| import audioio +//| import digitalio //| -//| import board -//| import audiomp3 -//| import audioio -//| import digitalio +//| # Required for CircuitPlayground Express +//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) +//| speaker_enable.switch_to_output(value=True) //| -//| # Required for CircuitPlayground Express -//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) -//| speaker_enable.switch_to_output(value=True) -//| -//| data = open("cplay-16bit-16khz-64kbps.mp3", "rb") -//| mp3 = audiomp3.MP3Decoder(data) -//| a = audioio.AudioOut(board.A0) -//| -//| print("playing") -//| a.play(mp3) -//| while a.playing: -//| pass -//| print("stopped") +//| data = open("cplay-16bit-16khz-64kbps.mp3", "rb") +//| mp3 = audiomp3.MP3Decoder(data) +//| a = audioio.AudioOut(board.A0) //| +//| print("playing") +//| a.play(mp3) +//| while a.playing: +//| pass +//| print("stopped")""" +//| ... STATIC mp_obj_t audiomp3_mp3file_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 1, 2, false); @@ -92,10 +92,9 @@ STATIC mp_obj_t audiomp3_mp3file_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the MP3 and releases all memory resources for reuse. -//| +//| def deinit(self, ) -> Any: +//| """Deinitialises the MP3 and releases all memory resources for reuse.""" +//| ... STATIC mp_obj_t audiomp3_mp3file_deinit(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiomp3_mp3file_deinit(self); @@ -109,17 +108,16 @@ STATIC void check_for_deinit(audiomp3_mp3file_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. -//| +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: //| +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t audiomp3_mp3file_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiomp3_mp3file_deinit(args[0]); @@ -127,10 +125,9 @@ STATIC mp_obj_t audiomp3_mp3file_obj___exit__(size_t n_args, const mp_obj_t *arg } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiomp3_mp3file___exit___obj, 4, 4, audiomp3_mp3file_obj___exit__); -//| .. attribute:: file -//| -//| File to play back. -//| +//| file: Any = +//| """File to play back.""" +//| ... STATIC mp_obj_t audiomp3_mp3file_obj_get_file(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -158,12 +155,11 @@ const mp_obj_property_t audiomp3_mp3file_file_obj = { -//| .. attribute:: sample_rate -//| -//| 32 bit value that dictates how quickly samples are loaded into the DAC -//| in Hertz (cycles per second). When the sample is looped, this can change -//| the pitch output without changing the underlying sample. -//| +//| sample_rate: Any = +//| """32 bit value that dictates how quickly samples are loaded into the DAC +//| in Hertz (cycles per second). When the sample is looped, this can change +//| the pitch output without changing the underlying sample.""" +//| ... STATIC mp_obj_t audiomp3_mp3file_obj_get_sample_rate(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -186,10 +182,9 @@ const mp_obj_property_t audiomp3_mp3file_sample_rate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: bits_per_sample -//| -//| Bits per sample. (read only) -//| +//| bits_per_sample: Any = +//| """Bits per sample. (read only)""" +//| ... STATIC mp_obj_t audiomp3_mp3file_obj_get_bits_per_sample(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -204,10 +199,9 @@ const mp_obj_property_t audiomp3_mp3file_bits_per_sample_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: channel_count -//| -//| Number of audio channels. (read only) -//| +//| channel_count: Any = +//| """Number of audio channels. (read only)""" +//| ... STATIC mp_obj_t audiomp3_mp3file_obj_get_channel_count(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -222,10 +216,9 @@ const mp_obj_property_t audiomp3_mp3file_channel_count_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: rms_level -//| -//| The RMS audio level of a recently played moment of audio. (read only) -//| +//| rms_level: Any = +//| """The RMS audio level of a recently played moment of audio. (read only)""" +//| ... STATIC mp_obj_t audiomp3_mp3file_obj_get_rms_level(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); -- cgit v1.2.3 From 46713482f49690f96e55f872c087d245b4ce0489 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Mon, 27 Apr 2020 14:36:14 -0700 Subject: Add verification script --- Makefile | 4 ++-- tools/extract_pyi.py | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 48 insertions(+), 2 deletions(-) create mode 100644 tools/extract_pyi.py diff --git a/Makefile b/Makefile index 5e949cd40..aa8fc26d1 100644 --- a/Makefile +++ b/Makefile @@ -213,8 +213,8 @@ check-translate: locale/circuitpython.pot $(wildcard locale/*.po) $(PYTHON) tools/check_translations.py $^ stubs: - rst2pyi $(VALIDATE) shared-bindings/ $(STUBDIR) - python setup.py sdist + python tools/extract_pyi.py shared-bindings/ $(STUBDIR) + #python setup.py sdist update-frozen-libraries: @echo "Updating all frozen libraries to latest tagged version." diff --git a/tools/extract_pyi.py b/tools/extract_pyi.py new file mode 100644 index 000000000..c7f3e4604 --- /dev/null +++ b/tools/extract_pyi.py @@ -0,0 +1,46 @@ +import os +import sys +import astroid +import traceback + +top_level = sys.argv[1].strip("/") +stub_directory = sys.argv[2] + +if top_level.count("/") == 1: + top_level, module = top_level.split("/") + modules = [module] +else: + modules = os.listdir(top_level) + modules = sorted(modules) + +ok = 0 +total = 0 +for module in modules: + module_path = os.path.join(top_level, module) + if not os.path.isdir(module_path): + continue + pyi_lines = [] + for class_file in os.listdir(module_path): + class_path = os.path.join(module_path, class_file) + with open(class_path, "r") as f: + for line in f: + if line.startswith("//| "): + pyi_lines.append(line[4:]) + + stub_filename = os.path.join(stub_directory, module + ".pyi") + print(stub_filename) + stub_contents = "".join(pyi_lines) + with open(stub_filename, "w") as f: + f.write(stub_contents) + + # Validate that the module is a parseable stub. + total += 1 + try: + astroid.parse(stub_contents) + ok += 1 + except astroid.exceptions.AstroidSyntaxError as e: + e = e.__cause__ + traceback.print_exception(type(e), e, e.__traceback__) + print() + +print(f"{ok} ok out of {total}") -- cgit v1.2.3 From 724dcda3ec8319e961fb032e4bef2524c9bf6948 Mon Sep 17 00:00:00 2001 From: dherrada Date: Tue, 28 Apr 2020 18:39:58 -0400 Subject: Fixed whitespace in busio --- shared-bindings/busio/I2C.c | 178 ++++++++++++++++++------------------ shared-bindings/busio/OneWire.c | 86 ++++++++--------- shared-bindings/busio/SPI.c | 198 ++++++++++++++++++++-------------------- shared-bindings/busio/UART.c | 160 ++++++++++++++++---------------- 4 files changed, 311 insertions(+), 311 deletions(-) diff --git a/shared-bindings/busio/I2C.c b/shared-bindings/busio/I2C.c index 0cd392f9a..8b71be085 100644 --- a/shared-bindings/busio/I2C.c +++ b/shared-bindings/busio/I2C.c @@ -37,32 +37,32 @@ #include "supervisor/shared/translate.h" //|class I2C: -//| """.. currentmodule:: busio +//|""".. currentmodule:: busio //| -//| :class:`I2C` --- Two wire serial protocol -//| ------------------------------------------""" -//| def __init__(self, scl: microcontroller.Pin, sda: microcontroller.Pin, *, frequency: int = 400000, timeout: int = 255): -//| """I2C is a two-wire protocol for communicating between devices. At the -//| physical level it consists of 2 wires: SCL and SDA, the clock and data -//| lines respectively. +//|:class:`I2C` --- Two wire serial protocol +//|------------------------------------------""" +//|def __init__(self, scl: microcontroller.Pin, sda: microcontroller.Pin, *, frequency: int = 400000, timeout: int = 255): +//|"""I2C is a two-wire protocol for communicating between devices. At the +//|physical level it consists of 2 wires: SCL and SDA, the clock and data +//|lines respectively. //| -//| .. seealso:: Using this class directly requires careful lock management. -//| Instead, use :class:`~adafruit_bus_device.i2c_device.I2CDevice` to -//| manage locks. +//|.. seealso:: Using this class directly requires careful lock management. +//|Instead, use :class:`~adafruit_bus_device.i2c_device.I2CDevice` to +//|manage locks. //| -//| .. seealso:: Using this class to directly read registers requires manual -//| bit unpacking. Instead, use an existing driver or make one with -//| :ref:`Register ` data descriptors. +//|.. seealso:: Using this class to directly read registers requires manual +//|bit unpacking. Instead, use an existing driver or make one with +//|:ref:`Register ` data descriptors. //| -//| :param ~microcontroller.Pin scl: The clock pin -//| :param ~microcontroller.Pin sda: The data pin -//| :param int frequency: The clock frequency in Hertz -//| :param int timeout: The maximum clock stretching timeut - (used only for bitbangio.I2C; ignored for busio.I2C) +//|:param ~microcontroller.Pin scl: The clock pin +//|:param ~microcontroller.Pin sda: The data pin +//|:param int frequency: The clock frequency in Hertz +//|:param int timeout: The maximum clock stretching timeut - (used only for bitbangio.I2C; ignored for busio.I2C) //| -//| .. note:: On the nRF52840, only one I2C object may be created, -//| except on the Circuit Playground Bluefruit, which allows two, -//| one for the onboard accelerometer, and one for offboard use.""" -//| ... +//|.. note:: On the nRF52840, only one I2C object may be created, +//|except on the Circuit Playground Bluefruit, which allows two, +//|one for the onboard accelerometer, and one for offboard use.""" +//|... STATIC mp_obj_t busio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { busio_i2c_obj_t *self = m_new_obj(busio_i2c_obj_t); self->base.type = &busio_i2c_type; @@ -83,9 +83,9 @@ STATIC mp_obj_t busio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, con return (mp_obj_t)self; } -//| def deinit(self, ) -> Any: -//| """Releases control of the underlying hardware so other classes can use it.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Releases control of the underlying hardware so other classes can use it.""" +//|... STATIC mp_obj_t busio_i2c_obj_deinit(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_i2c_deinit(self); @@ -99,15 +99,15 @@ STATIC void check_for_deinit(busio_i2c_obj_t *self) { } } -//| def __enter__(self, ) -> Any: -//| """No-op used in Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used in Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware on context exit. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware on context exit. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t busio_i2c_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_i2c_deinit(args[0]); @@ -122,13 +122,13 @@ static void check_lock(busio_i2c_obj_t *self) { } } -//| def scan(self, ) -> Any: -//| """Scan all I2C addresses between 0x08 and 0x77 inclusive and return a -//| list of those that respond. +//|def scan(self, ) -> Any: +//|"""Scan all I2C addresses between 0x08 and 0x77 inclusive and return a +//|list of those that respond. //| -//| :return: List of device ids on the I2C bus -//| :rtype: list""" -//| ... +//|:return: List of device ids on the I2C bus +//|:rtype: list""" +//|... STATIC mp_obj_t busio_i2c_scan(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -145,11 +145,11 @@ STATIC mp_obj_t busio_i2c_scan(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_scan_obj, busio_i2c_scan); -//| def try_lock(self, ) -> Any: -//| """Attempts to grab the I2C lock. Returns True on success. -//| :return: True when lock has been grabbed -//| :rtype: bool""" -//| ... +//|def try_lock(self, ) -> Any: +//|"""Attempts to grab the I2C lock. Returns True on success. +//|:return: True when lock has been grabbed +//|:rtype: bool""" +//|... STATIC mp_obj_t busio_i2c_obj_try_lock(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -157,9 +157,9 @@ STATIC mp_obj_t busio_i2c_obj_try_lock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_try_lock_obj, busio_i2c_obj_try_lock); -//| def unlock(self, ) -> Any: -//| """Releases the I2C lock.""" -//| ... +//|def unlock(self, ) -> Any: +//|"""Releases the I2C lock.""" +//|... STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -168,20 +168,20 @@ STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_unlock_obj, busio_i2c_obj_unlock); -//| def readfrom_into(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None) -> Any: -//| """Read into ``buffer`` from the slave specified by ``address``. -//| The number of bytes read will be the length of ``buffer``. -//| At least one byte must be read. +//|def readfrom_into(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None) -> Any: +//|"""Read into ``buffer`` from the slave specified by ``address``. +//|The number of bytes read will be the length of ``buffer``. +//|At least one byte must be read. //| -//| If ``start`` or ``end`` is provided, then the buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like -//| ``buf[start:end]`` will so it saves memory. +//|If ``start`` or ``end`` is provided, then the buffer will be sliced +//|as if ``buffer[start:end]``. This will not cause an allocation like +//|``buf[start:end]`` will so it saves memory. //| -//| :param int address: 7-bit device address -//| :param bytearray buffer: buffer to write into -//| :param int start: Index to start writing at -//| :param int end: Index to write up to but not include. Defaults to ``len(buffer)``""" -//| ... +//|:param int address: 7-bit device address +//|:param bytearray buffer: buffer to write into +//|:param int start: Index to start writing at +//|:param int end: Index to write up to but not include. Defaults to ``len(buffer)``""" +//|... // Shared arg parsing for readfrom_into and writeto_then_readfrom. STATIC void readfrom(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end) { mp_buffer_info_t bufinfo; @@ -219,26 +219,26 @@ STATIC mp_obj_t busio_i2c_readfrom_into(size_t n_args, const mp_obj_t *pos_args, } MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_readfrom_into_obj, 3, busio_i2c_readfrom_into); -//| def writeto(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None, stop: bool = True) -> Any: -//| """Write the bytes from ``buffer`` to the slave specified by ``address``. -//| Transmits a stop bit when stop is True. Setting stop=False is deprecated and stop will be -//| removed in CircuitPython 6.x. Use `writeto_then_readfrom` when needing a write, no stop and -//| repeated start before a read. +//|def writeto(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None, stop: bool = True) -> Any: +//|"""Write the bytes from ``buffer`` to the slave specified by ``address``. +//|Transmits a stop bit when stop is True. Setting stop=False is deprecated and stop will be +//|removed in CircuitPython 6.x. Use `writeto_then_readfrom` when needing a write, no stop and +//|repeated start before a read. //| -//| If ``start`` or ``end`` is provided, then the buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like -//| ``buffer[start:end]`` will so it saves memory. +//|If ``start`` or ``end`` is provided, then the buffer will be sliced +//|as if ``buffer[start:end]``. This will not cause an allocation like +//|``buffer[start:end]`` will so it saves memory. //| -//| Writing a buffer or slice of length zero is permitted, as it can be used -//| to poll for the existence of a device. +//|Writing a buffer or slice of length zero is permitted, as it can be used +//|to poll for the existence of a device. //| -//| :param int address: 7-bit device address -//| :param bytearray buffer: buffer containing the bytes to write -//| :param int start: Index to start writing from -//| :param int end: Index to read up to but not include. Defaults to ``len(buffer)`` -//| :param bool stop: If true, output an I2C stop condition after the buffer is written. -//| Deprecated. Will be removed in 6.x and act as stop=True.""" -//| ... +//|:param int address: 7-bit device address +//|:param bytearray buffer: buffer containing the bytes to write +//|:param int start: Index to start writing from +//|:param int end: Index to read up to but not include. Defaults to ``len(buffer)`` +//|:param bool stop: If true, output an I2C stop condition after the buffer is written. +//|Deprecated. Will be removed in 6.x and act as stop=True.""" +//|... // Shared arg parsing for writeto and writeto_then_readfrom. STATIC void writeto(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end, bool stop) { // get the buffer to write the data from @@ -277,23 +277,23 @@ STATIC mp_obj_t busio_i2c_writeto(size_t n_args, const mp_obj_t *pos_args, mp_ma } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_writeto_obj, 1, busio_i2c_writeto); -//| def writeto_then_readfrom(self, address: int, out_buffer: bytearray, in_buffer: bytearray, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> Any: -//| """Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop -//| bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and -//| ``in_buffer`` can be the same buffer because they are used sequentially. +//|def writeto_then_readfrom(self, address: int, out_buffer: bytearray, in_buffer: bytearray, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> Any: +//|"""Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop +//|bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and +//|``in_buffer`` can be the same buffer because they are used sequentially. //| -//| If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]`` -//| will so it saves memory. +//|If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced +//|as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]`` +//|will so it saves memory. //| -//| :param int address: 7-bit device address -//| :param bytearray out_buffer: buffer containing the bytes to write -//| :param bytearray in_buffer: buffer to write into -//| :param int out_start: Index to start writing from -//| :param int out_end: Index to read up to but not include. Defaults to ``len(buffer)`` -//| :param int in_start: Index to start writing at -//| :param int in_end: Index to write up to but not include. Defaults to ``len(buffer)``""" -//| ... +//|:param int address: 7-bit device address +//|:param bytearray out_buffer: buffer containing the bytes to write +//|:param bytearray in_buffer: buffer to write into +//|:param int out_start: Index to start writing from +//|:param int out_end: Index to read up to but not include. Defaults to ``len(buffer)`` +//|:param int in_start: Index to start writing at +//|:param int in_end: Index to write up to but not include. Defaults to ``len(buffer)``""" +//|... STATIC mp_obj_t busio_i2c_writeto_then_readfrom(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_address, ARG_out_buffer, ARG_in_buffer, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; static const mp_arg_t allowed_args[] = { diff --git a/shared-bindings/busio/OneWire.c b/shared-bindings/busio/OneWire.c index dd4410d46..d6af32bd9 100644 --- a/shared-bindings/busio/OneWire.c +++ b/shared-bindings/busio/OneWire.c @@ -35,35 +35,35 @@ #include "shared-bindings/util.h" //|class OneWire: -//| """.. currentmodule:: busio +//|""".. currentmodule:: busio //| -//| :class:`OneWire` -- Lowest-level of the Maxim OneWire protocol -//| =================================================================""" +//|:class:`OneWire` -- Lowest-level of the Maxim OneWire protocol +//|=================================================================""" //| -//| def __init__(self, pin: microcontroller.Pin): -//| """:class:`~busio.OneWire` implements the timing-sensitive foundation of the Maxim -//| (formerly Dallas Semi) OneWire protocol. +//|__init__(self, pin: microcontroller.Pin): +//|""":class:`~busio.OneWire` implements the timing-sensitive foundation of the Maxim +//|(formerly Dallas Semi) OneWire protocol. //| -//| Protocol definition is here: https://www.maximintegrated.com/en/app-notes/index.mvp/id/126 +//|Protocol definition is here: https://www.maximintegrated.com/en/app-notes/index.mvp/id/126 //| -//| .. class:: OneWire(pin) +//|.. class:: OneWire(pin) //| -//| Create a OneWire object associated with the given pin. The object -//| implements the lowest level timing-sensitive bits of the protocol. +//|Create a OneWire object associated with the given pin. The object +//|implements the lowest level timing-sensitive bits of the protocol. //| -//| :param ~microcontroller.Pin pin: Pin connected to the OneWire bus +//|:param ~microcontroller.Pin pin: Pin connected to the OneWire bus //| -//| Read a short series of pulses:: +//|Read a short series of pulses:: //| -//| import busio -//| import board +//|import busio +//|import board //| -//| onewire = busio.OneWire(board.D7) -//| onewire.reset() -//| onewire.write_bit(True) -//| onewire.write_bit(False) -//| print(onewire.read_bit())""" -//| ... +//|onewire = busio.OneWire(board.D7) +//|onewire.reset() +//|onewire.write_bit(True) +//|onewire.write_bit(False) +//|print(onewire.read_bit())""" +//|... STATIC mp_obj_t busio_onewire_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_pin }; static const mp_arg_t allowed_args[] = { @@ -80,9 +80,9 @@ STATIC mp_obj_t busio_onewire_make_new(const mp_obj_type_t *type, size_t n_args, return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Deinitialize the OneWire bus and release any hardware resources for reuse.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Deinitialize the OneWire bus and release any hardware resources for reuse.""" +//|... STATIC mp_obj_t busio_onewire_deinit(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_onewire_deinit(self); @@ -96,15 +96,15 @@ STATIC void check_for_deinit(busio_onewire_obj_t *self) { } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware when exiting a context. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t busio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_onewire_deinit(args[0]); @@ -112,12 +112,12 @@ STATIC mp_obj_t busio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_onewire___exit___obj, 4, 4, busio_onewire_obj___exit__); -//| def reset(self, ) -> Any: -//| """Reset the OneWire bus and read presence +//|def reset(self, ) -> Any: +//|"""Reset the OneWire bus and read presence //| -//| :returns: False when at least one device is present -//| :rtype: bool""" -//| ... +//|:returns: False when at least one device is present +//|:rtype: bool""" +//|... STATIC mp_obj_t busio_onewire_obj_reset(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -126,12 +126,12 @@ STATIC mp_obj_t busio_onewire_obj_reset(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_reset_obj, busio_onewire_obj_reset); -//| def read_bit(self, ) -> Any: -//| """Read in a bit +//|def read_bit(self, ) -> Any: +//|"""Read in a bit //| -//| :returns: bit state read -//| :rtype: bool""" -//| ... +//|:returns: bit state read +//|:rtype: bool""" +//|... STATIC mp_obj_t busio_onewire_obj_read_bit(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -140,9 +140,9 @@ STATIC mp_obj_t busio_onewire_obj_read_bit(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_read_bit_obj, busio_onewire_obj_read_bit); -//| def write_bit(self, value: Any) -> Any: -//| """Write out a bit based on value.""" -//| ... +//|def write_bit(self, value: Any) -> Any: +//|"""Write out a bit based on value.""" +//|... STATIC mp_obj_t busio_onewire_obj_write_bit(mp_obj_t self_in, mp_obj_t bool_obj) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/busio/SPI.c b/shared-bindings/busio/SPI.c index 1ac9629f8..5643b0d04 100644 --- a/shared-bindings/busio/SPI.c +++ b/shared-bindings/busio/SPI.c @@ -42,42 +42,42 @@ //|class SPI: -//| """.. currentmodule:: busio +//|""".. currentmodule:: busio //| -//| `SPI` -- a 3-4 wire serial protocol -//| ----------------------------------------------- +//|`SPI` -- a 3-4 wire serial protocol +//|----------------------------------------------- //| -//| SPI is a serial protocol that has exclusive pins for data in and out of the -//| master. It is typically faster than :py:class:`~busio.I2C` because a -//| separate pin is used to control the active slave rather than a transitted -//| address. This class only manages three of the four SPI lines: `!clock`, -//| `!MOSI`, `!MISO`. Its up to the client to manage the appropriate slave -//| select line. (This is common because multiple slaves can share the `!clock`, -//| `!MOSI` and `!MISO` lines and therefore the hardware.)""" +//|SPI is a serial protocol that has exclusive pins for data in and out of the +//|master. It is typically faster than :py:class:`~busio.I2C` because a +//|separate pin is used to control the active slave rather than a transitted +//|address. This class only manages three of the four SPI lines: `!clock`, +//|`!MOSI`, `!MISO`. Its up to the client to manage the appropriate slave +//|select line. (This is common because multiple slaves can share the `!clock`, +//|`!MOSI` and `!MISO` lines and therefore the hardware.)""" //| -//| def __init__(self, clock: microcontroller.Pin, MOSI: microcontroller.Pin = None, MISO: microcontroller.Pin = None): +//|def __init__(self, clock: microcontroller.Pin, MOSI: microcontroller.Pin = None, MISO: microcontroller.Pin = None): //| -//| """Construct an SPI object on the given pins. +//|"""Construct an SPI object on the given pins. //| -//| ..note:: The SPI peripherals allocated in order of desirability, if possible, -//| such as highest speed and not shared use first. For instance, on the nRF52840, -//| there is a single 32MHz SPI peripheral, and multiple 8MHz peripherals, -//| some of which may also be used for I2C. The 32MHz SPI peripheral is returned -//| first, then the exclusive 8MHz SPI peripheral, and finally the shared 8MHz -//| peripherals. +//|..note:: The SPI peripherals allocated in order of desirability, if possible, +//|such as highest speed and not shared use first. For instance, on the nRF52840, +//|there is a single 32MHz SPI peripheral, and multiple 8MHz peripherals, +//|some of which may also be used for I2C. The 32MHz SPI peripheral is returned +//|first, then the exclusive 8MHz SPI peripheral, and finally the shared 8MHz +//|peripherals. //| -//| .. seealso:: Using this class directly requires careful lock management. -//| Instead, use :class:`~adafruit_bus_device.spi_device.SPIDevice` to -//| manage locks. +//|.. seealso:: Using this class directly requires careful lock management. +//|Instead, use :class:`~adafruit_bus_device.spi_device.SPIDevice` to +//|manage locks. //| -//| .. seealso:: Using this class to directly read registers requires manual -//| bit unpacking. Instead, use an existing driver or make one with -//| :ref:`Register ` data descriptors. +//|.. seealso:: Using this class to directly read registers requires manual +//|bit unpacking. Instead, use an existing driver or make one with +//|:ref:`Register ` data descriptors. //| -//| :param ~microcontroller.Pin clock: the pin to use for the clock. -//| :param ~microcontroller.Pin MOSI: the Master Out Slave In pin. -//| :param ~microcontroller.Pin MISO: the Master In Slave Out pin.""" -//| ... +//|:param ~microcontroller.Pin clock: the pin to use for the clock. +//|:param ~microcontroller.Pin MOSI: the Master Out Slave In pin. +//|:param ~microcontroller.Pin MISO: the Master In Slave Out pin.""" +//|... // TODO(tannewt): Support LSB SPI. @@ -101,9 +101,9 @@ STATIC mp_obj_t busio_spi_make_new(const mp_obj_type_t *type, size_t n_args, con return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Turn off the SPI bus.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Turn off the SPI bus.""" +//|... STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_spi_deinit(self); @@ -111,15 +111,15 @@ STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_deinit_obj, busio_spi_obj_deinit); -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers. -//| Provided by context manager helper.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers. +//|Provided by context manager helper.""" +//|... -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware when exiting a context. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t busio_spi_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_spi_deinit(args[0]); @@ -140,28 +140,28 @@ STATIC void check_for_deinit(busio_spi_obj_t *self) { } } -//| def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: -//| """Configures the SPI bus. The SPI object must be locked. +//|def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: +//|"""Configures the SPI bus. The SPI object must be locked. //| -//| :param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower -//| due to the granularity of available clock settings. -//| Check the `frequency` attribute for the actual clock rate. -//| :param int polarity: the base state of the clock line (0 or 1) -//| :param int phase: the edge of the clock that data is captured. First (0) -//| or second (1). Rising or falling depends on clock polarity. -//| :param int bits: the number of bits per word +//|:param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower +//|due to the granularity of available clock settings. +//|Check the `frequency` attribute for the actual clock rate. +//|:param int polarity: the base state of the clock line (0 or 1) +//|:param int phase: the edge of the clock that data is captured. First (0) +//|or second (1). Rising or falling depends on clock polarity. +//|:param int bits: the number of bits per word //| -//| .. note:: On the SAMD21, it is possible to set the baudrate to 24 MHz, but that -//| speed is not guaranteed to work. 12 MHz is the next available lower speed, and is -//| within spec for the SAMD21. +//|.. note:: On the SAMD21, it is possible to set the baudrate to 24 MHz, but that +//|speed is not guaranteed to work. 12 MHz is the next available lower speed, and is +//|within spec for the SAMD21. //| -//| .. note:: On the nRF52840, these baudrates are available: 125kHz, 250kHz, 1MHz, 2MHz, 4MHz, -//| and 8MHz. -//| If you pick a a baudrate other than one of these, the nearest lower -//| baudrate will be chosen, with a minimum of 125kHz. -//| Two SPI objects may be created, except on the Circuit Playground Bluefruit, -//| which allows only one (to allow for an additional I2C object).""" -//| ... +//|.. note:: On the nRF52840, these baudrates are available: 125kHz, 250kHz, 1MHz, 2MHz, 4MHz, +//|and 8MHz. +//|If you pick a a baudrate other than one of these, the nearest lower +//|baudrate will be chosen, with a minimum of 125kHz. +//|Two SPI objects may be created, except on the Circuit Playground Bluefruit, +//|which allows only one (to allow for an additional I2C object).""" +//|... STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_baudrate, ARG_polarity, ARG_phase, ARG_bits }; @@ -198,12 +198,12 @@ STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_ } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_configure_obj, 1, busio_spi_configure); -//| def try_lock(self, ) -> Any: -//| """Attempts to grab the SPI lock. Returns True on success. +//|def try_lock(self, ) -> Any: +//|"""Attempts to grab the SPI lock. Returns True on success. //| -//| :return: True when lock has been grabbed -//| :rtype: bool""" -//| ... +//|:return: True when lock has been grabbed +//|:rtype: bool""" +//|... STATIC mp_obj_t busio_spi_obj_try_lock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -211,9 +211,9 @@ STATIC mp_obj_t busio_spi_obj_try_lock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_try_lock_obj, busio_spi_obj_try_lock); -//| def unlock(self, ) -> Any: -//| """Releases the SPI lock.""" -//| ... +//|unlock(self, ) -> Any: +//|"""Releases the SPI lock.""" +//|... STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -223,14 +223,14 @@ STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_unlock_obj, busio_spi_obj_unlock); -//| def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any: ... -//| """Write the data contained in ``buffer``. The SPI object must be locked. -//| If the buffer is empty, nothing happens. +//|def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any: ... +//|"""Write the data contained in ``buffer``. The SPI object must be locked. +//|If the buffer is empty, nothing happens. //| -//| :param bytearray buffer: Write out the data in this buffer -//| :param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]`` -//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``""" -//| ... +//|:param bytearray buffer: Write out the data in this buffer +//|:param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]`` +//|:param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``""" +//|... STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end }; @@ -264,16 +264,16 @@ STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_ MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_obj, 2, busio_spi_write); -//| def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any: -//| """Read into ``buffer`` while writing ``write_value`` for each byte read. -//| The SPI object must be locked. -//| If the number of bytes to read is 0, nothing happens. +//|def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any: +//|"""Read into ``buffer`` while writing ``write_value`` for each byte read. +//|The SPI object must be locked. +//|If the number of bytes to read is 0, nothing happens. //| -//| :param bytearray buffer: Read data into this buffer -//| :param int start: Start of the slice of ``buffer`` to read into: ``buffer[start:end]`` -//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` -//| :param int write_value: Value to write while reading. (Usually ignored.)""" -//| ... +//|:param bytearray buffer: Read data into this buffer +//|:param int start: Start of the slice of ``buffer`` to read into: ``buffer[start:end]`` +//|:param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` +//|:param int write_value: Value to write while reading. (Usually ignored.)""" +//|... STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end, ARG_write_value }; @@ -307,20 +307,20 @@ STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_m } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_readinto_obj, 2, busio_spi_readinto); -//| def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: -//| """Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``. -//| The SPI object must be locked. -//| The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]`` -//| must be equal. -//| If buffer slice lengths are both 0, nothing happens. +//|def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: +//|"""Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``. +//|The SPI object must be locked. +//|The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]`` +//|must be equal. +//|If buffer slice lengths are both 0, nothing happens. //| -//| :param bytearray buffer_out: Write out the data in this buffer -//| :param bytearray buffer_in: Read data into this buffer -//| :param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]`` -//| :param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)`` -//| :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` -//| :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``""" -//| ... +//|:param bytearray buffer_out: Write out the data in this buffer +//|:param bytearray buffer_in: Read data into this buffer +//|:param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]`` +//|:param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)`` +//|:param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` +//|:param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``""" +//|... STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer_out, ARG_buffer_in, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; @@ -369,10 +369,10 @@ STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_readinto_obj, 2, busio_spi_write_readinto); -//| frequency: Any = -//| """The actual SPI bus frequency. This may not match the frequency requested -//| due to internal limitations.""" -//| ... +//|frequency: Any = +//|"""The actual SPI bus frequency. This may not match the frequency requested +//|due to internal limitations.""" +//|... STATIC mp_obj_t busio_spi_obj_get_frequency(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/busio/UART.c b/shared-bindings/busio/UART.c index 954cbdd20..b89b331af 100644 --- a/shared-bindings/busio/UART.c +++ b/shared-bindings/busio/UART.c @@ -40,30 +40,30 @@ #include "supervisor/shared/translate.h" //|class UART: -//| """.. currentmodule:: busio +//|""".. currentmodule:: busio //| -//| :class:`UART` -- a bidirectional serial protocol -//| =================================================""" -//| def __init__(self, tx: microcontroller.Pin, rx: microcontroller.Pin, *, baudrate: int = 9600, bits: int = 8, parity: Parity = None, stop: int = 1, timeout: float = 1, receiver_buffer_size: int = 64): -//| """A common bidirectional serial protocol that uses an an agreed upon speed -//| rather than a shared clock line. +//|:class:`UART` -- a bidirectional serial protocol +//|=================================================""" +//|def __init__(self, tx: microcontroller.Pin, rx: microcontroller.Pin, *, baudrate: int = 9600, bits: int = 8, parity: Parity = None, stop: int = 1, timeout: float = 1, receiver_buffer_size: int = 64): +//|"""A common bidirectional serial protocol that uses an an agreed upon speed +//|rather than a shared clock line. //| -//| :param ~microcontroller.Pin tx: the pin to transmit with, or ``None`` if this ``UART`` is receive-only. -//| :param ~microcontroller.Pin rx: the pin to receive on, or ``None`` if this ``UART`` is transmit-only. -//| :param ~microcontroller.Pin rts: the pin for rts, or ``None`` if rts not in use. -//| :param ~microcontroller.Pin cts: the pin for cts, or ``None`` if cts not in use. -//| :param ~microcontroller.Pin rs485_dir: the pin for rs485 direction setting, or ``None`` if rs485 not in use. -//| :param bool rs485_invert: set to invert the sense of the rs485_dir pin. -//| :param int baudrate: the transmit and receive speed. -//| :param int bits: the number of bits per byte, 7, 8 or 9. -//| :param Parity parity: the parity used for error checking. -//| :param int stop: the number of stop bits, 1 or 2. -//| :param float timeout: the timeout in seconds to wait for the first character and between subsequent characters when reading. Raises ``ValueError`` if timeout >100 seconds. -//| :param int receiver_buffer_size: the character length of the read buffer (0 to disable). (When a character is 9 bits the buffer will be 2 * receiver_buffer_size bytes.) +//|:param ~microcontroller.Pin tx: the pin to transmit with, or ``None`` if this ``UART`` is receive-only. +//|:param ~microcontroller.Pin rx: the pin to receive on, or ``None`` if this ``UART`` is transmit-only. +//|:param ~microcontroller.Pin rts: the pin for rts, or ``None`` if rts not in use. +//|:param ~microcontroller.Pin cts: the pin for cts, or ``None`` if cts not in use. +//|:param ~microcontroller.Pin rs485_dir: the pin for rs485 direction setting, or ``None`` if rs485 not in use. +//|:param bool rs485_invert: set to invert the sense of the rs485_dir pin. +//|:param int baudrate: the transmit and receive speed. +//|:param int bits: the number of bits per byte, 7, 8 or 9. +//|:param Parity parity: the parity used for error checking. +//|:param int stop: the number of stop bits, 1 or 2. +//|:param float timeout: the timeout in seconds to wait for the first character and between subsequent characters when reading. Raises ``ValueError`` if timeout >100 seconds. +//|:param int receiver_buffer_size: the character length of the read buffer (0 to disable). (When a character is 9 bits the buffer will be 2 * receiver_buffer_size bytes.) //| -//| *New in CircuitPython 4.0:* ``timeout`` has incompatibly changed units from milliseconds to seconds. -//| The new upper limit on ``timeout`` is meant to catch mistaken use of milliseconds.""" -//| ... +//|*New in CircuitPython 4.0:* ``timeout`` has incompatibly changed units from milliseconds to seconds. +//|The new upper limit on ``timeout`` is meant to catch mistaken use of milliseconds.""" +//|... typedef struct { mp_obj_base_t base; } busio_uart_parity_obj_t; @@ -141,9 +141,9 @@ STATIC mp_obj_t busio_uart_make_new(const mp_obj_type_t *type, size_t n_args, co return (mp_obj_t)self; } -//| def deinit(self, ) -> Any: -//| """Deinitialises the UART and releases any hardware resources for reuse.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Deinitialises the UART and releases any hardware resources for reuse.""" +//|... STATIC mp_obj_t busio_uart_obj_deinit(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_uart_deinit(self); @@ -157,15 +157,15 @@ STATIC void check_for_deinit(busio_uart_obj_t *self) { } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware when exiting a context. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t busio_uart_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_uart_deinit(args[0]); @@ -175,46 +175,46 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_ // These are standard stream methods. Code is in py/stream.c. // -//| def read(self, nbytes: Any = None) -> Any: -//| """Read characters. If ``nbytes`` is specified then read at most that many -//| bytes. Otherwise, read everything that arrives until the connection -//| times out. Providing the number of bytes expected is highly recommended -//| because it will be faster. +//|def read(self, nbytes: Any = None) -> Any: +//|"""Read characters. If ``nbytes`` is specified then read at most that many +//|bytes. Otherwise, read everything that arrives until the connection +//|times out. Providing the number of bytes expected is highly recommended +//|because it will be faster. //| -//| :return: Data read -//| :rtype: bytes or None""" -//| ... +//|:return: Data read +//|:rtype: bytes or None""" +//|... -//| def readinto(self, buf: Any) -> Any: -//| """.. method:: readinto(buf) +//|def readinto(self, buf: Any) -> Any: +//|""".. method:: readinto(buf) //| -//| Read bytes into the ``buf``. Read at most ``len(buf)`` bytes. +//|Read bytes into the ``buf``. Read at most ``len(buf)`` bytes. //| -//| :return: number of bytes read and stored into ``buf`` -//| :rtype: int or None (on a non-blocking error) +//|:return: number of bytes read and stored into ``buf`` +//|:rtype: int or None (on a non-blocking error) //| -//| *New in CircuitPython 4.0:* No length parameter is permitted.""" -//| ... +//|*New in CircuitPython 4.0:* No length parameter is permitted.""" +//|... -//| def readline(self, ) -> Any: -//| """.. method:: readline() +//|def readline(self, ) -> Any: +//|""".. method:: readline() //| -//| Read a line, ending in a newline character. +//|Read a line, ending in a newline character. //| -//| :return: the line read -//| :rtype: int or None""" -//| ... +//|:return: the line read +//|:rtype: int or None""" +//|... -//| def write(self, buf: Any) -> Any: -//| """.. method:: write(buf) +//|def write(self, buf: Any) -> Any: +//|""".. method:: write(buf) //| -//| Write the buffer of bytes to the bus. +//|Write the buffer of bytes to the bus. //| -//| *New in CircuitPython 4.0:* ``buf`` must be bytes, not a string. +//|*New in CircuitPython 4.0:* ``buf`` must be bytes, not a string. //| -//| :return: the number of bytes written -//| :rtype: int or None""" -//| ... +//|:return: the number of bytes written +//|:rtype: int or None""" +//|... // These three methods are used by the shared stream methods. STATIC mp_uint_t busio_uart_read(mp_obj_t self_in, void *buf_in, mp_uint_t size, int *errcode) { @@ -258,9 +258,9 @@ STATIC mp_uint_t busio_uart_ioctl(mp_obj_t self_in, mp_uint_t request, mp_uint_t return ret; } -//| baudrate: Any = -//| """The current baudrate.""" -//| ... +//|baudrate: Any = +//|"""The current baudrate.""" +//|... STATIC mp_obj_t busio_uart_obj_get_baudrate(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -284,9 +284,9 @@ const mp_obj_property_t busio_uart_baudrate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| in_waiting: Any = -//| """The number of bytes in the input buffer, available to be read""" -//| ... +//|in_waiting: Any = +//|"""The number of bytes in the input buffer, available to be read""" +//|... STATIC mp_obj_t busio_uart_obj_get_in_waiting(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -301,9 +301,9 @@ const mp_obj_property_t busio_uart_in_waiting_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| timeout: Any = -//| """The current timeout, in seconds (float).""" -//| ... +//|timeout: Any = +//|"""The current timeout, in seconds (float).""" +//|... STATIC mp_obj_t busio_uart_obj_get_timeout(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -329,9 +329,9 @@ const mp_obj_property_t busio_uart_timeout_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| def reset_input_buffer(self, ) -> Any: -//| """Discard any unread characters in the input buffer.""" -//| ... +//|def reset_input_buffer(self, ) -> Any: +//|"""Discard any unread characters in the input buffer.""" +//|... STATIC mp_obj_t busio_uart_obj_reset_input_buffer(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -341,15 +341,15 @@ STATIC mp_obj_t busio_uart_obj_reset_input_buffer(mp_obj_t self_in) { STATIC MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_reset_input_buffer_obj, busio_uart_obj_reset_input_buffer); //|class busio: -//| def __init__(self, ): -//| """Enum-like class to define the parity used to verify correct data transfer.""" -//| ODD: Any = -//| """Total number of ones should be odd.""" -//| ... -//| EVEN: Any = -//| """Total number of ones should be even.""" -//| ... -//| ... +//|def __init__(self, ): +//|"""Enum-like class to define the parity used to verify correct data transfer.""" +//|ODD: Any = +//|"""Total number of ones should be odd.""" +//|... +//|EVEN: Any = +//|"""Total number of ones should be even.""" +//|... +//|... const mp_obj_type_t busio_uart_parity_type; const busio_uart_parity_obj_t busio_uart_parity_odd_obj = { -- cgit v1.2.3 From c3897d0add969e0280e445a80eff34c6a2681592 Mon Sep 17 00:00:00 2001 From: dherrada Date: Tue, 28 Apr 2020 18:43:40 -0400 Subject: Fixed whitespace in analogio --- shared-bindings/analogio/AnalogIn.c | 62 ++++++++++++++++++------------------ shared-bindings/analogio/AnalogOut.c | 57 ++++++++++++++++----------------- 2 files changed, 59 insertions(+), 60 deletions(-) diff --git a/shared-bindings/analogio/AnalogIn.c b/shared-bindings/analogio/AnalogIn.c index a8afe75bd..9b6ac086b 100644 --- a/shared-bindings/analogio/AnalogIn.c +++ b/shared-bindings/analogio/AnalogIn.c @@ -37,24 +37,24 @@ #include "shared-bindings/util.h" //|class AnalogIn: -//| """:class:`AnalogIn` -- read analog voltage -//| ============================================ +//|""":class:`AnalogIn` -- read analog voltage +//|============================================ //| -//| Usage:: +//|Usage:: //| -//| import analogio -//| from board import * +//|import analogio +//|from board import * //| -//| adc = analogio.AnalogIn(A1) -//| val = adc.value""" +//|adc = analogio.AnalogIn(A1) +//|val = adc.value""" //| -//| def __init__(self, pin: microcontroller.Pin): +//|def __init__(self, pin: microcontroller.Pin): //| -//| """Use the AnalogIn on the given pin. The reference voltage varies by -//| platform so use ``reference_voltage`` to read the configured setting. +//|"""Use the AnalogIn on the given pin. The reference voltage varies by +//|platform so use ``reference_voltage`` to read the configured setting. //| -//| :param ~microcontroller.Pin pin: the pin to read from""" -//| ... +//|:param ~microcontroller.Pin pin: the pin to read from""" +//|... STATIC mp_obj_t analogio_analogin_make_new(const mp_obj_type_t *type, mp_uint_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { // check number of arguments @@ -70,9 +70,9 @@ STATIC mp_obj_t analogio_analogin_make_new(const mp_obj_type_t *type, return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Turn off the AnalogIn and release the pin for other use.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Turn off the AnalogIn and release the pin for other use.""" +//|... STATIC mp_obj_t analogio_analogin_deinit(mp_obj_t self_in) { analogio_analogin_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_analogio_analogin_deinit(self); @@ -85,15 +85,15 @@ STATIC void check_for_deinit(analogio_analogin_obj_t *self) { raise_deinited_error(); } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"Automatically deinitializes the hardware when exiting a context. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t analogio_analogin___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_analogio_analogin_deinit(args[0]); @@ -101,12 +101,12 @@ STATIC mp_obj_t analogio_analogin___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(analogio_analogin___exit___obj, 4, 4, analogio_analogin___exit__); -//| value: Any = -//| """The value on the analog pin between 0 and 65535 inclusive (16-bit). (read-only) +//|value: Any = +//|"""The value on the analog pin between 0 and 65535 inclusive (16-bit). (read-only) //| -//| Even if the underlying analog to digital converter (ADC) is lower -//| resolution, the value is 16-bit.""" -//| ... +//|Even if the underlying analog to digital converter (ADC) is lower +//|resolution, the value is 16-bit.""" +//|... STATIC mp_obj_t analogio_analogin_obj_get_value(mp_obj_t self_in) { analogio_analogin_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -121,10 +121,10 @@ const mp_obj_property_t analogio_analogin_value_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| reference_voltage: Any = -//| """The maximum voltage measurable (also known as the reference voltage) as a -//| `float` in Volts.""" -//| ... +//|reference_voltage: Any = +//|"""The maximum voltage measurable (also known as the reference voltage) as a +//|`float` in Volts.""" +//|... STATIC mp_obj_t analogio_analogin_obj_get_reference_voltage(mp_obj_t self_in) { analogio_analogin_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/analogio/AnalogOut.c b/shared-bindings/analogio/AnalogOut.c index 1b5808e6c..231668290 100644 --- a/shared-bindings/analogio/AnalogOut.c +++ b/shared-bindings/analogio/AnalogOut.c @@ -37,26 +37,25 @@ #include "supervisor/shared/translate.h" //|class AnalogOut: -//| """.. currentmodule:: analogio +//|""".. currentmodule:: analogio //| -//| :class:`AnalogOut` -- output analog voltage -//| ============================================ +//|:class:`AnalogOut` -- output analog voltage +//|============================================ //| -//| The AnalogOut is used to output analog values (a specific voltage). +//|The AnalogOut is used to output analog values (a specific voltage). //| -//| Example usage:: +//|Example usage:: //| -//| import analogio -//| from microcontroller import pin +//|import analogio +//|from microcontroller import pin //| -//| dac = analogio.AnalogOut(pin.PA02) # output on pin PA02 -//| dac.value = 32768 # makes PA02 1.65V""" -//| def __init__(self, pin: microcontroller.Pin): +//|dac = analogio.AnalogOut(pin.PA02) # output on pin PA02 +//|dac.value = 32768 # makes PA02 1.65V""" +//|def __init__(self, pin: microcontroller.Pin): +//|"""Use the AnalogOut on the given pin. //| -//| """Use the AnalogOut on the given pin. -//| -//| :param ~microcontroller.Pin pin: the pin to output to""" -//| ... +//|:param ~microcontroller.Pin pin: the pin to output to""" +//|... STATIC mp_obj_t analogio_analogout_make_new(const mp_obj_type_t *type, mp_uint_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { // check arguments mp_arg_check_num(n_args, kw_args, 1, 1, false); @@ -70,9 +69,9 @@ STATIC mp_obj_t analogio_analogout_make_new(const mp_obj_type_t *type, mp_uint_t return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Turn off the AnalogOut and release the pin for other use.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Turn off the AnalogOut and release the pin for other use.""" +//|... STATIC mp_obj_t analogio_analogout_deinit(mp_obj_t self_in) { analogio_analogout_obj_t *self = self_in; @@ -82,15 +81,15 @@ STATIC mp_obj_t analogio_analogout_deinit(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(analogio_analogout_deinit_obj, analogio_analogout_deinit); -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware when exiting a context. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t analogio_analogout___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_analogio_analogout_deinit(args[0]); @@ -98,12 +97,12 @@ STATIC mp_obj_t analogio_analogout___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(analogio_analogout___exit___obj, 4, 4, analogio_analogout___exit__); -//| value: Any = -//| """The value on the analog pin between 0 and 65535 inclusive (16-bit). (write-only) +//|value: Any = +//|"""The value on the analog pin between 0 and 65535 inclusive (16-bit). (write-only) //| -//| Even if the underlying digital to analog converter (DAC) is lower -//| resolution, the value is 16-bit.""" -//| ... +//|Even if the underlying digital to analog converter (DAC) is lower +//|resolution, the value is 16-bit.""" +//|... STATIC mp_obj_t analogio_analogout_obj_set_value(mp_obj_t self_in, mp_obj_t value) { analogio_analogout_obj_t *self = MP_OBJ_TO_PTR(self_in); if (common_hal_analogio_analogout_deinited(self)) { -- cgit v1.2.3 From aacca615988e29dd58b5083a0199f60f2f40a263 Mon Sep 17 00:00:00 2001 From: dherrada Date: Tue, 28 Apr 2020 18:56:19 -0400 Subject: Fixed whitespace on audiocore --- shared-bindings/audiocore/RawSample.c | 92 ++++++++++++++++----------------- shared-bindings/audiocore/WaveFile.c | 96 +++++++++++++++++------------------ 2 files changed, 94 insertions(+), 94 deletions(-) diff --git a/shared-bindings/audiocore/RawSample.c b/shared-bindings/audiocore/RawSample.c index b879b1b97..fdedfe959 100644 --- a/shared-bindings/audiocore/RawSample.c +++ b/shared-bindings/audiocore/RawSample.c @@ -36,44 +36,44 @@ #include "supervisor/shared/translate.h" //|class RawSample: -//| """.. currentmodule:: audiocore +//|""".. currentmodule:: audiocore //| -//| :class:`RawSample` -- A raw audio sample buffer -//| ======================================================== +//|:class:`RawSample` -- A raw audio sample buffer +//|======================================================== //| -//| An in-memory sound sample""" +//|An in-memory sound sample""" //| -//| def __init__(self, buffer: array.array, *, channel_count: int = 1, sample_rate: int = 8000): -//| """Create a RawSample based on the given buffer of signed values. If channel_count is more than -//| 1 then each channel's samples should alternate. In other words, for a two channel buffer, the -//| first sample will be for channel 1, the second sample will be for channel two, the third for -//| channel 1 and so on. +//|def __init__(self, buffer: array.array, *, channel_count: int = 1, sample_rate: int = 8000): +//|"""Create a RawSample based on the given buffer of signed values. If channel_count is more than +//|1 then each channel's samples should alternate. In other words, for a two channel buffer, the +//|first sample will be for channel 1, the second sample will be for channel two, the third for +//|channel 1 and so on. //| -//| :param array.array buffer: An `array.array` with samples -//| :param int channel_count: The number of channels in the buffer -//| :param int sample_rate: The desired playback sample rate +//|:param array.array buffer: An `array.array` with samples +//|:param int channel_count: The number of channels in the buffer +//|:param int sample_rate: The desired playback sample rate //| -//| Simple 8ksps 440 Hz sin wave:: +//|Simple 8ksps 440 Hz sin wave:: //| -//| import audiocore -//| import audioio -//| import board -//| import array -//| import time -//| import math +//|import audiocore +//|import audioio +//|import board +//|import array +//|import time +//|import math //| -//| # Generate one period of sine wav. -//| length = 8000 // 440 -//| sine_wave = array.array("h", [0] * length) -//| for i in range(length): -//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15)) +//|# Generate one period of sine wav. +//|length = 8000 // 440 +//|sine_wave = array.array("h", [0] * length) +//|for i in range(length): +//|sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15)) //| -//| dac = audioio.AudioOut(board.SPEAKER) -//| sine_wave = audiocore.RawSample(sine_wave) -//| dac.play(sine_wave, loop=True) -//| time.sleep(1) -//| dac.stop()""" -//| ... +//|dac = audioio.AudioOut(board.SPEAKER) +//|sine_wave = audiocore.RawSample(sine_wave) +//|dac.play(sine_wave, loop=True) +//|time.sleep(1) +//|dac.stop()""" +//|... STATIC mp_obj_t audioio_rawsample_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_channel_count, ARG_sample_rate }; static const mp_arg_t allowed_args[] = { @@ -105,9 +105,9 @@ STATIC mp_obj_t audioio_rawsample_make_new(const mp_obj_type_t *type, size_t n_a return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Deinitialises the AudioOut and releases any hardware resources for reuse.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Deinitialises the AudioOut and releases any hardware resources for reuse.""" +//|... STATIC mp_obj_t audioio_rawsample_deinit(mp_obj_t self_in) { audioio_rawsample_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audioio_rawsample_deinit(self); @@ -121,15 +121,15 @@ STATIC void check_for_deinit(audioio_rawsample_obj_t *self) { } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware when exiting a context. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t audioio_rawsample_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audioio_rawsample_deinit(args[0]); @@ -137,12 +137,12 @@ STATIC mp_obj_t audioio_rawsample_obj___exit__(size_t n_args, const mp_obj_t *ar } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audioio_rawsample___exit___obj, 4, 4, audioio_rawsample_obj___exit__); -//| sample_rate: Any = -//| """32 bit value that dictates how quickly samples are played in Hertz (cycles per second). -//| When the sample is looped, this can change the pitch output without changing the underlying -//| sample. This will not change the sample rate of any active playback. Call ``play`` again to -//| change it.""" -//| ... +//|sample_rate: Any = +//|"""32 bit value that dictates how quickly samples are played in Hertz (cycles per second). +//|When the sample is looped, this can change the pitch output without changing the underlying +//|sample. This will not change the sample rate of any active playback. Call ``play`` again to +//|change it.""" +//|... STATIC mp_obj_t audioio_rawsample_obj_get_sample_rate(mp_obj_t self_in) { audioio_rawsample_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audiocore/WaveFile.c b/shared-bindings/audiocore/WaveFile.c index f57e1f877..9116e71f0 100644 --- a/shared-bindings/audiocore/WaveFile.c +++ b/shared-bindings/audiocore/WaveFile.c @@ -34,42 +34,42 @@ #include "supervisor/shared/translate.h" //|class WaveFile: -//| """.. currentmodule:: audiocore +//|""".. currentmodule:: audiocore //| -//| :class:`WaveFile` -- Load a wave file for audio playback -//| ======================================================== +//|:class:`WaveFile` -- Load a wave file for audio playback +//|======================================================== //| -//| A .wav file prepped for audio playback. Only mono and stereo files are supported. Samples must -//| be 8 bit unsigned or 16 bit signed. If a buffer is provided, it will be used instead of allocating -//| an internal buffer.""" -//| def __init__(self, file: typing.BinaryIO, buffer: bytearray): -//| """Load a .wav file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. +//|A .wav file prepped for audio playback. Only mono and stereo files are supported. Samples must +//|be 8 bit unsigned or 16 bit signed. If a buffer is provided, it will be used instead of allocating +//|an internal buffer.""" +//|def __init__(self, file: typing.BinaryIO, buffer: bytearray): +//|"""Load a .wav file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. //| -//| :param typing.BinaryIO file: Already opened wave file -//| :param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two 512 byte buffers are allocated internally. +//|:param typing.BinaryIO file: Already opened wave file +//|:param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two 512 byte buffers are allocated internally. //| //| -//| Playing a wave file from flash:: +//|Playing a wave file from flash:: //| -//| import board -//| import audiocore -//| import audioio -//| import digitalio +//|import board +//|import audiocore +//|import audioio +//|import digitalio //| -//| # Required for CircuitPlayground Express -//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) -//| speaker_enable.switch_to_output(value=True) +//|# Required for CircuitPlayground Express +//|speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) +//|speaker_enable.switch_to_output(value=True) //| -//| data = open("cplay-5.1-16bit-16khz.wav", "rb") -//| wav = audiocore.WaveFile(data) -//| a = audioio.AudioOut(board.A0) +//|data = open("cplay-5.1-16bit-16khz.wav", "rb") +//|wav = audiocore.WaveFile(data) +//|a = audioio.AudioOut(board.A0) //| -//| print("playing") -//| a.play(wav) -//| while a.playing: -//| pass -//| print("stopped")""" -//| ... +//|print("playing") +//|a.play(wav) +//|while a.playing: +//|pass +//|print("stopped")""" +//|... STATIC mp_obj_t audioio_wavefile_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 1, 2, false); @@ -92,9 +92,9 @@ STATIC mp_obj_t audioio_wavefile_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Deinitialises the WaveFile and releases all memory resources for reuse.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Deinitialises the WaveFile and releases all memory resources for reuse.""" +//|... STATIC mp_obj_t audioio_wavefile_deinit(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audioio_wavefile_deinit(self); @@ -108,15 +108,15 @@ STATIC void check_for_deinit(audioio_wavefile_obj_t *self) { } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware when exiting a context. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t audioio_wavefile_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audioio_wavefile_deinit(args[0]); @@ -124,11 +124,11 @@ STATIC mp_obj_t audioio_wavefile_obj___exit__(size_t n_args, const mp_obj_t *arg } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audioio_wavefile___exit___obj, 4, 4, audioio_wavefile_obj___exit__); -//| sample_rate: Any = -//| """32 bit value that dictates how quickly samples are loaded into the DAC -//| in Hertz (cycles per second). When the sample is looped, this can change -//| the pitch output without changing the underlying sample.""" -//| ... +//|sample_rate: Any = +//|"""32 bit value that dictates how quickly samples are loaded into the DAC +//|in Hertz (cycles per second). When the sample is looped, this can change +//|the pitch output without changing the underlying sample.""" +//|... STATIC mp_obj_t audioio_wavefile_obj_get_sample_rate(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -151,9 +151,9 @@ const mp_obj_property_t audioio_wavefile_sample_rate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| bits_per_sample: Any = -//| """Bits per sample. (read only)""" -//| ... +//|bits_per_sample: Any = +//|"""Bits per sample. (read only)""" +//|... STATIC mp_obj_t audioio_wavefile_obj_get_bits_per_sample(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -168,9 +168,9 @@ const mp_obj_property_t audioio_wavefile_bits_per_sample_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| channel_count: Any = -//| """Number of audio channels. (read only)""" -//| ... +//|channel_count: Any = +//|"""Number of audio channels. (read only)""" +//|... STATIC mp_obj_t audioio_wavefile_obj_get_channel_count(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); -- cgit v1.2.3 From c7b721f4f19b561006d9d2e1c46d79d9f22bf4b0 Mon Sep 17 00:00:00 2001 From: dherrada Date: Tue, 28 Apr 2020 19:22:03 -0400 Subject: Fixed some more whitespace --- shared-bindings/audiobusio/I2SOut.c | 150 +++++++++++++++---------------- shared-bindings/audiobusio/PDMIn.c | 131 +++++++++++++-------------- shared-bindings/audioio/AudioOut.c | 154 ++++++++++++++++---------------- shared-bindings/audiomixer/Mixer.c | 132 +++++++++++++-------------- shared-bindings/audiomixer/MixerVoice.c | 44 ++++----- shared-bindings/audiomp3/MP3Decoder.c | 105 +++++++++++----------- 6 files changed, 354 insertions(+), 362 deletions(-) diff --git a/shared-bindings/audiobusio/I2SOut.c b/shared-bindings/audiobusio/I2SOut.c index cad17ad18..765e0a12d 100644 --- a/shared-bindings/audiobusio/I2SOut.c +++ b/shared-bindings/audiobusio/I2SOut.c @@ -36,63 +36,63 @@ #include "supervisor/shared/translate.h" //|class I2SOut: -//| """.. currentmodule:: audiobusio +//|""".. currentmodule:: audiobusio //| -//| :class:`I2SOut` -- Output an I2S audio signal -//| ======================================================== +//|:class:`I2SOut` -- Output an I2S audio signal +//|======================================================== //| -//| I2S is used to output an audio signal on an I2S bus.""" -//| def __init__(self, bit_clock: microcontroller.Pin, word_select: microcontroller.Pin, data: microcontroller.Pin, *, left_justified: bool): -//| """Create a I2SOut object associated with the given pins. +//|I2S is used to output an audio signal on an I2S bus.""" +//|def __init__(self, bit_clock: microcontroller.Pin, word_select: microcontroller.Pin, data: microcontroller.Pin, *, left_justified: bool): +//|"""Create a I2SOut object associated with the given pins. //| -//| :param ~microcontroller.Pin bit_clock: The bit clock (or serial clock) pin -//| :param ~microcontroller.Pin word_select: The word select (or left/right clock) pin -//| :param ~microcontroller.Pin data: The data pin -//| :param bool left_justified: True when data bits are aligned with the word select clock. False -//| when they are shifted by one to match classic I2S protocol. +//|:param ~microcontroller.Pin bit_clock: The bit clock (or serial clock) pin +//|:param ~microcontroller.Pin word_select: The word select (or left/right clock) pin +//|:param ~microcontroller.Pin data: The data pin +//|:param bool left_justified: True when data bits are aligned with the word select clock. False +//|when they are shifted by one to match classic I2S protocol. //| -//| Simple 8ksps 440 Hz sine wave on `Metro M0 Express `_ -//| using `UDA1334 Breakout `_:: +//|Simple 8ksps 440 Hz sine wave on `Metro M0 Express `_ +//|using `UDA1334 Breakout `_:: //| -//| import audiobusio -//| import audiocore -//| import board -//| import array -//| import time -//| import math +//|import audiobusio +//|import audiocore +//|import board +//|import array +//|import time +//|import math //| -//| # Generate one period of sine wave. -//| length = 8000 // 440 -//| sine_wave = array.array("H", [0] * length) -//| for i in range(length): -//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) +//|# Generate one period of sine wave. +//|length = 8000 // 440 +//|sine_wave = array.array("H", [0] * length) +//|for i in range(length): +//|sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) //| -//| sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) -//| i2s = audiobusio.I2SOut(board.D1, board.D0, board.D9) -//| i2s.play(sine_wave, loop=True) -//| time.sleep(1) -//| i2s.stop() +//|sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) +//|i2s = audiobusio.I2SOut(board.D1, board.D0, board.D9) +//|i2s.play(sine_wave, loop=True) +//|time.sleep(1) +//|i2s.stop() //| -//| Playing a wave file from flash:: +//|Playing a wave file from flash:: //| -//| import board -//| import audioio -//| import audiocore -//| import audiobusio -//| import digitalio +//|import board +//|import audioio +//|import audiocore +//|import audiobusio +//|import digitalio //| //| -//| f = open("cplay-5.1-16bit-16khz.wav", "rb") -//| wav = audiocore.WaveFile(f) +//|f = open("cplay-5.1-16bit-16khz.wav", "rb") +//|wav = audiocore.WaveFile(f) //| -//| a = audiobusio.I2SOut(board.D1, board.D0, board.D9) +//|a = audiobusio.I2SOut(board.D1, board.D0, board.D9) //| -//| print("playing") -//| a.play(wav) -//| while a.playing: -//| pass -//| print("stopped")""" -//| ... +//|print("playing") +//|a.play(wav) +//|while a.playing: +//|pass +//|print("stopped")""" +//|... STATIC mp_obj_t audiobusio_i2sout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_bit_clock, ARG_word_select, ARG_data, ARG_left_justified }; static const mp_arg_t allowed_args[] = { @@ -115,9 +115,9 @@ STATIC mp_obj_t audiobusio_i2sout_make_new(const mp_obj_type_t *type, size_t n_a return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Deinitialises the I2SOut and releases any hardware resources for reuse.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Deinitialises the I2SOut and releases any hardware resources for reuse.""" +//|... STATIC mp_obj_t audiobusio_i2sout_deinit(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiobusio_i2sout_deinit(self); @@ -130,15 +130,15 @@ STATIC void check_for_deinit(audiobusio_i2sout_obj_t *self) { raise_deinited_error(); } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware when exiting a context. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t audiobusio_i2sout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiobusio_i2sout_deinit(args[0]); @@ -147,14 +147,14 @@ STATIC mp_obj_t audiobusio_i2sout_obj___exit__(size_t n_args, const mp_obj_t *ar STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiobusio_i2sout___exit___obj, 4, 4, audiobusio_i2sout_obj___exit__); -//| def play(self, sample: Any, *, loop: Any = False) -> Any: -//| """Plays the sample once when loop=False and continuously when loop=True. -//| Does not block. Use `playing` to block. +//|def play(self, sample: Any, *, loop: Any = False) -> Any: +//|"""Plays the sample once when loop=False and continuously when loop=True. +//|Does not block. Use `playing` to block. //| -//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. +//|Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. //| -//| The sample itself should consist of 8 bit or 16 bit samples.""" -//| ... +//|The sample itself should consist of 8 bit or 16 bit samples.""" +//|... STATIC mp_obj_t audiobusio_i2sout_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -173,9 +173,9 @@ STATIC mp_obj_t audiobusio_i2sout_obj_play(size_t n_args, const mp_obj_t *pos_ar } MP_DEFINE_CONST_FUN_OBJ_KW(audiobusio_i2sout_play_obj, 1, audiobusio_i2sout_obj_play); -//| def stop(self, ) -> Any: -//| """Stops playback.""" -//| ... +//|def stop(self, ) -> Any: +//|"""Stops playback.""" +//|... STATIC mp_obj_t audiobusio_i2sout_obj_stop(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -184,9 +184,9 @@ STATIC mp_obj_t audiobusio_i2sout_obj_stop(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiobusio_i2sout_stop_obj, audiobusio_i2sout_obj_stop); -//| playing: Any = -//| """True when the audio sample is being output. (read-only)""" -//| ... +//|playing: Any = +//|"""True when the audio sample is being output. (read-only)""" +//|... STATIC mp_obj_t audiobusio_i2sout_obj_get_playing(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -201,9 +201,9 @@ const mp_obj_property_t audiobusio_i2sout_playing_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| def pause(self, ) -> Any: -//| """Stops playback temporarily while remembering the position. Use `resume` to resume playback.""" -//| ... +//|def pause(self, ) -> Any: +//|"""Stops playback temporarily while remembering the position. Use `resume` to resume playback.""" +//|... STATIC mp_obj_t audiobusio_i2sout_obj_pause(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -216,9 +216,9 @@ STATIC mp_obj_t audiobusio_i2sout_obj_pause(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiobusio_i2sout_pause_obj, audiobusio_i2sout_obj_pause); -//| def resume(self, ) -> Any: -//| """Resumes sample playback after :py:func:`pause`.""" -//| ... +//|def resume(self, ) -> Any: +//|"""Resumes sample playback after :py:func:`pause`.""" +//|... STATIC mp_obj_t audiobusio_i2sout_obj_resume(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -231,9 +231,9 @@ STATIC mp_obj_t audiobusio_i2sout_obj_resume(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiobusio_i2sout_resume_obj, audiobusio_i2sout_obj_resume); -//| paused: Any = -//| """True when playback is paused. (read-only)""" -//| ... +//|paused: Any = +//|"""True when playback is paused. (read-only)""" +//|... STATIC mp_obj_t audiobusio_i2sout_obj_get_paused(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audiobusio/PDMIn.c b/shared-bindings/audiobusio/PDMIn.c index b75545ba7..28ff9a481 100644 --- a/shared-bindings/audiobusio/PDMIn.c +++ b/shared-bindings/audiobusio/PDMIn.c @@ -36,63 +36,56 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" - - - - - - - //|class PDMIn: -//| """.. currentmodule:: audiobusio +//|""".. currentmodule:: audiobusio //| -//| :class:`PDMIn` -- Record an input PDM audio stream -//| ======================================================== +//|:class:`PDMIn` -- Record an input PDM audio stream +//|======================================================== //| -//| PDMIn can be used to record an input audio signal on a given set of pins.""" +//|PDMIn can be used to record an input audio signal on a given set of pins.""" //| -//| def __init__(self, clock_pin: microcontroller.Pin, data_pin: microcontroller.Pin, *, sample_rate: int = 16000, bit_depth: int = 8, mono: bool = True, oversample: int = 64, startup_delay: float = 0.11): -//| """Create a PDMIn object associated with the given pins. This allows you to -//| record audio signals from the given pins. Individual ports may put further -//| restrictions on the recording parameters. The overall sample rate is -//| determined by `sample_rate` x ``oversample``, and the total must be 1MHz or -//| higher, so `sample_rate` must be a minimum of 16000. +//|def __init__(self, clock_pin: microcontroller.Pin, data_pin: microcontroller.Pin, *, sample_rate: int = 16000, bit_depth: int = 8, mono: bool = True, oversample: int = 64, startup_delay: float = 0.11): +//|"""Create a PDMIn object associated with the given pins. This allows you to +//|record audio signals from the given pins. Individual ports may put further +//|restrictions on the recording parameters. The overall sample rate is +//|determined by `sample_rate` x ``oversample``, and the total must be 1MHz or +//|higher, so `sample_rate` must be a minimum of 16000. //| -//| :param ~microcontroller.Pin clock_pin: The pin to output the clock to -//| :param ~microcontroller.Pin data_pin: The pin to read the data from -//| :param int sample_rate: Target sample_rate of the resulting samples. Check `sample_rate` for actual value. -//| Minimum sample_rate is about 16000 Hz. -//| :param int bit_depth: Final number of bits per sample. Must be divisible by 8 -//| :param bool mono: True when capturing a single channel of audio, captures two channels otherwise -//| :param int oversample: Number of single bit samples to decimate into a final sample. Must be divisible by 8 -//| :param float startup_delay: seconds to wait after starting microphone clock -//| to allow microphone to turn on. Most require only 0.01s; some require 0.1s. Longer is safer. -//| Must be in range 0.0-1.0 seconds.""" -//| ... - -//| Record 8-bit unsigned samples to buffer:: +//|:param ~microcontroller.Pin clock_pin: The pin to output the clock to +//|:param ~microcontroller.Pin data_pin: The pin to read the data from +//|:param int sample_rate: Target sample_rate of the resulting samples. Check `sample_rate` for actual value. +//|Minimum sample_rate is about 16000 Hz. +//|:param int bit_depth: Final number of bits per sample. Must be divisible by 8 +//|:param bool mono: True when capturing a single channel of audio, captures two channels otherwise +//|:param int oversample: Number of single bit samples to decimate into a final sample. Must be divisible by 8 +//|:param float startup_delay: seconds to wait after starting microphone clock +//|to allow microphone to turn on. Most require only 0.01s; some require 0.1s. Longer is safer. +//|Must be in range 0.0-1.0 seconds.""" +//|... + +//|Record 8-bit unsigned samples to buffer:: //| -//| import audiobusio -//| import board +//|import audiobusio +//|import board //| -//| # Prep a buffer to record into -//| b = bytearray(200) -//| with audiobusio.PDMIn(board.MICROPHONE_CLOCK, board.MICROPHONE_DATA, sample_rate=16000) as mic: -//| mic.record(b, len(b)) +//|# Prep a buffer to record into +//|b = bytearray(200) +//|with audiobusio.PDMIn(board.MICROPHONE_CLOCK, board.MICROPHONE_DATA, sample_rate=16000) as mic: +//|mic.record(b, len(b)) //| -//| Record 16-bit unsigned samples to buffer:: +//|Record 16-bit unsigned samples to buffer:: //| -//| import audiobusio -//| import board +//|import audiobusio +//|import board //| -//| # Prep a buffer to record into. The array interface doesn't allow for -//| # constructing with a set size so we append to it until we have the size -//| # we want. -//| b = array.array("H") -//| for i in range(200): -//| b.append(0) -//| with audiobusio.PDMIn(board.MICROPHONE_CLOCK, board.MICROPHONE_DATA, sample_rate=16000, bit_depth=16) as mic: -//| mic.record(b, len(b)) +//|# Prep a buffer to record into. The array interface doesn't allow for +//|# constructing with a set size so we append to it until we have the size +//|# we want. +//|b = array.array("H") +//|for i in range(200): +//|b.append(0) +//|with audiobusio.PDMIn(board.MICROPHONE_CLOCK, board.MICROPHONE_DATA, sample_rate=16000, bit_depth=16) as mic: +//|mic.record(b, len(b)) //| STATIC mp_obj_t audiobusio_pdmin_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_clock_pin, ARG_data_pin, ARG_sample_rate, ARG_bit_depth, ARG_mono, ARG_oversample, ARG_startup_delay }; @@ -145,9 +138,9 @@ STATIC mp_obj_t audiobusio_pdmin_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Deinitialises the PDMIn and releases any hardware resources for reuse.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Deinitialises the PDMIn and releases any hardware resources for reuse.""" +//|... STATIC mp_obj_t audiobusio_pdmin_deinit(mp_obj_t self_in) { audiobusio_pdmin_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiobusio_pdmin_deinit(self); @@ -160,14 +153,14 @@ STATIC void check_for_deinit(audiobusio_pdmin_obj_t *self) { raise_deinited_error(); } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware when exiting a context.""" +//|... STATIC mp_obj_t audiobusio_pdmin_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiobusio_pdmin_deinit(args[0]); @@ -176,17 +169,17 @@ STATIC mp_obj_t audiobusio_pdmin_obj___exit__(size_t n_args, const mp_obj_t *arg STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiobusio_pdmin___exit___obj, 4, 4, audiobusio_pdmin_obj___exit__); -//| def record(self, destination: Any, destination_length: Any) -> Any: -//| """Records destination_length bytes of samples to destination. This is -//| blocking. +//|def record(self, destination: Any, destination_length: Any) -> Any: +//|"""Records destination_length bytes of samples to destination. This is +//|blocking. //| -//| An IOError may be raised when the destination is too slow to record the -//| audio at the given rate. For internal flash, writing all 1s to the file -//| before recording is recommended to speed up writes. +//|An IOError may be raised when the destination is too slow to record the +//|audio at the given rate. For internal flash, writing all 1s to the file +//|before recording is recommended to speed up writes. //| -//| :return: The number of samples recorded. If this is less than ``destination_length``, -//| some samples were missed due to processing time.""" -//| ... +//|:return: The number of samples recorded. If this is less than ``destination_length``, +//|some samples were missed due to processing time.""" +//|... STATIC mp_obj_t audiobusio_pdmin_obj_record(mp_obj_t self_obj, mp_obj_t destination, mp_obj_t destination_length) { audiobusio_pdmin_obj_t *self = MP_OBJ_TO_PTR(self_obj); check_for_deinit(self); @@ -217,10 +210,10 @@ STATIC mp_obj_t audiobusio_pdmin_obj_record(mp_obj_t self_obj, mp_obj_t destinat } MP_DEFINE_CONST_FUN_OBJ_3(audiobusio_pdmin_record_obj, audiobusio_pdmin_obj_record); -//| sample_rate: Any = -//| """The actual sample_rate of the recording. This may not match the constructed -//| sample rate due to internal clock limitations.""" -//| ... +//|sample_rate: Any = +//|"""The actual sample_rate of the recording. This may not match the constructed +//|sample rate due to internal clock limitations.""" +//|... STATIC mp_obj_t audiobusio_pdmin_obj_get_sample_rate(mp_obj_t self_in) { audiobusio_pdmin_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audioio/AudioOut.c b/shared-bindings/audioio/AudioOut.c index 8df923e6f..28c345d16 100644 --- a/shared-bindings/audioio/AudioOut.c +++ b/shared-bindings/audioio/AudioOut.c @@ -37,63 +37,63 @@ #include "supervisor/shared/translate.h" //|class AudioOut: -//| """.. currentmodule:: audioio +//|""".. currentmodule:: audioio //| -//| :class:`AudioOut` -- Output an analog audio signal -//| ======================================================== +//|:class:`AudioOut` -- Output an analog audio signal +//|======================================================== //| -//| AudioOut can be used to output an analog audio signal on a given pin.""" +//|AudioOut can be used to output an analog audio signal on a given pin.""" //| -//| def __init__(self, left_channel: microcontroller.Pin, *, right_channel: microcontroller.Pin = None, quiescent_value: int = 0x8000): -//| """Create a AudioOut object associated with the given pin(s). This allows you to -//| play audio signals out on the given pin(s). +//|def __init__(self, left_channel: microcontroller.Pin, *, right_channel: microcontroller.Pin = None, quiescent_value: int = 0x8000): +//|"""Create a AudioOut object associated with the given pin(s). This allows you to +//|play audio signals out on the given pin(s). //| -//| :param ~microcontroller.Pin left_channel: The pin to output the left channel to -//| :param ~microcontroller.Pin right_channel: The pin to output the right channel to -//| :param int quiescent_value: The output value when no signal is present. Samples should start -//| and end with this value to prevent audible popping. +//|:param ~microcontroller.Pin left_channel: The pin to output the left channel to +//|:param ~microcontroller.Pin right_channel: The pin to output the right channel to +//|:param int quiescent_value: The output value when no signal is present. Samples should start +//|and end with this value to prevent audible popping. //| -//| Simple 8ksps 440 Hz sin wave:: +//|Simple 8ksps 440 Hz sin wave:: //| -//| import audiocore -//| import audioio -//| import board -//| import array -//| import time -//| import math +//|import audiocore +//|import audioio +//|import board +//|import array +//|import time +//|import math //| -//| # Generate one period of sine wav. -//| length = 8000 // 440 -//| sine_wave = array.array("H", [0] * length) -//| for i in range(length): -//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) +//|# Generate one period of sine wav. +//|length = 8000 // 440 +//|sine_wave = array.array("H", [0] * length) +//|for i in range(length): +//|sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) //| -//| dac = audioio.AudioOut(board.SPEAKER) -//| sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) -//| dac.play(sine_wave, loop=True) -//| time.sleep(1) -//| dac.stop() +//|dac = audioio.AudioOut(board.SPEAKER) +//|sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) +//|dac.play(sine_wave, loop=True) +//|time.sleep(1) +//|dac.stop() //| -//| Playing a wave file from flash:: +//|Playing a wave file from flash:: //| -//| import board -//| import audioio -//| import digitalio +//|import board +//|import audioio +//|import digitalio //| -//| # Required for CircuitPlayground Express -//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) -//| speaker_enable.switch_to_output(value=True) +//|# Required for CircuitPlayground Express +//|speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) +//|speaker_enable.switch_to_output(value=True) //| -//| data = open("cplay-5.1-16bit-16khz.wav", "rb") -//| wav = audiocore.WaveFile(data) -//| a = audioio.AudioOut(board.A0) +//|data = open("cplay-5.1-16bit-16khz.wav", "rb") +//|wav = audiocore.WaveFile(data) +//|a = audioio.AudioOut(board.A0) //| -//| print("playing") -//| a.play(wav) -//| while a.playing: -//| pass -//| print("stopped")""" -//| ... +//|print("playing") +//|a.play(wav) +//|while a.playing: +//|pass +//|print("stopped")""" +//|... STATIC mp_obj_t audioio_audioout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_left_channel, ARG_right_channel, ARG_quiescent_value }; static const mp_arg_t allowed_args[] = { @@ -115,9 +115,9 @@ STATIC mp_obj_t audioio_audioout_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Deinitialises the AudioOut and releases any hardware resources for reuse.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Deinitialises the AudioOut and releases any hardware resources for reuse.""" +//|... STATIC mp_obj_t audioio_audioout_deinit(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audioio_audioout_deinit(self); @@ -130,15 +130,15 @@ STATIC void check_for_deinit(audioio_audioout_obj_t *self) { raise_deinited_error(); } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware when exiting a context. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t audioio_audioout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audioio_audioout_deinit(args[0]); @@ -147,16 +147,16 @@ STATIC mp_obj_t audioio_audioout_obj___exit__(size_t n_args, const mp_obj_t *arg STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audioio_audioout___exit___obj, 4, 4, audioio_audioout_obj___exit__); -//| def play(self, sample: Any, *, loop: Any = False) -> Any: -//| """Plays the sample once when loop=False and continuously when loop=True. -//| Does not block. Use `playing` to block. +//|def play(self, sample: Any, *, loop: Any = False) -> Any: +//|"""Plays the sample once when loop=False and continuously when loop=True. +//|Does not block. Use `playing` to block. //| -//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. +//|Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. //| -//| The sample itself should consist of 16 bit samples. Microcontrollers with a lower output -//| resolution will use the highest order bits to output. For example, the SAMD21 has a 10 bit -//| DAC that ignores the lowest 6 bits when playing 16 bit samples.""" -//| ... +//|The sample itself should consist of 16 bit samples. Microcontrollers with a lower output +//|resolution will use the highest order bits to output. For example, the SAMD21 has a 10 bit +//|DAC that ignores the lowest 6 bits when playing 16 bit samples.""" +//|... STATIC mp_obj_t audioio_audioout_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -175,9 +175,9 @@ STATIC mp_obj_t audioio_audioout_obj_play(size_t n_args, const mp_obj_t *pos_arg } MP_DEFINE_CONST_FUN_OBJ_KW(audioio_audioout_play_obj, 1, audioio_audioout_obj_play); -//| def stop(self, ) -> Any: -//| """Stops playback and resets to the start of the sample.""" -//| ... +//|def stop(self, ) -> Any: +//|"""Stops playback and resets to the start of the sample.""" +//|... STATIC mp_obj_t audioio_audioout_obj_stop(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -186,9 +186,9 @@ STATIC mp_obj_t audioio_audioout_obj_stop(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audioio_audioout_stop_obj, audioio_audioout_obj_stop); -//| playing: Any = -//| """True when an audio sample is being output even if `paused`. (read-only)""" -//| ... +//|playing: Any = +//|"""True when an audio sample is being output even if `paused`. (read-only)""" +//|... STATIC mp_obj_t audioio_audioout_obj_get_playing(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -203,9 +203,9 @@ const mp_obj_property_t audioio_audioout_playing_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| def pause(self, ) -> Any: -//| """Stops playback temporarily while remembering the position. Use `resume` to resume playback.""" -//| ... +//|def pause(self, ) -> Any: +//|"""Stops playback temporarily while remembering the position. Use `resume` to resume playback.""" +//|... STATIC mp_obj_t audioio_audioout_obj_pause(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -218,9 +218,9 @@ STATIC mp_obj_t audioio_audioout_obj_pause(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audioio_audioout_pause_obj, audioio_audioout_obj_pause); -//| def resume(self, ) -> Any: -//| """Resumes sample playback after :py:func:`pause`.""" -//| ... +//|def resume(self, ) -> Any: +//|"""Resumes sample playback after :py:func:`pause`.""" +//|... STATIC mp_obj_t audioio_audioout_obj_resume(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -233,9 +233,9 @@ STATIC mp_obj_t audioio_audioout_obj_resume(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audioio_audioout_resume_obj, audioio_audioout_obj_resume); -//| paused: Any = -//| """True when playback is paused. (read-only)""" -//| ... +//|paused: Any = +//|"""True when playback is paused. (read-only)""" +//|... STATIC mp_obj_t audioio_audioout_obj_get_paused(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audiomixer/Mixer.c b/shared-bindings/audiomixer/Mixer.c index 1949f2add..93b1d3635 100644 --- a/shared-bindings/audiomixer/Mixer.c +++ b/shared-bindings/audiomixer/Mixer.c @@ -39,49 +39,49 @@ #include "supervisor/shared/translate.h" //|class Mixer: -//| """.. currentmodule:: audiomixer +//|""".. currentmodule:: audiomixer //| -//| :class:`Mixer` -- Mixes one or more audio samples together -//| =========================================================== +//|:class:`Mixer` -- Mixes one or more audio samples together +//|=========================================================== //| -//| Mixer mixes multiple samples into one sample.""" +//|Mixer mixes multiple samples into one sample.""" //| -//| def __init__(self, voice_count: int = 2, buffer_size: int = 1024, channel_count: int = 2, bits_per_sample: int = 16, samples_signed: bool = True, sample_rate: int = 8000): -//| """Create a Mixer object that can mix multiple channels with the same sample rate. -//| Samples are accessed and controlled with the mixer's `audiomixer.MixerVoice` objects. +//|def __init__(self, voice_count: int = 2, buffer_size: int = 1024, channel_count: int = 2, bits_per_sample: int = 16, samples_signed: bool = True, sample_rate: int = 8000): +//|"""Create a Mixer object that can mix multiple channels with the same sample rate. +//|Samples are accessed and controlled with the mixer's `audiomixer.MixerVoice` objects. //| -//| :param int voice_count: The maximum number of voices to mix -//| :param int buffer_size: The total size in bytes of the buffers to mix into -//| :param int channel_count: The number of channels the source samples contain. 1 = mono; 2 = stereo. -//| :param int bits_per_sample: The bits per sample of the samples being played -//| :param bool samples_signed: Samples are signed (True) or unsigned (False) -//| :param int sample_rate: The sample rate to be used for all samples +//|:param int voice_count: The maximum number of voices to mix +//|:param int buffer_size: The total size in bytes of the buffers to mix into +//|:param int channel_count: The number of channels the source samples contain. 1 = mono; 2 = stereo. +//|:param int bits_per_sample: The bits per sample of the samples being played +//|:param bool samples_signed: Samples are signed (True) or unsigned (False) +//|:param int sample_rate: The sample rate to be used for all samples //| -//| Playing a wave file from flash:: +//|Playing a wave file from flash:: //| -//| import board -//| import audioio -//| import audiocore -//| import audiomixer -//| import digitalio +//|import board +//|import audioio +//|import audiocore +//|import audiomixer +//|import digitalio //| -//| a = audioio.AudioOut(board.A0) -//| music = audiocore.WaveFile(open("cplay-5.1-16bit-16khz.wav", "rb")) -//| drum = audiocore.WaveFile(open("drum.wav", "rb")) -//| mixer = audiomixer.Mixer(voice_count=2, sample_rate=16000, channel_count=1, -//| bits_per_sample=16, samples_signed=True) +//|a = audioio.AudioOut(board.A0) +//|music = audiocore.WaveFile(open("cplay-5.1-16bit-16khz.wav", "rb")) +//|drum = audiocore.WaveFile(open("drum.wav", "rb")) +//|mixer = audiomixer.Mixer(voice_count=2, sample_rate=16000, channel_count=1, +//|bits_per_sample=16, samples_signed=True) //| -//| print("playing") -//| # Have AudioOut play our Mixer source -//| a.play(mixer) -//| # Play the first sample voice -//| mixer.voice[0].play(music) -//| while mixer.playing: -//| # Play the second sample voice -//| mixer.voice[1].play(drum) -//| time.sleep(1) -//| print("stopped")""" -//| ... +//|print("playing") +//|# Have AudioOut play our Mixer source +//|a.play(mixer) +//|# Play the first sample voice +//|mixer.voice[0].play(music) +//|while mixer.playing: +//|# Play the second sample voice +//|mixer.voice[1].play(drum) +//|time.sleep(1) +//|print("stopped")""" +//|... STATIC mp_obj_t audiomixer_mixer_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_voice_count, ARG_buffer_size, ARG_channel_count, ARG_bits_per_sample, ARG_samples_signed, ARG_sample_rate }; static const mp_arg_t allowed_args[] = { @@ -125,9 +125,9 @@ STATIC mp_obj_t audiomixer_mixer_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Deinitialises the Mixer and releases any hardware resources for reuse.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Deinitialises the Mixer and releases any hardware resources for reuse.""" +//|... STATIC mp_obj_t audiomixer_mixer_deinit(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiomixer_mixer_deinit(self); @@ -141,15 +141,15 @@ STATIC void check_for_deinit(audiomixer_mixer_obj_t *self) { } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware when exiting a context. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t audiomixer_mixer_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiomixer_mixer_deinit(args[0]); @@ -157,9 +157,9 @@ STATIC mp_obj_t audiomixer_mixer_obj___exit__(size_t n_args, const mp_obj_t *arg } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiomixer_mixer___exit___obj, 4, 4, audiomixer_mixer_obj___exit__); -//| playing: Any = -//| """True when any voice is being output. (read-only)""" -//| ... +//|playing: Any = +//|"""True when any voice is being output. (read-only)""" +//|... STATIC mp_obj_t audiomixer_mixer_obj_get_playing(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -174,9 +174,9 @@ const mp_obj_property_t audiomixer_mixer_playing_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| sample_rate: Any = -//| """32 bit value that dictates how quickly samples are played in Hertz (cycles per second).""" -//| ... +//|sample_rate: Any = +//|"""32 bit value that dictates how quickly samples are played in Hertz (cycles per second).""" +//|... STATIC mp_obj_t audiomixer_mixer_obj_get_sample_rate(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -191,14 +191,14 @@ const mp_obj_property_t audiomixer_mixer_sample_rate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| voice: Any = -//| """A tuple of the mixer's `audiomixer.MixerVoice` object(s). +//|voice: Any = +//|"""A tuple of the mixer's `audiomixer.MixerVoice` object(s). //| -//| .. code-block:: python +//|.. code-block:: python //| -//| >>> mixer.voice -//| (,)""" -//| ... +//|>>> mixer.voice +//|(,)""" +//|... STATIC mp_obj_t audiomixer_mixer_obj_get_voice(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -213,14 +213,14 @@ const mp_obj_property_t audiomixer_mixer_voice_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| def play(self, sample: Any, *, voice: Any = 0, loop: Any = False) -> Any: -//| """Plays the sample once when loop=False and continuously when loop=True. -//| Does not block. Use `playing` to block. +//|def play(self, sample: Any, *, voice: Any = 0, loop: Any = False) -> Any: +//|"""Plays the sample once when loop=False and continuously when loop=True. +//|Does not block. Use `playing` to block. //| -//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. +//|Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. //| -//| The sample must match the Mixer's encoding settings given in the constructor.""" -//| ... +//|The sample must match the Mixer's encoding settings given in the constructor.""" +//|... STATIC mp_obj_t audiomixer_mixer_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_voice, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -245,9 +245,9 @@ STATIC mp_obj_t audiomixer_mixer_obj_play(size_t n_args, const mp_obj_t *pos_arg } MP_DEFINE_CONST_FUN_OBJ_KW(audiomixer_mixer_play_obj, 1, audiomixer_mixer_obj_play); -//| def stop_voice(self, voice: Any = 0) -> Any: -//| """Stops playback of the sample on the given voice.""" -//| ... +//|def stop_voice(self, voice: Any = 0) -> Any: +//|"""Stops playback of the sample on the given voice.""" +//|... STATIC mp_obj_t audiomixer_mixer_obj_stop_voice(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_voice }; static const mp_arg_t allowed_args[] = { diff --git a/shared-bindings/audiomixer/MixerVoice.c b/shared-bindings/audiomixer/MixerVoice.c index e6c750baf..299600dd1 100644 --- a/shared-bindings/audiomixer/MixerVoice.c +++ b/shared-bindings/audiomixer/MixerVoice.c @@ -38,17 +38,17 @@ #include "supervisor/shared/translate.h" //|class MixerVoice: -//| """.. currentmodule:: audiomixer +//|""".. currentmodule:: audiomixer //| -//| :class:`MixerVoice` -- Voice objects used with Mixer -//| ===================================================== +//|:class:`MixerVoice` -- Voice objects used with Mixer +//|===================================================== //| -//| Used to access and control samples with `audiomixer.Mixer`.""" +//|Used to access and control samples with `audiomixer.Mixer`.""" //| -//| def __init__(self, ): +//|def __init__(self, ): //| -//| """MixerVoice instance object(s) created by `audiomixer.Mixer`.""" -//| ... +//|"""MixerVoice instance object(s) created by `audiomixer.Mixer`.""" +//|... // TODO: support mono or stereo voices STATIC mp_obj_t audiomixer_mixervoice_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { audiomixer_mixervoice_obj_t *self = m_new_obj(audiomixer_mixervoice_obj_t); @@ -59,14 +59,14 @@ STATIC mp_obj_t audiomixer_mixervoice_make_new(const mp_obj_type_t *type, size_t return MP_OBJ_FROM_PTR(self); } -//| def play(self, sample: Any, *, loop: Any = False) -> Any: -//| """Plays the sample once when ``loop=False``, and continuously when ``loop=True``. -//| Does not block. Use `playing` to block. +//|def play(self, sample: Any, *, loop: Any = False) -> Any: +//|"""Plays the sample once when ``loop=False``, and continuously when ``loop=True``. +//|Does not block. Use `playing` to block. //| -//| Sample must be an `audiocore.WaveFile`, `audiomixer.Mixer` or `audiocore.RawSample`. +//|Sample must be an `audiocore.WaveFile`, `audiomixer.Mixer` or `audiocore.RawSample`. //| -//| The sample must match the `audiomixer.Mixer`'s encoding settings given in the constructor.""" -//| ... +//|The sample must match the `audiomixer.Mixer`'s encoding settings given in the constructor.""" +//|... STATIC mp_obj_t audiomixer_mixervoice_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -83,9 +83,9 @@ STATIC mp_obj_t audiomixer_mixervoice_obj_play(size_t n_args, const mp_obj_t *po } MP_DEFINE_CONST_FUN_OBJ_KW(audiomixer_mixervoice_play_obj, 1, audiomixer_mixervoice_obj_play); -//| def stop(self, ) -> Any: -//| """Stops playback of the sample on this voice.""" -//| ... +//|def stop(self, ) -> Any: +//|"""Stops playback of the sample on this voice.""" +//|... STATIC mp_obj_t audiomixer_mixervoice_obj_stop(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_voice }; static const mp_arg_t allowed_args[] = { @@ -101,9 +101,9 @@ STATIC mp_obj_t audiomixer_mixervoice_obj_stop(size_t n_args, const mp_obj_t *po } MP_DEFINE_CONST_FUN_OBJ_KW(audiomixer_mixervoice_stop_obj, 1, audiomixer_mixervoice_obj_stop); -//| level(): Any = -//| """The volume level of a voice, as a floating point number between 0 and 1.""" -//| ... +//|level(): Any = +//|"""The volume level of a voice, as a floating point number between 0 and 1.""" +//|... STATIC mp_obj_t audiomixer_mixervoice_obj_get_level(mp_obj_t self_in) { return mp_obj_new_float(common_hal_audiomixer_mixervoice_get_level(self_in)); } @@ -137,9 +137,9 @@ const mp_obj_property_t audiomixer_mixervoice_level_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| playing: Any = -//| """True when this voice is being output. (read-only)""" -//| ... +//|playing: Any = +//|"""True when this voice is being output. (read-only)""" +//|... STATIC mp_obj_t audiomixer_mixervoice_obj_get_playing(mp_obj_t self_in) { audiomixer_mixervoice_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/audiomp3/MP3Decoder.c b/shared-bindings/audiomp3/MP3Decoder.c index 0bb2c8829..7c011b65f 100644 --- a/shared-bindings/audiomp3/MP3Decoder.c +++ b/shared-bindings/audiomp3/MP3Decoder.c @@ -35,41 +35,41 @@ #include "supervisor/shared/translate.h" //|class MP3: -//| """.. currentmodule:: audiomp3 +//|""".. currentmodule:: audiomp3 //| -//| :class:`MP3Decoder` -- Load a mp3 file for audio playback -//| ========================================================= +//|:class:`MP3Decoder` -- Load a mp3 file for audio playback +//|========================================================= //| -//| An object that decodes MP3 files for playback on an audio device.""" +//|An object that decodes MP3 files for playback on an audio device.""" //| -//| def __init__(self, file: typing.BinaryIO, buffer: bytearray): -//| """Load a .mp3 file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. +//|def __init__(self, file: typing.BinaryIO, buffer: bytearray): +//|"""Load a .mp3 file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. //| -//| :param typing.BinaryIO file: Already opened mp3 file -//| :param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two buffers are allocated internally. The specific buffer size required depends on the mp3 file. +//|:param typing.BinaryIO file: Already opened mp3 file +//|:param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two buffers are allocated internally. The specific buffer size required depends on the mp3 file. //| //| -//| Playing a mp3 file from flash:: +//|Playing a mp3 file from flash:: //| -//| import board -//| import audiomp3 -//| import audioio -//| import digitalio +//|import board +//|import audiomp3 +//|import audioio +//|import digitalio //| -//| # Required for CircuitPlayground Express -//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) -//| speaker_enable.switch_to_output(value=True) +//|# Required for CircuitPlayground Express +//|speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) +//|speaker_enable.switch_to_output(value=True) //| -//| data = open("cplay-16bit-16khz-64kbps.mp3", "rb") -//| mp3 = audiomp3.MP3Decoder(data) -//| a = audioio.AudioOut(board.A0) +//|data = open("cplay-16bit-16khz-64kbps.mp3", "rb") +//|mp3 = audiomp3.MP3Decoder(data) +//|a = audioio.AudioOut(board.A0) //| -//| print("playing") -//| a.play(mp3) -//| while a.playing: -//| pass -//| print("stopped")""" -//| ... +//|print("playing") +//|a.play(mp3) +//|while a.playing: +//|pass +//|print("stopped")""" +//|... STATIC mp_obj_t audiomp3_mp3file_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 1, 2, false); @@ -92,9 +92,9 @@ STATIC mp_obj_t audiomp3_mp3file_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Deinitialises the MP3 and releases all memory resources for reuse.""" -//| ... +//|def deinit(self, ) -> Any: +//|"""Deinitialises the MP3 and releases all memory resources for reuse.""" +//|... STATIC mp_obj_t audiomp3_mp3file_deinit(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiomp3_mp3file_deinit(self); @@ -108,16 +108,15 @@ STATIC void check_for_deinit(audiomp3_mp3file_obj_t *self) { } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//|def __enter__(self, ) -> Any: +//|"""No-op used by Context Managers.""" +//|... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//|def __exit__(self, ) -> Any: +//|"""Automatically deinitializes the hardware when exiting a context. See +//|:ref:`lifetime-and-contextmanagers` for more info.""" +//|... STATIC mp_obj_t audiomp3_mp3file_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiomp3_mp3file_deinit(args[0]); @@ -125,9 +124,9 @@ STATIC mp_obj_t audiomp3_mp3file_obj___exit__(size_t n_args, const mp_obj_t *arg } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiomp3_mp3file___exit___obj, 4, 4, audiomp3_mp3file_obj___exit__); -//| file: Any = -//| """File to play back.""" -//| ... +//|file: Any = +//|"""File to play back.""" +//|... STATIC mp_obj_t audiomp3_mp3file_obj_get_file(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -155,11 +154,11 @@ const mp_obj_property_t audiomp3_mp3file_file_obj = { -//| sample_rate: Any = -//| """32 bit value that dictates how quickly samples are loaded into the DAC -//| in Hertz (cycles per second). When the sample is looped, this can change -//| the pitch output without changing the underlying sample.""" -//| ... +//|sample_rate: Any = +//|"""32 bit value that dictates how quickly samples are loaded into the DAC +//|in Hertz (cycles per second). When the sample is looped, this can change +//|the pitch output without changing the underlying sample.""" +//|... STATIC mp_obj_t audiomp3_mp3file_obj_get_sample_rate(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -182,9 +181,9 @@ const mp_obj_property_t audiomp3_mp3file_sample_rate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| bits_per_sample: Any = -//| """Bits per sample. (read only)""" -//| ... +//|bits_per_sample: Any = +//|"""Bits per sample. (read only)""" +//|... STATIC mp_obj_t audiomp3_mp3file_obj_get_bits_per_sample(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -199,9 +198,9 @@ const mp_obj_property_t audiomp3_mp3file_bits_per_sample_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| channel_count: Any = -//| """Number of audio channels. (read only)""" -//| ... +//|channel_count: Any = +//|"""Number of audio channels. (read only)""" +//|... STATIC mp_obj_t audiomp3_mp3file_obj_get_channel_count(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -216,9 +215,9 @@ const mp_obj_property_t audiomp3_mp3file_channel_count_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| rms_level: Any = -//| """The RMS audio level of a recently played moment of audio. (read only)""" -//| ... +//|rms_level: Any = +//|"""The RMS audio level of a recently played moment of audio. (read only)""" +//|... STATIC mp_obj_t audiomp3_mp3file_obj_get_rms_level(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); -- cgit v1.2.3 From 8c77252adf4b78a2a4fe5d138e470fb70ae7233b Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Wed, 29 Apr 2020 10:29:12 -0700 Subject: Better handle //| and do __init__.c first. --- tools/extract_pyi.py | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/tools/extract_pyi.py b/tools/extract_pyi.py index c7f3e4604..de783eb27 100644 --- a/tools/extract_pyi.py +++ b/tools/extract_pyi.py @@ -20,12 +20,22 @@ for module in modules: if not os.path.isdir(module_path): continue pyi_lines = [] - for class_file in os.listdir(module_path): + classes = os.listdir(module_path) + classes = [x for x in sorted(classes) if x.endswith(".c")] + if classes[-1] == "__init__.c": + classes.insert(0, classes.pop()) + for class_file in classes: class_path = os.path.join(module_path, class_file) with open(class_path, "r") as f: for line in f: - if line.startswith("//| "): - pyi_lines.append(line[4:]) + if line.startswith("//|"): + if line[3] == " ": + line = line[4:] + elif line[3] == "\n": + line = line[3:] + else: + continue + pyi_lines.append(line) stub_filename = os.path.join(stub_directory, module + ".pyi") print(stub_filename) -- cgit v1.2.3 From 93d1e53c66f73b6a2d85398dba7924472f1f053d Mon Sep 17 00:00:00 2001 From: dherrada Date: Wed, 29 Apr 2020 14:19:04 -0400 Subject: Hopefully fixed whitespace issues --- shared-bindings/busio/SPI.c | 200 +++++++++++++++++++-------------------- shared-bindings/busio/__init__.c | 4 +- 2 files changed, 102 insertions(+), 102 deletions(-) diff --git a/shared-bindings/busio/SPI.c b/shared-bindings/busio/SPI.c index 5643b0d04..9644f4eb5 100644 --- a/shared-bindings/busio/SPI.c +++ b/shared-bindings/busio/SPI.c @@ -41,43 +41,43 @@ #include "supervisor/shared/translate.h" -//|class SPI: -//|""".. currentmodule:: busio +//| class SPI: +//| """.. currentmodule:: busio //| -//|`SPI` -- a 3-4 wire serial protocol -//|----------------------------------------------- +//| `SPI` -- a 3-4 wire serial protocol +//| ----------------------------------------------- //| -//|SPI is a serial protocol that has exclusive pins for data in and out of the -//|master. It is typically faster than :py:class:`~busio.I2C` because a -//|separate pin is used to control the active slave rather than a transitted -//|address. This class only manages three of the four SPI lines: `!clock`, -//|`!MOSI`, `!MISO`. Its up to the client to manage the appropriate slave -//|select line. (This is common because multiple slaves can share the `!clock`, -//|`!MOSI` and `!MISO` lines and therefore the hardware.)""" +//| SPI is a serial protocol that has exclusive pins for data in and out of the +//| master. It is typically faster than :py:class:`~busio.I2C` because a +//| separate pin is used to control the active slave rather than a transitted +//| address. This class only manages three of the four SPI lines: `!clock`, +//| `!MOSI`, `!MISO`. Its up to the client to manage the appropriate slave +//| select line. (This is common because multiple slaves can share the `!clock`, +//| `!MOSI` and `!MISO` lines and therefore the hardware.)""" //| -//|def __init__(self, clock: microcontroller.Pin, MOSI: microcontroller.Pin = None, MISO: microcontroller.Pin = None): +//| def __init__(self, clock: microcontroller.Pin, MOSI: microcontroller.Pin = None, MISO: microcontroller.Pin = None): //| -//|"""Construct an SPI object on the given pins. +//| """Construct an SPI object on the given pins. //| -//|..note:: The SPI peripherals allocated in order of desirability, if possible, -//|such as highest speed and not shared use first. For instance, on the nRF52840, -//|there is a single 32MHz SPI peripheral, and multiple 8MHz peripherals, -//|some of which may also be used for I2C. The 32MHz SPI peripheral is returned -//|first, then the exclusive 8MHz SPI peripheral, and finally the shared 8MHz -//|peripherals. +//| ..note:: The SPI peripherals allocated in order of desirability, if possible, +//| such as highest speed and not shared use first. For instance, on the nRF52840, +//| there is a single 32MHz SPI peripheral, and multiple 8MHz peripherals, +//| some of which may also be used for I2C. The 32MHz SPI peripheral is returned +//| first, then the exclusive 8MHz SPI peripheral, and finally the shared 8MHz +//| peripherals. //| -//|.. seealso:: Using this class directly requires careful lock management. -//|Instead, use :class:`~adafruit_bus_device.spi_device.SPIDevice` to -//|manage locks. +//| .. seealso:: Using this class directly requires careful lock management. +//| Instead, use :class:`~adafruit_bus_device.spi_device.SPIDevice` to +//| manage locks. //| -//|.. seealso:: Using this class to directly read registers requires manual -//|bit unpacking. Instead, use an existing driver or make one with -//|:ref:`Register ` data descriptors. +//| .. seealso:: Using this class to directly read registers requires manual +//| bit unpacking. Instead, use an existing driver or make one with +//| :ref:`Register ` data descriptors. //| -//|:param ~microcontroller.Pin clock: the pin to use for the clock. -//|:param ~microcontroller.Pin MOSI: the Master Out Slave In pin. -//|:param ~microcontroller.Pin MISO: the Master In Slave Out pin.""" -//|... +//| :param ~microcontroller.Pin clock: the pin to use for the clock. +//| :param ~microcontroller.Pin MOSI: the Master Out Slave In pin. +//| :param ~microcontroller.Pin MISO: the Master In Slave Out pin.""" +//| ... // TODO(tannewt): Support LSB SPI. @@ -101,9 +101,9 @@ STATIC mp_obj_t busio_spi_make_new(const mp_obj_type_t *type, size_t n_args, con return MP_OBJ_FROM_PTR(self); } -//|def deinit(self, ) -> Any: -//|"""Turn off the SPI bus.""" -//|... +//| def deinit(self, ) -> Any: +//| """Turn off the SPI bus.""" +//| ... STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_spi_deinit(self); @@ -111,15 +111,15 @@ STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_deinit_obj, busio_spi_obj_deinit); -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers. -//|Provided by context manager helper.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers. +//| Provided by context manager helper.""" +//| ... -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware when exiting a context. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_spi_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_spi_deinit(args[0]); @@ -140,28 +140,28 @@ STATIC void check_for_deinit(busio_spi_obj_t *self) { } } -//|def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: -//|"""Configures the SPI bus. The SPI object must be locked. +//| def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: +//| """Configures the SPI bus. The SPI object must be locked. //| -//|:param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower -//|due to the granularity of available clock settings. -//|Check the `frequency` attribute for the actual clock rate. -//|:param int polarity: the base state of the clock line (0 or 1) -//|:param int phase: the edge of the clock that data is captured. First (0) -//|or second (1). Rising or falling depends on clock polarity. -//|:param int bits: the number of bits per word +//| :param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower +//| due to the granularity of available clock settings. +//| Check the `frequency` attribute for the actual clock rate. +//| :param int polarity: the base state of the clock line (0 or 1) +//| :param int phase: the edge of the clock that data is captured. First (0) +//| or second (1). Rising or falling depends on clock polarity. +//| :param int bits: the number of bits per word //| -//|.. note:: On the SAMD21, it is possible to set the baudrate to 24 MHz, but that -//|speed is not guaranteed to work. 12 MHz is the next available lower speed, and is -//|within spec for the SAMD21. +//| .. note:: On the SAMD21, it is possible to set the baudrate to 24 MHz, but that +//| speed is not guaranteed to work. 12 MHz is the next available lower speed, and is +//| within spec for the SAMD21. //| -//|.. note:: On the nRF52840, these baudrates are available: 125kHz, 250kHz, 1MHz, 2MHz, 4MHz, -//|and 8MHz. -//|If you pick a a baudrate other than one of these, the nearest lower -//|baudrate will be chosen, with a minimum of 125kHz. -//|Two SPI objects may be created, except on the Circuit Playground Bluefruit, -//|which allows only one (to allow for an additional I2C object).""" -//|... +//| .. note:: On the nRF52840, these baudrates are available: 125kHz, 250kHz, 1MHz, 2MHz, 4MHz, +//| and 8MHz. +//| If you pick a a baudrate other than one of these, the nearest lower +//| baudrate will be chosen, with a minimum of 125kHz. +//| Two SPI objects may be created, except on the Circuit Playground Bluefruit, +//| which allows only one (to allow for an additional I2C object).""" +//| ... STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_baudrate, ARG_polarity, ARG_phase, ARG_bits }; @@ -198,12 +198,12 @@ STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_ } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_configure_obj, 1, busio_spi_configure); -//|def try_lock(self, ) -> Any: -//|"""Attempts to grab the SPI lock. Returns True on success. +//| def try_lock(self, ) -> Any: +//| """Attempts to grab the SPI lock. Returns True on success. //| -//|:return: True when lock has been grabbed -//|:rtype: bool""" -//|... +//| :return: True when lock has been grabbed +//| :rtype: bool""" +//| ... STATIC mp_obj_t busio_spi_obj_try_lock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -211,9 +211,9 @@ STATIC mp_obj_t busio_spi_obj_try_lock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_try_lock_obj, busio_spi_obj_try_lock); -//|unlock(self, ) -> Any: -//|"""Releases the SPI lock.""" -//|... +//| def unlock(self, ) -> Any: +//| """Releases the SPI lock.""" +//| ... STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -223,14 +223,14 @@ STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_unlock_obj, busio_spi_obj_unlock); -//|def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any: ... -//|"""Write the data contained in ``buffer``. The SPI object must be locked. -//|If the buffer is empty, nothing happens. +//| def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any: +//| """Write the data contained in ``buffer``. The SPI object must be locked. +//| If the buffer is empty, nothing happens. //| -//|:param bytearray buffer: Write out the data in this buffer -//|:param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]`` -//|:param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``""" -//|... +//| :param bytearray buffer: Write out the data in this buffer +//| :param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]`` +//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``""" +//| ... STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end }; @@ -264,16 +264,16 @@ STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_ MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_obj, 2, busio_spi_write); -//|def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any: -//|"""Read into ``buffer`` while writing ``write_value`` for each byte read. -//|The SPI object must be locked. -//|If the number of bytes to read is 0, nothing happens. +//| def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any: +//| """Read into ``buffer`` while writing ``write_value`` for each byte read. +//| The SPI object must be locked. +//| If the number of bytes to read is 0, nothing happens. //| -//|:param bytearray buffer: Read data into this buffer -//|:param int start: Start of the slice of ``buffer`` to read into: ``buffer[start:end]`` -//|:param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` -//|:param int write_value: Value to write while reading. (Usually ignored.)""" -//|... +//| :param bytearray buffer: Read data into this buffer +//| :param int start: Start of the slice of ``buffer`` to read into: ``buffer[start:end]`` +//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` +//| :param int write_value: Value to write while reading. (Usually ignored.)""" +//| ... STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end, ARG_write_value }; @@ -307,20 +307,20 @@ STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_m } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_readinto_obj, 2, busio_spi_readinto); -//|def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: -//|"""Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``. -//|The SPI object must be locked. -//|The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]`` -//|must be equal. -//|If buffer slice lengths are both 0, nothing happens. +//| def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: +//| """Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``. +//| The SPI object must be locked. +//| The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]`` +//| must be equal. +//| If buffer slice lengths are both 0, nothing happens. //| -//|:param bytearray buffer_out: Write out the data in this buffer -//|:param bytearray buffer_in: Read data into this buffer -//|:param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]`` -//|:param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)`` -//|:param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` -//|:param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``""" -//|... +//| :param bytearray buffer_out: Write out the data in this buffer +//| :param bytearray buffer_in: Read data into this buffer +//| :param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]`` +//| :param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)`` +//| :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` +//| :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``""" +//| ... STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer_out, ARG_buffer_in, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; @@ -369,10 +369,10 @@ STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_readinto_obj, 2, busio_spi_write_readinto); -//|frequency: Any = -//|"""The actual SPI bus frequency. This may not match the frequency requested -//|due to internal limitations.""" -//|... +//| frequency: Any = ... +//| """The actual SPI bus frequency. This may not match the frequency requested +//| due to internal limitations.""" +//| STATIC mp_obj_t busio_spi_obj_get_frequency(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/busio/__init__.c b/shared-bindings/busio/__init__.c index ff2933dc6..212b3218c 100644 --- a/shared-bindings/busio/__init__.c +++ b/shared-bindings/busio/__init__.c @@ -38,7 +38,7 @@ #include "py/runtime.h" -//| :mod:`busio` --- Hardware accelerated behavior +//| """:mod:`busio` --- Hardware accelerated behavior //| ================================================= //| //| .. module:: busio @@ -81,7 +81,7 @@ //| This example will initialize the the device, run //| :py:meth:`~busio.I2C.scan` and then :py:meth:`~busio.I2C.deinit` the //| hardware. The last step is optional because CircuitPython automatically -//| resets hardware after a program finishes. +//| resets hardware after a program finishes.""" //| STATIC const mp_rom_map_elem_t busio_module_globals_table[] = { -- cgit v1.2.3 From deccdcc1d668a9e65036872aa0a3064ae9ec959c Mon Sep 17 00:00:00 2001 From: dherrada Date: Wed, 29 Apr 2020 15:20:05 -0400 Subject: Did the same for the rest of busio --- shared-bindings/busio/I2C.c | 184 ++++++++++++++++++++-------------------- shared-bindings/busio/OneWire.c | 87 ++++++++++--------- shared-bindings/busio/UART.c | 164 +++++++++++++++++------------------ 3 files changed, 216 insertions(+), 219 deletions(-) diff --git a/shared-bindings/busio/I2C.c b/shared-bindings/busio/I2C.c index 8b71be085..31dd9a7bf 100644 --- a/shared-bindings/busio/I2C.c +++ b/shared-bindings/busio/I2C.c @@ -36,33 +36,35 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" -//|class I2C: -//|""".. currentmodule:: busio +//| class I2C: +//| """.. currentmodule:: busio //| -//|:class:`I2C` --- Two wire serial protocol -//|------------------------------------------""" -//|def __init__(self, scl: microcontroller.Pin, sda: microcontroller.Pin, *, frequency: int = 400000, timeout: int = 255): -//|"""I2C is a two-wire protocol for communicating between devices. At the -//|physical level it consists of 2 wires: SCL and SDA, the clock and data -//|lines respectively. +//| :class:`I2C` --- Two wire serial protocol +//| ------------------------------------------""" //| -//|.. seealso:: Using this class directly requires careful lock management. -//|Instead, use :class:`~adafruit_bus_device.i2c_device.I2CDevice` to -//|manage locks. +//| def __init__(self, scl: microcontroller.Pin, sda: microcontroller.Pin, *, frequency: int = 400000, timeout: int = 255): //| -//|.. seealso:: Using this class to directly read registers requires manual -//|bit unpacking. Instead, use an existing driver or make one with -//|:ref:`Register ` data descriptors. +//| """I2C is a two-wire protocol for communicating between devices. At the +//| physical level it consists of 2 wires: SCL and SDA, the clock and data +//| lines respectively. //| -//|:param ~microcontroller.Pin scl: The clock pin -//|:param ~microcontroller.Pin sda: The data pin -//|:param int frequency: The clock frequency in Hertz -//|:param int timeout: The maximum clock stretching timeut - (used only for bitbangio.I2C; ignored for busio.I2C) +//| .. seealso:: Using this class directly requires careful lock management. +//| Instead, use :class:`~adafruit_bus_device.i2c_device.I2CDevice` to +//| manage locks. //| -//|.. note:: On the nRF52840, only one I2C object may be created, -//|except on the Circuit Playground Bluefruit, which allows two, -//|one for the onboard accelerometer, and one for offboard use.""" -//|... +//| .. seealso:: Using this class to directly read registers requires manual +//| bit unpacking. Instead, use an existing driver or make one with +//| :ref:`Register ` data descriptors. +//| +//| :param ~microcontroller.Pin scl: The clock pin +//| :param ~microcontroller.Pin sda: The data pin +//| :param int frequency: The clock frequency in Hertz +//| :param int timeout: The maximum clock stretching timeut - (used only for bitbangio.I2C; ignored for busio.I2C) +//| +//| .. note:: On the nRF52840, only one I2C object may be created, +//| except on the Circuit Playground Bluefruit, which allows two, +//| one for the onboard accelerometer, and one for offboard use.""" +//| ... STATIC mp_obj_t busio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { busio_i2c_obj_t *self = m_new_obj(busio_i2c_obj_t); self->base.type = &busio_i2c_type; @@ -83,9 +85,9 @@ STATIC mp_obj_t busio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, con return (mp_obj_t)self; } -//|def deinit(self, ) -> Any: -//|"""Releases control of the underlying hardware so other classes can use it.""" -//|... +//| def deinit(self, ) -> Any: +//| """Releases control of the underlying hardware so other classes can use it.""" +//| ... STATIC mp_obj_t busio_i2c_obj_deinit(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_i2c_deinit(self); @@ -99,15 +101,15 @@ STATIC void check_for_deinit(busio_i2c_obj_t *self) { } } -//|def __enter__(self, ) -> Any: -//|"""No-op used in Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used in Context Managers.""" +//| ... // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware on context exit. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware on context exit. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_i2c_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_i2c_deinit(args[0]); @@ -122,13 +124,14 @@ static void check_lock(busio_i2c_obj_t *self) { } } -//|def scan(self, ) -> Any: -//|"""Scan all I2C addresses between 0x08 and 0x77 inclusive and return a -//|list of those that respond. +//| def scan(self, ) -> Any: //| -//|:return: List of device ids on the I2C bus -//|:rtype: list""" -//|... +//| """Scan all I2C addresses between 0x08 and 0x77 inclusive and return a +//| list of those that respond. +//| +//| :return: List of device ids on the I2C bus +//| :rtype: list""" +//| ... STATIC mp_obj_t busio_i2c_scan(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -145,11 +148,12 @@ STATIC mp_obj_t busio_i2c_scan(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_scan_obj, busio_i2c_scan); -//|def try_lock(self, ) -> Any: -//|"""Attempts to grab the I2C lock. Returns True on success. -//|:return: True when lock has been grabbed -//|:rtype: bool""" -//|... +//| def try_lock(self, ) -> Any: +//| """Attempts to grab the I2C lock. Returns True on success. +//| +//| :return: True when lock has been grabbed +//| :rtype: bool""" +//| ... STATIC mp_obj_t busio_i2c_obj_try_lock(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -157,9 +161,9 @@ STATIC mp_obj_t busio_i2c_obj_try_lock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_try_lock_obj, busio_i2c_obj_try_lock); -//|def unlock(self, ) -> Any: -//|"""Releases the I2C lock.""" -//|... +//| def unlock(self, ) -> Any: +//| """Releases the I2C lock.""" +//| ... STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -168,20 +172,20 @@ STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_unlock_obj, busio_i2c_obj_unlock); -//|def readfrom_into(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None) -> Any: -//|"""Read into ``buffer`` from the slave specified by ``address``. -//|The number of bytes read will be the length of ``buffer``. -//|At least one byte must be read. +//| def readfrom_into(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None) -> Any: +//| """Read into ``buffer`` from the slave specified by ``address``. +//| The number of bytes read will be the length of ``buffer``. +//| At least one byte must be read. //| -//|If ``start`` or ``end`` is provided, then the buffer will be sliced -//|as if ``buffer[start:end]``. This will not cause an allocation like -//|``buf[start:end]`` will so it saves memory. +//| If ``start`` or ``end`` is provided, then the buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like +//| ``buf[start:end]`` will so it saves memory. //| -//|:param int address: 7-bit device address -//|:param bytearray buffer: buffer to write into -//|:param int start: Index to start writing at -//|:param int end: Index to write up to but not include. Defaults to ``len(buffer)``""" -//|... +//| :param int address: 7-bit device address +//| :param bytearray buffer: buffer to write into +//| :param int start: Index to start writing at +//| :param int end: Index to write up to but not include. Defaults to ``len(buffer)``""" +//| ... // Shared arg parsing for readfrom_into and writeto_then_readfrom. STATIC void readfrom(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end) { mp_buffer_info_t bufinfo; @@ -219,26 +223,26 @@ STATIC mp_obj_t busio_i2c_readfrom_into(size_t n_args, const mp_obj_t *pos_args, } MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_readfrom_into_obj, 3, busio_i2c_readfrom_into); -//|def writeto(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None, stop: bool = True) -> Any: -//|"""Write the bytes from ``buffer`` to the slave specified by ``address``. -//|Transmits a stop bit when stop is True. Setting stop=False is deprecated and stop will be -//|removed in CircuitPython 6.x. Use `writeto_then_readfrom` when needing a write, no stop and -//|repeated start before a read. +//| def writeto(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None, stop: bool = True) -> Any: +//| """Write the bytes from ``buffer`` to the slave specified by ``address``. +//| Transmits a stop bit when stop is True. Setting stop=False is deprecated and stop will be +//| removed in CircuitPython 6.x. Use `writeto_then_readfrom` when needing a write, no stop and +//| repeated start before a read. //| -//|If ``start`` or ``end`` is provided, then the buffer will be sliced -//|as if ``buffer[start:end]``. This will not cause an allocation like -//|``buffer[start:end]`` will so it saves memory. +//| If ``start`` or ``end`` is provided, then the buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like +//| ``buffer[start:end]`` will so it saves memory. //| -//|Writing a buffer or slice of length zero is permitted, as it can be used -//|to poll for the existence of a device. +//| Writing a buffer or slice of length zero is permitted, as it can be used +//| to poll for the existence of a device. //| -//|:param int address: 7-bit device address -//|:param bytearray buffer: buffer containing the bytes to write -//|:param int start: Index to start writing from -//|:param int end: Index to read up to but not include. Defaults to ``len(buffer)`` -//|:param bool stop: If true, output an I2C stop condition after the buffer is written. -//|Deprecated. Will be removed in 6.x and act as stop=True.""" -//|... +//| :param int address: 7-bit device address +//| :param bytearray buffer: buffer containing the bytes to write +//| :param int start: Index to start writing from +//| :param int end: Index to read up to but not include. Defaults to ``len(buffer)`` +//| :param bool stop: If true, output an I2C stop condition after the buffer is written. +//| Deprecated. Will be removed in 6.x and act as stop=True.""" +//| ... // Shared arg parsing for writeto and writeto_then_readfrom. STATIC void writeto(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end, bool stop) { // get the buffer to write the data from @@ -277,23 +281,23 @@ STATIC mp_obj_t busio_i2c_writeto(size_t n_args, const mp_obj_t *pos_args, mp_ma } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_writeto_obj, 1, busio_i2c_writeto); -//|def writeto_then_readfrom(self, address: int, out_buffer: bytearray, in_buffer: bytearray, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> Any: -//|"""Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop -//|bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and -//|``in_buffer`` can be the same buffer because they are used sequentially. +//| def writeto_then_readfrom(self, address: int, out_buffer: bytearray, in_buffer: bytearray, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> Any: +//| """Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop +//| bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and +//| ``in_buffer`` can be the same buffer because they are used sequentially. //| -//|If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced -//|as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]`` -//|will so it saves memory. +//| If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]`` +//| will so it saves memory. //| -//|:param int address: 7-bit device address -//|:param bytearray out_buffer: buffer containing the bytes to write -//|:param bytearray in_buffer: buffer to write into -//|:param int out_start: Index to start writing from -//|:param int out_end: Index to read up to but not include. Defaults to ``len(buffer)`` -//|:param int in_start: Index to start writing at -//|:param int in_end: Index to write up to but not include. Defaults to ``len(buffer)``""" -//|... +//| :param int address: 7-bit device address +//| :param bytearray out_buffer: buffer containing the bytes to write +//| :param bytearray in_buffer: buffer to write into +//| :param int out_start: Index to start writing from +//| :param int out_end: Index to read up to but not include. Defaults to ``len(buffer)`` +//| :param int in_start: Index to start writing at +//| :param int in_end: Index to write up to but not include. Defaults to ``len(buffer)``""" +//| ... STATIC mp_obj_t busio_i2c_writeto_then_readfrom(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_address, ARG_out_buffer, ARG_in_buffer, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; static const mp_arg_t allowed_args[] = { diff --git a/shared-bindings/busio/OneWire.c b/shared-bindings/busio/OneWire.c index d6af32bd9..09a76decc 100644 --- a/shared-bindings/busio/OneWire.c +++ b/shared-bindings/busio/OneWire.c @@ -34,36 +34,35 @@ #include "shared-bindings/busio/OneWire.h" #include "shared-bindings/util.h" -//|class OneWire: -//|""".. currentmodule:: busio +//| class OneWire: +//| """.. currentmodule:: busio //| -//|:class:`OneWire` -- Lowest-level of the Maxim OneWire protocol -//|=================================================================""" +//| :class:`OneWire` -- Lowest-level of the Maxim OneWire protocol +//| =================================================================""" //| -//|__init__(self, pin: microcontroller.Pin): -//|""":class:`~busio.OneWire` implements the timing-sensitive foundation of the Maxim -//|(formerly Dallas Semi) OneWire protocol. +//| def __init__(self, pin: microcontroller.Pin): +//| """(formerly Dallas Semi) OneWire protocol. //| -//|Protocol definition is here: https://www.maximintegrated.com/en/app-notes/index.mvp/id/126 +//| Protocol definition is here: https://www.maximintegrated.com/en/app-notes/index.mvp/id/126 //| -//|.. class:: OneWire(pin) +//| .. class:: OneWire(pin) //| -//|Create a OneWire object associated with the given pin. The object -//|implements the lowest level timing-sensitive bits of the protocol. +//| Create a OneWire object associated with the given pin. The object +//| implements the lowest level timing-sensitive bits of the protocol. //| -//|:param ~microcontroller.Pin pin: Pin connected to the OneWire bus +//| :param ~microcontroller.Pin pin: Pin connected to the OneWire bus //| -//|Read a short series of pulses:: +//| Read a short series of pulses:: //| -//|import busio -//|import board +//| import busio +//| import board //| -//|onewire = busio.OneWire(board.D7) -//|onewire.reset() -//|onewire.write_bit(True) -//|onewire.write_bit(False) -//|print(onewire.read_bit())""" -//|... +//| onewire = busio.OneWire(board.D7) +//| onewire.reset() +//| onewire.write_bit(True) +//| onewire.write_bit(False) +//| print(onewire.read_bit())""" +//| ... STATIC mp_obj_t busio_onewire_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_pin }; static const mp_arg_t allowed_args[] = { @@ -80,9 +79,9 @@ STATIC mp_obj_t busio_onewire_make_new(const mp_obj_type_t *type, size_t n_args, return MP_OBJ_FROM_PTR(self); } -//|def deinit(self, ) -> Any: -//|"""Deinitialize the OneWire bus and release any hardware resources for reuse.""" -//|... +//| def deinit(self, ) -> Any: +//| """Deinitialize the OneWire bus and release any hardware resources for reuse.""" +//| ... STATIC mp_obj_t busio_onewire_deinit(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_onewire_deinit(self); @@ -96,15 +95,15 @@ STATIC void check_for_deinit(busio_onewire_obj_t *self) { } } -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware when exiting a context. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_onewire_deinit(args[0]); @@ -112,12 +111,12 @@ STATIC mp_obj_t busio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_onewire___exit___obj, 4, 4, busio_onewire_obj___exit__); -//|def reset(self, ) -> Any: -//|"""Reset the OneWire bus and read presence +//| def reset(self, ) -> Any: +//| """Reset the OneWire bus and read presence //| -//|:returns: False when at least one device is present -//|:rtype: bool""" -//|... +//| :returns: False when at least one device is present +//| :rtype: bool""" +//| ... STATIC mp_obj_t busio_onewire_obj_reset(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -126,12 +125,12 @@ STATIC mp_obj_t busio_onewire_obj_reset(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_reset_obj, busio_onewire_obj_reset); -//|def read_bit(self, ) -> Any: -//|"""Read in a bit +//| def read_bit(self, ) -> Any: +//| """Read in a bit //| -//|:returns: bit state read -//|:rtype: bool""" -//|... +//| :returns: bit state read +//| :rtype: bool""" +//| ... STATIC mp_obj_t busio_onewire_obj_read_bit(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -140,9 +139,9 @@ STATIC mp_obj_t busio_onewire_obj_read_bit(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_read_bit_obj, busio_onewire_obj_read_bit); -//|def write_bit(self, value: Any) -> Any: -//|"""Write out a bit based on value.""" -//|... +//| def write_bit(self, value: Any) -> Any: +//| """Write out a bit based on value.""" +//| ... STATIC mp_obj_t busio_onewire_obj_write_bit(mp_obj_t self_in, mp_obj_t bool_obj) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/busio/UART.c b/shared-bindings/busio/UART.c index b89b331af..e5d123ce7 100644 --- a/shared-bindings/busio/UART.c +++ b/shared-bindings/busio/UART.c @@ -39,31 +39,31 @@ #include "py/stream.h" #include "supervisor/shared/translate.h" -//|class UART: -//|""".. currentmodule:: busio +//| class UART: +//| """.. currentmodule:: busio //| -//|:class:`UART` -- a bidirectional serial protocol -//|=================================================""" -//|def __init__(self, tx: microcontroller.Pin, rx: microcontroller.Pin, *, baudrate: int = 9600, bits: int = 8, parity: Parity = None, stop: int = 1, timeout: float = 1, receiver_buffer_size: int = 64): -//|"""A common bidirectional serial protocol that uses an an agreed upon speed -//|rather than a shared clock line. +//| :class:`UART` -- a bidirectional serial protocol +//| =================================================""" +//| def __init__(self, tx: microcontroller.Pin, rx: microcontroller.Pin, *, baudrate: int = 9600, bits: int = 8, parity: Parity = None, stop: int = 1, timeout: float = 1, receiver_buffer_size: int = 64): +//| """A common bidirectional serial protocol that uses an an agreed upon speed +//| rather than a shared clock line. //| -//|:param ~microcontroller.Pin tx: the pin to transmit with, or ``None`` if this ``UART`` is receive-only. -//|:param ~microcontroller.Pin rx: the pin to receive on, or ``None`` if this ``UART`` is transmit-only. -//|:param ~microcontroller.Pin rts: the pin for rts, or ``None`` if rts not in use. -//|:param ~microcontroller.Pin cts: the pin for cts, or ``None`` if cts not in use. -//|:param ~microcontroller.Pin rs485_dir: the pin for rs485 direction setting, or ``None`` if rs485 not in use. -//|:param bool rs485_invert: set to invert the sense of the rs485_dir pin. -//|:param int baudrate: the transmit and receive speed. -//|:param int bits: the number of bits per byte, 7, 8 or 9. -//|:param Parity parity: the parity used for error checking. -//|:param int stop: the number of stop bits, 1 or 2. -//|:param float timeout: the timeout in seconds to wait for the first character and between subsequent characters when reading. Raises ``ValueError`` if timeout >100 seconds. -//|:param int receiver_buffer_size: the character length of the read buffer (0 to disable). (When a character is 9 bits the buffer will be 2 * receiver_buffer_size bytes.) +//| :param ~microcontroller.Pin tx: the pin to transmit with, or ``None`` if this ``UART`` is receive-only. +//| :param ~microcontroller.Pin rx: the pin to receive on, or ``None`` if this ``UART`` is transmit-only. +//| :param ~microcontroller.Pin rts: the pin for rts, or ``None`` if rts not in use. +//| :param ~microcontroller.Pin cts: the pin for cts, or ``None`` if cts not in use. +//| :param ~microcontroller.Pin rs485_dir: the pin for rs485 direction setting, or ``None`` if rs485 not in use. +//| :param bool rs485_invert: set to invert the sense of the rs485_dir pin. +//| :param int baudrate: the transmit and receive speed. +//| :param int bits: the number of bits per byte, 7, 8 or 9. +//| :param Parity parity: the parity used for error checking. +//| :param int stop: the number of stop bits, 1 or 2. +//| :param float timeout: the timeout in seconds to wait for the first character and between subsequent characters when reading. Raises ``ValueError`` if timeout >100 seconds. +//| :param int receiver_buffer_size: the character length of the read buffer (0 to disable). (When a character is 9 bits the buffer will be 2 * receiver_buffer_size bytes.) //| -//|*New in CircuitPython 4.0:* ``timeout`` has incompatibly changed units from milliseconds to seconds. -//|The new upper limit on ``timeout`` is meant to catch mistaken use of milliseconds.""" -//|... +//| *New in CircuitPython 4.0:* ``timeout`` has incompatibly changed units from milliseconds to seconds. +//| The new upper limit on ``timeout`` is meant to catch mistaken use of milliseconds.""" +//| ... typedef struct { mp_obj_base_t base; } busio_uart_parity_obj_t; @@ -141,9 +141,9 @@ STATIC mp_obj_t busio_uart_make_new(const mp_obj_type_t *type, size_t n_args, co return (mp_obj_t)self; } -//|def deinit(self, ) -> Any: -//|"""Deinitialises the UART and releases any hardware resources for reuse.""" -//|... +//| def deinit(self, ) -> Any: +//| """Deinitialises the UART and releases any hardware resources for reuse.""" +//| ... STATIC mp_obj_t busio_uart_obj_deinit(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_uart_deinit(self); @@ -157,15 +157,15 @@ STATIC void check_for_deinit(busio_uart_obj_t *self) { } } -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware when exiting a context. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_uart_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_uart_deinit(args[0]); @@ -175,46 +175,40 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_ // These are standard stream methods. Code is in py/stream.c. // -//|def read(self, nbytes: Any = None) -> Any: -//|"""Read characters. If ``nbytes`` is specified then read at most that many -//|bytes. Otherwise, read everything that arrives until the connection -//|times out. Providing the number of bytes expected is highly recommended -//|because it will be faster. +//| def read(self, nbytes: Any = None) -> Any: +//| """Read characters. If ``nbytes`` is specified then read at most that many +//| bytes. Otherwise, read everything that arrives until the connection +//| times out. Providing the number of bytes expected is highly recommended +//| because it will be faster. //| -//|:return: Data read -//|:rtype: bytes or None""" -//|... +//| :return: Data read +//| :rtype: bytes or None""" +//| ... -//|def readinto(self, buf: Any) -> Any: -//|""".. method:: readinto(buf) +//| def readinto(self, buf: Any) -> Any: +//| """Read bytes into the ``buf``. Read at most ``len(buf)`` bytes. //| -//|Read bytes into the ``buf``. Read at most ``len(buf)`` bytes. +//| :return: number of bytes read and stored into ``buf`` +//| :rtype: int or None (on a non-blocking error) //| -//|:return: number of bytes read and stored into ``buf`` -//|:rtype: int or None (on a non-blocking error) -//| -//|*New in CircuitPython 4.0:* No length parameter is permitted.""" -//|... +//| *New in CircuitPython 4.0:* No length parameter is permitted.""" +//| ... -//|def readline(self, ) -> Any: -//|""".. method:: readline() -//| -//|Read a line, ending in a newline character. +//| def readline(self, ) -> Any: +//| """Read a line, ending in a newline character. //| -//|:return: the line read -//|:rtype: int or None""" -//|... +//| :return: the line read +//| :rtype: int or None""" +//| ... -//|def write(self, buf: Any) -> Any: -//|""".. method:: write(buf) -//| -//|Write the buffer of bytes to the bus. +//| def write(self, buf: Any) -> Any: +//| """Write the buffer of bytes to the bus. //| -//|*New in CircuitPython 4.0:* ``buf`` must be bytes, not a string. +//| *New in CircuitPython 4.0:* ``buf`` must be bytes, not a string. //| -//|:return: the number of bytes written -//|:rtype: int or None""" -//|... +//| :return: the number of bytes written +//| :rtype: int or None""" +//| ... // These three methods are used by the shared stream methods. STATIC mp_uint_t busio_uart_read(mp_obj_t self_in, void *buf_in, mp_uint_t size, int *errcode) { @@ -258,9 +252,9 @@ STATIC mp_uint_t busio_uart_ioctl(mp_obj_t self_in, mp_uint_t request, mp_uint_t return ret; } -//|baudrate: Any = -//|"""The current baudrate.""" -//|... +//| baudrate: Any = ... +//| """The current baudrate.""" +//| STATIC mp_obj_t busio_uart_obj_get_baudrate(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -284,9 +278,9 @@ const mp_obj_property_t busio_uart_baudrate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|in_waiting: Any = -//|"""The number of bytes in the input buffer, available to be read""" -//|... +//| in_waiting: Any = ... +//| """The number of bytes in the input buffer, available to be read""" +//| STATIC mp_obj_t busio_uart_obj_get_in_waiting(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -301,9 +295,9 @@ const mp_obj_property_t busio_uart_in_waiting_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|timeout: Any = -//|"""The current timeout, in seconds (float).""" -//|... +//| timeout: Any = ... +//| """The current timeout, in seconds (float).""" +//| STATIC mp_obj_t busio_uart_obj_get_timeout(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -329,9 +323,9 @@ const mp_obj_property_t busio_uart_timeout_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|def reset_input_buffer(self, ) -> Any: -//|"""Discard any unread characters in the input buffer.""" -//|... +//| def reset_input_buffer(self, ) -> Any: ... +//| """Discard any unread characters in the input buffer.""" +//| STATIC mp_obj_t busio_uart_obj_reset_input_buffer(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -340,16 +334,16 @@ STATIC mp_obj_t busio_uart_obj_reset_input_buffer(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_reset_input_buffer_obj, busio_uart_obj_reset_input_buffer); -//|class busio: -//|def __init__(self, ): -//|"""Enum-like class to define the parity used to verify correct data transfer.""" -//|ODD: Any = -//|"""Total number of ones should be odd.""" -//|... -//|EVEN: Any = -//|"""Total number of ones should be even.""" -//|... -//|... +//| class busio: +//| """Enum-like class to define the parity used to verify correct data transfer.""" +//| +//| def __init__(self, ): +//| ODD: Any = ... +//| """Total number of ones should be odd.""" +//| +//| EVEN: Any = ... +//| """Total number of ones should be even.""" +//| ... const mp_obj_type_t busio_uart_parity_type; const busio_uart_parity_obj_t busio_uart_parity_odd_obj = { -- cgit v1.2.3 From 093461e81670d8ad635d8f893a44426a46b9779c Mon Sep 17 00:00:00 2001 From: dherrada Date: Wed, 29 Apr 2020 15:45:19 -0400 Subject: Fixed indentation --- shared-bindings/busio/I2C.c | 136 +++++++++++++++++++------------------- shared-bindings/busio/OneWire.c | 46 ++++++------- shared-bindings/busio/SPI.c | 140 ++++++++++++++++++++-------------------- shared-bindings/busio/UART.c | 88 ++++++++++++------------- 4 files changed, 205 insertions(+), 205 deletions(-) diff --git a/shared-bindings/busio/I2C.c b/shared-bindings/busio/I2C.c index 31dd9a7bf..98ccbb512 100644 --- a/shared-bindings/busio/I2C.c +++ b/shared-bindings/busio/I2C.c @@ -85,9 +85,9 @@ STATIC mp_obj_t busio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, con return (mp_obj_t)self; } -//| def deinit(self, ) -> Any: -//| """Releases control of the underlying hardware so other classes can use it.""" -//| ... +//| def deinit(self, ) -> Any: +//| """Releases control of the underlying hardware so other classes can use it.""" +//| ... STATIC mp_obj_t busio_i2c_obj_deinit(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_i2c_deinit(self); @@ -101,15 +101,15 @@ STATIC void check_for_deinit(busio_i2c_obj_t *self) { } } -//| def __enter__(self, ) -> Any: -//| """No-op used in Context Managers.""" -//| ... +//| def __enter__(self, ) -> Any: +//| """No-op used in Context Managers.""" +//| ... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware on context exit. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware on context exit. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_i2c_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_i2c_deinit(args[0]); @@ -124,14 +124,14 @@ static void check_lock(busio_i2c_obj_t *self) { } } -//| def scan(self, ) -> Any: +//| def scan(self, ) -> Any: //| -//| """Scan all I2C addresses between 0x08 and 0x77 inclusive and return a -//| list of those that respond. +//| """Scan all I2C addresses between 0x08 and 0x77 inclusive and return a +//| list of those that respond. //| -//| :return: List of device ids on the I2C bus -//| :rtype: list""" -//| ... +//| :return: List of device ids on the I2C bus +//| :rtype: list""" +//| ... STATIC mp_obj_t busio_i2c_scan(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -148,12 +148,12 @@ STATIC mp_obj_t busio_i2c_scan(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_scan_obj, busio_i2c_scan); -//| def try_lock(self, ) -> Any: -//| """Attempts to grab the I2C lock. Returns True on success. +//| def try_lock(self, ) -> Any: +//| """Attempts to grab the I2C lock. Returns True on success. //| -//| :return: True when lock has been grabbed -//| :rtype: bool""" -//| ... +//| :return: True when lock has been grabbed +//| :rtype: bool""" +//| ... STATIC mp_obj_t busio_i2c_obj_try_lock(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -161,9 +161,9 @@ STATIC mp_obj_t busio_i2c_obj_try_lock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_try_lock_obj, busio_i2c_obj_try_lock); -//| def unlock(self, ) -> Any: -//| """Releases the I2C lock.""" -//| ... +//| def unlock(self, ) -> Any: +//| """Releases the I2C lock.""" +//| ... STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -172,20 +172,20 @@ STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_unlock_obj, busio_i2c_obj_unlock); -//| def readfrom_into(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None) -> Any: -//| """Read into ``buffer`` from the slave specified by ``address``. -//| The number of bytes read will be the length of ``buffer``. -//| At least one byte must be read. +//| def readfrom_into(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None) -> Any: +//| """Read into ``buffer`` from the slave specified by ``address``. +//| The number of bytes read will be the length of ``buffer``. +//| At least one byte must be read. //| -//| If ``start`` or ``end`` is provided, then the buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like -//| ``buf[start:end]`` will so it saves memory. +//| If ``start`` or ``end`` is provided, then the buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like +//| ``buf[start:end]`` will so it saves memory. //| -//| :param int address: 7-bit device address -//| :param bytearray buffer: buffer to write into -//| :param int start: Index to start writing at -//| :param int end: Index to write up to but not include. Defaults to ``len(buffer)``""" -//| ... +//| :param int address: 7-bit device address +//| :param bytearray buffer: buffer to write into +//| :param int start: Index to start writing at +//| :param int end: Index to write up to but not include. Defaults to ``len(buffer)``""" +//| ... // Shared arg parsing for readfrom_into and writeto_then_readfrom. STATIC void readfrom(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end) { mp_buffer_info_t bufinfo; @@ -223,26 +223,26 @@ STATIC mp_obj_t busio_i2c_readfrom_into(size_t n_args, const mp_obj_t *pos_args, } MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_readfrom_into_obj, 3, busio_i2c_readfrom_into); -//| def writeto(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None, stop: bool = True) -> Any: -//| """Write the bytes from ``buffer`` to the slave specified by ``address``. -//| Transmits a stop bit when stop is True. Setting stop=False is deprecated and stop will be -//| removed in CircuitPython 6.x. Use `writeto_then_readfrom` when needing a write, no stop and -//| repeated start before a read. +//| def writeto(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None, stop: bool = True) -> Any: +//| """Write the bytes from ``buffer`` to the slave specified by ``address``. +//| Transmits a stop bit when stop is True. Setting stop=False is deprecated and stop will be +//| removed in CircuitPython 6.x. Use `writeto_then_readfrom` when needing a write, no stop and +//| repeated start before a read. //| -//| If ``start`` or ``end`` is provided, then the buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like -//| ``buffer[start:end]`` will so it saves memory. +//| If ``start`` or ``end`` is provided, then the buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like +//| ``buffer[start:end]`` will so it saves memory. //| -//| Writing a buffer or slice of length zero is permitted, as it can be used -//| to poll for the existence of a device. +//| Writing a buffer or slice of length zero is permitted, as it can be used +//| to poll for the existence of a device. //| -//| :param int address: 7-bit device address -//| :param bytearray buffer: buffer containing the bytes to write -//| :param int start: Index to start writing from -//| :param int end: Index to read up to but not include. Defaults to ``len(buffer)`` -//| :param bool stop: If true, output an I2C stop condition after the buffer is written. -//| Deprecated. Will be removed in 6.x and act as stop=True.""" -//| ... +//| :param int address: 7-bit device address +//| :param bytearray buffer: buffer containing the bytes to write +//| :param int start: Index to start writing from +//| :param int end: Index to read up to but not include. Defaults to ``len(buffer)`` +//| :param bool stop: If true, output an I2C stop condition after the buffer is written. +//| Deprecated. Will be removed in 6.x and act as stop=True.""" +//| ... // Shared arg parsing for writeto and writeto_then_readfrom. STATIC void writeto(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end, bool stop) { // get the buffer to write the data from @@ -281,23 +281,23 @@ STATIC mp_obj_t busio_i2c_writeto(size_t n_args, const mp_obj_t *pos_args, mp_ma } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_writeto_obj, 1, busio_i2c_writeto); -//| def writeto_then_readfrom(self, address: int, out_buffer: bytearray, in_buffer: bytearray, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> Any: -//| """Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop -//| bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and -//| ``in_buffer`` can be the same buffer because they are used sequentially. +//| def writeto_then_readfrom(self, address: int, out_buffer: bytearray, in_buffer: bytearray, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> Any: +//| """Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop +//| bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and +//| ``in_buffer`` can be the same buffer because they are used sequentially. //| -//| If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]`` -//| will so it saves memory. +//| If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]`` +//| will so it saves memory. //| -//| :param int address: 7-bit device address -//| :param bytearray out_buffer: buffer containing the bytes to write -//| :param bytearray in_buffer: buffer to write into -//| :param int out_start: Index to start writing from -//| :param int out_end: Index to read up to but not include. Defaults to ``len(buffer)`` -//| :param int in_start: Index to start writing at -//| :param int in_end: Index to write up to but not include. Defaults to ``len(buffer)``""" -//| ... +//| :param int address: 7-bit device address +//| :param bytearray out_buffer: buffer containing the bytes to write +//| :param bytearray in_buffer: buffer to write into +//| :param int out_start: Index to start writing from +//| :param int out_end: Index to read up to but not include. Defaults to ``len(buffer)`` +//| :param int in_start: Index to start writing at +//| :param int in_end: Index to write up to but not include. Defaults to ``len(buffer)``""" +//| ... STATIC mp_obj_t busio_i2c_writeto_then_readfrom(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_address, ARG_out_buffer, ARG_in_buffer, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; static const mp_arg_t allowed_args[] = { diff --git a/shared-bindings/busio/OneWire.c b/shared-bindings/busio/OneWire.c index 09a76decc..e44c876c5 100644 --- a/shared-bindings/busio/OneWire.c +++ b/shared-bindings/busio/OneWire.c @@ -79,9 +79,9 @@ STATIC mp_obj_t busio_onewire_make_new(const mp_obj_type_t *type, size_t n_args, return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Deinitialize the OneWire bus and release any hardware resources for reuse.""" -//| ... +//| def deinit(self, ) -> Any: +//| """Deinitialize the OneWire bus and release any hardware resources for reuse.""" +//| ... STATIC mp_obj_t busio_onewire_deinit(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_onewire_deinit(self); @@ -95,15 +95,15 @@ STATIC void check_for_deinit(busio_onewire_obj_t *self) { } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_onewire_deinit(args[0]); @@ -111,12 +111,12 @@ STATIC mp_obj_t busio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_onewire___exit___obj, 4, 4, busio_onewire_obj___exit__); -//| def reset(self, ) -> Any: -//| """Reset the OneWire bus and read presence +//| def reset(self, ) -> Any: +//| """Reset the OneWire bus and read presence //| -//| :returns: False when at least one device is present -//| :rtype: bool""" -//| ... +//| :returns: False when at least one device is present +//| :rtype: bool""" +//| ... STATIC mp_obj_t busio_onewire_obj_reset(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -125,12 +125,12 @@ STATIC mp_obj_t busio_onewire_obj_reset(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_reset_obj, busio_onewire_obj_reset); -//| def read_bit(self, ) -> Any: -//| """Read in a bit +//| def read_bit(self, ) -> Any: +//| """Read in a bit //| -//| :returns: bit state read -//| :rtype: bool""" -//| ... +//| :returns: bit state read +//| :rtype: bool""" +//| ... STATIC mp_obj_t busio_onewire_obj_read_bit(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -139,9 +139,9 @@ STATIC mp_obj_t busio_onewire_obj_read_bit(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_read_bit_obj, busio_onewire_obj_read_bit); -//| def write_bit(self, value: Any) -> Any: -//| """Write out a bit based on value.""" -//| ... +//| def write_bit(self, value: Any) -> Any: +//| """Write out a bit based on value.""" +//| ... STATIC mp_obj_t busio_onewire_obj_write_bit(mp_obj_t self_in, mp_obj_t bool_obj) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/busio/SPI.c b/shared-bindings/busio/SPI.c index 9644f4eb5..93588d087 100644 --- a/shared-bindings/busio/SPI.c +++ b/shared-bindings/busio/SPI.c @@ -101,9 +101,9 @@ STATIC mp_obj_t busio_spi_make_new(const mp_obj_type_t *type, size_t n_args, con return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Turn off the SPI bus.""" -//| ... +//| def deinit(self, ) -> Any: +//| """Turn off the SPI bus.""" +//| ... STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_spi_deinit(self); @@ -111,15 +111,15 @@ STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_deinit_obj, busio_spi_obj_deinit); -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers. -//| Provided by context manager helper.""" -//| ... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers. +//| Provided by context manager helper.""" +//| ... -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_spi_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_spi_deinit(args[0]); @@ -140,28 +140,28 @@ STATIC void check_for_deinit(busio_spi_obj_t *self) { } } -//| def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: -//| """Configures the SPI bus. The SPI object must be locked. +//| def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: +//| """Configures the SPI bus. The SPI object must be locked. //| -//| :param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower -//| due to the granularity of available clock settings. -//| Check the `frequency` attribute for the actual clock rate. -//| :param int polarity: the base state of the clock line (0 or 1) -//| :param int phase: the edge of the clock that data is captured. First (0) -//| or second (1). Rising or falling depends on clock polarity. -//| :param int bits: the number of bits per word +//| :param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower +//| due to the granularity of available clock settings. +//| Check the `frequency` attribute for the actual clock rate. +//| :param int polarity: the base state of the clock line (0 or 1) +//| :param int phase: the edge of the clock that data is captured. First (0) +//| or second (1). Rising or falling depends on clock polarity. +//| :param int bits: the number of bits per word //| -//| .. note:: On the SAMD21, it is possible to set the baudrate to 24 MHz, but that -//| speed is not guaranteed to work. 12 MHz is the next available lower speed, and is -//| within spec for the SAMD21. +//| .. note:: On the SAMD21, it is possible to set the baudrate to 24 MHz, but that +//| speed is not guaranteed to work. 12 MHz is the next available lower speed, and is +//| within spec for the SAMD21. //| -//| .. note:: On the nRF52840, these baudrates are available: 125kHz, 250kHz, 1MHz, 2MHz, 4MHz, -//| and 8MHz. -//| If you pick a a baudrate other than one of these, the nearest lower -//| baudrate will be chosen, with a minimum of 125kHz. -//| Two SPI objects may be created, except on the Circuit Playground Bluefruit, -//| which allows only one (to allow for an additional I2C object).""" -//| ... +//| .. note:: On the nRF52840, these baudrates are available: 125kHz, 250kHz, 1MHz, 2MHz, 4MHz, +//| and 8MHz. +//| If you pick a a baudrate other than one of these, the nearest lower +//| baudrate will be chosen, with a minimum of 125kHz. +//| Two SPI objects may be created, except on the Circuit Playground Bluefruit, +//| which allows only one (to allow for an additional I2C object).""" +//| ... STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_baudrate, ARG_polarity, ARG_phase, ARG_bits }; @@ -198,12 +198,12 @@ STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_ } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_configure_obj, 1, busio_spi_configure); -//| def try_lock(self, ) -> Any: -//| """Attempts to grab the SPI lock. Returns True on success. +//| def try_lock(self, ) -> Any: +//| """Attempts to grab the SPI lock. Returns True on success. //| -//| :return: True when lock has been grabbed -//| :rtype: bool""" -//| ... +//| :return: True when lock has been grabbed +//| :rtype: bool""" +//| ... STATIC mp_obj_t busio_spi_obj_try_lock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -211,9 +211,9 @@ STATIC mp_obj_t busio_spi_obj_try_lock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_try_lock_obj, busio_spi_obj_try_lock); -//| def unlock(self, ) -> Any: -//| """Releases the SPI lock.""" -//| ... +//| def unlock(self, ) -> Any: +//| """Releases the SPI lock.""" +//| ... STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -223,14 +223,14 @@ STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_unlock_obj, busio_spi_obj_unlock); -//| def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any: -//| """Write the data contained in ``buffer``. The SPI object must be locked. -//| If the buffer is empty, nothing happens. +//| def write(self, buffer: bytearray, *, start: Any = 0, end: int = None) -> Any: +//| """Write the data contained in ``buffer``. The SPI object must be locked. +//| If the buffer is empty, nothing happens. //| -//| :param bytearray buffer: Write out the data in this buffer -//| :param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]`` -//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``""" -//| ... +//| :param bytearray buffer: Write out the data in this buffer +//| :param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]`` +//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``""" +//| ... STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end }; @@ -264,16 +264,16 @@ STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_ MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_obj, 2, busio_spi_write); -//| def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any: -//| """Read into ``buffer`` while writing ``write_value`` for each byte read. -//| The SPI object must be locked. -//| If the number of bytes to read is 0, nothing happens. +//| def readinto(self, buffer: bytearray, *, start: Any = 0, end: int = None, write_value: int = 0) -> Any: +//| """Read into ``buffer`` while writing ``write_value`` for each byte read. +//| The SPI object must be locked. +//| If the number of bytes to read is 0, nothing happens. //| -//| :param bytearray buffer: Read data into this buffer -//| :param int start: Start of the slice of ``buffer`` to read into: ``buffer[start:end]`` -//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` -//| :param int write_value: Value to write while reading. (Usually ignored.)""" -//| ... +//| :param bytearray buffer: Read data into this buffer +//| :param int start: Start of the slice of ``buffer`` to read into: ``buffer[start:end]`` +//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` +//| :param int write_value: Value to write while reading. (Usually ignored.)""" +//| ... STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end, ARG_write_value }; @@ -307,20 +307,20 @@ STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_m } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_readinto_obj, 2, busio_spi_readinto); -//| def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: -//| """Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``. -//| The SPI object must be locked. -//| The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]`` -//| must be equal. -//| If buffer slice lengths are both 0, nothing happens. +//| def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: +//| """Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``. +//| The SPI object must be locked. +//| The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]`` +//| must be equal. +//| If buffer slice lengths are both 0, nothing happens. //| -//| :param bytearray buffer_out: Write out the data in this buffer -//| :param bytearray buffer_in: Read data into this buffer -//| :param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]`` -//| :param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)`` -//| :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` -//| :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``""" -//| ... +//| :param bytearray buffer_out: Write out the data in this buffer +//| :param bytearray buffer_in: Read data into this buffer +//| :param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]`` +//| :param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)`` +//| :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` +//| :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``""" +//| ... STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer_out, ARG_buffer_in, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; @@ -369,9 +369,9 @@ STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args } MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_readinto_obj, 2, busio_spi_write_readinto); -//| frequency: Any = ... -//| """The actual SPI bus frequency. This may not match the frequency requested -//| due to internal limitations.""" +//| frequency: Any = ... +//| """The actual SPI bus frequency. This may not match the frequency requested +//| due to internal limitations.""" //| STATIC mp_obj_t busio_spi_obj_get_frequency(mp_obj_t self_in) { diff --git a/shared-bindings/busio/UART.c b/shared-bindings/busio/UART.c index e5d123ce7..7c5c6ec2b 100644 --- a/shared-bindings/busio/UART.c +++ b/shared-bindings/busio/UART.c @@ -141,9 +141,9 @@ STATIC mp_obj_t busio_uart_make_new(const mp_obj_type_t *type, size_t n_args, co return (mp_obj_t)self; } -//| def deinit(self, ) -> Any: -//| """Deinitialises the UART and releases any hardware resources for reuse.""" -//| ... +//| def deinit(self, ) -> Any: +//| """Deinitialises the UART and releases any hardware resources for reuse.""" +//| ... STATIC mp_obj_t busio_uart_obj_deinit(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_uart_deinit(self); @@ -157,15 +157,15 @@ STATIC void check_for_deinit(busio_uart_obj_t *self) { } } -//| def __enter__(self, ) -> Any: -//| """No-op used by Context Managers.""" -//| ... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... // Provided by context manager helper. -//| def __exit__(self, ) -> Any: -//| """Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info.""" -//| ... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t busio_uart_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_uart_deinit(args[0]); @@ -175,40 +175,40 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_ // These are standard stream methods. Code is in py/stream.c. // -//| def read(self, nbytes: Any = None) -> Any: -//| """Read characters. If ``nbytes`` is specified then read at most that many -//| bytes. Otherwise, read everything that arrives until the connection -//| times out. Providing the number of bytes expected is highly recommended -//| because it will be faster. +//| def read(self, nbytes: Any = None) -> Any: +//| """Read characters. If ``nbytes`` is specified then read at most that many +//| bytes. Otherwise, read everything that arrives until the connection +//| times out. Providing the number of bytes expected is highly recommended +//| because it will be faster. //| -//| :return: Data read -//| :rtype: bytes or None""" -//| ... +//| :return: Data read +//| :rtype: bytes or None""" +//| ... -//| def readinto(self, buf: Any) -> Any: -//| """Read bytes into the ``buf``. Read at most ``len(buf)`` bytes. +//| def readinto(self, buf: Any) -> Any: +//| """Read bytes into the ``buf``. Read at most ``len(buf)`` bytes. //| -//| :return: number of bytes read and stored into ``buf`` -//| :rtype: int or None (on a non-blocking error) +//| :return: number of bytes read and stored into ``buf`` +//| :rtype: int or None (on a non-blocking error) //| -//| *New in CircuitPython 4.0:* No length parameter is permitted.""" -//| ... +//| *New in CircuitPython 4.0:* No length parameter is permitted.""" +//| ... -//| def readline(self, ) -> Any: -//| """Read a line, ending in a newline character. +//| def readline(self, ) -> Any: +//| """Read a line, ending in a newline character. //| -//| :return: the line read -//| :rtype: int or None""" -//| ... +//| :return: the line read +//| :rtype: int or None""" +//| ... -//| def write(self, buf: Any) -> Any: -//| """Write the buffer of bytes to the bus. +//| def write(self, buf: Any) -> Any: +//| """Write the buffer of bytes to the bus. //| -//| *New in CircuitPython 4.0:* ``buf`` must be bytes, not a string. +//| *New in CircuitPython 4.0:* ``buf`` must be bytes, not a string. //| -//| :return: the number of bytes written -//| :rtype: int or None""" -//| ... +//| :return: the number of bytes written +//| :rtype: int or None""" +//| ... // These three methods are used by the shared stream methods. STATIC mp_uint_t busio_uart_read(mp_obj_t self_in, void *buf_in, mp_uint_t size, int *errcode) { @@ -252,8 +252,8 @@ STATIC mp_uint_t busio_uart_ioctl(mp_obj_t self_in, mp_uint_t request, mp_uint_t return ret; } -//| baudrate: Any = ... -//| """The current baudrate.""" +//| baudrate: Any = ... +//| """The current baudrate.""" //| STATIC mp_obj_t busio_uart_obj_get_baudrate(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -278,8 +278,8 @@ const mp_obj_property_t busio_uart_baudrate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| in_waiting: Any = ... -//| """The number of bytes in the input buffer, available to be read""" +//| in_waiting: Any = ... +//| """The number of bytes in the input buffer, available to be read""" //| STATIC mp_obj_t busio_uart_obj_get_in_waiting(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -295,8 +295,8 @@ const mp_obj_property_t busio_uart_in_waiting_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| timeout: Any = ... -//| """The current timeout, in seconds (float).""" +//| timeout: Any = ... +//| """The current timeout, in seconds (float).""" //| STATIC mp_obj_t busio_uart_obj_get_timeout(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -323,8 +323,8 @@ const mp_obj_property_t busio_uart_timeout_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| def reset_input_buffer(self, ) -> Any: ... -//| """Discard any unread characters in the input buffer.""" +//| def reset_input_buffer(self, ) -> Any: ... +//| """Discard any unread characters in the input buffer.""" //| STATIC mp_obj_t busio_uart_obj_reset_input_buffer(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -334,7 +334,7 @@ STATIC mp_obj_t busio_uart_obj_reset_input_buffer(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_reset_input_buffer_obj, busio_uart_obj_reset_input_buffer); -//| class busio: +//| class Parity: //| """Enum-like class to define the parity used to verify correct data transfer.""" //| //| def __init__(self, ): -- cgit v1.2.3 From a2a32fea1acc4caefb6c4142b547d8a09b2ba761 Mon Sep 17 00:00:00 2001 From: dherrada Date: Wed, 29 Apr 2020 15:55:06 -0400 Subject: Added newlines after every ellipsis --- shared-bindings/busio/I2C.c | 10 ++++++++++ shared-bindings/busio/OneWire.c | 7 +++++++ shared-bindings/busio/SPI.c | 10 ++++++++++ shared-bindings/busio/UART.c | 9 +++++++++ 4 files changed, 36 insertions(+) diff --git a/shared-bindings/busio/I2C.c b/shared-bindings/busio/I2C.c index 98ccbb512..8ae3658ee 100644 --- a/shared-bindings/busio/I2C.c +++ b/shared-bindings/busio/I2C.c @@ -65,6 +65,7 @@ //| except on the Circuit Playground Bluefruit, which allows two, //| one for the onboard accelerometer, and one for offboard use.""" //| ... +//| STATIC mp_obj_t busio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { busio_i2c_obj_t *self = m_new_obj(busio_i2c_obj_t); self->base.type = &busio_i2c_type; @@ -88,6 +89,7 @@ STATIC mp_obj_t busio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, con //| def deinit(self, ) -> Any: //| """Releases control of the underlying hardware so other classes can use it.""" //| ... +//| STATIC mp_obj_t busio_i2c_obj_deinit(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_i2c_deinit(self); @@ -104,12 +106,14 @@ STATIC void check_for_deinit(busio_i2c_obj_t *self) { //| def __enter__(self, ) -> Any: //| """No-op used in Context Managers.""" //| ... +//| // Provided by context manager helper. //| def __exit__(self, ) -> Any: //| """Automatically deinitializes the hardware on context exit. See //| :ref:`lifetime-and-contextmanagers` for more info.""" //| ... +//| STATIC mp_obj_t busio_i2c_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_i2c_deinit(args[0]); @@ -132,6 +136,7 @@ static void check_lock(busio_i2c_obj_t *self) { //| :return: List of device ids on the I2C bus //| :rtype: list""" //| ... +//| STATIC mp_obj_t busio_i2c_scan(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -154,6 +159,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_scan_obj, busio_i2c_scan); //| :return: True when lock has been grabbed //| :rtype: bool""" //| ... +//| STATIC mp_obj_t busio_i2c_obj_try_lock(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -164,6 +170,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_try_lock_obj, busio_i2c_obj_try_lock); //| def unlock(self, ) -> Any: //| """Releases the I2C lock.""" //| ... +//| STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) { busio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -186,6 +193,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_unlock_obj, busio_i2c_obj_unlock); //| :param int start: Index to start writing at //| :param int end: Index to write up to but not include. Defaults to ``len(buffer)``""" //| ... +//| // Shared arg parsing for readfrom_into and writeto_then_readfrom. STATIC void readfrom(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end) { mp_buffer_info_t bufinfo; @@ -243,6 +251,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_readfrom_into_obj, 3, busio_i2c_readfrom_in //| :param bool stop: If true, output an I2C stop condition after the buffer is written. //| Deprecated. Will be removed in 6.x and act as stop=True.""" //| ... +//| // Shared arg parsing for writeto and writeto_then_readfrom. STATIC void writeto(busio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end, bool stop) { // get the buffer to write the data from @@ -298,6 +307,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_writeto_obj, 1, busio_i2c_writeto); //| :param int in_start: Index to start writing at //| :param int in_end: Index to write up to but not include. Defaults to ``len(buffer)``""" //| ... +//| STATIC mp_obj_t busio_i2c_writeto_then_readfrom(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_address, ARG_out_buffer, ARG_in_buffer, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; static const mp_arg_t allowed_args[] = { diff --git a/shared-bindings/busio/OneWire.c b/shared-bindings/busio/OneWire.c index e44c876c5..556e567ef 100644 --- a/shared-bindings/busio/OneWire.c +++ b/shared-bindings/busio/OneWire.c @@ -63,6 +63,7 @@ //| onewire.write_bit(False) //| print(onewire.read_bit())""" //| ... +//| STATIC mp_obj_t busio_onewire_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_pin }; static const mp_arg_t allowed_args[] = { @@ -82,6 +83,7 @@ STATIC mp_obj_t busio_onewire_make_new(const mp_obj_type_t *type, size_t n_args, //| def deinit(self, ) -> Any: //| """Deinitialize the OneWire bus and release any hardware resources for reuse.""" //| ... +//| STATIC mp_obj_t busio_onewire_deinit(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_onewire_deinit(self); @@ -98,12 +100,14 @@ STATIC void check_for_deinit(busio_onewire_obj_t *self) { //| def __enter__(self, ) -> Any: //| """No-op used by Context Managers.""" //| ... +//| // Provided by context manager helper. //| def __exit__(self, ) -> Any: //| """Automatically deinitializes the hardware when exiting a context. See //| :ref:`lifetime-and-contextmanagers` for more info.""" //| ... +//| STATIC mp_obj_t busio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_onewire_deinit(args[0]); @@ -117,6 +121,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_onewire___exit___obj, 4, 4, bus //| :returns: False when at least one device is present //| :rtype: bool""" //| ... +//| STATIC mp_obj_t busio_onewire_obj_reset(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -131,6 +136,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_reset_obj, busio_onewire_obj_reset); //| :returns: bit state read //| :rtype: bool""" //| ... +//| STATIC mp_obj_t busio_onewire_obj_read_bit(mp_obj_t self_in) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -142,6 +148,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(busio_onewire_read_bit_obj, busio_onewire_obj_read_bit //| def write_bit(self, value: Any) -> Any: //| """Write out a bit based on value.""" //| ... +//| STATIC mp_obj_t busio_onewire_obj_write_bit(mp_obj_t self_in, mp_obj_t bool_obj) { busio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/busio/SPI.c b/shared-bindings/busio/SPI.c index 93588d087..5b1881702 100644 --- a/shared-bindings/busio/SPI.c +++ b/shared-bindings/busio/SPI.c @@ -78,6 +78,7 @@ //| :param ~microcontroller.Pin MOSI: the Master Out Slave In pin. //| :param ~microcontroller.Pin MISO: the Master In Slave Out pin.""" //| ... +//| // TODO(tannewt): Support LSB SPI. @@ -104,6 +105,7 @@ STATIC mp_obj_t busio_spi_make_new(const mp_obj_type_t *type, size_t n_args, con //| def deinit(self, ) -> Any: //| """Turn off the SPI bus.""" //| ... +//| STATIC mp_obj_t busio_spi_obj_deinit(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_spi_deinit(self); @@ -115,11 +117,13 @@ MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_deinit_obj, busio_spi_obj_deinit); //| """No-op used by Context Managers. //| Provided by context manager helper.""" //| ... +//| //| def __exit__(self, ) -> Any: //| """Automatically deinitializes the hardware when exiting a context. See //| :ref:`lifetime-and-contextmanagers` for more info.""" //| ... +//| STATIC mp_obj_t busio_spi_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_spi_deinit(args[0]); @@ -162,6 +166,7 @@ STATIC void check_for_deinit(busio_spi_obj_t *self) { //| Two SPI objects may be created, except on the Circuit Playground Bluefruit, //| which allows only one (to allow for an additional I2C object).""" //| ... +//| STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_baudrate, ARG_polarity, ARG_phase, ARG_bits }; @@ -204,6 +209,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_configure_obj, 1, busio_spi_configure); //| :return: True when lock has been grabbed //| :rtype: bool""" //| ... +//| STATIC mp_obj_t busio_spi_obj_try_lock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -214,6 +220,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_try_lock_obj, busio_spi_obj_try_lock); //| def unlock(self, ) -> Any: //| """Releases the SPI lock.""" //| ... +//| STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) { busio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -231,6 +238,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_unlock_obj, busio_spi_obj_unlock); //| :param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]`` //| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``""" //| ... +//| STATIC mp_obj_t busio_spi_write(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end }; @@ -274,6 +282,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_write_obj, 2, busio_spi_write); //| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` //| :param int write_value: Value to write while reading. (Usually ignored.)""" //| ... +//| STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end, ARG_write_value }; @@ -321,6 +330,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_readinto_obj, 2, busio_spi_readinto); //| :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` //| :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``""" //| ... +//| STATIC mp_obj_t busio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer_out, ARG_buffer_in, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; diff --git a/shared-bindings/busio/UART.c b/shared-bindings/busio/UART.c index 7c5c6ec2b..6a3d542e1 100644 --- a/shared-bindings/busio/UART.c +++ b/shared-bindings/busio/UART.c @@ -64,6 +64,7 @@ //| *New in CircuitPython 4.0:* ``timeout`` has incompatibly changed units from milliseconds to seconds. //| The new upper limit on ``timeout`` is meant to catch mistaken use of milliseconds.""" //| ... +//| typedef struct { mp_obj_base_t base; } busio_uart_parity_obj_t; @@ -144,6 +145,7 @@ STATIC mp_obj_t busio_uart_make_new(const mp_obj_type_t *type, size_t n_args, co //| def deinit(self, ) -> Any: //| """Deinitialises the UART and releases any hardware resources for reuse.""" //| ... +//| STATIC mp_obj_t busio_uart_obj_deinit(mp_obj_t self_in) { busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_busio_uart_deinit(self); @@ -160,12 +162,14 @@ STATIC void check_for_deinit(busio_uart_obj_t *self) { //| def __enter__(self, ) -> Any: //| """No-op used by Context Managers.""" //| ... +//| // Provided by context manager helper. //| def __exit__(self, ) -> Any: //| """Automatically deinitializes the hardware when exiting a context. See //| :ref:`lifetime-and-contextmanagers` for more info.""" //| ... +//| STATIC mp_obj_t busio_uart_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_busio_uart_deinit(args[0]); @@ -184,6 +188,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_ //| :return: Data read //| :rtype: bytes or None""" //| ... +//| //| def readinto(self, buf: Any) -> Any: //| """Read bytes into the ``buf``. Read at most ``len(buf)`` bytes. @@ -193,6 +198,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_ //| //| *New in CircuitPython 4.0:* No length parameter is permitted.""" //| ... +//| //| def readline(self, ) -> Any: //| """Read a line, ending in a newline character. @@ -200,6 +206,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_ //| :return: the line read //| :rtype: int or None""" //| ... +//| //| def write(self, buf: Any) -> Any: //| """Write the buffer of bytes to the bus. @@ -209,6 +216,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_ //| :return: the number of bytes written //| :rtype: int or None""" //| ... +//| // These three methods are used by the shared stream methods. STATIC mp_uint_t busio_uart_read(mp_obj_t self_in, void *buf_in, mp_uint_t size, int *errcode) { @@ -344,6 +352,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_reset_input_buffer_obj, busio_uart_o //| EVEN: Any = ... //| """Total number of ones should be even.""" //| ... +//| const mp_obj_type_t busio_uart_parity_type; const busio_uart_parity_obj_t busio_uart_parity_odd_obj = { -- cgit v1.2.3 From 7ff9b9bc80b3dafd4b263bc8854e4582a21664c2 Mon Sep 17 00:00:00 2001 From: dherrada Date: Wed, 29 Apr 2020 17:36:28 -0400 Subject: Did first 3 --- shared-bindings/analogio/AnalogIn.c | 70 ++++++++------- shared-bindings/analogio/AnalogOut.c | 63 +++++++------ shared-bindings/analogio/__init__.c | 4 +- shared-bindings/audiobusio/I2SOut.c | 161 ++++++++++++++++++---------------- shared-bindings/audiobusio/PDMIn.c | 151 ++++++++++++++++--------------- shared-bindings/audiobusio/__init__.c | 4 +- shared-bindings/audiocore/RawSample.c | 104 ++++++++++++---------- shared-bindings/audiocore/WaveFile.c | 103 +++++++++++----------- shared-bindings/audiocore/__init__.c | 4 +- 9 files changed, 351 insertions(+), 313 deletions(-) diff --git a/shared-bindings/analogio/AnalogIn.c b/shared-bindings/analogio/AnalogIn.c index 9b6ac086b..2fb5051eb 100644 --- a/shared-bindings/analogio/AnalogIn.c +++ b/shared-bindings/analogio/AnalogIn.c @@ -36,25 +36,28 @@ #include "shared-bindings/analogio/AnalogIn.h" #include "shared-bindings/util.h" -//|class AnalogIn: -//|""":class:`AnalogIn` -- read analog voltage -//|============================================ +//| class AnalogIn: +//| """.. currentmodule:: analogio //| -//|Usage:: +//| :class:`AnalogIn` -- read analog voltage +//| ============================================ //| -//|import analogio -//|from board import * +//| Usage:: //| -//|adc = analogio.AnalogIn(A1) -//|val = adc.value""" +//| import analogio +//| from board import * //| -//|def __init__(self, pin: microcontroller.Pin): +//| adc = analogio.AnalogIn(A1) +//| val = adc.value""" //| -//|"""Use the AnalogIn on the given pin. The reference voltage varies by -//|platform so use ``reference_voltage`` to read the configured setting. + +//| def __init__(self, pin: microcontroller.Pin): +//| """Use the AnalogIn on the given pin. The reference voltage varies by +//| platform so use ``reference_voltage`` to read the configured setting. +//| +//| :param ~microcontroller.Pin pin: the pin to read from""" +//| ... //| -//|:param ~microcontroller.Pin pin: the pin to read from""" -//|... STATIC mp_obj_t analogio_analogin_make_new(const mp_obj_type_t *type, mp_uint_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { // check number of arguments @@ -70,9 +73,10 @@ STATIC mp_obj_t analogio_analogin_make_new(const mp_obj_type_t *type, return MP_OBJ_FROM_PTR(self); } -//|def deinit(self, ) -> Any: -//|"""Turn off the AnalogIn and release the pin for other use.""" -//|... +//| def deinit(self, ) -> Any: +//| """Turn off the AnalogIn and release the pin for other use.""" +//| ... +//| STATIC mp_obj_t analogio_analogin_deinit(mp_obj_t self_in) { analogio_analogin_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_analogio_analogin_deinit(self); @@ -85,15 +89,17 @@ STATIC void check_for_deinit(analogio_analogin_obj_t *self) { raise_deinited_error(); } } -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... +//| // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"Automatically deinitializes the hardware when exiting a context. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| STATIC mp_obj_t analogio_analogin___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_analogio_analogin_deinit(args[0]); @@ -101,12 +107,12 @@ STATIC mp_obj_t analogio_analogin___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(analogio_analogin___exit___obj, 4, 4, analogio_analogin___exit__); -//|value: Any = -//|"""The value on the analog pin between 0 and 65535 inclusive (16-bit). (read-only) +//| value: Any = ... +//| """The value on the analog pin between 0 and 65535 inclusive (16-bit). (read-only) +//| +//| Even if the underlying analog to digital converter (ADC) is lower +//| resolution, the value is 16-bit.""" //| -//|Even if the underlying analog to digital converter (ADC) is lower -//|resolution, the value is 16-bit.""" -//|... STATIC mp_obj_t analogio_analogin_obj_get_value(mp_obj_t self_in) { analogio_analogin_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -121,10 +127,10 @@ const mp_obj_property_t analogio_analogin_value_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|reference_voltage: Any = -//|"""The maximum voltage measurable (also known as the reference voltage) as a -//|`float` in Volts.""" -//|... +//| reference_voltage: Any = ... +//| """The maximum voltage measurable (also known as the reference voltage) as a +//| `float` in Volts.""" +//| STATIC mp_obj_t analogio_analogin_obj_get_reference_voltage(mp_obj_t self_in) { analogio_analogin_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/analogio/AnalogOut.c b/shared-bindings/analogio/AnalogOut.c index 231668290..9064bb5dc 100644 --- a/shared-bindings/analogio/AnalogOut.c +++ b/shared-bindings/analogio/AnalogOut.c @@ -36,26 +36,28 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//|class AnalogOut: -//|""".. currentmodule:: analogio +//| class AnalogOut: +//| """.. currentmodule:: analogio //| -//|:class:`AnalogOut` -- output analog voltage -//|============================================ +//| :class:`AnalogOut` -- output analog voltage +//| ============================================ //| -//|The AnalogOut is used to output analog values (a specific voltage). +//| The AnalogOut is used to output analog values (a specific voltage). //| -//|Example usage:: +//| Example usage:: //| -//|import analogio -//|from microcontroller import pin +//| import analogio +//| from microcontroller import pin //| -//|dac = analogio.AnalogOut(pin.PA02) # output on pin PA02 -//|dac.value = 32768 # makes PA02 1.65V""" -//|def __init__(self, pin: microcontroller.Pin): -//|"""Use the AnalogOut on the given pin. +//| dac = analogio.AnalogOut(pin.PA02) # output on pin PA02 +//| dac.value = 32768 # makes PA02 1.65V""" +//| +//| def __init__(self, pin: microcontroller.Pin): +//| """Use the AnalogOut on the given pin. +//| +//| :param ~microcontroller.Pin pin: the pin to output to""" +//| ... //| -//|:param ~microcontroller.Pin pin: the pin to output to""" -//|... STATIC mp_obj_t analogio_analogout_make_new(const mp_obj_type_t *type, mp_uint_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { // check arguments mp_arg_check_num(n_args, kw_args, 1, 1, false); @@ -69,9 +71,10 @@ STATIC mp_obj_t analogio_analogout_make_new(const mp_obj_type_t *type, mp_uint_t return MP_OBJ_FROM_PTR(self); } -//|def deinit(self, ) -> Any: -//|"""Turn off the AnalogOut and release the pin for other use.""" -//|... +//| def deinit(self, ) -> Any: +//| """Turn off the AnalogOut and release the pin for other use.""" +//| ... +//| STATIC mp_obj_t analogio_analogout_deinit(mp_obj_t self_in) { analogio_analogout_obj_t *self = self_in; @@ -81,15 +84,17 @@ STATIC mp_obj_t analogio_analogout_deinit(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(analogio_analogout_deinit_obj, analogio_analogout_deinit); -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... +//| // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware when exiting a context. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| STATIC mp_obj_t analogio_analogout___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_analogio_analogout_deinit(args[0]); @@ -97,12 +102,12 @@ STATIC mp_obj_t analogio_analogout___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(analogio_analogout___exit___obj, 4, 4, analogio_analogout___exit__); -//|value: Any = -//|"""The value on the analog pin between 0 and 65535 inclusive (16-bit). (write-only) +//| value: Any = ... +//| """The value on the analog pin between 0 and 65535 inclusive (16-bit). (write-only) +//| +//| Even if the underlying digital to analog converter (DAC) is lower +//| resolution, the value is 16-bit.""" //| -//|Even if the underlying digital to analog converter (DAC) is lower -//|resolution, the value is 16-bit.""" -//|... STATIC mp_obj_t analogio_analogout_obj_set_value(mp_obj_t self_in, mp_obj_t value) { analogio_analogout_obj_t *self = MP_OBJ_TO_PTR(self_in); if (common_hal_analogio_analogout_deinited(self)) { diff --git a/shared-bindings/analogio/__init__.c b/shared-bindings/analogio/__init__.c index b468bcde0..79627f16a 100644 --- a/shared-bindings/analogio/__init__.c +++ b/shared-bindings/analogio/__init__.c @@ -34,7 +34,7 @@ #include "shared-bindings/analogio/AnalogIn.h" #include "shared-bindings/analogio/AnalogOut.h" -//| :mod:`analogio` --- Analog hardware support +//| """:mod:`analogio` --- Analog hardware support //| ================================================= //| //| .. module:: analogio @@ -70,7 +70,7 @@ //| This example will initialize the the device, read //| :py:data:`~analogio.AnalogIn.value` and then //| :py:meth:`~analogio.AnalogIn.deinit` the hardware. The last step is optional -//| because CircuitPython will do it automatically after the program finishes. +//| because CircuitPython will do it automatically after the program finishes.""" //| STATIC const mp_rom_map_elem_t analogio_module_globals_table[] = { diff --git a/shared-bindings/audiobusio/I2SOut.c b/shared-bindings/audiobusio/I2SOut.c index 765e0a12d..724a65a34 100644 --- a/shared-bindings/audiobusio/I2SOut.c +++ b/shared-bindings/audiobusio/I2SOut.c @@ -35,64 +35,66 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//|class I2SOut: -//|""".. currentmodule:: audiobusio +//| class I2SOut: +//| """.. currentmodule:: audiobusio //| -//|:class:`I2SOut` -- Output an I2S audio signal -//|======================================================== +//| :class:`I2SOut` -- Output an I2S audio signal +//| ======================================================== //| -//|I2S is used to output an audio signal on an I2S bus.""" -//|def __init__(self, bit_clock: microcontroller.Pin, word_select: microcontroller.Pin, data: microcontroller.Pin, *, left_justified: bool): -//|"""Create a I2SOut object associated with the given pins. +//| I2S is used to output an audio signal on an I2S bus.""" //| -//|:param ~microcontroller.Pin bit_clock: The bit clock (or serial clock) pin -//|:param ~microcontroller.Pin word_select: The word select (or left/right clock) pin -//|:param ~microcontroller.Pin data: The data pin -//|:param bool left_justified: True when data bits are aligned with the word select clock. False -//|when they are shifted by one to match classic I2S protocol. +//| def __init__(self, bit_clock: microcontroller.Pin, word_select: microcontroller.Pin, data: microcontroller.Pin, *, left_justified: bool): +//| """Create a I2SOut object associated with the given pins. //| -//|Simple 8ksps 440 Hz sine wave on `Metro M0 Express `_ -//|using `UDA1334 Breakout `_:: +//| :param ~microcontroller.Pin bit_clock: The bit clock (or serial clock) pin +//| :param ~microcontroller.Pin word_select: The word select (or left/right clock) pin +//| :param ~microcontroller.Pin data: The data pin +//| :param bool left_justified: True when data bits are aligned with the word select clock. False +//| when they are shifted by one to match classic I2S protocol. //| -//|import audiobusio -//|import audiocore -//|import board -//|import array -//|import time -//|import math +//| Simple 8ksps 440 Hz sine wave on `Metro M0 Express `_ +//| using `UDA1334 Breakout `_:: //| -//|# Generate one period of sine wave. -//|length = 8000 // 440 -//|sine_wave = array.array("H", [0] * length) -//|for i in range(length): -//|sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) +//| import audiobusio +//| import audiocore +//| import board +//| import array +//| import time +//| import math //| -//|sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) -//|i2s = audiobusio.I2SOut(board.D1, board.D0, board.D9) -//|i2s.play(sine_wave, loop=True) -//|time.sleep(1) -//|i2s.stop() +//| # Generate one period of sine wave. +//| length = 8000 // 440 +//| sine_wave = array.array("H", [0] * length) +//| for i in range(length): +//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) //| -//|Playing a wave file from flash:: +//| sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) +//| i2s = audiobusio.I2SOut(board.D1, board.D0, board.D9) +//| i2s.play(sine_wave, loop=True) +//| time.sleep(1) +//| i2s.stop() //| -//|import board -//|import audioio -//|import audiocore -//|import audiobusio -//|import digitalio +//| Playing a wave file from flash:: //| +//| import board +//| import audioio +//| import audiocore +//| import audiobusio +//| import digitalio //| -//|f = open("cplay-5.1-16bit-16khz.wav", "rb") -//|wav = audiocore.WaveFile(f) //| -//|a = audiobusio.I2SOut(board.D1, board.D0, board.D9) +//| f = open("cplay-5.1-16bit-16khz.wav", "rb") +//| wav = audiocore.WaveFile(f) +//| +//| a = audiobusio.I2SOut(board.D1, board.D0, board.D9) +//| +//| print("playing") +//| a.play(wav) +//| while a.playing: +//| pass +//| print("stopped")""" +//| ... //| -//|print("playing") -//|a.play(wav) -//|while a.playing: -//|pass -//|print("stopped")""" -//|... STATIC mp_obj_t audiobusio_i2sout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_bit_clock, ARG_word_select, ARG_data, ARG_left_justified }; static const mp_arg_t allowed_args[] = { @@ -115,9 +117,10 @@ STATIC mp_obj_t audiobusio_i2sout_make_new(const mp_obj_type_t *type, size_t n_a return MP_OBJ_FROM_PTR(self); } -//|def deinit(self, ) -> Any: -//|"""Deinitialises the I2SOut and releases any hardware resources for reuse.""" -//|... +//| def deinit(self, ) -> Any: +//| """Deinitialises the I2SOut and releases any hardware resources for reuse.""" +//| ... +//| STATIC mp_obj_t audiobusio_i2sout_deinit(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiobusio_i2sout_deinit(self); @@ -130,15 +133,17 @@ STATIC void check_for_deinit(audiobusio_i2sout_obj_t *self) { raise_deinited_error(); } } -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... +//| // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware when exiting a context. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| STATIC mp_obj_t audiobusio_i2sout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiobusio_i2sout_deinit(args[0]); @@ -147,14 +152,15 @@ STATIC mp_obj_t audiobusio_i2sout_obj___exit__(size_t n_args, const mp_obj_t *ar STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiobusio_i2sout___exit___obj, 4, 4, audiobusio_i2sout_obj___exit__); -//|def play(self, sample: Any, *, loop: Any = False) -> Any: -//|"""Plays the sample once when loop=False and continuously when loop=True. -//|Does not block. Use `playing` to block. +//| def play(self, sample: Any, *, loop: Any = False) -> Any: +//| """Plays the sample once when loop=False and continuously when loop=True. +//| Does not block. Use `playing` to block. +//| +//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. //| -//|Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. +//| The sample itself should consist of 8 bit or 16 bit samples.""" +//| ... //| -//|The sample itself should consist of 8 bit or 16 bit samples.""" -//|... STATIC mp_obj_t audiobusio_i2sout_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -173,9 +179,10 @@ STATIC mp_obj_t audiobusio_i2sout_obj_play(size_t n_args, const mp_obj_t *pos_ar } MP_DEFINE_CONST_FUN_OBJ_KW(audiobusio_i2sout_play_obj, 1, audiobusio_i2sout_obj_play); -//|def stop(self, ) -> Any: -//|"""Stops playback.""" -//|... +//| def stop(self, ) -> Any: +//| """Stops playback.""" +//| ... +//| STATIC mp_obj_t audiobusio_i2sout_obj_stop(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -184,9 +191,9 @@ STATIC mp_obj_t audiobusio_i2sout_obj_stop(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiobusio_i2sout_stop_obj, audiobusio_i2sout_obj_stop); -//|playing: Any = -//|"""True when the audio sample is being output. (read-only)""" -//|... +//| playing: Any = ... +//| """True when the audio sample is being output. (read-only)""" +//| STATIC mp_obj_t audiobusio_i2sout_obj_get_playing(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -201,9 +208,10 @@ const mp_obj_property_t audiobusio_i2sout_playing_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|def pause(self, ) -> Any: -//|"""Stops playback temporarily while remembering the position. Use `resume` to resume playback.""" -//|... +//| def pause(self, ) -> Any: +//| """Stops playback temporarily while remembering the position. Use `resume` to resume playback.""" +//| ... +//| STATIC mp_obj_t audiobusio_i2sout_obj_pause(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -216,9 +224,10 @@ STATIC mp_obj_t audiobusio_i2sout_obj_pause(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiobusio_i2sout_pause_obj, audiobusio_i2sout_obj_pause); -//|def resume(self, ) -> Any: -//|"""Resumes sample playback after :py:func:`pause`.""" -//|... +//| def resume(self, ) -> Any: +//| """Resumes sample playback after :py:func:`pause`.""" +//| ... +//| STATIC mp_obj_t audiobusio_i2sout_obj_resume(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -231,9 +240,9 @@ STATIC mp_obj_t audiobusio_i2sout_obj_resume(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiobusio_i2sout_resume_obj, audiobusio_i2sout_obj_resume); -//|paused: Any = -//|"""True when playback is paused. (read-only)""" -//|... +//| paused: Any = ... +//| """True when playback is paused. (read-only)""" +//| STATIC mp_obj_t audiobusio_i2sout_obj_get_paused(mp_obj_t self_in) { audiobusio_i2sout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audiobusio/PDMIn.c b/shared-bindings/audiobusio/PDMIn.c index 28ff9a481..6cc834724 100644 --- a/shared-bindings/audiobusio/PDMIn.c +++ b/shared-bindings/audiobusio/PDMIn.c @@ -36,57 +36,58 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//|class PDMIn: -//|""".. currentmodule:: audiobusio -//| -//|:class:`PDMIn` -- Record an input PDM audio stream -//|======================================================== -//| -//|PDMIn can be used to record an input audio signal on a given set of pins.""" -//| -//|def __init__(self, clock_pin: microcontroller.Pin, data_pin: microcontroller.Pin, *, sample_rate: int = 16000, bit_depth: int = 8, mono: bool = True, oversample: int = 64, startup_delay: float = 0.11): -//|"""Create a PDMIn object associated with the given pins. This allows you to -//|record audio signals from the given pins. Individual ports may put further -//|restrictions on the recording parameters. The overall sample rate is -//|determined by `sample_rate` x ``oversample``, and the total must be 1MHz or -//|higher, so `sample_rate` must be a minimum of 16000. -//| -//|:param ~microcontroller.Pin clock_pin: The pin to output the clock to -//|:param ~microcontroller.Pin data_pin: The pin to read the data from -//|:param int sample_rate: Target sample_rate of the resulting samples. Check `sample_rate` for actual value. -//|Minimum sample_rate is about 16000 Hz. -//|:param int bit_depth: Final number of bits per sample. Must be divisible by 8 -//|:param bool mono: True when capturing a single channel of audio, captures two channels otherwise -//|:param int oversample: Number of single bit samples to decimate into a final sample. Must be divisible by 8 -//|:param float startup_delay: seconds to wait after starting microphone clock -//|to allow microphone to turn on. Most require only 0.01s; some require 0.1s. Longer is safer. -//|Must be in range 0.0-1.0 seconds.""" -//|... - -//|Record 8-bit unsigned samples to buffer:: -//| -//|import audiobusio -//|import board -//| -//|# Prep a buffer to record into -//|b = bytearray(200) -//|with audiobusio.PDMIn(board.MICROPHONE_CLOCK, board.MICROPHONE_DATA, sample_rate=16000) as mic: -//|mic.record(b, len(b)) -//| -//|Record 16-bit unsigned samples to buffer:: -//| -//|import audiobusio -//|import board -//| -//|# Prep a buffer to record into. The array interface doesn't allow for -//|# constructing with a set size so we append to it until we have the size -//|# we want. -//|b = array.array("H") -//|for i in range(200): -//|b.append(0) -//|with audiobusio.PDMIn(board.MICROPHONE_CLOCK, board.MICROPHONE_DATA, sample_rate=16000, bit_depth=16) as mic: -//|mic.record(b, len(b)) -//| +//| class PDMIn: +//| """.. currentmodule:: audiobusio +//| +//| :class:`PDMIn` -- Record an input PDM audio stream +//| ======================================================== +//| +//| PDMIn can be used to record an input audio signal on a given set of pins.""" +//| +//| def __init__(self, clock_pin: microcontroller.Pin, data_pin: microcontroller.Pin, *, sample_rate: int = 16000, bit_depth: int = 8, mono: bool = True, oversample: int = 64, startup_delay: float = 0.11): +//| """Create a PDMIn object associated with the given pins. This allows you to +//| record audio signals from the given pins. Individual ports may put further +//| restrictions on the recording parameters. The overall sample rate is +//| determined by `sample_rate` x ``oversample``, and the total must be 1MHz or +//| higher, so `sample_rate` must be a minimum of 16000. +//| +//| :param ~microcontroller.Pin clock_pin: The pin to output the clock to +//| :param ~microcontroller.Pin data_pin: The pin to read the data from +//| :param int sample_rate: Target sample_rate of the resulting samples. Check `sample_rate` for actual value. +//| Minimum sample_rate is about 16000 Hz. +//| :param int bit_depth: Final number of bits per sample. Must be divisible by 8 +//| :param bool mono: True when capturing a single channel of audio, captures two channels otherwise +//| :param int oversample: Number of single bit samples to decimate into a final sample. Must be divisible by 8 +//| :param float startup_delay: seconds to wait after starting microphone clock +//| to allow microphone to turn on. Most require only 0.01s; some require 0.1s. Longer is safer. +//| Must be in range 0.0-1.0 seconds.""" +//| + +//| """Record 8-bit unsigned samples to buffer:: +//| +//| import audiobusio +//| import board +//| +//| # Prep a buffer to record into +//| b = bytearray(200) +//| with audiobusio.PDMIn(board.MICROPHONE_CLOCK, board.MICROPHONE_DATA, sample_rate=16000) as mic: +//| mic.record(b, len(b)) +//| +//| Record 16-bit unsigned samples to buffer:: +//| +//| import audiobusio +//| import board +//| +//| # Prep a buffer to record into. The array interface doesn't allow for +//| # constructing with a set size so we append to it until we have the size +//| # we want. +//| b = array.array("H") +//| for i in range(200): +//| b.append(0) +//| with audiobusio.PDMIn(board.MICROPHONE_CLOCK, board.MICROPHONE_DATA, sample_rate=16000, bit_depth=16) as mic: +//| mic.record(b, len(b))""" +//| ... +//| STATIC mp_obj_t audiobusio_pdmin_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_clock_pin, ARG_data_pin, ARG_sample_rate, ARG_bit_depth, ARG_mono, ARG_oversample, ARG_startup_delay }; static const mp_arg_t allowed_args[] = { @@ -138,9 +139,10 @@ STATIC mp_obj_t audiobusio_pdmin_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//|def deinit(self, ) -> Any: -//|"""Deinitialises the PDMIn and releases any hardware resources for reuse.""" -//|... +//| def deinit(self, ) -> Any: +//| """Deinitialises the PDMIn and releases any hardware resources for reuse.""" +//| ... +//| STATIC mp_obj_t audiobusio_pdmin_deinit(mp_obj_t self_in) { audiobusio_pdmin_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiobusio_pdmin_deinit(self); @@ -153,14 +155,16 @@ STATIC void check_for_deinit(audiobusio_pdmin_obj_t *self) { raise_deinited_error(); } } -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... +//| // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware when exiting a context.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context.""" +//| ... +//| STATIC mp_obj_t audiobusio_pdmin_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiobusio_pdmin_deinit(args[0]); @@ -169,17 +173,18 @@ STATIC mp_obj_t audiobusio_pdmin_obj___exit__(size_t n_args, const mp_obj_t *arg STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiobusio_pdmin___exit___obj, 4, 4, audiobusio_pdmin_obj___exit__); -//|def record(self, destination: Any, destination_length: Any) -> Any: -//|"""Records destination_length bytes of samples to destination. This is -//|blocking. +//| def record(self, destination: Any, destination_length: Any) -> Any: +//| """Records destination_length bytes of samples to destination. This is +//| blocking. //| -//|An IOError may be raised when the destination is too slow to record the -//|audio at the given rate. For internal flash, writing all 1s to the file -//|before recording is recommended to speed up writes. +//| An IOError may be raised when the destination is too slow to record the +//| audio at the given rate. For internal flash, writing all 1s to the file +//| before recording is recommended to speed up writes. +//| +//| :return: The number of samples recorded. If this is less than ``destination_length``, +//| some samples were missed due to processing time.""" +//| ... //| -//|:return: The number of samples recorded. If this is less than ``destination_length``, -//|some samples were missed due to processing time.""" -//|... STATIC mp_obj_t audiobusio_pdmin_obj_record(mp_obj_t self_obj, mp_obj_t destination, mp_obj_t destination_length) { audiobusio_pdmin_obj_t *self = MP_OBJ_TO_PTR(self_obj); check_for_deinit(self); @@ -210,10 +215,10 @@ STATIC mp_obj_t audiobusio_pdmin_obj_record(mp_obj_t self_obj, mp_obj_t destinat } MP_DEFINE_CONST_FUN_OBJ_3(audiobusio_pdmin_record_obj, audiobusio_pdmin_obj_record); -//|sample_rate: Any = -//|"""The actual sample_rate of the recording. This may not match the constructed -//|sample rate due to internal clock limitations.""" -//|... +//| sample_rate: Any = ... +//| """The actual sample_rate of the recording. This may not match the constructed +//| sample rate due to internal clock limitations.""" +//| STATIC mp_obj_t audiobusio_pdmin_obj_get_sample_rate(mp_obj_t self_in) { audiobusio_pdmin_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audiobusio/__init__.c b/shared-bindings/audiobusio/__init__.c index f7e3a0766..c5c387361 100644 --- a/shared-bindings/audiobusio/__init__.c +++ b/shared-bindings/audiobusio/__init__.c @@ -34,7 +34,7 @@ #include "shared-bindings/audiobusio/I2SOut.h" #include "shared-bindings/audiobusio/PDMIn.h" -//| :mod:`audiobusio` --- Support for audio input and output over digital bus +//| """:mod:`audiobusio` --- Support for audio input and output over digital bus //| ========================================================================= //| //| .. module:: audiobusio @@ -56,7 +56,7 @@ //| //| All libraries change hardware state and should be deinitialized when they //| are no longer needed. To do so, either call :py:meth:`!deinit` or use a -//| context manager. +//| context manager.""" //| STATIC const mp_rom_map_elem_t audiobusio_module_globals_table[] = { diff --git a/shared-bindings/audiocore/RawSample.c b/shared-bindings/audiocore/RawSample.c index fdedfe959..6091fbfc0 100644 --- a/shared-bindings/audiocore/RawSample.c +++ b/shared-bindings/audiocore/RawSample.c @@ -35,45 +35,52 @@ #include "shared-bindings/audiocore/RawSample.h" #include "supervisor/shared/translate.h" -//|class RawSample: -//|""".. currentmodule:: audiocore + + + + + + +//| class RawSample: +//| """.. currentmodule:: audiocore //| -//|:class:`RawSample` -- A raw audio sample buffer -//|======================================================== +//| :class:`RawSample` -- A raw audio sample buffer +//| ======================================================== //| -//|An in-memory sound sample""" +//| An in-memory sound sample""" //| -//|def __init__(self, buffer: array.array, *, channel_count: int = 1, sample_rate: int = 8000): -//|"""Create a RawSample based on the given buffer of signed values. If channel_count is more than -//|1 then each channel's samples should alternate. In other words, for a two channel buffer, the -//|first sample will be for channel 1, the second sample will be for channel two, the third for -//|channel 1 and so on. +//| def __init__(self, buffer: array.array, *, channel_count: int = 1, sample_rate: int = 8000): +//| """Create a RawSample based on the given buffer of signed values. If channel_count is more than +//| 1 then each channel's samples should alternate. In other words, for a two channel buffer, the +//| first sample will be for channel 1, the second sample will be for channel two, the third for +//| channel 1 and so on. //| -//|:param array.array buffer: An `array.array` with samples -//|:param int channel_count: The number of channels in the buffer -//|:param int sample_rate: The desired playback sample rate +//| :param array.array buffer: An `array.array` with samples +//| :param int channel_count: The number of channels in the buffer +//| :param int sample_rate: The desired playback sample rate //| -//|Simple 8ksps 440 Hz sin wave:: +//| Simple 8ksps 440 Hz sin wave:: //| -//|import audiocore -//|import audioio -//|import board -//|import array -//|import time -//|import math +//| import audiocore +//| import audioio +//| import board +//| import array +//| import time +//| import math //| -//|# Generate one period of sine wav. -//|length = 8000 // 440 -//|sine_wave = array.array("h", [0] * length) -//|for i in range(length): -//|sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15)) +//| # Generate one period of sine wav. +//| length = 8000 // 440 +//| sine_wave = array.array("h", [0] * length) +//| for i in range(length): +//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15)) +//| +//| dac = audioio.AudioOut(board.SPEAKER) +//| sine_wave = audiocore.RawSample(sine_wave) +//| dac.play(sine_wave, loop=True) +//| time.sleep(1) +//| dac.stop()""" +//| ... //| -//|dac = audioio.AudioOut(board.SPEAKER) -//|sine_wave = audiocore.RawSample(sine_wave) -//|dac.play(sine_wave, loop=True) -//|time.sleep(1) -//|dac.stop()""" -//|... STATIC mp_obj_t audioio_rawsample_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_channel_count, ARG_sample_rate }; static const mp_arg_t allowed_args[] = { @@ -105,9 +112,10 @@ STATIC mp_obj_t audioio_rawsample_make_new(const mp_obj_type_t *type, size_t n_a return MP_OBJ_FROM_PTR(self); } -//|def deinit(self, ) -> Any: -//|"""Deinitialises the AudioOut and releases any hardware resources for reuse.""" -//|... +//| def deinit(self, ) -> Any: +//| """Deinitialises the AudioOut and releases any hardware resources for reuse.""" +//| ... +//| STATIC mp_obj_t audioio_rawsample_deinit(mp_obj_t self_in) { audioio_rawsample_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audioio_rawsample_deinit(self); @@ -121,15 +129,17 @@ STATIC void check_for_deinit(audioio_rawsample_obj_t *self) { } } -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... +//| // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware when exiting a context. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| STATIC mp_obj_t audioio_rawsample_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audioio_rawsample_deinit(args[0]); @@ -137,12 +147,12 @@ STATIC mp_obj_t audioio_rawsample_obj___exit__(size_t n_args, const mp_obj_t *ar } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audioio_rawsample___exit___obj, 4, 4, audioio_rawsample_obj___exit__); -//|sample_rate: Any = -//|"""32 bit value that dictates how quickly samples are played in Hertz (cycles per second). -//|When the sample is looped, this can change the pitch output without changing the underlying -//|sample. This will not change the sample rate of any active playback. Call ``play`` again to -//|change it.""" -//|... +//| sample_rate: Any = ... +//| """32 bit value that dictates how quickly samples are played in Hertz (cycles per second). +//| When the sample is looped, this can change the pitch output without changing the underlying +//| sample. This will not change the sample rate of any active playback. Call ``play`` again to +//| change it.""" +//| STATIC mp_obj_t audioio_rawsample_obj_get_sample_rate(mp_obj_t self_in) { audioio_rawsample_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audiocore/WaveFile.c b/shared-bindings/audiocore/WaveFile.c index 9116e71f0..65b42fb6c 100644 --- a/shared-bindings/audiocore/WaveFile.c +++ b/shared-bindings/audiocore/WaveFile.c @@ -33,43 +33,45 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//|class WaveFile: -//|""".. currentmodule:: audiocore +//| class WaveFile: +//| """.. currentmodule:: audiocore //| -//|:class:`WaveFile` -- Load a wave file for audio playback -//|======================================================== +//| :class:`WaveFile` -- Load a wave file for audio playback +//| ======================================================== //| -//|A .wav file prepped for audio playback. Only mono and stereo files are supported. Samples must -//|be 8 bit unsigned or 16 bit signed. If a buffer is provided, it will be used instead of allocating -//|an internal buffer.""" -//|def __init__(self, file: typing.BinaryIO, buffer: bytearray): -//|"""Load a .wav file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. +//| A .wav file prepped for audio playback. Only mono and stereo files are supported. Samples must +//| be 8 bit unsigned or 16 bit signed. If a buffer is provided, it will be used instead of allocating +//| an internal buffer.""" //| -//|:param typing.BinaryIO file: Already opened wave file -//|:param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two 512 byte buffers are allocated internally. +//| def __init__(self, file: typing.BinaryIO, buffer: bytearray): +//| """Load a .wav file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. //| +//| :param typing.BinaryIO file: Already opened wave file +//| :param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two 512 byte buffers are allocated internally. //| -//|Playing a wave file from flash:: //| -//|import board -//|import audiocore -//|import audioio -//|import digitalio +//| Playing a wave file from flash:: //| -//|# Required for CircuitPlayground Express -//|speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) -//|speaker_enable.switch_to_output(value=True) +//| import board +//| import audiocore +//| import audioio +//| import digitalio //| -//|data = open("cplay-5.1-16bit-16khz.wav", "rb") -//|wav = audiocore.WaveFile(data) -//|a = audioio.AudioOut(board.A0) +//| # Required for CircuitPlayground Express +//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) +//| speaker_enable.switch_to_output(value=True) +//| +//| data = open("cplay-5.1-16bit-16khz.wav", "rb") +//| wav = audiocore.WaveFile(data) +//| a = audioio.AudioOut(board.A0) +//| +//| print("playing") +//| a.play(wav) +//| while a.playing: +//| pass +//| print("stopped")""" +//| ... //| -//|print("playing") -//|a.play(wav) -//|while a.playing: -//|pass -//|print("stopped")""" -//|... STATIC mp_obj_t audioio_wavefile_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 1, 2, false); @@ -92,9 +94,9 @@ STATIC mp_obj_t audioio_wavefile_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//|def deinit(self, ) -> Any: -//|"""Deinitialises the WaveFile and releases all memory resources for reuse.""" -//|... +//| def deinit(self, ) -> Any: +//| """Deinitialises the WaveFile and releases all memory resources for reuse.""" +//| ... STATIC mp_obj_t audioio_wavefile_deinit(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audioio_wavefile_deinit(self); @@ -108,15 +110,17 @@ STATIC void check_for_deinit(audioio_wavefile_obj_t *self) { } } -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... +//| // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware when exiting a context. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| STATIC mp_obj_t audioio_wavefile_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audioio_wavefile_deinit(args[0]); @@ -124,11 +128,11 @@ STATIC mp_obj_t audioio_wavefile_obj___exit__(size_t n_args, const mp_obj_t *arg } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audioio_wavefile___exit___obj, 4, 4, audioio_wavefile_obj___exit__); -//|sample_rate: Any = -//|"""32 bit value that dictates how quickly samples are loaded into the DAC -//|in Hertz (cycles per second). When the sample is looped, this can change -//|the pitch output without changing the underlying sample.""" -//|... +//| sample_rate: Any = ... +//| """32 bit value that dictates how quickly samples are loaded into the DAC +//| in Hertz (cycles per second). When the sample is looped, this can change +//| the pitch output without changing the underlying sample.""" +//| STATIC mp_obj_t audioio_wavefile_obj_get_sample_rate(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -151,9 +155,9 @@ const mp_obj_property_t audioio_wavefile_sample_rate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|bits_per_sample: Any = -//|"""Bits per sample. (read only)""" -//|... +//| bits_per_sample: Any = ... +//| """Bits per sample. (read only)""" +//| STATIC mp_obj_t audioio_wavefile_obj_get_bits_per_sample(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -167,10 +171,9 @@ const mp_obj_property_t audioio_wavefile_bits_per_sample_obj = { (mp_obj_t)&mp_const_none_obj, (mp_obj_t)&mp_const_none_obj}, }; - -//|channel_count: Any = -//|"""Number of audio channels. (read only)""" -//|... +//| channel_count: Any = ... +//| """Number of audio channels. (read only)""" +//| STATIC mp_obj_t audioio_wavefile_obj_get_channel_count(mp_obj_t self_in) { audioio_wavefile_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audiocore/__init__.c b/shared-bindings/audiocore/__init__.c index cf05112cb..38f91d8ee 100644 --- a/shared-bindings/audiocore/__init__.c +++ b/shared-bindings/audiocore/__init__.c @@ -35,7 +35,7 @@ #include "shared-bindings/audiocore/WaveFile.h" //#include "shared-bindings/audiomixer/Mixer.h" -//| :mod:`audiocore` --- Support for audio samples and mixer +//| """:mod:`audiocore` --- Support for audio samples and mixer //| ======================================================== //| //| .. module:: audiocore @@ -50,7 +50,7 @@ //| :maxdepth: 3 //| //| RawSample -//| WaveFile +//| WaveFile""" //| STATIC const mp_rom_map_elem_t audiocore_module_globals_table[] = { -- cgit v1.2.3 From d65e85104431b354737d11b5ec9a29387d390cfd Mon Sep 17 00:00:00 2001 From: dherrada Date: Thu, 30 Apr 2020 13:06:09 -0400 Subject: Did audioio, audiomixer, audiomp3 --- shared-bindings/audioio/AudioOut.c | 164 +++++++++++++++++--------------- shared-bindings/audioio/__init__.c | 4 +- shared-bindings/audiomixer/Mixer.c | 139 ++++++++++++++------------- shared-bindings/audiomixer/MixerVoice.c | 48 +++++----- shared-bindings/audiomixer/__init__.c | 4 +- shared-bindings/audiomp3/MP3Decoder.c | 111 ++++++++++----------- shared-bindings/audiomp3/__init__.c | 4 +- 7 files changed, 247 insertions(+), 227 deletions(-) diff --git a/shared-bindings/audioio/AudioOut.c b/shared-bindings/audioio/AudioOut.c index 28c345d16..84e5e4422 100644 --- a/shared-bindings/audioio/AudioOut.c +++ b/shared-bindings/audioio/AudioOut.c @@ -36,64 +36,65 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//|class AudioOut: -//|""".. currentmodule:: audioio +//| class AudioOut: +//| """.. currentmodule:: audioio //| -//|:class:`AudioOut` -- Output an analog audio signal -//|======================================================== +//| :class:`AudioOut` -- Output an analog audio signal +//| ======================================================== //| -//|AudioOut can be used to output an analog audio signal on a given pin.""" +//| AudioOut can be used to output an analog audio signal on a given pin.""" //| -//|def __init__(self, left_channel: microcontroller.Pin, *, right_channel: microcontroller.Pin = None, quiescent_value: int = 0x8000): -//|"""Create a AudioOut object associated with the given pin(s). This allows you to -//|play audio signals out on the given pin(s). +//| def __init__(self, left_channel: microcontroller.Pin, *, right_channel: microcontroller.Pin = None, quiescent_value: int = 0x8000): +//| """Create a AudioOut object associated with the given pin(s). This allows you to +//| play audio signals out on the given pin(s). //| -//|:param ~microcontroller.Pin left_channel: The pin to output the left channel to -//|:param ~microcontroller.Pin right_channel: The pin to output the right channel to -//|:param int quiescent_value: The output value when no signal is present. Samples should start -//|and end with this value to prevent audible popping. +//| :param ~microcontroller.Pin left_channel: The pin to output the left channel to +//| :param ~microcontroller.Pin right_channel: The pin to output the right channel to +//| :param int quiescent_value: The output value when no signal is present. Samples should start +//| and end with this value to prevent audible popping. //| -//|Simple 8ksps 440 Hz sin wave:: +//| Simple 8ksps 440 Hz sin wave:: //| -//|import audiocore -//|import audioio -//|import board -//|import array -//|import time -//|import math +//| import audiocore +//| import audioio +//| import board +//| import array +//| import time +//| import math //| -//|# Generate one period of sine wav. -//|length = 8000 // 440 -//|sine_wave = array.array("H", [0] * length) -//|for i in range(length): -//|sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) +//| # Generate one period of sine wav. +//| length = 8000 // 440 +//| sine_wave = array.array("H", [0] * length) +//| for i in range(length): +//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) //| -//|dac = audioio.AudioOut(board.SPEAKER) -//|sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) -//|dac.play(sine_wave, loop=True) -//|time.sleep(1) -//|dac.stop() +//| dac = audioio.AudioOut(board.SPEAKER) +//| sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) +//| dac.play(sine_wave, loop=True) +//| time.sleep(1) +//| dac.stop() //| -//|Playing a wave file from flash:: +//| Playing a wave file from flash:: //| -//|import board -//|import audioio -//|import digitalio +//| import board +//| import audioio +//| import digitalio //| -//|# Required for CircuitPlayground Express -//|speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) -//|speaker_enable.switch_to_output(value=True) +//| # Required for CircuitPlayground Express +//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) +//| speaker_enable.switch_to_output(value=True) //| -//|data = open("cplay-5.1-16bit-16khz.wav", "rb") -//|wav = audiocore.WaveFile(data) -//|a = audioio.AudioOut(board.A0) +//| data = open("cplay-5.1-16bit-16khz.wav", "rb") +//| wav = audiocore.WaveFile(data) +//| a = audioio.AudioOut(board.A0) +//| +//| print("playing") +//| a.play(wav) +//| while a.playing: +//| pass +//| print("stopped")""" +//| ... //| -//|print("playing") -//|a.play(wav) -//|while a.playing: -//|pass -//|print("stopped")""" -//|... STATIC mp_obj_t audioio_audioout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_left_channel, ARG_right_channel, ARG_quiescent_value }; static const mp_arg_t allowed_args[] = { @@ -115,9 +116,10 @@ STATIC mp_obj_t audioio_audioout_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//|def deinit(self, ) -> Any: -//|"""Deinitialises the AudioOut and releases any hardware resources for reuse.""" -//|... +//| def deinit(self, ) -> Any: +//| """Deinitialises the AudioOut and releases any hardware resources for reuse.""" +//| ... +//| STATIC mp_obj_t audioio_audioout_deinit(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audioio_audioout_deinit(self); @@ -130,15 +132,17 @@ STATIC void check_for_deinit(audioio_audioout_obj_t *self) { raise_deinited_error(); } } -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... +//| // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware when exiting a context. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| STATIC mp_obj_t audioio_audioout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audioio_audioout_deinit(args[0]); @@ -147,16 +151,17 @@ STATIC mp_obj_t audioio_audioout_obj___exit__(size_t n_args, const mp_obj_t *arg STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audioio_audioout___exit___obj, 4, 4, audioio_audioout_obj___exit__); -//|def play(self, sample: Any, *, loop: Any = False) -> Any: -//|"""Plays the sample once when loop=False and continuously when loop=True. -//|Does not block. Use `playing` to block. +//| def play(self, sample: Any, *, loop: Any = False) -> Any: +//| """Plays the sample once when loop=False and continuously when loop=True. +//| Does not block. Use `playing` to block. +//| +//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. //| -//|Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. +//| The sample itself should consist of 16 bit samples. Microcontrollers with a lower output +//| resolution will use the highest order bits to output. For example, the SAMD21 has a 10 bit +//| DAC that ignores the lowest 6 bits when playing 16 bit samples.""" +//| ... //| -//|The sample itself should consist of 16 bit samples. Microcontrollers with a lower output -//|resolution will use the highest order bits to output. For example, the SAMD21 has a 10 bit -//|DAC that ignores the lowest 6 bits when playing 16 bit samples.""" -//|... STATIC mp_obj_t audioio_audioout_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -175,9 +180,10 @@ STATIC mp_obj_t audioio_audioout_obj_play(size_t n_args, const mp_obj_t *pos_arg } MP_DEFINE_CONST_FUN_OBJ_KW(audioio_audioout_play_obj, 1, audioio_audioout_obj_play); -//|def stop(self, ) -> Any: -//|"""Stops playback and resets to the start of the sample.""" -//|... +//| def stop(self, ) -> Any: +//| """Stops playback and resets to the start of the sample.""" +//| ... +//| STATIC mp_obj_t audioio_audioout_obj_stop(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -186,9 +192,9 @@ STATIC mp_obj_t audioio_audioout_obj_stop(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audioio_audioout_stop_obj, audioio_audioout_obj_stop); -//|playing: Any = -//|"""True when an audio sample is being output even if `paused`. (read-only)""" -//|... +//| playing: Any = ... +//| """True when an audio sample is being output even if `paused`. (read-only)""" +//| STATIC mp_obj_t audioio_audioout_obj_get_playing(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -203,9 +209,10 @@ const mp_obj_property_t audioio_audioout_playing_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|def pause(self, ) -> Any: -//|"""Stops playback temporarily while remembering the position. Use `resume` to resume playback.""" -//|... +//| def pause(self, ) -> Any: +//| """Stops playback temporarily while remembering the position. Use `resume` to resume playback.""" +//| ... +//| STATIC mp_obj_t audioio_audioout_obj_pause(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -218,9 +225,10 @@ STATIC mp_obj_t audioio_audioout_obj_pause(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audioio_audioout_pause_obj, audioio_audioout_obj_pause); -//|def resume(self, ) -> Any: -//|"""Resumes sample playback after :py:func:`pause`.""" -//|... +//| def resume(self, ) -> Any: +//| """Resumes sample playback after :py:func:`pause`.""" +//| ... +//| STATIC mp_obj_t audioio_audioout_obj_resume(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -233,9 +241,9 @@ STATIC mp_obj_t audioio_audioout_obj_resume(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audioio_audioout_resume_obj, audioio_audioout_obj_resume); -//|paused: Any = -//|"""True when playback is paused. (read-only)""" -//|... +//| paused: Any = ... +//| """True when playback is paused. (read-only)""" +//| STATIC mp_obj_t audioio_audioout_obj_get_paused(mp_obj_t self_in) { audioio_audioout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audioio/__init__.c b/shared-bindings/audioio/__init__.c index 02a5fe1ee..bc2e26cfc 100644 --- a/shared-bindings/audioio/__init__.c +++ b/shared-bindings/audioio/__init__.c @@ -42,7 +42,7 @@ #include "shared-bindings/audiomixer/Mixer.h" #endif -//| :mod:`audioio` --- Support for audio input and output +//| """:mod:`audioio` --- Support for audio input and output //| ====================================================== //| //| .. module:: audioio @@ -68,7 +68,7 @@ //| //| For compatibility with CircuitPython 4.x, some builds allow the items in //| `audiocore` to be imported from `audioio`. This will be removed for all -//| boards in a future build of CircuitPython. +//| boards in a future build of CircuitPython.""" //| STATIC const mp_rom_map_elem_t audioio_module_globals_table[] = { diff --git a/shared-bindings/audiomixer/Mixer.c b/shared-bindings/audiomixer/Mixer.c index 93b1d3635..966581d45 100644 --- a/shared-bindings/audiomixer/Mixer.c +++ b/shared-bindings/audiomixer/Mixer.c @@ -38,50 +38,51 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//|class Mixer: -//|""".. currentmodule:: audiomixer +//| class Mixer: +//| """.. currentmodule:: audiomixer //| -//|:class:`Mixer` -- Mixes one or more audio samples together -//|=========================================================== +//| :class:`Mixer` -- Mixes one or more audio samples together +//| =========================================================== //| -//|Mixer mixes multiple samples into one sample.""" +//| Mixer mixes multiple samples into one sample.""" //| -//|def __init__(self, voice_count: int = 2, buffer_size: int = 1024, channel_count: int = 2, bits_per_sample: int = 16, samples_signed: bool = True, sample_rate: int = 8000): -//|"""Create a Mixer object that can mix multiple channels with the same sample rate. -//|Samples are accessed and controlled with the mixer's `audiomixer.MixerVoice` objects. +//| def __init__(self, voice_count: int = 2, buffer_size: int = 1024, channel_count: int = 2, bits_per_sample: int = 16, samples_signed: bool = True, sample_rate: int = 8000): +//| """Create a Mixer object that can mix multiple channels with the same sample rate. +//| Samples are accessed and controlled with the mixer's `audiomixer.MixerVoice` objects. //| -//|:param int voice_count: The maximum number of voices to mix -//|:param int buffer_size: The total size in bytes of the buffers to mix into -//|:param int channel_count: The number of channels the source samples contain. 1 = mono; 2 = stereo. -//|:param int bits_per_sample: The bits per sample of the samples being played -//|:param bool samples_signed: Samples are signed (True) or unsigned (False) -//|:param int sample_rate: The sample rate to be used for all samples +//| :param int voice_count: The maximum number of voices to mix +//| :param int buffer_size: The total size in bytes of the buffers to mix into +//| :param int channel_count: The number of channels the source samples contain. 1 = mono; 2 = stereo. +//| :param int bits_per_sample: The bits per sample of the samples being played +//| :param bool samples_signed: Samples are signed (True) or unsigned (False) +//| :param int sample_rate: The sample rate to be used for all samples //| -//|Playing a wave file from flash:: +//| Playing a wave file from flash:: //| -//|import board -//|import audioio -//|import audiocore -//|import audiomixer -//|import digitalio +//| import board +//| import audioio +//| import audiocore +//| import audiomixer +//| import digitalio //| -//|a = audioio.AudioOut(board.A0) -//|music = audiocore.WaveFile(open("cplay-5.1-16bit-16khz.wav", "rb")) -//|drum = audiocore.WaveFile(open("drum.wav", "rb")) -//|mixer = audiomixer.Mixer(voice_count=2, sample_rate=16000, channel_count=1, -//|bits_per_sample=16, samples_signed=True) +//| a = audioio.AudioOut(board.A0) +//| music = audiocore.WaveFile(open("cplay-5.1-16bit-16khz.wav", "rb")) +//| drum = audiocore.WaveFile(open("drum.wav", "rb")) +//| mixer = audiomixer.Mixer(voice_count=2, sample_rate=16000, channel_count=1, +//| bits_per_sample=16, samples_signed=True) +//| +//| print("playing") +//| # Have AudioOut play our Mixer source +//| a.play(mixer) +//| # Play the first sample voice +//| mixer.voice[0].play(music) +//| while mixer.playing: +//| # Play the second sample voice +//| mixer.voice[1].play(drum) +//| time.sleep(1) +//| print("stopped")""" +//| ... //| -//|print("playing") -//|# Have AudioOut play our Mixer source -//|a.play(mixer) -//|# Play the first sample voice -//|mixer.voice[0].play(music) -//|while mixer.playing: -//|# Play the second sample voice -//|mixer.voice[1].play(drum) -//|time.sleep(1) -//|print("stopped")""" -//|... STATIC mp_obj_t audiomixer_mixer_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_voice_count, ARG_buffer_size, ARG_channel_count, ARG_bits_per_sample, ARG_samples_signed, ARG_sample_rate }; static const mp_arg_t allowed_args[] = { @@ -125,9 +126,10 @@ STATIC mp_obj_t audiomixer_mixer_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//|def deinit(self, ) -> Any: -//|"""Deinitialises the Mixer and releases any hardware resources for reuse.""" -//|... +//| def deinit(self, ) -> Any: +//| """Deinitialises the Mixer and releases any hardware resources for reuse.""" +//| ... +//| STATIC mp_obj_t audiomixer_mixer_deinit(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiomixer_mixer_deinit(self); @@ -141,15 +143,17 @@ STATIC void check_for_deinit(audiomixer_mixer_obj_t *self) { } } -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... +//| // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware when exiting a context. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| STATIC mp_obj_t audiomixer_mixer_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiomixer_mixer_deinit(args[0]); @@ -157,9 +161,9 @@ STATIC mp_obj_t audiomixer_mixer_obj___exit__(size_t n_args, const mp_obj_t *arg } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiomixer_mixer___exit___obj, 4, 4, audiomixer_mixer_obj___exit__); -//|playing: Any = -//|"""True when any voice is being output. (read-only)""" -//|... +//| playing: Any = ... +//| """True when any voice is being output. (read-only)""" +//| STATIC mp_obj_t audiomixer_mixer_obj_get_playing(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -174,9 +178,9 @@ const mp_obj_property_t audiomixer_mixer_playing_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|sample_rate: Any = -//|"""32 bit value that dictates how quickly samples are played in Hertz (cycles per second).""" -//|... +//| sample_rate: Any = ... +//| """32 bit value that dictates how quickly samples are played in Hertz (cycles per second).""" +//| STATIC mp_obj_t audiomixer_mixer_obj_get_sample_rate(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -191,14 +195,13 @@ const mp_obj_property_t audiomixer_mixer_sample_rate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|voice: Any = -//|"""A tuple of the mixer's `audiomixer.MixerVoice` object(s). +//| voice: Any = ... +//| """A tuple of the mixer's `audiomixer.MixerVoice` object(s). //| -//|.. code-block:: python +//| .. code-block:: python //| -//|>>> mixer.voice -//|(,)""" -//|... +//| >>> mixer.voice +//| (,)""" STATIC mp_obj_t audiomixer_mixer_obj_get_voice(mp_obj_t self_in) { audiomixer_mixer_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -213,14 +216,15 @@ const mp_obj_property_t audiomixer_mixer_voice_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|def play(self, sample: Any, *, voice: Any = 0, loop: Any = False) -> Any: -//|"""Plays the sample once when loop=False and continuously when loop=True. -//|Does not block. Use `playing` to block. +//| def play(self, sample: Any, *, voice: Any = 0, loop: Any = False) -> Any: +//| """Plays the sample once when loop=False and continuously when loop=True. +//| Does not block. Use `playing` to block. //| -//|Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. +//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. +//| +//| The sample must match the Mixer's encoding settings given in the constructor.""" +//| ... //| -//|The sample must match the Mixer's encoding settings given in the constructor.""" -//|... STATIC mp_obj_t audiomixer_mixer_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_voice, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -245,9 +249,10 @@ STATIC mp_obj_t audiomixer_mixer_obj_play(size_t n_args, const mp_obj_t *pos_arg } MP_DEFINE_CONST_FUN_OBJ_KW(audiomixer_mixer_play_obj, 1, audiomixer_mixer_obj_play); -//|def stop_voice(self, voice: Any = 0) -> Any: -//|"""Stops playback of the sample on the given voice.""" -//|... +//| def stop_voice(self, voice: Any = 0) -> Any: +//| """Stops playback of the sample on the given voice.""" +//| ... +//| STATIC mp_obj_t audiomixer_mixer_obj_stop_voice(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_voice }; static const mp_arg_t allowed_args[] = { diff --git a/shared-bindings/audiomixer/MixerVoice.c b/shared-bindings/audiomixer/MixerVoice.c index 299600dd1..257d9507b 100644 --- a/shared-bindings/audiomixer/MixerVoice.c +++ b/shared-bindings/audiomixer/MixerVoice.c @@ -37,18 +37,18 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//|class MixerVoice: -//|""".. currentmodule:: audiomixer +//| class MixerVoice: +//| """.. currentmodule:: audiomixer //| -//|:class:`MixerVoice` -- Voice objects used with Mixer -//|===================================================== +//| :class:`MixerVoice` -- Voice objects used with Mixer +//| ===================================================== //| -//|Used to access and control samples with `audiomixer.Mixer`.""" +//| Used to access and control samples with `audiomixer.Mixer`.""" //| -//|def __init__(self, ): +//| def __init__(self, ): +//| """MixerVoice instance object(s) created by `audiomixer.Mixer`.""" +//| ... //| -//|"""MixerVoice instance object(s) created by `audiomixer.Mixer`.""" -//|... // TODO: support mono or stereo voices STATIC mp_obj_t audiomixer_mixervoice_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { audiomixer_mixervoice_obj_t *self = m_new_obj(audiomixer_mixervoice_obj_t); @@ -59,14 +59,15 @@ STATIC mp_obj_t audiomixer_mixervoice_make_new(const mp_obj_type_t *type, size_t return MP_OBJ_FROM_PTR(self); } -//|def play(self, sample: Any, *, loop: Any = False) -> Any: -//|"""Plays the sample once when ``loop=False``, and continuously when ``loop=True``. -//|Does not block. Use `playing` to block. +//| def play(self, sample: Any, *, loop: Any = False) -> Any: +//| """Plays the sample once when ``loop=False``, and continuously when ``loop=True``. +//| Does not block. Use `playing` to block. //| -//|Sample must be an `audiocore.WaveFile`, `audiomixer.Mixer` or `audiocore.RawSample`. +//| Sample must be an `audiocore.WaveFile`, `audiomixer.Mixer` or `audiocore.RawSample`. +//| +//| The sample must match the `audiomixer.Mixer`'s encoding settings given in the constructor.""" +//| ... //| -//|The sample must match the `audiomixer.Mixer`'s encoding settings given in the constructor.""" -//|... STATIC mp_obj_t audiomixer_mixervoice_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_loop }; static const mp_arg_t allowed_args[] = { @@ -83,9 +84,10 @@ STATIC mp_obj_t audiomixer_mixervoice_obj_play(size_t n_args, const mp_obj_t *po } MP_DEFINE_CONST_FUN_OBJ_KW(audiomixer_mixervoice_play_obj, 1, audiomixer_mixervoice_obj_play); -//|def stop(self, ) -> Any: -//|"""Stops playback of the sample on this voice.""" -//|... +//| def stop(self, ) -> Any: +//| """Stops playback of the sample on this voice.""" +//| ... +//| STATIC mp_obj_t audiomixer_mixervoice_obj_stop(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_voice }; static const mp_arg_t allowed_args[] = { @@ -101,9 +103,9 @@ STATIC mp_obj_t audiomixer_mixervoice_obj_stop(size_t n_args, const mp_obj_t *po } MP_DEFINE_CONST_FUN_OBJ_KW(audiomixer_mixervoice_stop_obj, 1, audiomixer_mixervoice_obj_stop); -//|level(): Any = -//|"""The volume level of a voice, as a floating point number between 0 and 1.""" -//|... +//| level: Any = ... +//| """The volume level of a voice, as a floating point number between 0 and 1.""" +//| STATIC mp_obj_t audiomixer_mixervoice_obj_get_level(mp_obj_t self_in) { return mp_obj_new_float(common_hal_audiomixer_mixervoice_get_level(self_in)); } @@ -137,9 +139,9 @@ const mp_obj_property_t audiomixer_mixervoice_level_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|playing: Any = -//|"""True when this voice is being output. (read-only)""" -//|... +//| playing: Any = ... +//| """True when this voice is being output. (read-only)""" +//| STATIC mp_obj_t audiomixer_mixervoice_obj_get_playing(mp_obj_t self_in) { audiomixer_mixervoice_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/audiomixer/__init__.c b/shared-bindings/audiomixer/__init__.c index 79bab440e..c90a4a0e6 100644 --- a/shared-bindings/audiomixer/__init__.c +++ b/shared-bindings/audiomixer/__init__.c @@ -32,7 +32,7 @@ #include "shared-bindings/microcontroller/Pin.h" #include "shared-bindings/audiomixer/Mixer.h" -//| :mod:`audiomixer` --- Support for audio mixer +//| """:mod:`audiomixer` --- Support for audio mixer //| ======================================================== //| //| .. module:: audiomixer @@ -46,7 +46,7 @@ //| :maxdepth: 3 //| //| Mixer -//| MixerVoice +//| MixerVoice""" //| STATIC const mp_rom_map_elem_t audiomixer_module_globals_table[] = { diff --git a/shared-bindings/audiomp3/MP3Decoder.c b/shared-bindings/audiomp3/MP3Decoder.c index 7c011b65f..d9c85bbf6 100644 --- a/shared-bindings/audiomp3/MP3Decoder.c +++ b/shared-bindings/audiomp3/MP3Decoder.c @@ -34,42 +34,44 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//|class MP3: -//|""".. currentmodule:: audiomp3 +//| class MP3: +//| """.. currentmodule:: audiomp3 //| -//|:class:`MP3Decoder` -- Load a mp3 file for audio playback -//|========================================================= +//| :class:`MP3Decoder` -- Load a mp3 file for audio playback +//| ========================================================= //| -//|An object that decodes MP3 files for playback on an audio device.""" +//| An object that decodes MP3 files for playback on an audio device.""" //| -//|def __init__(self, file: typing.BinaryIO, buffer: bytearray): -//|"""Load a .mp3 file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. +//| def __init__(self, file: typing.BinaryIO, buffer: bytearray): //| -//|:param typing.BinaryIO file: Already opened mp3 file -//|:param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two buffers are allocated internally. The specific buffer size required depends on the mp3 file. +//| """Load a .mp3 file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`. //| +//| :param typing.BinaryIO file: Already opened mp3 file +//| :param bytearray buffer: Optional pre-allocated buffer, that will be split in half and used for double-buffering of the data. If not provided, two buffers are allocated internally. The specific buffer size required depends on the mp3 file. //| -//|Playing a mp3 file from flash:: //| -//|import board -//|import audiomp3 -//|import audioio -//|import digitalio +//| Playing a mp3 file from flash:: //| -//|# Required for CircuitPlayground Express -//|speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) -//|speaker_enable.switch_to_output(value=True) +//| import board +//| import audiomp3 +//| import audioio +//| import digitalio //| -//|data = open("cplay-16bit-16khz-64kbps.mp3", "rb") -//|mp3 = audiomp3.MP3Decoder(data) -//|a = audioio.AudioOut(board.A0) +//| # Required for CircuitPlayground Express +//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) +//| speaker_enable.switch_to_output(value=True) +//| +//| data = open("cplay-16bit-16khz-64kbps.mp3", "rb") +//| mp3 = audiomp3.MP3Decoder(data) +//| a = audioio.AudioOut(board.A0) +//| +//| print("playing") +//| a.play(mp3) +//| while a.playing: +//| pass +//| print("stopped")""" +//| ... //| -//|print("playing") -//|a.play(mp3) -//|while a.playing: -//|pass -//|print("stopped")""" -//|... STATIC mp_obj_t audiomp3_mp3file_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 1, 2, false); @@ -92,9 +94,10 @@ STATIC mp_obj_t audiomp3_mp3file_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//|def deinit(self, ) -> Any: -//|"""Deinitialises the MP3 and releases all memory resources for reuse.""" -//|... +//| def deinit(self, ) -> Any: +//| """Deinitialises the MP3 and releases all memory resources for reuse.""" +//| ... +//| STATIC mp_obj_t audiomp3_mp3file_deinit(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_audiomp3_mp3file_deinit(self); @@ -108,15 +111,17 @@ STATIC void check_for_deinit(audiomp3_mp3file_obj_t *self) { } } -//|def __enter__(self, ) -> Any: -//|"""No-op used by Context Managers.""" -//|... +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... +//| // Provided by context manager helper. -//|def __exit__(self, ) -> Any: -//|"""Automatically deinitializes the hardware when exiting a context. See -//|:ref:`lifetime-and-contextmanagers` for more info.""" -//|... +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| STATIC mp_obj_t audiomp3_mp3file_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiomp3_mp3file_deinit(args[0]); @@ -124,9 +129,9 @@ STATIC mp_obj_t audiomp3_mp3file_obj___exit__(size_t n_args, const mp_obj_t *arg } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiomp3_mp3file___exit___obj, 4, 4, audiomp3_mp3file_obj___exit__); -//|file: Any = -//|"""File to play back.""" -//|... +//| file: Any = ... +//| """File to play back.""" +//| STATIC mp_obj_t audiomp3_mp3file_obj_get_file(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -154,11 +159,11 @@ const mp_obj_property_t audiomp3_mp3file_file_obj = { -//|sample_rate: Any = -//|"""32 bit value that dictates how quickly samples are loaded into the DAC -//|in Hertz (cycles per second). When the sample is looped, this can change -//|the pitch output without changing the underlying sample.""" -//|... +//| sample_rate: Any = ... +//| """32 bit value that dictates how quickly samples are loaded into the DAC +//| in Hertz (cycles per second). When the sample is looped, this can change +//| the pitch output without changing the underlying sample.""" +//| STATIC mp_obj_t audiomp3_mp3file_obj_get_sample_rate(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -181,9 +186,9 @@ const mp_obj_property_t audiomp3_mp3file_sample_rate_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|bits_per_sample: Any = -//|"""Bits per sample. (read only)""" -//|... +//| bits_per_sample: Any = ... +//| """Bits per sample. (read only)""" +//| STATIC mp_obj_t audiomp3_mp3file_obj_get_bits_per_sample(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -198,9 +203,9 @@ const mp_obj_property_t audiomp3_mp3file_bits_per_sample_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|channel_count: Any = -//|"""Number of audio channels. (read only)""" -//|... +//| channel_count: Any = ... +//| """Number of audio channels. (read only)""" +//| STATIC mp_obj_t audiomp3_mp3file_obj_get_channel_count(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -215,9 +220,9 @@ const mp_obj_property_t audiomp3_mp3file_channel_count_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//|rms_level: Any = -//|"""The RMS audio level of a recently played moment of audio. (read only)""" -//|... +//| rms_level: Any = ... +//| """The RMS audio level of a recently played moment of audio. (read only)""" +//| STATIC mp_obj_t audiomp3_mp3file_obj_get_rms_level(mp_obj_t self_in) { audiomp3_mp3file_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); diff --git a/shared-bindings/audiomp3/__init__.c b/shared-bindings/audiomp3/__init__.c index fb2187669..50b29da52 100644 --- a/shared-bindings/audiomp3/__init__.c +++ b/shared-bindings/audiomp3/__init__.c @@ -31,7 +31,7 @@ #include "shared-bindings/audiomp3/MP3Decoder.h" -//| :mod:`audiomp3` --- Support for MP3-compressed audio files +//| """:mod:`audiomp3` --- Support for MP3-compressed audio files //| ========================================================== //| //| .. module:: audiomp3 @@ -44,7 +44,7 @@ //| .. toctree:: //| :maxdepth: 3 //| -//| MP3Decoder +//| MP3Decoder""" //| STATIC const mp_rom_map_elem_t audiomp3_module_globals_table[] = { -- cgit v1.2.3 From 0e465e63b98c3825298219e2144a145208aaff7f Mon Sep 17 00:00:00 2001 From: dherrada Date: Fri, 1 May 2020 18:23:27 -0400 Subject: Did audiopwmio, bitbangio, and _bleio --- shared-bindings/_bleio/Adapter.c | 151 +++++++++++---------- shared-bindings/_bleio/Address.c | 71 +++++----- shared-bindings/_bleio/Attribute.c | 58 ++++---- shared-bindings/_bleio/Characteristic.c | 148 ++++++++++---------- shared-bindings/_bleio/CharacteristicBuffer.c | 81 +++++------ shared-bindings/_bleio/Connection.c | 105 +++++++-------- shared-bindings/_bleio/Descriptor.c | 72 +++++----- shared-bindings/_bleio/PacketBuffer.c | 73 +++++----- shared-bindings/_bleio/ScanEntry.c | 54 ++++---- shared-bindings/_bleio/ScanResults.c | 31 ++--- shared-bindings/_bleio/Service.c | 51 ++++--- shared-bindings/_bleio/UUID.c | 67 +++++----- shared-bindings/_bleio/__init__.c | 38 +++--- shared-bindings/audiopwmio/PWMAudioOut.c | 186 +++++++++++++------------- shared-bindings/audiopwmio/__init__.c | 4 +- shared-bindings/bitbangio/I2C.c | 152 ++++++++++----------- shared-bindings/bitbangio/OneWire.c | 80 +++++------ shared-bindings/bitbangio/SPI.c | 127 +++++++++--------- shared-bindings/bitbangio/__init__.c | 4 +- 19 files changed, 758 insertions(+), 795 deletions(-) diff --git a/shared-bindings/_bleio/Adapter.c b/shared-bindings/_bleio/Adapter.c index 921667f0f..6fb5c323d 100644 --- a/shared-bindings/_bleio/Adapter.c +++ b/shared-bindings/_bleio/Adapter.c @@ -47,35 +47,35 @@ #define INTERVAL_MAX_STRING "40.959375" #define WINDOW_DEFAULT (0.1f) -//| .. currentmodule:: _bleio +//| class Adapter: +//| """.. currentmodule:: _bleio //| -//| :class:`Adapter` --- BLE adapter -//| ---------------------------------------------------- +//| :class:`Adapter` --- BLE adapter +//| ---------------------------------------------------- //| -//| The Adapter manages the discovery and connection to other nearby Bluetooth Low Energy devices. -//| This part of the Bluetooth Low Energy Specification is known as Generic Access Profile (GAP). +//| The Adapter manages the discovery and connection to other nearby Bluetooth Low Energy devices. +//| This part of the Bluetooth Low Energy Specification is known as Generic Access Profile (GAP). //| -//| Discovery of other devices happens during a scanning process that listens for small packets of -//| information, known as advertisements, that are broadcast unencrypted. The advertising packets -//| have two different uses. The first is to broadcast a small piece of data to anyone who cares and -//| and nothing more. These are known as Beacons. The second class of advertisement is to promote -//| additional functionality available after the devices establish a connection. For example, a -//| BLE keyboard may advertise that it can provide key information, but not what the key info is. +//| Discovery of other devices happens during a scanning process that listens for small packets of +//| information, known as advertisements, that are broadcast unencrypted. The advertising packets +//| have two different uses. The first is to broadcast a small piece of data to anyone who cares and +//| and nothing more. These are known as Beacons. The second class of advertisement is to promote +//| additional functionality available after the devices establish a connection. For example, a +//| BLE keyboard may advertise that it can provide key information, but not what the key info is. //| -//| The built-in BLE adapter can do both parts of this process: it can scan for other device -//| advertisements and it can advertise its own data. Furthermore, Adapters can accept incoming -//| connections and also initiate connections. +//| The built-in BLE adapter can do both parts of this process: it can scan for other device +//| advertisements and it can advertise its own data. Furthermore, Adapters can accept incoming +//| connections and also initiate connections.""" //| -//| .. class:: Adapter() -//| -//| You cannot create an instance of `_bleio.Adapter`. -//| Use `_bleio.adapter` to access the sole instance available. +//| def __init__(self, ): +//| """You cannot create an instance of `_bleio.Adapter`. +//| Use `_bleio.adapter` to access the sole instance available.""" +//| ... //| -//| .. attribute:: enabled -//| -//| State of the BLE adapter. +//| enabled: Any = ... +//| """State of the BLE adapter.""" //| STATIC mp_obj_t bleio_adapter_get_enabled(mp_obj_t self) { return mp_obj_new_bool(common_hal_bleio_adapter_get_enabled(self)); @@ -98,9 +98,8 @@ const mp_obj_property_t bleio_adapter_enabled_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: address -//| -//| MAC address of the BLE adapter. (read-only) +//| address: Any = ... +//| """MAC address of the BLE adapter. (read-only)""" //| STATIC mp_obj_t bleio_adapter_get_address(mp_obj_t self) { return MP_OBJ_FROM_PTR(common_hal_bleio_adapter_get_address(self)); @@ -115,11 +114,10 @@ const mp_obj_property_t bleio_adapter_address_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: name -//| -//| name of the BLE adapter used once connected. -//| The name is "CIRCUITPY" + the last four hex digits of ``adapter.address``, -//| to make it easy to distinguish multiple CircuitPython boards. +//| name: Any = ... +//| """name of the BLE adapter used once connected. +//| The name is "CIRCUITPY" + the last four hex digits of ``adapter.address``, +//| to make it easy to distinguish multiple CircuitPython boards.""" //| STATIC mp_obj_t bleio_adapter_get_name(mp_obj_t self) { return MP_OBJ_FROM_PTR(common_hal_bleio_adapter_get_name(self)); @@ -140,18 +138,18 @@ const mp_obj_property_t bleio_adapter_name_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. method:: start_advertising(data, *, scan_response=None, connectable=True, interval=0.1) -//| -//| Starts advertising until `stop_advertising` is called or if connectable, another device -//| connects to us. +//| def start_advertising(self, data: buf, *, scan_response: buf = None, connectable: bool = True, interval: float = 0.1) -> Any: +//| """Starts advertising until `stop_advertising` is called or if connectable, another device +//| connects to us. //| -//| .. warning: If data is longer than 31 bytes, then this will automatically advertise as an -//| extended advertisement that older BLE 4.x clients won't be able to scan for. +//| .. warning: If data is longer than 31 bytes, then this will automatically advertise as an +//| extended advertisement that older BLE 4.x clients won't be able to scan for. //| -//| :param buf data: advertising data packet bytes -//| :param buf scan_response: scan response data packet bytes. ``None`` if no scan response is needed. -//| :param bool connectable: If `True` then other devices are allowed to connect to this peripheral. -//| :param float interval: advertising interval, in seconds +//| :param buf data: advertising data packet bytes +//| :param buf scan_response: scan response data packet bytes. ``None`` if no scan response is needed. +//| :param bool connectable: If `True` then other devices are allowed to connect to this peripheral. +//| :param float interval: advertising interval, in seconds""" +//| ... //| STATIC mp_obj_t bleio_adapter_start_advertising(mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { bleio_adapter_obj_t *self = MP_OBJ_TO_PTR(pos_args[0]); @@ -198,9 +196,10 @@ STATIC mp_obj_t bleio_adapter_start_advertising(mp_uint_t n_args, const mp_obj_t } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(bleio_adapter_start_advertising_obj, 2, bleio_adapter_start_advertising); -//| .. method:: stop_advertising() +//| def stop_advertising(self, ) -> Any: +//| """Stop sending advertising packets.""" +//| ... //| -//| Stop sending advertising packets. STATIC mp_obj_t bleio_adapter_stop_advertising(mp_obj_t self_in) { bleio_adapter_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -210,25 +209,25 @@ STATIC mp_obj_t bleio_adapter_stop_advertising(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(bleio_adapter_stop_advertising_obj, bleio_adapter_stop_advertising); -//| .. method:: start_scan(prefixes=b"", \*, buffer_size=512, extended=False, timeout=None, interval=0.1, window=0.1, minimum_rssi=-80, active=True) +//| def start_scan(self, prefixes: sequence = b"", *, buffer_size: int = 512, extended: bool = False, timeout: float = None, interval: float = 0.1, window: float = 0.1, minimum_rssi: int = -80, active: bool = True) -> Any: +//| """Starts a BLE scan and returns an iterator of results. Advertisements and scan responses are +//| filtered and returned separately. //| -//| Starts a BLE scan and returns an iterator of results. Advertisements and scan responses are -//| filtered and returned separately. -//| -//| :param sequence prefixes: Sequence of byte string prefixes to filter advertising packets -//| with. A packet without an advertising structure that matches one of the prefixes is -//| ignored. Format is one byte for length (n) and n bytes of prefix and can be repeated. -//| :param int buffer_size: the maximum number of advertising bytes to buffer. -//| :param bool extended: When True, support extended advertising packets. Increasing buffer_size is recommended when this is set. -//| :param float timeout: the scan timeout in seconds. If None, will scan until `stop_scan` is called. -//| :param float interval: the interval (in seconds) between the start of two consecutive scan windows -//| Must be in the range 0.0025 - 40.959375 seconds. -//| :param float window: the duration (in seconds) to scan a single BLE channel. -//| window must be <= interval. -//| :param int minimum_rssi: the minimum rssi of entries to return. -//| :param bool active: retrieve scan responses for scannable advertisements. -//| :returns: an iterable of `_bleio.ScanEntry` objects -//| :rtype: iterable +//| :param sequence prefixes: Sequence of byte string prefixes to filter advertising packets +//| with. A packet without an advertising structure that matches one of the prefixes is +//| ignored. Format is one byte for length (n) and n bytes of prefix and can be repeated. +//| :param int buffer_size: the maximum number of advertising bytes to buffer. +//| :param bool extended: When True, support extended advertising packets. Increasing buffer_size is recommended when this is set. +//| :param float timeout: the scan timeout in seconds. If None, will scan until `stop_scan` is called. +//| :param float interval: the interval (in seconds) between the start of two consecutive scan windows +//| Must be in the range 0.0025 - 40.959375 seconds. +//| :param float window: the duration (in seconds) to scan a single BLE channel. +//| window must be <= interval. +//| :param int minimum_rssi: the minimum rssi of entries to return. +//| :param bool active: retrieve scan responses for scannable advertisements. +//| :returns: an iterable of `_bleio.ScanEntry` objects +//| :rtype: iterable""" +//| ... //| STATIC mp_obj_t bleio_adapter_start_scan(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_prefixes, ARG_buffer_size, ARG_extended, ARG_timeout, ARG_interval, ARG_window, ARG_minimum_rssi, ARG_active }; @@ -283,9 +282,10 @@ STATIC mp_obj_t bleio_adapter_start_scan(size_t n_args, const mp_obj_t *pos_args } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(bleio_adapter_start_scan_obj, 1, bleio_adapter_start_scan); -//| .. method:: stop_scan() +//| def stop_scan(self, ) -> Any: +//| """Stop the current scan.""" +//| ... //| -//| Stop the current scan. STATIC mp_obj_t bleio_adapter_stop_scan(mp_obj_t self_in) { bleio_adapter_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -295,10 +295,9 @@ STATIC mp_obj_t bleio_adapter_stop_scan(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(bleio_adapter_stop_scan_obj, bleio_adapter_stop_scan); -//| .. attribute:: connected -//| -//| True when the adapter is connected to another device regardless of who initiated the -//| connection. (read-only) +//| connected: Any = ... +//| """True when the adapter is connected to another device regardless of who initiated the +//| connection. (read-only)""" //| STATIC mp_obj_t bleio_adapter_get_connected(mp_obj_t self) { return mp_obj_new_bool(common_hal_bleio_adapter_get_connected(self)); @@ -313,10 +312,9 @@ const mp_obj_property_t bleio_adapter_connected_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: connections -//| -//| Tuple of active connections including those initiated through -//| :py:meth:`_bleio.Adapter.connect`. (read-only) +//| connections: Any = ... +//| """Tuple of active connections including those initiated through +//| :py:meth:`_bleio.Adapter.connect`. (read-only)""" //| STATIC mp_obj_t bleio_adapter_get_connections(mp_obj_t self) { return common_hal_bleio_adapter_get_connections(self); @@ -330,12 +328,12 @@ const mp_obj_property_t bleio_adapter_connections_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. method:: connect(address, *, timeout) -//| -//| Attempts a connection to the device with the given address. +//| def connect(self, address: Address, *, timeout: float/int) -> Any: +//| """Attempts a connection to the device with the given address. //| -//| :param Address address: The address of the peripheral to connect to -//| :param float/int timeout: Try to connect for timeout seconds. +//| :param Address address: The address of the peripheral to connect to +//| :param float/int timeout: Try to connect for timeout seconds.""" +//| ... //| STATIC mp_obj_t bleio_adapter_connect(mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { bleio_adapter_obj_t *self = MP_OBJ_TO_PTR(pos_args[0]); @@ -360,9 +358,10 @@ STATIC mp_obj_t bleio_adapter_connect(mp_uint_t n_args, const mp_obj_t *pos_args } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(bleio_adapter_connect_obj, 2, bleio_adapter_connect); -//| .. method:: erase_bonding() +//| def erase_bonding(self, ) -> Any: +//| """Erase all bonding information stored in flash memory.""" +//| ... //| -//| Erase all bonding information stored in flash memory. STATIC mp_obj_t bleio_adapter_erase_bonding(mp_obj_t self_in) { bleio_adapter_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/_bleio/Address.c b/shared-bindings/_bleio/Address.c index c31eb604b..2071bd3b2 100644 --- a/shared-bindings/_bleio/Address.c +++ b/shared-bindings/_bleio/Address.c @@ -34,22 +34,23 @@ #include "shared-bindings/_bleio/Address.h" #include "shared-module/_bleio/Address.h" -//| .. currentmodule:: _bleio +//| class Address: +//| """.. currentmodule:: _bleio //| -//| :class:`Address` -- BLE address -//| ========================================================= +//| :class:`Address` -- BLE address +//| ========================================================= //| -//| Encapsulates the address of a BLE device. +//| Encapsulates the address of a BLE device.""" //| -//| .. class:: Address(address, address_type) +//| def __init__(self, address: buf, address_type: Any): +//| """Create a new Address object encapsulating the address value. +//| The value itself can be one of: //| -//| Create a new Address object encapsulating the address value. -//| The value itself can be one of: -//| -//| :param buf address: The address value to encapsulate. A buffer object (bytearray, bytes) of 6 bytes. -//| :param int address_type: one of the integer values: `PUBLIC`, `RANDOM_STATIC`, -//| `RANDOM_PRIVATE_RESOLVABLE`, or `RANDOM_PRIVATE_NON_RESOLVABLE`. +//| :param buf address: The address value to encapsulate. A buffer object (bytearray, bytes) of 6 bytes. +//| :param int address_type: one of the integer values: `PUBLIC`, `RANDOM_STATIC`, +//| `RANDOM_PRIVATE_RESOLVABLE`, or `RANDOM_PRIVATE_NON_RESOLVABLE`.""" +//| ... //| STATIC mp_obj_t bleio_address_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_address, ARG_address_type }; @@ -81,9 +82,8 @@ STATIC mp_obj_t bleio_address_make_new(const mp_obj_type_t *type, size_t n_args, return MP_OBJ_FROM_PTR(self); } -//| .. attribute:: address_bytes -//| -//| The bytes that make up the device address (read-only). +//| address_bytes: Any = ... +//| """The bytes that make up the device address (read-only). //| //| Note that the ``bytes`` object returned is in little-endian order: //| The least significant byte is ``address_bytes[0]``. So the address will @@ -97,7 +97,7 @@ STATIC mp_obj_t bleio_address_make_new(const mp_obj_type_t *type, size_t n_args, //| >>> _bleio.adapter.address //|
//| >>> _bleio.adapter.address.address_bytes -//| b'5\xa8\xed\xf5\x1d\xc8' +//| b'5\xa8\xed\xf5\x1d\xc8'""" //| STATIC mp_obj_t bleio_address_get_address_bytes(mp_obj_t self_in) { bleio_address_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -113,12 +113,11 @@ const mp_obj_property_t bleio_address_address_bytes_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: type -//| -//| The address type (read-only). +//| type: Any = ... +//| """The address type (read-only). //| //| One of the integer values: `PUBLIC`, `RANDOM_STATIC`, `RANDOM_PRIVATE_RESOLVABLE`, -//| or `RANDOM_PRIVATE_NON_RESOLVABLE`. +//| or `RANDOM_PRIVATE_NON_RESOLVABLE`.""" //| STATIC mp_obj_t bleio_address_get_type(mp_obj_t self_in) { bleio_address_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -134,9 +133,9 @@ const mp_obj_property_t bleio_address_type_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: __eq__(other) -//| -//| Two Address objects are equal if their addresses and address types are equal. +//| def __eq__(self, other: Any) -> Any: +//| """Two Address objects are equal if their addresses and address types are equal.""" +//| ... //| STATIC mp_obj_t bleio_address_binary_op(mp_binary_op_t op, mp_obj_t lhs_in, mp_obj_t rhs_in) { switch (op) { @@ -160,9 +159,9 @@ STATIC mp_obj_t bleio_address_binary_op(mp_binary_op_t op, mp_obj_t lhs_in, mp_o } } -//| .. method:: __hash__() -//| -//| Returns a hash for the Address data. +//| def __hash__(self, ) -> Any: +//| """Returns a hash for the Address data.""" +//| ... //| STATIC mp_obj_t bleio_address_unary_op(mp_unary_op_t op, mp_obj_t self_in) { switch (op) { @@ -193,22 +192,18 @@ STATIC void bleio_address_print(const mp_print_t *print, mp_obj_t self_in, mp_pr buf[5], buf[4], buf[3], buf[2], buf[1], buf[0]); } -//| .. data:: PUBLIC -//| -//| A publicly known address, with a company ID (high 24 bits)and company-assigned part (low 24 bits). -//| -//| .. data:: RANDOM_STATIC -//| -//| A randomly generated address that does not change often. It may never change or may change after -//| a power cycle. -//| -//| .. data:: RANDOM_PRIVATE_RESOLVABLE +//| PUBLIC: Any = ... +//| """A publicly known address, with a company ID (high 24 bits)and company-assigned part (low 24 bits).""" //| -//| An address that is usable when the peer knows the other device's secret Identity Resolving Key (IRK). +//| RANDOM_STATIC: Any = ... +//| """A randomly generated address that does not change often. It may never change or may change after +//| a power cycle.""" //| -//| .. data:: RANDOM_PRIVATE_NON_RESOLVABLE +//| RANDOM_PRIVATE_RESOLVABLE: Any = ... +//| """An address that is usable when the peer knows the other device's secret Identity Resolving Key (IRK).""" //| -//| A randomly generated address that changes on every connection. +//| RANDOM_PRIVATE_NON_RESOLVABLE: Any = ... +//| """A randomly generated address that changes on every connection.""" //| STATIC const mp_rom_map_elem_t bleio_address_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_address_bytes), MP_ROM_PTR(&bleio_address_address_bytes_obj) }, diff --git a/shared-bindings/_bleio/Attribute.c b/shared-bindings/_bleio/Attribute.c index 2d8b15b9f..72fd13d1c 100644 --- a/shared-bindings/_bleio/Attribute.c +++ b/shared-bindings/_bleio/Attribute.c @@ -29,52 +29,44 @@ #include "shared-bindings/_bleio/Characteristic.h" #include "shared-bindings/_bleio/UUID.h" -// - -//| .. currentmodule:: _bleio -//| -//| :class:`Attribute` -- BLE Attribute -//| ========================================================= +//| class Attribute: +//| """.. currentmodule:: _bleio //| -//| Definitions associated with all BLE attributes: characteristics, descriptors, etc. -//| :py:class:`~_bleio.Attribute` is, notionally, a superclass of -//| :py:class:`~Characteristic` and :py:class:`~Descriptor`, -//| but is not defined as a Python superclass of those classes. +//| :class:`Attribute` -- BLE Attribute +//| ========================================================= //| -//| .. class:: Attribute() +//| Definitions associated with all BLE attributes: characteristics, descriptors, etc. +//| :py:class:`~_bleio.Attribute` is, notionally, a superclass of +//| :py:class:`~Characteristic` and :py:class:`~Descriptor`, +//| but is not defined as a Python superclass of those classes.""" //| -//| You cannot create an instance of :py:class:`~_bleio.Attribute`. +//| def __init__(self, ): +//| """You cannot create an instance of :py:class:`~_bleio.Attribute`.""" +//| ... //| STATIC const mp_rom_map_elem_t bleio_attribute_locals_dict_table[] = { -//| .. data:: NO_ACCESS -//| -//| security mode: access not allowed -//| -//| .. data:: OPEN -//| -//| security_mode: no security (link is not encrypted) -//| -//| .. data:: ENCRYPT_NO_MITM -//| -//| security_mode: unauthenticated encryption, without man-in-the-middle protection -//| -//| .. data:: ENCRYPT_WITH_MITM -//| -//| security_mode: authenticated encryption, with man-in-the-middle protection +//| NO_ACCESS: Any = ... +//| """security mode: access not allowed""" //| -//| .. data:: LESC_ENCRYPT_WITH_MITM +//| OPEN: Any = ... +//| """security_mode: no security (link is not encrypted)""" //| -//| security_mode: LESC encryption, with man-in-the-middle protection +//| ENCRYPT_NO_MITM: Any = ... +//| """security_mode: unauthenticated encryption, without man-in-the-middle protection""" //| -//| .. data:: SIGNED_NO_MITM +//| ENCRYPT_WITH_MITM: Any = ... +//| """security_mode: authenticated encryption, with man-in-the-middle protection""" //| -//| security_mode: unauthenticated data signing, without man-in-the-middle protection +//| LESC_ENCRYPT_WITH_MITM: Any = ... +//| """security_mode: LESC encryption, with man-in-the-middle protection""" //| -//| .. data:: SIGNED_WITH_MITM +//| SIGNED_NO_MITM: Any = ... +//| """security_mode: unauthenticated data signing, without man-in-the-middle protection""" //| -//| security_mode: authenticated data signing, without man-in-the-middle protection +//| SIGNED_WITH_MITM: Any = ... +//| """security_mode: authenticated data signing, without man-in-the-middle protection""" //| { MP_ROM_QSTR(MP_QSTR_NO_ACCESS), MP_ROM_INT(SECURITY_MODE_NO_ACCESS) }, { MP_ROM_QSTR(MP_QSTR_OPEN), MP_ROM_INT(SECURITY_MODE_OPEN) }, diff --git a/shared-bindings/_bleio/Characteristic.c b/shared-bindings/_bleio/Characteristic.c index e55191f7c..f8f18d0bd 100644 --- a/shared-bindings/_bleio/Characteristic.c +++ b/shared-bindings/_bleio/Characteristic.c @@ -33,45 +33,46 @@ #include "shared-bindings/_bleio/Service.h" #include "shared-bindings/_bleio/UUID.h" -//| .. currentmodule:: _bleio -//| -//| :class:`Characteristic` -- BLE service characteristic -//| ========================================================= -//| -//| Stores information about a BLE service characteristic and allows reading -//| and writing of the characteristic's value. -//| -//| .. class:: Characteristic -//| -//| There is no regular constructor for a Characteristic. A new local Characteristic can be created -//| and attached to a Service by calling `add_to_service()`. -//| Remote Characteristic objects are created by `Connection.discover_remote_services()` -//| as part of remote Services. -//| - -//| .. method:: add_to_service(service, uuid, *, properties=0, read_perm=Attribute.OPEN, write_perm=Attribute.OPEN, max_length=20, fixed_length=False, initial_value=None) -//| -//| Create a new Characteristic object, and add it to this Service. -//| -//| :param Service service: The service that will provide this characteristic -//| :param UUID uuid: The uuid of the characteristic -//| :param int properties: The properties of the characteristic, -//| specified as a bitmask of these values bitwise-or'd together: -//| `BROADCAST`, `INDICATE`, `NOTIFY`, `READ`, `WRITE`, `WRITE_NO_RESPONSE`. -//| :param int read_perm: Specifies whether the characteristic can be read by a client, and if so, which -//| security mode is required. Must be one of the integer values `Attribute.NO_ACCESS`, `Attribute.OPEN`, -//| `Attribute.ENCRYPT_NO_MITM`, `Attribute.ENCRYPT_WITH_MITM`, `Attribute.LESC_ENCRYPT_WITH_MITM`, -//| `Attribute.SIGNED_NO_MITM`, or `Attribute.SIGNED_WITH_MITM`. -//| :param int write_perm: Specifies whether the characteristic can be written by a client, and if so, which -//| security mode is required. Values allowed are the same as ``read_perm``. -//| :param int max_length: Maximum length in bytes of the characteristic value. The maximum allowed is -//| is 512, or possibly 510 if ``fixed_length`` is False. The default, 20, is the maximum -//| number of data bytes that fit in a single BLE 4.x ATT packet. -//| :param bool fixed_length: True if the characteristic value is of fixed length. -//| :param buf initial_value: The initial value for this characteristic. If not given, will be -//| filled with zeros. -//| -//| :return: the new Characteristic. +//| class Characteristic: +//| """.. currentmodule:: _bleio +//| +//| :class:`Characteristic` -- BLE service characteristic +//| ========================================================= +//| +//| Stores information about a BLE service characteristic and allows reading +//| and writing of the characteristic's value.""" +//| +//| def __init__(self, ): +//| """There is no regular constructor for a Characteristic. A new local Characteristic can be created +//| and attached to a Service by calling `add_to_service()`. +//| Remote Characteristic objects are created by `Connection.discover_remote_services()` +//| as part of remote Services.""" +//| ... +//| + +//| def add_to_service(self, service: Service, uuid: UUID, *, properties: int = 0, read_perm: int = Attribute.OPEN, write_perm: int = Attribute.OPEN, max_length: int = 20, fixed_length: bool = False, initial_value: buf = None) -> Any: +//| """Create a new Characteristic object, and add it to this Service. +//| +//| :param Service service: The service that will provide this characteristic +//| :param UUID uuid: The uuid of the characteristic +//| :param int properties: The properties of the characteristic, +//| specified as a bitmask of these values bitwise-or'd together: +//| `BROADCAST`, `INDICATE`, `NOTIFY`, `READ`, `WRITE`, `WRITE_NO_RESPONSE`. +//| :param int read_perm: Specifies whether the characteristic can be read by a client, and if so, which +//| security mode is required. Must be one of the integer values `Attribute.NO_ACCESS`, `Attribute.OPEN`, +//| `Attribute.ENCRYPT_NO_MITM`, `Attribute.ENCRYPT_WITH_MITM`, `Attribute.LESC_ENCRYPT_WITH_MITM`, +//| `Attribute.SIGNED_NO_MITM`, or `Attribute.SIGNED_WITH_MITM`. +//| :param int write_perm: Specifies whether the characteristic can be written by a client, and if so, which +//| security mode is required. Values allowed are the same as ``read_perm``. +//| :param int max_length: Maximum length in bytes of the characteristic value. The maximum allowed is +//| is 512, or possibly 510 if ``fixed_length`` is False. The default, 20, is the maximum +//| number of data bytes that fit in a single BLE 4.x ATT packet. +//| :param bool fixed_length: True if the characteristic value is of fixed length. +//| :param buf initial_value: The initial value for this characteristic. If not given, will be +//| filled with zeros. +//| +//| :return: the new Characteristic.""" +//| ... //| STATIC mp_obj_t bleio_characteristic_add_to_service(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { // class is arg[0], which we can ignore. @@ -145,11 +146,10 @@ STATIC MP_DEFINE_CONST_CLASSMETHOD_OBJ(bleio_characteristic_add_to_service_obj, -//| .. attribute:: properties -//| -//| An int bitmask representing which properties are set, specified as bitwise or'ing of +//| properties: Any = ... +//| """An int bitmask representing which properties are set, specified as bitwise or'ing of //| of these possible values. -//| `BROADCAST`, `INDICATE`, `NOTIFY`, `READ`, `WRITE`, `WRITE_NO_RESPONSE`. +//| `BROADCAST`, `INDICATE`, `NOTIFY`, `READ`, `WRITE`, `WRITE_NO_RESPONSE`.""" //| STATIC mp_obj_t bleio_characteristic_get_properties(mp_obj_t self_in) { bleio_characteristic_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -165,11 +165,10 @@ const mp_obj_property_t bleio_characteristic_properties_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: uuid -//| -//| The UUID of this characteristic. (read-only) +//| uuid: Any = ... +//| """The UUID of this characteristic. (read-only) //| -//| Will be ``None`` if the 128-bit UUID for this characteristic is not known. +//| Will be ``None`` if the 128-bit UUID for this characteristic is not known.""" //| STATIC mp_obj_t bleio_characteristic_get_uuid(mp_obj_t self_in) { bleio_characteristic_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -186,9 +185,8 @@ const mp_obj_property_t bleio_characteristic_uuid_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: value -//| -//| The value of this characteristic. +//| value: Any = ... +//| """The value of this characteristic.""" //| STATIC mp_obj_t bleio_characteristic_get_value(mp_obj_t self_in) { bleio_characteristic_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -218,9 +216,8 @@ const mp_obj_property_t bleio_characteristic_value_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: descriptors -//| -//| A tuple of :py:class:`Descriptor` that describe this characteristic. (read-only) +//| descriptors: Any = ... +//| """A tuple of :py:class:`Descriptor` that describe this characteristic. (read-only)""" //| STATIC mp_obj_t bleio_characteristic_get_descriptors(mp_obj_t self_in) { bleio_characteristic_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -249,9 +246,8 @@ const mp_obj_property_t bleio_characteristic_descriptors_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: service (read-only) -//| -//| The Service this Characteristic is a part of. +//| service: Any = ... +//| """The Service this Characteristic is a part of.""" //| STATIC mp_obj_t bleio_characteristic_get_service(mp_obj_t self_in) { bleio_characteristic_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -267,12 +263,12 @@ const mp_obj_property_t bleio_characteristic_service_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. method:: set_cccd(*, notify=False, indicate=False) +//| def set_cccd(self, *, notify: bool = False, indicate: float = False) -> Any: +//| """Set the remote characteristic's CCCD to enable or disable notification and indication. //| -//| Set the remote characteristic's CCCD to enable or disable notification and indication. -//| -//| :param bool notify: True if Characteristic should receive notifications of remote writes -//| :param float indicate: True if Characteristic should receive indications of remote writes +//| :param bool notify: True if Characteristic should receive notifications of remote writes +//| :param float indicate: True if Characteristic should receive indications of remote writes""" +//| ... //| STATIC mp_obj_t bleio_characteristic_set_cccd(mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { bleio_characteristic_obj_t *self = MP_OBJ_TO_PTR(pos_args[0]); @@ -300,29 +296,23 @@ STATIC const mp_rom_map_elem_t bleio_characteristic_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_set_cccd), MP_ROM_PTR(&bleio_characteristic_set_cccd_obj) }, // Bitmask constants to represent properties -//| .. data:: BROADCAST -//| -//| property: allowed in advertising packets -//| -//| .. data:: INDICATE -//| -//| property: server will indicate to the client when the value is set and wait for a response -//| -//| .. data:: NOTIFY -//| -//| property: server will notify the client when the value is set -//| -//| .. data:: READ +//| BROADCAST: Any = ... +//| """property: allowed in advertising packets""" //| -//| property: clients may read this characteristic +//| INDICATE: Any = ... +//| """property: server will indicate to the client when the value is set and wait for a response""" //| -//| .. data:: WRITE +//| NOTIFY: Any = ... +//| """property: server will notify the client when the value is set""" //| -//| property: clients may write this characteristic; a response will be sent back +//| READ: Any = ... +//| """property: clients may read this characteristic""" //| -//| .. data:: WRITE_NO_RESPONSE +//| WRITE: Any = ... +//| """property: clients may write this characteristic; a response will be sent back""" //| -//| property: clients may write this characteristic; no response will be sent back +//| WRITE_NO_RESPONSE: Any = ... +//| """property: clients may write this characteristic; no response will be sent back""" //| { MP_ROM_QSTR(MP_QSTR_BROADCAST), MP_ROM_INT(CHAR_PROP_BROADCAST) }, { MP_ROM_QSTR(MP_QSTR_INDICATE), MP_ROM_INT(CHAR_PROP_INDICATE) }, diff --git a/shared-bindings/_bleio/CharacteristicBuffer.c b/shared-bindings/_bleio/CharacteristicBuffer.c index fc95d0d50..f38f650d9 100644 --- a/shared-bindings/_bleio/CharacteristicBuffer.c +++ b/shared-bindings/_bleio/CharacteristicBuffer.c @@ -41,24 +41,26 @@ STATIC void raise_error_if_not_connected(bleio_characteristic_buffer_obj_t *self } } -//| .. currentmodule:: _bleio +//| class CharacteristicBuffer: +//| """.. currentmodule:: _bleio //| -//| :class:`CharacteristicBuffer` -- BLE Service incoming values buffer. -//| ===================================================================== +//| :class:`CharacteristicBuffer` -- BLE Service incoming values buffer. +//| ===================================================================== //| -//| Accumulates a Characteristic's incoming values in a FIFO buffer. +//| Accumulates a Characteristic's incoming values in a FIFO buffer.""" //| -//| .. class:: CharacteristicBuffer(characteristic, *, timeout=1, buffer_size=64) +//| def __init__(self, characteristic: Characteristic, *, timeout: int = 1, buffer_size: int = 64): //| -//| Monitor the given Characteristic. Each time a new value is written to the Characteristic -//| add the newly-written bytes to a FIFO buffer. +//| """Monitor the given Characteristic. Each time a new value is written to the Characteristic +//| add the newly-written bytes to a FIFO buffer. //| -//| :param Characteristic characteristic: The Characteristic to monitor. -//| It may be a local Characteristic provided by a Peripheral Service, or a remote Characteristic -//| in a remote Service that a Central has connected to. -//| :param int timeout: the timeout in seconds to wait for the first character and between subsequent characters. -//| :param int buffer_size: Size of ring buffer that stores incoming data coming from client. -//| Must be >= 1. +//| :param Characteristic characteristic: The Characteristic to monitor. +//| It may be a local Characteristic provided by a Peripheral Service, or a remote Characteristic +//| in a remote Service that a Central has connected to. +//| :param int timeout: the timeout in seconds to wait for the first character and between subsequent characters. +//| :param int buffer_size: Size of ring buffer that stores incoming data coming from client. +//| Must be >= 1.""" +//| ... //| STATIC mp_obj_t bleio_characteristic_buffer_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_characteristic, ARG_timeout, ARG_buffer_size, }; @@ -103,29 +105,29 @@ STATIC void check_for_deinit(bleio_characteristic_buffer_obj_t *self) { // These are standard stream methods. Code is in py/stream.c. // -//| .. method:: read(nbytes=None) +//| def read(self, nbytes: Any = None) -> Any: +//| """Read characters. If ``nbytes`` is specified then read at most that many +//| bytes. Otherwise, read everything that arrives until the connection +//| times out. Providing the number of bytes expected is highly recommended +//| because it will be faster. //| -//| Read characters. If ``nbytes`` is specified then read at most that many -//| bytes. Otherwise, read everything that arrives until the connection -//| times out. Providing the number of bytes expected is highly recommended -//| because it will be faster. +//| :return: Data read +//| :rtype: bytes or None""" +//| ... //| -//| :return: Data read -//| :rtype: bytes or None +//| def readinto(self, buf: Any) -> Any: +//| """Read bytes into the ``buf``. Read at most ``len(buf)`` bytes. //| -//| .. method:: readinto(buf) +//| :return: number of bytes read and stored into ``buf`` +//| :rtype: int or None (on a non-blocking error)""" +//| ... //| -//| Read bytes into the ``buf``. Read at most ``len(buf)`` bytes. +//| def readline(self, ) -> Any: +//| """Read a line, ending in a newline character. //| -//| :return: number of bytes read and stored into ``buf`` -//| :rtype: int or None (on a non-blocking error) -//| -//| .. method:: readline() -//| -//| Read a line, ending in a newline character. -//| -//| :return: the line read -//| :rtype: int or None +//| :return: the line read +//| :rtype: int or None""" +//| ... //| // These three methods are used by the shared stream methods. @@ -170,9 +172,8 @@ STATIC mp_uint_t bleio_characteristic_buffer_ioctl(mp_obj_t self_in, mp_uint_t r return ret; } -//| .. attribute:: in_waiting -//| -//| The number of bytes in the input buffer, available to be read +//| in_waiting: Any = ... +//| """The number of bytes in the input buffer, available to be read""" //| STATIC mp_obj_t bleio_characteristic_buffer_obj_get_in_waiting(mp_obj_t self_in) { bleio_characteristic_buffer_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -188,9 +189,9 @@ const mp_obj_property_t bleio_characteristic_buffer_in_waiting_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: reset_input_buffer() -//| -//| Discard any unread characters in the input buffer. +//| def reset_input_buffer(self, ) -> Any: +//| """Discard any unread characters in the input buffer.""" +//| ... //| STATIC mp_obj_t bleio_characteristic_buffer_obj_reset_input_buffer(mp_obj_t self_in) { bleio_characteristic_buffer_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -200,9 +201,9 @@ STATIC mp_obj_t bleio_characteristic_buffer_obj_reset_input_buffer(mp_obj_t self } STATIC MP_DEFINE_CONST_FUN_OBJ_1(bleio_characteristic_buffer_reset_input_buffer_obj, bleio_characteristic_buffer_obj_reset_input_buffer); -//| .. method:: deinit() -//| -//| Disable permanently. +//| def deinit(self, ) -> Any: +//| """Disable permanently.""" +//| ... //| STATIC mp_obj_t bleio_characteristic_buffer_deinit(mp_obj_t self_in) { bleio_characteristic_buffer_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/_bleio/Connection.c b/shared-bindings/_bleio/Connection.c index c157af365..2165f12b8 100644 --- a/shared-bindings/_bleio/Connection.c +++ b/shared-bindings/_bleio/Connection.c @@ -42,28 +42,29 @@ #include "shared-bindings/_bleio/Characteristic.h" #include "shared-bindings/_bleio/Service.h" -//| .. currentmodule:: _bleio +//| class Connection: +//| """.. currentmodule:: _bleio //| -//| :class:`Connection` -- A BLE connection -//| ========================================================= +//| :class:`Connection` -- A BLE connection +//| ========================================================= //| -//| A BLE connection to another device. Used to discover and interact with services on the other -//| device. +//| A BLE connection to another device. Used to discover and interact with services on the other +//| device. //| -//| Usage:: +//| Usage:: //| -//| import _bleio +//| import _bleio //| -//| my_entry = None -//| for entry in _bleio.adapter.scan(2.5): -//| if entry.name is not None and entry.name == 'InterestingPeripheral': -//| my_entry = entry -//| break +//| my_entry = None +//| for entry in _bleio.adapter.scan(2.5): +//| if entry.name is not None and entry.name == 'InterestingPeripheral': +//| my_entry = entry +//| break //| -//| if not my_entry: -//| raise Exception("'InterestingPeripheral' not found") +//| if not my_entry: +//| raise Exception("'InterestingPeripheral' not found") //| -//| connection = _bleio.adapter.connect(my_entry.address, timeout=10) +//| connection = _bleio.adapter.connect(my_entry.address, timeout=10)""" //| void bleio_connection_ensure_connected(bleio_connection_obj_t *self) { @@ -72,15 +73,15 @@ void bleio_connection_ensure_connected(bleio_connection_obj_t *self) { } } -//| .. class:: Connection() +//| def __init__(self, ): +//| """Connections cannot be made directly. Instead, to initiate a connection use `Adapter.connect`. +//| Connections may also be made when another device initiates a connection. To use a Connection +//| created by a peer, read the `Adapter.connections` property. +//| ... //| -//| Connections cannot be made directly. Instead, to initiate a connection use `Adapter.connect`. -//| Connections may also be made when another device initiates a connection. To use a Connection -//| created by a peer, read the `Adapter.connections` property. -//| -//| .. method:: disconnect() -//| -//| Disconnects from the remote peripheral. Does nothing if already disconnected. +//| def disconnect(self, ) -> Any: +//| ""Disconnects from the remote peripheral. Does nothing if already disconnected.""" +//| ... //| STATIC mp_obj_t bleio_connection_disconnect(mp_obj_t self_in) { bleio_connection_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -91,9 +92,9 @@ STATIC mp_obj_t bleio_connection_disconnect(mp_obj_t self_in) { STATIC MP_DEFINE_CONST_FUN_OBJ_1(bleio_connection_disconnect_obj, bleio_connection_disconnect); -//| .. method:: pair(*, bond=True) -//| -//| Pair to the peer to improve security. +//| def pair(self, *, bond: Any = True) -> Any: +//| """Pair to the peer to improve security.""" +//| ... //| STATIC mp_obj_t bleio_connection_pair(mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { bleio_connection_obj_t *self = MP_OBJ_TO_PTR(pos_args[0]); @@ -113,29 +114,29 @@ STATIC mp_obj_t bleio_connection_pair(mp_uint_t n_args, const mp_obj_t *pos_args } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(bleio_connection_pair_obj, 1, bleio_connection_pair); -//| .. method:: discover_remote_services(service_uuids_whitelist=None) -//| -//| Do BLE discovery for all services or for the given service UUIDS, -//| to find their handles and characteristics, and return the discovered services. -//| `Connection.connected` must be True. +//| def discover_remote_services(self, service_uuids_whitelist: iterable = None) -> Any: +//| """Do BLE discovery for all services or for the given service UUIDS, +//| to find their handles and characteristics, and return the discovered services. +//| `Connection.connected` must be True. //| -//| :param iterable service_uuids_whitelist: +//| :param iterable service_uuids_whitelist: //| -//| an iterable of :py:class:~`UUID` objects for the services provided by the peripheral -//| that you want to use. +//| an iterable of :py:class:~`UUID` objects for the services provided by the peripheral +//| that you want to use. //| -//| The peripheral may provide more services, but services not listed are ignored -//| and will not be returned. +//| The peripheral may provide more services, but services not listed are ignored +//| and will not be returned. //| -//| If service_uuids_whitelist is None, then all services will undergo discovery, which can be -//| slow. +//| If service_uuids_whitelist is None, then all services will undergo discovery, which can be +//| slow. //| -//| If the service UUID is 128-bit, or its characteristic UUID's are 128-bit, you -//| you must have already created a :py:class:~`UUID` object for that UUID in order for the -//| service or characteristic to be discovered. Creating the UUID causes the UUID to be -//| registered for use. (This restriction may be lifted in the future.) +//| If the service UUID is 128-bit, or its characteristic UUID's are 128-bit, you +//| you must have already created a :py:class:~`UUID` object for that UUID in order for the +//| service or characteristic to be discovered. Creating the UUID causes the UUID to be +//| registered for use. (This restriction may be lifted in the future.) //| -//| :return: A tuple of `_bleio.Service` objects provided by the remote peripheral. +//| :return: A tuple of `_bleio.Service` objects provided by the remote peripheral.""" +//| ... //| STATIC mp_obj_t bleio_connection_discover_remote_services(mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { bleio_connection_obj_t *self = MP_OBJ_TO_PTR(pos_args[0]); @@ -156,9 +157,8 @@ STATIC mp_obj_t bleio_connection_discover_remote_services(mp_uint_t n_args, cons } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(bleio_connection_discover_remote_services_obj, 1, bleio_connection_discover_remote_services); -//| .. attribute:: connected -//| -//| True if connected to the remote peer. +//| connected: Any = ... +//| """True if connected to the remote peer.""" //| STATIC mp_obj_t bleio_connection_get_connected(mp_obj_t self_in) { bleio_connection_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -175,9 +175,8 @@ const mp_obj_property_t bleio_connection_connected_obj = { }; -//| .. attribute:: paired -//| -//| True if paired to the remote peer. +//| paired: Any = ... +//| """True if paired to the remote peer.""" //| STATIC mp_obj_t bleio_connection_get_paired(mp_obj_t self_in) { bleio_connection_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -194,17 +193,15 @@ const mp_obj_property_t bleio_connection_paired_obj = { }; -//| .. attribute:: connection_interval -//| -//| Time between transmissions in milliseconds. Will be multiple of 1.25ms. Lower numbers +//| connection_interval: Any = ... +//| """Time between transmissions in milliseconds. Will be multiple of 1.25ms. Lower numbers //| increase speed and decrease latency but increase power consumption. //| //| When setting connection_interval, the peer may reject the new interval and //| `connection_interval` will then remain the same. //| //| Apple has additional guidelines that dictate should be a multiple of 15ms except if HID is -//| available. When HID is available Apple devices may accept 11.25ms intervals. -//| +//| available. When HID is available Apple devices may accept 11.25ms intervals.""" //| STATIC mp_obj_t bleio_connection_get_connection_interval(mp_obj_t self_in) { bleio_connection_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/_bleio/Descriptor.c b/shared-bindings/_bleio/Descriptor.c index f7b6b5bbf..00b3bacf5 100644 --- a/shared-bindings/_bleio/Descriptor.c +++ b/shared-bindings/_bleio/Descriptor.c @@ -33,41 +33,42 @@ #include "shared-bindings/_bleio/Descriptor.h" #include "shared-bindings/_bleio/UUID.h" -//| .. currentmodule:: _bleio +//| class Descriptor: +//| """.. currentmodule:: _bleio //| -//| :class:`Descriptor` -- BLE descriptor -//| ========================================================= +//| :class:`Descriptor` -- BLE descriptor +//| ========================================================= //| -//| Stores information about a BLE descriptor. -//| Descriptors are attached to BLE characteristics and provide contextual -//| information about the characteristic. +//| Stores information about a BLE descriptor. +//| Descriptors are attached to BLE characteristics and provide contextual +//| information about the characteristic.""" //| -//| .. class:: Descriptor +//| def __init__(self, ): +//| """There is no regular constructor for a Descriptor. A new local Descriptor can be created +//| and attached to a Characteristic by calling `add_to_characteristic()`. +//| Remote Descriptor objects are created by `Connection.discover_remote_services()` +//| as part of remote Characteristics in the remote Services that are discovered. //| -//| There is no regular constructor for a Descriptor. A new local Descriptor can be created -//| and attached to a Characteristic by calling `add_to_characteristic()`. -//| Remote Descriptor objects are created by `Connection.discover_remote_services()` -//| as part of remote Characteristics in the remote Services that are discovered. +//| .. classmethod:: add_to_characteristic(characteristic, uuid, *, read_perm=`Attribute.OPEN`, write_perm=`Attribute.OPEN`, max_length=20, fixed_length=False, initial_value=b'') //| -//| .. classmethod:: add_to_characteristic(characteristic, uuid, *, read_perm=`Attribute.OPEN`, write_perm=`Attribute.OPEN`, max_length=20, fixed_length=False, initial_value=b'') +//| Create a new Descriptor object, and add it to this Service. //| -//| Create a new Descriptor object, and add it to this Service. +//| :param Characteristic characteristic: The characteristic that will hold this descriptor +//| :param UUID uuid: The uuid of the descriptor +//| :param int read_perm: Specifies whether the descriptor can be read by a client, and if so, which +//| security mode is required. Must be one of the integer values `Attribute.NO_ACCESS`, `Attribute.OPEN`, +//| `Attribute.ENCRYPT_NO_MITM`, `Attribute.ENCRYPT_WITH_MITM`, `Attribute.LESC_ENCRYPT_WITH_MITM`, +//| `Attribute.SIGNED_NO_MITM`, or `Attribute.SIGNED_WITH_MITM`. +//| :param int write_perm: Specifies whether the descriptor can be written by a client, and if so, which +//| security mode is required. Values allowed are the same as ``read_perm``. +//| :param int max_length: Maximum length in bytes of the descriptor value. The maximum allowed is +//| is 512, or possibly 510 if ``fixed_length`` is False. The default, 20, is the maximum +//| number of data bytes that fit in a single BLE 4.x ATT packet. +//| :param bool fixed_length: True if the descriptor value is of fixed length. +//| :param buf initial_value: The initial value for this descriptor. //| -//| :param Characteristic characteristic: The characteristic that will hold this descriptor -//| :param UUID uuid: The uuid of the descriptor -//| :param int read_perm: Specifies whether the descriptor can be read by a client, and if so, which -//| security mode is required. Must be one of the integer values `Attribute.NO_ACCESS`, `Attribute.OPEN`, -//| `Attribute.ENCRYPT_NO_MITM`, `Attribute.ENCRYPT_WITH_MITM`, `Attribute.LESC_ENCRYPT_WITH_MITM`, -//| `Attribute.SIGNED_NO_MITM`, or `Attribute.SIGNED_WITH_MITM`. -//| :param int write_perm: Specifies whether the descriptor can be written by a client, and if so, which -//| security mode is required. Values allowed are the same as ``read_perm``. -//| :param int max_length: Maximum length in bytes of the descriptor value. The maximum allowed is -//| is 512, or possibly 510 if ``fixed_length`` is False. The default, 20, is the maximum -//| number of data bytes that fit in a single BLE 4.x ATT packet. -//| :param bool fixed_length: True if the descriptor value is of fixed length. -//| :param buf initial_value: The initial value for this descriptor. -//| -//| :return: the new Descriptor. +//| :return: the new Descriptor.""" +//| ... //| STATIC mp_obj_t bleio_descriptor_add_to_characteristic(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { // class is arg[0], which we can ignore. @@ -135,9 +136,8 @@ STATIC mp_obj_t bleio_descriptor_add_to_characteristic(size_t n_args, const mp_o STATIC MP_DEFINE_CONST_FUN_OBJ_KW(bleio_descriptor_add_to_characteristic_fun_obj, 3, bleio_descriptor_add_to_characteristic); STATIC MP_DEFINE_CONST_CLASSMETHOD_OBJ(bleio_descriptor_add_to_characteristic_obj, MP_ROM_PTR(&bleio_descriptor_add_to_characteristic_fun_obj)); -//| .. attribute:: uuid -//| -//| The descriptor uuid. (read-only) +//| uuid: Any = ... +//| """The descriptor uuid. (read-only)""" //| STATIC mp_obj_t bleio_descriptor_get_uuid(mp_obj_t self_in) { bleio_descriptor_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -154,9 +154,8 @@ const mp_obj_property_t bleio_descriptor_uuid_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: characteristic (read-only) -//| -//| The Characteristic this Descriptor is a part of. +//| characteristic: Any = ... +//| """The Characteristic this Descriptor is a part of.""" //| STATIC mp_obj_t bleio_descriptor_get_characteristic(mp_obj_t self_in) { bleio_descriptor_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -172,9 +171,8 @@ const mp_obj_property_t bleio_descriptor_characteristic_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: value -//| -//| The value of this descriptor. +//| value: Any = ... +//| """The value of this descriptor.""" //| STATIC mp_obj_t bleio_descriptor_get_value(mp_obj_t self_in) { bleio_descriptor_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/_bleio/PacketBuffer.c b/shared-bindings/_bleio/PacketBuffer.c index 9e3666044..14efa022b 100644 --- a/shared-bindings/_bleio/PacketBuffer.c +++ b/shared-bindings/_bleio/PacketBuffer.c @@ -35,29 +35,30 @@ #include "shared-bindings/_bleio/UUID.h" #include "shared-bindings/util.h" -//| .. currentmodule:: _bleio +//| class PacketBuffer: +//| """.. currentmodule:: _bleio //| -//| :class:`PacketBuffer` -- Packet-oriented characteristic usage. -//| ===================================================================== +//| :class:`PacketBuffer` -- Packet-oriented characteristic usage. +//| ===================================================================== //| -//| Accumulates a Characteristic's incoming packets in a FIFO buffer and facilitates packet aware -//| outgoing writes. A packet's size is either the characteristic length or the maximum transmission -//| unit (MTU), whichever is smaller. The MTU can change so check `packet_size` before creating a -//| buffer to store data. +//| Accumulates a Characteristic's incoming packets in a FIFO buffer and facilitates packet aware +//| outgoing writes. A packet's size is either the characteristic length or the maximum transmission +//| unit (MTU), whichever is smaller. The MTU can change so check `packet_size` before creating a +//| buffer to store data. //| -//| When we're the server, we ignore all connections besides the first to subscribe to -//| notifications. +//| When we're the server, we ignore all connections besides the first to subscribe to +//| notifications.""" //| -//| .. class:: PacketBuffer(characteristic, *, buffer_size) +//| def __init__(self, characteristic: Characteristic, *, buffer_size: int): +//| """Monitor the given Characteristic. Each time a new value is written to the Characteristic +//| add the newly-written bytes to a FIFO buffer. //| -//| Monitor the given Characteristic. Each time a new value is written to the Characteristic -//| add the newly-written bytes to a FIFO buffer. -//| -//| :param Characteristic characteristic: The Characteristic to monitor. -//| It may be a local Characteristic provided by a Peripheral Service, or a remote Characteristic -//| in a remote Service that a Central has connected to. -//| :param int buffer_size: Size of ring buffer (in packets of the Characteristic's maximum -//| length) that stores incoming packets coming from the peer. +//| :param Characteristic characteristic: The Characteristic to monitor. +//| It may be a local Characteristic provided by a Peripheral Service, or a remote Characteristic +//| in a remote Service that a Central has connected to. +//| :param int buffer_size: Size of ring buffer (in packets of the Characteristic's maximum +//| length) that stores incoming packets coming from the peer.""" +//| ... //| STATIC mp_obj_t bleio_packet_buffer_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_characteristic, ARG_buffer_size }; @@ -94,13 +95,13 @@ STATIC void check_for_deinit(bleio_packet_buffer_obj_t *self) { } } -//| .. method:: readinto(buf) -//| -//| Reads a single BLE packet into the ``buf``. Raises an exception if the next packet is longer -//| than the given buffer. Use `packet_size` to read the maximum length of a single packet. +//| def readinto(self, buf: Any) -> Any: +//| """Reads a single BLE packet into the ``buf``. Raises an exception if the next packet is longer +//| than the given buffer. Use `packet_size` to read the maximum length of a single packet. //| -//| :return: number of bytes read and stored into ``buf`` -//| :rtype: int +//| :return: number of bytes read and stored into ``buf`` +//| :rtype: int""" +//| ... //| STATIC mp_obj_t bleio_packet_buffer_readinto(mp_obj_t self_in, mp_obj_t buffer_obj) { bleio_packet_buffer_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -118,12 +119,12 @@ STATIC mp_obj_t bleio_packet_buffer_readinto(mp_obj_t self_in, mp_obj_t buffer_o } STATIC MP_DEFINE_CONST_FUN_OBJ_2(bleio_packet_buffer_readinto_obj, bleio_packet_buffer_readinto); -//| .. method:: write(data, *, header=None) -//| -//| Writes all bytes from data into the same outgoing packet. The bytes from header are included -//| before data when the pending packet is currently empty. +//| def write(self, data: Any, *, header: Any = None) -> Any: +//| """Writes all bytes from data into the same outgoing packet. The bytes from header are included +//| before data when the pending packet is currently empty. //| -//| This does not block until the data is sent. It only blocks until the data is pending. +//| This does not block until the data is sent. It only blocks until the data is pending.""" +//| ... //| // TODO: Add a kwarg `merge=False` to dictate whether subsequent writes are merged into a pending // one. @@ -155,10 +156,9 @@ STATIC mp_obj_t bleio_packet_buffer_write(mp_uint_t n_args, const mp_obj_t *pos_ } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(bleio_packet_buffer_write_obj, 1, bleio_packet_buffer_write); -//| .. method:: deinit() -//| -//| Disable permanently. -//| +//| def deinit(self, ) -> Any: +//| """Disable permanently.""" +//| ... STATIC mp_obj_t bleio_packet_buffer_deinit(mp_obj_t self_in) { bleio_packet_buffer_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_bleio_packet_buffer_deinit(self); @@ -166,10 +166,9 @@ STATIC mp_obj_t bleio_packet_buffer_deinit(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(bleio_packet_buffer_deinit_obj, bleio_packet_buffer_deinit); -//| .. attribute:: packet_size -//| -//| Maximum size of each packet in bytes. This is the minimum of the Characteristic length and -//| the negotiated Maximum Transfer Unit (MTU). +//| packet_size: Any = ... +//| """Maximum size of each packet in bytes. This is the minimum of the Characteristic length and +//| the negotiated Maximum Transfer Unit (MTU).""" //| STATIC mp_obj_t bleio_packet_buffer_get_packet_size(mp_obj_t self_in) { bleio_packet_buffer_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/_bleio/ScanEntry.c b/shared-bindings/_bleio/ScanEntry.c index d03cd6fb5..a92b247be 100644 --- a/shared-bindings/_bleio/ScanEntry.c +++ b/shared-bindings/_bleio/ScanEntry.c @@ -35,25 +35,26 @@ #include "shared-bindings/_bleio/UUID.h" #include "shared-module/_bleio/ScanEntry.h" -//| .. currentmodule:: _bleio +//| class ScanEntry: +//| """.. currentmodule:: _bleio //| -//| :class:`ScanEntry` -- BLE scan data -//| ========================================================= +//| :class:`ScanEntry` -- BLE scan data +//| ========================================================= //| -//| Encapsulates information about a device that was received during scanning. It can be -//| advertisement or scan response data. This object may only be created by a `_bleio.ScanResults`: -//| it has no user-visible constructor. +//| Encapsulates information about a device that was received during scanning. It can be +//| advertisement or scan response data. This object may only be created by a `_bleio.ScanResults`: +//| it has no user-visible constructor.""" //| -//| .. class:: ScanEntry() +//| def __init__(self, ): +//| """Cannot be instantiated directly. Use `_bleio.Adapter.start_scan`.""" +//| ... //| -//| Cannot be instantiated directly. Use `_bleio.Adapter.start_scan`. -//| -//| .. method:: matches(prefixes, *, all=True) -//| -//| Returns True if the ScanEntry matches all prefixes when ``all`` is True. This is stricter -//| than the scan filtering which accepts any advertisements that match any of the prefixes -//| where all is False. +//| def matches(self, prefixes: Any, *, all: Any = True) -> Any: +//| """Returns True if the ScanEntry matches all prefixes when ``all`` is True. This is stricter +//| than the scan filtering which accepts any advertisements that match any of the prefixes +//| where all is False.""" +//| ... //| STATIC mp_obj_t bleio_scanentry_matches(mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { bleio_scanentry_obj_t *self = MP_OBJ_TO_PTR(pos_args[0]); @@ -74,9 +75,8 @@ STATIC mp_obj_t bleio_scanentry_matches(mp_uint_t n_args, const mp_obj_t *pos_ar } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(bleio_scanentry_matches_obj, 2, bleio_scanentry_matches); -//| .. attribute:: address -//| -//| The address of the device (read-only), of type `_bleio.Address`. +//| address: Any = ... +//| """The address of the device (read-only), of type `_bleio.Address`.""" //| STATIC mp_obj_t bleio_scanentry_get_address(mp_obj_t self_in) { bleio_scanentry_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -91,9 +91,8 @@ const mp_obj_property_t bleio_scanentry_address_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: advertisement_bytes -//| -//| All the advertisement data present in the packet, returned as a ``bytes`` object. (read-only) +//| advertisement_bytes: Any = ... +//| """All the advertisement data present in the packet, returned as a ``bytes`` object. (read-only)""" //| STATIC mp_obj_t scanentry_get_advertisement_bytes(mp_obj_t self_in) { bleio_scanentry_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -108,9 +107,8 @@ const mp_obj_property_t bleio_scanentry_advertisement_bytes_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: rssi -//| -//| The signal strength of the device at the time of the scan, in integer dBm. (read-only) +//| rssi: Any = ... +//| """The signal strength of the device at the time of the scan, in integer dBm. (read-only)""" //| STATIC mp_obj_t scanentry_get_rssi(mp_obj_t self_in) { bleio_scanentry_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -125,9 +123,8 @@ const mp_obj_property_t bleio_scanentry_rssi_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: connectable -//| -//| True if the device can be connected to. (read-only) +//| connectable: Any = ... +//| """True if the device can be connected to. (read-only)""" //| STATIC mp_obj_t scanentry_get_connectable(mp_obj_t self_in) { bleio_scanentry_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -142,9 +139,8 @@ const mp_obj_property_t bleio_scanentry_connectable_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: scan_response -//| -//| True if the entry was a scan response. (read-only) +//| scan_response: Any = ... +//| """True if the entry was a scan response. (read-only)""" //| STATIC mp_obj_t scanentry_get_scan_response(mp_obj_t self_in) { bleio_scanentry_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/_bleio/ScanResults.c b/shared-bindings/_bleio/ScanResults.c index dcece3d5d..4b274fc68 100644 --- a/shared-bindings/_bleio/ScanResults.c +++ b/shared-bindings/_bleio/ScanResults.c @@ -32,13 +32,14 @@ #include "py/runtime.h" #include "shared-bindings/_bleio/ScanResults.h" -//| .. currentmodule:: _bleio +//| class ScanResults: +//| """.. currentmodule:: _bleio //| -//| :class:`ScanResults` -- An Iterator over BLE scanning results -//| =============================================================== +//| :class:`ScanResults` -- An Iterator over BLE scanning results +//| =============================================================== //| -//| Iterates over advertising data received while scanning. This object is always created -//| by a `_bleio.Adapter`: it has no user-visible constructor. +//| Iterates over advertising data received while scanning. This object is always created +//| by a `_bleio.Adapter`: it has no user-visible constructor.""" //| STATIC mp_obj_t scanresults_iternext(mp_obj_t self_in) { mp_check_self(MP_OBJ_IS_TYPE(self_in, &bleio_scanresults_type)); @@ -50,18 +51,18 @@ STATIC mp_obj_t scanresults_iternext(mp_obj_t self_in) { return MP_OBJ_STOP_ITERATION; } -//| .. class:: ScanResults() +//| def __init__(self, ): +//| """Cannot be instantiated directly. Use `_bleio.Adapter.start_scan`.""" +//| ... //| -//| Cannot be instantiated directly. Use `_bleio.Adapter.start_scan`. +//| def __iter__(self, ) -> Any: +//| """Returns itself since it is the iterator.""" +//| ... //| -//| .. method:: __iter__() -//| -//| Returns itself since it is the iterator. -//| -//| .. method:: __next__() -//| -//| Returns the next `_bleio.ScanEntry`. Blocks if none have been received and scanning is still -//| active. Raises `StopIteration` if scanning is finished and no other results are available. +//| def __next__(self, ) -> Any: +//| """Returns the next `_bleio.ScanEntry`. Blocks if none have been received and scanning is still +//| active. Raises `StopIteration` if scanning is finished and no other results are available.""" +//| ... //| const mp_obj_type_t bleio_scanresults_type = { diff --git a/shared-bindings/_bleio/Service.c b/shared-bindings/_bleio/Service.c index bc242bc36..3526ce189 100644 --- a/shared-bindings/_bleio/Service.c +++ b/shared-bindings/_bleio/Service.c @@ -32,25 +32,26 @@ #include "shared-bindings/_bleio/Service.h" #include "shared-bindings/_bleio/UUID.h" -//| .. currentmodule:: _bleio +//| class Service: +//| """.. currentmodule:: _bleio //| -//| :class:`Service` -- BLE GATT Service -//| ========================================================= +//| :class:`Service` -- BLE GATT Service +//| ========================================================= //| -//| Stores information about a BLE service and its characteristics. +//| Stores information about a BLE service and its characteristics.""" //| -//| .. class:: Service(uuid, *, secondary=False) +//| def __init__(self, uuid: UUID, *, secondary: bool = False): +//| """Create a new Service identified by the specified UUID. It can be accessed by all +//| connections. This is known as a Service server. Client Service objects are created via +//| `Connection.discover_remote_services`. //| -//| Create a new Service identified by the specified UUID. It can be accessed by all -//| connections. This is known as a Service server. Client Service objects are created via -//| `Connection.discover_remote_services`. +//| To mark the Service as secondary, pass `True` as :py:data:`secondary`. //| -//| To mark the Service as secondary, pass `True` as :py:data:`secondary`. +//| :param UUID uuid: The uuid of the service +//| :param bool secondary: If the service is a secondary one //| -//| :param UUID uuid: The uuid of the service -//| :param bool secondary: If the service is a secondary one -// -//| :return: the new Service +//| :return: the new Service""" +//| ... //| STATIC mp_obj_t bleio_service_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_uuid, ARG_secondary }; @@ -77,10 +78,9 @@ STATIC mp_obj_t bleio_service_make_new(const mp_obj_type_t *type, size_t n_args, return MP_OBJ_FROM_PTR(service); } -//| .. attribute:: characteristics -//| -//| A tuple of :py:class:`Characteristic` designating the characteristics that are offered by -//| this service. (read-only) +//| characteristics: Any = ... +//| """A tuple of :py:class:`Characteristic` designating the characteristics that are offered by +//| this service. (read-only)""" //| STATIC mp_obj_t bleio_service_get_characteristics(mp_obj_t self_in) { bleio_service_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -97,9 +97,8 @@ const mp_obj_property_t bleio_service_characteristics_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: remote -//| -//| True if this is a service provided by a remote device. (read-only) +//| remote: Any = ... +//| """True if this is a service provided by a remote device. (read-only)""" //| STATIC mp_obj_t bleio_service_get_remote(mp_obj_t self_in) { bleio_service_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -115,9 +114,8 @@ const mp_obj_property_t bleio_service_remote_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: secondary -//| -//| True if this is a secondary service. (read-only) +//| secondary: Any = ... +//| """True if this is a secondary service. (read-only)""" //| STATIC mp_obj_t bleio_service_get_secondary(mp_obj_t self_in) { bleio_service_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -133,11 +131,10 @@ const mp_obj_property_t bleio_service_secondary_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: uuid -//| -//| The UUID of this service. (read-only) +//| uuid: Any = ... +//| """The UUID of this service. (read-only) //| -//| Will be ``None`` if the 128-bit UUID for this service is not known. +//| Will be ``None`` if the 128-bit UUID for this service is not known.""" //| STATIC mp_obj_t bleio_service_get_uuid(mp_obj_t self_in) { bleio_service_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/_bleio/UUID.c b/shared-bindings/_bleio/UUID.c index dd3415902..d4b0f84ca 100644 --- a/shared-bindings/_bleio/UUID.c +++ b/shared-bindings/_bleio/UUID.c @@ -33,28 +33,28 @@ #include "py/runtime.h" #include "shared-bindings/_bleio/UUID.h" -//| .. currentmodule:: _bleio +//| class UUID: +//| """.. currentmodule:: _bleio //| -//| :class:`UUID` -- BLE UUID -//| ========================================================= +//| :class:`UUID` -- BLE UUID +//| ========================================================= //| -//| A 16-bit or 128-bit UUID. Can be used for services, characteristics, descriptors and more. +//| A 16-bit or 128-bit UUID. Can be used for services, characteristics, descriptors and more.""" //| - -//| .. class:: UUID(value) -//| -//| Create a new UUID or UUID object encapsulating the uuid value. -//| The value can be one of: +//| def __init__(self, value: Any): +//| """Create a new UUID or UUID object encapsulating the uuid value. +//| The value can be one of: //| -//| - an `int` value in range 0 to 0xFFFF (Bluetooth SIG 16-bit UUID) -//| - a buffer object (bytearray, bytes) of 16 bytes in little-endian order (128-bit UUID) -//| - a string of hex digits of the form 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx' +//| - an `int` value in range 0 to 0xFFFF (Bluetooth SIG 16-bit UUID) +//| - a buffer object (bytearray, bytes) of 16 bytes in little-endian order (128-bit UUID) +//| - a string of hex digits of the form 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx' //| -//| Creating a 128-bit UUID registers the UUID with the onboard BLE software, and provides a -//| temporary 16-bit UUID that can be used in place of the full 128-bit UUID. +//| Creating a 128-bit UUID registers the UUID with the onboard BLE software, and provides a +//| temporary 16-bit UUID that can be used in place of the full 128-bit UUID. //| -//| :param value: The uuid value to encapsulate -//| :type value: int or typing.ByteString +//| :param value: The uuid value to encapsulate +//| :type value: int or typing.ByteString""" +//| ... //| STATIC mp_obj_t bleio_uuid_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 1, 1, false); @@ -125,11 +125,10 @@ STATIC mp_obj_t bleio_uuid_make_new(const mp_obj_type_t *type, size_t n_args, co return MP_OBJ_FROM_PTR(self); } -//| .. attribute:: uuid16 -//| -//| The 16-bit part of the UUID. (read-only) +//| uuid16: Any = ... +//| """The 16-bit part of the UUID. (read-only) //| -//| :type: int +//| :type: int""" //| STATIC mp_obj_t bleio_uuid_get_uuid16(mp_obj_t self_in) { bleio_uuid_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -145,12 +144,11 @@ const mp_obj_property_t bleio_uuid_uuid16_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: uuid128 -//| -//| The 128-bit value of the UUID +//| uuid128: Any = ... +//| """The 128-bit value of the UUID //| Raises AttributeError if this is a 16-bit UUID. (read-only) //| -//| :type: bytes +//| :type: bytes""" //| STATIC mp_obj_t bleio_uuid_get_uuid128(mp_obj_t self_in) { bleio_uuid_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -172,12 +170,11 @@ const mp_obj_property_t bleio_uuid_uuid128_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: size -//| -//| 128 if this UUID represents a 128-bit vendor-specific UUID. 16 if this UUID represents a +//| size: Any = ... +//| """128 if this UUID represents a 128-bit vendor-specific UUID. 16 if this UUID represents a //| 16-bit Bluetooth SIG assigned UUID. (read-only) 32-bit UUIDs are not currently supported. //| -//| :type: int +//| :type: int""" //| STATIC mp_obj_t bleio_uuid_get_size(mp_obj_t self_in) { bleio_uuid_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -194,9 +191,9 @@ const mp_obj_property_t bleio_uuid_size_obj = { }; -//| .. method:: pack_into(buffer, offset=0) -//| -//| Packs the UUID into the given buffer at the given offset. +//| def pack_into(self, buffer: Any, offset: Any = 0) -> Any: +//| """Packs the UUID into the given buffer at the given offset.""" +//| ... //| STATIC mp_obj_t bleio_uuid_pack_into(mp_uint_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { bleio_uuid_obj_t *self = MP_OBJ_TO_PTR(pos_args[0]); @@ -256,11 +253,9 @@ STATIC mp_obj_t bleio_uuid_unary_op(mp_unary_op_t op, mp_obj_t self_in) { } } -//| - -//| .. method:: __eq__(other) -//| -//| Two UUID objects are equal if their values match and they are both 128-bit or both 16-bit. +//| def __eq__(self, other: Any) -> Any: +//| """Two UUID objects are equal if their values match and they are both 128-bit or both 16-bit.""" +//| ... //| STATIC mp_obj_t bleio_uuid_binary_op(mp_binary_op_t op, mp_obj_t lhs_in, mp_obj_t rhs_in) { switch (op) { diff --git a/shared-bindings/_bleio/__init__.c b/shared-bindings/_bleio/__init__.c index dd401398c..da7bfdd81 100644 --- a/shared-bindings/_bleio/__init__.c +++ b/shared-bindings/_bleio/__init__.c @@ -41,7 +41,7 @@ #include "shared-bindings/_bleio/Service.h" #include "shared-bindings/_bleio/UUID.h" -//| :mod:`_bleio` --- Bluetooth Low Energy (BLE) communication +//| """:mod:`_bleio` --- Bluetooth Low Energy (BLE) communication //| ================================================================ //| //| .. module:: _bleio @@ -79,13 +79,14 @@ //| .. attribute:: adapter //| //| BLE Adapter used to manage device discovery and connections. -//| This object is the sole instance of `_bleio.Adapter`. +//| This object is the sole instance of `_bleio.Adapter`.""" //| -//| .. class:: BluetoothError(Exception) -//| -//| Catch all exception for Bluetooth related errors. -//| + +//| class BluetoothError: +//| def __init__(self, Exception: Any): +//| """Catch all exception for Bluetooth related errors.""" +//| ... MP_DEFINE_BLEIO_EXCEPTION(BluetoothError, Exception) NORETURN void mp_raise_bleio_BluetoothError(const compressed_string_t* fmt, ...) { @@ -95,10 +96,10 @@ NORETURN void mp_raise_bleio_BluetoothError(const compressed_string_t* fmt, ...) va_end(argptr); nlr_raise(exception); } - -//| .. class:: ConnectionError(BluetoothError) -//| -//| Raised when a connection is unavailable. +//| class ConnectionError: +//| def __init__(self, BluetoothError: Any): +//| """Raised when a connection is unavailable.""" +//| ... //| MP_DEFINE_BLEIO_EXCEPTION(ConnectionError, bleio_BluetoothError) NORETURN void mp_raise_bleio_ConnectionError(const compressed_string_t* fmt, ...) { @@ -109,19 +110,20 @@ NORETURN void mp_raise_bleio_ConnectionError(const compressed_string_t* fmt, ... nlr_raise(exception); } -//| .. class:: RoleError(BluetoothError) -//| -//| Raised when a resource is used as the mismatched role. For example, if a local CCCD is -//| attempted to be set but they can only be set when remote. +//| class RoleError: +//| def __init__(self, BluetoothError: Any): +//| """Raised when a resource is used as the mismatched role. For example, if a local CCCD is +//| attempted to be set but they can only be set when remote.""" +//| ... //| MP_DEFINE_BLEIO_EXCEPTION(RoleError, bleio_BluetoothError) NORETURN void mp_raise_bleio_RoleError(const compressed_string_t* msg) { mp_raise_msg(&mp_type_bleio_RoleError, msg); } - -//| .. class:: SecurityError(BluetoothError) -//| -//| Raised when a security related error occurs. +//| class SecurityError: +//| def __init__(self, BluetoothError: Any): +//| """Raised when a security related error occurs.""" +//| ... //| MP_DEFINE_BLEIO_EXCEPTION(SecurityError, bleio_BluetoothError) NORETURN void mp_raise_bleio_SecurityError(const compressed_string_t* fmt, ...) { diff --git a/shared-bindings/audiopwmio/PWMAudioOut.c b/shared-bindings/audiopwmio/PWMAudioOut.c index 9fa2b1578..17f82e3f6 100644 --- a/shared-bindings/audiopwmio/PWMAudioOut.c +++ b/shared-bindings/audiopwmio/PWMAudioOut.c @@ -36,66 +36,67 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: audiopwmio -//| -//| :class:`PWMAudioOut` -- Output an analog audio signal -//| ======================================================== -//| -//| AudioOut can be used to output an analog audio signal on a given pin. -//| -//| .. class:: PWMAudioOut(left_channel, *, right_channel=None, quiescent_value=0x8000) -//| -//| Create a PWMAudioOut object associated with the given pin(s). This allows you to -//| play audio signals out on the given pin(s). In contrast to mod:`audioio`, -//| the pin(s) specified are digital pins, and are driven with a device-dependent PWM -//| signal. -//| -//| :param ~microcontroller.Pin left_channel: The pin to output the left channel to -//| :param ~microcontroller.Pin right_channel: The pin to output the right channel to -//| :param int quiescent_value: The output value when no signal is present. Samples should start -//| and end with this value to prevent audible popping. -//| -//| Simple 8ksps 440 Hz sin wave:: -//| -//| import audiocore -//| import audiopwmio -//| import board -//| import array -//| import time -//| import math -//| -//| # Generate one period of sine wav. -//| length = 8000 // 440 -//| sine_wave = array.array("H", [0] * length) -//| for i in range(length): -//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) -//| -//| dac = audiopwmio.PWMAudioOut(board.SPEAKER) -//| sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) -//| dac.play(sine_wave, loop=True) -//| time.sleep(1) -//| dac.stop() -//| -//| Playing a wave file from flash:: -//| -//| import board -//| import audiocore -//| import audiopwmio -//| import digitalio -//| -//| # Required for CircuitPlayground Express -//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) -//| speaker_enable.switch_to_output(value=True) -//| -//| data = open("cplay-5.1-16bit-16khz.wav", "rb") -//| wav = audiocore.WaveFile(data) -//| a = audiopwmio.PWMAudioOut(board.SPEAKER) -//| -//| print("playing") -//| a.play(wav) -//| while a.playing: -//| pass -//| print("stopped") +//| class PWMAudioOut: +//| """.. currentmodule:: audiopwmio +//| +//| :class:`PWMAudioOut` -- Output an analog audio signal +//| ======================================================== +//| +//| AudioOut can be used to output an analog audio signal on a given pin.""" +//| +//| def __init__(self, left_channel: microcontroller.Pin, *, right_channel: microcontroller.Pin = None, quiescent_value: int = 0x8000): +//| """Create a PWMAudioOut object associated with the given pin(s). This allows you to +//| play audio signals out on the given pin(s). In contrast to mod:`audioio`, +//| the pin(s) specified are digital pins, and are driven with a device-dependent PWM +//| signal. +//| +//| :param ~microcontroller.Pin left_channel: The pin to output the left channel to +//| :param ~microcontroller.Pin right_channel: The pin to output the right channel to +//| :param int quiescent_value: The output value when no signal is present. Samples should start +//| and end with this value to prevent audible popping. +//| +//| Simple 8ksps 440 Hz sin wave:: +//| +//| import audiocore +//| import audiopwmio +//| import board +//| import array +//| import time +//| import math +//| +//| # Generate one period of sine wav. +//| length = 8000 // 440 +//| sine_wave = array.array("H", [0] * length) +//| for i in range(length): +//| sine_wave[i] = int(math.sin(math.pi * 2 * i / 18) * (2 ** 15) + 2 ** 15) +//| +//| dac = audiopwmio.PWMAudioOut(board.SPEAKER) +//| sine_wave = audiocore.RawSample(sine_wave, sample_rate=8000) +//| dac.play(sine_wave, loop=True) +//| time.sleep(1) +//| dac.stop() +//| +//| Playing a wave file from flash:: +//| +//| import board +//| import audiocore +//| import audiopwmio +//| import digitalio +//| +//| # Required for CircuitPlayground Express +//| speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) +//| speaker_enable.switch_to_output(value=True) +//| +//| data = open("cplay-5.1-16bit-16khz.wav", "rb") +//| wav = audiocore.WaveFile(data) +//| a = audiopwmio.PWMAudioOut(board.SPEAKER) +//| +//| print("playing") +//| a.play(wav) +//| while a.playing: +//| pass +//| print("stopped")""" +//| ... //| STATIC mp_obj_t audiopwmio_pwmaudioout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_left_channel, ARG_right_channel, ARG_quiescent_value }; @@ -118,9 +119,9 @@ STATIC mp_obj_t audiopwmio_pwmaudioout_make_new(const mp_obj_type_t *type, size_ return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the PWMAudioOut and releases any hardware resources for reuse. +//| def deinit(self, ) -> Any: +//| """Deinitialises the PWMAudioOut and releases any hardware resources for reuse.""" +//| ... //| STATIC mp_obj_t audiopwmio_pwmaudioout_deinit(mp_obj_t self_in) { audiopwmio_pwmaudioout_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -134,17 +135,16 @@ STATIC void check_for_deinit(audiopwmio_pwmaudioout_obj_t *self) { raise_deinited_error(); } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. -//| +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... STATIC mp_obj_t audiopwmio_pwmaudioout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_audiopwmio_pwmaudioout_deinit(args[0]); @@ -153,16 +153,16 @@ STATIC mp_obj_t audiopwmio_pwmaudioout_obj___exit__(size_t n_args, const mp_obj_ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiopwmio_pwmaudioout___exit___obj, 4, 4, audiopwmio_pwmaudioout_obj___exit__); -//| .. method:: play(sample, *, loop=False) +//| def play(self, sample: Any, *, loop: Any = False) -> Any: +//| """Plays the sample once when loop=False and continuously when loop=True. +//| Does not block. Use `playing` to block. //| -//| Plays the sample once when loop=False and continuously when loop=True. -//| Does not block. Use `playing` to block. +//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. //| -//| Sample must be an `audiocore.WaveFile`, `audiocore.RawSample`, or `audiomixer.Mixer`. -//| -//| The sample itself should consist of 16 bit samples. Microcontrollers with a lower output -//| resolution will use the highest order bits to output. For example, the SAMD21 has a 10 bit -//| DAC that ignores the lowest 6 bits when playing 16 bit samples. +//| The sample itself should consist of 16 bit samples. Microcontrollers with a lower output +//| resolution will use the highest order bits to output. For example, the SAMD21 has a 10 bit +//| DAC that ignores the lowest 6 bits when playing 16 bit samples.""" +//| ... //| STATIC mp_obj_t audiopwmio_pwmaudioout_obj_play(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_sample, ARG_loop }; @@ -182,9 +182,9 @@ STATIC mp_obj_t audiopwmio_pwmaudioout_obj_play(size_t n_args, const mp_obj_t *p } MP_DEFINE_CONST_FUN_OBJ_KW(audiopwmio_pwmaudioout_play_obj, 1, audiopwmio_pwmaudioout_obj_play); -//| .. method:: stop() -//| -//| Stops playback and resets to the start of the sample. +//| def stop(self, ) -> Any: +//| """Stops playback and resets to the start of the sample.""" +//| ... //| STATIC mp_obj_t audiopwmio_pwmaudioout_obj_stop(mp_obj_t self_in) { audiopwmio_pwmaudioout_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -194,9 +194,8 @@ STATIC mp_obj_t audiopwmio_pwmaudioout_obj_stop(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiopwmio_pwmaudioout_stop_obj, audiopwmio_pwmaudioout_obj_stop); -//| .. attribute:: playing -//| -//| True when an audio sample is being output even if `paused`. (read-only) +//| playing: Any = ... +//| """True when an audio sample is being output even if `paused`. (read-only)""" //| STATIC mp_obj_t audiopwmio_pwmaudioout_obj_get_playing(mp_obj_t self_in) { audiopwmio_pwmaudioout_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -212,9 +211,9 @@ const mp_obj_property_t audiopwmio_pwmaudioout_playing_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: pause() -//| -//| Stops playback temporarily while remembering the position. Use `resume` to resume playback. +//| def pause(self, ) -> Any: +//| """Stops playback temporarily while remembering the position. Use `resume` to resume playback.""" +//| ... //| STATIC mp_obj_t audiopwmio_pwmaudioout_obj_pause(mp_obj_t self_in) { audiopwmio_pwmaudioout_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -228,9 +227,9 @@ STATIC mp_obj_t audiopwmio_pwmaudioout_obj_pause(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiopwmio_pwmaudioout_pause_obj, audiopwmio_pwmaudioout_obj_pause); -//| .. method:: resume() -//| -//| Resumes sample playback after :py:func:`pause`. +//| def resume(self, ) -> Any: +//| """Resumes sample playback after :py:func:`pause`.""" +//| ... //| STATIC mp_obj_t audiopwmio_pwmaudioout_obj_resume(mp_obj_t self_in) { audiopwmio_pwmaudioout_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -244,9 +243,8 @@ STATIC mp_obj_t audiopwmio_pwmaudioout_obj_resume(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(audiopwmio_pwmaudioout_resume_obj, audiopwmio_pwmaudioout_obj_resume); -//| .. attribute:: paused -//| -//| True when playback is paused. (read-only) +//| paused: Any = ... +//| """True when playback is paused. (read-only)""" //| STATIC mp_obj_t audiopwmio_pwmaudioout_obj_get_paused(mp_obj_t self_in) { audiopwmio_pwmaudioout_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/audiopwmio/__init__.c b/shared-bindings/audiopwmio/__init__.c index 8a2b202b3..74d22b45e 100644 --- a/shared-bindings/audiopwmio/__init__.c +++ b/shared-bindings/audiopwmio/__init__.c @@ -33,7 +33,7 @@ #include "shared-bindings/audiopwmio/__init__.h" #include "shared-bindings/audiopwmio/PWMAudioOut.h" -//| :mod:`audiopwmio` --- Support for audio input and output +//| """:mod:`audiopwmio` --- Support for audio input and output //| ======================================================== //| //| .. module:: audiopwmio @@ -55,7 +55,7 @@ //| :ref:`lifetime-and-contextmanagers` for more info. //| //| Since CircuitPython 5, `Mixer`, `RawSample` and `WaveFile` are moved -//| to :mod:`audiocore`. +//| to :mod:`audiocore`.""" //| STATIC const mp_rom_map_elem_t audiopwmio_module_globals_table[] = { diff --git a/shared-bindings/bitbangio/I2C.c b/shared-bindings/bitbangio/I2C.c index 3c4f13777..a682e050e 100644 --- a/shared-bindings/bitbangio/I2C.c +++ b/shared-bindings/bitbangio/I2C.c @@ -37,21 +37,22 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: bitbangio +//| class I2C: +//| """.. currentmodule:: bitbangio //| -//| :class:`I2C` --- Two wire serial protocol -//| ------------------------------------------ +//| :class:`I2C` --- Two wire serial protocol +//| ------------------------------------------""" //| -//| .. class:: I2C(scl, sda, *, frequency=400000, timeout) +//| def __init__(self, scl: microcontroller.Pin, sda: microcontroller.Pin, *, frequency: int = 400000, timeout: int): +//| """I2C is a two-wire protocol for communicating between devices. At the +//| physical level it consists of 2 wires: SCL and SDA, the clock and data +//| lines respectively. //| -//| I2C is a two-wire protocol for communicating between devices. At the -//| physical level it consists of 2 wires: SCL and SDA, the clock and data -//| lines respectively. -//| -//| :param ~microcontroller.Pin scl: The clock pin -//| :param ~microcontroller.Pin sda: The data pin -//| :param int frequency: The clock frequency of the bus -//| :param int timeout: The maximum clock stretching timeout in microseconds +//| :param ~microcontroller.Pin scl: The clock pin +//| :param ~microcontroller.Pin sda: The data pin +//| :param int frequency: The clock frequency of the bus +//| :param int timeout: The maximum clock stretching timeout in microseconds""" +//| ... //| STATIC mp_obj_t bitbangio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_scl, ARG_sda, ARG_frequency, ARG_timeout }; @@ -73,9 +74,9 @@ STATIC mp_obj_t bitbangio_i2c_make_new(const mp_obj_type_t *type, size_t n_args, return (mp_obj_t)self; } -//| .. method:: deinit() -//| -//| Releases control of the underlying hardware so other classes can use it. +//| def deinit(self, ) -> Any: +//| """Releases control of the underlying hardware so other classes can use it.""" +//| ... //| STATIC mp_obj_t bitbangio_i2c_obj_deinit(mp_obj_t self_in) { bitbangio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -90,16 +91,16 @@ STATIC void check_for_deinit(bitbangio_i2c_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used in Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used in Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware on context exit. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware on context exit. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t bitbangio_i2c_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -114,11 +115,11 @@ static void check_lock(bitbangio_i2c_obj_t *self) { } } -//| .. method:: scan() -//| -//| Scan all I2C addresses between 0x08 and 0x77 inclusive and return a list of -//| those that respond. A device responds if it pulls the SDA line low after -//| its address (including a read bit) is sent on the bus. +//| def scan(self, ) -> Any: +//| """Scan all I2C addresses between 0x08 and 0x77 inclusive and return a list of +//| those that respond. A device responds if it pulls the SDA line low after +//| its address (including a read bit) is sent on the bus.""" +//| ... //| STATIC mp_obj_t bitbangio_i2c_scan(mp_obj_t self_in) { bitbangio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -136,9 +137,9 @@ STATIC mp_obj_t bitbangio_i2c_scan(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(bitbangio_i2c_scan_obj, bitbangio_i2c_scan); -//| .. method:: try_lock() -//| -//| Attempts to grab the I2C lock. Returns True on success. +//| def try_lock(self, ) -> Any: +//| """Attempts to grab the I2C lock. Returns True on success.""" +//| ... //| STATIC mp_obj_t bitbangio_i2c_obj_try_lock(mp_obj_t self_in) { bitbangio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -147,9 +148,9 @@ STATIC mp_obj_t bitbangio_i2c_obj_try_lock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(bitbangio_i2c_try_lock_obj, bitbangio_i2c_obj_try_lock); -//| .. method:: unlock() -//| -//| Releases the I2C lock. +//| def unlock(self, ) -> Any: +//| """Releases the I2C lock.""" +//| ... //| STATIC mp_obj_t bitbangio_i2c_obj_unlock(mp_obj_t self_in) { bitbangio_i2c_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -159,20 +160,20 @@ STATIC mp_obj_t bitbangio_i2c_obj_unlock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(bitbangio_i2c_unlock_obj, bitbangio_i2c_obj_unlock); -//| .. method:: readfrom_into(address, buffer, *, start=0, end=None) -//| -//| Read into ``buffer`` from the slave specified by ``address``. -//| The number of bytes read will be the length of ``buffer``. -//| At least one byte must be read. +//| def readfrom_into(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None) -> Any: +//| """Read into ``buffer`` from the slave specified by ``address``. +//| The number of bytes read will be the length of ``buffer``. +//| At least one byte must be read. //| -//| If ``start`` or ``end`` is provided, then the buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like -//| ``buf[start:end]`` will so it saves memory. +//| If ``start`` or ``end`` is provided, then the buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like +//| ``buf[start:end]`` will so it saves memory. //| -//| :param int address: 7-bit device address -//| :param bytearray buffer: buffer to write into -//| :param int start: Index to start writing at -//| :param int end: Index to write up to but not include +//| :param int address: 7-bit device address +//| :param bytearray buffer: buffer to write into +//| :param int start: Index to start writing at +//| :param int end: Index to write up to but not include""" +//| ... //| // Shared arg parsing for readfrom_into and writeto_then_readfrom. STATIC void readfrom(bitbangio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end) { @@ -211,25 +212,25 @@ STATIC mp_obj_t bitbangio_i2c_readfrom_into(size_t n_args, const mp_obj_t *pos_a } MP_DEFINE_CONST_FUN_OBJ_KW(bitbangio_i2c_readfrom_into_obj, 3, bitbangio_i2c_readfrom_into); -//| .. method:: writeto(address, buffer, *, start=0, end=None, stop=True) +//| def writeto(self, address: int, buffer: bytearray, *, start: int = 0, end: int = None, stop: bool = True) -> Any: +//| """Write the bytes from ``buffer`` to the slave specified by ``address`` and then transmits a +//| stop bit. Use `writeto_then_readfrom` when needing a write, no stop and repeated start +//| before a read. //| -//| Write the bytes from ``buffer`` to the slave specified by ``address`` and then transmits a -//| stop bit. Use `writeto_then_readfrom` when needing a write, no stop and repeated start -//| before a read. +//| If ``start`` or ``end`` is provided, then the buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like +//| ``buffer[start:end]`` will so it saves memory. //| -//| If ``start`` or ``end`` is provided, then the buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like -//| ``buffer[start:end]`` will so it saves memory. +//| Writing a buffer or slice of length zero is permitted, as it can be used +//| to poll for the existence of a device. //| -//| Writing a buffer or slice of length zero is permitted, as it can be used -//| to poll for the existence of a device. -//| -//| :param int address: 7-bit device address -//| :param bytearray buffer: buffer containing the bytes to write -//| :param int start: Index to start writing from -//| :param int end: Index to read up to but not include -//| :param bool stop: If true, output an I2C stop condition after the buffer is written. -//| Deprecated. Will be removed in 6.x and act as stop=True. +//| :param int address: 7-bit device address +//| :param bytearray buffer: buffer containing the bytes to write +//| :param int start: Index to start writing from +//| :param int end: Index to read up to but not include +//| :param bool stop: If true, output an I2C stop condition after the buffer is written. +//| Deprecated. Will be removed in 6.x and act as stop=True.""" +//| ... //| // Shared arg parsing for writeto and writeto_then_readfrom. STATIC void writeto(bitbangio_i2c_obj_t *self, mp_int_t address, mp_obj_t buffer, int32_t start, mp_int_t end, bool stop) { @@ -271,23 +272,22 @@ STATIC mp_obj_t bitbangio_i2c_writeto(size_t n_args, const mp_obj_t *pos_args, m STATIC MP_DEFINE_CONST_FUN_OBJ_KW(bitbangio_i2c_writeto_obj, 1, bitbangio_i2c_writeto); -//| .. method:: writeto_then_readfrom(address, out_buffer, in_buffer, *, out_start=0, out_end=None, in_start=0, in_end=None) -//| -//| Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop -//| bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and -//| ``in_buffer`` can be the same buffer because they are used sequentially. +//| def writeto_then_readfrom(self, address: int, out_buffer: bytearray, in_buffer: bytearray, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> Any: +//| """Write the bytes from ``out_buffer`` to the slave specified by ``address``, generate no stop +//| bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and +//| ``in_buffer`` can be the same buffer because they are used sequentially. //| -//| If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced -//| as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]`` -//| will so it saves memory. +//| If ``start`` or ``end`` is provided, then the corresponding buffer will be sliced +//| as if ``buffer[start:end]``. This will not cause an allocation like ``buf[start:end]`` +//| will so it saves memory. //| -//| :param int address: 7-bit device address -//| :param bytearray out_buffer: buffer containing the bytes to write -//| :param bytearray in_buffer: buffer to write into -//| :param int out_start: Index to start writing from -//| :param int out_end: Index to read up to but not include. Defaults to ``len(buffer)`` -//| :param int in_start: Index to start writing at -//| :param int in_end: Index to write up to but not include. Defaults to ``len(buffer)`` +//| :param int address: 7-bit device address +//| :param bytearray out_buffer: buffer containing the bytes to write +//| :param bytearray in_buffer: buffer to write into +//| :param int out_start: Index to start writing from +//| :param int out_end: Index to read up to but not include. Defaults to ``len(buffer)`` +//| :param int in_start: Index to start writing at +//| :param int in_end: Index to write up to but not include. Defaults to ``len(buffer)``""" //| STATIC mp_obj_t bitbangio_i2c_writeto_then_readfrom(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_address, ARG_out_buffer, ARG_in_buffer, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; diff --git a/shared-bindings/bitbangio/OneWire.c b/shared-bindings/bitbangio/OneWire.c index 95bbd0679..1c9405bd8 100644 --- a/shared-bindings/bitbangio/OneWire.c +++ b/shared-bindings/bitbangio/OneWire.c @@ -34,33 +34,35 @@ #include "shared-bindings/bitbangio/OneWire.h" #include "shared-bindings/util.h" -//| .. currentmodule:: bitbangio +//| class OneWire: +//| """.. currentmodule:: bitbangio //| -//| :class:`OneWire` -- Lowest-level of the Maxim OneWire protocol -//| =============================================================== +//| :class:`OneWire` -- Lowest-level of the Maxim OneWire protocol +//| =============================================================== //| -//| :class:`~bitbangio.OneWire` implements the timing-sensitive foundation of -//| the Maxim (formerly Dallas Semi) OneWire protocol. +//| :class:`~bitbangio.OneWire` implements the timing-sensitive foundation of +//| the Maxim (formerly Dallas Semi) OneWire protocol. //| -//| Protocol definition is here: https://www.maximintegrated.com/en/app-notes/index.mvp/id/126 +//| Protocol definition is here: https://www.maximintegrated.com/en/app-notes/index.mvp/id/126""" //| -//| .. class:: OneWire(pin) +//| def __init__(self, pin: microcontroller.Pin): //| -//| Create a OneWire object associated with the given pin. The object -//| implements the lowest level timing-sensitive bits of the protocol. +//| """Create a OneWire object associated with the given pin. The object +//| implements the lowest level timing-sensitive bits of the protocol. //| -//| :param ~microcontroller.Pin pin: Pin to read pulses from. +//| :param ~microcontroller.Pin pin: Pin to read pulses from. //| -//| Read a short series of pulses:: +//| Read a short series of pulses:: //| -//| import bitbangio -//| import board +//| import bitbangio +//| import board //| -//| onewire = bitbangio.OneWire(board.D7) -//| onewire.reset() -//| onewire.write_bit(True) -//| onewire.write_bit(False) -//| print(onewire.read_bit()) +//| onewire = bitbangio.OneWire(board.D7) +//| onewire.reset() +//| onewire.write_bit(True) +//| onewire.write_bit(False) +//| print(onewire.read_bit())""" +//| ... //| STATIC mp_obj_t bitbangio_onewire_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_pin }; @@ -79,9 +81,9 @@ STATIC mp_obj_t bitbangio_onewire_make_new(const mp_obj_type_t *type, size_t n_a return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialize the OneWire bus and release any hardware resources for reuse. +//| def deinit(self, ) -> Any: +//| """Deinitialize the OneWire bus and release any hardware resources for reuse.""" +//| ... //| STATIC mp_obj_t bitbangio_onewire_deinit(mp_obj_t self_in) { bitbangio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -96,16 +98,16 @@ STATIC void check_for_deinit(bitbangio_onewire_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t bitbangio_onewire_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -114,9 +116,9 @@ STATIC mp_obj_t bitbangio_onewire_obj___exit__(size_t n_args, const mp_obj_t *ar } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(bitbangio_onewire___exit___obj, 4, 4, bitbangio_onewire_obj___exit__); -//| .. method:: reset() -//| -//| Reset the OneWire bus +//| def reset(self, ) -> Any: +//| """Reset the OneWire bus""" +//| ... //| STATIC mp_obj_t bitbangio_onewire_obj_reset(mp_obj_t self_in) { bitbangio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -126,12 +128,12 @@ STATIC mp_obj_t bitbangio_onewire_obj_reset(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(bitbangio_onewire_reset_obj, bitbangio_onewire_obj_reset); -//| .. method:: read_bit() -//| -//| Read in a bit +//| def read_bit(self, ) -> Any: +//| """Read in a bit //| -//| :returns: bit state read -//| :rtype: bool +//| :returns: bit state read +//| :rtype: bool""" +//| ... //| STATIC mp_obj_t bitbangio_onewire_obj_read_bit(mp_obj_t self_in) { bitbangio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -141,9 +143,9 @@ STATIC mp_obj_t bitbangio_onewire_obj_read_bit(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(bitbangio_onewire_read_bit_obj, bitbangio_onewire_obj_read_bit); -//| .. method:: write_bit(value) -//| -//| Write out a bit based on value. +//| def write_bit(self, value: Any) -> Any: +//| """Write out a bit based on value.""" +//| ... //| STATIC mp_obj_t bitbangio_onewire_obj_write_bit(mp_obj_t self_in, mp_obj_t bool_obj) { bitbangio_onewire_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/bitbangio/SPI.c b/shared-bindings/bitbangio/SPI.c index b1a94c184..38e0926e8 100644 --- a/shared-bindings/bitbangio/SPI.c +++ b/shared-bindings/bitbangio/SPI.c @@ -39,26 +39,27 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: bitbangio +//| class SPI: +//| """.. currentmodule:: bitbangio //| -//| :class:`SPI` -- a 3-4 wire serial protocol -//| ----------------------------------------------- +//| :class:`SPI` -- a 3-4 wire serial protocol +//| ----------------------------------------------- //| -//| SPI is a serial protocol that has exclusive pins for data in and out of the -//| master. It is typically faster than :py:class:`~bitbangio.I2C` because a -//| separate pin is used to control the active slave rather than a transmitted -//| address. This class only manages three of the four SPI lines: `!clock`, -//| `!MOSI`, `!MISO`. Its up to the client to manage the appropriate slave -//| select line. (This is common because multiple slaves can share the `!clock`, -//| `!MOSI` and `!MISO` lines and therefore the hardware.) +//| SPI is a serial protocol that has exclusive pins for data in and out of the +//| master. It is typically faster than :py:class:`~bitbangio.I2C` because a +//| separate pin is used to control the active slave rather than a transmitted +//| address. This class only manages three of the four SPI lines: `!clock`, +//| `!MOSI`, `!MISO`. Its up to the client to manage the appropriate slave +//| select line. (This is common because multiple slaves can share the `!clock`, +//| `!MOSI` and `!MISO` lines and therefore the hardware.)""" //| -//| .. class:: SPI(clock, MOSI=None, MISO=None) +//| def __init__(self, clock: microcontroller.Pin, MOSI: microcontroller.Pin = None, MISO: microcontroller.Pin = None): +//| """Construct an SPI object on the given pins. //| -//| Construct an SPI object on the given pins. -//| -//| :param ~microcontroller.Pin clock: the pin to use for the clock. -//| :param ~microcontroller.Pin MOSI: the Master Out Slave In pin. -//| :param ~microcontroller.Pin MISO: the Master In Slave Out pin. +//| :param ~microcontroller.Pin clock: the pin to use for the clock. +//| :param ~microcontroller.Pin MOSI: the Master Out Slave In pin. +//| :param ~microcontroller.Pin MISO: the Master In Slave Out pin.""" +//| ... //| // TODO(tannewt): Support LSB SPI. @@ -82,9 +83,9 @@ STATIC mp_obj_t bitbangio_spi_make_new(const mp_obj_type_t *type, size_t n_args, return (mp_obj_t)self; } -//| .. method:: deinit() -//| -//| Turn off the SPI bus. +//| def deinit(self, ) -> Any: +//| """Turn off the SPI bus.""" +//| ... //| STATIC mp_obj_t bitbangio_spi_obj_deinit(mp_obj_t self_in) { bitbangio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -99,16 +100,16 @@ STATIC void check_for_deinit(bitbangio_spi_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t bitbangio_spi_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -124,15 +125,15 @@ static void check_lock(bitbangio_spi_obj_t *self) { } } -//| .. method:: configure(*, baudrate=100000, polarity=0, phase=0, bits=8) -//| -//| Configures the SPI bus. Only valid when locked. +//| def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: +//| """Configures the SPI bus. Only valid when locked. //| -//| :param int baudrate: the clock rate in Hertz -//| :param int polarity: the base state of the clock line (0 or 1) -//| :param int phase: the edge of the clock that data is captured. First (0) -//| or second (1). Rising or falling depends on clock polarity. -//| :param int bits: the number of bits per word +//| :param int baudrate: the clock rate in Hertz +//| :param int polarity: the base state of the clock line (0 or 1) +//| :param int phase: the edge of the clock that data is captured. First (0) +//| or second (1). Rising or falling depends on clock polarity. +//| :param int bits: the number of bits per word""" +//| ... //| STATIC mp_obj_t bitbangio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_baudrate, ARG_polarity, ARG_phase, ARG_bits }; @@ -166,12 +167,12 @@ STATIC mp_obj_t bitbangio_spi_configure(size_t n_args, const mp_obj_t *pos_args, } MP_DEFINE_CONST_FUN_OBJ_KW(bitbangio_spi_configure_obj, 1, bitbangio_spi_configure); -//| .. method:: try_lock() +//| def try_lock(self, ) -> Any: +//| """Attempts to grab the SPI lock. Returns True on success. //| -//| Attempts to grab the SPI lock. Returns True on success. -//| -//| :return: True when lock has been grabbed -//| :rtype: bool +//| :return: True when lock has been grabbed +//| :rtype: bool""" +//| ... //| STATIC mp_obj_t bitbangio_spi_obj_try_lock(mp_obj_t self_in) { bitbangio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -180,9 +181,9 @@ STATIC mp_obj_t bitbangio_spi_obj_try_lock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(bitbangio_spi_try_lock_obj, bitbangio_spi_obj_try_lock); -//| .. method:: unlock() -//| -//| Releases the SPI lock. +//| def unlock(self, ) -> Any: +//| """Releases the SPI lock.""" +//| ... //| STATIC mp_obj_t bitbangio_spi_obj_unlock(mp_obj_t self_in) { bitbangio_spi_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -192,10 +193,10 @@ STATIC mp_obj_t bitbangio_spi_obj_unlock(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(bitbangio_spi_unlock_obj, bitbangio_spi_obj_unlock); -//| .. method:: write(buf) -//| -//| Write the data contained in ``buf``. Requires the SPI being locked. -//| If the buffer is empty, nothing happens. +//| def write(self, buf: Any) -> Any: +//| """Write the data contained in ``buf``. Requires the SPI being locked. +//| If the buffer is empty, nothing happens.""" +//| ... //| // TODO(tannewt): Add support for start and end kwargs. STATIC mp_obj_t bitbangio_spi_write(mp_obj_t self_in, mp_obj_t wr_buf) { @@ -216,11 +217,11 @@ STATIC mp_obj_t bitbangio_spi_write(mp_obj_t self_in, mp_obj_t wr_buf) { MP_DEFINE_CONST_FUN_OBJ_2(bitbangio_spi_write_obj, bitbangio_spi_write); -//| .. method:: readinto(buf) -//| -//| Read into the buffer specified by ``buf`` while writing zeroes. -//| Requires the SPI being locked. -//| If the number of bytes to read is 0, nothing happens. +//| def readinto(self, buf: Any) -> Any: +//| """Read into the buffer specified by ``buf`` while writing zeroes. +//| Requires the SPI being locked. +//| If the number of bytes to read is 0, nothing happens.""" +//| ... //| // TODO(tannewt): Add support for start and end kwargs. STATIC mp_obj_t bitbangio_spi_readinto(size_t n_args, const mp_obj_t *args) { @@ -240,19 +241,19 @@ STATIC mp_obj_t bitbangio_spi_readinto(size_t n_args, const mp_obj_t *args) { } MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(bitbangio_spi_readinto_obj, 2, 2, bitbangio_spi_readinto); -//| .. method:: write_readinto(buffer_out, buffer_in, *, out_start=0, out_end=None, in_start=0, in_end=None) -//| -//| Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``. -//| The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]`` -//| must be equal. -//| If buffer slice lengths are both 0, nothing happens. +//| def write_readinto(self, buffer_out: bytearray, buffer_in: bytearray, *, out_start: Any = 0, out_end: int = None, in_start: Any = 0, in_end: int = None) -> Any: +//| """Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``. +//| The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]`` +//| must be equal. +//| If buffer slice lengths are both 0, nothing happens. //| -//| :param bytearray buffer_out: Write out the data in this buffer -//| :param bytearray buffer_in: Read data into this buffer -//| :param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]`` -//| :param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)`` -//| :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` -//| :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)`` +//| :param bytearray buffer_out: Write out the data in this buffer +//| :param bytearray buffer_in: Read data into this buffer +//| :param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]`` +//| :param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)`` +//| :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` +//| :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``""" +//| ... //| STATIC mp_obj_t bitbangio_spi_write_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer_out, ARG_buffer_in, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; diff --git a/shared-bindings/bitbangio/__init__.c b/shared-bindings/bitbangio/__init__.c index 3123fb199..e9600a7e6 100644 --- a/shared-bindings/bitbangio/__init__.c +++ b/shared-bindings/bitbangio/__init__.c @@ -40,7 +40,7 @@ #include "py/runtime.h" -//| :mod:`bitbangio` --- Digital protocols implemented by the CPU +//| """:mod:`bitbangio` --- Digital protocols implemented by the CPU //| ============================================================= //| //| .. module:: bitbangio @@ -81,7 +81,7 @@ //| This example will initialize the the device, run //| :py:meth:`~bitbangio.I2C.scan` and then :py:meth:`~bitbangio.I2C.deinit` the //| hardware. The last step is optional because CircuitPython automatically -//| resets hardware after a program finishes. +//| resets hardware after a program finishes.""" //| STATIC const mp_rom_map_elem_t bitbangio_module_globals_table[] = { -- cgit v1.2.3 From 2ebe3035dff0ce66b2fe65eb91d6889c4ba93b5c Mon Sep 17 00:00:00 2001 From: dherrada Date: Thu, 7 May 2020 10:54:09 -0400 Subject: Did board, digitalio, displayio --- shared-bindings/board/__init__.c | 33 +++-- shared-bindings/digitalio/DigitalInOut.c | 109 +++++++-------- shared-bindings/digitalio/Direction.c | 25 ++-- shared-bindings/digitalio/DriveMode.c | 27 ++-- shared-bindings/digitalio/Pull.c | 29 ++-- shared-bindings/digitalio/__init__.c | 4 +- shared-bindings/displayio/Bitmap.c | 65 +++++---- shared-bindings/displayio/ColorConverter.c | 31 +++-- shared-bindings/displayio/Display.c | 216 ++++++++++++++--------------- shared-bindings/displayio/EPaperDisplay.c | 128 ++++++++--------- shared-bindings/displayio/FourWire.c | 57 ++++---- shared-bindings/displayio/Group.c | 115 ++++++++------- shared-bindings/displayio/I2CDisplay.c | 47 ++++--- shared-bindings/displayio/OnDiskBitmap.c | 79 ++++++----- shared-bindings/displayio/Palette.c | 58 ++++---- shared-bindings/displayio/ParallelBus.c | 58 ++++---- shared-bindings/displayio/Shape.c | 31 +++-- shared-bindings/displayio/TileGrid.c | 107 +++++++------- shared-bindings/displayio/__init__.c | 18 +-- 19 files changed, 610 insertions(+), 627 deletions(-) diff --git a/shared-bindings/board/__init__.c b/shared-bindings/board/__init__.c index 3dda59fb8..501879be8 100644 --- a/shared-bindings/board/__init__.c +++ b/shared-bindings/board/__init__.c @@ -29,7 +29,7 @@ #include "shared-bindings/board/__init__.h" -//| :mod:`board` --- Board specific pin names +//| """:mod:`board` --- Board specific pin names //| ======================================================== //| //| .. module:: board @@ -39,11 +39,11 @@ //| board so don't expect portability when using this module. //| //| .. warning:: The board module varies by board. The APIs documented here may or may not be -//| available on a specific board. +//| available on a specific board.""" -//| .. function:: I2C() -//| -//| Returns the `busio.I2C` object for the board designated SDA and SCL pins. It is a singleton. +//| def I2C() -> Any: +//| """Returns the `busio.I2C` object for the board designated SDA and SCL pins. It is a singleton.""" +//| ... //| #if BOARD_I2C @@ -65,10 +65,10 @@ mp_obj_t board_i2c(void) { MP_DEFINE_CONST_FUN_OBJ_0(board_i2c_obj, board_i2c); -//| .. function:: SPI() -//| -//| Returns the `busio.SPI` object for the board designated SCK, MOSI and MISO pins. It is a -//| singleton. +//| def SPI() -> Any: +//| """Returns the `busio.SPI` object for the board designated SCK, MOSI and MISO pins. It is a +//| singleton.""" +//| ... //| #if BOARD_SPI mp_obj_t board_spi(void) { @@ -89,15 +89,14 @@ mp_obj_t board_spi(void) { #endif MP_DEFINE_CONST_FUN_OBJ_0(board_spi_obj, board_spi); -//| .. function:: UART() -//| -//| Returns the `busio.UART` object for the board designated TX and RX pins. It is a singleton. -//| -//| The object created uses the default parameter values for `busio.UART`. If you need to set -//| parameters that are not changeable after creation, such as ``receiver_buffer_size``, -//| do not use `board.UART()`; instead create a `busio.UART` object explicitly with the -//| desired parameters. +//| def UART() -> Any: +//| """Returns the `busio.UART` object for the board designated TX and RX pins. It is a singleton. //| +//| The object created uses the default parameter values for `busio.UART`. If you need to set +//| parameters that are not changeable after creation, such as ``receiver_buffer_size``, +//| do not use `board.UART()`; instead create a `busio.UART` object explicitly with the +//| desired parameters.""" +//| ... //| #if BOARD_UART mp_obj_t board_uart(void) { diff --git a/shared-bindings/digitalio/DigitalInOut.c b/shared-bindings/digitalio/DigitalInOut.c index 39da00cf7..5fffb3f65 100644 --- a/shared-bindings/digitalio/DigitalInOut.c +++ b/shared-bindings/digitalio/DigitalInOut.c @@ -43,23 +43,23 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: digitalio +//| class DigitalInOut: +//| """.. currentmodule:: digitalio //| -//| :class:`DigitalInOut` -- digital input and output -//| ========================================================= +//| :class:`DigitalInOut` -- digital input and output +//| ========================================================= //| -//| A DigitalInOut is used to digitally control I/O pins. For analog control of -//| a pin, see the :py:class:`analogio.AnalogIn` and -//| :py:class:`analogio.AnalogOut` classes. +//| A DigitalInOut is used to digitally control I/O pins. For analog control of +//| a pin, see the :py:class:`analogio.AnalogIn` and +//| :py:class:`analogio.AnalogOut` classes.""" //| - -//| .. class:: DigitalInOut(pin) -//| -//| Create a new DigitalInOut object associated with the pin. Defaults to input -//| with no pull. Use :py:meth:`switch_to_input` and -//| :py:meth:`switch_to_output` to change the direction. +//| def __init__(self, pin: microcontroller.Pin): +//| """Create a new DigitalInOut object associated with the pin. Defaults to input +//| with no pull. Use :py:meth:`switch_to_input` and +//| :py:meth:`switch_to_output` to change the direction. //| -//| :param ~microcontroller.Pin pin: The pin to control +//| :param ~microcontroller.Pin pin: The pin to control""" +//| ... //| STATIC mp_obj_t digitalio_digitalinout_make_new(const mp_obj_type_t *type, mp_uint_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { @@ -74,9 +74,9 @@ STATIC mp_obj_t digitalio_digitalinout_make_new(const mp_obj_type_t *type, return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Turn off the DigitalInOut and release the pin for other use. +//| def deinit(self, ) -> Any: +//| """Turn off the DigitalInOut and release the pin for other use.""" +//| ... //| STATIC mp_obj_t digitalio_digitalinout_obj_deinit(mp_obj_t self_in) { digitalio_digitalinout_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -85,16 +85,16 @@ STATIC mp_obj_t digitalio_digitalinout_obj_deinit(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(digitalio_digitalinout_deinit_obj, digitalio_digitalinout_obj_deinit); -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t digitalio_digitalinout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -109,14 +109,13 @@ STATIC void check_for_deinit(digitalio_digitalinout_obj_t *self) { } } +//| def switch_to_output(self, value: bool = False, drive_mode: digitalio.DriveMode = digitalio.DriveMode.PUSH_PULL) -> Any: +//| """Set the drive mode and value and then switch to writing out digital +//| values. //| -//| .. method:: switch_to_output(value=False, drive_mode=digitalio.DriveMode.PUSH_PULL) -//| -//| Set the drive mode and value and then switch to writing out digital -//| values. -//| -//| :param bool value: default value to set upon switching -//| :param ~digitalio.DriveMode drive_mode: drive mode for the output +//| :param bool value: default value to set upon switching +//| :param ~digitalio.DriveMode drive_mode: drive mode for the output""" +//| ... //| STATIC mp_obj_t digitalio_digitalinout_switch_to_output(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_value, ARG_drive_mode }; @@ -139,22 +138,22 @@ STATIC mp_obj_t digitalio_digitalinout_switch_to_output(size_t n_args, const mp_ } MP_DEFINE_CONST_FUN_OBJ_KW(digitalio_digitalinout_switch_to_output_obj, 1, digitalio_digitalinout_switch_to_output); -//| .. method:: switch_to_input(pull=None) -//| -//| Set the pull and then switch to read in digital values. +//| def switch_to_input(self, pull: Pull = None) -> Any: +//| """Set the pull and then switch to read in digital values. //| -//| :param Pull pull: pull configuration for the input +//| :param Pull pull: pull configuration for the input //| -//| Example usage:: +//| Example usage:: //| -//| import digitalio -//| import board +//| import digitalio +//| import board //| -//| switch = digitalio.DigitalInOut(board.SLIDE_SWITCH) -//| switch.switch_to_input(pull=digitalio.Pull.UP) -//| # Or, after switch_to_input -//| switch.pull = digitalio.Pull.UP -//| print(switch.value) +//| switch = digitalio.DigitalInOut(board.SLIDE_SWITCH) +//| switch.switch_to_input(pull=digitalio.Pull.UP) +//| # Or, after switch_to_input +//| switch.pull = digitalio.Pull.UP +//| print(switch.value)""" +//| ... //| STATIC mp_obj_t digitalio_digitalinout_switch_to_input(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_pull }; @@ -178,14 +177,13 @@ STATIC mp_obj_t digitalio_digitalinout_switch_to_input(size_t n_args, const mp_o } MP_DEFINE_CONST_FUN_OBJ_KW(digitalio_digitalinout_switch_to_input_obj, 1, digitalio_digitalinout_switch_to_input); -//| .. attribute:: direction -//| -//| The direction of the pin. +//| direction: Any = ... +//| """The direction of the pin. //| //| Setting this will use the defaults from the corresponding //| :py:meth:`switch_to_input` or :py:meth:`switch_to_output` method. If //| you want to set pull, value or drive mode prior to switching, then use -//| those methods instead. +//| those methods instead.""" //| typedef struct { mp_obj_base_t base; @@ -225,9 +223,8 @@ const mp_obj_property_t digitalio_digitalio_direction_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: value -//| -//| The digital logic level of the pin. +//| value: Any = ... +//| """The digital logic level of the pin.""" //| STATIC mp_obj_t digitalio_digitalinout_obj_get_value(mp_obj_t self_in) { digitalio_digitalinout_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -256,12 +253,11 @@ const mp_obj_property_t digitalio_digitalinout_value_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: drive_mode -//| -//| The pin drive mode. One of: +//| drive_mode: Any = ... +//| """The pin drive mode. One of: //| //| - `digitalio.DriveMode.PUSH_PULL` -//| - `digitalio.DriveMode.OPEN_DRAIN` +//| - `digitalio.DriveMode.OPEN_DRAIN`""" //| STATIC mp_obj_t digitalio_digitalinout_obj_get_drive_mode(mp_obj_t self_in) { digitalio_digitalinout_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -301,15 +297,14 @@ const mp_obj_property_t digitalio_digitalio_drive_mode_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: pull -//| -//| The pin pull direction. One of: +//| pull: Any = ... +//| """The pin pull direction. One of: //| //| - `digitalio.Pull.UP` //| - `digitalio.Pull.DOWN` //| - `None` //| -//| :raises AttributeError: if `direction` is :py:data:`~digitalio.Direction.OUTPUT`. +//| :raises AttributeError: if `direction` is :py:data:`~digitalio.Direction.OUTPUT`.""" //| STATIC mp_obj_t digitalio_digitalinout_obj_get_pull(mp_obj_t self_in) { digitalio_digitalinout_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/digitalio/Direction.c b/shared-bindings/digitalio/Direction.c index c8188fc89..0586e95de 100644 --- a/shared-bindings/digitalio/Direction.c +++ b/shared-bindings/digitalio/Direction.c @@ -38,23 +38,22 @@ #include "shared-bindings/microcontroller/Pin.h" #include "shared-bindings/digitalio/DigitalInOut.h" -//| .. currentmodule:: digitalio +//| class Direction: +//| """.. currentmodule:: digitalio //| -//| :class:`Direction` -- defines the direction of a digital pin -//| ============================================================= +//| :class:`Direction` -- defines the direction of a digital pin +//| =============================================================""" //| -//| .. class:: Direction +//| def __init__(self, ): +//| """Enum-like class to define which direction the digital values are +//| going.""" +//| ... //| -//| Enum-like class to define which direction the digital values are -//| going. +//| INPUT: Any = ... +//| """Read digital data in""" //| -//| .. data:: INPUT -//| -//| Read digital data in -//| -//| .. data:: OUTPUT -//| -//| Write digital data out +//| OUTPUT: Any = ... +//| """Write digital data out""" //| const mp_obj_type_t digitalio_direction_type; diff --git a/shared-bindings/digitalio/DriveMode.c b/shared-bindings/digitalio/DriveMode.c index 51e1e2ee5..23745b046 100644 --- a/shared-bindings/digitalio/DriveMode.c +++ b/shared-bindings/digitalio/DriveMode.c @@ -26,24 +26,23 @@ #include "shared-bindings/digitalio/DriveMode.h" -//| .. currentmodule:: digitalio +//| class DriveMode: +//| """.. currentmodule:: digitalio //| -//| :class:`DriveMode` -- defines the drive mode of a digital pin -//| ============================================================= +//| :class:`DriveMode` -- defines the drive mode of a digital pin +//| =============================================================""" //| -//| .. class:: DriveMode +//| def __init__(self, ): +//| """Enum-like class to define the drive mode used when outputting +//| digital values.""" +//| ... //| -//| Enum-like class to define the drive mode used when outputting -//| digital values. +//| PUSH_PULL: Any = ... +//| """Output both high and low digital values""" //| -//| .. data:: PUSH_PULL -//| -//| Output both high and low digital values -//| -//| .. data:: OPEN_DRAIN -//| -//| Output low digital values but go into high z for digital high. This is -//| useful for i2c and other protocols that share a digital line. +//| OPEN_DRAIN: Any = ... +//| """Output low digital values but go into high z for digital high. This is +//| useful for i2c and other protocols that share a digital line.""" //| const mp_obj_type_t digitalio_drive_mode_type; diff --git a/shared-bindings/digitalio/Pull.c b/shared-bindings/digitalio/Pull.c index 813268db7..1e64d0788 100644 --- a/shared-bindings/digitalio/Pull.c +++ b/shared-bindings/digitalio/Pull.c @@ -26,25 +26,24 @@ #include "shared-bindings/digitalio/Pull.h" -//| .. currentmodule:: digitalio +//| class Pull: +//| """.. currentmodule:: digitalio //| -//| :class:`Pull` -- defines the pull of a digital input pin -//| ============================================================= +//| :class:`Pull` -- defines the pull of a digital input pin +//| =============================================================""" //| -//| .. class:: Pull +//| def __init__(self, ): +//| """Enum-like class to define the pull value, if any, used while reading +//| digital values in.""" +//| ... //| -//| Enum-like class to define the pull value, if any, used while reading -//| digital values in. +//| UP: Any = ... +//| """When the input line isn't being driven the pull up can pull the state +//| of the line high so it reads as true.""" //| -//| .. data:: UP -//| -//| When the input line isn't being driven the pull up can pull the state -//| of the line high so it reads as true. -//| -//| .. data:: DOWN -//| -//| When the input line isn't being driven the pull down can pull the -//| state of the line low so it reads as false. +//| DOWN: Any = ... +//| """When the input line isn't being driven the pull down can pull the +//| state of the line low so it reads as false.""" //| const mp_obj_type_t digitalio_pull_type; diff --git a/shared-bindings/digitalio/__init__.c b/shared-bindings/digitalio/__init__.c index 1632262d2..5a11436a2 100644 --- a/shared-bindings/digitalio/__init__.c +++ b/shared-bindings/digitalio/__init__.c @@ -38,7 +38,7 @@ #include "py/runtime.h" -//| :mod:`digitalio` --- Basic digital pin support +//| """:mod:`digitalio` --- Basic digital pin support //| ================================================= //| //| .. module:: digitalio @@ -86,7 +86,7 @@ //| led.value = True //| time.sleep(0.1) //| led.value = False -//| time.sleep(0.1) +//| time.sleep(0.1)""" //| STATIC const mp_rom_map_elem_t digitalio_module_globals_table[] = { diff --git a/shared-bindings/displayio/Bitmap.c b/shared-bindings/displayio/Bitmap.c index 391f3e595..d15c3b107 100644 --- a/shared-bindings/displayio/Bitmap.c +++ b/shared-bindings/displayio/Bitmap.c @@ -36,22 +36,23 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: displayio +//| class Bitmap: +//| """.. currentmodule:: displayio //| -//| :class:`Bitmap` -- Stores values in a 2D array -//| ========================================================================== +//| :class:`Bitmap` -- Stores values in a 2D array +//| ========================================================================== //| -//| Stores values of a certain size in a 2D array +//| Stores values of a certain size in a 2D array""" //| -//| .. class:: Bitmap(width, height, value_count) +//| def __init__(self, width: int, height: int, value_count: int): +//| """Create a Bitmap object with the given fixed size. Each pixel stores a value that is used to +//| index into a corresponding palette. This enables differently colored sprites to share the +//| underlying Bitmap. value_count is used to minimize the memory used to store the Bitmap. //| -//| Create a Bitmap object with the given fixed size. Each pixel stores a value that is used to -//| index into a corresponding palette. This enables differently colored sprites to share the -//| underlying Bitmap. value_count is used to minimize the memory used to store the Bitmap. -//| -//| :param int width: The number of values wide -//| :param int height: The number of values high -//| :param int value_count: The number of possible pixel values. +//| :param int width: The number of values wide +//| :param int height: The number of values high +//| :param int value_count: The number of possible pixel values.""" +//| ... //| STATIC mp_obj_t displayio_bitmap_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 3, 3, false); @@ -77,9 +78,8 @@ STATIC mp_obj_t displayio_bitmap_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| .. attribute:: width -//| -//| Width of the bitmap. (read only) +//| width: Any = ... +//| """Width of the bitmap. (read only)""" //| STATIC mp_obj_t displayio_bitmap_obj_get_width(mp_obj_t self_in) { displayio_bitmap_t *self = MP_OBJ_TO_PTR(self_in); @@ -96,9 +96,8 @@ const mp_obj_property_t displayio_bitmap_width_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: height -//| -//| Height of the bitmap. (read only) +//| height: Any = ... +//| """Height of the bitmap. (read only)""" //| STATIC mp_obj_t displayio_bitmap_obj_get_height(mp_obj_t self_in) { displayio_bitmap_t *self = MP_OBJ_TO_PTR(self_in); @@ -115,23 +114,23 @@ const mp_obj_property_t displayio_bitmap_height_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: __getitem__(index) +//| def __getitem__(self, index: Any) -> Any: +//| """Returns the value at the given index. The index can either be an x,y tuple or an int equal +//| to ``y * width + x``. //| -//| Returns the value at the given index. The index can either be an x,y tuple or an int equal -//| to ``y * width + x``. +//| This allows you to:: //| -//| This allows you to:: +//| print(bitmap[0,1])""" +//| ... //| -//| print(bitmap[0,1]) +//| def __setitem__(self, index: Any, value: Any) -> Any: +//| """Sets the value at the given index. The index can either be an x,y tuple or an int equal +//| to ``y * width + x``. //| -//| .. method:: __setitem__(index, value) +//| This allows you to:: //| -//| Sets the value at the given index. The index can either be an x,y tuple or an int equal -//| to ``y * width + x``. -//| -//| This allows you to:: -//| -//| bitmap[0,1] = 3 +//| bitmap[0,1] = 3""" +//| ... //| STATIC mp_obj_t bitmap_subscr(mp_obj_t self_in, mp_obj_t index_obj, mp_obj_t value_obj) { if (value_obj == mp_const_none) { @@ -178,9 +177,9 @@ STATIC mp_obj_t bitmap_subscr(mp_obj_t self_in, mp_obj_t index_obj, mp_obj_t val return mp_const_none; } -//| .. method:: fill(value) -//| -//| Fills the bitmap with the supplied palette index value. +//| def fill(self, value: Any) -> Any: +//| """Fills the bitmap with the supplied palette index value.""" +//| ... //| STATIC mp_obj_t displayio_bitmap_obj_fill(mp_obj_t self_in, mp_obj_t value_obj) { displayio_bitmap_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/displayio/ColorConverter.c b/shared-bindings/displayio/ColorConverter.c index db2d1b6e2..1d6e5a0cc 100644 --- a/shared-bindings/displayio/ColorConverter.c +++ b/shared-bindings/displayio/ColorConverter.c @@ -36,18 +36,20 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: displayio +//| class ColorConverter: +//| """.. currentmodule:: displayio //| -//| :class:`ColorConverter` -- Converts one color format to another -//| ========================================================================================= +//| :class:`ColorConverter` -- Converts one color format to another +//| ========================================================================================= //| -//| Converts one color format to another. +//| Converts one color format to another.""" //| -//| .. class:: ColorConverter(*, dither=False) +//| def __init__(self, *, dither: bool = False): +//| """Create a ColorConverter object to convert color formats. Only supports RGB888 to RGB565 +//| currently. +//| :param bool dither: Adds random noise to dither the output image""" +//| ... //| -//| Create a ColorConverter object to convert color formats. Only supports RGB888 to RGB565 -//| currently. -//| :param bool dither: Adds random noise to dither the output image // TODO(tannewt): Add support for other color formats. //| @@ -68,9 +70,9 @@ STATIC mp_obj_t displayio_colorconverter_make_new(const mp_obj_type_t *type, siz return MP_OBJ_FROM_PTR(self); } -//| .. method:: convert(color) -//| -//| Converts the given RGB888 color to RGB565 +//| def convert(self, color: Any) -> Any: +//| """Converts the given RGB888 color to RGB565""" +//| ... //| STATIC mp_obj_t displayio_colorconverter_obj_convert(mp_obj_t self_in, mp_obj_t color_obj) { displayio_colorconverter_t *self = MP_OBJ_TO_PTR(self_in); @@ -87,10 +89,9 @@ STATIC mp_obj_t displayio_colorconverter_obj_convert(mp_obj_t self_in, mp_obj_t } MP_DEFINE_CONST_FUN_OBJ_2(displayio_colorconverter_convert_obj, displayio_colorconverter_obj_convert); -//| .. attribute:: dither -//| -//| When true the color converter dithers the output by adding random noise when -//| truncating to display bitdepth +//| dither: Any = ... +//| """When true the color converter dithers the output by adding random noise when +//| truncating to display bitdepth""" //| STATIC mp_obj_t displayio_colorconverter_obj_get_dither(mp_obj_t self_in) { displayio_colorconverter_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/displayio/Display.c b/shared-bindings/displayio/Display.c index a22b2add2..12abec1c8 100644 --- a/shared-bindings/displayio/Display.c +++ b/shared-bindings/displayio/Display.c @@ -39,73 +39,74 @@ #include "shared-module/displayio/__init__.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: displayio -//| -//| :class:`Display` -- Manage updating a display over a display bus -//| ========================================================================== -//| -//| This initializes a display and connects it into CircuitPython. Unlike other -//| objects in CircuitPython, Display objects live until `displayio.release_displays()` -//| is called. This is done so that CircuitPython can use the display itself. -//| -//| Most people should not use this class directly. Use a specific display driver instead that will -//| contain the initialization sequence at minimum. -//| -//| .. class:: Display(display_bus, init_sequence, *, width, height, colstart=0, rowstart=0, rotation=0, color_depth=16, grayscale=False, pixels_in_byte_share_row=True, bytes_per_cell=1, reverse_pixels_in_byte=False, set_column_command=0x2a, set_row_command=0x2b, write_ram_command=0x2c, set_vertical_scroll=0, backlight_pin=None, brightness_command=None, brightness=1.0, auto_brightness=False, single_byte_bounds=False, data_as_commands=False, auto_refresh=True, native_frames_per_second=60) -//| -//| Create a Display object on the given display bus (`displayio.FourWire` or `displayio.ParallelBus`). -//| -//| The ``init_sequence`` is bitpacked to minimize the ram impact. Every command begins with a -//| command byte followed by a byte to determine the parameter count and if a delay is need after. -//| When the top bit of the second byte is 1, the next byte will be the delay time in milliseconds. -//| The remaining 7 bits are the parameter count excluding any delay byte. The third through final -//| bytes are the remaining command parameters. The next byte will begin a new command definition. -//| Here is a portion of ILI9341 init code: -//| -//| .. code-block:: python -//| -//| init_sequence = (b"\xe1\x0f\x00\x0E\x14\x03\x11\x07\x31\xC1\x48\x08\x0F\x0C\x31\x36\x0F" # Set Gamma -//| b"\x11\x80\x78"# Exit Sleep then delay 0x78 (120ms) -//| b"\x29\x80\x78"# Display on then delay 0x78 (120ms) -//| ) -//| display = displayio.Display(display_bus, init_sequence, width=320, height=240) -//| -//| The first command is 0xe1 with 15 (0xf) parameters following. The second and third are 0x11 and -//| 0x29 respectively with delays (0x80) of 120ms (0x78) and no parameters. Multiple byte literals -//| (b"") are merged together on load. The parens are needed to allow byte literals on subsequent -//| lines. -//| -//| The initialization sequence should always leave the display memory access inline with the scan -//| of the display to minimize tearing artifacts. -//| -//| :param display_bus: The bus that the display is connected to -//| :type display_bus: displayio.FourWire or displayio.ParallelBus -//| :param buffer init_sequence: Byte-packed initialization sequence. -//| :param int width: Width in pixels -//| :param int height: Height in pixels -//| :param int colstart: The index if the first visible column -//| :param int rowstart: The index if the first visible row -//| :param int rotation: The rotation of the display in degrees clockwise. Must be in 90 degree increments (0, 90, 180, 270) -//| :param int color_depth: The number of bits of color per pixel transmitted. (Some displays -//| support 18 bit but 16 is easier to transmit. The last bit is extrapolated.) -//| :param bool grayscale: True if the display only shows a single color. -//| :param bool pixels_in_byte_share_row: True when pixels are less than a byte and a byte includes pixels from the same row of the display. When False, pixels share a column. -//| :param int bytes_per_cell: Number of bytes per addressable memory location when color_depth < 8. When greater than one, bytes share a row or column according to pixels_in_byte_share_row. -//| :param bool reverse_pixels_in_byte: Reverses the pixel order within each byte when color_depth < 8. Does not apply across multiple bytes even if there is more than one byte per cell (bytes_per_cell.) -//| :param bool reverse_bytes_in_word: Reverses the order of bytes within a word when color_depth == 16 -//| :param int set_column_command: Command used to set the start and end columns to update -//| :param int set_row_command: Command used so set the start and end rows to update -//| :param int write_ram_command: Command used to write pixels values into the update region. Ignored if data_as_commands is set. -//| :param int set_vertical_scroll: Command used to set the first row to show -//| :param microcontroller.Pin backlight_pin: Pin connected to the display's backlight -//| :param int brightness_command: Command to set display brightness. Usually available in OLED controllers. -//| :param bool brightness: Initial display brightness. This value is ignored if auto_brightness is True. -//| :param bool auto_brightness: If True, brightness is controlled via an ambient light sensor or other mechanism. -//| :param bool single_byte_bounds: Display column and row commands use single bytes -//| :param bool data_as_commands: Treat all init and boundary data as SPI commands. Certain displays require this. -//| :param bool auto_refresh: Automatically refresh the screen -//| :param int native_frames_per_second: Number of display refreshes per second that occur with the given init_sequence. -//| :param bool backlight_on_high: If True, pulling the backlight pin high turns the backlight on. +//| class Display: +//| """.. currentmodule:: displayio +//| +//| :class:`Display` -- Manage updating a display over a display bus +//| ========================================================================== +//| +//| This initializes a display and connects it into CircuitPython. Unlike other +//| objects in CircuitPython, Display objects live until `displayio.release_displays()` +//| is called. This is done so that CircuitPython can use the display itself. +//| +//| Most people should not use this class directly. Use a specific display driver instead that will +//| contain the initialization sequence at minimum.""" +//| +//| def __init__(self, display_bus: Any, init_sequence: buffer, *, width: int, height: int, colstart: int = 0, rowstart: int = 0, rotation: int = 0, color_depth: int = 16, grayscale: bool = False, pixels_in_byte_share_row: bool = True, bytes_per_cell: int = 1, reverse_pixels_in_byte: bool = False, set_column_command: int = 0x2a, set_row_command: int = 0x2b, write_ram_command: int = 0x2c, set_vertical_scroll: int = 0, backlight_pin: microcontroller.Pin = None, brightness_command: int = None, brightness: bool = 1.0, auto_brightness: bool = False, single_byte_bounds: bool = False, data_as_commands: bool = False, auto_refresh: bool = True, native_frames_per_second: int = 60): +//| """Create a Display object on the given display bus (`displayio.FourWire` or `displayio.ParallelBus`). +//| +//| The ``init_sequence`` is bitpacked to minimize the ram impact. Every command begins with a +//| command byte followed by a byte to determine the parameter count and if a delay is need after. +//| When the top bit of the second byte is 1, the next byte will be the delay time in milliseconds. +//| The remaining 7 bits are the parameter count excluding any delay byte. The third through final +//| bytes are the remaining command parameters. The next byte will begin a new command definition. +//| Here is a portion of ILI9341 init code: +//| +//| .. code-block:: python +//| +//| init_sequence = (b"\xe1\x0f\x00\x0E\x14\x03\x11\x07\x31\xC1\x48\x08\x0F\x0C\x31\x36\x0F" # Set Gamma +//| b"\x11\x80\x78"# Exit Sleep then delay 0x78 (120ms) +//| b"\x29\x80\x78"# Display on then delay 0x78 (120ms) +//| ) +//| display = displayio.Display(display_bus, init_sequence, width=320, height=240) +//| +//| The first command is 0xe1 with 15 (0xf) parameters following. The second and third are 0x11 and +//| 0x29 respectively with delays (0x80) of 120ms (0x78) and no parameters. Multiple byte literals +//| (b"") are merged together on load. The parens are needed to allow byte literals on subsequent +//| lines. +//| +//| The initialization sequence should always leave the display memory access inline with the scan +//| of the display to minimize tearing artifacts. +//| +//| :param display_bus: The bus that the display is connected to +//| :type display_bus: displayio.FourWire or displayio.ParallelBus +//| :param buffer init_sequence: Byte-packed initialization sequence. +//| :param int width: Width in pixels +//| :param int height: Height in pixels +//| :param int colstart: The index if the first visible column +//| :param int rowstart: The index if the first visible row +//| :param int rotation: The rotation of the display in degrees clockwise. Must be in 90 degree increments (0, 90, 180, 270) +//| :param int color_depth: The number of bits of color per pixel transmitted. (Some displays +//| support 18 bit but 16 is easier to transmit. The last bit is extrapolated.) +//| :param bool grayscale: True if the display only shows a single color. +//| :param bool pixels_in_byte_share_row: True when pixels are less than a byte and a byte includes pixels from the same row of the display. When False, pixels share a column. +//| :param int bytes_per_cell: Number of bytes per addressable memory location when color_depth < 8. When greater than one, bytes share a row or column according to pixels_in_byte_share_row. +//| :param bool reverse_pixels_in_byte: Reverses the pixel order within each byte when color_depth < 8. Does not apply across multiple bytes even if there is more than one byte per cell (bytes_per_cell.) +//| :param bool reverse_bytes_in_word: Reverses the order of bytes within a word when color_depth == 16 +//| :param int set_column_command: Command used to set the start and end columns to update +//| :param int set_row_command: Command used so set the start and end rows to update +//| :param int write_ram_command: Command used to write pixels values into the update region. Ignored if data_as_commands is set. +//| :param int set_vertical_scroll: Command used to set the first row to show +//| :param microcontroller.Pin backlight_pin: Pin connected to the display's backlight +//| :param int brightness_command: Command to set display brightness. Usually available in OLED controllers. +//| :param bool brightness: Initial display brightness. This value is ignored if auto_brightness is True. +//| :param bool auto_brightness: If True, brightness is controlled via an ambient light sensor or other mechanism. +//| :param bool single_byte_bounds: Display column and row commands use single bytes +//| :param bool data_as_commands: Treat all init and boundary data as SPI commands. Certain displays require this. +//| :param bool auto_refresh: Automatically refresh the screen +//| :param int native_frames_per_second: Number of display refreshes per second that occur with the given init_sequence. +//| :param bool backlight_on_high: If True, pulling the backlight pin high turns the backlight on.""" +//| ... //| STATIC mp_obj_t displayio_display_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_display_bus, ARG_init_sequence, ARG_width, ARG_height, ARG_colstart, ARG_rowstart, ARG_rotation, ARG_color_depth, ARG_grayscale, ARG_pixels_in_byte_share_row, ARG_bytes_per_cell, ARG_reverse_pixels_in_byte, ARG_reverse_bytes_in_word, ARG_set_column_command, ARG_set_row_command, ARG_write_ram_command, ARG_set_vertical_scroll, ARG_backlight_pin, ARG_brightness_command, ARG_brightness, ARG_auto_brightness, ARG_single_byte_bounds, ARG_data_as_commands, ARG_auto_refresh, ARG_native_frames_per_second, ARG_backlight_on_high }; @@ -190,12 +191,13 @@ static displayio_display_obj_t* native_display(mp_obj_t display_obj) { return MP_OBJ_TO_PTR(native_display); } -//| .. method:: show(group) +//| def show(self, group: Group) -> Any: +//| """Switches to displaying the given group of layers. When group is None, the default +//| CircuitPython terminal will be shown. //| -//| Switches to displaying the given group of layers. When group is None, the default -//| CircuitPython terminal will be shown. +//| :param Group group: The group to show.""" +//| ... //| -//| :param Group group: The group to show. STATIC mp_obj_t displayio_display_obj_show(mp_obj_t self_in, mp_obj_t group_in) { displayio_display_obj_t *self = native_display(self_in); displayio_group_t* group = NULL; @@ -211,21 +213,21 @@ STATIC mp_obj_t displayio_display_obj_show(mp_obj_t self_in, mp_obj_t group_in) } MP_DEFINE_CONST_FUN_OBJ_2(displayio_display_show_obj, displayio_display_obj_show); -//| .. method:: refresh(*, target_frames_per_second=60, minimum_frames_per_second=1) -//| -//| When auto refresh is off, waits for the target frame rate and then refreshes the display, -//| returning True. If the call has taken too long since the last refresh call for the given -//| target frame rate, then the refresh returns False immediately without updating the screen to -//| hopefully help getting caught up. +//| def refresh(self, *, target_frames_per_second: int = 60, minimum_frames_per_second: int = 1) -> Any: +//| """When auto refresh is off, waits for the target frame rate and then refreshes the display, +//| returning True. If the call has taken too long since the last refresh call for the given +//| target frame rate, then the refresh returns False immediately without updating the screen to +//| hopefully help getting caught up. //| -//| If the time since the last successful refresh is below the minimum frame rate, then an -//| exception will be raised. Set minimum_frames_per_second to 0 to disable. +//| If the time since the last successful refresh is below the minimum frame rate, then an +//| exception will be raised. Set minimum_frames_per_second to 0 to disable. //| -//| When auto refresh is on, updates the display immediately. (The display will also update -//| without calls to this.) +//| When auto refresh is on, updates the display immediately. (The display will also update +//| without calls to this.) //| -//| :param int target_frames_per_second: How many times a second `refresh` should be called and the screen updated. -//| :param int minimum_frames_per_second: The minimum number of times the screen should be updated per second. +//| :param int target_frames_per_second: How many times a second `refresh` should be called and the screen updated. +//| :param int minimum_frames_per_second: The minimum number of times the screen should be updated per second.""" +//| ... //| STATIC mp_obj_t displayio_display_obj_refresh(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_target_frames_per_second, ARG_minimum_frames_per_second }; @@ -246,9 +248,8 @@ STATIC mp_obj_t displayio_display_obj_refresh(size_t n_args, const mp_obj_t *pos } MP_DEFINE_CONST_FUN_OBJ_KW(displayio_display_refresh_obj, 1, displayio_display_obj_refresh); -//| .. attribute:: auto_refresh -//| -//| True when the display is refreshed automatically. +//| auto_refresh: Any = ... +//| """True when the display is refreshed automatically.""" //| STATIC mp_obj_t displayio_display_obj_get_auto_refresh(mp_obj_t self_in) { displayio_display_obj_t *self = native_display(self_in); @@ -272,11 +273,10 @@ const mp_obj_property_t displayio_display_auto_refresh_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: brightness -//| -//| The brightness of the display as a float. 0.0 is off and 1.0 is full brightness. When +//| brightness: Any = ... +//| """The brightness of the display as a float. 0.0 is off and 1.0 is full brightness. When //| `auto_brightness` is True, the value of `brightness` will change automatically. -//| If `brightness` is set, `auto_brightness` will be disabled and will be set to False. +//| If `brightness` is set, `auto_brightness` will be disabled and will be set to False.""" //| STATIC mp_obj_t displayio_display_obj_get_brightness(mp_obj_t self_in) { displayio_display_obj_t *self = native_display(self_in); @@ -310,12 +310,11 @@ const mp_obj_property_t displayio_display_brightness_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: auto_brightness -//| -//| True when the display brightness is adjusted automatically, based on an ambient +//| auto_brightness: Any = ... +//| """True when the display brightness is adjusted automatically, based on an ambient //| light sensor or other method. Note that some displays may have this set to True by default, //| but not actually implement automatic brightness adjustment. `auto_brightness` is set to False -//| if `brightness` is set manually. +//| if `brightness` is set manually.""" //| STATIC mp_obj_t displayio_display_obj_get_auto_brightness(mp_obj_t self_in) { displayio_display_obj_t *self = native_display(self_in); @@ -342,9 +341,8 @@ const mp_obj_property_t displayio_display_auto_brightness_obj = { -//| .. attribute:: width -//| -//| Gets the width of the board +//| width: Any = ... +//| Gets the width of the board //| //| STATIC mp_obj_t displayio_display_obj_get_width(mp_obj_t self_in) { @@ -360,9 +358,8 @@ const mp_obj_property_t displayio_display_width_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: height -//| -//| Gets the height of the board +//| height: Any = ... +//| """Gets the height of the board""" //| //| STATIC mp_obj_t displayio_display_obj_get_height(mp_obj_t self_in) { @@ -378,9 +375,8 @@ const mp_obj_property_t displayio_display_height_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: rotation -//| -//| The rotation of the display as an int in degrees. +//| rotation: Any = ... +//| """The rotation of the display as an int in degrees.""" //| STATIC mp_obj_t displayio_display_obj_get_rotation(mp_obj_t self_in) { displayio_display_obj_t *self = native_display(self_in); @@ -402,9 +398,8 @@ const mp_obj_property_t displayio_display_rotation_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: bus -//| -//| The bus being used by the display +//| bus: Any = ... +//| """The bus being used by the display""" //| //| STATIC mp_obj_t displayio_display_obj_get_bus(mp_obj_t self_in) { @@ -421,12 +416,13 @@ const mp_obj_property_t displayio_display_bus_obj = { }; -//| .. method:: fill_row(y, buffer) +//| def fill_row(self, y: int, buffer: bytearray) -> Any: +//| """Extract the pixels from a single row //| -//| Extract the pixels from a single row +//| :param int y: The top edge of the area +//| :param bytearray buffer: The buffer in which to place the pixel data""" +//| ... //| -//| :param int y: The top edge of the area -//| :param bytearray buffer: The buffer in which to place the pixel data STATIC mp_obj_t displayio_display_obj_fill_row(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_y, ARG_buffer }; static const mp_arg_t allowed_args[] = { diff --git a/shared-bindings/displayio/EPaperDisplay.c b/shared-bindings/displayio/EPaperDisplay.c index 1459c1680..8b03ddc06 100644 --- a/shared-bindings/displayio/EPaperDisplay.c +++ b/shared-bindings/displayio/EPaperDisplay.c @@ -39,55 +39,56 @@ #include "shared-module/displayio/__init__.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: displayio +//| class EPaperDisplay: +//| """.. currentmodule:: displayio //| -//| :class:`EPaperDisplay` -- Manage updating an epaper display over a display bus -//| ============================================================================== +//| :class:`EPaperDisplay` -- Manage updating an epaper display over a display bus +//| ============================================================================== //| -//| This initializes an epaper display and connects it into CircuitPython. Unlike other -//| objects in CircuitPython, EPaperDisplay objects live until `displayio.release_displays()` -//| is called. This is done so that CircuitPython can use the display itself. +//| This initializes an epaper display and connects it into CircuitPython. Unlike other +//| objects in CircuitPython, EPaperDisplay objects live until `displayio.release_displays()` +//| is called. This is done so that CircuitPython can use the display itself. //| -//| Most people should not use this class directly. Use a specific display driver instead that will -//| contain the startup and shutdown sequences at minimum. +//| Most people should not use this class directly. Use a specific display driver instead that will +//| contain the startup and shutdown sequences at minimum.""" //| -//| .. class:: EPaperDisplay(display_bus, start_sequence, stop_sequence, *, width, height, ram_width, ram_height, colstart=0, rowstart=0, rotation=0, set_column_window_command=None, set_row_window_command=None, single_byte_bounds=False, write_black_ram_command, black_bits_inverted=False, write_color_ram_command=None, color_bits_inverted=False, highlight_color=0x000000, refresh_display_command, refresh_time=40, busy_pin=None, busy_state=True, seconds_per_frame=180, always_toggle_chip_select=False) +//| def __init__(self, display_bus: Any, start_sequence: buffer, stop_sequence: buffer, *, width: int, height: int, ram_width: int, ram_height: int, colstart: int = 0, rowstart: int = 0, rotation: int = 0, set_column_window_command: int = None, set_row_window_command: int = None, single_byte_bounds: Any = False, write_black_ram_command: int, black_bits_inverted: bool = False, write_color_ram_command: int = None, color_bits_inverted: bool = False, highlight_color: int = 0x000000, refresh_display_command: int, refresh_time: float = 40, busy_pin: microcontroller.Pin = None, busy_state: bool = True, seconds_per_frame: float = 180, always_toggle_chip_select: bool = False): +//| """Create a EPaperDisplay object on the given display bus (`displayio.FourWire` or `displayio.ParallelBus`). //| -//| Create a EPaperDisplay object on the given display bus (`displayio.FourWire` or `displayio.ParallelBus`). +//| The ``start_sequence`` and ``stop_sequence`` are bitpacked to minimize the ram impact. Every +//| command begins with a command byte followed by a byte to determine the parameter count and if +//| a delay is need after. When the top bit of the second byte is 1, the next byte will be the +//| delay time in milliseconds. The remaining 7 bits are the parameter count excluding any delay +//| byte. The third through final bytes are the remaining command parameters. The next byte will +//| begin a new command definition. //| -//| The ``start_sequence`` and ``stop_sequence`` are bitpacked to minimize the ram impact. Every -//| command begins with a command byte followed by a byte to determine the parameter count and if -//| a delay is need after. When the top bit of the second byte is 1, the next byte will be the -//| delay time in milliseconds. The remaining 7 bits are the parameter count excluding any delay -//| byte. The third through final bytes are the remaining command parameters. The next byte will -//| begin a new command definition. -//| -//| :param display_bus: The bus that the display is connected to -//| :type display_bus: displayio.FourWire or displayio.ParallelBus -//| :param buffer start_sequence: Byte-packed initialization sequence. -//| :param buffer stop_sequence: Byte-packed initialization sequence. -//| :param int width: Width in pixels -//| :param int height: Height in pixels -//| :param int ram_width: RAM width in pixels -//| :param int ram_height: RAM height in pixels -//| :param int colstart: The index if the first visible column -//| :param int rowstart: The index if the first visible row -//| :param int rotation: The rotation of the display in degrees clockwise. Must be in 90 degree increments (0, 90, 180, 270) -//| :param int set_column_window_command: Command used to set the start and end columns to update -//| :param int set_row_window_command: Command used so set the start and end rows to update -//| :param int set_current_column_command: Command used to set the current column location -//| :param int set_current_row_command: Command used to set the current row location -//| :param int write_black_ram_command: Command used to write pixels values into the update region -//| :param bool black_bits_inverted: True if 0 bits are used to show black pixels. Otherwise, 1 means to show black. -//| :param int write_color_ram_command: Command used to write pixels values into the update region -//| :param bool color_bits_inverted: True if 0 bits are used to show the color. Otherwise, 1 means to show color. -//| :param int highlight_color: RGB888 of source color to highlight with third ePaper color. -//| :param int refresh_display_command: Command used to start a display refresh -//| :param float refresh_time: Time it takes to refresh the display before the stop_sequence should be sent. Ignored when busy_pin is provided. -//| :param microcontroller.Pin busy_pin: Pin used to signify the display is busy -//| :param bool busy_state: State of the busy pin when the display is busy -//| :param float seconds_per_frame: Minimum number of seconds between screen refreshes -//| :param bool always_toggle_chip_select: When True, chip select is toggled every byte +//| :param display_bus: The bus that the display is connected to +//| :type display_bus: displayio.FourWire or displayio.ParallelBus +//| :param buffer start_sequence: Byte-packed initialization sequence. +//| :param buffer stop_sequence: Byte-packed initialization sequence. +//| :param int width: Width in pixels +//| :param int height: Height in pixels +//| :param int ram_width: RAM width in pixels +//| :param int ram_height: RAM height in pixels +//| :param int colstart: The index if the first visible column +//| :param int rowstart: The index if the first visible row +//| :param int rotation: The rotation of the display in degrees clockwise. Must be in 90 degree increments (0, 90, 180, 270) +//| :param int set_column_window_command: Command used to set the start and end columns to update +//| :param int set_row_window_command: Command used so set the start and end rows to update +//| :param int set_current_column_command: Command used to set the current column location +//| :param int set_current_row_command: Command used to set the current row location +//| :param int write_black_ram_command: Command used to write pixels values into the update region +//| :param bool black_bits_inverted: True if 0 bits are used to show black pixels. Otherwise, 1 means to show black. +//| :param int write_color_ram_command: Command used to write pixels values into the update region +//| :param bool color_bits_inverted: True if 0 bits are used to show the color. Otherwise, 1 means to show color. +//| :param int highlight_color: RGB888 of source color to highlight with third ePaper color. +//| :param int refresh_display_command: Command used to start a display refresh +//| :param float refresh_time: Time it takes to refresh the display before the stop_sequence should be sent. Ignored when busy_pin is provided. +//| :param microcontroller.Pin busy_pin: Pin used to signify the display is busy +//| :param bool busy_state: State of the busy pin when the display is busy +//| :param float seconds_per_frame: Minimum number of seconds between screen refreshes +//| :param bool always_toggle_chip_select: When True, chip select is toggled every byte""" +//| ... //| STATIC mp_obj_t displayio_epaperdisplay_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_display_bus, ARG_start_sequence, ARG_stop_sequence, ARG_width, ARG_height, ARG_ram_width, ARG_ram_height, ARG_colstart, ARG_rowstart, ARG_rotation, ARG_set_column_window_command, ARG_set_row_window_command, ARG_set_current_column_command, ARG_set_current_row_command, ARG_write_black_ram_command, ARG_black_bits_inverted, ARG_write_color_ram_command, ARG_color_bits_inverted, ARG_highlight_color, ARG_refresh_display_command, ARG_refresh_time, ARG_busy_pin, ARG_busy_state, ARG_seconds_per_frame, ARG_always_toggle_chip_select }; @@ -170,12 +171,13 @@ static displayio_epaperdisplay_obj_t* native_display(mp_obj_t display_obj) { return MP_OBJ_TO_PTR(native_display); } -//| .. method:: show(group) +//| def show(self, group: Group) -> Any: +//| """Switches to displaying the given group of layers. When group is None, the default +//| CircuitPython terminal will be shown. //| -//| Switches to displaying the given group of layers. When group is None, the default -//| CircuitPython terminal will be shown. +//| :param Group group: The group to show.""" +//| ... //| -//| :param Group group: The group to show. STATIC mp_obj_t displayio_epaperdisplay_obj_show(mp_obj_t self_in, mp_obj_t group_in) { displayio_epaperdisplay_obj_t *self = native_display(self_in); displayio_group_t* group = NULL; @@ -191,10 +193,10 @@ STATIC mp_obj_t displayio_epaperdisplay_obj_show(mp_obj_t self_in, mp_obj_t grou } MP_DEFINE_CONST_FUN_OBJ_2(displayio_epaperdisplay_show_obj, displayio_epaperdisplay_obj_show); -//| .. method:: refresh() -//| -//| Refreshes the display immediately or raises an exception if too soon. Use -//| ``time.sleep(display.time_to_refresh)`` to sleep until a refresh can occur. +//| def refresh(self, ) -> Any: +//| """Refreshes the display immediately or raises an exception if too soon. Use +//| ``time.sleep(display.time_to_refresh)`` to sleep until a refresh can occur.""" +//| ... //| STATIC mp_obj_t displayio_epaperdisplay_obj_refresh(mp_obj_t self_in) { displayio_epaperdisplay_obj_t *self = native_display(self_in); @@ -206,10 +208,8 @@ STATIC mp_obj_t displayio_epaperdisplay_obj_refresh(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(displayio_epaperdisplay_refresh_obj, displayio_epaperdisplay_obj_refresh); -//| .. attribute:: time_to_refresh -//| -//| Time, in fractional seconds, until the ePaper display can be refreshed. -//| +//| time_to_refresh: Any = ... +//| """Time, in fractional seconds, until the ePaper display can be refreshed.""" //| STATIC mp_obj_t displayio_epaperdisplay_obj_get_time_to_refresh(mp_obj_t self_in) { displayio_epaperdisplay_obj_t *self = native_display(self_in); @@ -224,10 +224,8 @@ const mp_obj_property_t displayio_epaperdisplay_time_to_refresh_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: width -//| -//| Gets the width of the display in pixels -//| +//| width: Any = ... +//| """Gets the width of the display in pixels""" //| STATIC mp_obj_t displayio_epaperdisplay_obj_get_width(mp_obj_t self_in) { displayio_epaperdisplay_obj_t *self = native_display(self_in); @@ -242,10 +240,8 @@ const mp_obj_property_t displayio_epaperdisplay_width_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: height -//| -//| Gets the height of the display in pixels -//| +//| height: Any = ... +//| """Gets the height of the display in pixels""" //| STATIC mp_obj_t displayio_epaperdisplay_obj_get_height(mp_obj_t self_in) { displayio_epaperdisplay_obj_t *self = native_display(self_in); @@ -260,10 +256,8 @@ const mp_obj_property_t displayio_epaperdisplay_height_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: bus -//| -//| The bus being used by the display -//| +//| bus: Any = ... +//| """The bus being used by the display""" //| STATIC mp_obj_t displayio_epaperdisplay_obj_get_bus(mp_obj_t self_in) { displayio_epaperdisplay_obj_t *self = native_display(self_in); diff --git a/shared-bindings/displayio/FourWire.c b/shared-bindings/displayio/FourWire.c index 6ad162411..649045039 100644 --- a/shared-bindings/displayio/FourWire.c +++ b/shared-bindings/displayio/FourWire.c @@ -38,31 +38,32 @@ #include "shared-module/displayio/__init__.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: displayio +//| class FourWire: +//| """.. currentmodule:: displayio //| -//| :class:`FourWire` -- Manage updating a display over SPI four wire protocol -//| ========================================================================== +//| :class:`FourWire` -- Manage updating a display over SPI four wire protocol +//| ========================================================================== //| -//| Manage updating a display over SPI four wire protocol in the background while Python code runs. -//| It doesn't handle display initialization. +//| Manage updating a display over SPI four wire protocol in the background while Python code runs. +//| It doesn't handle display initialization.""" //| -//| .. class:: FourWire(spi_bus, *, command, chip_select, reset=None, baudrate=24000000, polarity=0, phase=0) +//| def __init__(self, spi_bus: busio.SPI, *, command: microcontroller.Pin, chip_select: microcontroller.Pin, reset: microcontroller.Pin = None, baudrate: int = 24000000, polarity: int = 0, phase: int = 0): +//| """Create a FourWire object associated with the given pins. //| -//| Create a FourWire object associated with the given pins. +//| The SPI bus and pins are then in use by the display until `displayio.release_displays()` is +//| called even after a reload. (It does this so CircuitPython can use the display after your code +//| is done.) So, the first time you initialize a display bus in code.py you should call +//| :py:func`displayio.release_displays` first, otherwise it will error after the first code.py run. //| -//| The SPI bus and pins are then in use by the display until `displayio.release_displays()` is -//| called even after a reload. (It does this so CircuitPython can use the display after your code -//| is done.) So, the first time you initialize a display bus in code.py you should call -//| :py:func`displayio.release_displays` first, otherwise it will error after the first code.py run. -//| -//| :param busio.SPI spi_bus: The SPI bus that make up the clock and data lines -//| :param microcontroller.Pin command: Data or command pin -//| :param microcontroller.Pin chip_select: Chip select pin -//| :param microcontroller.Pin reset: Reset pin. When None only software reset can be used -//| :param int baudrate: Maximum baudrate in Hz for the display on the bus -//| :param int polarity: the base state of the clock line (0 or 1) -//| :param int phase: the edge of the clock that data is captured. First (0) -//| or second (1). Rising or falling depends on clock polarity. +//| :param busio.SPI spi_bus: The SPI bus that make up the clock and data lines +//| :param microcontroller.Pin command: Data or command pin +//| :param microcontroller.Pin chip_select: Chip select pin +//| :param microcontroller.Pin reset: Reset pin. When None only software reset can be used +//| :param int baudrate: Maximum baudrate in Hz for the display on the bus +//| :param int polarity: the base state of the clock line (0 or 1) +//| :param int phase: the edge of the clock that data is captured. First (0) +//| or second (1). Rising or falling depends on clock polarity.""" +//| ... //| STATIC mp_obj_t displayio_fourwire_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_spi_bus, ARG_command, ARG_chip_select, ARG_reset, ARG_baudrate, ARG_polarity, ARG_phase }; @@ -100,10 +101,10 @@ STATIC mp_obj_t displayio_fourwire_make_new(const mp_obj_type_t *type, size_t n_ return self; } -//| .. method:: reset() -//| -//| Performs a hardware reset via the reset pin. Raises an exception if called when no reset pin -//| is available. +//| def reset(self, ) -> Any: +//| """Performs a hardware reset via the reset pin. Raises an exception if called when no reset pin +//| is available.""" +//| ... //| STATIC mp_obj_t displayio_fourwire_obj_reset(mp_obj_t self_in) { displayio_fourwire_obj_t *self = self_in; @@ -115,10 +116,10 @@ STATIC mp_obj_t displayio_fourwire_obj_reset(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(displayio_fourwire_reset_obj, displayio_fourwire_obj_reset); -//| .. method:: send(command, data, *, toggle_every_byte=False) -//| -//| Sends the given command value followed by the full set of data. Display state, such as -//| vertical scroll, set via ``send`` may or may not be reset once the code is done. +//| def send(self, command: Any, data: Any, *, toggle_every_byte: Any = False) -> Any: +//| """Sends the given command value followed by the full set of data. Display state, such as +//| vertical scroll, set via ``send`` may or may not be reset once the code is done.""" +//| ... //| STATIC mp_obj_t displayio_fourwire_obj_send(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_command, ARG_data, ARG_toggle_every_byte }; diff --git a/shared-bindings/displayio/Group.c b/shared-bindings/displayio/Group.c index dd7600eb9..36e137dc9 100644 --- a/shared-bindings/displayio/Group.c +++ b/shared-bindings/displayio/Group.c @@ -35,22 +35,23 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: displayio +//| class Group: +//| """.. currentmodule:: displayio //| -//| :class:`Group` -- Group together sprites and subgroups -//| ========================================================================== +//| :class:`Group` -- Group together sprites and subgroups +//| ========================================================================== //| -//| Manage a group of sprites and groups and how they are inter-related. +//| Manage a group of sprites and groups and how they are inter-related.""" //| -//| .. class:: Group(*, max_size=4, scale=1, x=0, y=0) +//| def __init__(self, *, max_size: int = 4, scale: int = 1, x: int = 0, y: int = 0): +//| """Create a Group of a given size and scale. Scale is in one dimension. For example, scale=2 +//| leads to a layer's pixel being 2x2 pixels when in the group. //| -//| Create a Group of a given size and scale. Scale is in one dimension. For example, scale=2 -//| leads to a layer's pixel being 2x2 pixels when in the group. -//| -//| :param int max_size: The maximum group size. -//| :param int scale: Scale of layer pixels in one dimension. -//| :param int x: Initial x position within the parent. -//| :param int y: Initial y position within the parent. +//| :param int max_size: The maximum group size. +//| :param int scale: Scale of layer pixels in one dimension. +//| :param int x: Initial x position within the parent. +//| :param int y: Initial y position within the parent.""" +//| ... //| STATIC mp_obj_t displayio_group_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_max_size, ARG_scale, ARG_x, ARG_y }; @@ -90,10 +91,9 @@ displayio_group_t* native_group(mp_obj_t group_obj) { return MP_OBJ_TO_PTR(native_group); } -//| .. attribute:: hidden -//| -//| True when the Group and all of it's layers are not visible. When False, the Group's layers -//| are visible if they haven't been hidden. +//| hidden: Any = ... +//| """True when the Group and all of it's layers are not visible. When False, the Group's layers +//| are visible if they haven't been hidden.""" //| STATIC mp_obj_t displayio_group_obj_get_hidden(mp_obj_t self_in) { displayio_group_t *self = native_group(self_in); @@ -116,10 +116,9 @@ const mp_obj_property_t displayio_group_hidden_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: scale -//| -//| Scales each pixel within the Group in both directions. For example, when scale=2 each pixel -//| will be represented by 2x2 pixels. +//| scale: Any = ... +//| """Scales each pixel within the Group in both directions. For example, when scale=2 each pixel +//| will be represented by 2x2 pixels.""" //| STATIC mp_obj_t displayio_group_obj_get_scale(mp_obj_t self_in) { displayio_group_t *self = native_group(self_in); @@ -146,9 +145,8 @@ const mp_obj_property_t displayio_group_scale_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: x -//| -//| X position of the Group in the parent. +//| x: Any = ... +//| """X position of the Group in the parent.""" //| STATIC mp_obj_t displayio_group_obj_get_x(mp_obj_t self_in) { displayio_group_t *self = native_group(self_in); @@ -172,9 +170,8 @@ const mp_obj_property_t displayio_group_x_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: y -//| -//| Y position of the Group in the parent. +//| y: Any = ... +//| """Y position of the Group in the parent.""" //| STATIC mp_obj_t displayio_group_obj_get_y(mp_obj_t self_in) { displayio_group_t *self = native_group(self_in); @@ -198,9 +195,9 @@ const mp_obj_property_t displayio_group_y_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: append(layer) -//| -//| Append a layer to the group. It will be drawn above other layers. +//| def append(self, layer: Any) -> Any: +//| """Append a layer to the group. It will be drawn above other layers.""" +//| ... //| STATIC mp_obj_t displayio_group_obj_append(mp_obj_t self_in, mp_obj_t layer) { displayio_group_t *self = native_group(self_in); @@ -209,9 +206,9 @@ STATIC mp_obj_t displayio_group_obj_append(mp_obj_t self_in, mp_obj_t layer) { } MP_DEFINE_CONST_FUN_OBJ_2(displayio_group_append_obj, displayio_group_obj_append); -//| .. method:: insert(index, layer) -//| -//| Insert a layer into the group. +//| def insert(self, index: Any, layer: Any) -> Any: +//| """Insert a layer into the group.""" +//| ... //| STATIC mp_obj_t displayio_group_obj_insert(mp_obj_t self_in, mp_obj_t index_obj, mp_obj_t layer) { displayio_group_t *self = native_group(self_in); @@ -222,9 +219,9 @@ STATIC mp_obj_t displayio_group_obj_insert(mp_obj_t self_in, mp_obj_t index_obj, MP_DEFINE_CONST_FUN_OBJ_3(displayio_group_insert_obj, displayio_group_obj_insert); -//| .. method:: index(layer) -//| -//| Returns the index of the first copy of layer. Raises ValueError if not found. +//| def index(self, layer: Any) -> Any: +//| """Returns the index of the first copy of layer. Raises ValueError if not found.""" +//| ... //| STATIC mp_obj_t displayio_group_obj_index(mp_obj_t self_in, mp_obj_t layer) { displayio_group_t *self = native_group(self_in); @@ -236,9 +233,9 @@ STATIC mp_obj_t displayio_group_obj_index(mp_obj_t self_in, mp_obj_t layer) { } MP_DEFINE_CONST_FUN_OBJ_2(displayio_group_index_obj, displayio_group_obj_index); -//| .. method:: pop(i=-1) -//| -//| Remove the ith item and return it. +//| def pop(self, i: Any = -1) -> Any: +//| """Remove the ith item and return it.""" +//| ... //| STATIC mp_obj_t displayio_group_obj_pop(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_i }; @@ -259,9 +256,9 @@ STATIC mp_obj_t displayio_group_obj_pop(size_t n_args, const mp_obj_t *pos_args, MP_DEFINE_CONST_FUN_OBJ_KW(displayio_group_pop_obj, 1, displayio_group_obj_pop); -//| .. method:: remove(layer) -//| -//| Remove the first copy of layer. Raises ValueError if it is not present. +//| def remove(self, layer: Any) -> Any: +//| """Remove the first copy of layer. Raises ValueError if it is not present.""" +//| ... //| STATIC mp_obj_t displayio_group_obj_remove(mp_obj_t self_in, mp_obj_t layer) { mp_obj_t index = displayio_group_obj_index(self_in, layer); @@ -272,9 +269,9 @@ STATIC mp_obj_t displayio_group_obj_remove(mp_obj_t self_in, mp_obj_t layer) { } MP_DEFINE_CONST_FUN_OBJ_2(displayio_group_remove_obj, displayio_group_obj_remove); -//| .. method:: __len__() -//| -//| Returns the number of layers in a Group +//| def __len__(self, ) -> Any: +//| """Returns the number of layers in a Group""" +//| ... //| STATIC mp_obj_t group_unary_op(mp_unary_op_t op, mp_obj_t self_in) { displayio_group_t *self = native_group(self_in); @@ -286,29 +283,29 @@ STATIC mp_obj_t group_unary_op(mp_unary_op_t op, mp_obj_t self_in) { } } -//| .. method:: __getitem__(index) -//| -//| Returns the value at the given index. -//| -//| This allows you to:: -//| -//| print(group[0]) +//| def __getitem__(self, index: Any) -> Any: +//| """Returns the value at the given index. //| -//| .. method:: __setitem__(index, value) +//| This allows you to:: //| -//| Sets the value at the given index. +//| print(group[0])""" +//| ... //| -//| This allows you to:: +//| def __setitem__(self, index: Any, value: Any) -> Any: +//| """Sets the value at the given index. //| -//| group[0] = sprite +//| This allows you to:: //| -//| .. method:: __delitem__(index) +//| group[0] = sprite""" +//| ... //| -//| Deletes the value at the given index. +//| def __delitem__(self, index: Any) -> Any: +//| """Deletes the value at the given index. //| -//| This allows you to:: +//| This allows you to:: //| -//| del group[0] +//| del group[0]""" +//| ... //| STATIC mp_obj_t group_subscr(mp_obj_t self_in, mp_obj_t index_obj, mp_obj_t value) { displayio_group_t *self = native_group(self_in); diff --git a/shared-bindings/displayio/I2CDisplay.c b/shared-bindings/displayio/I2CDisplay.c index 963e8377c..e2402dc49 100644 --- a/shared-bindings/displayio/I2CDisplay.c +++ b/shared-bindings/displayio/I2CDisplay.c @@ -38,26 +38,27 @@ #include "shared-module/displayio/__init__.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: displayio +//| class I2CDisplay: +//| """.. currentmodule:: displayio //| -//| :class:`I2CDisplay` -- Manage updating a display over I2C -//| ========================================================================== +//| :class:`I2CDisplay` -- Manage updating a display over I2C +//| ========================================================================== //| -//| Manage updating a display over I2C in the background while Python code runs. -//| It doesn't handle display initialization. +//| Manage updating a display over I2C in the background while Python code runs. +//| It doesn't handle display initialization.""" //| -//| .. class:: I2CDisplay(i2c_bus, *, device_address, reset=None) +//| def __init__(self, i2c_bus: busio.I2C, *, device_address: int, reset: microcontroller.Pin = None): +//| """Create a I2CDisplay object associated with the given I2C bus and reset pin. //| -//| Create a I2CDisplay object associated with the given I2C bus and reset pin. +//| The I2C bus and pins are then in use by the display until `displayio.release_displays()` is +//| called even after a reload. (It does this so CircuitPython can use the display after your code +//| is done.) So, the first time you initialize a display bus in code.py you should call +//| :py:func`displayio.release_displays` first, otherwise it will error after the first code.py run. //| -//| The I2C bus and pins are then in use by the display until `displayio.release_displays()` is -//| called even after a reload. (It does this so CircuitPython can use the display after your code -//| is done.) So, the first time you initialize a display bus in code.py you should call -//| :py:func`displayio.release_displays` first, otherwise it will error after the first code.py run. -//| -//| :param busio.I2C i2c_bus: The I2C bus that make up the clock and data lines -//| :param int device_address: The I2C address of the device -//| :param microcontroller.Pin reset: Reset pin. When None only software reset can be used +//| :param busio.I2C i2c_bus: The I2C bus that make up the clock and data lines +//| :param int device_address: The I2C address of the device +//| :param microcontroller.Pin reset: Reset pin. When None only software reset can be used""" +//| ... //| STATIC mp_obj_t displayio_i2cdisplay_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_i2c_bus, ARG_device_address, ARG_reset }; @@ -80,10 +81,10 @@ STATIC mp_obj_t displayio_i2cdisplay_make_new(const mp_obj_type_t *type, size_t return self; } -//| .. method:: reset() -//| -//| Performs a hardware reset via the reset pin. Raises an exception if called when no reset pin -//| is available. +//| def reset(self, ) -> Any: +//| """Performs a hardware reset via the reset pin. Raises an exception if called when no reset pin +//| is available.""" +//| ... //| STATIC mp_obj_t displayio_i2cdisplay_obj_reset(mp_obj_t self_in) { displayio_i2cdisplay_obj_t *self = self_in; @@ -95,10 +96,10 @@ STATIC mp_obj_t displayio_i2cdisplay_obj_reset(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(displayio_i2cdisplay_reset_obj, displayio_i2cdisplay_obj_reset); -//| .. method:: send(command, data) -//| -//| Sends the given command value followed by the full set of data. Display state, such as -//| vertical scroll, set via ``send`` may or may not be reset once the code is done. +//| def send(self, command: Any, data: Any) -> Any: +//| """Sends the given command value followed by the full set of data. Display state, such as +//| vertical scroll, set via ``send`` may or may not be reset once the code is done.""" +//| ... //| STATIC mp_obj_t displayio_i2cdisplay_obj_send(mp_obj_t self, mp_obj_t command_obj, mp_obj_t data_obj) { mp_int_t command_int = MP_OBJ_SMALL_INT_VALUE(command_obj); diff --git a/shared-bindings/displayio/OnDiskBitmap.c b/shared-bindings/displayio/OnDiskBitmap.c index 57179947e..95c890c3b 100644 --- a/shared-bindings/displayio/OnDiskBitmap.c +++ b/shared-bindings/displayio/OnDiskBitmap.c @@ -33,51 +33,52 @@ #include "supervisor/shared/translate.h" #include "shared-bindings/displayio/OnDiskBitmap.h" -//| .. currentmodule:: displayio +//| class OnDiskBitmap: +//| """.. currentmodule:: displayio //| -//| :class:`OnDiskBitmap` -- Loads pixels straight from disk -//| ========================================================================== +//| :class:`OnDiskBitmap` -- Loads pixels straight from disk +//| ========================================================================== //| -//| Loads values straight from disk. This minimizes memory use but can lead to -//| much slower pixel load times. These load times may result in frame tearing where only part of -//| the image is visible. +//| Loads values straight from disk. This minimizes memory use but can lead to +//| much slower pixel load times. These load times may result in frame tearing where only part of +//| the image is visible. //| -//| It's easiest to use on a board with a built in display such as the `Hallowing M0 Express -//| `_. +//| It's easiest to use on a board with a built in display such as the `Hallowing M0 Express +//| `_. //| -//| .. code-block:: Python +//| .. code-block:: Python //| -//| import board -//| import displayio -//| import time -//| import pulseio +//| import board +//| import displayio +//| import time +//| import pulseio //| -//| board.DISPLAY.auto_brightness = False -//| board.DISPLAY.brightness = 0 -//| splash = displayio.Group() -//| board.DISPLAY.show(splash) +//| board.DISPLAY.auto_brightness = False +//| board.DISPLAY.brightness = 0 +//| splash = displayio.Group() +//| board.DISPLAY.show(splash) //| -//| with open("/sample.bmp", "rb") as f: -//| odb = displayio.OnDiskBitmap(f) -//| face = displayio.TileGrid(odb, pixel_shader=displayio.ColorConverter()) -//| splash.append(face) -//| # Wait for the image to load. -//| board.DISPLAY.refresh(target_frames_per_second=60) +//| with open("/sample.bmp", "rb") as f: +//| odb = displayio.OnDiskBitmap(f) +//| face = displayio.TileGrid(odb, pixel_shader=displayio.ColorConverter()) +//| splash.append(face) +//| # Wait for the image to load. +//| board.DISPLAY.refresh(target_frames_per_second=60) //| -//| # Fade up the backlight -//| for i in range(100): -//| board.DISPLAY.brightness = 0.01 * i -//| time.sleep(0.05) +//| # Fade up the backlight +//| for i in range(100): +//| board.DISPLAY.brightness = 0.01 * i +//| time.sleep(0.05) //| -//| # Wait forever -//| while True: -//| pass +//| # Wait forever +//| while True: +//| pass""" //| -//| .. class:: OnDiskBitmap(file) +//| def __init__(self, file: file): +//| """Create an OnDiskBitmap object with the given file. //| -//| Create an OnDiskBitmap object with the given file. -//| -//| :param file file: The open bitmap file +//| :param file file: The open bitmap file""" +//| ... //| STATIC mp_obj_t displayio_ondiskbitmap_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 1, 1, false); @@ -93,9 +94,8 @@ STATIC mp_obj_t displayio_ondiskbitmap_make_new(const mp_obj_type_t *type, size_ return MP_OBJ_FROM_PTR(self); } -//| .. attribute:: width -//| -//| Width of the bitmap. (read only) +//| width: Any = ... +//| """Width of the bitmap. (read only)""" //| STATIC mp_obj_t displayio_ondiskbitmap_obj_get_width(mp_obj_t self_in) { displayio_ondiskbitmap_t *self = MP_OBJ_TO_PTR(self_in); @@ -113,9 +113,8 @@ const mp_obj_property_t displayio_ondiskbitmap_width_obj = { }; -//| .. attribute:: height -//| -//| Height of the bitmap. (read only) +//| height: Any = ... +//| """Height of the bitmap. (read only)""" //| STATIC mp_obj_t displayio_ondiskbitmap_obj_get_height(mp_obj_t self_in) { displayio_ondiskbitmap_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/displayio/Palette.c b/shared-bindings/displayio/Palette.c index 67a7db85b..5df11d2b1 100644 --- a/shared-bindings/displayio/Palette.c +++ b/shared-bindings/displayio/Palette.c @@ -36,19 +36,27 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: displayio + + + + + + +//| class Palette: +//| """.. currentmodule:: displayio //| -//| :class:`Palette` -- Stores a mapping from bitmap pixel palette_indexes to display colors -//| ========================================================================================= +//| :class:`Palette` -- Stores a mapping from bitmap pixel palette_indexes to display colors +//| ========================================================================================= //| -//| Map a pixel palette_index to a full color. Colors are transformed to the display's format internally to -//| save memory. +//| Map a pixel palette_index to a full color. Colors are transformed to the display's format internally to +//| save memory.""" //| -//| .. class:: Palette(color_count) +//| def __init__(self, color_count: int): +//| """Create a Palette object to store a set number of colors. //| -//| Create a Palette object to store a set number of colors. +//| :param int color_count: The number of colors in the Palette""" +//| ... //| -//| :param int color_count: The number of colors in the Palette // TODO(tannewt): Add support for other color formats. // TODO(tannewt): Add support for 8-bit alpha blending. //| @@ -67,9 +75,9 @@ STATIC mp_obj_t displayio_palette_make_new(const mp_obj_type_t *type, size_t n_a return MP_OBJ_FROM_PTR(self); } -//| .. method:: __len__() -//| -//| Returns the number of colors in a Palette +//| def __len__(self, ) -> Any: +//| """Returns the number of colors in a Palette""" +//| ... //| STATIC mp_obj_t group_unary_op(mp_unary_op_t op, mp_obj_t self_in) { displayio_palette_t *self = MP_OBJ_TO_PTR(self_in); @@ -81,21 +89,21 @@ STATIC mp_obj_t group_unary_op(mp_unary_op_t op, mp_obj_t self_in) { } } -//| .. method:: __setitem__(index, value) -//| -//| Sets the pixel color at the given index. The index should be an integer in the range 0 to color_count-1. +//| def __setitem__(self, index: Any, value: Any) -> Any: +//| """Sets the pixel color at the given index. The index should be an integer in the range 0 to color_count-1. //| -//| The value argument represents a color, and can be from 0x000000 to 0xFFFFFF (to represent an RGB value). -//| Value can be an int, bytes (3 bytes (RGB) or 4 bytes (RGB + pad byte)), bytearray, -//| or a tuple or list of 3 integers. +//| The value argument represents a color, and can be from 0x000000 to 0xFFFFFF (to represent an RGB value). +//| Value can be an int, bytes (3 bytes (RGB) or 4 bytes (RGB + pad byte)), bytearray, +//| or a tuple or list of 3 integers. //| -//| This allows you to:: +//| This allows you to:: //| -//| palette[0] = 0xFFFFFF # set using an integer -//| palette[1] = b'\xff\xff\x00' # set using 3 bytes -//| palette[2] = b'\xff\xff\x00\x00' # set using 4 bytes -//| palette[3] = bytearray(b'\x00\x00\xFF') # set using a bytearay of 3 or 4 bytes -//| palette[4] = (10, 20, 30) # set using a tuple of 3 integers +//| palette[0] = 0xFFFFFF # set using an integer +//| palette[1] = b'\xff\xff\x00' # set using 3 bytes +//| palette[2] = b'\xff\xff\x00\x00' # set using 4 bytes +//| palette[3] = bytearray(b'\x00\x00\xFF') # set using a bytearay of 3 or 4 bytes +//| palette[4] = (10, 20, 30) # set using a tuple of 3 integers""" +//| ... //| STATIC mp_obj_t palette_subscr(mp_obj_t self_in, mp_obj_t index_in, mp_obj_t value) { if (value == MP_OBJ_NULL) { @@ -144,7 +152,7 @@ STATIC mp_obj_t palette_subscr(mp_obj_t self_in, mp_obj_t index_in, mp_obj_t val return mp_const_none; } -//| .. method:: make_transparent(palette_index) +//| def make_transparent(self, palette_index: Any) -> Any: ... //| STATIC mp_obj_t displayio_palette_obj_make_transparent(mp_obj_t self_in, mp_obj_t palette_index_obj) { displayio_palette_t *self = MP_OBJ_TO_PTR(self_in); @@ -158,7 +166,7 @@ STATIC mp_obj_t displayio_palette_obj_make_transparent(mp_obj_t self_in, mp_obj_ } MP_DEFINE_CONST_FUN_OBJ_2(displayio_palette_make_transparent_obj, displayio_palette_obj_make_transparent); -//| .. method:: make_opaque(palette_index) +//| def make_opaque(self, palette_index: Any) -> Any: ... //| STATIC mp_obj_t displayio_palette_obj_make_opaque(mp_obj_t self_in, mp_obj_t palette_index_obj) { displayio_palette_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/displayio/ParallelBus.c b/shared-bindings/displayio/ParallelBus.c index bdafdaef6..cedcf1de5 100644 --- a/shared-bindings/displayio/ParallelBus.c +++ b/shared-bindings/displayio/ParallelBus.c @@ -37,31 +37,32 @@ #include "shared-module/displayio/__init__.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: displayio +//| class ParallelBus: +//| """.. currentmodule:: displayio //| -//| :class:`ParallelBus` -- Manage updating a display over 8-bit parallel bus -//| ============================================================================== +//| :class:`ParallelBus` -- Manage updating a display over 8-bit parallel bus +//| ============================================================================== //| -//| Manage updating a display over 8-bit parallel bus in the background while Python code runs. This -//| protocol may be refered to as 8080-I Series Parallel Interface in datasheets. It doesn't handle -//| display initialization. +//| Manage updating a display over 8-bit parallel bus in the background while Python code runs. This +//| protocol may be refered to as 8080-I Series Parallel Interface in datasheets. It doesn't handle +//| display initialization.""" //| -//| .. class:: ParallelBus(*, data0, command, chip_select, write, read, reset) +//| def __init__(self, *, data0: microcontroller.Pin, command: microcontroller.Pin, chip_select: microcontroller.Pin, write: microcontroller.Pin, read: microcontroller.Pin, reset: microcontroller.Pin): +//| """Create a ParallelBus object associated with the given pins. The bus is inferred from data0 +//| by implying the next 7 additional pins on a given GPIO port. //| -//| Create a ParallelBus object associated with the given pins. The bus is inferred from data0 -//| by implying the next 7 additional pins on a given GPIO port. +//| The parallel bus and pins are then in use by the display until `displayio.release_displays()` +//| is called even after a reload. (It does this so CircuitPython can use the display after your +//| code is done.) So, the first time you initialize a display bus in code.py you should call +//| :py:func`displayio.release_displays` first, otherwise it will error after the first code.py run. //| -//| The parallel bus and pins are then in use by the display until `displayio.release_displays()` -//| is called even after a reload. (It does this so CircuitPython can use the display after your -//| code is done.) So, the first time you initialize a display bus in code.py you should call -//| :py:func`displayio.release_displays` first, otherwise it will error after the first code.py run. -//| -//| :param microcontroller.Pin data0: The first data pin. The rest are implied -//| :param microcontroller.Pin command: Data or command pin -//| :param microcontroller.Pin chip_select: Chip select pin -//| :param microcontroller.Pin write: Write pin -//| :param microcontroller.Pin read: Read pin -//| :param microcontroller.Pin reset: Reset pin +//| :param microcontroller.Pin data0: The first data pin. The rest are implied +//| :param microcontroller.Pin command: Data or command pin +//| :param microcontroller.Pin chip_select: Chip select pin +//| :param microcontroller.Pin write: Write pin +//| :param microcontroller.Pin read: Read pin +//| :param microcontroller.Pin reset: Reset pin""" +//| ... //| STATIC mp_obj_t displayio_parallelbus_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_data0, ARG_command, ARG_chip_select, ARG_write, ARG_read, ARG_reset }; @@ -90,11 +91,12 @@ STATIC mp_obj_t displayio_parallelbus_make_new(const mp_obj_type_t *type, size_t return self; } -//| .. method:: reset() -//| -//| Performs a hardware reset via the reset pin. Raises an exception if called when no reset pin -//| is available. +//| def reset(self, ) -> Any: +//| """Performs a hardware reset via the reset pin. Raises an exception if called when no reset pin +//| is available.""" +//| ... //| + STATIC mp_obj_t displayio_parallelbus_obj_reset(mp_obj_t self_in) { displayio_parallelbus_obj_t *self = self_in; @@ -105,10 +107,10 @@ STATIC mp_obj_t displayio_parallelbus_obj_reset(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(displayio_parallelbus_reset_obj, displayio_parallelbus_obj_reset); -//| .. method:: send(command, data) -//| -//| Sends the given command value followed by the full set of data. Display state, such as -//| vertical scroll, set via ``send`` may or may not be reset once the code is done. +//| def send(self, command: Any, data: Any) -> Any: +//| """Sends the given command value followed by the full set of data. Display state, such as +//| vertical scroll, set via ``send`` may or may not be reset once the code is done.""" +//| ... //| STATIC mp_obj_t displayio_parallelbus_obj_send(mp_obj_t self, mp_obj_t command_obj, mp_obj_t data_obj) { mp_int_t command_int = MP_OBJ_SMALL_INT_VALUE(command_obj); diff --git a/shared-bindings/displayio/Shape.c b/shared-bindings/displayio/Shape.c index 7c7b10501..0f22bb2a3 100644 --- a/shared-bindings/displayio/Shape.c +++ b/shared-bindings/displayio/Shape.c @@ -34,22 +34,23 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: displayio +//| class Shape: +//| """.. currentmodule:: displayio //| -//| :class:`Shape` -- Represents a shape by defining its bounds on each row -//| ========================================================================== +//| :class:`Shape` -- Represents a shape by defining its bounds on each row +//| ========================================================================== //| -//| Represents any shape made by defining boundaries that may be mirrored. +//| Represents any shape made by defining boundaries that may be mirrored.""" //| -//| .. class:: Shape(width, height, *, mirror_x=False, mirror_y=False) +//| def __init__(self, width: int, height: int, *, mirror_x: bool = False, mirror_y: bool = False): +//| """Create a Shape object with the given fixed size. Each pixel is one bit and is stored by the +//| column boundaries of the shape on each row. Each row's boundary defaults to the full row. //| -//| Create a Shape object with the given fixed size. Each pixel is one bit and is stored by the -//| column boundaries of the shape on each row. Each row's boundary defaults to the full row. -//| -//| :param int width: The number of pixels wide -//| :param int height: The number of pixels high -//| :param bool mirror_x: When true the left boundary is mirrored to the right. -//| :param bool mirror_y: When true the top boundary is mirrored to the bottom. +//| :param int width: The number of pixels wide +//| :param int height: The number of pixels high +//| :param bool mirror_x: When true the left boundary is mirrored to the right. +//| :param bool mirror_y: When true the top boundary is mirrored to the bottom.""" +//| ... //| STATIC mp_obj_t displayio_shape_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_width, ARG_height, ARG_mirror_x, ARG_mirror_y }; @@ -83,9 +84,9 @@ STATIC mp_obj_t displayio_shape_make_new(const mp_obj_type_t *type, size_t n_arg } -//| .. method:: set_boundary(y, start_x, end_x) -//| -//| Loads pre-packed data into the given row. +//| def set_boundary(self, y: Any, start_x: Any, end_x: Any) -> Any: +//| """Loads pre-packed data into the given row.""" +//| ... //| STATIC mp_obj_t displayio_shape_obj_set_boundary(size_t n_args, const mp_obj_t *args) { (void) n_args; diff --git a/shared-bindings/displayio/TileGrid.c b/shared-bindings/displayio/TileGrid.c index 288eb4b23..e7410e4b6 100644 --- a/shared-bindings/displayio/TileGrid.c +++ b/shared-bindings/displayio/TileGrid.c @@ -40,33 +40,33 @@ #include "shared-bindings/displayio/Shape.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: displayio +//| class TileGrid: +//| """.. currentmodule:: displayio //| -//| :class:`TileGrid` -- A grid of tiles sourced out of one bitmap -//| ========================================================================== +//| :class:`TileGrid` -- A grid of tiles sourced out of one bitmap +//| ========================================================================== //| -//| Position a grid of tiles sourced from a bitmap and pixel_shader combination. Multiple grids -//| can share bitmaps and pixel shaders. +//| Position a grid of tiles sourced from a bitmap and pixel_shader combination. Multiple grids +//| can share bitmaps and pixel shaders. //| -//| A single tile grid is also known as a Sprite. +//| A single tile grid is also known as a Sprite.""" //| -//| .. class:: TileGrid(bitmap, *, pixel_shader, width=1, height=1, tile_width=None, tile_height=None, default_tile=0, x=0, y=0) +//| def __init__(self, bitmap: displayio.Bitmap, *, pixel_shader: displayio.Palette, width: int = 1, height: int = 1, tile_width: int = None, tile_height: int = None, default_tile: int = 0, x: int = 0, y: int = 0): +//| """Create a TileGrid object. The bitmap is source for 2d pixels. The pixel_shader is used to +//| convert the value and its location to a display native pixel color. This may be a simple color +//| palette lookup, a gradient, a pattern or a color transformer. //| -//| Create a TileGrid object. The bitmap is source for 2d pixels. The pixel_shader is used to -//| convert the value and its location to a display native pixel color. This may be a simple color -//| palette lookup, a gradient, a pattern or a color transformer. +//| tile_width and tile_height match the height of the bitmap by default. //| -//| tile_width and tile_height match the height of the bitmap by default. -//| -//| :param displayio.Bitmap bitmap: The bitmap storing one or more tiles. -//| :param displayio.Palette pixel_shader: The pixel shader that produces colors from values -//| :param int width: Width of the grid in tiles. -//| :param int height: Height of the grid in tiles. -//| :param int tile_width: Width of a single tile in pixels. Defaults to the full Bitmap and must evenly divide into the Bitmap's dimensions. -//| :param int tile_height: Height of a single tile in pixels. Defaults to the full Bitmap and must evenly divide into the Bitmap's dimensions. -//| :param int default_tile: Default tile index to show. -//| :param int x: Initial x position of the left edge within the parent. -//| :param int y: Initial y position of the top edge within the parent. +//| :param displayio.Bitmap bitmap: The bitmap storing one or more tiles. +//| :param displayio.Palette pixel_shader: The pixel shader that produces colors from values +//| :param int width: Width of the grid in tiles. +//| :param int height: Height of the grid in tiles. +//| :param int tile_width: Width of a single tile in pixels. Defaults to the full Bitmap and must evenly divide into the Bitmap's dimensions. +//| :param int tile_height: Height of a single tile in pixels. Defaults to the full Bitmap and must evenly divide into the Bitmap's dimensions. +//| :param int default_tile: Default tile index to show. +//| :param int x: Initial x position of the left edge within the parent. +//| :param int y: Initial y position of the top edge within the parent.""" //| STATIC mp_obj_t displayio_tilegrid_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_bitmap, ARG_pixel_shader, ARG_width, ARG_height, ARG_tile_width, ARG_tile_height, ARG_default_tile, ARG_x, ARG_y }; @@ -144,9 +144,8 @@ static displayio_tilegrid_t* native_tilegrid(mp_obj_t tilegrid_obj) { mp_obj_assert_native_inited(native_tilegrid); return MP_OBJ_TO_PTR(native_tilegrid); } -//| .. attribute:: hidden -//| -//| True when the TileGrid is hidden. This may be False even when a part of a hidden Group. +//| hidden: Any = ... +//| """True when the TileGrid is hidden. This may be False even when a part of a hidden Group.""" //| STATIC mp_obj_t displayio_tilegrid_obj_get_hidden(mp_obj_t self_in) { displayio_tilegrid_t *self = native_tilegrid(self_in); @@ -169,9 +168,8 @@ const mp_obj_property_t displayio_tilegrid_hidden_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: x -//| -//| X position of the left edge in the parent. +//| x: Any = ... +//| """X position of the left edge in the parent.""" //| STATIC mp_obj_t displayio_tilegrid_obj_get_x(mp_obj_t self_in) { displayio_tilegrid_t *self = native_tilegrid(self_in); @@ -195,9 +193,8 @@ const mp_obj_property_t displayio_tilegrid_x_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: y -//| -//| Y position of the top edge in the parent. +//| y: Any = ... +//| """Y position of the top edge in the parent.""" //| STATIC mp_obj_t displayio_tilegrid_obj_get_y(mp_obj_t self_in) { displayio_tilegrid_t *self = native_tilegrid(self_in); @@ -221,9 +218,8 @@ const mp_obj_property_t displayio_tilegrid_y_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: flip_x -//| -//| If true, the left edge rendered will be the right edge of the right-most tile. +//| flip_x: Any = ... +//| """If true, the left edge rendered will be the right edge of the right-most tile.""" //| STATIC mp_obj_t displayio_tilegrid_obj_get_flip_x(mp_obj_t self_in) { displayio_tilegrid_t *self = native_tilegrid(self_in); @@ -246,9 +242,8 @@ const mp_obj_property_t displayio_tilegrid_flip_x_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: flip_y -//| -//| If true, the top edge rendered will be the bottom edge of the bottom-most tile. +//| flip_y: Any = ... +//| """If true, the top edge rendered will be the bottom edge of the bottom-most tile.""" //| STATIC mp_obj_t displayio_tilegrid_obj_get_flip_y(mp_obj_t self_in) { displayio_tilegrid_t *self = native_tilegrid(self_in); @@ -272,10 +267,9 @@ const mp_obj_property_t displayio_tilegrid_flip_y_obj = { }; -//| .. attribute:: transpose_xy -//| -//| If true, the TileGrid's axis will be swapped. When combined with mirroring, any 90 degree -//| rotation can be achieved along with the corresponding mirrored version. +//| transpose_xy: Any = ... +//| """If true, the TileGrid's axis will be swapped. When combined with mirroring, any 90 degree +//| rotation can be achieved along with the corresponding mirrored version.""" //| STATIC mp_obj_t displayio_tilegrid_obj_get_transpose_xy(mp_obj_t self_in) { displayio_tilegrid_t *self = native_tilegrid(self_in); @@ -298,9 +292,8 @@ const mp_obj_property_t displayio_tilegrid_transpose_xy_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: pixel_shader -//| -//| The pixel shader of the tilegrid. +//| pixel_shader: Any = ... +//| """The pixel shader of the tilegrid.""" //| STATIC mp_obj_t displayio_tilegrid_obj_get_pixel_shader(mp_obj_t self_in) { displayio_tilegrid_t *self = native_tilegrid(self_in); @@ -327,27 +320,27 @@ const mp_obj_property_t displayio_tilegrid_pixel_shader_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: __getitem__(index) -//| -//| Returns the tile index at the given index. The index can either be an x,y tuple or an int equal -//| to ``y * width + x``. -//| -//| This allows you to:: +//| def __getitem__(self, index: Any) -> Any: +//| """Returns the tile index at the given index. The index can either be an x,y tuple or an int equal +//| to ``y * width + x``. //| -//| print(grid[0]) +//| This allows you to:: //| -//| .. method:: __setitem__(index, tile_index) +//| print(grid[0])""" +//| ... //| -//| Sets the tile index at the given index. The index can either be an x,y tuple or an int equal -//| to ``y * width + x``. +//| def __setitem__(self, index: Any, tile_index: Any) -> Any: +//| """Sets the tile index at the given index. The index can either be an x,y tuple or an int equal +//| to ``y * width + x``. //| -//| This allows you to:: +//| This allows you to:: //| -//| grid[0] = 10 +//| grid[0] = 10 //| -//| or:: +//| or:: //| -//| grid[0,0] = 10 +//| grid[0,0] = 10""" +//| ... //| STATIC mp_obj_t tilegrid_subscr(mp_obj_t self_in, mp_obj_t index_obj, mp_obj_t value_obj) { displayio_tilegrid_t *self = native_tilegrid(self_in); diff --git a/shared-bindings/displayio/__init__.c b/shared-bindings/displayio/__init__.c index f78325593..37c025329 100644 --- a/shared-bindings/displayio/__init__.c +++ b/shared-bindings/displayio/__init__.c @@ -43,7 +43,7 @@ #include "shared-bindings/displayio/Shape.h" #include "shared-bindings/displayio/TileGrid.h" -//| :mod:`displayio` --- Native display driving +//| """:mod:`displayio` --- Native display driving //| ========================================================================= //| //| .. module:: displayio @@ -69,18 +69,18 @@ //| Palette //| ParallelBus //| Shape -//| TileGrid +//| TileGrid""" //| -//| .. function:: release_displays() +//| def release_displays() -> Any: +//| """Releases any actively used displays so their busses and pins can be used again. This will also +//| release the builtin display on boards that have one. You will need to reinitialize it yourself +//| afterwards. This may take seconds to complete if an active EPaperDisplay is refreshing. //| -//| Releases any actively used displays so their busses and pins can be used again. This will also -//| release the builtin display on boards that have one. You will need to reinitialize it yourself -//| afterwards. This may take seconds to complete if an active EPaperDisplay is refreshing. -//| -//| Use this once in your code.py if you initialize a display. Place it right before the -//| initialization so the display is active as long as possible. +//| Use this once in your code.py if you initialize a display. Place it right before the +//| initialization so the display is active as long as possible.""" +//| ... //| STATIC mp_obj_t displayio_release_displays(void) { common_hal_displayio_release_displays(); -- cgit v1.2.3 From a3d5adb43c897d591baabaaf1e7ef83deedbd3ce Mon Sep 17 00:00:00 2001 From: dherrada Date: Thu, 7 May 2020 11:56:46 -0400 Subject: Did _eve, fontio, framebufferio, and frequencyio --- shared-bindings/_eve/__init__.c | 441 +++++++++++---------- shared-bindings/fontio/BuiltinFont.c | 38 +- shared-bindings/fontio/Glyph.c | 29 +- shared-bindings/fontio/__init__.c | 4 +- shared-bindings/framebufferio/FramebufferDisplay.c | 109 +++-- shared-bindings/framebufferio/__init__.c | 4 +- shared-bindings/frequencyio/FrequencyIn.c | 106 ++--- shared-bindings/frequencyio/__init__.c | 4 +- 8 files changed, 371 insertions(+), 364 deletions(-) diff --git a/shared-bindings/_eve/__init__.c b/shared-bindings/_eve/__init__.c index 9bc790f5d..0e78cea16 100644 --- a/shared-bindings/_eve/__init__.c +++ b/shared-bindings/_eve/__init__.c @@ -34,7 +34,20 @@ #include "shared-module/_eve/__init__.h" #include "shared-bindings/_eve/__init__.h" -//| :mod:`_eve` --- low-level BridgeTek EVE bindings + + + + + + + + + + + + + +//| """:mod:`_eve` --- low-level BridgeTek EVE bindings //| ================================================ //| //| .. module:: _eve @@ -43,7 +56,7 @@ //| //| The `_eve` module provides a class _EVE which //| contains methods for constructing EVE command -//| buffers and appending basic graphics commands. +//| buffers and appending basic graphics commands.""" //| typedef struct _mp_obj__EVE_t { @@ -63,11 +76,11 @@ STATIC mp_obj_t _register(mp_obj_t self, mp_obj_t o) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(register_obj, _register); -//| .. method:: flush() -//| -//| Send any queued drawing commands directly to the hardware. +//| def flush(self, ) -> Any: +//| """Send any queued drawing commands directly to the hardware. //| -//| :param int width: The width of the grid in tiles, or 1 for sprites. +//| :param int width: The width of the grid in tiles, or 1 for sprites.""" +//| ... //| STATIC mp_obj_t _flush(mp_obj_t self) { common_hal__eve_flush(EVEHAL(self)); @@ -75,11 +88,11 @@ STATIC mp_obj_t _flush(mp_obj_t self) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(flush_obj, _flush); -//| .. method:: cc(b) -//| -//| Append bytes to the command FIFO. +//| def cc(self, b: bytes) -> Any: +//| """Append bytes to the command FIFO. //| -//| :param bytes b: The bytes to add +//| :param bytes b: The bytes to add""" +//| ... //| STATIC mp_obj_t _cc(mp_obj_t self, mp_obj_t b) { mp_buffer_info_t buffer_info; @@ -91,14 +104,14 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(cc_obj, _cc); //{ -//| .. method:: AlphaFunc(func, ref) -//| -//| Set the alpha test function +//| def AlphaFunc(self, func: int, ref: int) -> Any: +//| """Set the alpha test function //| //| :param int func: specifies the test function, one of ``NEVER``, ``LESS``, ``LEQUAL``, ``GREATER``, ``GEQUAL``, ``EQUAL``, ``NOTEQUAL``, or ``ALWAYS``. Range 0-7. The initial value is ALWAYS(7) //| :param int ref: specifies the reference value for the alpha test. Range 0-255. The initial value is 0 //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _alphafunc(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { @@ -109,14 +122,14 @@ STATIC mp_obj_t _alphafunc(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(alphafunc_obj, _alphafunc); -//| .. method:: Begin(prim) -//| -//| Begin drawing a graphics primitive +//| def Begin(self, prim: int) -> Any: +//| """Begin drawing a graphics primitive //| //| :param int prim: graphics primitive. //| -//| Valid primitives are ``BITMAPS``, ``POINTS``, ``LINES``, ``LINE_STRIP``, ``EDGE_STRIP_R``, ``EDGE_STRIP_L``, ``EDGE_STRIP_A``, ``EDGE_STRIP_B`` and ``RECTS``. -//| +//| Valid primitives are ``BITMAPS``, ``POINTS``, ``LINES``, ``LINE_STRIP``, ``EDGE_STRIP_R``, ``EDGE_STRIP_L``, ``EDGE_STRIP_A``, ``EDGE_STRIP_B`` and ``RECTS``.""" +//| ... +//| STATIC mp_obj_t _begin(mp_obj_t self, mp_obj_t a0) { uint32_t prim = mp_obj_get_int_truncated(a0); @@ -125,11 +138,11 @@ STATIC mp_obj_t _begin(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(begin_obj, _begin); -//| .. method:: BitmapExtFormat(format) +//| def BitmapExtFormat(self, format: int) -> Any: +//| """Set the bitmap format //| -//| Set the bitmap format -//| -//| :param int format: bitmap pixel format. +//| :param int format: bitmap pixel format.""" +//| ... //| STATIC mp_obj_t _bitmapextformat(mp_obj_t self, mp_obj_t a0) { @@ -139,13 +152,13 @@ STATIC mp_obj_t _bitmapextformat(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(bitmapextformat_obj, _bitmapextformat); -//| .. method:: BitmapHandle(handle) -//| -//| Set the bitmap handle +//| def BitmapHandle(self, handle: int) -> Any: +//| """Set the bitmap handle //| //| :param int handle: bitmap handle. Range 0-31. The initial value is 0 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _bitmaphandle(mp_obj_t self, mp_obj_t a0) { @@ -155,12 +168,12 @@ STATIC mp_obj_t _bitmaphandle(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(bitmaphandle_obj, _bitmaphandle); -//| .. method:: BitmapLayoutH(linestride, height) -//| -//| Set the source bitmap memory format and layout for the current handle. high bits for large bitmaps +//| def BitmapLayoutH(self, linestride: int, height: int) -> Any: +//| """Set the source bitmap memory format and layout for the current handle. high bits for large bitmaps //| //| :param int linestride: high part of bitmap line stride, in bytes. Range 0-7 -//| :param int height: high part of bitmap height, in lines. Range 0-3 +//| :param int height: high part of bitmap height, in lines. Range 0-3""" +//| ... //| STATIC mp_obj_t _bitmaplayouth(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { @@ -171,13 +184,13 @@ STATIC mp_obj_t _bitmaplayouth(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(bitmaplayouth_obj, _bitmaplayouth); -//| .. method:: BitmapLayout(format, linestride, height) -//| -//| Set the source bitmap memory format and layout for the current handle +//| def BitmapLayout(self, format: int, linestride: int, height: int) -> Any: +//| """Set the source bitmap memory format and layout for the current handle //| //| :param int format: bitmap pixel format, or GLFORMAT to use BITMAP_EXT_FORMAT instead. Range 0-31 //| :param int linestride: bitmap line stride, in bytes. Range 0-1023 -//| :param int height: bitmap height, in lines. Range 0-511 +//| :param int height: bitmap height, in lines. Range 0-511""" +//| ... //| STATIC mp_obj_t _bitmaplayout(size_t n_args, const mp_obj_t *args) { @@ -189,12 +202,12 @@ STATIC mp_obj_t _bitmaplayout(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(bitmaplayout_obj, 4, 4, _bitmaplayout); -//| .. method:: BitmapSizeH(width, height) -//| -//| Set the screen drawing of bitmaps for the current handle. high bits for large bitmaps +//| def BitmapSizeH(self, width: int, height: int) -> Any: +//| """Set the screen drawing of bitmaps for the current handle. high bits for large bitmaps //| //| :param int width: high part of drawn bitmap width, in pixels. Range 0-3 -//| :param int height: high part of drawn bitmap height, in pixels. Range 0-3 +//| :param int height: high part of drawn bitmap height, in pixels. Range 0-3""" +//| ... //| STATIC mp_obj_t _bitmapsizeh(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { @@ -205,15 +218,15 @@ STATIC mp_obj_t _bitmapsizeh(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(bitmapsizeh_obj, _bitmapsizeh); -//| .. method:: BitmapSize(filter, wrapx, wrapy, width, height) -//| -//| Set the screen drawing of bitmaps for the current handle +//| def BitmapSize(self, filter: int, wrapx: int, wrapy: int, width: int, height: int) -> Any: +//| """Set the screen drawing of bitmaps for the current handle //| //| :param int filter: bitmap filtering mode, one of ``NEAREST`` or ``BILINEAR``. Range 0-1 //| :param int wrapx: bitmap :math:`x` wrap mode, one of ``REPEAT`` or ``BORDER``. Range 0-1 //| :param int wrapy: bitmap :math:`y` wrap mode, one of ``REPEAT`` or ``BORDER``. Range 0-1 //| :param int width: drawn bitmap width, in pixels. Range 0-511 -//| :param int height: drawn bitmap height, in pixels. Range 0-511 +//| :param int height: drawn bitmap height, in pixels. Range 0-511""" +//| ... //| STATIC mp_obj_t _bitmapsize(size_t n_args, const mp_obj_t *args) { @@ -227,11 +240,11 @@ STATIC mp_obj_t _bitmapsize(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(bitmapsize_obj, 6, 6, _bitmapsize); -//| .. method:: BitmapSource(addr) +//| def BitmapSource(self, addr: int) -> Any: +//| """Set the source address for bitmap graphics //| -//| Set the source address for bitmap graphics -//| -//| :param int addr: Bitmap start address, pixel-aligned. May be in SRAM or flash. Range 0-16777215 +//| :param int addr: Bitmap start address, pixel-aligned. May be in SRAM or flash. Range 0-16777215""" +//| ... //| STATIC mp_obj_t _bitmapsource(mp_obj_t self, mp_obj_t a0) { @@ -241,14 +254,14 @@ STATIC mp_obj_t _bitmapsource(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(bitmapsource_obj, _bitmapsource); -//| .. method:: BitmapSwizzle(r, g, b, a) -//| -//| Set the source for the r,g,b and a channels of a bitmap +//| def BitmapSwizzle(self, r: int, g: int, b: int, a: int) -> Any: +//| """Set the source for the r,g,b and a channels of a bitmap //| //| :param int r: red component source channel. Range 0-7 //| :param int g: green component source channel. Range 0-7 //| :param int b: blue component source channel. Range 0-7 -//| :param int a: alpha component source channel. Range 0-7 +//| :param int a: alpha component source channel. Range 0-7""" +//| ... //| STATIC mp_obj_t _bitmapswizzle(size_t n_args, const mp_obj_t *args) { @@ -261,16 +274,16 @@ STATIC mp_obj_t _bitmapswizzle(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(bitmapswizzle_obj, 5, 5, _bitmapswizzle); -//| .. method:: BitmapTransformA(p, v) -//| -//| Set the :math:`a` component of the bitmap transform matrix +//| def BitmapTransformA(self, p: Any, v: int) -> Any: +//| """Set the :math:`a` component of the bitmap transform matrix //| //| :param int p: precision control: 0 is 8.8, 1 is 1.15. Range 0-1. The initial value is 0 //| :param int v: The :math:`a` component of the bitmap transform matrix, in signed 8.8 or 1.15 bit fixed-point form. Range 0-131071. The initial value is 256 //| //| The initial value is **p** = 0, **v** = 256. This represents the value 1.0. //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _bitmaptransforma(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { @@ -281,16 +294,16 @@ STATIC mp_obj_t _bitmaptransforma(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(bitmaptransforma_obj, _bitmaptransforma); -//| .. method:: BitmapTransformB(p, v) -//| -//| Set the :math:`b` component of the bitmap transform matrix +//| def BitmapTransformB(self, p: Any, v: int) -> Any: +//| """Set the :math:`b` component of the bitmap transform matrix //| //| :param int p: precision control: 0 is 8.8, 1 is 1.15. Range 0-1. The initial value is 0 //| :param int v: The :math:`b` component of the bitmap transform matrix, in signed 8.8 or 1.15 bit fixed-point form. Range 0-131071. The initial value is 0 //| //| The initial value is **p** = 0, **v** = 0. This represents the value 0.0. //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _bitmaptransformb(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { @@ -301,13 +314,13 @@ STATIC mp_obj_t _bitmaptransformb(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(bitmaptransformb_obj, _bitmaptransformb); -//| .. method:: BitmapTransformC(v) -//| -//| Set the :math:`c` component of the bitmap transform matrix +//| def BitmapTransformC(self, v: int) -> Any: +//| """Set the :math:`c` component of the bitmap transform matrix //| //| :param int v: The :math:`c` component of the bitmap transform matrix, in signed 15.8 bit fixed-point form. Range 0-16777215. The initial value is 0 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _bitmaptransformc(mp_obj_t self, mp_obj_t a0) { @@ -317,16 +330,16 @@ STATIC mp_obj_t _bitmaptransformc(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(bitmaptransformc_obj, _bitmaptransformc); -//| .. method:: BitmapTransformD(p, v) -//| -//| Set the :math:`d` component of the bitmap transform matrix +//| def BitmapTransformD(self, p: Any, v: int) -> Any: +//| """Set the :math:`d` component of the bitmap transform matrix //| //| :param int p: precision control: 0 is 8.8, 1 is 1.15. Range 0-1. The initial value is 0 //| :param int v: The :math:`d` component of the bitmap transform matrix, in signed 8.8 or 1.15 bit fixed-point form. Range 0-131071. The initial value is 0 //| //| The initial value is **p** = 0, **v** = 0. This represents the value 0.0. //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _bitmaptransformd(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { @@ -337,16 +350,16 @@ STATIC mp_obj_t _bitmaptransformd(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(bitmaptransformd_obj, _bitmaptransformd); -//| .. method:: BitmapTransformE(p, v) -//| -//| Set the :math:`e` component of the bitmap transform matrix +//| def BitmapTransformE(self, p: Any, v: int) -> Any: +//| """Set the :math:`e` component of the bitmap transform matrix //| //| :param int p: precision control: 0 is 8.8, 1 is 1.15. Range 0-1. The initial value is 0 //| :param int v: The :math:`e` component of the bitmap transform matrix, in signed 8.8 or 1.15 bit fixed-point form. Range 0-131071. The initial value is 256 //| //| The initial value is **p** = 0, **v** = 256. This represents the value 1.0. //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _bitmaptransforme(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { @@ -357,13 +370,13 @@ STATIC mp_obj_t _bitmaptransforme(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(bitmaptransforme_obj, _bitmaptransforme); -//| .. method:: BitmapTransformF(v) -//| -//| Set the :math:`f` component of the bitmap transform matrix +//| def BitmapTransformF(self, v: int) -> Any: +//| """Set the :math:`f` component of the bitmap transform matrix //| //| :param int v: The :math:`f` component of the bitmap transform matrix, in signed 15.8 bit fixed-point form. Range 0-16777215. The initial value is 0 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _bitmaptransformf(mp_obj_t self, mp_obj_t a0) { @@ -373,14 +386,14 @@ STATIC mp_obj_t _bitmaptransformf(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(bitmaptransformf_obj, _bitmaptransformf); -//| .. method:: BlendFunc(src, dst) -//| -//| Set pixel arithmetic +//| def BlendFunc(self, src: int, dst: int) -> Any: +//| """Set pixel arithmetic //| //| :param int src: specifies how the source blending factor is computed. One of ``ZERO``, ``ONE``, ``SRC_ALPHA``, ``DST_ALPHA``, ``ONE_MINUS_SRC_ALPHA`` or ``ONE_MINUS_DST_ALPHA``. Range 0-7. The initial value is SRC_ALPHA(2) //| :param int dst: specifies how the destination blending factor is computed, one of the same constants as **src**. Range 0-7. The initial value is ONE_MINUS_SRC_ALPHA(4) //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _blendfunc(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { @@ -391,11 +404,11 @@ STATIC mp_obj_t _blendfunc(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(blendfunc_obj, _blendfunc); -//| .. method:: Call(dest) -//| -//| Execute a sequence of commands at another location in the display list +//| def Call(self, dest: int) -> Any: +//| """Execute a sequence of commands at another location in the display list //| -//| :param int dest: display list address. Range 0-65535 +//| :param int dest: display list address. Range 0-65535""" +//| ... //| STATIC mp_obj_t _call(mp_obj_t self, mp_obj_t a0) { @@ -405,13 +418,13 @@ STATIC mp_obj_t _call(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(call_obj, _call); -//| .. method:: Cell(cell) -//| -//| Set the bitmap cell number for the vertex2f command +//| def Cell(self, cell: int) -> Any: +//| """Set the bitmap cell number for the vertex2f command //| //| :param int cell: bitmap cell number. Range 0-127. The initial value is 0 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _cell(mp_obj_t self, mp_obj_t a0) { @@ -421,13 +434,13 @@ STATIC mp_obj_t _cell(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(cell_obj, _cell); -//| .. method:: ClearColorA(alpha) -//| -//| Set clear value for the alpha channel +//| def ClearColorA(self, alpha: int) -> Any: +//| """Set clear value for the alpha channel //| //| :param int alpha: alpha value used when the color buffer is cleared. Range 0-255. The initial value is 0 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _clearcolora(mp_obj_t self, mp_obj_t a0) { @@ -437,15 +450,15 @@ STATIC mp_obj_t _clearcolora(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(clearcolora_obj, _clearcolora); -//| .. method:: ClearColorRGB(red, green, blue) -//| -//| Set clear values for red, green and blue channels +//| def ClearColorRGB(self, red: int, green: int, blue: int) -> Any: +//| """Set clear values for red, green and blue channels //| //| :param int red: red value used when the color buffer is cleared. Range 0-255. The initial value is 0 //| :param int green: green value used when the color buffer is cleared. Range 0-255. The initial value is 0 //| :param int blue: blue value used when the color buffer is cleared. Range 0-255. The initial value is 0 //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _clearcolorrgb(size_t n_args, const mp_obj_t *args) { @@ -457,13 +470,13 @@ STATIC mp_obj_t _clearcolorrgb(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(clearcolorrgb_obj, 4, 4, _clearcolorrgb); -//| .. method:: Clear(c, s, t) -//| -//| Clear buffers to preset values +//| def Clear(self, c: int, s: int, t: int) -> Any: +//| """Clear buffers to preset values //| //| :param int c: clear color buffer. Range 0-1 //| :param int s: clear stencil buffer. Range 0-1 -//| :param int t: clear tag buffer. Range 0-1 +//| :param int t: clear tag buffer. Range 0-1""" +//| ... //| STATIC mp_obj_t _clear(size_t n_args, const mp_obj_t *args) { @@ -475,13 +488,13 @@ STATIC mp_obj_t _clear(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(clear_obj, 1, 4, _clear); -//| .. method:: ClearStencil(s) -//| -//| Set clear value for the stencil buffer +//| def ClearStencil(self, s: int) -> Any: +//| """Set clear value for the stencil buffer //| //| :param int s: value used when the stencil buffer is cleared. Range 0-255. The initial value is 0 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _clearstencil(mp_obj_t self, mp_obj_t a0) { @@ -491,13 +504,12 @@ STATIC mp_obj_t _clearstencil(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(clearstencil_obj, _clearstencil); -//| .. method:: ClearTag(s) -//| -//| Set clear value for the tag buffer +//| def ClearTag(self, s: int) -> Any: +//| """Set clear value for the tag buffer //| //| :param int s: value used when the tag buffer is cleared. Range 0-255. The initial value is 0 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" //| STATIC mp_obj_t _cleartag(mp_obj_t self, mp_obj_t a0) { @@ -507,13 +519,13 @@ STATIC mp_obj_t _cleartag(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(cleartag_obj, _cleartag); -//| .. method:: ColorA(alpha) -//| -//| Set the current color alpha +//| def ColorA(self, alpha: int) -> Any: +//| """Set the current color alpha //| //| :param int alpha: alpha for the current color. Range 0-255. The initial value is 255 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _colora(mp_obj_t self, mp_obj_t a0) { @@ -523,16 +535,16 @@ STATIC mp_obj_t _colora(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(colora_obj, _colora); -//| .. method:: ColorMask(r, g, b, a) -//| -//| Enable and disable writing of frame buffer color components +//| def ColorMask(self, r: int, g: int, b: int, a: int) -> Any: +//| """Enable and disable writing of frame buffer color components //| //| :param int r: allow updates to the frame buffer red component. Range 0-1. The initial value is 1 //| :param int g: allow updates to the frame buffer green component. Range 0-1. The initial value is 1 //| :param int b: allow updates to the frame buffer blue component. Range 0-1. The initial value is 1 //| :param int a: allow updates to the frame buffer alpha component. Range 0-1. The initial value is 1 //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _colormask(size_t n_args, const mp_obj_t *args) { @@ -545,15 +557,15 @@ STATIC mp_obj_t _colormask(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(colormask_obj, 5, 5, _colormask); -//| .. method:: ColorRGB(red, green, blue) -//| -//| Set the drawing color +//| def ColorRGB(self, red: int, green: int, blue: int) -> Any: +//| """Set the drawing color //| //| :param int red: red value for the current color. Range 0-255. The initial value is 255 //| :param int green: green for the current color. Range 0-255. The initial value is 255 //| :param int blue: blue for the current color. Range 0-255. The initial value is 255 //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _colorrgb(size_t n_args, const mp_obj_t *args) { @@ -565,9 +577,8 @@ STATIC mp_obj_t _colorrgb(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(colorrgb_obj, 4, 4, _colorrgb); -//| .. method:: Display() -//| -//| End the display list +//| def Display(self, ) -> Any: ... +//| """End the display list""" //| STATIC mp_obj_t _display(mp_obj_t self) { @@ -577,12 +588,12 @@ STATIC mp_obj_t _display(mp_obj_t self) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(display_obj, _display); -//| .. method:: End() +//| def End(self, ) -> Any: +//| """End drawing a graphics primitive //| -//| End drawing a graphics primitive +//| :meth:`Vertex2ii` and :meth:`Vertex2f` calls are ignored until the next :meth:`Begin`.""" +//| ... //| -//| :meth:`Vertex2ii` and :meth:`Vertex2f` calls are ignored until the next :meth:`Begin`. -//| STATIC mp_obj_t _end(mp_obj_t self) { @@ -591,11 +602,11 @@ STATIC mp_obj_t _end(mp_obj_t self) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(end_obj, _end); -//| .. method:: Jump(dest) +//| def Jump(self, dest: int) -> Any: +//| """Execute commands at another location in the display list //| -//| Execute commands at another location in the display list -//| -//| :param int dest: display list address. Range 0-65535 +//| :param int dest: display list address. Range 0-65535""" +//| ... //| STATIC mp_obj_t _jump(mp_obj_t self, mp_obj_t a0) { @@ -605,13 +616,13 @@ STATIC mp_obj_t _jump(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(jump_obj, _jump); -//| .. method:: LineWidth(width) -//| -//| Set the width of rasterized lines +//| def LineWidth(self, width: int) -> Any: +//| """Set the width of rasterized lines //| //| :param int width: line width in :math:`1/16` pixel. Range 0-4095. The initial value is 16 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _linewidth(mp_obj_t self, mp_obj_t a0) { @@ -621,11 +632,11 @@ STATIC mp_obj_t _linewidth(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(linewidth_obj, _linewidth); -//| .. method:: Macro(m) +//| def Macro(self, m: int) -> Any: +//| """Execute a single command from a macro register //| -//| Execute a single command from a macro register -//| -//| :param int m: macro register to read. Range 0-1 +//| :param int m: macro register to read. Range 0-1""" +//| ... //| STATIC mp_obj_t _macro(mp_obj_t self, mp_obj_t a0) { @@ -635,9 +646,9 @@ STATIC mp_obj_t _macro(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(macro_obj, _macro); -//| .. method:: Nop() -//| -//| No operation +//| def Nop(self, ) -> Any: +//| """No operation""" +//| ... //| STATIC mp_obj_t _nop(mp_obj_t self) { @@ -647,13 +658,13 @@ STATIC mp_obj_t _nop(mp_obj_t self) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(nop_obj, _nop); -//| .. method:: PaletteSource(addr) -//| -//| Set the base address of the palette +//| def PaletteSource(self, addr: int) -> Any: +//| """Set the base address of the palette //| //| :param int addr: Address in graphics SRAM, 2-byte aligned. Range 0-4194303. The initial value is 0 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _palettesource(mp_obj_t self, mp_obj_t a0) { @@ -663,13 +674,13 @@ STATIC mp_obj_t _palettesource(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(palettesource_obj, _palettesource); -//| .. method:: PointSize(size) -//| -//| Set the radius of rasterized points +//| def PointSize(self, size: int) -> Any: +//| """Set the radius of rasterized points //| //| :param int size: point radius in :math:`1/16` pixel. Range 0-8191. The initial value is 16 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _pointsize(mp_obj_t self, mp_obj_t a0) { @@ -679,9 +690,9 @@ STATIC mp_obj_t _pointsize(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(pointsize_obj, _pointsize); -//| .. method:: RestoreContext() -//| -//| Restore the current graphics context from the context stack +//| def RestoreContext(self, ) -> Any: +//| """Restore the current graphics context from the context stack""" +//| ... //| STATIC mp_obj_t _restorecontext(mp_obj_t self) { @@ -691,9 +702,9 @@ STATIC mp_obj_t _restorecontext(mp_obj_t self) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(restorecontext_obj, _restorecontext); -//| .. method:: Return() -//| -//| Return from a previous call command +//| def Return(self, ) -> Any: +//| """Return from a previous call command""" +//| ... //| STATIC mp_obj_t _return(mp_obj_t self) { @@ -703,9 +714,9 @@ STATIC mp_obj_t _return(mp_obj_t self) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(return_obj, _return); -//| .. method:: SaveContext() -//| -//| Push the current graphics context on the context stack +//| def SaveContext(self, ) -> Any: +//| """Push the current graphics context on the context stack""" +//| ... //| STATIC mp_obj_t _savecontext(mp_obj_t self) { @@ -715,14 +726,14 @@ STATIC mp_obj_t _savecontext(mp_obj_t self) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(savecontext_obj, _savecontext); -//| .. method:: ScissorSize(width, height) -//| -//| Set the size of the scissor clip rectangle +//| def ScissorSize(self, width: int, height: int) -> Any: +//| """Set the size of the scissor clip rectangle //| //| :param int width: The width of the scissor clip rectangle, in pixels. Range 0-4095. The initial value is hsize //| :param int height: The height of the scissor clip rectangle, in pixels. Range 0-4095. The initial value is 2048 //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _scissorsize(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { @@ -733,14 +744,14 @@ STATIC mp_obj_t _scissorsize(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(scissorsize_obj, _scissorsize); -//| .. method:: ScissorXY(x, y) -//| -//| Set the top left corner of the scissor clip rectangle +//| def ScissorXY(self, x: int, y: int) -> Any: +//| """Set the top left corner of the scissor clip rectangle //| //| :param int x: The :math:`x` coordinate of the scissor clip rectangle, in pixels. Range 0-2047. The initial value is 0 //| :param int y: The :math:`y` coordinate of the scissor clip rectangle, in pixels. Range 0-2047. The initial value is 0 //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _scissorxy(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { @@ -751,15 +762,15 @@ STATIC mp_obj_t _scissorxy(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(scissorxy_obj, _scissorxy); -//| .. method:: StencilFunc(func, ref, mask) -//| -//| Set function and reference value for stencil testing +//| def StencilFunc(self, func: int, ref: int, mask: int) -> Any: +//| """Set function and reference value for stencil testing //| //| :param int func: specifies the test function, one of ``NEVER``, ``LESS``, ``LEQUAL``, ``GREATER``, ``GEQUAL``, ``EQUAL``, ``NOTEQUAL``, or ``ALWAYS``. Range 0-7. The initial value is ALWAYS(7) //| :param int ref: specifies the reference value for the stencil test. Range 0-255. The initial value is 0 //| :param int mask: specifies a mask that is ANDed with the reference value and the stored stencil value. Range 0-255. The initial value is 255 //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _stencilfunc(size_t n_args, const mp_obj_t *args) { @@ -771,13 +782,13 @@ STATIC mp_obj_t _stencilfunc(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(stencilfunc_obj, 4, 4, _stencilfunc); -//| .. method:: StencilMask(mask) -//| -//| Control the writing of individual bits in the stencil planes +//| def StencilMask(self, mask: int) -> Any: +//| """Control the writing of individual bits in the stencil planes //| //| :param int mask: the mask used to enable writing stencil bits. Range 0-255. The initial value is 255 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _stencilmask(mp_obj_t self, mp_obj_t a0) { @@ -787,14 +798,14 @@ STATIC mp_obj_t _stencilmask(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(stencilmask_obj, _stencilmask); -//| .. method:: StencilOp(sfail, spass) -//| -//| Set stencil test actions +//| def StencilOp(self, sfail: int, spass: int) -> Any: +//| """Set stencil test actions //| //| :param int sfail: specifies the action to take when the stencil test fails, one of ``KEEP``, ``ZERO``, ``REPLACE``, ``INCR``, ``INCR_WRAP``, ``DECR``, ``DECR_WRAP``, and ``INVERT``. Range 0-7. The initial value is KEEP(1) //| :param int spass: specifies the action to take when the stencil test passes, one of the same constants as **sfail**. Range 0-7. The initial value is KEEP(1) //| -//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| These values are part of the graphics context and are saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _stencilop(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { @@ -805,13 +816,13 @@ STATIC mp_obj_t _stencilop(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(stencilop_obj, _stencilop); -//| .. method:: TagMask(mask) -//| -//| Control the writing of the tag buffer +//| def TagMask(self, mask: int) -> Any: +//| """Control the writing of the tag buffer //| //| :param int mask: allow updates to the tag buffer. Range 0-1. The initial value is 1 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _tagmask(mp_obj_t self, mp_obj_t a0) { @@ -821,13 +832,13 @@ STATIC mp_obj_t _tagmask(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(tagmask_obj, _tagmask); -//| .. method:: Tag(s) -//| -//| Set the current tag value +//| def Tag(self, s: int) -> Any: +//| """Set the current tag value //| //| :param int s: tag value. Range 0-255. The initial value is 255 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _tag(mp_obj_t self, mp_obj_t a0) { @@ -837,13 +848,13 @@ STATIC mp_obj_t _tag(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(tag_obj, _tag); -//| .. method:: VertexTranslateX(x) -//| -//| Set the vertex transformation's x translation component +//| def VertexTranslateX(self, x: int) -> Any: +//| """Set the vertex transformation's x translation component //| //| :param int x: signed x-coordinate in :math:`1/16` pixel. Range 0-131071. The initial value is 0 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _vertextranslatex(mp_obj_t self, mp_obj_t a0) { @@ -853,13 +864,13 @@ STATIC mp_obj_t _vertextranslatex(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(vertextranslatex_obj, _vertextranslatex); -//| .. method:: VertexTranslateY(y) -//| -//| Set the vertex transformation's y translation component +//| def VertexTranslateY(self, y: int) -> Any: +//| """Set the vertex transformation's y translation component //| //| :param int y: signed y-coordinate in :math:`1/16` pixel. Range 0-131071. The initial value is 0 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| @@ -870,13 +881,13 @@ STATIC mp_obj_t _vertextranslatey(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(vertextranslatey_obj, _vertextranslatey); -//| .. method:: VertexFormat(frac) -//| -//| Set the precision of vertex2f coordinates +//| def VertexFormat(self, frac: int) -> Any: +//| """Set the precision of vertex2f coordinates //| //| :param int frac: Number of fractional bits in X,Y coordinates, 0-4. Range 0-7. The initial value is 4 //| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`. +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... //| STATIC mp_obj_t _vertexformat(mp_obj_t self, mp_obj_t a0) { @@ -886,15 +897,15 @@ STATIC mp_obj_t _vertexformat(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(vertexformat_obj, _vertexformat); -//| .. method:: Vertex2ii(x, y, handle, cell) -//| -//| :param int x: x-coordinate in pixels. Range 0-511 +//| def Vertex2ii(self, x: int, y: int, handle: int, cell: int) -> Any: +//| """:param int x: x-coordinate in pixels. Range 0-511 //| :param int y: y-coordinate in pixels. Range 0-511 //| :param int handle: bitmap handle. Range 0-31 //| :param int cell: cell number. Range 0-127 //| -//| This method is an alternative to :meth:`Vertex2f`. -//| +//| This method is an alternative to :meth:`Vertex2f`.""" +//| ... +//| STATIC mp_obj_t _vertex2ii(size_t n_args, const mp_obj_t *args) { uint32_t x = mp_obj_get_int_truncated(args[1]); @@ -961,12 +972,12 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(vertex2ii_obj, 3, 5, _vertex2ii); // Hand-written functions { -//| .. method:: Vertex2f(b) -//| -//| Draw a point. +//| def Vertex2f(self, b: Any) -> Any: +//| """Draw a point. //| //| :param float x: pixel x-coordinate -//| :param float y: pixel y-coordinate +//| :param float y: pixel y-coordinate""" +//| ... //| STATIC mp_obj_t _vertex2f(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { mp_float_t x = mp_obj_get_float(a0); @@ -980,14 +991,14 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_3(vertex2f_obj, _vertex2f); #define ADD_X(self, x) \ common_hal__eve_add(EVEHAL(self), sizeof(x), &(x)); -//| .. method:: cmd0(n) -//| -//| Append the command word n to the FIFO +//| def cmd0(self, n: int) -> Any: +//| """Append the command word n to the FIFO //| //| :param int n: The command code //| //| This method is used by the ``eve`` module to efficiently add -//| commands to the FIFO. +//| commands to the FIFO.""" +//| ... //| STATIC mp_obj_t _cmd0(mp_obj_t self, mp_obj_t n) { @@ -997,9 +1008,8 @@ STATIC mp_obj_t _cmd0(mp_obj_t self, mp_obj_t n) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(cmd0_obj, _cmd0); -//| .. method:: cmd(n, fmt, args) -//| -//| Append a command packet to the FIFO. +//| def cmd(self, n: int, fmt: str, args: tuple) -> Any: +//| """Append a command packet to the FIFO. //| //| :param int n: The command code //| :param str fmt: The command format `struct` layout @@ -1008,7 +1018,8 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(cmd0_obj, _cmd0); //| Supported format codes: h, H, i, I. //| //| This method is used by the ``eve`` module to efficiently add -//| commands to the FIFO. +//| commands to the FIFO.""" +//| ... //| STATIC mp_obj_t _cmd(size_t n_args, const mp_obj_t *args) { mp_obj_t self = args[0]; diff --git a/shared-bindings/fontio/BuiltinFont.c b/shared-bindings/fontio/BuiltinFont.c index 74bc4d29e..f60c9e36c 100644 --- a/shared-bindings/fontio/BuiltinFont.c +++ b/shared-bindings/fontio/BuiltinFont.c @@ -36,25 +36,25 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: fontio +//| class BuiltinFont: +//| """.. currentmodule:: fontio //| -//| :class:`BuiltinFont` -- A font built into CircuitPython -//| ========================================================================================= +//| :class:`BuiltinFont` -- A font built into CircuitPython +//| ========================================================================================= //| -//| A font built into CircuitPython. +//| A font built into CircuitPython.""" //| -//| .. class:: BuiltinFont() -//| -//| Creation not supported. Available fonts are defined when CircuitPython is built. See the -//| `Adafruit_CircuitPython_Bitmap_Font `_ -//| library for dynamically loaded fonts. +//| def __init__(self, ): +//| """Creation not supported. Available fonts are defined when CircuitPython is built. See the +//| `Adafruit_CircuitPython_Bitmap_Font `_ +//| library for dynamically loaded fonts.""" +//| ... //| -//| .. attribute:: bitmap -//| -//| Bitmap containing all font glyphs starting with ASCII and followed by unicode. Use +//| bitmap: Any = ... +//| """Bitmap containing all font glyphs starting with ASCII and followed by unicode. Use //| `get_glyph` in most cases. This is useful for use with `displayio.TileGrid` and -//| `terminalio.Terminal`. +//| `terminalio.Terminal`.""" //| STATIC mp_obj_t fontio_builtinfont_obj_get_bitmap(mp_obj_t self_in) { fontio_builtinfont_t *self = MP_OBJ_TO_PTR(self_in); @@ -69,9 +69,9 @@ const mp_obj_property_t fontio_builtinfont_bitmap_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: get_bounding_box() -//| -//| Returns the maximum bounds of all glyphs in the font in a tuple of two values: width, height. +//| def get_bounding_box(self, ) -> Any: +//| """Returns the maximum bounds of all glyphs in the font in a tuple of two values: width, height.""" +//| ... //| STATIC mp_obj_t fontio_builtinfont_obj_get_bounding_box(mp_obj_t self_in) { fontio_builtinfont_t *self = MP_OBJ_TO_PTR(self_in); @@ -81,9 +81,9 @@ STATIC mp_obj_t fontio_builtinfont_obj_get_bounding_box(mp_obj_t self_in) { MP_DEFINE_CONST_FUN_OBJ_1(fontio_builtinfont_get_bounding_box_obj, fontio_builtinfont_obj_get_bounding_box); -//| .. method:: get_glyph(codepoint) -//| -//| Returns a `fontio.Glyph` for the given codepoint or None if no glyph is available. +//| def get_glyph(self, codepoint: Any) -> Any: +//| """Returns a `fontio.Glyph` for the given codepoint or None if no glyph is available.""" +//| ... //| STATIC mp_obj_t fontio_builtinfont_obj_get_glyph(mp_obj_t self_in, mp_obj_t codepoint_obj) { fontio_builtinfont_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/fontio/Glyph.c b/shared-bindings/fontio/Glyph.c index a23284152..6235dbc46 100644 --- a/shared-bindings/fontio/Glyph.c +++ b/shared-bindings/fontio/Glyph.c @@ -28,23 +28,24 @@ #include -//| .. currentmodule:: fontio +//| class Glyph: +//| """.. currentmodule:: fontio //| -//| :class:`Glyph` -- Storage of glyph info -//| ========================================================================== +//| :class:`Glyph` -- Storage of glyph info +//| ==========================================================================""" //| -//| .. class:: Glyph(bitmap, tile_index, width, height, dx, dy, shift_x, shift_y) +//| def __init__(self, bitmap: displayio.Bitmap, tile_index: int, width: int, height: int, dx: int, dy: int, shift_x: int, shift_y: int): +//| """Named tuple used to capture a single glyph and its attributes. //| -//| Named tuple used to capture a single glyph and its attributes. -//| -//| :param displayio.Bitmap bitmap: the bitmap including the glyph -//| :param int tile_index: the tile index within the bitmap -//| :param int width: the width of the glyph's bitmap -//| :param int height: the height of the glyph's bitmap -//| :param int dx: x adjustment to the bitmap's position -//| :param int dy: y adjustment to the bitmap's position -//| :param int shift_x: the x difference to the next glyph -//| :param int shift_y: the y difference to the next glyph +//| :param displayio.Bitmap bitmap: the bitmap including the glyph +//| :param int tile_index: the tile index within the bitmap +//| :param int width: the width of the glyph's bitmap +//| :param int height: the height of the glyph's bitmap +//| :param int dx: x adjustment to the bitmap's position +//| :param int dy: y adjustment to the bitmap's position +//| :param int shift_x: the x difference to the next glyph +//| :param int shift_y: the y difference to the next glyph""" +//| ... //| const mp_obj_namedtuple_type_t fontio_glyph_type = { .base = { diff --git a/shared-bindings/fontio/__init__.c b/shared-bindings/fontio/__init__.c index cd0f5ab0f..478fc1806 100644 --- a/shared-bindings/fontio/__init__.c +++ b/shared-bindings/fontio/__init__.c @@ -33,7 +33,7 @@ #include "shared-bindings/fontio/BuiltinFont.h" #include "shared-bindings/fontio/Glyph.h" -//| :mod:`fontio` --- Core font related data structures +//| """:mod:`fontio` --- Core font related data structures //| ========================================================================= //| //| .. module:: fontio @@ -48,7 +48,7 @@ //| :maxdepth: 3 //| //| BuiltinFont -//| Glyph +//| Glyph""" //| STATIC const mp_rom_map_elem_t fontio_module_globals_table[] = { diff --git a/shared-bindings/framebufferio/FramebufferDisplay.c b/shared-bindings/framebufferio/FramebufferDisplay.c index 9ff6cc12d..5e63b988e 100644 --- a/shared-bindings/framebufferio/FramebufferDisplay.c +++ b/shared-bindings/framebufferio/FramebufferDisplay.c @@ -40,23 +40,24 @@ #include "shared-module/displayio/__init__.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: framebufferio +//| class FramebufferDisplay: +//| """.. currentmodule:: framebufferio //| -//| :class:`FramebufferDisplay` -- Manage updating a display with framebuffer in RAM -//| ================================================================================ +//| :class:`FramebufferDisplay` -- Manage updating a display with framebuffer in RAM +//| ================================================================================ //| -//| This initializes a display and connects it into CircuitPython. Unlike other -//| objects in CircuitPython, Display objects live until `displayio.release_displays()` -//| is called. This is done so that CircuitPython can use the display itself. +//| This initializes a display and connects it into CircuitPython. Unlike other +//| objects in CircuitPython, Display objects live until `displayio.release_displays()` +//| is called. This is done so that CircuitPython can use the display itself.""" //| -//| .. class:: FramebufferDisplay(framebuffer, *, rotation=0, auto_refresh=True) +//| def __init__(self, framebuffer: Any, *, rotation: int = 0, auto_refresh: bool = True): +//| """Create a Display object with the given framebuffer (a buffer, array, ulab.array, etc) //| -//| Create a Display object with the given framebuffer (a buffer, array, ulab.array, etc) -//| -//| :param framebuffer: The framebuffer that the display is connected to -//| :type framebuffer: any core object implementing the framebuffer protocol -//| :param bool auto_refresh: Automatically refresh the screen -//| :param int rotation: The rotation of the display in degrees clockwise. Must be in 90 degree increments (0, 90, 180, 270) +//| :param framebuffer: The framebuffer that the display is connected to +//| :type framebuffer: any core object implementing the framebuffer protocol +//| :param bool auto_refresh: Automatically refresh the screen +//| :param int rotation: The rotation of the display in degrees clockwise. Must be in 90 degree increments (0, 90, 180, 270)""" +//| ... //| STATIC mp_obj_t framebufferio_framebufferdisplay_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_framebuffer, ARG_rotation, ARG_auto_refresh, NUM_ARGS }; @@ -96,12 +97,12 @@ static framebufferio_framebufferdisplay_obj_t* native_display(mp_obj_t display_o return MP_OBJ_TO_PTR(native_display); } -//| .. method:: show(group) -//| -//| Switches to displaying the given group of layers. When group is None, the default -//| CircuitPython terminal will be shown. +//| def show(self, group: Group) -> Any: +//| """Switches to displaying the given group of layers. When group is None, the default +//| CircuitPython terminal will be shown. //| -//| :param Group group: The group to show. +//| :param Group group: The group to show.""" +//| ... //| STATIC mp_obj_t framebufferio_framebufferdisplay_obj_show(mp_obj_t self_in, mp_obj_t group_in) { framebufferio_framebufferdisplay_obj_t *self = native_display(self_in); @@ -118,21 +119,21 @@ STATIC mp_obj_t framebufferio_framebufferdisplay_obj_show(mp_obj_t self_in, mp_o } MP_DEFINE_CONST_FUN_OBJ_2(framebufferio_framebufferdisplay_show_obj, framebufferio_framebufferdisplay_obj_show); -//| .. method:: refresh(*, target_frames_per_second=60, minimum_frames_per_second=1) -//| -//| When auto refresh is off, waits for the target frame rate and then refreshes the display, -//| returning True. If the call has taken too long since the last refresh call for the given -//| target frame rate, then the refresh returns False immediately without updating the screen to -//| hopefully help getting caught up. +//| def refresh(self, *, target_frames_per_second: int = 60, minimum_frames_per_second: int = 1) -> Any: +//| """When auto refresh is off, waits for the target frame rate and then refreshes the display, +//| returning True. If the call has taken too long since the last refresh call for the given +//| target frame rate, then the refresh returns False immediately without updating the screen to +//| hopefully help getting caught up. //| -//| If the time since the last successful refresh is below the minimum frame rate, then an -//| exception will be raised. Set minimum_frames_per_second to 0 to disable. +//| If the time since the last successful refresh is below the minimum frame rate, then an +//| exception will be raised. Set minimum_frames_per_second to 0 to disable. //| -//| When auto refresh is on, updates the display immediately. (The display will also update -//| without calls to this.) +//| When auto refresh is on, updates the display immediately. (The display will also update +//| without calls to this.) //| -//| :param int target_frames_per_second: How many times a second `refresh` should be called and the screen updated. -//| :param int minimum_frames_per_second: The minimum number of times the screen should be updated per second. +//| :param int target_frames_per_second: How many times a second `refresh` should be called and the screen updated. +//| :param int minimum_frames_per_second: The minimum number of times the screen should be updated per second.""" +//| ... //| STATIC mp_obj_t framebufferio_framebufferdisplay_obj_refresh(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_target_frames_per_second, ARG_minimum_frames_per_second }; @@ -153,9 +154,8 @@ STATIC mp_obj_t framebufferio_framebufferdisplay_obj_refresh(size_t n_args, cons } MP_DEFINE_CONST_FUN_OBJ_KW(framebufferio_framebufferdisplay_refresh_obj, 1, framebufferio_framebufferdisplay_obj_refresh); -//| .. attribute:: auto_refresh -//| -//| True when the display is refreshed automatically. +//| auto_refresh: Any = ... +//| """True when the display is refreshed automatically.""" //| STATIC mp_obj_t framebufferio_framebufferdisplay_obj_get_auto_refresh(mp_obj_t self_in) { framebufferio_framebufferdisplay_obj_t *self = native_display(self_in); @@ -179,11 +179,10 @@ const mp_obj_property_t framebufferio_framebufferdisplay_auto_refresh_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: brightness -//| -//| The brightness of the display as a float. 0.0 is off and 1.0 is full brightness. When +//| brightness: Any = ... +//| """The brightness of the display as a float. 0.0 is off and 1.0 is full brightness. When //| `auto_brightness` is True, the value of `brightness` will change automatically. -//| If `brightness` is set, `auto_brightness` will be disabled and will be set to False. +//| If `brightness` is set, `auto_brightness` will be disabled and will be set to False.""" //| STATIC mp_obj_t framebufferio_framebufferdisplay_obj_get_brightness(mp_obj_t self_in) { framebufferio_framebufferdisplay_obj_t *self = native_display(self_in); @@ -217,12 +216,11 @@ const mp_obj_property_t framebufferio_framebufferdisplay_brightness_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: auto_brightness -//| -//| True when the display brightness is adjusted automatically, based on an ambient +//| auto_brightness: Any = ... +//| """True when the display brightness is adjusted automatically, based on an ambient //| light sensor or other method. Note that some displays may have this set to True by default, //| but not actually implement automatic brightness adjustment. `auto_brightness` is set to False -//| if `brightness` is set manually. +//| if `brightness` is set manually.""" //| STATIC mp_obj_t framebufferio_framebufferdisplay_obj_get_auto_brightness(mp_obj_t self_in) { framebufferio_framebufferdisplay_obj_t *self = native_display(self_in); @@ -249,9 +247,8 @@ const mp_obj_property_t framebufferio_framebufferdisplay_auto_brightness_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: width -//| -//| Gets the width of the framebuffer +//| width: Any = ... +//| """Gets the width of the framebuffer""" //| STATIC mp_obj_t framebufferio_framebufferdisplay_obj_get_width(mp_obj_t self_in) { framebufferio_framebufferdisplay_obj_t *self = native_display(self_in); @@ -266,9 +263,8 @@ const mp_obj_property_t framebufferio_framebufferdisplay_width_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: height -//| -//| Gets the height of the framebuffer +//| height: Any = ... +//| """Gets the height of the framebuffer""" //| STATIC mp_obj_t framebufferio_framebufferdisplay_obj_get_height(mp_obj_t self_in) { framebufferio_framebufferdisplay_obj_t *self = native_display(self_in); @@ -283,9 +279,8 @@ const mp_obj_property_t framebufferio_framebufferdisplay_height_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: rotation -//| -//| The rotation of the display as an int in degrees. +//| rotation: Any = ... +//| """The rotation of the display as an int in degrees.""" //| STATIC mp_obj_t framebufferio_framebufferdisplay_obj_get_rotation(mp_obj_t self_in) { framebufferio_framebufferdisplay_obj_t *self = native_display(self_in); @@ -307,9 +302,8 @@ const mp_obj_property_t framebufferio_framebufferdisplay_rotation_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: framebuffer -//| -//| The framebuffer being used by the display +//| framebuffer: Any = ... +//| """The framebuffer being used by the display""" //| //| STATIC mp_obj_t framebufferio_framebufferdisplay_obj_get_framebuffer(mp_obj_t self_in) { @@ -326,12 +320,13 @@ const mp_obj_property_t framebufferio_framebufferframebuffer_obj = { }; -//| .. method:: fill_row(y, buffer) +//| def fill_row(self, y: int, buffer: bytearray) -> Any: +//| """Extract the pixels from a single row //| -//| Extract the pixels from a single row +//| :param int y: The top edge of the area +//| :param bytearray buffer: The buffer in which to place the pixel data""" +//| ... //| -//| :param int y: The top edge of the area -//| :param bytearray buffer: The buffer in which to place the pixel data STATIC mp_obj_t framebufferio_framebufferdisplay_obj_fill_row(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_y, ARG_buffer }; static const mp_arg_t allowed_args[] = { diff --git a/shared-bindings/framebufferio/__init__.c b/shared-bindings/framebufferio/__init__.c index 88f69bb2c..50725c515 100644 --- a/shared-bindings/framebufferio/__init__.c +++ b/shared-bindings/framebufferio/__init__.c @@ -28,7 +28,7 @@ #include "shared-bindings/framebufferio/__init__.h" #include "shared-bindings/framebufferio/FramebufferDisplay.h" -//| :mod:`framebufferio` --- Native framebuffer display driving +//| """:mod:`framebufferio` --- Native framebuffer display driving //| ========================================================================= //| //| .. module:: framebufferio @@ -46,7 +46,7 @@ //| .. toctree:: //| :maxdepth: 3 //| -//| FramebufferDisplay +//| FramebufferDisplay""" //| #if CIRCUITPY_FRAMEBUFFERIO diff --git a/shared-bindings/frequencyio/FrequencyIn.c b/shared-bindings/frequencyio/FrequencyIn.c index 6743f8706..270fa87c3 100644 --- a/shared-bindings/frequencyio/FrequencyIn.c +++ b/shared-bindings/frequencyio/FrequencyIn.c @@ -35,43 +35,44 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: frequencyio +//| class FrequencyIn: +//| """.. currentmodule:: frequencyio //| -//| :class:`FrequencyIn` -- Read a frequency signal -//| ======================================================== +//| :class:`FrequencyIn` -- Read a frequency signal +//| ======================================================== //| -//| FrequencyIn is used to measure the frequency, in hertz, of a digital signal -//| on an incoming pin. Accuracy has shown to be within 10%, if not better. It -//| is recommended to utilize an average of multiple samples to smooth out readings. +//| FrequencyIn is used to measure the frequency, in hertz, of a digital signal +//| on an incoming pin. Accuracy has shown to be within 10%, if not better. It +//| is recommended to utilize an average of multiple samples to smooth out readings. //| -//| Frequencies below 1KHz are not currently detectable. +//| Frequencies below 1KHz are not currently detectable. //| -//| FrequencyIn will not determine pulse width (use ``PulseIn``). +//| FrequencyIn will not determine pulse width (use ``PulseIn``).""" //| -//| .. class:: FrequencyIn(pin, capture_period=10) +//| def __init__(self, pin: microcontroller.Pin, capture_period: int = 10): +//| """Create a FrequencyIn object associated with the given pin. //| -//| Create a FrequencyIn object associated with the given pin. +//| :param ~microcontroller.Pin pin: Pin to read frequency from. +//| :param int capture_period: Keyword argument to set the measurement period, in +//| milliseconds. Default is 10ms; range is 1ms - 500ms. //| -//| :param ~microcontroller.Pin pin: Pin to read frequency from. -//| :param int capture_period: Keyword argument to set the measurement period, in -//| milliseconds. Default is 10ms; range is 1ms - 500ms. +//| Read the incoming frequency from a pin:: //| -//| Read the incoming frequency from a pin:: +//| import frequencyio +//| import board //| -//| import frequencyio -//| import board +//| frequency = frequencyio.FrequencyIn(board.D11) //| -//| frequency = frequencyio.FrequencyIn(board.D11) +//| # Loop while printing the detected frequency +//| while True: +//| print(frequency.value) //| -//| # Loop while printing the detected frequency -//| while True: -//| print(frequency.value) -//| -//| # Optional clear() will reset the value -//| # to zero. Without this, if the incoming -//| # signal stops, the last reading will remain -//| # as the value. -//| frequency.clear() +//| # Optional clear() will reset the value +//| # to zero. Without this, if the incoming +//| # signal stops, the last reading will remain +//| # as the value. +//| frequency.clear()""" +//| ... //| STATIC mp_obj_t frequencyio_frequencyin_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { @@ -96,9 +97,9 @@ STATIC mp_obj_t frequencyio_frequencyin_make_new(const mp_obj_type_t *type, size return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the FrequencyIn and releases any hardware resources for reuse. +//| def deinit(self, ) -> Any: +//| """Deinitialises the FrequencyIn and releases any hardware resources for reuse.""" +//| ... //| STATIC mp_obj_t frequencyio_frequencyin_deinit(mp_obj_t self_in) { frequencyio_frequencyin_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -113,16 +114,16 @@ STATIC void check_for_deinit(frequencyio_frequencyin_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t frequencyio_frequencyin_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -131,9 +132,9 @@ STATIC mp_obj_t frequencyio_frequencyin_obj___exit__(size_t n_args, const mp_obj } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(frequencyio_frequencyin___exit___obj, 4, 4, frequencyio_frequencyin_obj___exit__); -//| .. method:: pause() -//| -//| Pause frequency capture. +//| def pause(self, ) -> Any: +//| """Pause frequency capture.""" +//| ... //| STATIC mp_obj_t frequencyio_frequencyin_obj_pause(mp_obj_t self_in) { frequencyio_frequencyin_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -144,9 +145,9 @@ STATIC mp_obj_t frequencyio_frequencyin_obj_pause(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(frequencyio_frequencyin_pause_obj, frequencyio_frequencyin_obj_pause); -//| .. method:: resume() -//| -//| Resumes frequency capture. +//| def resume(self, ) -> Any: +//| """Resumes frequency capture.""" +//| ... //| STATIC mp_obj_t frequencyio_frequencyin_obj_resume(mp_obj_t self_in) { frequencyio_frequencyin_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -157,9 +158,9 @@ STATIC mp_obj_t frequencyio_frequencyin_obj_resume(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(frequencyio_frequencyin_resume_obj, frequencyio_frequencyin_obj_resume); -//| .. method:: clear() -//| -//| Clears the last detected frequency capture value. +//| def clear(self, ) -> Any: +//| """Clears the last detected frequency capture value.""" +//| ... //| STATIC mp_obj_t frequencyio_frequencyin_obj_clear(mp_obj_t self_in) { @@ -171,14 +172,13 @@ STATIC mp_obj_t frequencyio_frequencyin_obj_clear(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(frequencyio_frequencyin_clear_obj, frequencyio_frequencyin_obj_clear); -//| .. attribute:: capture_period -//| -//| The capture measurement period. Lower incoming frequencies will be measured +//| capture_period: Any = ... +//| """The capture measurement period. Lower incoming frequencies will be measured //| more accurately with longer capture periods. Higher frequencies are more //| accurate with shorter capture periods. //| -//| .. note:: When setting a new ``capture_period``, all previous capture information is -//| cleared with a call to ``clear()``. +//| .. note:: When setting a new ``capture_period``, all previous capture information is +//| cleared with a call to ``clear()``.""" //| STATIC mp_obj_t frequencyio_frequencyin_obj_get_capture_period(mp_obj_t self_in) { frequencyio_frequencyin_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -204,9 +204,9 @@ const mp_obj_property_t frequencyio_frequencyin_capture_period_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: __get__(index) -//| -//| Returns the value of the last frequency captured. +//| def __get__(self, index: Any) -> Any: +//| """Returns the value of the last frequency captured.""" +//| ... //| STATIC mp_obj_t frequencyio_frequencyin_obj_get_value(mp_obj_t self_in) { frequencyio_frequencyin_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/frequencyio/__init__.c b/shared-bindings/frequencyio/__init__.c index 48a026824..219d5f645 100644 --- a/shared-bindings/frequencyio/__init__.c +++ b/shared-bindings/frequencyio/__init__.c @@ -33,7 +33,7 @@ #include "shared-bindings/frequencyio/__init__.h" #include "shared-bindings/frequencyio/FrequencyIn.h" -//| :mod:`frequencyio` --- Support for frequency based protocols +//| """:mod:`frequencyio` --- Support for frequency based protocols //| ============================================================= //| //| .. module:: frequencyio @@ -73,7 +73,7 @@ //| :py:data:`~frequencyio.FrequencyIn.capture_period`, and then sleep 0.1 seconds. //| CircuitPython will automatically turn off FrequencyIn capture when it resets all //| hardware after program completion. Use ``deinit()`` or a ``with`` statement -//| to do it yourself. +//| to do it yourself.""" //| STATIC const mp_rom_map_elem_t frequencyio_module_globals_table[] = { -- cgit v1.2.3 From 4f33a20d17c7b7688e5dd1ee37346ff2d4f4a340 Mon Sep 17 00:00:00 2001 From: dherrada Date: Thu, 7 May 2020 15:10:44 -0400 Subject: Added gamepad, gamepadshift, and i2cslave --- shared-bindings/gamepad/GamePad.c | 110 +++++++++++----------- shared-bindings/gamepad/__init__.c | 4 +- shared-bindings/gamepadshift/GamePadShift.c | 41 +++++---- shared-bindings/gamepadshift/__init__.c | 4 +- shared-bindings/i2cslave/I2CSlave.c | 138 ++++++++++++++-------------- shared-bindings/i2cslave/__init__.c | 4 +- 6 files changed, 149 insertions(+), 152 deletions(-) diff --git a/shared-bindings/gamepad/GamePad.c b/shared-bindings/gamepad/GamePad.c index d3c29019a..946a24dbf 100644 --- a/shared-bindings/gamepad/GamePad.c +++ b/shared-bindings/gamepad/GamePad.c @@ -34,65 +34,65 @@ #include "shared-bindings/digitalio/DigitalInOut.h" #include "supervisor/shared/translate.h" - -//| .. currentmodule:: gamepad +//| class GamePad: +//| """.. currentmodule:: gamepad //| -//| :class:`GamePad` -- Scan buttons for presses -//| ============================================ +//| :class:`GamePad` -- Scan buttons for presses +//| ============================================ //| -//| Usage:: +//| Usage:: //| -//| import board -//| import digitalio -//| import gamepad -//| import time +//| import board +//| import digitalio +//| import gamepad +//| import time //| -//| B_UP = 1 << 0 -//| B_DOWN = 1 << 1 +//| B_UP = 1 << 0 +//| B_DOWN = 1 << 1 //| //| -//| pad = gamepad.GamePad( -//| digitalio.DigitalInOut(board.D10), -//| digitalio.DigitalInOut(board.D11), -//| ) +//| pad = gamepad.GamePad( +//| digitalio.DigitalInOut(board.D10), +//| digitalio.DigitalInOut(board.D11), +//| ) //| -//| y = 0 -//| while True: -//| buttons = pad.get_pressed() -//| if buttons & B_UP: -//| y -= 1 -//| print(y) -//| elif buttons & B_DOWN: -//| y += 1 -//| print(y) -//| time.sleep(0.1) -//| while buttons: -//| # Wait for all buttons to be released. +//| y = 0 +//| while True: //| buttons = pad.get_pressed() +//| if buttons & B_UP: +//| y -= 1 +//| print(y) +//| elif buttons & B_DOWN: +//| y += 1 +//| print(y) //| time.sleep(0.1) +//| while buttons: +//| # Wait for all buttons to be released. +//| buttons = pad.get_pressed() +//| time.sleep(0.1)""" //| -//| .. class:: GamePad([b1[, b2[, b3[, b4[, b5[, b6[, b7[, b8]]]]]]]]) -//| -//| Initializes button scanning routines. -//| -//| The ``b1``-``b8`` parameters are ``DigitalInOut`` objects, which -//| immediately get switched to input with a pull-up, (unless they already -//| were set to pull-down, in which case they remain so), and then scanned -//| regularly for button presses. The order is the same as the order of -//| bits returned by the ``get_pressed`` function. You can re-initialize -//| it with different keys, then the new object will replace the previous -//| one. -//| -//| The basic feature required here is the ability to poll the keys at -//| regular intervals (so that de-bouncing is consistent) and fast enough -//| (so that we don't miss short button presses) while at the same time -//| letting the user code run normally, call blocking functions and wait -//| on delays. -//| -//| They button presses are accumulated, until the ``get_pressed`` method -//| is called, at which point the button state is cleared, and the new -//| button presses start to be recorded. +//| def __init__(self, b1: Any, b2: Any, b3: Any, b4: Any, b5: Any, b6: Any, b7: Any, b8: Any): +//| """Initializes button scanning routines. +//| +//| The ``b1``-``b8`` parameters are ``DigitalInOut`` objects, which +//| immediately get switched to input with a pull-up, (unless they already +//| were set to pull-down, in which case they remain so), and then scanned +//| regularly for button presses. The order is the same as the order of +//| bits returned by the ``get_pressed`` function. You can re-initialize +//| it with different keys, then the new object will replace the previous +//| one. +//| +//| The basic feature required here is the ability to poll the keys at +//| regular intervals (so that de-bouncing is consistent) and fast enough +//| (so that we don't miss short button presses) while at the same time +//| letting the user code run normally, call blocking functions and wait +//| on delays. +//| +//| They button presses are accumulated, until the ``get_pressed`` method +//| is called, at which point the button state is cleared, and the new +//| button presses start to be recorded.""" +//| ... //| STATIC mp_obj_t gamepad_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { @@ -114,15 +114,15 @@ STATIC mp_obj_t gamepad_make_new(const mp_obj_type_t *type, size_t n_args, return MP_OBJ_FROM_PTR(gamepad_singleton); } -//| .. method:: get_pressed() -//| -//| Get the status of buttons pressed since the last call and clear it. +//| def get_pressed(self, ) -> Any: +//| """Get the status of buttons pressed since the last call and clear it. //| //| Returns an 8-bit number, with bits that correspond to buttons, //| which have been pressed (or held down) since the last call to this //| function set to 1, and the remaining bits set to 0. Then it clears //| the button state, so that new button presses (or buttons that are -//| held down) can be recorded for the next call. +//| held down) can be recorded for the next call.""" +//| ... //| STATIC mp_obj_t gamepad_get_pressed(mp_obj_t self_in) { gamepad_obj_t* gamepad_singleton = MP_STATE_VM(gamepad_singleton); @@ -133,9 +133,9 @@ STATIC mp_obj_t gamepad_get_pressed(mp_obj_t self_in) { MP_DEFINE_CONST_FUN_OBJ_1(gamepad_get_pressed_obj, gamepad_get_pressed); -//| .. method:: deinit() -//| -//| Disable button scanning. +//| def deinit(self, ) -> Any: +//| """Disable button scanning.""" +//| ... //| STATIC mp_obj_t gamepad_deinit(mp_obj_t self_in) { common_hal_gamepad_gamepad_deinit(self_in); diff --git a/shared-bindings/gamepad/__init__.c b/shared-bindings/gamepad/__init__.c index cea0b4ee9..0c32fd6c1 100644 --- a/shared-bindings/gamepad/__init__.c +++ b/shared-bindings/gamepad/__init__.c @@ -29,7 +29,7 @@ #include "shared-bindings/gamepad/GamePad.h" #include "shared-bindings/util.h" -//| :mod:`gamepad` --- Button handling +//| """:mod:`gamepad` --- Button handling //| ================================== //| //| .. module:: gamepad @@ -39,7 +39,7 @@ //| .. toctree:: //| :maxdepth: 3 //| -//| GamePad +//| GamePad""" //| STATIC const mp_rom_map_elem_t gamepad_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_gamepad) }, diff --git a/shared-bindings/gamepadshift/GamePadShift.c b/shared-bindings/gamepadshift/GamePadShift.c index 91203ad20..37be3d957 100644 --- a/shared-bindings/gamepadshift/GamePadShift.c +++ b/shared-bindings/gamepadshift/GamePadShift.c @@ -32,24 +32,25 @@ #include "shared-bindings/gamepadshift/__init__.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: gamepadshift +//| class GamePadShift: +//| """.. currentmodule:: gamepadshift //| -//| :class:`GamePadShift` -- Scan buttons for presses through a shift register -//| =========================================================================== +//| :class:`GamePadShift` -- Scan buttons for presses through a shift register +//| ===========================================================================""" //| -//| .. class:: GamePadShift(clock, data, latch) +//| def __init__(self, clock: Any, data: Any, latch: Any): +//| """Initializes button scanning routines. //| -//| Initializes button scanning routines. +//| The ``clock``, ``data`` and ``latch`` parameters are ``DigitalInOut`` +//| objects connected to the shift register controlling the buttons. //| -//| The ``clock``, ``data`` and ``latch`` parameters are ``DigitalInOut`` -//| objects connected to the shift register controlling the buttons. +//| They button presses are accumulated, until the ``get_pressed`` method +//| is called, at which point the button state is cleared, and the new +//| button presses start to be recorded. //| -//| They button presses are accumulated, until the ``get_pressed`` method -//| is called, at which point the button state is cleared, and the new -//| button presses start to be recorded. -//| -//| Only one gamepad (`gamepad.GamePad` or `gamepadshift.GamePadShift`) -//| may be used at a time. +//| Only one gamepad (`gamepad.GamePad` or `gamepadshift.GamePadShift`) +//| may be used at a time.""" +//| ... //| STATIC mp_obj_t gamepadshift_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { @@ -81,15 +82,15 @@ STATIC mp_obj_t gamepadshift_make_new(const mp_obj_type_t *type, size_t n_args, return MP_OBJ_FROM_PTR(gamepad_singleton); } -//| .. method:: get_pressed() -//| -//| Get the status of buttons pressed since the last call and clear it. +//| def get_pressed(self, ) -> Any: +//| """Get the status of buttons pressed since the last call and clear it. //| //| Returns an 8-bit number, with bits that correspond to buttons, //| which have been pressed (or held down) since the last call to this //| function set to 1, and the remaining bits set to 0. Then it clears //| the button state, so that new button presses (or buttons that are -//| held down) can be recorded for the next call. +//| held down) can be recorded for the next call.""" +//| ... //| STATIC mp_obj_t gamepadshift_get_pressed(mp_obj_t self_in) { gamepadshift_obj_t* gamepad_singleton = MP_STATE_VM(gamepad_singleton); @@ -99,9 +100,9 @@ STATIC mp_obj_t gamepadshift_get_pressed(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(gamepadshift_get_pressed_obj, gamepadshift_get_pressed); -//| .. method:: deinit() -//| -//| Disable button scanning. +//| def deinit(self, ) -> Any: +//| """Disable button scanning.""" +//| ... //| STATIC mp_obj_t gamepadshift_deinit(mp_obj_t self_in) { common_hal_gamepadshift_gamepadshift_deinit(self_in); diff --git a/shared-bindings/gamepadshift/__init__.c b/shared-bindings/gamepadshift/__init__.c index 2d3667726..3763b0487 100644 --- a/shared-bindings/gamepadshift/__init__.c +++ b/shared-bindings/gamepadshift/__init__.c @@ -30,7 +30,7 @@ #include "shared-bindings/digitalio/DigitalInOut.h" #include "shared-bindings/util.h" -//| :mod:`gamepadshift` --- Tracks button presses read through a shift register +//| """:mod:`gamepadshift` --- Tracks button presses read through a shift register //| =========================================================================== //| //| .. module:: gamepadshift @@ -40,7 +40,7 @@ //| .. toctree:: //| :maxdepth: 3 //| -//| GamePadShift +//| GamePadShift""" //| STATIC const mp_rom_map_elem_t gamepadshift_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_gamepadshift) }, diff --git a/shared-bindings/i2cslave/I2CSlave.c b/shared-bindings/i2cslave/I2CSlave.c index e28eb3f25..5bab2af74 100644 --- a/shared-bindings/i2cslave/I2CSlave.c +++ b/shared-bindings/i2cslave/I2CSlave.c @@ -49,20 +49,21 @@ STATIC mp_obj_t mp_obj_new_i2cslave_i2c_slave_request(i2cslave_i2c_slave_obj_t * return (mp_obj_t)self; } -//| .. currentmodule:: i2cslave +//| class I2CSlave: +//| """.. currentmodule:: i2cslave //| -//| :class:`I2CSlave` --- Two wire serial protocol slave -//| ---------------------------------------------------- +//| :class:`I2CSlave` --- Two wire serial protocol slave +//| ----------------------------------------------------""" //| -//| .. class:: I2CSlave(scl, sda, addresses, smbus=False) +//| def __init__(self, scl: microcontroller.Pin, sda: microcontroller.Pin, addresses: tuple, smbus: bool = False): +//| """I2C is a two-wire protocol for communicating between devices. +//| This implements the slave side. //| -//| I2C is a two-wire protocol for communicating between devices. -//| This implements the slave side. -//| -//| :param ~microcontroller.Pin scl: The clock pin -//| :param ~microcontroller.Pin sda: The data pin -//| :param tuple addresses: The I2C addresses to respond to (how many is hw dependent). -//| :param bool smbus: Use SMBUS timings if the hardware supports it +//| :param ~microcontroller.Pin scl: The clock pin +//| :param ~microcontroller.Pin sda: The data pin +//| :param tuple addresses: The I2C addresses to respond to (how many is hw dependent). +//| :param bool smbus: Use SMBUS timings if the hardware supports it""" +//| ... //| STATIC mp_obj_t i2cslave_i2c_slave_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { i2cslave_i2c_slave_obj_t *self = m_new_obj(i2cslave_i2c_slave_obj_t); @@ -104,9 +105,9 @@ STATIC mp_obj_t i2cslave_i2c_slave_make_new(const mp_obj_type_t *type, size_t n_ return (mp_obj_t)self; } -//| .. method:: deinit() -//| -//| Releases control of the underlying hardware so other classes can use it. +//| def deinit(self, ) -> Any: +//| """Releases control of the underlying hardware so other classes can use it.""" +//| ... //| STATIC mp_obj_t i2cslave_i2c_slave_obj_deinit(mp_obj_t self_in) { mp_check_self(MP_OBJ_IS_TYPE(self_in, &i2cslave_i2c_slave_type)); @@ -116,16 +117,16 @@ STATIC mp_obj_t i2cslave_i2c_slave_obj_deinit(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(i2cslave_i2c_slave_deinit_obj, i2cslave_i2c_slave_obj_deinit); -//| .. method:: __enter__() -//| -//| No-op used in Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used in Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware on context exit. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware on context exit. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t i2cslave_i2c_slave_obj___exit__(size_t n_args, const mp_obj_t *args) { mp_check_self(MP_OBJ_IS_TYPE(args[0], &i2cslave_i2c_slave_type)); @@ -135,13 +136,12 @@ STATIC mp_obj_t i2cslave_i2c_slave_obj___exit__(size_t n_args, const mp_obj_t *a } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(i2cslave_i2c_slave___exit___obj, 4, 4, i2cslave_i2c_slave_obj___exit__); -//| .. method:: request(timeout=-1) +//| def request(self, timeout: float = -1) -> Any: +//| """Wait for an I2C request from a master. //| -//| Wait for an I2C request from a master. -//| -//| :param float timeout: Timeout in seconds. Zero means wait forever, a negative value means check once -//| :return: I2C Slave Request or None if timeout=-1 and there's no request -//| :rtype: ~i2cslave.I2CSlaveRequest +//| :param float timeout: Timeout in seconds. Zero means wait forever, a negative value means check once +//| :return: I2C Slave Request or None if timeout=-1 and there's no request +//| :rtype: ~i2cslave.I2CSlaveRequest""" //| STATIC mp_obj_t i2cslave_i2c_slave_request(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { mp_check_self(MP_OBJ_IS_TYPE(pos_args[0], &i2cslave_i2c_slave_type)); @@ -228,34 +228,33 @@ const mp_obj_type_t i2cslave_i2c_slave_type = { .locals_dict = (mp_obj_dict_t*)&i2cslave_i2c_slave_locals_dict, }; - -//| :class:`I2CSlaveRequest` --- I2C Slave Request -//| ---------------------------------------------- +//| class I2CSlaveRequest: +//| """:class:`I2CSlaveRequest` --- I2C Slave Request +//| ----------------------------------------------""" //| -//| .. class:: I2CSlaveRequest(slave, address, is_read, is_restart) +//| def __init__(self, slave: i2cslave.I2CSlave, address: int, is_read: bool, is_restart: bool): +//| """I2C transfer request from a master. +//| This cannot be instantiated directly, but is returned by :py:meth:`I2CSlave.request`. //| -//| I2C transfer request from a master. -//| This cannot be instantiated directly, but is returned by :py:meth:`I2CSlave.request`. -//| -//| :param ~i2cslave.I2CSlave slave: The I2C Slave receiving this request -//| :param int address: I2C address -//| :param bool is_read: I2C Master read request -//| :param bool is_restart: Repeated Start Condition +//| :param ~i2cslave.I2CSlave slave: The I2C Slave receiving this request +//| :param int address: I2C address +//| :param bool is_read: I2C Master read request +//| :param bool is_restart: Repeated Start Condition""" //| STATIC mp_obj_t i2cslave_i2c_slave_request_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 4, 4, false); return mp_obj_new_i2cslave_i2c_slave_request(args[0], mp_obj_get_int(args[1]), mp_obj_is_true(args[2]), mp_obj_is_true(args[3])); } -//| .. method:: __enter__() -//| -//| No-op used in Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used in Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Close the request. +//| def __exit__(self, ) -> Any: +//| """Close the request.""" +//| ... //| STATIC mp_obj_t i2cslave_i2c_slave_request_obj___exit__(size_t n_args, const mp_obj_t *args) { mp_check_self(MP_OBJ_IS_TYPE(args[0], &i2cslave_i2c_slave_request_type)); @@ -265,9 +264,8 @@ STATIC mp_obj_t i2cslave_i2c_slave_request_obj___exit__(size_t n_args, const mp_ } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(i2cslave_i2c_slave_request___exit___obj, 4, 4, i2cslave_i2c_slave_request_obj___exit__); -//| .. attribute:: address -//| -//| The I2C address of the request. +//| address: Any = ... +//| """The I2C address of the request.""" //| STATIC mp_obj_t i2cslave_i2c_slave_request_get_address(mp_obj_t self_in) { mp_check_self(MP_OBJ_IS_TYPE(self_in, &i2cslave_i2c_slave_request_type)); @@ -276,9 +274,8 @@ STATIC mp_obj_t i2cslave_i2c_slave_request_get_address(mp_obj_t self_in) { } MP_DEFINE_CONST_PROP_GET(i2cslave_i2c_slave_request_address_obj, i2cslave_i2c_slave_request_get_address); -//| .. attribute:: is_read -//| -//| The I2C master is reading from the device. +//| is_read: Any = ... +//| """The I2C master is reading from the device.""" //| STATIC mp_obj_t i2cslave_i2c_slave_request_get_is_read(mp_obj_t self_in) { mp_check_self(MP_OBJ_IS_TYPE(self_in, &i2cslave_i2c_slave_request_type)); @@ -287,9 +284,8 @@ STATIC mp_obj_t i2cslave_i2c_slave_request_get_is_read(mp_obj_t self_in) { } MP_DEFINE_CONST_PROP_GET(i2cslave_i2c_slave_request_is_read_obj, i2cslave_i2c_slave_request_get_is_read); -//| .. attribute:: is_restart -//| -//| Is Repeated Start Condition. +//| is_restart: Any = ... +//| """Is Repeated Start Condition.""" //| STATIC mp_obj_t i2cslave_i2c_slave_request_get_is_restart(mp_obj_t self_in) { mp_check_self(MP_OBJ_IS_TYPE(self_in, &i2cslave_i2c_slave_request_type)); @@ -298,15 +294,15 @@ STATIC mp_obj_t i2cslave_i2c_slave_request_get_is_restart(mp_obj_t self_in) { } MP_DEFINE_CONST_PROP_GET(i2cslave_i2c_slave_request_is_restart_obj, i2cslave_i2c_slave_request_get_is_restart); -//| .. method:: read(n=-1, ack=True) +//| def read(self, n: int = -1, ack: bool = True) -> Any: +//| """Read data. +//| If ack=False, the caller is responsible for calling :py:meth:`I2CSlaveRequest.ack`. //| -//| Read data. -//| If ack=False, the caller is responsible for calling :py:meth:`I2CSlaveRequest.ack`. -//| -//| :param int n: Number of bytes to read (negative means all) -//| :param bool ack: Whether or not to send an ACK after the n'th byte -//| :return: Bytes read -//| :rtype: bytearray +//| :param int n: Number of bytes to read (negative means all) +//| :param bool ack: Whether or not to send an ACK after the n'th byte +//| :return: Bytes read +//| :rtype: bytearray""" +//| ... //| STATIC mp_obj_t i2cslave_i2c_slave_request_read(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { mp_check_self(MP_OBJ_IS_TYPE(pos_args[0], &i2cslave_i2c_slave_request_type)); @@ -359,12 +355,12 @@ STATIC mp_obj_t i2cslave_i2c_slave_request_read(size_t n_args, const mp_obj_t *p } MP_DEFINE_CONST_FUN_OBJ_KW(i2cslave_i2c_slave_request_read_obj, 1, i2cslave_i2c_slave_request_read); -//| .. method:: write(buffer) -//| -//| Write the data contained in buffer. +//| def write(self, buffer: bytearray) -> Any: +//| """Write the data contained in buffer. //| -//| :param bytearray buffer: Write out the data in this buffer -//| :return: Number of bytes written +//| :param bytearray buffer: Write out the data in this buffer +//| :return: Number of bytes written""" +//| ... //| STATIC mp_obj_t i2cslave_i2c_slave_request_write(mp_obj_t self_in, mp_obj_t buf_in) { mp_check_self(MP_OBJ_IS_TYPE(self_in, &i2cslave_i2c_slave_request_type)); @@ -393,12 +389,12 @@ STATIC mp_obj_t i2cslave_i2c_slave_request_write(mp_obj_t self_in, mp_obj_t buf_ } STATIC MP_DEFINE_CONST_FUN_OBJ_2(i2cslave_i2c_slave_request_write_obj, i2cslave_i2c_slave_request_write); -//| .. method:: ack(ack=True) -//| -//| Acknowledge or Not Acknowledge last byte received. -//| Use together with :py:meth:`I2CSlaveRequest.read` ack=False. +//| def ack(self, ack: bool = True) -> Any: +//| """Acknowledge or Not Acknowledge last byte received. +//| Use together with :py:meth:`I2CSlaveRequest.read` ack=False. //| -//| :param bool ack: Whether to send an ACK or NACK +//| :param bool ack: Whether to send an ACK or NACK""" +//| ... //| STATIC mp_obj_t i2cslave_i2c_slave_request_ack(uint n_args, const mp_obj_t *args) { mp_check_self(MP_OBJ_IS_TYPE(args[0], &i2cslave_i2c_slave_request_type)); diff --git a/shared-bindings/i2cslave/__init__.c b/shared-bindings/i2cslave/__init__.c index 1c692e54e..ffeb216fa 100644 --- a/shared-bindings/i2cslave/__init__.c +++ b/shared-bindings/i2cslave/__init__.c @@ -35,7 +35,7 @@ #include "py/runtime.h" -//| :mod:`i2cslave` --- Two wire serial protocol slave +//| """:mod:`i2cslave` --- Two wire serial protocol slave //| ================================================== //| //| .. module:: i2cslave @@ -101,7 +101,7 @@ //| //| Raspberry Pi in particular does not support this with its I2C hw block. //| This can be worked around by using the ``i2c-gpio`` bit banging driver. -//| Since the RPi firmware uses the hw i2c, it's not possible to emulate a HAT eeprom. +//| Since the RPi firmware uses the hw i2c, it's not possible to emulate a HAT eeprom.""" //| STATIC const mp_rom_map_elem_t i2cslave_module_globals_table[] = { -- cgit v1.2.3 From e31e9eeaa1e1dad1bd2243b7be76012aa2ee64b8 Mon Sep 17 00:00:00 2001 From: dherrada Date: Thu, 7 May 2020 15:59:52 -0400 Subject: Did math, microcontroller, and multiterminal --- shared-bindings/math/__init__.c | 164 ++++++++++++++-------------- shared-bindings/microcontroller/Pin.c | 19 ++-- shared-bindings/microcontroller/Processor.c | 49 ++++----- shared-bindings/microcontroller/RunMode.c | 37 +++---- shared-bindings/microcontroller/__init__.c | 78 +++++++------ shared-bindings/multiterminal/__init__.c | 32 +++--- 6 files changed, 184 insertions(+), 195 deletions(-) diff --git a/shared-bindings/math/__init__.c b/shared-bindings/math/__init__.c index 0bf8047c9..755bf7589 100644 --- a/shared-bindings/math/__init__.c +++ b/shared-bindings/math/__init__.c @@ -38,7 +38,7 @@ #define MP_PI MICROPY_FLOAT_CONST(3.14159265358979323846) -//| :mod:`math` --- mathematical functions +//| """:mod:`math` --- mathematical functions //| ======================================================== //| //| .. module:: math @@ -46,7 +46,7 @@ //| :platform: SAMD21/SAMD51 //| //| The `math` module provides some basic mathematical functions for -//| working with floating-point numbers. +//| working with floating-point numbers.""" //| STATIC NORETURN void math_error(void) { @@ -86,117 +86,113 @@ STATIC NORETURN void math_error(void) { //| Constants //| --------- //| - //| .. data:: e + //| e: Any = ... + //| """base of the natural logarithm""" //| - //| base of the natural logarithm - //| - //| .. data:: pi - //| - //| the ratio of a circle's circumference to its diameter + //| pi: Any = ... + //| """the ratio of a circle's circumference to its diameter""" //| //| Functions //| --------- //| - //| .. function:: acos(x) - //| - //| Return the inverse cosine of ``x``. - //| - //| .. function:: asin(x) - //| - //| Return the inverse sine of ``x``. - //| - //| .. function:: atan(x) - //| - //| Return the inverse tangent of ``x``. - //| - //| .. function:: atan2(y,x) - //| - //| Return the principal value of the inverse tangent of ``y/x``. - //| - //| .. function:: ceil(x) - //| - //| Return an integer, being ``x`` rounded towards positive infinity. - //| - //| .. function:: copysign(x,y) - //| - //| Return ``x`` with the sign of ``y``. - //| - //| .. function:: cos(x) - //| - //| Return the cosine of ``x``. - //| - //| .. function:: degrees(x) - //| - //| Return radians ``x`` converted to degrees. - //| - //| .. function:: exp(x) - //| - //| Return the exponential of ``x``. - //| - //| .. function:: fabs(x) - //| - //| Return the absolute value of ``x``. - //| - //| .. function:: floor(x) - //| - //| Return an integer, being ``x`` rounded towards negative infinity. - //| - //| .. function:: fmod(x,y) - //| - //| Return the remainder of ``x/y``. - //| - //| .. function:: frexp(x) + //| def acos(x: Any) -> Any: + //| """Return the inverse cosine of ``x``.""" + //| ... //| - //| Decomposes a floating-point number into its mantissa and exponent. - //| The returned value is the tuple ``(m, e)`` such that ``x == m * 2**e`` - //| exactly. If ``x == 0`` then the function returns ``(0.0, 0)``, otherwise - //| the relation ``0.5 <= abs(m) < 1`` holds. + //| def asin(x: Any) -> Any: + //| """Return the inverse sine of ``x``.""" + //| ... //| - //| .. function:: isfinite(x) + //| def atan(x: Any) -> Any: + //| """Return the inverse tangent of ``x``.""" + //| ... //| - //| Return ``True`` if ``x`` is finite. + //| def atan2(y: Any, x: Any) -> Any: + //| """Return the principal value of the inverse tangent of ``y/x``.""" + //| ... //| - //| .. function:: isinf(x) + //| def ceil(x: Any) -> Any: + //| """Return an integer, being ``x`` rounded towards positive infinity.""" + //| ... //| - //| Return ``True`` if ``x`` is infinite. + //| def copysign(x: Any, y: Any) -> Any: + //| """Return ``x`` with the sign of ``y``.""" + //| ... //| - //| .. function:: isnan(x) + //| def cos(x: Any) -> Any: + //| """Return the cosine of ``x``.""" + //| ... //| - //| Return ``True`` if ``x`` is not-a-number + //| def degrees(x: Any) -> Any: + //| """Return radians ``x`` converted to degrees.""" + //| ... //| - //| .. function:: ldexp(x, exp) + //| def exp(x: Any) -> Any: + //| """Return the exponential of ``x``.""" + //| ... //| - //| Return ``x * (2**exp)``. + //| def fabs(x: Any) -> Any: + //| """Return the absolute value of ``x``.""" + //| ... //| - //| .. function:: modf(x) + //| def floor(x: Any) -> Any: + //| """Return an integer, being ``x`` rounded towards negative infinity.""" + //| ... //| - //| Return a tuple of two floats, being the fractional and integral parts of - //| ``x``. Both return values have the same sign as ``x``. + //| def fmod(x: Any, y: Any) -> Any: + //| """Return the remainder of ``x/y``.""" + //| ... //| - //| .. function:: pow(x, y) + //| def frexp(x: Any) -> Any: + //| """Decomposes a floating-point number into its mantissa and exponent. + //| The returned value is the tuple ``(m, e)`` such that ``x == m * 2**e`` + //| exactly. If ``x == 0`` then the function returns ``(0.0, 0)``, otherwise + //| the relation ``0.5 <= abs(m) < 1`` holds.""" + //| ... //| - //| Returns ``x`` to the power of ``y``. + //| def isfinite(x: Any) -> Any: + //| """Return ``True`` if ``x`` is finite.""" + //| ... //| - //| .. function:: radians(x) + //| def isinf(x: Any) -> Any: + //| """Return ``True`` if ``x`` is infinite.""" + //| ... //| - //| Return degrees ``x`` converted to radians. + //| def isnan(x: Any) -> Any: + //| """Return ``True`` if ``x`` is not-a-number""" + //| ... //| - //| .. function:: sin(x) + //| def ldexp(x: Any, exp: Any) -> Any: + //| """Return ``x * (2**exp)``.""" + //| ... //| - //| Return the sine of ``x``. + //| def modf(x: Any) -> Any: + //| """Return a tuple of two floats, being the fractional and integral parts of + //| ``x``. Both return values have the same sign as ``x``.""" + //| ... //| - //| .. function:: sqrt(x) + //| def pow(x: Any, y: Any) -> Any: + //| """Returns ``x`` to the power of ``y``.""" //| - //| Returns the square root of ``x``. + //| def radians(x: Any) -> Any: + //| """Return degrees ``x`` converted to radians.""" //| - //| .. function:: tan(x) + //| def sin(x: Any) -> Any: + //| """Return the sine of ``x``.""" + //| ... //| - //| Return the tangent of ``x``. + //| def sqrt(x: Any) -> Any: + //| """Returns the square root of ``x``.""" + //| ... //| - //| .. function:: trunc(x) + //| def tan(x: Any) -> Any: ... + //| """Return the tangent of ``x``.""" + //| ... //| - //| Return an integer, being ``x`` rounded towards 0. + //| def trunc(x: Any) -> Any: + //| """Return an integer, being ``x`` rounded towards 0.""" + //| ... //| MATH_FUN_1_ERRCOND(sqrt, sqrt, (x < (mp_float_t)0.0)) diff --git a/shared-bindings/microcontroller/Pin.c b/shared-bindings/microcontroller/Pin.c index 67aecaf66..cad0d67b1 100644 --- a/shared-bindings/microcontroller/Pin.c +++ b/shared-bindings/microcontroller/Pin.c @@ -33,18 +33,19 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: microcontroller +//| class Pin: +//| """.. currentmodule:: microcontroller //| -//| :class:`Pin` --- Pin reference -//| ------------------------------------------ +//| :class:`Pin` --- Pin reference +//| ------------------------------------------ //| -//| Identifies an IO pin on the microcontroller. +//| Identifies an IO pin on the microcontroller.""" //| -//| .. class:: Pin() -//| -//| Identifies an IO pin on the microcontroller. They are fixed by the -//| hardware so they cannot be constructed on demand. Instead, use -//| `board` or `microcontroller.pin` to reference the desired pin. +//| def __init__(self, ): +//| """Identifies an IO pin on the microcontroller. They are fixed by the +//| hardware so they cannot be constructed on demand. Instead, use +//| `board` or `microcontroller.pin` to reference the desired pin.""" +//| ... //| static void get_pin_name(const mcu_pin_obj_t *self, qstr* package, qstr* module, qstr* name) { diff --git a/shared-bindings/microcontroller/Processor.c b/shared-bindings/microcontroller/Processor.c index 023f063e0..dedb5a27c 100644 --- a/shared-bindings/microcontroller/Processor.c +++ b/shared-bindings/microcontroller/Processor.c @@ -34,29 +34,29 @@ #include "py/runtime.h" -//| .. currentmodule:: microcontroller +//| class Processor: +//| """.. currentmodule:: microcontroller //| -//| :class:`Processor` --- Microcontroller CPU information and control -//| ------------------------------------------------------------------ +//| :class:`Processor` --- Microcontroller CPU information and control +//| ------------------------------------------------------------------ //| -//| Get information about the microcontroller CPU and control it. +//| Get information about the microcontroller CPU and control it. //| -//| Usage:: +//| Usage:: //| -//| import microcontroller -//| print(microcontroller.cpu.frequency) -//| print(microcontroller.cpu.temperature) +//| import microcontroller +//| print(microcontroller.cpu.frequency) +//| print(microcontroller.cpu.temperature)""" //| -//| .. class:: Processor() -//| -//| You cannot create an instance of `microcontroller.Processor`. -//| Use `microcontroller.cpu` to access the sole instance available. +//| def __init__(self, ): +//| """You cannot create an instance of `microcontroller.Processor`. +//| Use `microcontroller.cpu` to access the sole instance available.""" +//| ... //| -//| .. attribute:: frequency -//| -//| The CPU operating frequency as an `int`, in Hertz. (read-only) +//| frequency: Any = ... +//| """The CPU operating frequency as an `int`, in Hertz. (read-only)""" //| STATIC mp_obj_t mcu_processor_get_frequency(mp_obj_t self) { return mp_obj_new_int_from_uint(common_hal_mcu_processor_get_frequency()); @@ -72,11 +72,10 @@ const mp_obj_property_t mcu_processor_frequency_obj = { }, }; -//| .. attribute:: temperature -//| -//| The on-chip temperature, in Celsius, as a float. (read-only) +//| temperature: Any = ... +//| """The on-chip temperature, in Celsius, as a float. (read-only) //| -//| Is `None` if the temperature is not available. +//| Is `None` if the temperature is not available.""" //| STATIC mp_obj_t mcu_processor_get_temperature(mp_obj_t self) { float temperature = common_hal_mcu_processor_get_temperature(); @@ -93,9 +92,8 @@ const mp_obj_property_t mcu_processor_temperature_obj = { }, }; -//| .. attribute:: uid -//| -//| The unique id (aka serial number) of the chip as a `bytearray`. (read-only) +//| uid: Any = ... +//| """The unique id (aka serial number) of the chip as a `bytearray`. (read-only)""" //| STATIC mp_obj_t mcu_processor_get_uid(mp_obj_t self) { uint8_t raw_id[COMMON_HAL_MCU_PROCESSOR_UID_LENGTH]; @@ -113,11 +111,10 @@ const mp_obj_property_t mcu_processor_uid_obj = { }, }; -//| .. attribute:: voltage -//| -//| The input voltage to the microcontroller, as a float. (read-only) +//| voltage: Any = ... +//| """The input voltage to the microcontroller, as a float. (read-only) //| -//| Is `None` if the voltage is not available. +//| Is `None` if the voltage is not available.""" //| STATIC mp_obj_t mcu_processor_get_voltage(mp_obj_t self) { float voltage = common_hal_mcu_processor_get_voltage(); diff --git a/shared-bindings/microcontroller/RunMode.c b/shared-bindings/microcontroller/RunMode.c index 913242ad2..df3ff4186 100644 --- a/shared-bindings/microcontroller/RunMode.c +++ b/shared-bindings/microcontroller/RunMode.c @@ -26,34 +26,31 @@ #include "shared-bindings/microcontroller/RunMode.h" -//| .. currentmodule:: microcontroller +//| class RunMode: +//| """.. currentmodule:: microcontroller //| -//| :class:`RunMode` -- run state of the microcontroller -//| ============================================================= +//| :class:`RunMode` -- run state of the microcontroller +//| =============================================================""" //| -//| .. class:: RunMode() +//| def __init__(self, ): +//| """Enum-like class to define the run mode of the microcontroller and +//| CircuitPython.""" //| -//| Enum-like class to define the run mode of the microcontroller and -//| CircuitPython. +//| NORMAL: Any = ... +//| """Run CircuitPython as normal. //| -//| .. attribute:: NORMAL +//| :type microcontroller.RunMode:""" //| -//| Run CircuitPython as normal. +//| SAFE_MODE: Any = ... +//| """Run CircuitPython in safe mode. User code will not be run and the +//| file system will be writeable over USB. //| -//| :type microcontroller.RunMode: +//| :type microcontroller.RunMode:""" //| -//| .. attribute:: SAFE_MODE +//| BOOTLOADER: Any = ... +//| """Run the bootloader. //| -//| Run CircuitPython in safe mode. User code will not be run and the -//| file system will be writeable over USB. -//| -//| :type microcontroller.RunMode: -//| -//| .. attribute:: BOOTLOADER -//| -//| Run the bootloader. -//| -//| :type microcontroller.RunMode: +//| :type microcontroller.RunMode:""" //| const mp_obj_type_t mcu_runmode_type; diff --git a/shared-bindings/microcontroller/__init__.c b/shared-bindings/microcontroller/__init__.c index 090c4564d..75b763980 100644 --- a/shared-bindings/microcontroller/__init__.c +++ b/shared-bindings/microcontroller/__init__.c @@ -42,7 +42,7 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" -//| :mod:`microcontroller` --- Pin references and cpu functionality +//| """:mod:`microcontroller` --- Pin references and cpu functionality //| ================================================================ //| //| .. module:: microcontroller @@ -59,24 +59,23 @@ //| //| Pin //| Processor -//| RunMode +//| RunMode""" //| -//| .. data:: cpu -//| -//| CPU information and control, such as ``cpu.temperature`` and ``cpu.frequency`` -//| (clock frequency). -//| This object is the sole instance of `microcontroller.Processor`. +//| cpu: Any = ... +//| """CPU information and control, such as ``cpu.temperature`` and ``cpu.frequency`` +//| (clock frequency). +//| This object is the sole instance of `microcontroller.Processor`.""" //| -//| .. function:: delay_us(delay) -//| -//| Dedicated delay method used for very short delays. **Do not** do long delays -//| because this stops all other functions from completing. Think of this as an empty -//| ``while`` loop that runs for the specified ``(delay)`` time. If you have other -//| code or peripherals (e.g audio recording) that require specific timing or -//| processing while you are waiting, explore a different avenue such as using -//| `time.sleep()`. +//| def delay_us(delay: Any) -> Any: +//| """Dedicated delay method used for very short delays. **Do not** do long delays +//| because this stops all other functions from completing. Think of this as an empty +//| ``while`` loop that runs for the specified ``(delay)`` time. If you have other +//| code or peripherals (e.g audio recording) that require specific timing or +//| processing while you are waiting, explore a different avenue such as using +//| `time.sleep()`.""" +//| ... //| STATIC mp_obj_t mcu_delay_us(mp_obj_t delay_obj) { uint32_t delay = mp_obj_get_int(delay_obj); @@ -87,9 +86,9 @@ STATIC mp_obj_t mcu_delay_us(mp_obj_t delay_obj) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(mcu_delay_us_obj, mcu_delay_us); -//| .. function:: disable_interrupts() -//| -//| Disable all interrupts. Be very careful, this can stall everything. +//| def disable_interrupts() -> Any: +//| """Disable all interrupts. Be very careful, this can stall everything.""" +//| ... //| STATIC mp_obj_t mcu_disable_interrupts(void) { common_hal_mcu_disable_interrupts(); @@ -97,9 +96,9 @@ STATIC mp_obj_t mcu_disable_interrupts(void) { } STATIC MP_DEFINE_CONST_FUN_OBJ_0(mcu_disable_interrupts_obj, mcu_disable_interrupts); -//| .. function:: enable_interrupts() -//| -//| Enable the interrupts that were enabled at the last disable. +//| def enable_interrupts() -> Any: +//| """Enable the interrupts that were enabled at the last disable.""" +//| ... //| STATIC mp_obj_t mcu_enable_interrupts(void) { common_hal_mcu_enable_interrupts(); @@ -107,12 +106,12 @@ STATIC mp_obj_t mcu_enable_interrupts(void) { } STATIC MP_DEFINE_CONST_FUN_OBJ_0(mcu_enable_interrupts_obj, mcu_enable_interrupts); -//| .. function:: on_next_reset(run_mode) +//| def on_next_reset(run_mode: microcontroller.RunMode) -> Any: +//| """Configure the run mode used the next time the microcontroller is reset but +//| not powered down. //| -//| Configure the run mode used the next time the microcontroller is reset but -//| not powered down. -//| -//| :param ~microcontroller.RunMode run_mode: The next run mode +//| :param ~microcontroller.RunMode run_mode: The next run mode""" +//| ... //| STATIC mp_obj_t mcu_on_next_reset(mp_obj_t run_mode_obj) { mcu_runmode_t run_mode; @@ -132,14 +131,14 @@ STATIC mp_obj_t mcu_on_next_reset(mp_obj_t run_mode_obj) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(mcu_on_next_reset_obj, mcu_on_next_reset); -//| .. function:: reset() -//| -//| Reset the microcontroller. After reset, the microcontroller will enter the -//| run mode last set by `on_next_reset`. +//| def reset() -> Any: +//| """Reset the microcontroller. After reset, the microcontroller will enter the +//| run mode last set by `on_next_reset`. //| -//| .. warning:: This may result in file system corruption when connected to a -//| host computer. Be very careful when calling this! Make sure the device -//| "Safely removed" on Windows or "ejected" on Mac OSX and Linux. +//| .. warning:: This may result in file system corruption when connected to a +//| host computer. Be very careful when calling this! Make sure the device +//| "Safely removed" on Windows or "ejected" on Mac OSX and Linux.""" +//| ... //| STATIC mp_obj_t mcu_reset(void) { common_hal_mcu_reset(); @@ -148,22 +147,21 @@ STATIC mp_obj_t mcu_reset(void) { } STATIC MP_DEFINE_CONST_FUN_OBJ_0(mcu_reset_obj, mcu_reset); -//| .. data:: nvm -//| -//| Available non-volatile memory. -//| This object is the sole instance of `nvm.ByteArray` when available or ``None`` otherwise. +//| nvm: Any = ... +//| """Available non-volatile memory. +//| This object is the sole instance of `nvm.ByteArray` when available or ``None`` otherwise. //| -//| :type: nvm.ByteArray or None +//| :type: nvm.ByteArray or None""" //| -//| :mod:`microcontroller.pin` --- Microcontroller pin names +//| """:mod:`microcontroller.pin` --- Microcontroller pin names //| -------------------------------------------------------- //| //| .. module:: microcontroller.pin //| :synopsis: Microcontroller pin names //| :platform: SAMD21 //| -//| References to pins as named by the microcontroller +//| References to pins as named by the microcontroller""" //| const mp_obj_module_t mcu_pin_module = { .base = { &mp_type_module }, diff --git a/shared-bindings/multiterminal/__init__.c b/shared-bindings/multiterminal/__init__.c index 8de3c50d7..3a4065019 100644 --- a/shared-bindings/multiterminal/__init__.c +++ b/shared-bindings/multiterminal/__init__.c @@ -30,7 +30,7 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" -//| :mod:`multiterminal` --- Manage additional terminal sources +//| """:mod:`multiterminal` --- Manage additional terminal sources //| =========================================================== //| //| .. module:: multiterminal @@ -39,25 +39,25 @@ //| //| The `multiterminal` module allows you to configure an additional serial //| terminal source. Incoming characters are accepted from both the internal -//| serial connection and the optional secondary connection. +//| serial connection and the optional secondary connection.""" //| -//| .. function:: get_secondary_terminal() -//| -//| Returns the current secondary terminal. +//| def get_secondary_terminal() -> Any: +//| """Returns the current secondary terminal.""" +//| ... //| STATIC mp_obj_t multiterminal_obj_get_secondary_terminal() { return common_hal_multiterminal_get_secondary_terminal(); } MP_DEFINE_CONST_FUN_OBJ_0(multiterminal_get_secondary_terminal_obj, multiterminal_obj_get_secondary_terminal); -//| .. function:: set_secondary_terminal(stream) -//| -//| Read additional input from the given stream and write out back to it. +//| def set_secondary_terminal(stream: stream) -> Any: +//| """Read additional input from the given stream and write out back to it. //| This doesn't replace the core stream (usually UART or native USB) but is //| mixed in instead. //| -//| :param stream stream: secondary stream +//| :param stream stream: secondary stream""" +//| ... //| STATIC mp_obj_t multiterminal_obj_set_secondary_terminal(mp_obj_t secondary_terminal) { mp_obj_t write_m[3]; @@ -73,9 +73,9 @@ STATIC mp_obj_t multiterminal_obj_set_secondary_terminal(mp_obj_t secondary_term } MP_DEFINE_CONST_FUN_OBJ_1(multiterminal_set_secondary_terminal_obj, multiterminal_obj_set_secondary_terminal); -//| .. function:: clear_secondary_terminal() -//| -//| Clears the secondary terminal. +//| def clear_secondary_terminal() -> Any: +//| """Clears the secondary terminal.""" +//| ... //| STATIC mp_obj_t multiterminal_obj_clear_secondary_terminal() { common_hal_multiterminal_clear_secondary_terminal(); @@ -83,11 +83,11 @@ STATIC mp_obj_t multiterminal_obj_clear_secondary_terminal() { } MP_DEFINE_CONST_FUN_OBJ_0(multiterminal_clear_secondary_terminal_obj, multiterminal_obj_clear_secondary_terminal); -//| .. function:: schedule_secondary_terminal_read(socket) -//| -//| In cases where the underlying OS is doing task scheduling, this notifies +//| def schedule_secondary_terminal_read(socket: Any) -> Any: +//| """In cases where the underlying OS is doing task scheduling, this notifies //| the OS when more data is available on the socket to read. This is useful -//| as a callback for lwip sockets. +//| as a callback for lwip sockets.""" +//| ... //| // TODO(tannewt): This is a funny API. Replace it with a direct call into the OS // by the lwip object. -- cgit v1.2.3 From d750096befe2e6d23b1d0d4796306382cfbbb198 Mon Sep 17 00:00:00 2001 From: dherrada Date: Thu, 7 May 2020 18:40:46 -0400 Subject: Did neopixel, network, nvm --- shared-bindings/neopixel_write/__init__.c | 13 ++++++------ shared-bindings/network/__init__.c | 10 ++++----- shared-bindings/nvm/ByteArray.c | 34 +++++++++++++++++-------------- shared-bindings/nvm/__init__.c | 5 +++-- 4 files changed, 33 insertions(+), 29 deletions(-) diff --git a/shared-bindings/neopixel_write/__init__.c b/shared-bindings/neopixel_write/__init__.c index 1ee66337b..f18c7fdfd 100644 --- a/shared-bindings/neopixel_write/__init__.c +++ b/shared-bindings/neopixel_write/__init__.c @@ -31,7 +31,7 @@ #include "shared-bindings/digitalio/DigitalInOut.h" #include "supervisor/shared/translate.h" -//| :mod:`neopixel_write` --- Low-level neopixel implementation +//| """:mod:`neopixel_write` --- Low-level neopixel implementation //| =========================================================== //| //| .. module:: neopixel_write @@ -53,15 +53,14 @@ //| pin = digitalio.DigitalInOut(board.NEOPIXEL) //| pin.direction = digitalio.Direction.OUTPUT //| pixel_off = bytearray([0, 0, 0]) -//| neopixel_write.neopixel_write(pin, pixel_off) +//| neopixel_write.neopixel_write(pin, pixel_off)""" //| -//| .. function:: neopixel_write(digitalinout, buf) -//| -//| Write buf out on the given DigitalInOut. +//| def neopixel_write(digitalinout: digitalio.DigitalInOut, buf: bytearray) -> Any: +//| """Write buf out on the given DigitalInOut. //| //| :param ~digitalio.DigitalInOut digitalinout: the DigitalInOut to output with -//| :param bytearray buf: The bytes to clock out. No assumption is made about color order -//| +//| :param bytearray buf: The bytes to clock out. No assumption is made about color order""" +//| ... STATIC mp_obj_t neopixel_write_neopixel_write_(mp_obj_t digitalinout_obj, mp_obj_t buf) { if (!MP_OBJ_IS_TYPE(digitalinout_obj, &digitalio_digitalinout_type)) { mp_raise_TypeError_varg(translate("Expected a %q"), digitalio_digitalinout_type.name); diff --git a/shared-bindings/network/__init__.c b/shared-bindings/network/__init__.c index 01763a73c..4f03781cf 100644 --- a/shared-bindings/network/__init__.c +++ b/shared-bindings/network/__init__.c @@ -38,7 +38,7 @@ #if CIRCUITPY_NETWORK -//| :mod:`network` --- Network Interface Management +//| """:mod:`network` --- Network Interface Management //| =============================================== //| //| .. module:: network @@ -47,11 +47,11 @@ //| //| This module provides a registry of configured NICs. //| It is used by the 'socket' module to look up a suitable -//| NIC when a socket is created. +//| NIC when a socket is created.""" //| -//| .. function:: route() -//| -//| Returns a list of all configured NICs. +//| def route() -> Any: +//| """Returns a list of all configured NICs.""" +//| ... //| STATIC mp_obj_t network_route(void) { diff --git a/shared-bindings/nvm/ByteArray.c b/shared-bindings/nvm/ByteArray.c index 31bedeacc..a28c2c4f9 100644 --- a/shared-bindings/nvm/ByteArray.c +++ b/shared-bindings/nvm/ByteArray.c @@ -31,29 +31,33 @@ #include "shared-bindings/nvm/ByteArray.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: nvm + + + +//| class ByteArray: +//| """.. currentmodule:: nvm //| -//| :class:`ByteArray` -- Presents a stretch of non-volatile memory as a bytearray. -//| ================================================================================ +//| :class:`ByteArray` -- Presents a stretch of non-volatile memory as a bytearray. +//| ================================================================================ //| -//| Non-volatile memory is available as a byte array that persists over reloads -//| and power cycles. Each assignment causes an erase and write cycle so its recommended to assign -//| all values to change at once. +//| Non-volatile memory is available as a byte array that persists over reloads +//| and power cycles. Each assignment causes an erase and write cycle so its recommended to assign +//| all values to change at once. //| -//| Usage:: +//| Usage:: //| -//| import microcontroller -//| microcontroller.nvm[0:3] = b"\xcc\x10\x00" +//| import microcontroller +//| microcontroller.nvm[0:3] = b\"\xcc\x10\x00\"""" //| -//| .. class:: ByteArray() -//| -//| Not currently dynamically supported. Access the sole instance through `microcontroller.nvm`. +//| def __init__(self, ): +//| """Not currently dynamically supported. Access the sole instance through `microcontroller.nvm`.""" +//| ... //| -//| .. method:: __len__() -//| -//| Return the length. This is used by (`len`) +//| def __len__(self, ) -> Any: +//| """Return the length. This is used by (`len`)""" +//| ... //| STATIC mp_obj_t nvm_bytearray_unary_op(mp_unary_op_t op, mp_obj_t self_in) { nvm_bytearray_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/nvm/__init__.c b/shared-bindings/nvm/__init__.c index 811855c09..3bd9a309b 100644 --- a/shared-bindings/nvm/__init__.c +++ b/shared-bindings/nvm/__init__.c @@ -31,7 +31,7 @@ #include "shared-bindings/nvm/__init__.h" #include "shared-bindings/nvm/ByteArray.h" -//| :mod:`nvm` --- Non-volatile memory +//| """:mod:`nvm` --- Non-volatile memory //| =========================================================== //| //| .. module:: nvm @@ -47,7 +47,8 @@ //| .. toctree:: //| :maxdepth: 3 //| -//| ByteArray +//| ByteArray""" +//| STATIC const mp_rom_map_elem_t nvm_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_nvm) }, { MP_ROM_QSTR(MP_QSTR_ByteArray), MP_ROM_PTR(&nvm_bytearray_type) }, -- cgit v1.2.3 From 09530e5dc34d6fbcbf5fa85a1f7df9d47d8c8329 Mon Sep 17 00:00:00 2001 From: dherrada Date: Fri, 8 May 2020 16:03:39 -0400 Subject: Did os, _pixelbuf, _pew --- shared-bindings/_pew/PewPew.c | 40 ++++++------ shared-bindings/_pew/__init__.c | 4 +- shared-bindings/_pixelbuf/PixelBuf.c | 94 +++++++++++++-------------- shared-bindings/_pixelbuf/__init__.c | 14 ++-- shared-bindings/os/__init__.c | 120 +++++++++++++++++------------------ 5 files changed, 134 insertions(+), 138 deletions(-) diff --git a/shared-bindings/_pew/PewPew.c b/shared-bindings/_pew/PewPew.c index 3ff208761..37188d2b7 100644 --- a/shared-bindings/_pew/PewPew.c +++ b/shared-bindings/_pew/PewPew.c @@ -34,33 +34,33 @@ #include "shared-module/_pew/PewPew.h" #include "supervisor/shared/translate.h" - -//| .. currentmodule:: _pew +//| class PewPew: +//| """.. currentmodule:: _pew //| -//| :class:`PewPew` -- LED matrix and button driver -//| =============================================== +//| :class:`PewPew` -- LED matrix and button driver +//| =============================================== //| -//| This is an internal module to be used by the ``pew.py`` library from -//| https://github.com/pewpew-game/pew-pewpew-standalone-10.x to handle the -//| LED matrix display and buttons on the ``pewpew10`` board. +//| This is an internal module to be used by the ``pew.py`` library from +//| https://github.com/pewpew-game/pew-pewpew-standalone-10.x to handle the +//| LED matrix display and buttons on the ``pewpew10`` board. //| -//| Usage:: +//| Usage:: //| -//| This singleton class is instantiated by the ``pew`` library, and -//| used internally by it. All user-visible interactions are done through -//| that library. +//| This singleton class is instantiated by the ``pew`` library, and +//| used internally by it. All user-visible interactions are done through +//| that library.""" //| -//| .. class:: PewPew(buffer, rows, cols, buttons) -//| -//| Initializes matrix scanning routines. +//| def __init__(self, buffer: Any, rows: Any, cols: Any, buttons: Any): +//| """Initializes matrix scanning routines. //| -//| The ``buffer`` is a 64 byte long ``bytearray`` that stores what should -//| be displayed on the matrix. ``rows`` and ``cols`` are both lists of -//| eight ``DigitalInputOutput`` objects that are connected to the matrix -//| rows and columns. ``buttons`` is a ``DigitalInputOutput`` object that -//| is connected to the common side of all buttons (the other sides of the -//| buttons are connected to rows of the matrix). +//| The ``buffer`` is a 64 byte long ``bytearray`` that stores what should +//| be displayed on the matrix. ``rows`` and ``cols`` are both lists of +//| eight ``DigitalInputOutput`` objects that are connected to the matrix +//| rows and columns. ``buttons`` is a ``DigitalInputOutput`` object that +//| is connected to the common side of all buttons (the other sides of the +//| buttons are connected to rows of the matrix).""" +//| ... //| STATIC mp_obj_t pewpew_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { diff --git a/shared-bindings/_pew/__init__.c b/shared-bindings/_pew/__init__.c index 6c5520ac5..b6aab6726 100644 --- a/shared-bindings/_pew/__init__.c +++ b/shared-bindings/_pew/__init__.c @@ -41,7 +41,7 @@ STATIC mp_obj_t get_pressed(void) { STATIC MP_DEFINE_CONST_FUN_OBJ_0(get_pressed_obj, get_pressed); -//| :mod:`_pew` --- LED matrix driver +//| """:mod:`_pew` --- LED matrix driver //| ================================== //| //| .. module:: _pew @@ -51,7 +51,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_0(get_pressed_obj, get_pressed); //| .. toctree:: //| :maxdepth: 3 //| -//| PewPew +//| PewPew""" //| STATIC const mp_rom_map_elem_t pew_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR__pew) }, diff --git a/shared-bindings/_pixelbuf/PixelBuf.c b/shared-bindings/_pixelbuf/PixelBuf.c index 61b4c9ae0..1c0888802 100644 --- a/shared-bindings/_pixelbuf/PixelBuf.c +++ b/shared-bindings/_pixelbuf/PixelBuf.c @@ -44,31 +44,32 @@ extern const int32_t colorwheel(float pos); static void parse_byteorder(mp_obj_t byteorder_obj, pixelbuf_byteorder_details_t* parsed); -//| .. currentmodule:: pixelbuf +//| class PixelBuf: +//| """.. currentmodule:: pixelbuf //| -//| :class:`PixelBuf` -- A fast RGB[W] pixel buffer for LED and similar devices -//| =========================================================================== +//| :class:`PixelBuf` -- A fast RGB[W] pixel buffer for LED and similar devices +//| =========================================================================== //| -//| :class:`~_pixelbuf.PixelBuf` implements an RGB[W] bytearray abstraction. +//| :class:`~_pixelbuf.PixelBuf` implements an RGB[W] bytearray abstraction.""" //| -//| .. class:: PixelBuf(size, *, byteorder="BGR", brightness=0, auto_write=False, header=b"", trailer=b"") +//| def __init__(self, size: int, *, byteorder: str = "BGR", brightness: float = 0, auto_write: bool = False, header: bytes = b"", trailer: bytes = b""): +//| """Create a PixelBuf object of the specified size, byteorder, and bits per pixel. //| -//| Create a PixelBuf object of the specified size, byteorder, and bits per pixel. +//| When brightness is less than 1.0, a second buffer will be used to store the color values +//| before they are adjusted for brightness. //| -//| When brightness is less than 1.0, a second buffer will be used to store the color values -//| before they are adjusted for brightness. +//| When ``P`` (pwm duration) is present as the 4th character of the byteorder +//| string, the 4th value in the tuple/list for a pixel is the individual pixel +//| brightness (0.0-1.0) and will enable a Dotstar compatible 1st byte in the +//| output buffer (``buf``). //| -//| When ``P`` (pwm duration) is present as the 4th character of the byteorder -//| string, the 4th value in the tuple/list for a pixel is the individual pixel -//| brightness (0.0-1.0) and will enable a Dotstar compatible 1st byte in the -//| output buffer (``buf``). -//| -//| :param ~int size: Number of pixelsx -//| :param ~str byteorder: Byte order string (such as "BGR" or "PBGR") -//| :param ~float brightness: Brightness (0 to 1.0, default 1.0) -//| :param ~bool auto_write: Whether to automatically write pixels (Default False) -//| :param bytes header: Sequence of bytes to always send before pixel values. -//| :param bytes trailer: Sequence of bytes to always send after pixel values. +//| :param ~int size: Number of pixelsx +//| :param ~str byteorder: Byte order string (such as "BGR" or "PBGR") +//| :param ~float brightness: Brightness (0 to 1.0, default 1.0) +//| :param ~bool auto_write: Whether to automatically write pixels (Default False) +//| :param bytes header: Sequence of bytes to always send before pixel values. +//| :param bytes trailer: Sequence of bytes to always send after pixel values.""" +//| ... //| STATIC mp_obj_t pixelbuf_pixelbuf_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 1, MP_OBJ_FUN_ARGS_MAX, true); @@ -156,9 +157,8 @@ static void parse_byteorder(mp_obj_t byteorder_obj, pixelbuf_byteorder_details_t } } -//| .. attribute:: bpp -//| -//| The number of bytes per pixel in the buffer (read-only) +//| bpp: Any = ... +//| """The number of bytes per pixel in the buffer (read-only)""" //| STATIC mp_obj_t pixelbuf_pixelbuf_obj_get_bpp(mp_obj_t self_in) { return MP_OBJ_NEW_SMALL_INT(common_hal__pixelbuf_pixelbuf_get_bpp(self_in)); @@ -173,12 +173,11 @@ const mp_obj_property_t pixelbuf_pixelbuf_bpp_obj = { }; -//| .. attribute:: brightness -//| -//| Float value between 0 and 1. Output brightness. +//| brightness: Any = ... +//| """Float value between 0 and 1. Output brightness. //| //| When brightness is less than 1.0, a second buffer will be used to store the color values -//| before they are adjusted for brightness. +//| before they are adjusted for brightness.""" //| STATIC mp_obj_t pixelbuf_pixelbuf_obj_get_brightness(mp_obj_t self_in) { return mp_obj_new_float(common_hal__pixelbuf_pixelbuf_get_brightness(self_in)); @@ -205,9 +204,8 @@ const mp_obj_property_t pixelbuf_pixelbuf_brightness_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: auto_write -//| -//| Whether to automatically write the pixels after each update. +//| auto_write: Any = ... +//| """Whether to automatically write the pixels after each update.""" //| STATIC mp_obj_t pixelbuf_pixelbuf_obj_get_auto_write(mp_obj_t self_in) { return mp_obj_new_bool(common_hal__pixelbuf_pixelbuf_get_auto_write(self_in)); @@ -228,9 +226,8 @@ const mp_obj_property_t pixelbuf_pixelbuf_auto_write_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: byteorder -//| -//| byteorder string for the buffer (read-only) +//| byteorder: Any = ... +//| """byteorder string for the buffer (read-only)""" //| STATIC mp_obj_t pixelbuf_pixelbuf_obj_get_byteorder(mp_obj_t self_in) { return common_hal__pixelbuf_pixelbuf_get_byteorder_string(self_in); @@ -253,10 +250,10 @@ STATIC mp_obj_t pixelbuf_pixelbuf_unary_op(mp_unary_op_t op, mp_obj_t self_in) { } } -//| .. method:: show() -//| -//| Transmits the color data to the pixels so that they are shown. This is done automatically -//| when `auto_write` is True. +//| def show(self, ) -> Any: +//| """Transmits the color data to the pixels so that they are shown. This is done automatically +//| when `auto_write` is True.""" +//| ... //| STATIC mp_obj_t pixelbuf_pixelbuf_show(mp_obj_t self_in) { @@ -265,9 +262,9 @@ STATIC mp_obj_t pixelbuf_pixelbuf_show(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(pixelbuf_pixelbuf_show_obj, pixelbuf_pixelbuf_show); -//| .. function:: fill(color) -//| -//| Fills the given pixelbuf with the given color. +//| def fill(color: Any) -> Any: +//| """Fills the given pixelbuf with the given color.""" +//| ... //| STATIC mp_obj_t pixelbuf_pixelbuf_fill(mp_obj_t self_in, mp_obj_t value) { @@ -277,17 +274,16 @@ STATIC mp_obj_t pixelbuf_pixelbuf_fill(mp_obj_t self_in, mp_obj_t value) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(pixelbuf_pixelbuf_fill_obj, pixelbuf_pixelbuf_fill); - -//| .. method:: __getitem__(index) -//| -//| Returns the pixel value at the given index as a tuple of (Red, Green, Blue[, White]) values -//| between 0 and 255. -//| -//| .. method:: __setitem__(index, value) +//| def __getitem__(self, index: Any) -> Any: +//| """Returns the pixel value at the given index as a tuple of (Red, Green, Blue[, White]) values +//| between 0 and 255.""" +//| ... //| -//| Sets the pixel value at the given index. Value can either be a tuple of (Red, Green, Blue -//| [, White]) values between 0 and 255 or an integer where the red, green and blue values are -//| packed into the lower three bytes (0xRRGGBB). +//| def __setitem__(self, index: Any, value: Any) -> Any: +//| """Sets the pixel value at the given index. Value can either be a tuple of (Red, Green, Blue +//| [, White]) values between 0 and 255 or an integer where the red, green and blue values are +//| packed into the lower three bytes (0xRRGGBB).""" +//| ... //| STATIC mp_obj_t pixelbuf_pixelbuf_subscr(mp_obj_t self_in, mp_obj_t index_in, mp_obj_t value) { if (value == MP_OBJ_NULL) { diff --git a/shared-bindings/_pixelbuf/__init__.c b/shared-bindings/_pixelbuf/__init__.c index 424ed23e4..3c04d436a 100644 --- a/shared-bindings/_pixelbuf/__init__.c +++ b/shared-bindings/_pixelbuf/__init__.c @@ -33,7 +33,7 @@ #include "shared-bindings/_pixelbuf/PixelBuf.h" -//| :mod:`_pixelbuf` --- Fast RGB(W) pixel buffer and helpers +//| """:mod:`_pixelbuf` --- Fast RGB(W) pixel buffer and helpers //| =========================================================== //| .. module:: _pixelbuf @@ -50,13 +50,13 @@ //| .. toctree:: //| :maxdepth: 3 //| -//| PixelBuf - - -//| .. function:: wheel(n) +//| PixelBuf""" //| -//| C implementation of the common wheel() function found in many examples. -//| Returns the colorwheel RGB value as an integer value for n (usable in :py:class:`PixelBuf`, neopixel, and dotstar). + +//| def wheel(n: Any) -> Any: +//| """C implementation of the common wheel() function found in many examples. +//| Returns the colorwheel RGB value as an integer value for n (usable in :py:class:`PixelBuf`, neopixel, and dotstar).""" +//| ... //| STATIC mp_obj_t pixelbuf_wheel(mp_obj_t n) { diff --git a/shared-bindings/os/__init__.c b/shared-bindings/os/__init__.c index f3b745aef..2a6b13c9b 100644 --- a/shared-bindings/os/__init__.c +++ b/shared-bindings/os/__init__.c @@ -37,7 +37,7 @@ #include "py/runtime.h" #include "shared-bindings/os/__init__.h" -//| :mod:`os` --- functions that an OS normally provides +//| """:mod:`os` --- functions that an OS normally provides //| ======================================================== //| //| .. module:: os @@ -46,22 +46,22 @@ //| //| The `os` module is a strict subset of the CPython `cpython:os` module. So, //| code written in CircuitPython will work in CPython but not necessarily the -//| other way around. +//| other way around.""" //| -//| .. function:: uname() -//| -//| Returns a named tuple of operating specific and CircuitPython port -//| specific information. +//| def uname() -> Any: +//| """Returns a named tuple of operating specific and CircuitPython port +//| specific information.""" +//| ... //| STATIC mp_obj_t os_uname(void) { return common_hal_os_uname(); } STATIC MP_DEFINE_CONST_FUN_OBJ_0(os_uname_obj, os_uname); -//| .. function:: chdir(path) -//| -//| Change current directory. +//| def chdir(path: Any) -> Any: +//| """Change current directory.""" +//| ... //| mp_obj_t os_chdir(mp_obj_t path_in) { const char *path = mp_obj_str_get_str(path_in); @@ -70,18 +70,18 @@ mp_obj_t os_chdir(mp_obj_t path_in) { } MP_DEFINE_CONST_FUN_OBJ_1(os_chdir_obj, os_chdir); -//| .. function:: getcwd() -//| -//| Get the current directory. +//| def getcwd() -> Any: +//| """Get the current directory.""" +//| ... //| mp_obj_t os_getcwd(void) { return common_hal_os_getcwd(); } MP_DEFINE_CONST_FUN_OBJ_0(os_getcwd_obj, os_getcwd); -//| .. function:: listdir([dir]) -//| -//| With no argument, list the current directory. Otherwise list the given directory. +//| def listdir(dir: Any) -> Any: +//| """With no argument, list the current directory. Otherwise list the given directory.""" +//| ... //| mp_obj_t os_listdir(size_t n_args, const mp_obj_t *args) { const char* path; @@ -94,9 +94,9 @@ mp_obj_t os_listdir(size_t n_args, const mp_obj_t *args) { } MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(os_listdir_obj, 0, 1, os_listdir); -//| .. function:: mkdir(path) -//| -//| Create a new directory. +//| def mkdir(path: Any) -> Any: +//| """Create a new directory.""" +//| ... //| mp_obj_t os_mkdir(mp_obj_t path_in) { const char *path = mp_obj_str_get_str(path_in); @@ -105,9 +105,9 @@ mp_obj_t os_mkdir(mp_obj_t path_in) { } MP_DEFINE_CONST_FUN_OBJ_1(os_mkdir_obj, os_mkdir); -//| .. function:: remove(path) -//| -//| Remove a file. +//| def remove(path: Any) -> Any: +//| """Remove a file.""" +//| ... //| mp_obj_t os_remove(mp_obj_t path_in) { const char *path = mp_obj_str_get_str(path_in); @@ -116,9 +116,9 @@ mp_obj_t os_remove(mp_obj_t path_in) { } MP_DEFINE_CONST_FUN_OBJ_1(os_remove_obj, os_remove); -//| .. function:: rmdir(path) -//| -//| Remove a directory. +//| def rmdir(path: Any) -> Any: +//| """Remove a directory.""" +//| ... //| mp_obj_t os_rename(mp_obj_t old_path_in, mp_obj_t new_path_in) { const char *old_path = mp_obj_str_get_str(old_path_in); @@ -128,9 +128,9 @@ mp_obj_t os_rename(mp_obj_t old_path_in, mp_obj_t new_path_in) { } MP_DEFINE_CONST_FUN_OBJ_2(os_rename_obj, os_rename); -//| .. function:: rename(old_path, new_path) -//| -//| Rename a file. +//| def rename(old_path: Any, new_path: Any) -> Any: +//| """Rename a file.""" +//| ... //| mp_obj_t os_rmdir(mp_obj_t path_in) { const char *path = mp_obj_str_get_str(path_in); @@ -139,14 +139,14 @@ mp_obj_t os_rmdir(mp_obj_t path_in) { } MP_DEFINE_CONST_FUN_OBJ_1(os_rmdir_obj, os_rmdir); -//| .. function:: stat(path) -//| -//| Get the status of a file or directory. +//| def stat(path: Any) -> Any: +//| """Get the status of a file or directory. //| -//| .. note:: On builds without long integers, the number of seconds -//| for contemporary dates will not fit in a small integer. -//| So the time fields return 946684800, -//| which is the number of seconds corresponding to 1999-12-31. +//| .. note:: On builds without long integers, the number of seconds +//| for contemporary dates will not fit in a small integer. +//| So the time fields return 946684800, +//| which is the number of seconds corresponding to 1999-12-31.""" +//| ... //| mp_obj_t os_stat(mp_obj_t path_in) { const char *path = mp_obj_str_get_str(path_in); @@ -154,26 +154,26 @@ mp_obj_t os_stat(mp_obj_t path_in) { } MP_DEFINE_CONST_FUN_OBJ_1(os_stat_obj, os_stat); -//| .. function:: statvfs(path) +//| def statvfs(path: Any) -> Any: +//| """Get the status of a fileystem. //| -//| Get the status of a fileystem. +//| Returns a tuple with the filesystem information in the following order: //| -//| Returns a tuple with the filesystem information in the following order: +//| * ``f_bsize`` -- file system block size +//| * ``f_frsize`` -- fragment size +//| * ``f_blocks`` -- size of fs in f_frsize units +//| * ``f_bfree`` -- number of free blocks +//| * ``f_bavail`` -- number of free blocks for unpriviliged users +//| * ``f_files`` -- number of inodes +//| * ``f_ffree`` -- number of free inodes +//| * ``f_favail`` -- number of free inodes for unpriviliged users +//| * ``f_flag`` -- mount flags +//| * ``f_namemax`` -- maximum filename length //| -//| * ``f_bsize`` -- file system block size -//| * ``f_frsize`` -- fragment size -//| * ``f_blocks`` -- size of fs in f_frsize units -//| * ``f_bfree`` -- number of free blocks -//| * ``f_bavail`` -- number of free blocks for unpriviliged users -//| * ``f_files`` -- number of inodes -//| * ``f_ffree`` -- number of free inodes -//| * ``f_favail`` -- number of free inodes for unpriviliged users -//| * ``f_flag`` -- mount flags -//| * ``f_namemax`` -- maximum filename length -//| -//| Parameters related to inodes: ``f_files``, ``f_ffree``, ``f_avail`` -//| and the ``f_flags`` parameter may return ``0`` as they can be unavailable -//| in a port-specific implementation. +//| Parameters related to inodes: ``f_files``, ``f_ffree``, ``f_avail`` +//| and the ``f_flags`` parameter may return ``0`` as they can be unavailable +//| in a port-specific implementation.""" +//| ... //| mp_obj_t os_statvfs(mp_obj_t path_in) { const char *path = mp_obj_str_get_str(path_in); @@ -181,9 +181,9 @@ mp_obj_t os_statvfs(mp_obj_t path_in) { } MP_DEFINE_CONST_FUN_OBJ_1(os_statvfs_obj, os_statvfs); -//| .. function:: sync() -//| -//| Sync all filesystems. +//| def sync() -> Any: +//| """Sync all filesystems.""" +//| ... //| STATIC mp_obj_t os_sync(void) { for (mp_vfs_mount_t *vfs = MP_STATE_VM(vfs_mount_table); vfs != NULL; vfs = vfs->next) { @@ -194,10 +194,10 @@ STATIC mp_obj_t os_sync(void) { } MP_DEFINE_CONST_FUN_OBJ_0(os_sync_obj, os_sync); -//| .. function:: urandom(size) -//| -//| Returns a string of *size* random bytes based on a hardware True Random -//| Number Generator. When not available, it will raise a NotImplementedError. +//| def urandom(size: Any) -> Any: +//| """Returns a string of *size* random bytes based on a hardware True Random +//| Number Generator. When not available, it will raise a NotImplementedError.""" +//| ... //| STATIC mp_obj_t os_urandom(mp_obj_t size_in) { mp_int_t size = mp_obj_get_int(size_in); @@ -229,9 +229,9 @@ STATIC const mp_rom_map_elem_t os_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR_urandom), MP_ROM_PTR(&os_urandom_obj) }, -//| .. data:: sep +//| """.. data:: sep //| -//| Separator used to delineate path components such as folder and file names. +//| Separator used to delineate path components such as folder and file names.""" //| { MP_ROM_QSTR(MP_QSTR_sep), MP_ROM_QSTR(MP_QSTR__slash_) }, }; -- cgit v1.2.3 From 838b6c56858fa3888c558e5640031b8764c313d7 Mon Sep 17 00:00:00 2001 From: dherrada Date: Mon, 11 May 2020 10:48:11 -0400 Subject: Did ps2io, pulseio, random --- shared-bindings/ps2io/Ps2.c | 135 ++++++++++++++++--------------- shared-bindings/ps2io/__init__.c | 4 +- shared-bindings/pulseio/PWMOut.c | 114 +++++++++++++------------- shared-bindings/pulseio/PulseIn.c | 161 ++++++++++++++++++------------------- shared-bindings/pulseio/PulseOut.c | 83 +++++++++---------- shared-bindings/pulseio/__init__.c | 4 +- shared-bindings/random/__init__.c | 55 +++++++------ 7 files changed, 278 insertions(+), 278 deletions(-) diff --git a/shared-bindings/ps2io/Ps2.c b/shared-bindings/ps2io/Ps2.c index 89ed0a76c..d327d4180 100644 --- a/shared-bindings/ps2io/Ps2.c +++ b/shared-bindings/ps2io/Ps2.c @@ -36,38 +36,39 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: ps2io +//| class Ps2: +//| """.. currentmodule:: ps2io //| -//| :class:`Ps2` -- Communicate with a PS/2 keyboard or mouse -//| ========================================================= +//| :class:`Ps2` -- Communicate with a PS/2 keyboard or mouse +//| ========================================================= //| -//| Ps2 implements the PS/2 keyboard/mouse serial protocol, used in -//| legacy devices. It is similar to UART but there are only two -//| lines (Data and Clock). PS/2 devices are 5V, so bidirectional -//| level converters must be used to connect the I/O lines to pins -//| of 3.3V boards. +//| Ps2 implements the PS/2 keyboard/mouse serial protocol, used in +//| legacy devices. It is similar to UART but there are only two +//| lines (Data and Clock). PS/2 devices are 5V, so bidirectional +//| level converters must be used to connect the I/O lines to pins +//| of 3.3V boards.""" //| -//| .. class:: Ps2(data_pin, clock_pin) +//| def __init__(self, data_pin: microcontroller.Pin, clock_pin: microcontroller.Pin): +//| """Create a Ps2 object associated with the given pins. //| -//| Create a Ps2 object associated with the given pins. +//| :param ~microcontroller.Pin data_pin: Pin tied to data wire. +//| :param ~microcontroller.Pin clock_pin: Pin tied to clock wire. +//| This pin must support interrupts. //| -//| :param ~microcontroller.Pin data_pin: Pin tied to data wire. -//| :param ~microcontroller.Pin clock_pin: Pin tied to clock wire. -//| This pin must support interrupts. +//| Read one byte from PS/2 keyboard and turn on Scroll Lock LED:: //| -//| Read one byte from PS/2 keyboard and turn on Scroll Lock LED:: +//| import ps2io +//| import board //| -//| import ps2io -//| import board +//| kbd = ps2io.Ps2(board.D10, board.D11) //| -//| kbd = ps2io.Ps2(board.D10, board.D11) +//| while len(kbd) == 0: +//| pass //| -//| while len(kbd) == 0: -//| pass -//| -//| print(kbd.popleft()) -//| print(kbd.sendcmd(0xed)) -//| print(kbd.sendcmd(0x01)) +//| print(kbd.popleft()) +//| print(kbd.sendcmd(0xed)) +//| print(kbd.sendcmd(0x01))""" +//| ... //| STATIC mp_obj_t ps2io_ps2_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_datapin, ARG_clkpin }; @@ -89,9 +90,9 @@ STATIC mp_obj_t ps2io_ps2_make_new(const mp_obj_type_t *type, size_t n_args, con return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the Ps2 and releases any hardware resources for reuse. +//| def deinit(self, ) -> Any: +//| """Deinitialises the Ps2 and releases any hardware resources for reuse.""" +//| ... //| STATIC mp_obj_t ps2io_ps2_deinit(mp_obj_t self_in) { ps2io_ps2_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -106,16 +107,16 @@ STATIC void check_for_deinit(ps2io_ps2_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t ps2io_ps2_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -124,10 +125,10 @@ STATIC mp_obj_t ps2io_ps2_obj___exit__(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(ps2io_ps2___exit___obj, 4, 4, ps2io_ps2_obj___exit__); -//| .. method:: popleft() -//| -//| Removes and returns the oldest received byte. When buffer -//| is empty, raises an IndexError exception. +//| def popleft(self, ) -> Any: +//| """Removes and returns the oldest received byte. When buffer +//| is empty, raises an IndexError exception.""" +//| ... //| STATIC mp_obj_t ps2io_ps2_obj_popleft(mp_obj_t self_in) { ps2io_ps2_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -141,18 +142,18 @@ STATIC mp_obj_t ps2io_ps2_obj_popleft(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(ps2io_ps2_popleft_obj, ps2io_ps2_obj_popleft); -//| .. method:: sendcmd(byte) -//| -//| Sends a command byte to PS/2. Returns the response byte, typically -//| the general ack value (0xFA). Some commands return additional data -//| which is available through :py:func:`popleft()`. +//| def sendcmd(self, byte: int) -> Any: +//| """Sends a command byte to PS/2. Returns the response byte, typically +//| the general ack value (0xFA). Some commands return additional data +//| which is available through :py:func:`popleft()`. //| -//| Raises a RuntimeError in case of failure. The root cause can be found -//| by calling :py:func:`clear_errors()`. It is advisable to call -//| :py:func:`clear_errors()` before :py:func:`sendcmd()` to flush any -//| previous errors. +//| Raises a RuntimeError in case of failure. The root cause can be found +//| by calling :py:func:`clear_errors()`. It is advisable to call +//| :py:func:`clear_errors()` before :py:func:`sendcmd()` to flush any +//| previous errors. //| -//| :param int byte: byte value of the command +//| :param int byte: byte value of the command""" +//| ... //| STATIC mp_obj_t ps2io_ps2_obj_sendcmd(mp_obj_t self_in, mp_obj_t ob) { ps2io_ps2_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -166,35 +167,35 @@ STATIC mp_obj_t ps2io_ps2_obj_sendcmd(mp_obj_t self_in, mp_obj_t ob) { } MP_DEFINE_CONST_FUN_OBJ_2(ps2io_ps2_sendcmd_obj, ps2io_ps2_obj_sendcmd); -//| .. method:: clear_errors() +//| def clear_errors(self, ) -> Any: +//| """Returns and clears a bitmap with latest recorded communication errors. //| -//| Returns and clears a bitmap with latest recorded communication errors. +//| Reception errors (arise asynchronously, as data is received): //| -//| Reception errors (arise asynchronously, as data is received): +//| 0x01: start bit not 0 //| -//| 0x01: start bit not 0 +//| 0x02: timeout //| -//| 0x02: timeout +//| 0x04: parity bit error //| -//| 0x04: parity bit error +//| 0x08: stop bit not 1 //| -//| 0x08: stop bit not 1 +//| 0x10: buffer overflow, newest data discarded //| -//| 0x10: buffer overflow, newest data discarded +//| Transmission errors (can only arise in the course of sendcmd()): //| -//| Transmission errors (can only arise in the course of sendcmd()): +//| 0x100: clock pin didn't go to LO in time //| -//| 0x100: clock pin didn't go to LO in time +//| 0x200: clock pin didn't go to HI in time //| -//| 0x200: clock pin didn't go to HI in time +//| 0x400: data pin didn't ACK //| -//| 0x400: data pin didn't ACK +//| 0x800: clock pin didn't ACK //| -//| 0x800: clock pin didn't ACK +//| 0x1000: device didn't respond to RTS //| -//| 0x1000: device didn't respond to RTS -//| -//| 0x2000: device didn't send a response byte in time +//| 0x2000: device didn't send a response byte in time""" +//| ... //| STATIC mp_obj_t ps2io_ps2_obj_clear_errors(mp_obj_t self_in) { ps2io_ps2_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -204,10 +205,10 @@ STATIC mp_obj_t ps2io_ps2_obj_clear_errors(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(ps2io_ps2_clear_errors_obj, ps2io_ps2_obj_clear_errors); -//| .. method:: __len__() -//| -//| Returns the number of received bytes in buffer, available -//| to :py:func:`popleft()`. +//| def __len__(self, ) -> Any: +//| """Returns the number of received bytes in buffer, available +//| to :py:func:`popleft()`.""" +//| ... //| STATIC mp_obj_t ps2_unary_op(mp_unary_op_t op, mp_obj_t self_in) { ps2io_ps2_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/ps2io/__init__.c b/shared-bindings/ps2io/__init__.c index ec7c43e51..081127bac 100644 --- a/shared-bindings/ps2io/__init__.c +++ b/shared-bindings/ps2io/__init__.c @@ -33,7 +33,7 @@ #include "shared-bindings/microcontroller/Pin.h" #include "shared-bindings/ps2io/Ps2.h" -//| :mod:`ps2io` --- Support for PS/2 protocol +//| """:mod:`ps2io` --- Support for PS/2 protocol //| ===================================================== //| //| .. module:: ps2io @@ -57,7 +57,7 @@ //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either //| call :py:meth:`!deinit` or use a context manager. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| :ref:`lifetime-and-contextmanagers` for more info.""" //| STATIC const mp_rom_map_elem_t ps2io_module_globals_table[] = { diff --git a/shared-bindings/pulseio/PWMOut.c b/shared-bindings/pulseio/PWMOut.c index 2491a5c3f..3a25d6938 100644 --- a/shared-bindings/pulseio/PWMOut.c +++ b/shared-bindings/pulseio/PWMOut.c @@ -35,55 +35,56 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: pulseio +//| class PWMOut: +//| """.. currentmodule:: pulseio //| -//| :class:`PWMOut` -- Output a Pulse Width Modulated signal -//| ======================================================== +//| :class:`PWMOut` -- Output a Pulse Width Modulated signal +//| ======================================================== //| -//| PWMOut can be used to output a PWM signal on a given pin. +//| PWMOut can be used to output a PWM signal on a given pin.""" //| -//| .. class:: PWMOut(pin, *, duty_cycle=0, frequency=500, variable_frequency=False) +//| def __init__(self, pin: microcontroller.Pin, *, duty_cycle: int = 0, frequency: int = 500, variable_frequency: bool = False): +//| """Create a PWM object associated with the given pin. This allows you to +//| write PWM signals out on the given pin. Frequency is fixed after init +//| unless ``variable_frequency`` is True. //| -//| Create a PWM object associated with the given pin. This allows you to -//| write PWM signals out on the given pin. Frequency is fixed after init -//| unless ``variable_frequency`` is True. +//| .. note:: When ``variable_frequency`` is True, further PWM outputs may be +//| limited because it may take more internal resources to be flexible. So, +//| when outputting both fixed and flexible frequency signals construct the +//| fixed outputs first. //| -//| .. note:: When ``variable_frequency`` is True, further PWM outputs may be -//| limited because it may take more internal resources to be flexible. So, -//| when outputting both fixed and flexible frequency signals construct the -//| fixed outputs first. +//| :param ~microcontroller.Pin pin: The pin to output to +//| :param int duty_cycle: The fraction of each pulse which is high. 16-bit +//| :param int frequency: The target frequency in Hertz (32-bit) +//| :param bool variable_frequency: True if the frequency will change over time //| -//| :param ~microcontroller.Pin pin: The pin to output to -//| :param int duty_cycle: The fraction of each pulse which is high. 16-bit -//| :param int frequency: The target frequency in Hertz (32-bit) -//| :param bool variable_frequency: True if the frequency will change over time +//| Simple LED fade:: //| -//| Simple LED fade:: +//| import pulseio +//| import board //| -//| import pulseio -//| import board +//| pwm = pulseio.PWMOut(board.D13) # output on D13 +//| pwm.duty_cycle = 2 ** 15 # Cycles the pin with 50% duty cycle (half of 2 ** 16) at the default 500hz //| -//| pwm = pulseio.PWMOut(board.D13) # output on D13 -//| pwm.duty_cycle = 2 ** 15 # Cycles the pin with 50% duty cycle (half of 2 ** 16) at the default 500hz +//| PWM at specific frequency (servos and motors):: //| -//| PWM at specific frequency (servos and motors):: +//| import pulseio +//| import board //| -//| import pulseio -//| import board +//| pwm = pulseio.PWMOut(board.D13, frequency=50) +//| pwm.duty_cycle = 2 ** 15 # Cycles the pin with 50% duty cycle (half of 2 ** 16) at 50hz //| -//| pwm = pulseio.PWMOut(board.D13, frequency=50) -//| pwm.duty_cycle = 2 ** 15 # Cycles the pin with 50% duty cycle (half of 2 ** 16) at 50hz +//| Variable frequency (usually tones):: //| -//| Variable frequency (usually tones):: +//| import pulseio +//| import board +//| import time //| -//| import pulseio -//| import board -//| import time -//| -//| pwm = pulseio.PWMOut(board.D13, duty_cycle=2 ** 15, frequency=440, variable_frequency=True) -//| time.sleep(0.2) -//| pwm.frequency = 880 -//| time.sleep(0.1) +//| pwm = pulseio.PWMOut(board.D13, duty_cycle=2 ** 15, frequency=440, variable_frequency=True) +//| time.sleep(0.2) +//| pwm.frequency = 880 +//| time.sleep(0.1)""" +//| ... //| STATIC mp_obj_t pulseio_pwmout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { enum { ARG_pin, ARG_duty_cycle, ARG_frequency, ARG_variable_frequency }; @@ -119,9 +120,9 @@ STATIC mp_obj_t pulseio_pwmout_make_new(const mp_obj_type_t *type, size_t n_args return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the PWMOut and releases any hardware resources for reuse. +//| def deinit(self, ) -> Any: +//| """Deinitialises the PWMOut and releases any hardware resources for reuse.""" +//| ... //| STATIC mp_obj_t pulseio_pwmout_deinit(mp_obj_t self_in) { pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -136,16 +137,16 @@ STATIC void check_for_deinit(pulseio_pwmout_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t pulseio_pwmout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -154,16 +155,16 @@ STATIC mp_obj_t pulseio_pwmout_obj___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pulseio_pwmout___exit___obj, 4, 4, pulseio_pwmout_obj___exit__); -//| .. attribute:: duty_cycle +//| duty_cycle: Any = ... +//| """16 bit value that dictates how much of one cycle is high (1) versus low +//| (0). 0xffff will always be high, 0 will always be low and 0x7fff will +//| be half high and then half low. //| -//| 16 bit value that dictates how much of one cycle is high (1) versus low -//| (0). 0xffff will always be high, 0 will always be low and 0x7fff will -//| be half high and then half low. +//| Depending on how PWM is implemented on a specific board, the internal +//| representation for duty cycle might have less than 16 bits of resolution. +//| Reading this property will return the value from the internal representation, +//| so it may differ from the value set.""" //| -//| Depending on how PWM is implemented on a specific board, the internal -//| representation for duty cycle might have less than 16 bits of resolution. -//| Reading this property will return the value from the internal representation, -//| so it may differ from the value set. STATIC mp_obj_t pulseio_pwmout_obj_get_duty_cycle(mp_obj_t self_in) { pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -190,16 +191,15 @@ const mp_obj_property_t pulseio_pwmout_duty_cycle_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: frequency -//| -//| 32 bit value that dictates the PWM frequency in Hertz (cycles per +//| frequency: Any = ... +//| """32 bit value that dictates the PWM frequency in Hertz (cycles per //| second). Only writeable when constructed with ``variable_frequency=True``. //| //| Depending on how PWM is implemented on a specific board, the internal value //| for the PWM's duty cycle may need to be recalculated when the frequency //| changes. In these cases, the duty cycle is automatically recalculated //| from the original duty cycle value. This should happen without any need -//| to manually re-set the duty cycle. +//| to manually re-set the duty cycle.""" //| STATIC mp_obj_t pulseio_pwmout_obj_get_frequency(mp_obj_t self_in) { pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/pulseio/PulseIn.c b/shared-bindings/pulseio/PulseIn.c index 6c01a4c17..9024f53e3 100644 --- a/shared-bindings/pulseio/PulseIn.c +++ b/shared-bindings/pulseio/PulseIn.c @@ -35,51 +35,52 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: pulseio +//| class PulseIn: +//| """.. currentmodule:: pulseio //| -//| :class:`PulseIn` -- Read a series of pulse durations -//| ======================================================== +//| :class:`PulseIn` -- Read a series of pulse durations +//| ======================================================== //| -//| PulseIn is used to measure a series of active and idle pulses. This is -//| commonly used in infrared receivers and low cost temperature sensors (DHT). -//| The pulsed signal consists of timed active and idle periods. Unlike PWM, -//| there is no set duration for active and idle pairs. +//| PulseIn is used to measure a series of active and idle pulses. This is +//| commonly used in infrared receivers and low cost temperature sensors (DHT). +//| The pulsed signal consists of timed active and idle periods. Unlike PWM, +//| there is no set duration for active and idle pairs.""" //| -//| .. class:: PulseIn(pin, maxlen=2, *, idle_state=False) +//| def __init__(self, pin: microcontroller.Pin, maxlen: int = 2, *, idle_state: bool = False): +//| """Create a PulseIn object associated with the given pin. The object acts as +//| a read-only sequence of pulse lengths with a given max length. When it is +//| active, new pulse lengths are added to the end of the list. When there is +//| no more room (len() == `maxlen`) the oldest pulse length is removed to +//| make room. //| -//| Create a PulseIn object associated with the given pin. The object acts as -//| a read-only sequence of pulse lengths with a given max length. When it is -//| active, new pulse lengths are added to the end of the list. When there is -//| no more room (len() == `maxlen`) the oldest pulse length is removed to -//| make room. +//| :param ~microcontroller.Pin pin: Pin to read pulses from. +//| :param int maxlen: Maximum number of pulse durations to store at once +//| :param bool idle_state: Idle state of the pin. At start and after `resume` +//| the first recorded pulse will the opposite state from idle. //| -//| :param ~microcontroller.Pin pin: Pin to read pulses from. -//| :param int maxlen: Maximum number of pulse durations to store at once -//| :param bool idle_state: Idle state of the pin. At start and after `resume` -//| the first recorded pulse will the opposite state from idle. +//| Read a short series of pulses:: //| -//| Read a short series of pulses:: +//| import pulseio +//| import board //| -//| import pulseio -//| import board +//| pulses = pulseio.PulseIn(board.D7) //| -//| pulses = pulseio.PulseIn(board.D7) +//| # Wait for an active pulse +//| while len(pulses) == 0: +//| pass +//| # Pause while we do something with the pulses +//| pulses.pause() //| -//| # Wait for an active pulse -//| while len(pulses) == 0: -//| pass -//| # Pause while we do something with the pulses -//| pulses.pause() +//| # Print the pulses. pulses[0] is an active pulse unless the length +//| # reached max length and idle pulses are recorded. +//| print(pulses) //| -//| # Print the pulses. pulses[0] is an active pulse unless the length -//| # reached max length and idle pulses are recorded. -//| print(pulses) +//| # Clear the rest +//| pulses.clear() //| -//| # Clear the rest -//| pulses.clear() -//| -//| # Resume with an 80 microsecond active pulse -//| pulses.resume(80) +//| # Resume with an 80 microsecond active pulse +//| pulses.resume(80)""" +//| ... //| STATIC mp_obj_t pulseio_pulsein_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_pin, ARG_maxlen, ARG_idle_state }; @@ -101,9 +102,9 @@ STATIC mp_obj_t pulseio_pulsein_make_new(const mp_obj_type_t *type, size_t n_arg return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the PulseIn and releases any hardware resources for reuse. +//| def deinit(self, ) -> Any: +//| """Deinitialises the PulseIn and releases any hardware resources for reuse.""" +//| ... //| STATIC mp_obj_t pulseio_pulsein_deinit(mp_obj_t self_in) { pulseio_pulsein_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -118,16 +119,16 @@ STATIC void check_for_deinit(pulseio_pulsein_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t pulseio_pulsein_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -136,9 +137,9 @@ STATIC mp_obj_t pulseio_pulsein_obj___exit__(size_t n_args, const mp_obj_t *args } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pulseio_pulsein___exit___obj, 4, 4, pulseio_pulsein_obj___exit__); -//| .. method:: pause() -//| -//| Pause pulse capture +//| def pause(self, ) -> Any: +//| """Pause pulse capture""" +//| ... //| STATIC mp_obj_t pulseio_pulsein_obj_pause(mp_obj_t self_in) { pulseio_pulsein_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -149,16 +150,16 @@ STATIC mp_obj_t pulseio_pulsein_obj_pause(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(pulseio_pulsein_pause_obj, pulseio_pulsein_obj_pause); -//| .. method:: resume(trigger_duration=0) -//| -//| Resumes pulse capture after an optional trigger pulse. +//| def resume(self, trigger_duration: int = 0) -> Any: +//| """Resumes pulse capture after an optional trigger pulse. //| -//| .. warning:: Using trigger pulse with a device that drives both high and -//| low signals risks a short. Make sure your device is open drain (only -//| drives low) when using a trigger pulse. You most likely added a -//| "pull-up" resistor to your circuit to do this. +//| .. warning:: Using trigger pulse with a device that drives both high and +//| low signals risks a short. Make sure your device is open drain (only +//| drives low) when using a trigger pulse. You most likely added a +//| "pull-up" resistor to your circuit to do this. //| -//| :param int trigger_duration: trigger pulse duration in microseconds +//| :param int trigger_duration: trigger pulse duration in microseconds""" +//| ... //| STATIC mp_obj_t pulseio_pulsein_obj_resume(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_trigger_duration }; @@ -176,9 +177,9 @@ STATIC mp_obj_t pulseio_pulsein_obj_resume(size_t n_args, const mp_obj_t *pos_ar } MP_DEFINE_CONST_FUN_OBJ_KW(pulseio_pulsein_resume_obj, 1, pulseio_pulsein_obj_resume); -//| .. method:: clear() -//| -//| Clears all captured pulses +//| def clear(self, ) -> Any: +//| """Clears all captured pulses""" +//| ... //| STATIC mp_obj_t pulseio_pulsein_obj_clear(mp_obj_t self_in) { pulseio_pulsein_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -189,9 +190,9 @@ STATIC mp_obj_t pulseio_pulsein_obj_clear(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(pulseio_pulsein_clear_obj, pulseio_pulsein_obj_clear); -//| .. method:: popleft() -//| -//| Removes and returns the oldest read pulse. +//| def popleft(self, ) -> Any: +//| """Removes and returns the oldest read pulse.""" +//| ... //| STATIC mp_obj_t pulseio_pulsein_obj_popleft(mp_obj_t self_in) { pulseio_pulsein_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -201,10 +202,9 @@ STATIC mp_obj_t pulseio_pulsein_obj_popleft(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(pulseio_pulsein_popleft_obj, pulseio_pulsein_obj_popleft); -//| .. attribute:: maxlen -//| -//| The maximum length of the PulseIn. When len() is equal to maxlen, -//| it is unclear which pulses are active and which are idle. +//| maxlen: Any = ... +//| """The maximum length of the PulseIn. When len() is equal to maxlen, +//| it is unclear which pulses are active and which are idle.""" //| STATIC mp_obj_t pulseio_pulsein_obj_get_maxlen(mp_obj_t self_in) { pulseio_pulsein_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -221,10 +221,9 @@ const mp_obj_property_t pulseio_pulsein_maxlen_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: paused -//| -//| True when pulse capture is paused as a result of :py:func:`pause` or an error during capture -//| such as a signal that is too fast. +//| paused: Any = ... +//| """True when pulse capture is paused as a result of :py:func:`pause` or an error during capture +//| such as a signal that is too fast.""" //| STATIC mp_obj_t pulseio_pulsein_obj_get_paused(mp_obj_t self_in) { pulseio_pulsein_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -241,14 +240,14 @@ const mp_obj_property_t pulseio_pulsein_paused_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: __len__() -//| -//| Returns the current pulse length +//| def __len__(self, ) -> Any: +//| """Returns the current pulse length //| -//| This allows you to:: +//| This allows you to:: //| -//| pulses = pulseio.PulseIn(pin) -//| print(len(pulses)) +//| pulses = pulseio.PulseIn(pin) +//| print(len(pulses))""" +//| ... //| STATIC mp_obj_t pulsein_unary_op(mp_unary_op_t op, mp_obj_t self_in) { pulseio_pulsein_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -261,14 +260,14 @@ STATIC mp_obj_t pulsein_unary_op(mp_unary_op_t op, mp_obj_t self_in) { } } -//| .. method:: __getitem__(index) -//| -//| Returns the value at the given index or values in slice. +//| def __getitem__(self, index: Any) -> Any: +//| """Returns the value at the given index or values in slice. //| -//| This allows you to:: +//| This allows you to:: //| -//| pulses = pulseio.PulseIn(pin) -//| print(pulses[0]) +//| pulses = pulseio.PulseIn(pin) +//| print(pulses[0])""" +//| ... //| STATIC mp_obj_t pulsein_subscr(mp_obj_t self_in, mp_obj_t index_obj, mp_obj_t value) { if (value == mp_const_none) { diff --git a/shared-bindings/pulseio/PulseOut.c b/shared-bindings/pulseio/PulseOut.c index 172459e5d..9c650731b 100644 --- a/shared-bindings/pulseio/PulseOut.c +++ b/shared-bindings/pulseio/PulseOut.c @@ -36,37 +36,38 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: pulseio +//| class PulseOut: +//| """.. currentmodule:: pulseio //| -//| :class:`PulseOut` -- Output a pulse train -//| ======================================================== +//| :class:`PulseOut` -- Output a pulse train +//| ======================================================== //| -//| PulseOut is used to pulse PWM "carrier" output on and off. This is commonly -//| used in infrared remotes. The pulsed signal consists of timed on and off -//| periods. Unlike PWM, there is no set duration for on and off pairs. +//| PulseOut is used to pulse PWM "carrier" output on and off. This is commonly +//| used in infrared remotes. The pulsed signal consists of timed on and off +//| periods. Unlike PWM, there is no set duration for on and off pairs.""" //| -//| .. class:: PulseOut(carrier) +//| def __init__(self, carrier: pulseio.PWMOut): +//| """Create a PulseOut object associated with the given PWMout object. //| -//| Create a PulseOut object associated with the given PWMout object. +//| :param ~pulseio.PWMOut carrier: PWMOut that is set to output on the desired pin. //| -//| :param ~pulseio.PWMOut carrier: PWMOut that is set to output on the desired pin. +//| Send a short series of pulses:: //| -//| Send a short series of pulses:: +//| import array +//| import pulseio +//| import board //| -//| import array -//| import pulseio -//| import board +//| # 50% duty cycle at 38kHz. +//| pwm = pulseio.PWMOut(board.D13, frequency=38000, duty_cycle=32768) +//| pulse = pulseio.PulseOut(pwm) +//| # on off on off on +//| pulses = array.array('H', [65000, 1000, 65000, 65000, 1000]) +//| pulse.send(pulses) //| -//| # 50% duty cycle at 38kHz. -//| pwm = pulseio.PWMOut(board.D13, frequency=38000, duty_cycle=32768) -//| pulse = pulseio.PulseOut(pwm) -//| # on off on off on -//| pulses = array.array('H', [65000, 1000, 65000, 65000, 1000]) -//| pulse.send(pulses) -//| -//| # Modify the array of pulses. -//| pulses[0] = 200 -//| pulse.send(pulses) +//| # Modify the array of pulses. +//| pulses[0] = 200 +//| pulse.send(pulses)""" +//| ... //| STATIC mp_obj_t pulseio_pulseout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 1, 1, false); @@ -85,9 +86,9 @@ STATIC mp_obj_t pulseio_pulseout_make_new(const mp_obj_type_t *type, size_t n_ar return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitialises the PulseOut and releases any hardware resources for reuse. +//| def deinit(self, ) -> Any: +//| """Deinitialises the PulseOut and releases any hardware resources for reuse.""" +//| ... //| STATIC mp_obj_t pulseio_pulseout_deinit(mp_obj_t self_in) { pulseio_pulseout_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -96,16 +97,16 @@ STATIC mp_obj_t pulseio_pulseout_deinit(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(pulseio_pulseout_deinit_obj, pulseio_pulseout_deinit); -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t pulseio_pulseout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -114,16 +115,16 @@ STATIC mp_obj_t pulseio_pulseout_obj___exit__(size_t n_args, const mp_obj_t *arg } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pulseio_pulseout___exit___obj, 4, 4, pulseio_pulseout_obj___exit__); -//| .. method:: send(pulses) -//| -//| Pulse alternating on and off durations in microseconds starting with on. -//| ``pulses`` must be an `array.array` with data type 'H' for unsigned -//| halfword (two bytes). +//| def send(self, pulses: array.array) -> Any: +//| """Pulse alternating on and off durations in microseconds starting with on. +//| ``pulses`` must be an `array.array` with data type 'H' for unsigned +//| halfword (two bytes). //| -//| This method waits until the whole array of pulses has been sent and -//| ensures the signal is off afterwards. +//| This method waits until the whole array of pulses has been sent and +//| ensures the signal is off afterwards. //| -//| :param array.array pulses: pulse durations in microseconds +//| :param array.array pulses: pulse durations in microseconds""" +//| ... //| STATIC mp_obj_t pulseio_pulseout_obj_send(mp_obj_t self_in, mp_obj_t pulses) { pulseio_pulseout_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/pulseio/__init__.c b/shared-bindings/pulseio/__init__.c index a3cec3dca..70cb61fc3 100644 --- a/shared-bindings/pulseio/__init__.c +++ b/shared-bindings/pulseio/__init__.c @@ -35,7 +35,7 @@ #include "shared-bindings/pulseio/PulseOut.h" #include "shared-bindings/pulseio/PWMOut.h" -//| :mod:`pulseio` --- Support for pulse based protocols +//| """:mod:`pulseio` --- Support for pulse based protocols //| ===================================================== //| //| .. module:: pulseio @@ -73,7 +73,7 @@ //| :py:data:`~pulseio.PWMOut.duty_cycle`, and then sleep 0.1 seconds. //| CircuitPython will automatically turn off the PWM when it resets all //| hardware after program completion. Use ``deinit()`` or a ``with`` statement -//| to do it yourself. +//| to do it yourself.""" //| STATIC const mp_rom_map_elem_t pulseio_module_globals_table[] = { diff --git a/shared-bindings/random/__init__.c b/shared-bindings/random/__init__.c index de4c90910..d8b266be0 100644 --- a/shared-bindings/random/__init__.c +++ b/shared-bindings/random/__init__.c @@ -33,7 +33,7 @@ #include "shared-bindings/random/__init__.h" #include "supervisor/shared/translate.h" -//| :mod:`random` --- pseudo-random numbers and choices +//| """:mod:`random` --- pseudo-random numbers and choices //| ======================================================== //| //| .. module:: random @@ -49,13 +49,13 @@ //| Once seeded, it will be deterministic, which is why its bad for cryptography. //| //| .. warning:: Numbers from this module are not cryptographically strong! Use -//| bytes from `os.urandom` directly for true randomness. +//| bytes from `os.urandom` directly for true randomness.""" //| -//| .. function:: seed(seed) -//| -//| Sets the starting seed of the random number generation. Further calls to -//| `random` will return deterministic results afterwards. +//| def seed(seed: Any) -> Any: +//| """Sets the starting seed of the random number generation. Further calls to +//| `random` will return deterministic results afterwards.""" +//| ... //| STATIC mp_obj_t random_seed(mp_obj_t seed_in) { mp_uint_t seed = mp_obj_get_int_truncated(seed_in); @@ -64,9 +64,9 @@ STATIC mp_obj_t random_seed(mp_obj_t seed_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(random_seed_obj, random_seed); -//| .. function:: getrandbits(k) -//| -//| Returns an integer with *k* random bits. +//| def getrandbits(k: Any) -> Any: +//| """Returns an integer with *k* random bits.""" +//| ... //| STATIC mp_obj_t random_getrandbits(mp_obj_t num_in) { int n = mp_obj_get_int(num_in); @@ -77,10 +77,9 @@ STATIC mp_obj_t random_getrandbits(mp_obj_t num_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(random_getrandbits_obj, random_getrandbits); -//| .. function:: randrange(stop) -//| randrange(start, stop, step=1) -//| -//| Returns a randomly selected integer from ``range(start, stop, step)``. +//| def randrange(stop: Any) -> Any: +//| """Returns a randomly selected integer from ``range(start, stop, step)``.""" +//| ... //| STATIC mp_obj_t random_randrange(size_t n_args, const mp_obj_t *args) { mp_int_t start = 0; @@ -120,10 +119,10 @@ STATIC mp_obj_t random_randrange(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(random_randrange_obj, 1, 3, random_randrange); -//| .. function:: randint(a, b) -//| -//| Returns a randomly selected integer between a and b inclusive. Equivalent -//| to ``randrange(a, b + 1, 1)`` +//| def randint(a: Any, b: Any) -> Any: +//| """Returns a randomly selected integer between a and b inclusive. Equivalent +//| to ``randrange(a, b + 1, 1)``""" +//| ... //| STATIC mp_obj_t random_randint(mp_obj_t a_in, mp_obj_t b_in) { mp_int_t a = mp_obj_get_int(a_in); @@ -135,10 +134,10 @@ STATIC mp_obj_t random_randint(mp_obj_t a_in, mp_obj_t b_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(random_randint_obj, random_randint); -//| .. function:: choice(seq) -//| -//| Returns a randomly selected element from the given sequence. Raises -//| IndexError when the sequence is empty. +//| def choice(seq: Any) -> Any: +//| """Returns a randomly selected element from the given sequence. Raises +//| IndexError when the sequence is empty.""" +//| ... //| STATIC mp_obj_t random_choice(mp_obj_t seq) { mp_int_t len = mp_obj_get_int(mp_obj_len(seq)); @@ -149,19 +148,19 @@ STATIC mp_obj_t random_choice(mp_obj_t seq) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(random_choice_obj, random_choice); -//| .. function:: random() -//| -//| Returns a random float between 0 and 1.0. +//| def random() -> Any: +//| """Returns a random float between 0 and 1.0.""" +//| ... //| STATIC mp_obj_t random_random(void) { return mp_obj_new_float(shared_modules_random_random()); } STATIC MP_DEFINE_CONST_FUN_OBJ_0(random_random_obj, random_random); -//| .. function:: uniform(a, b) -//| -//| Returns a random float between a and b. It may or may not be inclusive -//| depending on float rounding. +//| def uniform(a: Any, b: Any) -> Any: +//| """Returns a random float between a and b. It may or may not be inclusive +//| depending on float rounding.""" +//| ... //| STATIC mp_obj_t random_uniform(mp_obj_t a_in, mp_obj_t b_in) { mp_float_t a = mp_obj_get_float(a_in); -- cgit v1.2.3 From c7a9d49cba38499ec6701fdfef0c14e1dd5503a8 Mon Sep 17 00:00:00 2001 From: dherrada Date: Mon, 11 May 2020 13:00:19 -0400 Subject: Did rgbmatrix, rotaryio, and RTC --- shared-bindings/rgbmatrix/RGBMatrix.c | 103 +++++++++++++------------- shared-bindings/rgbmatrix/__init__.c | 5 +- shared-bindings/rotaryio/IncrementalEncoder.c | 72 +++++++++--------- shared-bindings/rotaryio/__init__.c | 4 +- shared-bindings/rtc/RTC.c | 49 ++++++------ shared-bindings/rtc/__init__.c | 30 ++++---- 6 files changed, 132 insertions(+), 131 deletions(-) diff --git a/shared-bindings/rgbmatrix/RGBMatrix.c b/shared-bindings/rgbmatrix/RGBMatrix.c index d758774d9..e2393eb61 100644 --- a/shared-bindings/rgbmatrix/RGBMatrix.c +++ b/shared-bindings/rgbmatrix/RGBMatrix.c @@ -38,10 +38,11 @@ #include "shared-module/framebufferio/__init__.h" #include "shared-module/framebufferio/FramebufferDisplay.h" -//| .. currentmodule:: rgbmatrix +//| class RGBMatrix: +//| """.. currentmodule:: rgbmatrix //| -//| :class:`RGBMatrix` -- Driver for HUB75-style RGB LED matrices -//| ================================================================ +//| :class:`RGBMatrix` -- Driver for HUB75-style RGB LED matrices +//| ================================================================ //| extern Protomatter_core *_PM_protoPtr; @@ -133,45 +134,45 @@ STATIC void preflight_pins_or_throw(uint8_t clock_pin, uint8_t *rgb_pins, uint8_ } } -//| :class:`~rgbmatrix.RGBMatrix` displays an in-memory framebuffer to an LED matrix. -//| -//| .. class:: RGBMatrix(*, width, bit_depth, rgb_pins, addr_pins, clock_pin, latch_pin, output_enable_pin, doublebuffer=True, framebuffer=None, height=0) + +//| :class:`~rgbmatrix.RGBMatrix` displays an in-memory framebuffer to an LED matrix.""" //| -//| Create a RGBMatrix object with the given attributes. The height of -//| the display is determined by the number of rgb and address pins: -//| len(rgb_pins) // 3 * 2 ** len(address_pins). With 6 RGB pins and 4 -//| address lines, the display will be 32 pixels tall. If the optional height -//| parameter is specified and is not 0, it is checked against the calculated -//| height. +//| def __init__(self, *, width: Any, bit_depth: Any, rgb_pins: Any, addr_pins: Any, clock_pin: Any, latch_pin: Any, output_enable_pin: Any, doublebuffer: Any = True, framebuffer: Any = None, height: Any = 0): +//| """Create a RGBMatrix object with the given attributes. The height of +//| the display is determined by the number of rgb and address pins: +//| len(rgb_pins) // 3 * 2 ** len(address_pins). With 6 RGB pins and 4 +//| address lines, the display will be 32 pixels tall. If the optional height +//| parameter is specified and is not 0, it is checked against the calculated +//| height. //| -//| Up to 30 RGB pins and 8 address pins are supported. +//| Up to 30 RGB pins and 8 address pins are supported. //| -//| The RGB pins must be within a single "port" and performance and memory -//| usage are best when they are all within "close by" bits of the port. -//| The clock pin must also be on the same port as the RGB pins. See the -//| documentation of the underlying protomatter C library for more -//| information. Generally, Adafruit's interface boards are designed so -//| that these requirements are met when matched with the intended -//| microcontroller board. For instance, the Feather M4 Express works -//| together with the RGB Matrix Feather. +//| The RGB pins must be within a single "port" and performance and memory +//| usage are best when they are all within "close by" bits of the port. +//| The clock pin must also be on the same port as the RGB pins. See the +//| documentation of the underlying protomatter C library for more +//| information. Generally, Adafruit's interface boards are designed so +//| that these requirements are met when matched with the intended +//| microcontroller board. For instance, the Feather M4 Express works +//| together with the RGB Matrix Feather. //| -//| The framebuffer is in "RGB565" format. +//| The framebuffer is in "RGB565" format. //| -//| "RGB565" means that it is organized as a series of 16-bit numbers -//| where the highest 5 bits are interpreted as red, the next 6 as -//| green, and the final 5 as blue. The object can be any buffer, but -//| `array.array` and `ulab.array` objects are most often useful. -//| To update the content, modify the framebuffer and call refresh. +//| "RGB565" means that it is organized as a series of 16-bit numbers +//| where the highest 5 bits are interpreted as red, the next 6 as +//| green, and the final 5 as blue. The object can be any buffer, but +//| `array.array` and `ulab.array` objects are most often useful. +//| To update the content, modify the framebuffer and call refresh. //| -//| If a framebuffer is not passed in, one is allocated and initialized -//| to all black. In any case, the framebuffer can be retrieved -//| by passing the RGBMatrix object to memoryview(). +//| If a framebuffer is not passed in, one is allocated and initialized +//| to all black. In any case, the framebuffer can be retrieved +//| by passing the RGBMatrix object to memoryview(). //| -//| If doublebuffer is False, some memory is saved, but the display may -//| flicker during updates. +//| If doublebuffer is False, some memory is saved, but the display may +//| flicker during updates. //| -//| A RGBMatrix is often used in conjunction with a -//| `framebufferio.FramebufferDisplay`. +//| A RGBMatrix is often used in conjunction with a +//| `framebufferio.FramebufferDisplay`.""" //| STATIC mp_obj_t rgbmatrix_rgbmatrix_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { @@ -245,11 +246,11 @@ STATIC mp_obj_t rgbmatrix_rgbmatrix_make_new(const mp_obj_type_t *type, size_t n return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit -//| -//| Free the resources (pins, timers, etc.) associated with this -//| rgbmatrix instance. After deinitialization, no further operations -//| may be performed. +//| def deinit(self, ) -> Any: +//| """Free the resources (pins, timers, etc.) associated with this +//| rgbmatrix instance. After deinitialization, no further operations +//| may be performed.""" +//| ... //| STATIC mp_obj_t rgbmatrix_rgbmatrix_deinit(mp_obj_t self_in) { rgbmatrix_rgbmatrix_obj_t *self = (rgbmatrix_rgbmatrix_obj_t*)self_in; @@ -265,10 +266,9 @@ static void check_for_deinit(rgbmatrix_rgbmatrix_obj_t *self) { } } -//| .. attribute:: brightness -//| -//| In the current implementation, 0.0 turns the display off entirely -//| and any other value up to 1.0 turns the display on fully. +//| brightness: Any = ... +//| """In the current implementation, 0.0 turns the display off entirely +//| and any other value up to 1.0 turns the display on fully.""" //| STATIC mp_obj_t rgbmatrix_rgbmatrix_get_brightness(mp_obj_t self_in) { rgbmatrix_rgbmatrix_obj_t *self = (rgbmatrix_rgbmatrix_obj_t*)self_in; @@ -297,10 +297,9 @@ const mp_obj_property_t rgbmatrix_rgbmatrix_brightness_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: refresh() -//| -//| Transmits the color data in the buffer to the pixels so that -//| they are shown. +//| def refresh(self, ) -> Any: ... +//| """Transmits the color data in the buffer to the pixels so that +//| they are shown.""" //| STATIC mp_obj_t rgbmatrix_rgbmatrix_refresh(mp_obj_t self_in) { rgbmatrix_rgbmatrix_obj_t *self = (rgbmatrix_rgbmatrix_obj_t*)self_in; @@ -310,9 +309,8 @@ STATIC mp_obj_t rgbmatrix_rgbmatrix_refresh(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(rgbmatrix_rgbmatrix_refresh_obj, rgbmatrix_rgbmatrix_refresh); -//| .. attribute:: width -//| -//| The width of the display, in pixels +//| width: Any = ... +//| """The width of the display, in pixels""" //| STATIC mp_obj_t rgbmatrix_rgbmatrix_get_width(mp_obj_t self_in) { rgbmatrix_rgbmatrix_obj_t *self = (rgbmatrix_rgbmatrix_obj_t*)self_in; @@ -327,9 +325,8 @@ const mp_obj_property_t rgbmatrix_rgbmatrix_width_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: height -//| -//| The height of the display, in pixels +//| height: Any = ... +//| """The height of the display, in pixels""" //| STATIC mp_obj_t rgbmatrix_rgbmatrix_get_height(mp_obj_t self_in) { rgbmatrix_rgbmatrix_obj_t *self = (rgbmatrix_rgbmatrix_obj_t*)self_in; diff --git a/shared-bindings/rgbmatrix/__init__.c b/shared-bindings/rgbmatrix/__init__.c index 662d2c4f6..f61002a78 100644 --- a/shared-bindings/rgbmatrix/__init__.c +++ b/shared-bindings/rgbmatrix/__init__.c @@ -31,7 +31,7 @@ #include "shared-bindings/rgbmatrix/RGBMatrix.h" -//| :mod:`rgbmatrix` --- Low-level routines for bitbanged LED matrices +//| """:mod:`rgbmatrix` --- Low-level routines for bitbanged LED matrices //| ===================================================================== //| //| .. module:: rgbmatrix @@ -40,7 +40,8 @@ //| .. toctree:: //| :maxdepth: 3 //| -//| RGBMatrix +//| RGBMatrix""" +//| STATIC const mp_rom_map_elem_t rgbmatrix_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_rgbmatrix) }, diff --git a/shared-bindings/rotaryio/IncrementalEncoder.c b/shared-bindings/rotaryio/IncrementalEncoder.c index 058241d24..a10fb6fd5 100644 --- a/shared-bindings/rotaryio/IncrementalEncoder.c +++ b/shared-bindings/rotaryio/IncrementalEncoder.c @@ -34,35 +34,36 @@ #include "shared-bindings/rotaryio/IncrementalEncoder.h" #include "shared-bindings/util.h" -//| .. currentmodule:: rotaryio +//| class IncrementalEncoder: +//| """.. currentmodule:: rotaryio //| -//| :class:`IncrementalEncoder` -- Track the relative position of an incremental encoder -//| ==================================================================================== +//| :class:`IncrementalEncoder` -- Track the relative position of an incremental encoder +//| ==================================================================================== //| -//| IncrementalEncoder determines the relative rotational position based on two series of pulses. +//| IncrementalEncoder determines the relative rotational position based on two series of pulses.""" //| -//| .. class:: IncrementalEncoder(pin_a, pin_b) +//| def __init__(self, pin_a: microcontroller.Pin, pin_b: microcontroller.Pin): +//| """Create an IncrementalEncoder object associated with the given pins. It tracks the positional +//| state of an incremental rotary encoder (also known as a quadrature encoder.) Position is +//| relative to the position when the object is contructed. //| -//| Create an IncrementalEncoder object associated with the given pins. It tracks the positional -//| state of an incremental rotary encoder (also known as a quadrature encoder.) Position is -//| relative to the position when the object is contructed. +//| :param ~microcontroller.Pin pin_a: First pin to read pulses from. +//| :param ~microcontroller.Pin pin_b: Second pin to read pulses from. //| -//| :param ~microcontroller.Pin pin_a: First pin to read pulses from. -//| :param ~microcontroller.Pin pin_b: Second pin to read pulses from. +//| For example:: //| -//| For example:: +//| import rotaryio +//| import time +//| from board import * //| -//| import rotaryio -//| import time -//| from board import * -//| -//| enc = rotaryio.IncrementalEncoder(D1, D2) -//| last_position = None -//| while True: -//| position = enc.position -//| if last_position == None or position != last_position: -//| print(position) -//| last_position = position +//| enc = rotaryio.IncrementalEncoder(D1, D2) +//| last_position = None +//| while True: +//| position = enc.position +//| if last_position == None or position != last_position: +//| print(position) +//| last_position = position""" +//| ... //| STATIC mp_obj_t rotaryio_incrementalencoder_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_pin_a, ARG_pin_b }; @@ -84,9 +85,9 @@ STATIC mp_obj_t rotaryio_incrementalencoder_make_new(const mp_obj_type_t *type, return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitializes the IncrementalEncoder and releases any hardware resources for reuse. +//| def deinit(self, ) -> Any: +//| """Deinitializes the IncrementalEncoder and releases any hardware resources for reuse.""" +//| ... //| STATIC mp_obj_t rotaryio_incrementalencoder_deinit(mp_obj_t self_in) { rotaryio_incrementalencoder_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -101,16 +102,16 @@ STATIC void check_for_deinit(rotaryio_incrementalencoder_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t rotaryio_incrementalencoder_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -120,10 +121,9 @@ STATIC mp_obj_t rotaryio_incrementalencoder_obj___exit__(size_t n_args, const mp STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(rotaryio_incrementalencoder___exit___obj, 4, 4, rotaryio_incrementalencoder_obj___exit__); -//| .. attribute:: position -//| -//| The current position in terms of pulses. The number of pulses per rotation is defined by the -//| specific hardware. +//| position: Any = ... +//| """The current position in terms of pulses. The number of pulses per rotation is defined by the +//| specific hardware.""" //| STATIC mp_obj_t rotaryio_incrementalencoder_obj_get_position(mp_obj_t self_in) { rotaryio_incrementalencoder_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/rotaryio/__init__.c b/shared-bindings/rotaryio/__init__.c index a0166771a..0cc8eb556 100644 --- a/shared-bindings/rotaryio/__init__.c +++ b/shared-bindings/rotaryio/__init__.c @@ -33,7 +33,7 @@ #include "shared-bindings/rotaryio/__init__.h" #include "shared-bindings/rotaryio/IncrementalEncoder.h" -//| :mod:`rotaryio` --- Support for reading rotation sensors +//| """:mod:`rotaryio` --- Support for reading rotation sensors //| ======================================================== //| //| .. module:: rotaryio @@ -59,7 +59,7 @@ //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either //| call :py:meth:`!deinit` or use a context manager. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| :ref:`lifetime-and-contextmanagers` for more info.""" //| STATIC const mp_rom_map_elem_t rotaryio_module_globals_table[] = { diff --git a/shared-bindings/rtc/RTC.c b/shared-bindings/rtc/RTC.c index 3ff09a4ec..8a3e89d73 100644 --- a/shared-bindings/rtc/RTC.c +++ b/shared-bindings/rtc/RTC.c @@ -38,14 +38,19 @@ const rtc_rtc_obj_t rtc_rtc_obj = {{&rtc_rtc_type}}; -//| .. currentmodule:: rtc -//| -//| :class:`RTC` --- Real Time Clock -//| -------------------------------- + + + + +//| class RTC: +//| """.. currentmodule:: rtc //| -//| .. class:: RTC() +//| :class:`RTC` --- Real Time Clock +//| --------------------------------""" //| -//| This class represents the onboard Real Time Clock. It is a singleton and will always return the same instance. +//| def __init__(self, ): +//| """This class represents the onboard Real Time Clock. It is a singleton and will always return the same instance.""" +//| ... //| STATIC mp_obj_t rtc_rtc_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { // No arguments @@ -55,25 +60,24 @@ STATIC mp_obj_t rtc_rtc_make_new(const mp_obj_type_t *type, size_t n_args, const return (mp_obj_t)&rtc_rtc_obj; } -//| .. attribute:: datetime -//| -//| The current date and time of the RTC as a `time.struct_time`. +//| datetime: Any = ... +//| """The current date and time of the RTC as a `time.struct_time`. //| -//| This must be set to the current date and time whenever the board loses power:: +//| This must be set to the current date and time whenever the board loses power:: //| -//| import rtc -//| import time +//| import rtc +//| import time //| -//| r = rtc.RTC() -//| r.datetime = rtctime.struct_time((2019, 5, 29, 15, 14, 15, 0, -1, -1)) +//| r = rtc.RTC() +//| r.datetime = rtctime.struct_time((2019, 5, 29, 15, 14, 15, 0, -1, -1)) //| //| -//| Once set, the RTC will automatically update this value as time passes. You can read this -//| property to get a snapshot of the current time:: +//| Once set, the RTC will automatically update this value as time passes. You can read this +//| property to get a snapshot of the current time:: //| -//| current_time = r.datetime -//| print(current_time) -//| # struct_time(tm_year=2019, tm_month=5, ...) +//| current_time = r.datetime +//| print(current_time) +//| # struct_time(tm_year=2019, tm_month=5, ...)""" //| STATIC mp_obj_t rtc_rtc_obj_get_datetime(mp_obj_t self_in) { timeutils_struct_time_t tm; @@ -97,12 +101,11 @@ const mp_obj_property_t rtc_rtc_datetime_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: calibration -//| -//| The RTC calibration value as an `int`. +//| calibration: Any = ... +//| """The RTC calibration value as an `int`. //| //| A positive value speeds up the clock and a negative value slows it down. -//| Range and value is hardware specific, but one step is often approximately 1 ppm. +//| Range and value is hardware specific, but one step is often approximately 1 ppm.""" //| STATIC mp_obj_t rtc_rtc_obj_get_calibration(mp_obj_t self_in) { int calibration = common_hal_rtc_get_calibration(); diff --git a/shared-bindings/rtc/__init__.c b/shared-bindings/rtc/__init__.c index 22eda9b66..66669ca5f 100644 --- a/shared-bindings/rtc/__init__.c +++ b/shared-bindings/rtc/__init__.c @@ -31,7 +31,7 @@ #include "shared-bindings/rtc/RTC.h" #include "shared-bindings/time/__init__.h" -//| :mod:`rtc` --- Real Time Clock +//| """:mod:`rtc` --- Real Time Clock //| ======================================================== //| //| .. module:: rtc @@ -47,7 +47,7 @@ //| .. toctree:: //| :maxdepth: 3 //| -//| RTC +//| RTC""" //| void rtc_reset(void) { @@ -62,22 +62,22 @@ mp_obj_t rtc_get_time_source_time(void) { return struct_time_from_tm(&tm); } -//| .. function:: set_time_source(rtc) +//| def set_time_source(rtc: Any) -> Any: +//| """Sets the RTC time source used by :func:`time.localtime`. +//| The default is :class:`rtc.RTC`, but it's useful to use this to override the +//| time source for testing purposes. For example:: //| -//| Sets the RTC time source used by :func:`time.localtime`. -//| The default is :class:`rtc.RTC`, but it's useful to use this to override the -//| time source for testing purposes. For example:: +//| import rtc +//| import time //| -//| import rtc -//| import time +//| class RTC(object): +//| @property +//| def datetime(self): +//| return time.struct_time((2018, 3, 17, 21, 1, 47, 0, 0, 0)) //| -//| class RTC(object): -//| @property -//| def datetime(self): -//| return time.struct_time((2018, 3, 17, 21, 1, 47, 0, 0, 0)) -//| -//| r = RTC() -//| rtc.set_time_source(r) +//| r = RTC() +//| rtc.set_time_source(r)""" +//| ... //| STATIC mp_obj_t rtc_set_time_source(mp_obj_t time_source) { MP_STATE_VM(rtc_time_source) = time_source; -- cgit v1.2.3 From 603df58f971743bc36b9e391cd5fb04812262533 Mon Sep 17 00:00:00 2001 From: dherrada Date: Mon, 11 May 2020 13:40:02 -0400 Subject: Did stage, socket, storage --- shared-bindings/_stage/Layer.c | 45 +++++------ shared-bindings/_stage/Text.c | 37 ++++----- shared-bindings/_stage/__init__.c | 12 +-- shared-bindings/socket/__init__.c | 156 +++++++++++++++++++------------------ shared-bindings/storage/__init__.c | 138 ++++++++++++++++---------------- 5 files changed, 196 insertions(+), 192 deletions(-) diff --git a/shared-bindings/_stage/Layer.c b/shared-bindings/_stage/Layer.c index 12028b131..437114cd3 100644 --- a/shared-bindings/_stage/Layer.c +++ b/shared-bindings/_stage/Layer.c @@ -30,25 +30,26 @@ #include "Layer.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: _stage +//| class Layer: +//| """.. currentmodule:: _stage //| -//| :class:`Layer` -- Keep information about a single layer of graphics -//| =================================================================== +//| :class:`Layer` -- Keep information about a single layer of graphics +//| ===================================================================""" //| -//| .. class:: Layer(width, height, graphic, palette, [grid]) +//| def __init__(self, width: int, height: int, graphic: bytearray, palette: bytearray, grid: bytearray): +//| """Keep internal information about a layer of graphics (either a +//| ``Grid`` or a ``Sprite``) in a format suitable for fast rendering +//| with the ``render()`` function. //| -//| Keep internal information about a layer of graphics (either a -//| ``Grid`` or a ``Sprite``) in a format suitable for fast rendering -//| with the ``render()`` function. +//| :param int width: The width of the grid in tiles, or 1 for sprites. +//| :param int height: The height of the grid in tiles, or 1 for sprites. +//| :param bytearray graphic: The graphic data of the tiles. +//| :param bytearray palette: The color palette to be used. +//| :param bytearray grid: The contents of the grid map. //| -//| :param int width: The width of the grid in tiles, or 1 for sprites. -//| :param int height: The height of the grid in tiles, or 1 for sprites. -//| :param bytearray graphic: The graphic data of the tiles. -//| :param bytearray palette: The color palette to be used. -//| :param bytearray grid: The contents of the grid map. -//| -//| This class is intended for internal use in the ``stage`` library and -//| it shouldn't be used on its own. +//| This class is intended for internal use in the ``stage`` library and +//| it shouldn't be used on its own.""" +//| ... //| STATIC mp_obj_t layer_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { @@ -90,9 +91,9 @@ STATIC mp_obj_t layer_make_new(const mp_obj_type_t *type, size_t n_args, return MP_OBJ_FROM_PTR(self); } -//| .. method:: move(x, y) -//| -//| Set the offset of the layer to the specified values. +//| def move(self, x: Any, y: Any) -> Any: +//| """Set the offset of the layer to the specified values.""" +//| ... //| STATIC mp_obj_t layer_move(mp_obj_t self_in, mp_obj_t x_in, mp_obj_t y_in) { layer_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -102,10 +103,10 @@ STATIC mp_obj_t layer_move(mp_obj_t self_in, mp_obj_t x_in, mp_obj_t y_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(layer_move_obj, layer_move); -//| .. method:: frame(frame, rotation) -//| -//| Set the animation frame of the sprite, and optionally rotation its -//| graphic. +//| def frame(self, frame: Any, rotation: Any) -> Any: +//| """Set the animation frame of the sprite, and optionally rotation its +//| graphic.""" +//| ... //| STATIC mp_obj_t layer_frame(mp_obj_t self_in, mp_obj_t frame_in, mp_obj_t rotation_in) { diff --git a/shared-bindings/_stage/Text.c b/shared-bindings/_stage/Text.c index 49c1d00ca..8797f74db 100644 --- a/shared-bindings/_stage/Text.c +++ b/shared-bindings/_stage/Text.c @@ -30,25 +30,26 @@ #include "Text.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: _stage +//| class Text: +//| """.. currentmodule:: _stage //| -//| :class:`Text` -- Keep information about a single text of text -//| ============================================================== +//| :class:`Text` -- Keep information about a single text of text +//| ==============================================================""" //| -//| .. class:: Text(width, height, font, palette, chars) +//| def __init__(self, width: int, height: int, font: bytearray, palette: bytearray, chars: bytearray): +//| """Keep internal information about a text of text +//| in a format suitable for fast rendering +//| with the ``render()`` function. //| -//| Keep internal information about a text of text -//| in a format suitable for fast rendering -//| with the ``render()`` function. +//| :param int width: The width of the grid in tiles, or 1 for sprites. +//| :param int height: The height of the grid in tiles, or 1 for sprites. +//| :param bytearray font: The font data of the characters. +//| :param bytearray palette: The color palette to be used. +//| :param bytearray chars: The contents of the character grid. //| -//| :param int width: The width of the grid in tiles, or 1 for sprites. -//| :param int height: The height of the grid in tiles, or 1 for sprites. -//| :param bytearray font: The font data of the characters. -//| :param bytearray palette: The color palette to be used. -//| :param bytearray chars: The contents of the character grid. -//| -//| This class is intended for internal use in the ``stage`` library and -//| it shouldn't be used on its own. +//| This class is intended for internal use in the ``stage`` library and +//| it shouldn't be used on its own.""" +//| ... //| STATIC mp_obj_t text_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { @@ -84,9 +85,9 @@ STATIC mp_obj_t text_make_new(const mp_obj_type_t *type, size_t n_args, return MP_OBJ_FROM_PTR(self); } -//| .. method:: move(x, y) -//| -//| Set the offset of the text to the specified values. +//| def move(self, x: Any, y: Any) -> Any: +//| """Set the offset of the text to the specified values.""" +//| ... //| STATIC mp_obj_t text_move(mp_obj_t self_in, mp_obj_t x_in, mp_obj_t y_in) { text_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/_stage/__init__.c b/shared-bindings/_stage/__init__.c index 4bac280bf..6b5c4fd8b 100644 --- a/shared-bindings/_stage/__init__.c +++ b/shared-bindings/_stage/__init__.c @@ -34,7 +34,7 @@ #include "Layer.h" #include "Text.h" -//| :mod:`_stage` --- C-level helpers for animation of sprites on a stage +//| """:mod:`_stage` --- C-level helpers for animation of sprites on a stage //| ===================================================================== //| //| .. module:: _stage @@ -49,11 +49,10 @@ //| :maxdepth: 3 //| //| Layer -//| Text +//| Text""" //| -//| .. function:: render(x0, y0, x1, y1, layers, buffer, display[, scale[, background]]) -//| -//| Render and send to the display a fragment of the screen. +//| def render(x0: int, y0: int, x1: int, y1: int, layers: list, buffer: bytearray, display: displayio.Display, scale: int, background: int) -> Any: +//| """Render and send to the display a fragment of the screen. //| //| :param int x0: Left edge of the fragment. //| :param int y0: Top edge of the fragment. @@ -70,7 +69,8 @@ //| valid. //| //| This function is intended for internal use in the ``stage`` library -//| and all the necessary checks are performed there. +//| and all the necessary checks are performed there.""" +//| STATIC mp_obj_t stage_render(size_t n_args, const mp_obj_t *args) { uint16_t x0 = mp_obj_get_int(args[0]); uint16_t y0 = mp_obj_get_int(args[1]); diff --git a/shared-bindings/socket/__init__.c b/shared-bindings/socket/__init__.c index 2d6c16e90..4c0811bdb 100644 --- a/shared-bindings/socket/__init__.c +++ b/shared-bindings/socket/__init__.c @@ -37,27 +37,28 @@ #include "shared-module/network/__init__.h" -//| :mod:`socket` --- TCP, UDP and RAW socket support +//| """:mod:`socket` --- TCP, UDP and RAW socket support //| ================================================= //| //| .. module:: socket //| :synopsis: TCP, UDP and RAW sockets //| :platform: SAMD21, SAMD51 //| -//| Create TCP, UDP and RAW sockets for communicating over the Internet. +//| Create TCP, UDP and RAW sockets for communicating over the Internet.""" //| STATIC const mp_obj_type_t socket_type; -//| .. currentmodule:: socket +//| class socket: +//| """.. currentmodule:: socket""" //| -//| .. class:: socket(family, type, proto) +//| def __init__(self, family: int, type: int, proto: int): +//| """Create a new socket //| -//| Create a new socket -//| -//| :param ~int family: AF_INET or AF_INET6 -//| :param ~int type: SOCK_STREAM, SOCK_DGRAM or SOCK_RAW -//| :param ~int proto: IPPROTO_TCP, IPPROTO_UDP or IPPROTO_RAW (ignored) +//| :param ~int family: AF_INET or AF_INET6 +//| :param ~int type: SOCK_STREAM, SOCK_DGRAM or SOCK_RAW +//| :param ~int proto: IPPROTO_TCP, IPPROTO_UDP or IPPROTO_RAW (ignored)""" +//| ... //| STATIC mp_obj_t socket_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { @@ -98,11 +99,11 @@ STATIC void socket_select_nic(mod_network_socket_obj_t *self, const byte *ip) { } } -//| .. method:: bind(address) -//| -//| Bind a socket to an address +//| def bind(self, address: tuple) -> Any: +//| """Bind a socket to an address //| -//| :param ~tuple address: tuple of (remote_address, remote_port) +//| :param ~tuple address: tuple of (remote_address, remote_port)""" +//| ... //| STATIC mp_obj_t socket_bind(mp_obj_t self_in, mp_obj_t addr_in) { @@ -125,11 +126,11 @@ STATIC mp_obj_t socket_bind(mp_obj_t self_in, mp_obj_t addr_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socket_bind_obj, socket_bind); -//| .. method:: listen(backlog) -//| -//| Set socket to listen for incoming connections +//| def listen(self, backlog: int) -> Any: +//| """Set socket to listen for incoming connections //| -//| :param ~int backlog: length of backlog queue for waiting connetions +//| :param ~int backlog: length of backlog queue for waiting connetions""" +//| ... //| STATIC mp_obj_t socket_listen(mp_obj_t self_in, mp_obj_t backlog) { @@ -150,11 +151,10 @@ STATIC mp_obj_t socket_listen(mp_obj_t self_in, mp_obj_t backlog) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socket_listen_obj, socket_listen); -//| .. method:: accept() -//| -//| Accept a connection on a listening socket of type SOCK_STREAM, -//| creating a new socket of type SOCK_STREAM. -//| Returns a tuple of (new_socket, remote_address) +//| def accept(self, ) -> Any: +//| """Accept a connection on a listening socket of type SOCK_STREAM, +//| creating a new socket of type SOCK_STREAM. +//| Returns a tuple of (new_socket, remote_address)""" //| STATIC mp_obj_t socket_accept(mp_obj_t self_in) { @@ -188,11 +188,11 @@ STATIC mp_obj_t socket_accept(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(socket_accept_obj, socket_accept); -//| .. method:: connect(address) -//| -//| Connect a socket to a remote address +//| def connect(self, address: tuple) -> Any: +//| """Connect a socket to a remote address //| -//| :param ~tuple address: tuple of (remote_address, remote_port) +//| :param ~tuple address: tuple of (remote_address, remote_port)""" +//| ... //| STATIC mp_obj_t socket_connect(mp_obj_t self_in, mp_obj_t addr_in) { @@ -215,12 +215,12 @@ STATIC mp_obj_t socket_connect(mp_obj_t self_in, mp_obj_t addr_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socket_connect_obj, socket_connect); -//| .. method:: send(bytes) -//| -//| Send some bytes to the connected remote address. -//| Suits sockets of type SOCK_STREAM +//| def send(self, bytes: bytes) -> Any: +//| """Send some bytes to the connected remote address. +//| Suits sockets of type SOCK_STREAM //| -//| :param ~bytes bytes: some bytes to send +//| :param ~bytes bytes: some bytes to send""" +//| ... //| STATIC mp_obj_t socket_send(mp_obj_t self_in, mp_obj_t buf_in) { @@ -252,19 +252,20 @@ STATIC mp_int_t _socket_recv_into(mod_network_socket_obj_t *sock, byte *buf, mp_ } -//| .. method:: recv_into(buffer[, bufsize]) +//| def recv_into(self, buffer: bytearray, bufsize: int) -> Any: +//| """Reads some bytes from the connected remote address, writing +//| into the provided buffer. If bufsize <= len(buffer) is given, +//| a maximum of bufsize bytes will be read into the buffer. If no +//| valid value is given for bufsize, the default is the length of +//| the given buffer. //| -//| Reads some bytes from the connected remote address, writing -//| into the provided buffer. If bufsize <= len(buffer) is given, -//| a maximum of bufsize bytes will be read into the buffer. If no -//| valid value is given for bufsize, the default is the length of -//| the given buffer. +//| Suits sockets of type SOCK_STREAM +//| Returns an int of number of bytes read. //| -//| Suits sockets of type SOCK_STREAM -//| Returns an int of number of bytes read. +//| :param bytearray buffer: buffer to receive into +//| :param int bufsize: optionally, a maximum number of bytes to read.""" +//| ... //| -//| :param bytearray buffer: buffer to receive into -//| :param int bufsize: optionally, a maximum number of bytes to read. STATIC mp_obj_t socket_recv_into(size_t n_args, const mp_obj_t *args) { mod_network_socket_obj_t *self = MP_OBJ_TO_PTR(args[0]); @@ -287,13 +288,14 @@ STATIC mp_obj_t socket_recv_into(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(socket_recv_into_obj, 2, 3, socket_recv_into); -//| .. method:: recv(bufsize) +//| def recv(self, bufsize: int) -> Any: +//| """Reads some bytes from the connected remote address. +//| Suits sockets of type SOCK_STREAM +//| Returns a bytes() of length <= bufsize //| -//| Reads some bytes from the connected remote address. -//| Suits sockets of type SOCK_STREAM -//| Returns a bytes() of length <= bufsize +//| :param ~int bufsize: maximum number of bytes to receive""" +//| ... //| -//| :param ~int bufsize: maximum number of bytes to receive STATIC mp_obj_t socket_recv(mp_obj_t self_in, mp_obj_t len_in) { mod_network_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -313,13 +315,13 @@ STATIC mp_obj_t socket_recv(mp_obj_t self_in, mp_obj_t len_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socket_recv_obj, socket_recv); -//| .. method:: sendto(bytes, address) +//| def sendto(self, bytes: bytes, address: tuple) -> Any: +//| """Send some bytes to a specific address. +//| Suits sockets of type SOCK_DGRAM //| -//| Send some bytes to a specific address. -//| Suits sockets of type SOCK_DGRAM -//| -//| :param ~bytes bytes: some bytes to send -//| :param ~tuple address: tuple of (remote_address, remote_port) +//| :param ~bytes bytes: some bytes to send +//| :param ~tuple address: tuple of (remote_address, remote_port)""" +//| ... //| STATIC mp_obj_t socket_sendto(mp_obj_t self_in, mp_obj_t data_in, mp_obj_t addr_in) { @@ -347,16 +349,16 @@ STATIC mp_obj_t socket_sendto(mp_obj_t self_in, mp_obj_t data_in, mp_obj_t addr_ } STATIC MP_DEFINE_CONST_FUN_OBJ_3(socket_sendto_obj, socket_sendto); -//| .. method:: recvfrom(bufsize) -//| -//| Reads some bytes from the connected remote address. -//| Suits sockets of type SOCK_STREAM +//| def recvfrom(self, bufsize: int) -> Any: +//| """Reads some bytes from the connected remote address. +//| Suits sockets of type SOCK_STREAM //| -//| Returns a tuple containing -//| * a bytes() of length <= bufsize -//| * a remote_address, which is a tuple of ip address and port number +//| Returns a tuple containing +//| * a bytes() of length <= bufsize +//| * a remote_address, which is a tuple of ip address and port number //| -//| :param ~int bufsize: maximum number of bytes to receive +//| :param ~int bufsize: maximum number of bytes to receive""" +//| ... //| STATIC mp_obj_t socket_recvfrom(mp_obj_t self_in, mp_obj_t len_in) { @@ -386,9 +388,9 @@ STATIC mp_obj_t socket_recvfrom(mp_obj_t self_in, mp_obj_t len_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socket_recvfrom_obj, socket_recvfrom); -//| .. method:: setsockopt(level, optname, value) -//| -//| Sets socket options +//| def setsockopt(self, level: Any, optname: Any, value: Any) -> Any: +//| """Sets socket options""" +//| ... //| STATIC mp_obj_t socket_setsockopt(size_t n_args, const mp_obj_t *args) { @@ -420,11 +422,11 @@ STATIC mp_obj_t socket_setsockopt(size_t n_args, const mp_obj_t *args) { } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(socket_setsockopt_obj, 4, 4, socket_setsockopt); -//| .. method:: settimeout(value) +//| def settimeout(self, value: int) -> Any: +//| """Set the timeout value for this socket. //| -//| Set the timeout value for this socket. -//| -//| :param ~int value: timeout in seconds. 0 means non-blocking. None means block indefinitely. +//| :param ~int value: timeout in seconds. 0 means non-blocking. None means block indefinitely.""" +//| ... //| STATIC mp_obj_t socket_settimeout(mp_obj_t self_in, mp_obj_t timeout_in) { @@ -451,11 +453,11 @@ STATIC mp_obj_t socket_settimeout(mp_obj_t self_in, mp_obj_t timeout_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socket_settimeout_obj, socket_settimeout); -//| .. method:: setblocking(flag) -//| -//| Set the blocking behaviour of this socket. +//| def setblocking(self, flag: bool) -> Any: +//| """Set the blocking behaviour of this socket. //| -//| :param ~bool flag: False means non-blocking, True means block indefinitely. +//| :param ~bool flag: False means non-blocking, True means block indefinitely.""" +//| ... //| // method socket.setblocking(flag) @@ -513,13 +515,13 @@ STATIC const mp_obj_type_t socket_type = { .locals_dict = (mp_obj_dict_t*)&socket_locals_dict, }; -//| .. function:: getaddrinfo(host, port) -//| -//| Gets the address information for a hostname and port +//| def getaddrinfo(host: Any, port: Any) -> Any: +//| """Gets the address information for a hostname and port //| -//| Returns the appropriate family, socket type, socket protocol and -//| address information to call socket.socket() and socket.connect() with, -//| as a tuple. +//| Returns the appropriate family, socket type, socket protocol and +//| address information to call socket.socket() and socket.connect() with, +//| as a tuple.""" +//| ... //| STATIC mp_obj_t socket_getaddrinfo(mp_obj_t host_in, mp_obj_t port_in) { diff --git a/shared-bindings/storage/__init__.c b/shared-bindings/storage/__init__.c index ba439b951..feb1a9bd7 100644 --- a/shared-bindings/storage/__init__.c +++ b/shared-bindings/storage/__init__.c @@ -35,7 +35,7 @@ #include "shared-bindings/storage/__init__.h" #include "supervisor/shared/translate.h" -//| :mod:`storage` --- storage management +//| """:mod:`storage` --- storage management //| ======================================================== //| //| .. module:: storage @@ -45,16 +45,16 @@ //| The `storage` provides storage management functionality such as mounting and //| unmounting which is typically handled by the operating system hosting Python. //| CircuitPython does not have an OS, so this module provides this functionality -//| directly. +//| directly.""" //| -//| .. function:: mount(filesystem, mount_path, *, readonly=False) +//| def mount(filesystem: Any, mount_path: Any, *, readonly: bool = False) -> Any: +//| """Mounts the given filesystem object at the given path. //| -//| Mounts the given filesystem object at the given path. +//| This is the CircuitPython analog to the UNIX ``mount`` command. //| -//| This is the CircuitPython analog to the UNIX ``mount`` command. -//| -//| :param bool readonly: True when the filesystem should be readonly to CircuitPython. +//| :param bool readonly: True when the filesystem should be readonly to CircuitPython.""" +//| ... //| mp_obj_t storage_mount(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_readonly }; @@ -85,12 +85,12 @@ mp_obj_t storage_mount(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_arg } MP_DEFINE_CONST_FUN_OBJ_KW(storage_mount_obj, 2, storage_mount); -//| .. function:: umount(mount) -//| -//| Unmounts the given filesystem object or if *mount* is a path, then unmount -//| the filesystem mounted at that location. +//| def umount(mount: Any) -> Any: +//| """Unmounts the given filesystem object or if *mount* is a path, then unmount +//| the filesystem mounted at that location. //| -//| This is the CircuitPython analog to the UNIX ``umount`` command. +//| This is the CircuitPython analog to the UNIX ``umount`` command.""" +//| ... //| mp_obj_t storage_umount(mp_obj_t mnt_in) { if (MP_OBJ_IS_STR(mnt_in)) { @@ -103,15 +103,15 @@ mp_obj_t storage_umount(mp_obj_t mnt_in) { } MP_DEFINE_CONST_FUN_OBJ_1(storage_umount_obj, storage_umount); -//| .. function:: remount(mount_path, readonly=False, *, disable_concurrent_write_protection=False) +//| def remount(mount_path: Any, readonly: bool = False, *, disable_concurrent_write_protection: bool = False) -> Any: +//| """Remounts the given path with new parameters. //| -//| Remounts the given path with new parameters. -//| -//| :param bool readonly: True when the filesystem should be readonly to CircuitPython. -//| :param bool disable_concurrent_write_protection: When True, the check that makes sure the -//| underlying filesystem data is written by one computer is disabled. Disabling the protection -//| allows CircuitPython and a host to write to the same filesystem with the risk that the -//| filesystem will be corrupted. +//| :param bool readonly: True when the filesystem should be readonly to CircuitPython. +//| :param bool disable_concurrent_write_protection: When True, the check that makes sure the +//| underlying filesystem data is written by one computer is disabled. Disabling the protection +//| allows CircuitPython and a host to write to the same filesystem with the risk that the +//| filesystem will be corrupted.""" +//| ... //| mp_obj_t storage_remount(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_readonly, ARG_disable_concurrent_write_protection }; @@ -133,28 +133,29 @@ mp_obj_t storage_remount(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_a } MP_DEFINE_CONST_FUN_OBJ_KW(storage_remount_obj, 1, storage_remount); -//| .. function:: getmount(mount_path) -//| -//| Retrieves the mount object associated with the mount path +//| def getmount(mount_path: Any) -> Any: +//| """Retrieves the mount object associated with the mount path""" +//| ... //| mp_obj_t storage_getmount(const mp_obj_t mnt_in) { return common_hal_storage_getmount(mp_obj_str_get_str(mnt_in)); } MP_DEFINE_CONST_FUN_OBJ_1(storage_getmount_obj, storage_getmount); -//| .. function:: erase_filesystem() +//| def erase_filesystem() -> Any: +//| """Erase and re-create the ``CIRCUITPY`` filesystem. //| -//| Erase and re-create the ``CIRCUITPY`` filesystem. +//| On boards that present USB-visible ``CIRCUITPY`` drive (e.g., SAMD21 and SAMD51), +//| then call `microcontroller.reset()` to restart CircuitPython and have the +//| host computer remount CIRCUITPY. //| -//| On boards that present USB-visible ``CIRCUITPY`` drive (e.g., SAMD21 and SAMD51), -//| then call `microcontroller.reset()` to restart CircuitPython and have the -//| host computer remount CIRCUITPY. +//| This function can be called from the REPL when ``CIRCUITPY`` +//| has become corrupted. //| -//| This function can be called from the REPL when ``CIRCUITPY`` -//| has become corrupted. +//| .. warning:: All the data on ``CIRCUITPY`` will be lost, and +//| CircuitPython will restart on certain boards.""" +//| ... //| -//| .. warning:: All the data on ``CIRCUITPY`` will be lost, and -//| CircuitPython will restart on certain boards. mp_obj_t storage_erase_filesystem(void) { common_hal_storage_erase_filesystem(); @@ -171,54 +172,53 @@ STATIC const mp_rom_map_elem_t storage_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR_getmount), MP_ROM_PTR(&storage_getmount_obj) }, { MP_ROM_QSTR(MP_QSTR_erase_filesystem), MP_ROM_PTR(&storage_erase_filesystem_obj) }, - //| .. class:: VfsFat(block_device) - //| - //| Create a new VfsFat filesystem around the given block device. - //| - //| :param block_device: Block device the the filesystem lives on - //| - //| .. attribute:: label - //| - //| The filesystem label, up to 11 case-insensitive bytes. Note that - //| this property can only be set when the device is writable by the - //| microcontroller. - //| - //| .. method:: mkfs() - //| - //| Format the block device, deleting any data that may have been there - //| - //| .. method:: open(path, mode) - //| - //| Like builtin ``open()`` - //| - //| .. method:: ilistdir([path]) - //| - //| Return an iterator whose values describe files and folders within - //| ``path`` - //| - //| .. method:: mkdir(path) + //| class VfsFat: + //| def __init__(self, block_device: Any): ... + //| """Create a new VfsFat filesystem around the given block device. //| - //| Like `os.mkdir` + //| :param block_device: Block device the the filesystem lives on""" //| - //| .. method:: rmdir(path) + //| label: Any = ... + //| """The filesystem label, up to 11 case-insensitive bytes. Note that + //| this property can only be set when the device is writable by the + //| microcontroller.""" //| - //| Like `os.rmdir` + //| def mkfs(self, ) -> Any: + //| """Format the block device, deleting any data that may have been there""" + //| ... //| - //| .. method:: stat(path) + //| def open(self, path: Any, mode: Any) -> Any: + //| """Like builtin ``open()``""" + //| ... //| - //| Like `os.stat` + //| def ilistdir(self, path: Any) -> Any: + //| """Return an iterator whose values describe files and folders within + //| ``path``""" + //| ... //| - //| .. method:: statvfs(path) + //| def mkdir(self, path: Any) -> Any: + //| """Like `os.mkdir`""" + //| ... //| - //| Like `os.statvfs` + //| def rmdir(self, path: Any) -> Any: + //| """Like `os.rmdir`""" + //| ... //| - //| .. method:: mount(readonly, mkfs) + //| def stat(self, path: Any) -> Any: + //| """Like `os.stat`""" + //| ... //| - //| Don't call this directly, call `storage.mount`. + //| def statvfs(self, path: Any) -> Any: + //| """Like `os.statvfs`""" + //| ... //| - //| .. method:: umount() + //| def mount(self, readonly: Any, mkfs: Any) -> Any: + //| """Don't call this directly, call `storage.mount`.""" + //| ... //| - //| Don't call this directly, call `storage.umount`. + //| def umount(self, ) -> Any: + //| """Don't call this directly, call `storage.umount`.""" + //| ... //| { MP_ROM_QSTR(MP_QSTR_VfsFat), MP_ROM_PTR(&mp_fat_vfs_type) }, }; -- cgit v1.2.3 From 991045b9ce958db9d7102d621f4e7860301e4c21 Mon Sep 17 00:00:00 2001 From: dherrada Date: Tue, 12 May 2020 11:28:33 -0400 Subject: Did struct, supervisor, terminalio --- shared-bindings/struct/__init__.c | 48 +++++++++++++++++------------------ shared-bindings/supervisor/Runtime.c | 41 +++++++++++++++--------------- shared-bindings/supervisor/__init__.c | 47 +++++++++++++++++----------------- shared-bindings/terminalio/Terminal.c | 26 +++++++++---------- shared-bindings/terminalio/__init__.c | 4 +-- 5 files changed, 82 insertions(+), 84 deletions(-) diff --git a/shared-bindings/struct/__init__.c b/shared-bindings/struct/__init__.c index ea14b3763..3772f93a7 100644 --- a/shared-bindings/struct/__init__.c +++ b/shared-bindings/struct/__init__.c @@ -38,7 +38,7 @@ #include "shared-module/struct/__init__.h" #include "supervisor/shared/translate.h" -//| :mod:`struct` --- manipulation of c-style data +//| """:mod:`struct` --- manipulation of c-style data //| ======================================================== //| //| .. module:: struct @@ -52,13 +52,13 @@ //| Supported size/byte order prefixes: *@*, *<*, *>*, *!*. //| //| Supported format codes: *b*, *B*, *x*, *h*, *H*, *i*, *I*, *l*, *L*, *q*, *Q*, -//| *s*, *P*, *f*, *d* (the latter 2 depending on the floating-point support). +//| *s*, *P*, *f*, *d* (the latter 2 depending on the floating-point support).""" //| -//| .. function:: calcsize(fmt) -//| -//| Return the number of bytes needed to store the given fmt. +//| def calcsize(fmt: Any) -> Any: +//| """Return the number of bytes needed to store the given fmt.""" +//| ... //| STATIC mp_obj_t struct_calcsize(mp_obj_t fmt_in) { @@ -67,10 +67,10 @@ STATIC mp_obj_t struct_calcsize(mp_obj_t fmt_in) { } MP_DEFINE_CONST_FUN_OBJ_1(struct_calcsize_obj, struct_calcsize); -//| .. function:: pack(fmt, *values) -//| -//| Pack the values according to the format string fmt. -//| The return value is a bytes object encoding the values. +//| def pack(fmt: Any, *values: Any) -> Any: +//| """Pack the values according to the format string fmt. +//| The return value is a bytes object encoding the values.""" +//| ... //| STATIC mp_obj_t struct_pack(size_t n_args, const mp_obj_t *args) { @@ -85,10 +85,10 @@ STATIC mp_obj_t struct_pack(size_t n_args, const mp_obj_t *args) { } MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(struct_pack_obj, 1, MP_OBJ_FUN_ARGS_MAX, struct_pack); -//| .. function:: pack_into(fmt, buffer, offset, *values) -//| -//| Pack the values according to the format string fmt into a buffer -//| starting at offset. offset may be negative to count from the end of buffer. +//| def pack_into(fmt: Any, buffer: Any, offset: Any, *values: Any) -> Any: +//| """Pack the values according to the format string fmt into a buffer +//| starting at offset. offset may be negative to count from the end of buffer.""" +//| ... //| STATIC mp_obj_t struct_pack_into(size_t n_args, const mp_obj_t *args) { @@ -111,11 +111,11 @@ STATIC mp_obj_t struct_pack_into(size_t n_args, const mp_obj_t *args) { } MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(struct_pack_into_obj, 3, MP_OBJ_FUN_ARGS_MAX, struct_pack_into); -//| .. function:: unpack(fmt, data) -//| -//| Unpack from the data according to the format string fmt. The return value -//| is a tuple of the unpacked values. The buffer size must match the size -//| required by the format. +//| def unpack(fmt: Any, data: Any) -> Any: +//| """Unpack from the data according to the format string fmt. The return value +//| is a tuple of the unpacked values. The buffer size must match the size +//| required by the format.""" +//| ... //| STATIC mp_obj_t struct_unpack(size_t n_args, const mp_obj_t *args) { @@ -129,12 +129,12 @@ STATIC mp_obj_t struct_unpack(size_t n_args, const mp_obj_t *args) { } MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(struct_unpack_obj, 2, 3, struct_unpack); -//| .. function:: unpack_from(fmt, data, offset=0) -//| -//| Unpack from the data starting at offset according to the format string fmt. -//| offset may be negative to count from the end of buffer. The return value is -//| a tuple of the unpacked values. The buffer size must be at least as big -//| as the size required by the form. +//| def unpack_from(fmt: Any, data: Any, offset: Any = 0) -> Any: +//| """Unpack from the data starting at offset according to the format string fmt. +//| offset may be negative to count from the end of buffer. The return value is +//| a tuple of the unpacked values. The buffer size must be at least as big +//| as the size required by the form.""" +//| ... //| STATIC mp_obj_t struct_unpack_from(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { diff --git a/shared-bindings/supervisor/Runtime.c b/shared-bindings/supervisor/Runtime.c index 746dfe5ee..05921899c 100755 --- a/shared-bindings/supervisor/Runtime.c +++ b/shared-bindings/supervisor/Runtime.c @@ -29,35 +29,35 @@ #include "shared-bindings/supervisor/Runtime.h" //TODO: add USB, REPL to description once they're operational -//| .. currentmodule:: supervisor +//| class Runtime: +//| """.. currentmodule:: supervisor //| -//| :class:`Runtime` --- Supervisor Runtime information -//| ---------------------------------------------------- +//| :class:`Runtime` --- Supervisor Runtime information +//| ---------------------------------------------------- //| -//| Get current status of runtime objects. +//| Get current status of runtime objects. //| -//| Usage:: +//| Usage:: //| -//| import supervisor -//| if supervisor.runtime.serial_connected: -//| print("Hello World!") +//| import supervisor +//| if supervisor.runtime.serial_connected: +//| print("Hello World!")""" //| -//| .. class:: Runtime() -//| -//| You cannot create an instance of `supervisor.Runtime`. -//| Use `supervisor.runtime` to access the sole instance available. +//| def __init__(self, ): +//| """You cannot create an instance of `supervisor.Runtime`. +//| Use `supervisor.runtime` to access the sole instance available.""" +//| ... //| -//| .. attribute:: runtime.serial_connected -//| -//| Returns the USB serial communication status (read-only). +//| runtime.serial_connected: Any = ... +//| """Returns the USB serial communication status (read-only). //| //| .. note:: //| //| SAMD: Will return ``True`` if the USB serial connection //| has been established at any point. Will not reset if -//| USB is disconnected but power remains (e.g. battery connected) +//| USB is disconnected but power remains (e.g. battery connected)""" //| STATIC mp_obj_t supervisor_get_serial_connected(mp_obj_t self){ @@ -78,11 +78,10 @@ const mp_obj_property_t supervisor_serial_connected_obj = { }; -//| .. attribute:: runtime.serial_bytes_available -//| -//| Returns the whether any bytes are available to read -//| on the USB serial input. Allows for polling to see whether -//| to call the built-in input() or wait. (read-only) +//| runtime.serial_bytes_available: Any = ... +//| """Returns the whether any bytes are available to read +//| on the USB serial input. Allows for polling to see whether +//| to call the built-in input() or wait. (read-only)""" //| STATIC mp_obj_t supervisor_get_serial_bytes_available(mp_obj_t self){ if (!common_hal_get_serial_bytes_available()) { diff --git a/shared-bindings/supervisor/__init__.c b/shared-bindings/supervisor/__init__.c index 2705c8e58..7fe6668f4 100644 --- a/shared-bindings/supervisor/__init__.c +++ b/shared-bindings/supervisor/__init__.c @@ -36,7 +36,7 @@ #include "shared-bindings/supervisor/__init__.h" #include "shared-bindings/supervisor/Runtime.h" -//| :mod:`supervisor` --- Supervisor settings +//| """:mod:`supervisor` --- Supervisor settings //| ================================================= //| //| .. module:: supervisor @@ -50,19 +50,18 @@ //| .. toctree:: //| :maxdepth: 3 //| -//| Runtime +//| Runtime""" //| -//| .. attribute:: runtime -//| -//| Runtime information, such as `runtime.serial_connected` -//| (USB serial connection status). -//| This object is the sole instance of `supervisor.Runtime`. +//| runtime: Any = ... +//| """Runtime information, such as `runtime.serial_connected` +//| (USB serial connection status). +//| This object is the sole instance of `supervisor.Runtime`.""" //| -//| .. method:: enable_autoreload() -//| -//| Enable autoreload based on USB file write activity. +//| def enable_autoreload(self, ) -> Any: +//| """Enable autoreload based on USB file write activity.""" +//| ... //| STATIC mp_obj_t supervisor_enable_autoreload(void) { autoreload_enable(); @@ -70,10 +69,10 @@ STATIC mp_obj_t supervisor_enable_autoreload(void) { } MP_DEFINE_CONST_FUN_OBJ_0(supervisor_enable_autoreload_obj, supervisor_enable_autoreload); -//| .. method:: disable_autoreload() -//| -//| Disable autoreload based on USB file write activity until -//| `enable_autoreload` is called. +//| def disable_autoreload(self, ) -> Any: +//| """Disable autoreload based on USB file write activity until +//| `enable_autoreload` is called.""" +//| ... //| STATIC mp_obj_t supervisor_disable_autoreload(void) { autoreload_disable(); @@ -81,10 +80,10 @@ STATIC mp_obj_t supervisor_disable_autoreload(void) { } MP_DEFINE_CONST_FUN_OBJ_0(supervisor_disable_autoreload_obj, supervisor_disable_autoreload); -//| .. method:: set_rgb_status_brightness() -//| -//| Set brightness of status neopixel from 0-255 -//| `set_rgb_status_brightness` is called. +//| def set_rgb_status_brightness(self, ) -> Any: +//| """Set brightness of status neopixel from 0-255 +//| `set_rgb_status_brightness` is called.""" +//| ... //| STATIC mp_obj_t supervisor_set_rgb_status_brightness(mp_obj_t lvl){ // This must be int. If cast to uint8_t first, will never raise a ValueError. @@ -97,9 +96,9 @@ STATIC mp_obj_t supervisor_set_rgb_status_brightness(mp_obj_t lvl){ } MP_DEFINE_CONST_FUN_OBJ_1(supervisor_set_rgb_status_brightness_obj, supervisor_set_rgb_status_brightness); -//| .. method:: reload() -//| -//| Reload the main Python code and run it (equivalent to hitting Ctrl-D at the REPL). +//| def reload(self, ) -> Any: +//| """Reload the main Python code and run it (equivalent to hitting Ctrl-D at the REPL).""" +//| ... //| STATIC mp_obj_t supervisor_reload(void) { reload_requested = true; @@ -108,9 +107,9 @@ STATIC mp_obj_t supervisor_reload(void) { } MP_DEFINE_CONST_FUN_OBJ_0(supervisor_reload_obj, supervisor_reload); -//| .. method:: set_next_stack_limit(size) -//| -//| Set the size of the stack for the next vm run. If its too large, the default will be used. +//| def set_next_stack_limit(self, size: Any) -> Any: +//| """Set the size of the stack for the next vm run. If its too large, the default will be used.""" +//| ... //| STATIC mp_obj_t supervisor_set_next_stack_limit(mp_obj_t size_obj) { mp_int_t size = mp_obj_get_int(size_obj); diff --git a/shared-bindings/terminalio/Terminal.c b/shared-bindings/terminalio/Terminal.c index 9c01fba20..1288b7018 100644 --- a/shared-bindings/terminalio/Terminal.c +++ b/shared-bindings/terminalio/Terminal.c @@ -37,16 +37,16 @@ #include "shared-bindings/fontio/BuiltinFont.h" #include "supervisor/shared/translate.h" - -//| .. currentmodule:: terminalio -//| -//| :class:`Terminal` -- display a character stream with a TileGrid -//| ================================================================ +//| class Terminal: +//| """.. currentmodule:: terminalio //| -//| .. class:: Terminal(tilegrid, font) +//| :class:`Terminal` -- display a character stream with a TileGrid +//| ================================================================""" //| -//| Terminal manages tile indices and cursor position based on VT100 commands. The font should be -//| a `fontio.BuiltinFont` and the TileGrid's bitmap should match the font's bitmap. +//| def __init__(self, tilegrid: Any, font: Any): +//| """Terminal manages tile indices and cursor position based on VT100 commands. The font should be +//| a `fontio.BuiltinFont` and the TileGrid's bitmap should match the font's bitmap.""" +//| ... //| STATIC mp_obj_t terminalio_terminal_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { @@ -75,12 +75,12 @@ STATIC mp_obj_t terminalio_terminal_make_new(const mp_obj_type_t *type, size_t n // These are standard stream methods. Code is in py/stream.c. // -//| .. method:: write(buf) -//| -//| Write the buffer of bytes to the bus. +//| def write(self, buf: Any) -> Any: +//| """Write the buffer of bytes to the bus. //| -//| :return: the number of bytes written -//| :rtype: int or None +//| :return: the number of bytes written +//| :rtype: int or None""" +//| ... //| STATIC mp_uint_t terminalio_terminal_write(mp_obj_t self_in, const void *buf_in, mp_uint_t size, int *errcode) { terminalio_terminal_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/terminalio/__init__.c b/shared-bindings/terminalio/__init__.c index a9fe20f30..591be839a 100644 --- a/shared-bindings/terminalio/__init__.c +++ b/shared-bindings/terminalio/__init__.c @@ -35,7 +35,7 @@ #include "py/runtime.h" -//| :mod:`terminalio` --- Displays text in a TileGrid +//| """:mod:`terminalio` --- Displays text in a TileGrid //| ================================================= //| //| .. module:: terminalio @@ -49,7 +49,7 @@ //| .. toctree:: //| :maxdepth: 3 //| -//| Terminal +//| Terminal""" //| //| STATIC const mp_rom_map_elem_t terminalio_module_globals_table[] = { -- cgit v1.2.3 From e4589543fbe8df12f5c30101e94ddc0fa95cd29e Mon Sep 17 00:00:00 2001 From: dherrada Date: Tue, 12 May 2020 11:43:24 -0400 Subject: Did time, touchio, uheap --- shared-bindings/time/__init__.c | 103 +++++++++++++++++++------------------ shared-bindings/touchio/TouchIn.c | 68 ++++++++++++------------ shared-bindings/touchio/__init__.c | 4 +- shared-bindings/uheap/__init__.c | 12 ++--- 4 files changed, 93 insertions(+), 94 deletions(-) diff --git a/shared-bindings/time/__init__.c b/shared-bindings/time/__init__.c index 8d7f2f3fd..36eaa27f6 100644 --- a/shared-bindings/time/__init__.c +++ b/shared-bindings/time/__init__.c @@ -36,7 +36,7 @@ #include "shared-bindings/time/__init__.h" #include "supervisor/shared/translate.h" -//| :mod:`time` --- time and timing related functions +//| """:mod:`time` --- time and timing related functions //| ======================================================== //| //| .. module:: time @@ -45,15 +45,15 @@ //| //| The `time` module is a strict subset of the CPython `cpython:time` module. So, code //| written in MicroPython will work in CPython but not necessarily the other -//| way around. +//| way around.""" //| -//| .. function:: monotonic() +//| def monotonic() -> Any: +//| """Returns an always increasing value of time with an unknown reference +//| point. Only use it to compare against other values from `monotonic`. //| -//| Returns an always increasing value of time with an unknown reference -//| point. Only use it to compare against other values from `monotonic`. -//| -//| :return: the current monotonic time -//| :rtype: float +//| :return: the current monotonic time +//| :rtype: float""" +//| ... //| STATIC mp_obj_t time_monotonic(void) { uint64_t time64 = common_hal_time_monotonic(); @@ -62,11 +62,11 @@ STATIC mp_obj_t time_monotonic(void) { } MP_DEFINE_CONST_FUN_OBJ_0(time_monotonic_obj, time_monotonic); -//| .. function:: sleep(seconds) -//| -//| Sleep for a given number of seconds. +//| def sleep(seconds: float) -> Any: +//| """Sleep for a given number of seconds. //| -//| :param float seconds: the time to sleep in fractional seconds +//| :param float seconds: the time to sleep in fractional seconds""" +//| ... //| STATIC mp_obj_t time_sleep(mp_obj_t seconds_o) { #if MICROPY_PY_BUILTINS_FLOAT @@ -97,21 +97,22 @@ mp_obj_t struct_time_make_new(const mp_obj_type_t *type, size_t n_args, const mp return namedtuple_make_new(type, 9, tuple->items, NULL); } -//| .. class:: struct_time(time_tuple) +//| class struct_time: +//| def __init__(self, time_tuple: Any): +//| """Structure used to capture a date and time. Note that it takes a tuple! //| -//| Structure used to capture a date and time. Note that it takes a tuple! +//| :param tuple time_tuple: Tuple of time info: ``(tm_year, tm_mon, tm_mday, tm_hour, tm_min, tm_sec, tm_wday, tm_yday, tm_isdst)`` //| -//| :param tuple time_tuple: Tuple of time info: ``(tm_year, tm_mon, tm_mday, tm_hour, tm_min, tm_sec, tm_wday, tm_yday, tm_isdst)`` -//| -//| * ``tm_year``: the year, 2017 for example -//| * ``tm_month``: the month, range [1, 12] -//| * ``tm_mday``: the day of the month, range [1, 31] -//| * ``tm_hour``: the hour, range [0, 23] -//| * ``tm_minute``: the minute, range [0, 59] -//| * ``tm_sec``: the second, range [0, 61] -//| * ``tm_wday``: the day of the week, range [0, 6], Monday is 0 -//| * ``tm_yday``: the day of the year, range [1, 366], -1 indicates not known -//| * ``tm_isdst``: 1 when in daylight savings, 0 when not, -1 if unknown. +//| * ``tm_year``: the year, 2017 for example +//| * ``tm_month``: the month, range [1, 12] +//| * ``tm_mday``: the day of the month, range [1, 31] +//| * ``tm_hour``: the hour, range [0, 23] +//| * ``tm_minute``: the minute, range [0, 59] +//| * ``tm_sec``: the second, range [0, 61] +//| * ``tm_wday``: the day of the week, range [0, 6], Monday is 0 +//| * ``tm_yday``: the day of the year, range [1, 366], -1 indicates not known +//| * ``tm_isdst``: 1 when in daylight savings, 0 when not, -1 if unknown.""" +//| ... //| const mp_obj_namedtuple_type_t struct_time_type_obj = { .base = { @@ -194,12 +195,12 @@ mp_obj_t MP_WEAK rtc_get_time_source_time(void) { mp_raise_RuntimeError(translate("RTC is not supported on this board")); } -//| .. function:: time() -//| -//| Return the current time in seconds since since Jan 1, 1970. +//| def time() -> Any: +//| """Return the current time in seconds since since Jan 1, 1970. //| -//| :return: the current time -//| :rtype: int +//| :return: the current time +//| :rtype: int""" +//| ... //| STATIC mp_obj_t time_time(void) { timeutils_struct_time_t tm; @@ -210,12 +211,12 @@ STATIC mp_obj_t time_time(void) { } MP_DEFINE_CONST_FUN_OBJ_0(time_time_obj, time_time); -//| .. function:: monotonic_ns() +//| def monotonic_ns() -> Any: +//| """Return the time of the specified clock clk_id in nanoseconds. //| -//| Return the time of the specified clock clk_id in nanoseconds. -//| -//| :return: the current time -//| :rtype: int +//| :return: the current time +//| :rtype: int""" +//| ... //| STATIC mp_obj_t time_monotonic_ns(void) { uint64_t time64 = common_hal_time_monotonic_ns(); @@ -223,15 +224,15 @@ STATIC mp_obj_t time_monotonic_ns(void) { } MP_DEFINE_CONST_FUN_OBJ_0(time_monotonic_ns_obj, time_monotonic_ns); -//| .. function:: localtime([secs]) -//| -//| Convert a time expressed in seconds since Jan 1, 1970 to a struct_time in -//| local time. If secs is not provided or None, the current time as returned -//| by time() is used. -//| The earliest date for which it can generate a time is Jan 1, 2000. +//| def localtime(secs: Any) -> Any: +//| """Convert a time expressed in seconds since Jan 1, 1970 to a struct_time in +//| local time. If secs is not provided or None, the current time as returned +//| by time() is used. +//| The earliest date for which it can generate a time is Jan 1, 2000. //| -//| :return: the current time -//| :rtype: time.struct_time +//| :return: the current time +//| :rtype: time.struct_time""" +//| ... //| STATIC mp_obj_t time_localtime(size_t n_args, const mp_obj_t *args) { if (n_args == 0 || args[0] == mp_const_none) { @@ -256,15 +257,15 @@ STATIC mp_obj_t time_localtime(size_t n_args, const mp_obj_t *args) { } MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(time_localtime_obj, 0, 1, time_localtime); -//| .. function:: mktime(t) -//| -//| This is the inverse function of localtime(). Its argument is the -//| struct_time or full 9-tuple (since the dst flag is needed; use -1 as the -//| dst flag if it is unknown) which expresses the time in local time, not UTC. -//| The earliest date for which it can generate a time is Jan 1, 2000. +//| def mktime(t: Any) -> Any: +//| """This is the inverse function of localtime(). Its argument is the +//| struct_time or full 9-tuple (since the dst flag is needed; use -1 as the +//| dst flag if it is unknown) which expresses the time in local time, not UTC. +//| The earliest date for which it can generate a time is Jan 1, 2000. //| -//| :return: seconds -//| :rtype: int +//| :return: seconds +//| :rtype: int""" +//| ... //| STATIC mp_obj_t time_mktime(mp_obj_t t) { mp_obj_t *elem; diff --git a/shared-bindings/touchio/TouchIn.c b/shared-bindings/touchio/TouchIn.c index db53ec1bc..6d59a1744 100644 --- a/shared-bindings/touchio/TouchIn.c +++ b/shared-bindings/touchio/TouchIn.c @@ -38,27 +38,28 @@ #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" -//| .. currentmodule:: touchio +//| class TouchIn: +//| """.. currentmodule:: touchio //| -//| :class:`TouchIn` -- Read the state of a capacitive touch sensor -//| =================================================================== +//| :class:`TouchIn` -- Read the state of a capacitive touch sensor +//| =================================================================== //| -//| Usage:: +//| Usage:: //| -//| import touchio -//| from board import * +//| import touchio +//| from board import * //| -//| touch = touchio.TouchIn(A1) -//| while True: -//| if touch.value: -//| print("touched!") +//| touch = touchio.TouchIn(A1) +//| while True: +//| if touch.value: +//| print("touched!")""" //| -//| .. class:: TouchIn(pin) +//| def __init__(self, pin: microcontroller.Pin): +//| """Use the TouchIn on the given pin. //| -//| Use the TouchIn on the given pin. -//| -//| :param ~microcontroller.Pin pin: the pin to read from +//| :param ~microcontroller.Pin pin: the pin to read from""" +//| ... //| STATIC mp_obj_t touchio_touchin_make_new(const mp_obj_type_t *type, mp_uint_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { @@ -75,9 +76,9 @@ STATIC mp_obj_t touchio_touchin_make_new(const mp_obj_type_t *type, return (mp_obj_t) self; } -//| .. method:: deinit() -//| -//| Deinitialises the TouchIn and releases any hardware resources for reuse. +//| def deinit(self, ) -> Any: +//| """Deinitialises the TouchIn and releases any hardware resources for reuse.""" +//| ... //| STATIC mp_obj_t touchio_touchin_deinit(mp_obj_t self_in) { touchio_touchin_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -92,16 +93,16 @@ STATIC void check_for_deinit(touchio_touchin_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self, ) -> Any: +//| """No-op used by Context Managers.""" +//| ... //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self, ) -> Any: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... //| STATIC mp_obj_t touchio_touchin_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -110,11 +111,10 @@ STATIC mp_obj_t touchio_touchin_obj___exit__(size_t n_args, const mp_obj_t *args } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(touchio_touchin___exit___obj, 4, 4, touchio_touchin_obj___exit__); -//| .. attribute:: value +//| value: Any = ... +//| """Whether the touch pad is being touched or not. (read-only) //| -//| Whether the touch pad is being touched or not. (read-only) -//| -//| True when `raw_value` > `threshold`. +//| True when `raw_value` > `threshold`.""" //| STATIC mp_obj_t touchio_touchin_obj_get_value(mp_obj_t self_in) { touchio_touchin_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -131,9 +131,8 @@ const mp_obj_property_t touchio_touchin_value_obj = { }; -//| .. attribute:: raw_value -//| -//| The raw touch measurement as an `int`. (read-only) +//| raw_value: Any = ... +//| """The raw touch measurement as an `int`. (read-only)""" //| STATIC mp_obj_t touchio_touchin_obj_get_raw_value(mp_obj_t self_in) { touchio_touchin_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -151,14 +150,13 @@ const mp_obj_property_t touchio_touchin_raw_value_obj = { }; -//| .. attribute:: threshold -//| -//| Minimum `raw_value` needed to detect a touch (and for `value` to be `True`). +//| threshold: Any = ... +//| """Minimum `raw_value` needed to detect a touch (and for `value` to be `True`). //| //| When the **TouchIn** object is created, an initial `raw_value` is read from the pin, //| and then `threshold` is set to be 100 + that value. //| -//| You can adjust `threshold` to make the pin more or less sensitive. +//| You can adjust `threshold` to make the pin more or less sensitive.""" //| STATIC mp_obj_t touchio_touchin_obj_get_threshold(mp_obj_t self_in) { touchio_touchin_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/touchio/__init__.c b/shared-bindings/touchio/__init__.c index 6adbe09cf..96367f082 100644 --- a/shared-bindings/touchio/__init__.c +++ b/shared-bindings/touchio/__init__.c @@ -35,7 +35,7 @@ #include "py/runtime.h" -//| :mod:`touchio` --- Touch related IO +//| """:mod:`touchio` --- Touch related IO //| ================================================= //| //| .. module:: touchio @@ -66,7 +66,7 @@ //| print(touch_pin.value) //| //| This example will initialize the the device, and print the -//| :py:data:`~touchio.TouchIn.value`. +//| :py:data:`~touchio.TouchIn.value`.""" //| STATIC const mp_rom_map_elem_t touchio_module_globals_table[] = { diff --git a/shared-bindings/uheap/__init__.c b/shared-bindings/uheap/__init__.c index 0d699cd28..f1be30424 100644 --- a/shared-bindings/uheap/__init__.c +++ b/shared-bindings/uheap/__init__.c @@ -31,17 +31,17 @@ #include "shared-bindings/uheap/__init__.h" -//| :mod:`uheap` --- Heap size analysis +//| """:mod:`uheap` --- Heap size analysis //| ================================================================ //| //| .. module:: uheap -//| :synopsis: Heap size analysis +//| :synopsis: Heap size analysis""" //| -//| .. function:: info(object) -//| -//| Prints memory debugging info for the given object and returns the -//| estimated size. +//| def info(object: Any) -> Any: +//| """Prints memory debugging info for the given object and returns the +//| estimated size.""" +//| ... //| STATIC mp_obj_t uheap_info(mp_obj_t obj) { uint32_t size = shared_module_uheap_info(obj); -- cgit v1.2.3 From 6490137812eb9f0c0b08ad81bc77ea21f5f31d04 Mon Sep 17 00:00:00 2001 From: dherrada Date: Tue, 12 May 2020 12:08:46 -0400 Subject: Did usb_hid, usb_midi, ustack, wiznet --- shared-bindings/usb_hid/Device.c | 39 +++++++++++++------------- shared-bindings/usb_hid/__init__.c | 14 +++++----- shared-bindings/usb_midi/PortIn.c | 46 +++++++++++++++---------------- shared-bindings/usb_midi/PortOut.c | 27 +++++++++--------- shared-bindings/usb_midi/__init__.c | 4 +-- shared-bindings/ustack/__init__.c | 31 +++++++++++---------- shared-bindings/wiznet/__init__.c | 4 +-- shared-bindings/wiznet/wiznet5k.c | 55 ++++++++++++++++++------------------- 8 files changed, 110 insertions(+), 110 deletions(-) diff --git a/shared-bindings/usb_hid/Device.c b/shared-bindings/usb_hid/Device.c index b1097fb24..bcea5b2c5 100644 --- a/shared-bindings/usb_hid/Device.c +++ b/shared-bindings/usb_hid/Device.c @@ -27,27 +27,28 @@ #include "py/objproperty.h" #include "shared-bindings/usb_hid/Device.h" -//| .. currentmodule:: usb_hid +//| class Device: +//| """.. currentmodule:: usb_hid //| -//| :class:`Device` -- HID Device -//| ============================================ +//| :class:`Device` -- HID Device +//| ============================================ //| -//| Usage:: +//| Usage:: //| -//| import usb_hid +//| import usb_hid //| -//| mouse = usb_hid.devices[0] +//| mouse = usb_hid.devices[0] //| -//| mouse.send_report() +//| mouse.send_report()""" //| -//| .. class:: Device() +//| def __init__(self, ): +//| """Not currently dynamically supported.""" +//| ... //| -//| Not currently dynamically supported. -//| -//| .. method:: send_report(buf) -//| -//| Send a HID report. +//| def send_report(self, buf: Any) -> Any: +//| """Send a HID report.""" +//| ... //| STATIC mp_obj_t usb_hid_device_send_report(mp_obj_t self_in, mp_obj_t buffer) { usb_hid_device_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -60,9 +61,8 @@ STATIC mp_obj_t usb_hid_device_send_report(mp_obj_t self_in, mp_obj_t buffer) { } MP_DEFINE_CONST_FUN_OBJ_2(usb_hid_device_send_report_obj, usb_hid_device_send_report); -//| .. attribute:: usage_page -//| -//| The usage page of the device as an `int`. Can be thought of a category. (read-only) +//| usage_page: Any = ... +//| """The usage page of the device as an `int`. Can be thought of a category. (read-only)""" //| STATIC mp_obj_t usb_hid_device_obj_get_usage_page(mp_obj_t self_in) { usb_hid_device_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -77,12 +77,11 @@ const mp_obj_property_t usb_hid_device_usage_page_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: usage -//| -//| The functionality of the device as an int. (read-only) +//| usage: Any = ... +//| """The functionality of the device as an int. (read-only) //| //| For example, Keyboard is 0x06 within the generic desktop usage page 0x01. -//| Mouse is 0x02 within the same usage page. +//| Mouse is 0x02 within the same usage page.""" //| STATIC mp_obj_t usb_hid_device_obj_get_usage(mp_obj_t self_in) { usb_hid_device_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/usb_hid/__init__.c b/shared-bindings/usb_hid/__init__.c index 3ad5b06e0..3d0978d62 100644 --- a/shared-bindings/usb_hid/__init__.c +++ b/shared-bindings/usb_hid/__init__.c @@ -31,27 +31,27 @@ #include "shared-bindings/usb_hid/__init__.h" #include "shared-bindings/usb_hid/Device.h" -//| :mod:`usb_hid` --- USB Human Interface Device +//| """:mod:`usb_hid` --- USB Human Interface Device //| =========================================================== //| //| .. module:: usb_hid //| :synopsis: USB Human Interface Device //| :platform: SAMD21 //| -//| The `usb_hid` module allows you to output data as a HID device. +//| The `usb_hid` module allows you to output data as a HID device.""" //| -//| .. attribute:: usb_hid.devices -//| -//| Tuple of all active HID device interfaces. +//| usb_hid.devices: Any = ... +//| """Tuple of all active HID device interfaces.""" //| -//| Libraries +//| """Libraries //| //| .. toctree:: //| :maxdepth: 3 //| -//| Device +//| Device""" +//| STATIC const mp_rom_map_elem_t usb_hid_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_OBJ_NEW_QSTR(MP_QSTR_usb_hid) }, { MP_ROM_QSTR(MP_QSTR_devices), MP_ROM_PTR(&common_hal_usb_hid_devices) }, diff --git a/shared-bindings/usb_midi/PortIn.c b/shared-bindings/usb_midi/PortIn.c index e2df56e95..55a5865ca 100644 --- a/shared-bindings/usb_midi/PortIn.c +++ b/shared-bindings/usb_midi/PortIn.c @@ -35,39 +35,39 @@ #include "py/stream.h" #include "supervisor/shared/translate.h" - -//| .. currentmodule:: usb_midi -//| -//| :class:`PortIn` -- receives midi commands over USB -//| =================================================== +//| class PortIn: +//| """.. currentmodule:: usb_midi //| -//| .. class:: PortIn() +//| :class:`PortIn` -- receives midi commands over USB +//| ===================================================""" //| -//| You cannot create an instance of `usb_midi.PortIn`. +//| def __init__(self, ): +//| """You cannot create an instance of `usb_midi.PortIn`. //| -//| PortIn objects are constructed for every corresponding entry in the USB -//| descriptor and added to the ``usb_midi.ports`` tuple. +//| PortIn objects are constructed for every corresponding entry in the USB +//| descriptor and added to the ``usb_midi.ports`` tuple.""" +//| ... //| // These are standard stream methods. Code is in py/stream.c. // -//| .. method:: read(nbytes=None) -//| -//| Read characters. If ``nbytes`` is specified then read at most that many -//| bytes. Otherwise, read everything that arrives until the connection -//| times out. Providing the number of bytes expected is highly recommended -//| because it will be faster. -//| -//| :return: Data read -//| :rtype: bytes or None +//| def read(self, nbytes: Any = None) -> Any: +//| """Read characters. If ``nbytes`` is specified then read at most that many +//| bytes. Otherwise, read everything that arrives until the connection +//| times out. Providing the number of bytes expected is highly recommended +//| because it will be faster. //| -//| .. method:: readinto(buf, nbytes=None) +//| :return: Data read +//| :rtype: bytes or None""" +//| ... //| -//| Read bytes into the ``buf``. If ``nbytes`` is specified then read at most -//| that many bytes. Otherwise, read at most ``len(buf)`` bytes. +//| def readinto(self, buf: Any, nbytes: Any = None) -> Any: +//| """Read bytes into the ``buf``. If ``nbytes`` is specified then read at most +//| that many bytes. Otherwise, read at most ``len(buf)`` bytes. //| -//| :return: number of bytes read and stored into ``buf`` -//| :rtype: bytes or None +//| :return: number of bytes read and stored into ``buf`` +//| :rtype: bytes or None""" +//| ... //| // These three methods are used by the shared stream methods. diff --git a/shared-bindings/usb_midi/PortOut.c b/shared-bindings/usb_midi/PortOut.c index e3eddfaf5..d83eb53b6 100644 --- a/shared-bindings/usb_midi/PortOut.c +++ b/shared-bindings/usb_midi/PortOut.c @@ -35,28 +35,27 @@ #include "py/stream.h" #include "supervisor/shared/translate.h" - -//| .. currentmodule:: usb_midi -//| -//| :class:`PortOut` -- sends midi messages to a computer over USB -//| ============================================================== +//| class PortOut: +//| """.. currentmodule:: usb_midi //| -//| .. class:: PortOut() +//| :class:`PortOut` -- sends midi messages to a computer over USB +//| ==============================================================""" //| -//| You cannot create an instance of `usb_midi.PortOut`. +//| def __init__(self, ): +//| """You cannot create an instance of `usb_midi.PortOut`. //| -//| PortOut objects are constructed for every corresponding entry in the USB -//| descriptor and added to the ``usb_midi.ports`` tuple. +//| PortOut objects are constructed for every corresponding entry in the USB +//| descriptor and added to the ``usb_midi.ports`` tuple.""" //| // These are standard stream methods. Code is in py/stream.c. // -//| .. method:: write(buf) -//| -//| Write the buffer of bytes to the bus. +//| def write(self, buf: Any) -> Any: +//| """Write the buffer of bytes to the bus. //| -//| :return: the number of bytes written -//| :rtype: int or None +//| :return: the number of bytes written +//| :rtype: int or None""" +//| ... //| STATIC mp_uint_t usb_midi_portout_write(mp_obj_t self_in, const void *buf_in, mp_uint_t size, int *errcode) { diff --git a/shared-bindings/usb_midi/__init__.c b/shared-bindings/usb_midi/__init__.c index f57d3631b..2631d8a88 100644 --- a/shared-bindings/usb_midi/__init__.c +++ b/shared-bindings/usb_midi/__init__.c @@ -35,7 +35,7 @@ #include "py/runtime.h" -//| :mod:`usb_midi` --- MIDI over USB +//| """:mod:`usb_midi` --- MIDI over USB //| ================================================= //| //| .. module:: usb_midi @@ -49,7 +49,7 @@ //| :maxdepth: 3 //| //| PortIn -//| PortOut +//| PortOut""" //| //| mp_map_elem_t usb_midi_module_globals_table[] = { diff --git a/shared-bindings/ustack/__init__.c b/shared-bindings/ustack/__init__.c index 08b772e41..073840aba 100644 --- a/shared-bindings/ustack/__init__.c +++ b/shared-bindings/ustack/__init__.c @@ -31,17 +31,20 @@ #include "shared-bindings/ustack/__init__.h" -//| :mod:`ustack` --- Stack information and analysis + + + +//| """:mod:`ustack` --- Stack information and analysis //| ======================================================== //| //| .. module:: ustack -//| :synopsis: stack information functions +//| :synopsis: stack information functions""" //| #if MICROPY_MAX_STACK_USAGE -//| .. function:: max_stack_usage() -//| -//| Return the maximum excursion of the stack so far. +//| def max_stack_usage() -> Any: +//| """Return the maximum excursion of the stack so far.""" +//| ... //| STATIC mp_obj_t max_stack_usage(void) { return MP_OBJ_NEW_SMALL_INT(shared_module_ustack_max_stack_usage()); @@ -50,21 +53,21 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_0(max_stack_usage_obj, max_stack_usage); #endif // MICROPY_MAX_STACK_USAGE -//| .. function:: stack_size() -//| -//| Return the size of the entire stack. -//| Same as in micropython.mem_info(), but returns a value instead -//| of just printing it. +//| def stack_size() -> Any: +//| """Return the size of the entire stack. +//| Same as in micropython.mem_info(), but returns a value instead +//| of just printing it.""" +//| ... //| STATIC mp_obj_t stack_size(void) { return MP_OBJ_NEW_SMALL_INT(shared_module_ustack_stack_size()); } STATIC MP_DEFINE_CONST_FUN_OBJ_0(stack_size_obj, stack_size); -//| .. function:: stack_usage() -//| -//| Return how much stack is currently in use. -//| Same as micropython.stack_use(); duplicated here for convenience. +//| def stack_usage() -> Any: +//| """Return how much stack is currently in use. +//| Same as micropython.stack_use(); duplicated here for convenience.""" +//| ... //| STATIC mp_obj_t stack_usage(void) { return MP_OBJ_NEW_SMALL_INT(shared_module_ustack_stack_usage()); diff --git a/shared-bindings/wiznet/__init__.c b/shared-bindings/wiznet/__init__.c index e230deecc..5c8e8d3fd 100644 --- a/shared-bindings/wiznet/__init__.c +++ b/shared-bindings/wiznet/__init__.c @@ -35,7 +35,7 @@ #include "shared-module/network/__init__.h" -//| :mod:`wiznet` --- Support for WizNet hardware +//| """:mod:`wiznet` --- Support for WizNet hardware //| ============================================= //| //| .. module:: wiznet @@ -49,7 +49,7 @@ //| .. toctree:: //| :maxdepth: 3 //| -//| wiznet5k +//| wiznet5k""" //| extern const mod_network_nic_type_t mod_network_nic_type_wiznet5k; diff --git a/shared-bindings/wiznet/wiznet5k.c b/shared-bindings/wiznet/wiznet5k.c index 786978bfe..2e2ee3949 100644 --- a/shared-bindings/wiznet/wiznet5k.c +++ b/shared-bindings/wiznet/wiznet5k.c @@ -46,25 +46,26 @@ #include "shared-module/network/__init__.h" #include "shared-module/wiznet/wiznet5k.h" -//| .. currentmodule:: wiznet +//| class WIZNET5K: +//| """.. currentmodule:: wiznet //| -//| :class:`WIZNET5K` -- wrapper for Wiznet 5500 Ethernet interface -//| =============================================================== +//| :class:`WIZNET5K` -- wrapper for Wiznet 5500 Ethernet interface +//| ===============================================================""" //| -//| .. class:: WIZNET5K(spi, cs, rst, dhcp=True) +//| def __init__(self, spi: busio.SPI, cs: microcontroller.Pin, rst: microcontroller.Pin, dhcp: bool = True): +//| """Create a new WIZNET5500 interface using the specified pins //| -//| Create a new WIZNET5500 interface using the specified pins +//| :param ~busio.SPI spi: spi bus to use +//| :param ~microcontroller.Pin cs: pin to use for Chip Select +//| :param ~microcontroller.Pin rst: pin to use for Reset (optional) +//| :param bool dhcp: boolean flag, whether to start DHCP automatically (optional, keyword only, default True) //| -//| :param ~busio.SPI spi: spi bus to use -//| :param ~microcontroller.Pin cs: pin to use for Chip Select -//| :param ~microcontroller.Pin rst: pin to use for Reset (optional) -//| :param bool dhcp: boolean flag, whether to start DHCP automatically (optional, keyword only, default True) -//| -//| * The reset pin is optional: if supplied it is used to reset the -//| wiznet board before initialization. -//| * The SPI bus will be initialized appropriately by this library. -//| * At present, the WIZNET5K object is a singleton, so only one WizNet -//| interface is supported at a time. +//| * The reset pin is optional: if supplied it is used to reset the +//| wiznet board before initialization. +//| * The SPI bus will be initialized appropriately by this library. +//| * At present, the WIZNET5K object is a singleton, so only one WizNet +//| interface is supported at a time.""" +//| ... //| STATIC mp_obj_t wiznet5k_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { @@ -86,9 +87,8 @@ STATIC mp_obj_t wiznet5k_make_new(const mp_obj_type_t *type, size_t n_args, cons return ret; } -//| .. attribute:: connected -//| -//| (boolean, readonly) is this device physically connected? +//| connected: Any = ... +//| """(boolean, readonly) is this device physically connected?""" //| STATIC mp_obj_t wiznet5k_connected_get_value(mp_obj_t self_in) { @@ -104,11 +104,10 @@ const mp_obj_property_t wiznet5k_connected_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. attribute:: dhcp +//| dhcp: Any = ... +//| """(boolean, readwrite) is DHCP active on this device? //| -//| (boolean, readwrite) is DHCP active on this device? -//| -//| * set to True to activate DHCP, False to turn it off +//| * set to True to activate DHCP, False to turn it off""" //| STATIC mp_obj_t wiznet5k_dhcp_get_value(mp_obj_t self_in) { @@ -138,13 +137,13 @@ const mp_obj_property_t wiznet5k_dhcp_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| .. method:: ifconfig(params=None) -//| -//| Called without parameters, returns a tuple of -//| (ip_address, subnet_mask, gateway_address, dns_server) +//| def ifconfig(self, params: Any = None) -> Any: +//| """Called without parameters, returns a tuple of +//| (ip_address, subnet_mask, gateway_address, dns_server) //| -//| Or can be called with the same tuple to set those parameters. -//| Setting ifconfig parameters turns DHCP off, if it was on. +//| Or can be called with the same tuple to set those parameters. +//| Setting ifconfig parameters turns DHCP off, if it was on.""" +//| ... //| STATIC mp_obj_t wiznet5k_ifconfig(size_t n_args, const mp_obj_t *args) { -- cgit v1.2.3 From 4e8de3c554024d3ac89e9ee77b958a6932a64bec Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Tue, 12 May 2020 17:15:28 -0700 Subject: Swap sphinx to autoapi and the inline stubs --- .github/workflows/build.yml | 2 +- .gitignore | 2 + Makefile | 6 +- conf.py | 14 +- docs/c2rst.py | 31 -- ports/atmel-samd/README.rst | 2 +- ports/atmel-samd/bindings/samd/Clock.c | 36 +- ports/atmel-samd/bindings/samd/__init__.c | 19 +- setup.py | 8 +- shared-bindings/_bleio/Adapter.c | 5 +- shared-bindings/_bleio/Address.c | 9 +- shared-bindings/_bleio/Attribute.c | 6 +- shared-bindings/_bleio/Characteristic.c | 9 +- shared-bindings/_bleio/CharacteristicBuffer.c | 7 +- shared-bindings/_bleio/Connection.c | 14 +- shared-bindings/_bleio/Descriptor.c | 6 +- shared-bindings/_bleio/PacketBuffer.c | 26 +- shared-bindings/_bleio/ScanEntry.c | 9 +- shared-bindings/_bleio/ScanResults.c | 7 +- shared-bindings/_bleio/Service.c | 7 +- shared-bindings/_bleio/UUID.c | 9 +- shared-bindings/_bleio/__init__.c | 26 +- shared-bindings/_eve/__init__.c | 22 +- shared-bindings/_pew/PewPew.c | 7 +- shared-bindings/_pew/__init__.c | 12 +- shared-bindings/_pixelbuf/PixelBuf.c | 7 +- shared-bindings/_pixelbuf/__init__.c | 27 +- shared-bindings/_stage/Layer.c | 5 +- shared-bindings/_stage/Text.c | 7 +- shared-bindings/_stage/__init__.c | 16 +- shared-bindings/aesio/__init__.c | 17 +- shared-bindings/aesio/aes.c | 64 ++- shared-bindings/analogio/AnalogIn.c | 5 +- shared-bindings/analogio/AnalogOut.c | 7 +- shared-bindings/analogio/__init__.c | 15 +- shared-bindings/audiobusio/I2SOut.c | 7 +- shared-bindings/audiobusio/PDMIn.c | 7 +- shared-bindings/audiobusio/__init__.c | 15 +- shared-bindings/audiocore/RawSample.c | 13 +- shared-bindings/audiocore/WaveFile.c | 5 +- shared-bindings/audiocore/__init__.c | 17 +- shared-bindings/audioio/AudioOut.c | 7 +- shared-bindings/audioio/__init__.c | 14 +- shared-bindings/audiomixer/Mixer.c | 7 +- shared-bindings/audiomixer/MixerVoice.c | 5 +- shared-bindings/audiomixer/__init__.c | 16 +- shared-bindings/audiomp3/MP3Decoder.c | 7 +- shared-bindings/audiomp3/__init__.c | 15 +- shared-bindings/audiopwmio/PWMAudioOut.c | 7 +- shared-bindings/audiopwmio/__init__.c | 14 +- shared-bindings/bitbangio/I2C.c | 5 +- shared-bindings/bitbangio/OneWire.c | 5 +- shared-bindings/bitbangio/SPI.c | 5 +- shared-bindings/bitbangio/__init__.c | 16 +- shared-bindings/board/__init__.c | 6 +- shared-bindings/busio/I2C.c | 5 +- shared-bindings/busio/OneWire.c | 5 +- shared-bindings/busio/SPI.c | 7 +- shared-bindings/busio/UART.c | 5 +- shared-bindings/busio/__init__.c | 17 +- shared-bindings/digitalio/DigitalInOut.c | 5 +- shared-bindings/digitalio/Direction.c | 5 +- shared-bindings/digitalio/DriveMode.c | 5 +- shared-bindings/digitalio/Pull.c | 5 +- shared-bindings/digitalio/__init__.c | 17 +- shared-bindings/displayio/Bitmap.c | 7 +- shared-bindings/displayio/ColorConverter.c | 7 +- shared-bindings/displayio/Display.c | 5 +- shared-bindings/displayio/EPaperDisplay.c | 5 +- shared-bindings/displayio/FourWire.c | 7 +- shared-bindings/displayio/Group.c | 7 +- shared-bindings/displayio/I2CDisplay.c | 7 +- shared-bindings/displayio/OnDiskBitmap.c | 7 +- shared-bindings/displayio/Palette.c | 7 +- shared-bindings/displayio/ParallelBus.c | 7 +- shared-bindings/displayio/Shape.c | 7 +- shared-bindings/displayio/TileGrid.c | 5 +- shared-bindings/displayio/__init__.c | 27 +- shared-bindings/fontio/BuiltinFont.c | 7 +- shared-bindings/fontio/Glyph.c | 31 +- shared-bindings/fontio/__init__.c | 17 +- shared-bindings/framebufferio/FramebufferDisplay.c | 5 +- shared-bindings/framebufferio/__init__.c | 16 +- shared-bindings/frequencyio/FrequencyIn.c | 5 +- shared-bindings/frequencyio/__init__.c | 17 +- shared-bindings/gamepad/GamePad.c | 7 +- shared-bindings/gamepad/__init__.c | 12 +- shared-bindings/gamepadshift/GamePadShift.c | 5 +- shared-bindings/gamepadshift/__init__.c | 12 +- shared-bindings/help.c | 34 -- shared-bindings/help.rst | 31 ++ shared-bindings/i2cslave/I2CSlave.c | 36 +- shared-bindings/i2cslave/__init__.c | 14 +- shared-bindings/index.rst | 10 +- shared-bindings/math/__init__.c | 7 +- shared-bindings/microcontroller/Pin.c | 7 +- shared-bindings/microcontroller/Processor.c | 11 +- shared-bindings/microcontroller/RunMode.c | 5 +- shared-bindings/microcontroller/__init__.c | 20 +- shared-bindings/multiterminal/__init__.c | 7 +- shared-bindings/neopixel_write/__init__.c | 13 +- shared-bindings/network/__init__.c | 7 +- shared-bindings/nvm/ByteArray.c | 8 +- shared-bindings/nvm/__init__.c | 17 +- shared-bindings/os/__init__.c | 7 +- shared-bindings/ps2io/Ps2.c | 5 +- shared-bindings/ps2io/__init__.c | 14 +- shared-bindings/pulseio/PWMOut.c | 7 +- shared-bindings/pulseio/PulseIn.c | 12 +- shared-bindings/pulseio/PulseOut.c | 13 +- shared-bindings/pulseio/__init__.c | 16 +- shared-bindings/random/__init__.c | 7 +- shared-bindings/rgbmatrix/RGBMatrix.c | 14 +- shared-bindings/rgbmatrix/__init__.c | 11 +- shared-bindings/rotaryio/IncrementalEncoder.c | 7 +- shared-bindings/rotaryio/__init__.c | 18 +- shared-bindings/rtc/RTC.c | 13 +- shared-bindings/rtc/__init__.c | 16 +- shared-bindings/socket/__init__.c | 8 +- shared-bindings/storage/__init__.c | 7 +- shared-bindings/struct/__init__.c | 9 +- shared-bindings/supervisor/Runtime.c | 11 +- shared-bindings/supervisor/__init__.c | 30 +- shared-bindings/terminalio/Terminal.c | 5 +- shared-bindings/terminalio/__init__.c | 16 +- shared-bindings/time/__init__.c | 7 +- shared-bindings/touchio/TouchIn.c | 5 +- shared-bindings/touchio/__init__.c | 14 +- shared-bindings/uheap/__init__.c | 6 +- shared-bindings/ulab/__init__.pyi | 523 +++++++++++++++++++++ shared-bindings/ulab/__init__.rst | 523 --------------------- shared-bindings/usb_hid/Device.c | 5 +- shared-bindings/usb_hid/__init__.c | 15 +- shared-bindings/usb_midi/PortIn.c | 7 +- shared-bindings/usb_midi/PortOut.c | 5 +- shared-bindings/usb_midi/__init__.c | 17 +- shared-bindings/ustack/__init__.c | 10 +- shared-bindings/wiznet/__init__.c | 16 +- shared-bindings/wiznet/wiznet5k.c | 5 +- tools/extract_pyi.py | 12 +- 140 files changed, 860 insertions(+), 1762 deletions(-) delete mode 100644 docs/c2rst.py delete mode 100644 shared-bindings/help.c create mode 100644 shared-bindings/help.rst create mode 100644 shared-bindings/ulab/__init__.pyi delete mode 100644 shared-bindings/ulab/__init__.rst diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 3dda76db4..057395eee 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -34,7 +34,7 @@ jobs: run: | sudo apt-get install -y eatmydata sudo eatmydata apt-get install -y gettext librsvg2-bin mingw-w64 - pip install requests sh click setuptools cpp-coveralls "Sphinx<4" sphinx-rtd-theme recommonmark sphinxcontrib-svg2pdfconverter polib pyyaml + pip install requests sh click setuptools cpp-coveralls "Sphinx<4" sphinx-rtd-theme recommonmark sphinx-autoapi sphinxcontrib-svg2pdfconverter polib pyyaml - name: Versions run: | gcc --version diff --git a/.gitignore b/.gitignore index 435ed73a7..403fcc299 100644 --- a/.gitignore +++ b/.gitignore @@ -14,6 +14,7 @@ ############ dist/ *.egg-info +.eggs # Logs and Databases ###################### @@ -51,6 +52,7 @@ _build # Generated rst files ###################### genrst/ +autoapi/ # ctags and similar ################### diff --git a/Makefile b/Makefile index aa8fc26d1..1971076a3 100644 --- a/Makefile +++ b/Makefile @@ -69,7 +69,7 @@ clean: rm -rf $(BUILDDIR)/* rm -rf $(STUBDIR) $(DISTDIR) *.egg-info -html: +html: stubs $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html @echo @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." @@ -213,8 +213,10 @@ check-translate: locale/circuitpython.pot $(wildcard locale/*.po) $(PYTHON) tools/check_translations.py $^ stubs: + mkdir -p circuitpython-stubs python tools/extract_pyi.py shared-bindings/ $(STUBDIR) - #python setup.py sdist + python tools/extract_pyi.py ports/atmel-samd/bindings $(STUBDIR) + python setup.py sdist update-frozen-libraries: @echo "Updating all frozen libraries to latest tagged version." diff --git a/conf.py b/conf.py index 2e503737c..aea84dd21 100644 --- a/conf.py +++ b/conf.py @@ -55,7 +55,6 @@ extensions = [ 'sphinx.ext.todo', 'sphinx.ext.coverage', 'rstjinja', - 'c2rst', 'recommonmark', ] @@ -66,9 +65,17 @@ templates_path = ['templates'] source_suffix = { '.rst': 'restructuredtext', '.md': 'markdown', - '.c': '' } +extensions.append('autoapi.extension') + +autoapi_type = 'python' +# Uncomment this if debugging autoapi +# autoapi_keep_files = True +autoapi_dirs = ['circuitpython-stubs'] +autoapi_add_toctree_entry = False +autoapi_options = ['members', 'undoc-members', 'private-members', 'show-inheritance', 'special-members', 'show-module-summary'] +autoapi_template_dir = 'docs/autoapi/templates' # The encoding of source files. #source_encoding = 'utf-8-sig' @@ -78,7 +85,7 @@ source_suffix = { # General information about the project. project = 'Adafruit CircuitPython' -copyright = '2014-2018, MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)' +copyright = '2014-2020, MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)' # These are overwritten on ReadTheDocs. # The version info for the project you're documenting, acts as replacement for @@ -105,6 +112,7 @@ exclude_patterns = ["**/build*", ".git", ".venv", ".direnv", + "docs/autoapi", "docs/README.md", "drivers", "examples", diff --git a/docs/c2rst.py b/docs/c2rst.py deleted file mode 100644 index 76489dca3..000000000 --- a/docs/c2rst.py +++ /dev/null @@ -1,31 +0,0 @@ -def c2rst(app, docname, source): - """ Pre-parse '.c' & '.h' files that contain rST source. - """ - # Make sure we're outputting HTML - if app.builder.format != 'html': - return - - fname = app.env.doc2path(docname) - if (not fname.endswith(".c") and - not fname.endswith(".h")): - #print("skipping:", fname) - return - - src = source[0] - - stripped = [] - for line in src.split("\n"): - line = line.strip() - if line == "//|": - stripped.append("") - elif line.startswith("//| "): - stripped.append(line[len("//| "):]) - stripped = "\r\n".join(stripped) - - rendered = app.builder.templates.render_string( - stripped, app.config.html_context - ) - source[0] = rendered - -def setup(app): - app.connect("source-read", c2rst) diff --git a/ports/atmel-samd/README.rst b/ports/atmel-samd/README.rst index 721177275..a6881902e 100644 --- a/ports/atmel-samd/README.rst +++ b/ports/atmel-samd/README.rst @@ -21,4 +21,4 @@ Port Specific modules --------------------- .. toctree:: - bindings/samd/__init__ + ../../autoapi/samd/index diff --git a/ports/atmel-samd/bindings/samd/Clock.c b/ports/atmel-samd/bindings/samd/Clock.c index b88bb82e2..24e425e8c 100644 --- a/ports/atmel-samd/bindings/samd/Clock.c +++ b/ports/atmel-samd/bindings/samd/Clock.c @@ -30,18 +30,12 @@ #include "py/objproperty.h" #include "py/runtime.h" -//| .. currentmodule:: samd +//| import typing +//| class Clock: +//| """Identifies a clock on the microcontroller. //| -//| :class:`Clock` --- Clock reference -//| ------------------------------------------ -//| -//| Identifies a clock on the microcontroller. -//| -//| .. class:: Clock -//| -//| Identifies a clock on the microcontroller. They are fixed by the -//| hardware so they cannot be constructed on demand. Instead, use -//| `samd.clock` to reference the desired clock. +//| They are fixed by the hardware so they cannot be constructed on demand. Instead, use +//| ``samd.clock`` to reference the desired clock.""" //| STATIC void samd_clock_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) { @@ -50,9 +44,8 @@ STATIC void samd_clock_print(const mp_print_t *print, mp_obj_t self_in, mp_print mp_printf(print, "%q.%q.%q", MP_QSTR_samd, MP_QSTR_clock, self->name); } -//| .. attribute:: enabled -//| -//| Is the clock enabled? (read-only) +//| enabled: bool = ... +//| """Is the clock enabled? (read-only)""" //| STATIC mp_obj_t samd_clock_get_enabled(mp_obj_t self_in) { samd_clock_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -69,9 +62,8 @@ const mp_obj_property_t samd_clock_enabled_obj = { }, }; -//| .. attribute:: parent -//| -//| Clock parent. (read-only) +//| parent: typing.Union(Clock | None) = ... +//| """Clock parent. (read-only)""" //| STATIC mp_obj_t samd_clock_get_parent(mp_obj_t self_in) { samd_clock_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -98,9 +90,8 @@ const mp_obj_property_t samd_clock_parent_obj = { }, }; -//| .. attribute:: frequency -//| -//| Clock frequency. (read-only) +//| frequency: int = ... +//| """Clock frequency in Herz. (read-only)""" //| STATIC mp_obj_t samd_clock_get_frequency(mp_obj_t self_in) { samd_clock_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -117,9 +108,8 @@ const mp_obj_property_t samd_clock_frequency_obj = { }, }; -//| .. attribute:: calibration -//| -//| Clock calibration. Not all clocks can be calibrated. +//| calibration: int = ... +//| """Clock calibration. Not all clocks can be calibrated.""" //| STATIC mp_obj_t samd_clock_get_calibration(mp_obj_t self_in) { samd_clock_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/ports/atmel-samd/bindings/samd/__init__.c b/ports/atmel-samd/bindings/samd/__init__.c index 55a10001d..6e9b68ccc 100644 --- a/ports/atmel-samd/bindings/samd/__init__.c +++ b/ports/atmel-samd/bindings/samd/__init__.c @@ -30,29 +30,16 @@ #include "bindings/samd/Clock.h" -//| :mod:`samd` --- SAMD implementation settings -//| ================================================= -//| -//| .. module:: samd -//| :synopsis: SAMD implementation settings -//| :platform: SAMD21 -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Clock -//| +//| """SAMD implementation settings""" -//| :mod:`samd.clock` --- samd clock names +//| """:mod:`samd.clock` --- samd clock names //| -------------------------------------------------------- //| //| .. module:: samd.clock //| :synopsis: samd clock names //| :platform: SAMD21 //| -//| References to clocks as named by the microcontroller +//| References to clocks as named by the microcontroller""" //| const mp_obj_module_t samd_clock_module = { .base = { &mp_type_module }, diff --git a/setup.py b/setup.py index 1e0d81da3..37afb6f1b 100644 --- a/setup.py +++ b/setup.py @@ -5,18 +5,16 @@ from pathlib import Path stub_root = Path("circuitpython-stubs") stubs = [p.relative_to(stub_root).as_posix() for p in stub_root.glob("*.pyi")] -now = datetime.utcnow() -version = now.strftime("%Y.%m.%d") - setup( name="circuitpython-stubs", description="PEP 561 type stubs for CircuitPython", url="https://github.com/adafruit/circuitpython", maintainer="CircuitPythonistas", author_email="circuitpython@adafruit.com", - version=version, + use_scm_version=True, license="MIT", package_data={"circuitpython-stubs": stubs}, packages=["circuitpython-stubs"], - setup_requires=["setuptools>=38.6.0"], + setup_requires=["setuptools>=38.6.0", + "setuptools_scm"], ) diff --git a/shared-bindings/_bleio/Adapter.c b/shared-bindings/_bleio/Adapter.c index 6fb5c323d..4816294f7 100644 --- a/shared-bindings/_bleio/Adapter.c +++ b/shared-bindings/_bleio/Adapter.c @@ -48,10 +48,7 @@ #define WINDOW_DEFAULT (0.1f) //| class Adapter: -//| """.. currentmodule:: _bleio -//| -//| :class:`Adapter` --- BLE adapter -//| ---------------------------------------------------- +//| """BLE adapter //| //| The Adapter manages the discovery and connection to other nearby Bluetooth Low Energy devices. //| This part of the Bluetooth Low Energy Specification is known as Generic Access Profile (GAP). diff --git a/shared-bindings/_bleio/Address.c b/shared-bindings/_bleio/Address.c index 2071bd3b2..ccbab1b9d 100644 --- a/shared-bindings/_bleio/Address.c +++ b/shared-bindings/_bleio/Address.c @@ -35,12 +35,7 @@ #include "shared-module/_bleio/Address.h" //| class Address: -//| """.. currentmodule:: _bleio -//| -//| :class:`Address` -- BLE address -//| ========================================================= -//| -//| Encapsulates the address of a BLE device.""" +//| """Encapsulates the address of a BLE device.""" //| //| def __init__(self, address: buf, address_type: Any): @@ -97,7 +92,7 @@ STATIC mp_obj_t bleio_address_make_new(const mp_obj_type_t *type, size_t n_args, //| >>> _bleio.adapter.address //|
//| >>> _bleio.adapter.address.address_bytes -//| b'5\xa8\xed\xf5\x1d\xc8'""" +//| b'5\\xa8\\xed\\xf5\\x1d\\xc8'""" //| STATIC mp_obj_t bleio_address_get_address_bytes(mp_obj_t self_in) { bleio_address_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/_bleio/Attribute.c b/shared-bindings/_bleio/Attribute.c index 72fd13d1c..6c47c87ba 100644 --- a/shared-bindings/_bleio/Attribute.c +++ b/shared-bindings/_bleio/Attribute.c @@ -30,12 +30,8 @@ #include "shared-bindings/_bleio/UUID.h" //| class Attribute: -//| """.. currentmodule:: _bleio +//| """Definitions associated with all BLE attributes: characteristics, descriptors, etc. //| -//| :class:`Attribute` -- BLE Attribute -//| ========================================================= -//| -//| Definitions associated with all BLE attributes: characteristics, descriptors, etc. //| :py:class:`~_bleio.Attribute` is, notionally, a superclass of //| :py:class:`~Characteristic` and :py:class:`~Descriptor`, //| but is not defined as a Python superclass of those classes.""" diff --git a/shared-bindings/_bleio/Characteristic.c b/shared-bindings/_bleio/Characteristic.c index f8f18d0bd..785b677d6 100644 --- a/shared-bindings/_bleio/Characteristic.c +++ b/shared-bindings/_bleio/Characteristic.c @@ -34,13 +34,8 @@ #include "shared-bindings/_bleio/UUID.h" //| class Characteristic: -//| """.. currentmodule:: _bleio -//| -//| :class:`Characteristic` -- BLE service characteristic -//| ========================================================= -//| -//| Stores information about a BLE service characteristic and allows reading -//| and writing of the characteristic's value.""" +//| """Stores information about a BLE service characteristic and allows reading +//| and writing of the characteristic's value.""" //| //| def __init__(self, ): //| """There is no regular constructor for a Characteristic. A new local Characteristic can be created diff --git a/shared-bindings/_bleio/CharacteristicBuffer.c b/shared-bindings/_bleio/CharacteristicBuffer.c index f38f650d9..6cbd587c6 100644 --- a/shared-bindings/_bleio/CharacteristicBuffer.c +++ b/shared-bindings/_bleio/CharacteristicBuffer.c @@ -42,12 +42,7 @@ STATIC void raise_error_if_not_connected(bleio_characteristic_buffer_obj_t *self } //| class CharacteristicBuffer: -//| """.. currentmodule:: _bleio -//| -//| :class:`CharacteristicBuffer` -- BLE Service incoming values buffer. -//| ===================================================================== -//| -//| Accumulates a Characteristic's incoming values in a FIFO buffer.""" +//| """Accumulates a Characteristic's incoming values in a FIFO buffer.""" //| //| def __init__(self, characteristic: Characteristic, *, timeout: int = 1, buffer_size: int = 64): //| diff --git a/shared-bindings/_bleio/Connection.c b/shared-bindings/_bleio/Connection.c index 93600e76d..0a96d8a11 100644 --- a/shared-bindings/_bleio/Connection.c +++ b/shared-bindings/_bleio/Connection.c @@ -43,12 +43,7 @@ #include "shared-bindings/_bleio/Service.h" //| class Connection: -//| """.. currentmodule:: _bleio -//| -//| :class:`Connection` -- A BLE connection -//| ========================================================= -//| -//| A BLE connection to another device. Used to discover and interact with services on the other +//| """A BLE connection to another device. Used to discover and interact with services on the other //| device. //| //| Usage:: @@ -211,15 +206,14 @@ STATIC mp_obj_t bleio_connection_get_connection_interval(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(bleio_connection_get_connection_interval_obj, bleio_connection_get_connection_interval); -//| .. attribute:: max_packet_length -//| -//| The maximum number of data bytes that can be sent in a single transmission, +//| attribute: Any = ... +//| """The maximum number of data bytes that can be sent in a single transmission, //| not including overhead bytes. //| //| This is the maximum number of bytes that can be sent in a notification, //| which must be sent in a single packet. //| But for a regular characteristic read or write, may be sent in multiple packets, -//| so this limit does not apply. +//| so this limit does not apply.""" //| STATIC mp_obj_t bleio_connection_get_max_packet_length(mp_obj_t self_in) { bleio_connection_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/_bleio/Descriptor.c b/shared-bindings/_bleio/Descriptor.c index 00b3bacf5..9d7020849 100644 --- a/shared-bindings/_bleio/Descriptor.c +++ b/shared-bindings/_bleio/Descriptor.c @@ -34,12 +34,8 @@ #include "shared-bindings/_bleio/UUID.h" //| class Descriptor: -//| """.. currentmodule:: _bleio +//| """Stores information about a BLE descriptor. //| -//| :class:`Descriptor` -- BLE descriptor -//| ========================================================= -//| -//| Stores information about a BLE descriptor. //| Descriptors are attached to BLE characteristics and provide contextual //| information about the characteristic.""" //| diff --git a/shared-bindings/_bleio/PacketBuffer.c b/shared-bindings/_bleio/PacketBuffer.c index 80beadb15..907bfabd2 100644 --- a/shared-bindings/_bleio/PacketBuffer.c +++ b/shared-bindings/_bleio/PacketBuffer.c @@ -36,12 +36,7 @@ #include "shared-bindings/util.h" //| class PacketBuffer: -//| """.. currentmodule:: _bleio -//| -//| :class:`PacketBuffer` -- Packet-oriented characteristic usage. -//| ===================================================================== -//| -//| Accumulates a Characteristic's incoming packets in a FIFO buffer and facilitates packet aware +//| """Accumulates a Characteristic's incoming packets in a FIFO buffer and facilitates packet aware //| outgoing writes. A packet's size is either the characteristic length or the maximum transmission //| unit (MTU) minus overhead, whichever is smaller. The MTU can change so check `incoming_packet_length` //| and `outgoing_packet_length` before creating a buffer to store data. @@ -60,7 +55,7 @@ //| It may be a local Characteristic provided by a Peripheral Service, or a remote Characteristic //| in a remote Service that a Central has connected to. //| :param int buffer_size: Size of ring buffer (in packets of the Characteristic's maximum -//| length) that stores incoming packets coming from the peer. +//| length) that stores incoming packets coming from the peer.""" //| ... //| STATIC mp_obj_t bleio_packet_buffer_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { @@ -126,11 +121,11 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(bleio_packet_buffer_readinto_obj, bleio_packet_ //| """Writes all bytes from data into the same outgoing packet. The bytes from header are included //| before data when the pending packet is currently empty. //| -//| This does not block until the data is sent. It only blocks until the data is pending.""" -//| ... +//| This does not block until the data is sent. It only blocks until the data is pending. //| -//| :return: number of bytes written. May include header bytes when packet is empty. -//| :rtype: int +//| :return: number of bytes written. May include header bytes when packet is empty. +//| :rtype: int""" +//| ... //| // TODO: Add a kwarg `merge=False` to dictate whether subsequent writes are merged into a pending // one. @@ -174,7 +169,7 @@ STATIC mp_obj_t bleio_packet_buffer_write(mp_uint_t n_args, const mp_obj_t *pos_ } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(bleio_packet_buffer_write_obj, 1, bleio_packet_buffer_write); -//| def deinit(self, ) -> Any: +//| def deinit(self) -> Any: //| """Disable permanently.""" //| ... STATIC mp_obj_t bleio_packet_buffer_deinit(mp_obj_t self_in) { @@ -184,7 +179,7 @@ STATIC mp_obj_t bleio_packet_buffer_deinit(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(bleio_packet_buffer_deinit_obj, bleio_packet_buffer_deinit); -//| packet_size: Any = ... +//| packet_size: int = ... //| """`packet_size` is the same as `incoming_packet_length`. //| The name `packet_size` is deprecated and //| will be removed in CircuitPython 6.0.0.""" @@ -210,9 +205,8 @@ const mp_obj_property_t bleio_packet_buffer_incoming_packet_length_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| .. attribute:: outgoing_packet_length -//| -//| Maximum length in bytes of a packet we are writing. +//| outgoing_packet_length: int = ... +//| """Maximum length in bytes of a packet we are writing.""" //| STATIC mp_obj_t bleio_packet_buffer_get_outgoing_packet_length(mp_obj_t self_in) { bleio_packet_buffer_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/_bleio/ScanEntry.c b/shared-bindings/_bleio/ScanEntry.c index a92b247be..905bea81d 100644 --- a/shared-bindings/_bleio/ScanEntry.c +++ b/shared-bindings/_bleio/ScanEntry.c @@ -36,12 +36,7 @@ #include "shared-module/_bleio/ScanEntry.h" //| class ScanEntry: -//| """.. currentmodule:: _bleio -//| -//| :class:`ScanEntry` -- BLE scan data -//| ========================================================= -//| -//| Encapsulates information about a device that was received during scanning. It can be +//| """Encapsulates information about a device that was received during scanning. It can be //| advertisement or scan response data. This object may only be created by a `_bleio.ScanResults`: //| it has no user-visible constructor.""" //| @@ -68,7 +63,7 @@ STATIC mp_obj_t bleio_scanentry_matches(mp_uint_t n_args, const mp_obj_t *pos_ar mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); - + mp_buffer_info_t bufinfo; mp_get_buffer_raise(args[ARG_prefixes].u_obj, &bufinfo, MP_BUFFER_READ); return mp_obj_new_bool(common_hal_bleio_scanentry_matches(self, bufinfo.buf, bufinfo.len, args[ARG_all].u_bool)); diff --git a/shared-bindings/_bleio/ScanResults.c b/shared-bindings/_bleio/ScanResults.c index 4b274fc68..6077dcbda 100644 --- a/shared-bindings/_bleio/ScanResults.c +++ b/shared-bindings/_bleio/ScanResults.c @@ -33,12 +33,7 @@ #include "shared-bindings/_bleio/ScanResults.h" //| class ScanResults: -//| """.. currentmodule:: _bleio -//| -//| :class:`ScanResults` -- An Iterator over BLE scanning results -//| =============================================================== -//| -//| Iterates over advertising data received while scanning. This object is always created +//| """Iterates over advertising data received while scanning. This object is always created //| by a `_bleio.Adapter`: it has no user-visible constructor.""" //| STATIC mp_obj_t scanresults_iternext(mp_obj_t self_in) { diff --git a/shared-bindings/_bleio/Service.c b/shared-bindings/_bleio/Service.c index 3526ce189..5ca7504f2 100644 --- a/shared-bindings/_bleio/Service.c +++ b/shared-bindings/_bleio/Service.c @@ -33,12 +33,7 @@ #include "shared-bindings/_bleio/UUID.h" //| class Service: -//| """.. currentmodule:: _bleio -//| -//| :class:`Service` -- BLE GATT Service -//| ========================================================= -//| -//| Stores information about a BLE service and its characteristics.""" +//| """Stores information about a BLE service and its characteristics.""" //| //| def __init__(self, uuid: UUID, *, secondary: bool = False): //| """Create a new Service identified by the specified UUID. It can be accessed by all diff --git a/shared-bindings/_bleio/UUID.c b/shared-bindings/_bleio/UUID.c index d4b0f84ca..78161b956 100644 --- a/shared-bindings/_bleio/UUID.c +++ b/shared-bindings/_bleio/UUID.c @@ -34,12 +34,7 @@ #include "shared-bindings/_bleio/UUID.h" //| class UUID: -//| """.. currentmodule:: _bleio -//| -//| :class:`UUID` -- BLE UUID -//| ========================================================= -//| -//| A 16-bit or 128-bit UUID. Can be used for services, characteristics, descriptors and more.""" +//| """A 16-bit or 128-bit UUID. Can be used for services, characteristics, descriptors and more.""" //| //| def __init__(self, value: Any): //| """Create a new UUID or UUID object encapsulating the uuid value. @@ -207,7 +202,7 @@ STATIC mp_obj_t bleio_uuid_pack_into(mp_uint_t n_args, const mp_obj_t *pos_args, mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); - + mp_buffer_info_t bufinfo; mp_get_buffer_raise(args[ARG_buffer].u_obj, &bufinfo, MP_BUFFER_WRITE); diff --git a/shared-bindings/_bleio/__init__.c b/shared-bindings/_bleio/__init__.c index da7bfdd81..90b185f79 100644 --- a/shared-bindings/_bleio/__init__.c +++ b/shared-bindings/_bleio/__init__.c @@ -41,13 +41,7 @@ #include "shared-bindings/_bleio/Service.h" #include "shared-bindings/_bleio/UUID.h" -//| """:mod:`_bleio` --- Bluetooth Low Energy (BLE) communication -//| ================================================================ -//| -//| .. module:: _bleio -//| :synopsis: Bluetooth Low Energy functionality -//| :platform: nRF -//| +//| """ //| The `_bleio` module provides necessary low-level functionality for communicating //| using Bluetooth Low Energy (BLE). The '_' prefix indicates this module is meant //| for internal use by libraries but not by the end user. Its API may change incompatibly @@ -58,24 +52,6 @@ //| provides higher-level convenience functionality, including predefined beacons, clients, //| servers. //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Address -//| Adapter -//| Attribute -//| Characteristic -//| CharacteristicBuffer -//| Connection -//| Descriptor -//| PacketBuffer -//| ScanEntry -//| ScanResults -//| Service -//| UUID -//| //| .. attribute:: adapter //| //| BLE Adapter used to manage device discovery and connections. diff --git a/shared-bindings/_eve/__init__.c b/shared-bindings/_eve/__init__.c index 0e78cea16..4fa48f2c7 100644 --- a/shared-bindings/_eve/__init__.c +++ b/shared-bindings/_eve/__init__.c @@ -34,28 +34,10 @@ #include "shared-module/_eve/__init__.h" #include "shared-bindings/_eve/__init__.h" - - - - - - - - - - - - - -//| """:mod:`_eve` --- low-level BridgeTek EVE bindings -//| ================================================ -//| -//| .. module:: _eve -//| :synopsis: low-level BridgeTek EVE bindings -//| :platform: SAMD21/SAMD51 +//| """Low-level BridgeTek EVE bindings //| //| The `_eve` module provides a class _EVE which -//| contains methods for constructing EVE command +//| contains methods for constructing EVE command //| buffers and appending basic graphics commands.""" //| diff --git a/shared-bindings/_pew/PewPew.c b/shared-bindings/_pew/PewPew.c index 37188d2b7..82bf04a61 100644 --- a/shared-bindings/_pew/PewPew.c +++ b/shared-bindings/_pew/PewPew.c @@ -35,12 +35,7 @@ #include "supervisor/shared/translate.h" //| class PewPew: -//| """.. currentmodule:: _pew -//| -//| :class:`PewPew` -- LED matrix and button driver -//| =============================================== -//| -//| This is an internal module to be used by the ``pew.py`` library from +//| """This is an internal module to be used by the ``pew.py`` library from //| https://github.com/pewpew-game/pew-pewpew-standalone-10.x to handle the //| LED matrix display and buttons on the ``pewpew10`` board. //| diff --git a/shared-bindings/_pew/__init__.c b/shared-bindings/_pew/__init__.c index b6aab6726..6e0070d8e 100644 --- a/shared-bindings/_pew/__init__.c +++ b/shared-bindings/_pew/__init__.c @@ -41,17 +41,7 @@ STATIC mp_obj_t get_pressed(void) { STATIC MP_DEFINE_CONST_FUN_OBJ_0(get_pressed_obj, get_pressed); -//| """:mod:`_pew` --- LED matrix driver -//| ================================== -//| -//| .. module:: _pew -//| :synopsis: LED matrix driver -//| :platform: SAMD21 -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| PewPew""" +//| """LED matrix driver""" //| STATIC const mp_rom_map_elem_t pew_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR__pew) }, diff --git a/shared-bindings/_pixelbuf/PixelBuf.c b/shared-bindings/_pixelbuf/PixelBuf.c index 2d1f4fff2..71a91d707 100644 --- a/shared-bindings/_pixelbuf/PixelBuf.c +++ b/shared-bindings/_pixelbuf/PixelBuf.c @@ -45,12 +45,7 @@ extern const int32_t colorwheel(float pos); static void parse_byteorder(mp_obj_t byteorder_obj, pixelbuf_byteorder_details_t* parsed); //| class PixelBuf: -//| """.. currentmodule:: _pixelbuf -//| -//| :class:`PixelBuf` -- A fast RGB[W] pixel buffer for LED and similar devices -//| =========================================================================== -//| -//| :class:`~_pixelbuf.PixelBuf` implements an RGB[W] bytearray abstraction.""" +//| """A fast RGB[W] pixel buffer for LED and similar devices.""" //| //| def __init__(self, size: int, *, byteorder: str = "BGR", brightness: float = 0, auto_write: bool = False, header: bytes = b"", trailer: bytes = b""): //| """Create a PixelBuf object of the specified size, byteorder, and bits per pixel. diff --git a/shared-bindings/_pixelbuf/__init__.c b/shared-bindings/_pixelbuf/__init__.c index 30656f1c7..bfd479fde 100644 --- a/shared-bindings/_pixelbuf/__init__.c +++ b/shared-bindings/_pixelbuf/__init__.c @@ -33,35 +33,22 @@ #include "shared-bindings/_pixelbuf/PixelBuf.h" -//| """:mod:`_pixelbuf` --- Fast RGB(W) pixel buffer and helpers -//| =========================================================== - -//| .. module:: _pixelbuf -//| :synopsis: A fast RGB(W) pixel buffer library for like NeoPixel and DotStar. +//| """A fast RGB(W) pixel buffer library for like NeoPixel and DotStar. //| //| The `_pixelbuf` module provides the :py:class:`PixelBuf` class to accelerate //| RGB(W) strip/matrix manipulation, such as DotStar and Neopixel. //| -//| Byteorders are configured with strings, such as "RGB" or "RGBD". -//| TODO: Pull in docs from pypixelbuf. +//| Byteorders are configured with strings, such as "RGB" or "RGBD".""" +// TODO: Pull in docs from pypixelbuf. -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| PixelBuf""" - -//| def colorwheel(n: Any) -> Any: ... -//| - -//| def wheel(n: Any) -> Any: +//| def colorwheel(n: int) -> Any: //| """C implementation of the common wheel() function found in many examples. //| Returns the colorwheel RGB value as an integer value for n (usable in :py:class:`PixelBuf`, neopixel, and dotstar).""" //| ... //| -//| .. function:: wheel(n) -//| Use of wheel() is deprecated. Please use colorwheel(). +//| def wheel(n: Any) -> Any: +//| """Use of wheel() is deprecated. Please use colorwheel().""" +//| STATIC mp_obj_t pixelbuf_colorwheel(mp_obj_t n) { return MP_OBJ_NEW_SMALL_INT(colorwheel(MP_OBJ_IS_SMALL_INT(n) ? MP_OBJ_SMALL_INT_VALUE(n) : mp_obj_float_get(n))); diff --git a/shared-bindings/_stage/Layer.c b/shared-bindings/_stage/Layer.c index 437114cd3..0f8260e53 100644 --- a/shared-bindings/_stage/Layer.c +++ b/shared-bindings/_stage/Layer.c @@ -31,10 +31,7 @@ #include "supervisor/shared/translate.h" //| class Layer: -//| """.. currentmodule:: _stage -//| -//| :class:`Layer` -- Keep information about a single layer of graphics -//| ===================================================================""" +//| """Keep information about a single layer of graphics""" //| //| def __init__(self, width: int, height: int, graphic: bytearray, palette: bytearray, grid: bytearray): //| """Keep internal information about a layer of graphics (either a diff --git a/shared-bindings/_stage/Text.c b/shared-bindings/_stage/Text.c index 8797f74db..b0ff1525c 100644 --- a/shared-bindings/_stage/Text.c +++ b/shared-bindings/_stage/Text.c @@ -31,13 +31,10 @@ #include "supervisor/shared/translate.h" //| class Text: -//| """.. currentmodule:: _stage -//| -//| :class:`Text` -- Keep information about a single text of text -//| ==============================================================""" +//| """Keep information about a single grid of text""" //| //| def __init__(self, width: int, height: int, font: bytearray, palette: bytearray, chars: bytearray): -//| """Keep internal information about a text of text +//| """Keep internal information about a grid of text //| in a format suitable for fast rendering //| with the ``render()`` function. //| diff --git a/shared-bindings/_stage/__init__.c b/shared-bindings/_stage/__init__.c index 6b5c4fd8b..6a5638185 100644 --- a/shared-bindings/_stage/__init__.c +++ b/shared-bindings/_stage/__init__.c @@ -34,22 +34,10 @@ #include "Layer.h" #include "Text.h" -//| """:mod:`_stage` --- C-level helpers for animation of sprites on a stage -//| ===================================================================== -//| -//| .. module:: _stage -//| :synopsis: C-level helpers for animation of sprites on a stage -//| :platform: SAMD21 +//| """C-level helpers for animation of sprites on a stage //| //| The `_stage` module contains native code to speed-up the ```stage`` Library -//| `_. -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Layer -//| Text""" +//| `_.""" //| //| def render(x0: int, y0: int, x1: int, y1: int, layers: list, buffer: bytearray, display: displayio.Display, scale: int, background: int) -> Any: //| """Render and send to the display a fragment of the screen. diff --git a/shared-bindings/aesio/__init__.c b/shared-bindings/aesio/__init__.c index 43dc73e8b..fa2a2c426 100644 --- a/shared-bindings/aesio/__init__.c +++ b/shared-bindings/aesio/__init__.c @@ -31,23 +31,10 @@ #include "__init__.h" -//| :mod:`aesio` --- AES encryption routines -//| ======================================== -//| -//| .. module:: aesio -//| :synopsis: Embedded implementation of AES +//| """AES encryption routines //| //| The `AES` module contains classes used to implement encryption -//| and decryption. It aims to be low overhead in terms of memory. -//| -//| - -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| aes +//| and decryption. It aims to be low overhead in terms of memory.""" STATIC const mp_obj_tuple_t mp_aes_key_size_obj = { diff --git a/shared-bindings/aesio/aes.c b/shared-bindings/aesio/aes.c index 4ddcfa898..7a559b0bb 100644 --- a/shared-bindings/aesio/aes.c +++ b/shared-bindings/aesio/aes.c @@ -9,35 +9,31 @@ // Defined at the end of this file -//| .. currentmodule:: aesio +//| class AES: +//| """Encrypt and decrypt AES streams""" //| -//| :class:`aesio` -- Encrypt and decrypt AES streams -//| ===================================================== +//| def __init__(self, key, mode=0, iv=None, segment_size=8) -> Any: +//| """Create a new AES state with the given key. //| -//| An object that represents an AES stream, including the current state. +//| :param bytearray key: A 16-, 24-, or 32-byte key +//| :param int mode: AES mode to use. One of: AES.MODE_ECB, AES.MODE_CBC, or +//| AES.MODE_CTR +//| :param bytearray iv: Initialization vector to use for CBC or CTR mode //| -//| .. class:: AES(key, mode=0, iv=None, segment_size=8) +//| Additional arguments are supported for legacy reasons. //| -//| Create a new AES state with the given key. +//| Encrypting a string:: //| -//| :param bytearray key: A 16-, 24-, or 32-byte key -//| :param int mode: AES mode to use. One of: AES.MODE_ECB, AES.MODE_CBC, or -//| AES.MODE_CTR -//| :param bytearray iv: Initialization vector to use for CBC or CTR mode +//| import aesio +//| from binascii import hexlify //| -//| Additional arguments are supported for legacy reasons. -//| -//| Encrypting a string:: -//| -//| import aesio -//| from binascii import hexlify -//| -//| key = b'Sixteen byte key' -//| inp = b'Circuit Python!!' # Note: 16-bytes long -//| outp = bytearray(len(inp)) -//| cipher = aesio.AES(key, aesio.mode.MODE_ECB) -//| cipher.encrypt_into(inp, outp) -//| hexlify(outp) +//| key = b'Sixteen byte key' +//| inp = b'Circuit Python!!' # Note: 16-bytes long +//| outp = bytearray(len(inp)) +//| cipher = aesio.AES(key, aesio.mode.MODE_ECB) +//| cipher.encrypt_into(inp, outp) +//| hexlify(outp)""" +//| ... //| STATIC mp_obj_t aesio_aes_make_new(const mp_obj_type_t *type, size_t n_args, @@ -154,12 +150,13 @@ STATIC void validate_length(aesio_aes_obj_t *self, size_t src_length, } } -//| .. method:: encrypt_into(src, dest) +//| def encrypt_into(src, dest) -> None: +//| """Encrypt the buffer from ``src`` into ``dest``. //| -//| Encrypt the buffer from ``src`` into ``dest``. -//| For ECB mode, the buffers must be 16 bytes long. For CBC mode, the -//| buffers must be a multiple of 16 bytes, and must be equal length. For -//| CTX mode, there are no restrictions. +//| For ECB mode, the buffers must be 16 bytes long. For CBC mode, the +//| buffers must be a multiple of 16 bytes, and must be equal length. For +//| CTX mode, there are no restrictions.""" +//| ... //| STATIC mp_obj_t aesio_aes_encrypt_into(mp_obj_t aesio_obj, mp_obj_t src, mp_obj_t dest) { @@ -184,12 +181,13 @@ STATIC mp_obj_t aesio_aes_encrypt_into(mp_obj_t aesio_obj, mp_obj_t src, STATIC MP_DEFINE_CONST_FUN_OBJ_3(aesio_aes_encrypt_into_obj, aesio_aes_encrypt_into); -//| .. method:: decrypt_into(src, dest) +//| def decrypt_into(src, dest) -> None: //| -//| Decrypt the buffer from ``src`` into ``dest``. -//| For ECB mode, the buffers must be 16 bytes long. For CBC mode, the -//| buffers must be a multiple of 16 bytes, and must be equal length. For -//| CTX mode, there are no restrictions. +//| """Decrypt the buffer from ``src`` into ``dest``. +//| For ECB mode, the buffers must be 16 bytes long. For CBC mode, the +//| buffers must be a multiple of 16 bytes, and must be equal length. For +//| CTX mode, there are no restrictions.""" +//| ... //| STATIC mp_obj_t aesio_aes_decrypt_into(mp_obj_t aesio_obj, mp_obj_t src, mp_obj_t dest) { diff --git a/shared-bindings/analogio/AnalogIn.c b/shared-bindings/analogio/AnalogIn.c index 2fb5051eb..bafa287ff 100644 --- a/shared-bindings/analogio/AnalogIn.c +++ b/shared-bindings/analogio/AnalogIn.c @@ -37,10 +37,7 @@ #include "shared-bindings/util.h" //| class AnalogIn: -//| """.. currentmodule:: analogio -//| -//| :class:`AnalogIn` -- read analog voltage -//| ============================================ +//| """Read analog voltage levels //| //| Usage:: //| diff --git a/shared-bindings/analogio/AnalogOut.c b/shared-bindings/analogio/AnalogOut.c index 9064bb5dc..a8edcc0ae 100644 --- a/shared-bindings/analogio/AnalogOut.c +++ b/shared-bindings/analogio/AnalogOut.c @@ -37,12 +37,7 @@ #include "supervisor/shared/translate.h" //| class AnalogOut: -//| """.. currentmodule:: analogio -//| -//| :class:`AnalogOut` -- output analog voltage -//| ============================================ -//| -//| The AnalogOut is used to output analog values (a specific voltage). +//| """Output analog values (a specific voltage). //| //| Example usage:: //| diff --git a/shared-bindings/analogio/__init__.c b/shared-bindings/analogio/__init__.c index 79627f16a..1f059f340 100644 --- a/shared-bindings/analogio/__init__.c +++ b/shared-bindings/analogio/__init__.c @@ -34,25 +34,12 @@ #include "shared-bindings/analogio/AnalogIn.h" #include "shared-bindings/analogio/AnalogOut.h" -//| """:mod:`analogio` --- Analog hardware support -//| ================================================= -//| -//| .. module:: analogio -//| :synopsis: Analog hardware support -//| :platform: SAMD21, ESP8266 +//| """Analog hardware support //| //| The `analogio` module contains classes to provide access to analog IO //| typically implemented with digital-to-analog (DAC) and analog-to-digital //| (ADC) converters. //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| AnalogIn -//| AnalogOut -//| //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either //| call :py:meth:`!deinit` or use a context manager. See diff --git a/shared-bindings/audiobusio/I2SOut.c b/shared-bindings/audiobusio/I2SOut.c index 724a65a34..d965aac89 100644 --- a/shared-bindings/audiobusio/I2SOut.c +++ b/shared-bindings/audiobusio/I2SOut.c @@ -36,12 +36,7 @@ #include "supervisor/shared/translate.h" //| class I2SOut: -//| """.. currentmodule:: audiobusio -//| -//| :class:`I2SOut` -- Output an I2S audio signal -//| ======================================================== -//| -//| I2S is used to output an audio signal on an I2S bus.""" +//| """Output an I2S audio signal""" //| //| def __init__(self, bit_clock: microcontroller.Pin, word_select: microcontroller.Pin, data: microcontroller.Pin, *, left_justified: bool): //| """Create a I2SOut object associated with the given pins. diff --git a/shared-bindings/audiobusio/PDMIn.c b/shared-bindings/audiobusio/PDMIn.c index 6cc834724..5b950297b 100644 --- a/shared-bindings/audiobusio/PDMIn.c +++ b/shared-bindings/audiobusio/PDMIn.c @@ -37,12 +37,7 @@ #include "supervisor/shared/translate.h" //| class PDMIn: -//| """.. currentmodule:: audiobusio -//| -//| :class:`PDMIn` -- Record an input PDM audio stream -//| ======================================================== -//| -//| PDMIn can be used to record an input audio signal on a given set of pins.""" +//| """Record an input PDM audio stream""" //| //| def __init__(self, clock_pin: microcontroller.Pin, data_pin: microcontroller.Pin, *, sample_rate: int = 16000, bit_depth: int = 8, mono: bool = True, oversample: int = 64, startup_delay: float = 0.11): //| """Create a PDMIn object associated with the given pins. This allows you to diff --git a/shared-bindings/audiobusio/__init__.c b/shared-bindings/audiobusio/__init__.c index c5c387361..89ccbb88b 100644 --- a/shared-bindings/audiobusio/__init__.c +++ b/shared-bindings/audiobusio/__init__.c @@ -34,26 +34,13 @@ #include "shared-bindings/audiobusio/I2SOut.h" #include "shared-bindings/audiobusio/PDMIn.h" -//| """:mod:`audiobusio` --- Support for audio input and output over digital bus -//| ========================================================================= -//| -//| .. module:: audiobusio -//| :synopsis: Support for audio input and output over digital bus -//| :platform: SAMD21 +//| """Support for audio input and output over digital buses //| //| The `audiobusio` module contains classes to provide access to audio IO //| over digital buses. These protocols are used to communicate audio to other //| chips in the same circuit. It doesn't include audio interconnect protocols //| such as S/PDIF. //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| I2SOut -//| PDMIn -//| //| All libraries change hardware state and should be deinitialized when they //| are no longer needed. To do so, either call :py:meth:`!deinit` or use a //| context manager.""" diff --git a/shared-bindings/audiocore/RawSample.c b/shared-bindings/audiocore/RawSample.c index 6091fbfc0..c0f9325e6 100644 --- a/shared-bindings/audiocore/RawSample.c +++ b/shared-bindings/audiocore/RawSample.c @@ -35,19 +35,8 @@ #include "shared-bindings/audiocore/RawSample.h" #include "supervisor/shared/translate.h" - - - - - - //| class RawSample: -//| """.. currentmodule:: audiocore -//| -//| :class:`RawSample` -- A raw audio sample buffer -//| ======================================================== -//| -//| An in-memory sound sample""" +//| """A raw audio sample buffer in memory""" //| //| def __init__(self, buffer: array.array, *, channel_count: int = 1, sample_rate: int = 8000): //| """Create a RawSample based on the given buffer of signed values. If channel_count is more than diff --git a/shared-bindings/audiocore/WaveFile.c b/shared-bindings/audiocore/WaveFile.c index 65b42fb6c..a067f6cda 100644 --- a/shared-bindings/audiocore/WaveFile.c +++ b/shared-bindings/audiocore/WaveFile.c @@ -34,10 +34,7 @@ #include "supervisor/shared/translate.h" //| class WaveFile: -//| """.. currentmodule:: audiocore -//| -//| :class:`WaveFile` -- Load a wave file for audio playback -//| ======================================================== +//| """Load a wave file for audio playback //| //| A .wav file prepped for audio playback. Only mono and stereo files are supported. Samples must //| be 8 bit unsigned or 16 bit signed. If a buffer is provided, it will be used instead of allocating diff --git a/shared-bindings/audiocore/__init__.c b/shared-bindings/audiocore/__init__.c index 38f91d8ee..b400b9454 100644 --- a/shared-bindings/audiocore/__init__.c +++ b/shared-bindings/audiocore/__init__.c @@ -35,22 +35,7 @@ #include "shared-bindings/audiocore/WaveFile.h" //#include "shared-bindings/audiomixer/Mixer.h" -//| """:mod:`audiocore` --- Support for audio samples and mixer -//| ======================================================== -//| -//| .. module:: audiocore -//| :synopsis: Support for audio samples and mixer -//| :platform: SAMD21 -//| -//| The `audiocore` module contains core classes for audio IO -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| RawSample -//| WaveFile""" +//| """Support for audio samples""" //| STATIC const mp_rom_map_elem_t audiocore_module_globals_table[] = { diff --git a/shared-bindings/audioio/AudioOut.c b/shared-bindings/audioio/AudioOut.c index 84e5e4422..574868202 100644 --- a/shared-bindings/audioio/AudioOut.c +++ b/shared-bindings/audioio/AudioOut.c @@ -37,12 +37,7 @@ #include "supervisor/shared/translate.h" //| class AudioOut: -//| """.. currentmodule:: audioio -//| -//| :class:`AudioOut` -- Output an analog audio signal -//| ======================================================== -//| -//| AudioOut can be used to output an analog audio signal on a given pin.""" +//| """Output an analog audio signal""" //| //| def __init__(self, left_channel: microcontroller.Pin, *, right_channel: microcontroller.Pin = None, quiescent_value: int = 0x8000): //| """Create a AudioOut object associated with the given pin(s). This allows you to diff --git a/shared-bindings/audioio/__init__.c b/shared-bindings/audioio/__init__.c index bc2e26cfc..7ec927834 100644 --- a/shared-bindings/audioio/__init__.c +++ b/shared-bindings/audioio/__init__.c @@ -42,22 +42,10 @@ #include "shared-bindings/audiomixer/Mixer.h" #endif -//| """:mod:`audioio` --- Support for audio input and output -//| ====================================================== -//| -//| .. module:: audioio -//| :synopsis: Support for audio input and output -//| :platform: SAMD21 +//| """Support for audio output //| //| The `audioio` module contains classes to provide access to audio IO. //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| AudioOut -//| //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either //| call :py:meth:`!deinit` or use a context manager. See diff --git a/shared-bindings/audiomixer/Mixer.c b/shared-bindings/audiomixer/Mixer.c index 966581d45..31e62cdae 100644 --- a/shared-bindings/audiomixer/Mixer.c +++ b/shared-bindings/audiomixer/Mixer.c @@ -39,12 +39,7 @@ #include "supervisor/shared/translate.h" //| class Mixer: -//| """.. currentmodule:: audiomixer -//| -//| :class:`Mixer` -- Mixes one or more audio samples together -//| =========================================================== -//| -//| Mixer mixes multiple samples into one sample.""" +//| """Mixes one or more audio samples together into one sample.""" //| //| def __init__(self, voice_count: int = 2, buffer_size: int = 1024, channel_count: int = 2, bits_per_sample: int = 16, samples_signed: bool = True, sample_rate: int = 8000): //| """Create a Mixer object that can mix multiple channels with the same sample rate. diff --git a/shared-bindings/audiomixer/MixerVoice.c b/shared-bindings/audiomixer/MixerVoice.c index 257d9507b..ec5768d2f 100644 --- a/shared-bindings/audiomixer/MixerVoice.c +++ b/shared-bindings/audiomixer/MixerVoice.c @@ -38,10 +38,7 @@ #include "supervisor/shared/translate.h" //| class MixerVoice: -//| """.. currentmodule:: audiomixer -//| -//| :class:`MixerVoice` -- Voice objects used with Mixer -//| ===================================================== +//| """Voice objects used with Mixer //| //| Used to access and control samples with `audiomixer.Mixer`.""" //| diff --git a/shared-bindings/audiomixer/__init__.c b/shared-bindings/audiomixer/__init__.c index c90a4a0e6..1146bb798 100644 --- a/shared-bindings/audiomixer/__init__.c +++ b/shared-bindings/audiomixer/__init__.c @@ -32,21 +32,7 @@ #include "shared-bindings/microcontroller/Pin.h" #include "shared-bindings/audiomixer/Mixer.h" -//| """:mod:`audiomixer` --- Support for audio mixer -//| ======================================================== -//| -//| .. module:: audiomixer -//| :synopsis: Support for audio mixer -//| -//| The `audiomixer` module contains core classes for mixing audio sources -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Mixer -//| MixerVoice""" +//| """Support for audio mixing""" //| STATIC const mp_rom_map_elem_t audiomixer_module_globals_table[] = { diff --git a/shared-bindings/audiomp3/MP3Decoder.c b/shared-bindings/audiomp3/MP3Decoder.c index d9c85bbf6..e6d48e32c 100644 --- a/shared-bindings/audiomp3/MP3Decoder.c +++ b/shared-bindings/audiomp3/MP3Decoder.c @@ -35,12 +35,7 @@ #include "supervisor/shared/translate.h" //| class MP3: -//| """.. currentmodule:: audiomp3 -//| -//| :class:`MP3Decoder` -- Load a mp3 file for audio playback -//| ========================================================= -//| -//| An object that decodes MP3 files for playback on an audio device.""" +//| """Load a mp3 file for audio playback""" //| //| def __init__(self, file: typing.BinaryIO, buffer: bytearray): //| diff --git a/shared-bindings/audiomp3/__init__.c b/shared-bindings/audiomp3/__init__.c index 50b29da52..62e5f56cb 100644 --- a/shared-bindings/audiomp3/__init__.c +++ b/shared-bindings/audiomp3/__init__.c @@ -31,20 +31,7 @@ #include "shared-bindings/audiomp3/MP3Decoder.h" -//| """:mod:`audiomp3` --- Support for MP3-compressed audio files -//| ========================================================== -//| -//| .. module:: audiomp3 -//| :synopsis: Support for mp3 files -//| -//| The `audiomp3` module contains an mp3 decoder -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| MP3Decoder""" +//| """Support for MP3-compressed audio files""" //| STATIC const mp_rom_map_elem_t audiomp3_module_globals_table[] = { diff --git a/shared-bindings/audiopwmio/PWMAudioOut.c b/shared-bindings/audiopwmio/PWMAudioOut.c index 17f82e3f6..d6b102317 100644 --- a/shared-bindings/audiopwmio/PWMAudioOut.c +++ b/shared-bindings/audiopwmio/PWMAudioOut.c @@ -37,12 +37,7 @@ #include "supervisor/shared/translate.h" //| class PWMAudioOut: -//| """.. currentmodule:: audiopwmio -//| -//| :class:`PWMAudioOut` -- Output an analog audio signal -//| ======================================================== -//| -//| AudioOut can be used to output an analog audio signal on a given pin.""" +//| """Output an analog audio signal by varying the PWM duty cycle.""" //| //| def __init__(self, left_channel: microcontroller.Pin, *, right_channel: microcontroller.Pin = None, quiescent_value: int = 0x8000): //| """Create a PWMAudioOut object associated with the given pin(s). This allows you to diff --git a/shared-bindings/audiopwmio/__init__.c b/shared-bindings/audiopwmio/__init__.c index 74d22b45e..5caea1420 100644 --- a/shared-bindings/audiopwmio/__init__.c +++ b/shared-bindings/audiopwmio/__init__.c @@ -33,22 +33,10 @@ #include "shared-bindings/audiopwmio/__init__.h" #include "shared-bindings/audiopwmio/PWMAudioOut.h" -//| """:mod:`audiopwmio` --- Support for audio input and output -//| ======================================================== -//| -//| .. module:: audiopwmio -//| :synopsis: Support for audio output via digital PWM -//| :platform: NRF52 +//| """Audio output via digital PWM //| //| The `audiopwmio` module contains classes to provide access to audio IO. //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| PWMAudioOut -//| //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either //| call :py:meth:`!deinit` or use a context manager. See diff --git a/shared-bindings/bitbangio/I2C.c b/shared-bindings/bitbangio/I2C.c index a682e050e..2043fc903 100644 --- a/shared-bindings/bitbangio/I2C.c +++ b/shared-bindings/bitbangio/I2C.c @@ -38,10 +38,7 @@ #include "supervisor/shared/translate.h" //| class I2C: -//| """.. currentmodule:: bitbangio -//| -//| :class:`I2C` --- Two wire serial protocol -//| ------------------------------------------""" +//| """Two wire serial protocol""" //| //| def __init__(self, scl: microcontroller.Pin, sda: microcontroller.Pin, *, frequency: int = 400000, timeout: int): //| """I2C is a two-wire protocol for communicating between devices. At the diff --git a/shared-bindings/bitbangio/OneWire.c b/shared-bindings/bitbangio/OneWire.c index 1c9405bd8..a236f4c2a 100644 --- a/shared-bindings/bitbangio/OneWire.c +++ b/shared-bindings/bitbangio/OneWire.c @@ -35,10 +35,7 @@ #include "shared-bindings/util.h" //| class OneWire: -//| """.. currentmodule:: bitbangio -//| -//| :class:`OneWire` -- Lowest-level of the Maxim OneWire protocol -//| =============================================================== +//| """Lowest-level of the Maxim OneWire protocol //| //| :class:`~bitbangio.OneWire` implements the timing-sensitive foundation of //| the Maxim (formerly Dallas Semi) OneWire protocol. diff --git a/shared-bindings/bitbangio/SPI.c b/shared-bindings/bitbangio/SPI.c index 38e0926e8..08bbf1257 100644 --- a/shared-bindings/bitbangio/SPI.c +++ b/shared-bindings/bitbangio/SPI.c @@ -40,10 +40,7 @@ #include "supervisor/shared/translate.h" //| class SPI: -//| """.. currentmodule:: bitbangio -//| -//| :class:`SPI` -- a 3-4 wire serial protocol -//| ----------------------------------------------- +//| """A 3-4 wire serial protocol //| //| SPI is a serial protocol that has exclusive pins for data in and out of the //| master. It is typically faster than :py:class:`~bitbangio.I2C` because a diff --git a/shared-bindings/bitbangio/__init__.c b/shared-bindings/bitbangio/__init__.c index e9600a7e6..e04bdf701 100644 --- a/shared-bindings/bitbangio/__init__.c +++ b/shared-bindings/bitbangio/__init__.c @@ -40,12 +40,7 @@ #include "py/runtime.h" -//| """:mod:`bitbangio` --- Digital protocols implemented by the CPU -//| ============================================================= -//| -//| .. module:: bitbangio -//| :synopsis: Digital protocols implemented by the CPU -//| :platform: SAMD21, ESP8266 +//| """Digital protocols implemented by the CPU //| //| The `bitbangio` module contains classes to provide digital bus protocol //| support regardless of whether the underlying hardware exists to use the @@ -55,15 +50,6 @@ //| hardware to implement the protocols. Native implementations will be faster //| than bitbanged versions and have more capabilities. //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| I2C -//| OneWire -//| SPI -//| //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either //| call :py:meth:`!deinit` or use a context manager. See diff --git a/shared-bindings/board/__init__.c b/shared-bindings/board/__init__.c index 77675e093..010a9fb92 100644 --- a/shared-bindings/board/__init__.c +++ b/shared-bindings/board/__init__.c @@ -29,11 +29,7 @@ #include "shared-bindings/board/__init__.h" -//| """:mod:`board` --- Board specific pin names -//| ======================================================== -//| -//| .. module:: board -//| :synopsis: Board specific pin names +//| """Board specific pin names //| //| Common container for board base pin names. These will vary from board to //| board so don't expect portability when using this module. diff --git a/shared-bindings/busio/I2C.c b/shared-bindings/busio/I2C.c index 8ae3658ee..7e8af765f 100644 --- a/shared-bindings/busio/I2C.c +++ b/shared-bindings/busio/I2C.c @@ -37,10 +37,7 @@ #include "supervisor/shared/translate.h" //| class I2C: -//| """.. currentmodule:: busio -//| -//| :class:`I2C` --- Two wire serial protocol -//| ------------------------------------------""" +//| """Two wire serial protocol""" //| //| def __init__(self, scl: microcontroller.Pin, sda: microcontroller.Pin, *, frequency: int = 400000, timeout: int = 255): //| diff --git a/shared-bindings/busio/OneWire.c b/shared-bindings/busio/OneWire.c index 556e567ef..723cc031a 100644 --- a/shared-bindings/busio/OneWire.c +++ b/shared-bindings/busio/OneWire.c @@ -35,10 +35,7 @@ #include "shared-bindings/util.h" //| class OneWire: -//| """.. currentmodule:: busio -//| -//| :class:`OneWire` -- Lowest-level of the Maxim OneWire protocol -//| =================================================================""" +//| """Lowest-level of the Maxim OneWire protocol""" //| //| def __init__(self, pin: microcontroller.Pin): //| """(formerly Dallas Semi) OneWire protocol. diff --git a/shared-bindings/busio/SPI.c b/shared-bindings/busio/SPI.c index 5b1881702..2ba9a4c22 100644 --- a/shared-bindings/busio/SPI.c +++ b/shared-bindings/busio/SPI.c @@ -42,10 +42,7 @@ //| class SPI: -//| """.. currentmodule:: busio -//| -//| `SPI` -- a 3-4 wire serial protocol -//| ----------------------------------------------- +//| """A 3-4 wire serial protocol //| //| SPI is a serial protocol that has exclusive pins for data in and out of the //| master. It is typically faster than :py:class:`~busio.I2C` because a @@ -147,7 +144,7 @@ STATIC void check_for_deinit(busio_spi_obj_t *self) { //| def configure(self, *, baudrate: int = 100000, polarity: int = 0, phase: int = 0, bits: int = 8) -> Any: //| """Configures the SPI bus. The SPI object must be locked. //| -//| :param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower +//| :param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower //| due to the granularity of available clock settings. //| Check the `frequency` attribute for the actual clock rate. //| :param int polarity: the base state of the clock line (0 or 1) diff --git a/shared-bindings/busio/UART.c b/shared-bindings/busio/UART.c index 5984194a9..d4642225c 100644 --- a/shared-bindings/busio/UART.c +++ b/shared-bindings/busio/UART.c @@ -43,10 +43,7 @@ // #define STREAM_DEBUG(...) mp_printf(&mp_plat_print __VA_OPT__(,) __VA_ARGS__) //| class UART: -//| """.. currentmodule:: busio -//| -//| :class:`UART` -- a bidirectional serial protocol -//| =================================================""" +//| """A bidirectional serial protocol""" //| def __init__(self, tx: microcontroller.Pin, rx: microcontroller.Pin, *, baudrate: int = 9600, bits: int = 8, parity: Parity = None, stop: int = 1, timeout: float = 1, receiver_buffer_size: int = 64): //| """A common bidirectional serial protocol that uses an an agreed upon speed //| rather than a shared clock line. diff --git a/shared-bindings/busio/__init__.c b/shared-bindings/busio/__init__.c index 212b3218c..04632c2f4 100644 --- a/shared-bindings/busio/__init__.c +++ b/shared-bindings/busio/__init__.c @@ -38,12 +38,7 @@ #include "py/runtime.h" -//| """:mod:`busio` --- Hardware accelerated behavior -//| ================================================= -//| -//| .. module:: busio -//| :synopsis: Hardware accelerated behavior -//| :platform: SAMD21 +//| """Hardware accelerated external bus access //| //| The `busio` module contains classes to support a variety of serial //| protocols. @@ -54,16 +49,6 @@ //| then a RuntimeError will be raised. Use the `bitbangio` module to explicitly //| bitbang a serial protocol on any general purpose pins. //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| I2C -//| OneWire -//| SPI -//| UART -//| //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either //| call :py:meth:`!deinit` or use a context manager. See diff --git a/shared-bindings/digitalio/DigitalInOut.c b/shared-bindings/digitalio/DigitalInOut.c index 5fffb3f65..54ced099d 100644 --- a/shared-bindings/digitalio/DigitalInOut.c +++ b/shared-bindings/digitalio/DigitalInOut.c @@ -44,10 +44,7 @@ #include "supervisor/shared/translate.h" //| class DigitalInOut: -//| """.. currentmodule:: digitalio -//| -//| :class:`DigitalInOut` -- digital input and output -//| ========================================================= +//| """Digital input and output //| //| A DigitalInOut is used to digitally control I/O pins. For analog control of //| a pin, see the :py:class:`analogio.AnalogIn` and diff --git a/shared-bindings/digitalio/Direction.c b/shared-bindings/digitalio/Direction.c index 0586e95de..dbd0e93e4 100644 --- a/shared-bindings/digitalio/Direction.c +++ b/shared-bindings/digitalio/Direction.c @@ -39,10 +39,7 @@ #include "shared-bindings/digitalio/DigitalInOut.h" //| class Direction: -//| """.. currentmodule:: digitalio -//| -//| :class:`Direction` -- defines the direction of a digital pin -//| =============================================================""" +//| """Defines the direction of a digital pin""" //| //| def __init__(self, ): //| """Enum-like class to define which direction the digital values are diff --git a/shared-bindings/digitalio/DriveMode.c b/shared-bindings/digitalio/DriveMode.c index 23745b046..31b682d38 100644 --- a/shared-bindings/digitalio/DriveMode.c +++ b/shared-bindings/digitalio/DriveMode.c @@ -27,10 +27,7 @@ #include "shared-bindings/digitalio/DriveMode.h" //| class DriveMode: -//| """.. currentmodule:: digitalio -//| -//| :class:`DriveMode` -- defines the drive mode of a digital pin -//| =============================================================""" +//| """Defines the drive mode of a digital pin""" //| //| def __init__(self, ): //| """Enum-like class to define the drive mode used when outputting diff --git a/shared-bindings/digitalio/Pull.c b/shared-bindings/digitalio/Pull.c index 1e64d0788..9aeec1f33 100644 --- a/shared-bindings/digitalio/Pull.c +++ b/shared-bindings/digitalio/Pull.c @@ -27,10 +27,7 @@ #include "shared-bindings/digitalio/Pull.h" //| class Pull: -//| """.. currentmodule:: digitalio -//| -//| :class:`Pull` -- defines the pull of a digital input pin -//| =============================================================""" +//| """Defines the pull of a digital input pin""" //| //| def __init__(self, ): //| """Enum-like class to define the pull value, if any, used while reading diff --git a/shared-bindings/digitalio/__init__.c b/shared-bindings/digitalio/__init__.c index 5a11436a2..f8f45b158 100644 --- a/shared-bindings/digitalio/__init__.c +++ b/shared-bindings/digitalio/__init__.c @@ -38,25 +38,10 @@ #include "py/runtime.h" -//| """:mod:`digitalio` --- Basic digital pin support -//| ================================================= -//| -//| .. module:: digitalio -//| :synopsis: Basic digital pin support -//| :platform: SAMD21, ESP8266 +//| """Basic digital pin support //| //| The `digitalio` module contains classes to provide access to basic digital IO. //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| DigitalInOut -//| Direction -//| DriveMode -//| Pull -//| //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either //| call :py:meth:`!deinit` or use a context manager. See diff --git a/shared-bindings/displayio/Bitmap.c b/shared-bindings/displayio/Bitmap.c index d15c3b107..a52840f2e 100644 --- a/shared-bindings/displayio/Bitmap.c +++ b/shared-bindings/displayio/Bitmap.c @@ -37,12 +37,7 @@ #include "supervisor/shared/translate.h" //| class Bitmap: -//| """.. currentmodule:: displayio -//| -//| :class:`Bitmap` -- Stores values in a 2D array -//| ========================================================================== -//| -//| Stores values of a certain size in a 2D array""" +//| """Stores values of a certain size in a 2D array""" //| //| def __init__(self, width: int, height: int, value_count: int): //| """Create a Bitmap object with the given fixed size. Each pixel stores a value that is used to diff --git a/shared-bindings/displayio/ColorConverter.c b/shared-bindings/displayio/ColorConverter.c index 1d6e5a0cc..505e9f766 100644 --- a/shared-bindings/displayio/ColorConverter.c +++ b/shared-bindings/displayio/ColorConverter.c @@ -37,12 +37,7 @@ #include "supervisor/shared/translate.h" //| class ColorConverter: -//| """.. currentmodule:: displayio -//| -//| :class:`ColorConverter` -- Converts one color format to another -//| ========================================================================================= -//| -//| Converts one color format to another.""" +//| """Converts one color format to another.""" //| //| def __init__(self, *, dither: bool = False): //| """Create a ColorConverter object to convert color formats. Only supports RGB888 to RGB565 diff --git a/shared-bindings/displayio/Display.c b/shared-bindings/displayio/Display.c index 12abec1c8..62ef0f5d0 100644 --- a/shared-bindings/displayio/Display.c +++ b/shared-bindings/displayio/Display.c @@ -40,10 +40,7 @@ #include "supervisor/shared/translate.h" //| class Display: -//| """.. currentmodule:: displayio -//| -//| :class:`Display` -- Manage updating a display over a display bus -//| ========================================================================== +//| """Manage updating a display over a display bus //| //| This initializes a display and connects it into CircuitPython. Unlike other //| objects in CircuitPython, Display objects live until `displayio.release_displays()` diff --git a/shared-bindings/displayio/EPaperDisplay.c b/shared-bindings/displayio/EPaperDisplay.c index 8b03ddc06..8b77e4df3 100644 --- a/shared-bindings/displayio/EPaperDisplay.c +++ b/shared-bindings/displayio/EPaperDisplay.c @@ -40,10 +40,7 @@ #include "supervisor/shared/translate.h" //| class EPaperDisplay: -//| """.. currentmodule:: displayio -//| -//| :class:`EPaperDisplay` -- Manage updating an epaper display over a display bus -//| ============================================================================== +//| """Manage updating an epaper display over a display bus //| //| This initializes an epaper display and connects it into CircuitPython. Unlike other //| objects in CircuitPython, EPaperDisplay objects live until `displayio.release_displays()` diff --git a/shared-bindings/displayio/FourWire.c b/shared-bindings/displayio/FourWire.c index 649045039..5ee4ec5a9 100644 --- a/shared-bindings/displayio/FourWire.c +++ b/shared-bindings/displayio/FourWire.c @@ -39,12 +39,7 @@ #include "supervisor/shared/translate.h" //| class FourWire: -//| """.. currentmodule:: displayio -//| -//| :class:`FourWire` -- Manage updating a display over SPI four wire protocol -//| ========================================================================== -//| -//| Manage updating a display over SPI four wire protocol in the background while Python code runs. +//| """Manage updating a display over SPI four wire protocol in the background while Python code runs. //| It doesn't handle display initialization.""" //| //| def __init__(self, spi_bus: busio.SPI, *, command: microcontroller.Pin, chip_select: microcontroller.Pin, reset: microcontroller.Pin = None, baudrate: int = 24000000, polarity: int = 0, phase: int = 0): diff --git a/shared-bindings/displayio/Group.c b/shared-bindings/displayio/Group.c index 36e137dc9..b6f96883b 100644 --- a/shared-bindings/displayio/Group.c +++ b/shared-bindings/displayio/Group.c @@ -36,12 +36,7 @@ #include "supervisor/shared/translate.h" //| class Group: -//| """.. currentmodule:: displayio -//| -//| :class:`Group` -- Group together sprites and subgroups -//| ========================================================================== -//| -//| Manage a group of sprites and groups and how they are inter-related.""" +//| """Manage a group of sprites and groups and how they are inter-related.""" //| //| def __init__(self, *, max_size: int = 4, scale: int = 1, x: int = 0, y: int = 0): //| """Create a Group of a given size and scale. Scale is in one dimension. For example, scale=2 diff --git a/shared-bindings/displayio/I2CDisplay.c b/shared-bindings/displayio/I2CDisplay.c index e2402dc49..0cfac6672 100644 --- a/shared-bindings/displayio/I2CDisplay.c +++ b/shared-bindings/displayio/I2CDisplay.c @@ -39,12 +39,7 @@ #include "supervisor/shared/translate.h" //| class I2CDisplay: -//| """.. currentmodule:: displayio -//| -//| :class:`I2CDisplay` -- Manage updating a display over I2C -//| ========================================================================== -//| -//| Manage updating a display over I2C in the background while Python code runs. +//| """Manage updating a display over I2C in the background while Python code runs. //| It doesn't handle display initialization.""" //| //| def __init__(self, i2c_bus: busio.I2C, *, device_address: int, reset: microcontroller.Pin = None): diff --git a/shared-bindings/displayio/OnDiskBitmap.c b/shared-bindings/displayio/OnDiskBitmap.c index 95c890c3b..170873653 100644 --- a/shared-bindings/displayio/OnDiskBitmap.c +++ b/shared-bindings/displayio/OnDiskBitmap.c @@ -34,12 +34,7 @@ #include "shared-bindings/displayio/OnDiskBitmap.h" //| class OnDiskBitmap: -//| """.. currentmodule:: displayio -//| -//| :class:`OnDiskBitmap` -- Loads pixels straight from disk -//| ========================================================================== -//| -//| Loads values straight from disk. This minimizes memory use but can lead to +//| """Loads values straight from disk. This minimizes memory use but can lead to //| much slower pixel load times. These load times may result in frame tearing where only part of //| the image is visible. //| diff --git a/shared-bindings/displayio/Palette.c b/shared-bindings/displayio/Palette.c index 5df11d2b1..871b2b06a 100644 --- a/shared-bindings/displayio/Palette.c +++ b/shared-bindings/displayio/Palette.c @@ -43,12 +43,7 @@ //| class Palette: -//| """.. currentmodule:: displayio -//| -//| :class:`Palette` -- Stores a mapping from bitmap pixel palette_indexes to display colors -//| ========================================================================================= -//| -//| Map a pixel palette_index to a full color. Colors are transformed to the display's format internally to +//| """Map a pixel palette_index to a full color. Colors are transformed to the display's format internally to //| save memory.""" //| //| def __init__(self, color_count: int): diff --git a/shared-bindings/displayio/ParallelBus.c b/shared-bindings/displayio/ParallelBus.c index cedcf1de5..eb75ecc03 100644 --- a/shared-bindings/displayio/ParallelBus.c +++ b/shared-bindings/displayio/ParallelBus.c @@ -38,12 +38,7 @@ #include "supervisor/shared/translate.h" //| class ParallelBus: -//| """.. currentmodule:: displayio -//| -//| :class:`ParallelBus` -- Manage updating a display over 8-bit parallel bus -//| ============================================================================== -//| -//| Manage updating a display over 8-bit parallel bus in the background while Python code runs. This +//| """Manage updating a display over 8-bit parallel bus in the background while Python code runs. This //| protocol may be refered to as 8080-I Series Parallel Interface in datasheets. It doesn't handle //| display initialization.""" //| diff --git a/shared-bindings/displayio/Shape.c b/shared-bindings/displayio/Shape.c index 0f22bb2a3..fce89c771 100644 --- a/shared-bindings/displayio/Shape.c +++ b/shared-bindings/displayio/Shape.c @@ -35,12 +35,7 @@ #include "supervisor/shared/translate.h" //| class Shape: -//| """.. currentmodule:: displayio -//| -//| :class:`Shape` -- Represents a shape by defining its bounds on each row -//| ========================================================================== -//| -//| Represents any shape made by defining boundaries that may be mirrored.""" +//| """Represents a shape made by defining boundaries that may be mirrored.""" //| //| def __init__(self, width: int, height: int, *, mirror_x: bool = False, mirror_y: bool = False): //| """Create a Shape object with the given fixed size. Each pixel is one bit and is stored by the diff --git a/shared-bindings/displayio/TileGrid.c b/shared-bindings/displayio/TileGrid.c index e7410e4b6..01fba46a5 100644 --- a/shared-bindings/displayio/TileGrid.c +++ b/shared-bindings/displayio/TileGrid.c @@ -41,10 +41,7 @@ #include "supervisor/shared/translate.h" //| class TileGrid: -//| """.. currentmodule:: displayio -//| -//| :class:`TileGrid` -- A grid of tiles sourced out of one bitmap -//| ========================================================================== +//| """A grid of tiles sourced out of one bitmap //| //| Position a grid of tiles sourced from a bitmap and pixel_shader combination. Multiple grids //| can share bitmaps and pixel shaders. diff --git a/shared-bindings/displayio/__init__.c b/shared-bindings/displayio/__init__.c index 37c025329..b791336b5 100644 --- a/shared-bindings/displayio/__init__.c +++ b/shared-bindings/displayio/__init__.c @@ -43,33 +43,10 @@ #include "shared-bindings/displayio/Shape.h" #include "shared-bindings/displayio/TileGrid.h" -//| """:mod:`displayio` --- Native display driving -//| ========================================================================= -//| -//| .. module:: displayio -//| :synopsis: Native helpers for driving displays -//| :platform: SAMD21, SAMD51, nRF52 +//| """Native helpers for driving displays //| //| The `displayio` module contains classes to manage display output -//| including synchronizing with refresh rates and partial updating. -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Bitmap -//| ColorConverter -//| Display -//| EPaperDisplay -//| FourWire -//| Group -//| I2CDisplay -//| OnDiskBitmap -//| Palette -//| ParallelBus -//| Shape -//| TileGrid""" +//| including synchronizing with refresh rates and partial updating.""" //| diff --git a/shared-bindings/fontio/BuiltinFont.c b/shared-bindings/fontio/BuiltinFont.c index f60c9e36c..bf9a65873 100644 --- a/shared-bindings/fontio/BuiltinFont.c +++ b/shared-bindings/fontio/BuiltinFont.c @@ -37,12 +37,7 @@ #include "supervisor/shared/translate.h" //| class BuiltinFont: -//| """.. currentmodule:: fontio -//| -//| :class:`BuiltinFont` -- A font built into CircuitPython -//| ========================================================================================= -//| -//| A font built into CircuitPython.""" +//| """A font built into CircuitPython""" //| //| def __init__(self, ): //| """Creation not supported. Available fonts are defined when CircuitPython is built. See the diff --git a/shared-bindings/fontio/Glyph.c b/shared-bindings/fontio/Glyph.c index 6235dbc46..6558e2e7a 100644 --- a/shared-bindings/fontio/Glyph.c +++ b/shared-bindings/fontio/Glyph.c @@ -29,22 +29,27 @@ #include //| class Glyph: -//| """.. currentmodule:: fontio +//| """Storage of glyph info""" //| -//| :class:`Glyph` -- Storage of glyph info -//| ==========================================================================""" -//| -//| def __init__(self, bitmap: displayio.Bitmap, tile_index: int, width: int, height: int, dx: int, dy: int, shift_x: int, shift_y: int): +//| def __init__(self, +//| bitmap: displayio.Bitmap, +//| tile_index: int, +//| width: int, +//| height: int, +//| dx: int, +//| dy: int, +//| shift_x: int, +//| shift_y: int): //| """Named tuple used to capture a single glyph and its attributes. //| -//| :param displayio.Bitmap bitmap: the bitmap including the glyph -//| :param int tile_index: the tile index within the bitmap -//| :param int width: the width of the glyph's bitmap -//| :param int height: the height of the glyph's bitmap -//| :param int dx: x adjustment to the bitmap's position -//| :param int dy: y adjustment to the bitmap's position -//| :param int shift_x: the x difference to the next glyph -//| :param int shift_y: the y difference to the next glyph""" +//| :param bitmap: the bitmap including the glyph +//| :param tile_index: the tile index within the bitmap +//| :param width: the width of the glyph's bitmap +//| :param height: the height of the glyph's bitmap +//| :param dx: x adjustment to the bitmap's position +//| :param dy: y adjustment to the bitmap's position +//| :param shift_x: the x difference to the next glyph +//| :param shift_y: the y difference to the next glyph""" //| ... //| const mp_obj_namedtuple_type_t fontio_glyph_type = { diff --git a/shared-bindings/fontio/__init__.c b/shared-bindings/fontio/__init__.c index 478fc1806..f376f3503 100644 --- a/shared-bindings/fontio/__init__.c +++ b/shared-bindings/fontio/__init__.c @@ -33,22 +33,7 @@ #include "shared-bindings/fontio/BuiltinFont.h" #include "shared-bindings/fontio/Glyph.h" -//| """:mod:`fontio` --- Core font related data structures -//| ========================================================================= -//| -//| .. module:: fontio -//| :synopsis: Core font related data structures -//| :platform: SAMD21, SAMD51, nRF52 -//| -//| The `fontio` module contains classes to store font related information. -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| BuiltinFont -//| Glyph""" +//| """Core font related data structures""" //| STATIC const mp_rom_map_elem_t fontio_module_globals_table[] = { diff --git a/shared-bindings/framebufferio/FramebufferDisplay.c b/shared-bindings/framebufferio/FramebufferDisplay.c index 5e63b988e..51ef09059 100644 --- a/shared-bindings/framebufferio/FramebufferDisplay.c +++ b/shared-bindings/framebufferio/FramebufferDisplay.c @@ -41,10 +41,7 @@ #include "supervisor/shared/translate.h" //| class FramebufferDisplay: -//| """.. currentmodule:: framebufferio -//| -//| :class:`FramebufferDisplay` -- Manage updating a display with framebuffer in RAM -//| ================================================================================ +//| """Manage updating a display with framebuffer in RAM //| //| This initializes a display and connects it into CircuitPython. Unlike other //| objects in CircuitPython, Display objects live until `displayio.release_displays()` diff --git a/shared-bindings/framebufferio/__init__.c b/shared-bindings/framebufferio/__init__.c index 50725c515..492423464 100644 --- a/shared-bindings/framebufferio/__init__.c +++ b/shared-bindings/framebufferio/__init__.c @@ -28,25 +28,13 @@ #include "shared-bindings/framebufferio/__init__.h" #include "shared-bindings/framebufferio/FramebufferDisplay.h" -//| """:mod:`framebufferio` --- Native framebuffer display driving -//| ========================================================================= -//| -//| .. module:: framebufferio -//| :synopsis: Native helpers for driving displays -//| :platform: SAMD51, nRF52 +//| """Native framebuffer display driving //| //| The `framebufferio` module contains classes to manage display output //| including synchronizing with refresh rates and partial updating. //| It is used in conjunction with classes from `displayio` to actually //| place items on the display; and classes like `RGBMatrix` to actually -//| drive the display. -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| FramebufferDisplay""" +//| drive the display.""" //| #if CIRCUITPY_FRAMEBUFFERIO diff --git a/shared-bindings/frequencyio/FrequencyIn.c b/shared-bindings/frequencyio/FrequencyIn.c index 270fa87c3..2d628088b 100644 --- a/shared-bindings/frequencyio/FrequencyIn.c +++ b/shared-bindings/frequencyio/FrequencyIn.c @@ -36,10 +36,7 @@ #include "supervisor/shared/translate.h" //| class FrequencyIn: -//| """.. currentmodule:: frequencyio -//| -//| :class:`FrequencyIn` -- Read a frequency signal -//| ======================================================== +//| """Read a frequency signal //| //| FrequencyIn is used to measure the frequency, in hertz, of a digital signal //| on an incoming pin. Accuracy has shown to be within 10%, if not better. It diff --git a/shared-bindings/frequencyio/__init__.c b/shared-bindings/frequencyio/__init__.c index 219d5f645..031004d4b 100644 --- a/shared-bindings/frequencyio/__init__.c +++ b/shared-bindings/frequencyio/__init__.c @@ -33,23 +33,8 @@ #include "shared-bindings/frequencyio/__init__.h" #include "shared-bindings/frequencyio/FrequencyIn.h" -//| """:mod:`frequencyio` --- Support for frequency based protocols -//| ============================================================= +//| """Support for frequency based protocols //| -//| .. module:: frequencyio -//| :synopsis: Support for frequency based protocols -//| :platform: SAMD51 -//| -//| The `frequencyio` module contains classes to provide access to basic frequency IO. -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| FrequencyIn -//| - //| .. warning:: This module is not available in SAMD21 builds. See the //| :ref:`module-support-matrix` for more info. //| diff --git a/shared-bindings/gamepad/GamePad.c b/shared-bindings/gamepad/GamePad.c index 946a24dbf..a750892fe 100644 --- a/shared-bindings/gamepad/GamePad.c +++ b/shared-bindings/gamepad/GamePad.c @@ -35,10 +35,7 @@ #include "supervisor/shared/translate.h" //| class GamePad: -//| """.. currentmodule:: gamepad -//| -//| :class:`GamePad` -- Scan buttons for presses -//| ============================================ +//| """Scan buttons for presses //| //| Usage:: //| @@ -90,7 +87,7 @@ //| on delays. //| //| They button presses are accumulated, until the ``get_pressed`` method -//| is called, at which point the button state is cleared, and the new +//| is called, at which point the button state is cleared, and the new //| button presses start to be recorded.""" //| ... //| diff --git a/shared-bindings/gamepad/__init__.c b/shared-bindings/gamepad/__init__.c index 0c32fd6c1..557777f50 100644 --- a/shared-bindings/gamepad/__init__.c +++ b/shared-bindings/gamepad/__init__.c @@ -29,17 +29,7 @@ #include "shared-bindings/gamepad/GamePad.h" #include "shared-bindings/util.h" -//| """:mod:`gamepad` --- Button handling -//| ================================== -//| -//| .. module:: gamepad -//| :synopsis: Button handling -//| :platform: SAMD21 -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| GamePad""" +//| """Button handling in the background""" //| STATIC const mp_rom_map_elem_t gamepad_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_gamepad) }, diff --git a/shared-bindings/gamepadshift/GamePadShift.c b/shared-bindings/gamepadshift/GamePadShift.c index 37be3d957..48b579457 100644 --- a/shared-bindings/gamepadshift/GamePadShift.c +++ b/shared-bindings/gamepadshift/GamePadShift.c @@ -33,10 +33,7 @@ #include "supervisor/shared/translate.h" //| class GamePadShift: -//| """.. currentmodule:: gamepadshift -//| -//| :class:`GamePadShift` -- Scan buttons for presses through a shift register -//| ===========================================================================""" +//| """Scan buttons for presses through a shift register""" //| //| def __init__(self, clock: Any, data: Any, latch: Any): //| """Initializes button scanning routines. diff --git a/shared-bindings/gamepadshift/__init__.c b/shared-bindings/gamepadshift/__init__.c index 3763b0487..f17135893 100644 --- a/shared-bindings/gamepadshift/__init__.c +++ b/shared-bindings/gamepadshift/__init__.c @@ -30,17 +30,7 @@ #include "shared-bindings/digitalio/DigitalInOut.h" #include "shared-bindings/util.h" -//| """:mod:`gamepadshift` --- Tracks button presses read through a shift register -//| =========================================================================== -//| -//| .. module:: gamepadshift -//| :synopsis: Tracks button presses read through a shift register -//| :platform: SAMD21, SAMD51 -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| GamePadShift""" +//| """Tracks button presses read through a shift register""" //| STATIC const mp_rom_map_elem_t gamepadshift_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_gamepadshift) }, diff --git a/shared-bindings/help.c b/shared-bindings/help.c deleted file mode 100644 index 4e7c3a78b..000000000 --- a/shared-bindings/help.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2016 Scott Shawcroft for Adafruit Industries - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -//| :func:`help` - Built-in method to provide helpful information -//| ============================================================== -//| -//| .. function:: help(object=None) -//| -//| Prints a help method about the given object. When ``object`` is none, -//| prints general port information. -//| diff --git a/shared-bindings/help.rst b/shared-bindings/help.rst new file mode 100644 index 000000000..63991bff2 --- /dev/null +++ b/shared-bindings/help.rst @@ -0,0 +1,31 @@ +# This file is part of the MicroPython project, http://micropython.org/ +# +# The MIT License (MIT) +# +# Copyright (c) 2016 Scott Shawcroft for Adafruit Industries +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to deal +# in the Software without restriction, including without limitation the rights +# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +# copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +# THE SOFTWARE. + +:func:`help` - Built-in method to provide helpful information +============================================================== + +.. function:: help(object=None) + + Prints a help method about the given object. When ``object`` is none, + prints general port information. diff --git a/shared-bindings/i2cslave/I2CSlave.c b/shared-bindings/i2cslave/I2CSlave.c index 5bab2af74..80875ce75 100644 --- a/shared-bindings/i2cslave/I2CSlave.c +++ b/shared-bindings/i2cslave/I2CSlave.c @@ -50,10 +50,7 @@ STATIC mp_obj_t mp_obj_new_i2cslave_i2c_slave_request(i2cslave_i2c_slave_obj_t * } //| class I2CSlave: -//| """.. currentmodule:: i2cslave -//| -//| :class:`I2CSlave` --- Two wire serial protocol slave -//| ----------------------------------------------------""" +//| """Two wire serial protocol slave""" //| //| def __init__(self, scl: microcontroller.Pin, sda: microcontroller.Pin, addresses: tuple, smbus: bool = False): //| """I2C is a two-wire protocol for communicating between devices. @@ -229,17 +226,15 @@ const mp_obj_type_t i2cslave_i2c_slave_type = { }; //| class I2CSlaveRequest: -//| """:class:`I2CSlaveRequest` --- I2C Slave Request -//| ----------------------------------------------""" //| //| def __init__(self, slave: i2cslave.I2CSlave, address: int, is_read: bool, is_restart: bool): //| """I2C transfer request from a master. //| This cannot be instantiated directly, but is returned by :py:meth:`I2CSlave.request`. //| -//| :param ~i2cslave.I2CSlave slave: The I2C Slave receiving this request -//| :param int address: I2C address -//| :param bool is_read: I2C Master read request -//| :param bool is_restart: Repeated Start Condition""" +//| :param slave: The I2C Slave receiving this request +//| :param address: I2C address +//| :param is_read: I2C Master read request +//| :param is_restart: Repeated Start Condition""" //| STATIC mp_obj_t i2cslave_i2c_slave_request_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 4, 4, false); @@ -264,7 +259,7 @@ STATIC mp_obj_t i2cslave_i2c_slave_request_obj___exit__(size_t n_args, const mp_ } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(i2cslave_i2c_slave_request___exit___obj, 4, 4, i2cslave_i2c_slave_request_obj___exit__); -//| address: Any = ... +//| address: int = ... //| """The I2C address of the request.""" //| STATIC mp_obj_t i2cslave_i2c_slave_request_get_address(mp_obj_t self_in) { @@ -274,7 +269,7 @@ STATIC mp_obj_t i2cslave_i2c_slave_request_get_address(mp_obj_t self_in) { } MP_DEFINE_CONST_PROP_GET(i2cslave_i2c_slave_request_address_obj, i2cslave_i2c_slave_request_get_address); -//| is_read: Any = ... +//| is_read: bool = ... //| """The I2C master is reading from the device.""" //| STATIC mp_obj_t i2cslave_i2c_slave_request_get_is_read(mp_obj_t self_in) { @@ -284,7 +279,7 @@ STATIC mp_obj_t i2cslave_i2c_slave_request_get_is_read(mp_obj_t self_in) { } MP_DEFINE_CONST_PROP_GET(i2cslave_i2c_slave_request_is_read_obj, i2cslave_i2c_slave_request_get_is_read); -//| is_restart: Any = ... +//| is_restart: bool = ... //| """Is Repeated Start Condition.""" //| STATIC mp_obj_t i2cslave_i2c_slave_request_get_is_restart(mp_obj_t self_in) { @@ -294,14 +289,13 @@ STATIC mp_obj_t i2cslave_i2c_slave_request_get_is_restart(mp_obj_t self_in) { } MP_DEFINE_CONST_PROP_GET(i2cslave_i2c_slave_request_is_restart_obj, i2cslave_i2c_slave_request_get_is_restart); -//| def read(self, n: int = -1, ack: bool = True) -> Any: +//| def read(self, n: int = -1, ack: bool = True) -> bytearray: //| """Read data. //| If ack=False, the caller is responsible for calling :py:meth:`I2CSlaveRequest.ack`. //| -//| :param int n: Number of bytes to read (negative means all) -//| :param bool ack: Whether or not to send an ACK after the n'th byte -//| :return: Bytes read -//| :rtype: bytearray""" +//| :param n: Number of bytes to read (negative means all) +//| :param ack: Whether or not to send an ACK after the n'th byte +//| :return: Bytes read""" //| ... //| STATIC mp_obj_t i2cslave_i2c_slave_request_read(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { @@ -355,10 +349,10 @@ STATIC mp_obj_t i2cslave_i2c_slave_request_read(size_t n_args, const mp_obj_t *p } MP_DEFINE_CONST_FUN_OBJ_KW(i2cslave_i2c_slave_request_read_obj, 1, i2cslave_i2c_slave_request_read); -//| def write(self, buffer: bytearray) -> Any: +//| def write(self, buffer: bytearray) -> int: //| """Write the data contained in buffer. //| -//| :param bytearray buffer: Write out the data in this buffer +//| :param buffer: Write out the data in this buffer //| :return: Number of bytes written""" //| ... //| @@ -393,7 +387,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(i2cslave_i2c_slave_request_write_obj, i2cslave_ //| """Acknowledge or Not Acknowledge last byte received. //| Use together with :py:meth:`I2CSlaveRequest.read` ack=False. //| -//| :param bool ack: Whether to send an ACK or NACK""" +//| :param ack: Whether to send an ACK or NACK""" //| ... //| STATIC mp_obj_t i2cslave_i2c_slave_request_ack(uint n_args, const mp_obj_t *args) { diff --git a/shared-bindings/i2cslave/__init__.c b/shared-bindings/i2cslave/__init__.c index ffeb216fa..41b42fef8 100644 --- a/shared-bindings/i2cslave/__init__.c +++ b/shared-bindings/i2cslave/__init__.c @@ -35,22 +35,10 @@ #include "py/runtime.h" -//| """:mod:`i2cslave` --- Two wire serial protocol slave -//| ================================================== -//| -//| .. module:: i2cslave -//| :synopsis: Two wire serial protocol slave -//| :platform: SAMD21, SAMD51 +//| """Two wire serial protocol slave //| //| The `i2cslave` module contains classes to support a I2C slave. //| -//| Classes -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| I2CSlave -//| //| Example emulating 2 devices:: //| //| import board diff --git a/shared-bindings/index.rst b/shared-bindings/index.rst index cbffdb614..d94177394 100644 --- a/shared-bindings/index.rst +++ b/shared-bindings/index.rst @@ -7,13 +7,17 @@ present or if flash space is limited. For example, a microcontroller without analog features will not have `analogio`. See the `support_matrix` page for a list of modules supported on each board. +.. toctree:: + :hidden: + + support_matrix + Modules --------- .. toctree:: :glob: - :maxdepth: 3 + :maxdepth: 2 - support_matrix - */__init__ + ../autoapi/*/index help diff --git a/shared-bindings/math/__init__.c b/shared-bindings/math/__init__.c index 755bf7589..56155306f 100644 --- a/shared-bindings/math/__init__.c +++ b/shared-bindings/math/__init__.c @@ -38,12 +38,7 @@ #define MP_PI MICROPY_FLOAT_CONST(3.14159265358979323846) -//| """:mod:`math` --- mathematical functions -//| ======================================================== -//| -//| .. module:: math -//| :synopsis: mathematical functions -//| :platform: SAMD21/SAMD51 +//| """mathematical functions //| //| The `math` module provides some basic mathematical functions for //| working with floating-point numbers.""" diff --git a/shared-bindings/microcontroller/Pin.c b/shared-bindings/microcontroller/Pin.c index cad0d67b1..765e602e5 100644 --- a/shared-bindings/microcontroller/Pin.c +++ b/shared-bindings/microcontroller/Pin.c @@ -34,12 +34,7 @@ #include "supervisor/shared/translate.h" //| class Pin: -//| """.. currentmodule:: microcontroller -//| -//| :class:`Pin` --- Pin reference -//| ------------------------------------------ -//| -//| Identifies an IO pin on the microcontroller.""" +//| """Identifies an IO pin on the microcontroller.""" //| //| def __init__(self, ): //| """Identifies an IO pin on the microcontroller. They are fixed by the diff --git a/shared-bindings/microcontroller/Processor.c b/shared-bindings/microcontroller/Processor.c index dedb5a27c..c4b249124 100644 --- a/shared-bindings/microcontroller/Processor.c +++ b/shared-bindings/microcontroller/Processor.c @@ -35,12 +35,7 @@ #include "py/runtime.h" //| class Processor: -//| """.. currentmodule:: microcontroller -//| -//| :class:`Processor` --- Microcontroller CPU information and control -//| ------------------------------------------------------------------ -//| -//| Get information about the microcontroller CPU and control it. +//| """Microcontroller CPU information and control //| //| Usage:: //| @@ -55,8 +50,8 @@ //| ... //| -//| frequency: Any = ... -//| """The CPU operating frequency as an `int`, in Hertz. (read-only)""" +//| frequency: int = ... +//| """The CPU operating frequency in Hertz. (read-only)""" //| STATIC mp_obj_t mcu_processor_get_frequency(mp_obj_t self) { return mp_obj_new_int_from_uint(common_hal_mcu_processor_get_frequency()); diff --git a/shared-bindings/microcontroller/RunMode.c b/shared-bindings/microcontroller/RunMode.c index df3ff4186..6db315d8d 100644 --- a/shared-bindings/microcontroller/RunMode.c +++ b/shared-bindings/microcontroller/RunMode.c @@ -27,10 +27,7 @@ #include "shared-bindings/microcontroller/RunMode.h" //| class RunMode: -//| """.. currentmodule:: microcontroller -//| -//| :class:`RunMode` -- run state of the microcontroller -//| =============================================================""" +//| """run state of the microcontroller""" //| //| def __init__(self, ): //| """Enum-like class to define the run mode of the microcontroller and diff --git a/shared-bindings/microcontroller/__init__.c b/shared-bindings/microcontroller/__init__.c index 75b763980..21e1c90a9 100644 --- a/shared-bindings/microcontroller/__init__.c +++ b/shared-bindings/microcontroller/__init__.c @@ -42,27 +42,13 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" -//| """:mod:`microcontroller` --- Pin references and cpu functionality -//| ================================================================ -//| -//| .. module:: microcontroller -//| :synopsis: Pin references and core functionality -//| :platform: SAMD21, ESP8266 +//| """Pin references and cpu functionality //| //| The `microcontroller` module defines the pins from the perspective of the -//| microcontroller. See `board` for board-specific pin mappings. -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Pin -//| Processor -//| RunMode""" +//| microcontroller. See `board` for board-specific pin mappings.""" //| -//| cpu: Any = ... +//| cpu: Processor = ... //| """CPU information and control, such as ``cpu.temperature`` and ``cpu.frequency`` //| (clock frequency). //| This object is the sole instance of `microcontroller.Processor`.""" diff --git a/shared-bindings/multiterminal/__init__.c b/shared-bindings/multiterminal/__init__.c index 3a4065019..baf2fb674 100644 --- a/shared-bindings/multiterminal/__init__.c +++ b/shared-bindings/multiterminal/__init__.c @@ -30,12 +30,7 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" -//| """:mod:`multiterminal` --- Manage additional terminal sources -//| =========================================================== -//| -//| .. module:: multiterminal -//| :synopsis: Manage additional terminal sources -//| :platform: ESP8266 +//| """Manage additional terminal sources //| //| The `multiterminal` module allows you to configure an additional serial //| terminal source. Incoming characters are accepted from both the internal diff --git a/shared-bindings/neopixel_write/__init__.c b/shared-bindings/neopixel_write/__init__.c index f18c7fdfd..5e5bc31eb 100644 --- a/shared-bindings/neopixel_write/__init__.c +++ b/shared-bindings/neopixel_write/__init__.c @@ -31,12 +31,7 @@ #include "shared-bindings/digitalio/DigitalInOut.h" #include "supervisor/shared/translate.h" -//| """:mod:`neopixel_write` --- Low-level neopixel implementation -//| =========================================================== -//| -//| .. module:: neopixel_write -//| :synopsis: Low-level neopixel implementation -//| :platform: SAMD21 +//| """Low-level neopixel implementation //| //| The `neopixel_write` module contains a helper method to write out bytes in //| the 800khz neopixel protocol. @@ -55,11 +50,11 @@ //| pixel_off = bytearray([0, 0, 0]) //| neopixel_write.neopixel_write(pin, pixel_off)""" //| -//| def neopixel_write(digitalinout: digitalio.DigitalInOut, buf: bytearray) -> Any: +//| def neopixel_write(digitalinout: digitalio.DigitalInOut, buf: bytearray) -> None: //| """Write buf out on the given DigitalInOut. //| -//| :param ~digitalio.DigitalInOut digitalinout: the DigitalInOut to output with -//| :param bytearray buf: The bytes to clock out. No assumption is made about color order""" +//| :param digitalinout: the DigitalInOut to output with +//| :param buf: The bytes to clock out. No assumption is made about color order""" //| ... STATIC mp_obj_t neopixel_write_neopixel_write_(mp_obj_t digitalinout_obj, mp_obj_t buf) { if (!MP_OBJ_IS_TYPE(digitalinout_obj, &digitalio_digitalinout_type)) { diff --git a/shared-bindings/network/__init__.c b/shared-bindings/network/__init__.c index 4f03781cf..6af86688e 100644 --- a/shared-bindings/network/__init__.c +++ b/shared-bindings/network/__init__.c @@ -38,12 +38,7 @@ #if CIRCUITPY_NETWORK -//| """:mod:`network` --- Network Interface Management -//| =============================================== -//| -//| .. module:: network -//| :synopsis: Network Interface Management -//| :platform: SAMD +//| """Network Interface Management //| //| This module provides a registry of configured NICs. //| It is used by the 'socket' module to look up a suitable diff --git a/shared-bindings/nvm/ByteArray.c b/shared-bindings/nvm/ByteArray.c index a28c2c4f9..326f719a8 100644 --- a/shared-bindings/nvm/ByteArray.c +++ b/shared-bindings/nvm/ByteArray.c @@ -31,14 +31,8 @@ #include "shared-bindings/nvm/ByteArray.h" #include "supervisor/shared/translate.h" - - - //| class ByteArray: -//| """.. currentmodule:: nvm -//| -//| :class:`ByteArray` -- Presents a stretch of non-volatile memory as a bytearray. -//| ================================================================================ +//| """Presents a stretch of non-volatile memory as a bytearray. //| //| Non-volatile memory is available as a byte array that persists over reloads //| and power cycles. Each assignment causes an erase and write cycle so its recommended to assign diff --git a/shared-bindings/nvm/__init__.c b/shared-bindings/nvm/__init__.c index 3bd9a309b..51c5bb278 100644 --- a/shared-bindings/nvm/__init__.c +++ b/shared-bindings/nvm/__init__.c @@ -31,23 +31,10 @@ #include "shared-bindings/nvm/__init__.h" #include "shared-bindings/nvm/ByteArray.h" -//| """:mod:`nvm` --- Non-volatile memory -//| =========================================================== -//| -//| .. module:: nvm -//| :synopsis: Non-volatile memory -//| :platform: SAMD21 +//| """Non-volatile memory //| //| The `nvm` module allows you to store whatever raw bytes you wish in a -//| reserved section non-volatile memory. -//| - -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| ByteArray""" +//| reserved section non-volatile memory.""" //| STATIC const mp_rom_map_elem_t nvm_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_nvm) }, diff --git a/shared-bindings/os/__init__.c b/shared-bindings/os/__init__.c index 2a6b13c9b..4e991d089 100644 --- a/shared-bindings/os/__init__.c +++ b/shared-bindings/os/__init__.c @@ -37,12 +37,7 @@ #include "py/runtime.h" #include "shared-bindings/os/__init__.h" -//| """:mod:`os` --- functions that an OS normally provides -//| ======================================================== -//| -//| .. module:: os -//| :synopsis: functions that an OS normally provides -//| :platform: SAMD21 +//| """functions that an OS normally provides //| //| The `os` module is a strict subset of the CPython `cpython:os` module. So, //| code written in CircuitPython will work in CPython but not necessarily the diff --git a/shared-bindings/ps2io/Ps2.c b/shared-bindings/ps2io/Ps2.c index d327d4180..a87b14ddd 100644 --- a/shared-bindings/ps2io/Ps2.c +++ b/shared-bindings/ps2io/Ps2.c @@ -37,10 +37,7 @@ #include "supervisor/shared/translate.h" //| class Ps2: -//| """.. currentmodule:: ps2io -//| -//| :class:`Ps2` -- Communicate with a PS/2 keyboard or mouse -//| ========================================================= +//| """Communicate with a PS/2 keyboard or mouse //| //| Ps2 implements the PS/2 keyboard/mouse serial protocol, used in //| legacy devices. It is similar to UART but there are only two diff --git a/shared-bindings/ps2io/__init__.c b/shared-bindings/ps2io/__init__.c index 081127bac..38a70b1a2 100644 --- a/shared-bindings/ps2io/__init__.c +++ b/shared-bindings/ps2io/__init__.c @@ -33,22 +33,10 @@ #include "shared-bindings/microcontroller/Pin.h" #include "shared-bindings/ps2io/Ps2.h" -//| """:mod:`ps2io` --- Support for PS/2 protocol -//| ===================================================== -//| -//| .. module:: ps2io -//| :synopsis: Support for PS/2 based devices -//| :platform: SAMD21 +//| """Support for PS/2 protocol //| //| The `ps2io` module contains classes to provide PS/2 communication. //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Ps2 -//| //| .. warning:: This module is not available in some SAMD21 builds. See the //| :ref:`module-support-matrix` for more info. diff --git a/shared-bindings/pulseio/PWMOut.c b/shared-bindings/pulseio/PWMOut.c index 3a25d6938..7970c02f3 100644 --- a/shared-bindings/pulseio/PWMOut.c +++ b/shared-bindings/pulseio/PWMOut.c @@ -36,12 +36,7 @@ #include "supervisor/shared/translate.h" //| class PWMOut: -//| """.. currentmodule:: pulseio -//| -//| :class:`PWMOut` -- Output a Pulse Width Modulated signal -//| ======================================================== -//| -//| PWMOut can be used to output a PWM signal on a given pin.""" +//| """Output a Pulse Width Modulated signal on a given pin.""" //| //| def __init__(self, pin: microcontroller.Pin, *, duty_cycle: int = 0, frequency: int = 500, variable_frequency: bool = False): //| """Create a PWM object associated with the given pin. This allows you to diff --git a/shared-bindings/pulseio/PulseIn.c b/shared-bindings/pulseio/PulseIn.c index 9024f53e3..5c52b2582 100644 --- a/shared-bindings/pulseio/PulseIn.c +++ b/shared-bindings/pulseio/PulseIn.c @@ -36,15 +36,9 @@ #include "supervisor/shared/translate.h" //| class PulseIn: -//| """.. currentmodule:: pulseio -//| -//| :class:`PulseIn` -- Read a series of pulse durations -//| ======================================================== -//| -//| PulseIn is used to measure a series of active and idle pulses. This is -//| commonly used in infrared receivers and low cost temperature sensors (DHT). -//| The pulsed signal consists of timed active and idle periods. Unlike PWM, -//| there is no set duration for active and idle pairs.""" +//| """Measure a series of active and idle pulses. This is commonly used in infrared receivers +//| and low cost temperature sensors (DHT). The pulsed signal consists of timed active and +//| idle periods. Unlike PWM, there is no set duration for active and idle pairs.""" //| //| def __init__(self, pin: microcontroller.Pin, maxlen: int = 2, *, idle_state: bool = False): //| """Create a PulseIn object associated with the given pin. The object acts as diff --git a/shared-bindings/pulseio/PulseOut.c b/shared-bindings/pulseio/PulseOut.c index 9c650731b..16b0a6f0c 100644 --- a/shared-bindings/pulseio/PulseOut.c +++ b/shared-bindings/pulseio/PulseOut.c @@ -37,14 +37,9 @@ #include "supervisor/shared/translate.h" //| class PulseOut: -//| """.. currentmodule:: pulseio -//| -//| :class:`PulseOut` -- Output a pulse train -//| ======================================================== -//| -//| PulseOut is used to pulse PWM "carrier" output on and off. This is commonly -//| used in infrared remotes. The pulsed signal consists of timed on and off -//| periods. Unlike PWM, there is no set duration for on and off pairs.""" +//| """Pulse PWM "carrier" output on and off. This is commonly used in infrared remotes. The +//| pulsed signal consists of timed on and off periods. Unlike PWM, there is no set duration +//| for on and off pairs.""" //| //| def __init__(self, carrier: pulseio.PWMOut): //| """Create a PulseOut object associated with the given PWMout object. @@ -115,7 +110,7 @@ STATIC mp_obj_t pulseio_pulseout_obj___exit__(size_t n_args, const mp_obj_t *arg } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pulseio_pulseout___exit___obj, 4, 4, pulseio_pulseout_obj___exit__); -//| def send(self, pulses: array.array) -> Any: +//| def send(self, pulses: array.array) -> Any: //| """Pulse alternating on and off durations in microseconds starting with on. //| ``pulses`` must be an `array.array` with data type 'H' for unsigned //| halfword (two bytes). diff --git a/shared-bindings/pulseio/__init__.c b/shared-bindings/pulseio/__init__.c index 70cb61fc3..87946e5f0 100644 --- a/shared-bindings/pulseio/__init__.c +++ b/shared-bindings/pulseio/__init__.c @@ -35,24 +35,10 @@ #include "shared-bindings/pulseio/PulseOut.h" #include "shared-bindings/pulseio/PWMOut.h" -//| """:mod:`pulseio` --- Support for pulse based protocols -//| ===================================================== -//| -//| .. module:: pulseio -//| :synopsis: Support for pulse based protocols -//| :platform: SAMD21, ESP8266 +//| """Support for pulse based protocols //| //| The `pulseio` module contains classes to provide access to basic pulse IO. //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| PulseIn -//| PulseOut -//| PWMOut -//| //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either diff --git a/shared-bindings/random/__init__.c b/shared-bindings/random/__init__.c index d8b266be0..c0124df41 100644 --- a/shared-bindings/random/__init__.c +++ b/shared-bindings/random/__init__.c @@ -33,12 +33,7 @@ #include "shared-bindings/random/__init__.h" #include "supervisor/shared/translate.h" -//| """:mod:`random` --- pseudo-random numbers and choices -//| ======================================================== -//| -//| .. module:: random -//| :synopsis: pseudo-random numbers and choices -//| :platform: SAMD21, ESP8266 +//| """pseudo-random numbers and choices //| //| The `random` module is a strict subset of the CPython `cpython:random` //| module. So, code written in CircuitPython will work in CPython but not diff --git a/shared-bindings/rgbmatrix/RGBMatrix.c b/shared-bindings/rgbmatrix/RGBMatrix.c index e2393eb61..cbf570958 100644 --- a/shared-bindings/rgbmatrix/RGBMatrix.c +++ b/shared-bindings/rgbmatrix/RGBMatrix.c @@ -39,10 +39,7 @@ #include "shared-module/framebufferio/FramebufferDisplay.h" //| class RGBMatrix: -//| """.. currentmodule:: rgbmatrix -//| -//| :class:`RGBMatrix` -- Driver for HUB75-style RGB LED matrices -//| ================================================================ +//| """Displays an in-memory framebuffer to a HUB75-style RGB LED matrix.""" //| extern Protomatter_core *_PM_protoPtr; @@ -134,9 +131,6 @@ STATIC void preflight_pins_or_throw(uint8_t clock_pin, uint8_t *rgb_pins, uint8_ } } - -//| :class:`~rgbmatrix.RGBMatrix` displays an in-memory framebuffer to an LED matrix.""" -//| //| def __init__(self, *, width: Any, bit_depth: Any, rgb_pins: Any, addr_pins: Any, clock_pin: Any, latch_pin: Any, output_enable_pin: Any, doublebuffer: Any = True, framebuffer: Any = None, height: Any = 0): //| """Create a RGBMatrix object with the given attributes. The height of //| the display is determined by the number of rgb and address pins: @@ -297,7 +291,7 @@ const mp_obj_property_t rgbmatrix_rgbmatrix_brightness_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| def refresh(self, ) -> Any: ... +//| def refresh(self) -> Any: ... //| """Transmits the color data in the buffer to the pixels so that //| they are shown.""" //| @@ -309,7 +303,7 @@ STATIC mp_obj_t rgbmatrix_rgbmatrix_refresh(mp_obj_t self_in) { } MP_DEFINE_CONST_FUN_OBJ_1(rgbmatrix_rgbmatrix_refresh_obj, rgbmatrix_rgbmatrix_refresh); -//| width: Any = ... +//| width: int = ... //| """The width of the display, in pixels""" //| STATIC mp_obj_t rgbmatrix_rgbmatrix_get_width(mp_obj_t self_in) { @@ -325,7 +319,7 @@ const mp_obj_property_t rgbmatrix_rgbmatrix_width_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| height: Any = ... +//| height: int = ... //| """The height of the display, in pixels""" //| STATIC mp_obj_t rgbmatrix_rgbmatrix_get_height(mp_obj_t self_in) { diff --git a/shared-bindings/rgbmatrix/__init__.c b/shared-bindings/rgbmatrix/__init__.c index f61002a78..7f0576652 100644 --- a/shared-bindings/rgbmatrix/__init__.c +++ b/shared-bindings/rgbmatrix/__init__.c @@ -31,16 +31,7 @@ #include "shared-bindings/rgbmatrix/RGBMatrix.h" -//| """:mod:`rgbmatrix` --- Low-level routines for bitbanged LED matrices -//| ===================================================================== -//| -//| .. module:: rgbmatrix -//| :synopsis: Low-level routines for bitbanged LED matrices -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| RGBMatrix""" +//| """Low-level routines for bitbanged LED matrices""" //| STATIC const mp_rom_map_elem_t rgbmatrix_module_globals_table[] = { diff --git a/shared-bindings/rotaryio/IncrementalEncoder.c b/shared-bindings/rotaryio/IncrementalEncoder.c index a10fb6fd5..8b2723866 100644 --- a/shared-bindings/rotaryio/IncrementalEncoder.c +++ b/shared-bindings/rotaryio/IncrementalEncoder.c @@ -35,12 +35,7 @@ #include "shared-bindings/util.h" //| class IncrementalEncoder: -//| """.. currentmodule:: rotaryio -//| -//| :class:`IncrementalEncoder` -- Track the relative position of an incremental encoder -//| ==================================================================================== -//| -//| IncrementalEncoder determines the relative rotational position based on two series of pulses.""" +//| """IncrementalEncoder determines the relative rotational position based on two series of pulses.""" //| //| def __init__(self, pin_a: microcontroller.Pin, pin_b: microcontroller.Pin): //| """Create an IncrementalEncoder object associated with the given pins. It tracks the positional diff --git a/shared-bindings/rotaryio/__init__.c b/shared-bindings/rotaryio/__init__.c index 0cc8eb556..0fa457ca7 100644 --- a/shared-bindings/rotaryio/__init__.c +++ b/shared-bindings/rotaryio/__init__.c @@ -33,27 +33,13 @@ #include "shared-bindings/rotaryio/__init__.h" #include "shared-bindings/rotaryio/IncrementalEncoder.h" -//| """:mod:`rotaryio` --- Support for reading rotation sensors -//| ======================================================== -//| -//| .. module:: rotaryio -//| :synopsis: Support for reading rotation sensors -//| :platform: SAMD +//| """Support for reading rotation sensors //| //| The `rotaryio` module contains classes to read different rotation encoding schemes. See //| `Wikipedia's Rotary Encoder page `_ for more //| background. -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| IncrementalEncoder -//| -//| .. warning:: This module is not available in some SAMD21 (aka M0) builds. See the -//| :ref:`module-support-matrix` for more info. +//| .. warning:: This module is not available in some SAMD21 (aka M0) builds. See the :ref:`module-support-matrix` for more info. //| //| All classes change hardware state and should be deinitialized when they diff --git a/shared-bindings/rtc/RTC.c b/shared-bindings/rtc/RTC.c index 663f5be6c..58fe308f5 100644 --- a/shared-bindings/rtc/RTC.c +++ b/shared-bindings/rtc/RTC.c @@ -38,15 +38,8 @@ const rtc_rtc_obj_t rtc_rtc_obj = {{&rtc_rtc_type}}; - - - - //| class RTC: -//| """.. currentmodule:: rtc -//| -//| :class:`RTC` --- Real Time Clock -//| --------------------------------""" +//| """Real Time Clock""" //| //| def __init__(self, ): //| """This class represents the onboard Real Time Clock. It is a singleton and will always return the same instance.""" @@ -60,7 +53,7 @@ STATIC mp_obj_t rtc_rtc_make_new(const mp_obj_type_t *type, size_t n_args, const return (mp_obj_t)&rtc_rtc_obj; } -//| datetime: Any = ... +//| datetime: time.struct_time = ... //| """The current date and time of the RTC as a `time.struct_time`. //| //| This must be set to the current date and time whenever the board loses power:: @@ -101,7 +94,7 @@ const mp_obj_property_t rtc_rtc_datetime_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| calibration: Any = ... +//| calibration: int = ... //| """The RTC calibration value as an `int`. //| //| A positive value speeds up the clock and a negative value slows it down. diff --git a/shared-bindings/rtc/__init__.c b/shared-bindings/rtc/__init__.c index 66669ca5f..b204d511c 100644 --- a/shared-bindings/rtc/__init__.c +++ b/shared-bindings/rtc/__init__.c @@ -31,23 +31,11 @@ #include "shared-bindings/rtc/RTC.h" #include "shared-bindings/time/__init__.h" -//| """:mod:`rtc` --- Real Time Clock -//| ======================================================== -//| -//| .. module:: rtc -//| :synopsis: Real Time Clock -//| :platform: SAMD21, SAMD51, nRF52 +//| """Real Time Clock //| //| The `rtc` module provides support for a Real Time Clock. You can access and manage the //| RTC using :class:`rtc.RTC`. It also backs the :func:`time.time` and :func:`time.localtime` -//| functions using the onboard RTC if present. -//| -//| Classes -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| RTC""" +//| functions using the onboard RTC if present.""" //| void rtc_reset(void) { diff --git a/shared-bindings/socket/__init__.c b/shared-bindings/socket/__init__.c index 4c0811bdb..19c4850cd 100644 --- a/shared-bindings/socket/__init__.c +++ b/shared-bindings/socket/__init__.c @@ -37,12 +37,7 @@ #include "shared-module/network/__init__.h" -//| """:mod:`socket` --- TCP, UDP and RAW socket support -//| ================================================= -//| -//| .. module:: socket -//| :synopsis: TCP, UDP and RAW sockets -//| :platform: SAMD21, SAMD51 +//| """TCP, UDP and RAW socket support //| //| Create TCP, UDP and RAW sockets for communicating over the Internet.""" //| @@ -50,7 +45,6 @@ STATIC const mp_obj_type_t socket_type; //| class socket: -//| """.. currentmodule:: socket""" //| //| def __init__(self, family: int, type: int, proto: int): //| """Create a new socket diff --git a/shared-bindings/storage/__init__.c b/shared-bindings/storage/__init__.c index feb1a9bd7..8ac08d8c9 100644 --- a/shared-bindings/storage/__init__.c +++ b/shared-bindings/storage/__init__.c @@ -35,12 +35,7 @@ #include "shared-bindings/storage/__init__.h" #include "supervisor/shared/translate.h" -//| """:mod:`storage` --- storage management -//| ======================================================== -//| -//| .. module:: storage -//| :synopsis: storage management -//| :platform: SAMD21, SAMD51 +//| """Storage management //| //| The `storage` provides storage management functionality such as mounting and //| unmounting which is typically handled by the operating system hosting Python. diff --git a/shared-bindings/struct/__init__.c b/shared-bindings/struct/__init__.c index 3772f93a7..256b385c8 100644 --- a/shared-bindings/struct/__init__.c +++ b/shared-bindings/struct/__init__.c @@ -38,12 +38,7 @@ #include "shared-module/struct/__init__.h" #include "supervisor/shared/translate.h" -//| """:mod:`struct` --- manipulation of c-style data -//| ======================================================== -//| -//| .. module:: struct -//| :synopsis: byte data control -//| :platform: SAMD21 +//| """Manipulation of c-style data //| //| This module implements a subset of the corresponding CPython module, //| as described below. For more information, refer to the original CPython @@ -56,7 +51,7 @@ //| -//| def calcsize(fmt: Any) -> Any: +//| def calcsize(fmt: str) -> int: //| """Return the number of bytes needed to store the given fmt.""" //| ... //| diff --git a/shared-bindings/supervisor/Runtime.c b/shared-bindings/supervisor/Runtime.c index 05921899c..a420d5b80 100755 --- a/shared-bindings/supervisor/Runtime.c +++ b/shared-bindings/supervisor/Runtime.c @@ -30,12 +30,7 @@ //TODO: add USB, REPL to description once they're operational //| class Runtime: -//| """.. currentmodule:: supervisor -//| -//| :class:`Runtime` --- Supervisor Runtime information -//| ---------------------------------------------------- -//| -//| Get current status of runtime objects. +//| """Current status of runtime objects. //| //| Usage:: //| @@ -50,7 +45,7 @@ //| ... //| -//| runtime.serial_connected: Any = ... +//| serial_connected: bool = ... //| """Returns the USB serial communication status (read-only). //| //| .. note:: @@ -78,7 +73,7 @@ const mp_obj_property_t supervisor_serial_connected_obj = { }; -//| runtime.serial_bytes_available: Any = ... +//| serial_bytes_available: int = ... //| """Returns the whether any bytes are available to read //| on the USB serial input. Allows for polling to see whether //| to call the built-in input() or wait. (read-only)""" diff --git a/shared-bindings/supervisor/__init__.c b/shared-bindings/supervisor/__init__.c index 7fe6668f4..1830308b7 100644 --- a/shared-bindings/supervisor/__init__.c +++ b/shared-bindings/supervisor/__init__.c @@ -36,30 +36,16 @@ #include "shared-bindings/supervisor/__init__.h" #include "shared-bindings/supervisor/Runtime.h" -//| """:mod:`supervisor` --- Supervisor settings -//| ================================================= -//| -//| .. module:: supervisor -//| :synopsis: Supervisor settings -//| :platform: SAMD21/51 (All), nRF (Runtime only) -//| -//| The `supervisor` module. (TODO: expand description) -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Runtime""" +//| """Supervisor settings""" //| -//| runtime: Any = ... -//| """Runtime information, such as `runtime.serial_connected` +//| runtime: Runtime = ... +//| """Runtime information, such as ``runtime.serial_connected`` //| (USB serial connection status). //| This object is the sole instance of `supervisor.Runtime`.""" //| -//| def enable_autoreload(self, ) -> Any: +//| def enable_autoreload(self) -> None: //| """Enable autoreload based on USB file write activity.""" //| ... //| @@ -69,7 +55,7 @@ STATIC mp_obj_t supervisor_enable_autoreload(void) { } MP_DEFINE_CONST_FUN_OBJ_0(supervisor_enable_autoreload_obj, supervisor_enable_autoreload); -//| def disable_autoreload(self, ) -> Any: +//| def disable_autoreload(self) -> None: //| """Disable autoreload based on USB file write activity until //| `enable_autoreload` is called.""" //| ... @@ -80,7 +66,7 @@ STATIC mp_obj_t supervisor_disable_autoreload(void) { } MP_DEFINE_CONST_FUN_OBJ_0(supervisor_disable_autoreload_obj, supervisor_disable_autoreload); -//| def set_rgb_status_brightness(self, ) -> Any: +//| def set_rgb_status_brightness(self, brightness: int) -> None: //| """Set brightness of status neopixel from 0-255 //| `set_rgb_status_brightness` is called.""" //| ... @@ -96,7 +82,7 @@ STATIC mp_obj_t supervisor_set_rgb_status_brightness(mp_obj_t lvl){ } MP_DEFINE_CONST_FUN_OBJ_1(supervisor_set_rgb_status_brightness_obj, supervisor_set_rgb_status_brightness); -//| def reload(self, ) -> Any: +//| def reload(self) -> None: //| """Reload the main Python code and run it (equivalent to hitting Ctrl-D at the REPL).""" //| ... //| @@ -107,7 +93,7 @@ STATIC mp_obj_t supervisor_reload(void) { } MP_DEFINE_CONST_FUN_OBJ_0(supervisor_reload_obj, supervisor_reload); -//| def set_next_stack_limit(self, size: Any) -> Any: +//| def set_next_stack_limit(self, size: int) -> None: //| """Set the size of the stack for the next vm run. If its too large, the default will be used.""" //| ... //| diff --git a/shared-bindings/terminalio/Terminal.c b/shared-bindings/terminalio/Terminal.c index 1288b7018..5c045fdee 100644 --- a/shared-bindings/terminalio/Terminal.c +++ b/shared-bindings/terminalio/Terminal.c @@ -38,10 +38,7 @@ #include "supervisor/shared/translate.h" //| class Terminal: -//| """.. currentmodule:: terminalio -//| -//| :class:`Terminal` -- display a character stream with a TileGrid -//| ================================================================""" +//| """Display a character stream with a TileGrid""" //| //| def __init__(self, tilegrid: Any, font: Any): //| """Terminal manages tile indices and cursor position based on VT100 commands. The font should be diff --git a/shared-bindings/terminalio/__init__.c b/shared-bindings/terminalio/__init__.c index 591be839a..589211139 100644 --- a/shared-bindings/terminalio/__init__.c +++ b/shared-bindings/terminalio/__init__.c @@ -35,22 +35,10 @@ #include "py/runtime.h" -//| """:mod:`terminalio` --- Displays text in a TileGrid -//| ================================================= -//| -//| .. module:: terminalio -//| :synopsis: Displays text in a TileGrid +//| """Displays text in a TileGrid //| //| The `terminalio` module contains classes to display a character stream on a display. The built -//| in font is available as ``terminalio.FONT``. -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Terminal""" -//| +//| in font is available as ``terminalio.FONT``.""" //| STATIC const mp_rom_map_elem_t terminalio_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_terminalio) }, diff --git a/shared-bindings/time/__init__.c b/shared-bindings/time/__init__.c index 36eaa27f6..20277d6b0 100644 --- a/shared-bindings/time/__init__.c +++ b/shared-bindings/time/__init__.c @@ -36,12 +36,7 @@ #include "shared-bindings/time/__init__.h" #include "supervisor/shared/translate.h" -//| """:mod:`time` --- time and timing related functions -//| ======================================================== -//| -//| .. module:: time -//| :synopsis: time and timing related functions -//| :platform: SAMD21 +//| """time and timing related functions //| //| The `time` module is a strict subset of the CPython `cpython:time` module. So, code //| written in MicroPython will work in CPython but not necessarily the other diff --git a/shared-bindings/touchio/TouchIn.c b/shared-bindings/touchio/TouchIn.c index 6d59a1744..4c1d534ea 100644 --- a/shared-bindings/touchio/TouchIn.c +++ b/shared-bindings/touchio/TouchIn.c @@ -39,10 +39,7 @@ #include "supervisor/shared/translate.h" //| class TouchIn: -//| """.. currentmodule:: touchio -//| -//| :class:`TouchIn` -- Read the state of a capacitive touch sensor -//| =================================================================== +//| """Read the state of a capacitive touch sensor //| //| Usage:: //| diff --git a/shared-bindings/touchio/__init__.c b/shared-bindings/touchio/__init__.c index 96367f082..92e067cf6 100644 --- a/shared-bindings/touchio/__init__.c +++ b/shared-bindings/touchio/__init__.c @@ -35,23 +35,11 @@ #include "py/runtime.h" -//| """:mod:`touchio` --- Touch related IO -//| ================================================= -//| -//| .. module:: touchio -//| :synopsis: Hardware accelerated behavior -//| :platform: SAMD21 +//| """Touch related IO //| //| The `touchio` module contains classes to provide access to touch IO typically //| accelerated by hardware on the onboard microcontroller. //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| TouchIn -//| //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either //| call :py:meth:`!deinit` or use a context manager. See diff --git a/shared-bindings/uheap/__init__.c b/shared-bindings/uheap/__init__.c index f1be30424..f089f2922 100644 --- a/shared-bindings/uheap/__init__.c +++ b/shared-bindings/uheap/__init__.c @@ -31,11 +31,7 @@ #include "shared-bindings/uheap/__init__.h" -//| """:mod:`uheap` --- Heap size analysis -//| ================================================================ -//| -//| .. module:: uheap -//| :synopsis: Heap size analysis""" +//| """Heap size analysis""" //| //| def info(object: Any) -> Any: diff --git a/shared-bindings/ulab/__init__.pyi b/shared-bindings/ulab/__init__.pyi new file mode 100644 index 000000000..d2ff7eb80 --- /dev/null +++ b/shared-bindings/ulab/__init__.pyi @@ -0,0 +1,523 @@ + +:mod:`ulab` --- Manipulate numeric data similar to numpy +======================================================== + +.. module:: ulab + :synopsis: Manipulate numeric data similar to numpy + +`ulab` is a numpy-like module for micropython, meant to simplify and +speed up common mathematical operations on arrays. The primary goal was to +implement a small subset of numpy that might be useful in the context of a +microcontroller. This means low-level data processing of linear (array) and +two-dimensional (matrix) data. + +`ulab` is adapted from micropython-ulab, and the original project's +documentation can be found at +https://micropython-ulab.readthedocs.io/en/latest/ + +`ulab` is modeled after numpy, and aims to be a compatible subset where +possible. Numpy's documentation can be found at +https://docs.scipy.org/doc/numpy/index.html + +.. contents:: + +.. attribute:: __version__ + +The closest corresponding version of micropython-ulab + +ulab.array -- 1- and 2- dimensional array +----------------------------------------- + +.. class:: ulab.array(values, \*, dtype=float) + + :param sequence values: Sequence giving the initial content of the array. + :param dtype: The type of array values, ``int8``, ``uint8``, ``int16``, ``uint16``, or ``float`` + + The `values` sequence can either be another ~ulab.array, sequence of numbers + (in which case a 1-dimensional array is created), or a sequence where each + subsequence has the same length (in which case a 2-dimensional array is + created). + + Passing a ~ulab.array and a different dtype can be used to convert an array + from one dtype to another. + + In many cases, it is more convenient to create an array from a function + like `zeros` or `linspace`. + + `ulab.array` implements the buffer protocol, so it can be used in many + places an `array.array` can be used. + + .. attribute:: shape + + The size of the array, a tuple of length 1 or 2 + + .. attribute:: size + + The number of elements in the array + + .. attribute:: itemsize + + The number of elements in the array + + .. method:: flatten(\*, order='C') + + :param order: Whether to flatten by rows ('C') or columns ('F') + + Returns a new `ulab.array` object which is always 1 dimensional. + If order is 'C' (the default", then the data is ordered in rows; + If it is 'F', then the data is ordered in columns. "C" and "F" refer + to the typical storage organization of the C and Fortran languages. + + .. method:: sort(\*, axis=1) + + :param axis: Whether to sort elements within rows (0), columns (1), or elements (None) + + .. method:: transpose() + + Swap the rows and columns of a 2-dimensional array + + .. method:: __add__() + + Adds corresponding elements of the two arrays, or adds a number to all + elements of the array. If both arguments are arrays, their sizes must match. + + .. method:: __sub__() + + Subtracts corresponding elements of the two arrays, or adds a number to all + elements of the array. If both arguments are arrays, their sizes must match. + + .. method:: __mul__() + + Multiplies corresponding elements of the two arrays, or multiplies + all elements of the array by a number. If both arguments are arrays, + their sizes must match. + + .. method:: __div__() + + Multiplies corresponding elements of the two arrays, or divides + all elements of the array by a number. If both arguments are arrays, + their sizes must match. + + .. method:: __pow__() + + Computes the power (x**y) of corresponding elements of the the two arrays, + or one number and one array. If both arguments are arrays, their sizes + must match. + + .. method:: __getitem__() + + Retrieve an element of the array. + + .. method:: __setitem__() + + Set an element of the array. + +Array type codes +---------------- +.. attribute:: int8 + + Type code for signed integers in the range -128 .. 127 inclusive, like the 'b' typecode of `array.array` + +.. attribute:: int16 + + Type code for signed integers in the range -32768 .. 32767 inclusive, like the 'h' typecode of `array.array` + +.. attribute:: float + + Type code for floating point values, like the 'f' typecode of `array.array` + +.. attribute:: uint8 + + Type code for unsigned integers in the range 0 .. 255 inclusive, like the 'H' typecode of `array.array` + +.. attribute:: uint16 + + Type code for unsigned integers in the range 0 .. 65535 inclusive, like the 'h' typecode of `array.array` + + +Basic Array defining functions +------------------------------ + +.. method:: ones(shape, \*, dtype=float) + + .. param: shape + Shape of the array, either an integer (for a 1-D array) or a tuple of 2 integers (for a 2-D array) + + .. param: dtype + Type of values in the array + + Return a new array of the given shape with all elements set to 1. + +.. method:: zeros + + .. param: shape + Shape of the array, either an integer (for a 1-D array) or a tuple of 2 integers (for a 2-D array) + + .. param: dtype + Type of values in the array + + Return a new array of the given shape with all elements set to 0. + + +.. method:: eye(size, \*, dtype=float) + + Return a new square array of size, with the diagonal elements set to 1 + and the other elements set to 0. + +.. method:: linspace(start, stop, \*, dtype=float, num=50, endpoint=True) + + .. param: start + + First value in the array + + .. param: stop + + Final value in the array + + .. param int: num + + Count of values in the array + + .. param: dtype + + Type of values in the array + + .. param bool: endpoint + + Whether the ``stop`` value is included. Note that even when + endpoint=True, the exact ``stop`` value may not be included due to the + inaccuracy of floating point arithmetic. + + Return a new 1-D array with ``num`` elements ranging from ``start`` to ``stop`` linearly. + + +:mod:`ulab.compare` --- Comparison functions +============================================ + +.. module::ulab.compare + +.. method:: clip(x1, x2, x3) + + Constrain the values from ``x1`` to be between ``x2`` and ``x3``. + ``x2`` is assumed to be less than or equal to ``x3``. + + Arguments may be ulab arrays or numbers. All array arguments + must be the same size. If the inputs are all scalars, a 1-element + array is returned. + + Shorthand for ``ulab.maximum(x2, ulab.minimum(x1, x3))`` + +.. method:: maximum(x1, x2) + + Compute the element by element maximum of the arguments. + + Arguments may be ulab arrays or numbers. All array arguments + must be the same size. If the inputs are both scalars, a number is + returned + +.. method:: minimum(x1, x2) + + Compute the element by element minimum of the arguments. + + Arguments may be ulab arrays or numbers. All array arguments + must be the same size. If the inputs are both scalars, a number is + returned + + +:mod:`ulab.vector` --- Element-by-element functions +=================================================== + +.. module:: ulab.vector + +These functions can operate on numbers, 1-D arrays, or 2-D arrays by +applying the function to every element in the array. This is typically +much more efficient than expressing the same operation as a Python loop. + +.. method:: acos + + Computes the inverse cosine function + +.. method:: acosh + + Computes the inverse hyperbolic cosine function + +.. method:: asin + + Computes the inverse sine function + +.. method:: asinh + + Computes the inverse hyperbolic sine function + +.. method:: around(a, \*, decimals) + + Returns a new float array in which each element is rounded to + ``decimals`` places. + +.. method:: atan + + Computes the inverse tangent function; the return values are in the + range [-pi/2,pi/2]. + +.. method:: atan2(y,x) + + Computes the inverse tangent function of y/x; the return values are in + the range [-pi, pi]. + +.. method:: atanh + + Computes the inverse hyperbolic tangent function + +.. method:: ceil + + Rounds numbers up to the next whole number + +.. method:: cos + + Computes the cosine function + +.. method:: erf + + Computes the error function, which has applications in statistics + +.. method:: erfc + + Computes the complementary error function, which has applications in statistics + +.. method:: exp + + Computes the exponent function. + +.. method:: expm1 + + Computes $e^x-1$. In certain applications, using this function preserves numeric accuracy better than the `exp` function. + +.. method:: floor + + Rounds numbers up to the next whole number + +.. method:: gamma + + Computes the gamma function + +.. method:: lgamma + + Computes the natural log of the gamma function + +.. method:: log + + Computes the natural log + +.. method:: log10 + + Computes the log base 10 + +.. method:: log2 + + Computes the log base 2 + +.. method:: sin + + Computes the sine + +.. method:: sinh + + Computes the hyperbolic sine + +.. method:: sqrt + + Computes the square root + +.. method:: tan + + Computes the tangent + +.. method:: tanh + + Computes the hyperbolic tangent + +:mod:`ulab.linalg` - Linear algebra functions +============================================= + +.. module:: ulab.linalg + +.. method:: cholesky(A) + + :param ~ulab.array A: a positive definite, symmetric square matrix + :return ~ulab.array L: a square root matrix in the lower triangular form + :raises ValueError: If the input does not fulfill the necessary conditions + + The returned matrix satisfies the equation m=LL* + +.. method:: det + + :param: m, a square matrix + :return float: The determinant of the matrix + + Computes the eigenvalues and eigenvectors of a square matrix + +.. method:: dot(m1, m2) + + :param ~ulab.array m1: a matrix + :param ~ulab.array m2: a matrix + + Computes the matrix product of two matrices + + **WARNING:** Unlike ``numpy``, this function cannot be used to compute the dot product of two vectors + +.. method:: eig(m) + + :param m: a square matrix + :return tuple (eigenvectors, eigenvalues): + + Computes the eigenvalues and eigenvectors of a square matrix + +.. method:: inv(m) + + :param ~ulab.array m: a square matrix + :return: The inverse of the matrix, if it exists + :raises ValueError: if the matrix is not invertible + + Computes the inverse of a square matrix + +.. method:: size(array) + + Return the total number of elements in the array, as an integer. + +.. method:: trace(m) + + :param m: a square matrix + + Compute the trace of the matrix, the sum of its diagonal elements. + +:mod:`ulab.filter` --- Filtering functions +========================================== + +.. module:: ulab.filter + +.. method:: convolve(r, c=None) + + :param ulab.array a: + :param ulab.array v: + + Returns the discrete, linear convolution of two one-dimensional sequences. + The result is always an array of float. Only the ``full`` mode is supported, + and the ``mode`` named parameter of numpy is not accepted. Note that all other + modes can be had by slicing a ``full`` result. + + Convolution filters can implement high pass, low pass, band pass, etc., + filtering operations. Convolution filters are typically constructed ahead + of time. This can be done using desktop python with scipy, or on web pages + such as https://fiiir.com/ + + Convolution is most time-efficient when both inputs are of float type. + +:mod:`ulab.fft` --- Frequency-domain functions +============================================== + +.. module:: ulab.fft + +.. method:: fft(r, c=None) + + :param ulab.array r: A 1-dimension array of values whose size is a power of 2 + :param ulab.array c: An optional 1-dimension array of values whose size is a power of 2, giving the complex part of the value + :return tuple (r, c): The real and complex parts of the FFT + + Perform a Fast Fourier Transform from the time domain into the frequency domain + + See also ~ulab.extras.spectrum, which computes the magnitude of the fft, + rather than separately returning its real and imaginary parts. + +.. method:: ifft(r, c=None) + + :param ulab.array r: A 1-dimension array of values whose size is a power of 2 + :param ulab.array c: An optional 1-dimension array of values whose size is a power of 2, giving the complex part of the value + :return tuple (r, c): The real and complex parts of the inverse FFT + + Perform an Inverse Fast Fourier Transform from the frequeny domain into the time domain + +:mod:`ulab.numerical` --- Numerical and Statistical functions +============================================================= + +.. module:: ulab.numerical + +Most of these functions take an "axis" argument, which indicates whether to +operate over the flattened array (None), rows (0), or columns (1). + +.. method:: argmax(array, \*, axis=None) + + Return the index of the maximum element of the 1D array + +.. method:: argmin(array, \*, axis=None) + + Return the index of the minimum element of the 1D array + +.. method:: argsort(array, \*, axis=None) + + Returns an array which gives indices into the input array from least to greatest. + +.. method:: diff(array, \*, axis=1) + + Return the numerical derivative of successive elements of the array, as + an array. axis=None is not supported. + +.. method:: flip(array, \*, axis=None) + + Returns a new array that reverses the order of the elements along the + given axis, or along all axes if axis is None. + +.. method:: max(array, \*, axis=None) + + Return the maximum element of the 1D array + +.. method:: mean(array, \*, axis=None) + + Return the mean element of the 1D array, as a number if axis is None, otherwise as an array. + +.. method:: min(array, \*, axis=None) + + Return the minimum element of the 1D array + +.. method:: roll(array, distance, \*, axis=None) + + Shift the content of a vector by the positions given as the second + argument. If the ``axis`` keyword is supplied, the shift is applied to + the given axis. The array is modified in place. + +.. method:: std(array, \*, axis=None) + + Return the standard deviation of the array, as a number if axis is None, otherwise as an array. + +.. method:: sum(array, \*, axis=None) + + Return the sum of the array, as a number if axis is None, otherwise as an array. + +.. method:: sort(array, \*, axis=0) + + Sort the array along the given axis, or along all axes if axis is None. + The array is modified in place. + +:mod:`ulab.poly` --- Polynomial functions +========================================= + +.. module:: ulab.poly + +.. method:: polyfit([x, ] y, degree) + + Return a polynomial of given degree that approximates the function + f(x)=y. If x is not supplied, it is the range(len(y)). + +.. method:: polyval(p, x) + + Evaluate the polynomial p at the points x. x must be an array. + +:mod:`ulab.extras` --- Additional functions not in numpy +======================================================== + +.. method:: spectrum(r): + + :param ulab.array r: A 1-dimension array of values whose size is a power of 2 + + Computes the spectrum of the input signal. This is the absolute value of the (complex-valued) fft of the signal. + + This function is similar to scipy's ``scipy.signal.spectrogram``. diff --git a/shared-bindings/ulab/__init__.rst b/shared-bindings/ulab/__init__.rst deleted file mode 100644 index d2ff7eb80..000000000 --- a/shared-bindings/ulab/__init__.rst +++ /dev/null @@ -1,523 +0,0 @@ - -:mod:`ulab` --- Manipulate numeric data similar to numpy -======================================================== - -.. module:: ulab - :synopsis: Manipulate numeric data similar to numpy - -`ulab` is a numpy-like module for micropython, meant to simplify and -speed up common mathematical operations on arrays. The primary goal was to -implement a small subset of numpy that might be useful in the context of a -microcontroller. This means low-level data processing of linear (array) and -two-dimensional (matrix) data. - -`ulab` is adapted from micropython-ulab, and the original project's -documentation can be found at -https://micropython-ulab.readthedocs.io/en/latest/ - -`ulab` is modeled after numpy, and aims to be a compatible subset where -possible. Numpy's documentation can be found at -https://docs.scipy.org/doc/numpy/index.html - -.. contents:: - -.. attribute:: __version__ - -The closest corresponding version of micropython-ulab - -ulab.array -- 1- and 2- dimensional array ------------------------------------------ - -.. class:: ulab.array(values, \*, dtype=float) - - :param sequence values: Sequence giving the initial content of the array. - :param dtype: The type of array values, ``int8``, ``uint8``, ``int16``, ``uint16``, or ``float`` - - The `values` sequence can either be another ~ulab.array, sequence of numbers - (in which case a 1-dimensional array is created), or a sequence where each - subsequence has the same length (in which case a 2-dimensional array is - created). - - Passing a ~ulab.array and a different dtype can be used to convert an array - from one dtype to another. - - In many cases, it is more convenient to create an array from a function - like `zeros` or `linspace`. - - `ulab.array` implements the buffer protocol, so it can be used in many - places an `array.array` can be used. - - .. attribute:: shape - - The size of the array, a tuple of length 1 or 2 - - .. attribute:: size - - The number of elements in the array - - .. attribute:: itemsize - - The number of elements in the array - - .. method:: flatten(\*, order='C') - - :param order: Whether to flatten by rows ('C') or columns ('F') - - Returns a new `ulab.array` object which is always 1 dimensional. - If order is 'C' (the default", then the data is ordered in rows; - If it is 'F', then the data is ordered in columns. "C" and "F" refer - to the typical storage organization of the C and Fortran languages. - - .. method:: sort(\*, axis=1) - - :param axis: Whether to sort elements within rows (0), columns (1), or elements (None) - - .. method:: transpose() - - Swap the rows and columns of a 2-dimensional array - - .. method:: __add__() - - Adds corresponding elements of the two arrays, or adds a number to all - elements of the array. If both arguments are arrays, their sizes must match. - - .. method:: __sub__() - - Subtracts corresponding elements of the two arrays, or adds a number to all - elements of the array. If both arguments are arrays, their sizes must match. - - .. method:: __mul__() - - Multiplies corresponding elements of the two arrays, or multiplies - all elements of the array by a number. If both arguments are arrays, - their sizes must match. - - .. method:: __div__() - - Multiplies corresponding elements of the two arrays, or divides - all elements of the array by a number. If both arguments are arrays, - their sizes must match. - - .. method:: __pow__() - - Computes the power (x**y) of corresponding elements of the the two arrays, - or one number and one array. If both arguments are arrays, their sizes - must match. - - .. method:: __getitem__() - - Retrieve an element of the array. - - .. method:: __setitem__() - - Set an element of the array. - -Array type codes ----------------- -.. attribute:: int8 - - Type code for signed integers in the range -128 .. 127 inclusive, like the 'b' typecode of `array.array` - -.. attribute:: int16 - - Type code for signed integers in the range -32768 .. 32767 inclusive, like the 'h' typecode of `array.array` - -.. attribute:: float - - Type code for floating point values, like the 'f' typecode of `array.array` - -.. attribute:: uint8 - - Type code for unsigned integers in the range 0 .. 255 inclusive, like the 'H' typecode of `array.array` - -.. attribute:: uint16 - - Type code for unsigned integers in the range 0 .. 65535 inclusive, like the 'h' typecode of `array.array` - - -Basic Array defining functions ------------------------------- - -.. method:: ones(shape, \*, dtype=float) - - .. param: shape - Shape of the array, either an integer (for a 1-D array) or a tuple of 2 integers (for a 2-D array) - - .. param: dtype - Type of values in the array - - Return a new array of the given shape with all elements set to 1. - -.. method:: zeros - - .. param: shape - Shape of the array, either an integer (for a 1-D array) or a tuple of 2 integers (for a 2-D array) - - .. param: dtype - Type of values in the array - - Return a new array of the given shape with all elements set to 0. - - -.. method:: eye(size, \*, dtype=float) - - Return a new square array of size, with the diagonal elements set to 1 - and the other elements set to 0. - -.. method:: linspace(start, stop, \*, dtype=float, num=50, endpoint=True) - - .. param: start - - First value in the array - - .. param: stop - - Final value in the array - - .. param int: num - - Count of values in the array - - .. param: dtype - - Type of values in the array - - .. param bool: endpoint - - Whether the ``stop`` value is included. Note that even when - endpoint=True, the exact ``stop`` value may not be included due to the - inaccuracy of floating point arithmetic. - - Return a new 1-D array with ``num`` elements ranging from ``start`` to ``stop`` linearly. - - -:mod:`ulab.compare` --- Comparison functions -============================================ - -.. module::ulab.compare - -.. method:: clip(x1, x2, x3) - - Constrain the values from ``x1`` to be between ``x2`` and ``x3``. - ``x2`` is assumed to be less than or equal to ``x3``. - - Arguments may be ulab arrays or numbers. All array arguments - must be the same size. If the inputs are all scalars, a 1-element - array is returned. - - Shorthand for ``ulab.maximum(x2, ulab.minimum(x1, x3))`` - -.. method:: maximum(x1, x2) - - Compute the element by element maximum of the arguments. - - Arguments may be ulab arrays or numbers. All array arguments - must be the same size. If the inputs are both scalars, a number is - returned - -.. method:: minimum(x1, x2) - - Compute the element by element minimum of the arguments. - - Arguments may be ulab arrays or numbers. All array arguments - must be the same size. If the inputs are both scalars, a number is - returned - - -:mod:`ulab.vector` --- Element-by-element functions -=================================================== - -.. module:: ulab.vector - -These functions can operate on numbers, 1-D arrays, or 2-D arrays by -applying the function to every element in the array. This is typically -much more efficient than expressing the same operation as a Python loop. - -.. method:: acos - - Computes the inverse cosine function - -.. method:: acosh - - Computes the inverse hyperbolic cosine function - -.. method:: asin - - Computes the inverse sine function - -.. method:: asinh - - Computes the inverse hyperbolic sine function - -.. method:: around(a, \*, decimals) - - Returns a new float array in which each element is rounded to - ``decimals`` places. - -.. method:: atan - - Computes the inverse tangent function; the return values are in the - range [-pi/2,pi/2]. - -.. method:: atan2(y,x) - - Computes the inverse tangent function of y/x; the return values are in - the range [-pi, pi]. - -.. method:: atanh - - Computes the inverse hyperbolic tangent function - -.. method:: ceil - - Rounds numbers up to the next whole number - -.. method:: cos - - Computes the cosine function - -.. method:: erf - - Computes the error function, which has applications in statistics - -.. method:: erfc - - Computes the complementary error function, which has applications in statistics - -.. method:: exp - - Computes the exponent function. - -.. method:: expm1 - - Computes $e^x-1$. In certain applications, using this function preserves numeric accuracy better than the `exp` function. - -.. method:: floor - - Rounds numbers up to the next whole number - -.. method:: gamma - - Computes the gamma function - -.. method:: lgamma - - Computes the natural log of the gamma function - -.. method:: log - - Computes the natural log - -.. method:: log10 - - Computes the log base 10 - -.. method:: log2 - - Computes the log base 2 - -.. method:: sin - - Computes the sine - -.. method:: sinh - - Computes the hyperbolic sine - -.. method:: sqrt - - Computes the square root - -.. method:: tan - - Computes the tangent - -.. method:: tanh - - Computes the hyperbolic tangent - -:mod:`ulab.linalg` - Linear algebra functions -============================================= - -.. module:: ulab.linalg - -.. method:: cholesky(A) - - :param ~ulab.array A: a positive definite, symmetric square matrix - :return ~ulab.array L: a square root matrix in the lower triangular form - :raises ValueError: If the input does not fulfill the necessary conditions - - The returned matrix satisfies the equation m=LL* - -.. method:: det - - :param: m, a square matrix - :return float: The determinant of the matrix - - Computes the eigenvalues and eigenvectors of a square matrix - -.. method:: dot(m1, m2) - - :param ~ulab.array m1: a matrix - :param ~ulab.array m2: a matrix - - Computes the matrix product of two matrices - - **WARNING:** Unlike ``numpy``, this function cannot be used to compute the dot product of two vectors - -.. method:: eig(m) - - :param m: a square matrix - :return tuple (eigenvectors, eigenvalues): - - Computes the eigenvalues and eigenvectors of a square matrix - -.. method:: inv(m) - - :param ~ulab.array m: a square matrix - :return: The inverse of the matrix, if it exists - :raises ValueError: if the matrix is not invertible - - Computes the inverse of a square matrix - -.. method:: size(array) - - Return the total number of elements in the array, as an integer. - -.. method:: trace(m) - - :param m: a square matrix - - Compute the trace of the matrix, the sum of its diagonal elements. - -:mod:`ulab.filter` --- Filtering functions -========================================== - -.. module:: ulab.filter - -.. method:: convolve(r, c=None) - - :param ulab.array a: - :param ulab.array v: - - Returns the discrete, linear convolution of two one-dimensional sequences. - The result is always an array of float. Only the ``full`` mode is supported, - and the ``mode`` named parameter of numpy is not accepted. Note that all other - modes can be had by slicing a ``full`` result. - - Convolution filters can implement high pass, low pass, band pass, etc., - filtering operations. Convolution filters are typically constructed ahead - of time. This can be done using desktop python with scipy, or on web pages - such as https://fiiir.com/ - - Convolution is most time-efficient when both inputs are of float type. - -:mod:`ulab.fft` --- Frequency-domain functions -============================================== - -.. module:: ulab.fft - -.. method:: fft(r, c=None) - - :param ulab.array r: A 1-dimension array of values whose size is a power of 2 - :param ulab.array c: An optional 1-dimension array of values whose size is a power of 2, giving the complex part of the value - :return tuple (r, c): The real and complex parts of the FFT - - Perform a Fast Fourier Transform from the time domain into the frequency domain - - See also ~ulab.extras.spectrum, which computes the magnitude of the fft, - rather than separately returning its real and imaginary parts. - -.. method:: ifft(r, c=None) - - :param ulab.array r: A 1-dimension array of values whose size is a power of 2 - :param ulab.array c: An optional 1-dimension array of values whose size is a power of 2, giving the complex part of the value - :return tuple (r, c): The real and complex parts of the inverse FFT - - Perform an Inverse Fast Fourier Transform from the frequeny domain into the time domain - -:mod:`ulab.numerical` --- Numerical and Statistical functions -============================================================= - -.. module:: ulab.numerical - -Most of these functions take an "axis" argument, which indicates whether to -operate over the flattened array (None), rows (0), or columns (1). - -.. method:: argmax(array, \*, axis=None) - - Return the index of the maximum element of the 1D array - -.. method:: argmin(array, \*, axis=None) - - Return the index of the minimum element of the 1D array - -.. method:: argsort(array, \*, axis=None) - - Returns an array which gives indices into the input array from least to greatest. - -.. method:: diff(array, \*, axis=1) - - Return the numerical derivative of successive elements of the array, as - an array. axis=None is not supported. - -.. method:: flip(array, \*, axis=None) - - Returns a new array that reverses the order of the elements along the - given axis, or along all axes if axis is None. - -.. method:: max(array, \*, axis=None) - - Return the maximum element of the 1D array - -.. method:: mean(array, \*, axis=None) - - Return the mean element of the 1D array, as a number if axis is None, otherwise as an array. - -.. method:: min(array, \*, axis=None) - - Return the minimum element of the 1D array - -.. method:: roll(array, distance, \*, axis=None) - - Shift the content of a vector by the positions given as the second - argument. If the ``axis`` keyword is supplied, the shift is applied to - the given axis. The array is modified in place. - -.. method:: std(array, \*, axis=None) - - Return the standard deviation of the array, as a number if axis is None, otherwise as an array. - -.. method:: sum(array, \*, axis=None) - - Return the sum of the array, as a number if axis is None, otherwise as an array. - -.. method:: sort(array, \*, axis=0) - - Sort the array along the given axis, or along all axes if axis is None. - The array is modified in place. - -:mod:`ulab.poly` --- Polynomial functions -========================================= - -.. module:: ulab.poly - -.. method:: polyfit([x, ] y, degree) - - Return a polynomial of given degree that approximates the function - f(x)=y. If x is not supplied, it is the range(len(y)). - -.. method:: polyval(p, x) - - Evaluate the polynomial p at the points x. x must be an array. - -:mod:`ulab.extras` --- Additional functions not in numpy -======================================================== - -.. method:: spectrum(r): - - :param ulab.array r: A 1-dimension array of values whose size is a power of 2 - - Computes the spectrum of the input signal. This is the absolute value of the (complex-valued) fft of the signal. - - This function is similar to scipy's ``scipy.signal.spectrogram``. diff --git a/shared-bindings/usb_hid/Device.c b/shared-bindings/usb_hid/Device.c index bcea5b2c5..8c0c364ff 100644 --- a/shared-bindings/usb_hid/Device.c +++ b/shared-bindings/usb_hid/Device.c @@ -28,10 +28,7 @@ #include "shared-bindings/usb_hid/Device.h" //| class Device: -//| """.. currentmodule:: usb_hid -//| -//| :class:`Device` -- HID Device -//| ============================================ +//| """HID Device //| //| Usage:: //| diff --git a/shared-bindings/usb_hid/__init__.c b/shared-bindings/usb_hid/__init__.c index 3d0978d62..e12ea8da4 100644 --- a/shared-bindings/usb_hid/__init__.c +++ b/shared-bindings/usb_hid/__init__.c @@ -31,12 +31,7 @@ #include "shared-bindings/usb_hid/__init__.h" #include "shared-bindings/usb_hid/Device.h" -//| """:mod:`usb_hid` --- USB Human Interface Device -//| =========================================================== -//| -//| .. module:: usb_hid -//| :synopsis: USB Human Interface Device -//| :platform: SAMD21 +//| """USB Human Interface Device //| //| The `usb_hid` module allows you to output data as a HID device.""" //| @@ -44,14 +39,6 @@ //| usb_hid.devices: Any = ... //| """Tuple of all active HID device interfaces.""" //| - -//| """Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Device""" -//| STATIC const mp_rom_map_elem_t usb_hid_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_OBJ_NEW_QSTR(MP_QSTR_usb_hid) }, { MP_ROM_QSTR(MP_QSTR_devices), MP_ROM_PTR(&common_hal_usb_hid_devices) }, diff --git a/shared-bindings/usb_midi/PortIn.c b/shared-bindings/usb_midi/PortIn.c index 55a5865ca..9d9310b47 100644 --- a/shared-bindings/usb_midi/PortIn.c +++ b/shared-bindings/usb_midi/PortIn.c @@ -36,12 +36,9 @@ #include "supervisor/shared/translate.h" //| class PortIn: -//| """.. currentmodule:: usb_midi +//| """Receives midi commands over USB""" //| -//| :class:`PortIn` -- receives midi commands over USB -//| ===================================================""" -//| -//| def __init__(self, ): +//| def __init__(self): //| """You cannot create an instance of `usb_midi.PortIn`. //| //| PortIn objects are constructed for every corresponding entry in the USB diff --git a/shared-bindings/usb_midi/PortOut.c b/shared-bindings/usb_midi/PortOut.c index d83eb53b6..14ed0e767 100644 --- a/shared-bindings/usb_midi/PortOut.c +++ b/shared-bindings/usb_midi/PortOut.c @@ -36,10 +36,7 @@ #include "supervisor/shared/translate.h" //| class PortOut: -//| """.. currentmodule:: usb_midi -//| -//| :class:`PortOut` -- sends midi messages to a computer over USB -//| ==============================================================""" +//| """Sends midi messages to a computer over USB""" //| //| def __init__(self, ): //| """You cannot create an instance of `usb_midi.PortOut`. diff --git a/shared-bindings/usb_midi/__init__.c b/shared-bindings/usb_midi/__init__.c index 2631d8a88..5570b601c 100644 --- a/shared-bindings/usb_midi/__init__.c +++ b/shared-bindings/usb_midi/__init__.c @@ -35,22 +35,7 @@ #include "py/runtime.h" -//| """:mod:`usb_midi` --- MIDI over USB -//| ================================================= -//| -//| .. module:: usb_midi -//| :synopsis: MIDI over USB -//| -//| The `usb_midi` module contains classes to transmit and receive MIDI messages over USB -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| PortIn -//| PortOut""" -//| +//| """Classes to transmit and receive MIDI messages over USB""" //| mp_map_elem_t usb_midi_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_usb_midi) }, diff --git a/shared-bindings/ustack/__init__.c b/shared-bindings/ustack/__init__.c index 073840aba..e5fac6941 100644 --- a/shared-bindings/ustack/__init__.c +++ b/shared-bindings/ustack/__init__.c @@ -34,15 +34,11 @@ -//| """:mod:`ustack` --- Stack information and analysis -//| ======================================================== -//| -//| .. module:: ustack -//| :synopsis: stack information functions""" +//| """Stack information and analysis""" //| #if MICROPY_MAX_STACK_USAGE -//| def max_stack_usage() -> Any: +//| def max_stack_usage() -> int: //| """Return the maximum excursion of the stack so far.""" //| ... //| @@ -53,7 +49,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_0(max_stack_usage_obj, max_stack_usage); #endif // MICROPY_MAX_STACK_USAGE -//| def stack_size() -> Any: +//| def stack_size() -> int: //| """Return the size of the entire stack. //| Same as in micropython.mem_info(), but returns a value instead //| of just printing it.""" diff --git a/shared-bindings/wiznet/__init__.c b/shared-bindings/wiznet/__init__.c index 5c8e8d3fd..0b0b7b14b 100644 --- a/shared-bindings/wiznet/__init__.c +++ b/shared-bindings/wiznet/__init__.c @@ -35,21 +35,7 @@ #include "shared-module/network/__init__.h" -//| """:mod:`wiznet` --- Support for WizNet hardware -//| ============================================= -//| -//| .. module:: wiznet -//| :synopsis: Support for WizNet hardware -//| :platform: SAMD -//| -//| Support for WizNet hardware, including the WizNet 5500 Ethernet adaptor. -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| wiznet5k""" +//| """Support for WizNet hardware, including the WizNet 5500 Ethernet adaptor.""" //| extern const mod_network_nic_type_t mod_network_nic_type_wiznet5k; diff --git a/shared-bindings/wiznet/wiznet5k.c b/shared-bindings/wiznet/wiznet5k.c index 2e2ee3949..2f49dffea 100644 --- a/shared-bindings/wiznet/wiznet5k.c +++ b/shared-bindings/wiznet/wiznet5k.c @@ -47,10 +47,7 @@ #include "shared-module/wiznet/wiznet5k.h" //| class WIZNET5K: -//| """.. currentmodule:: wiznet -//| -//| :class:`WIZNET5K` -- wrapper for Wiznet 5500 Ethernet interface -//| ===============================================================""" +//| """Wrapper for Wiznet 5500 Ethernet interface""" //| //| def __init__(self, spi: busio.SPI, cs: microcontroller.Pin, rst: microcontroller.Pin, dhcp: bool = True): //| """Create a new WIZNET5500 interface using the specified pins diff --git a/tools/extract_pyi.py b/tools/extract_pyi.py index de783eb27..95370f761 100644 --- a/tools/extract_pyi.py +++ b/tools/extract_pyi.py @@ -22,7 +22,7 @@ for module in modules: pyi_lines = [] classes = os.listdir(module_path) classes = [x for x in sorted(classes) if x.endswith(".c")] - if classes[-1] == "__init__.c": + if classes and classes[-1] == "__init__.c": classes.insert(0, classes.pop()) for class_file in classes: class_path = os.path.join(module_path, class_file) @@ -37,6 +37,13 @@ for module in modules: continue pyi_lines.append(line) + raw_stubs = [x for x in sorted(classes) if x.endswith(".pyi")] + if raw_stubs and raw_stubs[-1] == "__init__.pyi": + raw_stubs.insert(0, raw_stubs.pop()) + for raw_stub in raw_stubs: + raw_stub_path = os.path.join(module_path, raw_stub) + with open(raw_stub_path, "r") as f: + pyi_lines.extend(f.readlines()) stub_filename = os.path.join(stub_directory, module + ".pyi") print(stub_filename) stub_contents = "".join(pyi_lines) @@ -54,3 +61,6 @@ for module in modules: print() print(f"{ok} ok out of {total}") + +if ok != total: + sys.exit(total - ok) -- cgit v1.2.3 From c816cfed58a6f875f91a3bb8629dd81acf076882 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Tue, 12 May 2020 17:37:42 -0700 Subject: Build stubs before docs --- .github/workflows/build.yml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 057395eee..7ecdb66ee 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -34,7 +34,7 @@ jobs: run: | sudo apt-get install -y eatmydata sudo eatmydata apt-get install -y gettext librsvg2-bin mingw-w64 - pip install requests sh click setuptools cpp-coveralls "Sphinx<4" sphinx-rtd-theme recommonmark sphinx-autoapi sphinxcontrib-svg2pdfconverter polib pyyaml + pip install requests sh click setuptools cpp-coveralls "Sphinx<4" sphinx-rtd-theme recommonmark sphinx-autoapi sphinxcontrib-svg2pdfconverter polib pyyaml astroid - name: Versions run: | gcc --version @@ -64,6 +64,8 @@ jobs: - name: mpy Tests run: MICROPY_CPYTHON3=python3.8 MICROPY_MICROPYTHON=../ports/unix/micropython_coverage ./run-tests -j1 --via-mpy -d basics float working-directory: tests + - name: Stubs + run: make stubs -j2 - name: Docs run: sphinx-build -E -W -b html . _build/html - name: Translations -- cgit v1.2.3 From 4e646ee6e4473195df3eba4bd7e006e44bfd1cdc Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Tue, 12 May 2020 18:40:02 -0700 Subject: Move vectorio to stubs --- shared-bindings/vectorio/Circle.c | 18 ++++++------------ shared-bindings/vectorio/Polygon.c | 23 ++++++++--------------- shared-bindings/vectorio/Rectangle.c | 14 +++++--------- shared-bindings/vectorio/VectorShape.c | 33 ++++++++++++++------------------- shared-bindings/vectorio/__init__.c | 21 +-------------------- 5 files changed, 34 insertions(+), 75 deletions(-) diff --git a/shared-bindings/vectorio/Circle.c b/shared-bindings/vectorio/Circle.c index 260e80d0f..6b5682e14 100644 --- a/shared-bindings/vectorio/Circle.c +++ b/shared-bindings/vectorio/Circle.c @@ -9,17 +9,12 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" - -//| .. currentmodule:: vectorio -//| -//| :class:`Circle` -- Represents a circle by its radius -//| ========================================================================== +//| class Circle: //| -//| .. class:: Circle(radius) +//| def __init__(self, radius: int): +//| """Circle is positioned on screen by its center point. //| -//| Circle is positioned on screen by its center point. -//| -//| :param int radius: The radius of the circle in pixels +//| :param radius: The radius of the circle in pixels""" //| static mp_obj_t vectorio_circle_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_radius }; @@ -42,9 +37,8 @@ static mp_obj_t vectorio_circle_make_new(const mp_obj_type_t *type, size_t n_arg } -//| .. attribute:: radius -//| -//| The radius of the circle in pixels. +//| radius : int = ... +//| """The radius of the circle in pixels.""" //| STATIC mp_obj_t vectorio_circle_obj_get_radius(mp_obj_t self_in) { vectorio_circle_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/vectorio/Polygon.c b/shared-bindings/vectorio/Polygon.c index b8bb377ac..5f4d85e21 100644 --- a/shared-bindings/vectorio/Polygon.c +++ b/shared-bindings/vectorio/Polygon.c @@ -49,17 +49,13 @@ static mp_obj_t _to_points_list(mp_obj_t points_tuple_list) { } return points_list; } - - - -//| .. currentmodule:: vectorio -//| -//| :class:`Polygon` -- Represents a closed shape by ordered vertices -//| ========================================================================== +//| from typing import List, Tuple //| -//| .. class:: Polygon( List[ Tuple[ x, y ], ... ] ) +//| class Polygon: +//| def __init__(self, points: List[ Tuple[ x, y ], ... ] ): +//| """Represents a closed shape by ordered vertices //| -//| :param [Point] points_array: Vertices for the polygon +//| :param points: Vertices for the polygon""" //| static mp_obj_t vectorio_polygon_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_points_list }; @@ -83,14 +79,13 @@ static mp_obj_t vectorio_polygon_make_new(const mp_obj_type_t *type, size_t n_ar } -//| .. attribute:: points -//| -//| Set a new look and shape for this polygon +//| points: List[ Tuple[ x, y ], ... ] = ... +//| """Set a new look and shape for this polygon""" //| STATIC mp_obj_t vectorio_polygon_obj_get_points(mp_obj_t self_in) { vectorio_polygon_t *self = MP_OBJ_TO_PTR(self_in); mp_obj_t list = mp_obj_new_list(0, NULL); - + size_t len = 0; mp_obj_t *items; mp_obj_list_get(common_hal_vectorio_polygon_get_points(self), &len, &items); @@ -123,8 +118,6 @@ const mp_obj_property_t vectorio_polygon_points_obj = { (mp_obj_t)&mp_const_none_obj}, }; - - STATIC const mp_rom_map_elem_t vectorio_polygon_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_points), MP_ROM_PTR(&vectorio_polygon_points_obj) }, }; diff --git a/shared-bindings/vectorio/Rectangle.c b/shared-bindings/vectorio/Rectangle.c index ea468f788..f04a25c35 100644 --- a/shared-bindings/vectorio/Rectangle.c +++ b/shared-bindings/vectorio/Rectangle.c @@ -7,16 +7,12 @@ #include "py/runtime.h" #include "supervisor/shared/translate.h" - -//| .. currentmodule:: vectorio -//| -//| :class:`Rectangle` -- Represents a rectangle by defining its bounds -//| ========================================================================== -//| -//| .. class:: Rectangle(width, height) +//| class Rectangle: +//| def __init__(self, width: int, height: int): +//| """Represents a rectangle by defining its bounds //| -//| :param int width: The number of pixels wide -//| :param int height: The number of pixels high +//| :param width: The number of pixels wide +//| :param height: The number of pixels high""" //| static mp_obj_t vectorio_rectangle_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_width, ARG_height }; diff --git a/shared-bindings/vectorio/VectorShape.c b/shared-bindings/vectorio/VectorShape.c index 4b39ec996..c512bcd54 100644 --- a/shared-bindings/vectorio/VectorShape.c +++ b/shared-bindings/vectorio/VectorShape.c @@ -19,17 +19,15 @@ #include "supervisor/shared/translate.h" -//| .. currentmodule:: vectorio +//| class VectorShape: +//| def __init__(self, shape: vectorio.Polygon, pixel_shader: displayio.Palette, x: int=0, y: int=0): +//| """Binds a vector shape to a location and pixel color //| -//| :class:`VectorShape` -- Binds a vector shape to a location and pixel color -//| ========================================================================== -//| -//| .. class:: VectorShape( shape, pixel_shader, x=0, y=0) -//| -//| :param vectorio.Polygon shape: The shape to draw. -//| :param displayio.Palette pixel_shader: The pixel shader that produces colors from values -//| :param int x: Initial x position of the center axis of the shape within the parent. -//| :param int y: Initial y position of the center axis of the shape within the parent. +//| :param shape: The shape to draw. +//| :param pixel_shader: The pixel shader that produces colors from values +//| :param x: Initial x position of the center axis of the shape within the parent. +//| :param y: Initial y position of the center axis of the shape within the parent.""" +//| ... //| STATIC mp_obj_t vectorio_vector_shape_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_shape, ARG_pixel_shader, ARG_x, ARG_y }; @@ -95,9 +93,8 @@ STATIC mp_obj_t vectorio_vector_shape_make_new(const mp_obj_type_t *type, size_t } -//| .. attribute:: x -//| -//| X position of the center point of the shape in the parent. +//| x: int = ... +//| """X position of the center point of the shape in the parent.""" //| STATIC mp_obj_t vectorio_vector_shape_obj_get_x(mp_obj_t self_in) { vectorio_vector_shape_t *self = MP_OBJ_TO_PTR(self_in); @@ -122,9 +119,8 @@ const mp_obj_property_t vectorio_vector_shape_x_obj = { }; -//| .. attribute:: y -//| -//| Y position of the center point of the shape in the parent. +//| y: int = ... +//| """Y position of the center point of the shape in the parent.""" //| STATIC mp_obj_t vectorio_vector_shape_obj_get_y(mp_obj_t self_in) { vectorio_vector_shape_t *self = MP_OBJ_TO_PTR(self_in); @@ -149,9 +145,8 @@ const mp_obj_property_t vectorio_vector_shape_y_obj = { }; -//| .. attribute:: pixel_shader -//| -//| The pixel shader of the shape. +//| pixel_shader: displayio.Palette = ... +//| """The pixel shader of the shape.""" //| STATIC mp_obj_t vectorio_vector_shape_obj_get_pixel_shader(mp_obj_t self_in) { vectorio_vector_shape_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/vectorio/__init__.c b/shared-bindings/vectorio/__init__.c index b9e3828bd..c74783426 100644 --- a/shared-bindings/vectorio/__init__.c +++ b/shared-bindings/vectorio/__init__.c @@ -8,27 +8,8 @@ #include "shared-bindings/vectorio/Rectangle.h" #include "shared-bindings/vectorio/VectorShape.h" -//| :mod:`vectorio` --- Lightweight 2d shapes for displays -//| ========================================================================= +//| """Lightweight 2d shapes for displays""" //| -//| .. module:: vectorio -//| :synopsis: Adds vector graphics to displayio -//| :platform: SAMD21, SAMD51, nRF52 -//| -//| The `vectorio` module contains classes to construct shapes -//| by describing their points rather than providing them in bitmaps. -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Circle -//| Polygon -//| Rectangle -//| VectorShape -//| - STATIC const mp_rom_map_elem_t vectorio_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_vectorio) }, -- cgit v1.2.3 From 2efe17bcb76197137287ae4a984b4481ab77be15 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Tue, 12 May 2020 19:01:17 -0700 Subject: Don't build in empty help.c --- py/circuitpy_defns.mk | 1 - 1 file changed, 1 deletion(-) diff --git a/py/circuitpy_defns.mk b/py/circuitpy_defns.mk index c6ea2b45b..9913329c2 100644 --- a/py/circuitpy_defns.mk +++ b/py/circuitpy_defns.mk @@ -318,7 +318,6 @@ $(filter $(SRC_PATTERNS), \ ) SRC_BINDINGS_ENUMS += \ - help.c \ util.c SRC_SHARED_MODULE_ALL = \ -- cgit v1.2.3 From 3ffa5604fc0523aa131be4a353fb883a9c8a37ff Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Wed, 13 May 2020 08:36:16 -0700 Subject: Update countio to python stub docs --- shared-bindings/busio/UART.c | 10 +++--- shared-bindings/countio/Counter.c | 70 +++++++++++++++++--------------------- shared-bindings/countio/__init__.c | 16 ++------- 3 files changed, 38 insertions(+), 58 deletions(-) diff --git a/shared-bindings/busio/UART.c b/shared-bindings/busio/UART.c index d4642225c..2bd36145d 100644 --- a/shared-bindings/busio/UART.c +++ b/shared-bindings/busio/UART.c @@ -346,13 +346,11 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_reset_input_buffer_obj, busio_uart_o //| class Parity: //| """Enum-like class to define the parity used to verify correct data transfer.""" //| -//| def __init__(self, ): -//| ODD: Any = ... -//| """Total number of ones should be odd.""" +//| ODD: Any = ... +//| """Total number of ones should be odd.""" //| -//| EVEN: Any = ... -//| """Total number of ones should be even.""" -//| ... +//| EVEN: Any = ... +//| """Total number of ones should be even.""" //| const mp_obj_type_t busio_uart_parity_type; diff --git a/shared-bindings/countio/Counter.c b/shared-bindings/countio/Counter.c index d9d97f0ea..8db795015 100644 --- a/shared-bindings/countio/Counter.c +++ b/shared-bindings/countio/Counter.c @@ -9,45 +9,41 @@ #include "shared-bindings/countio/Counter.h" #include "shared-bindings/util.h" -//| .. currentmodule:: countio +//| class Counter: +//| """Counter will keep track of the number of falling edge transistions (pulses) on a +//| given pin""" //| -//| :class:`Counter` -- Track the count of falling edge transistions (pulses) on a given pin -//| ======================================================================================== +//| def __init__(self, pin_a): +//| """Create a Counter object associated with the given pin. It tracks the number of +//| falling pulses relative when the object is constructed. //| -//| Counter will keep track of the number of falling edge transistions (pulses) on a given pin +//| :param ~microcontroller.Pin pin_a: Pin to read pulses from. //| -//| .. class:: Counter(pin_a) //| -//| Create a Counter object associated with the given pin. It tracks the number of -//| falling pulses relative when the object is constructed. +//| For example:: //| -//| :param ~microcontroller.Pin pin_a: Pin to read pulses from. -//| +//| import countio +//| import time +//| from board import * //| -//| For example:: -//| -//| import countio -//| import time -//| from board import * -//| -//| pin_counter = countio.Counter(board.D1) -//| #reset the count after 100 counts -//| while True: -//| if pin_counter.count == 100: -//| pin_counter.reset() -//| print(pin_counter.count) +//| pin_counter = countio.Counter(board.D1) +//| #reset the count after 100 counts +//| while True: +//| if pin_counter.count == 100: +//| pin_counter.reset() +//| print(pin_counter.count)""" //| STATIC mp_obj_t countio_counter_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_pin_a }; static const mp_arg_t allowed_args[] = { { MP_QSTR_pin_a, MP_ARG_REQUIRED | MP_ARG_OBJ } - + }; mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); const mcu_pin_obj_t* pin_a = validate_obj_is_free_pin(args[ARG_pin_a].u_obj); - + countio_counter_obj_t *self = m_new_obj(countio_counter_obj_t); self->base.type = &countio_counter_type; @@ -57,9 +53,8 @@ STATIC mp_obj_t countio_counter_make_new(const mp_obj_type_t *type, size_t n_arg return MP_OBJ_FROM_PTR(self); } -//| .. method:: deinit() -//| -//| Deinitializes the Counter and releases any hardware resources for reuse. +//| def deinit(self): +//| """Deinitializes the Counter and releases any hardware resources for reuse.""" //| STATIC mp_obj_t countio_counter_deinit(mp_obj_t self_in) { countio_counter_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -74,16 +69,14 @@ STATIC void check_for_deinit(countio_counter_obj_t *self) { } } -//| .. method:: __enter__() -//| -//| No-op used by Context Managers. +//| def __enter__(self): +//| """No-op used by Context Managers.""" //| // Provided by context manager helper. -//| .. method:: __exit__() -//| -//| Automatically deinitializes the hardware when exiting a context. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| def __exit__(self): +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" //| STATIC mp_obj_t countio_counter_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; @@ -93,10 +86,8 @@ STATIC mp_obj_t countio_counter_obj___exit__(size_t n_args, const mp_obj_t *args STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(countio_counter___exit___obj, 4, 4, countio_counter_obj___exit__); -//| .. attribute:: count -//| -//| The current count in terms of pulses. -//| +//| count: int = ... +//| """The current count in terms of pulses.""" //| STATIC mp_obj_t countio_counter_obj_get_count(mp_obj_t self_in) { countio_counter_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -122,6 +113,9 @@ const mp_obj_property_t countio_counter_count_obj = { (mp_obj_t)&mp_const_none_obj}, }; +//| def reset(self): +//| """Resets the count back to 0.""" +//| STATIC mp_obj_t countio_counter_reset(mp_obj_t self_in){ countio_counter_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); @@ -129,7 +123,7 @@ STATIC mp_obj_t countio_counter_reset(mp_obj_t self_in){ common_hal_countio_counter_reset(self); return mp_const_none; } - + MP_DEFINE_CONST_FUN_OBJ_1(countio_counter_reset_obj, countio_counter_reset); diff --git a/shared-bindings/countio/__init__.c b/shared-bindings/countio/__init__.c index 8929bf7ed..7046a5e72 100644 --- a/shared-bindings/countio/__init__.c +++ b/shared-bindings/countio/__init__.c @@ -8,22 +8,10 @@ #include "shared-bindings/countio/__init__.h" #include "shared-bindings/countio/Counter.h" -//| :mod:`countio` --- Support for edge counting -//| ======================================================== -//| -//| .. module:: countio -//| :synopsis: Support for edge counting -//| :platform: SAMD +//| """Support for edge counting //| //| The `countio` module contains logic to read and count edge transistions //| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| Counter -//| //| .. warning:: This module is not available in some SAMD21 (aka M0) builds. See the //| :ref:`module-support-matrix` for more info. @@ -32,7 +20,7 @@ //| All classes change hardware state and should be deinitialized when they //| are no longer needed if the program continues after use. To do so, either //| call :py:meth:`!deinit` or use a context manager. See -//| :ref:`lifetime-and-contextmanagers` for more info. +//| :ref:`lifetime-and-contextmanagers` for more info.""" //| STATIC const mp_rom_map_elem_t countio_module_globals_table[] = { -- cgit v1.2.3 From 794d5f5900410730b84a1ab47c2c286b954b5c0a Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Wed, 13 May 2020 14:45:09 -0700 Subject: Correct version numbering --- setup.py | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/setup.py b/setup.py index 37afb6f1b..769bc66e1 100644 --- a/setup.py +++ b/setup.py @@ -1,20 +1,36 @@ from datetime import datetime from setuptools import setup from pathlib import Path +import subprocess +import re stub_root = Path("circuitpython-stubs") stubs = [p.relative_to(stub_root).as_posix() for p in stub_root.glob("*.pyi")] +git_out = subprocess.check_output(["git", "describe", "--tags"]) +version = git_out.strip().decode("utf-8") + +# Detect a development build and mutate it to be valid semver and valid python version. +pieces = version.split("-") +if len(pieces) > 2: + # Merge the commit portion onto the commit count since the tag. + pieces[-2] += "+" + pieces[-1] + pieces.pop() + # Merge the commit count and build to the pre-release identifier. + pieces[-2] += ".dev." + pieces[-1] + pieces.pop() +version = "-".join(pieces) + setup( name="circuitpython-stubs", description="PEP 561 type stubs for CircuitPython", url="https://github.com/adafruit/circuitpython", maintainer="CircuitPythonistas", + maintainer_email="circuitpython@adafruit.com", author_email="circuitpython@adafruit.com", - use_scm_version=True, + version=version, license="MIT", package_data={"circuitpython-stubs": stubs}, packages=["circuitpython-stubs"], - setup_requires=["setuptools>=38.6.0", - "setuptools_scm"], + setup_requires=["setuptools>=38.6.0"], ) -- cgit v1.2.3 From b477c4812d1f0d0ed0fe56abcdcaa356cc3a652e Mon Sep 17 00:00:00 2001 From: dherrada Date: Thu, 14 May 2020 16:58:25 -0400 Subject: Fixed minor indentation issue --- shared-bindings/analogio/AnalogIn.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/shared-bindings/analogio/AnalogIn.c b/shared-bindings/analogio/AnalogIn.c index bafa287ff..400784b39 100644 --- a/shared-bindings/analogio/AnalogIn.c +++ b/shared-bindings/analogio/AnalogIn.c @@ -70,9 +70,9 @@ STATIC mp_obj_t analogio_analogin_make_new(const mp_obj_type_t *type, return MP_OBJ_FROM_PTR(self); } -//| def deinit(self, ) -> Any: -//| """Turn off the AnalogIn and release the pin for other use.""" -//| ... +//| def deinit(self, ) -> Any: +//| """Turn off the AnalogIn and release the pin for other use.""" +//| ... //| STATIC mp_obj_t analogio_analogin_deinit(mp_obj_t self_in) { analogio_analogin_obj_t *self = MP_OBJ_TO_PTR(self_in); -- cgit v1.2.3 From afc84c2fd115aa1c7a80bd5d83834c30c4563a6c Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Thu, 14 May 2020 15:57:35 -0700 Subject: Fix ulab, math and template. --- .gitignore | 2 +- Makefile | 9 +- conf.py | 6 +- docs/autoapi/templates/python/module.rst | 93 +++++ shared-bindings/math/__init__.c | 324 ++++++++-------- shared-bindings/ulab/__init__.pyi | 564 ++++++---------------------- shared-bindings/ulab/compare/__init__.pyi | 30 ++ shared-bindings/ulab/extras/__init__.pyi | 10 + shared-bindings/ulab/fft/__init__.pyi | 22 ++ shared-bindings/ulab/filter/__init__.pyi | 19 + shared-bindings/ulab/linalg/__init__.pyi | 57 +++ shared-bindings/ulab/numerical/__init__.pyi | 57 +++ shared-bindings/ulab/poly/__init__.pyi | 10 + shared-bindings/ulab/vector/__init__.pyi | 108 ++++++ tools/extract_pyi.py | 77 ++-- 15 files changed, 719 insertions(+), 669 deletions(-) create mode 100644 docs/autoapi/templates/python/module.rst create mode 100644 shared-bindings/ulab/compare/__init__.pyi create mode 100644 shared-bindings/ulab/extras/__init__.pyi create mode 100644 shared-bindings/ulab/fft/__init__.pyi create mode 100644 shared-bindings/ulab/filter/__init__.pyi create mode 100644 shared-bindings/ulab/linalg/__init__.pyi create mode 100644 shared-bindings/ulab/numerical/__init__.pyi create mode 100644 shared-bindings/ulab/poly/__init__.pyi create mode 100644 shared-bindings/ulab/vector/__init__.pyi diff --git a/.gitignore b/.gitignore index 403fcc299..f5edb89f0 100644 --- a/.gitignore +++ b/.gitignore @@ -52,7 +52,7 @@ _build # Generated rst files ###################### genrst/ -autoapi/ +/autoapi/ # ctags and similar ################### diff --git a/Makefile b/Makefile index 1971076a3..842c18da5 100644 --- a/Makefile +++ b/Makefile @@ -67,6 +67,7 @@ help: clean: rm -rf $(BUILDDIR)/* + rm -rf autoapi rm -rf $(STUBDIR) $(DISTDIR) *.egg-info html: stubs @@ -213,10 +214,10 @@ check-translate: locale/circuitpython.pot $(wildcard locale/*.po) $(PYTHON) tools/check_translations.py $^ stubs: - mkdir -p circuitpython-stubs - python tools/extract_pyi.py shared-bindings/ $(STUBDIR) - python tools/extract_pyi.py ports/atmel-samd/bindings $(STUBDIR) - python setup.py sdist + @mkdir -p circuitpython-stubs + @$(PYTHON) tools/extract_pyi.py shared-bindings/ $(STUBDIR) + @$(PYTHON) tools/extract_pyi.py ports/atmel-samd/bindings $(STUBDIR) + @$(PYTHON) setup.py -q sdist update-frozen-libraries: @echo "Updating all frozen libraries to latest tagged version." diff --git a/conf.py b/conf.py index aea84dd21..ee65e39fb 100644 --- a/conf.py +++ b/conf.py @@ -71,11 +71,13 @@ extensions.append('autoapi.extension') autoapi_type = 'python' # Uncomment this if debugging autoapi -# autoapi_keep_files = True -autoapi_dirs = ['circuitpython-stubs'] +autoapi_keep_files = True +autoapi_dirs = [os.path.join('circuitpython-stubs', x) for x in os.listdir('circuitpython-stubs')] +print(autoapi_dirs) autoapi_add_toctree_entry = False autoapi_options = ['members', 'undoc-members', 'private-members', 'show-inheritance', 'special-members', 'show-module-summary'] autoapi_template_dir = 'docs/autoapi/templates' +autoapi_python_use_implicit_namespaces = True # The encoding of source files. #source_encoding = 'utf-8-sig' diff --git a/docs/autoapi/templates/python/module.rst b/docs/autoapi/templates/python/module.rst new file mode 100644 index 000000000..7ede6bdfd --- /dev/null +++ b/docs/autoapi/templates/python/module.rst @@ -0,0 +1,93 @@ +{% if not obj.display %} +:orphan: + +{% endif %} +:mod:`{{ obj.name }}` +======={{ "=" * obj.name|length }} + +.. py:module:: {{ obj.name }} + +{% if obj.docstring %} +.. autoapi-nested-parse:: + + {{ obj.docstring|prepare_docstring|indent(3) }} + +{% endif %} + +{% block subpackages %} +{% set visible_subpackages = obj.subpackages|selectattr("display")|list %} +{% if visible_subpackages %} +.. toctree:: + :titlesonly: + :maxdepth: 3 + +{% for subpackage in visible_subpackages %} + {{ subpackage.short_name }}/index.rst +{% endfor %} + + +{% endif %} +{% endblock %} +{% block submodules %} +{% set visible_submodules = obj.submodules|selectattr("display")|list %} +{% if visible_submodules %} + +.. toctree:: + :titlesonly: + :maxdepth: 1 + +{% for submodule in visible_submodules %} + {{ submodule.short_name }}/index.rst +{% endfor %} + + +{% endif %} +{% endblock %} +{% block content %} +{% if obj.all is not none %} +{% set visible_children = obj.children|selectattr("short_name", "in", obj.all)|list %} +{% elif obj.type is equalto("package") %} +{% set visible_children = obj.children|selectattr("display")|list %} +{% else %} +{% set visible_children = obj.children|selectattr("display")|rejectattr("imported")|list %} +{% endif %} +{% if visible_children %} + +{% set visible_classes = visible_children|selectattr("type", "equalto", "class")|list %} +{% set visible_functions = visible_children|selectattr("type", "equalto", "function")|list %} +{% if "show-module-summary" in autoapi_options and (visible_classes or visible_functions) %} +{% block classes %} +{% if visible_classes %} +Classes +~~~~~~~ + +.. autoapisummary:: + +{% for klass in visible_classes %} + {{ klass.id }} +{% endfor %} + + +{% endif %} +{% endblock %} + +{% block functions %} +{% if visible_functions %} +Functions +~~~~~~~~~ + +.. autoapisummary:: + +{% for function in visible_functions %} + {{ function.id }} +{% endfor %} + + +{% endif %} +{% endblock %} +{% endif %} +{% for obj_item in visible_children %} +{{ obj_item.rendered|indent(0) }} +{% endfor %} +{% endif %} +{% endblock %} diff --git a/shared-bindings/math/__init__.c b/shared-bindings/math/__init__.c index 56155306f..8226a08ec 100644 --- a/shared-bindings/math/__init__.c +++ b/shared-bindings/math/__init__.c @@ -78,178 +78,170 @@ STATIC NORETURN void math_error(void) { // 1.442695040888963407354163704 is 1/_M_LN2 #define log2(x) (log(x) * 1.442695040888963407354163704) #endif - //| Constants - //| --------- - //| - //| e: Any = ... - //| """base of the natural logarithm""" - //| - //| pi: Any = ... - //| """the ratio of a circle's circumference to its diameter""" - //| - - //| Functions - //| --------- - //| - //| def acos(x: Any) -> Any: - //| """Return the inverse cosine of ``x``.""" - //| ... - //| - //| def asin(x: Any) -> Any: - //| """Return the inverse sine of ``x``.""" - //| ... - //| - //| def atan(x: Any) -> Any: - //| """Return the inverse tangent of ``x``.""" - //| ... - //| - //| def atan2(y: Any, x: Any) -> Any: - //| """Return the principal value of the inverse tangent of ``y/x``.""" - //| ... - //| - //| def ceil(x: Any) -> Any: - //| """Return an integer, being ``x`` rounded towards positive infinity.""" - //| ... - //| - //| def copysign(x: Any, y: Any) -> Any: - //| """Return ``x`` with the sign of ``y``.""" - //| ... - //| - //| def cos(x: Any) -> Any: - //| """Return the cosine of ``x``.""" - //| ... - //| - //| def degrees(x: Any) -> Any: - //| """Return radians ``x`` converted to degrees.""" - //| ... - //| - //| def exp(x: Any) -> Any: - //| """Return the exponential of ``x``.""" - //| ... - //| - //| def fabs(x: Any) -> Any: - //| """Return the absolute value of ``x``.""" - //| ... - //| - //| def floor(x: Any) -> Any: - //| """Return an integer, being ``x`` rounded towards negative infinity.""" - //| ... - //| - //| def fmod(x: Any, y: Any) -> Any: - //| """Return the remainder of ``x/y``.""" - //| ... - //| - //| def frexp(x: Any) -> Any: - //| """Decomposes a floating-point number into its mantissa and exponent. - //| The returned value is the tuple ``(m, e)`` such that ``x == m * 2**e`` - //| exactly. If ``x == 0`` then the function returns ``(0.0, 0)``, otherwise - //| the relation ``0.5 <= abs(m) < 1`` holds.""" - //| ... - //| - //| def isfinite(x: Any) -> Any: - //| """Return ``True`` if ``x`` is finite.""" - //| ... - //| - //| def isinf(x: Any) -> Any: - //| """Return ``True`` if ``x`` is infinite.""" - //| ... - //| - //| def isnan(x: Any) -> Any: - //| """Return ``True`` if ``x`` is not-a-number""" - //| ... - //| - //| def ldexp(x: Any, exp: Any) -> Any: - //| """Return ``x * (2**exp)``.""" - //| ... - //| - //| def modf(x: Any) -> Any: - //| """Return a tuple of two floats, being the fractional and integral parts of - //| ``x``. Both return values have the same sign as ``x``.""" - //| ... - //| - //| def pow(x: Any, y: Any) -> Any: - //| """Returns ``x`` to the power of ``y``.""" - //| - //| def radians(x: Any) -> Any: - //| """Return degrees ``x`` converted to radians.""" - //| - //| def sin(x: Any) -> Any: - //| """Return the sine of ``x``.""" - //| ... - //| - //| def sqrt(x: Any) -> Any: - //| """Returns the square root of ``x``.""" - //| ... - //| - //| def tan(x: Any) -> Any: ... - //| """Return the tangent of ``x``.""" - //| ... - //| - //| def trunc(x: Any) -> Any: - //| """Return an integer, being ``x`` rounded towards 0.""" - //| ... - //| + +//| e: Any = ... +//| """base of the natural logarithm""" +//| +//| pi: Any = ... +//| """the ratio of a circle's circumference to its diameter""" +//| + +//| def acos(x: Any) -> Any: +//| """Return the inverse cosine of ``x``.""" +//| ... +//| +//| def asin(x: Any) -> Any: +//| """Return the inverse sine of ``x``.""" +//| ... +//| +//| def atan(x: Any) -> Any: +//| """Return the inverse tangent of ``x``.""" +//| ... +//| +//| def atan2(y: Any, x: Any) -> Any: +//| """Return the principal value of the inverse tangent of ``y/x``.""" +//| ... +//| +//| def ceil(x: Any) -> Any: +//| """Return an integer, being ``x`` rounded towards positive infinity.""" +//| ... +//| +//| def copysign(x: Any, y: Any) -> Any: +//| """Return ``x`` with the sign of ``y``.""" +//| ... +//| +//| def cos(x: Any) -> Any: +//| """Return the cosine of ``x``.""" +//| ... +//| +//| def degrees(x: Any) -> Any: +//| """Return radians ``x`` converted to degrees.""" +//| ... +//| +//| def exp(x: Any) -> Any: +//| """Return the exponential of ``x``.""" +//| ... +//| +//| def fabs(x: Any) -> Any: +//| """Return the absolute value of ``x``.""" +//| ... +//| +//| def floor(x: Any) -> Any: +//| """Return an integer, being ``x`` rounded towards negative infinity.""" +//| ... +//| +//| def fmod(x: Any, y: Any) -> Any: +//| """Return the remainder of ``x/y``.""" +//| ... +//| +//| def frexp(x: Any) -> Any: +//| """Decomposes a floating-point number into its mantissa and exponent. +//| The returned value is the tuple ``(m, e)`` such that ``x == m * 2**e`` +//| exactly. If ``x == 0`` then the function returns ``(0.0, 0)``, otherwise +//| the relation ``0.5 <= abs(m) < 1`` holds.""" +//| ... +//| +//| def isfinite(x: Any) -> Any: +//| """Return ``True`` if ``x`` is finite.""" +//| ... +//| +//| def isinf(x: Any) -> Any: +//| """Return ``True`` if ``x`` is infinite.""" +//| ... +//| +//| def isnan(x: Any) -> Any: +//| """Return ``True`` if ``x`` is not-a-number""" +//| ... +//| +//| def ldexp(x: Any, exp: Any) -> Any: +//| """Return ``x * (2**exp)``.""" +//| ... +//| +//| def modf(x: Any) -> Any: +//| """Return a tuple of two floats, being the fractional and integral parts of +//| ``x``. Both return values have the same sign as ``x``.""" +//| ... +//| +//| def pow(x: Any, y: Any) -> Any: +//| """Returns ``x`` to the power of ``y``.""" +//| +//| def radians(x: Any) -> Any: +//| """Return degrees ``x`` converted to radians.""" +//| +//| def sin(x: Any) -> Any: +//| """Return the sine of ``x``.""" +//| ... +//| +//| def sqrt(x: Any) -> Any: +//| """Returns the square root of ``x``.""" +//| ... +//| +//| def tan(x: Any) -> Any: +//| """Return the tangent of ``x``.""" +//| ... +//| +//| def trunc(x: Any) -> Any: +//| """Return an integer, being ``x`` rounded towards 0.""" +//| ... +//| MATH_FUN_1_ERRCOND(sqrt, sqrt, (x < (mp_float_t)0.0)) MATH_FUN_2(pow, pow) MATH_FUN_1(exp, exp) #if MICROPY_PY_MATH_SPECIAL_FUNCTIONS -// Special functions -// ----------------- -// -// .. function:: expm1(x) -// -// Return ``exp(x) - 1``. -// +//| def expm1(x): +//| """Return ``exp(x) - 1``.""" +//| ... +//| MATH_FUN_1(expm1, expm1) -// .. function:: log2(x) -// -// Return the base-2 logarithm of ``x``. -// +//| def log2(x): +//| """Return the base-2 logarithm of ``x``.""" +//| ... +//| MATH_FUN_1_ERRCOND(log2, log2, (x <= (mp_float_t)0.0)) -// .. function:: log10(x) -// -// Return the base-10 logarithm of ``x``. -// +//| def log10(x): +//| """Return the base-10 logarithm of ``x``.""" +//| ... +//| MATH_FUN_1_ERRCOND(log10, log10, (x <= (mp_float_t)0.0)) -// .. function:: cosh(x) -// -// Return the hyperbolic cosine of ``x``. -// +//| def cosh(x): +//| """Return the hyperbolic cosine of ``x``.""" +//| ... +//| MATH_FUN_1(cosh, cosh) -// .. function:: sinh(x) -// -// Return the hyperbolic sine of ``x``. -// +//| def sinh(x): +//| """Return the hyperbolic sine of ``x``.""" +//| ... +//| MATH_FUN_1(sinh, sinh) -// .. function:: tanh(x) -// -// Return the hyperbolic tangent of ``x``. -// +//| def tanh(x): +//| """Return the hyperbolic tangent of ``x``.""" +//| ... +//| MATH_FUN_1(tanh, tanh) -// .. function:: acosh(x) -// -// Return the inverse hyperbolic cosine of ``x``. -// +//| def acosh(x): +//| """Return the inverse hyperbolic cosine of ``x``.""" +//| ... +//| MATH_FUN_1(acosh, acosh) -// .. function:: asinh(x) -// -// Return the inverse hyperbolic sine of ``x``. -// +//| def asinh(x): +//| """Return the inverse hyperbolic sine of ``x``.""" +//| ... +//| MATH_FUN_1(asinh, asinh) -// .. function:: atanh(x) -// -// Return the inverse hyperbolic tangent of ``x``. -// +//| def atanh(x): +//| """Return the inverse hyperbolic tangent of ``x``.""" +//| ... +//| MATH_FUN_1(atanh, atanh) #endif @@ -288,28 +280,28 @@ MATH_FUN_1_TO_INT(trunc, trunc) MATH_FUN_2(ldexp, ldexp) #if MICROPY_PY_MATH_SPECIAL_FUNCTIONS -// .. function:: erf(x) -// -// Return the error function of ``x``. -// +//| def erf(x): +//| """Return the error function of ``x``.""" +//| ... +//| MATH_FUN_1(erf, erf) -// .. function:: erfc(x) -// -// Return the complementary error function of ``x``. -// +//| def erfc(x): +//| """Return the complementary error function of ``x``.""" +//| ... +//| MATH_FUN_1(erfc, erfc) -// .. function:: gamma(x) -// -// Return the gamma function of ``x``. -// +//| def gamma(x): +//| """Return the gamma function of ``x``.""" +//| ... +//| MATH_FUN_1(gamma, tgamma) -// .. function:: lgamma(x) -// -// Return the natural logarithm of the gamma function of ``x``. -// +//| def lgamma(x): +//| """Return the natural logarithm of the gamma function of ``x``.""" +//| ... +//| MATH_FUN_1(lgamma, lgamma) #endif //TODO: factorial, fsum diff --git a/shared-bindings/ulab/__init__.pyi b/shared-bindings/ulab/__init__.pyi index d2ff7eb80..e5de1391b 100644 --- a/shared-bindings/ulab/__init__.pyi +++ b/shared-bindings/ulab/__init__.pyi @@ -1,9 +1,4 @@ - -:mod:`ulab` --- Manipulate numeric data similar to numpy -======================================================== - -.. module:: ulab - :synopsis: Manipulate numeric data similar to numpy +"""Manipulate numeric data similar to numpy `ulab` is a numpy-like module for micropython, meant to simplify and speed up common mathematical operations on arrays. The primary goal was to @@ -17,507 +12,158 @@ https://micropython-ulab.readthedocs.io/en/latest/ `ulab` is modeled after numpy, and aims to be a compatible subset where possible. Numpy's documentation can be found at -https://docs.scipy.org/doc/numpy/index.html - -.. contents:: - -.. attribute:: __version__ - -The closest corresponding version of micropython-ulab - -ulab.array -- 1- and 2- dimensional array ------------------------------------------ - -.. class:: ulab.array(values, \*, dtype=float) - - :param sequence values: Sequence giving the initial content of the array. - :param dtype: The type of array values, ``int8``, ``uint8``, ``int16``, ``uint16``, or ``float`` - - The `values` sequence can either be another ~ulab.array, sequence of numbers - (in which case a 1-dimensional array is created), or a sequence where each - subsequence has the same length (in which case a 2-dimensional array is - created). - - Passing a ~ulab.array and a different dtype can be used to convert an array - from one dtype to another. - - In many cases, it is more convenient to create an array from a function - like `zeros` or `linspace`. - - `ulab.array` implements the buffer protocol, so it can be used in many - places an `array.array` can be used. - - .. attribute:: shape - - The size of the array, a tuple of length 1 or 2 - - .. attribute:: size - - The number of elements in the array - - .. attribute:: itemsize - - The number of elements in the array - - .. method:: flatten(\*, order='C') - - :param order: Whether to flatten by rows ('C') or columns ('F') - - Returns a new `ulab.array` object which is always 1 dimensional. - If order is 'C' (the default", then the data is ordered in rows; - If it is 'F', then the data is ordered in columns. "C" and "F" refer - to the typical storage organization of the C and Fortran languages. - - .. method:: sort(\*, axis=1) +https://docs.scipy.org/doc/numpy/index.html""" - :param axis: Whether to sort elements within rows (0), columns (1), or elements (None) - .. method:: transpose() +class array: + """1- and 2- dimensional array""" + def __init__(self, values, *, dtype=float): + """:param sequence values: Sequence giving the initial content of the array. + :param dtype: The type of array values, ``int8``, ``uint8``, ``int16``, ``uint16``, or ``float`` - Swap the rows and columns of a 2-dimensional array + The `values` sequence can either be another ~ulab.array, sequence of numbers + (in which case a 1-dimensional array is created), or a sequence where each + subsequence has the same length (in which case a 2-dimensional array is + created). - .. method:: __add__() + Passing a ~ulab.array and a different dtype can be used to convert an array + from one dtype to another. - Adds corresponding elements of the two arrays, or adds a number to all - elements of the array. If both arguments are arrays, their sizes must match. + In many cases, it is more convenient to create an array from a function + like `zeros` or `linspace`. - .. method:: __sub__() + `ulab.array` implements the buffer protocol, so it can be used in many + places an `array.array` can be used.""" + ... - Subtracts corresponding elements of the two arrays, or adds a number to all - elements of the array. If both arguments are arrays, their sizes must match. + shape: tuple = ... + """The size of the array, a tuple of length 1 or 2""" - .. method:: __mul__() + size: int = ... + """The number of elements in the array""" - Multiplies corresponding elements of the two arrays, or multiplies - all elements of the array by a number. If both arguments are arrays, - their sizes must match. + itemsize: int = ... + """The number of elements in the array""" - .. method:: __div__() + def flatten(self, *, order='C'): + """:param order: Whether to flatten by rows ('C') or columns ('F') - Multiplies corresponding elements of the two arrays, or divides - all elements of the array by a number. If both arguments are arrays, - their sizes must match. + Returns a new `ulab.array` object which is always 1 dimensional. + If order is 'C' (the default", then the data is ordered in rows; + If it is 'F', then the data is ordered in columns. "C" and "F" refer + to the typical storage organization of the C and Fortran languages.""" + ... - .. method:: __pow__() + def sort(self, *, axis=1): + """:param axis: Whether to sort elements within rows (0), columns (1), or elements (None)""" + ... - Computes the power (x**y) of corresponding elements of the the two arrays, - or one number and one array. If both arguments are arrays, their sizes - must match. + def transpose(self): + """Swap the rows and columns of a 2-dimensional array""" + ... - .. method:: __getitem__() + def __add__(self): + """Adds corresponding elements of the two arrays, or adds a number to all + elements of the array. If both arguments are arrays, their sizes must match.""" + ... - Retrieve an element of the array. + def __sub__(self): + """Subtracts corresponding elements of the two arrays, or adds a number to all + elements of the array. If both arguments are arrays, their sizes must match.""" + ... - .. method:: __setitem__() + def __mul__(self): + """Multiplies corresponding elements of the two arrays, or multiplies + all elements of the array by a number. If both arguments are arrays, + their sizes must match.""" + ... - Set an element of the array. + def __div__(self): + """Multiplies corresponding elements of the two arrays, or divides + all elements of the array by a number. If both arguments are arrays, + their sizes must match.""" + ... -Array type codes ----------------- -.. attribute:: int8 + def __pow__(): + """Computes the power (x**y) of corresponding elements of the the two arrays, + or one number and one array. If both arguments are arrays, their sizes + must match.""" + ... - Type code for signed integers in the range -128 .. 127 inclusive, like the 'b' typecode of `array.array` + def __getitem__(): + """Retrieve an element of the array.""" + ... -.. attribute:: int16 + def __setitem__(): + """Set an element of the array.""" + ... - Type code for signed integers in the range -32768 .. 32767 inclusive, like the 'h' typecode of `array.array` +int8 = ... +"""Type code for signed integers in the range -128 .. 127 inclusive, like the 'b' typecode of `array.array`""" -.. attribute:: float +int16 = ... +"""Type code for signed integers in the range -32768 .. 32767 inclusive, like the 'h' typecode of `array.array`""" - Type code for floating point values, like the 'f' typecode of `array.array` +float = ... +"""Type code for floating point values, like the 'f' typecode of `array.array`""" -.. attribute:: uint8 +uint8 = ... +"""Type code for unsigned integers in the range 0 .. 255 inclusive, like the 'H' typecode of `array.array`""" - Type code for unsigned integers in the range 0 .. 255 inclusive, like the 'H' typecode of `array.array` +uint16 = ... +"""Type code for unsigned integers in the range 0 .. 65535 inclusive, like the 'h' typecode of `array.array`""" -.. attribute:: uint16 +def ones(shape, *, dtype=float): + """ + .. param: shape + Shape of the array, either an integer (for a 1-D array) or a tuple of 2 integers (for a 2-D array) - Type code for unsigned integers in the range 0 .. 65535 inclusive, like the 'h' typecode of `array.array` + .. param: dtype + Type of values in the array + Return a new array of the given shape with all elements set to 1.""" + ... -Basic Array defining functions ------------------------------- +def zeros(shape, *, dtype): + """ + .. param: shape + Shape of the array, either an integer (for a 1-D array) or a tuple of 2 integers (for a 2-D array) -.. method:: ones(shape, \*, dtype=float) + .. param: dtype + Type of values in the array - .. param: shape - Shape of the array, either an integer (for a 1-D array) or a tuple of 2 integers (for a 2-D array) + Return a new array of the given shape with all elements set to 0.""" + ... - .. param: dtype - Type of values in the array - - Return a new array of the given shape with all elements set to 1. - -.. method:: zeros - - .. param: shape - Shape of the array, either an integer (for a 1-D array) or a tuple of 2 integers (for a 2-D array) - - .. param: dtype - Type of values in the array - Return a new array of the given shape with all elements set to 0. +def eye(size, *, dtype=float): + """Return a new square array of size, with the diagonal elements set to 1 + and the other elements set to 0.""" + ... - -.. method:: eye(size, \*, dtype=float) - - Return a new square array of size, with the diagonal elements set to 1 - and the other elements set to 0. - -.. method:: linspace(start, stop, \*, dtype=float, num=50, endpoint=True) - - .. param: start +def linspace(start, stop, *, dtype=float, num=50, endpoint=True): + """ + .. param: start First value in the array - .. param: stop + .. param: stop Final value in the array - .. param int: num + .. param int: num Count of values in the array - .. param: dtype + .. param: dtype Type of values in the array - .. param bool: endpoint + .. param bool: endpoint Whether the ``stop`` value is included. Note that even when endpoint=True, the exact ``stop`` value may not be included due to the inaccuracy of floating point arithmetic. - Return a new 1-D array with ``num`` elements ranging from ``start`` to ``stop`` linearly. - - -:mod:`ulab.compare` --- Comparison functions -============================================ - -.. module::ulab.compare - -.. method:: clip(x1, x2, x3) - - Constrain the values from ``x1`` to be between ``x2`` and ``x3``. - ``x2`` is assumed to be less than or equal to ``x3``. - - Arguments may be ulab arrays or numbers. All array arguments - must be the same size. If the inputs are all scalars, a 1-element - array is returned. - - Shorthand for ``ulab.maximum(x2, ulab.minimum(x1, x3))`` - -.. method:: maximum(x1, x2) - - Compute the element by element maximum of the arguments. - - Arguments may be ulab arrays or numbers. All array arguments - must be the same size. If the inputs are both scalars, a number is - returned - -.. method:: minimum(x1, x2) - - Compute the element by element minimum of the arguments. - - Arguments may be ulab arrays or numbers. All array arguments - must be the same size. If the inputs are both scalars, a number is - returned - - -:mod:`ulab.vector` --- Element-by-element functions -=================================================== - -.. module:: ulab.vector - -These functions can operate on numbers, 1-D arrays, or 2-D arrays by -applying the function to every element in the array. This is typically -much more efficient than expressing the same operation as a Python loop. - -.. method:: acos - - Computes the inverse cosine function - -.. method:: acosh - - Computes the inverse hyperbolic cosine function - -.. method:: asin - - Computes the inverse sine function - -.. method:: asinh - - Computes the inverse hyperbolic sine function - -.. method:: around(a, \*, decimals) - - Returns a new float array in which each element is rounded to - ``decimals`` places. - -.. method:: atan - - Computes the inverse tangent function; the return values are in the - range [-pi/2,pi/2]. - -.. method:: atan2(y,x) - - Computes the inverse tangent function of y/x; the return values are in - the range [-pi, pi]. - -.. method:: atanh - - Computes the inverse hyperbolic tangent function - -.. method:: ceil - - Rounds numbers up to the next whole number - -.. method:: cos - - Computes the cosine function - -.. method:: erf - - Computes the error function, which has applications in statistics - -.. method:: erfc - - Computes the complementary error function, which has applications in statistics - -.. method:: exp - - Computes the exponent function. - -.. method:: expm1 - - Computes $e^x-1$. In certain applications, using this function preserves numeric accuracy better than the `exp` function. - -.. method:: floor - - Rounds numbers up to the next whole number - -.. method:: gamma - - Computes the gamma function - -.. method:: lgamma - - Computes the natural log of the gamma function - -.. method:: log - - Computes the natural log - -.. method:: log10 - - Computes the log base 10 - -.. method:: log2 - - Computes the log base 2 - -.. method:: sin - - Computes the sine - -.. method:: sinh - - Computes the hyperbolic sine - -.. method:: sqrt - - Computes the square root - -.. method:: tan - - Computes the tangent - -.. method:: tanh - - Computes the hyperbolic tangent - -:mod:`ulab.linalg` - Linear algebra functions -============================================= - -.. module:: ulab.linalg - -.. method:: cholesky(A) - - :param ~ulab.array A: a positive definite, symmetric square matrix - :return ~ulab.array L: a square root matrix in the lower triangular form - :raises ValueError: If the input does not fulfill the necessary conditions - - The returned matrix satisfies the equation m=LL* - -.. method:: det - - :param: m, a square matrix - :return float: The determinant of the matrix - - Computes the eigenvalues and eigenvectors of a square matrix - -.. method:: dot(m1, m2) - - :param ~ulab.array m1: a matrix - :param ~ulab.array m2: a matrix - - Computes the matrix product of two matrices - - **WARNING:** Unlike ``numpy``, this function cannot be used to compute the dot product of two vectors - -.. method:: eig(m) - - :param m: a square matrix - :return tuple (eigenvectors, eigenvalues): - - Computes the eigenvalues and eigenvectors of a square matrix - -.. method:: inv(m) - - :param ~ulab.array m: a square matrix - :return: The inverse of the matrix, if it exists - :raises ValueError: if the matrix is not invertible - - Computes the inverse of a square matrix - -.. method:: size(array) - - Return the total number of elements in the array, as an integer. - -.. method:: trace(m) - - :param m: a square matrix - - Compute the trace of the matrix, the sum of its diagonal elements. - -:mod:`ulab.filter` --- Filtering functions -========================================== - -.. module:: ulab.filter - -.. method:: convolve(r, c=None) - - :param ulab.array a: - :param ulab.array v: - - Returns the discrete, linear convolution of two one-dimensional sequences. - The result is always an array of float. Only the ``full`` mode is supported, - and the ``mode`` named parameter of numpy is not accepted. Note that all other - modes can be had by slicing a ``full`` result. - - Convolution filters can implement high pass, low pass, band pass, etc., - filtering operations. Convolution filters are typically constructed ahead - of time. This can be done using desktop python with scipy, or on web pages - such as https://fiiir.com/ - - Convolution is most time-efficient when both inputs are of float type. - -:mod:`ulab.fft` --- Frequency-domain functions -============================================== - -.. module:: ulab.fft - -.. method:: fft(r, c=None) - - :param ulab.array r: A 1-dimension array of values whose size is a power of 2 - :param ulab.array c: An optional 1-dimension array of values whose size is a power of 2, giving the complex part of the value - :return tuple (r, c): The real and complex parts of the FFT - - Perform a Fast Fourier Transform from the time domain into the frequency domain - - See also ~ulab.extras.spectrum, which computes the magnitude of the fft, - rather than separately returning its real and imaginary parts. - -.. method:: ifft(r, c=None) - - :param ulab.array r: A 1-dimension array of values whose size is a power of 2 - :param ulab.array c: An optional 1-dimension array of values whose size is a power of 2, giving the complex part of the value - :return tuple (r, c): The real and complex parts of the inverse FFT - - Perform an Inverse Fast Fourier Transform from the frequeny domain into the time domain - -:mod:`ulab.numerical` --- Numerical and Statistical functions -============================================================= - -.. module:: ulab.numerical - -Most of these functions take an "axis" argument, which indicates whether to -operate over the flattened array (None), rows (0), or columns (1). - -.. method:: argmax(array, \*, axis=None) - - Return the index of the maximum element of the 1D array - -.. method:: argmin(array, \*, axis=None) - - Return the index of the minimum element of the 1D array - -.. method:: argsort(array, \*, axis=None) - - Returns an array which gives indices into the input array from least to greatest. - -.. method:: diff(array, \*, axis=1) - - Return the numerical derivative of successive elements of the array, as - an array. axis=None is not supported. - -.. method:: flip(array, \*, axis=None) - - Returns a new array that reverses the order of the elements along the - given axis, or along all axes if axis is None. - -.. method:: max(array, \*, axis=None) - - Return the maximum element of the 1D array - -.. method:: mean(array, \*, axis=None) - - Return the mean element of the 1D array, as a number if axis is None, otherwise as an array. - -.. method:: min(array, \*, axis=None) - - Return the minimum element of the 1D array - -.. method:: roll(array, distance, \*, axis=None) - - Shift the content of a vector by the positions given as the second - argument. If the ``axis`` keyword is supplied, the shift is applied to - the given axis. The array is modified in place. - -.. method:: std(array, \*, axis=None) - - Return the standard deviation of the array, as a number if axis is None, otherwise as an array. - -.. method:: sum(array, \*, axis=None) - - Return the sum of the array, as a number if axis is None, otherwise as an array. - -.. method:: sort(array, \*, axis=0) - - Sort the array along the given axis, or along all axes if axis is None. - The array is modified in place. - -:mod:`ulab.poly` --- Polynomial functions -========================================= - -.. module:: ulab.poly - -.. method:: polyfit([x, ] y, degree) - - Return a polynomial of given degree that approximates the function - f(x)=y. If x is not supplied, it is the range(len(y)). - -.. method:: polyval(p, x) - - Evaluate the polynomial p at the points x. x must be an array. - -:mod:`ulab.extras` --- Additional functions not in numpy -======================================================== - -.. method:: spectrum(r): - - :param ulab.array r: A 1-dimension array of values whose size is a power of 2 - - Computes the spectrum of the input signal. This is the absolute value of the (complex-valued) fft of the signal. - - This function is similar to scipy's ``scipy.signal.spectrogram``. + Return a new 1-D array with ``num`` elements ranging from ``start`` to ``stop`` linearly.""" + ... diff --git a/shared-bindings/ulab/compare/__init__.pyi b/shared-bindings/ulab/compare/__init__.pyi new file mode 100644 index 000000000..00a9eae1e --- /dev/null +++ b/shared-bindings/ulab/compare/__init__.pyi @@ -0,0 +1,30 @@ +"""Comparison functions""" + +def clip(x1, x2, x3): + """ + Constrain the values from ``x1`` to be between ``x2`` and ``x3``. + ``x2`` is assumed to be less than or equal to ``x3``. + + Arguments may be ulab arrays or numbers. All array arguments + must be the same size. If the inputs are all scalars, a 1-element + array is returned. + + Shorthand for ``ulab.maximum(x2, ulab.minimum(x1, x3))``""" + ... + +def maximum(x1, x2): + """ + Compute the element by element maximum of the arguments. + + Arguments may be ulab arrays or numbers. All array arguments + must be the same size. If the inputs are both scalars, a number is + returned""" + ... + +def minimum(x1, x2): + """Compute the element by element minimum of the arguments. + + Arguments may be ulab arrays or numbers. All array arguments + must be the same size. If the inputs are both scalars, a number is + returned""" + ... diff --git a/shared-bindings/ulab/extras/__init__.pyi b/shared-bindings/ulab/extras/__init__.pyi new file mode 100644 index 000000000..4da56a582 --- /dev/null +++ b/shared-bindings/ulab/extras/__init__.pyi @@ -0,0 +1,10 @@ +"""Additional functions not in numpy""" + +def spectrum(r): + """ + :param ulab.array r: A 1-dimension array of values whose size is a power of 2 + + Computes the spectrum of the input signal. This is the absolute value of the (complex-valued) fft of the signal. + + This function is similar to scipy's ``scipy.signal.spectrogram``.""" + ... diff --git a/shared-bindings/ulab/fft/__init__.pyi b/shared-bindings/ulab/fft/__init__.pyi new file mode 100644 index 000000000..401ecb644 --- /dev/null +++ b/shared-bindings/ulab/fft/__init__.pyi @@ -0,0 +1,22 @@ +"""Frequency-domain functions""" + +def fft(r, c=None): + """ + :param ulab.array r: A 1-dimension array of values whose size is a power of 2 + :param ulab.array c: An optional 1-dimension array of values whose size is a power of 2, giving the complex part of the value + :return tuple (r, c): The real and complex parts of the FFT + + Perform a Fast Fourier Transform from the time domain into the frequency domain + + See also ~ulab.extras.spectrum, which computes the magnitude of the fft, + rather than separately returning its real and imaginary parts.""" + ... + +def ifft(r, c=None): + """ + :param ulab.array r: A 1-dimension array of values whose size is a power of 2 + :param ulab.array c: An optional 1-dimension array of values whose size is a power of 2, giving the complex part of the value + :return tuple (r, c): The real and complex parts of the inverse FFT + + Perform an Inverse Fast Fourier Transform from the frequeny domain into the time domain""" + ... diff --git a/shared-bindings/ulab/filter/__init__.pyi b/shared-bindings/ulab/filter/__init__.pyi new file mode 100644 index 000000000..fff404300 --- /dev/null +++ b/shared-bindings/ulab/filter/__init__.pyi @@ -0,0 +1,19 @@ +"""Filtering functions""" + +def convolve(r, c=None): + """ + :param ulab.array a: + :param ulab.array v: + + Returns the discrete, linear convolution of two one-dimensional sequences. + The result is always an array of float. Only the ``full`` mode is supported, + and the ``mode`` named parameter of numpy is not accepted. Note that all other + modes can be had by slicing a ``full`` result. + + Convolution filters can implement high pass, low pass, band pass, etc., + filtering operations. Convolution filters are typically constructed ahead + of time. This can be done using desktop python with scipy, or on web pages + such as https://fiiir.com/ + + Convolution is most time-efficient when both inputs are of float type.""" + ... diff --git a/shared-bindings/ulab/linalg/__init__.pyi b/shared-bindings/ulab/linalg/__init__.pyi new file mode 100644 index 000000000..d16e61807 --- /dev/null +++ b/shared-bindings/ulab/linalg/__init__.pyi @@ -0,0 +1,57 @@ +"""Linear algebra functions""" + + +def cholesky(A): + """ + :param ~ulab.array A: a positive definite, symmetric square matrix + :return ~ulab.array L: a square root matrix in the lower triangular form + :raises ValueError: If the input does not fulfill the necessary conditions + + The returned matrix satisfies the equation m=LL*""" + ... + +def det(): + """ + :param: m, a square matrix + :return float: The determinant of the matrix + + Computes the eigenvalues and eigenvectors of a square matrix""" + ... + +def dot(m1, m2): + """ + :param ~ulab.array m1: a matrix + :param ~ulab.array m2: a matrix + + Computes the matrix product of two matrices + + **WARNING:** Unlike ``numpy``, this function cannot be used to compute the dot product of two vectors""" + ... + +def eig(m): + """ + :param m: a square matrix + :return tuple (eigenvectors, eigenvalues): + + Computes the eigenvalues and eigenvectors of a square matrix""" + ... + +def inv(m): + """ + :param ~ulab.array m: a square matrix + :return: The inverse of the matrix, if it exists + :raises ValueError: if the matrix is not invertible + + Computes the inverse of a square matrix""" + ... + +def size(array): + """Return the total number of elements in the array, as an integer.""" + ... + +def trace(m): + """ + :param m: a square matrix + + Compute the trace of the matrix, the sum of its diagonal elements.""" + ... diff --git a/shared-bindings/ulab/numerical/__init__.pyi b/shared-bindings/ulab/numerical/__init__.pyi new file mode 100644 index 000000000..759678921 --- /dev/null +++ b/shared-bindings/ulab/numerical/__init__.pyi @@ -0,0 +1,57 @@ +"""Numerical and Statistical functions + +Most of these functions take an "axis" argument, which indicates whether to +operate over the flattened array (None), rows (0), or columns (1).""" + +def argmax(array, *, axis=None): + """Return the index of the maximum element of the 1D array""" + ... + +def argmin(array, *, axis=None): + """Return the index of the minimum element of the 1D array""" + ... + +def argsort(array, *, axis=None): + """Returns an array which gives indices into the input array from least to greatest.""" + ... + +def diff(array, *, axis=1): + """Return the numerical derivative of successive elements of the array, as + an array. axis=None is not supported.""" + ... + +def flip(array, *, axis=None): + """Returns a new array that reverses the order of the elements along the + given axis, or along all axes if axis is None.""" + ... + +def max(array, *, axis=None): + """Return the maximum element of the 1D array""" + ... + +def mean(array, *, axis=None): + """Return the mean element of the 1D array, as a number if axis is None, otherwise as an array.""" + ... + +def min(array, *, axis=None): + """Return the minimum element of the 1D array""" + ... + +def roll(array, distance, *, axis=None): + """Shift the content of a vector by the positions given as the second + argument. If the ``axis`` keyword is supplied, the shift is applied to + the given axis. The array is modified in place.""" + ... + +def std(array, *, axis=None): + """Return the standard deviation of the array, as a number if axis is None, otherwise as an array.""" + ... + +def sum(array, *, axis=None): + """Return the sum of the array, as a number if axis is None, otherwise as an array.""" + ... + +def sort(array, *, axis=0): + """Sort the array along the given axis, or along all axes if axis is None. + The array is modified in place.""" + ... diff --git a/shared-bindings/ulab/poly/__init__.pyi b/shared-bindings/ulab/poly/__init__.pyi new file mode 100644 index 000000000..d051bbded --- /dev/null +++ b/shared-bindings/ulab/poly/__init__.pyi @@ -0,0 +1,10 @@ +"""Polynomial functions""" + +def polyfit(x, y, degree): + """Return a polynomial of given degree that approximates the function + f(x)=y. If x is not supplied, it is the range(len(y)).""" + ... + +def polyval(p, x): + """Evaluate the polynomial p at the points x. x must be an array.""" + ... diff --git a/shared-bindings/ulab/vector/__init__.pyi b/shared-bindings/ulab/vector/__init__.pyi new file mode 100644 index 000000000..2c7a80446 --- /dev/null +++ b/shared-bindings/ulab/vector/__init__.pyi @@ -0,0 +1,108 @@ +"""Element-by-element functions + +These functions can operate on numbers, 1-D arrays, or 2-D arrays by +applying the function to every element in the array. This is typically +much more efficient than expressing the same operation as a Python loop.""" + +def acos(): + """Computes the inverse cosine function""" + ... + +def acosh(): + """Computes the inverse hyperbolic cosine function""" + ... + +def asin(): + """Computes the inverse sine function""" + ... + +def asinh(): + """Computes the inverse hyperbolic sine function""" + ... + +def around(a, *, decimals): + """Returns a new float array in which each element is rounded to + ``decimals`` places.""" + ... + +def atan(): + """Computes the inverse tangent function; the return values are in the + range [-pi/2,pi/2].""" + ... + +def atan2(y,x): + """Computes the inverse tangent function of y/x; the return values are in + the range [-pi, pi].""" + ... + +def atanh(): + """Computes the inverse hyperbolic tangent function""" + ... + +def ceil(): + """Rounds numbers up to the next whole number""" + ... + +def cos(): + """Computes the cosine function""" + ... + +def erf(): + """Computes the error function, which has applications in statistics""" + ... + +def erfc(): + """Computes the complementary error function, which has applications in statistics""" + ... + +def exp(): + """Computes the exponent function.""" + ... + +def expm1(): + """Computes $e^x-1$. In certain applications, using this function preserves numeric accuracy better than the `exp` function.""" + ... + +def floor(): + """Rounds numbers up to the next whole number""" + ... + +def gamma(): + """Computes the gamma function""" + ... + +def lgamma(): + """Computes the natural log of the gamma function""" + ... + +def log(): + """Computes the natural log""" + ... + +def log10(): + """Computes the log base 10""" + ... + +def log2(): + """Computes the log base 2""" + ... + +def sin(): + """Computes the sine""" + ... + +def sinh(): + """Computes the hyperbolic sine""" + ... + +def sqrt(): + """Computes the square root""" + ... + +def tan(): + """Computes the tangent""" + ... + +def tanh(): + """Computes the hyperbolic tangent""" + ... diff --git a/tools/extract_pyi.py b/tools/extract_pyi.py index 95370f761..f15f15ba6 100644 --- a/tools/extract_pyi.py +++ b/tools/extract_pyi.py @@ -6,47 +6,47 @@ import traceback top_level = sys.argv[1].strip("/") stub_directory = sys.argv[2] -if top_level.count("/") == 1: - top_level, module = top_level.split("/") - modules = [module] -else: - modules = os.listdir(top_level) - modules = sorted(modules) - -ok = 0 -total = 0 -for module in modules: - module_path = os.path.join(top_level, module) - if not os.path.isdir(module_path): - continue +def convert_folder(top_level, stub_directory): + print(top_level, stub_directory) + ok = 0 + total = 0 + filenames = sorted(os.listdir(top_level)) pyi_lines = [] - classes = os.listdir(module_path) - classes = [x for x in sorted(classes) if x.endswith(".c")] - if classes and classes[-1] == "__init__.c": - classes.insert(0, classes.pop()) - for class_file in classes: - class_path = os.path.join(module_path, class_file) - with open(class_path, "r") as f: - for line in f: - if line.startswith("//|"): - if line[3] == " ": - line = line[4:] - elif line[3] == "\n": - line = line[3:] - else: - continue - pyi_lines.append(line) + for filename in filenames: + full_path = os.path.join(top_level, filename) + file_lines = [] + if os.path.isdir(full_path): + mok, mtotal = convert_folder(full_path, os.path.join(stub_directory, filename)) + ok += mok + total += mtotal + elif filename.endswith(".c"): + with open(full_path, "r") as f: + for line in f: + if line.startswith("//|"): + if line[3] == " ": + line = line[4:] + elif line[3] == "\n": + line = line[3:] + else: + continue + file_lines.append(line) + elif filename.endswith(".pyi"): + with open(full_path, "r") as f: + file_lines.extend(f.readlines()) + + # Always put the contents from an __init__ first. + if filename.startswith("__init__."): + pyi_lines = file_lines + pyi_lines + else: + pyi_lines.extend(file_lines) - raw_stubs = [x for x in sorted(classes) if x.endswith(".pyi")] - if raw_stubs and raw_stubs[-1] == "__init__.pyi": - raw_stubs.insert(0, raw_stubs.pop()) - for raw_stub in raw_stubs: - raw_stub_path = os.path.join(module_path, raw_stub) - with open(raw_stub_path, "r") as f: - pyi_lines.extend(f.readlines()) - stub_filename = os.path.join(stub_directory, module + ".pyi") + if not pyi_lines: + return ok, total + + stub_filename = os.path.join(stub_directory, "__init__.pyi") print(stub_filename) stub_contents = "".join(pyi_lines) + os.makedirs(stub_directory, exist_ok=True) with open(stub_filename, "w") as f: f.write(stub_contents) @@ -59,6 +59,9 @@ for module in modules: e = e.__cause__ traceback.print_exception(type(e), e, e.__traceback__) print() + return ok, total + +ok, total = convert_folder(top_level, stub_directory) print(f"{ok} ok out of {total}") -- cgit v1.2.3 From 15c2d16bf927c4cbf6c4dbb9773b7c835f26c06d Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Thu, 14 May 2020 16:06:13 -0700 Subject: Fix help doc --- shared-bindings/help.rst | 46 +++++++++++++++++++++++----------------------- 1 file changed, 23 insertions(+), 23 deletions(-) diff --git a/shared-bindings/help.rst b/shared-bindings/help.rst index 63991bff2..f6d72a556 100644 --- a/shared-bindings/help.rst +++ b/shared-bindings/help.rst @@ -1,26 +1,26 @@ -# This file is part of the MicroPython project, http://micropython.org/ -# -# The MIT License (MIT) -# -# Copyright (c) 2016 Scott Shawcroft for Adafruit Industries -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to deal -# in the Software without restriction, including without limitation the rights -# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -# copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN -# THE SOFTWARE. +.. This file is part of the MicroPython project, http://micropython.org/ + + The MIT License (MIT) + + Copyright (c) 2016 Scott Shawcroft for Adafruit Industries + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in + all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. :func:`help` - Built-in method to provide helpful information ============================================================== -- cgit v1.2.3 From 8ac3e7977f87219454dbab50264a723e797b877a Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Thu, 14 May 2020 18:48:07 -0700 Subject: Remove debug prints --- conf.py | 1 - tools/extract_pyi.py | 1 - 2 files changed, 2 deletions(-) diff --git a/conf.py b/conf.py index ee65e39fb..d6fa8f7e5 100644 --- a/conf.py +++ b/conf.py @@ -73,7 +73,6 @@ autoapi_type = 'python' # Uncomment this if debugging autoapi autoapi_keep_files = True autoapi_dirs = [os.path.join('circuitpython-stubs', x) for x in os.listdir('circuitpython-stubs')] -print(autoapi_dirs) autoapi_add_toctree_entry = False autoapi_options = ['members', 'undoc-members', 'private-members', 'show-inheritance', 'special-members', 'show-module-summary'] autoapi_template_dir = 'docs/autoapi/templates' diff --git a/tools/extract_pyi.py b/tools/extract_pyi.py index f15f15ba6..e590e25f1 100644 --- a/tools/extract_pyi.py +++ b/tools/extract_pyi.py @@ -7,7 +7,6 @@ top_level = sys.argv[1].strip("/") stub_directory = sys.argv[2] def convert_folder(top_level, stub_directory): - print(top_level, stub_directory) ok = 0 total = 0 filenames = sorted(os.listdir(top_level)) -- cgit v1.2.3