From 04ffd0dca0db404028da8ef2eb43f82b6e1b24ab Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Sat, 19 Sep 2020 13:38:04 -0700 Subject: Add gateway, subnet, and rssi info for current connected AP ap_rssi is a bound method, which I'm not keen on, but it works --- ports/esp32s2/common-hal/wifi/Radio.c | 38 ++++++++++++++++++++++++++++++ shared-bindings/wifi/Radio.c | 44 +++++++++++++++++++++++++++++++++++ shared-bindings/wifi/Radio.h | 3 +++ 3 files changed, 85 insertions(+) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index a0b8b6adc..4b2e7b64e 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -147,6 +147,44 @@ wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t return WIFI_RADIO_ERROR_NONE; } +mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self) { + if (!esp_netif_is_netif_up(self->netif)) { + return mp_const_none; + } + // Make sure the interface is in STA mode + wifi_mode_t if_mode; + esp_wifi_get_mode(&if_mode); + if (if_mode != WIFI_MODE_STA){ + return mp_const_none; + } + + wifi_ap_record_t ap_info; + esp_wifi_sta_get_ap_info(&ap_info); + + mp_obj_t rssi; + rssi = MP_OBJ_NEW_SMALL_INT(ap_info.rssi); + + return rssi; +} + +mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self) { + if (!esp_netif_is_netif_up(self->netif)) { + return mp_const_none; + } + esp_netif_ip_info_t ip_info; + esp_netif_get_ip_info(self->netif, &ip_info); + return common_hal_ipaddress_new_ipv4address(ip_info.gw.addr); +} + +mp_obj_t common_hal_wifi_radio_get_ipv4_subnet(wifi_radio_obj_t *self) { + if (!esp_netif_is_netif_up(self->netif)) { + return mp_const_none; + } + esp_netif_ip_info_t ip_info; + esp_netif_get_ip_info(self->netif, &ip_info); + return common_hal_ipaddress_new_ipv4address(ip_info.netmask.addr); +} + mp_obj_t common_hal_wifi_radio_get_ipv4_address(wifi_radio_obj_t *self) { if (!esp_netif_is_netif_up(self->netif)) { return mp_const_none; diff --git a/shared-bindings/wifi/Radio.c b/shared-bindings/wifi/Radio.c index 928f21da9..6f1935191 100644 --- a/shared-bindings/wifi/Radio.c +++ b/shared-bindings/wifi/Radio.c @@ -163,6 +163,47 @@ STATIC mp_obj_t wifi_radio_connect(size_t n_args, const mp_obj_t *pos_args, mp_m } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(wifi_radio_connect_obj, 1, wifi_radio_connect); +//| ap_rssi: int +//| """RSSI of the currently connected AP. Returns none if not connected""" +//| +STATIC mp_obj_t wifi_radio_get_ap_rssi(mp_obj_t self) { + return common_hal_wifi_radio_get_ap_rssi(self); + +} +MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_rssi_obj, wifi_radio_get_ap_rssi); + +//| ipv4_gateway: Optional[ipaddress.IPv4Address] +//| """IP v4 Address of the gateway when connected to an access point. None otherwise.""" +//| +STATIC mp_obj_t wifi_radio_get_ipv4_gateway(mp_obj_t self) { + return common_hal_wifi_radio_get_ipv4_gateway(self); + +} +MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ipv4_gateway_obj, wifi_radio_get_ipv4_gateway); + +const mp_obj_property_t wifi_radio_ipv4_gateway_obj = { + .base.type = &mp_type_property, + .proxy = { (mp_obj_t)&wifi_radio_get_ipv4_gateway_obj, + (mp_obj_t)&mp_const_none_obj, + (mp_obj_t)&mp_const_none_obj }, +}; + +//| ipv4_subnet: Optional[ipaddress.IPv4Address] +//| """IP v4 Address of the subnet when connected to an access point. None otherwise.""" +//| +STATIC mp_obj_t wifi_radio_get_ipv4_subnet(mp_obj_t self) { + return common_hal_wifi_radio_get_ipv4_subnet(self); + +} +MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ipv4_subnet_obj, wifi_radio_get_ipv4_subnet); + +const mp_obj_property_t wifi_radio_ipv4_subnet_obj = { + .base.type = &mp_type_property, + .proxy = { (mp_obj_t)&wifi_radio_get_ipv4_subnet_obj, + (mp_obj_t)&mp_const_none_obj, + (mp_obj_t)&mp_const_none_obj }, +}; + //| ipv4_address: Optional[ipaddress.IPv4Address] //| """IP v4 Address of the radio when connected to an access point. None otherwise.""" //| @@ -219,6 +260,9 @@ STATIC const mp_rom_map_elem_t wifi_radio_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_connect), MP_ROM_PTR(&wifi_radio_connect_obj) }, // { MP_ROM_QSTR(MP_QSTR_connect_to_enterprise), MP_ROM_PTR(&wifi_radio_connect_to_enterprise_obj) }, + { MP_ROM_QSTR(MP_QSTR_ap_rssi), MP_ROM_PTR(&wifi_radio_get_ap_rssi_obj) }, + { MP_ROM_QSTR(MP_QSTR_ipv4_gateway), MP_ROM_PTR(&wifi_radio_ipv4_gateway_obj) }, + { MP_ROM_QSTR(MP_QSTR_ipv4_subnet), MP_ROM_PTR(&wifi_radio_ipv4_subnet_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_address), MP_ROM_PTR(&wifi_radio_ipv4_address_obj) }, // { MP_ROM_QSTR(MP_QSTR_access_point_active), MP_ROM_PTR(&wifi_radio_access_point_active_obj) }, diff --git a/shared-bindings/wifi/Radio.h b/shared-bindings/wifi/Radio.h index b5341d51c..3c8ecbebd 100644 --- a/shared-bindings/wifi/Radio.h +++ b/shared-bindings/wifi/Radio.h @@ -53,6 +53,9 @@ extern void common_hal_wifi_radio_stop_scanning_networks(wifi_radio_obj_t *self) extern wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t* ssid, size_t ssid_len, uint8_t* password, size_t password_len, uint8_t channel, mp_float_t timeout, uint8_t* bssid, size_t bssid_len); +extern mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self); +extern mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self); +extern mp_obj_t common_hal_wifi_radio_get_ipv4_subnet(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_address(wifi_radio_obj_t *self); extern mp_int_t common_hal_wifi_radio_ping(wifi_radio_obj_t *self, mp_obj_t ip_address, mp_float_t timeout); -- cgit v1.2.3 From bc8863a3c788c7a44c164e35c71a7ec83cf29823 Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Sat, 19 Sep 2020 21:04:07 -0700 Subject: Simplify now that I have it working still need to figure out the bound method business --- ports/esp32s2/common-hal/wifi/Radio.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index 4b2e7b64e..5bc69eab4 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -151,6 +151,7 @@ mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self) { if (!esp_netif_is_netif_up(self->netif)) { return mp_const_none; } + // Make sure the interface is in STA mode wifi_mode_t if_mode; esp_wifi_get_mode(&if_mode); @@ -161,10 +162,7 @@ mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self) { wifi_ap_record_t ap_info; esp_wifi_sta_get_ap_info(&ap_info); - mp_obj_t rssi; - rssi = MP_OBJ_NEW_SMALL_INT(ap_info.rssi); - - return rssi; + return MP_OBJ_NEW_SMALL_INT(ap_info.rssi); } mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self) { -- cgit v1.2.3 From 2fa269ccbc981c00eaf4f0bf6d7f5eaa52db4d08 Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Mon, 21 Sep 2020 20:56:03 -0700 Subject: Additional error handling --- ports/esp32s2/common-hal/wifi/Radio.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index 5bc69eab4..44f0fe2cf 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -160,9 +160,15 @@ mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self) { } wifi_ap_record_t ap_info; - esp_wifi_sta_get_ap_info(&ap_info); - - return MP_OBJ_NEW_SMALL_INT(ap_info.rssi); + // From esp_wifi.h, the possible return values (typos theirs): + // ESP_OK: succeed + // ESP_ERR_WIFI_CONN: The station interface don't initialized + // ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status + if (esp_wifi_sta_get_ap_info(&ap_info) != ESP_OK){ + return mp_const_none; + } else { + return mp_obj_new_int(ap_info.rssi); + } } mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self) { -- cgit v1.2.3 From a77966a73640a8699d116e0f484199338c4477e9 Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Mon, 21 Sep 2020 21:36:46 -0700 Subject: Try to reuse/share existing objects --- ports/esp32s2/common-hal/wifi/Radio.c | 24 +++++++++--------------- ports/esp32s2/common-hal/wifi/Radio.h | 2 ++ 2 files changed, 11 insertions(+), 15 deletions(-) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index 44f0fe2cf..ab6177859 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -153,21 +153,18 @@ mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self) { } // Make sure the interface is in STA mode - wifi_mode_t if_mode; - esp_wifi_get_mode(&if_mode); - if (if_mode != WIFI_MODE_STA){ + if (self->sta_mode){ return mp_const_none; } - wifi_ap_record_t ap_info; // From esp_wifi.h, the possible return values (typos theirs): // ESP_OK: succeed // ESP_ERR_WIFI_CONN: The station interface don't initialized // ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status - if (esp_wifi_sta_get_ap_info(&ap_info) != ESP_OK){ + if (esp_wifi_sta_get_ap_info(&self->ap_info) != ESP_OK){ return mp_const_none; } else { - return mp_obj_new_int(ap_info.rssi); + return mp_obj_new_int(self->ap_info.rssi); } } @@ -175,27 +172,24 @@ mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self) { if (!esp_netif_is_netif_up(self->netif)) { return mp_const_none; } - esp_netif_ip_info_t ip_info; - esp_netif_get_ip_info(self->netif, &ip_info); - return common_hal_ipaddress_new_ipv4address(ip_info.gw.addr); + esp_netif_get_ip_info(self->netif, &self->ip_info); + return common_hal_ipaddress_new_ipv4address(self->ip_info.gw.addr); } mp_obj_t common_hal_wifi_radio_get_ipv4_subnet(wifi_radio_obj_t *self) { if (!esp_netif_is_netif_up(self->netif)) { return mp_const_none; } - esp_netif_ip_info_t ip_info; - esp_netif_get_ip_info(self->netif, &ip_info); - return common_hal_ipaddress_new_ipv4address(ip_info.netmask.addr); + esp_netif_get_ip_info(self->netif, &self->ip_info); + return common_hal_ipaddress_new_ipv4address(self->ip_info.netmask.addr); } mp_obj_t common_hal_wifi_radio_get_ipv4_address(wifi_radio_obj_t *self) { if (!esp_netif_is_netif_up(self->netif)) { return mp_const_none; } - esp_netif_ip_info_t ip_info; - esp_netif_get_ip_info(self->netif, &ip_info); - return common_hal_ipaddress_new_ipv4address(ip_info.ip.addr); + esp_netif_get_ip_info(self->netif, &self->ip_info); + return common_hal_ipaddress_new_ipv4address(self->ip_info.ip.addr); } mp_int_t common_hal_wifi_radio_ping(wifi_radio_obj_t *self, mp_obj_t ip_address, mp_float_t timeout) { diff --git a/ports/esp32s2/common-hal/wifi/Radio.h b/ports/esp32s2/common-hal/wifi/Radio.h index 205aef176..ddcd9dc0d 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.h +++ b/ports/esp32s2/common-hal/wifi/Radio.h @@ -46,6 +46,8 @@ typedef struct { StaticEventGroup_t event_group; EventGroupHandle_t event_group_handle; wifi_config_t sta_config; + wifi_ap_record_t ap_info; + esp_netif_ip_info_t ip_info; esp_netif_t *netif; bool started; bool ap_mode; -- cgit v1.2.3 From deefeecb454931a1476be0f852b78dfea0975d92 Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Sat, 26 Sep 2020 14:27:42 -0700 Subject: Fix ap_rssi bound_method Forgot to make it a property! --- shared-bindings/wifi/Radio.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/shared-bindings/wifi/Radio.c b/shared-bindings/wifi/Radio.c index 6f1935191..6c4e6a4f6 100644 --- a/shared-bindings/wifi/Radio.c +++ b/shared-bindings/wifi/Radio.c @@ -172,6 +172,13 @@ STATIC mp_obj_t wifi_radio_get_ap_rssi(mp_obj_t self) { } MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_rssi_obj, wifi_radio_get_ap_rssi); +const mp_obj_property_t wifi_radio_ap_rssi_obj = { + .base.type = &mp_type_property, + .proxy = { (mp_obj_t)&wifi_radio_get_ap_rssi_obj, + (mp_obj_t)&mp_const_none_obj, + (mp_obj_t)&mp_const_none_obj }, +}; + //| ipv4_gateway: Optional[ipaddress.IPv4Address] //| """IP v4 Address of the gateway when connected to an access point. None otherwise.""" //| @@ -260,7 +267,7 @@ STATIC const mp_rom_map_elem_t wifi_radio_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_connect), MP_ROM_PTR(&wifi_radio_connect_obj) }, // { MP_ROM_QSTR(MP_QSTR_connect_to_enterprise), MP_ROM_PTR(&wifi_radio_connect_to_enterprise_obj) }, - { MP_ROM_QSTR(MP_QSTR_ap_rssi), MP_ROM_PTR(&wifi_radio_get_ap_rssi_obj) }, + { MP_ROM_QSTR(MP_QSTR_ap_rssi), MP_ROM_PTR(&wifi_radio_ap_rssi_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_gateway), MP_ROM_PTR(&wifi_radio_ipv4_gateway_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_subnet), MP_ROM_PTR(&wifi_radio_ipv4_subnet_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_address), MP_ROM_PTR(&wifi_radio_ipv4_address_obj) }, -- cgit v1.2.3 From 66d55738c1315b223d3e5ed6bc710f8b1e443836 Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Mon, 28 Sep 2020 16:49:20 -0700 Subject: Enable DNS info --- ports/esp32s2/common-hal/wifi/Radio.c | 14 ++++++++++++++ ports/esp32s2/common-hal/wifi/Radio.h | 1 + shared-bindings/wifi/Radio.c | 17 +++++++++++++++++ shared-bindings/wifi/Radio.h | 1 + 4 files changed, 33 insertions(+) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index ab6177859..0184793a1 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -192,6 +192,20 @@ mp_obj_t common_hal_wifi_radio_get_ipv4_address(wifi_radio_obj_t *self) { return common_hal_ipaddress_new_ipv4address(self->ip_info.ip.addr); } +mp_obj_t common_hal_wifi_radio_get_ipv4_dns(wifi_radio_obj_t *self) { + if (!esp_netif_is_netif_up(self->netif)) { + return mp_const_none; + } + + esp_netif_get_dns_info(self->netif, ESP_NETIF_DNS_MAIN, &self->dns_info); + + // dns_info is of type esp_netif_dns_info_t, which is just ever so slightly + // different than esp_netif_ip_info_t used for + // common_hal_wifi_radio_get_ipv4_address (includes both ipv4 and 6), + // so some extra jumping is required to get to the actual address + return common_hal_ipaddress_new_ipv4address(self->dns_info.ip.u_addr.ip4.addr); +} + mp_int_t common_hal_wifi_radio_ping(wifi_radio_obj_t *self, mp_obj_t ip_address, mp_float_t timeout) { esp_ping_config_t ping_config = ESP_PING_DEFAULT_CONFIG(); ipaddress_ipaddress_to_esp_idf(ip_address, &ping_config.target_addr); diff --git a/ports/esp32s2/common-hal/wifi/Radio.h b/ports/esp32s2/common-hal/wifi/Radio.h index ddcd9dc0d..7c0cb996d 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.h +++ b/ports/esp32s2/common-hal/wifi/Radio.h @@ -48,6 +48,7 @@ typedef struct { wifi_config_t sta_config; wifi_ap_record_t ap_info; esp_netif_ip_info_t ip_info; + esp_netif_dns_info_t dns_info; esp_netif_t *netif; bool started; bool ap_mode; diff --git a/shared-bindings/wifi/Radio.c b/shared-bindings/wifi/Radio.c index 6c4e6a4f6..8c556aafe 100644 --- a/shared-bindings/wifi/Radio.c +++ b/shared-bindings/wifi/Radio.c @@ -227,6 +227,22 @@ const mp_obj_property_t wifi_radio_ipv4_address_obj = { (mp_obj_t)&mp_const_none_obj }, }; +//| ipv4_dns: Optional[ipaddress.IPv4Address] +//| """IP v4 Address of the DNS server in use when connected to an access point. None otherwise.""" +//| +STATIC mp_obj_t wifi_radio_get_ipv4_dns(mp_obj_t self) { + return common_hal_wifi_radio_get_ipv4_dns(self); + +} +MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ipv4_dns_obj, wifi_radio_get_ipv4_dns); + +const mp_obj_property_t wifi_radio_ipv4_dns_obj = { + .base.type = &mp_type_property, + .proxy = { (mp_obj_t)&wifi_radio_get_ipv4_dns_obj, + (mp_obj_t)&mp_const_none_obj, + (mp_obj_t)&mp_const_none_obj }, +}; + //| def ping(self, ip, *, timeout: float = 0.5) -> float: //| """Ping an IP to test connectivity. Returns echo time in seconds. //| Returns None when it times out.""" @@ -268,6 +284,7 @@ STATIC const mp_rom_map_elem_t wifi_radio_locals_dict_table[] = { // { MP_ROM_QSTR(MP_QSTR_connect_to_enterprise), MP_ROM_PTR(&wifi_radio_connect_to_enterprise_obj) }, { MP_ROM_QSTR(MP_QSTR_ap_rssi), MP_ROM_PTR(&wifi_radio_ap_rssi_obj) }, + { MP_ROM_QSTR(MP_QSTR_ipv4_dns), MP_ROM_PTR(&wifi_radio_ipv4_dns_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_gateway), MP_ROM_PTR(&wifi_radio_ipv4_gateway_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_subnet), MP_ROM_PTR(&wifi_radio_ipv4_subnet_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_address), MP_ROM_PTR(&wifi_radio_ipv4_address_obj) }, diff --git a/shared-bindings/wifi/Radio.h b/shared-bindings/wifi/Radio.h index 3c8ecbebd..fd0807a86 100644 --- a/shared-bindings/wifi/Radio.h +++ b/shared-bindings/wifi/Radio.h @@ -54,6 +54,7 @@ extern void common_hal_wifi_radio_stop_scanning_networks(wifi_radio_obj_t *self) extern wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t* ssid, size_t ssid_len, uint8_t* password, size_t password_len, uint8_t channel, mp_float_t timeout, uint8_t* bssid, size_t bssid_len); extern mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self); +extern mp_obj_t common_hal_wifi_radio_get_ipv4_dns(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_subnet(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_address(wifi_radio_obj_t *self); -- cgit v1.2.3 From 2a4a244245e3e03bfb89dcc49e56e83b71291bb2 Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Mon, 28 Sep 2020 17:25:09 -0700 Subject: Add ap_ssid and ap_bssid --- ports/esp32s2/common-hal/wifi/Radio.c | 39 +++++++++++++++++++++++++++++++++-- shared-bindings/wifi/Radio.c | 34 ++++++++++++++++++++++++++++++ shared-bindings/wifi/Radio.h | 2 ++ 3 files changed, 73 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index 0184793a1..019e8316c 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -38,6 +38,8 @@ #include "esp-idf/components/esp_wifi/include/esp_wifi.h" #include "esp-idf/components/lwip/include/apps/ping/ping_sock.h" +#define MAC_ADDRESS_LENGTH 6 + static void start_station(wifi_radio_obj_t *self) { if (self->sta_mode) { return; @@ -73,8 +75,6 @@ void common_hal_wifi_radio_set_enabled(wifi_radio_obj_t *self, bool enabled) { } } -#define MAC_ADDRESS_LENGTH 6 - mp_obj_t common_hal_wifi_radio_get_mac_address(wifi_radio_obj_t *self) { uint8_t mac[MAC_ADDRESS_LENGTH]; esp_wifi_get_mac(ESP_IF_WIFI_STA, mac); @@ -168,6 +168,41 @@ mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self) { } } +mp_obj_t common_hal_wifi_radio_get_ap_ssid(wifi_radio_obj_t *self) { + if (!esp_netif_is_netif_up(self->netif)) { + return mp_const_none; + } + + // Make sure the interface is in STA mode + if (self->sta_mode){ + return mp_const_none; + } + + if (esp_wifi_sta_get_ap_info(&self->ap_info) != ESP_OK){ + return mp_const_none; + } else { + const char* cstr = (const char*) self->ap_info.ssid; + return mp_obj_new_str(cstr, strlen(cstr)); + } +} + +mp_obj_t common_hal_wifi_radio_get_ap_bssid(wifi_radio_obj_t *self) { + if (!esp_netif_is_netif_up(self->netif)) { + return mp_const_none; + } + + // Make sure the interface is in STA mode + if (self->sta_mode){ + return mp_const_none; + } + + if (esp_wifi_sta_get_ap_info(&self->ap_info) != ESP_OK){ + return mp_const_none; + } else { + return mp_obj_new_bytes(self->ap_info.bssid, MAC_ADDRESS_LENGTH); + } +} + mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self) { if (!esp_netif_is_netif_up(self->netif)) { return mp_const_none; diff --git a/shared-bindings/wifi/Radio.c b/shared-bindings/wifi/Radio.c index 8c556aafe..96abadf6f 100644 --- a/shared-bindings/wifi/Radio.c +++ b/shared-bindings/wifi/Radio.c @@ -179,6 +179,38 @@ const mp_obj_property_t wifi_radio_ap_rssi_obj = { (mp_obj_t)&mp_const_none_obj }, }; +//| ap_ssid: int +//| """SSID of the currently connected AP. Returns none if not connected""" +//| +STATIC mp_obj_t wifi_radio_get_ap_ssid(mp_obj_t self) { + return common_hal_wifi_radio_get_ap_ssid(self); + +} +MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_ssid_obj, wifi_radio_get_ap_ssid); + +const mp_obj_property_t wifi_radio_ap_ssid_obj = { + .base.type = &mp_type_property, + .proxy = { (mp_obj_t)&wifi_radio_get_ap_ssid_obj, + (mp_obj_t)&mp_const_none_obj, + (mp_obj_t)&mp_const_none_obj }, +}; + +//| ap_bssid: int +//| """BSSID (usually MAC) of the currently connected AP. Returns none if not connected""" +//| +STATIC mp_obj_t wifi_radio_get_ap_bssid(mp_obj_t self) { + return common_hal_wifi_radio_get_ap_bssid(self); + +} +MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_bssid_obj, wifi_radio_get_ap_bssid); + +const mp_obj_property_t wifi_radio_ap_bssid_obj = { + .base.type = &mp_type_property, + .proxy = { (mp_obj_t)&wifi_radio_get_ap_bssid_obj, + (mp_obj_t)&mp_const_none_obj, + (mp_obj_t)&mp_const_none_obj }, +}; + //| ipv4_gateway: Optional[ipaddress.IPv4Address] //| """IP v4 Address of the gateway when connected to an access point. None otherwise.""" //| @@ -284,6 +316,8 @@ STATIC const mp_rom_map_elem_t wifi_radio_locals_dict_table[] = { // { MP_ROM_QSTR(MP_QSTR_connect_to_enterprise), MP_ROM_PTR(&wifi_radio_connect_to_enterprise_obj) }, { MP_ROM_QSTR(MP_QSTR_ap_rssi), MP_ROM_PTR(&wifi_radio_ap_rssi_obj) }, + { MP_ROM_QSTR(MP_QSTR_ap_ssid), MP_ROM_PTR(&wifi_radio_ap_ssid_obj) }, + { MP_ROM_QSTR(MP_QSTR_ap_bssid), MP_ROM_PTR(&wifi_radio_ap_bssid_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_dns), MP_ROM_PTR(&wifi_radio_ipv4_dns_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_gateway), MP_ROM_PTR(&wifi_radio_ipv4_gateway_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_subnet), MP_ROM_PTR(&wifi_radio_ipv4_subnet_obj) }, diff --git a/shared-bindings/wifi/Radio.h b/shared-bindings/wifi/Radio.h index fd0807a86..bf30ac340 100644 --- a/shared-bindings/wifi/Radio.h +++ b/shared-bindings/wifi/Radio.h @@ -54,6 +54,8 @@ extern void common_hal_wifi_radio_stop_scanning_networks(wifi_radio_obj_t *self) extern wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t* ssid, size_t ssid_len, uint8_t* password, size_t password_len, uint8_t channel, mp_float_t timeout, uint8_t* bssid, size_t bssid_len); extern mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self); +extern mp_obj_t common_hal_wifi_radio_get_ap_ssid(wifi_radio_obj_t *self); +extern mp_obj_t common_hal_wifi_radio_get_ap_bssid(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_dns(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_subnet(wifi_radio_obj_t *self); -- cgit v1.2.3 From d6d02c67d2bcacaa02499930aabd76365797b108 Mon Sep 17 00:00:00 2001 From: Christian Walther Date: Mon, 28 Sep 2020 22:34:02 +0200 Subject: Fix inconsistent supervisor heap. When allocations were freed in a different order from the reverse of how they were allocated (leaving holes), the heap would get into an inconsistent state, eventually resulting in crashes. free_memory() relies on having allocations in order, but allocate_memory() did not guarantee that: It reused the first allocation with a NULL ptr without ensuring that it was between low_address and high_address. When it belongs to a hole in the allocated memory, such an allocation is not really free for reuse, because free_memory() still needs its length. Instead, explicitly mark allocations available for reuse with a special (invalid) value in the length field. Only allocations that lie between low_address and high_address are marked that way. --- supervisor/shared/memory.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/supervisor/shared/memory.c b/supervisor/shared/memory.c index 8ae8a1699..56c617b9c 100755 --- a/supervisor/shared/memory.c +++ b/supervisor/shared/memory.c @@ -33,6 +33,10 @@ #define CIRCUITPY_SUPERVISOR_ALLOC_COUNT (12) +// Using a zero length to mark an unused allocation makes the code a bit shorter (but makes it +// impossible to support zero-length allocations). +#define FREE 0 + static supervisor_allocation allocations[CIRCUITPY_SUPERVISOR_ALLOC_COUNT]; // We use uint32_t* to ensure word (4 byte) alignment. uint32_t* low_address; @@ -61,19 +65,23 @@ void free_memory(supervisor_allocation* allocation) { } if (allocation->ptr == high_address) { high_address += allocation->length / 4; + allocation->length = FREE; for (index++; index < CIRCUITPY_SUPERVISOR_ALLOC_COUNT; index++) { if (allocations[index].ptr != NULL) { break; } high_address += allocations[index].length / 4; + allocations[index].length = FREE; } } else if (allocation->ptr + allocation->length / 4 == low_address) { low_address = allocation->ptr; + allocation->length = FREE; for (index--; index >= 0; index--) { if (allocations[index].ptr != NULL) { break; } low_address -= allocations[index].length / 4; + allocations[index].length = FREE; } } else { // Freed memory isn't in the middle so skip updating bounds. The memory will be added to the @@ -99,7 +107,7 @@ supervisor_allocation* allocate_remaining_memory(void) { } supervisor_allocation* allocate_memory(uint32_t length, bool high) { - if ((high_address - low_address) * 4 < (int32_t) length || length % 4 != 0) { + if (length == 0 || (high_address - low_address) * 4 < (int32_t) length || length % 4 != 0) { return NULL; } uint8_t index = 0; @@ -109,7 +117,7 @@ supervisor_allocation* allocate_memory(uint32_t length, bool high) { direction = -1; } for (; index < CIRCUITPY_SUPERVISOR_ALLOC_COUNT; index += direction) { - if (allocations[index].ptr == NULL) { + if (allocations[index].length == FREE) { break; } } -- cgit v1.2.3 From 5bdb8c45dd2700941ab75661b773680bdd46aaf1 Mon Sep 17 00:00:00 2001 From: Christian Walther Date: Tue, 29 Sep 2020 22:21:29 +0200 Subject: Allow allocate_memory() to reuse holes when matching exactly. This requires recovering the pointer of the allocation, which could be done by adding up neighbor lengths, but the simpler way is to stop NULLing it out in the first place and instead mark an allocation as freed by the client by setting the lowest bit of the length (which is always zero in a valid length). --- supervisor/shared/memory.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) diff --git a/supervisor/shared/memory.c b/supervisor/shared/memory.c index 56c617b9c..fdb4e06fb 100755 --- a/supervisor/shared/memory.c +++ b/supervisor/shared/memory.c @@ -37,6 +37,10 @@ // impossible to support zero-length allocations). #define FREE 0 +// The lowest two bits of a valid length are always zero, so we can use them to mark an allocation +// as freed by the client but not yet reclaimed into the FREE middle. +#define HOLE 1 + static supervisor_allocation allocations[CIRCUITPY_SUPERVISOR_ALLOC_COUNT]; // We use uint32_t* to ensure word (4 byte) alignment. uint32_t* low_address; @@ -67,9 +71,10 @@ void free_memory(supervisor_allocation* allocation) { high_address += allocation->length / 4; allocation->length = FREE; for (index++; index < CIRCUITPY_SUPERVISOR_ALLOC_COUNT; index++) { - if (allocations[index].ptr != NULL) { + if (!(allocations[index].length & HOLE)) { break; } + // Division automatically shifts out the HOLE bit. high_address += allocations[index].length / 4; allocations[index].length = FREE; } @@ -77,7 +82,7 @@ void free_memory(supervisor_allocation* allocation) { low_address = allocation->ptr; allocation->length = FREE; for (index--; index >= 0; index--) { - if (allocations[index].ptr != NULL) { + if (!(allocations[index].length & HOLE)) { break; } low_address -= allocations[index].length / 4; @@ -85,9 +90,10 @@ void free_memory(supervisor_allocation* allocation) { } } else { // Freed memory isn't in the middle so skip updating bounds. The memory will be added to the - // middle when the memory to the inside is freed. + // middle when the memory to the inside is freed. We still need its length, but setting + // only the lowest bit is nondestructive. + allocation->length |= HOLE; } - allocation->ptr = NULL; } supervisor_allocation* allocation_from_ptr(void *ptr) { @@ -107,7 +113,7 @@ supervisor_allocation* allocate_remaining_memory(void) { } supervisor_allocation* allocate_memory(uint32_t length, bool high) { - if (length == 0 || (high_address - low_address) * 4 < (int32_t) length || length % 4 != 0) { + if (length == 0 || length % 4 != 0) { return NULL; } uint8_t index = 0; @@ -116,15 +122,21 @@ supervisor_allocation* allocate_memory(uint32_t length, bool high) { index = CIRCUITPY_SUPERVISOR_ALLOC_COUNT - 1; direction = -1; } + supervisor_allocation* alloc; for (; index < CIRCUITPY_SUPERVISOR_ALLOC_COUNT; index += direction) { - if (allocations[index].length == FREE) { + alloc = &allocations[index]; + if (alloc->length == FREE) { break; } + // If a hole matches in length exactly, we can reuse it. + if (alloc->length == (length | HOLE)) { + alloc->length = length; + return alloc; + } } - if (index >= CIRCUITPY_SUPERVISOR_ALLOC_COUNT) { + if (index >= CIRCUITPY_SUPERVISOR_ALLOC_COUNT || (high_address - low_address) * 4 < (int32_t) length) { return NULL; } - supervisor_allocation* alloc = &allocations[index]; if (high) { high_address -= length / 4; alloc->ptr = high_address; -- cgit v1.2.3 From be8092f4d32d06488df88294a9dc4bb809411c5e Mon Sep 17 00:00:00 2001 From: Christian Walther Date: Fri, 2 Oct 2020 23:07:07 +0200 Subject: When there is not enough free space, but a matching hole on the other side, use it. --- supervisor/shared/memory.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/supervisor/shared/memory.c b/supervisor/shared/memory.c index fdb4e06fb..0f96ae273 100755 --- a/supervisor/shared/memory.c +++ b/supervisor/shared/memory.c @@ -125,7 +125,7 @@ supervisor_allocation* allocate_memory(uint32_t length, bool high) { supervisor_allocation* alloc; for (; index < CIRCUITPY_SUPERVISOR_ALLOC_COUNT; index += direction) { alloc = &allocations[index]; - if (alloc->length == FREE) { + if (alloc->length == FREE && (high_address - low_address) * 4 >= (int32_t) length) { break; } // If a hole matches in length exactly, we can reuse it. @@ -134,7 +134,7 @@ supervisor_allocation* allocate_memory(uint32_t length, bool high) { return alloc; } } - if (index >= CIRCUITPY_SUPERVISOR_ALLOC_COUNT || (high_address - low_address) * 4 < (int32_t) length) { + if (index >= CIRCUITPY_SUPERVISOR_ALLOC_COUNT) { return NULL; } if (high) { -- cgit v1.2.3 From b9e308c248ec953ebd2fc8c16c03b2cc06cfafc5 Mon Sep 17 00:00:00 2001 From: Targett363 Date: Sat, 10 Oct 2020 21:11:06 +0100 Subject: Adding Wroom and Wrover board files --- .../boards/targett_module_clip_wroom/board.c | 51 ++++++++++++++++++++++ .../targett_module_clip_wroom/mpconfigboard.h | 40 +++++++++++++++++ .../targett_module_clip_wroom/mpconfigboard.mk | 17 ++++++++ .../boards/targett_module_clip_wroom/pins.c | 48 ++++++++++++++++++++ .../boards/targett_module_clip_wroom/sdkconfig | 0 .../boards/targett_module_clip_wrover/board.c | 47 ++++++++++++++++++++ .../targett_module_clip_wrover/mpconfigboard.h | 38 ++++++++++++++++ .../targett_module_clip_wrover/mpconfigboard.mk | 17 ++++++++ .../boards/targett_module_clip_wrover/pins.c | 48 ++++++++++++++++++++ .../boards/targett_module_clip_wrover/sdkconfig | 33 ++++++++++++++ 10 files changed, 339 insertions(+) create mode 100644 ports/esp32s2/boards/targett_module_clip_wroom/board.c create mode 100644 ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h create mode 100644 ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk create mode 100644 ports/esp32s2/boards/targett_module_clip_wroom/pins.c create mode 100644 ports/esp32s2/boards/targett_module_clip_wroom/sdkconfig create mode 100644 ports/esp32s2/boards/targett_module_clip_wrover/board.c create mode 100644 ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h create mode 100644 ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk create mode 100644 ports/esp32s2/boards/targett_module_clip_wrover/pins.c create mode 100644 ports/esp32s2/boards/targett_module_clip_wrover/sdkconfig diff --git a/ports/esp32s2/boards/targett_module_clip_wroom/board.c b/ports/esp32s2/boards/targett_module_clip_wroom/board.c new file mode 100644 index 000000000..7f5de0e0d --- /dev/null +++ b/ports/esp32s2/boards/targett_module_clip_wroom/board.c @@ -0,0 +1,51 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" +#include "shared-bindings/microcontroller/Pin.h" + +void board_init(void) { + // USB + common_hal_never_reset_pin(&pin_GPIO19); + common_hal_never_reset_pin(&pin_GPIO20); + + // Debug UART + common_hal_never_reset_pin(&pin_GPIO43); + common_hal_never_reset_pin(&pin_GPIO44); + + // Crystal + common_hal_never_reset_pin(&pin_GPIO15); + common_hal_never_reset_pin(&pin_GPIO16); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h new file mode 100644 index 000000000..6cf69138e --- /dev/null +++ b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -0,0 +1,40 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +//Micropython setup + +//Essentially the same as the Saola board but without the neopixel + +#define MICROPY_HW_BOARD_NAME "Targett Module Clip w/Wroom" +#define MICROPY_HW_MCU_NAME "ESP32S2" + +//#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) + +#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) + +#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n") + +#define AUTORESET_DELAY_MS 500 diff --git a/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk new file mode 100644 index 000000000..71793344e --- /dev/null +++ b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk @@ -0,0 +1,17 @@ +USB_VID = 0x239A +USB_PID = 0x80A8 +USB_PRODUCT = "Targett Module Clip w/WROOM" +USB_MANUFACTURER = "Targett" + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = MPZ + +# The default queue depth of 16 overflows on release builds, +# so increase it to 32. +CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32 + +CIRCUITPY_ESP_FLASH_MODE=dio +CIRCUITPY_ESP_FLASH_FREQ=40m +CIRCUITPY_ESP_FLASH_SIZE=4MB + +CIRCUITPY_MODULE=wroom diff --git a/ports/esp32s2/boards/targett_module_clip_wroom/pins.c b/ports/esp32s2/boards/targett_module_clip_wroom/pins.c new file mode 100644 index 000000000..99db09645 --- /dev/null +++ b/ports/esp32s2/boards/targett_module_clip_wroom/pins.c @@ -0,0 +1,48 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) }, + { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) }, + { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) }, + + + { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) }, + { MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) }, + { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_IO26), MP_ROM_PTR(&pin_GPIO26) }, + { MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_IO34), MP_ROM_PTR(&pin_GPIO34) }, + { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) }, + { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) }, + { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) }, + { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) }, + { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) }, + { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) }, + { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) }, + { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) }, + { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) }, + { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) }, + { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) }, + { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) }, + + //{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO18) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/targett_module_clip_wroom/sdkconfig b/ports/esp32s2/boards/targett_module_clip_wroom/sdkconfig new file mode 100644 index 000000000..e69de29bb diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/board.c b/ports/esp32s2/boards/targett_module_clip_wrover/board.c new file mode 100644 index 000000000..9f708874b --- /dev/null +++ b/ports/esp32s2/boards/targett_module_clip_wrover/board.c @@ -0,0 +1,47 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" +#include "shared-bindings/microcontroller/Pin.h" + +void board_init(void) { + // USB + common_hal_never_reset_pin(&pin_GPIO19); + common_hal_never_reset_pin(&pin_GPIO20); + + // Debug UART + common_hal_never_reset_pin(&pin_GPIO43); + common_hal_never_reset_pin(&pin_GPIO44); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h new file mode 100644 index 000000000..961522891 --- /dev/null +++ b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +//Micropython setup + +#define MICROPY_HW_BOARD_NAME "Saola 1 w/Wrover" +#define MICROPY_HW_MCU_NAME "ESP32S2" + +#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) + +#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) + +#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n") + +#define AUTORESET_DELAY_MS 500 diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk new file mode 100644 index 000000000..d5ff1c5ac --- /dev/null +++ b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk @@ -0,0 +1,17 @@ +USB_VID = 0x239A +USB_PID = 0x80A6 +USB_PRODUCT = "Saola 1 w/WROVER" +USB_MANUFACTURER = "Espressif" + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = MPZ + +# The default queue depth of 16 overflows on release builds, +# so increase it to 32. +CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32 + +CIRCUITPY_ESP_FLASH_MODE=dio +CIRCUITPY_ESP_FLASH_FREQ=40m +CIRCUITPY_ESP_FLASH_SIZE=4MB + +CIRCUITPY_MODULE=wrover diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/pins.c b/ports/esp32s2/boards/targett_module_clip_wrover/pins.c new file mode 100644 index 000000000..0562d9331 --- /dev/null +++ b/ports/esp32s2/boards/targett_module_clip_wrover/pins.c @@ -0,0 +1,48 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) }, + { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) }, + { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) }, + + + { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) }, + { MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) }, + { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_IO26), MP_ROM_PTR(&pin_GPIO26) }, + { MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_IO34), MP_ROM_PTR(&pin_GPIO34) }, + { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) }, + { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) }, + { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) }, + { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) }, + { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) }, + { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) }, + { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) }, + { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) }, + { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) }, + { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) }, + { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) }, + { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO18) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/sdkconfig b/ports/esp32s2/boards/targett_module_clip_wrover/sdkconfig new file mode 100644 index 000000000..9d8bbde96 --- /dev/null +++ b/ports/esp32s2/boards/targett_module_clip_wrover/sdkconfig @@ -0,0 +1,33 @@ +CONFIG_ESP32S2_SPIRAM_SUPPORT=y + +# +# SPI RAM config +# +# CONFIG_SPIRAM_TYPE_AUTO is not set +CONFIG_SPIRAM_TYPE_ESPPSRAM16=y +# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set +# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set +CONFIG_SPIRAM_SIZE=2097152 + +# +# PSRAM clock and cs IO for ESP32S2 +# +CONFIG_DEFAULT_PSRAM_CLK_IO=30 +CONFIG_DEFAULT_PSRAM_CS_IO=26 +# end of PSRAM clock and cs IO for ESP32S2 + +# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set +# CONFIG_SPIRAM_RODATA is not set +# CONFIG_SPIRAM_SPEED_80M is not set +CONFIG_SPIRAM_SPEED_40M=y +# CONFIG_SPIRAM_SPEED_26M is not set +# CONFIG_SPIRAM_SPEED_20M is not set +CONFIG_SPIRAM=y +CONFIG_SPIRAM_BOOT_INIT=y +# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set +CONFIG_SPIRAM_USE_MEMMAP=y +# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set +# CONFIG_SPIRAM_USE_MALLOC is not set +CONFIG_SPIRAM_MEMTEST=y +# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set +# end of SPI RAM config -- cgit v1.2.3 From f38e868e90fb467cf0f910e4990ffacba07abefb Mon Sep 17 00:00:00 2001 From: Targett363 Date: Sat, 10 Oct 2020 21:28:26 +0100 Subject: Actually adding Wrover board files this time --- ports/esp32s2/boards/espressif_saola_1_wrover/board.c | 4 ++++ ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h | 6 ++++-- ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.mk | 4 ++-- 3 files changed, 10 insertions(+), 4 deletions(-) diff --git a/ports/esp32s2/boards/espressif_saola_1_wrover/board.c b/ports/esp32s2/boards/espressif_saola_1_wrover/board.c index 9f708874b..83dcb920a 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wrover/board.c +++ b/ports/esp32s2/boards/espressif_saola_1_wrover/board.c @@ -36,6 +36,10 @@ void board_init(void) { // Debug UART common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); + + //Crystal + common_hal_never_reset_pin(&pin_GPIO15); + common_hal_never_reset_pin(&pin_GPIO16); } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h index 961522891..3c74d27fa 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +++ b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h @@ -26,10 +26,12 @@ //Micropython setup -#define MICROPY_HW_BOARD_NAME "Saola 1 w/Wrover" +//Same setup as the Saola board but with no Neopixel on board + +#define MICROPY_HW_BOARD_NAME "Targett Module Clip w/Wrover" #define MICROPY_HW_MCU_NAME "ESP32S2" -#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) +//#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) diff --git a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.mk b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.mk index d5ff1c5ac..4b70f4a68 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.mk +++ b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.mk @@ -1,7 +1,7 @@ USB_VID = 0x239A USB_PID = 0x80A6 -USB_PRODUCT = "Saola 1 w/WROVER" -USB_MANUFACTURER = "Espressif" +USB_PRODUCT = "Targett Module Clip w/WROVER" +USB_MANUFACTURER = "Targett" INTERNAL_FLASH_FILESYSTEM = 1 LONGINT_IMPL = MPZ -- cgit v1.2.3 From 74954286f09b2fc861db759232569520552f7cd8 Mon Sep 17 00:00:00 2001 From: Targett363 Date: Sat, 10 Oct 2020 21:44:14 +0100 Subject: Putting the Saola Wrover files back and adding my Wrover board files this time --- ports/esp32s2/boards/espressif_saola_1_wrover/board.c | 4 ---- ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h | 6 ++---- ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.mk | 4 ++-- ports/esp32s2/boards/targett_module_clip_wrover/board.c | 4 ++++ ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h | 6 ++++-- ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk | 4 ++-- 6 files changed, 14 insertions(+), 14 deletions(-) diff --git a/ports/esp32s2/boards/espressif_saola_1_wrover/board.c b/ports/esp32s2/boards/espressif_saola_1_wrover/board.c index 83dcb920a..9f708874b 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wrover/board.c +++ b/ports/esp32s2/boards/espressif_saola_1_wrover/board.c @@ -36,10 +36,6 @@ void board_init(void) { // Debug UART common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); - - //Crystal - common_hal_never_reset_pin(&pin_GPIO15); - common_hal_never_reset_pin(&pin_GPIO16); } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h index 3c74d27fa..961522891 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +++ b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h @@ -26,12 +26,10 @@ //Micropython setup -//Same setup as the Saola board but with no Neopixel on board - -#define MICROPY_HW_BOARD_NAME "Targett Module Clip w/Wrover" +#define MICROPY_HW_BOARD_NAME "Saola 1 w/Wrover" #define MICROPY_HW_MCU_NAME "ESP32S2" -//#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) +#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) diff --git a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.mk b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.mk index 4b70f4a68..d5ff1c5ac 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.mk +++ b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.mk @@ -1,7 +1,7 @@ USB_VID = 0x239A USB_PID = 0x80A6 -USB_PRODUCT = "Targett Module Clip w/WROVER" -USB_MANUFACTURER = "Targett" +USB_PRODUCT = "Saola 1 w/WROVER" +USB_MANUFACTURER = "Espressif" INTERNAL_FLASH_FILESYSTEM = 1 LONGINT_IMPL = MPZ diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/board.c b/ports/esp32s2/boards/targett_module_clip_wrover/board.c index 9f708874b..83dcb920a 100644 --- a/ports/esp32s2/boards/targett_module_clip_wrover/board.c +++ b/ports/esp32s2/boards/targett_module_clip_wrover/board.c @@ -36,6 +36,10 @@ void board_init(void) { // Debug UART common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); + + //Crystal + common_hal_never_reset_pin(&pin_GPIO15); + common_hal_never_reset_pin(&pin_GPIO16); } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h index 961522891..3c74d27fa 100644 --- a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h +++ b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h @@ -26,10 +26,12 @@ //Micropython setup -#define MICROPY_HW_BOARD_NAME "Saola 1 w/Wrover" +//Same setup as the Saola board but with no Neopixel on board + +#define MICROPY_HW_BOARD_NAME "Targett Module Clip w/Wrover" #define MICROPY_HW_MCU_NAME "ESP32S2" -#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) +//#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk index d5ff1c5ac..4b70f4a68 100644 --- a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk +++ b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk @@ -1,7 +1,7 @@ USB_VID = 0x239A USB_PID = 0x80A6 -USB_PRODUCT = "Saola 1 w/WROVER" -USB_MANUFACTURER = "Espressif" +USB_PRODUCT = "Targett Module Clip w/WROVER" +USB_MANUFACTURER = "Targett" INTERNAL_FLASH_FILESYSTEM = 1 LONGINT_IMPL = MPZ -- cgit v1.2.3 From cd935346ec8afe93a89d3a858acad1da77245916 Mon Sep 17 00:00:00 2001 From: Targett363 Date: Sat, 10 Oct 2020 22:11:44 +0100 Subject: Updating the build.yml to include both Module Clip boards --- .github/workflows/build.yml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index eaecd2fa4..af006756e 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -422,6 +422,8 @@ jobs: - "espressif_saola_1_wrover" - "microdev_micro_s2" - "muselab_nanoesp32_s2" + - "targett_module_clip_wrooom" + - "targett_module_clip_wrover" - "unexpectedmaker_feathers2" - "unexpectedmaker_feathers2_prerelease" -- cgit v1.2.3 From ead0d51fd711d38bab8dc7cff8373b6fdd60a180 Mon Sep 17 00:00:00 2001 From: Targett363 Date: Sat, 10 Oct 2020 22:22:01 +0100 Subject: Commenting out Neopixel in pins.c --- ports/esp32s2/boards/targett_module_clip_wrover/pins.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/pins.c b/ports/esp32s2/boards/targett_module_clip_wrover/pins.c index 0562d9331..99db09645 100644 --- a/ports/esp32s2/boards/targett_module_clip_wrover/pins.c +++ b/ports/esp32s2/boards/targett_module_clip_wrover/pins.c @@ -43,6 +43,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) }, { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) }, - { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO18) }, + //{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO18) }, }; MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); -- cgit v1.2.3 From 2aee2b7dc7c11eaf44603e726683a66bf47f0ec5 Mon Sep 17 00:00:00 2001 From: Targett363 Date: Sat, 10 Oct 2020 22:33:52 +0100 Subject: Corecting spelling mistake in build.yml --- .github/workflows/build.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index af006756e..4802335b5 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -422,7 +422,7 @@ jobs: - "espressif_saola_1_wrover" - "microdev_micro_s2" - "muselab_nanoesp32_s2" - - "targett_module_clip_wrooom" + - "targett_module_clip_wroom" - "targett_module_clip_wrover" - "unexpectedmaker_feathers2" - "unexpectedmaker_feathers2_prerelease" -- cgit v1.2.3 From 5721cf0710202294476c83500394a8dbd1c20d5b Mon Sep 17 00:00:00 2001 From: Targett363 Date: Sat, 10 Oct 2020 22:42:24 +0100 Subject: tidying up board names --- ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk | 2 +- ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk index 71793344e..580caa71b 100644 --- a/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk +++ b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk @@ -1,6 +1,6 @@ USB_VID = 0x239A USB_PID = 0x80A8 -USB_PRODUCT = "Targett Module Clip w/WROOM" +USB_PRODUCT = "Targett Module Clip w/Wroom" USB_MANUFACTURER = "Targett" INTERNAL_FLASH_FILESYSTEM = 1 diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk index 4b70f4a68..6832d2101 100644 --- a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk +++ b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk @@ -1,6 +1,6 @@ USB_VID = 0x239A USB_PID = 0x80A6 -USB_PRODUCT = "Targett Module Clip w/WROVER" +USB_PRODUCT = "Targett Module Clip w/Wrover" USB_MANUFACTURER = "Targett" INTERNAL_FLASH_FILESYSTEM = 1 -- cgit v1.2.3 From 60deb321d1801ad86c9dfcfc09fd4c69eec1ef06 Mon Sep 17 00:00:00 2001 From: Targett363 Date: Sat, 10 Oct 2020 23:55:05 +0100 Subject: adding USB PID VID --- ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk | 4 ++-- ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk index 580caa71b..e307d7d62 100644 --- a/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk +++ b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk @@ -1,5 +1,5 @@ -USB_VID = 0x239A -USB_PID = 0x80A8 +USB_VID = 0x1209 +USB_PID = 0x0011 USB_PRODUCT = "Targett Module Clip w/Wroom" USB_MANUFACTURER = "Targett" diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk index 6832d2101..aff5ffd6c 100644 --- a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk +++ b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk @@ -1,5 +1,5 @@ -USB_VID = 0x239A -USB_PID = 0x80A6 +USB_VID = 0x1209 +USB_PID = 0x0012 USB_PRODUCT = "Targett Module Clip w/Wrover" USB_MANUFACTURER = "Targett" -- cgit v1.2.3 From 57b44928a38b5a2328e0fd4fe8f2baee11062229 Mon Sep 17 00:00:00 2001 From: Jensen Date: Thu, 8 Oct 2020 21:40:55 -0500 Subject: displayio: Pass transparent_color to ColorConverter Signed-off-by: Jensen --- shared-bindings/displayio/ColorConverter.c | 5 ++++- shared-bindings/displayio/ColorConverter.h | 2 +- shared-module/displayio/ColorConverter.c | 12 +++++++++++- shared-module/displayio/ColorConverter.h | 1 + 4 files changed, 17 insertions(+), 3 deletions(-) diff --git a/shared-bindings/displayio/ColorConverter.c b/shared-bindings/displayio/ColorConverter.c index a2b6699ef..d2cbcfc73 100644 --- a/shared-bindings/displayio/ColorConverter.c +++ b/shared-bindings/displayio/ColorConverter.c @@ -43,6 +43,7 @@ //| """Create a ColorConverter object to convert color formats. Only supports RGB888 to RGB565 //| currently. //| :param bool dither: Adds random noise to dither the output image""" +//| :param bool transparent_color: Sets one color in the colorset to transparent""" //| ... //| @@ -50,9 +51,11 @@ //| STATIC mp_obj_t displayio_colorconverter_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_dither}; + enum { ARG_transparent_color }; static const mp_arg_t allowed_args[] = { { MP_QSTR_dither, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} }, + { MP_QSTR_transparent_color, MP_ARG_KW_ONLY | MP_ARG_INT, {.uint32_t = 0} }, }; mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); @@ -60,7 +63,7 @@ STATIC mp_obj_t displayio_colorconverter_make_new(const mp_obj_type_t *type, siz displayio_colorconverter_t *self = m_new_obj(displayio_colorconverter_t); self->base.type = &displayio_colorconverter_type; - common_hal_displayio_colorconverter_construct(self, args[ARG_dither].u_bool); + common_hal_displayio_colorconverter_construct(self, args[ARG_dither].u_bool, args[ARG_transparent_color].uint32_t); return MP_OBJ_FROM_PTR(self); } diff --git a/shared-bindings/displayio/ColorConverter.h b/shared-bindings/displayio/ColorConverter.h index d550d81be..146ad80bd 100644 --- a/shared-bindings/displayio/ColorConverter.h +++ b/shared-bindings/displayio/ColorConverter.h @@ -33,7 +33,7 @@ extern const mp_obj_type_t displayio_colorconverter_type; -void common_hal_displayio_colorconverter_construct(displayio_colorconverter_t* self, bool dither); +void common_hal_displayio_colorconverter_construct(displayio_colorconverter_t* self, bool dither, uint32_t transparent_color); void common_hal_displayio_colorconverter_convert(displayio_colorconverter_t *colorconverter, const _displayio_colorspace_t* colorspace, uint32_t input_color, uint32_t* output_color); void common_hal_displayio_colorconverter_set_dither(displayio_colorconverter_t* self, bool dither); diff --git a/shared-module/displayio/ColorConverter.c b/shared-module/displayio/ColorConverter.c index c2c3214aa..c23286d04 100644 --- a/shared-module/displayio/ColorConverter.c +++ b/shared-module/displayio/ColorConverter.c @@ -39,8 +39,9 @@ uint32_t displayio_colorconverter_dither_noise_2(uint32_t x, uint32_t y) { return displayio_colorconverter_dither_noise_1(x + y * 0xFFFF); } -void common_hal_displayio_colorconverter_construct(displayio_colorconverter_t* self, bool dither) { +void common_hal_displayio_colorconverter_construct(displayio_colorconverter_t* self, bool dither, uint32_t transparent_color) { self->dither = dither; + self->transparent_color = transparent_color; } uint16_t displayio_colorconverter_compute_rgb565(uint32_t color_rgb888) { @@ -161,6 +162,9 @@ void displayio_colorconverter_convert(displayio_colorconverter_t *self, const _d } output_color->pixel = packed; output_color->opaque = true; + if (self->transparent_color == pixel) { + output_color->opaque = false; + } return; } else if (colorspace->tricolor) { uint8_t luma = displayio_colorconverter_compute_luma(pixel); @@ -170,6 +174,9 @@ void displayio_colorconverter_convert(displayio_colorconverter_t *self, const _d output_color->pixel = 0; } output_color->opaque = true; + if (self->transparent_color == pixel) { + output_color->opaque = false; + } return; } uint8_t pixel_hue = displayio_colorconverter_compute_hue(pixel); @@ -179,6 +186,9 @@ void displayio_colorconverter_convert(displayio_colorconverter_t *self, const _d uint8_t luma = displayio_colorconverter_compute_luma(pixel); output_color->pixel = luma >> (8 - colorspace->depth); output_color->opaque = true; + if (self->transparent_color == pixel) { + output_color->opaque = false; + } return; } output_color->opaque = false; diff --git a/shared-module/displayio/ColorConverter.h b/shared-module/displayio/ColorConverter.h index 10b1604a4..b402625ef 100644 --- a/shared-module/displayio/ColorConverter.h +++ b/shared-module/displayio/ColorConverter.h @@ -36,6 +36,7 @@ typedef struct { mp_obj_base_t base; bool dither; + uint32_t transparent_color; } displayio_colorconverter_t; bool displayio_colorconverter_needs_refresh(displayio_colorconverter_t *self); -- cgit v1.2.3 From b359e2945ac9914c31afc7e692a4f46a837a854d Mon Sep 17 00:00:00 2001 From: Jensen Date: Sun, 11 Oct 2020 13:18:09 -0500 Subject: displayio: Add make_transparent and make_opaque to ColorConvertor --- shared-bindings/displayio/ColorConverter.c | 7 ++----- shared-bindings/displayio/ColorConverter.h | 5 ++++- shared-module/displayio/ColorConverter.c | 29 ++++++++++++++++++----------- 3 files changed, 24 insertions(+), 17 deletions(-) diff --git a/shared-bindings/displayio/ColorConverter.c b/shared-bindings/displayio/ColorConverter.c index d2cbcfc73..c02dfdb6d 100644 --- a/shared-bindings/displayio/ColorConverter.c +++ b/shared-bindings/displayio/ColorConverter.c @@ -43,7 +43,6 @@ //| """Create a ColorConverter object to convert color formats. Only supports RGB888 to RGB565 //| currently. //| :param bool dither: Adds random noise to dither the output image""" -//| :param bool transparent_color: Sets one color in the colorset to transparent""" //| ... //| @@ -51,11 +50,9 @@ //| STATIC mp_obj_t displayio_colorconverter_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_dither}; - enum { ARG_transparent_color }; static const mp_arg_t allowed_args[] = { - { MP_QSTR_dither, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} }, - { MP_QSTR_transparent_color, MP_ARG_KW_ONLY | MP_ARG_INT, {.uint32_t = 0} }, + { MP_QSTR_dither, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} } }; mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); @@ -63,7 +60,7 @@ STATIC mp_obj_t displayio_colorconverter_make_new(const mp_obj_type_t *type, siz displayio_colorconverter_t *self = m_new_obj(displayio_colorconverter_t); self->base.type = &displayio_colorconverter_type; - common_hal_displayio_colorconverter_construct(self, args[ARG_dither].u_bool, args[ARG_transparent_color].uint32_t); + common_hal_displayio_colorconverter_construct(self, args[ARG_dither].u_bool); return MP_OBJ_FROM_PTR(self); } diff --git a/shared-bindings/displayio/ColorConverter.h b/shared-bindings/displayio/ColorConverter.h index 146ad80bd..441f7c7ae 100644 --- a/shared-bindings/displayio/ColorConverter.h +++ b/shared-bindings/displayio/ColorConverter.h @@ -33,10 +33,13 @@ extern const mp_obj_type_t displayio_colorconverter_type; -void common_hal_displayio_colorconverter_construct(displayio_colorconverter_t* self, bool dither, uint32_t transparent_color); +void common_hal_displayio_colorconverter_construct(displayio_colorconverter_t* self, bool dither); void common_hal_displayio_colorconverter_convert(displayio_colorconverter_t *colorconverter, const _displayio_colorspace_t* colorspace, uint32_t input_color, uint32_t* output_color); void common_hal_displayio_colorconverter_set_dither(displayio_colorconverter_t* self, bool dither); bool common_hal_displayio_colorconverter_get_dither(displayio_colorconverter_t* self); +void common_hal_displayio_colorconverter_make_transparent(displayio_colorconverter_t* self, uint32_t transparent_color); +void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self, uint32_t transparent_color); + #endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_COLORCONVERTER_H diff --git a/shared-module/displayio/ColorConverter.c b/shared-module/displayio/ColorConverter.c index c23286d04..0a1a7dc06 100644 --- a/shared-module/displayio/ColorConverter.c +++ b/shared-module/displayio/ColorConverter.c @@ -39,9 +39,8 @@ uint32_t displayio_colorconverter_dither_noise_2(uint32_t x, uint32_t y) { return displayio_colorconverter_dither_noise_1(x + y * 0xFFFF); } -void common_hal_displayio_colorconverter_construct(displayio_colorconverter_t* self, bool dither, uint32_t transparent_color) { +void common_hal_displayio_colorconverter_construct(displayio_colorconverter_t* self, bool dither) { self->dither = dither; - self->transparent_color = transparent_color; } uint16_t displayio_colorconverter_compute_rgb565(uint32_t color_rgb888) { @@ -129,9 +128,26 @@ bool common_hal_displayio_colorconverter_get_dither(displayio_colorconverter_t* return self->dither; } +void common_hal_displayio_colorconverter_make_transparent(displayio_colorconverter_t* self, uint32_t transparent_color) { + self->transparent_color = transparent_color; + // TODO: Does this require refreshing like the other modules? +} + +void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self, uint32_t transparent_color) { + if (self->transparent_color == transparent_color) { + m_del(uint8_t, self, transparent_color); + } + // TODO: Does this require refreshing like the other modules? +} + void displayio_colorconverter_convert(displayio_colorconverter_t *self, const _displayio_colorspace_t* colorspace, const displayio_input_pixel_t *input_pixel, displayio_output_pixel_t *output_color) { uint32_t pixel = input_pixel->pixel; + if (self->transparent_color == pixel) { + output_color->opaque = false; + return; + } + if (self->dither){ uint8_t randr = (displayio_colorconverter_dither_noise_2(input_pixel->tile_x,input_pixel->tile_y)); uint8_t randg = (displayio_colorconverter_dither_noise_2(input_pixel->tile_x+33,input_pixel->tile_y)); @@ -162,9 +178,6 @@ void displayio_colorconverter_convert(displayio_colorconverter_t *self, const _d } output_color->pixel = packed; output_color->opaque = true; - if (self->transparent_color == pixel) { - output_color->opaque = false; - } return; } else if (colorspace->tricolor) { uint8_t luma = displayio_colorconverter_compute_luma(pixel); @@ -174,9 +187,6 @@ void displayio_colorconverter_convert(displayio_colorconverter_t *self, const _d output_color->pixel = 0; } output_color->opaque = true; - if (self->transparent_color == pixel) { - output_color->opaque = false; - } return; } uint8_t pixel_hue = displayio_colorconverter_compute_hue(pixel); @@ -186,9 +196,6 @@ void displayio_colorconverter_convert(displayio_colorconverter_t *self, const _d uint8_t luma = displayio_colorconverter_compute_luma(pixel); output_color->pixel = luma >> (8 - colorspace->depth); output_color->opaque = true; - if (self->transparent_color == pixel) { - output_color->opaque = false; - } return; } output_color->opaque = false; -- cgit v1.2.3 From 337019626a8cd0632cd2a6f6bae4ae09ae26cf16 Mon Sep 17 00:00:00 2001 From: Jensen Date: Sun, 11 Oct 2020 17:29:16 -0500 Subject: displayio: Add make_transparent to ColorConverter --- locale/circuitpython.pot | 24 +++++++++++++++++++--- shared-bindings/displayio/ColorConverter.c | 32 ++++++++++++++++++++++++++++++ shared-module/displayio/ColorConverter.c | 12 +++++++---- 3 files changed, 61 insertions(+), 7 deletions(-) diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index c4951f78f..081e2df9f 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-29 20:14-0500\n" +"POT-Creation-Date: 2020-10-12 20:47-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -285,6 +285,7 @@ msgid "All I2C peripherals are in use" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -892,6 +893,7 @@ msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -928,7 +930,8 @@ msgid "Group full" msgstr "" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "" @@ -998,7 +1001,8 @@ msgid "Invalid %q pin" msgstr "" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -3144,6 +3148,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h @@ -3151,6 +3156,7 @@ msgstr "" #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" msgstr "" @@ -3388,6 +3394,18 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: shared-bindings/displayio/ColorConverter.c +msgid "transparent_color should be an int" +msgstr "" + +#: shared-module/displayio/ColorConverter.c +msgid "transparent_color value is already set" +msgstr "" + +#: shared-module/displayio/ColorConverter.c +msgid "transparent_color value is not transparent" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" diff --git a/shared-bindings/displayio/ColorConverter.c b/shared-bindings/displayio/ColorConverter.c index c02dfdb6d..a041bbe59 100644 --- a/shared-bindings/displayio/ColorConverter.c +++ b/shared-bindings/displayio/ColorConverter.c @@ -110,9 +110,41 @@ const mp_obj_property_t displayio_colorconverter_dither_obj = { (mp_obj_t)&mp_const_none_obj}, }; +//| def make_transparent(self, pixel: int) -> None: +//| """Sets a pixel to not opaque.""" +//| +STATIC mp_obj_t displayio_colorconverter_make_transparent(mp_obj_t self_in, mp_obj_t transparent_color_obj) { + displayio_colorconverter_t *self = MP_OBJ_TO_PTR(self_in); + + mp_int_t transparent_color; + if (!mp_obj_get_int_maybe(transparent_color_obj, &transparent_color)) { + mp_raise_ValueError(translate("transparent_color should be an int")); + } + common_hal_displayio_colorconverter_make_transparent(self, transparent_color); + return mp_const_none; +} +MP_DEFINE_CONST_FUN_OBJ_2(displayio_colorconverter_make_transparent_obj, displayio_colorconverter_make_transparent); + +//| def make_opaque(self, pixel: int) -> None: +//| """Sets a pixel to opaque.""" +//| +STATIC mp_obj_t displayio_colorconverter_make_opaque(mp_obj_t self_in, mp_obj_t transparent_color_obj) { + displayio_colorconverter_t *self = MP_OBJ_TO_PTR(self_in); + + mp_int_t transparent_color; + if (!mp_obj_get_int_maybe(transparent_color_obj, &transparent_color)) { + mp_raise_ValueError(translate("transparent_color should be an int")); + } + common_hal_displayio_colorconverter_make_opaque(self, transparent_color); + return mp_const_none; +} +MP_DEFINE_CONST_FUN_OBJ_2(displayio_colorconverter_make_opaque_obj, displayio_colorconverter_make_opaque); + STATIC const mp_rom_map_elem_t displayio_colorconverter_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_convert), MP_ROM_PTR(&displayio_colorconverter_convert_obj) }, { MP_ROM_QSTR(MP_QSTR_dither), MP_ROM_PTR(&displayio_colorconverter_dither_obj) }, + { MP_ROM_QSTR(MP_QSTR_make_transparent), MP_ROM_PTR(&displayio_colorconverter_make_transparent_obj) }, + { MP_ROM_QSTR(MP_QSTR_make_opaque), MP_ROM_PTR(&displayio_colorconverter_make_opaque_obj) }, }; STATIC MP_DEFINE_CONST_DICT(displayio_colorconverter_locals_dict, displayio_colorconverter_locals_dict_table); diff --git a/shared-module/displayio/ColorConverter.c b/shared-module/displayio/ColorConverter.c index 0a1a7dc06..fef71cdf5 100644 --- a/shared-module/displayio/ColorConverter.c +++ b/shared-module/displayio/ColorConverter.c @@ -27,6 +27,7 @@ #include "shared-bindings/displayio/ColorConverter.h" #include "py/misc.h" +#include "py/runtime.h" uint32_t displayio_colorconverter_dither_noise_1 (uint32_t n) { @@ -129,15 +130,18 @@ bool common_hal_displayio_colorconverter_get_dither(displayio_colorconverter_t* } void common_hal_displayio_colorconverter_make_transparent(displayio_colorconverter_t* self, uint32_t transparent_color) { + if (self->transparent_color) { + mp_raise_RuntimeError(translate("transparent_color value is already set")); + } self->transparent_color = transparent_color; - // TODO: Does this require refreshing like the other modules? } void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self, uint32_t transparent_color) { - if (self->transparent_color == transparent_color) { - m_del(uint8_t, self, transparent_color); + if (self->transparent_color != transparent_color) { + mp_raise_RuntimeError(translate("transparent_color value is not transparent")); } - // TODO: Does this require refreshing like the other modules? + // 0x1000000 will never equal a valid color + self->transparent_color = 0x1000000; } void displayio_colorconverter_convert(displayio_colorconverter_t *self, const _displayio_colorspace_t* colorspace, const displayio_input_pixel_t *input_pixel, displayio_output_pixel_t *output_color) { -- cgit v1.2.3 From 2517e4b486563724771074da88bc7fd6eda02532 Mon Sep 17 00:00:00 2001 From: Jensen Date: Wed, 14 Oct 2020 21:51:22 -0500 Subject: displayio: ColorConverter handle if opaque color is black --- shared-bindings/displayio/ColorConverter.c | 15 +++++---------- shared-bindings/displayio/ColorConverter.h | 2 +- shared-module/displayio/ColorConverter.c | 9 +++------ 3 files changed, 9 insertions(+), 17 deletions(-) diff --git a/shared-bindings/displayio/ColorConverter.c b/shared-bindings/displayio/ColorConverter.c index a041bbe59..40550af82 100644 --- a/shared-bindings/displayio/ColorConverter.c +++ b/shared-bindings/displayio/ColorConverter.c @@ -117,7 +117,7 @@ STATIC mp_obj_t displayio_colorconverter_make_transparent(mp_obj_t self_in, mp_o displayio_colorconverter_t *self = MP_OBJ_TO_PTR(self_in); mp_int_t transparent_color; - if (!mp_obj_get_int_maybe(transparent_color_obj, &transparent_color)) { + if (!mp_obj_get_int(&transparent_color)) { mp_raise_ValueError(translate("transparent_color should be an int")); } common_hal_displayio_colorconverter_make_transparent(self, transparent_color); @@ -125,20 +125,15 @@ STATIC mp_obj_t displayio_colorconverter_make_transparent(mp_obj_t self_in, mp_o } MP_DEFINE_CONST_FUN_OBJ_2(displayio_colorconverter_make_transparent_obj, displayio_colorconverter_make_transparent); -//| def make_opaque(self, pixel: int) -> None: +//| def make_opaque(self) -> None: //| """Sets a pixel to opaque.""" //| -STATIC mp_obj_t displayio_colorconverter_make_opaque(mp_obj_t self_in, mp_obj_t transparent_color_obj) { +STATIC mp_obj_t displayio_colorconverter_make_opaque(mp_obj_t self_in) { displayio_colorconverter_t *self = MP_OBJ_TO_PTR(self_in); - - mp_int_t transparent_color; - if (!mp_obj_get_int_maybe(transparent_color_obj, &transparent_color)) { - mp_raise_ValueError(translate("transparent_color should be an int")); - } - common_hal_displayio_colorconverter_make_opaque(self, transparent_color); + common_hal_displayio_colorconverter_make_opaque(self); return mp_const_none; } -MP_DEFINE_CONST_FUN_OBJ_2(displayio_colorconverter_make_opaque_obj, displayio_colorconverter_make_opaque); +MP_DEFINE_CONST_FUN_OBJ_1(displayio_colorconverter_make_opaque_obj, displayio_colorconverter_make_opaque); STATIC const mp_rom_map_elem_t displayio_colorconverter_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_convert), MP_ROM_PTR(&displayio_colorconverter_convert_obj) }, diff --git a/shared-bindings/displayio/ColorConverter.h b/shared-bindings/displayio/ColorConverter.h index 441f7c7ae..e4ddd1972 100644 --- a/shared-bindings/displayio/ColorConverter.h +++ b/shared-bindings/displayio/ColorConverter.h @@ -40,6 +40,6 @@ void common_hal_displayio_colorconverter_set_dither(displayio_colorconverter_t* bool common_hal_displayio_colorconverter_get_dither(displayio_colorconverter_t* self); void common_hal_displayio_colorconverter_make_transparent(displayio_colorconverter_t* self, uint32_t transparent_color); -void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self, uint32_t transparent_color); +void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self); #endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_COLORCONVERTER_H diff --git a/shared-module/displayio/ColorConverter.c b/shared-module/displayio/ColorConverter.c index fef71cdf5..4089b2265 100644 --- a/shared-module/displayio/ColorConverter.c +++ b/shared-module/displayio/ColorConverter.c @@ -130,16 +130,13 @@ bool common_hal_displayio_colorconverter_get_dither(displayio_colorconverter_t* } void common_hal_displayio_colorconverter_make_transparent(displayio_colorconverter_t* self, uint32_t transparent_color) { - if (self->transparent_color) { - mp_raise_RuntimeError(translate("transparent_color value is already set")); + if (self->transparent_color >= 0x1000000) { + mp_raise_RuntimeError(translate("Only one color can be transparent at a time")); } self->transparent_color = transparent_color; } -void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self, uint32_t transparent_color) { - if (self->transparent_color != transparent_color) { - mp_raise_RuntimeError(translate("transparent_color value is not transparent")); - } +void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self) { // 0x1000000 will never equal a valid color self->transparent_color = 0x1000000; } -- cgit v1.2.3 From cb0a4abc9592378eb185bd04facf8db0b416a2fe Mon Sep 17 00:00:00 2001 From: Jensen Date: Wed, 14 Oct 2020 22:22:48 -0500 Subject: displayio: new translation strings --- locale/circuitpython.pot | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index ea29676b7..c4b40d361 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-12 20:47-0500\n" +"POT-Creation-Date: 2020-10-14 22:22-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1026,6 +1026,7 @@ msgstr "" msgid "Invalid BSSID" msgstr "" +#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "" @@ -1237,7 +1238,6 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c -#: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "" @@ -1400,6 +1400,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" @@ -3408,14 +3412,6 @@ msgstr "" msgid "transparent_color should be an int" msgstr "" -#: shared-module/displayio/ColorConverter.c -msgid "transparent_color value is already set" -msgstr "" - -#: shared-module/displayio/ColorConverter.c -msgid "transparent_color value is not transparent" -msgstr "" - #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" -- cgit v1.2.3 From b02a5bcbd5eb96111ba30c49780677573fe1a66d Mon Sep 17 00:00:00 2001 From: Jensen Date: Wed, 14 Oct 2020 23:05:19 -0500 Subject: displayio: Remove verbose error --- shared-bindings/displayio/ColorConverter.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/shared-bindings/displayio/ColorConverter.c b/shared-bindings/displayio/ColorConverter.c index 40550af82..4e41ceff1 100644 --- a/shared-bindings/displayio/ColorConverter.c +++ b/shared-bindings/displayio/ColorConverter.c @@ -116,10 +116,7 @@ const mp_obj_property_t displayio_colorconverter_dither_obj = { STATIC mp_obj_t displayio_colorconverter_make_transparent(mp_obj_t self_in, mp_obj_t transparent_color_obj) { displayio_colorconverter_t *self = MP_OBJ_TO_PTR(self_in); - mp_int_t transparent_color; - if (!mp_obj_get_int(&transparent_color)) { - mp_raise_ValueError(translate("transparent_color should be an int")); - } + mp_int_t transparent_color = mp_obj_get_int(&transparent_color); common_hal_displayio_colorconverter_make_transparent(self, transparent_color); return mp_const_none; } -- cgit v1.2.3 From fa75231ae321ea95007804ac01a39dcbd09ecd75 Mon Sep 17 00:00:00 2001 From: gamblor21 Date: Thu, 15 Oct 2020 18:46:42 -0500 Subject: Added max size check to recv_into --- shared-bindings/socketpool/Socket.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/shared-bindings/socketpool/Socket.c b/shared-bindings/socketpool/Socket.c index de05b8eb4..f4a1e636a 100644 --- a/shared-bindings/socketpool/Socket.c +++ b/shared-bindings/socketpool/Socket.c @@ -260,6 +260,9 @@ STATIC mp_obj_t socketpool_socket_recv_into(size_t n_args, const mp_obj_t *args) mp_int_t len = bufinfo.len; if (n_args == 3) { mp_int_t given_len = mp_obj_get_int(args[2]); + if (given_len > len) { + mp_raise_ValueError(translate("buffer too small for requested bytes")); + } if (given_len > 0 && given_len < len) { len = given_len; } -- cgit v1.2.3 From b336039aab03bd9f609bad0c211981961b6685d2 Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Thu, 15 Oct 2020 23:18:30 -0700 Subject: Disable the long way and return an ap_info object still needs work and cleanup --- ports/esp32s2/common-hal/wifi/Radio.c | 69 +++++++++++++++++++---------- ports/esp32s2/common-hal/wifi/Radio.h | 2 + shared-bindings/wifi/Radio.c | 83 +++++++++++++++++++++-------------- shared-bindings/wifi/Radio.h | 5 ++- 4 files changed, 102 insertions(+), 57 deletions(-) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index 13bcccc80..b1f9e67e0 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -25,6 +25,7 @@ */ #include "shared-bindings/wifi/Radio.h" +#include "shared-bindings/wifi/Network.h" #include @@ -149,7 +150,7 @@ wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t return WIFI_RADIO_ERROR_NONE; } -mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self) { +mp_obj_t common_hal_wifi_radio_get_ap_info(wifi_radio_obj_t *self) { if (!esp_netif_is_netif_up(self->netif)) { return mp_const_none; } @@ -159,18 +160,21 @@ mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self) { return mp_const_none; } + wifi_network_obj_t *apnet = m_new_obj(wifi_network_obj_t); + apnet->base.type = &wifi_network_type; // From esp_wifi.h, the possible return values (typos theirs): // ESP_OK: succeed // ESP_ERR_WIFI_CONN: The station interface don't initialized // ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status - if (esp_wifi_sta_get_ap_info(&self->ap_info) != ESP_OK){ + if (esp_wifi_sta_get_ap_info(&self->apnet.record) != ESP_OK){ return mp_const_none; } else { - return mp_obj_new_int(self->ap_info.rssi); + memcpy(&apnet->record, &self->apnet.record, sizeof(wifi_ap_record_t)); + return MP_OBJ_FROM_PTR(apnet); } } -mp_obj_t common_hal_wifi_radio_get_ap_ssid(wifi_radio_obj_t *self) { +mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self) { if (!esp_netif_is_netif_up(self->netif)) { return mp_const_none; } @@ -180,30 +184,51 @@ mp_obj_t common_hal_wifi_radio_get_ap_ssid(wifi_radio_obj_t *self) { return mp_const_none; } + // From esp_wifi.h, the possible return values (typos theirs): + // ESP_OK: succeed + // ESP_ERR_WIFI_CONN: The station interface don't initialized + // ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status if (esp_wifi_sta_get_ap_info(&self->ap_info) != ESP_OK){ return mp_const_none; } else { - const char* cstr = (const char*) self->ap_info.ssid; - return mp_obj_new_str(cstr, strlen(cstr)); + return mp_obj_new_int(self->ap_info.rssi); } } -mp_obj_t common_hal_wifi_radio_get_ap_bssid(wifi_radio_obj_t *self) { - if (!esp_netif_is_netif_up(self->netif)) { - return mp_const_none; - } - - // Make sure the interface is in STA mode - if (self->sta_mode){ - return mp_const_none; - } - - if (esp_wifi_sta_get_ap_info(&self->ap_info) != ESP_OK){ - return mp_const_none; - } else { - return mp_obj_new_bytes(self->ap_info.bssid, MAC_ADDRESS_LENGTH); - } -} +// mp_obj_t common_hal_wifi_radio_get_ap_ssid(wifi_radio_obj_t *self) { +// if (!esp_netif_is_netif_up(self->netif)) { +// return mp_const_none; +// } + +// // Make sure the interface is in STA mode +// if (self->sta_mode){ +// return mp_const_none; +// } + +// if (esp_wifi_sta_get_ap_info(&self->ap_info) != ESP_OK){ +// return mp_const_none; +// } else { +// const char* cstr = (const char*) self->ap_info.ssid; +// return mp_obj_new_str(cstr, strlen(cstr)); +// } +// } + +// mp_obj_t common_hal_wifi_radio_get_ap_bssid(wifi_radio_obj_t *self) { +// if (!esp_netif_is_netif_up(self->netif)) { +// return mp_const_none; +// } + +// // Make sure the interface is in STA mode +// if (self->sta_mode){ +// return mp_const_none; +// } + +// if (esp_wifi_sta_get_ap_info(&self->ap_info) != ESP_OK){ +// return mp_const_none; +// } else { +// return mp_obj_new_bytes(self->ap_info.bssid, MAC_ADDRESS_LENGTH); +// } +// } mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self) { if (!esp_netif_is_netif_up(self->netif)) { diff --git a/ports/esp32s2/common-hal/wifi/Radio.h b/ports/esp32s2/common-hal/wifi/Radio.h index 272c3a62e..f441096f7 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.h +++ b/ports/esp32s2/common-hal/wifi/Radio.h @@ -32,6 +32,7 @@ #include "components/esp_event/include/esp_event.h" #include "shared-bindings/wifi/ScannedNetworks.h" +#include "shared-bindings/wifi/Network.h" // Event bits for the Radio event group. #define WIFI_SCAN_DONE_BIT BIT0 @@ -47,6 +48,7 @@ typedef struct { EventGroupHandle_t event_group_handle; wifi_config_t sta_config; wifi_ap_record_t ap_info; + wifi_network_obj_t apnet; esp_netif_ip_info_t ip_info; esp_netif_dns_info_t dns_info; esp_netif_t *netif; diff --git a/shared-bindings/wifi/Radio.c b/shared-bindings/wifi/Radio.c index 96abadf6f..d75532769 100644 --- a/shared-bindings/wifi/Radio.c +++ b/shared-bindings/wifi/Radio.c @@ -179,37 +179,37 @@ const mp_obj_property_t wifi_radio_ap_rssi_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| ap_ssid: int -//| """SSID of the currently connected AP. Returns none if not connected""" -//| -STATIC mp_obj_t wifi_radio_get_ap_ssid(mp_obj_t self) { - return common_hal_wifi_radio_get_ap_ssid(self); - -} -MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_ssid_obj, wifi_radio_get_ap_ssid); - -const mp_obj_property_t wifi_radio_ap_ssid_obj = { - .base.type = &mp_type_property, - .proxy = { (mp_obj_t)&wifi_radio_get_ap_ssid_obj, - (mp_obj_t)&mp_const_none_obj, - (mp_obj_t)&mp_const_none_obj }, -}; - -//| ap_bssid: int -//| """BSSID (usually MAC) of the currently connected AP. Returns none if not connected""" -//| -STATIC mp_obj_t wifi_radio_get_ap_bssid(mp_obj_t self) { - return common_hal_wifi_radio_get_ap_bssid(self); - -} -MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_bssid_obj, wifi_radio_get_ap_bssid); - -const mp_obj_property_t wifi_radio_ap_bssid_obj = { - .base.type = &mp_type_property, - .proxy = { (mp_obj_t)&wifi_radio_get_ap_bssid_obj, - (mp_obj_t)&mp_const_none_obj, - (mp_obj_t)&mp_const_none_obj }, -}; +// //| ap_ssid: int +// //| """SSID of the currently connected AP. Returns none if not connected""" +// //| +// STATIC mp_obj_t wifi_radio_get_ap_ssid(mp_obj_t self) { +// return common_hal_wifi_radio_get_ap_ssid(self); + +// } +// MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_ssid_obj, wifi_radio_get_ap_ssid); + +// const mp_obj_property_t wifi_radio_ap_ssid_obj = { +// .base.type = &mp_type_property, +// .proxy = { (mp_obj_t)&wifi_radio_get_ap_ssid_obj, +// (mp_obj_t)&mp_const_none_obj, +// (mp_obj_t)&mp_const_none_obj }, +// }; + +// //| ap_bssid: int +// //| """BSSID (usually MAC) of the currently connected AP. Returns none if not connected""" +// //| +// STATIC mp_obj_t wifi_radio_get_ap_bssid(mp_obj_t self) { +// return common_hal_wifi_radio_get_ap_bssid(self); + +// } +// MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_bssid_obj, wifi_radio_get_ap_bssid); + +// const mp_obj_property_t wifi_radio_ap_bssid_obj = { +// .base.type = &mp_type_property, +// .proxy = { (mp_obj_t)&wifi_radio_get_ap_bssid_obj, +// (mp_obj_t)&mp_const_none_obj, +// (mp_obj_t)&mp_const_none_obj }, +// }; //| ipv4_gateway: Optional[ipaddress.IPv4Address] //| """IP v4 Address of the gateway when connected to an access point. None otherwise.""" @@ -275,6 +275,22 @@ const mp_obj_property_t wifi_radio_ipv4_dns_obj = { (mp_obj_t)&mp_const_none_obj }, }; +//| ap_info: Optional[Network] +//| """None otherwise.""" +//| +STATIC mp_obj_t wifi_radio_get_ap_info(mp_obj_t self) { + return common_hal_wifi_radio_get_ap_info(self); + +} +MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_info_obj, wifi_radio_get_ap_info); + +const mp_obj_property_t wifi_radio_ap_info_obj = { + .base.type = &mp_type_property, + .proxy = { (mp_obj_t)&wifi_radio_get_ap_info_obj, + (mp_obj_t)&mp_const_none_obj, + (mp_obj_t)&mp_const_none_obj }, +}; + //| def ping(self, ip, *, timeout: float = 0.5) -> float: //| """Ping an IP to test connectivity. Returns echo time in seconds. //| Returns None when it times out.""" @@ -315,9 +331,10 @@ STATIC const mp_rom_map_elem_t wifi_radio_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_connect), MP_ROM_PTR(&wifi_radio_connect_obj) }, // { MP_ROM_QSTR(MP_QSTR_connect_to_enterprise), MP_ROM_PTR(&wifi_radio_connect_to_enterprise_obj) }, + { MP_ROM_QSTR(MP_QSTR_ap_info), MP_ROM_PTR(&wifi_radio_ap_info_obj) }, { MP_ROM_QSTR(MP_QSTR_ap_rssi), MP_ROM_PTR(&wifi_radio_ap_rssi_obj) }, - { MP_ROM_QSTR(MP_QSTR_ap_ssid), MP_ROM_PTR(&wifi_radio_ap_ssid_obj) }, - { MP_ROM_QSTR(MP_QSTR_ap_bssid), MP_ROM_PTR(&wifi_radio_ap_bssid_obj) }, + // { MP_ROM_QSTR(MP_QSTR_ap_ssid), MP_ROM_PTR(&wifi_radio_ap_ssid_obj) }, + // { MP_ROM_QSTR(MP_QSTR_ap_bssid), MP_ROM_PTR(&wifi_radio_ap_bssid_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_dns), MP_ROM_PTR(&wifi_radio_ipv4_dns_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_gateway), MP_ROM_PTR(&wifi_radio_ipv4_gateway_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_subnet), MP_ROM_PTR(&wifi_radio_ipv4_subnet_obj) }, diff --git a/shared-bindings/wifi/Radio.h b/shared-bindings/wifi/Radio.h index bf30ac340..6dca40c56 100644 --- a/shared-bindings/wifi/Radio.h +++ b/shared-bindings/wifi/Radio.h @@ -53,9 +53,10 @@ extern void common_hal_wifi_radio_stop_scanning_networks(wifi_radio_obj_t *self) extern wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t* ssid, size_t ssid_len, uint8_t* password, size_t password_len, uint8_t channel, mp_float_t timeout, uint8_t* bssid, size_t bssid_len); +extern mp_obj_t common_hal_wifi_radio_get_ap_info(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self); -extern mp_obj_t common_hal_wifi_radio_get_ap_ssid(wifi_radio_obj_t *self); -extern mp_obj_t common_hal_wifi_radio_get_ap_bssid(wifi_radio_obj_t *self); +// extern mp_obj_t common_hal_wifi_radio_get_ap_ssid(wifi_radio_obj_t *self); +// extern mp_obj_t common_hal_wifi_radio_get_ap_bssid(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_dns(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_subnet(wifi_radio_obj_t *self); -- cgit v1.2.3 From 9d840aab0b81db61e185eeac5d8359489ff36320 Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Thu, 15 Oct 2020 23:45:11 -0700 Subject: Cleaned up and now testing --- ports/esp32s2/common-hal/wifi/Radio.c | 66 +++-------------------------------- ports/esp32s2/common-hal/wifi/Radio.h | 3 +- shared-bindings/wifi/Radio.c | 53 +--------------------------- shared-bindings/wifi/Radio.h | 3 -- 4 files changed, 7 insertions(+), 118 deletions(-) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index b1f9e67e0..6203a151b 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -160,76 +160,20 @@ mp_obj_t common_hal_wifi_radio_get_ap_info(wifi_radio_obj_t *self) { return mp_const_none; } - wifi_network_obj_t *apnet = m_new_obj(wifi_network_obj_t); - apnet->base.type = &wifi_network_type; + wifi_network_obj_t *ap_info = m_new_obj(wifi_network_obj_t); + ap_info->base.type = &wifi_network_type; // From esp_wifi.h, the possible return values (typos theirs): // ESP_OK: succeed // ESP_ERR_WIFI_CONN: The station interface don't initialized // ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status - if (esp_wifi_sta_get_ap_info(&self->apnet.record) != ESP_OK){ + if (esp_wifi_sta_get_ap_info(&self->ap_info.record) != ESP_OK){ return mp_const_none; } else { - memcpy(&apnet->record, &self->apnet.record, sizeof(wifi_ap_record_t)); - return MP_OBJ_FROM_PTR(apnet); + memcpy(&ap_info->record, &self->ap_info.record, sizeof(wifi_ap_record_t)); + return MP_OBJ_FROM_PTR(ap_info); } } -mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self) { - if (!esp_netif_is_netif_up(self->netif)) { - return mp_const_none; - } - - // Make sure the interface is in STA mode - if (self->sta_mode){ - return mp_const_none; - } - - // From esp_wifi.h, the possible return values (typos theirs): - // ESP_OK: succeed - // ESP_ERR_WIFI_CONN: The station interface don't initialized - // ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status - if (esp_wifi_sta_get_ap_info(&self->ap_info) != ESP_OK){ - return mp_const_none; - } else { - return mp_obj_new_int(self->ap_info.rssi); - } -} - -// mp_obj_t common_hal_wifi_radio_get_ap_ssid(wifi_radio_obj_t *self) { -// if (!esp_netif_is_netif_up(self->netif)) { -// return mp_const_none; -// } - -// // Make sure the interface is in STA mode -// if (self->sta_mode){ -// return mp_const_none; -// } - -// if (esp_wifi_sta_get_ap_info(&self->ap_info) != ESP_OK){ -// return mp_const_none; -// } else { -// const char* cstr = (const char*) self->ap_info.ssid; -// return mp_obj_new_str(cstr, strlen(cstr)); -// } -// } - -// mp_obj_t common_hal_wifi_radio_get_ap_bssid(wifi_radio_obj_t *self) { -// if (!esp_netif_is_netif_up(self->netif)) { -// return mp_const_none; -// } - -// // Make sure the interface is in STA mode -// if (self->sta_mode){ -// return mp_const_none; -// } - -// if (esp_wifi_sta_get_ap_info(&self->ap_info) != ESP_OK){ -// return mp_const_none; -// } else { -// return mp_obj_new_bytes(self->ap_info.bssid, MAC_ADDRESS_LENGTH); -// } -// } - mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self) { if (!esp_netif_is_netif_up(self->netif)) { return mp_const_none; diff --git a/ports/esp32s2/common-hal/wifi/Radio.h b/ports/esp32s2/common-hal/wifi/Radio.h index f441096f7..c7f484eaf 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.h +++ b/ports/esp32s2/common-hal/wifi/Radio.h @@ -47,8 +47,7 @@ typedef struct { StaticEventGroup_t event_group; EventGroupHandle_t event_group_handle; wifi_config_t sta_config; - wifi_ap_record_t ap_info; - wifi_network_obj_t apnet; + wifi_network_obj_t ap_info; esp_netif_ip_info_t ip_info; esp_netif_dns_info_t dns_info; esp_netif_t *netif; diff --git a/shared-bindings/wifi/Radio.c b/shared-bindings/wifi/Radio.c index d75532769..450331009 100644 --- a/shared-bindings/wifi/Radio.c +++ b/shared-bindings/wifi/Radio.c @@ -163,54 +163,6 @@ STATIC mp_obj_t wifi_radio_connect(size_t n_args, const mp_obj_t *pos_args, mp_m } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(wifi_radio_connect_obj, 1, wifi_radio_connect); -//| ap_rssi: int -//| """RSSI of the currently connected AP. Returns none if not connected""" -//| -STATIC mp_obj_t wifi_radio_get_ap_rssi(mp_obj_t self) { - return common_hal_wifi_radio_get_ap_rssi(self); - -} -MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_rssi_obj, wifi_radio_get_ap_rssi); - -const mp_obj_property_t wifi_radio_ap_rssi_obj = { - .base.type = &mp_type_property, - .proxy = { (mp_obj_t)&wifi_radio_get_ap_rssi_obj, - (mp_obj_t)&mp_const_none_obj, - (mp_obj_t)&mp_const_none_obj }, -}; - -// //| ap_ssid: int -// //| """SSID of the currently connected AP. Returns none if not connected""" -// //| -// STATIC mp_obj_t wifi_radio_get_ap_ssid(mp_obj_t self) { -// return common_hal_wifi_radio_get_ap_ssid(self); - -// } -// MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_ssid_obj, wifi_radio_get_ap_ssid); - -// const mp_obj_property_t wifi_radio_ap_ssid_obj = { -// .base.type = &mp_type_property, -// .proxy = { (mp_obj_t)&wifi_radio_get_ap_ssid_obj, -// (mp_obj_t)&mp_const_none_obj, -// (mp_obj_t)&mp_const_none_obj }, -// }; - -// //| ap_bssid: int -// //| """BSSID (usually MAC) of the currently connected AP. Returns none if not connected""" -// //| -// STATIC mp_obj_t wifi_radio_get_ap_bssid(mp_obj_t self) { -// return common_hal_wifi_radio_get_ap_bssid(self); - -// } -// MP_DEFINE_CONST_FUN_OBJ_1(wifi_radio_get_ap_bssid_obj, wifi_radio_get_ap_bssid); - -// const mp_obj_property_t wifi_radio_ap_bssid_obj = { -// .base.type = &mp_type_property, -// .proxy = { (mp_obj_t)&wifi_radio_get_ap_bssid_obj, -// (mp_obj_t)&mp_const_none_obj, -// (mp_obj_t)&mp_const_none_obj }, -// }; - //| ipv4_gateway: Optional[ipaddress.IPv4Address] //| """IP v4 Address of the gateway when connected to an access point. None otherwise.""" //| @@ -276,7 +228,7 @@ const mp_obj_property_t wifi_radio_ipv4_dns_obj = { }; //| ap_info: Optional[Network] -//| """None otherwise.""" +//| """Network object containing BSSID, SSID, channel, and RSSI when connected to an access point. None otherwise.""" //| STATIC mp_obj_t wifi_radio_get_ap_info(mp_obj_t self) { return common_hal_wifi_radio_get_ap_info(self); @@ -332,9 +284,6 @@ STATIC const mp_rom_map_elem_t wifi_radio_locals_dict_table[] = { // { MP_ROM_QSTR(MP_QSTR_connect_to_enterprise), MP_ROM_PTR(&wifi_radio_connect_to_enterprise_obj) }, { MP_ROM_QSTR(MP_QSTR_ap_info), MP_ROM_PTR(&wifi_radio_ap_info_obj) }, - { MP_ROM_QSTR(MP_QSTR_ap_rssi), MP_ROM_PTR(&wifi_radio_ap_rssi_obj) }, - // { MP_ROM_QSTR(MP_QSTR_ap_ssid), MP_ROM_PTR(&wifi_radio_ap_ssid_obj) }, - // { MP_ROM_QSTR(MP_QSTR_ap_bssid), MP_ROM_PTR(&wifi_radio_ap_bssid_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_dns), MP_ROM_PTR(&wifi_radio_ipv4_dns_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_gateway), MP_ROM_PTR(&wifi_radio_ipv4_gateway_obj) }, { MP_ROM_QSTR(MP_QSTR_ipv4_subnet), MP_ROM_PTR(&wifi_radio_ipv4_subnet_obj) }, diff --git a/shared-bindings/wifi/Radio.h b/shared-bindings/wifi/Radio.h index 6dca40c56..38cc93337 100644 --- a/shared-bindings/wifi/Radio.h +++ b/shared-bindings/wifi/Radio.h @@ -54,9 +54,6 @@ extern void common_hal_wifi_radio_stop_scanning_networks(wifi_radio_obj_t *self) extern wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t* ssid, size_t ssid_len, uint8_t* password, size_t password_len, uint8_t channel, mp_float_t timeout, uint8_t* bssid, size_t bssid_len); extern mp_obj_t common_hal_wifi_radio_get_ap_info(wifi_radio_obj_t *self); -extern mp_obj_t common_hal_wifi_radio_get_ap_rssi(wifi_radio_obj_t *self); -// extern mp_obj_t common_hal_wifi_radio_get_ap_ssid(wifi_radio_obj_t *self); -// extern mp_obj_t common_hal_wifi_radio_get_ap_bssid(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_dns(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_gateway(wifi_radio_obj_t *self); extern mp_obj_t common_hal_wifi_radio_get_ipv4_subnet(wifi_radio_obj_t *self); -- cgit v1.2.3 From 645382d51d37a40312118eebc11da75639913fce Mon Sep 17 00:00:00 2001 From: gamblor21 Date: Fri, 16 Oct 2020 14:21:00 -0500 Subject: Updated translation --- locale/circuitpython.pot | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index c4951f78f..035eb105f 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-29 20:14-0500\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -285,6 +285,7 @@ msgid "All I2C peripherals are in use" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -892,6 +893,7 @@ msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -928,7 +930,8 @@ msgid "Group full" msgstr "" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "" @@ -998,7 +1001,8 @@ msgid "Invalid %q pin" msgstr "" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c -#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c +#: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "" @@ -2089,6 +2093,10 @@ msgstr "" msgid "buffer too small" msgstr "" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "" @@ -3144,6 +3152,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h @@ -3151,6 +3160,7 @@ msgstr "" #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" msgstr "" -- cgit v1.2.3 From de328c3be97891ecd7cb6a3daff9ce7d7faf7e76 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Sat, 17 Oct 2020 02:22:15 +0530 Subject: Update port status in readme --- README.rst | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/README.rst b/README.rst index 347b8b8c6..99a35d6da 100644 --- a/README.rst +++ b/README.rst @@ -95,7 +95,7 @@ Differences from `MicroPython `__ CircuitPython: - Supports native USB on all boards, allowing file editing without special tools. -- Supports only SAMD21, SAMD51, nRF52840, CXD56, STM32F4 and i.MX RT ports. +- Support status for ports is different. - Floats (aka decimals) are enabled for all builds. - Error messages are translated into 10+ languages. - Does not support concurrency within Python (including interrupts and threading). Some concurrency @@ -137,8 +137,8 @@ Behavior API ~~~ -- Unified hardware APIs. Documented - `on ReadTheDocs `_. +- Unified hardware APIs. Documented on + `ReadTheDocs `_. - API docs are rST within the C files in ``shared-bindings``. - No ``machine`` API. @@ -201,14 +201,27 @@ Ports Ports include the code unique to a microcontroller line and also variations based on the board. -- ``atmel-samd`` Support for SAMD21 and SAMD51 based boards. -- ``nrf`` Support for the nRF52840 based boards. -- ``unix`` Support for UNIX. Only used for automated testing. +================ ============================================================ +Supported Support status +================ ============================================================ +atmel-samd ``SAMD21`` stable | ``SAMD51`` stable +cxd56 stable +esp32s2 beta +litex alpha +mimxrt10xx alpha +nrf stable +stm ``F4`` stable | ``others`` beta +unix alpha +================ ============================================================ + +- ``stable`` Highly unlikely to have bugs or missing functionality. +- ``beta`` Being actively improved but may be missing functionality and have bugs. +- ``alpha`` Will have bugs and missing functionality. The remaining port directories not listed above are in the repo to maintain compatibility with the `MicroPython `__ parent project. -`back to top <#circuitpython>`__ +`Back to Top <#circuitpython>`__ .. |Build Status| image:: https://github.com/adafruit/circuitpython/workflows/Build%20CI/badge.svg :target: https://github.com/adafruit/circuitpython/actions?query=branch%3Amain -- cgit v1.2.3 From 74c07a4bdcc942e57668f1a2181e00d1213864a7 Mon Sep 17 00:00:00 2001 From: Jensen Date: Fri, 16 Oct 2020 19:48:41 -0500 Subject: displayio: Add in opaque pixel option for future --- locale/circuitpython.pot | 6 +----- shared-bindings/displayio/ColorConverter.c | 8 +++++--- shared-bindings/displayio/ColorConverter.h | 2 +- shared-module/displayio/ColorConverter.c | 4 +++- 4 files changed, 10 insertions(+), 10 deletions(-) diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index c4b40d361..35143e04e 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-14 22:22-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -3408,10 +3408,6 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" -#: shared-bindings/displayio/ColorConverter.c -msgid "transparent_color should be an int" -msgstr "" - #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" diff --git a/shared-bindings/displayio/ColorConverter.c b/shared-bindings/displayio/ColorConverter.c index 4e41ceff1..e47a961a5 100644 --- a/shared-bindings/displayio/ColorConverter.c +++ b/shared-bindings/displayio/ColorConverter.c @@ -125,12 +125,14 @@ MP_DEFINE_CONST_FUN_OBJ_2(displayio_colorconverter_make_transparent_obj, display //| def make_opaque(self) -> None: //| """Sets a pixel to opaque.""" //| -STATIC mp_obj_t displayio_colorconverter_make_opaque(mp_obj_t self_in) { +STATIC mp_obj_t displayio_colorconverter_make_opaque(mp_obj_t self_in, mp_obj_t transparent_color_obj) { displayio_colorconverter_t *self = MP_OBJ_TO_PTR(self_in); - common_hal_displayio_colorconverter_make_opaque(self); + + mp_int_t transparent_color = mp_obj_get_int(&transparent_color); + common_hal_displayio_colorconverter_make_opaque(self, transparent_color); return mp_const_none; } -MP_DEFINE_CONST_FUN_OBJ_1(displayio_colorconverter_make_opaque_obj, displayio_colorconverter_make_opaque); +MP_DEFINE_CONST_FUN_OBJ_2(displayio_colorconverter_make_opaque_obj, displayio_colorconverter_make_opaque); STATIC const mp_rom_map_elem_t displayio_colorconverter_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_convert), MP_ROM_PTR(&displayio_colorconverter_convert_obj) }, diff --git a/shared-bindings/displayio/ColorConverter.h b/shared-bindings/displayio/ColorConverter.h index e4ddd1972..441f7c7ae 100644 --- a/shared-bindings/displayio/ColorConverter.h +++ b/shared-bindings/displayio/ColorConverter.h @@ -40,6 +40,6 @@ void common_hal_displayio_colorconverter_set_dither(displayio_colorconverter_t* bool common_hal_displayio_colorconverter_get_dither(displayio_colorconverter_t* self); void common_hal_displayio_colorconverter_make_transparent(displayio_colorconverter_t* self, uint32_t transparent_color); -void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self); +void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self, uint32_t transparent_color); #endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_COLORCONVERTER_H diff --git a/shared-module/displayio/ColorConverter.c b/shared-module/displayio/ColorConverter.c index 4089b2265..d1a4f16a9 100644 --- a/shared-module/displayio/ColorConverter.c +++ b/shared-module/displayio/ColorConverter.c @@ -136,7 +136,9 @@ void common_hal_displayio_colorconverter_make_transparent(displayio_colorconvert self->transparent_color = transparent_color; } -void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self) { +void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self, uint32_t transparent_color) { + (void) transparent_color; + // 0x1000000 will never equal a valid color self->transparent_color = 0x1000000; } -- cgit v1.2.3 From fc3f2a3f7f670f28d1a57eb61dfbf065463c906a Mon Sep 17 00:00:00 2001 From: Jensen Date: Fri, 16 Oct 2020 20:05:39 -0500 Subject: displayio: Remove trailing whitespace --- shared-module/displayio/ColorConverter.c | 1 - 1 file changed, 1 deletion(-) diff --git a/shared-module/displayio/ColorConverter.c b/shared-module/displayio/ColorConverter.c index d1a4f16a9..dc64da03d 100644 --- a/shared-module/displayio/ColorConverter.c +++ b/shared-module/displayio/ColorConverter.c @@ -138,7 +138,6 @@ void common_hal_displayio_colorconverter_make_transparent(displayio_colorconvert void common_hal_displayio_colorconverter_make_opaque(displayio_colorconverter_t* self, uint32_t transparent_color) { (void) transparent_color; - // 0x1000000 will never equal a valid color self->transparent_color = 0x1000000; } -- cgit v1.2.3 From 1efcb975abe2ce8fc4e2f6e8875da54c86f238e5 Mon Sep 17 00:00:00 2001 From: Alvaro Figueroa Date: Fri, 16 Oct 2020 21:08:52 +0000 Subject: Translated using Weblate (Spanish) Currently translated at 100.0% (834 of 834 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/es/ --- locale/es.po | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/locale/es.po b/locale/es.po index 16254aa5e..db20dea12 100644 --- a/locale/es.po +++ b/locale/es.po @@ -8,15 +8,15 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-15 16:06+0530\n" -"PO-Revision-Date: 2020-10-09 17:19+0000\n" -"Last-Translator: dherrada \n" +"PO-Revision-Date: 2020-10-17 02:31+0000\n" +"Last-Translator: Alvaro Figueroa \n" "Language-Team: \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.3-dev\n" +"X-Generator: Weblate 4.3.1-dev\n" #: main.c msgid "" @@ -255,7 +255,7 @@ msgstr "'return' fuera de una función" #: py/compile.c msgid "'yield from' inside async function" -msgstr "" +msgstr "'yield from' dentro función asincrónica" #: py/compile.c msgid "'yield' outside function" @@ -284,7 +284,7 @@ msgstr "El canal EXTINT ya está siendo utilizado" #: ports/esp32s2/common-hal/analogio/AnalogIn.c msgid "ADC2 is being used by WiFi" -msgstr "" +msgstr "ADC2 está siendo usado por WiFi" #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format @@ -969,7 +969,7 @@ msgstr "Hardware en uso, pruebe pines alternativos" #: shared-bindings/wifi/Radio.c msgid "Hostname must be between 1 and 253 characters" -msgstr "" +msgstr "Hostname debe ser entre 1 y 253 caracteres" #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" @@ -2803,7 +2803,7 @@ msgstr "especificador de formato inválido" #: shared-bindings/wifi/Radio.c msgid "invalid hostname" -msgstr "" +msgstr "hostname inválido" #: extmod/modussl_axtls.c msgid "invalid key" @@ -3522,7 +3522,7 @@ msgstr "objeto de tipo '%q' no tiene atributo '%q'" #: py/objgenerator.c msgid "type object 'generator' has no attribute '__await__'" -msgstr "" +msgstr "objeto tipo 'generator' no tiene un atributo '__await__'" #: py/objtype.c msgid "type takes 1 or 3 arguments" -- cgit v1.2.3 From 1e7e5eb1ff43ee57fa2dd5f2def8fcdae7e60683 Mon Sep 17 00:00:00 2001 From: hexthat Date: Fri, 16 Oct 2020 19:10:09 +0000 Subject: Translated using Weblate (Chinese (Pinyin)) Currently translated at 100.0% (834 of 834 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/zh_Latn/ --- locale/zh_Latn_pinyin.po | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index bf7b3c636..365b1e498 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-15 16:06+0530\n" -"PO-Revision-Date: 2020-10-13 17:11+0000\n" +"PO-Revision-Date: 2020-10-17 02:31+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -15,7 +15,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Weblate 4.3-dev\n" +"X-Generator: Weblate 4.3.1-dev\n" #: main.c msgid "" @@ -959,7 +959,7 @@ msgstr "Shǐyòng de yìngjiàn, qǐng chángshì qítā yǐn jiǎo" #: shared-bindings/wifi/Radio.c msgid "Hostname must be between 1 and 253 characters" -msgstr "" +msgstr "zhǔ jī míng bì xū jiè yú 1 hé 253 gè zì fú zhī jiān" #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" @@ -2779,7 +2779,7 @@ msgstr "wúxiào de géshì biāozhù" #: shared-bindings/wifi/Radio.c msgid "invalid hostname" -msgstr "" +msgstr "wú xiào zhǔ jī míng" #: extmod/modussl_axtls.c msgid "invalid key" -- cgit v1.2.3 From 76f1db7a8795f2594db6b6d0d6f38a48a2cfd8af Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Sat, 17 Oct 2020 00:23:31 -0700 Subject: Set sta_mode flag for actual use/checking --- ports/esp32s2/common-hal/wifi/Radio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index 6203a151b..80afc5eaa 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -53,6 +53,8 @@ static void start_station(wifi_radio_obj_t *self) { } esp_wifi_set_mode(next_mode); + self->sta_mode = 1; + esp_wifi_set_config(WIFI_MODE_STA, &self->sta_config); } @@ -156,7 +158,7 @@ mp_obj_t common_hal_wifi_radio_get_ap_info(wifi_radio_obj_t *self) { } // Make sure the interface is in STA mode - if (self->sta_mode){ + if (!self->sta_mode){ return mp_const_none; } -- cgit v1.2.3 From dc10e968149f50fbc88158bcb3f78380667abb40 Mon Sep 17 00:00:00 2001 From: Noel Gaetan Date: Sat, 17 Oct 2020 16:54:13 +0200 Subject: Update CONTRIBUTING.md --- CONTRIBUTING.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md index 29db39793..15b4cfc89 100644 --- a/CONTRIBUTING.md +++ b/CONTRIBUTING.md @@ -6,7 +6,7 @@ SPDX-License-Identifier: MIT # Contributing Please note that this project is released with a -[Contributor Code of Conduct](https://github.com/adafruit/circuitpython/blob/main/CODE_OF_CONDUCT.md). +[Contributor Code of Conduct](CODE_OF_CONDUCT.md). By participating in this project you agree to abide by its terms. Participation covers any forum used to converse about CircuitPython including unofficial and official spaces. Failure to do so will result in corrective actions such as time out or ban from the project. -- cgit v1.2.3 From 7cf776d39e9c9e4694b65b636f456630b462958c Mon Sep 17 00:00:00 2001 From: Noel Gaetan Date: Sat, 17 Oct 2020 17:11:17 +0200 Subject: Update CONTRIBUTING.md test fix url 404 --- CONTRIBUTING.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md index 15b4cfc89..c94e8db8c 100644 --- a/CONTRIBUTING.md +++ b/CONTRIBUTING.md @@ -4,6 +4,8 @@ SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://g SPDX-License-Identifier: MIT --> + + # Contributing Please note that this project is released with a [Contributor Code of Conduct](CODE_OF_CONDUCT.md). -- cgit v1.2.3 From a71885c3915298922cbc8934620d14193dc5d4f4 Mon Sep 17 00:00:00 2001 From: Noel Gaetan Date: Sat, 17 Oct 2020 10:35:34 +0000 Subject: Translated using Weblate (French) Currently translated at 100.0% (834 of 834 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/fr/ --- locale/fr.po | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/locale/fr.po b/locale/fr.po index 482fd2809..e4af75891 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -8,14 +8,14 @@ msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-15 16:06+0530\n" -"PO-Revision-Date: 2020-10-15 18:17+0000\n" -"Last-Translator: Jeff Epler \n" +"PO-Revision-Date: 2020-10-17 15:35+0000\n" +"Last-Translator: Noel Gaetan \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.3-dev\n" +"X-Generator: Weblate 4.3.1-dev\n" #: main.c msgid "" @@ -23,7 +23,7 @@ msgid "" "Code done running. Waiting for reload.\n" msgstr "" "\n" -"Fin d'éxecution du code. En attente de recharge.\n" +"Fin d'exécution du code. En attente de rechargement.\n" #: supervisor/shared/safe_mode.c msgid "" @@ -122,39 +122,39 @@ msgstr "'%q' argument requis" #: py/runtime.c msgid "'%q' object cannot assign attribute '%q'" -msgstr "object '%q' ne peut assigner l'attribut '%q'" +msgstr "l'objet '%q' ne peut avoir l'attribut '%q'" #: py/proto.c msgid "'%q' object does not support '%q'" -msgstr "object '%q' ne supporte pas '%q'" +msgstr "l'objet '%q' ne supporte pas '%q'" #: py/obj.c msgid "'%q' object does not support item assignment" -msgstr "objet '%q' ne supporte pas l'assignement d'objets" +msgstr "l'objet '%q' ne supporte pas l'assignement d'objets" #: py/obj.c msgid "'%q' object does not support item deletion" -msgstr "object '%q' ne supported pas la suppression d'objet" +msgstr "l'objet '%q' ne supporte pas la suppression d'objet" #: py/runtime.c msgid "'%q' object has no attribute '%q'" -msgstr "object '%q' n'as pas d'attribut '%q'" +msgstr "l'objet '%q' n'as pas d'attribut '%q'" #: py/runtime.c msgid "'%q' object is not an iterator" -msgstr "object '%q' n'est pas un itérateur" +msgstr "l'objet '%q' n'est pas un itérateur" #: py/objtype.c py/runtime.c msgid "'%q' object is not callable" -msgstr "object '%q' ne peut pas être appelé" +msgstr "l'objet '%q' ne peut pas être appelé" #: py/runtime.c msgid "'%q' object is not iterable" -msgstr "objet '%q' n'est pas iterable" +msgstr "l'objet '%q' n'est pas itérable" #: py/obj.c msgid "'%q' object is not subscriptable" -msgstr "objet '%q' n'est pas souscriptable" +msgstr "l'objet '%q' n'est pas souscriptable" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format @@ -169,7 +169,7 @@ msgstr "'%s' attend un registre" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects a special register" -msgstr "'%s' attend un registre special" +msgstr "'%s' attend un registre spécial" #: py/emitinlinethumb.c #, c-format -- cgit v1.2.3 From c85a845ff4d1edc8c001b0138fbddd6f1ff1d3a6 Mon Sep 17 00:00:00 2001 From: Antonin ENFRUN Date: Sat, 17 Oct 2020 09:33:07 +0000 Subject: Translated using Weblate (French) Currently translated at 100.0% (834 of 834 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/fr/ --- locale/fr.po | 136 +++++++++++++++++++++++++++++++---------------------------- 1 file changed, 71 insertions(+), 65 deletions(-) diff --git a/locale/fr.po b/locale/fr.po index e4af75891..a8a382c70 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -9,7 +9,7 @@ msgstr "" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-15 16:06+0530\n" "PO-Revision-Date: 2020-10-17 15:35+0000\n" -"Last-Translator: Noel Gaetan \n" +"Last-Translator: Antonin ENFRUN \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" @@ -256,7 +256,7 @@ msgstr "'return' en dehors d'une fonction" #: py/compile.c msgid "'yield from' inside async function" -msgstr "" +msgstr "'yield from' dans une fonction async" #: py/compile.c msgid "'yield' outside function" @@ -346,7 +346,7 @@ msgstr "S'annonce déjà." #: ports/atmel-samd/common-hal/canio/Listener.c msgid "Already have all-matches listener" -msgstr "" +msgstr "Il y a déjà un auditeur all-matches" #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c @@ -355,7 +355,7 @@ msgstr "Déjà en cours d'exécution" #: ports/esp32s2/common-hal/wifi/Radio.c msgid "Already scanning for wifi networks" -msgstr "" +msgstr "Déjà à la recherche des réseaux wifi" #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" @@ -706,11 +706,11 @@ msgstr "Impossible de redémarrer PWM" #: ports/esp32s2/common-hal/neopixel_write/__init__.c msgid "Could not retrieve clock" -msgstr "" +msgstr "Impossible d’obtenir l’horloge" #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" -msgstr "" +msgstr "Impossible de définir l’adresse" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not start PWM" @@ -862,7 +862,7 @@ msgstr "La FFT est définie pour les ndarrays uniquement" #: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Failed SSL handshake" -msgstr "" +msgstr "Échec du handshake SSL" #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." @@ -889,11 +889,11 @@ msgstr "Echec de l'allocation de %d octets du tampon RX" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Failed to allocate Wifi memory" -msgstr "" +msgstr "Impossible d’allouer la mémoire pour Wifi" #: ports/esp32s2/common-hal/wifi/ScannedNetworks.c msgid "Failed to allocate wifi scan memory" -msgstr "" +msgstr "Impossible d'allouer la mémoire pour le scan wifi" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" @@ -927,16 +927,16 @@ msgstr "Le fichier existe" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" -msgstr "" +msgstr "Filtre trop complexe" #: ports/cxd56/common-hal/camera/Camera.c msgid "Format not supported" -msgstr "" +msgstr "Format non supporté" #: shared-module/framebufferio/FramebufferDisplay.c #, c-format msgid "Framebuffer requires %d bytes" -msgstr "" +msgstr "Le framebuffer nécessite %d octets" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "Frequency captured is above capability. Capture Paused." @@ -974,7 +974,7 @@ msgstr "Matériel utilisé, essayez d'autres broches" #: shared-bindings/wifi/Radio.c msgid "Hostname must be between 1 and 253 characters" -msgstr "" +msgstr "Hostname doit faire entre 1 et 253 caractères" #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" @@ -1007,7 +1007,7 @@ msgstr "Taille de tampon incorrecte" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" -msgstr "" +msgstr "L'entrée prend trop de temps" #: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" @@ -1043,7 +1043,7 @@ msgstr "Broche invalide pour '%q'" #: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c #: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" -msgstr "" +msgstr "Sélection de pin %q invalide" #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Invalid ADC Unit value" @@ -1391,11 +1391,11 @@ msgstr "Ne joue pas" #: main.c msgid "Not running saved code.\n" -msgstr "" +msgstr "N'exécute pas le code sauvegardé.\n" #: shared-bindings/_bleio/__init__.c msgid "Not settable" -msgstr "" +msgstr "Non réglable" #: shared-bindings/util.c msgid "" @@ -1414,11 +1414,11 @@ msgstr "Uniquement 8 ou 16 bit mono avec " #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Only IPv4 SOCK_STREAM sockets supported" -msgstr "" +msgstr "Seules les sockets IPv4 SOCK_STREAM sont prises en charge" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" -msgstr "" +msgstr "Seules les adresses IPv4 sont prises en charge" #: shared-module/displayio/OnDiskBitmap.c #, c-format @@ -1439,11 +1439,11 @@ msgstr "" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" -msgstr "" +msgstr "IP n'accepte que les entiers bruts" #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" -msgstr "" +msgstr "Plus de sockets" #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." @@ -1518,6 +1518,8 @@ msgid "" "Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " "instead" msgstr "" +"Ce portage n'accepte pas de PWM carrier. Précisez plutôt pin, frequency et " +"duty cycle" #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c @@ -1527,6 +1529,8 @@ msgid "" "Port does not accept pins or frequency. Construct and pass a PWMOut Carrier " "instead" msgstr "" +"Ce portage n'accepte pas pins ou frequency. Construisez et passez un PWMOut " +"Carrier à la place" #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" @@ -1590,7 +1594,7 @@ msgstr "Rafraîchissez trop tôt" #: shared-bindings/canio/RemoteTransmissionRequest.c msgid "RemoteTransmissionRequests limited to 8 bytes" -msgstr "" +msgstr "RemoteTransmissionRequests limité à 8 octets" #: shared-bindings/aesio/aes.c msgid "Requested AES mode is unsupported" @@ -1606,7 +1610,7 @@ msgstr "L'entrée de ligne 'Row' doit être un digitalio.DigitalInOut" #: main.c msgid "Running in safe mode! " -msgstr "" +msgstr "Tourne en mode sécurisé " #: shared-module/sdcardio/SDCard.c msgid "SD card CSD format not supported" @@ -1620,12 +1624,12 @@ msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')" #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" -msgstr "" +msgstr "SDIO GetCardInfo erreur %d" #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO Init Error %d" -msgstr "" +msgstr "SDIO Init erreur %d" #: ports/stm/common-hal/busio/SPI.c msgid "SPI Init Error" @@ -1663,11 +1667,11 @@ msgstr "Sérialiseur en cours d'utilisation" #: shared-bindings/ssl/SSLContext.c msgid "Server side context cannot have hostname" -msgstr "" +msgstr "Un contexte niveau serveur ne peut avoir de hostname" #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" -msgstr "" +msgstr "Taille non prise en charge" #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." @@ -1682,7 +1686,7 @@ msgstr "Tranches non supportées" #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "SocketPool can only be used with wifi.radio" -msgstr "" +msgstr "SocketPool ne s'utilise qu'avec wifi.radio" #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" @@ -1730,7 +1734,7 @@ msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30" -msgstr "" +msgstr "La taille de rgb_pins doit être 6, 12, 18, 24 ou 30" #: supervisor/shared/safe_mode.c msgid "" @@ -1785,6 +1789,8 @@ msgstr "Le délai est trop long : le délai maximal est de %d secondes" msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" +"Timer est reservé pour un usage interne - déclarez la broche PWM plus tôt " +"dans le programme" #: supervisor/shared/safe_mode.c msgid "To exit, please reset the board without " @@ -1865,7 +1871,7 @@ msgstr "Impossible d'allouer des tampons pour une conversion signée" #: ports/esp32s2/common-hal/busio/I2C.c msgid "Unable to create lock" -msgstr "" +msgstr "Impossible de créer un verrou" #: shared-module/displayio/I2CDisplay.c #, c-format @@ -1896,11 +1902,11 @@ msgstr "Type inattendu pour l'uuid nrfx" #: ports/esp32s2/common-hal/socketpool/Socket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" -msgstr "" +msgstr "Erreur ESP TLS non gérée %d %d %x %d" #: shared-bindings/wifi/Radio.c msgid "Unknown failure" -msgstr "" +msgstr "Echec inconnu" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format @@ -2020,7 +2026,7 @@ msgstr "" #: shared-bindings/wifi/Radio.c msgid "WiFi password must be between 8 and 63 characters" -msgstr "" +msgstr "Le mot de passe WiFi doit faire entre 8 et 63 caractères" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" @@ -2040,7 +2046,7 @@ msgstr "__init__() doit retourner None" #: py/objtype.c msgid "__init__() should return None, not '%q'" -msgstr "" +msgstr "__init__() doit retourner None, pas '%q'" #: py/objobject.c msgid "__new__ arg must be a user-type" @@ -2085,7 +2091,7 @@ msgstr "l'argument est d'un mauvais type" #: extmod/ulab/code/linalg/linalg.c msgid "argument must be ndarray" -msgstr "" +msgstr "l'argument doit être un ndarray" #: py/argcheck.c shared-bindings/_stage/__init__.c #: shared-bindings/digitalio/DigitalInOut.c shared-bindings/gamepad/GamePad.c @@ -2192,7 +2198,7 @@ msgstr "octets > 8 bits non supporté" #: py/objarray.c msgid "bytes length not a multiple of item size" -msgstr "" +msgstr "bytes length n'est pas un multiple de la taille d'un élément" #: py/objstr.c msgid "bytes value out of range" @@ -2234,7 +2240,7 @@ msgstr "ne peut pas assigner à une expression" #: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c #: shared-module/_pixelbuf/PixelBuf.c msgid "can't convert %q to %q" -msgstr "" +msgstr "impossible de convertir %q en %q" #: py/objstr.c msgid "can't convert '%q' object to %q implicitly" @@ -2242,7 +2248,7 @@ msgstr "impossible de convertir l'objet '%q' en '%q' implicitement" #: py/obj.c msgid "can't convert to %q" -msgstr "" +msgstr "impossible de convertir en %q" #: py/objstr.c msgid "can't convert to str implicitly" @@ -2520,11 +2526,11 @@ msgstr "les exceptions doivent dériver de 'BaseException'" #: shared-bindings/canio/CAN.c msgid "expected '%q' but got '%q'" -msgstr "" +msgstr "'%q' était attendu, mais reçu '%q'" #: shared-bindings/canio/CAN.c msgid "expected '%q' or '%q' but got '%q'" -msgstr "" +msgstr "'%q' ou '%q' était attendu, mais reçu '%q'" #: py/objstr.c msgid "expected ':' after format specifier" @@ -2741,7 +2747,7 @@ msgstr "les valeurs initiales doivent être itérables" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c msgid "initial_value length is wrong" -msgstr "" +msgstr "la longueur de initial_value est incorrecte" #: py/compile.c msgid "inline assembler must be a function" @@ -2818,7 +2824,7 @@ msgstr "spécification de format invalide" #: shared-bindings/wifi/Radio.c msgid "invalid hostname" -msgstr "" +msgstr "hostname incorrect" #: extmod/modussl_axtls.c msgid "invalid key" @@ -2945,7 +2951,7 @@ msgstr "max_length doit être 0-%d lorsque fixed_length est %s" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c msgid "max_length must be > 0" -msgstr "" +msgstr "max_length doit être > 0" #: py/runtime.c msgid "maximum recursion depth exceeded" @@ -3098,7 +3104,7 @@ msgstr "le nombre de points doit être d'au moins 2" #: py/obj.c msgid "object '%q' is not a tuple or list" -msgstr "" +msgstr "l'objet '%q' n'est pas un tuple ou une list" #: py/obj.c msgid "object does not support item assignment" @@ -3134,7 +3140,7 @@ msgstr "objet non itérable" #: py/obj.c msgid "object of type '%q' has no len()" -msgstr "" +msgstr "len() indéfinie pour un objet de type '%q'" #: py/obj.c msgid "object with buffer protocol required" @@ -3187,11 +3193,11 @@ msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "out of range of source" -msgstr "" +msgstr "dépassement des bornes de source" #: shared-bindings/displayio/Bitmap.c msgid "out of range of target" -msgstr "" +msgstr "dépassement des bornes de target" #: py/objint_mpz.c msgid "overflow converting long int to machine word" @@ -3200,7 +3206,7 @@ msgstr "dépassement de capacité en convertissant un entier long en mot machine #: py/modstruct.c #, c-format msgid "pack expected %d items for packing (got %d)" -msgstr "" +msgstr "pack attend %d element(s) (%d reçu)" #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" @@ -3249,7 +3255,7 @@ msgstr "'pop' d'une entrée PulseIn vide" #: ports/stm/common-hal/pulseio/PulseIn.c py/objdict.c py/objlist.c py/objset.c #: shared-bindings/ps2io/Ps2.c msgid "pop from empty %q" -msgstr "" +msgstr "pop sur %q vide" #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" @@ -3269,7 +3275,7 @@ msgstr "pow() avec 3 arguments nécessite des entiers" #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" -msgstr "" +msgstr "bouton boot appuyé lors du démarrage.\n" #: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h #: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h @@ -3277,7 +3283,7 @@ msgstr "" #: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h #: ports/atmel-samd/boards/meowmeow/mpconfigboard.h msgid "pressing both buttons at start up.\n" -msgstr "" +msgstr "les deux boutons appuyés lors du démarrage.\n" #: extmod/modutimeq.c msgid "queue overflow" @@ -3372,7 +3378,7 @@ msgstr "la longueur de sleep ne doit pas être négative" #: extmod/ulab/code/ndarray.c msgid "slice step can't be zero" -msgstr "" +msgstr "le pas 'step' de la tranche ne peut être zéro" #: py/objslice.c py/sequence.c msgid "slice step cannot be zero" @@ -3392,19 +3398,19 @@ msgstr "l'argument de «sort» doit être un ndarray" #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" -msgstr "" +msgstr "le tableau sos doit être de forme (n_section, 6)" #: extmod/ulab/code/filter/filter.c msgid "sos[:, 3] should be all ones" -msgstr "" +msgstr "sos[:, 3] doivent tous être à un" #: extmod/ulab/code/filter/filter.c msgid "sosfilt requires iterable arguments" -msgstr "" +msgstr "sosfilt nécessite des argument itératifs" #: shared-bindings/displayio/Bitmap.c msgid "source palette too large" -msgstr "" +msgstr "la palette source est trop grande" #: py/objstr.c msgid "start/end indices" @@ -3432,7 +3438,7 @@ msgstr "opération de flux non supportée" #: py/objstrunicode.c msgid "string indices must be integers, not %q" -msgstr "" +msgstr "les indices d'une chaîne doivent être des entiers, pas %q" #: py/stream.c msgid "string not supported; use bytes or bytearray" @@ -3485,11 +3491,11 @@ msgstr "'timeout' doit être >= 0.0" #: shared-module/sdcardio/SDCard.c msgid "timeout waiting for v1 card" -msgstr "" +msgstr "Délai d’expiration dépassé en attendant une carte v1" #: shared-module/sdcardio/SDCard.c msgid "timeout waiting for v2 card" -msgstr "" +msgstr "Délai d’expiration dépassé en attendant une carte v2" #: shared-bindings/time/__init__.c msgid "timestamp out of range for platform time_t" @@ -3510,7 +3516,7 @@ msgstr "trop de valeur à dégrouper (%d attendues)" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" -msgstr "" +msgstr "trapz n'est défini que pour des tableaux 1D de longueur égale" #: extmod/ulab/code/linalg/linalg.c msgid "tuple index out of range" @@ -3540,7 +3546,7 @@ msgstr "l'objet de type '%q' n'a pas d'attribut '%q'" #: py/objgenerator.c msgid "type object 'generator' has no attribute '__await__'" -msgstr "" +msgstr "le type 'generator' n'a pas d'attribut '__await__'" #: py/objtype.c msgid "type takes 1 or 3 arguments" @@ -3650,7 +3656,7 @@ msgstr "watchdog timeout doit être supérieur à 0" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "width must be greater than zero" -msgstr "" +msgstr "width doit être plus grand que zero" #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" @@ -3702,15 +3708,15 @@ msgstr "'step' nul" #: extmod/ulab/code/filter/filter.c msgid "zi must be an ndarray" -msgstr "" +msgstr "zi doit être ndarray" #: extmod/ulab/code/filter/filter.c msgid "zi must be of float type" -msgstr "" +msgstr "zi doit être de type float" #: extmod/ulab/code/filter/filter.c msgid "zi must be of shape (n_section, 2)" -msgstr "" +msgstr "zi doit être de forme (n_section, 2)" #~ msgid "Must provide SCK pin" #~ msgstr "Vous devez fournir un code PIN SCK" -- cgit v1.2.3 From 396979a67e538da087136ce01dbc4c7a670bf60e Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Sun, 11 Oct 2020 21:01:12 -0500 Subject: atmel-samd: parallelize lto linking This decreases the link time, especially on desktop machines with many CPU cores. However, it does come at a slight cost in binary size, making the flash section about 200 bytes bigger for circuitplayground_express. Before, linking build-circuitplayground_express/firmware.elf takes 8.8s elapsed time, leaving 3128 bytes free in flash. After, linking build-circuitplayground_express/firmware.elf takes 2.8s elapsed time, leaving 2924 bytes free in flash. (-6 seconds, -204 bytes free) If necessary, we can make this per-board or even per-translation to squeeze full builds. --- ports/atmel-samd/Makefile | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/ports/atmel-samd/Makefile b/ports/atmel-samd/Makefile index 1ee21679d..2593377eb 100644 --- a/ports/atmel-samd/Makefile +++ b/ports/atmel-samd/Makefile @@ -121,7 +121,7 @@ $(echo PERIPHERALS_CHIP_FAMILY=$(PERIPHERALS_CHIP_FAMILY)) ifeq ($(DEBUG), 1) CFLAGS += -ggdb3 -Og # You may want to disable -flto if it interferes with debugging. - CFLAGS += -flto -flto-partition=none + CFLAGS += -flto # You may want to enable these flags to make setting breakpoints easier. # CFLAGS += -fno-inline -fno-ipa-sra ifeq ($(CHIP_FAMILY), samd21) @@ -144,7 +144,7 @@ else CFLAGS += -finline-limit=$(CFLAGS_INLINE_LIMIT) endif - CFLAGS += -flto -flto-partition=none + CFLAGS += -flto ifeq ($(CIRCUITPY_FULL_BUILD),0) CFLAGS += --param inline-unit-growth=15 --param max-inline-insns-auto=20 @@ -197,6 +197,7 @@ endif LDFLAGS = $(CFLAGS) -nostartfiles -Wl,-nostdlib -Wl,-T,$(GENERATED_LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections -specs=nano.specs +LDFLAGS += -flto=$(shell nproc) LIBS := -lgcc -lc # Use toolchain libm if we're not using our own. -- cgit v1.2.3 From aa3c890ead4a006f273d6188a0a9fa2a19550458 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 12 Oct 2020 12:48:47 -0500 Subject: samd: pin: Fix 'undefined reference to pin_PA30' .. when PA30 is IGNOREd --- ports/atmel-samd/common-hal/microcontroller/Pin.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/ports/atmel-samd/common-hal/microcontroller/Pin.c b/ports/atmel-samd/common-hal/microcontroller/Pin.c index bec9dc1e2..7dd87a3b2 100644 --- a/ports/atmel-samd/common-hal/microcontroller/Pin.c +++ b/ports/atmel-samd/common-hal/microcontroller/Pin.c @@ -223,9 +223,11 @@ bool common_hal_mcu_pin_is_free(const mcu_pin_obj_t* pin) { #ifdef MICROPY_HW_NEOPIXEL if (pin == MICROPY_HW_NEOPIXEL) { // Special case for Metro M0 where the NeoPixel is also SWCLK +#ifndef IGNORE_PIN_PA30 if (MICROPY_HW_NEOPIXEL == &pin_PA30 && DSU->STATUSB.bit.DBGPRES == 1) { return false; } +#endif return !neopixel_in_use; } #endif -- cgit v1.2.3 From 4b9fc5de537a166963264cc23eb56f6aea22edde Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 12 Oct 2020 15:46:31 -0500 Subject: samd: update peripherals submodule this is possible now that the undefined reference to pin_PA30 has been resolved. --- ports/atmel-samd/peripherals | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/atmel-samd/peripherals b/ports/atmel-samd/peripherals index a7e39c4d0..710954269 160000 --- a/ports/atmel-samd/peripherals +++ b/ports/atmel-samd/peripherals @@ -1 +1 @@ -Subproject commit a7e39c4d01aa5916015beecb021777617e77b0ad +Subproject commit 710954269a34d1b0c5534965f31689a09cf1d197 -- cgit v1.2.3 From eb0b023dee5e6688ead7d875084086a6eea3ce89 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 13 Oct 2020 14:42:30 -0500 Subject: samd: extend IGNORE_PIN_foo to all sam e5x/e5x pins --- .../common-hal/microcontroller/__init__.c | 77 +++++++++++----------- 1 file changed, 38 insertions(+), 39 deletions(-) diff --git a/ports/atmel-samd/common-hal/microcontroller/__init__.c b/ports/atmel-samd/common-hal/microcontroller/__init__.c index 09212a0d1..50a1ec038 100644 --- a/ports/atmel-samd/common-hal/microcontroller/__init__.c +++ b/ports/atmel-samd/common-hal/microcontroller/__init__.c @@ -275,120 +275,119 @@ STATIC const mp_rom_map_elem_t mcu_pin_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_PB31), MP_ROM_PTR(&pin_PB31) }, #endif -// These are SAMD51 specific so we assume we want them in RAM -#if defined(PIN_PC00) +#if defined(PIN_PC00) && !defined(IGNORE_PIN_PC00) { MP_ROM_QSTR(MP_QSTR_PC00), MP_ROM_PTR(&pin_PC00) }, #endif -#if defined(PIN_PC01) +#if defined(PIN_PC01) && !defined(IGNORE_PIN_PC01) { MP_ROM_QSTR(MP_QSTR_PC01), MP_ROM_PTR(&pin_PC01) }, #endif -#if defined(PIN_PC02) +#if defined(PIN_PC02) && !defined(IGNORE_PIN_PC02) { MP_ROM_QSTR(MP_QSTR_PC02), MP_ROM_PTR(&pin_PC02) }, #endif -#if defined(PIN_PC03) +#if defined(PIN_PC03) && !defined(IGNORE_PIN_PC03) { MP_ROM_QSTR(MP_QSTR_PC03), MP_ROM_PTR(&pin_PC03) }, #endif -#if defined(PIN_PC04) +#if defined(PIN_PC04) && !defined(IGNORE_PIN_PC04) { MP_ROM_QSTR(MP_QSTR_PC04), MP_ROM_PTR(&pin_PC04) }, #endif -#if defined(PIN_PC05) +#if defined(PIN_PC05) && !defined(IGNORE_PIN_PC05) { MP_ROM_QSTR(MP_QSTR_PC05), MP_ROM_PTR(&pin_PC05) }, #endif -#if defined(PIN_PC06) +#if defined(PIN_PC06) && !defined(IGNORE_PIN_PC06) { MP_ROM_QSTR(MP_QSTR_PC06), MP_ROM_PTR(&pin_PC06) }, #endif -#if defined(PIN_PC07) +#if defined(PIN_PC07) && !defined(IGNORE_PIN_PC07) { MP_ROM_QSTR(MP_QSTR_PC07), MP_ROM_PTR(&pin_PC07) }, #endif -#if defined(PIN_PC10) +#if defined(PIN_PC10) && !defined(IGNORE_PIN_PC10) { MP_ROM_QSTR(MP_QSTR_PC10), MP_ROM_PTR(&pin_PC10) }, #endif -#if defined(PIN_PC11) +#if defined(PIN_PC11) && !defined(IGNORE_PIN_PC11) { MP_ROM_QSTR(MP_QSTR_PC11), MP_ROM_PTR(&pin_PC11) }, #endif -#if defined(PIN_PC12) +#if defined(PIN_PC12) && !defined(IGNORE_PIN_PC12) { MP_ROM_QSTR(MP_QSTR_PC12), MP_ROM_PTR(&pin_PC12) }, #endif -#if defined(PIN_PC13) +#if defined(PIN_PC13) && !defined(IGNORE_PIN_PC13) { MP_ROM_QSTR(MP_QSTR_PC13), MP_ROM_PTR(&pin_PC13) }, #endif -#if defined(PIN_PC14) +#if defined(PIN_PC14) && !defined(IGNORE_PIN_PC14) { MP_ROM_QSTR(MP_QSTR_PC14), MP_ROM_PTR(&pin_PC14) }, #endif -#if defined(PIN_PC15) +#if defined(PIN_PC15) && !defined(IGNORE_PIN_PC15) { MP_ROM_QSTR(MP_QSTR_PC15), MP_ROM_PTR(&pin_PC15) }, #endif -#if defined(PIN_PC16) +#if defined(PIN_PC16) && !defined(IGNORE_PIN_PC16) { MP_ROM_QSTR(MP_QSTR_PC16), MP_ROM_PTR(&pin_PC16) }, #endif -#if defined(PIN_PC17) +#if defined(PIN_PC17) && !defined(IGNORE_PIN_PC17) { MP_ROM_QSTR(MP_QSTR_PC17), MP_ROM_PTR(&pin_PC17) }, #endif -#if defined(PIN_PC18) +#if defined(PIN_PC18) && !defined(IGNORE_PIN_PC18) { MP_ROM_QSTR(MP_QSTR_PC18), MP_ROM_PTR(&pin_PC18) }, #endif -#if defined(PIN_PC19) +#if defined(PIN_PC19) && !defined(IGNORE_PIN_PC19) { MP_ROM_QSTR(MP_QSTR_PC19), MP_ROM_PTR(&pin_PC19) }, #endif -#if defined(PIN_PC20) +#if defined(PIN_PC20) && !defined(IGNORE_PIN_PC20) { MP_ROM_QSTR(MP_QSTR_PC20), MP_ROM_PTR(&pin_PC20) }, #endif -#if defined(PIN_PC21) +#if defined(PIN_PC21) && !defined(IGNORE_PIN_PC21) { MP_ROM_QSTR(MP_QSTR_PC21), MP_ROM_PTR(&pin_PC21) }, #endif -#if defined(PIN_PC22) +#if defined(PIN_PC22) && !defined(IGNORE_PIN_PC22) { MP_ROM_QSTR(MP_QSTR_PC22), MP_ROM_PTR(&pin_PC22) }, #endif -#if defined(PIN_PC23) +#if defined(PIN_PC23) && !defined(IGNORE_PIN_PC23) { MP_ROM_QSTR(MP_QSTR_PC23), MP_ROM_PTR(&pin_PC23) }, #endif -#if defined(PIN_PC24) +#if defined(PIN_PC24) && !defined(IGNORE_PIN_PC24) { MP_ROM_QSTR(MP_QSTR_PC24), MP_ROM_PTR(&pin_PC24) }, #endif -#if defined(PIN_PC25) +#if defined(PIN_PC25) && !defined(IGNORE_PIN_PC25) { MP_ROM_QSTR(MP_QSTR_PC25), MP_ROM_PTR(&pin_PC25) }, #endif -#if defined(PIN_PC26) +#if defined(PIN_PC26) && !defined(IGNORE_PIN_PC26) { MP_ROM_QSTR(MP_QSTR_PC26), MP_ROM_PTR(&pin_PC26) }, #endif -#if defined(PIN_PC27) +#if defined(PIN_PC27) && !defined(IGNORE_PIN_PC27) { MP_ROM_QSTR(MP_QSTR_PC27), MP_ROM_PTR(&pin_PC27) }, #endif -#if defined(PIN_PC28) +#if defined(PIN_PC28) && !defined(IGNORE_PIN_PC28) { MP_ROM_QSTR(MP_QSTR_PC28), MP_ROM_PTR(&pin_PC28) }, #endif -#if defined(PIN_PC30) +#if defined(PIN_PC30) && !defined(IGNORE_PIN_PC30) { MP_ROM_QSTR(MP_QSTR_PC30), MP_ROM_PTR(&pin_PC30) }, #endif -#if defined(PIN_PC31) +#if defined(PIN_PC31) && !defined(IGNORE_PIN_PC31) { MP_ROM_QSTR(MP_QSTR_PC31), MP_ROM_PTR(&pin_PC31) }, #endif -#if defined(PIN_PD00) +#if defined(PIN_PD00) && !defined(IGNORE_PIN_PD00) { MP_ROM_QSTR(MP_QSTR_PD00), MP_ROM_PTR(&pin_PD00) }, #endif -#if defined(PIN_PD01) +#if defined(PIN_PD01) && !defined(IGNORE_PIN_PD01) { MP_ROM_QSTR(MP_QSTR_PD01), MP_ROM_PTR(&pin_PD01) }, #endif -#if defined(PIN_PD08) +#if defined(PIN_PD08) && !defined(IGNORE_PIN_PD08) { MP_ROM_QSTR(MP_QSTR_PD08), MP_ROM_PTR(&pin_PD08) }, #endif -#if defined(PIN_PD09) +#if defined(PIN_PD09) && !defined(IGNORE_PIN_PD09) { MP_ROM_QSTR(MP_QSTR_PD09), MP_ROM_PTR(&pin_PD09) }, #endif -#if defined(PIN_PD10) +#if defined(PIN_PD10) && !defined(IGNORE_PIN_PD10) { MP_ROM_QSTR(MP_QSTR_PD10), MP_ROM_PTR(&pin_PD10) }, #endif -#if defined(PIN_PD11) +#if defined(PIN_PD11) && !defined(IGNORE_PIN_PD11) { MP_ROM_QSTR(MP_QSTR_PD11), MP_ROM_PTR(&pin_PD11) }, #endif -#if defined(PIN_PD12) +#if defined(PIN_PD12) && !defined(IGNORE_PIN_PD12) { MP_ROM_QSTR(MP_QSTR_PD12), MP_ROM_PTR(&pin_PD12) }, #endif -#if defined(PIN_PD20) +#if defined(PIN_PD20) && !defined(IGNORE_PIN_PD20) { MP_ROM_QSTR(MP_QSTR_PD20), MP_ROM_PTR(&pin_PD20) }, #endif -#if defined(PIN_PD21) +#if defined(PIN_PD21) && !defined(IGNORE_PIN_PD21) { MP_ROM_QSTR(MP_QSTR_PD21), MP_ROM_PTR(&pin_PD21) }, #endif }; -- cgit v1.2.3 From 194d99f58856c3c0a3d838f99e823a6d0181063c Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Sat, 17 Oct 2020 19:07:15 -0500 Subject: sparkfun_lumidrive: Can't IGNORE pins that are default bus pins The SDA, SCL, and MISO pins were ignored. This error was not diagnosed before now. --- ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h b/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h index d184945f3..80f37429f 100755 --- a/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h +++ b/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h @@ -35,9 +35,6 @@ #define IGNORE_PIN_PA12 1 #define IGNORE_PIN_PA15 1 #define IGNORE_PIN_PA16 1 -#define IGNORE_PIN_PA21 1 -#define IGNORE_PIN_PA22 1 -#define IGNORE_PIN_PA23 1 #define IGNORE_PIN_PA27 1 #define IGNORE_PIN_PA28 1 -- cgit v1.2.3 From fb768dfc14ab3b98905927f984a080e551513ea8 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Sat, 17 Oct 2020 19:08:32 -0500 Subject: samd: AnalogOut: Better handle boards which IGNOREd analog pins --- ports/atmel-samd/common-hal/analogio/AnalogOut.c | 45 +++++++++++++++--------- 1 file changed, 29 insertions(+), 16 deletions(-) diff --git a/ports/atmel-samd/common-hal/analogio/AnalogOut.c b/ports/atmel-samd/common-hal/analogio/AnalogOut.c index fac4c6bfc..1565b0a8f 100644 --- a/ports/atmel-samd/common-hal/analogio/AnalogOut.c +++ b/ports/atmel-samd/common-hal/analogio/AnalogOut.c @@ -44,26 +44,36 @@ #include "hpl/pm/hpl_pm_base.h" #endif +#define HAVE_ANALOGOUT ( \ + (defined(PIN_PA02) && !defined(IGNORE_PA02)) || \ + (defined(SAM_D5X_E5X) && defined(PIN_PA05) && !defined(IGNORE_PA05)) \ +) + void common_hal_analogio_analogout_construct(analogio_analogout_obj_t* self, const mcu_pin_obj_t *pin) { - #if defined(SAMD21) && !defined(PIN_PA02) + #if !HAVE_ANALOGOUT mp_raise_NotImplementedError(translate("No DAC on chip")); #else - if (pin->number != PIN_PA02 - #ifdef SAM_D5X_E5X - && pin->number != PIN_PA05 + + int channel = -1; + + #if defined(PIN_PA02) && !defined(IGNORE_PIN_PA02) + if (pin->number != PIN_PA02) { + channel = 0; + } + #endif + #if defined(PIN_PA05) && defined(PIN_PA05) && !defined(IGNORE_PIN_PA05) + if (pin->number != PIN_PA05) { + channel = 1; + } #endif - ) { + + if(channel == -1) { mp_raise_ValueError(translate("AnalogOut not supported on given pin")); return; } - self->channel = 0; - #ifdef SAM_D5X_E5X - if (pin->number == PIN_PA05) { - self->channel = 1; - } - #endif + self->channel = channel; #ifdef SAM_D5X_E5X hri_mclk_set_APBDMASK_DAC_bit(MCLK); @@ -105,11 +115,15 @@ void common_hal_analogio_analogout_construct(analogio_analogout_obj_t* self, } bool common_hal_analogio_analogout_deinited(analogio_analogout_obj_t *self) { + #if !HAVE_ANALOGOUT + return false; + #else return self->deinited; + #endif } void common_hal_analogio_analogout_deinit(analogio_analogout_obj_t *self) { - #if (defined(SAMD21) && defined(PIN_PA02)) || defined(SAM_D5X_E5X) + #if HAVE_ANALOGOUT if (common_hal_analogio_analogout_deinited(self)) { return; } @@ -130,12 +144,11 @@ void common_hal_analogio_analogout_deinit(analogio_analogout_obj_t *self) { void common_hal_analogio_analogout_set_value(analogio_analogout_obj_t *self, uint16_t value) { - #if defined(SAMD21) && !defined(PIN_PA02) - return; - #endif + #if HAVE_ANALOGOUT // Input is 16 bit so make sure and set LEFTADJ to 1 so it takes the top // bits. This is currently done in asf4_conf/*/hpl_dac_config.h. dac_sync_write(&self->descriptor, self->channel, &value, 1); + #endif } void analogout_reset(void) { @@ -143,7 +156,7 @@ void analogout_reset(void) { // if it was enabled, so do that instead if AudioOut is enabled. #if CIRCUITPY_AUDIOIO audioout_reset(); -#else +#elif HAVE_ANALOGOUT #ifdef SAMD21 while (DAC->STATUS.reg & DAC_STATUS_SYNCBUSY) {} #endif -- cgit v1.2.3 From cc411f47eb009dab7a20f3a220cc569b7e310116 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Sat, 17 Oct 2020 19:10:22 -0500 Subject: samd: Update peripherals submodule (https://github.com/adafruit/samd-peripherals/pull/37) --- ports/atmel-samd/peripherals | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/atmel-samd/peripherals b/ports/atmel-samd/peripherals index 710954269..a7e39c4d0 160000 --- a/ports/atmel-samd/peripherals +++ b/ports/atmel-samd/peripherals @@ -1 +1 @@ -Subproject commit 710954269a34d1b0c5534965f31689a09cf1d197 +Subproject commit a7e39c4d01aa5916015beecb021777617e77b0ad -- cgit v1.2.3 From 852c57c6614011ec63b4bb99a12e53790a0b38cd Mon Sep 17 00:00:00 2001 From: Senuros Date: Sun, 18 Oct 2020 03:40:02 +0200 Subject: Adding some more german translations --- locale/de_DE.po | 52 +++++++++++++++++++++++++++------------------------- 1 file changed, 27 insertions(+), 25 deletions(-) diff --git a/locale/de_DE.po b/locale/de_DE.po index 89969e874..652971566 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -149,7 +149,7 @@ msgstr "" #: py/obj.c msgid "'%q' object is not subscriptable" -msgstr "" +msgstr "'%q' Objekt hat keine '__getitem__'-Methode (not subscriptable)" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format @@ -1986,14 +1986,16 @@ msgstr "WatchDogTimer läuft aktuell nicht" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET" msgstr "" +"WatchDogTimer.mode kann nicht geändert werden, nachdem " +"er auf WatchDogMode.RESET gesetzt wurde" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.timeout must be greater than 0" -msgstr "" +msgstr "WatchDogTimer.timeout muss größer als 0 sein" #: supervisor/shared/safe_mode.c msgid "Watchdog timer expired." -msgstr "" +msgstr "Watchdog timer abgelaufen " #: py/builtinhelp.c #, c-format @@ -2013,11 +2015,11 @@ msgstr "" #: shared-bindings/wifi/Radio.c msgid "WiFi password must be between 8 and 63 characters" -msgstr "" +msgstr "WiFi Passwort muss zwischen 8 und 63 Zeichen lang sein" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" -msgstr "Schreiben nicht unterstüzt für die Characteristic" +msgstr "Schreiben nicht unterstüzt für diese Charakteristik" #: supervisor/shared/safe_mode.c msgid "You are in safe mode: something unanticipated happened.\n" @@ -2035,7 +2037,7 @@ msgstr "__init__() sollte None zurückgeben" #: py/objtype.c msgid "__init__() should return None, not '%q'" -msgstr "" +msgstr "__init__() sollte None zurückgeben, nicht '%q'" #: py/objobject.c msgid "__new__ arg must be a user-type" @@ -2080,12 +2082,12 @@ msgstr "Argument hat falschen Typ" #: extmod/ulab/code/linalg/linalg.c msgid "argument must be ndarray" -msgstr "" +msgstr "Argument muss ein ndarray sein" #: py/argcheck.c shared-bindings/_stage/__init__.c #: shared-bindings/digitalio/DigitalInOut.c shared-bindings/gamepad/GamePad.c msgid "argument num/types mismatch" -msgstr "Anzahl/Type der Argumente passen nicht" +msgstr "Anzahl/Typen der Argumente passen nicht" #: py/runtime.c msgid "argument should be a '%q' not a '%q'" @@ -2187,7 +2189,7 @@ msgstr "bytes mit mehr als 8 bits werden nicht unterstützt" #: py/objarray.c msgid "bytes length not a multiple of item size" -msgstr "" +msgstr "Byte-Länge ist kein vielfaches der Item-Größe" #: py/objstr.c msgid "bytes value out of range" @@ -2230,7 +2232,7 @@ msgstr "kann keinem Ausdruck zuweisen" #: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c #: shared-module/_pixelbuf/PixelBuf.c msgid "can't convert %q to %q" -msgstr "" +msgstr "kann %q nicht zu %q konvertieren" #: py/objstr.c msgid "can't convert '%q' object to %q implicitly" @@ -2238,7 +2240,7 @@ msgstr "Kann '%q' Objekt nicht implizit nach %q konvertieren" #: py/obj.c msgid "can't convert to %q" -msgstr "" +msgstr "kann nicht zu %q konvertieren" #: py/objstr.c msgid "can't convert to str implicitly" @@ -2292,7 +2294,7 @@ msgstr "" #: shared-module/sdcardio/SDCard.c msgid "can't set 512 block size" -msgstr "" +msgstr "Kann Blockgröße von 512 nicht setzen" #: py/objnamedtuple.c msgid "can't set attribute" @@ -2728,11 +2730,11 @@ msgstr "Indizes müssen Integer, Slices oder Boolesche Listen sein" #: extmod/ulab/code/approx/approx.c msgid "initial values must be iterable" -msgstr "" +msgstr "Ausgangswerte müssen iterierbar sein" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c msgid "initial_value length is wrong" -msgstr "" +msgstr "Länge von initial_value ist falsch" #: py/compile.c msgid "inline assembler must be a function" @@ -3126,7 +3128,7 @@ msgstr "Objekt nicht iterierbar" #: py/obj.c msgid "object of type '%q' has no len()" -msgstr "" +msgstr "Object vom Typ '%q' hat kein len()" #: py/obj.c msgid "object with buffer protocol required" @@ -3180,11 +3182,11 @@ msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "out of range of source" -msgstr "" +msgstr "Außerhalb des Bereichs der Quelle" #: shared-bindings/displayio/Bitmap.c msgid "out of range of target" -msgstr "" +msgstr "Außerhalb des Bereichs des Ziels" #: py/objint_mpz.c msgid "overflow converting long int to machine word" @@ -3396,7 +3398,7 @@ msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "source palette too large" -msgstr "" +msgstr "Quell-Palette zu groß" #: py/objstr.c msgid "start/end indices" @@ -3424,7 +3426,7 @@ msgstr "stream operation ist nicht unterstützt" #: py/objstrunicode.c msgid "string indices must be integers, not %q" -msgstr "" +msgstr "String Indizes müssen Integer sein, nicht %q" #: py/stream.c msgid "string not supported; use bytes or bytearray" @@ -3465,7 +3467,7 @@ msgstr "time.struct_time() nimmt eine 9-Sequenz an" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" -msgstr "" +msgstr "Das Zeitlimit hat den maximal zulässigen Wert überschritten" #: shared-bindings/busio/UART.c msgid "timeout must be 0.0-100.0 seconds" @@ -3477,11 +3479,11 @@ msgstr "timeout muss >= 0.0 sein" #: shared-module/sdcardio/SDCard.c msgid "timeout waiting for v1 card" -msgstr "" +msgstr "Zeitlimit beim warten auf v1 Karte" #: shared-module/sdcardio/SDCard.c msgid "timeout waiting for v2 card" -msgstr "" +msgstr "Zeitlimit beim warten auf v2 Karte" #: shared-bindings/time/__init__.c msgid "timestamp out of range for platform time_t" @@ -3532,7 +3534,7 @@ msgstr "Typ vom Objekt '%q' hat kein Attribut '%q'" #: py/objgenerator.c msgid "type object 'generator' has no attribute '__await__'" -msgstr "" +msgstr "Das Typ-Objekt 'generator' hat kein Attribut '__await__'" #: py/objtype.c msgid "type takes 1 or 3 arguments" @@ -3577,7 +3579,7 @@ msgstr "unbekannter Konvertierungs specifier %c" #: py/objstr.c msgid "unknown format code '%c' for object of type '%q'" -msgstr "" +msgstr "Unbekannter Formatcode '%c' für Objekt vom Typ '%q'" #: py/compile.c msgid "unknown type" @@ -3638,7 +3640,7 @@ msgstr "value_count muss größer als 0 sein" #: extmod/ulab/code/linalg/linalg.c msgid "vectors must have same lengths" -msgstr "" +msgstr "Vektoren müssen die selbe Länge haben" #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" -- cgit v1.2.3 From d6805c0dd40e142654fd45e4d6d43af08871a2c8 Mon Sep 17 00:00:00 2001 From: askpatricw <4002194+askpatrickw@users.noreply.github.com> Date: Sun, 18 Oct 2020 17:15:59 -0700 Subject: SDA and SCL were flipped --- ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c index 967f5e8d9..a1036f850 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/pins.c @@ -46,11 +46,11 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO43) }, { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) }, - { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO38) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO38) }, { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) }, { MP_ROM_QSTR(MP_QSTR_D21), MP_ROM_PTR(&pin_GPIO38) }, - { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO33) }, { MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) }, { MP_ROM_QSTR(MP_QSTR_D20), MP_ROM_PTR(&pin_GPIO33) }, -- cgit v1.2.3 From d2dada869cc3ab85c7ed5b81d9928d6b8dd3282b Mon Sep 17 00:00:00 2001 From: Jensen Kuras Date: Mon, 19 Oct 2020 17:27:01 -0500 Subject: displayio: Update docs for ColorConverter's make_opaque Co-authored-by: Scott Shawcroft --- shared-bindings/displayio/ColorConverter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/shared-bindings/displayio/ColorConverter.c b/shared-bindings/displayio/ColorConverter.c index e47a961a5..0e6e9bfd9 100644 --- a/shared-bindings/displayio/ColorConverter.c +++ b/shared-bindings/displayio/ColorConverter.c @@ -122,7 +122,7 @@ STATIC mp_obj_t displayio_colorconverter_make_transparent(mp_obj_t self_in, mp_o } MP_DEFINE_CONST_FUN_OBJ_2(displayio_colorconverter_make_transparent_obj, displayio_colorconverter_make_transparent); -//| def make_opaque(self) -> None: +//| def make_opaque(self, pixel: int) -> None: //| """Sets a pixel to opaque.""" //| STATIC mp_obj_t displayio_colorconverter_make_opaque(mp_obj_t self_in, mp_obj_t transparent_color_obj) { -- cgit v1.2.3 From 13387121fe653c3380e4248abc2db69687cc27cf Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Tue, 20 Oct 2020 09:23:45 +0530 Subject: Update readme --- README.rst | 1 - 1 file changed, 1 deletion(-) diff --git a/README.rst b/README.rst index 99a35d6da..d21e8d8d3 100644 --- a/README.rst +++ b/README.rst @@ -95,7 +95,6 @@ Differences from `MicroPython `__ CircuitPython: - Supports native USB on all boards, allowing file editing without special tools. -- Support status for ports is different. - Floats (aka decimals) are enabled for all builds. - Error messages are translated into 10+ languages. - Does not support concurrency within Python (including interrupts and threading). Some concurrency -- cgit v1.2.3 From a2fce305d6b9407ad6af4e6d4721c47fc9e264d4 Mon Sep 17 00:00:00 2001 From: Targett363 Date: Tue, 20 Oct 2020 10:42:14 +0100 Subject: Replacing placeholder PIDs with correct PIDs --- ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk | 2 +- ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk index e307d7d62..f88cb75d2 100644 --- a/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk +++ b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.mk @@ -1,5 +1,5 @@ USB_VID = 0x1209 -USB_PID = 0x0011 +USB_PID = 0x3252 USB_PRODUCT = "Targett Module Clip w/Wroom" USB_MANUFACTURER = "Targett" diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk index aff5ffd6c..e2dc15584 100644 --- a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk +++ b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.mk @@ -1,5 +1,5 @@ USB_VID = 0x1209 -USB_PID = 0x0012 +USB_PID = 0x3253 USB_PRODUCT = "Targett Module Clip w/Wrover" USB_MANUFACTURER = "Targett" -- cgit v1.2.3 From 543073b1986cf34530fd07644fbbe392075bf7cf Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 20 Oct 2020 08:13:11 -0500 Subject: zh_Latn_pinyin: Use ASCII alternatives to fullwidth chars --- locale/zh_Latn_pinyin.po | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 365b1e498..892b9ac58 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -3277,7 +3277,7 @@ msgstr "yòubiān bìxū shì ndarray huò biāoliàng" #: py/objstr.c msgid "rsplit(None,n)" -msgstr "Rchāifēn(wú ，N）" +msgstr "Rchāifēn(wú,N)" #: shared-bindings/audiocore/RawSample.c msgid "" -- cgit v1.2.3 From 1eab0692b50f05f6b8194897386cda7720634fe6 Mon Sep 17 00:00:00 2001 From: Christian Walther Date: Tue, 20 Oct 2020 16:37:24 +0200 Subject: Fix missing `nproc` on macOS. 396979a breaks building on macOS: `nproc` is a Linux thing, use a cross-platform alternative. --- ports/atmel-samd/Makefile | 2 +- py/mkenv.mk | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/ports/atmel-samd/Makefile b/ports/atmel-samd/Makefile index 2593377eb..111f12b4e 100644 --- a/ports/atmel-samd/Makefile +++ b/ports/atmel-samd/Makefile @@ -197,7 +197,7 @@ endif LDFLAGS = $(CFLAGS) -nostartfiles -Wl,-nostdlib -Wl,-T,$(GENERATED_LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections -specs=nano.specs -LDFLAGS += -flto=$(shell nproc) +LDFLAGS += -flto=$(shell $(NPROC)) LIBS := -lgcc -lc # Use toolchain libm if we're not using our own. diff --git a/py/mkenv.mk b/py/mkenv.mk index b76dd60f8..cb678e8e7 100644 --- a/py/mkenv.mk +++ b/py/mkenv.mk @@ -55,6 +55,8 @@ PYTHON3 ?= python3 RM = rm RSYNC = rsync SED = sed +# Linux has 'nproc', macOS has 'sysctl -n hw.logicalcpu', this is cross-platform +NPROC = $(PYTHON) -c 'import multiprocessing as mp; print(mp.cpu_count())' AS = $(CROSS_COMPILE)as CC = $(CROSS_COMPILE)gcc -- cgit v1.2.3 From 8beb36c240d162bfb3f12dceb46d409eee26722d Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Tue, 20 Oct 2020 09:24:03 -0700 Subject: Use one lto partition This leads to smaller code size at the expense of slower linking. We can turn partitioning back on with GCC10 because it produces smaller code. --- ports/atmel-samd/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/ports/atmel-samd/Makefile b/ports/atmel-samd/Makefile index 2593377eb..817cc9e3b 100644 --- a/ports/atmel-samd/Makefile +++ b/ports/atmel-samd/Makefile @@ -121,7 +121,7 @@ $(echo PERIPHERALS_CHIP_FAMILY=$(PERIPHERALS_CHIP_FAMILY)) ifeq ($(DEBUG), 1) CFLAGS += -ggdb3 -Og # You may want to disable -flto if it interferes with debugging. - CFLAGS += -flto + CFLAGS += -flto -flto-partition=none # You may want to enable these flags to make setting breakpoints easier. # CFLAGS += -fno-inline -fno-ipa-sra ifeq ($(CHIP_FAMILY), samd21) @@ -144,7 +144,7 @@ else CFLAGS += -finline-limit=$(CFLAGS_INLINE_LIMIT) endif - CFLAGS += -flto + CFLAGS += -flto -flto-partition=none ifeq ($(CIRCUITPY_FULL_BUILD),0) CFLAGS += --param inline-unit-growth=15 --param max-inline-insns-auto=20 -- cgit v1.2.3 From c58b0adf64a99916a3b360d62dee3b2964f3876b Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Tue, 20 Oct 2020 14:49:57 -0700 Subject: Reset sta_mode and ap_mode flags --- ports/esp32s2/common-hal/wifi/__init__.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/ports/esp32s2/common-hal/wifi/__init__.c b/ports/esp32s2/common-hal/wifi/__init__.c index 5c8d2e952..65186e9b1 100644 --- a/ports/esp32s2/common-hal/wifi/__init__.c +++ b/ports/esp32s2/common-hal/wifi/__init__.c @@ -100,6 +100,13 @@ void common_hal_wifi_init(void) { wifi_radio_obj_t* self = &common_hal_wifi_radio_obj; self->netif = esp_netif_create_default_wifi_sta(); + // Even though we just called esp_netif_create_default_wifi_sta, + // station mode isn't actually set until esp_wifi_set_mode() + // is called and the configuration is loaded via esp_wifi_set_config(). + // Set both convienence flags to false so it's not forgotten. + self->sta_mode = 0; + self->ap_mode = 0; + self->event_group_handle = xEventGroupCreateStatic(&self->event_group); ESP_ERROR_CHECK(esp_event_handler_instance_register(WIFI_EVENT, ESP_EVENT_ANY_ID, -- cgit v1.2.3 From e202da4dadeadfe22d30251d99c5247f024bd746 Mon Sep 17 00:00:00 2001 From: "Ryan T. Hamilton" Date: Tue, 20 Oct 2020 15:14:35 -0700 Subject: Change comment wording --- ports/esp32s2/common-hal/wifi/__init__.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/esp32s2/common-hal/wifi/__init__.c b/ports/esp32s2/common-hal/wifi/__init__.c index 65186e9b1..833ef0623 100644 --- a/ports/esp32s2/common-hal/wifi/__init__.c +++ b/ports/esp32s2/common-hal/wifi/__init__.c @@ -101,7 +101,7 @@ void common_hal_wifi_init(void) { self->netif = esp_netif_create_default_wifi_sta(); // Even though we just called esp_netif_create_default_wifi_sta, - // station mode isn't actually set until esp_wifi_set_mode() + // station mode isn't actually ready for use until esp_wifi_set_mode() // is called and the configuration is loaded via esp_wifi_set_config(). // Set both convienence flags to false so it's not forgotten. self->sta_mode = 0; -- cgit v1.2.3 From ea6ef8b1423c653a461371e1bc105b6ff75d88b5 Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Tue, 20 Oct 2020 00:40:50 +0200 Subject: Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 6 +++++- locale/cs.po | 6 +++++- locale/de_DE.po | 10 +++++++--- locale/el.po | 6 +++++- locale/es.po | 6 +++++- locale/fil.po | 6 +++++- locale/fr.po | 6 +++++- locale/hi.po | 6 +++++- locale/it_IT.po | 6 +++++- locale/ja.po | 6 +++++- locale/ko.po | 6 +++++- locale/nl.po | 6 +++++- locale/pl.po | 6 +++++- locale/pt_BR.po | 6 +++++- locale/sv.po | 6 +++++- locale/zh_Latn_pinyin.po | 6 +++++- 16 files changed, 82 insertions(+), 18 deletions(-) diff --git a/locale/ID.po b/locale/ID.po index f35afea66..ef090afec 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-10-10 23:51+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" @@ -2154,6 +2154,10 @@ msgstr "" msgid "buffer too small" msgstr "" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index d7caa43ea..f86f0fcfd 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-05-24 03:22+0000\n" "Last-Translator: dronecz \n" "Language-Team: LANGUAGE \n" @@ -2111,6 +2111,10 @@ msgstr "" msgid "buffer too small" msgstr "" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 652971566..d400f0a76 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-06-16 18:24+0000\n" "Last-Translator: Andreas Buchen \n" "Language: de_DE\n" @@ -1986,8 +1986,8 @@ msgstr "WatchDogTimer läuft aktuell nicht" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET" msgstr "" -"WatchDogTimer.mode kann nicht geändert werden, nachdem " -"er auf WatchDogMode.RESET gesetzt wurde" +"WatchDogTimer.mode kann nicht geändert werden, nachdem er auf WatchDogMode." +"RESET gesetzt wurde" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.timeout must be greater than 0" @@ -2170,6 +2170,10 @@ msgstr "Puffersegmente müssen gleich lang sein" msgid "buffer too small" msgstr "Der Puffer ist zu klein" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "Tasten müssen digitalio.DigitalInOut sein" diff --git a/locale/el.po b/locale/el.po index 42b083e3c..676c54c7b 100644 --- a/locale/el.po +++ b/locale/el.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -2106,6 +2106,10 @@ msgstr "" msgid "buffer too small" msgstr "" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "" diff --git a/locale/es.po b/locale/es.po index db20dea12..50c3620d6 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-10-17 02:31+0000\n" "Last-Translator: Alvaro Figueroa \n" "Language-Team: \n" @@ -2169,6 +2169,10 @@ msgstr "Las secciones del buffer necesitan tener longitud igual" msgid "buffer too small" msgstr "buffer demasiado pequeño" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "los botones necesitan ser digitalio.DigitalInOut" diff --git a/locale/fil.po b/locale/fil.po index ecda65cb2..f90f5bbed 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy \n" "Language-Team: fil\n" @@ -2139,6 +2139,10 @@ msgstr "aarehas na haba dapat ang buffer slices" msgid "buffer too small" msgstr "masyadong maliit ang buffer" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "" diff --git a/locale/fr.po b/locale/fr.po index a8a382c70..d1e8b268d 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-10-17 15:35+0000\n" "Last-Translator: Antonin ENFRUN \n" "Language: fr\n" @@ -2179,6 +2179,10 @@ msgstr "les tranches de tampon doivent être de longueurs égales" msgid "buffer too small" msgstr "tampon trop petit" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "les boutons doivent être des digitalio.DigitalInOut" diff --git a/locale/hi.po b/locale/hi.po index 88c795a7c..485ce6398 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -2106,6 +2106,10 @@ msgstr "" msgid "buffer too small" msgstr "" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index 1650a5bdb..9d299b49b 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin \n" "Language-Team: \n" @@ -2144,6 +2144,10 @@ msgstr "slice del buffer devono essere della stessa lunghezza" msgid "buffer too small" msgstr "buffer troppo piccolo" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "" diff --git a/locale/ja.po b/locale/ja.po index 01900d9a8..ac883044c 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-09-25 18:20+0000\n" "Last-Translator: Taku Fukada \n" "Language-Team: none\n" @@ -2131,6 +2131,10 @@ msgstr "バッファのスライスは同じ長さでなければなりません msgid "buffer too small" msgstr "" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "buttonsはdigitalio.DigitalInOutでなければなりません" diff --git a/locale/ko.po b/locale/ko.po index a9bc60f78..dea656591 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-10-05 12:12+0000\n" "Last-Translator: Michal Čihař \n" "Language-Team: LANGUAGE \n" @@ -2112,6 +2112,10 @@ msgstr "" msgid "buffer too small" msgstr "" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index edcaefb83..ed75cdd8c 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-09-09 16:05+0000\n" "Last-Translator: Jelle Jager \n" "Language-Team: none\n" @@ -2158,6 +2158,10 @@ msgstr "buffer slices moeten van gelijke grootte zijn" msgid "buffer too small" msgstr "buffer te klein" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "buttons moeten digitalio.DigitalInOut zijn" diff --git a/locale/pl.po b/locale/pl.po index b79fcc606..ec5fe5a65 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-09-29 01:39+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" @@ -2128,6 +2128,10 @@ msgstr "fragmenty bufora muszą mieć tę samą długość" msgid "buffer too small" msgstr "zbyt mały bufor" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "buttons musi być digitalio.DigitalInOut" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 240a56104..b21b728ea 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-10-16 17:01+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" @@ -2177,6 +2177,10 @@ msgstr "as fatias do buffer devem ter o mesmo comprimento" msgid "buffer too small" msgstr "o buffer é muito pequeno" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "os botões devem ser digitalio.DigitalInOut" diff --git a/locale/sv.po b/locale/sv.po index f3bf71558..42e8ce2c4 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-10-14 18:12+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" @@ -2155,6 +2155,10 @@ msgstr "buffertsegmenten måste vara lika långa" msgid "buffer too small" msgstr "buffert för liten" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "buttons måste vara digitalio.DigitalInOut" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 892b9ac58..42c6e39d5 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-10-16 13:56-0500\n" "PO-Revision-Date: 2020-10-17 02:31+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -2147,6 +2147,10 @@ msgstr "huǎnchōng qū qiēpiàn bìxū chángdù xiāngděng" msgid "buffer too small" msgstr "huǎnchōng qū tài xiǎo" +#: shared-bindings/socketpool/Socket.c +msgid "buffer too small for requested bytes" +msgstr "" + #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "ànniǔ bìxū shì digitalio.DigitalInOut" -- cgit v1.2.3 From c65b0985b897b21129356cad95df75d9698478eb Mon Sep 17 00:00:00 2001 From: Wellington Terumi Uemura Date: Tue, 20 Oct 2020 02:57:36 +0000 Subject: Translated using Weblate (Portuguese (Brazil)) Currently translated at 100.0% (835 of 835 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pt_BR/ --- locale/pt_BR.po | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/locale/pt_BR.po b/locale/pt_BR.po index b21b728ea..20e7d6896 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-16 13:56-0500\n" -"PO-Revision-Date: 2020-10-16 17:01+0000\n" +"PO-Revision-Date: 2020-10-20 17:13+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.3.1-dev\n" +"X-Generator: Weblate 4.3.1\n" #: main.c msgid "" @@ -2179,7 +2179,7 @@ msgstr "o buffer é muito pequeno" #: shared-bindings/socketpool/Socket.c msgid "buffer too small for requested bytes" -msgstr "" +msgstr "o buffer é pequeno demais para os bytes requisitados" #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" -- cgit v1.2.3 From 41d02fd53d39b01deff2d8cc0da83f1407cdf888 Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Tue, 20 Oct 2020 19:42:08 +0200 Subject: Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 6 +++++- locale/cs.po | 6 +++++- locale/de_DE.po | 6 +++++- locale/el.po | 6 +++++- locale/es.po | 6 +++++- locale/fil.po | 6 +++++- locale/fr.po | 6 +++++- locale/hi.po | 6 +++++- locale/it_IT.po | 6 +++++- locale/ja.po | 6 +++++- locale/ko.po | 6 +++++- locale/nl.po | 6 +++++- locale/pl.po | 6 +++++- locale/pt_BR.po | 6 +++++- locale/sv.po | 6 +++++- locale/zh_Latn_pinyin.po | 6 +++++- 16 files changed, 80 insertions(+), 16 deletions(-) diff --git a/locale/ID.po b/locale/ID.po index ef090afec..958ff1e6b 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-10-10 23:51+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" @@ -1431,6 +1431,10 @@ msgstr "" "Hanya monokrom, 4bpp atau 8bpp yang diindeks, dan 16bpp atau lebih yang " "didukung: %d bpp diberikan" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index f86f0fcfd..6a3d00d99 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-05-24 03:22+0000\n" "Last-Translator: dronecz \n" "Language-Team: LANGUAGE \n" @@ -1408,6 +1408,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index d400f0a76..e54b670a9 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-06-16 18:24+0000\n" "Last-Translator: Andreas Buchen \n" "Language: de_DE\n" @@ -1433,6 +1433,10 @@ msgstr "" "Nur monochrome, indizierte 4bpp oder 8bpp, und 16bpp oder größere BMPs " "unterstützt: %d bpp wurden gegeben" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" diff --git a/locale/el.po b/locale/el.po index 676c54c7b..5e55065b3 100644 --- a/locale/el.po +++ b/locale/el.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -1403,6 +1403,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" diff --git a/locale/es.po b/locale/es.po index 50c3620d6..8cd5e6c22 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-10-17 02:31+0000\n" "Last-Translator: Alvaro Figueroa \n" "Language-Team: \n" @@ -1432,6 +1432,10 @@ msgstr "" "Solo se admiten BMP monocromáticos, indexados de 4 bpp u 8 bpp y 16 bpp o " "más: %d bpp proporcionados" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "Solo se aceptan enteros crudos para ip" diff --git a/locale/fil.po b/locale/fil.po index f90f5bbed..7a91f5c85 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy \n" "Language-Team: fil\n" @@ -1421,6 +1421,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" diff --git a/locale/fr.po b/locale/fr.po index d1e8b268d..9bfc14428 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-10-17 15:35+0000\n" "Last-Translator: Antonin ENFRUN \n" "Language: fr\n" @@ -1437,6 +1437,10 @@ msgstr "" "Prise en charge uniquement des monochromes, 4 bpp ou 8 bpp indexés et 16 bpp " "ou plus : %d bpp fournis" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "IP n'accepte que les entiers bruts" diff --git a/locale/hi.po b/locale/hi.po index 485ce6398..bd6d5395b 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -1403,6 +1403,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index 9d299b49b..9ed3bb1e1 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin \n" "Language-Team: \n" @@ -1426,6 +1426,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" diff --git a/locale/ja.po b/locale/ja.po index ac883044c..8c3751c8e 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-09-25 18:20+0000\n" "Last-Translator: Taku Fukada \n" "Language-Team: none\n" @@ -1420,6 +1420,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" diff --git a/locale/ko.po b/locale/ko.po index dea656591..9c5750b9f 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-10-05 12:12+0000\n" "Last-Translator: Michal Čihař \n" "Language-Team: LANGUAGE \n" @@ -1408,6 +1408,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index ed75cdd8c..ca7530c0f 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-09-09 16:05+0000\n" "Last-Translator: Jelle Jager \n" "Language-Team: none\n" @@ -1426,6 +1426,10 @@ msgstr "" "Alleen monochrome en 4bpp of 8bpp, en 16bpp of grotere geïndiceerde BMP's " "zijn ondersteund: %d bpp is gegeven" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" diff --git a/locale/pl.po b/locale/pl.po index ec5fe5a65..f6292a0a3 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-09-29 01:39+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" @@ -1419,6 +1419,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 20e7d6896..94ec881cb 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-10-20 17:13+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" @@ -1434,6 +1434,10 @@ msgstr "" "São compatíveis apenas os BMPs monocromáticos, indexados em 4bpp ou 8bpp e " "16bpp ou superior: determinado %d bpp" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "Apenas o int bruto é compatível para o ip" diff --git a/locale/sv.po b/locale/sv.po index 42e8ce2c4..d4be9db17 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-10-14 18:12+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" @@ -1424,6 +1424,10 @@ msgstr "" "Endast monokrom, indexerad 4 bpp eller 8 bpp och 16 bpp eller högre BMP: er " "stöds: %d bpp angiven" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "Endast raw int stöds för ip" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 42c6e39d5..6ad1c722d 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 13:56-0500\n" +"POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-10-17 02:31+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -1421,6 +1421,10 @@ msgstr "" "Jǐn zhīchí dān sè, suǒyǐn wéi 4bpp huò 8bpp yǐjí 16bpp huò gèng gāo de BMP: " "Gěi chū %d bpp" +#: shared-module/displayio/ColorConverter.c +msgid "Only one color can be transparent at a time" +msgstr "" + #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "Ip jǐn zhīchí raw int" -- cgit v1.2.3 From 7d1c1c815df859eadbe180f4ca57df9a38bdec75 Mon Sep 17 00:00:00 2001 From: Wellington Terumi Uemura Date: Wed, 21 Oct 2020 04:15:35 +0000 Subject: Translated using Weblate (Portuguese (Brazil)) Currently translated at 100.0% (836 of 836 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pt_BR/ --- locale/pt_BR.po | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 94ec881cb..b80afeb1a 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-16 19:50-0500\n" -"PO-Revision-Date: 2020-10-20 17:13+0000\n" +"PO-Revision-Date: 2020-10-21 19:58+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -1436,7 +1436,7 @@ msgstr "" #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" -msgstr "" +msgstr "Apenas uma cor pode ser transparente de cada vez" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" -- cgit v1.2.3 From 05e4172ea0999a03ec8d59b509de1ee0307515e4 Mon Sep 17 00:00:00 2001 From: Jonny Bergdahl Date: Wed, 21 Oct 2020 21:51:47 +0000 Subject: Translated using Weblate (Swedish) Currently translated at 100.0% (836 of 836 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/sv/ --- locale/sv.po | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/locale/sv.po b/locale/sv.po index d4be9db17..22007e11f 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-16 19:50-0500\n" -"PO-Revision-Date: 2020-10-14 18:12+0000\n" +"PO-Revision-Date: 2020-10-22 01:12+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" "Language: sv\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.3-dev\n" +"X-Generator: Weblate 4.3.1\n" #: main.c msgid "" @@ -961,7 +961,7 @@ msgstr "Hårdvaran används redan, prova alternativa pinnar" #: shared-bindings/wifi/Radio.c msgid "Hostname must be between 1 and 253 characters" -msgstr "" +msgstr "Hostname måste vara mellan 1 och 253 tecken" #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" @@ -1426,7 +1426,7 @@ msgstr "" #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" -msgstr "" +msgstr "Bara en färg kan vara genomskinlig i taget" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" @@ -2161,7 +2161,7 @@ msgstr "buffert för liten" #: shared-bindings/socketpool/Socket.c msgid "buffer too small for requested bytes" -msgstr "" +msgstr "buffertför liten för begärd längd" #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" @@ -2795,7 +2795,7 @@ msgstr "ogiltig formatspecificerare" #: shared-bindings/wifi/Radio.c msgid "invalid hostname" -msgstr "" +msgstr "Ogiltigt värdnamn" #: extmod/modussl_axtls.c msgid "invalid key" -- cgit v1.2.3 From f431f859e74a92099079bd8753c2319566dbf3c7 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Thu, 22 Oct 2020 21:32:44 +0530 Subject: Initial support for native touchio --- ports/esp32s2/common-hal/touchio/TouchIn.c | 109 ++++++++++++++++++++++++++++ ports/esp32s2/common-hal/touchio/TouchIn.h | 42 +++++++++++ ports/esp32s2/common-hal/touchio/__init__.c | 1 + ports/esp32s2/mpconfigport.mk | 4 + ports/esp32s2/peripherals/pins.c | 95 +++++++++++++----------- ports/esp32s2/peripherals/pins.h | 1 + 6 files changed, 208 insertions(+), 44 deletions(-) create mode 100644 ports/esp32s2/common-hal/touchio/TouchIn.c create mode 100644 ports/esp32s2/common-hal/touchio/TouchIn.h create mode 100644 ports/esp32s2/common-hal/touchio/__init__.c diff --git a/ports/esp32s2/common-hal/touchio/TouchIn.c b/ports/esp32s2/common-hal/touchio/TouchIn.c new file mode 100644 index 000000000..7d30d1a32 --- /dev/null +++ b/ports/esp32s2/common-hal/touchio/TouchIn.c @@ -0,0 +1,109 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2016 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/touchio/TouchIn.h" +#include "py/runtime.h" + +#include "driver/touch_pad.h" + +static const touch_pad_t touch_pad[] = { + TOUCH_PAD_NUM1, + TOUCH_PAD_NUM2, + TOUCH_PAD_NUM3, + TOUCH_PAD_NUM4, + TOUCH_PAD_NUM5, + TOUCH_PAD_NUM6, + TOUCH_PAD_NUM7, + TOUCH_PAD_NUM8, + TOUCH_PAD_NUM9, + TOUCH_PAD_NUM10, + TOUCH_PAD_NUM11, + TOUCH_PAD_NUM12, + TOUCH_PAD_NUM13, + TOUCH_PAD_NUM14 +}; + +static uint16_t get_raw_reading(touchio_touchin_obj_t *self) { + uint32_t touch_value; + touch_pad_read_raw_data(touch_pad[self->pin], &touch_value); + return touch_value; +} + +void common_hal_touchio_touchin_construct(touchio_touchin_obj_t* self, + const mcu_pin_obj_t *pin) { + if (!pin->has_touch) { + mp_raise_ValueError(translate("Invalid pin")); + } + claim_pin(pin); + + touch_pad_init(); + touch_pad_config(touch_pad[pin->number]); + + touch_pad_set_fsm_mode(TOUCH_FSM_MODE_TIMER); + touch_pad_fsm_start(); + + // Initial values for pins will vary, depending on what peripherals the pins + // share on-chip. + + // Set a "touched" threshold not too far above the initial value. + // For simple finger touch, the values may vary as much as a factor of two, + // but for touches using fruit or other objects, the difference is much less. + + self->pin = pin->number; + self->threshold = get_raw_reading(self) + 100; +} + +bool common_hal_touchio_touchin_deinited(touchio_touchin_obj_t* self) { + return self->pin == 0xff; +} + +void common_hal_touchio_touchin_deinit(touchio_touchin_obj_t* self) { + if (common_hal_touchio_touchin_deinited(self)) { + return; + } + + //touch_pad_deinit(); + + reset_pin_number(self->pin); + self->pin = 0xff; +} + +bool common_hal_touchio_touchin_get_value(touchio_touchin_obj_t *self) { + uint16_t reading = get_raw_reading(self); + return reading > self->threshold; +} + +uint16_t common_hal_touchio_touchin_get_raw_value(touchio_touchin_obj_t *self) { + return get_raw_reading(self); +} + +uint16_t common_hal_touchio_touchin_get_threshold(touchio_touchin_obj_t *self) { + return self->threshold; +} + +void common_hal_touchio_touchin_set_threshold(touchio_touchin_obj_t *self, uint16_t new_threshold) { + self->threshold = new_threshold; +} diff --git a/ports/esp32s2/common-hal/touchio/TouchIn.h b/ports/esp32s2/common-hal/touchio/TouchIn.h new file mode 100644 index 000000000..81d80c9dd --- /dev/null +++ b/ports/esp32s2/common-hal/touchio/TouchIn.h @@ -0,0 +1,42 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2016 Scott Shawcroft + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_TOUCHIO_TOUCHIN_H +#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_TOUCHIO_TOUCHIN_H + +#include "common-hal/microcontroller/Pin.h" + +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; + uint8_t pin; + uint16_t threshold; +} touchio_touchin_obj_t; + +void touchin_reset(void); + +#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_TOUCHIO_TOUCHIN_H diff --git a/ports/esp32s2/common-hal/touchio/__init__.c b/ports/esp32s2/common-hal/touchio/__init__.c new file mode 100644 index 000000000..d2290447c --- /dev/null +++ b/ports/esp32s2/common-hal/touchio/__init__.c @@ -0,0 +1 @@ +// No touchio module functions. diff --git a/ports/esp32s2/mpconfigport.mk b/ports/esp32s2/mpconfigport.mk index 4e8a7bdef..60a3a14ca 100644 --- a/ports/esp32s2/mpconfigport.mk +++ b/ports/esp32s2/mpconfigport.mk @@ -26,4 +26,8 @@ CIRCUITPY_USB_MIDI = 0 CIRCUITPY_WIFI = 1 CIRCUITPY_ESPIDF = 1 +ifndef CIRCUITPY_TOUCHIO_USE_NATIVE +CIRCUITPY_TOUCHIO_USE_NATIVE = 1 +endif + CIRCUITPY_MODULE ?= none diff --git a/ports/esp32s2/peripherals/pins.c b/ports/esp32s2/peripherals/pins.c index 2c8b61c62..e372c84b1 100755 --- a/ports/esp32s2/peripherals/pins.c +++ b/ports/esp32s2/peripherals/pins.c @@ -29,55 +29,62 @@ #define NO_ADC 0 #define NO_ADC_CHANNEL ADC_CHANNEL_MAX +#define TOUCH \ + .has_touch = true, + +#define NO_TOUCH \ + .has_touch = false, + // This macro is used to simplify pin definition in boards//pins.c -#define PIN(p_name, p_number, p_adc_index, p_adc_channel) \ +#define PIN(p_name, p_number, p_adc_index, p_adc_channel, p_touch_channel) \ const mcu_pin_obj_t pin_## p_name = { \ PIN_PREFIX_VALUES \ .number = p_number, \ .adc_index = p_adc_index, \ .adc_channel = p_adc_channel, \ + p_touch_channel \ } -PIN(GPIO0, 0, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO1, 1, ADC_UNIT_1, ADC_CHANNEL_0); -PIN(GPIO2, 2, ADC_UNIT_1, ADC_CHANNEL_1); -PIN(GPIO3, 3, ADC_UNIT_1, ADC_CHANNEL_2); -PIN(GPIO4, 4, ADC_UNIT_1, ADC_CHANNEL_3); -PIN(GPIO5, 5, ADC_UNIT_1, ADC_CHANNEL_4); -PIN(GPIO6, 6, ADC_UNIT_1, ADC_CHANNEL_5); -PIN(GPIO7, 7, ADC_UNIT_1, ADC_CHANNEL_6); -PIN(GPIO8, 8, ADC_UNIT_1, ADC_CHANNEL_7); -PIN(GPIO9, 9, ADC_UNIT_1, ADC_CHANNEL_8); -PIN(GPIO10, 10, ADC_UNIT_1, ADC_CHANNEL_9); -PIN(GPIO11, 11, ADC_UNIT_2, ADC_CHANNEL_0); -PIN(GPIO12, 12, ADC_UNIT_2, ADC_CHANNEL_1); -PIN(GPIO13, 13, ADC_UNIT_2, ADC_CHANNEL_2); -PIN(GPIO14, 14, ADC_UNIT_2, ADC_CHANNEL_3); -PIN(GPIO15, 15, ADC_UNIT_2, ADC_CHANNEL_4); -PIN(GPIO16, 16, ADC_UNIT_2, ADC_CHANNEL_5); -PIN(GPIO17, 17, ADC_UNIT_2, ADC_CHANNEL_6); -PIN(GPIO18, 18, ADC_UNIT_2, ADC_CHANNEL_7); -PIN(GPIO19, 19, ADC_UNIT_2, ADC_CHANNEL_8); -PIN(GPIO20, 20, ADC_UNIT_2, ADC_CHANNEL_9); -PIN(GPIO21, 21, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO26, 26, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO27, 27, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO28, 28, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO29, 29, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO30, 30, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO31, 31, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO32, 32, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO33, 33, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO34, 34, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO35, 35, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO36, 36, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO37, 37, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO38, 38, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO39, 39, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO40, 40, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO41, 41, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO42, 42, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO43, 43, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO44, 44, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO45, 45, NO_ADC, NO_ADC_CHANNEL); -PIN(GPIO46, 46, NO_ADC, NO_ADC_CHANNEL); +PIN(GPIO0, 0, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO1, 1, ADC_UNIT_1, ADC_CHANNEL_0, TOUCH); +PIN(GPIO2, 2, ADC_UNIT_1, ADC_CHANNEL_1, TOUCH); +PIN(GPIO3, 3, ADC_UNIT_1, ADC_CHANNEL_2, TOUCH); +PIN(GPIO4, 4, ADC_UNIT_1, ADC_CHANNEL_3, TOUCH); +PIN(GPIO5, 5, ADC_UNIT_1, ADC_CHANNEL_4, TOUCH); +PIN(GPIO6, 6, ADC_UNIT_1, ADC_CHANNEL_5, TOUCH); +PIN(GPIO7, 7, ADC_UNIT_1, ADC_CHANNEL_6, TOUCH); +PIN(GPIO8, 8, ADC_UNIT_1, ADC_CHANNEL_7, TOUCH); +PIN(GPIO9, 9, ADC_UNIT_1, ADC_CHANNEL_8, TOUCH); +PIN(GPIO10, 10, ADC_UNIT_1, ADC_CHANNEL_9, TOUCH); +PIN(GPIO11, 11, ADC_UNIT_2, ADC_CHANNEL_0, TOUCH); +PIN(GPIO12, 12, ADC_UNIT_2, ADC_CHANNEL_1, TOUCH); +PIN(GPIO13, 13, ADC_UNIT_2, ADC_CHANNEL_2, TOUCH); +PIN(GPIO14, 14, ADC_UNIT_2, ADC_CHANNEL_3, TOUCH); +PIN(GPIO15, 15, ADC_UNIT_2, ADC_CHANNEL_4, NO_TOUCH); +PIN(GPIO16, 16, ADC_UNIT_2, ADC_CHANNEL_5, NO_TOUCH); +PIN(GPIO17, 17, ADC_UNIT_2, ADC_CHANNEL_6, NO_TOUCH); +PIN(GPIO18, 18, ADC_UNIT_2, ADC_CHANNEL_7, NO_TOUCH); +PIN(GPIO19, 19, ADC_UNIT_2, ADC_CHANNEL_8, NO_TOUCH); +PIN(GPIO20, 20, ADC_UNIT_2, ADC_CHANNEL_9, NO_TOUCH); +PIN(GPIO21, 21, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO26, 26, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO27, 27, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO28, 28, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO29, 29, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO30, 30, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO31, 31, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO32, 32, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO33, 33, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO34, 34, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO35, 35, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO36, 36, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO37, 37, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO38, 38, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO39, 39, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO40, 40, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO41, 41, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO42, 42, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO43, 43, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO44, 44, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO45, 45, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO46, 46, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); diff --git a/ports/esp32s2/peripherals/pins.h b/ports/esp32s2/peripherals/pins.h index 84123a80e..8be57f320 100644 --- a/ports/esp32s2/peripherals/pins.h +++ b/ports/esp32s2/peripherals/pins.h @@ -41,6 +41,7 @@ typedef struct { PIN_PREFIX_FIELDS gpio_num_t number; + bool has_touch:1; uint8_t adc_index:2; uint8_t adc_channel:6; } mcu_pin_obj_t; -- cgit v1.2.3 From b520498c733356afdc418bd5a9841c7496a3926e Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 1 Oct 2020 10:30:35 -0500 Subject: sharpdisplay: Re-use supervisor allocations if possible This is enabled by #3482 I was unable to determine why previously I had added sizeof(void*) to the GC heap allocation, so I removed that code as a mistake. --- shared-module/sharpdisplay/SharpMemoryFramebuffer.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/shared-module/sharpdisplay/SharpMemoryFramebuffer.c b/shared-module/sharpdisplay/SharpMemoryFramebuffer.c index c23446828..b199e98d6 100644 --- a/shared-module/sharpdisplay/SharpMemoryFramebuffer.c +++ b/shared-module/sharpdisplay/SharpMemoryFramebuffer.c @@ -34,21 +34,22 @@ #include "shared-module/sharpdisplay/SharpMemoryFramebuffer.h" #include "supervisor/memory.h" +#include "supervisor/shared/safe_mode.h" #define SHARPMEM_BIT_WRITECMD_LSB (0x80) #define SHARPMEM_BIT_VCOM_LSB (0x40) -static inline void *hybrid_alloc(size_t sz) { - if (gc_alloc_possible()) { - return m_malloc(sz + sizeof(void*), true); - } else { - supervisor_allocation *allocation = allocate_memory(align32_size(sz), false); - if (!allocation) { - return NULL; - } +static void *hybrid_alloc(size_t sz) { + supervisor_allocation *allocation = allocate_memory(align32_size(sz), false); + if (allocation) { memset(allocation->ptr, 0, sz); return allocation->ptr; } + if (gc_alloc_possible()) { + return m_malloc(sz, true); + } + reset_into_safe_mode(MEM_MANAGE); + return NULL; // unreached } static inline void hybrid_free(void *ptr_in) { @@ -155,7 +156,8 @@ void common_hal_sharpdisplay_framebuffer_construct(sharpdisplay_framebuffer_obj_ int row_stride = common_hal_sharpdisplay_framebuffer_get_row_stride(self); self->bufinfo.len = row_stride * height + 2; - self->bufinfo.buf = gc_alloc(self->bufinfo.len, false, true); + // re-use a supervisor allocation if possible + self->bufinfo.buf = hybrid_alloc(self->bufinfo.len); uint8_t *data = self->bufinfo.buf; *data++ = SHARPMEM_BIT_WRITECMD_LSB; -- cgit v1.2.3 From 04cf88deae155f99995e510270fd133ed2039f45 Mon Sep 17 00:00:00 2001 From: Antonin ENFRUN Date: Thu, 22 Oct 2020 07:50:31 +0000 Subject: Translated using Weblate (French) Currently translated at 100.0% (836 of 836 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/fr/ --- locale/fr.po | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/locale/fr.po b/locale/fr.po index 9bfc14428..cf0ea4fc3 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -8,14 +8,14 @@ msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-16 19:50-0500\n" -"PO-Revision-Date: 2020-10-17 15:35+0000\n" +"PO-Revision-Date: 2020-10-22 20:48+0000\n" "Last-Translator: Antonin ENFRUN \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.3.1-dev\n" +"X-Generator: Weblate 4.3.1\n" #: main.c msgid "" @@ -1439,7 +1439,7 @@ msgstr "" #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" -msgstr "" +msgstr "Une seule couleur peut être transparente à la fois" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" @@ -2185,7 +2185,7 @@ msgstr "tampon trop petit" #: shared-bindings/socketpool/Socket.c msgid "buffer too small for requested bytes" -msgstr "" +msgstr "tampon trop petit pour le nombre d'octets demandé" #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" -- cgit v1.2.3 From f4f6b082b46ae91ea9647bca5166bb0e6851b452 Mon Sep 17 00:00:00 2001 From: hexthat Date: Thu, 22 Oct 2020 02:52:04 +0000 Subject: Translated using Weblate (Chinese (Pinyin)) Currently translated at 100.0% (836 of 836 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/zh_Latn/ --- locale/zh_Latn_pinyin.po | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 6ad1c722d..13d0dfa79 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-16 19:50-0500\n" -"PO-Revision-Date: 2020-10-17 02:31+0000\n" +"PO-Revision-Date: 2020-10-22 20:48+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -15,7 +15,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Weblate 4.3.1-dev\n" +"X-Generator: Weblate 4.3.1\n" #: main.c msgid "" @@ -1423,7 +1423,7 @@ msgstr "" #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" -msgstr "" +msgstr "Yīcì zhǐ néng yǒuyī zhǒng yánsè shì tòumíng de" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" @@ -2153,7 +2153,7 @@ msgstr "huǎnchōng qū tài xiǎo" #: shared-bindings/socketpool/Socket.c msgid "buffer too small for requested bytes" -msgstr "" +msgstr "huǎn chōng qū tài xiǎo, duì yú qǐng qiú de zì jié" #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" -- cgit v1.2.3 From 73aae6bbcd10abac422199b2f484859f1a4c83fb Mon Sep 17 00:00:00 2001 From: Tino Martínez <43123591+tinomtzlpz@users.noreply.github.com> Date: Thu, 22 Oct 2020 16:09:17 -0500 Subject: Update es.po Fixed typos UARL -> UART --- locale/es.po | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/locale/es.po b/locale/es.po index 8cd5e6c22..7b6dac46e 100644 --- a/locale/es.po +++ b/locale/es.po @@ -1826,15 +1826,15 @@ msgstr "No se pudo encontrar el búfer para UART" #: ports/stm/common-hal/busio/UART.c msgid "UART De-init error" -msgstr "Error de desinicialización de UARL" +msgstr "Error de desinicialización de UART" #: ports/stm/common-hal/busio/UART.c msgid "UART Init Error" -msgstr "Error de inicialización de UARL" +msgstr "Error de inicialización de UART" #: ports/stm/common-hal/busio/UART.c msgid "UART Re-init error" -msgstr "Error de reinicialización de UARL" +msgstr "Error de reinicialización de UART" #: ports/stm/common-hal/busio/UART.c msgid "UART write error" -- cgit v1.2.3 From efd8f1ab888d1b72c4b25972e2e2d54ded3af455 Mon Sep 17 00:00:00 2001 From: Alvaro Figueroa Date: Thu, 22 Oct 2020 22:02:25 +0000 Subject: Translated using Weblate (Spanish) Currently translated at 100.0% (836 of 836 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/es/ --- locale/es.po | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/locale/es.po b/locale/es.po index 8cd5e6c22..b3a4333a8 100644 --- a/locale/es.po +++ b/locale/es.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-16 19:50-0500\n" -"PO-Revision-Date: 2020-10-17 02:31+0000\n" +"PO-Revision-Date: 2020-10-22 22:15+0000\n" "Last-Translator: Alvaro Figueroa \n" "Language-Team: \n" "Language: es\n" @@ -16,7 +16,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.3.1-dev\n" +"X-Generator: Weblate 4.3.1\n" #: main.c msgid "" @@ -1434,7 +1434,7 @@ msgstr "" #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" -msgstr "" +msgstr "Solo un color puede ser transparente a la vez" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" @@ -2175,7 +2175,7 @@ msgstr "buffer demasiado pequeño" #: shared-bindings/socketpool/Socket.c msgid "buffer too small for requested bytes" -msgstr "" +msgstr "búfer muy pequeño para los bytes solicitados" #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" -- cgit v1.2.3 From ef97ed6ab6938bc9c12987d7584cbc715a0f85bf Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Fri, 23 Oct 2020 13:17:49 +0530 Subject: Update touchio implementation --- ports/esp32s2/common-hal/touchio/TouchIn.c | 41 +++++-------- ports/esp32s2/common-hal/touchio/TouchIn.h | 2 +- ports/esp32s2/peripherals/pins.c | 94 ++++++++++++++---------------- ports/esp32s2/peripherals/pins.h | 3 +- 4 files changed, 62 insertions(+), 78 deletions(-) diff --git a/ports/esp32s2/common-hal/touchio/TouchIn.c b/ports/esp32s2/common-hal/touchio/TouchIn.c index 7d30d1a32..3e3e4b551 100644 --- a/ports/esp32s2/common-hal/touchio/TouchIn.c +++ b/ports/esp32s2/common-hal/touchio/TouchIn.c @@ -29,42 +29,31 @@ #include "driver/touch_pad.h" -static const touch_pad_t touch_pad[] = { - TOUCH_PAD_NUM1, - TOUCH_PAD_NUM2, - TOUCH_PAD_NUM3, - TOUCH_PAD_NUM4, - TOUCH_PAD_NUM5, - TOUCH_PAD_NUM6, - TOUCH_PAD_NUM7, - TOUCH_PAD_NUM8, - TOUCH_PAD_NUM9, - TOUCH_PAD_NUM10, - TOUCH_PAD_NUM11, - TOUCH_PAD_NUM12, - TOUCH_PAD_NUM13, - TOUCH_PAD_NUM14 -}; - static uint16_t get_raw_reading(touchio_touchin_obj_t *self) { uint32_t touch_value; - touch_pad_read_raw_data(touch_pad[self->pin], &touch_value); + touch_pad_read_raw_data((touch_pad_t)self->pin->touch_channel, &touch_value); + if (touch_value > UINT16_MAX) { + return UINT16_MAX; + } return touch_value; } void common_hal_touchio_touchin_construct(touchio_touchin_obj_t* self, const mcu_pin_obj_t *pin) { - if (!pin->has_touch) { + if (pin->touch_channel == TOUCH_PAD_MAX) { mp_raise_ValueError(translate("Invalid pin")); } claim_pin(pin); touch_pad_init(); - touch_pad_config(touch_pad[pin->number]); + touch_pad_config((touch_pad_t)pin->touch_channel); touch_pad_set_fsm_mode(TOUCH_FSM_MODE_TIMER); touch_pad_fsm_start(); + // wait for "raw data" to reset + mp_hal_delay_ms(10); + // Initial values for pins will vary, depending on what peripherals the pins // share on-chip. @@ -72,23 +61,21 @@ void common_hal_touchio_touchin_construct(touchio_touchin_obj_t* self, // For simple finger touch, the values may vary as much as a factor of two, // but for touches using fruit or other objects, the difference is much less. - self->pin = pin->number; + self->pin = pin; self->threshold = get_raw_reading(self) + 100; } bool common_hal_touchio_touchin_deinited(touchio_touchin_obj_t* self) { - return self->pin == 0xff; + return self->pin == NULL; } void common_hal_touchio_touchin_deinit(touchio_touchin_obj_t* self) { if (common_hal_touchio_touchin_deinited(self)) { return; } - - //touch_pad_deinit(); - - reset_pin_number(self->pin); - self->pin = 0xff; + touch_pad_deinit(); + reset_pin_number(self->pin->touch_channel); + self->pin = NULL; } bool common_hal_touchio_touchin_get_value(touchio_touchin_obj_t *self) { diff --git a/ports/esp32s2/common-hal/touchio/TouchIn.h b/ports/esp32s2/common-hal/touchio/TouchIn.h index 81d80c9dd..585bb37bf 100644 --- a/ports/esp32s2/common-hal/touchio/TouchIn.h +++ b/ports/esp32s2/common-hal/touchio/TouchIn.h @@ -33,7 +33,7 @@ typedef struct { mp_obj_base_t base; - uint8_t pin; + const mcu_pin_obj_t * pin; uint16_t threshold; } touchio_touchin_obj_t; diff --git a/ports/esp32s2/peripherals/pins.c b/ports/esp32s2/peripherals/pins.c index e372c84b1..0d3d89ad5 100755 --- a/ports/esp32s2/peripherals/pins.c +++ b/ports/esp32s2/peripherals/pins.c @@ -29,11 +29,7 @@ #define NO_ADC 0 #define NO_ADC_CHANNEL ADC_CHANNEL_MAX -#define TOUCH \ - .has_touch = true, - -#define NO_TOUCH \ - .has_touch = false, +#define NO_TOUCH_CHANNEL TOUCH_PAD_MAX // This macro is used to simplify pin definition in boards//pins.c #define PIN(p_name, p_number, p_adc_index, p_adc_channel, p_touch_channel) \ @@ -42,49 +38,49 @@ const mcu_pin_obj_t pin_## p_name = { \ .number = p_number, \ .adc_index = p_adc_index, \ .adc_channel = p_adc_channel, \ - p_touch_channel \ + .touch_channel = p_touch_channel, \ } -PIN(GPIO0, 0, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO1, 1, ADC_UNIT_1, ADC_CHANNEL_0, TOUCH); -PIN(GPIO2, 2, ADC_UNIT_1, ADC_CHANNEL_1, TOUCH); -PIN(GPIO3, 3, ADC_UNIT_1, ADC_CHANNEL_2, TOUCH); -PIN(GPIO4, 4, ADC_UNIT_1, ADC_CHANNEL_3, TOUCH); -PIN(GPIO5, 5, ADC_UNIT_1, ADC_CHANNEL_4, TOUCH); -PIN(GPIO6, 6, ADC_UNIT_1, ADC_CHANNEL_5, TOUCH); -PIN(GPIO7, 7, ADC_UNIT_1, ADC_CHANNEL_6, TOUCH); -PIN(GPIO8, 8, ADC_UNIT_1, ADC_CHANNEL_7, TOUCH); -PIN(GPIO9, 9, ADC_UNIT_1, ADC_CHANNEL_8, TOUCH); -PIN(GPIO10, 10, ADC_UNIT_1, ADC_CHANNEL_9, TOUCH); -PIN(GPIO11, 11, ADC_UNIT_2, ADC_CHANNEL_0, TOUCH); -PIN(GPIO12, 12, ADC_UNIT_2, ADC_CHANNEL_1, TOUCH); -PIN(GPIO13, 13, ADC_UNIT_2, ADC_CHANNEL_2, TOUCH); -PIN(GPIO14, 14, ADC_UNIT_2, ADC_CHANNEL_3, TOUCH); -PIN(GPIO15, 15, ADC_UNIT_2, ADC_CHANNEL_4, NO_TOUCH); -PIN(GPIO16, 16, ADC_UNIT_2, ADC_CHANNEL_5, NO_TOUCH); -PIN(GPIO17, 17, ADC_UNIT_2, ADC_CHANNEL_6, NO_TOUCH); -PIN(GPIO18, 18, ADC_UNIT_2, ADC_CHANNEL_7, NO_TOUCH); -PIN(GPIO19, 19, ADC_UNIT_2, ADC_CHANNEL_8, NO_TOUCH); -PIN(GPIO20, 20, ADC_UNIT_2, ADC_CHANNEL_9, NO_TOUCH); -PIN(GPIO21, 21, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO26, 26, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO27, 27, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO28, 28, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO29, 29, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO30, 30, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO31, 31, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO32, 32, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO33, 33, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO34, 34, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO35, 35, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO36, 36, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO37, 37, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO38, 38, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO39, 39, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO40, 40, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO41, 41, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO42, 42, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO43, 43, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO44, 44, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO45, 45, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); -PIN(GPIO46, 46, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH); +PIN(GPIO0, 0, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO1, 1, ADC_UNIT_1, ADC_CHANNEL_0, TOUCH_PAD_NUM1); +PIN(GPIO2, 2, ADC_UNIT_1, ADC_CHANNEL_1, TOUCH_PAD_NUM2); +PIN(GPIO3, 3, ADC_UNIT_1, ADC_CHANNEL_2, TOUCH_PAD_NUM3); +PIN(GPIO4, 4, ADC_UNIT_1, ADC_CHANNEL_3, TOUCH_PAD_NUM4); +PIN(GPIO5, 5, ADC_UNIT_1, ADC_CHANNEL_4, TOUCH_PAD_NUM5); +PIN(GPIO6, 6, ADC_UNIT_1, ADC_CHANNEL_5, TOUCH_PAD_NUM6); +PIN(GPIO7, 7, ADC_UNIT_1, ADC_CHANNEL_6, TOUCH_PAD_NUM7); +PIN(GPIO8, 8, ADC_UNIT_1, ADC_CHANNEL_7, TOUCH_PAD_NUM8); +PIN(GPIO9, 9, ADC_UNIT_1, ADC_CHANNEL_8, TOUCH_PAD_NUM9); +PIN(GPIO10, 10, ADC_UNIT_1, ADC_CHANNEL_9, TOUCH_PAD_NUM10); +PIN(GPIO11, 11, ADC_UNIT_2, ADC_CHANNEL_0, TOUCH_PAD_NUM11); +PIN(GPIO12, 12, ADC_UNIT_2, ADC_CHANNEL_1, TOUCH_PAD_NUM12); +PIN(GPIO13, 13, ADC_UNIT_2, ADC_CHANNEL_2, TOUCH_PAD_NUM13); +PIN(GPIO14, 14, ADC_UNIT_2, ADC_CHANNEL_3, TOUCH_PAD_NUM14); +PIN(GPIO15, 15, ADC_UNIT_2, ADC_CHANNEL_4, NO_TOUCH_CHANNEL); +PIN(GPIO16, 16, ADC_UNIT_2, ADC_CHANNEL_5, NO_TOUCH_CHANNEL); +PIN(GPIO17, 17, ADC_UNIT_2, ADC_CHANNEL_6, NO_TOUCH_CHANNEL); +PIN(GPIO18, 18, ADC_UNIT_2, ADC_CHANNEL_7, NO_TOUCH_CHANNEL); +PIN(GPIO19, 19, ADC_UNIT_2, ADC_CHANNEL_8, NO_TOUCH_CHANNEL); +PIN(GPIO20, 20, ADC_UNIT_2, ADC_CHANNEL_9, NO_TOUCH_CHANNEL); +PIN(GPIO21, 21, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO26, 26, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO27, 27, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO28, 28, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO29, 29, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO30, 30, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO31, 31, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO32, 32, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO33, 33, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO34, 34, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO35, 35, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO36, 36, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO37, 37, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO38, 38, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO39, 39, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO40, 40, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO41, 41, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO42, 42, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO43, 43, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO44, 44, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO45, 45, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); +PIN(GPIO46, 46, NO_ADC, NO_ADC_CHANNEL, NO_TOUCH_CHANNEL); diff --git a/ports/esp32s2/peripherals/pins.h b/ports/esp32s2/peripherals/pins.h index 8be57f320..c78eb8385 100644 --- a/ports/esp32s2/peripherals/pins.h +++ b/ports/esp32s2/peripherals/pins.h @@ -37,13 +37,14 @@ #include "components/hal/include/hal/gpio_types.h" #include "components/hal/include/hal/adc_types.h" +#include "components/hal/include/hal/touch_sensor_types.h" typedef struct { PIN_PREFIX_FIELDS gpio_num_t number; - bool has_touch:1; uint8_t adc_index:2; uint8_t adc_channel:6; + uint8_t touch_channel; } mcu_pin_obj_t; extern const mcu_pin_obj_t pin_GPIO0; -- cgit v1.2.3 From 2ebd06f8ee3d5818cd0c61468a7e12072b59c973 Mon Sep 17 00:00:00 2001 From: 0-Arngerdur-1 Date: Fri, 23 Oct 2020 15:14:45 -0500 Subject: Fix typos and fix translate --- locale/es.po | 42 ++++++++++++++++++++---------------------- 1 file changed, 20 insertions(+), 22 deletions(-) diff --git a/locale/es.po b/locale/es.po index b3a4333a8..e2ae41ee3 100644 --- a/locale/es.po +++ b/locale/es.po @@ -168,7 +168,7 @@ msgstr "'%s' espera un registro" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects a special register" -msgstr "'%s' espera un carácter" +msgstr "'%s' espera un registro especial" #: py/emitinlinethumb.c #, c-format @@ -239,7 +239,7 @@ msgstr "el objeto 'coroutine' no es un iterador" #: py/compile.c msgid "'data' requires at least 2 arguments" -msgstr "'data' requiere como minomo 2 argumentos" +msgstr "'data' requiere como mínimo 2 argumentos" #: py/compile.c msgid "'data' requires integer arguments" @@ -255,7 +255,7 @@ msgstr "'return' fuera de una función" #: py/compile.c msgid "'yield from' inside async function" -msgstr "'yield from' dentro función asincrónica" +msgstr "'yield from' dentro de una función asincrónica" #: py/compile.c msgid "'yield' outside function" @@ -289,7 +289,7 @@ msgstr "ADC2 está siendo usado por WiFi" #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" -msgstr "La dirección debe ser %d bytes de largo" +msgstr "La dirección debe tener %d bytes de largo" #: shared-bindings/_bleio/Address.c msgid "Address type out of range" @@ -318,9 +318,7 @@ msgstr "Todos los canales de eventos estan siendo usados" #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" -msgstr "" -"Todos los canales de eventos de sincronización (sync event channels) están " -"siendo utilizados" +msgstr "Todos los canales de eventos de sincronización (sync event channels) están siendo utilizados" #: shared-bindings/pwmio/PWMOut.c msgid "All timers for this pin are in use" @@ -347,7 +345,7 @@ msgstr "Ya se encuentra publicando." #: ports/atmel-samd/common-hal/canio/Listener.c msgid "Already have all-matches listener" -msgstr "Ya se tiene un escucha todas-las-coincidencias" +msgstr "Ya se tiene un escucha de todas las coincidencias" #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c @@ -370,7 +368,7 @@ msgstr "Funcionalidad AnalogOut no soportada" #: shared-bindings/analogio/AnalogOut.c msgid "AnalogOut is only 16 bits. Value must be less than 65536." -msgstr "AnalogOut es solo de 16 bits. Value debe ser menos a 65536." +msgstr "AnalogOut es solo de 16 bits. El valor debe ser menor que 65536." #: ports/atmel-samd/common-hal/analogio/AnalogOut.c msgid "AnalogOut not supported on given pin" @@ -383,7 +381,7 @@ msgstr "Otro envío ya está activo" #: shared-bindings/pulseio/PulseOut.c msgid "Array must contain halfwords (type 'H')" -msgstr "Array debe contener media palabra (type 'H')" +msgstr "El array debe contener medias palabras (escriba 'H')" #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." @@ -4013,7 +4011,7 @@ msgstr "zi debe ser una forma (n_section,2)" #~ msgstr "Falló el iniciar borrado de flash, err 0x%04x" #~ msgid "Flash write failed" -#~ msgstr "Falló la escritura" +#~ msgstr "Falló la escritura flash" #~ msgid "Flash write failed to start, err 0x%04x" #~ msgstr "Falló el iniciar la escritura de flash, err 0x%04x" @@ -4070,7 +4068,7 @@ msgstr "zi debe ser una forma (n_section,2)" #~ msgstr "Sin soporte PulseIn para %q" #~ msgid "No hardware support for analog out." -#~ msgstr "Sin soporte de hardware para analog out" +#~ msgstr "Sin soporte de hardware para salida analógica" #~ msgid "Not connected." #~ msgstr "No conectado." @@ -4079,24 +4077,24 @@ msgstr "zi debe ser una forma (n_section,2)" #~ msgstr "Solo formato Windows, BMP sin comprimir soportado %d" #~ msgid "Only bit maps of 8 bit color or less are supported" -#~ msgstr "Solo se admiten bit maps de color de 8 bits o menos" +#~ msgstr "Solo se admiten mapas de bits de color de 8 bits o menos" #~ msgid "" #~ "Only monochrome, indexed 8bpp, and 16bpp or greater BMPs supported: %d " #~ "bpp given" #~ msgstr "" #~ "Solo se admiten BMP monocromos, indexados de 8bpp y 16bpp o superiores:%d " -#~ "bppdado" +#~ "bpp dado" #, fuzzy #~ msgid "Only slices with step=1 (aka None) are supported" -#~ msgstr "solo se admiten segmentos con step=1 (alias None)" +#~ msgstr "Solo se admiten segmentos con step=1 (alias None)" #~ msgid "Only true color (24 bpp or higher) BMP supported %x" #~ msgstr "Solo color verdadero (24 bpp o superior) BMP admitido %x" #~ msgid "Only tx supported on UART1 (GPIO2)." -#~ msgstr "Solo tx soportada en UART1 (GPIO2)" +#~ msgstr "Solo tx soportada en UART1 (GPIO2)." #~ msgid "PWM not supported on pin %d" #~ msgstr "El pin %d no soporta PWM" @@ -4111,11 +4109,11 @@ msgstr "zi debe ser una forma (n_section,2)" #~ msgstr "Pines no válidos para SPI" #~ msgid "Pixel beyond bounds of buffer" -#~ msgstr "Pixel beyond bounds of buffer" +#~ msgstr "Píxel fuera de los límites del búfer" #, fuzzy #~ msgid "Range out of bounds" -#~ msgstr "address fuera de límites" +#~ msgstr "Rango fuera de límites" #~ msgid "STA must be active" #~ msgstr "STA debe estar activo" @@ -4135,10 +4133,10 @@ msgstr "zi debe ser una forma (n_section,2)" #~ msgstr "" #~ "El heap de CircuitPython estaba corrupto porque el stack era demasiado " #~ "pequeño.\n" -#~ "Aumente los límites del tamaño del stacj y presione reset (después de " +#~ "Aumente los límites del tamaño del stack y presione reset (después de " #~ "expulsarCIRCUITPY).\n" #~ "Si no cambió el stack, entonces reporte un issue aquí con el contenido " -#~ "desu unidad CIRCUITPY:\n" +#~ "de su unidad CIRCUITPY:\n" #~ msgid "" #~ "The microcontroller's power dipped. Please make sure your power supply " @@ -4191,7 +4189,7 @@ msgstr "zi debe ser una forma (n_section,2)" #~ "malo ha sucedido.\n" #~ msgid "bad GATT role" -#~ msgstr "mal GATT role" +#~ msgstr "rol de GATT malo" #~ msgid "bits must be 8" #~ msgstr "bits debe ser 8" @@ -4224,7 +4222,7 @@ msgstr "zi debe ser una forma (n_section,2)" #~ msgstr "no se puede establecer STA config" #~ msgid "characteristics includes an object that is not a Characteristic" -#~ msgstr "characteristics incluye un objeto que no es una Characteristica" +#~ msgstr "characteristics incluye un objeto que no es una Characteristic" #~ msgid "color buffer must be a buffer or int" #~ msgstr "color buffer deber ser un buffer o un int" -- cgit v1.2.3 From b4eb27557d98084024e9392dcb64bf9724c04517 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Sat, 24 Oct 2020 07:26:01 -0500 Subject: workflows: Upload stubs to s3 --- .github/workflows/build.yml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index fa576bbf0..0792d36a0 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -111,11 +111,13 @@ jobs: with: name: mpy-cross.static-x64-windows path: mpy-cross/mpy-cross.static.exe - - name: Upload mpy-cross builds to S3 + - name: Upload stubs and mpy-cross builds to S3 run: | [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static-raspbian s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-raspbian-${{ env.CP_VERSION }} --no-progress --region us-east-1 [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-amd64-linux-${{ env.CP_VERSION }} --no-progress --region us-east-1 [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static.exe s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-x64-windows-${{ env.CP_VERSION }}.exe --no-progress --region us-east-1 + zip -9 circuitpython-stubs.CP_VERSION }}.zip stubs + [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp circuitpython-stubs.zip s3://adafruit-circuit-python/bin/mpy-cross/circuitpython-stubs-${{ env.CP_VERSION }}.zip --no-progress --region us-east-1 env: AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} -- cgit v1.2.3 From c43011f149b981b4f9919a221f4ad4e9861b43a1 Mon Sep 17 00:00:00 2001 From: Senuros Date: Sun, 25 Oct 2020 22:08:10 +0100 Subject: Improving German translation --- locale/de_DE.po | 62 ++++++++++++++++++++++++++++----------------------------- 1 file changed, 31 insertions(+), 31 deletions(-) diff --git a/locale/de_DE.po b/locale/de_DE.po index e54b670a9..0e2e5a038 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -73,7 +73,7 @@ msgstr "Der Index %q befindet sich außerhalb des Bereiches" #: py/obj.c msgid "%q indices must be integers, not %q" -msgstr "" +msgstr "%q Indizes müssen Integer sein, nicht %q" #: shared-bindings/vectorio/Polygon.c msgid "%q list must be a list" @@ -81,7 +81,7 @@ msgstr "%q Liste muss eine Liste sein" #: shared-bindings/memorymonitor/AllocationAlarm.c msgid "%q must be >= 0" -msgstr "" +msgstr "%q muss >= 0 sein" #: shared-bindings/_bleio/CharacteristicBuffer.c #: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c @@ -97,11 +97,11 @@ msgstr "%q muss ein Tupel der Länge 2 sein" #: shared-bindings/canio/Match.c msgid "%q out of range" -msgstr "" +msgstr "%q außerhalb des Bereichs" #: ports/atmel-samd/common-hal/microcontroller/Pin.c msgid "%q pin invalid" -msgstr "" +msgstr "%q Pin ungültig" #: shared-bindings/fontio/BuiltinFont.c msgid "%q should be an int" @@ -117,11 +117,11 @@ msgstr "'%q' Argument erforderlich" #: py/runtime.c msgid "'%q' object cannot assign attribute '%q'" -msgstr "" +msgstr "'%q' Objekt kann das Attribut '%q' nicht zuweisen" #: py/proto.c msgid "'%q' object does not support '%q'" -msgstr "" +msgstr "'%q' Objekt unterstützt '%q' nicht" #: py/obj.c msgid "'%q' object does not support item assignment" @@ -129,11 +129,11 @@ msgstr "" #: py/obj.c msgid "'%q' object does not support item deletion" -msgstr "" +msgstr "'%q' objekt unterstützt das " #: py/runtime.c msgid "'%q' object has no attribute '%q'" -msgstr "" +msgstr "'%q' Objekt hat kein Attribut '%q'" #: py/runtime.c msgid "'%q' object is not an iterator" @@ -141,7 +141,7 @@ msgstr "" #: py/objtype.c py/runtime.c msgid "'%q' object is not callable" -msgstr "" +msgstr "'%q' Objekt ist kein callable" #: py/runtime.c msgid "'%q' object is not iterable" @@ -280,7 +280,7 @@ msgstr "Ein Hardware Interrupt Kanal wird schon benutzt" #: ports/esp32s2/common-hal/analogio/AnalogIn.c msgid "ADC2 is being used by WiFi" -msgstr "" +msgstr "ADC2 wird vom WiFi benutzt" #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format @@ -346,11 +346,11 @@ msgstr "" #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" -msgstr "" +msgstr "Läuft bereits" #: ports/esp32s2/common-hal/wifi/Radio.c msgid "Already scanning for wifi networks" -msgstr "" +msgstr "Sucht bereits nach wifi Netzwerken" #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" @@ -390,7 +390,7 @@ msgstr "Es darf höchstens %d %q spezifiziert werden (nicht %d)" #: shared-module/memorymonitor/AllocationAlarm.c #, c-format msgid "Attempt to allocate %d blocks" -msgstr "" +msgstr "Versuche %d Blöcke zu allokieren" #: supervisor/shared/safe_mode.c msgid "Attempted heap allocation when MicroPython VM not running." @@ -400,7 +400,7 @@ msgstr "" #: shared-bindings/wifi/Radio.c msgid "Authentication failure" -msgstr "" +msgstr "Authentifizierungsfehler" #: main.c msgid "Auto-reload is off.\n" @@ -478,11 +478,11 @@ msgstr "Die Pufferlänge %d ist zu groß. Sie muss kleiner als %d sein" #: ports/atmel-samd/common-hal/sdioio/SDCard.c #: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c msgid "Buffer length must be a multiple of 512" -msgstr "" +msgstr "Die Pufferlänge muss ein vielfaches von 512 sein" #: ports/stm/common-hal/sdioio/SDCard.c msgid "Buffer must be a multiple of 512 bytes" -msgstr "" +msgstr "Der Puffer muss ein vielfaches von 512 bytes sein" #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c msgid "Buffer must be at least length 1" @@ -660,7 +660,7 @@ msgstr "Beschädigter raw code" #: ports/cxd56/common-hal/camera/Camera.c msgid "Could not initialize Camera" -msgstr "" +msgstr "Konnte Kamera nicht initialisieren" #: ports/cxd56/common-hal/gnss/GNSS.c msgid "Could not initialize GNSS" @@ -668,7 +668,7 @@ msgstr "" #: ports/cxd56/common-hal/sdioio/SDCard.c msgid "Could not initialize SDCard" -msgstr "" +msgstr "Konnte SDKarte nicht initialisieren" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c @@ -701,7 +701,7 @@ msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" -msgstr "" +msgstr "Konnte Adresse nicht setzen" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not start PWM" @@ -818,7 +818,7 @@ msgstr "Characteristic wird erwartet" #: shared-bindings/_bleio/Adapter.c msgid "Expected a DigitalInOut" -msgstr "" +msgstr "DigitanInOut wird erwartet" #: shared-bindings/_bleio/Characteristic.c msgid "Expected a Service" @@ -826,7 +826,7 @@ msgstr "Ein Service wird erwartet" #: shared-bindings/_bleio/Adapter.c msgid "Expected a UART" -msgstr "" +msgstr "UART wird erwartet" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c #: shared-bindings/_bleio/Service.c @@ -853,7 +853,7 @@ msgstr "FFT ist nur für ndarrays definiert" #: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Failed SSL handshake" -msgstr "" +msgstr "SSL Handshake fehlgeschlagen" #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." @@ -918,16 +918,16 @@ msgstr "Datei existiert" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" -msgstr "" +msgstr "Filter zu komplex" #: ports/cxd56/common-hal/camera/Camera.c msgid "Format not supported" -msgstr "" +msgstr "Format nicht unterstützt" #: shared-module/framebufferio/FramebufferDisplay.c #, c-format msgid "Framebuffer requires %d bytes" -msgstr "" +msgstr "Framepuffer benötigt %d bytes" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "Frequency captured is above capability. Capture Paused." @@ -968,7 +968,7 @@ msgstr "Hardware in benutzung, probiere alternative Pins" #: shared-bindings/wifi/Radio.c msgid "Hostname must be between 1 and 253 characters" -msgstr "" +msgstr "Der Hostname muss zwischen 1 und 253 Zeichen haben" #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" @@ -980,7 +980,7 @@ msgstr "I2C-Init-Fehler" #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" -msgstr "" +msgstr "I2SOut nicht verfügbar" #: shared-bindings/aesio/aes.c #, c-format @@ -1026,12 +1026,12 @@ msgstr "Interner Fehler #%d" #: shared-bindings/sdioio/SDCard.c msgid "Invalid %q" -msgstr "" +msgstr "Ungültiger %q" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" -msgstr "Ungültiger %q pin" +msgstr "Ungültiger %q Pin" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c #: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c @@ -1049,7 +1049,7 @@ msgstr "Ungültige BMP-Datei" #: shared-bindings/wifi/Radio.c msgid "Invalid BSSID" -msgstr "" +msgstr "Ungültige BSSID" #: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c @@ -1100,7 +1100,7 @@ msgstr "Ungültige format chunk size" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "Invalid frequency" -msgstr "" +msgstr "Ungültige Frequenz" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" -- cgit v1.2.3 From 998661246cc84330a239e33a89e2ce6f8f3e9c38 Mon Sep 17 00:00:00 2001 From: Jonny Bergdahl Date: Sun, 25 Oct 2020 21:03:27 +0000 Subject: Translated using Weblate (Swedish) Currently translated at 100.0% (836 of 836 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/sv/ --- locale/sv.po | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/locale/sv.po b/locale/sv.po index 22007e11f..989b8257e 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-16 19:50-0500\n" -"PO-Revision-Date: 2020-10-22 01:12+0000\n" +"PO-Revision-Date: 2020-10-26 02:36+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" "Language: sv\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.3.1\n" +"X-Generator: Weblate 4.3.2-dev\n" #: main.c msgid "" @@ -494,7 +494,7 @@ msgstr "Bufferten är för stor och kan inte allokeras" #: shared-bindings/_bleio/PacketBuffer.c #, c-format msgid "Buffer too short by %d bytes" -msgstr "Buffert år %d bytes för kort" +msgstr "Buffert är %d bytes för kort" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c @@ -2161,7 +2161,7 @@ msgstr "buffert för liten" #: shared-bindings/socketpool/Socket.c msgid "buffer too small for requested bytes" -msgstr "buffertför liten för begärd längd" +msgstr "buffert för liten för begärd längd" #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" -- cgit v1.2.3 From 396d92f867c66673c8dffc77f7c0cbcaa83a157f Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Wed, 21 Oct 2020 10:38:01 -0500 Subject: esp32s2: Add canio This works in loopback mode, though the hardware filtering only permits a single address or mask filter. --- ports/esp32s2/Makefile | 4 +- .../boards/espressif_kaluga_1/mpconfigboard.mk | 2 +- ports/esp32s2/common-hal/canio/CAN.c | 297 +++++++++++++++++++++ ports/esp32s2/common-hal/canio/CAN.h | 52 ++++ ports/esp32s2/common-hal/canio/Listener.c | 182 +++++++++++++ ports/esp32s2/common-hal/canio/Listener.h | 40 +++ ports/esp32s2/common-hal/canio/__init__.c | 25 ++ ports/esp32s2/common-hal/canio/__init__.h | 27 ++ ports/esp32s2/mpconfigport.mk | 1 + 9 files changed, 627 insertions(+), 3 deletions(-) create mode 100644 ports/esp32s2/common-hal/canio/CAN.c create mode 100644 ports/esp32s2/common-hal/canio/CAN.h create mode 100644 ports/esp32s2/common-hal/canio/Listener.c create mode 100644 ports/esp32s2/common-hal/canio/Listener.h create mode 100644 ports/esp32s2/common-hal/canio/__init__.c create mode 100644 ports/esp32s2/common-hal/canio/__init__.h diff --git a/ports/esp32s2/Makefile b/ports/esp32s2/Makefile index 8d891edd0..5d8ccad50 100644 --- a/ports/esp32s2/Makefile +++ b/ports/esp32s2/Makefile @@ -331,10 +331,10 @@ $(BUILD)/firmware.uf2: $(BUILD)/circuitpython-firmware.bin $(Q)$(PYTHON3) $(TOP)/tools/uf2/utils/uf2conv.py -f 0xbfdd4eee -b 0x0000 -c -o $@ $^ flash: $(BUILD)/firmware.bin - esptool.py --chip esp32s2 -p $(PORT) --no-stub -b 460800 --before=default_reset --after=hard_reset write_flash $(FLASH_FLAGS) 0x0000 $^ + esptool.py --chip esp32s2 -p $(PORT) -b 460800 --before=default_reset --after=hard_reset write_flash $(FLASH_FLAGS) 0x0000 $^ flash-circuitpython-only: $(BUILD)/circuitpython-firmware.bin - esptool.py --chip esp32s2 -p $(PORT) --no-stub -b 460800 --before=default_reset --after=hard_reset write_flash $(FLASH_FLAGS) 0x10000 $^ + esptool.py --chip esp32s2 -p $(PORT) -b 460800 --before=default_reset --after=hard_reset write_flash $(FLASH_FLAGS) 0x10000 $^ include $(TOP)/py/mkrules.mk diff --git a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk index ba85e46ef..2dce03881 100644 --- a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk +++ b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk @@ -11,7 +11,7 @@ LONGINT_IMPL = MPZ CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32 CIRCUITPY_ESP_FLASH_MODE=dio -CIRCUITPY_ESP_FLASH_FREQ=40m +CIRCUITPY_ESP_FLASH_FREQ=80m CIRCUITPY_ESP_FLASH_SIZE=4MB CIRCUITPY_MODULE=wrover diff --git a/ports/esp32s2/common-hal/canio/CAN.c b/ports/esp32s2/common-hal/canio/CAN.c new file mode 100644 index 000000000..f1741969d --- /dev/null +++ b/ports/esp32s2/common-hal/canio/CAN.c @@ -0,0 +1,297 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Jeff Epler for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include + +#include "py/runtime.h" +#include "py/mperrno.h" + +#include "common-hal/canio/CAN.h" +#include "shared-bindings/microcontroller/Pin.h" +#include "shared-bindings/util.h" +#include "supervisor/port.h" +#include "hal/twai_ll.h" + +#include "hal/twai_types.h" + +STATIC bool reserved_can; + +twai_timing_config_t get_t_config(int baudrate) { + switch(baudrate) { + case 1000000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_1MBITS(); + return t_config; + } + case 800000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_800KBITS(); + return t_config; + } + case 500000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_500KBITS(); + return t_config; + } + case 250000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_250KBITS(); + return t_config; + } + case 125000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_125KBITS(); + return t_config; + } + case 100000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_100KBITS(); + return t_config; + } + case 50000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_50KBITS(); + return t_config; + } + case 25000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_25KBITS(); + return t_config; + } + case 20000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_20KBITS(); + return t_config; + } + case 16000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_16KBITS(); + return t_config; + } + case 12500: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_12_5KBITS(); + return t_config; + } + case 10000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_10KBITS(); + return t_config; + } + case 5000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_5KBITS(); + return t_config; + } + case 1000: + { + twai_timing_config_t t_config = TWAI_TIMING_CONFIG_1KBITS(); + return t_config; + } + default: + mp_raise_ValueError(translate("Baudrate not supported by peripheral")); + } +} + +__attribute__((optimize("O0"))) +void common_hal_canio_can_construct(canio_can_obj_t *self, mcu_pin_obj_t *tx, mcu_pin_obj_t *rx, int baudrate, bool loopback, bool silent) +{ +#define DIV_ROUND(a, b) (((a) + (b)/2) / (b)) +#define DIV_ROUND_UP(a, b) (((a) + (b) - 1) / (b)) + if (reserved_can) { + mp_raise_ValueError(translate("All CAN peripherals are in use")); + } + + if (loopback && silent) { + mp_raise_ValueError(translate("loopback + silent mode not supported by peripheral")); + } + + self->t_config = get_t_config(baudrate);; + twai_general_config_t g_config = TWAI_GENERAL_CONFIG_DEFAULT(-1, -1, TWAI_MODE_NORMAL); + g_config.tx_io = tx->number; + g_config.rx_io = rx->number; + if (loopback) { + g_config.mode = TWAI_MODE_NO_ACK; + } + if (silent) { + g_config.mode = TWAI_MODE_LISTEN_ONLY; + } + self->g_config = g_config; + + { + twai_filter_config_t f_config = TWAI_FILTER_CONFIG_ACCEPT_ALL(); + self->f_config = f_config; + } + + esp_err_t result = twai_driver_install(&self->g_config, &self->t_config, &self->f_config); + if (result == ESP_ERR_NO_MEM) { + mp_raise_msg(&mp_type_MemoryError, translate("ESP-IDF memory allocation failed")); + } else if (result == ESP_ERR_INVALID_ARG) { + mp_raise_ValueError(translate("Invalid pins")); + } else if (result != ESP_OK) { + mp_raise_OSError_msg_varg(translate("twai_driver_install returned esp-idf error #%d"), (int)result); + } + + result = twai_start(); + if (result != ESP_OK) { + mp_raise_OSError_msg_varg(translate("twai_start returned esp-idf error #%d"), (int)result); + } + + self->silent = silent; + self->loopback = loopback; + self->baudrate = baudrate; + self->tx_pin = tx; + self->rx_pin = rx; + + claim_pin(tx); + claim_pin(rx); + + reserved_can = true; +} + +bool common_hal_canio_can_loopback_get(canio_can_obj_t *self) +{ + return self->loopback; +} + +int common_hal_canio_can_baudrate_get(canio_can_obj_t *self) +{ + return self->baudrate; +} + +int common_hal_canio_can_transmit_error_count_get(canio_can_obj_t *self) +{ + twai_status_info_t info; + twai_get_status_info(&info); + return info.tx_error_counter; +} + +int common_hal_canio_can_receive_error_count_get(canio_can_obj_t *self) +{ + twai_status_info_t info; + twai_get_status_info(&info); + return info.rx_error_counter; +} + +canio_bus_state_t common_hal_canio_can_state_get(canio_can_obj_t *self) { + twai_status_info_t info; + twai_get_status_info(&info); + if (info.state == TWAI_STATE_BUS_OFF || info.state == TWAI_STATE_RECOVERING) { + return BUS_STATE_OFF; + } + if (info.tx_error_counter > 127 || info.rx_error_counter > 127) { + return BUS_STATE_ERROR_PASSIVE; + } + if (info.tx_error_counter > 96 || info.rx_error_counter > 96) { + return BUS_STATE_ERROR_WARNING; + } + return BUS_STATE_ERROR_ACTIVE; +} + +static void can_restart(void) { + twai_status_info_t info; + twai_get_status_info(&info); + if (info.state != TWAI_STATE_BUS_OFF) { + return; + } + twai_initiate_recovery(); + // wait 100ms (hard coded for now) for bus to recover + uint64_t deadline = port_get_raw_ticks(NULL) + 100; + do { + twai_get_status_info(&info); + } while (port_get_raw_ticks(NULL) < deadline && (info.state == TWAI_STATE_BUS_OFF || info.state == TWAI_STATE_RECOVERING)); +} + +void canio_maybe_auto_restart(canio_can_obj_t *self) { + if (self->auto_restart) can_restart(); +} + +void common_hal_canio_can_restart(canio_can_obj_t *self) { + if (!common_hal_canio_can_auto_restart_get(self)) { + can_restart(); + } +} + +bool common_hal_canio_can_auto_restart_get(canio_can_obj_t *self) { + return self->auto_restart; +} + +void common_hal_canio_can_auto_restart_set(canio_can_obj_t *self, bool value) { + self->auto_restart = value; + canio_maybe_auto_restart(self); +} + +void common_hal_canio_can_send(canio_can_obj_t *self, mp_obj_t message_in) +{ + canio_maybe_auto_restart(self); + canio_message_obj_t *message = message_in; + bool rtr = message->base.type == &canio_remote_transmission_request_type; + twai_message_t message_out = { + .extd = message->extended, + .rtr = rtr, + .self = self->loopback, + .identifier = message->id, + .data_length_code = message->size, + }; + if (!rtr) { + memcpy(message_out.data, message->data, message->size); + } + // Allow transmission to occur in background + twai_transmit(&message_out, 0); +} + +bool common_hal_canio_can_silent_get(canio_can_obj_t *self) { + return self->silent; +} + +bool common_hal_canio_can_deinited(canio_can_obj_t *self) { + return !self->tx_pin; +} + +void common_hal_canio_can_check_for_deinit(canio_can_obj_t *self) { + if (common_hal_canio_can_deinited(self)) { + raise_deinited_error(); + } +} + +void common_hal_canio_can_deinit(canio_can_obj_t *self) +{ + if (self->tx_pin) { + (void)twai_stop(); + (void)twai_driver_uninstall(); + reset_pin_number(self->tx_pin->number); + reset_pin_number(self->rx_pin->number); + reserved_can = false; + } + self->tx_pin = NULL; + self->rx_pin = NULL; +} + +void common_hal_canio_reset(void) { + (void)twai_stop(); + (void)twai_driver_uninstall(); + reserved_can = false; +} diff --git a/ports/esp32s2/common-hal/canio/CAN.h b/ports/esp32s2/common-hal/canio/CAN.h new file mode 100644 index 000000000..e15d51590 --- /dev/null +++ b/ports/esp32s2/common-hal/canio/CAN.h @@ -0,0 +1,52 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Jeff Epler for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#pragma once + +#include "py/obj.h" +#include "shared-bindings/canio/__init__.h" +#include "shared-bindings/canio/CAN.h" +#include "common-hal/microcontroller/Pin.h" +#include "common-hal/canio/__init__.h" +#include "shared-module/canio/Message.h" + +#include "driver/twai.h" + +#define FILTER_BANK_COUNT (28) + +typedef struct canio_can_obj { + mp_obj_base_t base; + int baudrate; + const mcu_pin_obj_t *rx_pin; + const mcu_pin_obj_t *tx_pin; + bool loopback:1; + bool silent:1; + bool auto_restart:1; + bool fifo_in_use:1; + twai_filter_config_t f_config; + twai_general_config_t g_config; + twai_timing_config_t t_config; +} canio_can_obj_t; diff --git a/ports/esp32s2/common-hal/canio/Listener.c b/ports/esp32s2/common-hal/canio/Listener.c new file mode 100644 index 000000000..fddbfeb58 --- /dev/null +++ b/ports/esp32s2/common-hal/canio/Listener.c @@ -0,0 +1,182 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Jeff Epler for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include +#include + +#include "py/obj.h" +#include "py/runtime.h" + +#include "common-hal/canio/__init__.h" +#include "common-hal/canio/Listener.h" +#include "shared-bindings/canio/Listener.h" +#include "shared-bindings/util.h" +#include "supervisor/shared/tick.h" +#include "supervisor/shared/safe_mode.h" + +#include "hal/twai_ll.h" + +// IDE = "extended ID" flag of packet header. We always add this bit to the +// mask because a match is always for just one kind of address length +#define FILTER16_IDE (1<<3) +#define FILTER32_IDE (1<<2) + +// Work around a problem reported at +// https://github.com/espressif/esp-idf/issues/6020 where +// twai_ll_set_acc_filter does not work under -Os optimization +__attribute__((optimize("O0"))) +__attribute__((noinline)) +static void canio_set_acc_filter(twai_dev_t* hw, uint32_t code, uint32_t mask, bool single_filter) +{ + uint32_t code_swapped = __builtin_bswap32(code); + uint32_t mask_swapped = __builtin_bswap32(mask); + for (int i = 0; i < 4; i++) { + hw->acceptance_filter.acr[i].val = ((code_swapped >> (i * 8)) & 0xFF); + hw->acceptance_filter.amr[i].val = ((mask_swapped >> (i * 8)) & 0xFF); + } + hw->mode_reg.afm = single_filter; +} + +STATIC void install_standard_filter(canio_listener_obj_t *self, canio_match_obj_t *match) { + canio_set_acc_filter(&TWAI, match->id << 21, ~(match->mask << 21), true); + self->extended = false; + self->standard = true; +} + +STATIC void install_extended_filter(canio_listener_obj_t *self, canio_match_obj_t *match) { + canio_set_acc_filter(&TWAI, match->id << 3, ~(match->mask << 3), true); + self->extended = true; + self->standard = false; +} + +STATIC void install_all_match_filter(canio_listener_obj_t *self) { + canio_set_acc_filter(&TWAI, 0u, ~0u, true); + self->extended = true; + self->standard = true; +} + +__attribute__((noinline,optimize("O0"))) +void set_filters(canio_listener_obj_t *self, size_t nmatch, canio_match_obj_t **matches) { + twai_ll_enter_reset_mode(&TWAI); + + if (!nmatch) { + install_all_match_filter(self); + } else { + canio_match_obj_t *match = matches[0]; + if (match->extended) { + install_extended_filter(self, match); + } else { + install_standard_filter(self, match); + } + } + + twai_ll_exit_reset_mode(&TWAI); +} + + +void common_hal_canio_listener_construct(canio_listener_obj_t *self, canio_can_obj_t *can, size_t nmatch, canio_match_obj_t **matches, float timeout) { + if (can->fifo_in_use) { + mp_raise_ValueError(translate("All RX FIFOs in use")); + } + if (nmatch > 1) { + mp_raise_ValueError(translate("Filters too complex")); + } + + // Nothing can fail now so it's safe to assign self->can + can->fifo_in_use = 1; + self->can = can; + self->pending = false; + + set_filters(self, nmatch, matches); + self->extended = self->standard = true; + + common_hal_canio_listener_set_timeout(self, timeout); +} + +void common_hal_canio_listener_set_timeout(canio_listener_obj_t *self, float timeout) { + self->timeout_ms = (int)MICROPY_FLOAT_C_FUN(ceil)(timeout * 1000); +} + +float common_hal_canio_listener_get_timeout(canio_listener_obj_t *self) { + return self->timeout_ms / 1000.0f; +} + +void common_hal_canio_listener_check_for_deinit(canio_listener_obj_t *self) { + if (!self->can) { + raise_deinited_error(); + } + common_hal_canio_can_check_for_deinit(self->can); +} + +// The API has no peek method so we must receive a packet into a holding area +// and then we can say that we have 1 message pending +int common_hal_canio_listener_in_waiting(canio_listener_obj_t *self) { + while (!self->pending && twai_receive(&self->message_in, 0) == ESP_OK) { + if (self->message_in.extd && self->extended) { + self->pending = true; + } + if (!self->message_in.extd && self->standard) { + self->pending = true; + } + } + return self->pending; +} + +mp_obj_t common_hal_canio_listener_receive(canio_listener_obj_t *self) { + if (!common_hal_canio_listener_in_waiting(self)) { + uint64_t deadline = supervisor_ticks_ms64() + self->timeout_ms; + do { + if (supervisor_ticks_ms64() > deadline) { + return NULL; + } + } while (!common_hal_canio_listener_in_waiting(self)); + } + + bool rtr = self->message_in.rtr; + + int dlc = self->message_in.data_length_code; + canio_message_obj_t *message = m_new_obj(canio_message_obj_t); + message->base.type = rtr ? &canio_remote_transmission_request_type : &canio_message_type; + message->extended = self->message_in.extd; + message->id = self->message_in.identifier; + message->size = dlc; + + if (!rtr) { + MP_STATIC_ASSERT(sizeof(self->message_in.data) == sizeof(message->data)); + memcpy(message->data, self->message_in.data, sizeof(message->data)); + } + + self->pending = false; + + return message; +} + +void common_hal_canio_listener_deinit(canio_listener_obj_t *self) { + if (self->can) { + self->can->fifo_in_use = false; + } + self->can = NULL; +} diff --git a/ports/esp32s2/common-hal/canio/Listener.h b/ports/esp32s2/common-hal/canio/Listener.h new file mode 100644 index 000000000..d24900e43 --- /dev/null +++ b/ports/esp32s2/common-hal/canio/Listener.h @@ -0,0 +1,40 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Jeff Epler for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#pragma once + +#include "common-hal/canio/CAN.h" +#include "shared-module/canio/Match.h" + +typedef struct canio_listener_obj { + mp_obj_base_t base; + canio_can_obj_t *can; + bool extended:1; + bool standard:1; + bool pending:1; + twai_message_t message_in; + uint32_t timeout_ms; +} canio_listener_obj_t; diff --git a/ports/esp32s2/common-hal/canio/__init__.c b/ports/esp32s2/common-hal/canio/__init__.c new file mode 100644 index 000000000..7932bfc2d --- /dev/null +++ b/ports/esp32s2/common-hal/canio/__init__.c @@ -0,0 +1,25 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Jeff Epler for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ diff --git a/ports/esp32s2/common-hal/canio/__init__.h b/ports/esp32s2/common-hal/canio/__init__.h new file mode 100644 index 000000000..20b6638cd --- /dev/null +++ b/ports/esp32s2/common-hal/canio/__init__.h @@ -0,0 +1,27 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Jeff Epler for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#pragma once diff --git a/ports/esp32s2/mpconfigport.mk b/ports/esp32s2/mpconfigport.mk index 4e8a7bdef..c9863572a 100644 --- a/ports/esp32s2/mpconfigport.mk +++ b/ports/esp32s2/mpconfigport.mk @@ -16,6 +16,7 @@ LONGINT_IMPL = MPZ CIRCUITPY_FULL_BUILD = 1 CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_AUDIOIO = 0 +CIRCUITPY_CANIO = 1 CIRCUITPY_COUNTIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_I2CPERIPHERAL = 0 -- cgit v1.2.3 From bdc13437910320c0784902661b16b6171720f1ab Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Wed, 21 Oct 2020 11:30:33 -0500 Subject: make translate --- locale/circuitpython.pot | 32 +++++++++++++++++++++++++++++--- 1 file changed, 29 insertions(+), 3 deletions(-) diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 7ed2d1ba1..94a6a8514 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -288,11 +288,16 @@ msgstr "" msgid "Address type out of range" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -407,6 +412,10 @@ msgid "" "disable.\n" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -775,7 +784,7 @@ msgstr "" msgid "ECB only operates on 16 bytes at a time" msgstr "" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" @@ -901,6 +910,7 @@ msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -1119,7 +1129,7 @@ msgstr "" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2837,6 +2847,10 @@ msgstr "" msgid "long int not supported in this build" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "" @@ -3181,6 +3195,8 @@ msgstr "" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3432,6 +3448,16 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c -- cgit v1.2.3 From 32f2a8d54cf54bb3f9dcba33f4b617d4dcf8b596 Mon Sep 17 00:00:00 2001 From: Lucian Copeland Date: Mon, 26 Oct 2020 11:03:54 -0400 Subject: Fix readme link --- ports/esp32s2/README.md | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/README.md b/ports/esp32s2/README.md index 8a6dfbd2d..f3e678de8 100644 --- a/ports/esp32s2/README.md +++ b/ports/esp32s2/README.md @@ -30,18 +30,20 @@ Connect these pins using a [USB adapter](https://www.adafruit.com/product/4090) ## Building and flashing ## -Before building or flashing the ESP32-S2, you must [install the esp-idf](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/get-started/index.html). This must be re-done ever time the esp-idf is updated, but not every time you build. Run `cd ports/esp32s2` from `circuitpython/` to move to the esp32s2 port root, and run: +Before building or flashing the ESP32-S2, you must [install the esp-idf](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/get-started/index.html). This must be re-done ever time the esp-idf is updated, but not every time you build. Run `cd ports/esp32s2` from `circuitpython/` to move to the esp32s2 port root, and run: ``` ./esp-idf/install.sh ``` -Additionally, any time you open a new bash environment for building or flashing, you must add the esp-idf tools to your path: +After this initial installation, you must add the esp-idf tools to your path. You must also do this **any time you open a new bash environment for building or flashing**: ``` . esp-idf/export.sh ``` +When Circuitpython updates the ESP-IDF to a new release, you may need to run this installation process again. The exact commands used may also vary based on your bash environment. + Building boards such as the Saola is typically done through `make flash`. The default port is `tty.SLAB_USBtoUART`, which will only work on certain Mac setups. On most machines, both Mac and Linux, you will need to set the port yourself by running `ls /dev/tty.usb*` and selecting the one that only appears when your development board is plugged in. An example make command with the port setting is as follows: ``` -- cgit v1.2.3 From c9f7df3bab8c46cc51b12eefc95391a00ba8c7e1 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 26 Oct 2020 10:06:49 -0500 Subject: canio: Give implementation-specific limits for CAN.Listen --- shared-bindings/canio/CAN.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/shared-bindings/canio/CAN.c b/shared-bindings/canio/CAN.c index 6dae36943..4982a97b9 100644 --- a/shared-bindings/canio/CAN.c +++ b/shared-bindings/canio/CAN.c @@ -214,7 +214,24 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(canio_can_restart_obj, canio_can_restart); //| //| An empty filter list causes all messages to be accepted. //| -//| Timeout dictates how long receive() and next() will block.""" +//| Timeout dictates how long receive() and next() will block. +//| +//| Platform specific notes: +//| +//| SAM E5x supports two Listeners. Filter blocks are shared between the two +//| listeners. There are 4 standard filter blocks and 4 extended filter blocks. +//| Each block can either match 2 single addresses or a mask of addresses. +//| The number of filter blocks can be increased, up to a hardware maximum, by +//| rebuilding CircuitPython, but this decreases the CircuitPython free +//| memory even if canio is not used. +//| +//| STM32F405 supports two Listeners. Filter blocks are shared between the two listeners. +//| There are 14 filter blocks. Each block can match 2 standard addresses with +//| mask or 1 extended address with mask. +//| +//| ESP32S2 supports one Listener. There is a single filter block, which can either match a +//| standard address with mask or an extended address with mask. +//| """ //| ... //| STATIC mp_obj_t canio_can_listen(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { -- cgit v1.2.3 From 5deb045a8112100de3cb28fdb7b6c56444663503 Mon Sep 17 00:00:00 2001 From: Gaetan Date: Mon, 26 Oct 2020 23:32:57 +0100 Subject: Ready to PR * ../../.github/workflows/build.yml + boards/holyiot_nrf52840/board.c + boards/holyiot_nrf52840/mpconfigboard.h + boards/holyiot_nrf52840/mpconfigboard.mk + boards/holyiot_nrf52840/pins.c --- .github/workflows/build.yml | 1 + ports/nrf/boards/holyiot_nrf52840/board.c | 38 ++++++++++++++ ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h | 33 ++++++++++++ ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk | 8 +++ ports/nrf/boards/holyiot_nrf52840/pins.c | 59 ++++++++++++++++++++++ 5 files changed, 139 insertions(+) create mode 100644 ports/nrf/boards/holyiot_nrf52840/board.c create mode 100644 ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h create mode 100644 ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk create mode 100644 ports/nrf/boards/holyiot_nrf52840/pins.c diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index feb6a7f63..cada55aaa 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -214,6 +214,7 @@ jobs: - "hallowing_m0_express" - "hallowing_m4_express" - "hiibot_bluefi" + - "holyiot_nrf52840" - "ikigaisense_vita" - "imxrt1010_evk" - "imxrt1020_evk" diff --git a/ports/nrf/boards/holyiot_nrf52840/board.c b/ports/nrf/boards/holyiot_nrf52840/board.c new file mode 100644 index 000000000..4421970ee --- /dev/null +++ b/ports/nrf/boards/holyiot_nrf52840/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h b/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h new file mode 100644 index 000000000..3b64d3a62 --- /dev/null +++ b/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h @@ -0,0 +1,33 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2016 Glenn Ruben Bakke + * + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "nrfx/hal/nrf_gpio.h" + +#define MICROPY_HW_BOARD_NAME "Holyiot nRF52840" +#define MICROPY_HW_MCU_NAME "nRF52840" + +#define MICROPY_HW_LED_STATUS (&pin_P0_19) diff --git a/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk b/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk new file mode 100644 index 000000000..d85de7507 --- /dev/null +++ b/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk @@ -0,0 +1,8 @@ +USB_VID = 0x239A +USB_PID = 0x80A0 +USB_PRODUCT = "HOLYIOTNRF52840" +USB_MANUFACTURER = "Holyiot" + +MCU_CHIP = nrf52840 + +INTERNAL_FLASH_FILESYSTEM = 1 \ No newline at end of file diff --git a/ports/nrf/boards/holyiot_nrf52840/pins.c b/ports/nrf/boards/holyiot_nrf52840/pins.c new file mode 100644 index 000000000..4e2593e58 --- /dev/null +++ b/ports/nrf/boards/holyiot_nrf52840/pins.c @@ -0,0 +1,59 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_module_globals_table[] = { + + { MP_ROM_QSTR(MP_QSTR_P1_10), MP_ROM_PTR(&pin_P0_02) }, + { MP_ROM_QSTR(MP_QSTR_P1_11), MP_ROM_PTR(&pin_P1_11) }, + { MP_ROM_QSTR(MP_QSTR_P1_13), MP_ROM_PTR(&pin_P1_13) }, + { MP_ROM_QSTR(MP_QSTR_P1_15), MP_ROM_PTR(&pin_P1_15) }, + { MP_ROM_QSTR(MP_QSTR_P0_03), MP_ROM_PTR(&pin_P0_03) }, + { MP_ROM_QSTR(MP_QSTR_P0_02), MP_ROM_PTR(&pin_P0_02) }, + { MP_ROM_QSTR(MP_QSTR_P0_28), MP_ROM_PTR(&pin_P0_28) }, + { MP_ROM_QSTR(MP_QSTR_P0_29), MP_ROM_PTR(&pin_P0_29) }, + { MP_ROM_QSTR(MP_QSTR_P0_30), MP_ROM_PTR(&pin_P0_30) }, + { MP_ROM_QSTR(MP_QSTR_P0_31), MP_ROM_PTR(&pin_P0_31) }, + { MP_ROM_QSTR(MP_QSTR_P0_04), MP_ROM_PTR(&pin_P0_04) }, + { MP_ROM_QSTR(MP_QSTR_P0_05), MP_ROM_PTR(&pin_P0_05) }, + { MP_ROM_QSTR(MP_QSTR_P1_14), MP_ROM_PTR(&pin_P1_14) }, + { MP_ROM_QSTR(MP_QSTR_P1_12), MP_ROM_PTR(&pin_P1_12) }, + { MP_ROM_QSTR(MP_QSTR_P0_25), MP_ROM_PTR(&pin_P0_25) }, + { MP_ROM_QSTR(MP_QSTR_P0_11), MP_ROM_PTR(&pin_P0_11) }, + { MP_ROM_QSTR(MP_QSTR_P1_08), MP_ROM_PTR(&pin_P1_08) }, + { MP_ROM_QSTR(MP_QSTR_P0_27), MP_ROM_PTR(&pin_P0_28) }, + { MP_ROM_QSTR(MP_QSTR_P0_08), MP_ROM_PTR(&pin_P0_08) }, + { MP_ROM_QSTR(MP_QSTR_P0_06), MP_ROM_PTR(&pin_P0_06) }, + { MP_ROM_QSTR(MP_QSTR_P0_26), MP_ROM_PTR(&pin_P0_26) }, + + { MP_ROM_QSTR(MP_QSTR_P0_10), MP_ROM_PTR(&pin_P0_10) }, + { MP_ROM_QSTR(MP_QSTR_P0_09), MP_ROM_PTR(&pin_P0_09) }, + { MP_ROM_QSTR(MP_QSTR_P1_06), MP_ROM_PTR(&pin_P1_06) }, + { MP_ROM_QSTR(MP_QSTR_P1_04), MP_ROM_PTR(&pin_P1_04) }, + { MP_ROM_QSTR(MP_QSTR_P1_02), MP_ROM_PTR(&pin_P1_02) }, + { MP_ROM_QSTR(MP_QSTR_P1_01), MP_ROM_PTR(&pin_P1_01) }, + { MP_ROM_QSTR(MP_QSTR_P1_03), MP_ROM_PTR(&pin_P1_03) }, + { MP_ROM_QSTR(MP_QSTR_P1_00), MP_ROM_PTR(&pin_P1_00) }, + { MP_ROM_QSTR(MP_QSTR_P0_22), MP_ROM_PTR(&pin_P0_22) }, + { MP_ROM_QSTR(MP_QSTR_P1_07), MP_ROM_PTR(&pin_P1_07) }, + { MP_ROM_QSTR(MP_QSTR_P1_05), MP_ROM_PTR(&pin_P1_05) }, + { MP_ROM_QSTR(MP_QSTR_P0_24), MP_ROM_PTR(&pin_P0_24) }, + { MP_ROM_QSTR(MP_QSTR_P0_20), MP_ROM_PTR(&pin_P0_20) }, + { MP_ROM_QSTR(MP_QSTR_P0_17), MP_ROM_PTR(&pin_P0_17) }, + { MP_ROM_QSTR(MP_QSTR_P0_15), MP_ROM_PTR(&pin_P0_15) }, + { MP_ROM_QSTR(MP_QSTR_P0_14), MP_ROM_PTR(&pin_P0_14) }, + { MP_ROM_QSTR(MP_QSTR_P0_13), MP_ROM_PTR(&pin_P0_13) }, + { MP_ROM_QSTR(MP_QSTR_P0_16), MP_ROM_PTR(&pin_P0_16) }, + + + { MP_ROM_QSTR(MP_QSTR_P0_07), MP_ROM_PTR(&pin_P0_07) }, + { MP_ROM_QSTR(MP_QSTR_P1_09), MP_ROM_PTR(&pin_P1_09) }, + { MP_ROM_QSTR(MP_QSTR_P0_12), MP_ROM_PTR(&pin_P0_12) }, + { MP_ROM_QSTR(MP_QSTR_P0_23), MP_ROM_PTR(&pin_P0_23) }, + { MP_ROM_QSTR(MP_QSTR_P0_21), MP_ROM_PTR(&pin_P0_21) }, + { MP_ROM_QSTR(MP_QSTR_P0_19), MP_ROM_PTR(&pin_P0_19) }, + + // RESET { MP_ROM_QSTR(MP_QSTR_P0_18), MP_ROM_PTR(&pin_P0_18) }, + +}; + + +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); \ No newline at end of file -- cgit v1.2.3 From cfaa02ef19c2370cfa8dc5d7fc27664f34d9c90c Mon Sep 17 00:00:00 2001 From: Gaetan Date: Mon, 26 Oct 2020 23:36:54 +0100 Subject: Fix error --- CONTRIBUTING.md | 2 -- 1 file changed, 2 deletions(-) diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md index c94e8db8c..15b4cfc89 100644 --- a/CONTRIBUTING.md +++ b/CONTRIBUTING.md @@ -4,8 +4,6 @@ SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://g SPDX-License-Identifier: MIT --> - - # Contributing Please note that this project is released with a [Contributor Code of Conduct](CODE_OF_CONDUCT.md). -- cgit v1.2.3 From fc591c8d847ad543ee2e8a368574783e2c230309 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Mon, 19 Oct 2020 18:30:26 -0700 Subject: Add EInk Portal --- .../boards/adafruit_esp32s2_eink_portal/board.c | 47 ++++++++++++++++++++++ .../adafruit_esp32s2_eink_portal/mpconfigboard.h | 45 +++++++++++++++++++++ .../adafruit_esp32s2_eink_portal/mpconfigboard.mk | 17 ++++++++ .../boards/adafruit_esp32s2_eink_portal/pins.c | 39 ++++++++++++++++++ .../boards/adafruit_esp32s2_eink_portal/sdkconfig | 33 +++++++++++++++ 5 files changed, 181 insertions(+) create mode 100644 ports/esp32s2/boards/adafruit_esp32s2_eink_portal/board.c create mode 100644 ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.h create mode 100644 ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.mk create mode 100644 ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c create mode 100644 ports/esp32s2/boards/adafruit_esp32s2_eink_portal/sdkconfig diff --git a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/board.c b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/board.c new file mode 100644 index 000000000..9f708874b --- /dev/null +++ b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/board.c @@ -0,0 +1,47 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" +#include "shared-bindings/microcontroller/Pin.h" + +void board_init(void) { + // USB + common_hal_never_reset_pin(&pin_GPIO19); + common_hal_never_reset_pin(&pin_GPIO20); + + // Debug UART + common_hal_never_reset_pin(&pin_GPIO43); + common_hal_never_reset_pin(&pin_GPIO44); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.h b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.h new file mode 100644 index 000000000..5a17a0cad --- /dev/null +++ b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.h @@ -0,0 +1,45 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +//Micropython setup + +#define MICROPY_HW_BOARD_NAME "EInk Portal" +#define MICROPY_HW_MCU_NAME "ESP32S2" + +#define MICROPY_HW_NEOPIXEL (&pin_GPIO1) + +#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) + +#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n") + +#define AUTORESET_DELAY_MS 500 + +#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34) +#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) + +#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) +#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) diff --git a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.mk b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.mk new file mode 100644 index 000000000..31aff57da --- /dev/null +++ b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.mk @@ -0,0 +1,17 @@ +USB_VID = 0x239A +USB_PID = 0x80E6 +USB_PRODUCT = "EInk Portal" +USB_MANUFACTURER = "Adafruit" + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = MPZ + +# The default queue depth of 16 overflows on release builds, +# so increase it to 32. +CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32 + +CIRCUITPY_ESP_FLASH_MODE=dio +CIRCUITPY_ESP_FLASH_FREQ=40m +CIRCUITPY_ESP_FLASH_SIZE=4MB + +CIRCUITPY_MODULE=wrover diff --git a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c new file mode 100644 index 000000000..2cf3d2402 --- /dev/null +++ b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c @@ -0,0 +1,39 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_AD1), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) }, + + { MP_ROM_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_GPIO17) }, + { MP_ROM_QSTR(MP_QSTR_SPEAKER_ENABLE), MP_ROM_PTR(&pin_GPIO16) }, + + { MP_ROM_QSTR(MP_QSTR_EPD_BUSY), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_EPD_RESET), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_EPD_DC), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_EPD_CS), MP_ROM_PTR(&pin_GPIO8) }, + + { MP_ROM_QSTR(MP_QSTR_BUTTON_A), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_B), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_C), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_D), MP_ROM_PTR(&pin_GPIO11) }, + + { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO2) }, + + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO34) }, + + { MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO37) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO21) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO1) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/sdkconfig b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/sdkconfig new file mode 100644 index 000000000..9d8bbde96 --- /dev/null +++ b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/sdkconfig @@ -0,0 +1,33 @@ +CONFIG_ESP32S2_SPIRAM_SUPPORT=y + +# +# SPI RAM config +# +# CONFIG_SPIRAM_TYPE_AUTO is not set +CONFIG_SPIRAM_TYPE_ESPPSRAM16=y +# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set +# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set +CONFIG_SPIRAM_SIZE=2097152 + +# +# PSRAM clock and cs IO for ESP32S2 +# +CONFIG_DEFAULT_PSRAM_CLK_IO=30 +CONFIG_DEFAULT_PSRAM_CS_IO=26 +# end of PSRAM clock and cs IO for ESP32S2 + +# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set +# CONFIG_SPIRAM_RODATA is not set +# CONFIG_SPIRAM_SPEED_80M is not set +CONFIG_SPIRAM_SPEED_40M=y +# CONFIG_SPIRAM_SPEED_26M is not set +# CONFIG_SPIRAM_SPEED_20M is not set +CONFIG_SPIRAM=y +CONFIG_SPIRAM_BOOT_INIT=y +# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set +CONFIG_SPIRAM_USE_MEMMAP=y +# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set +# CONFIG_SPIRAM_USE_MALLOC is not set +CONFIG_SPIRAM_MEMTEST=y +# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set +# end of SPI RAM config -- cgit v1.2.3 From 0d1649880f1c23ec6c9c0a4834f3712a8495f9d8 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Mon, 26 Oct 2020 16:58:00 -0700 Subject: Add grayscale EInk support --- shared-bindings/displayio/EPaperDisplay.c | 35 +++++++++++++++++++++++++------ shared-bindings/displayio/EPaperDisplay.h | 2 +- shared-module/displayio/ColorConverter.c | 9 ++++---- shared-module/displayio/EPaperDisplay.c | 15 ++++++++----- shared-module/displayio/EPaperDisplay.h | 1 + shared-module/displayio/Palette.h | 1 + shared-module/displayio/display_core.c | 1 + 7 files changed, 48 insertions(+), 16 deletions(-) diff --git a/shared-bindings/displayio/EPaperDisplay.c b/shared-bindings/displayio/EPaperDisplay.c index 8be4ee4c4..e0326d9c8 100644 --- a/shared-bindings/displayio/EPaperDisplay.c +++ b/shared-bindings/displayio/EPaperDisplay.c @@ -49,7 +49,19 @@ //| Most people should not use this class directly. Use a specific display driver instead that will //| contain the startup and shutdown sequences at minimum.""" //| -//| def __init__(self, display_bus: _DisplayBus, start_sequence: ReadableBuffer, stop_sequence: ReadableBuffer, *, width: int, height: int, ram_width: int, ram_height: int, colstart: int = 0, rowstart: int = 0, rotation: int = 0, set_column_window_command: Optional[int] = None, set_row_window_command: Optional[int] = None, single_byte_bounds: bool = False, write_black_ram_command: int, black_bits_inverted: bool = False, write_color_ram_command: Optional[int] = None, color_bits_inverted: bool = False, highlight_color: int = 0x000000, refresh_display_command: int, refresh_time: float = 40, busy_pin: Optional[microcontroller.Pin] = None, busy_state: bool = True, seconds_per_frame: float = 180, always_toggle_chip_select: bool = False) -> None: +//| def __init__(self, display_bus: _DisplayBus, +//| start_sequence: ReadableBuffer, stop_sequence: ReadableBuffer, *, +//| width: int, height: int, ram_width: int, ram_height: int, +//| colstart: int = 0, rowstart: int = 0, rotation: int = 0, +//| set_column_window_command: Optional[int] = None, +//| set_row_window_command: Optional[int] = None, single_byte_bounds: bool = False, +//| write_black_ram_command: int, black_bits_inverted: bool = False, +//| write_color_ram_command: Optional[int] = None, +//| color_bits_inverted: bool = False, highlight_color: int = 0x000000, +//| refresh_display_command: int, refresh_time: float = 40, +//| busy_pin: Optional[microcontroller.Pin] = None, busy_state: bool = True, +//| seconds_per_frame: float = 180, always_toggle_chip_select: bool = False, +//| grayscale: bool = False) -> None: //| """Create a EPaperDisplay object on the given display bus (`displayio.FourWire` or `displayio.ParallelBus`). //| //| The ``start_sequence`` and ``stop_sequence`` are bitpacked to minimize the ram impact. Every @@ -84,11 +96,18 @@ //| :param microcontroller.Pin busy_pin: Pin used to signify the display is busy //| :param bool busy_state: State of the busy pin when the display is busy //| :param float seconds_per_frame: Minimum number of seconds between screen refreshes -//| :param bool always_toggle_chip_select: When True, chip select is toggled every byte""" +//| :param bool always_toggle_chip_select: When True, chip select is toggled every byte +//| :param bool grayscale: When true, the color ram is the low bit of 2-bit grayscale""" //| ... //| STATIC mp_obj_t displayio_epaperdisplay_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { - enum { ARG_display_bus, ARG_start_sequence, ARG_stop_sequence, ARG_width, ARG_height, ARG_ram_width, ARG_ram_height, ARG_colstart, ARG_rowstart, ARG_rotation, ARG_set_column_window_command, ARG_set_row_window_command, ARG_set_current_column_command, ARG_set_current_row_command, ARG_write_black_ram_command, ARG_black_bits_inverted, ARG_write_color_ram_command, ARG_color_bits_inverted, ARG_highlight_color, ARG_refresh_display_command, ARG_refresh_time, ARG_busy_pin, ARG_busy_state, ARG_seconds_per_frame, ARG_always_toggle_chip_select }; + enum { ARG_display_bus, ARG_start_sequence, ARG_stop_sequence, ARG_width, ARG_height, + ARG_ram_width, ARG_ram_height, ARG_colstart, ARG_rowstart, ARG_rotation, + ARG_set_column_window_command, ARG_set_row_window_command, ARG_set_current_column_command, + ARG_set_current_row_command, ARG_write_black_ram_command, ARG_black_bits_inverted, + ARG_write_color_ram_command, ARG_color_bits_inverted, ARG_highlight_color, + ARG_refresh_display_command, ARG_refresh_time, ARG_busy_pin, ARG_busy_state, + ARG_seconds_per_frame, ARG_always_toggle_chip_select, ARG_grayscale }; static const mp_arg_t allowed_args[] = { { MP_QSTR_display_bus, MP_ARG_REQUIRED | MP_ARG_OBJ }, { MP_QSTR_start_sequence, MP_ARG_REQUIRED | MP_ARG_OBJ }, @@ -115,6 +134,7 @@ STATIC mp_obj_t displayio_epaperdisplay_make_new(const mp_obj_type_t *type, size { MP_QSTR_busy_state, MP_ARG_BOOL | MP_ARG_KW_ONLY, {.u_bool = true} }, { MP_QSTR_seconds_per_frame, MP_ARG_OBJ | MP_ARG_KW_ONLY, {.u_obj = MP_OBJ_NEW_SMALL_INT(180)} }, { MP_QSTR_always_toggle_chip_select, MP_ARG_BOOL | MP_ARG_KW_ONLY, {.u_bool = false} }, + { MP_QSTR_grayscale, MP_ARG_BOOL | MP_ARG_KW_ONLY, {.u_bool = false} }, }; mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); @@ -151,11 +171,14 @@ STATIC mp_obj_t displayio_epaperdisplay_make_new(const mp_obj_type_t *type, size self, display_bus, start_bufinfo.buf, start_bufinfo.len, stop_bufinfo.buf, stop_bufinfo.len, - args[ARG_width].u_int, args[ARG_height].u_int, args[ARG_ram_width].u_int, args[ARG_ram_height].u_int, args[ARG_colstart].u_int, args[ARG_rowstart].u_int, rotation, + args[ARG_width].u_int, args[ARG_height].u_int, args[ARG_ram_width].u_int, args[ARG_ram_height].u_int, + args[ARG_colstart].u_int, args[ARG_rowstart].u_int, rotation, args[ARG_set_column_window_command].u_int, args[ARG_set_row_window_command].u_int, args[ARG_set_current_column_command].u_int, args[ARG_set_current_row_command].u_int, - args[ARG_write_black_ram_command].u_int, args[ARG_black_bits_inverted].u_bool, write_color_ram_command, args[ARG_color_bits_inverted].u_bool, highlight_color, args[ARG_refresh_display_command].u_int, refresh_time, - busy_pin, args[ARG_busy_state].u_bool, seconds_per_frame, args[ARG_always_toggle_chip_select].u_bool + args[ARG_write_black_ram_command].u_int, args[ARG_black_bits_inverted].u_bool, write_color_ram_command, + args[ARG_color_bits_inverted].u_bool, highlight_color, args[ARG_refresh_display_command].u_int, refresh_time, + busy_pin, args[ARG_busy_state].u_bool, seconds_per_frame, + args[ARG_always_toggle_chip_select].u_bool, args[ARG_grayscale].u_bool ); return self; diff --git a/shared-bindings/displayio/EPaperDisplay.h b/shared-bindings/displayio/EPaperDisplay.h index e4b81c883..352de899a 100644 --- a/shared-bindings/displayio/EPaperDisplay.h +++ b/shared-bindings/displayio/EPaperDisplay.h @@ -44,7 +44,7 @@ void common_hal_displayio_epaperdisplay_construct(displayio_epaperdisplay_obj_t* uint16_t set_column_window_command, uint16_t set_row_window_command, uint16_t set_current_column_command, uint16_t set_current_row_command, uint16_t write_black_ram_command, bool black_bits_inverted, uint16_t write_color_ram_command, bool color_bits_inverted, uint32_t highlight_color, uint16_t refresh_display_command, mp_float_t refresh_time, - const mcu_pin_obj_t* busy_pin, bool busy_state, mp_float_t seconds_per_frame, bool always_toggle_chip_select); + const mcu_pin_obj_t* busy_pin, bool busy_state, mp_float_t seconds_per_frame, bool always_toggle_chip_select, bool grayscale); bool common_hal_displayio_epaperdisplay_refresh(displayio_epaperdisplay_obj_t* self); diff --git a/shared-module/displayio/ColorConverter.c b/shared-module/displayio/ColorConverter.c index dc64da03d..03ec99ceb 100644 --- a/shared-module/displayio/ColorConverter.c +++ b/shared-module/displayio/ColorConverter.c @@ -165,9 +165,9 @@ void displayio_colorconverter_convert(displayio_colorconverter_t *self, const _d g8 = MIN(255,g8 + (randg&0x03)); } else { int bitmask = 0xFF >> colorspace->depth; - b8 = MIN(255,b8 + (randb&bitmask)); - r8 = MIN(255,r8 + (randr&bitmask)); - g8 = MIN(255,g8 + (randg&bitmask)); + b8 = MIN(255,b8 + (randb & bitmask)); + r8 = MIN(255,r8 + (randr & bitmask)); + g8 = MIN(255,g8 + (randg & bitmask)); } pixel = r8 << 16 | g8 << 8 | b8; } @@ -196,7 +196,8 @@ void displayio_colorconverter_convert(displayio_colorconverter_t *self, const _d return; } else if (colorspace->grayscale && colorspace->depth <= 8) { uint8_t luma = displayio_colorconverter_compute_luma(pixel); - output_color->pixel = luma >> (8 - colorspace->depth); + size_t bitmask = (1 << colorspace->depth) - 1; + output_color->pixel = (luma >> colorspace->grayscale_bit) & bitmask; output_color->opaque = true; return; } diff --git a/shared-module/displayio/EPaperDisplay.c b/shared-module/displayio/EPaperDisplay.c index 46c7ea82e..514b99a13 100644 --- a/shared-module/displayio/EPaperDisplay.c +++ b/shared-module/displayio/EPaperDisplay.c @@ -49,7 +49,7 @@ void common_hal_displayio_epaperdisplay_construct(displayio_epaperdisplay_obj_t* uint16_t set_column_window_command, uint16_t set_row_window_command, uint16_t set_current_column_command, uint16_t set_current_row_command, uint16_t write_black_ram_command, bool black_bits_inverted, uint16_t write_color_ram_command, bool color_bits_inverted, uint32_t highlight_color, uint16_t refresh_display_command, mp_float_t refresh_time, - const mcu_pin_obj_t* busy_pin, bool busy_state, mp_float_t seconds_per_frame, bool chip_select) { + const mcu_pin_obj_t* busy_pin, bool busy_state, mp_float_t seconds_per_frame, bool chip_select, bool grayscale) { if (highlight_color != 0x000000) { self->core.colorspace.tricolor = true; self->core.colorspace.tricolor_hue = displayio_colorconverter_compute_hue(highlight_color); @@ -72,6 +72,7 @@ void common_hal_displayio_epaperdisplay_construct(displayio_epaperdisplay_obj_t* self->refreshing = false; self->milliseconds_per_frame = seconds_per_frame * 1000; self->chip_select = chip_select ? CHIP_SELECT_TOGGLE_EVERY_BYTE : CHIP_SELECT_UNTOUCHED; + self->grayscale = grayscale; self->start_sequence = start_sequence; self->start_sequence_len = start_sequence_len; @@ -230,17 +231,16 @@ bool displayio_epaperdisplay_refresh_area(displayio_epaperdisplay_obj_t* self, c uint32_t mask[mask_length]; uint8_t passes = 1; - if (self->core.colorspace.tricolor) { + if (self->core.colorspace.tricolor || self->grayscale) { passes = 2; } for (uint8_t pass = 0; pass < passes; pass++) { uint16_t remaining_rows = displayio_area_height(&clipped); - // added false parameter at end for SH1107_addressing quirk if (self->set_row_window_command != NO_COMMAND) { displayio_display_core_set_region_to_update(&self->core, self->set_column_window_command, self->set_row_window_command, self->set_current_column_command, self->set_current_row_command, - false, self->chip_select, &clipped, false); + false, self->chip_select, &clipped, false /* SH1107_addressing */); } uint8_t write_command = self->write_black_ram_command; @@ -270,8 +270,13 @@ bool displayio_epaperdisplay_refresh_area(displayio_epaperdisplay_obj_t* self, c memset(buffer, 0, buffer_size * sizeof(buffer[0])); self->core.colorspace.grayscale = true; + self->core.colorspace.grayscale_bit = 7; if (pass == 1) { - self->core.colorspace.grayscale = false; + if (self->grayscale) { // 4-color grayscale + self->core.colorspace.grayscale_bit = 6; + } else { // Tri-color + self->core.colorspace.grayscale = false; + } } displayio_display_core_fill_area(&self->core, &subrectangle, mask, buffer); diff --git a/shared-module/displayio/EPaperDisplay.h b/shared-module/displayio/EPaperDisplay.h index 3b9f6e368..4103fe5fc 100644 --- a/shared-module/displayio/EPaperDisplay.h +++ b/shared-module/displayio/EPaperDisplay.h @@ -55,6 +55,7 @@ typedef struct { bool black_bits_inverted; bool color_bits_inverted; bool refreshing; + bool grayscale; display_chip_select_behavior_t chip_select; } displayio_epaperdisplay_obj_t; diff --git a/shared-module/displayio/Palette.h b/shared-module/displayio/Palette.h index da72f250f..993912cc5 100644 --- a/shared-module/displayio/Palette.h +++ b/shared-module/displayio/Palette.h @@ -37,6 +37,7 @@ typedef struct { uint8_t bytes_per_cell; uint8_t tricolor_hue; uint8_t tricolor_luma; + uint8_t grayscale_bit; // The lowest grayscale bit. Normally 8 - depth. bool grayscale; bool tricolor; bool pixels_in_byte_share_row; diff --git a/shared-module/displayio/display_core.c b/shared-module/displayio/display_core.c index 411f9f373..57d33b565 100644 --- a/shared-module/displayio/display_core.c +++ b/shared-module/displayio/display_core.c @@ -48,6 +48,7 @@ void displayio_display_core_construct(displayio_display_core_t* self, uint16_t color_depth, bool grayscale, bool pixels_in_byte_share_row, uint8_t bytes_per_cell, bool reverse_pixels_in_byte, bool reverse_bytes_in_word) { self->colorspace.depth = color_depth; self->colorspace.grayscale = grayscale; + self->colorspace.grayscale_bit = 8 - color_depth; self->colorspace.pixels_in_byte_share_row = pixels_in_byte_share_row; self->colorspace.bytes_per_cell = bytes_per_cell; self->colorspace.reverse_pixels_in_byte = reverse_pixels_in_byte; -- cgit v1.2.3 From 95cb5961d26a4e1e048d48266d21547dc9229ba9 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Mon, 26 Oct 2020 16:58:56 -0700 Subject: Fix ESP32-S2 SPI when DMA is sometimes used --- ports/esp32s2/common-hal/busio/SPI.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/ports/esp32s2/common-hal/busio/SPI.c b/ports/esp32s2/common-hal/busio/SPI.c index 1906ca6f0..490419f34 100644 --- a/ports/esp32s2/common-hal/busio/SPI.c +++ b/ports/esp32s2/common-hal/busio/SPI.c @@ -357,6 +357,9 @@ bool common_hal_busio_spi_transfer(busio_spi_obj_t *self, const uint8_t *data_ou } else { hal->dma_enabled = 0; burst_length = sizeof(hal->hw->data_buf); + // When switching to non-DMA, we need to make sure DMA is off. Otherwise, + // the S2 will transmit zeroes instead of our data. + spi_ll_txdma_disable(hal->hw); } // This rounds up. -- cgit v1.2.3 From d86c6a74a48adc1e559845acd9821d4ad6f63590 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Mon, 26 Oct 2020 17:06:04 -0700 Subject: Add to CI build --- .github/workflows/build.yml | 1 + 1 file changed, 1 insertion(+) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index fa576bbf0..95bd2bfa4 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -418,6 +418,7 @@ jobs: fail-fast: false matrix: board: + - "adafruit_esp32s2_eink_portal" - "adafruit_metro_esp32s2" - "electroniccats_bastwifi" - "espressif_kaluga_1" -- cgit v1.2.3 From 2ba66599670c0d3d0f5ef5dc8780c34cf9d61231 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 26 Oct 2020 19:07:37 -0500 Subject: esp32s2: Makefile: restore --no-stub --- ports/esp32s2/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/Makefile b/ports/esp32s2/Makefile index 5d8ccad50..8d891edd0 100644 --- a/ports/esp32s2/Makefile +++ b/ports/esp32s2/Makefile @@ -331,10 +331,10 @@ $(BUILD)/firmware.uf2: $(BUILD)/circuitpython-firmware.bin $(Q)$(PYTHON3) $(TOP)/tools/uf2/utils/uf2conv.py -f 0xbfdd4eee -b 0x0000 -c -o $@ $^ flash: $(BUILD)/firmware.bin - esptool.py --chip esp32s2 -p $(PORT) -b 460800 --before=default_reset --after=hard_reset write_flash $(FLASH_FLAGS) 0x0000 $^ + esptool.py --chip esp32s2 -p $(PORT) --no-stub -b 460800 --before=default_reset --after=hard_reset write_flash $(FLASH_FLAGS) 0x0000 $^ flash-circuitpython-only: $(BUILD)/circuitpython-firmware.bin - esptool.py --chip esp32s2 -p $(PORT) -b 460800 --before=default_reset --after=hard_reset write_flash $(FLASH_FLAGS) 0x10000 $^ + esptool.py --chip esp32s2 -p $(PORT) --no-stub -b 460800 --before=default_reset --after=hard_reset write_flash $(FLASH_FLAGS) 0x10000 $^ include $(TOP)/py/mkrules.mk -- cgit v1.2.3 From 3a501a04951849ddd83455706fe87a6950d051fe Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 26 Oct 2020 19:18:37 -0500 Subject: esp32s2: canio: respond to review comments * explain the introduction of the temporary variable in get_t_config * get rid of unneeded __attribute__ * get rid of unneeded members of canio_can_obj_t * get rid of unneeded header inclusion --- ports/esp32s2/common-hal/canio/CAN.c | 14 ++++++-------- ports/esp32s2/common-hal/canio/CAN.h | 3 --- 2 files changed, 6 insertions(+), 11 deletions(-) diff --git a/ports/esp32s2/common-hal/canio/CAN.c b/ports/esp32s2/common-hal/canio/CAN.c index f1741969d..768fde243 100644 --- a/ports/esp32s2/common-hal/canio/CAN.c +++ b/ports/esp32s2/common-hal/canio/CAN.c @@ -33,7 +33,6 @@ #include "shared-bindings/microcontroller/Pin.h" #include "shared-bindings/util.h" #include "supervisor/port.h" -#include "hal/twai_ll.h" #include "hal/twai_types.h" @@ -43,6 +42,10 @@ twai_timing_config_t get_t_config(int baudrate) { switch(baudrate) { case 1000000: { + // TWAI_TIMING_CONFIG_abc expands to a C designated initializer list + // { .brp = 4, ...}. This is only acceptable to the compiler as an + // initializer and 'return TWAI_TIMING_CONFIG_1MBITS()` is not valid. + // Instead, introduce a temporary, named variable and return it. twai_timing_config_t t_config = TWAI_TIMING_CONFIG_1MBITS(); return t_config; } @@ -116,7 +119,6 @@ twai_timing_config_t get_t_config(int baudrate) { } } -__attribute__((optimize("O0"))) void common_hal_canio_can_construct(canio_can_obj_t *self, mcu_pin_obj_t *tx, mcu_pin_obj_t *rx, int baudrate, bool loopback, bool silent) { #define DIV_ROUND(a, b) (((a) + (b)/2) / (b)) @@ -129,7 +131,7 @@ void common_hal_canio_can_construct(canio_can_obj_t *self, mcu_pin_obj_t *tx, mc mp_raise_ValueError(translate("loopback + silent mode not supported by peripheral")); } - self->t_config = get_t_config(baudrate);; + twai_timing_config_t t_config = get_t_config(baudrate); twai_general_config_t g_config = TWAI_GENERAL_CONFIG_DEFAULT(-1, -1, TWAI_MODE_NORMAL); g_config.tx_io = tx->number; g_config.rx_io = rx->number; @@ -139,14 +141,10 @@ void common_hal_canio_can_construct(canio_can_obj_t *self, mcu_pin_obj_t *tx, mc if (silent) { g_config.mode = TWAI_MODE_LISTEN_ONLY; } - self->g_config = g_config; - { twai_filter_config_t f_config = TWAI_FILTER_CONFIG_ACCEPT_ALL(); - self->f_config = f_config; - } - esp_err_t result = twai_driver_install(&self->g_config, &self->t_config, &self->f_config); + esp_err_t result = twai_driver_install(&g_config, &t_config, &f_config); if (result == ESP_ERR_NO_MEM) { mp_raise_msg(&mp_type_MemoryError, translate("ESP-IDF memory allocation failed")); } else if (result == ESP_ERR_INVALID_ARG) { diff --git a/ports/esp32s2/common-hal/canio/CAN.h b/ports/esp32s2/common-hal/canio/CAN.h index e15d51590..85fb6972b 100644 --- a/ports/esp32s2/common-hal/canio/CAN.h +++ b/ports/esp32s2/common-hal/canio/CAN.h @@ -46,7 +46,4 @@ typedef struct canio_can_obj { bool silent:1; bool auto_restart:1; bool fifo_in_use:1; - twai_filter_config_t f_config; - twai_general_config_t g_config; - twai_timing_config_t t_config; } canio_can_obj_t; -- cgit v1.2.3 From ba0a3769e343b465c82dde4aafe99bcf11c84dbe Mon Sep 17 00:00:00 2001 From: _fonzlate Date: Mon, 26 Oct 2020 17:08:51 +0000 Subject: Translated using Weblate (Dutch) Currently translated at 100.0% (836 of 836 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/nl/ --- locale/nl.po | 122 ++++++++++++++++++++++++++++++----------------------------- 1 file changed, 63 insertions(+), 59 deletions(-) diff --git a/locale/nl.po b/locale/nl.po index ca7530c0f..59b1f2e73 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -6,15 +6,15 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-16 19:50-0500\n" -"PO-Revision-Date: 2020-09-09 16:05+0000\n" -"Last-Translator: Jelle Jager \n" +"PO-Revision-Date: 2020-10-27 16:47+0000\n" +"Last-Translator: _fonzlate \n" "Language-Team: none\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.3-dev\n" +"X-Generator: Weblate 4.3.2-dev\n" #: main.c msgid "" @@ -98,7 +98,7 @@ msgstr "%q moet een tuple van lengte 2 zijn" #: shared-bindings/canio/Match.c msgid "%q out of range" -msgstr "" +msgstr "%q buiten bereik" #: ports/atmel-samd/common-hal/microcontroller/Pin.c msgid "%q pin invalid" @@ -252,7 +252,7 @@ msgstr "'return' buiten de functie" #: py/compile.c msgid "'yield from' inside async function" -msgstr "" +msgstr "'yield from' binnen asynchrone functie" #: py/compile.c msgid "'yield' outside function" @@ -281,7 +281,7 @@ msgstr "Een hardware interrupt kanaal is al in gebruik" #: ports/esp32s2/common-hal/analogio/AnalogIn.c msgid "ADC2 is being used by WiFi" -msgstr "" +msgstr "ADC2 wordt gebruikt door WiFi" #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format @@ -299,7 +299,7 @@ msgstr "Alle I2C peripherals zijn in gebruik" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" -msgstr "" +msgstr "Alle RX FIFO's zijn in gebruik" #: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" @@ -342,7 +342,7 @@ msgstr "Advertising is al bezig." #: ports/atmel-samd/common-hal/canio/Listener.c msgid "Already have all-matches listener" -msgstr "" +msgstr "Heeft al een luisteraar voor 'all-matches'" #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c @@ -351,7 +351,7 @@ msgstr "Wordt al uitgevoerd" #: ports/esp32s2/common-hal/wifi/Radio.c msgid "Already scanning for wifi networks" -msgstr "" +msgstr "Zoekt al naar WiFi netwerken" #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" @@ -399,7 +399,7 @@ msgstr "heap allocatie geprobeerd terwijl MicroPython VM niet draait." #: shared-bindings/wifi/Radio.c msgid "Authentication failure" -msgstr "" +msgstr "Authenticatiefout" #: main.c msgid "Auto-reload is off.\n" @@ -617,7 +617,7 @@ msgstr "" #: supervisor/shared/safe_mode.c msgid "CircuitPython was unable to allocate the heap.\n" -msgstr "" +msgstr "CircuitPython kon het heap geheugen niet toewijzen.\n" #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." @@ -658,7 +658,7 @@ msgstr "Corrupt raw code" #: ports/cxd56/common-hal/camera/Camera.c msgid "Could not initialize Camera" -msgstr "" +msgstr "Kon camera niet initialiseren" #: ports/cxd56/common-hal/gnss/GNSS.c msgid "Could not initialize GNSS" @@ -695,7 +695,7 @@ msgstr "Kan PWM niet herstarten" #: ports/esp32s2/common-hal/neopixel_write/__init__.c msgid "Could not retrieve clock" -msgstr "" +msgstr "Kon klok niet ophalen" #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" @@ -789,7 +789,7 @@ msgstr "ECB werkt alleen met 16 bytes tegelijkertijd" #: ports/esp32s2/common-hal/busio/SPI.c msgid "ESP-IDF memory allocation failed" -msgstr "" +msgstr "ESP-IDF geheugen toewijzing mislukt" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c @@ -850,7 +850,7 @@ msgstr "FFT alleen voor ndarrays gedefineerd" #: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Failed SSL handshake" -msgstr "" +msgstr "SSL handdruk mislukt" #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." @@ -877,11 +877,11 @@ msgstr "Mislukt een RX buffer van %d bytes te alloceren" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Failed to allocate Wifi memory" -msgstr "" +msgstr "Kon WiFi geheugen niet toewijzen" #: ports/esp32s2/common-hal/wifi/ScannedNetworks.c msgid "Failed to allocate wifi scan memory" -msgstr "" +msgstr "Kon WiFi scan geheugen niet toewijzen" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" @@ -893,7 +893,7 @@ msgstr "Verbinding mislukt: timeout" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Failed to init wifi" -msgstr "" +msgstr "Kon WiFi niet initialiseren" #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" @@ -915,11 +915,11 @@ msgstr "Bestand bestaat" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" -msgstr "" +msgstr "Filters zijn te complex" #: ports/cxd56/common-hal/camera/Camera.c msgid "Format not supported" -msgstr "" +msgstr "Formaat wordt niet ondersteund" #: shared-module/framebufferio/FramebufferDisplay.c #, c-format @@ -963,7 +963,7 @@ msgstr "Hardware in gebruik, probeer alternatieve pinnen" #: shared-bindings/wifi/Radio.c msgid "Hostname must be between 1 and 253 characters" -msgstr "" +msgstr "Hostnaam moet tussen 1 en 253 karakters zijn" #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" @@ -996,7 +996,7 @@ msgstr "Incorrecte buffer grootte" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" -msgstr "" +msgstr "Invoer duurt te lang" #: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" @@ -1044,7 +1044,7 @@ msgstr "Ongeldig BMP bestand" #: shared-bindings/wifi/Radio.c msgid "Invalid BSSID" -msgstr "" +msgstr "Ongeldig BSSID" #: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c @@ -1095,7 +1095,7 @@ msgstr "Ongeldig formaat stuk grootte" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "Invalid frequency" -msgstr "" +msgstr "Onjuiste frequentie" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" @@ -1218,7 +1218,7 @@ msgstr "Maximale x waarde indien gespiegeld is %d" #: shared-bindings/canio/Message.c msgid "Messages limited to 8 bytes" -msgstr "" +msgstr "Berichten zijn beperkt tot 8 bytes" #: supervisor/shared/safe_mode.c msgid "MicroPython NLR jump failed. Likely memory corruption." @@ -1330,11 +1330,11 @@ msgstr "Geen lange integer ondersteuning" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more channels available" -msgstr "" +msgstr "Geen kanalen meer beschikbaar" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more timers available" -msgstr "" +msgstr "Geen timers meer beschikbaar" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." @@ -1342,7 +1342,7 @@ msgstr "Geen timers meer beschikbaar op deze pin." #: shared-bindings/wifi/Radio.c msgid "No network with that ssid" -msgstr "" +msgstr "Geen netwerk met dat SSID gevonden" #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" @@ -1366,7 +1366,7 @@ msgstr "Nordic Soft Device assertion mislukt." #: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c msgid "Not a valid IP string" -msgstr "" +msgstr "Geen geldige IP string" #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c @@ -1384,7 +1384,7 @@ msgstr "Opgeslagen code wordt niet uitgevoerd.\n" #: shared-bindings/_bleio/__init__.c msgid "Not settable" -msgstr "" +msgstr "Niet instelbaar" #: shared-bindings/util.c msgid "" @@ -1403,11 +1403,11 @@ msgstr "Alleen 8 of 16 bit mono met " #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Only IPv4 SOCK_STREAM sockets supported" -msgstr "" +msgstr "Alleen IPv4 SOCK_STREAM sockets worden ondersteund" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" -msgstr "" +msgstr "Alleen IPv4 adressen worden ondersteund" #: shared-module/displayio/OnDiskBitmap.c #, c-format @@ -1428,15 +1428,15 @@ msgstr "" #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" -msgstr "" +msgstr "Er kan maar één kleur per keer transparant zijn" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" -msgstr "" +msgstr "Alleen raw int ondersteund voor IP" #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" -msgstr "" +msgstr "Geen sockets meer beschikbaar" #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." @@ -1510,6 +1510,8 @@ msgid "" "Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " "instead" msgstr "" +"Poort ondersteund geen PWM drager. Geef een pin, frequentie en inschakeltijd " +"op" #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c @@ -1519,6 +1521,8 @@ msgid "" "Port does not accept pins or frequency. Construct and pass a PWMOut Carrier " "instead" msgstr "" +"Poort accepteert geen pin of frequentie. Stel een PWMOut Carrier samen en " +"geef die op" #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" @@ -1584,7 +1588,7 @@ msgstr "Verversing te snel" #: shared-bindings/canio/RemoteTransmissionRequest.c msgid "RemoteTransmissionRequests limited to 8 bytes" -msgstr "" +msgstr "RemoteTransmissionRequests is beperkt tot 8 bytes" #: shared-bindings/aesio/aes.c msgid "Requested AES mode is unsupported" @@ -1657,11 +1661,11 @@ msgstr "Serializer in gebruik" #: shared-bindings/ssl/SSLContext.c msgid "Server side context cannot have hostname" -msgstr "" +msgstr "Context aan de serverkant kan geen hostnaam hebben" #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" -msgstr "" +msgstr "Afmeting niet ondersteund" #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." @@ -1676,7 +1680,7 @@ msgstr "Slices niet ondersteund" #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "SocketPool can only be used with wifi.radio" -msgstr "" +msgstr "SocketPool kan alleen met wifi.radio gebruikt worden" #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" @@ -1724,7 +1728,7 @@ msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30" -msgstr "" +msgstr "De lengte van rgb_pins moet 6, 12, 18, 24 of 30 zijn" #: supervisor/shared/safe_mode.c msgid "" @@ -1783,7 +1787,7 @@ msgstr "" #: supervisor/shared/safe_mode.c msgid "To exit, please reset the board without " -msgstr "" +msgstr "Om te beëindigen, reset het bord zonder " #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." @@ -1856,7 +1860,7 @@ msgstr "Niet in staat buffers voor gesigneerde conversie te alloceren" #: ports/esp32s2/common-hal/busio/I2C.c msgid "Unable to create lock" -msgstr "" +msgstr "Kan vergrendeling niet maken" #: shared-module/displayio/I2CDisplay.c #, c-format @@ -1887,11 +1891,11 @@ msgstr "Onverwacht mrfx uuid type" #: ports/esp32s2/common-hal/socketpool/Socket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" -msgstr "" +msgstr "Niet behandelde ESP TLS fout %d %d %x %d" #: shared-bindings/wifi/Radio.c msgid "Unknown failure" -msgstr "" +msgstr "Onbekende fout" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format @@ -2009,7 +2013,7 @@ msgstr "" #: shared-bindings/wifi/Radio.c msgid "WiFi password must be between 8 and 63 characters" -msgstr "" +msgstr "WiFi wachtwoord moet tussen 8 en 63 karakters bevatten" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" @@ -2164,7 +2168,7 @@ msgstr "buffer te klein" #: shared-bindings/socketpool/Socket.c msgid "buffer too small for requested bytes" -msgstr "" +msgstr "buffer te klein voor gevraagde bytes" #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" @@ -2185,7 +2189,7 @@ msgstr "butes > 8 niet ondersteund" #: py/objarray.c msgid "bytes length not a multiple of item size" -msgstr "" +msgstr "bytes lengte is geen veelvoud van itemgrootte" #: py/objstr.c msgid "bytes value out of range" @@ -2503,11 +2507,11 @@ msgstr "uitzonderingen moeten afleiden van BaseException" #: shared-bindings/canio/CAN.c msgid "expected '%q' but got '%q'" -msgstr "" +msgstr "verwachtte '%q' maar ontving '%q'" #: shared-bindings/canio/CAN.c msgid "expected '%q' or '%q' but got '%q'" -msgstr "" +msgstr "verwachtte '%q' of '%q' maar ontving '%q'" #: py/objstr.c msgid "expected ':' after format specifier" @@ -2721,7 +2725,7 @@ msgstr "oorspronkelijke waarden moeten itereerbaar zijn" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c msgid "initial_value length is wrong" -msgstr "" +msgstr "lengte van initial_value is onjuist" #: py/compile.c msgid "inline assembler must be a function" @@ -2798,7 +2802,7 @@ msgstr "ongeldige formaatspecificatie" #: shared-bindings/wifi/Radio.c msgid "invalid hostname" -msgstr "" +msgstr "onjuiste hostnaam" #: extmod/modussl_axtls.c msgid "invalid key" @@ -3162,11 +3166,11 @@ msgstr "ord() verwacht een teken (char) maar vond een string van lengte %d" #: shared-bindings/displayio/Bitmap.c msgid "out of range of source" -msgstr "" +msgstr "buiten bereik van bron" #: shared-bindings/displayio/Bitmap.c msgid "out of range of target" -msgstr "" +msgstr "buiten bereik van doel" #: py/objint_mpz.c msgid "overflow converting long int to machine word" @@ -3175,7 +3179,7 @@ msgstr "overloop bij converteren van long int naar machine word" #: py/modstruct.c #, c-format msgid "pack expected %d items for packing (got %d)" -msgstr "" +msgstr "pack verwachtte %d elementen (ontving %d)" #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" @@ -3244,7 +3248,7 @@ msgstr "pow() met 3 argumenten vereist integers" #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" -msgstr "" +msgstr "druk bootknop in bij opstarten.\n" #: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h #: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h @@ -3252,7 +3256,7 @@ msgstr "" #: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h #: ports/atmel-samd/boards/meowmeow/mpconfigboard.h msgid "pressing both buttons at start up.\n" -msgstr "" +msgstr "druk beide knoppen in bij opstarten.\n" #: extmod/modutimeq.c msgid "queue overflow" @@ -3379,7 +3383,7 @@ msgstr "sosfilt vereist itereerbare argumenten" #: shared-bindings/displayio/Bitmap.c msgid "source palette too large" -msgstr "" +msgstr "bronpalet te groot" #: py/objstr.c msgid "start/end indices" @@ -3514,7 +3518,7 @@ msgstr "objecttype '%q' heeft geen attribuut '%q'" #: py/objgenerator.c msgid "type object 'generator' has no attribute '__await__'" -msgstr "" +msgstr "het type object 'generator' heeft geen attribuut '__await__'" #: py/objtype.c msgid "type takes 1 or 3 arguments" @@ -3624,7 +3628,7 @@ msgstr "watchdog time-out moet groter zijn dan 0" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "width must be greater than zero" -msgstr "" +msgstr "breedte moet groter dan nul zijn" #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" -- cgit v1.2.3 From f2e79ce89da0ed926a5b10c22e0cd3fc81197e6c Mon Sep 17 00:00:00 2001 From: Jelle Jager Date: Mon, 26 Oct 2020 16:37:46 +0000 Subject: Translated using Weblate (Dutch) Currently translated at 100.0% (836 of 836 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/nl/ --- locale/nl.po | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/locale/nl.po b/locale/nl.po index 59b1f2e73..f6efee019 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -7,7 +7,7 @@ msgstr "" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-16 19:50-0500\n" "PO-Revision-Date: 2020-10-27 16:47+0000\n" -"Last-Translator: _fonzlate \n" +"Last-Translator: Jelle Jager \n" "Language-Team: none\n" "Language: nl\n" "MIME-Version: 1.0\n" @@ -481,7 +481,7 @@ msgstr "Buffer lengte moet een veelvoud van 512 zijn" #: ports/stm/common-hal/sdioio/SDCard.c msgid "Buffer must be a multiple of 512 bytes" -msgstr "Buffer moet een veelvoud van 512 zijn" +msgstr "Buffer moet een veelvoud van 512 bytes zijn" #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c msgid "Buffer must be at least length 1" -- cgit v1.2.3 From e00ae204db06f6505f9965fb5433d8e3cb4e220c Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Tue, 27 Oct 2020 17:48:01 +0100 Subject: Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 12 ++++++++++++ locale/cs.po | 12 ++++++++++++ locale/de_DE.po | 12 ++++++++++++ locale/el.po | 12 ++++++++++++ locale/es.po | 20 +++++++++++++++++--- locale/fil.po | 12 ++++++++++++ locale/fr.po | 12 ++++++++++++ locale/hi.po | 12 ++++++++++++ locale/it_IT.po | 12 ++++++++++++ locale/ja.po | 12 ++++++++++++ locale/ko.po | 12 ++++++++++++ locale/nl.po | 12 ++++++++++++ locale/pl.po | 12 ++++++++++++ locale/pt_BR.po | 12 ++++++++++++ locale/sv.po | 12 ++++++++++++ locale/zh_Latn_pinyin.po | 12 ++++++++++++ 16 files changed, 197 insertions(+), 3 deletions(-) diff --git a/locale/ID.po b/locale/ID.po index 958ff1e6b..94a874826 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -2918,6 +2918,14 @@ msgstr "" msgid "maximum recursion depth exceeded" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3351,6 +3359,10 @@ msgstr "memulai ulang software(soft reboot)\n" msgid "sort argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index 6a3d00d99..b8da70741 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -2875,6 +2875,14 @@ msgstr "" msgid "maximum recursion depth exceeded" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3307,6 +3315,10 @@ msgstr "" msgid "sort argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 0e2e5a038..4d43a2655 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -2954,6 +2954,14 @@ msgstr "" msgid "maximum recursion depth exceeded" msgstr "maximale Rekursionstiefe überschritten" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3392,6 +3400,10 @@ msgstr "weicher reboot\n" msgid "sort argument must be an ndarray" msgstr "sortierungs Argument muss ein ndarray sein" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" diff --git a/locale/el.po b/locale/el.po index 5e55065b3..80fdb7eca 100644 --- a/locale/el.po +++ b/locale/el.po @@ -2870,6 +2870,14 @@ msgstr "" msgid "maximum recursion depth exceeded" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3302,6 +3310,10 @@ msgstr "" msgid "sort argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" diff --git a/locale/es.po b/locale/es.po index 5cf9cf865..38e0ff8d3 100644 --- a/locale/es.po +++ b/locale/es.po @@ -318,7 +318,9 @@ msgstr "Todos los canales de eventos estan siendo usados" #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" -msgstr "Todos los canales de eventos de sincronización (sync event channels) están siendo utilizados" +msgstr "" +"Todos los canales de eventos de sincronización (sync event channels) están " +"siendo utilizados" #: shared-bindings/pwmio/PWMOut.c msgid "All timers for this pin are in use" @@ -2941,6 +2943,14 @@ msgstr "max_lenght debe ser > 0" msgid "maximum recursion depth exceeded" msgstr "profundidad máxima de recursión excedida" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3378,6 +3388,10 @@ msgstr "reinicio suave\n" msgid "sort argument must be an ndarray" msgstr "argumento de ordenado debe ser un ndarray" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "el arreglo sos debe de forma (n_section, 6)" @@ -4135,8 +4149,8 @@ msgstr "zi debe ser una forma (n_section,2)" #~ "pequeño.\n" #~ "Aumente los límites del tamaño del stack y presione reset (después de " #~ "expulsarCIRCUITPY).\n" -#~ "Si no cambió el stack, entonces reporte un issue aquí con el contenido " -#~ "de su unidad CIRCUITPY:\n" +#~ "Si no cambió el stack, entonces reporte un issue aquí con el contenido de " +#~ "su unidad CIRCUITPY:\n" #~ msgid "" #~ "The microcontroller's power dipped. Please make sure your power supply " diff --git a/locale/fil.po b/locale/fil.po index 7a91f5c85..838bca98b 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -2919,6 +2919,14 @@ msgstr "" msgid "maximum recursion depth exceeded" msgstr "lumagpas ang maximum recursion depth" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3355,6 +3363,10 @@ msgstr "malambot na reboot\n" msgid "sort argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" diff --git a/locale/fr.po b/locale/fr.po index cf0ea4fc3..b4a15ee1f 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -2965,6 +2965,14 @@ msgstr "max_length doit être > 0" msgid "maximum recursion depth exceeded" msgstr "profondeur maximale de récursivité dépassée" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3404,6 +3412,10 @@ msgstr "redémarrage logiciel\n" msgid "sort argument must be an ndarray" msgstr "l'argument de «sort» doit être un ndarray" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "le tableau sos doit être de forme (n_section, 6)" diff --git a/locale/hi.po b/locale/hi.po index bd6d5395b..9174580a2 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -2870,6 +2870,14 @@ msgstr "" msgid "maximum recursion depth exceeded" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3302,6 +3310,10 @@ msgstr "" msgid "sort argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index 9ed3bb1e1..6345c095c 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -2921,6 +2921,14 @@ msgstr "" msgid "maximum recursion depth exceeded" msgstr "profondità massima di ricorsione superata" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3362,6 +3370,10 @@ msgstr "soft reboot\n" msgid "sort argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" diff --git a/locale/ja.po b/locale/ja.po index 8c3751c8e..abd2e1803 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -2900,6 +2900,14 @@ msgstr "max_lengthは0より大きくなければなりません" msgid "maximum recursion depth exceeded" msgstr "最大の再帰深度を超えました" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3335,6 +3343,10 @@ msgstr "ソフトリブート\n" msgid "sort argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" diff --git a/locale/ko.po b/locale/ko.po index 9c5750b9f..e5b728b84 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -2876,6 +2876,14 @@ msgstr "" msgid "maximum recursion depth exceeded" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3308,6 +3316,10 @@ msgstr "" msgid "sort argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index f6efee019..234bb930a 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -2934,6 +2934,14 @@ msgstr "max_length moet >0 zijn" msgid "maximum recursion depth exceeded" msgstr "maximale recursiediepte overschreden" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3369,6 +3377,10 @@ msgstr "zachte herstart\n" msgid "sort argument must be an ndarray" msgstr "sorteerargument moet een ndarray zijn" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "sos array moet vorm (n_section, 6) hebben" diff --git a/locale/pl.po b/locale/pl.po index f6292a0a3..cadb2c43e 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -2893,6 +2893,14 @@ msgstr "max_length musi być > 0" msgid "maximum recursion depth exceeded" msgstr "przekroczono dozwoloną głębokość rekurencji" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3327,6 +3335,10 @@ msgstr "programowy reset\n" msgid "sort argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index b80afeb1a..2c3d9b207 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -2954,6 +2954,14 @@ msgstr "max_length deve ser > 0" msgid "maximum recursion depth exceeded" msgstr "a recursão máxima da profundidade foi excedida" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3395,6 +3403,10 @@ msgstr "reinicialização soft\n" msgid "sort argument must be an ndarray" msgstr "o argumento da classificação deve ser um ndarray" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "o sos da matriz deve estar na forma (n_section, 6)" diff --git a/locale/sv.po b/locale/sv.po index 989b8257e..f2fa50189 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -2927,6 +2927,14 @@ msgstr "max_length måste vara > 0" msgid "maximum recursion depth exceeded" msgstr "maximal rekursionsdjup överskriden" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3362,6 +3370,10 @@ msgstr "mjuk omstart\n" msgid "sort argument must be an ndarray" msgstr "argumentet sort måste vara en ndarray" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "sos array måste ha form (n_section, 6)" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 13d0dfa79..5ed34cc6c 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -2917,6 +2917,14 @@ msgstr "Max_length bìxū > 0" msgid "maximum recursion depth exceeded" msgstr "chāochū zuìdà dìguī shēndù" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3351,6 +3359,10 @@ msgstr "ruǎn chóngqǐ\n" msgid "sort argument must be an ndarray" msgstr "páixù cānshù bìxū shì ndarray" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "sos shùzǔ de xíngzhuàng bìxū wèi (n_section, 6)" -- cgit v1.2.3 From 80029f6929ebbf6c0a02c5320e59220b0501bd55 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Wed, 28 Oct 2020 00:12:13 +0530 Subject: rotaryio implementation for esp32s2 --- .../common-hal/rotaryio/IncrementalEncoder.c | 115 +++++++++++++++++++++ .../common-hal/rotaryio/IncrementalEncoder.h | 41 ++++++++ ports/esp32s2/common-hal/rotaryio/__init__.c | 1 + ports/esp32s2/mpconfigport.mk | 2 +- 4 files changed, 158 insertions(+), 1 deletion(-) create mode 100644 ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c create mode 100644 ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.h create mode 100644 ports/esp32s2/common-hal/rotaryio/__init__.c diff --git a/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c b/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c new file mode 100644 index 000000000..bbff36374 --- /dev/null +++ b/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c @@ -0,0 +1,115 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "common-hal/rotaryio/IncrementalEncoder.h" + +#include "py/runtime.h" +#include "supervisor/shared/translate.h" + +#include "driver/pcnt.h" + +static void pcnt_reset(int unit) { + // Initialize PCNT's counter + pcnt_counter_pause(unit); + pcnt_counter_clear(unit); + + // Everything is set up, now go to counting + pcnt_counter_resume(unit); +} + +static void pcnt_init(int unit, rotaryio_incrementalencoder_obj_t* self) { + // Prepare configuration for the PCNT unit + pcnt_config_t pcnt_config = { + // Set PCNT input signal and control GPIOs + .pulse_gpio_num = self->pin_a->number, + .ctrl_gpio_num = self->pin_b->number, + .channel = PCNT_CHANNEL_0, + .unit = unit, + // What to do on the positive / negative edge of pulse input? + .pos_mode = PCNT_COUNT_DEC, // Count up on the positive edge + .neg_mode = PCNT_COUNT_INC, // Keep the counter value on the negative edge + // What to do when control input is low or high? + .lctrl_mode = PCNT_MODE_REVERSE, // Reverse counting direction if low + .hctrl_mode = PCNT_MODE_KEEP, // Keep the primary counter mode if high + }; + // Initialize PCNT unit + pcnt_unit_config(&pcnt_config); + + // Configure channel 1 + pcnt_config.pulse_gpio_num = self->pin_b->number; + pcnt_config.ctrl_gpio_num = self->pin_a->number; + pcnt_config.channel = PCNT_CHANNEL_1; + pcnt_config.pos_mode = PCNT_COUNT_INC; + pcnt_config.neg_mode = PCNT_COUNT_DEC; + pcnt_unit_config(&pcnt_config); + + // Configure and enable the input filter + pcnt_set_filter_value(unit, 100); + pcnt_filter_enable(unit); + + pcnt_reset(unit); +} + +void common_hal_rotaryio_incrementalencoder_construct(rotaryio_incrementalencoder_obj_t* self, + const mcu_pin_obj_t* pin_a, const mcu_pin_obj_t* pin_b) { + claim_pin(pin_a); + claim_pin(pin_b); + + self->pin_a = pin_a; + self->pin_b = pin_b; + + self->position = 0; + + pcnt_init(PCNT_UNIT_0, self); +} + +bool common_hal_rotaryio_incrementalencoder_deinited(rotaryio_incrementalencoder_obj_t* self) { + return self->pin_a == NULL; +} + +void common_hal_rotaryio_incrementalencoder_deinit(rotaryio_incrementalencoder_obj_t* self) { + if (common_hal_rotaryio_incrementalencoder_deinited(self)) { + return; + } + + reset_pin_number(self->pin_a->number); + self->pin_a = NULL; + + reset_pin_number(self->pin_b->number); + self->pin_b = NULL; +} + +mp_int_t common_hal_rotaryio_incrementalencoder_get_position(rotaryio_incrementalencoder_obj_t* self) { + int16_t count = 0; + pcnt_get_counter_value(PCNT_UNIT_0, &count); + return self->position+count; +} + +void common_hal_rotaryio_incrementalencoder_set_position(rotaryio_incrementalencoder_obj_t* self, + mp_int_t new_position) { + self->position = new_position; + pcnt_reset(PCNT_UNIT_0); +} diff --git a/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.h b/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.h new file mode 100644 index 000000000..0cc2830fb --- /dev/null +++ b/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.h @@ -0,0 +1,41 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ROTARYIO_INCREMENTALENCODER_H +#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ROTARYIO_INCREMENTALENCODER_H + +#include "common-hal/microcontroller/Pin.h" + +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; + const mcu_pin_obj_t * pin_a; + const mcu_pin_obj_t * pin_b; + mp_int_t position; +} rotaryio_incrementalencoder_obj_t; + +#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ROTARYIO_INCREMENTALENCODER_H diff --git a/ports/esp32s2/common-hal/rotaryio/__init__.c b/ports/esp32s2/common-hal/rotaryio/__init__.c new file mode 100644 index 000000000..0aae79c26 --- /dev/null +++ b/ports/esp32s2/common-hal/rotaryio/__init__.c @@ -0,0 +1 @@ +// No rotaryio module functions. diff --git a/ports/esp32s2/mpconfigport.mk b/ports/esp32s2/mpconfigport.mk index 4e8a7bdef..dadab3751 100644 --- a/ports/esp32s2/mpconfigport.mk +++ b/ports/esp32s2/mpconfigport.mk @@ -19,7 +19,7 @@ CIRCUITPY_AUDIOIO = 0 CIRCUITPY_COUNTIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_I2CPERIPHERAL = 0 -CIRCUITPY_ROTARYIO = 0 +CIRCUITPY_ROTARYIO = 1 CIRCUITPY_NVM = 0 # We don't have enough endpoints to include MIDI. CIRCUITPY_USB_MIDI = 0 -- cgit v1.2.3 From 54c0e98a37fc3c997d3a7a566a67e33d1636f46a Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Tue, 27 Oct 2020 13:58:23 -0700 Subject: Fix openbook build --- ports/atmel-samd/boards/openbook_m4/board.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/ports/atmel-samd/boards/openbook_m4/board.c b/ports/atmel-samd/boards/openbook_m4/board.c index f0010f6d7..07dd1741a 100644 --- a/ports/atmel-samd/boards/openbook_m4/board.c +++ b/ports/atmel-samd/boards/openbook_m4/board.c @@ -97,7 +97,8 @@ void board_init(void) { &pin_PA01, // busy_pin false, // busy_state 5, // seconds_per_frame - false); // chip_select (don't always toggle chip select) + false, // chip_select (don't always toggle chip select) + false); // grayscale } bool board_requests_safe_mode(void) { -- cgit v1.2.3 From 91e85e8037c058f5029f9ba61d6da952eeac436e Mon Sep 17 00:00:00 2001 From: Adolfo Jayme Barrientos Date: Tue, 27 Oct 2020 17:19:22 +0000 Subject: Translated using Weblate (Spanish) Currently translated at 99.6% (836 of 839 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/es/ --- locale/es.po | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/locale/es.po b/locale/es.po index 38e0ff8d3..6b8b96d2d 100644 --- a/locale/es.po +++ b/locale/es.po @@ -8,15 +8,15 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-16 19:50-0500\n" -"PO-Revision-Date: 2020-10-22 22:15+0000\n" -"Last-Translator: Alvaro Figueroa \n" +"PO-Revision-Date: 2020-10-27 21:01+0000\n" +"Last-Translator: Adolfo Jayme Barrientos \n" "Language-Team: \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.3.1\n" +"X-Generator: Weblate 4.3.2-dev\n" #: main.c msgid "" @@ -33,7 +33,7 @@ msgid "" "https://github.com/adafruit/circuitpython/issues\n" msgstr "" "\n" -"Reporte un problema con el contenido de su unidad CIRCUITPY en\n" +"Presente un problema con el contenido de su unidad CIRCUITPY en\n" "https://github.com/adafruit/circuitpython/issues\n" #: py/obj.c -- cgit v1.2.3 From 54c26a772ba071d129c0e30e8fc6d44e1be74029 Mon Sep 17 00:00:00 2001 From: Wellington Terumi Uemura Date: Tue, 27 Oct 2020 16:59:40 +0000 Subject: Translated using Weblate (Portuguese (Brazil)) Currently translated at 100.0% (839 of 839 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pt_BR/ --- locale/pt_BR.po | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 2c3d9b207..16631c32a 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-16 19:50-0500\n" -"PO-Revision-Date: 2020-10-21 19:58+0000\n" +"PO-Revision-Date: 2020-10-27 21:01+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.3.1\n" +"X-Generator: Weblate 4.3.2-dev\n" #: main.c msgid "" @@ -2956,11 +2956,11 @@ msgstr "a recursão máxima da profundidade foi excedida" #: extmod/ulab/code/approx/approx.c msgid "maxiter must be > 0" -msgstr "" +msgstr "maxiter deve ser > 0" #: extmod/ulab/code/approx/approx.c msgid "maxiter should be > 0" -msgstr "" +msgstr "maxiter pode ser > 0" #: py/runtime.c #, c-format @@ -3405,7 +3405,7 @@ msgstr "o argumento da classificação deve ser um ndarray" #: extmod/ulab/code/numerical/numerical.c msgid "sorted axis can't be longer than 65535" -msgstr "" +msgstr "o eixo ordenado não pode ser maior do que 65535" #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" -- cgit v1.2.3 From 32f6f64a288903395358b4be73a92fe03a71fc67 Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Tue, 27 Oct 2020 22:01:17 +0100 Subject: Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 32 +++++++++++++++++++++++++++++--- locale/cs.po | 32 +++++++++++++++++++++++++++++--- locale/de_DE.po | 32 +++++++++++++++++++++++++++++--- locale/el.po | 32 +++++++++++++++++++++++++++++--- locale/es.po | 32 +++++++++++++++++++++++++++++--- locale/fil.po | 32 +++++++++++++++++++++++++++++--- locale/fr.po | 32 +++++++++++++++++++++++++++++--- locale/hi.po | 32 +++++++++++++++++++++++++++++--- locale/it_IT.po | 32 +++++++++++++++++++++++++++++--- locale/ja.po | 32 +++++++++++++++++++++++++++++--- locale/ko.po | 32 +++++++++++++++++++++++++++++--- locale/nl.po | 32 +++++++++++++++++++++++++++++--- locale/pl.po | 32 +++++++++++++++++++++++++++++--- locale/pt_BR.po | 32 +++++++++++++++++++++++++++++--- locale/sv.po | 32 +++++++++++++++++++++++++++++--- locale/zh_Latn_pinyin.po | 32 +++++++++++++++++++++++++++++--- 16 files changed, 464 insertions(+), 48 deletions(-) diff --git a/locale/ID.po b/locale/ID.po index 94a874826..7debab27a 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-10-10 23:51+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" @@ -292,11 +292,16 @@ msgstr "Alamat harus sepanjang %d byte" msgid "Address type out of range" msgstr "Jenis alamat di luar batas" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Semua perangkat I2C sedang digunakan" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -413,6 +418,10 @@ msgstr "" "Auto-reload aktif. Silahkan simpan data-data (files) melalui USB untuk " "menjalankannya atau masuk ke REPL untukmenonaktifkan.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -793,7 +802,7 @@ msgstr "Mode kendara tidak digunakan saat arah input." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB hanya beroperasi pada 16 byte di satu waktu" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" @@ -919,6 +928,7 @@ msgid "File exists" msgstr "File sudah ada" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -1140,7 +1150,7 @@ msgstr "Pin untuk channel kanan tidak valid" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2884,6 +2894,10 @@ msgstr "" msgid "long int not supported in this build" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "" @@ -3237,6 +3251,8 @@ msgstr "" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3493,6 +3509,16 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/cs.po b/locale/cs.po index b8da70741..e4f677d8e 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-05-24 03:22+0000\n" "Last-Translator: dronecz \n" "Language-Team: LANGUAGE \n" @@ -292,11 +292,16 @@ msgstr "" msgid "Address type out of range" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -411,6 +416,10 @@ msgid "" "disable.\n" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -779,7 +788,7 @@ msgstr "" msgid "ECB only operates on 16 bytes at a time" msgstr "" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" @@ -905,6 +914,7 @@ msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -1123,7 +1133,7 @@ msgstr "" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2841,6 +2851,10 @@ msgstr "" msgid "long int not supported in this build" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "" @@ -3193,6 +3207,8 @@ msgstr "" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3448,6 +3464,16 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/de_DE.po b/locale/de_DE.po index 4d43a2655..141a5e8c0 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-06-16 18:24+0000\n" "Last-Translator: Andreas Buchen \n" "Language: de_DE\n" @@ -291,11 +291,16 @@ msgstr "Die Adresse muss %d Bytes lang sein" msgid "Address type out of range" msgstr "Adresstyp außerhalb des zulässigen Bereichs" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Alle I2C-Peripheriegeräte sind in Benutzung" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -414,6 +419,10 @@ msgstr "" "Automatisches Neuladen ist aktiv. Speichere Dateien über USB um sie " "auszuführen oder verbinde dich mit der REPL zum Deaktivieren.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -789,7 +798,7 @@ msgstr "Drive mode wird nicht verwendet, wenn die Richtung input ist." msgid "ECB only operates on 16 bytes at a time" msgstr "Die EZB arbeitet jeweils nur mit 16 Bytes" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" @@ -916,6 +925,7 @@ msgid "File exists" msgstr "Datei existiert" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "Filter zu komplex" @@ -1140,7 +1150,7 @@ msgstr "Ungültiger Pin für rechten Kanal" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2920,6 +2930,10 @@ msgstr "" msgid "long int not supported in this build" msgstr "long int wird in diesem Build nicht unterstützt" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "fehlformatierter f-string" @@ -3276,6 +3290,8 @@ msgstr "pow () mit 3 Argumenten erfordert Integer" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3534,6 +3550,16 @@ msgstr "Tupelindex außerhalb des Bereichs" msgid "tuple/list has wrong length" msgstr "tupel/list hat falsche Länge" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/el.po b/locale/el.po index 80fdb7eca..cc6da670c 100644 --- a/locale/el.po +++ b/locale/el.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -287,11 +287,16 @@ msgstr "" msgid "Address type out of range" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -406,6 +411,10 @@ msgid "" "disable.\n" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -774,7 +783,7 @@ msgstr "" msgid "ECB only operates on 16 bytes at a time" msgstr "" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" @@ -900,6 +909,7 @@ msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -1118,7 +1128,7 @@ msgstr "" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2836,6 +2846,10 @@ msgstr "" msgid "long int not supported in this build" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "" @@ -3188,6 +3202,8 @@ msgstr "" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3443,6 +3459,16 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/es.po b/locale/es.po index 6b8b96d2d..348af3406 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-10-27 21:01+0000\n" "Last-Translator: Adolfo Jayme Barrientos \n" "Language-Team: \n" @@ -295,11 +295,16 @@ msgstr "La dirección debe tener %d bytes de largo" msgid "Address type out of range" msgstr "Tipo de dirección fuera de rango" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Todos los periféricos I2C están siendo usados" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "Todos los FIFOs de RX en uso" @@ -420,6 +425,10 @@ msgstr "" "Auto-reload habilitado. Simplemente guarda los archivos via USB para " "ejecutarlos o entra al REPL para desabilitarlos.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -794,7 +803,7 @@ msgstr "Modo Drive no se usa cuando la dirección es input." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB solo opera sobre 16 bytes a la vez" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "Fallo ESP-IDF al tomar la memoria" @@ -920,6 +929,7 @@ msgid "File exists" msgstr "El archivo ya existe" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "Filtros muy complejos" @@ -1141,7 +1151,7 @@ msgstr "Pin inválido para canal derecho" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2909,6 +2919,10 @@ msgstr "variable local referenciada antes de la asignación" msgid "long int not supported in this build" msgstr "long int no soportado en esta compilación" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "cadena-f mal formada" @@ -3264,6 +3278,8 @@ msgstr "pow() con 3 argumentos requiere enteros" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3522,6 +3538,16 @@ msgstr "tuple index fuera de rango" msgid "tuple/list has wrong length" msgstr "tupla/lista tiene una longitud incorrecta" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/fil.po b/locale/fil.po index 838bca98b..7bc33dba3 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy \n" "Language-Team: fil\n" @@ -289,11 +289,16 @@ msgstr "ang palette ay dapat 32 bytes ang haba" msgid "Address type out of range" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Lahat ng I2C peripherals ginagamit" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -411,6 +416,10 @@ msgstr "" "Ang awtomatikong pag re-reload ay ON. i-save lamang ang mga files sa USB " "para patakbuhin sila o pasukin ang REPL para i-disable ito.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -785,7 +794,7 @@ msgstr "Drive mode ay hindi ginagamit kapag ang direksyon ay input." msgid "ECB only operates on 16 bytes at a time" msgstr "" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" @@ -913,6 +922,7 @@ msgid "File exists" msgstr "Mayroong file" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -1133,7 +1143,7 @@ msgstr "Mali ang pin para sa kanang channel" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2885,6 +2895,10 @@ msgstr "local variable na reference bago na i-assign" msgid "long int not supported in this build" msgstr "long int hindi sinusuportahan sa build na ito" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "" @@ -3239,6 +3253,8 @@ msgstr "pow() na may 3 argumento kailangan ng integers" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3498,6 +3514,16 @@ msgstr "indeks ng tuple wala sa sakop" msgid "tuple/list has wrong length" msgstr "mali ang haba ng tuple/list" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/fr.po b/locale/fr.po index b4a15ee1f..920e22cb0 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-10-22 20:48+0000\n" "Last-Translator: Antonin ENFRUN \n" "Language: fr\n" @@ -296,11 +296,16 @@ msgstr "L'adresse doit être longue de %d octets" msgid "Address type out of range" msgstr "Type d'adresse hors plage" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Tous les périphériques I2C sont utilisés" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "Tout les RX FIFOs sont utilisé" @@ -420,6 +425,10 @@ msgstr "" "Auto-chargement activé. Copiez simplement les fichiers en USB pour les " "lancer ou entrez sur REPL pour le désactiver.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -798,7 +807,7 @@ msgstr "Le mode Drive n'est pas utilisé quand la direction est 'input'." msgid "ECB only operates on 16 bytes at a time" msgstr "La BCE ne fonctionne que sur 16 octets à la fois" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "ESP-IDF échec d'allocation de la mémoire" @@ -925,6 +934,7 @@ msgid "File exists" msgstr "Le fichier existe" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "Filtre trop complexe" @@ -1146,7 +1156,7 @@ msgstr "Broche invalide pour le canal droit" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2931,6 +2941,10 @@ msgstr "variable locale référencée avant d'être assignée" msgid "long int not supported in this build" msgstr "entiers longs non supportés dans cette build" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "f-string mal formé" @@ -3288,6 +3302,8 @@ msgstr "pow() avec 3 arguments nécessite des entiers" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3546,6 +3562,16 @@ msgstr "index du tuple hors gamme" msgid "tuple/list has wrong length" msgstr "tuple/liste a une mauvaise longueur" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/hi.po b/locale/hi.po index 9174580a2..4966ad8e8 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -287,11 +287,16 @@ msgstr "" msgid "Address type out of range" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -406,6 +411,10 @@ msgid "" "disable.\n" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -774,7 +783,7 @@ msgstr "" msgid "ECB only operates on 16 bytes at a time" msgstr "" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" @@ -900,6 +909,7 @@ msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -1118,7 +1128,7 @@ msgstr "" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2836,6 +2846,10 @@ msgstr "" msgid "long int not supported in this build" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "" @@ -3188,6 +3202,8 @@ msgstr "" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3443,6 +3459,16 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/it_IT.po b/locale/it_IT.po index 6345c095c..82840c852 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin \n" "Language-Team: \n" @@ -288,11 +288,16 @@ msgstr "la palette deve essere lunga 32 byte" msgid "Address type out of range" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Tutte le periferiche I2C sono in uso" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -410,6 +415,10 @@ msgstr "" "L'auto-reload è attivo. Salva i file su USB per eseguirli o entra nel REPL " "per disabilitarlo.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -785,7 +794,7 @@ msgstr "" msgid "ECB only operates on 16 bytes at a time" msgstr "" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" @@ -913,6 +922,7 @@ msgid "File exists" msgstr "File esistente" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -1135,7 +1145,7 @@ msgstr "Pin non valido per il canale destro" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2887,6 +2897,10 @@ msgstr "variabile locale richiamata prima di un assegnamento" msgid "long int not supported in this build" msgstr "long int non supportata in questa build" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "" @@ -3246,6 +3260,8 @@ msgstr "pow() con 3 argomenti richiede interi" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3505,6 +3521,16 @@ msgstr "indice della tupla fuori intervallo" msgid "tuple/list has wrong length" msgstr "tupla/lista ha la lunghezza sbagliata" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/ja.po b/locale/ja.po index abd2e1803..ae7e51ba6 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-09-25 18:20+0000\n" "Last-Translator: Taku Fukada \n" "Language-Team: none\n" @@ -294,11 +294,16 @@ msgstr "アドレスは、%dバイト長でなければなりません" msgid "Address type out of range" msgstr "address_typeが範囲外" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "全てのI2C周辺機器が使用中" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "全てのRX FIFOが使用中" @@ -415,6 +420,10 @@ msgstr "" "オートリロードがオンです。ファイルをUSB経由で保存するだけで実行できます。REPL" "に入ると無効化します。\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -787,7 +796,7 @@ msgstr "方向がinputのときドライブモードは使われません" msgid "ECB only operates on 16 bytes at a time" msgstr "ECBは一度に16バイトの演算のみを行います" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" @@ -913,6 +922,7 @@ msgid "File exists" msgstr "ファイルが存在します" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -1133,7 +1143,7 @@ msgstr "右チャネルのピンが不正" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2866,6 +2876,10 @@ msgstr "" msgid "long int not supported in this build" msgstr "このビルドはlong intに非対応" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "不正な形式のf-string" @@ -3220,6 +3234,8 @@ msgstr "pow()の第3引数には整数が必要" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3476,6 +3492,16 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "タプル/リストの長さが正しくありません" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/ko.po b/locale/ko.po index e5b728b84..858a036c8 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-10-05 12:12+0000\n" "Last-Translator: Michal Čihař \n" "Language-Team: LANGUAGE \n" @@ -290,11 +290,16 @@ msgstr "" msgid "Address type out of range" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "사용중인 모든 I2C주변 기기" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -411,6 +416,10 @@ msgstr "" "자동 새로 고침이 켜져 있습니다. USB를 통해 파일을 저장하여 실행하십시오. 비활" "성화하려면 REPL을 입력하십시오.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -779,7 +788,7 @@ msgstr "" msgid "ECB only operates on 16 bytes at a time" msgstr "" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" @@ -905,6 +914,7 @@ msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -1123,7 +1133,7 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2842,6 +2852,10 @@ msgstr "" msgid "long int not supported in this build" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "" @@ -3194,6 +3208,8 @@ msgstr "" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3449,6 +3465,16 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/nl.po b/locale/nl.po index 234bb930a..bf05abb72 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-10-27 16:47+0000\n" "Last-Translator: Jelle Jager \n" "Language-Team: none\n" @@ -292,11 +292,16 @@ msgstr "Adres moet %d bytes lang zijn" msgid "Address type out of range" msgstr "Adres type buiten bereik" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Alle I2C peripherals zijn in gebruik" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "Alle RX FIFO's zijn in gebruik" @@ -413,6 +418,10 @@ msgstr "" "Auto-herlaad staat aan. Sla bestanden simpelweg op over USB om uit te voeren " "of start REPL om uit te schakelen.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -787,7 +796,7 @@ msgstr "Drive modus niet gebruikt als de richting input is." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB werkt alleen met 16 bytes tegelijkertijd" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "ESP-IDF geheugen toewijzing mislukt" @@ -913,6 +922,7 @@ msgid "File exists" msgstr "Bestand bestaat" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "Filters zijn te complex" @@ -1135,7 +1145,7 @@ msgstr "Ongeldige pin voor rechter kanaal" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2900,6 +2910,10 @@ msgstr "verwijzing naar een (nog) niet toegewezen lokale variabele" msgid "long int not supported in this build" msgstr "long int wordt niet ondersteund in deze build" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "onjuist gevormde f-string" @@ -3253,6 +3267,8 @@ msgstr "pow() met 3 argumenten vereist integers" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3510,6 +3526,16 @@ msgstr "tuple index buiten bereik" msgid "tuple/list has wrong length" msgstr "tuple of lijst heeft onjuiste lengte" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/pl.po b/locale/pl.po index cadb2c43e..1dbb0ba12 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-09-29 01:39+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" @@ -294,11 +294,16 @@ msgstr "Adres musi mieć %d bajtów" msgid "Address type out of range" msgstr "" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Wszystkie peryferia I2C w użyciu" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "" @@ -415,6 +420,10 @@ msgstr "" "Samo-przeładowywanie włączone. Po prostu zapisz pliki przez USB aby je " "uruchomić, albo wejdź w konsolę aby wyłączyć.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -787,7 +796,7 @@ msgstr "Tryb sterowania nieużywany w trybie wejścia." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB działa tylko na 16 bajtach naraz" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" @@ -913,6 +922,7 @@ msgid "File exists" msgstr "Plik istnieje" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" @@ -1133,7 +1143,7 @@ msgstr "Zła nóżka dla prawego kanału" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2859,6 +2869,10 @@ msgstr "zmienna lokalna użyta przed przypisaniem" msgid "long int not supported in this build" msgstr "long int jest nieobsługiwany" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "" @@ -3212,6 +3226,8 @@ msgstr "trzyargumentowe pow() wymaga liczb całkowitych" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3468,6 +3484,16 @@ msgstr "indeks krotki poza zakresem" msgid "tuple/list has wrong length" msgstr "krotka/lista ma złą długość" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 16631c32a..8696d7509 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-10-27 21:01+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" @@ -296,11 +296,16 @@ msgstr "O endereço deve ter %d bytes de comprimento" msgid "Address type out of range" msgstr "O tipo do endereço está fora do alcance" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Todos os periféricos I2C estão em uso" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "Todos os FIFOs RX estão em uso" @@ -419,6 +424,10 @@ msgstr "" "O recarregamento automático está ativo. Simplesmente salve os arquivos via " "USB para executá-los ou digite REPL para desativar.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -796,7 +805,7 @@ msgstr "O modo do controlador não é usado quando a direção for inserida." msgid "ECB only operates on 16 bytes at a time" msgstr "O BCE opera apenas com 16 bytes por vez" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "Houve uma falha na alocação da memória ESP-IDF" @@ -922,6 +931,7 @@ msgid "File exists" msgstr "Arquivo já existe" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "Os filtros são muito complexos" @@ -1144,7 +1154,7 @@ msgstr "Pino inválido para canal direito" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2920,6 +2930,10 @@ msgstr "a variável local referenciada antes da atribuição" msgid "long int not supported in this build" msgstr "o long int não é suportado nesta compilação" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "f-string malformado" @@ -3279,6 +3293,8 @@ msgstr "o pow() com 3 argumentos requer números inteiros" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3536,6 +3552,16 @@ msgstr "o índice da tupla está fora do intervalo" msgid "tuple/list has wrong length" msgstr "a tupla/lista está com tamanho incorreto" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/sv.po b/locale/sv.po index f2fa50189..53ed60aca 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-10-26 02:36+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" @@ -292,11 +292,16 @@ msgstr "Adressen måste vara %d byte lång" msgid "Address type out of range" msgstr "Adresstyp utanför intervallet" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "All I2C-kringutrustning används" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "Alla RX FIFO i bruk" @@ -413,6 +418,10 @@ msgstr "" "Autoladdning är på. Spara bara filer via USB för att köra dem eller ange " "REPL för att inaktivera.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -787,7 +796,7 @@ msgstr "Drivläge används inte när riktning är input." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB arbetar endast på 16 byte åt gången" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "ESP-IDF-minnetilldelning misslyckades" @@ -913,6 +922,7 @@ msgid "File exists" msgstr "Filen finns redan" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "Filter för komplexa" @@ -1133,7 +1143,7 @@ msgstr "Ogiltig pinne för höger kanal" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2893,6 +2903,10 @@ msgstr "lokal variabel refererad före tilldelning" msgid "long int not supported in this build" msgstr "long int stöds inte i denna build" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "f-sträng har felaktigt format" @@ -3246,6 +3260,8 @@ msgstr "pow() med 3 argument kräver heltal" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3503,6 +3519,16 @@ msgstr "tupelindex utanför intervallet" msgid "tuple/list has wrong length" msgstr "tupel/lista har fel längd" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 5ed34cc6c..9b32993eb 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-16 19:50-0500\n" +"POT-Creation-Date: 2020-10-21 20:13-0500\n" "PO-Revision-Date: 2020-10-22 20:48+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -294,11 +294,16 @@ msgstr "Dìzhǐ bìxū shì %d zì jié zhǎng" msgid "Address type out of range" msgstr "Dìzhǐ lèixíng chāochū fànwéi" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "All CAN peripherals are in use" +msgstr "" + #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "Suǒyǒu shǐyòng zhōng de RX FIFO" @@ -415,6 +420,10 @@ msgstr "" "Zìdòng chóngxīn jiāzài. Zhǐ xū tōngguò USB bǎocún wénjiàn lái yùnxíng tāmen " "huò shūrù REPL jìnyòng.\n" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "Baudrate not supported by peripheral" +msgstr "" + #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" @@ -785,7 +794,7 @@ msgstr "Fāngxiàng shūrù shí qūdòng móshì méiyǒu shǐyòng." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB yí cì zhǐ shǐ yòng 16 gè zì jié" -#: ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "ESP-IDF nèicún fēnpèi shībài" @@ -911,6 +920,7 @@ msgid "File exists" msgstr "Wénjiàn cúnzài" #: ports/atmel-samd/common-hal/canio/Listener.c +#: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "guò lǜ qì tài fù zá" @@ -1131,7 +1141,7 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào" #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c -#: ports/esp32s2/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -2883,6 +2893,10 @@ msgstr "fùzhí qián yǐnyòng de júbù biànliàng" msgid "long int not supported in this build" msgstr "cǐ bǎnběn bù zhīchí zhǎng zhěngshù" +#: ports/esp32s2/common-hal/canio/CAN.c +msgid "loopback + silent mode not supported by peripheral" +msgstr "" + #: py/parse.c msgid "malformed f-string" msgstr "jīxíng de f-string" @@ -3235,6 +3249,8 @@ msgstr "pow() yǒu 3 cānshù xūyào zhěngshù" #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h msgid "pressing boot button at start up.\n" @@ -3492,6 +3508,16 @@ msgstr "yuán zǔ suǒyǐn chāochū fànwéi" msgid "tuple/list has wrong length" msgstr "yuán zǔ/lièbiǎo chángdù cuòwù" +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_driver_install returned esp-idf error #%d" +msgstr "" + +#: ports/esp32s2/common-hal/canio/CAN.c +#, c-format +msgid "twai_start returned esp-idf error #%d" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c -- cgit v1.2.3 From d0426b3438a934257c5351f7eb2d9cdd79881c03 Mon Sep 17 00:00:00 2001 From: Noel Gaetan Date: Tue, 27 Oct 2020 23:54:46 +0100 Subject: Update pins.c fix mistake --- ports/nrf/boards/holyiot_nrf52840/pins.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/ports/nrf/boards/holyiot_nrf52840/pins.c b/ports/nrf/boards/holyiot_nrf52840/pins.c index 4e2593e58..cdec4dfa8 100644 --- a/ports/nrf/boards/holyiot_nrf52840/pins.c +++ b/ports/nrf/boards/holyiot_nrf52840/pins.c @@ -51,9 +51,9 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR_P0_21), MP_ROM_PTR(&pin_P0_21) }, { MP_ROM_QSTR(MP_QSTR_P0_19), MP_ROM_PTR(&pin_P0_19) }, - // RESET { MP_ROM_QSTR(MP_QSTR_P0_18), MP_ROM_PTR(&pin_P0_18) }, + // RESET { MP_ROM_QSTR(MP_QSTR_P0_18), MP_ROM_PTR(&pin_P0_18) } }; -MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); \ No newline at end of file +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); -- cgit v1.2.3 From 27827a4fef74dc66996ecb670f01ad5d58500899 Mon Sep 17 00:00:00 2001 From: Gaetan Date: Wed, 28 Oct 2020 00:34:07 +0100 Subject: Fix EOF error modifié : mpconfigboard.mk modifié : pins.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk | 2 +- ports/nrf/boards/holyiot_nrf52840/pins.c | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk b/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk index d85de7507..ead205953 100644 --- a/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk +++ b/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk @@ -5,4 +5,4 @@ USB_MANUFACTURER = "Holyiot" MCU_CHIP = nrf52840 -INTERNAL_FLASH_FILESYSTEM = 1 \ No newline at end of file +INTERNAL_FLASH_FILESYSTEM = 1 diff --git a/ports/nrf/boards/holyiot_nrf52840/pins.c b/ports/nrf/boards/holyiot_nrf52840/pins.c index 4e2593e58..604744e0e 100644 --- a/ports/nrf/boards/holyiot_nrf52840/pins.c +++ b/ports/nrf/boards/holyiot_nrf52840/pins.c @@ -43,7 +43,6 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR_P0_13), MP_ROM_PTR(&pin_P0_13) }, { MP_ROM_QSTR(MP_QSTR_P0_16), MP_ROM_PTR(&pin_P0_16) }, - { MP_ROM_QSTR(MP_QSTR_P0_07), MP_ROM_PTR(&pin_P0_07) }, { MP_ROM_QSTR(MP_QSTR_P1_09), MP_ROM_PTR(&pin_P1_09) }, { MP_ROM_QSTR(MP_QSTR_P0_12), MP_ROM_PTR(&pin_P0_12) }, @@ -55,5 +54,4 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = { }; - -MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); \ No newline at end of file +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); -- cgit v1.2.3 From 9b911b2211715e9da7ae55b691f54fe2f33a4486 Mon Sep 17 00:00:00 2001 From: Gaetan Date: Wed, 28 Oct 2020 00:38:07 +0100 Subject: modifié : pins.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- ports/nrf/boards/holyiot_nrf52840/pins.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/ports/nrf/boards/holyiot_nrf52840/pins.c b/ports/nrf/boards/holyiot_nrf52840/pins.c index 604744e0e..8e0667591 100644 --- a/ports/nrf/boards/holyiot_nrf52840/pins.c +++ b/ports/nrf/boards/holyiot_nrf52840/pins.c @@ -50,8 +50,12 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR_P0_21), MP_ROM_PTR(&pin_P0_21) }, { MP_ROM_QSTR(MP_QSTR_P0_19), MP_ROM_PTR(&pin_P0_19) }, - // RESET { MP_ROM_QSTR(MP_QSTR_P0_18), MP_ROM_PTR(&pin_P0_18) }, + // RESET { MP_ROM_QSTR(MP_QSTR_P0_18), MP_ROM_PTR(&pin_P0_18) } }; +<<<<<<< HEAD +======= + +>>>>>>> d0426b3438a934257c5351f7eb2d9cdd79881c03 MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); -- cgit v1.2.3 From b44011d196a0a7294fca1e1825054761979ba075 Mon Sep 17 00:00:00 2001 From: Gaetan Date: Wed, 28 Oct 2020 01:43:42 +0100 Subject: fix railing Whitespace pin.c --- ports/nrf/boards/holyiot_nrf52840/pins.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/nrf/boards/holyiot_nrf52840/pins.c b/ports/nrf/boards/holyiot_nrf52840/pins.c index c9e222b67..83be4f0ac 100644 --- a/ports/nrf/boards/holyiot_nrf52840/pins.c +++ b/ports/nrf/boards/holyiot_nrf52840/pins.c @@ -49,7 +49,7 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR_P0_23), MP_ROM_PTR(&pin_P0_23) }, { MP_ROM_QSTR(MP_QSTR_P0_21), MP_ROM_PTR(&pin_P0_21) }, { MP_ROM_QSTR(MP_QSTR_P0_19), MP_ROM_PTR(&pin_P0_19) }, - + // RESET { MP_ROM_QSTR(MP_QSTR_P0_18), MP_ROM_PTR(&pin_P0_18) } }; -- cgit v1.2.3 From 5e3bfa1956ca4d327fcad23ce508ebbdaeac4d69 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Wed, 28 Oct 2020 20:08:25 +0530 Subject: countio implementation for esp32s2 --- ports/esp32s2/common-hal/countio/Counter.c | 69 +++++++++++++++++++++++++++++ ports/esp32s2/common-hal/countio/Counter.h | 15 +++++++ ports/esp32s2/common-hal/countio/__init__.c | 1 + ports/esp32s2/mpconfigport.mk | 2 +- 4 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 ports/esp32s2/common-hal/countio/Counter.c create mode 100644 ports/esp32s2/common-hal/countio/Counter.h create mode 100644 ports/esp32s2/common-hal/countio/__init__.c diff --git a/ports/esp32s2/common-hal/countio/Counter.c b/ports/esp32s2/common-hal/countio/Counter.c new file mode 100644 index 000000000..6a76a163d --- /dev/null +++ b/ports/esp32s2/common-hal/countio/Counter.c @@ -0,0 +1,69 @@ +#include "common-hal/countio/Counter.h" + +#include "py/runtime.h" +#include "supervisor/shared/translate.h" + +#include "driver/pcnt.h" + +static void pcnt_init(countio_counter_obj_t* self) { + int unit = PCNT_UNIT_0; + // Prepare configuration for the PCNT unit + pcnt_config_t pcnt_config = { + // Set PCNT input signal and control GPIOs + .pulse_gpio_num = self->pin->number, + .ctrl_gpio_num = PCNT_PIN_NOT_USED, + .channel = PCNT_CHANNEL_0, + .unit = unit, + // What to do on the positive / negative edge of pulse input? + .pos_mode = PCNT_COUNT_INC, // Count up on the positive edge + .neg_mode = PCNT_COUNT_DIS, // Keep the counter value on the negative edge + }; + // Initialize PCNT unit + pcnt_unit_config(&pcnt_config); + + // Configure and enable the input filter + pcnt_set_filter_value(unit, 100); + pcnt_filter_enable(unit); + + // Initialize PCNT's counter + pcnt_counter_pause(unit); + pcnt_counter_clear(unit); + + // Everything is set up, now go to counting + pcnt_counter_resume(unit); +} + +void common_hal_countio_counter_construct(countio_counter_obj_t* self, + const mcu_pin_obj_t* pin) { + claim_pin(pin); + self->pin = pin; + pcnt_init(self); +} + +bool common_hal_countio_counter_deinited(countio_counter_obj_t* self) { + return self->pin == NULL; +} + +void common_hal_countio_counter_deinit(countio_counter_obj_t* self) { + if (common_hal_countio_counter_deinited(self)) { + return; + } + reset_pin_number(self->pin->number); + self->pin = NULL; +} + +mp_int_t common_hal_countio_counter_get_count(countio_counter_obj_t* self) { + int16_t count; + pcnt_get_counter_value(PCNT_UNIT_0, &count); + return count+self->count; +} + +void common_hal_countio_counter_set_count(countio_counter_obj_t* self, + mp_int_t new_count) { + self->count = new_count; + pcnt_counter_clear(PCNT_UNIT_0); +} + +void common_hal_countio_counter_reset(countio_counter_obj_t* self) { + common_hal_countio_counter_set_count(self, 0); +} diff --git a/ports/esp32s2/common-hal/countio/Counter.h b/ports/esp32s2/common-hal/countio/Counter.h new file mode 100644 index 000000000..3406f9daa --- /dev/null +++ b/ports/esp32s2/common-hal/countio/Counter.h @@ -0,0 +1,15 @@ + +#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNTER_H +#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNTER_H + +#include "common-hal/microcontroller/Pin.h" + +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; + const mcu_pin_obj_t * pin; + mp_int_t count; +} countio_counter_obj_t; + +#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNT_H diff --git a/ports/esp32s2/common-hal/countio/__init__.c b/ports/esp32s2/common-hal/countio/__init__.c new file mode 100644 index 000000000..b95b20d15 --- /dev/null +++ b/ports/esp32s2/common-hal/countio/__init__.c @@ -0,0 +1 @@ +//No countio module functions diff --git a/ports/esp32s2/mpconfigport.mk b/ports/esp32s2/mpconfigport.mk index c06c89c90..bdb25a87b 100644 --- a/ports/esp32s2/mpconfigport.mk +++ b/ports/esp32s2/mpconfigport.mk @@ -17,7 +17,7 @@ CIRCUITPY_FULL_BUILD = 1 CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_AUDIOIO = 0 CIRCUITPY_CANIO = 1 -CIRCUITPY_COUNTIO = 0 +CIRCUITPY_COUNTIO = 1 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_I2CPERIPHERAL = 0 CIRCUITPY_ROTARYIO = 0 -- cgit v1.2.3 From 5ab2f16f64f0935ac8ad6fa776c435d55a3cff1e Mon Sep 17 00:00:00 2001 From: Gaetan Date: Wed, 28 Oct 2020 22:08:10 +0100 Subject: Change Board Name to ADM_B_NRF52840_1 edit : .github/workflows/build.yml rename : ports/nrf/boards/holyiot_nrf52840/board.c -> ports/nrf/boards/ADM_B_NRF52840_1/board.c rename : ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.h rename : ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.mk rename : ports/nrf/boards/holyiot_nrf52840/pins.c -> ports/nrf/boards/ADM_B_NRF52840_1/pins.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- .github/workflows/build.yml | 2 +- ports/nrf/boards/ADM_B_NRF52840_1/board.c | 38 +++++++++++++++ ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.h | 33 +++++++++++++ ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.mk | 8 +++ ports/nrf/boards/ADM_B_NRF52840_1/pins.c | 57 ++++++++++++++++++++++ ports/nrf/boards/holyiot_nrf52840/board.c | 38 --------------- ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h | 33 ------------- ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk | 8 --- ports/nrf/boards/holyiot_nrf52840/pins.c | 57 ---------------------- 9 files changed, 137 insertions(+), 137 deletions(-) create mode 100644 ports/nrf/boards/ADM_B_NRF52840_1/board.c create mode 100644 ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.h create mode 100644 ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.mk create mode 100644 ports/nrf/boards/ADM_B_NRF52840_1/pins.c delete mode 100644 ports/nrf/boards/holyiot_nrf52840/board.c delete mode 100644 ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h delete mode 100644 ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk delete mode 100644 ports/nrf/boards/holyiot_nrf52840/pins.c diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index cada55aaa..1a967046c 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -162,6 +162,7 @@ jobs: board: - "8086_commander" - "TG-Watch02A" + - "ADM_B_NRF52840_1" - "aloriumtech_evo_m51" - "aramcon_badge_2019" - "arduino_mkr1300" @@ -214,7 +215,6 @@ jobs: - "hallowing_m0_express" - "hallowing_m4_express" - "hiibot_bluefi" - - "holyiot_nrf52840" - "ikigaisense_vita" - "imxrt1010_evk" - "imxrt1020_evk" diff --git a/ports/nrf/boards/ADM_B_NRF52840_1/board.c b/ports/nrf/boards/ADM_B_NRF52840_1/board.c new file mode 100644 index 000000000..4421970ee --- /dev/null +++ b/ports/nrf/boards/ADM_B_NRF52840_1/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.h b/ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.h new file mode 100644 index 000000000..575d09feb --- /dev/null +++ b/ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.h @@ -0,0 +1,33 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2016 Glenn Ruben Bakke + * + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "nrfx/hal/nrf_gpio.h" + +#define MICROPY_HW_BOARD_NAME "AtelierDuMaker nRF52840 Breakout" +#define MICROPY_HW_MCU_NAME "nRF52840" + +#define MICROPY_HW_LED_STATUS (&pin_P0_19) diff --git a/ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.mk b/ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.mk new file mode 100644 index 000000000..f3a2e830d --- /dev/null +++ b/ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.mk @@ -0,0 +1,8 @@ +USB_VID = 0x239A +USB_PID = 0x80A0 +USB_PRODUCT = "ADM_B_NRF52840_1" +USB_MANUFACTURER = "AtelierDuMaker" + +MCU_CHIP = nrf52840 + +INTERNAL_FLASH_FILESYSTEM = 1 diff --git a/ports/nrf/boards/ADM_B_NRF52840_1/pins.c b/ports/nrf/boards/ADM_B_NRF52840_1/pins.c new file mode 100644 index 000000000..83be4f0ac --- /dev/null +++ b/ports/nrf/boards/ADM_B_NRF52840_1/pins.c @@ -0,0 +1,57 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_module_globals_table[] = { + + { MP_ROM_QSTR(MP_QSTR_P1_10), MP_ROM_PTR(&pin_P0_02) }, + { MP_ROM_QSTR(MP_QSTR_P1_11), MP_ROM_PTR(&pin_P1_11) }, + { MP_ROM_QSTR(MP_QSTR_P1_13), MP_ROM_PTR(&pin_P1_13) }, + { MP_ROM_QSTR(MP_QSTR_P1_15), MP_ROM_PTR(&pin_P1_15) }, + { MP_ROM_QSTR(MP_QSTR_P0_03), MP_ROM_PTR(&pin_P0_03) }, + { MP_ROM_QSTR(MP_QSTR_P0_02), MP_ROM_PTR(&pin_P0_02) }, + { MP_ROM_QSTR(MP_QSTR_P0_28), MP_ROM_PTR(&pin_P0_28) }, + { MP_ROM_QSTR(MP_QSTR_P0_29), MP_ROM_PTR(&pin_P0_29) }, + { MP_ROM_QSTR(MP_QSTR_P0_30), MP_ROM_PTR(&pin_P0_30) }, + { MP_ROM_QSTR(MP_QSTR_P0_31), MP_ROM_PTR(&pin_P0_31) }, + { MP_ROM_QSTR(MP_QSTR_P0_04), MP_ROM_PTR(&pin_P0_04) }, + { MP_ROM_QSTR(MP_QSTR_P0_05), MP_ROM_PTR(&pin_P0_05) }, + { MP_ROM_QSTR(MP_QSTR_P1_14), MP_ROM_PTR(&pin_P1_14) }, + { MP_ROM_QSTR(MP_QSTR_P1_12), MP_ROM_PTR(&pin_P1_12) }, + { MP_ROM_QSTR(MP_QSTR_P0_25), MP_ROM_PTR(&pin_P0_25) }, + { MP_ROM_QSTR(MP_QSTR_P0_11), MP_ROM_PTR(&pin_P0_11) }, + { MP_ROM_QSTR(MP_QSTR_P1_08), MP_ROM_PTR(&pin_P1_08) }, + { MP_ROM_QSTR(MP_QSTR_P0_27), MP_ROM_PTR(&pin_P0_28) }, + { MP_ROM_QSTR(MP_QSTR_P0_08), MP_ROM_PTR(&pin_P0_08) }, + { MP_ROM_QSTR(MP_QSTR_P0_06), MP_ROM_PTR(&pin_P0_06) }, + { MP_ROM_QSTR(MP_QSTR_P0_26), MP_ROM_PTR(&pin_P0_26) }, + + { MP_ROM_QSTR(MP_QSTR_P0_10), MP_ROM_PTR(&pin_P0_10) }, + { MP_ROM_QSTR(MP_QSTR_P0_09), MP_ROM_PTR(&pin_P0_09) }, + { MP_ROM_QSTR(MP_QSTR_P1_06), MP_ROM_PTR(&pin_P1_06) }, + { MP_ROM_QSTR(MP_QSTR_P1_04), MP_ROM_PTR(&pin_P1_04) }, + { MP_ROM_QSTR(MP_QSTR_P1_02), MP_ROM_PTR(&pin_P1_02) }, + { MP_ROM_QSTR(MP_QSTR_P1_01), MP_ROM_PTR(&pin_P1_01) }, + { MP_ROM_QSTR(MP_QSTR_P1_03), MP_ROM_PTR(&pin_P1_03) }, + { MP_ROM_QSTR(MP_QSTR_P1_00), MP_ROM_PTR(&pin_P1_00) }, + { MP_ROM_QSTR(MP_QSTR_P0_22), MP_ROM_PTR(&pin_P0_22) }, + { MP_ROM_QSTR(MP_QSTR_P1_07), MP_ROM_PTR(&pin_P1_07) }, + { MP_ROM_QSTR(MP_QSTR_P1_05), MP_ROM_PTR(&pin_P1_05) }, + { MP_ROM_QSTR(MP_QSTR_P0_24), MP_ROM_PTR(&pin_P0_24) }, + { MP_ROM_QSTR(MP_QSTR_P0_20), MP_ROM_PTR(&pin_P0_20) }, + { MP_ROM_QSTR(MP_QSTR_P0_17), MP_ROM_PTR(&pin_P0_17) }, + { MP_ROM_QSTR(MP_QSTR_P0_15), MP_ROM_PTR(&pin_P0_15) }, + { MP_ROM_QSTR(MP_QSTR_P0_14), MP_ROM_PTR(&pin_P0_14) }, + { MP_ROM_QSTR(MP_QSTR_P0_13), MP_ROM_PTR(&pin_P0_13) }, + { MP_ROM_QSTR(MP_QSTR_P0_16), MP_ROM_PTR(&pin_P0_16) }, + + { MP_ROM_QSTR(MP_QSTR_P0_07), MP_ROM_PTR(&pin_P0_07) }, + { MP_ROM_QSTR(MP_QSTR_P1_09), MP_ROM_PTR(&pin_P1_09) }, + { MP_ROM_QSTR(MP_QSTR_P0_12), MP_ROM_PTR(&pin_P0_12) }, + { MP_ROM_QSTR(MP_QSTR_P0_23), MP_ROM_PTR(&pin_P0_23) }, + { MP_ROM_QSTR(MP_QSTR_P0_21), MP_ROM_PTR(&pin_P0_21) }, + { MP_ROM_QSTR(MP_QSTR_P0_19), MP_ROM_PTR(&pin_P0_19) }, + + // RESET { MP_ROM_QSTR(MP_QSTR_P0_18), MP_ROM_PTR(&pin_P0_18) } + +}; + +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); diff --git a/ports/nrf/boards/holyiot_nrf52840/board.c b/ports/nrf/boards/holyiot_nrf52840/board.c deleted file mode 100644 index 4421970ee..000000000 --- a/ports/nrf/boards/holyiot_nrf52840/board.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "boards/board.h" - -void board_init(void) { -} - -bool board_requests_safe_mode(void) { - return false; -} - -void reset_board(void) { - -} diff --git a/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h b/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h deleted file mode 100644 index 3b64d3a62..000000000 --- a/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2016 Glenn Ruben Bakke - * - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "nrfx/hal/nrf_gpio.h" - -#define MICROPY_HW_BOARD_NAME "Holyiot nRF52840" -#define MICROPY_HW_MCU_NAME "nRF52840" - -#define MICROPY_HW_LED_STATUS (&pin_P0_19) diff --git a/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk b/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk deleted file mode 100644 index ead205953..000000000 --- a/ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk +++ /dev/null @@ -1,8 +0,0 @@ -USB_VID = 0x239A -USB_PID = 0x80A0 -USB_PRODUCT = "HOLYIOTNRF52840" -USB_MANUFACTURER = "Holyiot" - -MCU_CHIP = nrf52840 - -INTERNAL_FLASH_FILESYSTEM = 1 diff --git a/ports/nrf/boards/holyiot_nrf52840/pins.c b/ports/nrf/boards/holyiot_nrf52840/pins.c deleted file mode 100644 index 83be4f0ac..000000000 --- a/ports/nrf/boards/holyiot_nrf52840/pins.c +++ /dev/null @@ -1,57 +0,0 @@ -#include "shared-bindings/board/__init__.h" - -STATIC const mp_rom_map_elem_t board_module_globals_table[] = { - - { MP_ROM_QSTR(MP_QSTR_P1_10), MP_ROM_PTR(&pin_P0_02) }, - { MP_ROM_QSTR(MP_QSTR_P1_11), MP_ROM_PTR(&pin_P1_11) }, - { MP_ROM_QSTR(MP_QSTR_P1_13), MP_ROM_PTR(&pin_P1_13) }, - { MP_ROM_QSTR(MP_QSTR_P1_15), MP_ROM_PTR(&pin_P1_15) }, - { MP_ROM_QSTR(MP_QSTR_P0_03), MP_ROM_PTR(&pin_P0_03) }, - { MP_ROM_QSTR(MP_QSTR_P0_02), MP_ROM_PTR(&pin_P0_02) }, - { MP_ROM_QSTR(MP_QSTR_P0_28), MP_ROM_PTR(&pin_P0_28) }, - { MP_ROM_QSTR(MP_QSTR_P0_29), MP_ROM_PTR(&pin_P0_29) }, - { MP_ROM_QSTR(MP_QSTR_P0_30), MP_ROM_PTR(&pin_P0_30) }, - { MP_ROM_QSTR(MP_QSTR_P0_31), MP_ROM_PTR(&pin_P0_31) }, - { MP_ROM_QSTR(MP_QSTR_P0_04), MP_ROM_PTR(&pin_P0_04) }, - { MP_ROM_QSTR(MP_QSTR_P0_05), MP_ROM_PTR(&pin_P0_05) }, - { MP_ROM_QSTR(MP_QSTR_P1_14), MP_ROM_PTR(&pin_P1_14) }, - { MP_ROM_QSTR(MP_QSTR_P1_12), MP_ROM_PTR(&pin_P1_12) }, - { MP_ROM_QSTR(MP_QSTR_P0_25), MP_ROM_PTR(&pin_P0_25) }, - { MP_ROM_QSTR(MP_QSTR_P0_11), MP_ROM_PTR(&pin_P0_11) }, - { MP_ROM_QSTR(MP_QSTR_P1_08), MP_ROM_PTR(&pin_P1_08) }, - { MP_ROM_QSTR(MP_QSTR_P0_27), MP_ROM_PTR(&pin_P0_28) }, - { MP_ROM_QSTR(MP_QSTR_P0_08), MP_ROM_PTR(&pin_P0_08) }, - { MP_ROM_QSTR(MP_QSTR_P0_06), MP_ROM_PTR(&pin_P0_06) }, - { MP_ROM_QSTR(MP_QSTR_P0_26), MP_ROM_PTR(&pin_P0_26) }, - - { MP_ROM_QSTR(MP_QSTR_P0_10), MP_ROM_PTR(&pin_P0_10) }, - { MP_ROM_QSTR(MP_QSTR_P0_09), MP_ROM_PTR(&pin_P0_09) }, - { MP_ROM_QSTR(MP_QSTR_P1_06), MP_ROM_PTR(&pin_P1_06) }, - { MP_ROM_QSTR(MP_QSTR_P1_04), MP_ROM_PTR(&pin_P1_04) }, - { MP_ROM_QSTR(MP_QSTR_P1_02), MP_ROM_PTR(&pin_P1_02) }, - { MP_ROM_QSTR(MP_QSTR_P1_01), MP_ROM_PTR(&pin_P1_01) }, - { MP_ROM_QSTR(MP_QSTR_P1_03), MP_ROM_PTR(&pin_P1_03) }, - { MP_ROM_QSTR(MP_QSTR_P1_00), MP_ROM_PTR(&pin_P1_00) }, - { MP_ROM_QSTR(MP_QSTR_P0_22), MP_ROM_PTR(&pin_P0_22) }, - { MP_ROM_QSTR(MP_QSTR_P1_07), MP_ROM_PTR(&pin_P1_07) }, - { MP_ROM_QSTR(MP_QSTR_P1_05), MP_ROM_PTR(&pin_P1_05) }, - { MP_ROM_QSTR(MP_QSTR_P0_24), MP_ROM_PTR(&pin_P0_24) }, - { MP_ROM_QSTR(MP_QSTR_P0_20), MP_ROM_PTR(&pin_P0_20) }, - { MP_ROM_QSTR(MP_QSTR_P0_17), MP_ROM_PTR(&pin_P0_17) }, - { MP_ROM_QSTR(MP_QSTR_P0_15), MP_ROM_PTR(&pin_P0_15) }, - { MP_ROM_QSTR(MP_QSTR_P0_14), MP_ROM_PTR(&pin_P0_14) }, - { MP_ROM_QSTR(MP_QSTR_P0_13), MP_ROM_PTR(&pin_P0_13) }, - { MP_ROM_QSTR(MP_QSTR_P0_16), MP_ROM_PTR(&pin_P0_16) }, - - { MP_ROM_QSTR(MP_QSTR_P0_07), MP_ROM_PTR(&pin_P0_07) }, - { MP_ROM_QSTR(MP_QSTR_P1_09), MP_ROM_PTR(&pin_P1_09) }, - { MP_ROM_QSTR(MP_QSTR_P0_12), MP_ROM_PTR(&pin_P0_12) }, - { MP_ROM_QSTR(MP_QSTR_P0_23), MP_ROM_PTR(&pin_P0_23) }, - { MP_ROM_QSTR(MP_QSTR_P0_21), MP_ROM_PTR(&pin_P0_21) }, - { MP_ROM_QSTR(MP_QSTR_P0_19), MP_ROM_PTR(&pin_P0_19) }, - - // RESET { MP_ROM_QSTR(MP_QSTR_P0_18), MP_ROM_PTR(&pin_P0_18) } - -}; - -MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); -- cgit v1.2.3 From 3dcee5be803a4d6bd9f05ecb13608467dc2e3a55 Mon Sep 17 00:00:00 2001 From: Gaetan Date: Wed, 28 Oct 2020 22:38:13 +0100 Subject: Fix: .github/workflows/build.yml --- .github/workflows/build.yml | 49 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 9 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 1a967046c..2f61b6041 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -28,7 +28,7 @@ jobs: - name: CircuitPython version run: | git describe --dirty --tags - echo "::set-env name=CP_VERSION::$(git describe --dirty --tags)" + echo >>$GITHUB_ENV CP_VERSION=$(git describe --dirty --tags) - name: Set up Python 3.8 uses: actions/setup-python@v1 with: @@ -36,7 +36,7 @@ jobs: - name: Install deps run: | sudo apt-get install -y eatmydata - sudo eatmydata apt-get install -y gettext librsvg2-bin mingw-w64 + sudo eatmydata apt-get install -y gettext librsvg2-bin mingw-w64 latexmk texlive-fonts-recommended texlive-latex-recommended texlive-latex-extra pip install requests sh click setuptools cpp-coveralls "Sphinx<4" sphinx-rtd-theme recommonmark sphinx-autoapi sphinxcontrib-svg2pdfconverter polib pyyaml astroid isort black awscli - name: Versions run: | @@ -73,17 +73,26 @@ jobs: with: name: stubs path: circuitpython-stubs* - - name: Docs + - name: Test Documentation Build (HTML) run: sphinx-build -E -W -b html -D version=${{ env.CP_VERSION }} -D release=${{ env.CP_VERSION }} . _build/html - uses: actions/upload-artifact@v2 with: name: docs path: _build/html + - name: Test Documentation Build (LaTeX/PDF) + run: | + make latexpdf + - uses: actions/upload-artifact@v2 + with: + name: docs + path: _build/latex - name: Translations run: make check-translate - name: New boards check run: python3 -u ci_new_boards_check.py working-directory: tools + - name: Duplicate USB VID/PID Check + run: python3 -u -m tools.ci_check_duplicate_usb_vid_pid - name: Build mpy-cross.static-raspbian run: make -C mpy-cross -j2 -f Makefile.static-raspbian - uses: actions/upload-artifact@v2 @@ -122,8 +131,8 @@ jobs: run: echo "$GITHUB_CONTEXT" - name: Install dependencies run: | - brew install gettext awscli - echo "::set-env name=PATH::/usr/local/opt/gettext/bin:$PATH" + brew install gettext + echo >>$GITHUB_PATH /usr/local/opt/gettext/bin - name: Versions run: | gcc --version @@ -137,7 +146,7 @@ jobs: - name: CircuitPython version run: | git describe --dirty --tags - echo "::set-env name=CP_VERSION::$(git describe --dirty --tags)" + echo >>$GITHUB_ENV CP_VERSION=$(git describe --dirty --tags) - name: Build mpy-cross run: make -C mpy-cross -j2 - uses: actions/upload-artifact@v2 @@ -161,8 +170,8 @@ jobs: matrix: board: - "8086_commander" - - "TG-Watch02A" - "ADM_B_NRF52840_1" + - "TG-Watch02A" - "aloriumtech_evo_m51" - "aramcon_badge_2019" - "arduino_mkr1300" @@ -171,7 +180,8 @@ jobs: - "arduino_nano_33_iot" - "arduino_zero" - "bast_pro_mini_m0" - - "bdmicro_vina_m0" + - "bdmicro_vina_d21" + - "bdmicro_vina_d51" - "bless_dev_board_multi_sensor" - "blm_badge" - "capablerobot_usbhub" @@ -189,6 +199,8 @@ jobs: - "datum_imu" - "datum_light" - "datum_weather" + - "dynossat_edu_eps" + - "dynossat_edu_obc" - "electronut_labs_blip" - "electronut_labs_papyr" - "escornabot_makech" @@ -202,6 +214,7 @@ jobs: - "feather_m0_rfm69" - "feather_m0_rfm9x" - "feather_m0_supersized" + - "feather_m4_can" - "feather_m4_express" - "feather_m7_1011" - "feather_mimxrt1011" @@ -228,11 +241,13 @@ jobs: - "makerdiary_nrf52840_m2_devkit" - "makerdiary_nrf52840_mdk" - "makerdiary_nrf52840_mdk_usb_dongle" + - "matrixportal_m4" - "meowbit_v121" - "meowmeow" - "metro_m0_express" - "metro_m4_airlift_lite" - "metro_m4_express" + - "metro_m7_1011" - "metro_nrf52840_express" - "mini_sam_m4" - "monster_m4sk" @@ -254,6 +269,7 @@ jobs: - "pca10100" - "pewpew10" - "pewpew_m4" + - "picoplanet" - "pirkey_m0" - "pitaya_go" - "pyb_nano_v2" @@ -267,6 +283,8 @@ jobs: - "pyportal" - "pyportal_titano" - "pyruler" + - "qtpy_m0" + - "qtpy_m0_haxpress" - "raytac_mdbt50q-db-40" - "robohatmm1_m4" - "sam32" @@ -401,9 +419,17 @@ jobs: fail-fast: false matrix: board: + - "adafruit_metro_esp32s2" + - "electroniccats_bastwifi" + - "espressif_kaluga_1" - "espressif_saola_1_wroom" - "espressif_saola_1_wrover" + - "microdev_micro_s2" + - "muselab_nanoesp32_s2" + - "targett_module_clip_wroom" + - "targett_module_clip_wrover" - "unexpectedmaker_feathers2" + - "unexpectedmaker_feathers2_prerelease" steps: - name: Set up Python 3.8 @@ -423,6 +449,11 @@ jobs: with: path: ${{ github.workspace }}/.idf_tools key: ${{ runner.os }}-idf-tools-${{ hashFiles('.git/modules/ports/esp32s2/esp-idf/HEAD') }}-20200801 + - name: Clone IDF submodules + run: | + (cd $IDF_PATH && git submodule update --init) + env: + IDF_PATH: ${{ github.workspace }}/ports/esp32s2/esp-idf - name: Install IDF tools run: | $IDF_PATH/tools/idf_tools.py --non-interactive install required @@ -473,4 +504,4 @@ jobs: env: AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} - if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) + if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) \ No newline at end of file -- cgit v1.2.3 From 34ce8d8642d43397627e6001b221039d7190db5b Mon Sep 17 00:00:00 2001 From: Noel Gaetan Date: Wed, 28 Oct 2020 22:43:54 +0100 Subject: Update build.yml --- .github/workflows/build.yml | 47 ++++++++------------------------------------- 1 file changed, 8 insertions(+), 39 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 2f61b6041..6619cbdf2 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -28,7 +28,7 @@ jobs: - name: CircuitPython version run: | git describe --dirty --tags - echo >>$GITHUB_ENV CP_VERSION=$(git describe --dirty --tags) + echo "::set-env name=CP_VERSION::$(git describe --dirty --tags)" - name: Set up Python 3.8 uses: actions/setup-python@v1 with: @@ -36,7 +36,7 @@ jobs: - name: Install deps run: | sudo apt-get install -y eatmydata - sudo eatmydata apt-get install -y gettext librsvg2-bin mingw-w64 latexmk texlive-fonts-recommended texlive-latex-recommended texlive-latex-extra + sudo eatmydata apt-get install -y gettext librsvg2-bin mingw-w64 pip install requests sh click setuptools cpp-coveralls "Sphinx<4" sphinx-rtd-theme recommonmark sphinx-autoapi sphinxcontrib-svg2pdfconverter polib pyyaml astroid isort black awscli - name: Versions run: | @@ -73,26 +73,17 @@ jobs: with: name: stubs path: circuitpython-stubs* - - name: Test Documentation Build (HTML) + - name: Docs run: sphinx-build -E -W -b html -D version=${{ env.CP_VERSION }} -D release=${{ env.CP_VERSION }} . _build/html - uses: actions/upload-artifact@v2 with: name: docs path: _build/html - - name: Test Documentation Build (LaTeX/PDF) - run: | - make latexpdf - - uses: actions/upload-artifact@v2 - with: - name: docs - path: _build/latex - name: Translations run: make check-translate - name: New boards check run: python3 -u ci_new_boards_check.py working-directory: tools - - name: Duplicate USB VID/PID Check - run: python3 -u -m tools.ci_check_duplicate_usb_vid_pid - name: Build mpy-cross.static-raspbian run: make -C mpy-cross -j2 -f Makefile.static-raspbian - uses: actions/upload-artifact@v2 @@ -131,8 +122,8 @@ jobs: run: echo "$GITHUB_CONTEXT" - name: Install dependencies run: | - brew install gettext - echo >>$GITHUB_PATH /usr/local/opt/gettext/bin + brew install gettext awscli + echo "::set-env name=PATH::/usr/local/opt/gettext/bin:$PATH" - name: Versions run: | gcc --version @@ -146,7 +137,7 @@ jobs: - name: CircuitPython version run: | git describe --dirty --tags - echo >>$GITHUB_ENV CP_VERSION=$(git describe --dirty --tags) + echo "::set-env name=CP_VERSION::$(git describe --dirty --tags)" - name: Build mpy-cross run: make -C mpy-cross -j2 - uses: actions/upload-artifact@v2 @@ -180,8 +171,7 @@ jobs: - "arduino_nano_33_iot" - "arduino_zero" - "bast_pro_mini_m0" - - "bdmicro_vina_d21" - - "bdmicro_vina_d51" + - "bdmicro_vina_m0" - "bless_dev_board_multi_sensor" - "blm_badge" - "capablerobot_usbhub" @@ -199,8 +189,6 @@ jobs: - "datum_imu" - "datum_light" - "datum_weather" - - "dynossat_edu_eps" - - "dynossat_edu_obc" - "electronut_labs_blip" - "electronut_labs_papyr" - "escornabot_makech" @@ -214,7 +202,6 @@ jobs: - "feather_m0_rfm69" - "feather_m0_rfm9x" - "feather_m0_supersized" - - "feather_m4_can" - "feather_m4_express" - "feather_m7_1011" - "feather_mimxrt1011" @@ -241,13 +228,11 @@ jobs: - "makerdiary_nrf52840_m2_devkit" - "makerdiary_nrf52840_mdk" - "makerdiary_nrf52840_mdk_usb_dongle" - - "matrixportal_m4" - "meowbit_v121" - "meowmeow" - "metro_m0_express" - "metro_m4_airlift_lite" - "metro_m4_express" - - "metro_m7_1011" - "metro_nrf52840_express" - "mini_sam_m4" - "monster_m4sk" @@ -269,7 +254,6 @@ jobs: - "pca10100" - "pewpew10" - "pewpew_m4" - - "picoplanet" - "pirkey_m0" - "pitaya_go" - "pyb_nano_v2" @@ -283,8 +267,6 @@ jobs: - "pyportal" - "pyportal_titano" - "pyruler" - - "qtpy_m0" - - "qtpy_m0_haxpress" - "raytac_mdbt50q-db-40" - "robohatmm1_m4" - "sam32" @@ -419,17 +401,9 @@ jobs: fail-fast: false matrix: board: - - "adafruit_metro_esp32s2" - - "electroniccats_bastwifi" - - "espressif_kaluga_1" - "espressif_saola_1_wroom" - "espressif_saola_1_wrover" - - "microdev_micro_s2" - - "muselab_nanoesp32_s2" - - "targett_module_clip_wroom" - - "targett_module_clip_wrover" - "unexpectedmaker_feathers2" - - "unexpectedmaker_feathers2_prerelease" steps: - name: Set up Python 3.8 @@ -449,11 +423,6 @@ jobs: with: path: ${{ github.workspace }}/.idf_tools key: ${{ runner.os }}-idf-tools-${{ hashFiles('.git/modules/ports/esp32s2/esp-idf/HEAD') }}-20200801 - - name: Clone IDF submodules - run: | - (cd $IDF_PATH && git submodule update --init) - env: - IDF_PATH: ${{ github.workspace }}/ports/esp32s2/esp-idf - name: Install IDF tools run: | $IDF_PATH/tools/idf_tools.py --non-interactive install required @@ -504,4 +473,4 @@ jobs: env: AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} - if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) \ No newline at end of file + if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) -- cgit v1.2.3 From cbad75a7d2c2b997a7663f7793fe36cac82a9deb Mon Sep 17 00:00:00 2001 From: Wellington Terumi Uemura Date: Wed, 28 Oct 2020 15:40:36 +0000 Subject: Translated using Weblate (Portuguese (Brazil)) Currently translated at 100.0% (844 of 844 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pt_BR/ --- locale/pt_BR.po | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 8696d7509..7ad85e0b7 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-21 20:13-0500\n" -"PO-Revision-Date: 2020-10-27 21:01+0000\n" +"PO-Revision-Date: 2020-10-28 21:45+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -298,7 +298,7 @@ msgstr "O tipo do endereço está fora do alcance" #: ports/esp32s2/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" -msgstr "" +msgstr "Todos os periféricos CAN estão em uso" #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" @@ -426,7 +426,7 @@ msgstr "" #: ports/esp32s2/common-hal/canio/CAN.c msgid "Baudrate not supported by peripheral" -msgstr "" +msgstr "O Baudrate não é suportado pelo periférico" #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c @@ -2932,7 +2932,7 @@ msgstr "o long int não é suportado nesta compilação" #: ports/esp32s2/common-hal/canio/CAN.c msgid "loopback + silent mode not supported by peripheral" -msgstr "" +msgstr "o loopback + o modo silencioso não é suportado pelo periférico" #: py/parse.c msgid "malformed f-string" @@ -3555,12 +3555,12 @@ msgstr "a tupla/lista está com tamanho incorreto" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_driver_install returned esp-idf error #%d" -msgstr "" +msgstr "o twai_driver_install retornou um erro esp-idf #%d" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_start returned esp-idf error #%d" -msgstr "" +msgstr "o twai_start retornou um erro esp-idf #%d" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -- cgit v1.2.3 From a28755d53df963ad70cae62e526a3cb2f147851f Mon Sep 17 00:00:00 2001 From: hexthat Date: Wed, 28 Oct 2020 06:14:24 +0000 Subject: Translated using Weblate (Chinese (Pinyin)) Currently translated at 100.0% (844 of 844 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/zh_Latn/ --- locale/zh_Latn_pinyin.po | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 9b32993eb..4cc86400d 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-21 20:13-0500\n" -"PO-Revision-Date: 2020-10-22 20:48+0000\n" +"PO-Revision-Date: 2020-10-28 21:45+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -15,7 +15,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Weblate 4.3.1\n" +"X-Generator: Weblate 4.3.2-dev\n" #: main.c msgid "" @@ -296,7 +296,7 @@ msgstr "Dìzhǐ lèixíng chāochū fànwéi" #: ports/esp32s2/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" -msgstr "" +msgstr "suǒ yǒu CAN wài shè dōu zài shǐ yòng zhōng" #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" @@ -422,7 +422,7 @@ msgstr "" #: ports/esp32s2/common-hal/canio/CAN.c msgid "Baudrate not supported by peripheral" -msgstr "" +msgstr "wài shè bù zhī chí de bō tè lā tè" #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c @@ -2895,7 +2895,7 @@ msgstr "cǐ bǎnběn bù zhīchí zhǎng zhěngshù" #: ports/esp32s2/common-hal/canio/CAN.c msgid "loopback + silent mode not supported by peripheral" -msgstr "" +msgstr "Wài shè bù zhī chí huán huí + jìng yīn mó shì" #: py/parse.c msgid "malformed f-string" @@ -2933,11 +2933,11 @@ msgstr "chāochū zuìdà dìguī shēndù" #: extmod/ulab/code/approx/approx.c msgid "maxiter must be > 0" -msgstr "" +msgstr "maxiter bì xū > 0" #: extmod/ulab/code/approx/approx.c msgid "maxiter should be > 0" -msgstr "" +msgstr "maxiter yìng wéi > 0" #: py/runtime.c #, c-format @@ -3377,7 +3377,7 @@ msgstr "páixù cānshù bìxū shì ndarray" #: extmod/ulab/code/numerical/numerical.c msgid "sorted axis can't be longer than 65535" -msgstr "" +msgstr "pái xù zhóu bù néng chāo guò 65535" #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" @@ -3511,12 +3511,12 @@ msgstr "yuán zǔ/lièbiǎo chángdù cuòwù" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_driver_install returned esp-idf error #%d" -msgstr "" +msgstr "twai_driver_install fǎn huí esp-idf cuò wù #%d" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_start returned esp-idf error #%d" -msgstr "" +msgstr "twai_start fǎn huí esp -idf cuò wù #%d" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -- cgit v1.2.3 From e83be19d0f43d406c0968eb3903972cf127efb8d Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Wed, 28 Oct 2020 17:48:12 -0500 Subject: actions: Fix location of stubs upload --- .github/workflows/build.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 0792d36a0..5092e4832 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -117,7 +117,7 @@ jobs: [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-amd64-linux-${{ env.CP_VERSION }} --no-progress --region us-east-1 [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static.exe s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-x64-windows-${{ env.CP_VERSION }}.exe --no-progress --region us-east-1 zip -9 circuitpython-stubs.CP_VERSION }}.zip stubs - [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp circuitpython-stubs.zip s3://adafruit-circuit-python/bin/mpy-cross/circuitpython-stubs-${{ env.CP_VERSION }}.zip --no-progress --region us-east-1 + [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp circuitpython-stubs.zip s3://adafruit-circuit-python/bin/stubs/circuitpython-stubs-${{ env.CP_VERSION }}.zip --no-progress --region us-east-1 env: AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} -- cgit v1.2.3 From 25bad660c6cfc0c697ad02da18d9b9e8c1d9053e Mon Sep 17 00:00:00 2001 From: lady ada Date: Wed, 28 Oct 2020 19:23:18 -0400 Subject: add light sensor, move batt monitor --- ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c index 2cf3d2402..65bc3fb53 100644 --- a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c +++ b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c @@ -18,8 +18,10 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_BUTTON_C), MP_ROM_PTR(&pin_GPIO12) }, { MP_ROM_QSTR(MP_QSTR_BUTTON_D), MP_ROM_PTR(&pin_GPIO11) }, - { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO2) }, - { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO3) }, + + { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO4) }, { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO33) }, { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO34) }, -- cgit v1.2.3 From ad166ca479f405a9cb43fae9fe7b082d2e6ba19f Mon Sep 17 00:00:00 2001 From: sw23 Date: Thu, 29 Oct 2020 20:15:34 -0400 Subject: Fixing make stub warnings and mypy issuesmak --- shared-bindings/canio/CAN.c | 8 ++++---- shared-bindings/canio/Listener.c | 2 +- shared-bindings/canio/Match.c | 2 +- shared-bindings/canio/Message.c | 2 +- shared-bindings/canio/RemoteTransmissionRequest.c | 2 +- shared-bindings/displayio/Bitmap.c | 4 ++-- shared-bindings/displayio/Display.c | 2 +- shared-bindings/socketpool/Socket.c | 2 +- shared-bindings/socketpool/SocketPool.c | 2 +- shared-bindings/ssl/SSLContext.c | 2 +- shared-bindings/wifi/Radio.c | 4 ++-- tools/extract_pyi.py | 9 ++++++++- 12 files changed, 24 insertions(+), 17 deletions(-) diff --git a/shared-bindings/canio/CAN.c b/shared-bindings/canio/CAN.c index 4982a97b9..13066764e 100644 --- a/shared-bindings/canio/CAN.c +++ b/shared-bindings/canio/CAN.c @@ -49,7 +49,7 @@ //| loopback: bool = False, //| silent: bool = False, //| auto_restart: bool = False, -//| ): +//| ) -> None: //| """A common shared-bus protocol. The rx and tx pins are generally //| connected to a transceiver which controls the H and L pins on a //| shared bus. @@ -171,7 +171,7 @@ STATIC const mp_obj_property_t canio_can_receive_error_count_obj = { (mp_obj_t)mp_const_none}, }; -//| state: State +//| state: BusState //| """The current state of the bus. (read-only)""" STATIC mp_obj_t canio_can_state_get(mp_obj_t self_in) { canio_can_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -291,7 +291,7 @@ STATIC const mp_obj_property_t canio_can_loopback_obj = { }; -//| def send(message: Union[RemoteTransmissionRequest, Message]) -> None: +//| def send(self, message: Union[RemoteTransmissionRequest, Message]) -> None: //| """Send a message on the bus with the given data and id. //| If the message could not be sent due to a full fifo or a bus error condition, RuntimeError is raised. //| """ @@ -352,7 +352,7 @@ STATIC mp_obj_t canio_can_enter(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(canio_can_enter_obj, canio_can_enter); -//| def __exit__(self, unused1, unused2, unused3) -> None: +//| def __exit__(self, unused1: Optional[Type[BaseException]], unused2: Optional[BaseException], unused3: Optional[TracebackType]) -> None: //| """Calls deinit()""" //| ... STATIC mp_obj_t canio_can_exit(size_t num_args, const mp_obj_t args[]) { diff --git a/shared-bindings/canio/Listener.c b/shared-bindings/canio/Listener.c index 93552af81..8a39f0f2a 100644 --- a/shared-bindings/canio/Listener.c +++ b/shared-bindings/canio/Listener.c @@ -123,7 +123,7 @@ STATIC mp_obj_t canio_listener_enter(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(canio_listener_enter_obj, canio_listener_enter); -//| def __exit__(self, unused1, unused2, unused3) -> None: +//| def __exit__(self, unused1: Optional[Type[BaseException]], unused2: Optional[BaseException], unused3: Optional[TracebackType]) -> None: //| """Calls deinit()""" //| ... STATIC mp_obj_t canio_listener_exit(size_t num_args, const mp_obj_t args[]) { diff --git a/shared-bindings/canio/Match.c b/shared-bindings/canio/Match.c index 3fbc1773e..6039631fa 100644 --- a/shared-bindings/canio/Match.c +++ b/shared-bindings/canio/Match.c @@ -33,7 +33,7 @@ //| """Describe CAN bus messages to match""" //| //| -//| def __init__(self, id: int, *, mask: Optional[int] = None, extended: bool = False): +//| def __init__(self, id: int, *, mask: Optional[int] = None, extended: bool = False) -> None: //| """Construct a Match with the given properties. //| //| If mask is not None, then the filter is for any id which matches all diff --git a/shared-bindings/canio/Message.c b/shared-bindings/canio/Message.c index e47e997c7..04fa8fc6c 100644 --- a/shared-bindings/canio/Message.c +++ b/shared-bindings/canio/Message.c @@ -31,7 +31,7 @@ #include "py/runtime.h" //| class Message: -//| def __init__(self, id: int, data: bytes, *, extended: bool = False): +//| def __init__(self, id: int, data: bytes, *, extended: bool = False) -> None: //| """Construct a Message to send on a CAN bus. //| //| :param int id: The numeric ID of the message diff --git a/shared-bindings/canio/RemoteTransmissionRequest.c b/shared-bindings/canio/RemoteTransmissionRequest.c index d762787b1..fcd259034 100644 --- a/shared-bindings/canio/RemoteTransmissionRequest.c +++ b/shared-bindings/canio/RemoteTransmissionRequest.c @@ -31,7 +31,7 @@ #include "py/runtime.h" //| class RemoteTransmissionRequest: -//| def __init__(self, id: int, length: int, *, extended: bool = False): +//| def __init__(self, id: int, length: int, *, extended: bool = False) -> None: //| """Construct a RemoteTransmissionRequest to send on a CAN bus. //| //| :param int id: The numeric ID of the requested message diff --git a/shared-bindings/displayio/Bitmap.c b/shared-bindings/displayio/Bitmap.c index 5a2fc785f..b9f06fe14 100644 --- a/shared-bindings/displayio/Bitmap.c +++ b/shared-bindings/displayio/Bitmap.c @@ -172,7 +172,7 @@ STATIC mp_obj_t bitmap_subscr(mp_obj_t self_in, mp_obj_t index_obj, mp_obj_t val return mp_const_none; } -//| def blit(self, x: int, y: int, source_bitmap: bitmap, *, x1: int, y1: int, x2: int, y2: int, skip_index: int) -> None: +//| def blit(self, x: int, y: int, source_bitmap: Bitmap, *, x1: int, y1: int, x2: int, y2: int, skip_index: int) -> None: //| """Inserts the source_bitmap region defined by rectangular boundaries //| (x1,y1) and (x2,y2) into the bitmap at the specified (x,y) location. //| @@ -274,7 +274,7 @@ STATIC mp_obj_t displayio_bitmap_obj_blit(size_t n_args, const mp_obj_t *pos_arg MP_DEFINE_CONST_FUN_OBJ_KW(displayio_bitmap_blit_obj, 4, displayio_bitmap_obj_blit); // `displayio_bitmap_obj_blit` requires at least 4 arguments -//| def fill(self, value: Any) -> None: +//| def fill(self, value: int) -> None: //| """Fills the bitmap with the supplied palette index value.""" //| ... //| diff --git a/shared-bindings/displayio/Display.c b/shared-bindings/displayio/Display.c index e78a893b0..1ed59f233 100644 --- a/shared-bindings/displayio/Display.c +++ b/shared-bindings/displayio/Display.c @@ -39,7 +39,7 @@ #include "shared-module/displayio/__init__.h" #include "supervisor/shared/translate.h" -//| _DisplayBus = Union[FourWire, ParallelBus, I2CDisplay] +//| _DisplayBus = Union['FourWire', 'ParallelBus', 'I2CDisplay'] //| """:py:class:`FourWire`, :py:class:`ParallelBus` or :py:class:`I2CDisplay`""" //| diff --git a/shared-bindings/socketpool/Socket.c b/shared-bindings/socketpool/Socket.c index e7b31842d..362e4d7e8 100644 --- a/shared-bindings/socketpool/Socket.c +++ b/shared-bindings/socketpool/Socket.c @@ -161,7 +161,7 @@ STATIC mp_obj_t socketpool_socket_close(mp_obj_t self_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_1(socketpool_socket_close_obj, socketpool_socket_close); -//| def connect(self, address: tuple) -> None: +//| def connect(self, address: Tuple[str, int]) -> None: //| """Connect a socket to a remote address //| //| :param ~tuple address: tuple of (remote_address, remote_port)""" diff --git a/shared-bindings/socketpool/SocketPool.c b/shared-bindings/socketpool/SocketPool.c index 527cf7e98..b737b5fc2 100644 --- a/shared-bindings/socketpool/SocketPool.c +++ b/shared-bindings/socketpool/SocketPool.c @@ -82,7 +82,7 @@ STATIC mp_obj_t socketpool_socketpool_socket(size_t n_args, const mp_obj_t *pos_ } MP_DEFINE_CONST_FUN_OBJ_KW(socketpool_socketpool_socket_obj, 1, socketpool_socketpool_socket); -//| def getaddrinfo(host: str, port: int, family: int = 0, type: int = 0, proto: int = 0, flags: int = 0) -> tuple: +//| def getaddrinfo(host: str, port: int, family: int = 0, type: int = 0, proto: int = 0, flags: int = 0) -> Tuple[int, int, int, str, Tuple[str, int]]: //| """Gets the address information for a hostname and port //| //| Returns the appropriate family, socket type, socket protocol and diff --git a/shared-bindings/ssl/SSLContext.c b/shared-bindings/ssl/SSLContext.c index d2c236d3b..9d4df7261 100644 --- a/shared-bindings/ssl/SSLContext.c +++ b/shared-bindings/ssl/SSLContext.c @@ -51,7 +51,7 @@ STATIC mp_obj_t ssl_sslcontext_make_new(const mp_obj_type_t *type, size_t n_args return MP_OBJ_FROM_PTR(s); } -//| def wrap_socket(sock: socketpool.Socket, *, server_side: bool = False, server_hostname: str = None) -> socketpool.Socket: +//| def wrap_socket(sock: socketpool.Socket, *, server_side: bool = False, server_hostname: Optional[str] = None) -> socketpool.Socket: //| """Wraps the socket into a socket-compatible class that handles SSL negotiation. //| The socket must be of type SOCK_STREAM.""" //| ... diff --git a/shared-bindings/wifi/Radio.c b/shared-bindings/wifi/Radio.c index a274c437e..a56ca5aaa 100644 --- a/shared-bindings/wifi/Radio.c +++ b/shared-bindings/wifi/Radio.c @@ -79,7 +79,7 @@ const mp_obj_property_t wifi_radio_mac_address_obj = { }; -//| def start_scanning_networks(self, *, start_channel=1, stop_channel=11) -> Iterable[Network]: +//| def start_scanning_networks(self, *, start_channel: int = 1, stop_channel: int = 11) -> Iterable[Network]: //| """Scans for available wifi networks over the given channel range. Make sure the channels are allowed in your country.""" //| ... //| @@ -283,7 +283,7 @@ const mp_obj_property_t wifi_radio_ap_info_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| def ping(self, ip, *, timeout: float = 0.5) -> float: +//| def ping(self, ip: wifi.Radio, *, timeout: float = 0.5) -> float: //| """Ping an IP to test connectivity. Returns echo time in seconds. //| Returns None when it times out.""" //| ... diff --git a/tools/extract_pyi.py b/tools/extract_pyi.py index 651216e11..b7ce584a1 100644 --- a/tools/extract_pyi.py +++ b/tools/extract_pyi.py @@ -17,7 +17,8 @@ import black IMPORTS_IGNORE = frozenset({'int', 'float', 'bool', 'str', 'bytes', 'tuple', 'list', 'set', 'dict', 'bytearray', 'slice', 'file', 'buffer', 'range', 'array', 'struct_time'}) -IMPORTS_TYPING = frozenset({'Any', 'Optional', 'Union', 'Tuple', 'List', 'Sequence', 'NamedTuple', 'Iterable', 'Iterator', 'Callable', 'AnyStr', 'overload'}) +IMPORTS_TYPING = frozenset({'Any', 'Optional', 'Union', 'Tuple', 'List', 'Sequence', 'NamedTuple', 'Iterable', 'Iterator', 'Callable', 'AnyStr', 'overload', 'Type'}) +IMPORTS_TYPES = frozenset({'TracebackType'}) CPY_TYPING = frozenset({'ReadableBuffer', 'WriteableBuffer', 'AudioSample', 'FrameBuffer'}) @@ -63,6 +64,7 @@ def find_stub_issues(tree): def extract_imports(tree): modules = set() typing = set() + types = set() cpy_typing = set() def collect_annotations(anno_tree): @@ -74,6 +76,8 @@ def extract_imports(tree): continue elif node.id in IMPORTS_TYPING: typing.add(node.id) + elif node.id in IMPORTS_TYPES: + types.add(node.id) elif node.id in CPY_TYPING: cpy_typing.add(node.id) elif isinstance(node, ast.Attribute): @@ -94,6 +98,7 @@ def extract_imports(tree): return { "modules": sorted(modules), "typing": sorted(typing), + "types": sorted(types), "cpy_typing": sorted(cpy_typing), } @@ -181,6 +186,8 @@ def convert_folder(top_level, stub_directory): # Add import statements imports = extract_imports(tree) import_lines = ["from __future__ import annotations"] + if imports["types"]: + import_lines.append("from types import " + ", ".join(imports["types"])) if imports["typing"]: import_lines.append("from typing import " + ", ".join(imports["typing"])) if imports["cpy_typing"]: -- cgit v1.2.3 From 9f3a1fe27b9f29771b87a4d5eb1914075d2b1e3a Mon Sep 17 00:00:00 2001 From: sw23 Date: Fri, 30 Oct 2020 01:29:58 -0400 Subject: Fixing stub for wifi_radio_ping --- shared-bindings/wifi/Radio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/shared-bindings/wifi/Radio.c b/shared-bindings/wifi/Radio.c index a56ca5aaa..e81e8793c 100644 --- a/shared-bindings/wifi/Radio.c +++ b/shared-bindings/wifi/Radio.c @@ -283,7 +283,7 @@ const mp_obj_property_t wifi_radio_ap_info_obj = { (mp_obj_t)&mp_const_none_obj }, }; -//| def ping(self, ip: wifi.Radio, *, timeout: float = 0.5) -> float: +//| def ping(self, ip: ipaddress.IPv4Address, *, timeout: Optional[float] = 0.5) -> float: //| """Ping an IP to test connectivity. Returns echo time in seconds. //| Returns None when it times out.""" //| ... -- cgit v1.2.3 From 6a63d20a5d2e7184bfc5747b465818fb7eee6b49 Mon Sep 17 00:00:00 2001 From: sw23 Date: Fri, 30 Oct 2020 18:56:40 -0400 Subject: Fixing remaining stub mypy issues + run check-stubs to CI --- .github/workflows/build.yml | 2 +- shared-bindings/ipaddress/IPv4Address.c | 2 +- shared-bindings/socketpool/SocketPool.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 64d43f4d9..8039883e3 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -68,7 +68,7 @@ jobs: run: MICROPY_CPYTHON3=python3.8 MICROPY_MICROPYTHON=../ports/unix/micropython_coverage ./run-tests -j1 --via-mpy -d basics float working-directory: tests - name: Stubs - run: make stubs -j2 + run: make check-stubs -j2 - uses: actions/upload-artifact@v2 with: name: stubs diff --git a/shared-bindings/ipaddress/IPv4Address.c b/shared-bindings/ipaddress/IPv4Address.c index b2a10158a..e027f32d6 100644 --- a/shared-bindings/ipaddress/IPv4Address.c +++ b/shared-bindings/ipaddress/IPv4Address.c @@ -126,7 +126,7 @@ const mp_obj_property_t ipaddress_ipv4address_version_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| def __eq__(self, other: IPv4Address) -> bool: +//| def __eq__(self, other: object) -> bool: //| """Two Address objects are equal if their addresses and address types are equal.""" //| ... //| diff --git a/shared-bindings/socketpool/SocketPool.c b/shared-bindings/socketpool/SocketPool.c index b737b5fc2..0cead525f 100644 --- a/shared-bindings/socketpool/SocketPool.c +++ b/shared-bindings/socketpool/SocketPool.c @@ -58,7 +58,7 @@ STATIC mp_obj_t socketpool_socketpool_make_new(const mp_obj_type_t *type, size_t } -//| def socket(self, family: int = AF_INET, type: int = SOCK_STREAM, proto: int = IPPROTO_TCP) -> None: +//| def socket(self, family: int, type: int, proto: int) -> socketpool.Socket: //| """Create a new socket //| //| :param ~int family: AF_INET or AF_INET6 -- cgit v1.2.3 From 8e72b68e3de90f87261ce289dd7d3a28815cfd0b Mon Sep 17 00:00:00 2001 From: sw23 Date: Fri, 30 Oct 2020 19:16:26 -0400 Subject: Adding mypy to dep list and clarifying Stubs stage name --- .github/workflows/build.yml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 8039883e3..07db88963 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -37,7 +37,7 @@ jobs: run: | sudo apt-get install -y eatmydata sudo eatmydata apt-get install -y gettext librsvg2-bin mingw-w64 latexmk texlive-fonts-recommended texlive-latex-recommended texlive-latex-extra - pip install requests sh click setuptools cpp-coveralls "Sphinx<4" sphinx-rtd-theme recommonmark sphinx-autoapi sphinxcontrib-svg2pdfconverter polib pyyaml astroid isort black awscli + pip install requests sh click setuptools cpp-coveralls "Sphinx<4" sphinx-rtd-theme recommonmark sphinx-autoapi sphinxcontrib-svg2pdfconverter polib pyyaml astroid isort black awscli mypy - name: Versions run: | gcc --version @@ -67,7 +67,7 @@ jobs: - name: mpy Tests run: MICROPY_CPYTHON3=python3.8 MICROPY_MICROPYTHON=../ports/unix/micropython_coverage ./run-tests -j1 --via-mpy -d basics float working-directory: tests - - name: Stubs + - name: Build and Validate Stubs run: make check-stubs -j2 - uses: actions/upload-artifact@v2 with: -- cgit v1.2.3 From 1f179b331750fbe05ccb4caff44e985234c9ee71 Mon Sep 17 00:00:00 2001 From: sw23 Date: Fri, 30 Oct 2020 23:19:27 -0400 Subject: Adding socket and socketpool class attributes --- shared-bindings/socket/__init__.c | 15 ++++++++------- shared-bindings/socketpool/SocketPool.c | 11 +++++++++-- 2 files changed, 17 insertions(+), 9 deletions(-) diff --git a/shared-bindings/socket/__init__.c b/shared-bindings/socket/__init__.c index 38840da5e..2969b3714 100644 --- a/shared-bindings/socket/__init__.c +++ b/shared-bindings/socket/__init__.c @@ -49,7 +49,14 @@ STATIC const mp_obj_type_t socket_type; //| class socket: //| -//| def __init__(self, family: int, type: int, proto: int) -> None: +//| AF_INET = 2 +//| AF_INET6 = 10 +//| SOCK_STREAM = 1 +//| SOCK_DGRAM = 2 +//| SOCK_RAW = 3 +//| IPPROTO_TCP = 6 +//| +//| def __init__(self, family: int = AF_INET, type: int = SOCK_STREAM, proto: int = IPPROTO_TCP) -> None: //| """Create a new socket //| //| :param int family: AF_INET or AF_INET6 @@ -57,12 +64,6 @@ STATIC const mp_obj_type_t socket_type; //| :param int proto: IPPROTO_TCP, IPPROTO_UDP or IPPROTO_RAW (ignored)""" //| ... //| -//| AF_INET: int -//| AF_INET6: int -//| SOCK_STREAM: int -//| SOCK_DGRAM: int -//| SOCK_RAW: int -//| STATIC mp_obj_t socket_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 0, 4, false); diff --git a/shared-bindings/socketpool/SocketPool.c b/shared-bindings/socketpool/SocketPool.c index 0cead525f..2234f359e 100644 --- a/shared-bindings/socketpool/SocketPool.c +++ b/shared-bindings/socketpool/SocketPool.c @@ -57,8 +57,14 @@ STATIC mp_obj_t socketpool_socketpool_make_new(const mp_obj_type_t *type, size_t return MP_OBJ_FROM_PTR(s); } - -//| def socket(self, family: int, type: int, proto: int) -> socketpool.Socket: +//| AF_INET = 0 +//| AF_INET6 = 1 +//| SOCK_STREAM = 0 +//| SOCK_DGRAM = 1 +//| SOCK_RAW = 2 +//| IPPROTO_TCP = 6 +//| +//| def socket(self, family: int = AF_INET, type: int = SOCK_STREAM, proto: int = IPPROTO_TCP) -> socketpool.Socket: //| """Create a new socket //| //| :param ~int family: AF_INET or AF_INET6 @@ -66,6 +72,7 @@ STATIC mp_obj_t socketpool_socketpool_make_new(const mp_obj_type_t *type, size_t //| :param ~int proto: IPPROTO_TCP, IPPROTO_UDP or IPPROTO_RAW (ignored)""" //| ... //| + STATIC mp_obj_t socketpool_socketpool_socket(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { mp_arg_check_num(n_args, kw_args, 0, 5, false); -- cgit v1.2.3 From a7616808e951b52e2ced08a7a279a224490ae404 Mon Sep 17 00:00:00 2001 From: "ITACA Innovation S.R.L" <40298126+ITACAInnovation@users.noreply.github.com> Date: Sat, 31 Oct 2020 10:12:49 +0100 Subject: Updated pinout --- ports/atmel-samd/boards/uchip/pins.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/ports/atmel-samd/boards/uchip/pins.c b/ports/atmel-samd/boards/uchip/pins.c index 856a22074..cfb643233 100644 --- a/ports/atmel-samd/boards/uchip/pins.c +++ b/ports/atmel-samd/boards/uchip/pins.c @@ -1,14 +1,15 @@ #include "shared-bindings/board/__init__.h" STATIC const mp_rom_map_elem_t board_global_dict_table[] = { - { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA08) }, - { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA10) }, - { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA09) }, - { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA11) }, - { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA02) }, - { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA04) }, - { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PA03) }, - { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PA03) }, + { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PA04) }, { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA16) }, { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA08) }, { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA10) }, @@ -19,8 +20,10 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA19) }, { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA22) }, { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA23) }, - { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_PA03) }, - { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA31) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA30) }, + { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_PA03) }, { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA09) }, { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA08) }, { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA22) }, -- cgit v1.2.3 From 9a8484b853116e6f95f50da6d3bc66323d55ca9f Mon Sep 17 00:00:00 2001 From: "ITACA Innovation S.R.L" <40298126+ITACAInnovation@users.noreply.github.com> Date: Sat, 31 Oct 2020 11:06:56 +0100 Subject: Update mpconfigboard.h Removed ignore PA30 PA31 in order to allow using them as pinout --- ports/atmel-samd/boards/uchip/mpconfigboard.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/ports/atmel-samd/boards/uchip/mpconfigboard.h b/ports/atmel-samd/boards/uchip/mpconfigboard.h index 1877a41ef..5d6af4b78 100644 --- a/ports/atmel-samd/boards/uchip/mpconfigboard.h +++ b/ports/atmel-samd/boards/uchip/mpconfigboard.h @@ -16,8 +16,6 @@ #define IGNORE_PIN_PA27 1 #define IGNORE_PIN_PA28 1 -#define IGNORE_PIN_PA30 1 -#define IGNORE_PIN_PA31 1 #define IGNORE_PIN_PB01 1 #define IGNORE_PIN_PB02 1 -- cgit v1.2.3 From 80ad300cad64a7da77d9292dbe5d2b81e458d5dc Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Sat, 31 Oct 2020 11:58:28 -0500 Subject: workflows: Fix typo that broke builds while trying to upload stubs --- .github/workflows/build.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 64d43f4d9..00db4f8cd 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -116,7 +116,7 @@ jobs: [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static-raspbian s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-raspbian-${{ env.CP_VERSION }} --no-progress --region us-east-1 [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-amd64-linux-${{ env.CP_VERSION }} --no-progress --region us-east-1 [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static.exe s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-x64-windows-${{ env.CP_VERSION }}.exe --no-progress --region us-east-1 - zip -9 circuitpython-stubs.CP_VERSION }}.zip stubs + zip -9 circuitpython-stubs.${{ env.CP_VERSION }}.zip stubs [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp circuitpython-stubs.zip s3://adafruit-circuit-python/bin/stubs/circuitpython-stubs-${{ env.CP_VERSION }}.zip --no-progress --region us-east-1 env: AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} -- cgit v1.2.3 From 0c30a26c9bcdfe537262d4ad3ea62b7eaba0c7b8 Mon Sep 17 00:00:00 2001 From: Dan Halbert Date: Sat, 31 Oct 2020 13:19:13 -0400 Subject: Update .github/workflows/build.yml --- .github/workflows/build.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 00db4f8cd..36bf136d4 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -116,7 +116,7 @@ jobs: [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static-raspbian s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-raspbian-${{ env.CP_VERSION }} --no-progress --region us-east-1 [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-amd64-linux-${{ env.CP_VERSION }} --no-progress --region us-east-1 [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static.exe s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-x64-windows-${{ env.CP_VERSION }}.exe --no-progress --region us-east-1 - zip -9 circuitpython-stubs.${{ env.CP_VERSION }}.zip stubs + zip -9 circuitpython-stubs.zip stubs [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp circuitpython-stubs.zip s3://adafruit-circuit-python/bin/stubs/circuitpython-stubs-${{ env.CP_VERSION }}.zip --no-progress --region us-east-1 env: AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} -- cgit v1.2.3 From 073dc8751c92d943897db9e68b617fe7ba358f00 Mon Sep 17 00:00:00 2001 From: Dan Halbert Date: Sat, 31 Oct 2020 14:50:13 -0400 Subject: Use correct stubs directory name The stubs directory is called `circuitpython-stubs`, not `stubs`. --- .github/workflows/build.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 36bf136d4..514fa82da 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -116,7 +116,7 @@ jobs: [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static-raspbian s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-raspbian-${{ env.CP_VERSION }} --no-progress --region us-east-1 [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-amd64-linux-${{ env.CP_VERSION }} --no-progress --region us-east-1 [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static.exe s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-x64-windows-${{ env.CP_VERSION }}.exe --no-progress --region us-east-1 - zip -9 circuitpython-stubs.zip stubs + zip -9 circuitpython-stubs.zip circuitpython-stubs [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp circuitpython-stubs.zip s3://adafruit-circuit-python/bin/stubs/circuitpython-stubs-${{ env.CP_VERSION }}.zip --no-progress --region us-east-1 env: AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} -- cgit v1.2.3 From 3845db4bb98dbfa0b35b11baaa5d62f9f4266dea Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Sat, 31 Oct 2020 20:13:51 -0500 Subject: Update build.yml Need to request zip to recurse, because it is not the default --- .github/workflows/build.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 514fa82da..b6c80558e 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -116,7 +116,7 @@ jobs: [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static-raspbian s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-raspbian-${{ env.CP_VERSION }} --no-progress --region us-east-1 [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-amd64-linux-${{ env.CP_VERSION }} --no-progress --region us-east-1 [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross.static.exe s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross.static-x64-windows-${{ env.CP_VERSION }}.exe --no-progress --region us-east-1 - zip -9 circuitpython-stubs.zip circuitpython-stubs + zip -9r circuitpython-stubs.zip circuitpython-stubs [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp circuitpython-stubs.zip s3://adafruit-circuit-python/bin/stubs/circuitpython-stubs-${{ env.CP_VERSION }}.zip --no-progress --region us-east-1 env: AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} -- cgit v1.2.3 From 4438050f794edea5c6a3f919964908800dd6b522 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Sun, 1 Nov 2020 18:00:07 +0530 Subject: Add pcnt handler --- locale/circuitpython.pot | 9 +++- ports/esp32s2/Makefile | 1 + ports/esp32s2/common-hal/countio/Counter.c | 70 +++++++++++++++++------------- ports/esp32s2/common-hal/countio/Counter.h | 31 +++++++++++-- ports/esp32s2/pcnt_handler.c | 67 ++++++++++++++++++++++++++++ ports/esp32s2/pcnt_handler.h | 35 +++++++++++++++ 6 files changed, 177 insertions(+), 36 deletions(-) create mode 100644 ports/esp32s2/pcnt_handler.c create mode 100644 ports/esp32s2/pcnt_handler.h diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 16c3dd973..1336ab25c 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-01 11:11+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1109,7 +1109,8 @@ msgid "Invalid phase" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "" @@ -1271,6 +1272,10 @@ msgstr "" msgid "No MOSI Pin" msgstr "" +#: ports/esp32s2/pcnt_handler.c +msgid "No PCNT unit free" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c diff --git a/ports/esp32s2/Makefile b/ports/esp32s2/Makefile index 8d891edd0..6dbbf58d4 100644 --- a/ports/esp32s2/Makefile +++ b/ports/esp32s2/Makefile @@ -173,6 +173,7 @@ SRC_C += \ background.c \ fatfs_port.c \ mphalport.c \ + pcnt_handler.c \ bindings/espidf/__init__.c \ boards/$(BOARD)/board.c \ boards/$(BOARD)/pins.c \ diff --git a/ports/esp32s2/common-hal/countio/Counter.c b/ports/esp32s2/common-hal/countio/Counter.c index 6a76a163d..435762473 100644 --- a/ports/esp32s2/common-hal/countio/Counter.c +++ b/ports/esp32s2/common-hal/countio/Counter.c @@ -1,67 +1,75 @@ -#include "common-hal/countio/Counter.h" +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ -#include "py/runtime.h" -#include "supervisor/shared/translate.h" +#include "common-hal/countio/Counter.h" +#include "common-hal/microcontroller/Pin.h" -#include "driver/pcnt.h" +void common_hal_countio_counter_construct(countio_counter_obj_t* self, + const mcu_pin_obj_t* pin) { + claim_pin(pin); -static void pcnt_init(countio_counter_obj_t* self) { - int unit = PCNT_UNIT_0; // Prepare configuration for the PCNT unit pcnt_config_t pcnt_config = { // Set PCNT input signal and control GPIOs - .pulse_gpio_num = self->pin->number, + .pulse_gpio_num = pin->number, .ctrl_gpio_num = PCNT_PIN_NOT_USED, .channel = PCNT_CHANNEL_0, - .unit = unit, // What to do on the positive / negative edge of pulse input? .pos_mode = PCNT_COUNT_INC, // Count up on the positive edge .neg_mode = PCNT_COUNT_DIS, // Keep the counter value on the negative edge }; // Initialize PCNT unit - pcnt_unit_config(&pcnt_config); - - // Configure and enable the input filter - pcnt_set_filter_value(unit, 100); - pcnt_filter_enable(unit); + pcnt_handler_init(&pcnt_config); - // Initialize PCNT's counter - pcnt_counter_pause(unit); - pcnt_counter_clear(unit); - - // Everything is set up, now go to counting - pcnt_counter_resume(unit); -} - -void common_hal_countio_counter_construct(countio_counter_obj_t* self, - const mcu_pin_obj_t* pin) { - claim_pin(pin); - self->pin = pin; - pcnt_init(self); + self->pin = pin->number; + self->unit = pcnt_config.unit; } bool common_hal_countio_counter_deinited(countio_counter_obj_t* self) { - return self->pin == NULL; + return self->unit == PCNT_UNIT_MAX; } void common_hal_countio_counter_deinit(countio_counter_obj_t* self) { if (common_hal_countio_counter_deinited(self)) { return; } - reset_pin_number(self->pin->number); - self->pin = NULL; + reset_pin_number(self->pin); + pcnt_handler_deinit(&self->unit); } mp_int_t common_hal_countio_counter_get_count(countio_counter_obj_t* self) { int16_t count; - pcnt_get_counter_value(PCNT_UNIT_0, &count); + pcnt_get_counter_value(self->unit, &count); return count+self->count; } void common_hal_countio_counter_set_count(countio_counter_obj_t* self, mp_int_t new_count) { self->count = new_count; - pcnt_counter_clear(PCNT_UNIT_0); + pcnt_counter_clear(self->unit); } void common_hal_countio_counter_reset(countio_counter_obj_t* self) { diff --git a/ports/esp32s2/common-hal/countio/Counter.h b/ports/esp32s2/common-hal/countio/Counter.h index 3406f9daa..63d1eb98b 100644 --- a/ports/esp32s2/common-hal/countio/Counter.h +++ b/ports/esp32s2/common-hal/countio/Counter.h @@ -1,15 +1,40 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ #ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNTER_H #define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNTER_H -#include "common-hal/microcontroller/Pin.h" - #include "py/obj.h" +#include "pcnt_handler.h" typedef struct { mp_obj_base_t base; - const mcu_pin_obj_t * pin; + uint8_t pin; mp_int_t count; + pcnt_unit_t unit; } countio_counter_obj_t; #endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNT_H diff --git a/ports/esp32s2/pcnt_handler.c b/ports/esp32s2/pcnt_handler.c new file mode 100644 index 000000000..56fb0f21c --- /dev/null +++ b/ports/esp32s2/pcnt_handler.c @@ -0,0 +1,67 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "pcnt_handler.h" + +#include "py/runtime.h" +#include "supervisor/shared/translate.h" + +#define PCNT_UNIT_ACTIVE 1 +#define PCNT_UNIT_INACTIVE 0 + +static uint8_t pcnt_state[4]; + +void pcnt_handler_init(pcnt_config_t* pcnt_config) { + // Look for available pcnt unit + for (uint8_t i = 0; i<=3; i++) { + if (pcnt_state[i] == PCNT_UNIT_INACTIVE) { + pcnt_config->unit = (pcnt_unit_t)i; + pcnt_state[i] = PCNT_UNIT_ACTIVE; + break; + } else if (i == 3) { + mp_raise_RuntimeError(translate("No PCNT unit free")); + } + } + + // Initialize PCNT unit + pcnt_unit_config(pcnt_config); + + // Configure and enable the input filter + pcnt_set_filter_value(pcnt_config->unit, 100); + pcnt_filter_enable(pcnt_config->unit); + + // Initialize PCNT's counter + pcnt_counter_pause(pcnt_config->unit); + pcnt_counter_clear(pcnt_config->unit); + + // Everything is set up, now go to counting + pcnt_counter_resume(pcnt_config->unit); +} + +void pcnt_handler_deinit(pcnt_unit_t* unit) { + pcnt_state[*unit] = PCNT_UNIT_INACTIVE; + *unit = PCNT_UNIT_MAX; +} diff --git a/ports/esp32s2/pcnt_handler.h b/ports/esp32s2/pcnt_handler.h new file mode 100644 index 000000000..4bdaee1b8 --- /dev/null +++ b/ports/esp32s2/pcnt_handler.h @@ -0,0 +1,35 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_PCNT_HANDLER_H +#define MICROPY_INCLUDED_ESP32S2_PCNT_HANDLER_H + +#include "driver/pcnt.h" + +extern void pcnt_handler_init(pcnt_config_t* pcnt_config); +extern void pcnt_handler_deinit(pcnt_unit_t* unit); + +#endif // MICROPY_INCLUDED_ESP32S2_PCNT_HANDLER_H -- cgit v1.2.3 From 856a6d4558d594e690a9e39ba841ef086c37ed9f Mon Sep 17 00:00:00 2001 From: Alvaro Figueroa Date: Sat, 31 Oct 2020 15:51:35 +0000 Subject: Translated using Weblate (Spanish) Currently translated at 99.2% (838 of 844 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/es/ --- locale/es.po | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/locale/es.po b/locale/es.po index 348af3406..a750c8055 100644 --- a/locale/es.po +++ b/locale/es.po @@ -8,8 +8,8 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-21 20:13-0500\n" -"PO-Revision-Date: 2020-10-27 21:01+0000\n" -"Last-Translator: Adolfo Jayme Barrientos \n" +"PO-Revision-Date: 2020-11-01 16:26+0000\n" +"Last-Translator: Alvaro Figueroa \n" "Language-Team: \n" "Language: es\n" "MIME-Version: 1.0\n" @@ -297,7 +297,7 @@ msgstr "Tipo de dirección fuera de rango" #: ports/esp32s2/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" -msgstr "" +msgstr "Todos los periféricos CAN están en uso" #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" @@ -427,7 +427,7 @@ msgstr "" #: ports/esp32s2/common-hal/canio/CAN.c msgid "Baudrate not supported by peripheral" -msgstr "" +msgstr "El periférico no maneja el Baudrate" #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c -- cgit v1.2.3 From 7a07e8fa32de376c2f523b6c7d13e1b473198423 Mon Sep 17 00:00:00 2001 From: Jonny Bergdahl Date: Fri, 30 Oct 2020 21:04:56 +0000 Subject: Translated using Weblate (Swedish) Currently translated at 100.0% (844 of 844 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/sv/ --- locale/sv.po | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/locale/sv.po b/locale/sv.po index 53ed60aca..65cd9f6f1 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-21 20:13-0500\n" -"PO-Revision-Date: 2020-10-26 02:36+0000\n" +"PO-Revision-Date: 2020-11-01 16:26+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" "Language: sv\n" @@ -294,7 +294,7 @@ msgstr "Adresstyp utanför intervallet" #: ports/esp32s2/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" -msgstr "" +msgstr "All I2C-kringutrustning används" #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" @@ -420,7 +420,7 @@ msgstr "" #: ports/esp32s2/common-hal/canio/CAN.c msgid "Baudrate not supported by peripheral" -msgstr "" +msgstr "Baudrate stöds inte av kringutrustning" #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c @@ -2905,7 +2905,7 @@ msgstr "long int stöds inte i denna build" #: ports/esp32s2/common-hal/canio/CAN.c msgid "loopback + silent mode not supported by peripheral" -msgstr "" +msgstr "loopback + tyst läge stöds inte av kringutrustning" #: py/parse.c msgid "malformed f-string" @@ -2943,11 +2943,11 @@ msgstr "maximal rekursionsdjup överskriden" #: extmod/ulab/code/approx/approx.c msgid "maxiter must be > 0" -msgstr "" +msgstr "maxiter måste vara > 0" #: extmod/ulab/code/approx/approx.c msgid "maxiter should be > 0" -msgstr "" +msgstr "maxiter bör vara > 0" #: py/runtime.c #, c-format @@ -3388,7 +3388,7 @@ msgstr "argumentet sort måste vara en ndarray" #: extmod/ulab/code/numerical/numerical.c msgid "sorted axis can't be longer than 65535" -msgstr "" +msgstr "sorterad axel kan inte vara längre än 65535" #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" @@ -3522,12 +3522,12 @@ msgstr "tupel/lista har fel längd" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_driver_install returned esp-idf error #%d" -msgstr "" +msgstr "twai_driver_install returnerade esp-idf-fel #%d" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_start returned esp-idf error #%d" -msgstr "" +msgstr "twai_start returnerade esp-idf-fel #%d" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -- cgit v1.2.3 From 72b829dff02cb9b8ebe6e2b47354f06650dbe864 Mon Sep 17 00:00:00 2001 From: Dan Halbert Date: Sun, 1 Nov 2020 14:52:03 -0500 Subject: add binascii to most builds --- ports/atmel-samd/mpconfigport.h | 1 + py/circuitpy_mpconfig.h | 10 ++++++++++ py/objmodule.c | 7 ++++++- 3 files changed, 17 insertions(+), 1 deletion(-) diff --git a/ports/atmel-samd/mpconfigport.h b/ports/atmel-samd/mpconfigport.h index f7ccff4da..ed10da9b9 100644 --- a/ports/atmel-samd/mpconfigport.h +++ b/ports/atmel-samd/mpconfigport.h @@ -47,6 +47,7 @@ // MICROPY_PY_UJSON depends on MICROPY_PY_IO #define MICROPY_PY_IO (0) #define MICROPY_PY_REVERSE_SPECIAL_METHODS (0) +#define MICROPY_PY_UBINASCII (0) #define MICROPY_PY_UJSON (0) #define MICROPY_PY_COLLECTIONS_ORDEREDDICT (0) #define MICROPY_PY_UERRNO_LIST \ diff --git a/py/circuitpy_mpconfig.h b/py/circuitpy_mpconfig.h index 1e01bd9c5..08efabddb 100644 --- a/py/circuitpy_mpconfig.h +++ b/py/circuitpy_mpconfig.h @@ -197,6 +197,9 @@ typedef long mp_off_t; #ifndef MICROPY_PY_COLLECTIONS_ORDEREDDICT #define MICROPY_PY_COLLECTIONS_ORDEREDDICT (CIRCUITPY_FULL_BUILD) #endif +#ifndef MICROPY_PY_UBINASCII +#define MICROPY_PY_UBINASCII (CIRCUITPY_FULL_BUILD) +#endif // Opposite setting is deliberate. #define MICROPY_PY_UERRNO_ERRORCODE (!CIRCUITPY_FULL_BUILD) #ifndef MICROPY_PY_URE @@ -699,6 +702,12 @@ extern const struct _mp_obj_module_t ustack_module; #endif // These modules are not yet in shared-bindings, but we prefer the non-uxxx names. +#if MICROPY_PY_UBINASCII +#define BINASCII_MODULE { MP_ROM_QSTR(MP_QSTR_binascii), MP_ROM_PTR(&mp_module_ubinascii) }, +#else +#define BINASCII_MODULE +#endif + #if MICROPY_PY_UERRNO #define ERRNO_MODULE { MP_ROM_QSTR(MP_QSTR_errno), MP_ROM_PTR(&mp_module_uerrno) }, #else @@ -770,6 +779,7 @@ extern const struct _mp_obj_module_t wifi_module; AUDIOMIXER_MODULE \ AUDIOMP3_MODULE \ AUDIOPWMIO_MODULE \ + BINASCII_MODULE \ BITBANGIO_MODULE \ BLEIO_MODULE \ BOARD_MODULE \ diff --git a/py/objmodule.c b/py/objmodule.c index 757aece04..90796c535 100644 --- a/py/objmodule.c +++ b/py/objmodule.c @@ -239,7 +239,12 @@ STATIC const mp_rom_map_elem_t mp_builtin_module_table[] = { { MP_ROM_QSTR(MP_QSTR_hashlib), MP_ROM_PTR(&mp_module_uhashlib) }, #endif #if MICROPY_PY_UBINASCII - { MP_ROM_QSTR(MP_QSTR_binascii), MP_ROM_PTR(&mp_module_ubinascii) }, +#if CIRCUITPY +// CircuitPython: Defined in MICROPY_PORT_BUILTIN_MODULES, so not defined here. +// TODO: move to shared-bindings/ +#else + { MP_ROM_QSTR(MP_QSTR_ubinascii), MP_ROM_PTR(&mp_module_ubinascii) }, +#endif #endif #if MICROPY_PY_URANDOM { MP_ROM_QSTR(MP_QSTR_urandom), MP_ROM_PTR(&mp_module_urandom) }, -- cgit v1.2.3 From 4e52757f2653b16b91856df7575ec503c02c5d22 Mon Sep 17 00:00:00 2001 From: "ITACA Innovation S.R.L" <40298126+ITACAInnovation@users.noreply.github.com> Date: Sun, 1 Nov 2020 22:22:55 +0100 Subject: Update pins.c Added LED, BOOST_EN and VEXT_SELECT pins. --- ports/atmel-samd/boards/uchip/pins.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/ports/atmel-samd/boards/uchip/pins.c b/ports/atmel-samd/boards/uchip/pins.c index cfb643233..2d7eeebe1 100644 --- a/ports/atmel-samd/boards/uchip/pins.c +++ b/ports/atmel-samd/boards/uchip/pins.c @@ -1,6 +1,9 @@ #include "shared-bindings/board/__init__.h" STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_LED_BUILTIN), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_BOOST_EN), MP_ROM_PTR(&pin_PA14) }, + { MP_ROM_QSTR(MP_QSTR_VEXT_SELECT), MP_ROM_PTR(&pin_PA15) }, { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA06) }, { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA06) }, { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA08) }, -- cgit v1.2.3 From 041c2a9f6174996a7c841e4ff7a1e158958c9745 Mon Sep 17 00:00:00 2001 From: Brian Dean Date: Mon, 2 Nov 2020 08:35:25 -0500 Subject: .../boards/bdmicro_vina_d51: PAD updates for better resource flexibility. --- .../boards/bdmicro_vina_d51/mpconfigboard.h | 10 +- ports/atmel-samd/boards/bdmicro_vina_d51/pins.c | 118 +++++++++++---------- 2 files changed, 68 insertions(+), 60 deletions(-) diff --git a/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.h b/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.h index 6bc9bb706..8b015df05 100644 --- a/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.h +++ b/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.h @@ -12,14 +12,14 @@ #define BOARD_HAS_CRYSTAL 1 -#define DEFAULT_I2C_BUS_SDA (&pin_PB02) -#define DEFAULT_I2C_BUS_SCL (&pin_PB03) +#define DEFAULT_I2C_BUS_SCL (&pin_PA16) +#define DEFAULT_I2C_BUS_SDA (&pin_PA17) +#define DEFAULT_UART_BUS_RX (&pin_PB20) +#define DEFAULT_UART_BUS_TX (&pin_PB21) #define DEFAULT_SPI_BUS_MISO (&pin_PB23) -#define DEFAULT_UART_BUS_TX (&pin_PB24) -#define DEFAULT_UART_BUS_RX (&pin_PB25) #define DEFAULT_SPI_BUS_MOSI (&pin_PC27) #define DEFAULT_SPI_BUS_SCK (&pin_PC28) -#define MICROPY_HW_LED_STATUS (&pin_PA15) +#define MICROPY_HW_LED_STATUS (&pin_PA23) #define MICROPY_HW_LED_RX (&pin_PC05) #define MICROPY_HW_LED_TX (&pin_PC06) diff --git a/ports/atmel-samd/boards/bdmicro_vina_d51/pins.c b/ports/atmel-samd/boards/bdmicro_vina_d51/pins.c index 931e0328f..8eeab8a9a 100644 --- a/ports/atmel-samd/boards/bdmicro_vina_d51/pins.c +++ b/ports/atmel-samd/boards/bdmicro_vina_d51/pins.c @@ -1,64 +1,70 @@ #include "shared-bindings/board/__init__.h" STATIC const mp_rom_map_elem_t board_global_dict_table[] = { - { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PB08) }, - { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB09) }, - { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_PC00) }, - { MP_ROM_QSTR(MP_QSTR_A11), MP_ROM_PTR(&pin_PC01) }, - { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA04) }, - { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA06) }, - { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA07) }, - { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PB00) }, - { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PB01) }, - { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PB05) }, - { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PB06) }, - { MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_PB07) }, - { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PC10) }, - { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PC11) }, - { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA14) }, - { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA13) }, - { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PB14) }, - { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PB15) }, - { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PC20) }, - { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PC21) }, - { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA12) }, - { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB31) }, - { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA16) }, - { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_PB07) }, + { MP_ROM_QSTR(MP_QSTR_A11), MP_ROM_PTR(&pin_PC00) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PB08) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PC02) }, + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PC03) }, + { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PB04) }, + { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PB05) }, + { MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PB31) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PC16) }, + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PC13) }, + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA14) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PB12) }, + { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_PB13) }, + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PC17) }, + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PC18) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PC19) }, + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PC20) }, + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PC21) }, + { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB18) }, + { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PB19) }, + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PC12) }, { MP_ROM_QSTR(MP_QSTR_DAC0), MP_ROM_PTR(&pin_PA02) }, { MP_ROM_QSTR(MP_QSTR_DAC1), MP_ROM_PTR(&pin_PA05) }, - { MP_ROM_QSTR(MP_QSTR_ESP01_EN), MP_ROM_PTR(&pin_PC03) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_EN), MP_ROM_PTR(&pin_PC15) }, + { MP_ROM_QSTR(MP_QSTR_E5), MP_ROM_PTR(&pin_PC15) }, { MP_ROM_QSTR(MP_QSTR_ESP01_GPIO0), MP_ROM_PTR(&pin_PA18) }, - { MP_ROM_QSTR(MP_QSTR_UART3_RTS), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_E3), MP_ROM_PTR(&pin_PA18) }, { MP_ROM_QSTR(MP_QSTR_ESP01_GPIO2), MP_ROM_PTR(&pin_PA19) }, - { MP_ROM_QSTR(MP_QSTR_UART3_CTS), MP_ROM_PTR(&pin_PA19) }, - { MP_ROM_QSTR(MP_QSTR_ESP01_RESET), MP_ROM_PTR(&pin_PC02) }, - { MP_ROM_QSTR(MP_QSTR_ESP01_RX), MP_ROM_PTR(&pin_PB21) }, - { MP_ROM_QSTR(MP_QSTR_UART3_RX), MP_ROM_PTR(&pin_PB21) }, - { MP_ROM_QSTR(MP_QSTR_ESP01_TX), MP_ROM_PTR(&pin_PB20) }, - { MP_ROM_QSTR(MP_QSTR_UART3_TX), MP_ROM_PTR(&pin_PB20) }, - { MP_ROM_QSTR(MP_QSTR_I2C_SCL), MP_ROM_PTR(&pin_PB03) }, - { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB03) }, - { MP_ROM_QSTR(MP_QSTR_I2C_SDA), MP_ROM_PTR(&pin_PB02) }, - { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_E4), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_RESET), MP_ROM_PTR(&pin_PC14) }, + { MP_ROM_QSTR(MP_QSTR_E6), MP_ROM_PTR(&pin_PC14) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_RX), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_UART3_RX), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_I2C3_SCL), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_E2), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_TX), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_UART3_TX), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_I2C3_SDA), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_E1), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_I2C1_SCL), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_I2C1_SDA), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA17) }, { MP_ROM_QSTR(MP_QSTR_I2S_FS_0), MP_ROM_PTR(&pin_PA20) }, - { MP_ROM_QSTR(MP_QSTR_I2S_FS_1), MP_ROM_PTR(&pin_PA23) }, { MP_ROM_QSTR(MP_QSTR_I2S_MCK_0), MP_ROM_PTR(&pin_PB17) }, - { MP_ROM_QSTR(MP_QSTR_I2S_MCK_1), MP_ROM_PTR(&pin_PB13) }, { MP_ROM_QSTR(MP_QSTR_I2S_SCK_0), MP_ROM_PTR(&pin_PB16) }, - { MP_ROM_QSTR(MP_QSTR_I2S_SCK_1), MP_ROM_PTR(&pin_PB12) }, { MP_ROM_QSTR(MP_QSTR_I2S_SDI), MP_ROM_PTR(&pin_PA22) }, { MP_ROM_QSTR(MP_QSTR_I2S_SDO), MP_ROM_PTR(&pin_PA21) }, - { MP_ROM_QSTR(MP_QSTR_LED_B), MP_ROM_PTR(&pin_PA15) }, - { MP_ROM_QSTR(MP_QSTR_LED_STATUS), MP_ROM_PTR(&pin_PA15) }, - { MP_ROM_QSTR(MP_QSTR_LED_G), MP_ROM_PTR(&pin_PB18) }, - { MP_ROM_QSTR(MP_QSTR_LED_R), MP_ROM_PTR(&pin_PB19) }, + { MP_ROM_QSTR(MP_QSTR_LED_B), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_LED_STATUS), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_LED_G), MP_ROM_PTR(&pin_PB15) }, + { MP_ROM_QSTR(MP_QSTR_LED_R), MP_ROM_PTR(&pin_PB14) }, { MP_ROM_QSTR(MP_QSTR_LED_RX), MP_ROM_PTR(&pin_PC05) }, { MP_ROM_QSTR(MP_QSTR_LED_TX), MP_ROM_PTR(&pin_PC06) }, - { MP_ROM_QSTR(MP_QSTR_RS485_RE), MP_ROM_PTR(&pin_PC15) }, - { MP_ROM_QSTR(MP_QSTR_RS485_RX), MP_ROM_PTR(&pin_PC13) }, - { MP_ROM_QSTR(MP_QSTR_RS485_TE), MP_ROM_PTR(&pin_PC14) }, - { MP_ROM_QSTR(MP_QSTR_RS485_TX), MP_ROM_PTR(&pin_PC12) }, + { MP_ROM_QSTR(MP_QSTR_RS485_RE), MP_ROM_PTR(&pin_PB01) }, + { MP_ROM_QSTR(MP_QSTR_RS485_RX), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_RS485_TE), MP_ROM_PTR(&pin_PB00) }, + { MP_ROM_QSTR(MP_QSTR_RS485_TX), MP_ROM_PTR(&pin_PB02) }, { MP_ROM_QSTR(MP_QSTR_SPI_MISO), MP_ROM_PTR(&pin_PB23) }, { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB23) }, { MP_ROM_QSTR(MP_QSTR_SPI_MOSI), MP_ROM_PTR(&pin_PC27) }, @@ -67,14 +73,16 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PC28) }, { MP_ROM_QSTR(MP_QSTR_SPI_SS), MP_ROM_PTR(&pin_PB22) }, { MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_PB22) }, - { MP_ROM_QSTR(MP_QSTR_UART1_CTS), MP_ROM_PTR(&pin_PC19) }, - { MP_ROM_QSTR(MP_QSTR_UART1_RTS), MP_ROM_PTR(&pin_PC18) }, - { MP_ROM_QSTR(MP_QSTR_UART1_RX), MP_ROM_PTR(&pin_PC17) }, - { MP_ROM_QSTR(MP_QSTR_UART1_TX), MP_ROM_PTR(&pin_PC16) }, - { MP_ROM_QSTR(MP_QSTR_UART2_RX), MP_ROM_PTR(&pin_PB25) }, - { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB25) }, - { MP_ROM_QSTR(MP_QSTR_UART2_TX), MP_ROM_PTR(&pin_PB24) }, - { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB24) }, + { MP_ROM_QSTR(MP_QSTR_UART1_CTS), MP_ROM_PTR(&pin_PC25) }, + { MP_ROM_QSTR(MP_QSTR_UART1_RTS), MP_ROM_PTR(&pin_PC24) }, + { MP_ROM_QSTR(MP_QSTR_UART1_RX), MP_ROM_PTR(&pin_PB24) }, + { MP_ROM_QSTR(MP_QSTR_UART1_TX), MP_ROM_PTR(&pin_PB25) }, + { MP_ROM_QSTR(MP_QSTR_UART2_RX), MP_ROM_PTR(&pin_PB20) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB20) }, + { MP_ROM_QSTR(MP_QSTR_I2C2_SCL), MP_ROM_PTR(&pin_PB20) }, + { MP_ROM_QSTR(MP_QSTR_UART2_TX), MP_ROM_PTR(&pin_PB21) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB21) }, + { MP_ROM_QSTR(MP_QSTR_I2C2_SDA), MP_ROM_PTR(&pin_PB21) }, { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, -- cgit v1.2.3 From 23afe08b6f81b70e2f24c609e6c43b0682aaf30b Mon Sep 17 00:00:00 2001 From: Lucian Copeland Date: Mon, 2 Nov 2020 17:15:19 -0500 Subject: Add GPIO reset to end of neopixel-write --- ports/esp32s2/common-hal/neopixel_write/__init__.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/ports/esp32s2/common-hal/neopixel_write/__init__.c b/ports/esp32s2/common-hal/neopixel_write/__init__.c index 553cb79f8..63d50bf14 100644 --- a/ports/esp32s2/common-hal/neopixel_write/__init__.c +++ b/ports/esp32s2/common-hal/neopixel_write/__init__.c @@ -125,4 +125,6 @@ void common_hal_neopixel_write (const digitalio_digitalinout_obj_t* digitalinout // Free channel again esp32s2_peripherals_free_rmt(config.channel); + // Swap pin back to GPIO mode + gpio_set_direction(digitalinout->pin->number, GPIO_MODE_OUTPUT); } -- cgit v1.2.3 From 6c61a53e0fc7a2b56156551a7da07e8734e00a33 Mon Sep 17 00:00:00 2001 From: lady ada Date: Mon, 2 Nov 2020 18:38:23 -0500 Subject: io naming for gpio (credit to @kattni) --- ports/esp32s2/boards/adafruit_metro_esp32s2/pins.c | 60 ++++++++++++++-------- 1 file changed, 40 insertions(+), 20 deletions(-) diff --git a/ports/esp32s2/boards/adafruit_metro_esp32s2/pins.c b/ports/esp32s2/boards/adafruit_metro_esp32s2/pins.c index 08d2b2a1a..a7fc8b2d7 100644 --- a/ports/esp32s2/boards/adafruit_metro_esp32s2/pins.c +++ b/ports/esp32s2/boards/adafruit_metro_esp32s2/pins.c @@ -2,41 +2,61 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_OBJ_NEW_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO17) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO18) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO1) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO2) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO3) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO4) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO5) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO5) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO6) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO6) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO7) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO8) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO9) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO10) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO11) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO12) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO13) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO14) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO15) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO16) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO21) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO42) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) }, { MP_OBJ_NEW_QSTR(MP_QSTR_SDA),MP_ROM_PTR(&pin_GPIO33) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO33),MP_ROM_PTR(&pin_GPIO33) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_SCL),MP_ROM_PTR(&pin_GPIO34) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO34),MP_ROM_PTR(&pin_GPIO34) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_MOSI),MP_ROM_PTR(&pin_GPIO35) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO35),MP_ROM_PTR(&pin_GPIO35) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_MISO),MP_ROM_PTR(&pin_GPIO37) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO37),MP_ROM_PTR(&pin_GPIO37) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO42) }, { MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO45) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) }, { MP_OBJ_NEW_QSTR(MP_QSTR_DEBUG_RX), MP_ROM_PTR(&pin_GPIO38) }, { MP_OBJ_NEW_QSTR(MP_QSTR_DEBUG_TX), MP_ROM_PTR(&pin_GPIO37) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_MOSI),MP_ROM_PTR(&pin_GPIO35) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_MISO),MP_ROM_PTR(&pin_GPIO37) }, - { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, -- cgit v1.2.3 From 18838e390a71366ccaa1aaeda8964e65d70fc43f Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Thu, 29 Oct 2020 19:38:25 -0700 Subject: reduce connection footprint and fix recv --- ports/esp32s2/common-hal/socketpool/Socket.c | 22 ++++++++--------- ports/esp32s2/esp-idf-config/sdkconfig.defaults | 33 ++++++++++++++++--------- 2 files changed, 31 insertions(+), 24 deletions(-) diff --git a/ports/esp32s2/common-hal/socketpool/Socket.c b/ports/esp32s2/common-hal/socketpool/Socket.c index 0a994c604..750415dc7 100644 --- a/ports/esp32s2/common-hal/socketpool/Socket.c +++ b/ports/esp32s2/common-hal/socketpool/Socket.c @@ -79,15 +79,15 @@ mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len) { size_t received = 0; - ssize_t last_read = 1; + int status = 0; uint64_t start_ticks = supervisor_ticks_ms64(); int sockfd; esp_err_t err = esp_tls_get_conn_sockfd(self->tcp, &sockfd); if (err != ESP_OK) { mp_raise_OSError(MP_EBADF); } - while (received < len && - last_read > 0 && + while (received == 0 && + status >= 0 && (self->timeout_ms == 0 || supervisor_ticks_ms64() - start_ticks <= self->timeout_ms) && !mp_hal_is_interrupted()) { RUN_BACKGROUND_TASKS; @@ -95,27 +95,25 @@ mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, if (available == 0) { // This reads the raw socket buffer and is used for non-TLS connections // and between encrypted TLS blocks. - int status = lwip_ioctl(sockfd, FIONREAD, &available); - if (status < 0) { - last_read = status; - break; - } + status = lwip_ioctl(sockfd, FIONREAD, &available); } size_t remaining = len - received; if (available > remaining) { available = remaining; } if (available > 0) { - last_read = esp_tls_conn_read(self->tcp, (void*) buf + received, available); - received += last_read; + status = esp_tls_conn_read(self->tcp, (void*) buf + received, available); + if (status > 0) { + received += status; + } } } - if (last_read == 0) { + if (received == 0) { // socket closed common_hal_socketpool_socket_close(self); } - if (last_read < 0) { + if (status < 0) { mp_raise_BrokenPipeError(); } return received; diff --git a/ports/esp32s2/esp-idf-config/sdkconfig.defaults b/ports/esp32s2/esp-idf-config/sdkconfig.defaults index 4094367e0..37b33fc69 100644 --- a/ports/esp32s2/esp-idf-config/sdkconfig.defaults +++ b/ports/esp32s2/esp-idf-config/sdkconfig.defaults @@ -135,6 +135,7 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y # CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set # CONFIG_COMPILER_WARN_WRITE_STRINGS is not set # CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set +# CONFIG_COMPILER_DUMP_RTL_FILES is not set # end of Compiler options # @@ -332,12 +333,13 @@ CONFIG_ESP_TIMER_IMPL_SYSTIMER=y # # Wi-Fi # -CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 -CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 +CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=4 +CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=8 # CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1 -CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32 +CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=16 +CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=16 # CONFIG_ESP32_WIFI_CSI_ENABLED is not set CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y CONFIG_ESP32_WIFI_TX_BA_WIN=6 @@ -439,7 +441,7 @@ CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y # CONFIG_LWIP_L2_TO_L3_COPY is not set # CONFIG_LWIP_IRAM_OPTIMIZATION is not set CONFIG_LWIP_TIMERS_ONDEMAND=y -CONFIG_LWIP_MAX_SOCKETS=10 +CONFIG_LWIP_MAX_SOCKETS=4 # CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set # CONFIG_LWIP_SO_LINGER is not set CONFIG_LWIP_SO_REUSE=y @@ -459,6 +461,9 @@ CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y # CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set +# +# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set + # # DHCP server # @@ -474,15 +479,15 @@ CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 # # TCP # -CONFIG_LWIP_MAX_ACTIVE_TCP=16 -CONFIG_LWIP_MAX_LISTENING_TCP=16 +CONFIG_LWIP_MAX_ACTIVE_TCP=4 +CONFIG_LWIP_MAX_LISTENING_TCP=4 CONFIG_LWIP_TCP_MAXRTX=12 CONFIG_LWIP_TCP_SYNMAXRTX=6 CONFIG_LWIP_TCP_MSS=1440 CONFIG_LWIP_TCP_TMR_INTERVAL=250 CONFIG_LWIP_TCP_MSL=60000 -CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744 -CONFIG_LWIP_TCP_WND_DEFAULT=5744 +CONFIG_LWIP_TCP_SND_BUF_DEFAULT=2880 +CONFIG_LWIP_TCP_WND_DEFAULT=2880 CONFIG_LWIP_TCP_RECVMBOX_SIZE=6 CONFIG_LWIP_TCP_QUEUE_OOSEQ=y # CONFIG_LWIP_TCP_SACK_OUT is not set @@ -505,6 +510,8 @@ CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF # CONFIG_LWIP_PPP_SUPPORT is not set +CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3 +CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5 # CONFIG_LWIP_SLIP_SUPPORT is not set # @@ -552,8 +559,10 @@ CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y # CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384 -CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 -# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set +CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=2048 +CONFIG_MBEDTLS_DYNAMIC_BUFFER=y +CONFIG_MBEDTLS_DYNAMIC_FREE_PEER_CERT=y +CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA=y # CONFIG_MBEDTLS_DEBUG is not set # @@ -824,8 +833,8 @@ CONFIG_TCP_MAXRTX=12 CONFIG_TCP_SYNMAXRTX=6 CONFIG_TCP_MSS=1440 CONFIG_TCP_MSL=60000 -CONFIG_TCP_SND_BUF_DEFAULT=5744 -CONFIG_TCP_WND_DEFAULT=5744 +CONFIG_TCP_SND_BUF_DEFAULT=2880 +CONFIG_TCP_WND_DEFAULT=2880 CONFIG_TCP_RECVMBOX_SIZE=6 CONFIG_TCP_QUEUE_OOSEQ=y # CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set -- cgit v1.2.3 From 88fcf4ef7e001e547ed94747df5d22b6736c881c Mon Sep 17 00:00:00 2001 From: sw23 Date: Mon, 2 Nov 2020 19:59:07 -0500 Subject: Removing implementation-specific values for socket/socketpool class attributes --- shared-bindings/socket/__init__.c | 12 ++++++------ shared-bindings/socketpool/SocketPool.c | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/shared-bindings/socket/__init__.c b/shared-bindings/socket/__init__.c index 2969b3714..799bf28af 100644 --- a/shared-bindings/socket/__init__.c +++ b/shared-bindings/socket/__init__.c @@ -49,12 +49,12 @@ STATIC const mp_obj_type_t socket_type; //| class socket: //| -//| AF_INET = 2 -//| AF_INET6 = 10 -//| SOCK_STREAM = 1 -//| SOCK_DGRAM = 2 -//| SOCK_RAW = 3 -//| IPPROTO_TCP = 6 +//| AF_INET: int +//| AF_INET6: int +//| SOCK_STREAM: int +//| SOCK_DGRAM: int +//| SOCK_RAW: int +//| IPPROTO_TCP: int //| //| def __init__(self, family: int = AF_INET, type: int = SOCK_STREAM, proto: int = IPPROTO_TCP) -> None: //| """Create a new socket diff --git a/shared-bindings/socketpool/SocketPool.c b/shared-bindings/socketpool/SocketPool.c index 2234f359e..73eeed265 100644 --- a/shared-bindings/socketpool/SocketPool.c +++ b/shared-bindings/socketpool/SocketPool.c @@ -57,12 +57,12 @@ STATIC mp_obj_t socketpool_socketpool_make_new(const mp_obj_type_t *type, size_t return MP_OBJ_FROM_PTR(s); } -//| AF_INET = 0 -//| AF_INET6 = 1 -//| SOCK_STREAM = 0 -//| SOCK_DGRAM = 1 -//| SOCK_RAW = 2 -//| IPPROTO_TCP = 6 +//| AF_INET: int +//| AF_INET6: int +//| SOCK_STREAM: int +//| SOCK_DGRAM: int +//| SOCK_RAW: int +//| IPPROTO_TCP: int //| //| def socket(self, family: int = AF_INET, type: int = SOCK_STREAM, proto: int = IPPROTO_TCP) -> socketpool.Socket: //| """Create a new socket -- cgit v1.2.3 From 7441344c6f29d9dbf7f8cedef55f394c42916963 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Mon, 2 Nov 2020 17:22:24 -0800 Subject: Add new config options to default --- ports/esp32s2/esp-idf-config/sdkconfig.defaults | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/ports/esp32s2/esp-idf-config/sdkconfig.defaults b/ports/esp32s2/esp-idf-config/sdkconfig.defaults index 37b33fc69..025b05caa 100644 --- a/ports/esp32s2/esp-idf-config/sdkconfig.defaults +++ b/ports/esp32s2/esp-idf-config/sdkconfig.defaults @@ -264,6 +264,11 @@ CONFIG_ESP32S2_ALLOW_RTC_FAST_MEM_AS_HEAP=y # CONFIG_PM_ENABLE is not set # end of Power Management +# +# ADC-Calibration +# +# end of ADC-Calibration + # # Common ESP-related # @@ -403,6 +408,7 @@ CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0 # CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y # CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set +# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set CONFIG_FREERTOS_DEBUG_OCDAWARE=y # end of FreeRTOS @@ -715,6 +721,7 @@ CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20 CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1 CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192 +# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set # # Auto-detect flash chips -- cgit v1.2.3 From c4521287e39abf92f1833a25f950aa5bd8e4857c Mon Sep 17 00:00:00 2001 From: lady ada Date: Mon, 2 Nov 2020 23:22:53 -0500 Subject: add rx/tx default uart names --- ports/esp32s2/boards/adafruit_metro_esp32s2/pins.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/ports/esp32s2/boards/adafruit_metro_esp32s2/pins.c b/ports/esp32s2/boards/adafruit_metro_esp32s2/pins.c index a7fc8b2d7..dbd6cfef8 100644 --- a/ports/esp32s2/boards/adafruit_metro_esp32s2/pins.c +++ b/ports/esp32s2/boards/adafruit_metro_esp32s2/pins.c @@ -19,8 +19,12 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_OBJ_NEW_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO4) }, { MP_OBJ_NEW_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO5) }, { MP_OBJ_NEW_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO6) }, { MP_OBJ_NEW_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) }, { MP_OBJ_NEW_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) }, { MP_OBJ_NEW_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) }, -- cgit v1.2.3 From 4055c5ac61f824f7f2cfd72e670037af2f601427 Mon Sep 17 00:00:00 2001 From: Ed Hagerty Date: Tue, 3 Nov 2020 17:14:58 +0000 Subject: Update README.md --- ports/esp32s2/README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/esp32s2/README.md b/ports/esp32s2/README.md index f3e678de8..0738d520e 100644 --- a/ports/esp32s2/README.md +++ b/ports/esp32s2/README.md @@ -30,7 +30,7 @@ Connect these pins using a [USB adapter](https://www.adafruit.com/product/4090) ## Building and flashing ## -Before building or flashing the ESP32-S2, you must [install the esp-idf](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/get-started/index.html). This must be re-done ever time the esp-idf is updated, but not every time you build. Run `cd ports/esp32s2` from `circuitpython/` to move to the esp32s2 port root, and run: +Before building or flashing the ESP32-S2, you must [install the esp-idf](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/get-started/index.html). This must be re-done every time the esp-idf is updated, but not every time you build. Run `cd ports/esp32s2` from `circuitpython/` to move to the esp32s2 port root, and run: ``` ./esp-idf/install.sh -- cgit v1.2.3 From ca935c0dafba767f8eae681664972d0f6a0c5507 Mon Sep 17 00:00:00 2001 From: "ITACA Innovation S.R.L" <40298126+ITACAInnovation@users.noreply.github.com> Date: Tue, 3 Nov 2020 21:22:19 +0100 Subject: Update pins.c Changed builtin to standard --- ports/atmel-samd/boards/uchip/pins.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/atmel-samd/boards/uchip/pins.c b/ports/atmel-samd/boards/uchip/pins.c index 2d7eeebe1..de5508110 100644 --- a/ports/atmel-samd/boards/uchip/pins.c +++ b/ports/atmel-samd/boards/uchip/pins.c @@ -1,7 +1,7 @@ #include "shared-bindings/board/__init__.h" STATIC const mp_rom_map_elem_t board_global_dict_table[] = { - { MP_ROM_QSTR(MP_QSTR_LED_BUILTIN), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_PA07) }, { MP_ROM_QSTR(MP_QSTR_BOOST_EN), MP_ROM_PTR(&pin_PA14) }, { MP_ROM_QSTR(MP_QSTR_VEXT_SELECT), MP_ROM_PTR(&pin_PA15) }, { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA06) }, -- cgit v1.2.3 From fe6bfde590fc325c984c679825024241afd23a5f Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Wed, 4 Nov 2020 21:20:24 +0530 Subject: move pcnt handler --- locale/circuitpython.pot | 10 ++--- ports/esp32s2/Makefile | 2 +- ports/esp32s2/pcnt_handler.c | 67 -------------------------------- ports/esp32s2/pcnt_handler.h | 35 ----------------- ports/esp32s2/peripherals/pcnt_handler.c | 67 ++++++++++++++++++++++++++++++++ ports/esp32s2/peripherals/pcnt_handler.h | 35 +++++++++++++++++ 6 files changed, 108 insertions(+), 108 deletions(-) delete mode 100644 ports/esp32s2/pcnt_handler.c delete mode 100644 ports/esp32s2/pcnt_handler.h create mode 100644 ports/esp32s2/peripherals/pcnt_handler.c create mode 100644 ports/esp32s2/peripherals/pcnt_handler.h diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 1336ab25c..b4445abfb 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-01 11:11+0530\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -296,6 +296,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1272,10 +1276,6 @@ msgstr "" msgid "No MOSI Pin" msgstr "" -#: ports/esp32s2/pcnt_handler.c -msgid "No PCNT unit free" -msgstr "" - #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c diff --git a/ports/esp32s2/Makefile b/ports/esp32s2/Makefile index 6dbbf58d4..56f0d46a3 100644 --- a/ports/esp32s2/Makefile +++ b/ports/esp32s2/Makefile @@ -173,7 +173,6 @@ SRC_C += \ background.c \ fatfs_port.c \ mphalport.c \ - pcnt_handler.c \ bindings/espidf/__init__.c \ boards/$(BOARD)/board.c \ boards/$(BOARD)/pins.c \ @@ -189,6 +188,7 @@ SRC_C += \ lib/utils/pyexec.c \ lib/utils/stdout_helpers.c \ lib/utils/sys_stdio_mphal.c \ + peripherals/pcnt_handler.c \ peripherals/pins.c \ peripherals/rmt.c \ supervisor/shared/memory.c diff --git a/ports/esp32s2/pcnt_handler.c b/ports/esp32s2/pcnt_handler.c deleted file mode 100644 index 56fb0f21c..000000000 --- a/ports/esp32s2/pcnt_handler.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2020 microDev - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "pcnt_handler.h" - -#include "py/runtime.h" -#include "supervisor/shared/translate.h" - -#define PCNT_UNIT_ACTIVE 1 -#define PCNT_UNIT_INACTIVE 0 - -static uint8_t pcnt_state[4]; - -void pcnt_handler_init(pcnt_config_t* pcnt_config) { - // Look for available pcnt unit - for (uint8_t i = 0; i<=3; i++) { - if (pcnt_state[i] == PCNT_UNIT_INACTIVE) { - pcnt_config->unit = (pcnt_unit_t)i; - pcnt_state[i] = PCNT_UNIT_ACTIVE; - break; - } else if (i == 3) { - mp_raise_RuntimeError(translate("No PCNT unit free")); - } - } - - // Initialize PCNT unit - pcnt_unit_config(pcnt_config); - - // Configure and enable the input filter - pcnt_set_filter_value(pcnt_config->unit, 100); - pcnt_filter_enable(pcnt_config->unit); - - // Initialize PCNT's counter - pcnt_counter_pause(pcnt_config->unit); - pcnt_counter_clear(pcnt_config->unit); - - // Everything is set up, now go to counting - pcnt_counter_resume(pcnt_config->unit); -} - -void pcnt_handler_deinit(pcnt_unit_t* unit) { - pcnt_state[*unit] = PCNT_UNIT_INACTIVE; - *unit = PCNT_UNIT_MAX; -} diff --git a/ports/esp32s2/pcnt_handler.h b/ports/esp32s2/pcnt_handler.h deleted file mode 100644 index 4bdaee1b8..000000000 --- a/ports/esp32s2/pcnt_handler.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2020 microDev - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#ifndef MICROPY_INCLUDED_ESP32S2_PCNT_HANDLER_H -#define MICROPY_INCLUDED_ESP32S2_PCNT_HANDLER_H - -#include "driver/pcnt.h" - -extern void pcnt_handler_init(pcnt_config_t* pcnt_config); -extern void pcnt_handler_deinit(pcnt_unit_t* unit); - -#endif // MICROPY_INCLUDED_ESP32S2_PCNT_HANDLER_H diff --git a/ports/esp32s2/peripherals/pcnt_handler.c b/ports/esp32s2/peripherals/pcnt_handler.c new file mode 100644 index 000000000..5a0cc9a7c --- /dev/null +++ b/ports/esp32s2/peripherals/pcnt_handler.c @@ -0,0 +1,67 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "pcnt_handler.h" + +#include "py/runtime.h" +#include "supervisor/shared/translate.h" + +#define PCNT_UNIT_ACTIVE 1 +#define PCNT_UNIT_INACTIVE 0 + +static uint8_t pcnt_state[4]; + +void pcnt_handler_init(pcnt_config_t* pcnt_config) { + // Look for available pcnt unit + for (uint8_t i = 0; i<=3; i++) { + if (pcnt_state[i] == PCNT_UNIT_INACTIVE) { + pcnt_config->unit = (pcnt_unit_t)i; + pcnt_state[i] = PCNT_UNIT_ACTIVE; + break; + } else if (i == 3) { + mp_raise_RuntimeError(translate("All PCNT units in use")); + } + } + + // Initialize PCNT unit + pcnt_unit_config(pcnt_config); + + // Configure and enable the input filter + pcnt_set_filter_value(pcnt_config->unit, 100); + pcnt_filter_enable(pcnt_config->unit); + + // Initialize PCNT's counter + pcnt_counter_pause(pcnt_config->unit); + pcnt_counter_clear(pcnt_config->unit); + + // Everything is set up, now go to counting + pcnt_counter_resume(pcnt_config->unit); +} + +void pcnt_handler_deinit(pcnt_unit_t* unit) { + pcnt_state[*unit] = PCNT_UNIT_INACTIVE; + *unit = PCNT_UNIT_MAX; +} diff --git a/ports/esp32s2/peripherals/pcnt_handler.h b/ports/esp32s2/peripherals/pcnt_handler.h new file mode 100644 index 000000000..f44ee1f83 --- /dev/null +++ b/ports/esp32s2/peripherals/pcnt_handler.h @@ -0,0 +1,35 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H +#define MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H + +#include "driver/pcnt.h" + +extern void pcnt_handler_init(pcnt_config_t* pcnt_config); +extern void pcnt_handler_deinit(pcnt_unit_t* unit); + +#endif // MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H -- cgit v1.2.3 From 92cd599ea31482b5462438334ef36ae3cfd9dba8 Mon Sep 17 00:00:00 2001 From: cyz Date: Thu, 5 Nov 2020 09:14:53 +0800 Subject: Modify the pins of the hiibot_bluefi. --- ports/nrf/boards/hiibot_bluefi/pins.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/ports/nrf/boards/hiibot_bluefi/pins.c b/ports/nrf/boards/hiibot_bluefi/pins.c index 340ea948c..bce4ee52d 100644 --- a/ports/nrf/boards/hiibot_bluefi/pins.c +++ b/ports/nrf/boards/hiibot_bluefi/pins.c @@ -109,10 +109,10 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR_D26), MP_ROM_PTR(&pin_P0_27) }, { MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_P0_27) }, - { MP_ROM_QSTR(MP_QSTR_P27), MP_ROM_PTR(&pin_P1_14) }, - { MP_ROM_QSTR(MP_QSTR_D27), MP_ROM_PTR(&pin_P1_14) }, - { MP_ROM_QSTR(MP_QSTR_TFT_RESET), MP_ROM_PTR(&pin_P1_14) }, - { MP_ROM_QSTR(MP_QSTR_TFT_BACKLIGHT), MP_ROM_PTR(&pin_P1_14) }, + { MP_ROM_QSTR(MP_QSTR_P27), MP_ROM_PTR(&pin_P1_13) }, + { MP_ROM_QSTR(MP_QSTR_D27), MP_ROM_PTR(&pin_P1_13) }, + //{ MP_ROM_QSTR(MP_QSTR_TFT_RESET), MP_ROM_PTR(&pin_P1_13) }, + { MP_ROM_QSTR(MP_QSTR_TFT_BACKLIGHT), MP_ROM_PTR(&pin_P1_13) }, // P28~P33/D28~D33 connecte into QSPI FlashROM (W25Q16JV_IQ) -- cgit v1.2.3 From d8ef9a127b4914f7d9b50131c15e653aef94cb8f Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Thu, 5 Nov 2020 10:10:39 +0530 Subject: rename pcnt_handler to pcnt --- ports/esp32s2/Makefile | 2 +- ports/esp32s2/common-hal/countio/Counter.c | 5 ++- ports/esp32s2/common-hal/countio/Counter.h | 2 +- ports/esp32s2/peripherals/pcnt.c | 67 ++++++++++++++++++++++++++++++ ports/esp32s2/peripherals/pcnt.h | 35 ++++++++++++++++ ports/esp32s2/peripherals/pcnt_handler.c | 67 ------------------------------ ports/esp32s2/peripherals/pcnt_handler.h | 35 ---------------- 7 files changed, 107 insertions(+), 106 deletions(-) create mode 100644 ports/esp32s2/peripherals/pcnt.c create mode 100644 ports/esp32s2/peripherals/pcnt.h delete mode 100644 ports/esp32s2/peripherals/pcnt_handler.c delete mode 100644 ports/esp32s2/peripherals/pcnt_handler.h diff --git a/ports/esp32s2/Makefile b/ports/esp32s2/Makefile index 56f0d46a3..55d6e91d4 100644 --- a/ports/esp32s2/Makefile +++ b/ports/esp32s2/Makefile @@ -188,7 +188,7 @@ SRC_C += \ lib/utils/pyexec.c \ lib/utils/stdout_helpers.c \ lib/utils/sys_stdio_mphal.c \ - peripherals/pcnt_handler.c \ + peripherals/pcnt.c \ peripherals/pins.c \ peripherals/rmt.c \ supervisor/shared/memory.c diff --git a/ports/esp32s2/common-hal/countio/Counter.c b/ports/esp32s2/common-hal/countio/Counter.c index 435762473..81f9f7ad2 100644 --- a/ports/esp32s2/common-hal/countio/Counter.c +++ b/ports/esp32s2/common-hal/countio/Counter.c @@ -42,7 +42,8 @@ void common_hal_countio_counter_construct(countio_counter_obj_t* self, .neg_mode = PCNT_COUNT_DIS, // Keep the counter value on the negative edge }; // Initialize PCNT unit - pcnt_handler_init(&pcnt_config); + // This also sets pcnt_config.unit + peripherals_pcnt_init(&pcnt_config); self->pin = pin->number; self->unit = pcnt_config.unit; @@ -57,7 +58,7 @@ void common_hal_countio_counter_deinit(countio_counter_obj_t* self) { return; } reset_pin_number(self->pin); - pcnt_handler_deinit(&self->unit); + peripherals_pcnt_deinit(&self->unit); } mp_int_t common_hal_countio_counter_get_count(countio_counter_obj_t* self) { diff --git a/ports/esp32s2/common-hal/countio/Counter.h b/ports/esp32s2/common-hal/countio/Counter.h index 63d1eb98b..20fe5b83e 100644 --- a/ports/esp32s2/common-hal/countio/Counter.h +++ b/ports/esp32s2/common-hal/countio/Counter.h @@ -28,7 +28,7 @@ #define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNTER_H #include "py/obj.h" -#include "pcnt_handler.h" +#include "peripherals/pcnt.h" typedef struct { mp_obj_base_t base; diff --git a/ports/esp32s2/peripherals/pcnt.c b/ports/esp32s2/peripherals/pcnt.c new file mode 100644 index 000000000..e7eb32c1d --- /dev/null +++ b/ports/esp32s2/peripherals/pcnt.c @@ -0,0 +1,67 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "peripherals/pcnt.h" + +#include "py/runtime.h" +#include "supervisor/shared/translate.h" + +#define PCNT_UNIT_ACTIVE 1 +#define PCNT_UNIT_INACTIVE 0 + +static uint8_t pcnt_state[4]; + +void peripherals_pcnt_init(pcnt_config_t* pcnt_config) { + // Look for available pcnt unit + for (uint8_t i = 0; i<=3; i++) { + if (pcnt_state[i] == PCNT_UNIT_INACTIVE) { + pcnt_config->unit = (pcnt_unit_t)i; + pcnt_state[i] = PCNT_UNIT_ACTIVE; + break; + } else if (i == 3) { + mp_raise_RuntimeError(translate("All PCNT units in use")); + } + } + + // Initialize PCNT unit + pcnt_unit_config(pcnt_config); + + // Configure and enable the input filter + pcnt_set_filter_value(pcnt_config->unit, 100); + pcnt_filter_enable(pcnt_config->unit); + + // Initialize PCNT's counter + pcnt_counter_pause(pcnt_config->unit); + pcnt_counter_clear(pcnt_config->unit); + + // Everything is set up, now go to counting + pcnt_counter_resume(pcnt_config->unit); +} + +void peripherals_pcnt_deinit(pcnt_unit_t* unit) { + pcnt_state[*unit] = PCNT_UNIT_INACTIVE; + *unit = PCNT_UNIT_MAX; +} diff --git a/ports/esp32s2/peripherals/pcnt.h b/ports/esp32s2/peripherals/pcnt.h new file mode 100644 index 000000000..64072501c --- /dev/null +++ b/ports/esp32s2/peripherals/pcnt.h @@ -0,0 +1,35 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H +#define MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H + +#include "driver/pcnt.h" + +extern void peripherals_pcnt_init(pcnt_config_t* pcnt_config); +extern void peripherals_pcnt_deinit(pcnt_unit_t* unit); + +#endif // MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H diff --git a/ports/esp32s2/peripherals/pcnt_handler.c b/ports/esp32s2/peripherals/pcnt_handler.c deleted file mode 100644 index 5a0cc9a7c..000000000 --- a/ports/esp32s2/peripherals/pcnt_handler.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2020 microDev - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "pcnt_handler.h" - -#include "py/runtime.h" -#include "supervisor/shared/translate.h" - -#define PCNT_UNIT_ACTIVE 1 -#define PCNT_UNIT_INACTIVE 0 - -static uint8_t pcnt_state[4]; - -void pcnt_handler_init(pcnt_config_t* pcnt_config) { - // Look for available pcnt unit - for (uint8_t i = 0; i<=3; i++) { - if (pcnt_state[i] == PCNT_UNIT_INACTIVE) { - pcnt_config->unit = (pcnt_unit_t)i; - pcnt_state[i] = PCNT_UNIT_ACTIVE; - break; - } else if (i == 3) { - mp_raise_RuntimeError(translate("All PCNT units in use")); - } - } - - // Initialize PCNT unit - pcnt_unit_config(pcnt_config); - - // Configure and enable the input filter - pcnt_set_filter_value(pcnt_config->unit, 100); - pcnt_filter_enable(pcnt_config->unit); - - // Initialize PCNT's counter - pcnt_counter_pause(pcnt_config->unit); - pcnt_counter_clear(pcnt_config->unit); - - // Everything is set up, now go to counting - pcnt_counter_resume(pcnt_config->unit); -} - -void pcnt_handler_deinit(pcnt_unit_t* unit) { - pcnt_state[*unit] = PCNT_UNIT_INACTIVE; - *unit = PCNT_UNIT_MAX; -} diff --git a/ports/esp32s2/peripherals/pcnt_handler.h b/ports/esp32s2/peripherals/pcnt_handler.h deleted file mode 100644 index f44ee1f83..000000000 --- a/ports/esp32s2/peripherals/pcnt_handler.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2020 microDev - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#ifndef MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H -#define MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H - -#include "driver/pcnt.h" - -extern void pcnt_handler_init(pcnt_config_t* pcnt_config); -extern void pcnt_handler_deinit(pcnt_unit_t* unit); - -#endif // MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H -- cgit v1.2.3 From c2aa54ae661612e68768e10b76fd942af036ecda Mon Sep 17 00:00:00 2001 From: root Date: Thu, 5 Nov 2020 11:10:40 -0600 Subject: Check for Ctrl-C during sleeps --- ports/esp32s2/supervisor/port.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 0b9c03f74..2aa01cb15 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -203,7 +203,16 @@ void port_sleep_until_interrupt(void) { if (sleep_time_duration == 0) { return; } - vTaskDelayUntil(&sleep_time_set, sleep_time_duration); + // Need to run in a loop in order to check if CTRL-C was received + TickType_t start_ticks = 0; + while (sleep_time_duration > start_ticks ) { + vTaskDelayUntil(&sleep_time_set, 1); + if ( mp_hal_is_interrupted() ) { + mp_handle_pending(); + } + start_ticks = start_ticks + 1; + } + } -- cgit v1.2.3 From ac8a0faa0d64fd07af65a798c7e1fc5ce4e39df2 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Fri, 6 Nov 2020 01:42:20 +0530 Subject: update peripherals_pcnt_init() --- ports/esp32s2/common-hal/countio/Counter.c | 14 ++++++++++---- ports/esp32s2/peripherals/pcnt.c | 23 +++++++++++------------ ports/esp32s2/peripherals/pcnt.h | 2 +- 3 files changed, 22 insertions(+), 17 deletions(-) diff --git a/ports/esp32s2/common-hal/countio/Counter.c b/ports/esp32s2/common-hal/countio/Counter.c index 81f9f7ad2..fe52d93ad 100644 --- a/ports/esp32s2/common-hal/countio/Counter.c +++ b/ports/esp32s2/common-hal/countio/Counter.c @@ -27,12 +27,15 @@ #include "common-hal/countio/Counter.h" #include "common-hal/microcontroller/Pin.h" +#include "py/runtime.h" +#include "supervisor/shared/translate.h" + void common_hal_countio_counter_construct(countio_counter_obj_t* self, const mcu_pin_obj_t* pin) { claim_pin(pin); // Prepare configuration for the PCNT unit - pcnt_config_t pcnt_config = { + const pcnt_config_t pcnt_config = { // Set PCNT input signal and control GPIOs .pulse_gpio_num = pin->number, .ctrl_gpio_num = PCNT_PIN_NOT_USED, @@ -41,12 +44,15 @@ void common_hal_countio_counter_construct(countio_counter_obj_t* self, .pos_mode = PCNT_COUNT_INC, // Count up on the positive edge .neg_mode = PCNT_COUNT_DIS, // Keep the counter value on the negative edge }; + // Initialize PCNT unit - // This also sets pcnt_config.unit - peripherals_pcnt_init(&pcnt_config); + const int8_t unit = peripherals_pcnt_init(pcnt_config); + if (unit == -1) { + mp_raise_RuntimeError(translate("All PCNT units in use")); + } self->pin = pin->number; - self->unit = pcnt_config.unit; + self->unit = (pcnt_unit_t)unit; } bool common_hal_countio_counter_deinited(countio_counter_obj_t* self) { diff --git a/ports/esp32s2/peripherals/pcnt.c b/ports/esp32s2/peripherals/pcnt.c index e7eb32c1d..555a0ec1d 100644 --- a/ports/esp32s2/peripherals/pcnt.c +++ b/ports/esp32s2/peripherals/pcnt.c @@ -26,39 +26,38 @@ #include "peripherals/pcnt.h" -#include "py/runtime.h" -#include "supervisor/shared/translate.h" - #define PCNT_UNIT_ACTIVE 1 #define PCNT_UNIT_INACTIVE 0 static uint8_t pcnt_state[4]; -void peripherals_pcnt_init(pcnt_config_t* pcnt_config) { +int peripherals_pcnt_init(pcnt_config_t pcnt_config) { // Look for available pcnt unit for (uint8_t i = 0; i<=3; i++) { if (pcnt_state[i] == PCNT_UNIT_INACTIVE) { - pcnt_config->unit = (pcnt_unit_t)i; + pcnt_config.unit = (pcnt_unit_t)i; pcnt_state[i] = PCNT_UNIT_ACTIVE; break; } else if (i == 3) { - mp_raise_RuntimeError(translate("All PCNT units in use")); + return -1; } } // Initialize PCNT unit - pcnt_unit_config(pcnt_config); + pcnt_unit_config(&pcnt_config); // Configure and enable the input filter - pcnt_set_filter_value(pcnt_config->unit, 100); - pcnt_filter_enable(pcnt_config->unit); + pcnt_set_filter_value(pcnt_config.unit, 100); + pcnt_filter_enable(pcnt_config.unit); // Initialize PCNT's counter - pcnt_counter_pause(pcnt_config->unit); - pcnt_counter_clear(pcnt_config->unit); + pcnt_counter_pause(pcnt_config.unit); + pcnt_counter_clear(pcnt_config.unit); // Everything is set up, now go to counting - pcnt_counter_resume(pcnt_config->unit); + pcnt_counter_resume(pcnt_config.unit); + + return pcnt_config.unit; } void peripherals_pcnt_deinit(pcnt_unit_t* unit) { diff --git a/ports/esp32s2/peripherals/pcnt.h b/ports/esp32s2/peripherals/pcnt.h index 64072501c..abed80fd0 100644 --- a/ports/esp32s2/peripherals/pcnt.h +++ b/ports/esp32s2/peripherals/pcnt.h @@ -29,7 +29,7 @@ #include "driver/pcnt.h" -extern void peripherals_pcnt_init(pcnt_config_t* pcnt_config); +extern int peripherals_pcnt_init(pcnt_config_t pcnt_config); extern void peripherals_pcnt_deinit(pcnt_unit_t* unit); #endif // MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H -- cgit v1.2.3 From da04efbf2ed205d73de4f0082017ed15c3f59896 Mon Sep 17 00:00:00 2001 From: DavePutz Date: Thu, 5 Nov 2020 14:25:45 -0600 Subject: Fix missing include in port.c --- ports/esp32s2/supervisor/port.c | 1 + 1 file changed, 1 insertion(+) diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 2aa01cb15..5cd620440 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -30,6 +30,7 @@ #include "supervisor/port.h" #include "boards/board.h" #include "modules/module.h" +#include "py/runtime.h" #include "freertos/FreeRTOS.h" #include "freertos/task.h" -- cgit v1.2.3 From 8ce852e6523a51b419a28642732d5ad3813bdb88 Mon Sep 17 00:00:00 2001 From: Jonny Bergdahl Date: Wed, 4 Nov 2020 20:02:37 +0000 Subject: Translated using Weblate (Swedish) Currently translated at 100.0% (844 of 844 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/sv/ --- locale/sv.po | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/locale/sv.po b/locale/sv.po index 65cd9f6f1..9182a9943 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-21 20:13-0500\n" -"PO-Revision-Date: 2020-11-01 16:26+0000\n" +"PO-Revision-Date: 2020-11-05 20:26+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" "Language: sv\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.3.2-dev\n" +"X-Generator: Weblate 4.3.2\n" #: main.c msgid "" @@ -415,8 +415,8 @@ msgid "" "Auto-reload is on. Simply save files over USB to run them or enter REPL to " "disable.\n" msgstr "" -"Autoladdning är på. Spara bara filer via USB för att köra dem eller ange " -"REPL för att inaktivera.\n" +"Autoladdning är på. Spara filer via USB för att köra dem eller ange REPL för " +"att inaktivera.\n" #: ports/esp32s2/common-hal/canio/CAN.c msgid "Baudrate not supported by peripheral" @@ -2220,7 +2220,7 @@ msgstr "kan bara ha upp till 4 parametrar att Xtensa assembly" #: py/persistentcode.c msgid "can only save bytecode" -msgstr "kan bara spara bytekod" +msgstr "kan bara spara bytecode" #: py/objtype.c msgid "can't add special method to already-subclassed class" -- cgit v1.2.3 From d948e6570f32b08de71b5d088ab445d2de3a7661 Mon Sep 17 00:00:00 2001 From: root Date: Thu, 5 Nov 2020 21:27:21 -0600 Subject: Changes to handle Ctrl-C during sleep --- ports/esp32s2/supervisor/port.c | 32 ++++++++++++++------------------ ports/esp32s2/supervisor/usb.c | 20 ++++++++++++++++++++ 2 files changed, 34 insertions(+), 18 deletions(-) diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 2aa01cb15..46de63627 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -30,6 +30,7 @@ #include "supervisor/port.h" #include "boards/board.h" #include "modules/module.h" +#include "py/runtime.h" #include "freertos/FreeRTOS.h" #include "freertos/task.h" @@ -54,6 +55,7 @@ uint32_t* heap; uint32_t heap_size; +extern TaskHandle_t xTaskToNotify; STATIC esp_timer_handle_t _tick_timer; @@ -188,34 +190,28 @@ void port_disable_tick(void) { esp_timer_stop(_tick_timer); } -TickType_t sleep_time_set; TickType_t sleep_time_duration; +uint32_t NotifyValue = 0; +BaseType_t notify_wait = 0; + void port_interrupt_after_ticks(uint32_t ticks) { - sleep_time_set = xTaskGetTickCount(); - sleep_time_duration = ticks / portTICK_PERIOD_MS; - // esp_sleep_enable_timer_wakeup(uint64_t time_in_us) + sleep_time_duration = (ticks * 100)/1024; + xTaskToNotify = xTaskGetCurrentTaskHandle(); } void port_sleep_until_interrupt(void) { - // FreeRTOS delay here maybe. - // Light sleep shuts down BLE and wifi. - // esp_light_sleep_start() + if (sleep_time_duration == 0) { return; } - // Need to run in a loop in order to check if CTRL-C was received - TickType_t start_ticks = 0; - while (sleep_time_duration > start_ticks ) { - vTaskDelayUntil(&sleep_time_set, 1); - if ( mp_hal_is_interrupted() ) { - mp_handle_pending(); - } - start_ticks = start_ticks + 1; - } - + notify_wait = xTaskNotifyWait(0x01,0x01,&NotifyValue, + sleep_time_duration ); + if (NotifyValue == 1) { + xTaskToNotify = NULL; + mp_handle_pending(); + } } - // Wrap main in app_main that the IDF expects. extern void main(void); void app_main(void) { diff --git a/ports/esp32s2/supervisor/usb.c b/ports/esp32s2/supervisor/usb.c index 1ad6af047..86186d36b 100644 --- a/ports/esp32s2/supervisor/usb.c +++ b/ports/esp32s2/supervisor/usb.c @@ -52,6 +52,8 @@ StackType_t usb_device_stack[USBD_STACK_SIZE]; StaticTask_t usb_device_taskdef; +TaskHandle_t xTaskToNotify = NULL; + // USB Device Driver task // This top level thread process all usb events and invoke callbacks void usb_device_task(void* param) @@ -114,3 +116,21 @@ void init_usb_hardware(void) { usb_device_stack, &usb_device_taskdef); } +/** + * Callback invoked when received an "wanted" char. + * @param itf Interface index (for multiple cdc interfaces) + * @param wanted_char The wanted char (set previously) + */ +void tud_cdc_rx_wanted_cb(uint8_t itf, char wanted_char) +{ + (void) itf; // not used + // Workaround for using lib/utils/interrupt_char.c + // Compare mp_interrupt_char with wanted_char and ignore if not matched + if (mp_interrupt_char == wanted_char) { + tud_cdc_read_flush(); // flush read fifo + mp_keyboard_interrupt(); + if (xTaskToNotify != NULL) { + xTaskNotifyGive(xTaskToNotify); + } + } +} -- cgit v1.2.3 From 93193f2f0b843fc8c052edecd362a1cdd7b30d5d Mon Sep 17 00:00:00 2001 From: sporeball Date: Fri, 6 Nov 2020 19:49:49 +0000 Subject: Translated using Weblate (Japanese) Currently translated at 71.8% (606 of 844 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ja/ --- locale/ja.po | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/locale/ja.po b/locale/ja.po index ae7e51ba6..c9a85c1a2 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -8,15 +8,15 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-10-21 20:13-0500\n" -"PO-Revision-Date: 2020-09-25 18:20+0000\n" -"Last-Translator: Taku Fukada \n" +"PO-Revision-Date: 2020-11-06 20:29+0000\n" +"Last-Translator: sporeball \n" "Language-Team: none\n" "Language: ja\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Weblate 4.3-dev\n" +"X-Generator: Weblate 4.3.2\n" #: main.c msgid "" @@ -162,12 +162,12 @@ msgstr "'%s' にはラベルが必要" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects a register" -msgstr "" +msgstr "'%s'にはレジスタが必要" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects a special register" -msgstr "" +msgstr "'%s'には特別レジスタが必要" #: py/emitinlinethumb.c #, c-format @@ -192,7 +192,7 @@ msgstr "" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects {r0, r1, ...}" -msgstr "" +msgstr "'%s'には{r0, r1, ...}が必要" #: py/emitinlinextensa.c #, c-format @@ -246,7 +246,7 @@ msgstr "'data'には整数の引数が必要" #: py/compile.c msgid "'label' requires 1 argument" -msgstr "" +msgstr "'label'には１つの引数が必要" #: py/compile.c msgid "'return' outside function" @@ -296,7 +296,7 @@ msgstr "address_typeが範囲外" #: ports/esp32s2/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" -msgstr "" +msgstr "全てのCAN周辺機器が使用中" #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" @@ -821,19 +821,19 @@ msgstr "%qが必要" #: shared-bindings/_bleio/CharacteristicBuffer.c #: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c msgid "Expected a Characteristic" -msgstr "" +msgstr "Characteristicが必要" #: shared-bindings/_bleio/Adapter.c msgid "Expected a DigitalInOut" -msgstr "" +msgstr "DigitalInOutが必要" #: shared-bindings/_bleio/Characteristic.c msgid "Expected a Service" -msgstr "" +msgstr "Serviceが必要" #: shared-bindings/_bleio/Adapter.c msgid "Expected a UART" -msgstr "" +msgstr "UARTが必要" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c #: shared-bindings/_bleio/Service.c @@ -842,7 +842,7 @@ msgstr "UUIDが必要" #: shared-bindings/_bleio/Adapter.c msgid "Expected an Address" -msgstr "" +msgstr "Addressが必要" #: shared-module/_pixelbuf/PixelBuf.c #, c-format @@ -886,7 +886,7 @@ msgstr "%dバイトのRXバッファの確保に失敗" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Failed to allocate Wifi memory" -msgstr "" +msgstr "Wi-Fiのメモリの確保に失敗" #: ports/esp32s2/common-hal/wifi/ScannedNetworks.c msgid "Failed to allocate wifi scan memory" @@ -1052,7 +1052,7 @@ msgstr "不正なBMPファイル" #: shared-bindings/wifi/Radio.c msgid "Invalid BSSID" -msgstr "" +msgstr "不正なBSSID" #: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c @@ -1103,7 +1103,7 @@ msgstr "フォーマットチャンクのサイズが不正" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "Invalid frequency" -msgstr "" +msgstr "不正な周波数" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" @@ -1338,11 +1338,11 @@ msgstr "long integerに対応していません" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more channels available" -msgstr "" +msgstr "使えるチャネルがもうありません" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more timers available" -msgstr "" +msgstr "使えるタイマーがもうありません" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." @@ -1658,7 +1658,7 @@ msgstr "" #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" -msgstr "" +msgstr "サイズは対応していません" #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." -- cgit v1.2.3 From cb159569c23f71704b1787f8d6cabacedccca958 Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Fri, 6 Nov 2020 21:29:26 +0100 Subject: Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 9 +++++++-- locale/cs.po | 9 +++++++-- locale/de_DE.po | 9 +++++++-- locale/el.po | 9 +++++++-- locale/es.po | 9 +++++++-- locale/fil.po | 9 +++++++-- locale/fr.po | 9 +++++++-- locale/hi.po | 9 +++++++-- locale/it_IT.po | 9 +++++++-- locale/ja.po | 9 +++++++-- locale/ko.po | 9 +++++++-- locale/nl.po | 9 +++++++-- locale/pl.po | 9 +++++++-- locale/pt_BR.po | 9 +++++++-- locale/sv.po | 9 +++++++-- locale/zh_Latn_pinyin.po | 9 +++++++-- 16 files changed, 112 insertions(+), 32 deletions(-) diff --git a/locale/ID.po b/locale/ID.po index 7debab27a..3e47dc9a1 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-10-10 23:51+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" @@ -300,6 +300,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Semua perangkat I2C sedang digunakan" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1130,7 +1134,8 @@ msgid "Invalid phase" msgstr "Fase tidak valid" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Pin tidak valid" diff --git a/locale/cs.po b/locale/cs.po index e4f677d8e..428d6d1fe 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-05-24 03:22+0000\n" "Last-Translator: dronecz \n" "Language-Team: LANGUAGE \n" @@ -300,6 +300,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1113,7 +1117,8 @@ msgid "Invalid phase" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 141a5e8c0..059d726ca 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-06-16 18:24+0000\n" "Last-Translator: Andreas Buchen \n" "Language: de_DE\n" @@ -299,6 +299,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Alle I2C-Peripheriegeräte sind in Benutzung" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1130,7 +1134,8 @@ msgid "Invalid phase" msgstr "Ungültige Phase" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Ungültiger Pin" diff --git a/locale/el.po b/locale/el.po index cc6da670c..327f4dbe0 100644 --- a/locale/el.po +++ b/locale/el.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -295,6 +295,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1108,7 +1112,8 @@ msgid "Invalid phase" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "" diff --git a/locale/es.po b/locale/es.po index a750c8055..95d6a92ff 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-11-01 16:26+0000\n" "Last-Translator: Alvaro Figueroa \n" "Language-Team: \n" @@ -303,6 +303,10 @@ msgstr "Todos los periféricos CAN están en uso" msgid "All I2C peripherals are in use" msgstr "Todos los periféricos I2C están siendo usados" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1131,7 +1135,8 @@ msgid "Invalid phase" msgstr "Fase inválida" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Pin inválido" diff --git a/locale/fil.po b/locale/fil.po index 7bc33dba3..ce3b5616a 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy \n" "Language-Team: fil\n" @@ -297,6 +297,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Lahat ng I2C peripherals ginagamit" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1123,7 +1127,8 @@ msgid "Invalid phase" msgstr "Mali ang phase" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Mali ang pin" diff --git a/locale/fr.po b/locale/fr.po index 920e22cb0..94ca1f21c 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-10-22 20:48+0000\n" "Last-Translator: Antonin ENFRUN \n" "Language: fr\n" @@ -304,6 +304,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Tous les périphériques I2C sont utilisés" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1136,7 +1140,8 @@ msgid "Invalid phase" msgstr "Phase invalide" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Broche invalide" diff --git a/locale/hi.po b/locale/hi.po index 4966ad8e8..d87a1eb9c 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -295,6 +295,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1108,7 +1112,8 @@ msgid "Invalid phase" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index 82840c852..657c581ce 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin \n" "Language-Team: \n" @@ -296,6 +296,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Tutte le periferiche I2C sono in uso" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1125,7 +1129,8 @@ msgid "Invalid phase" msgstr "Fase non valida" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Pin non valido" diff --git a/locale/ja.po b/locale/ja.po index c9a85c1a2..7004c49f3 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-11-06 20:29+0000\n" "Last-Translator: sporeball \n" "Language-Team: none\n" @@ -302,6 +302,10 @@ msgstr "全てのCAN周辺機器が使用中" msgid "All I2C peripherals are in use" msgstr "全てのI2C周辺機器が使用中" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1123,7 +1127,8 @@ msgid "Invalid phase" msgstr "不正なphase" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "不正なピン" diff --git a/locale/ko.po b/locale/ko.po index 858a036c8..4b302f3b9 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-10-05 12:12+0000\n" "Last-Translator: Michal Čihař \n" "Language-Team: LANGUAGE \n" @@ -298,6 +298,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "사용중인 모든 I2C주변 기기" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1113,7 +1117,8 @@ msgid "Invalid phase" msgstr "단계가 잘못되었습니다" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "핀이 잘못되었습니다" diff --git a/locale/nl.po b/locale/nl.po index bf05abb72..6851e6ef3 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-10-27 16:47+0000\n" "Last-Translator: Jelle Jager \n" "Language-Team: none\n" @@ -300,6 +300,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Alle I2C peripherals zijn in gebruik" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1125,7 +1129,8 @@ msgid "Invalid phase" msgstr "Ongeldige fase" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Ongeldige pin" diff --git a/locale/pl.po b/locale/pl.po index 1dbb0ba12..54ef4d918 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-09-29 01:39+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" @@ -302,6 +302,10 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Wszystkie peryferia I2C w użyciu" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1123,7 +1127,8 @@ msgid "Invalid phase" msgstr "Zła faza" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Zła nóżka" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 7ad85e0b7..ac5c7a667 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-10-28 21:45+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" @@ -304,6 +304,10 @@ msgstr "Todos os periféricos CAN estão em uso" msgid "All I2C peripherals are in use" msgstr "Todos os periféricos I2C estão em uso" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1134,7 +1138,8 @@ msgid "Invalid phase" msgstr "Fase Inválida" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Pino inválido" diff --git a/locale/sv.po b/locale/sv.po index 9182a9943..d9639aff6 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-11-05 20:26+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" @@ -300,6 +300,10 @@ msgstr "All I2C-kringutrustning används" msgid "All I2C peripherals are in use" msgstr "All I2C-kringutrustning används" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1123,7 +1127,8 @@ msgid "Invalid phase" msgstr "Ogiltig fas" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Ogiltig pinne" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 4cc86400d..c1853a73a 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-21 20:13-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-10-28 21:45+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -302,6 +302,10 @@ msgstr "suǒ yǒu CAN wài shè dōu zài shǐ yòng zhōng" msgid "All I2C peripherals are in use" msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng" +#: ports/esp32s2/peripherals/pcnt_handler.c +msgid "All PCNT units in use" +msgstr "" + #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c @@ -1121,7 +1125,8 @@ msgid "Invalid phase" msgstr "Jiēduàn wúxiào" #: ports/atmel-samd/common-hal/audioio/AudioOut.c -#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Wúxiào de yǐn jiǎo" -- cgit v1.2.3 From b2e83952c026485866a7b5a830d85850b09abb38 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Fri, 6 Nov 2020 15:27:16 -0800 Subject: Rebrand EInk Portal to MagTag --- .../boards/adafruit_esp32s2_eink_portal/board.c | 47 ---------------------- .../adafruit_esp32s2_eink_portal/mpconfigboard.h | 45 --------------------- .../adafruit_esp32s2_eink_portal/mpconfigboard.mk | 17 -------- .../boards/adafruit_esp32s2_eink_portal/pins.c | 41 ------------------- .../boards/adafruit_esp32s2_eink_portal/sdkconfig | 33 --------------- ports/esp32s2/boards/adafruit_magtag/board.c | 47 ++++++++++++++++++++++ .../esp32s2/boards/adafruit_magtag/mpconfigboard.h | 45 +++++++++++++++++++++ .../boards/adafruit_magtag/mpconfigboard.mk | 17 ++++++++ ports/esp32s2/boards/adafruit_magtag/pins.c | 41 +++++++++++++++++++ ports/esp32s2/boards/adafruit_magtag/sdkconfig | 33 +++++++++++++++ 10 files changed, 183 insertions(+), 183 deletions(-) delete mode 100644 ports/esp32s2/boards/adafruit_esp32s2_eink_portal/board.c delete mode 100644 ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.h delete mode 100644 ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.mk delete mode 100644 ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c delete mode 100644 ports/esp32s2/boards/adafruit_esp32s2_eink_portal/sdkconfig create mode 100644 ports/esp32s2/boards/adafruit_magtag/board.c create mode 100644 ports/esp32s2/boards/adafruit_magtag/mpconfigboard.h create mode 100644 ports/esp32s2/boards/adafruit_magtag/mpconfigboard.mk create mode 100644 ports/esp32s2/boards/adafruit_magtag/pins.c create mode 100644 ports/esp32s2/boards/adafruit_magtag/sdkconfig diff --git a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/board.c b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/board.c deleted file mode 100644 index 9f708874b..000000000 --- a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/board.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "boards/board.h" -#include "mpconfigboard.h" -#include "shared-bindings/microcontroller/Pin.h" - -void board_init(void) { - // USB - common_hal_never_reset_pin(&pin_GPIO19); - common_hal_never_reset_pin(&pin_GPIO20); - - // Debug UART - common_hal_never_reset_pin(&pin_GPIO43); - common_hal_never_reset_pin(&pin_GPIO44); -} - -bool board_requests_safe_mode(void) { - return false; -} - -void reset_board(void) { - -} diff --git a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.h b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.h deleted file mode 100644 index 5a17a0cad..000000000 --- a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -//Micropython setup - -#define MICROPY_HW_BOARD_NAME "EInk Portal" -#define MICROPY_HW_MCU_NAME "ESP32S2" - -#define MICROPY_HW_NEOPIXEL (&pin_GPIO1) - -#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) - -#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n") - -#define AUTORESET_DELAY_MS 500 - -#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34) -#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) - -#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) -#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) -#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) diff --git a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.mk b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.mk deleted file mode 100644 index 31aff57da..000000000 --- a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/mpconfigboard.mk +++ /dev/null @@ -1,17 +0,0 @@ -USB_VID = 0x239A -USB_PID = 0x80E6 -USB_PRODUCT = "EInk Portal" -USB_MANUFACTURER = "Adafruit" - -INTERNAL_FLASH_FILESYSTEM = 1 -LONGINT_IMPL = MPZ - -# The default queue depth of 16 overflows on release builds, -# so increase it to 32. -CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32 - -CIRCUITPY_ESP_FLASH_MODE=dio -CIRCUITPY_ESP_FLASH_FREQ=40m -CIRCUITPY_ESP_FLASH_SIZE=4MB - -CIRCUITPY_MODULE=wrover diff --git a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c deleted file mode 100644 index 65bc3fb53..000000000 --- a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/pins.c +++ /dev/null @@ -1,41 +0,0 @@ -#include "shared-bindings/board/__init__.h" - -STATIC const mp_rom_map_elem_t board_global_dict_table[] = { - { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) }, - { MP_ROM_QSTR(MP_QSTR_AD1), MP_ROM_PTR(&pin_GPIO18) }, - { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) }, - - { MP_ROM_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_GPIO17) }, - { MP_ROM_QSTR(MP_QSTR_SPEAKER_ENABLE), MP_ROM_PTR(&pin_GPIO16) }, - - { MP_ROM_QSTR(MP_QSTR_EPD_BUSY), MP_ROM_PTR(&pin_GPIO5) }, - { MP_ROM_QSTR(MP_QSTR_EPD_RESET), MP_ROM_PTR(&pin_GPIO6) }, - { MP_ROM_QSTR(MP_QSTR_EPD_DC), MP_ROM_PTR(&pin_GPIO7) }, - { MP_ROM_QSTR(MP_QSTR_EPD_CS), MP_ROM_PTR(&pin_GPIO8) }, - - { MP_ROM_QSTR(MP_QSTR_BUTTON_A), MP_ROM_PTR(&pin_GPIO15) }, - { MP_ROM_QSTR(MP_QSTR_BUTTON_B), MP_ROM_PTR(&pin_GPIO14) }, - { MP_ROM_QSTR(MP_QSTR_BUTTON_C), MP_ROM_PTR(&pin_GPIO12) }, - { MP_ROM_QSTR(MP_QSTR_BUTTON_D), MP_ROM_PTR(&pin_GPIO11) }, - - { MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO3) }, - - { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO4) }, - { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO4) }, - - { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO33) }, - { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO34) }, - - { MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO8) }, - { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) }, - { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) }, - { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO37) }, - - { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO21) }, - - { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO1) }, - - { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, - { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, -}; -MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/sdkconfig b/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/sdkconfig deleted file mode 100644 index 9d8bbde96..000000000 --- a/ports/esp32s2/boards/adafruit_esp32s2_eink_portal/sdkconfig +++ /dev/null @@ -1,33 +0,0 @@ -CONFIG_ESP32S2_SPIRAM_SUPPORT=y - -# -# SPI RAM config -# -# CONFIG_SPIRAM_TYPE_AUTO is not set -CONFIG_SPIRAM_TYPE_ESPPSRAM16=y -# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set -# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set -CONFIG_SPIRAM_SIZE=2097152 - -# -# PSRAM clock and cs IO for ESP32S2 -# -CONFIG_DEFAULT_PSRAM_CLK_IO=30 -CONFIG_DEFAULT_PSRAM_CS_IO=26 -# end of PSRAM clock and cs IO for ESP32S2 - -# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set -# CONFIG_SPIRAM_RODATA is not set -# CONFIG_SPIRAM_SPEED_80M is not set -CONFIG_SPIRAM_SPEED_40M=y -# CONFIG_SPIRAM_SPEED_26M is not set -# CONFIG_SPIRAM_SPEED_20M is not set -CONFIG_SPIRAM=y -CONFIG_SPIRAM_BOOT_INIT=y -# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set -CONFIG_SPIRAM_USE_MEMMAP=y -# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set -# CONFIG_SPIRAM_USE_MALLOC is not set -CONFIG_SPIRAM_MEMTEST=y -# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set -# end of SPI RAM config diff --git a/ports/esp32s2/boards/adafruit_magtag/board.c b/ports/esp32s2/boards/adafruit_magtag/board.c new file mode 100644 index 000000000..9f708874b --- /dev/null +++ b/ports/esp32s2/boards/adafruit_magtag/board.c @@ -0,0 +1,47 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" +#include "shared-bindings/microcontroller/Pin.h" + +void board_init(void) { + // USB + common_hal_never_reset_pin(&pin_GPIO19); + common_hal_never_reset_pin(&pin_GPIO20); + + // Debug UART + common_hal_never_reset_pin(&pin_GPIO43); + common_hal_never_reset_pin(&pin_GPIO44); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.h b/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.h new file mode 100644 index 000000000..be376e5a9 --- /dev/null +++ b/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.h @@ -0,0 +1,45 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +//Micropython setup + +#define MICROPY_HW_BOARD_NAME "MagTag" +#define MICROPY_HW_MCU_NAME "ESP32S2" + +#define MICROPY_HW_NEOPIXEL (&pin_GPIO1) + +#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) + +#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n") + +#define AUTORESET_DELAY_MS 500 + +#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34) +#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) + +#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) +#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) diff --git a/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.mk b/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.mk new file mode 100644 index 000000000..0a141cbe3 --- /dev/null +++ b/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.mk @@ -0,0 +1,17 @@ +USB_VID = 0x239A +USB_PID = 0x80E6 +USB_PRODUCT = "MagTag" +USB_MANUFACTURER = "Adafruit" + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = MPZ + +# The default queue depth of 16 overflows on release builds, +# so increase it to 32. +CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32 + +CIRCUITPY_ESP_FLASH_MODE=dio +CIRCUITPY_ESP_FLASH_FREQ=40m +CIRCUITPY_ESP_FLASH_SIZE=4MB + +CIRCUITPY_MODULE=wrover diff --git a/ports/esp32s2/boards/adafruit_magtag/pins.c b/ports/esp32s2/boards/adafruit_magtag/pins.c new file mode 100644 index 000000000..65bc3fb53 --- /dev/null +++ b/ports/esp32s2/boards/adafruit_magtag/pins.c @@ -0,0 +1,41 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_AD1), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) }, + + { MP_ROM_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_GPIO17) }, + { MP_ROM_QSTR(MP_QSTR_SPEAKER_ENABLE), MP_ROM_PTR(&pin_GPIO16) }, + + { MP_ROM_QSTR(MP_QSTR_EPD_BUSY), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_EPD_RESET), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_EPD_DC), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_EPD_CS), MP_ROM_PTR(&pin_GPIO8) }, + + { MP_ROM_QSTR(MP_QSTR_BUTTON_A), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_B), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_C), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_D), MP_ROM_PTR(&pin_GPIO11) }, + + { MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO3) }, + + { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO4) }, + + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO34) }, + + { MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO37) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO21) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO1) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/adafruit_magtag/sdkconfig b/ports/esp32s2/boards/adafruit_magtag/sdkconfig new file mode 100644 index 000000000..9d8bbde96 --- /dev/null +++ b/ports/esp32s2/boards/adafruit_magtag/sdkconfig @@ -0,0 +1,33 @@ +CONFIG_ESP32S2_SPIRAM_SUPPORT=y + +# +# SPI RAM config +# +# CONFIG_SPIRAM_TYPE_AUTO is not set +CONFIG_SPIRAM_TYPE_ESPPSRAM16=y +# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set +# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set +CONFIG_SPIRAM_SIZE=2097152 + +# +# PSRAM clock and cs IO for ESP32S2 +# +CONFIG_DEFAULT_PSRAM_CLK_IO=30 +CONFIG_DEFAULT_PSRAM_CS_IO=26 +# end of PSRAM clock and cs IO for ESP32S2 + +# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set +# CONFIG_SPIRAM_RODATA is not set +# CONFIG_SPIRAM_SPEED_80M is not set +CONFIG_SPIRAM_SPEED_40M=y +# CONFIG_SPIRAM_SPEED_26M is not set +# CONFIG_SPIRAM_SPEED_20M is not set +CONFIG_SPIRAM=y +CONFIG_SPIRAM_BOOT_INIT=y +# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set +CONFIG_SPIRAM_USE_MEMMAP=y +# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set +# CONFIG_SPIRAM_USE_MALLOC is not set +CONFIG_SPIRAM_MEMTEST=y +# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set +# end of SPI RAM config -- cgit v1.2.3 From 9ef23e8659d4ee58e3158c63f690108b411015a1 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Fri, 6 Nov 2020 15:29:58 -0800 Subject: Fix build board list --- .github/workflows/build.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 404d2ea2e..a2e9e92ab 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -421,7 +421,7 @@ jobs: fail-fast: false matrix: board: - - "adafruit_esp32s2_eink_portal" + - "adafruit_magtag" - "adafruit_metro_esp32s2" - "electroniccats_bastwifi" - "espressif_kaluga_1" -- cgit v1.2.3 From 55e0e2c4ba7dfa1d3e2ba84a4af3b4f132ae1a23 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Sun, 8 Nov 2020 11:12:32 +0530 Subject: Update rotaryio implementation --- .../common-hal/rotaryio/IncrementalEncoder.c | 79 +++++++--------------- .../common-hal/rotaryio/IncrementalEncoder.h | 9 ++- 2 files changed, 29 insertions(+), 59 deletions(-) diff --git a/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c b/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c index bbff36374..25529ac72 100644 --- a/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c +++ b/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c @@ -3,7 +3,7 @@ * * The MIT License (MIT) * - * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries + * Copyright (c) 2020 microDev * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -25,29 +25,22 @@ */ #include "common-hal/rotaryio/IncrementalEncoder.h" +#include "common-hal/microcontroller/Pin.h" #include "py/runtime.h" #include "supervisor/shared/translate.h" -#include "driver/pcnt.h" - -static void pcnt_reset(int unit) { - // Initialize PCNT's counter - pcnt_counter_pause(unit); - pcnt_counter_clear(unit); - - // Everything is set up, now go to counting - pcnt_counter_resume(unit); -} +void common_hal_rotaryio_incrementalencoder_construct(rotaryio_incrementalencoder_obj_t* self, + const mcu_pin_obj_t* pin_a, const mcu_pin_obj_t* pin_b) { + claim_pin(pin_a); + claim_pin(pin_b); -static void pcnt_init(int unit, rotaryio_incrementalencoder_obj_t* self) { // Prepare configuration for the PCNT unit - pcnt_config_t pcnt_config = { + const pcnt_config_t pcnt_config = { // Set PCNT input signal and control GPIOs - .pulse_gpio_num = self->pin_a->number, - .ctrl_gpio_num = self->pin_b->number, + .pulse_gpio_num = pin_a->number, + .ctrl_gpio_num = pin_b->number, .channel = PCNT_CHANNEL_0, - .unit = unit, // What to do on the positive / negative edge of pulse input? .pos_mode = PCNT_COUNT_DEC, // Count up on the positive edge .neg_mode = PCNT_COUNT_INC, // Keep the counter value on the negative edge @@ -55,61 +48,39 @@ static void pcnt_init(int unit, rotaryio_incrementalencoder_obj_t* self) { .lctrl_mode = PCNT_MODE_REVERSE, // Reverse counting direction if low .hctrl_mode = PCNT_MODE_KEEP, // Keep the primary counter mode if high }; - // Initialize PCNT unit - pcnt_unit_config(&pcnt_config); - - // Configure channel 1 - pcnt_config.pulse_gpio_num = self->pin_b->number; - pcnt_config.ctrl_gpio_num = self->pin_a->number; - pcnt_config.channel = PCNT_CHANNEL_1; - pcnt_config.pos_mode = PCNT_COUNT_INC; - pcnt_config.neg_mode = PCNT_COUNT_DEC; - pcnt_unit_config(&pcnt_config); - - // Configure and enable the input filter - pcnt_set_filter_value(unit, 100); - pcnt_filter_enable(unit); - - pcnt_reset(unit); -} - -void common_hal_rotaryio_incrementalencoder_construct(rotaryio_incrementalencoder_obj_t* self, - const mcu_pin_obj_t* pin_a, const mcu_pin_obj_t* pin_b) { - claim_pin(pin_a); - claim_pin(pin_b); - - self->pin_a = pin_a; - self->pin_b = pin_b; - self->position = 0; + // Initialize PCNT unit + const int8_t unit = peripherals_pcnt_init(pcnt_config); + if (unit == -1) { + mp_raise_RuntimeError(translate("All PCNT units in use")); + } - pcnt_init(PCNT_UNIT_0, self); + self->pin_a = pin_a->number; + self->pin_b = pin_b->number; + self->unit = (pcnt_unit_t)unit; } bool common_hal_rotaryio_incrementalencoder_deinited(rotaryio_incrementalencoder_obj_t* self) { - return self->pin_a == NULL; + return self->unit == PCNT_UNIT_MAX; } void common_hal_rotaryio_incrementalencoder_deinit(rotaryio_incrementalencoder_obj_t* self) { if (common_hal_rotaryio_incrementalencoder_deinited(self)) { return; } - - reset_pin_number(self->pin_a->number); - self->pin_a = NULL; - - reset_pin_number(self->pin_b->number); - self->pin_b = NULL; + reset_pin_number(self->pin_a); + reset_pin_number(self->pin_b); + peripherals_pcnt_deinit(&self->unit); } mp_int_t common_hal_rotaryio_incrementalencoder_get_position(rotaryio_incrementalencoder_obj_t* self) { - int16_t count = 0; - pcnt_get_counter_value(PCNT_UNIT_0, &count); - return self->position+count; + int16_t count; + pcnt_get_counter_value(self->unit, &count); + return (count/2)+self->position; } void common_hal_rotaryio_incrementalencoder_set_position(rotaryio_incrementalencoder_obj_t* self, mp_int_t new_position) { self->position = new_position; - pcnt_reset(PCNT_UNIT_0); + pcnt_counter_clear(self->unit); } diff --git a/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.h b/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.h index 0cc2830fb..8a717b7b5 100644 --- a/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.h +++ b/ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.h @@ -3,7 +3,7 @@ * * The MIT License (MIT) * - * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries + * Copyright (c) 2020 microDev * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -27,15 +27,14 @@ #ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ROTARYIO_INCREMENTALENCODER_H #define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ROTARYIO_INCREMENTALENCODER_H -#include "common-hal/microcontroller/Pin.h" - #include "py/obj.h" +#include "peripherals/pcnt.h" typedef struct { mp_obj_base_t base; - const mcu_pin_obj_t * pin_a; - const mcu_pin_obj_t * pin_b; + uint8_t pin_a, pin_b; mp_int_t position; + pcnt_unit_t unit; } rotaryio_incrementalencoder_obj_t; #endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ROTARYIO_INCREMENTALENCODER_H -- cgit v1.2.3 From 7ba2c5772ccbe48c5c52d62493f9c899a1d0963a Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Sun, 8 Nov 2020 11:18:05 +0530 Subject: Update license --- ports/esp32s2/common-hal/touchio/TouchIn.c | 2 +- ports/esp32s2/common-hal/touchio/TouchIn.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/common-hal/touchio/TouchIn.c b/ports/esp32s2/common-hal/touchio/TouchIn.c index 3e3e4b551..b44234775 100644 --- a/ports/esp32s2/common-hal/touchio/TouchIn.c +++ b/ports/esp32s2/common-hal/touchio/TouchIn.c @@ -3,7 +3,7 @@ * * The MIT License (MIT) * - * Copyright (c) 2016 Scott Shawcroft for Adafruit Industries + * Copyright (c) 2020 microDev * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal diff --git a/ports/esp32s2/common-hal/touchio/TouchIn.h b/ports/esp32s2/common-hal/touchio/TouchIn.h index 585bb37bf..91de20931 100644 --- a/ports/esp32s2/common-hal/touchio/TouchIn.h +++ b/ports/esp32s2/common-hal/touchio/TouchIn.h @@ -3,7 +3,7 @@ * * The MIT License (MIT) * - * Copyright (c) 2016 Scott Shawcroft + * Copyright (c) 2020 microDev * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal -- cgit v1.2.3 From 5505a3649fe56738321e2138aa918d05d63da6b4 Mon Sep 17 00:00:00 2001 From: Wellington Terumi Uemura Date: Sat, 7 Nov 2020 10:04:39 +0000 Subject: Translated using Weblate (Portuguese (Brazil)) Currently translated at 100.0% (845 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pt_BR/ --- locale/pt_BR.po | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/locale/pt_BR.po b/locale/pt_BR.po index ac5c7a667..99f090dbd 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-10-28 21:45+0000\n" +"PO-Revision-Date: 2020-11-08 10:26+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.3.2-dev\n" +"X-Generator: Weblate 4.3.2\n" #: main.c msgid "" @@ -306,7 +306,7 @@ msgstr "Todos os periféricos I2C estão em uso" #: ports/esp32s2/peripherals/pcnt_handler.c msgid "All PCNT units in use" -msgstr "" +msgstr "Todas as unidades PCNT estão em uso" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c -- cgit v1.2.3 From 9adb77a2d0179f89c7402451f6b25be74629ffbd Mon Sep 17 00:00:00 2001 From: foamyguy Date: Sun, 8 Nov 2020 19:28:46 -0600 Subject: set moved true when unhiding tilegrid --- shared-module/displayio/TileGrid.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/shared-module/displayio/TileGrid.c b/shared-module/displayio/TileGrid.c index e3642107f..e8050a539 100644 --- a/shared-module/displayio/TileGrid.c +++ b/shared-module/displayio/TileGrid.c @@ -83,10 +83,16 @@ bool common_hal_displayio_tilegrid_get_hidden(displayio_tilegrid_t* self) { void common_hal_displayio_tilegrid_set_hidden(displayio_tilegrid_t* self, bool hidden) { self->hidden = hidden; + if(!hidden){ + self->moved = true; + } } void displayio_tilegrid_set_hidden_by_parent(displayio_tilegrid_t *self, bool hidden) { self->hidden_by_parent = hidden; + if(!hidden){ + self->moved = true; + } } bool displayio_tilegrid_get_previous_area(displayio_tilegrid_t *self, displayio_area_t* area) { -- cgit v1.2.3 From d1f15d314bd630b073c70c093053c16ac34131bb Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Mon, 9 Nov 2020 15:03:22 -0800 Subject: Rename to include display details --- .github/workflows/build.yml | 2 +- ports/esp32s2/boards/adafruit_magtag/board.c | 47 ---------------------- .../esp32s2/boards/adafruit_magtag/mpconfigboard.h | 45 --------------------- .../boards/adafruit_magtag/mpconfigboard.mk | 17 -------- ports/esp32s2/boards/adafruit_magtag/pins.c | 41 ------------------- ports/esp32s2/boards/adafruit_magtag/sdkconfig | 33 --------------- .../boards/adafruit_magtag_2.9_grayscale/board.c | 47 ++++++++++++++++++++++ .../adafruit_magtag_2.9_grayscale/mpconfigboard.h | 45 +++++++++++++++++++++ .../adafruit_magtag_2.9_grayscale/mpconfigboard.mk | 17 ++++++++ .../boards/adafruit_magtag_2.9_grayscale/pins.c | 41 +++++++++++++++++++ .../boards/adafruit_magtag_2.9_grayscale/sdkconfig | 33 +++++++++++++++ 11 files changed, 184 insertions(+), 184 deletions(-) delete mode 100644 ports/esp32s2/boards/adafruit_magtag/board.c delete mode 100644 ports/esp32s2/boards/adafruit_magtag/mpconfigboard.h delete mode 100644 ports/esp32s2/boards/adafruit_magtag/mpconfigboard.mk delete mode 100644 ports/esp32s2/boards/adafruit_magtag/pins.c delete mode 100644 ports/esp32s2/boards/adafruit_magtag/sdkconfig create mode 100644 ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c create mode 100644 ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h create mode 100644 ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.mk create mode 100644 ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c create mode 100644 ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/sdkconfig diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index a2e9e92ab..c83f37e6e 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -421,7 +421,7 @@ jobs: fail-fast: false matrix: board: - - "adafruit_magtag" + - "adafruit_magtag_2.9_grayscale" - "adafruit_metro_esp32s2" - "electroniccats_bastwifi" - "espressif_kaluga_1" diff --git a/ports/esp32s2/boards/adafruit_magtag/board.c b/ports/esp32s2/boards/adafruit_magtag/board.c deleted file mode 100644 index 9f708874b..000000000 --- a/ports/esp32s2/boards/adafruit_magtag/board.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "boards/board.h" -#include "mpconfigboard.h" -#include "shared-bindings/microcontroller/Pin.h" - -void board_init(void) { - // USB - common_hal_never_reset_pin(&pin_GPIO19); - common_hal_never_reset_pin(&pin_GPIO20); - - // Debug UART - common_hal_never_reset_pin(&pin_GPIO43); - common_hal_never_reset_pin(&pin_GPIO44); -} - -bool board_requests_safe_mode(void) { - return false; -} - -void reset_board(void) { - -} diff --git a/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.h b/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.h deleted file mode 100644 index be376e5a9..000000000 --- a/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -//Micropython setup - -#define MICROPY_HW_BOARD_NAME "MagTag" -#define MICROPY_HW_MCU_NAME "ESP32S2" - -#define MICROPY_HW_NEOPIXEL (&pin_GPIO1) - -#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) - -#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n") - -#define AUTORESET_DELAY_MS 500 - -#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34) -#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) - -#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) -#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) -#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) diff --git a/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.mk b/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.mk deleted file mode 100644 index 0a141cbe3..000000000 --- a/ports/esp32s2/boards/adafruit_magtag/mpconfigboard.mk +++ /dev/null @@ -1,17 +0,0 @@ -USB_VID = 0x239A -USB_PID = 0x80E6 -USB_PRODUCT = "MagTag" -USB_MANUFACTURER = "Adafruit" - -INTERNAL_FLASH_FILESYSTEM = 1 -LONGINT_IMPL = MPZ - -# The default queue depth of 16 overflows on release builds, -# so increase it to 32. -CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32 - -CIRCUITPY_ESP_FLASH_MODE=dio -CIRCUITPY_ESP_FLASH_FREQ=40m -CIRCUITPY_ESP_FLASH_SIZE=4MB - -CIRCUITPY_MODULE=wrover diff --git a/ports/esp32s2/boards/adafruit_magtag/pins.c b/ports/esp32s2/boards/adafruit_magtag/pins.c deleted file mode 100644 index 65bc3fb53..000000000 --- a/ports/esp32s2/boards/adafruit_magtag/pins.c +++ /dev/null @@ -1,41 +0,0 @@ -#include "shared-bindings/board/__init__.h" - -STATIC const mp_rom_map_elem_t board_global_dict_table[] = { - { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) }, - { MP_ROM_QSTR(MP_QSTR_AD1), MP_ROM_PTR(&pin_GPIO18) }, - { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) }, - - { MP_ROM_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_GPIO17) }, - { MP_ROM_QSTR(MP_QSTR_SPEAKER_ENABLE), MP_ROM_PTR(&pin_GPIO16) }, - - { MP_ROM_QSTR(MP_QSTR_EPD_BUSY), MP_ROM_PTR(&pin_GPIO5) }, - { MP_ROM_QSTR(MP_QSTR_EPD_RESET), MP_ROM_PTR(&pin_GPIO6) }, - { MP_ROM_QSTR(MP_QSTR_EPD_DC), MP_ROM_PTR(&pin_GPIO7) }, - { MP_ROM_QSTR(MP_QSTR_EPD_CS), MP_ROM_PTR(&pin_GPIO8) }, - - { MP_ROM_QSTR(MP_QSTR_BUTTON_A), MP_ROM_PTR(&pin_GPIO15) }, - { MP_ROM_QSTR(MP_QSTR_BUTTON_B), MP_ROM_PTR(&pin_GPIO14) }, - { MP_ROM_QSTR(MP_QSTR_BUTTON_C), MP_ROM_PTR(&pin_GPIO12) }, - { MP_ROM_QSTR(MP_QSTR_BUTTON_D), MP_ROM_PTR(&pin_GPIO11) }, - - { MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO3) }, - - { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO4) }, - { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO4) }, - - { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO33) }, - { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO34) }, - - { MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO8) }, - { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) }, - { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) }, - { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO37) }, - - { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO21) }, - - { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO1) }, - - { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, - { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, -}; -MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/adafruit_magtag/sdkconfig b/ports/esp32s2/boards/adafruit_magtag/sdkconfig deleted file mode 100644 index 9d8bbde96..000000000 --- a/ports/esp32s2/boards/adafruit_magtag/sdkconfig +++ /dev/null @@ -1,33 +0,0 @@ -CONFIG_ESP32S2_SPIRAM_SUPPORT=y - -# -# SPI RAM config -# -# CONFIG_SPIRAM_TYPE_AUTO is not set -CONFIG_SPIRAM_TYPE_ESPPSRAM16=y -# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set -# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set -CONFIG_SPIRAM_SIZE=2097152 - -# -# PSRAM clock and cs IO for ESP32S2 -# -CONFIG_DEFAULT_PSRAM_CLK_IO=30 -CONFIG_DEFAULT_PSRAM_CS_IO=26 -# end of PSRAM clock and cs IO for ESP32S2 - -# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set -# CONFIG_SPIRAM_RODATA is not set -# CONFIG_SPIRAM_SPEED_80M is not set -CONFIG_SPIRAM_SPEED_40M=y -# CONFIG_SPIRAM_SPEED_26M is not set -# CONFIG_SPIRAM_SPEED_20M is not set -CONFIG_SPIRAM=y -CONFIG_SPIRAM_BOOT_INIT=y -# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set -CONFIG_SPIRAM_USE_MEMMAP=y -# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set -# CONFIG_SPIRAM_USE_MALLOC is not set -CONFIG_SPIRAM_MEMTEST=y -# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set -# end of SPI RAM config diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c new file mode 100644 index 000000000..9f708874b --- /dev/null +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c @@ -0,0 +1,47 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" +#include "shared-bindings/microcontroller/Pin.h" + +void board_init(void) { + // USB + common_hal_never_reset_pin(&pin_GPIO19); + common_hal_never_reset_pin(&pin_GPIO20); + + // Debug UART + common_hal_never_reset_pin(&pin_GPIO43); + common_hal_never_reset_pin(&pin_GPIO44); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h new file mode 100644 index 000000000..be376e5a9 --- /dev/null +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h @@ -0,0 +1,45 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +//Micropython setup + +#define MICROPY_HW_BOARD_NAME "MagTag" +#define MICROPY_HW_MCU_NAME "ESP32S2" + +#define MICROPY_HW_NEOPIXEL (&pin_GPIO1) + +#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) + +#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n") + +#define AUTORESET_DELAY_MS 500 + +#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34) +#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) + +#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) +#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.mk b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.mk new file mode 100644 index 000000000..0a141cbe3 --- /dev/null +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.mk @@ -0,0 +1,17 @@ +USB_VID = 0x239A +USB_PID = 0x80E6 +USB_PRODUCT = "MagTag" +USB_MANUFACTURER = "Adafruit" + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = MPZ + +# The default queue depth of 16 overflows on release builds, +# so increase it to 32. +CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32 + +CIRCUITPY_ESP_FLASH_MODE=dio +CIRCUITPY_ESP_FLASH_FREQ=40m +CIRCUITPY_ESP_FLASH_SIZE=4MB + +CIRCUITPY_MODULE=wrover diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c new file mode 100644 index 000000000..65bc3fb53 --- /dev/null +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c @@ -0,0 +1,41 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_AD1), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) }, + + { MP_ROM_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_GPIO17) }, + { MP_ROM_QSTR(MP_QSTR_SPEAKER_ENABLE), MP_ROM_PTR(&pin_GPIO16) }, + + { MP_ROM_QSTR(MP_QSTR_EPD_BUSY), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_EPD_RESET), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_EPD_DC), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_EPD_CS), MP_ROM_PTR(&pin_GPIO8) }, + + { MP_ROM_QSTR(MP_QSTR_BUTTON_A), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_B), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_C), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_D), MP_ROM_PTR(&pin_GPIO11) }, + + { MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO3) }, + + { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO4) }, + + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO33) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO34) }, + + { MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO37) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO21) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO1) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/sdkconfig b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/sdkconfig new file mode 100644 index 000000000..9d8bbde96 --- /dev/null +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/sdkconfig @@ -0,0 +1,33 @@ +CONFIG_ESP32S2_SPIRAM_SUPPORT=y + +# +# SPI RAM config +# +# CONFIG_SPIRAM_TYPE_AUTO is not set +CONFIG_SPIRAM_TYPE_ESPPSRAM16=y +# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set +# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set +CONFIG_SPIRAM_SIZE=2097152 + +# +# PSRAM clock and cs IO for ESP32S2 +# +CONFIG_DEFAULT_PSRAM_CLK_IO=30 +CONFIG_DEFAULT_PSRAM_CS_IO=26 +# end of PSRAM clock and cs IO for ESP32S2 + +# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set +# CONFIG_SPIRAM_RODATA is not set +# CONFIG_SPIRAM_SPEED_80M is not set +CONFIG_SPIRAM_SPEED_40M=y +# CONFIG_SPIRAM_SPEED_26M is not set +# CONFIG_SPIRAM_SPEED_20M is not set +CONFIG_SPIRAM=y +CONFIG_SPIRAM_BOOT_INIT=y +# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set +CONFIG_SPIRAM_USE_MEMMAP=y +# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set +# CONFIG_SPIRAM_USE_MALLOC is not set +CONFIG_SPIRAM_MEMTEST=y +# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set +# end of SPI RAM config -- cgit v1.2.3 From 46c9b28dd880d4e2e2764ab67f64356b175f5f98 Mon Sep 17 00:00:00 2001 From: foamyguy Date: Mon, 9 Nov 2020 18:14:31 -0600 Subject: use full_change instead of moved --- shared-module/displayio/TileGrid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/shared-module/displayio/TileGrid.c b/shared-module/displayio/TileGrid.c index e8050a539..19ea10e55 100644 --- a/shared-module/displayio/TileGrid.c +++ b/shared-module/displayio/TileGrid.c @@ -84,14 +84,14 @@ bool common_hal_displayio_tilegrid_get_hidden(displayio_tilegrid_t* self) { void common_hal_displayio_tilegrid_set_hidden(displayio_tilegrid_t* self, bool hidden) { self->hidden = hidden; if(!hidden){ - self->moved = true; + self->full_change = true; } } void displayio_tilegrid_set_hidden_by_parent(displayio_tilegrid_t *self, bool hidden) { self->hidden_by_parent = hidden; if(!hidden){ - self->moved = true; + self->full_change = true; } } -- cgit v1.2.3 From 6c59836c5db03744d7dbef01c2323989d13ef02a Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Tue, 10 Nov 2020 16:32:46 +0530 Subject: watchdog implementation for esp32s2 --- locale/circuitpython.pot | 15 +++- .../esp32s2/common-hal/microcontroller/__init__.c | 11 +++ ports/esp32s2/common-hal/watchdog/WatchDogMode.c | 1 + ports/esp32s2/common-hal/watchdog/WatchDogTimer.c | 86 ++++++++++++++++++++++ ports/esp32s2/common-hal/watchdog/WatchDogTimer.h | 44 +++++++++++ ports/esp32s2/common-hal/watchdog/__init__.c | 1 + ports/esp32s2/mpconfigport.mk | 1 + 7 files changed, 157 insertions(+), 2 deletions(-) create mode 100644 ports/esp32s2/common-hal/watchdog/WatchDogMode.c create mode 100644 ports/esp32s2/common-hal/watchdog/WatchDogTimer.c create mode 100644 ports/esp32s2/common-hal/watchdog/WatchDogTimer.h create mode 100644 ports/esp32s2/common-hal/watchdog/__init__.c diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index b4445abfb..7a39e9a32 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -296,7 +296,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -992,6 +993,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3201,6 +3206,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3416,6 +3422,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3599,6 +3606,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/ports/esp32s2/common-hal/microcontroller/__init__.c b/ports/esp32s2/common-hal/microcontroller/__init__.c index 6b2e18673..e5cfc7eef 100644 --- a/ports/esp32s2/common-hal/microcontroller/__init__.c +++ b/ports/esp32s2/common-hal/microcontroller/__init__.c @@ -85,6 +85,17 @@ const mcu_processor_obj_t common_hal_mcu_processor_obj = { }, }; +#if CIRCUITPY_WATCHDOG +// The singleton watchdog.WatchDogTimer object. +watchdog_watchdogtimer_obj_t common_hal_mcu_watchdogtimer_obj = { + .base = { + .type = &watchdog_watchdogtimer_type, + }, + .timeout = 0.0f, + .mode = WATCHDOGMODE_NONE, +}; +#endif + // This maps MCU pin names to pin objects. STATIC const mp_rom_map_elem_t mcu_pin_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_GPIO0), MP_ROM_PTR(&pin_GPIO0) }, diff --git a/ports/esp32s2/common-hal/watchdog/WatchDogMode.c b/ports/esp32s2/common-hal/watchdog/WatchDogMode.c new file mode 100644 index 000000000..fc4e0e008 --- /dev/null +++ b/ports/esp32s2/common-hal/watchdog/WatchDogMode.c @@ -0,0 +1 @@ +// No watchdog module functions. diff --git a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c new file mode 100644 index 000000000..59b9dafcf --- /dev/null +++ b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c @@ -0,0 +1,86 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "py/runtime.h" +#include "common-hal/watchdog/WatchDogTimer.h" + +#include "shared-bindings/microcontroller/__init__.h" + +#include "esp_task_wdt.h" + +void esp_task_wdt_isr_user_handler(void) { + +} + +void common_hal_watchdog_feed(watchdog_watchdogtimer_obj_t *self) { + if (esp_task_wdt_reset() != ESP_OK) { + mp_raise_RuntimeError(translate("watchdog not initialized")); + } +} + +void common_hal_watchdog_deinit(watchdog_watchdogtimer_obj_t *self) { + if (esp_task_wdt_deinit() == ESP_OK) { + self->mode = WATCHDOGMODE_NONE; + } +} + +void watchdog_reset(void) { + common_hal_watchdog_deinit(&common_hal_mcu_watchdogtimer_obj); +} + +static void wdt_config(watchdog_watchdogtimer_obj_t *self) { + // enable panic hanler in WATCHDOGMODE_RESET mode + // initialize Task Watchdog Timer (TWDT) + if (esp_task_wdt_init((uint32_t)self->timeout, (self->mode == WATCHDOGMODE_RESET)) != ESP_OK) { + mp_raise_RuntimeError(translate("Initialization failed due to lack of memory")); + } + esp_task_wdt_add(NULL); +} + +mp_float_t common_hal_watchdog_get_timeout(watchdog_watchdogtimer_obj_t *self) { + return self->timeout; +} + +void common_hal_watchdog_set_timeout(watchdog_watchdogtimer_obj_t *self, mp_float_t new_timeout) { + if ((uint64_t)new_timeout > UINT32_MAX) { + mp_raise_ValueError(translate("timeout duration exceeded the maximum supported value")); + } + if ((uint32_t)self->timeout != (uint32_t)new_timeout) { + self->timeout = new_timeout; + wdt_config(self); + } +} + +watchdog_watchdogmode_t common_hal_watchdog_get_mode(watchdog_watchdogtimer_obj_t *self) { + return self->mode; +} + +void common_hal_watchdog_set_mode(watchdog_watchdogtimer_obj_t *self, watchdog_watchdogmode_t new_mode) { + if (self->mode != new_mode) { + self->mode = new_mode; + wdt_config(self); + } +} diff --git a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h new file mode 100644 index 000000000..05e0e954d --- /dev/null +++ b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h @@ -0,0 +1,44 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_WATCHDOG_WATCHDOGTIMER_H +#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_WATCHDOG_WATCHDOGTIMER_H + +#include "py/obj.h" +#include "shared-bindings/watchdog/WatchDogMode.h" +#include "shared-bindings/watchdog/WatchDogTimer.h" + +struct _watchdog_watchdogtimer_obj_t { + mp_obj_base_t base; + mp_float_t timeout; + watchdog_watchdogmode_t mode; +}; + +// This needs to be called in order to disable the watchdog if it's set to +// "RAISE". If set to "RESET", then the watchdog cannot be reset. +void watchdog_reset(void); + +#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_WATCHDOG_WATCHDOGTIMER_H diff --git a/ports/esp32s2/common-hal/watchdog/__init__.c b/ports/esp32s2/common-hal/watchdog/__init__.c new file mode 100644 index 000000000..fc4e0e008 --- /dev/null +++ b/ports/esp32s2/common-hal/watchdog/__init__.c @@ -0,0 +1 @@ +// No watchdog module functions. diff --git a/ports/esp32s2/mpconfigport.mk b/ports/esp32s2/mpconfigport.mk index 4579b95ab..335d2caf7 100644 --- a/ports/esp32s2/mpconfigport.mk +++ b/ports/esp32s2/mpconfigport.mk @@ -25,6 +25,7 @@ CIRCUITPY_NVM = 0 # We don't have enough endpoints to include MIDI. CIRCUITPY_USB_MIDI = 0 CIRCUITPY_WIFI = 1 +CIRCUITPY_WATCHDOG ?= 1 CIRCUITPY_ESPIDF = 1 ifndef CIRCUITPY_TOUCHIO_USE_NATIVE -- cgit v1.2.3 From 2d8ebfcf633a0e744e49fe14cc0025d8d7d348fc Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 10 Nov 2020 10:41:10 -0600 Subject: esp32s2: Correct port_stack_get_top() Closes #3649 --- ports/esp32s2/supervisor/port.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 0b9c03f74..a25bcce00 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -148,7 +148,18 @@ uint32_t *port_stack_get_limit(void) { } uint32_t *port_stack_get_top(void) { - return port_stack_get_limit() + CONFIG_ESP_MAIN_TASK_STACK_SIZE / (sizeof(uint32_t) / sizeof(StackType_t)); + // The sizeof-arithmetic is so that the pointer arithmetic is done on units + // of uint32_t instead of units of StackType_t. StackType_t is an alias + // for a byte sized type. + // + // The main stack is bigger than CONFIG_ESP_MAIN_TASK_STACK_SIZE -- an + // "extra" size is added to it (TASK_EXTRA_STACK_SIZE). This total size is + // available as ESP_TASK_MAIN_STACK. Presumably TASK_EXTRA_STACK_SIZE is + // additional stack that can be used by the esp-idf runtime. But what's + // important for us is that some very outermost stack frames, such as + // pyexec_friendly_repl, could lie inside the "extra" area and be invisible + // to the garbage collector. + return port_stack_get_limit() + ESP_TASK_MAIN_STACK / (sizeof(uint32_t) / sizeof(StackType_t)); } supervisor_allocation _fixed_stack; -- cgit v1.2.3 From 44425b8d94d25709cb874b35f74a31da95bbfa38 Mon Sep 17 00:00:00 2001 From: root Date: Tue, 10 Nov 2020 11:32:59 -0600 Subject: Requested review changes made --- ports/esp32s2/supervisor/port.c | 13 ++++++------- ports/esp32s2/supervisor/usb.c | 8 +++++--- 2 files changed, 11 insertions(+), 10 deletions(-) diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 46de63627..4b9a4f7ef 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -55,8 +55,7 @@ uint32_t* heap; uint32_t heap_size; -extern TaskHandle_t xTaskToNotify; - +extern TaskHandle_t sleeping_circuitpython_task; STATIC esp_timer_handle_t _tick_timer; extern void esp_restart(void) NORETURN; @@ -191,23 +190,23 @@ void port_disable_tick(void) { } TickType_t sleep_time_duration; -uint32_t NotifyValue = 0; -BaseType_t notify_wait = 0; void port_interrupt_after_ticks(uint32_t ticks) { sleep_time_duration = (ticks * 100)/1024; - xTaskToNotify = xTaskGetCurrentTaskHandle(); + sleeping_circuitpython_task = xTaskGetCurrentTaskHandle(); } void port_sleep_until_interrupt(void) { + uint32_t NotifyValue = 0; + if (sleep_time_duration == 0) { return; } - notify_wait = xTaskNotifyWait(0x01,0x01,&NotifyValue, + xTaskNotifyWait(0x01,0x01,&NotifyValue, sleep_time_duration ); if (NotifyValue == 1) { - xTaskToNotify = NULL; + sleeping_circuitpython_task = NULL; mp_handle_pending(); } } diff --git a/ports/esp32s2/supervisor/usb.c b/ports/esp32s2/supervisor/usb.c index 86186d36b..2bfcdfb12 100644 --- a/ports/esp32s2/supervisor/usb.c +++ b/ports/esp32s2/supervisor/usb.c @@ -52,7 +52,7 @@ StackType_t usb_device_stack[USBD_STACK_SIZE]; StaticTask_t usb_device_taskdef; -TaskHandle_t xTaskToNotify = NULL; +TaskHandle_t sleeping_circuitpython_task = NULL; // USB Device Driver task // This top level thread process all usb events and invoke callbacks @@ -129,8 +129,10 @@ void tud_cdc_rx_wanted_cb(uint8_t itf, char wanted_char) if (mp_interrupt_char == wanted_char) { tud_cdc_read_flush(); // flush read fifo mp_keyboard_interrupt(); - if (xTaskToNotify != NULL) { - xTaskNotifyGive(xTaskToNotify); + // CircuitPython's VM is run in a separate FreeRTOS task from TinyUSB. + // So, we must notify the other task when a CTRL-C is received. + if (sleeping_circuitpython_task != NULL) { + xTaskNotifyGive(sleeping_circuitpython_task); } } } -- cgit v1.2.3 From fe7ed999393e369243319c48453cc2f7add3e7f0 Mon Sep 17 00:00:00 2001 From: root Date: Tue, 10 Nov 2020 12:45:39 -0600 Subject: Split out extern declare to ports/esp32s2/supervisor/esp_port.h --- ports/esp32s2/supervisor/esp_port.h | 35 +++++++++++++++++++++++++++++++++++ ports/esp32s2/supervisor/port.c | 3 ++- 2 files changed, 37 insertions(+), 1 deletion(-) create mode 100644 ports/esp32s2/supervisor/esp_port.h diff --git a/ports/esp32s2/supervisor/esp_port.h b/ports/esp32s2/supervisor/esp_port.h new file mode 100644 index 000000000..1164666cd --- /dev/null +++ b/ports/esp32s2/supervisor/esp_port.h @@ -0,0 +1,35 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_SUPERVISOR_PORT_H +#define MICROPY_INCLUDED_ESP32S2_SUPERVISOR_PORT_H + +#include "freertos/FreeRTOS.h" +#include "freertos/task.h" + +extern TaskHandle_t sleeping_circuitpython_task; + +#endif // MICROPY_INCLUDED_ESP32S2_SUPERVISOR_PORT_H diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 4b9a4f7ef..0ac2236d3 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -31,6 +31,7 @@ #include "boards/board.h" #include "modules/module.h" #include "py/runtime.h" +#include "supervisor/esp_port.h" #include "freertos/FreeRTOS.h" #include "freertos/task.h" @@ -55,7 +56,7 @@ uint32_t* heap; uint32_t heap_size; -extern TaskHandle_t sleeping_circuitpython_task; + STATIC esp_timer_handle_t _tick_timer; extern void esp_restart(void) NORETURN; -- cgit v1.2.3 From 10e8b8cf456b36b6e1e1582601a3fc437727cec5 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Wed, 11 Nov 2020 00:24:01 +0530 Subject: move port specific check --- ports/nrf/common-hal/watchdog/WatchDogTimer.c | 3 +++ shared-bindings/watchdog/WatchDogTimer.c | 7 +------ 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/ports/nrf/common-hal/watchdog/WatchDogTimer.c b/ports/nrf/common-hal/watchdog/WatchDogTimer.c index bec0ac473..539b43e76 100644 --- a/ports/nrf/common-hal/watchdog/WatchDogTimer.c +++ b/ports/nrf/common-hal/watchdog/WatchDogTimer.c @@ -93,6 +93,9 @@ void common_hal_watchdog_feed(watchdog_watchdogtimer_obj_t *self) { } void common_hal_watchdog_deinit(watchdog_watchdogtimer_obj_t *self) { + if (self->mode == WATCHDOGMODE_RESET) { + mp_raise_NotImplementedError(translate("WatchDogTimer cannot be deinitialized once mode is set to RESET")); + } if (timer) { timer_free(); } diff --git a/shared-bindings/watchdog/WatchDogTimer.c b/shared-bindings/watchdog/WatchDogTimer.c index 09219f710..575021a21 100644 --- a/shared-bindings/watchdog/WatchDogTimer.c +++ b/shared-bindings/watchdog/WatchDogTimer.c @@ -66,6 +66,7 @@ STATIC mp_obj_t watchdog_watchdogtimer_feed(mp_obj_t self_in) { if (current_mode == WATCHDOGMODE_NONE) { mp_raise_ValueError(translate("WatchDogTimer is not currently running")); } + common_hal_watchdog_feed(self); return mp_const_none; } @@ -78,12 +79,6 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(watchdog_watchdogtimer_feed_obj, watchdog_watch //| STATIC mp_obj_t watchdog_watchdogtimer_deinit(mp_obj_t self_in) { watchdog_watchdogtimer_obj_t *self = MP_OBJ_TO_PTR(self_in); - watchdog_watchdogmode_t current_mode = common_hal_watchdog_get_mode(self); - - if (current_mode == WATCHDOGMODE_RESET) { - mp_raise_NotImplementedError(translate("WatchDogTimer cannot be deinitialized once mode is set to RESET")); - } - common_hal_watchdog_deinit(self); return mp_const_none; } -- cgit v1.2.3 From 1192eebcdf3fbfa383a868d3a349535858e3e0e3 Mon Sep 17 00:00:00 2001 From: foamyguy Date: Tue, 10 Nov 2020 14:12:44 -0600 Subject: adding spi and i2c to board for um feather s2 --- ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h index 5a885f29c..b320fdc8d 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h @@ -37,3 +37,10 @@ // #define MICROPY_HW_APA102_MOSI (&pin_GPIO40) // #define MICROPY_HW_APA102_SCK (&pin_GPIO45) + +#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9) +#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8) + +#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) +#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) \ No newline at end of file -- cgit v1.2.3 From b8f83643b532cfbd76b93f8a88dcf599f6e43c68 Mon Sep 17 00:00:00 2001 From: Szymon Jakubiak Date: Tue, 10 Nov 2020 20:52:38 +0000 Subject: Translated using Weblate (Polish) Currently translated at 70.7% (598 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pl/ --- locale/pl.po | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/locale/pl.po b/locale/pl.po index 54ef4d918..e3081544c 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -7,8 +7,8 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-09-29 01:39+0000\n" -"Last-Translator: Maciej Stankiewicz \n" +"PO-Revision-Date: 2020-11-10 20:52+0000\n" +"Last-Translator: Szymon Jakubiak \n" "Language-Team: pl\n" "Language: pl\n" "MIME-Version: 1.0\n" @@ -16,7 +16,7 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " "|| n%100>=20) ? 1 : 2;\n" -"X-Generator: Weblate 4.3-dev\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -76,7 +76,7 @@ msgstr "%q poza zakresem" #: py/obj.c msgid "%q indices must be integers, not %q" -msgstr "" +msgstr "%q indeksy muszą być liczbami typu int, a nie %q" #: shared-bindings/vectorio/Polygon.c msgid "%q list must be a list" @@ -104,7 +104,7 @@ msgstr "%q poza zakresem" #: ports/atmel-samd/common-hal/microcontroller/Pin.c msgid "%q pin invalid" -msgstr "" +msgstr "%q nieprawidłowy pin" #: shared-bindings/fontio/BuiltinFont.c msgid "%q should be an int" -- cgit v1.2.3 From b9294818da33853088957d913ef497db92584c18 Mon Sep 17 00:00:00 2001 From: Maciej Stankiewicz Date: Tue, 10 Nov 2020 20:50:02 +0000 Subject: Translated using Weblate (Polish) Currently translated at 70.7% (598 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pl/ --- locale/pl.po | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/locale/pl.po b/locale/pl.po index e3081544c..ae532a73f 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -8,7 +8,7 @@ msgstr "" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-11-10 20:52+0000\n" -"Last-Translator: Szymon Jakubiak \n" +"Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" "Language: pl\n" "MIME-Version: 1.0\n" @@ -1206,7 +1206,7 @@ msgstr "" #: shared-module/displayio/Group.c msgid "Layer must be a Group or TileGrid subclass." -msgstr "Layer musi dziedziczyć z Group albo TileGrid" +msgstr "Layer musi dziedziczyć z Group albo TileGrid." #: py/objslice.c msgid "Length must be an int" -- cgit v1.2.3 From a1276be482e46c08f4ad189f9c22ee724d9d82de Mon Sep 17 00:00:00 2001 From: Maciej Stankiewicz Date: Tue, 10 Nov 2020 21:06:44 +0000 Subject: Translated using Weblate (Polish) Currently translated at 71.5% (605 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pl/ --- locale/pl.po | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/locale/pl.po b/locale/pl.po index ae532a73f..fbae67695 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-10 20:52+0000\n" +"PO-Revision-Date: 2020-11-10 21:10+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" "Language: pl\n" @@ -104,7 +104,7 @@ msgstr "%q poza zakresem" #: ports/atmel-samd/common-hal/microcontroller/Pin.c msgid "%q pin invalid" -msgstr "%q nieprawidłowy pin" +msgstr "nieprawidłowy pin %q" #: shared-bindings/fontio/BuiltinFont.c msgid "%q should be an int" @@ -254,7 +254,7 @@ msgstr "'return' poza funkcją" #: py/compile.c msgid "'yield from' inside async function" -msgstr "" +msgstr "'yield from' wewnątrz funkcji asynchronicznej" #: py/compile.c msgid "'yield' outside function" @@ -283,7 +283,7 @@ msgstr "Kanał przerwań sprzętowych w użyciu" #: ports/esp32s2/common-hal/analogio/AnalogIn.c msgid "ADC2 is being used by WiFi" -msgstr "" +msgstr "ADC2 jest używany przez WiFi" #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format @@ -1033,7 +1033,7 @@ msgstr "Błąd wewnętrzny #%d" #: shared-bindings/sdioio/SDCard.c msgid "Invalid %q" -msgstr "" +msgstr "Nieprawidłowe %q" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c @@ -1107,7 +1107,7 @@ msgstr "Zła wielkość fragmentu formatu" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "Invalid frequency" -msgstr "" +msgstr "Nieprawidłowa częstotliwość" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" @@ -1344,7 +1344,7 @@ msgstr "" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more channels available" -msgstr "" +msgstr "Brak dostępnych kanałów" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more timers available" @@ -1436,7 +1436,7 @@ msgstr "" #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" -msgstr "" +msgstr "W danym momencie przezroczysty może być tylko jeden kolor" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" @@ -1505,7 +1505,7 @@ msgstr "Oraz moduły w systemie plików\n" #: shared-module/vectorio/Polygon.c msgid "Polygon needs at least 3 points" -msgstr "" +msgstr "Wielokąt musi mieć co najmniej 3 punkty" #: ports/esp32s2/common-hal/pulseio/PulseOut.c msgid "" -- cgit v1.2.3 From 8373146c56707102626e6d51d98bd87cdd43ba27 Mon Sep 17 00:00:00 2001 From: foamyguy Date: Tue, 10 Nov 2020 15:29:17 -0600 Subject: newline end of file --- ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h index b320fdc8d..ec49fcadf 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h @@ -43,4 +43,4 @@ #define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) #define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) -#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) \ No newline at end of file +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) -- cgit v1.2.3 From 9da99675b162742c0ecbd0995ce35e62204be3b1 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Tue, 10 Nov 2020 16:44:09 -0800 Subject: Correct display sequence format docs --- shared-bindings/displayio/Display.c | 22 ++++++++++++---------- shared-bindings/displayio/EPaperDisplay.c | 11 ++++++----- 2 files changed, 18 insertions(+), 15 deletions(-) diff --git a/shared-bindings/displayio/Display.c b/shared-bindings/displayio/Display.c index 1ed59f233..8d1a888fe 100644 --- a/shared-bindings/displayio/Display.c +++ b/shared-bindings/displayio/Display.c @@ -58,24 +58,26 @@ //| r"""Create a Display object on the given display bus (`FourWire`, `ParallelBus` or `I2CDisplay`). //| //| The ``init_sequence`` is bitpacked to minimize the ram impact. Every command begins with a -//| command byte followed by a byte to determine the parameter count and if a delay is need after. -//| When the top bit of the second byte is 1, the next byte will be the delay time in milliseconds. -//| The remaining 7 bits are the parameter count excluding any delay byte. The third through final -//| bytes are the remaining command parameters. The next byte will begin a new command definition. -//| Here is a portion of ILI9341 init code: +//| command byte followed by a byte to determine the parameter count and delay. When the top bit +//| of the second byte is 1 (0x80), a delay will occur after the command parameters are sent. +//| The remaining 7 bits are the parameter count excluding any delay byte. The bytes following +//| are the parameters. When the delay bit is set, a single byte after the parameters specifies +//| the delay duration in milliseconds. The value 0xff will lead to an extra long 500 ms delay +//| instead of 255 ms. The next byte will begin a new command definition. +//| Here is an example: //| //| .. code-block:: python //| //| init_sequence = (b"\xe1\x0f\x00\x0E\x14\x03\x11\x07\x31\xC1\x48\x08\x0F\x0C\x31\x36\x0F" # Set Gamma //| b"\x11\x80\x78"# Exit Sleep then delay 0x78 (120ms) -//| b"\x29\x80\x78"# Display on then delay 0x78 (120ms) +//| b"\x29\x81\xaa\x78"# Display on then delay 0x78 (120ms) //| ) //| display = displayio.Display(display_bus, init_sequence, width=320, height=240) //| -//| The first command is 0xe1 with 15 (0xf) parameters following. The second and third are 0x11 and -//| 0x29 respectively with delays (0x80) of 120ms (0x78) and no parameters. Multiple byte literals -//| (b"") are merged together on load. The parens are needed to allow byte literals on subsequent -//| lines. +//| The first command is 0xe1 with 15 (0xf) parameters following. The second is 0x11 with 0 +//| parameters and a 120ms (0x78) delay. The third command is 0x29 with one parameter 0xaa and a +//| 120ms delay (0x78). Multiple byte literals (b"") are merged together on load. The parens +//| are needed to allow byte literals on subsequent lines. //| //| The initialization sequence should always leave the display memory access inline with the scan //| of the display to minimize tearing artifacts. diff --git a/shared-bindings/displayio/EPaperDisplay.c b/shared-bindings/displayio/EPaperDisplay.c index e0326d9c8..8518e3714 100644 --- a/shared-bindings/displayio/EPaperDisplay.c +++ b/shared-bindings/displayio/EPaperDisplay.c @@ -65,11 +65,12 @@ //| """Create a EPaperDisplay object on the given display bus (`displayio.FourWire` or `displayio.ParallelBus`). //| //| The ``start_sequence`` and ``stop_sequence`` are bitpacked to minimize the ram impact. Every -//| command begins with a command byte followed by a byte to determine the parameter count and if -//| a delay is need after. When the top bit of the second byte is 1, the next byte will be the -//| delay time in milliseconds. The remaining 7 bits are the parameter count excluding any delay -//| byte. The third through final bytes are the remaining command parameters. The next byte will -//| begin a new command definition. +//| command begins with a command byte followed by a byte to determine the parameter count and +//| delay. When the top bit of the second byte is 1 (0x80), a delay will occur after the command +//| parameters are sent. The remaining 7 bits are the parameter count excluding any delay +//| byte. The bytes following are the parameters. When the delay bit is set, a single byte after +//| the parameters specifies the delay duration in milliseconds. The value 0xff will lead to an +//| extra long 500 ms delay instead of 255 ms. The next byte will begin a new command definition. //| //| :param display_bus: The bus that the display is connected to //| :type _DisplayBus: displayio.FourWire or displayio.ParallelBus -- cgit v1.2.3 From f9842566d8c5fe88cda2e153f1beb897aaca993a Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Wed, 11 Nov 2020 10:22:48 +0530 Subject: Add default pin definitions --- ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h index b87b5dfa0..272ab20fa 100644 --- a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +++ b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h @@ -25,7 +25,6 @@ */ //Micropython setup - #define MICROPY_HW_BOARD_NAME "microS2" #define MICROPY_HW_MCU_NAME "ESP32S2" @@ -33,8 +32,20 @@ #define MICROPY_HW_BUTTON (&pin_GPIO0) #define MICROPY_HW_NEOPIXEL (&pin_GPIO33) +// Default bus pins +#define DEFAULT_I2C_BUS_SCL (&pin_GPIO1) +#define DEFAULT_I2C_BUS_SDA (&pin_GPIO2) + +#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) +#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) + +#define DEFAULT_UART_BUS_TX (&pin_GPIO43) +#define DEFAULT_UART_BUS_RX (&pin_GPIO44) + #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) +// Explanation of how a user got into safe mode. #define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n") #define AUTORESET_DELAY_MS 500 -- cgit v1.2.3 From 118ca7cff44bc3aa50e57915e691e1b8c2f4e563 Mon Sep 17 00:00:00 2001 From: foamyguy Date: Wed, 11 Nov 2020 06:56:57 -0600 Subject: adding default uart pins --- ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h index ec49fcadf..b68a31b9e 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h @@ -44,3 +44,6 @@ #define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) #define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) #define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) + +#define DEFAULT_UART_BUS_RX (&pin_GPIO44) +#define DEFAULT_UART_BUS_TX (&pin_GPIO43) -- cgit v1.2.3 From 53e9c7b3bc0b1162028789445c2e430c06507a50 Mon Sep 17 00:00:00 2001 From: Maciej Stankiewicz Date: Tue, 10 Nov 2020 21:19:44 +0000 Subject: Translated using Weblate (Polish) Currently translated at 72.1% (610 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pl/ --- locale/pl.po | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/locale/pl.po b/locale/pl.po index fbae67695..1b0b41fdf 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-10 21:10+0000\n" +"PO-Revision-Date: 2020-11-11 19:13+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" "Language: pl\n" @@ -1817,7 +1817,7 @@ msgstr "" #: ports/stm/common-hal/busio/UART.c msgid "UART write error" -msgstr "" +msgstr "Błąd zapisu UART" #: shared-module/usb_hid/Device.c msgid "USB Busy" @@ -2014,7 +2014,7 @@ msgstr "__init__() powinien zwracać None" #: py/objtype.c msgid "__init__() should return None, not '%q'" -msgstr "" +msgstr "__init__() powinno zwrócić None, a nie '%q'" #: py/objobject.c msgid "__new__ arg must be a user-type" @@ -3057,11 +3057,11 @@ msgstr "nie dość argumentów przy formatowaniu" #: extmod/ulab/code/poly/poly.c msgid "number of arguments must be 2, or 3" -msgstr "" +msgstr "liczba argumentów musi wynosić 2 lub 3" #: extmod/ulab/code/ulab_create.c msgid "number of points must be at least 2" -msgstr "" +msgstr "liczba punktów musi wynosić co najmniej 2" #: py/obj.c msgid "object '%q' is not a tuple or list" @@ -3374,7 +3374,7 @@ msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "source palette too large" -msgstr "" +msgstr "źródłowa paleta jest zbyt duża" #: py/objstr.c msgid "start/end indices" -- cgit v1.2.3 From c96a86bd8a23cf5d238fabc83790d48b39fccd2c Mon Sep 17 00:00:00 2001 From: hexthat Date: Wed, 11 Nov 2020 08:03:23 +0000 Subject: Translated using Weblate (Chinese (Pinyin)) Currently translated at 100.0% (845 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/zh_Latn/ --- locale/zh_Latn_pinyin.po | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index c1853a73a..4d45f65bd 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-10-28 21:45+0000\n" +"PO-Revision-Date: 2020-11-11 19:13+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -15,7 +15,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Weblate 4.3.2-dev\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -304,7 +304,7 @@ msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng" #: ports/esp32s2/peripherals/pcnt_handler.c msgid "All PCNT units in use" -msgstr "" +msgstr "suǒ yǒu zhèng zài shǐ yòng zhōng de PCNT dān yuán" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c -- cgit v1.2.3 From ff411802374d4a77b0bc76da0e4fa31076c0182e Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Thu, 12 Nov 2020 16:30:30 +0530 Subject: pcnt reset on reload --- ports/esp32s2/peripherals/pcnt.c | 18 ++++++++++-------- ports/esp32s2/peripherals/pcnt.h | 1 + ports/esp32s2/supervisor/port.c | 5 +++++ 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/ports/esp32s2/peripherals/pcnt.c b/ports/esp32s2/peripherals/pcnt.c index 555a0ec1d..dd24569be 100644 --- a/ports/esp32s2/peripherals/pcnt.c +++ b/ports/esp32s2/peripherals/pcnt.c @@ -29,14 +29,20 @@ #define PCNT_UNIT_ACTIVE 1 #define PCNT_UNIT_INACTIVE 0 -static uint8_t pcnt_state[4]; +static uint8_t pcnt_unit_state[4]; + +void peripherals_pcnt_reset(void) { + for (uint8_t i = 0; i<=3; i++) { + pcnt_unit_state[i] = PCNT_UNIT_INACTIVE; + } +} int peripherals_pcnt_init(pcnt_config_t pcnt_config) { // Look for available pcnt unit for (uint8_t i = 0; i<=3; i++) { - if (pcnt_state[i] == PCNT_UNIT_INACTIVE) { + if (pcnt_unit_state[i] == PCNT_UNIT_INACTIVE) { pcnt_config.unit = (pcnt_unit_t)i; - pcnt_state[i] = PCNT_UNIT_ACTIVE; + pcnt_unit_state[i] = PCNT_UNIT_ACTIVE; break; } else if (i == 3) { return -1; @@ -46,10 +52,6 @@ int peripherals_pcnt_init(pcnt_config_t pcnt_config) { // Initialize PCNT unit pcnt_unit_config(&pcnt_config); - // Configure and enable the input filter - pcnt_set_filter_value(pcnt_config.unit, 100); - pcnt_filter_enable(pcnt_config.unit); - // Initialize PCNT's counter pcnt_counter_pause(pcnt_config.unit); pcnt_counter_clear(pcnt_config.unit); @@ -61,6 +63,6 @@ int peripherals_pcnt_init(pcnt_config_t pcnt_config) { } void peripherals_pcnt_deinit(pcnt_unit_t* unit) { - pcnt_state[*unit] = PCNT_UNIT_INACTIVE; + pcnt_unit_state[*unit] = PCNT_UNIT_INACTIVE; *unit = PCNT_UNIT_MAX; } diff --git a/ports/esp32s2/peripherals/pcnt.h b/ports/esp32s2/peripherals/pcnt.h index abed80fd0..4fce13f4d 100644 --- a/ports/esp32s2/peripherals/pcnt.h +++ b/ports/esp32s2/peripherals/pcnt.h @@ -31,5 +31,6 @@ extern int peripherals_pcnt_init(pcnt_config_t pcnt_config); extern void peripherals_pcnt_deinit(pcnt_unit_t* unit); +extern void peripherals_pcnt_reset(void); #endif // MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 3ea1fafbb..ef032c4a7 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -49,6 +49,7 @@ #include "shared-bindings/rtc/__init__.h" #include "peripherals/rmt.h" +#include "peripherals/pcnt.h" #include "components/heap/include/esp_heap_caps.h" #include "components/soc/soc/esp32s2/include/soc/cache_memory.h" @@ -117,6 +118,10 @@ void reset_port(void) { uart_reset(); #endif +#if defined(CIRCUITPY_COUNTIO) || defined(CIRCUITPY_ROTARYIO) + peripherals_pcnt_reset(); +#endif + #if CIRCUITPY_RTC rtc_reset(); #endif -- cgit v1.2.3 From 9774736a50577fe9ae1426d95fc3bea5751411fc Mon Sep 17 00:00:00 2001 From: Enrique Casado Date: Thu, 12 Nov 2020 12:30:34 +0100 Subject: Rename pins to make them the same as the Arduino core --- .../atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk | 3 ++- ports/atmel-samd/boards/dynossat_edu_eps/pins.c | 17 ++++++++++++----- ports/atmel-samd/boards/dynossat_edu_obc/pins.c | 4 ++++ 3 files changed, 18 insertions(+), 6 deletions(-) diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk index 3c0cc07be..61fafe8e9 100644 --- a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk +++ b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk @@ -15,8 +15,9 @@ LONGINT_IMPL = MPZ CIRCUITPY_BITBANGIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_COUNTIO = 0 -CIRCUITPY_I2CPERIPHERAL = 0 +CIRCUITPY_I2CPERIPHERAL = 1 CIRCUITPY_VECTORIO = 0 +CIRCUITPY_TOUCHIO = 0 CFLAGS_INLINE_LIMIT = 60 diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/pins.c b/ports/atmel-samd/boards/dynossat_edu_eps/pins.c index a910311d4..f960e6bb0 100644 --- a/ports/atmel-samd/boards/dynossat_edu_eps/pins.c +++ b/ports/atmel-samd/boards/dynossat_edu_eps/pins.c @@ -4,17 +4,17 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PB11) }, { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA12) }, { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB10) }, - { MP_ROM_QSTR(MP_QSTR_D30), MP_ROM_PTR(&pin_PA30) }, - { MP_ROM_QSTR(MP_QSTR_D31), MP_ROM_PTR(&pin_PA31) }, + { MP_ROM_QSTR(MP_QSTR_D26), MP_ROM_PTR(&pin_PA30) }, + { MP_ROM_QSTR(MP_QSTR_D27), MP_ROM_PTR(&pin_PA31) }, { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA17) }, { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA07) }, { MP_ROM_QSTR(MP_QSTR_OVTEMP), MP_ROM_PTR(&pin_PA07) }, { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA16) }, { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) }, { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) }, - { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA11) }, { MP_ROM_QSTR(MP_QSTR_SAT_RESET), MP_ROM_PTR(&pin_PA11) }, - { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA10) }, { MP_ROM_QSTR(MP_QSTR_SAT_PWR_ENABLE), MP_ROM_PTR(&pin_PA10) }, { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA19) }, { MP_ROM_QSTR(MP_QSTR_INT_IMU_OBC), MP_ROM_PTR(&pin_PA19) }, @@ -22,10 +22,17 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_PWRMON_SDA), MP_ROM_PTR(&pin_PA04) }, { MP_ROM_QSTR(MP_QSTR_PWRMON_SCL), MP_ROM_PTR(&pin_PA05) }, { MP_ROM_QSTR(MP_QSTR_PWRMON_ALERT), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_V_3V3_MEAS), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_V_5V_MEAS), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_FLASH_SCK), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_FLASH_MOSI), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_FLASH_MISO), MP_ROM_PTR(&pin_PA21) }, + { MP_ROM_QSTR(MP_QSTR_FLASH_CS), MP_ROM_PTR(&pin_PA20) }, { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA06) }, { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA06) }, { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, - { MP_ROM_QSTR(MP_QSTR_I2C_MONITOR), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, }; diff --git a/ports/atmel-samd/boards/dynossat_edu_obc/pins.c b/ports/atmel-samd/boards/dynossat_edu_obc/pins.c index a560360f7..8cc58d92c 100644 --- a/ports/atmel-samd/boards/dynossat_edu_obc/pins.c +++ b/ports/atmel-samd/boards/dynossat_edu_obc/pins.c @@ -26,12 +26,16 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB07) }, { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PB06) }, { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PB30) }, + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PB00) }, { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA08) }, { MP_ROM_QSTR(MP_QSTR_D32), MP_ROM_PTR(&pin_PA30) }, { MP_ROM_QSTR(MP_QSTR_D33), MP_ROM_PTR(&pin_PA31) }, { MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_PB22) }, { MP_ROM_QSTR(MP_QSTR_INT_IMU), MP_ROM_PTR(&pin_PA12) }, { MP_ROM_QSTR(MP_QSTR_SAT_POWER), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_OVTEMP), MP_ROM_PTR(&pin_PB00) }, { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA08) }, { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, -- cgit v1.2.3 From aa68b172232f6c817d0f2d3888abd38ada966a36 Mon Sep 17 00:00:00 2001 From: Enrique Casado Date: Thu, 12 Nov 2020 13:26:26 +0100 Subject: Freed some more space --- ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk | 3 +++ 1 file changed, 3 insertions(+) diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk index 61fafe8e9..6d2c1379d 100644 --- a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk +++ b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk @@ -12,12 +12,15 @@ EXTERNAL_FLASH_DEVICE_COUNT = 1 EXTERNAL_FLASH_DEVICES = "GD25Q32C" LONGINT_IMPL = MPZ +CIRCUITPY_FULLBUILD = 0 CIRCUITPY_BITBANGIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_COUNTIO = 0 CIRCUITPY_I2CPERIPHERAL = 1 CIRCUITPY_VECTORIO = 0 +CIRCUITPY_DISPLAYIO = 0 CIRCUITPY_TOUCHIO = 0 +CIRCUITPY_ROTARYIO = 0 CFLAGS_INLINE_LIMIT = 60 -- cgit v1.2.3 From 2f2fe10e12ba61e3a7f5b1548d89c7d294ce2d22 Mon Sep 17 00:00:00 2001 From: sporeball Date: Wed, 11 Nov 2020 23:14:48 +0000 Subject: Translated using Weblate (Japanese) Currently translated at 71.8% (607 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ja/ --- locale/ja.po | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/locale/ja.po b/locale/ja.po index 7004c49f3..443209555 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-06 20:29+0000\n" +"PO-Revision-Date: 2020-11-12 22:51+0000\n" "Last-Translator: sporeball \n" "Language-Team: none\n" "Language: ja\n" @@ -16,7 +16,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Weblate 4.3.2\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -2786,7 +2786,7 @@ msgstr "" #: shared-bindings/wifi/Radio.c msgid "invalid hostname" -msgstr "" +msgstr "不正なホスト名" #: extmod/modussl_axtls.c msgid "invalid key" -- cgit v1.2.3 From 1145fcaf3efa0ac073ae29e902a8dd5d48a1530d Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Thu, 12 Nov 2020 23:52:01 +0100 Subject: Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 5 +++++ locale/cs.po | 5 +++++ locale/de_DE.po | 5 +++++ locale/el.po | 5 +++++ locale/es.po | 5 +++++ locale/fil.po | 5 +++++ locale/fr.po | 5 +++++ locale/hi.po | 5 +++++ locale/it_IT.po | 5 +++++ locale/ja.po | 5 +++++ locale/ko.po | 5 +++++ locale/nl.po | 5 +++++ locale/pl.po | 5 +++++ locale/pt_BR.po | 5 +++++ locale/sv.po | 5 +++++ locale/zh_Latn_pinyin.po | 5 +++++ 16 files changed, 80 insertions(+) diff --git a/locale/ID.po b/locale/ID.po index 3e47dc9a1..90e416b3b 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -435,6 +435,11 @@ msgstr "Di bawah frame rate minimum" msgid "Bit clock and word select must share a clock unit" msgstr "Bit clock dan word harus memiliki kesamaan pada clock unit" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Kedalaman bit harus kelipatan 8." diff --git a/locale/cs.po b/locale/cs.po index 428d6d1fe..f02d31e4d 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -433,6 +433,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 059d726ca..c2cb26550 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -436,6 +436,11 @@ msgstr "Unterhalb der minimalen Frame Rate" msgid "Bit clock and word select must share a clock unit" msgstr "Bit clock und word select müssen eine clock unit teilen" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bit depth muss ein Vielfaches von 8 sein." diff --git a/locale/el.po b/locale/el.po index 327f4dbe0..4d7bff193 100644 --- a/locale/el.po +++ b/locale/el.po @@ -428,6 +428,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "" diff --git a/locale/es.po b/locale/es.po index 95d6a92ff..ed7431eb7 100644 --- a/locale/es.po +++ b/locale/es.po @@ -442,6 +442,11 @@ msgstr "Por debajo de taza mínima de refrescamiento" msgid "Bit clock and word select must share a clock unit" msgstr "Bit clock y word select deben compartir una unidad de reloj" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bits depth debe ser múltiplo de 8." diff --git a/locale/fil.po b/locale/fil.po index ce3b5616a..93f41a88e 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -433,6 +433,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "Ang bit clock at word select dapat makibahagi sa isang clock unit" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bit depth ay dapat multiple ng 8." diff --git a/locale/fr.po b/locale/fr.po index 94ca1f21c..ff15b527e 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -442,6 +442,11 @@ msgstr "Inférieur à la fréquence d'images minimale" msgid "Bit clock and word select must share a clock unit" msgstr "'bit clock' et 'word select' doivent partager une horloge" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "La profondeur de bit doit être un multiple de 8." diff --git a/locale/hi.po b/locale/hi.po index d87a1eb9c..aea2b3f0c 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -428,6 +428,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index 657c581ce..603cf9fd0 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -433,6 +433,11 @@ msgid "Bit clock and word select must share a clock unit" msgstr "" "Clock di bit e selezione parola devono condividere la stessa unità di clock" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "La profondità di bit deve essere multipla di 8." diff --git a/locale/ja.po b/locale/ja.po index 443209555..80486dc21 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -437,6 +437,11 @@ msgstr "最低のフレームレート未満" msgid "Bit clock and word select must share a clock unit" msgstr "bit clockとword selectはクロックユニットを共有しなければなりません" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "ビット深度は8の倍数でなければなりません" diff --git a/locale/ko.po b/locale/ko.po index 4b302f3b9..c9215fb85 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -433,6 +433,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "" diff --git a/locale/nl.po b/locale/nl.po index 6851e6ef3..cfe2193bb 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -435,6 +435,11 @@ msgstr "Onder de minimum frame rate" msgid "Bit clock and word select must share a clock unit" msgstr "Bit clock en word select moeten een clock eenheid delen" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bit diepte moet een meervoud van 8 zijn." diff --git a/locale/pl.po b/locale/pl.po index 1b0b41fdf..623acd4c5 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -437,6 +437,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "Zegar bitowy i wybór słowa muszą współdzielić jednostkę zegara" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Głębia musi być wielokrotnością 8." diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 99f090dbd..67b3dc8a7 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -443,6 +443,11 @@ msgstr "" "O clock de bits e a seleção de palavras devem compartilhar uma unidade de " "clock" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "A profundidade de bits deve ser o múltiplo de 8." diff --git a/locale/sv.po b/locale/sv.po index d9639aff6..be7eb0894 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -435,6 +435,11 @@ msgstr "Under minsta bildfrekvens" msgid "Bit clock and word select must share a clock unit" msgstr "Bitklocka och ordval måste dela en klockenhet" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bitdjup måste vara multipel av 8." diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 4d45f65bd..4ac1c3e1e 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -437,6 +437,11 @@ msgstr "Dī yú zuìdī zhèng sùlǜ" msgid "Bit clock and word select must share a clock unit" msgstr "Bǐtè shízhōng hé dānzì xuǎnzé bìxū gòngxiǎng shízhōng dānwèi" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bǐtè shēndù bìxū shì 8 bèi yǐshàng." -- cgit v1.2.3 From 0f7081781e8a45da513b371978a354ea8734cc31 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 12 Nov 2020 20:40:09 -0600 Subject: esp32s2: wifi: fix several debug-build errors Closes #3688 With this change, I don't get the ESP_ERROR_CHECK failed repeatedly running code that imports wifi. (I'm not getting a successful connection but that's probably my own fault, such as a secrets problem) --- ports/esp32s2/common-hal/wifi/__init__.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/esp32s2/common-hal/wifi/__init__.c b/ports/esp32s2/common-hal/wifi/__init__.c index 833ef0623..2eb3719b4 100644 --- a/ports/esp32s2/common-hal/wifi/__init__.c +++ b/ports/esp32s2/common-hal/wifi/__init__.c @@ -143,8 +143,8 @@ void wifi_reset(void) { radio->handler_instance_got_ip)); ESP_ERROR_CHECK(esp_wifi_deinit()); esp_netif_destroy(radio->netif); + ESP_ERROR_CHECK(esp_event_loop_delete_default()); radio->netif = NULL; - ESP_ERROR_CHECK(esp_netif_deinit()); } void ipaddress_ipaddress_to_esp_idf(mp_obj_t ip_address, ip_addr_t* esp_ip_address) { -- cgit v1.2.3 From 8d4296f96430795936a22769da35732e5342b25c Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Tue, 10 Nov 2020 18:02:16 -0800 Subject: Add board.DISPLAY to MagTag. Fix luma computation * Initialize the EPaper display on the MagTag at start. * Tweak the display send to take a const buffer. * Correct Luma math * Multiply the blue component, not add. * Add all of the components together before dividing. This reduces the impact of truncated division. --- .../boards/adafruit_magtag_2.9_grayscale/board.c | 122 +++++++++++++++++++++ .../boards/adafruit_magtag_2.9_grayscale/pins.c | 4 + ports/esp32s2/common-hal/displayio/ParallelBus.c | 3 +- shared-bindings/displayio/EPaperDisplay.h | 2 +- shared-bindings/displayio/FourWire.h | 3 +- shared-bindings/displayio/I2CDisplay.h | 3 +- shared-bindings/displayio/ParallelBus.h | 3 +- shared-bindings/displayio/__init__.h | 3 +- shared-module/displayio/ColorConverter.c | 2 +- shared-module/displayio/EPaperDisplay.c | 14 ++- shared-module/displayio/EPaperDisplay.h | 4 +- shared-module/displayio/FourWire.c | 3 +- shared-module/displayio/I2CDisplay.c | 3 +- 13 files changed, 152 insertions(+), 17 deletions(-) diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c index 9f708874b..ecd44e423 100644 --- a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c @@ -26,7 +26,83 @@ #include "boards/board.h" #include "mpconfigboard.h" +#include "shared-bindings/busio/SPI.h" +#include "shared-bindings/displayio/FourWire.h" #include "shared-bindings/microcontroller/Pin.h" +#include "shared-module/displayio/__init__.h" +#include "supervisor/shared/board.h" + +#define DELAY 0x80 + +// This is an ILO373 control chip. The display is a 2.9" grayscale EInk. + +const uint8_t display_start_sequence[] = { + 0x01, 5, 0x03, 0x00, 0x2b, 0x2b, 0x13, // power setting + 0x06, 3, 0x17, 0x17, 0x17, // booster soft start + 0x04, DELAY, 200, // power on and wait 200 ms + 0x00, 1, 0x7f, // panel setting + 0x50, 1, 0x97, // CDI setting + 0x30, 1, 0x3c, // PLL set to 50 Hx (M = 7, N = 4) + 0x61, 3, 0x80, 0x01, 0x28, // Resolution + 0x82, DELAY | 1, 0x12, 50, // VCM DC and delay 50ms + + // Look up tables for voltage sequence for pixel transition + // Common voltage + 0x20, 0x2a, + 0x00, 0x0a, 0x00, 0x00, 0x00, 0x01, + 0x60, 0x14, 0x14, 0x00, 0x00, 0x01, + 0x00, 0x14, 0x00, 0x00, 0x00, 0x01, + 0x00, 0x13, 0x0a, 0x01, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + // White to white + 0x21, 0x2a, + 0x40, 0x0a, 0x00, 0x00, 0x00, 0x01, + 0x90, 0x14, 0x14, 0x00, 0x00, 0x01, + 0x10, 0x14, 0x0a, 0x00, 0x00, 0x01, + 0xa0, 0x13, 0x01, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + // Black to white + 0x22, 0x2a, + 0x40, 0x0a, 0x00, 0x00, 0x00, 0x01, + 0x90, 0x14, 0x14, 0x00, 0x00, 0x01, + 0x00, 0x14, 0x0a, 0x00, 0x00, 0x01, + 0x99, 0x0c, 0x01, 0x03, 0x04, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + // White to black + 0x23, 0x2a, + 0x40, 0x0a, 0x00, 0x00, 0x00, 0x01, + 0x90, 0x14, 0x14, 0x00, 0x00, 0x01, + 0x00, 0x14, 0x0a, 0x00, 0x00, 0x01, + 0x99, 0x0b, 0x04, 0x04, 0x01, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + // Black to black + 0x24, 0x2a, + 0x80, 0x0a, 0x00, 0x00, 0x00, 0x01, + 0x90, 0x14, 0x14, 0x00, 0x00, 0x01, + 0x20, 0x14, 0x0a, 0x00, 0x00, 0x01, + 0x50, 0x13, 0x01, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +const uint8_t display_stop_sequence[] = { + 0x50, 0x01, 0x17, // CDI Setting + 0x82, 0x01, 0x00, // VCM DC to -0.1V + 0x02, 0x00 // Power off +}; void board_init(void) { // USB @@ -36,6 +112,52 @@ void board_init(void) { // Debug UART common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); + + busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus; + common_hal_busio_spi_construct(spi, &pin_GPIO36, &pin_GPIO35, NULL); + common_hal_busio_spi_never_reset(spi); + + displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus; + bus->base.type = &displayio_fourwire_type; + common_hal_displayio_fourwire_construct(bus, + spi, + &pin_GPIO7, // EPD_DC Command or data + &pin_GPIO8, // EPD_CS Chip select + &pin_GPIO6, // EPD_RST Reset + 4000000, // Baudrate + 0, // Polarity + 0); // Phase + + displayio_epaperdisplay_obj_t* display = &displays[0].epaper_display; + display->base.type = &displayio_epaperdisplay_type; + common_hal_displayio_epaperdisplay_construct( + display, + bus, + display_start_sequence, sizeof(display_start_sequence), + display_stop_sequence, sizeof(display_stop_sequence), + 296, // width + 128, // height + 160, // ram_width + 296, // ram_height + 0, // colstart + 0, // rowstart + 270, // rotation + NO_COMMAND, // set_column_window_command + NO_COMMAND, // set_row_window_command + NO_COMMAND, // set_current_column_command + NO_COMMAND, // set_current_row_command + 0x10, // write_black_ram_command + false, // black_bits_inverted + 0x13, // write_color_ram_command + false, // color_bits_inverted + 0x000000, // highlight_color + 0x12, // refresh_display_command + 1.0, // refresh_time + &pin_GPIO5, // busy_pin + false, // busy_state + 5.0, // seconds_per_frame + false, // always_toggle_chip_select + true); // grayscale } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c index 65bc3fb53..40c9e91e4 100644 --- a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c @@ -1,5 +1,7 @@ #include "shared-bindings/board/__init__.h" +#include "shared-module/displayio/__init__.h" + STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) }, { MP_ROM_QSTR(MP_QSTR_AD1), MP_ROM_PTR(&pin_GPIO18) }, @@ -37,5 +39,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + + { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].epaper_display)} }; MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/common-hal/displayio/ParallelBus.c b/ports/esp32s2/common-hal/displayio/ParallelBus.c index 314b72ff7..d0c98f361 100644 --- a/ports/esp32s2/common-hal/displayio/ParallelBus.c +++ b/ports/esp32s2/common-hal/displayio/ParallelBus.c @@ -57,7 +57,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { return false; } -void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { } diff --git a/shared-bindings/displayio/EPaperDisplay.h b/shared-bindings/displayio/EPaperDisplay.h index 352de899a..9a2d93bac 100644 --- a/shared-bindings/displayio/EPaperDisplay.h +++ b/shared-bindings/displayio/EPaperDisplay.h @@ -39,7 +39,7 @@ extern const mp_obj_type_t displayio_epaperdisplay_type; #define NO_COMMAND 0x100 void common_hal_displayio_epaperdisplay_construct(displayio_epaperdisplay_obj_t* self, - mp_obj_t bus, uint8_t* start_sequence, uint16_t start_sequence_len, uint8_t* stop_sequence, uint16_t stop_sequence_len, + mp_obj_t bus, const uint8_t* start_sequence, uint16_t start_sequence_len, const uint8_t* stop_sequence, uint16_t stop_sequence_len, uint16_t width, uint16_t height, uint16_t ram_width, uint16_t ram_height, int16_t colstart, int16_t rowstart, uint16_t rotation, uint16_t set_column_window_command, uint16_t set_row_window_command, uint16_t set_current_column_command, uint16_t set_current_row_command, diff --git a/shared-bindings/displayio/FourWire.h b/shared-bindings/displayio/FourWire.h index ac186d2c3..6f6b528e7 100644 --- a/shared-bindings/displayio/FourWire.h +++ b/shared-bindings/displayio/FourWire.h @@ -48,7 +48,8 @@ bool common_hal_displayio_fourwire_bus_free(mp_obj_t self); bool common_hal_displayio_fourwire_begin_transaction(mp_obj_t self); -void common_hal_displayio_fourwire_send(mp_obj_t self, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length); +void common_hal_displayio_fourwire_send(mp_obj_t self, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length); void common_hal_displayio_fourwire_end_transaction(mp_obj_t self); diff --git a/shared-bindings/displayio/I2CDisplay.h b/shared-bindings/displayio/I2CDisplay.h index bae53c491..37520202e 100644 --- a/shared-bindings/displayio/I2CDisplay.h +++ b/shared-bindings/displayio/I2CDisplay.h @@ -44,7 +44,8 @@ bool common_hal_displayio_i2cdisplay_bus_free(mp_obj_t self); bool common_hal_displayio_i2cdisplay_begin_transaction(mp_obj_t self); -void common_hal_displayio_i2cdisplay_send(mp_obj_t self, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length); +void common_hal_displayio_i2cdisplay_send(mp_obj_t self, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length); void common_hal_displayio_i2cdisplay_end_transaction(mp_obj_t self); diff --git a/shared-bindings/displayio/ParallelBus.h b/shared-bindings/displayio/ParallelBus.h index be2aef7d4..1e74e3a0a 100644 --- a/shared-bindings/displayio/ParallelBus.h +++ b/shared-bindings/displayio/ParallelBus.h @@ -46,7 +46,8 @@ bool common_hal_displayio_parallelbus_bus_free(mp_obj_t self); bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t self); -void common_hal_displayio_parallelbus_send(mp_obj_t self, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length); +void common_hal_displayio_parallelbus_send(mp_obj_t self, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length); void common_hal_displayio_parallelbus_end_transaction(mp_obj_t self); diff --git a/shared-bindings/displayio/__init__.h b/shared-bindings/displayio/__init__.h index a7748d029..4fc666c59 100644 --- a/shared-bindings/displayio/__init__.h +++ b/shared-bindings/displayio/__init__.h @@ -42,7 +42,8 @@ typedef enum { typedef bool (*display_bus_bus_reset)(mp_obj_t bus); typedef bool (*display_bus_bus_free)(mp_obj_t bus); typedef bool (*display_bus_begin_transaction)(mp_obj_t bus); -typedef void (*display_bus_send)(mp_obj_t bus, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length); +typedef void (*display_bus_send)(mp_obj_t bus, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length); typedef void (*display_bus_end_transaction)(mp_obj_t bus); void common_hal_displayio_release_displays(void); diff --git a/shared-module/displayio/ColorConverter.c b/shared-module/displayio/ColorConverter.c index 03ec99ceb..80558d037 100644 --- a/shared-module/displayio/ColorConverter.c +++ b/shared-module/displayio/ColorConverter.c @@ -55,7 +55,7 @@ uint8_t displayio_colorconverter_compute_luma(uint32_t color_rgb888) { uint32_t r8 = (color_rgb888 >> 16); uint32_t g8 = (color_rgb888 >> 8) & 0xff; uint32_t b8 = color_rgb888 & 0xff; - return (r8 * 19) / 255 + (g8 * 182) / 255 + (b8 + 54) / 255; + return (r8 * 19 + g8 * 182 + b8 * 54) / 255; } uint8_t displayio_colorconverter_compute_chroma(uint32_t color_rgb888) { diff --git a/shared-module/displayio/EPaperDisplay.c b/shared-module/displayio/EPaperDisplay.c index 514b99a13..acca92ac1 100644 --- a/shared-module/displayio/EPaperDisplay.c +++ b/shared-module/displayio/EPaperDisplay.c @@ -43,7 +43,8 @@ #include void common_hal_displayio_epaperdisplay_construct(displayio_epaperdisplay_obj_t* self, - mp_obj_t bus, uint8_t* start_sequence, uint16_t start_sequence_len, uint8_t* stop_sequence, uint16_t stop_sequence_len, + mp_obj_t bus, const uint8_t* start_sequence, uint16_t start_sequence_len, + const uint8_t* stop_sequence, uint16_t stop_sequence_len, uint16_t width, uint16_t height, uint16_t ram_width, uint16_t ram_height, int16_t colstart, int16_t rowstart, uint16_t rotation, uint16_t set_column_window_command, uint16_t set_row_window_command, @@ -133,14 +134,15 @@ STATIC void wait_for_busy(displayio_epaperdisplay_obj_t* self) { } } -STATIC void send_command_sequence(displayio_epaperdisplay_obj_t* self, bool should_wait_for_busy, uint8_t* sequence, uint32_t sequence_len) { +STATIC void send_command_sequence(displayio_epaperdisplay_obj_t* self, + bool should_wait_for_busy, const uint8_t* sequence, uint32_t sequence_len) { uint32_t i = 0; while (i < sequence_len) { - uint8_t *cmd = sequence + i; + const uint8_t *cmd = sequence + i; uint8_t data_size = *(cmd + 1); bool delay = (data_size & DELAY) != 0; data_size &= ~DELAY; - uint8_t *data = cmd + 2; + const uint8_t *data = cmd + 2; displayio_display_core_begin_transaction(&self->core); self->core.send(self->core.bus, DISPLAY_COMMAND, self->chip_select, cmd, 1); self->core.send(self->core.bus, DISPLAY_DATA, self->chip_select, data, data_size); @@ -375,8 +377,8 @@ void release_epaperdisplay(displayio_epaperdisplay_obj_t* self) { void displayio_epaperdisplay_collect_ptrs(displayio_epaperdisplay_obj_t* self) { displayio_display_core_collect_ptrs(&self->core); - gc_collect_ptr(self->start_sequence); - gc_collect_ptr(self->stop_sequence); + gc_collect_ptr((void *) self->start_sequence); + gc_collect_ptr((void *) self->stop_sequence); } bool maybe_refresh_epaperdisplay(void) { diff --git a/shared-module/displayio/EPaperDisplay.h b/shared-module/displayio/EPaperDisplay.h index 4103fe5fc..d0668ff44 100644 --- a/shared-module/displayio/EPaperDisplay.h +++ b/shared-module/displayio/EPaperDisplay.h @@ -38,9 +38,9 @@ typedef struct { displayio_display_core_t core; digitalio_digitalinout_obj_t busy; uint32_t milliseconds_per_frame; - uint8_t* start_sequence; + const uint8_t* start_sequence; uint32_t start_sequence_len; - uint8_t* stop_sequence; + const uint8_t* stop_sequence; uint32_t stop_sequence_len; uint16_t refresh_time; uint16_t set_column_window_command; diff --git a/shared-module/displayio/FourWire.c b/shared-module/displayio/FourWire.c index 8c56d7ab6..06f8a84e3 100644 --- a/shared-module/displayio/FourWire.c +++ b/shared-module/displayio/FourWire.c @@ -113,7 +113,8 @@ bool common_hal_displayio_fourwire_begin_transaction(mp_obj_t obj) { return true; } -void common_hal_displayio_fourwire_send(mp_obj_t obj, display_byte_type_t data_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_fourwire_send(mp_obj_t obj, display_byte_type_t data_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { displayio_fourwire_obj_t* self = MP_OBJ_TO_PTR(obj); common_hal_digitalio_digitalinout_set_value(&self->command, data_type == DISPLAY_DATA); if (chip_select == CHIP_SELECT_TOGGLE_EVERY_BYTE) { diff --git a/shared-module/displayio/I2CDisplay.c b/shared-module/displayio/I2CDisplay.c index 5bd03dcd6..cc811e83d 100644 --- a/shared-module/displayio/I2CDisplay.c +++ b/shared-module/displayio/I2CDisplay.c @@ -103,7 +103,8 @@ bool common_hal_displayio_i2cdisplay_begin_transaction(mp_obj_t obj) { return common_hal_busio_i2c_try_lock(self->bus); } -void common_hal_displayio_i2cdisplay_send(mp_obj_t obj, display_byte_type_t data_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_i2cdisplay_send(mp_obj_t obj, display_byte_type_t data_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { displayio_i2cdisplay_obj_t* self = MP_OBJ_TO_PTR(obj); if (data_type == DISPLAY_COMMAND) { uint8_t command_bytes[2 * data_length]; -- cgit v1.2.3 From 78ccac930fbcb3dddd3a1a79809a2ec371d34c6a Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Wed, 11 Nov 2020 16:53:45 -0800 Subject: Add .busy property to EPaperDisplay --- shared-bindings/displayio/EPaperDisplay.c | 18 ++++++++++++++++++ shared-bindings/displayio/EPaperDisplay.h | 1 + shared-module/displayio/EPaperDisplay.c | 5 +++++ 3 files changed, 24 insertions(+) diff --git a/shared-bindings/displayio/EPaperDisplay.c b/shared-bindings/displayio/EPaperDisplay.c index 8518e3714..ebff64008 100644 --- a/shared-bindings/displayio/EPaperDisplay.c +++ b/shared-bindings/displayio/EPaperDisplay.c @@ -245,6 +245,23 @@ const mp_obj_property_t displayio_epaperdisplay_time_to_refresh_obj = { (mp_obj_t)&mp_const_none_obj}, }; +//| busy: bool +//| """True when the display is refreshing. This uses the ``busy_pin`` when available or the +//| ``refresh_time`` otherwise.""" +//| +STATIC mp_obj_t displayio_epaperdisplay_obj_get_busy(mp_obj_t self_in) { + displayio_epaperdisplay_obj_t *self = native_display(self_in); + return mp_obj_new_bool(common_hal_displayio_epaperdisplay_get_busy(self)); +} +MP_DEFINE_CONST_FUN_OBJ_1(displayio_epaperdisplay_get_busy_obj, displayio_epaperdisplay_obj_get_busy); + +const mp_obj_property_t displayio_epaperdisplay_busy_obj = { + .base.type = &mp_type_property, + .proxy = {(mp_obj_t)&displayio_epaperdisplay_get_busy_obj, + (mp_obj_t)&mp_const_none_obj, + (mp_obj_t)&mp_const_none_obj}, +}; + //| width: int //| """Gets the width of the display in pixels""" //| @@ -301,6 +318,7 @@ STATIC const mp_rom_map_elem_t displayio_epaperdisplay_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_width), MP_ROM_PTR(&displayio_epaperdisplay_width_obj) }, { MP_ROM_QSTR(MP_QSTR_height), MP_ROM_PTR(&displayio_epaperdisplay_height_obj) }, { MP_ROM_QSTR(MP_QSTR_bus), MP_ROM_PTR(&displayio_epaperdisplay_bus_obj) }, + { MP_ROM_QSTR(MP_QSTR_busy), MP_ROM_PTR(&displayio_epaperdisplay_busy_obj) }, { MP_ROM_QSTR(MP_QSTR_time_to_refresh), MP_ROM_PTR(&displayio_epaperdisplay_time_to_refresh_obj) }, }; STATIC MP_DEFINE_CONST_DICT(displayio_epaperdisplay_locals_dict, displayio_epaperdisplay_locals_dict_table); diff --git a/shared-bindings/displayio/EPaperDisplay.h b/shared-bindings/displayio/EPaperDisplay.h index 9a2d93bac..f785203a4 100644 --- a/shared-bindings/displayio/EPaperDisplay.h +++ b/shared-bindings/displayio/EPaperDisplay.h @@ -52,6 +52,7 @@ bool common_hal_displayio_epaperdisplay_show(displayio_epaperdisplay_obj_t* self // Returns time in milliseconds. uint32_t common_hal_displayio_epaperdisplay_get_time_to_refresh(displayio_epaperdisplay_obj_t* self); +bool common_hal_displayio_epaperdisplay_get_busy(displayio_epaperdisplay_obj_t* self); uint16_t common_hal_displayio_epaperdisplay_get_width(displayio_epaperdisplay_obj_t* self); uint16_t common_hal_displayio_epaperdisplay_get_height(displayio_epaperdisplay_obj_t* self); diff --git a/shared-module/displayio/EPaperDisplay.c b/shared-module/displayio/EPaperDisplay.c index acca92ac1..1b285b4b1 100644 --- a/shared-module/displayio/EPaperDisplay.c +++ b/shared-module/displayio/EPaperDisplay.c @@ -360,6 +360,11 @@ void displayio_epaperdisplay_background(displayio_epaperdisplay_obj_t* self) { } } +bool common_hal_displayio_epaperdisplay_get_busy(displayio_epaperdisplay_obj_t* self) { + displayio_epaperdisplay_background(self); + return self->refreshing; +} + void release_epaperdisplay(displayio_epaperdisplay_obj_t* self) { if (self->refreshing) { wait_for_busy(self); -- cgit v1.2.3 From 68eb809fbf5cafdabb20c090b98aefb1628e3552 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Thu, 12 Nov 2020 12:39:31 -0800 Subject: Update parallel bus signatures --- ports/atmel-samd/common-hal/displayio/ParallelBus.c | 3 ++- ports/mimxrt10xx/common-hal/displayio/ParallelBus.c | 3 ++- ports/nrf/common-hal/displayio/ParallelBus.c | 3 ++- ports/stm/common-hal/displayio/ParallelBus.c | 3 ++- 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/ports/atmel-samd/common-hal/displayio/ParallelBus.c b/ports/atmel-samd/common-hal/displayio/ParallelBus.c index 405c08c64..f10dd2993 100644 --- a/ports/atmel-samd/common-hal/displayio/ParallelBus.c +++ b/ports/atmel-samd/common-hal/displayio/ParallelBus.c @@ -129,7 +129,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { return true; } -void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { displayio_parallelbus_obj_t* self = MP_OBJ_TO_PTR(obj); common_hal_digitalio_digitalinout_set_value(&self->command, byte_type == DISPLAY_DATA); uint32_t* clear_write = (uint32_t*) &self->write_group->OUTCLR.reg; diff --git a/ports/mimxrt10xx/common-hal/displayio/ParallelBus.c b/ports/mimxrt10xx/common-hal/displayio/ParallelBus.c index 87a72d0f3..0fdf4413b 100644 --- a/ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +++ b/ports/mimxrt10xx/common-hal/displayio/ParallelBus.c @@ -57,7 +57,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { return false; } -void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { } diff --git a/ports/nrf/common-hal/displayio/ParallelBus.c b/ports/nrf/common-hal/displayio/ParallelBus.c index f13e03163..31ee1f48e 100644 --- a/ports/nrf/common-hal/displayio/ParallelBus.c +++ b/ports/nrf/common-hal/displayio/ParallelBus.c @@ -141,7 +141,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { } // This ignores chip_select behaviour because data is clocked in by the write line toggling. -void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { displayio_parallelbus_obj_t* self = MP_OBJ_TO_PTR(obj); common_hal_digitalio_digitalinout_set_value(&self->command, byte_type == DISPLAY_DATA); uint32_t* clear_write = (uint32_t*) &self->write_group->OUTCLR; diff --git a/ports/stm/common-hal/displayio/ParallelBus.c b/ports/stm/common-hal/displayio/ParallelBus.c index 314b72ff7..fd07d38af 100644 --- a/ports/stm/common-hal/displayio/ParallelBus.c +++ b/ports/stm/common-hal/displayio/ParallelBus.c @@ -57,7 +57,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { return false; } -void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { } -- cgit v1.2.3 From bda3267432aee57e704a20308b724369cceeb6ca Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Fri, 13 Nov 2020 18:33:02 -0800 Subject: Save flash space * No weak link for modules. It only impacts _os and _time and is already disabled for non-full builds. * Turn off PA00 and PA01 because they are the crystal on the Metro M0 Express. * Change ejected default to false to move it to BSS. It is set on USB connection anyway. * Set sinc_filter to const. Doesn't help flash but keeps it out of RAM. --- ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h | 4 ++++ ports/atmel-samd/common-hal/audiobusio/PDMIn.c | 2 +- py/circuitpy_mpconfig.h | 2 +- supervisor/shared/usb/usb_msc_flash.c | 2 +- 4 files changed, 7 insertions(+), 3 deletions(-) diff --git a/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h b/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h index 04565feb4..d48c596ac 100644 --- a/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h +++ b/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h @@ -33,6 +33,10 @@ #define DEFAULT_UART_BUS_RX (&pin_PA11) #define DEFAULT_UART_BUS_TX (&pin_PA10) +// These pins are connected to the external crystal. +#define IGNORE_PIN_PA00 1 +#define IGNORE_PIN_PA01 1 + // USB is always used internally so skip the pin objects for it. #define IGNORE_PIN_PA24 1 #define IGNORE_PIN_PA25 1 diff --git a/ports/atmel-samd/common-hal/audiobusio/PDMIn.c b/ports/atmel-samd/common-hal/audiobusio/PDMIn.c index 21474ab3b..3c9ec05c2 100644 --- a/ports/atmel-samd/common-hal/audiobusio/PDMIn.c +++ b/ports/atmel-samd/common-hal/audiobusio/PDMIn.c @@ -326,7 +326,7 @@ static void setup_dma(audiobusio_pdmin_obj_t* self, uint32_t length, // higher sample rate than specified. Then after the audio is // recorded, a more expensive filter non-real-time filter could be // used to down-sample and low-pass. -uint16_t sinc_filter [OVERSAMPLING] = { +const uint16_t sinc_filter [OVERSAMPLING] = { 0, 2, 9, 21, 39, 63, 94, 132, 179, 236, 302, 379, 467, 565, 674, 792, 920, 1055, 1196, 1341, 1487, 1633, 1776, 1913, diff --git a/py/circuitpy_mpconfig.h b/py/circuitpy_mpconfig.h index 08efabddb..85e152670 100644 --- a/py/circuitpy_mpconfig.h +++ b/py/circuitpy_mpconfig.h @@ -186,7 +186,7 @@ typedef long mp_off_t; #define MICROPY_CPYTHON_COMPAT (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_POW3 (CIRCUITPY_FULL_BUILD) #define MICROPY_COMP_FSTRING_LITERAL (MICROPY_CPYTHON_COMPAT) -#define MICROPY_MODULE_WEAK_LINKS (CIRCUITPY_FULL_BUILD) +#define MICROPY_MODULE_WEAK_LINKS (0) #define MICROPY_PY_ALL_SPECIAL_METHODS (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_COMPLEX (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_FROZENSET (CIRCUITPY_FULL_BUILD) diff --git a/supervisor/shared/usb/usb_msc_flash.c b/supervisor/shared/usb/usb_msc_flash.c index 7532b6aea..b39f60dcd 100644 --- a/supervisor/shared/usb/usb_msc_flash.c +++ b/supervisor/shared/usb/usb_msc_flash.c @@ -39,7 +39,7 @@ #define MSC_FLASH_BLOCK_SIZE 512 -static bool ejected[1] = {true}; +static bool ejected[1] = {false}; void usb_msc_mount(void) { // Reset the ejection tracking every time we're plugged into USB. This allows for us to battery -- cgit v1.2.3 From 146adca060d7abc76149c88c7cdd2d401f799efa Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Sat, 14 Nov 2020 11:41:14 +0530 Subject: Add watchdog mode raise --- ports/esp32s2/common-hal/watchdog/WatchDogTimer.c | 9 ++++++++- ports/esp32s2/common-hal/watchdog/WatchDogTimer.h | 3 +-- ports/esp32s2/supervisor/port.c | 5 +++++ 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c index 59b9dafcf..b51a391b7 100644 --- a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +++ b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c @@ -27,12 +27,19 @@ #include "py/runtime.h" #include "common-hal/watchdog/WatchDogTimer.h" +#include "shared-bindings/watchdog/__init__.h" #include "shared-bindings/microcontroller/__init__.h" #include "esp_task_wdt.h" void esp_task_wdt_isr_user_handler(void) { - + mp_obj_exception_clear_traceback(MP_OBJ_FROM_PTR(&mp_watchdog_timeout_exception)); + MP_STATE_VM(mp_pending_exception) = &mp_watchdog_timeout_exception; +#if MICROPY_ENABLE_SCHEDULER + if (MP_STATE_VM(sched_state) == MP_SCHED_IDLE) { + MP_STATE_VM(sched_state) = MP_SCHED_PENDING; + } +#endif } void common_hal_watchdog_feed(watchdog_watchdogtimer_obj_t *self) { diff --git a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h index 05e0e954d..04d9aeee6 100644 --- a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h +++ b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h @@ -37,8 +37,7 @@ struct _watchdog_watchdogtimer_obj_t { watchdog_watchdogmode_t mode; }; -// This needs to be called in order to disable the watchdog if it's set to -// "RAISE". If set to "RESET", then the watchdog cannot be reset. +// This needs to be called in order to disable the watchdog void watchdog_reset(void); #endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_WATCHDOG_WATCHDOGTIMER_H diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 0b9c03f74..1b6f5ef7c 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -41,6 +41,7 @@ #include "common-hal/busio/UART.h" #include "common-hal/pulseio/PulseIn.h" #include "common-hal/pwmio/PWMOut.h" +#include "common-hal/watchdog/WatchDogTimer.h" #include "common-hal/wifi/__init__.h" #include "supervisor/memory.h" #include "supervisor/shared/tick.h" @@ -119,6 +120,10 @@ void reset_port(void) { rtc_reset(); #endif +#if CIRCUITPY_WATCHDOG + watchdog_reset(); +#endif + #if CIRCUITPY_WIFI wifi_reset(); #endif -- cgit v1.2.3 From 231e3d362dae1988d5103b1042957ae793599d8b Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Sat, 14 Nov 2020 10:16:39 -0600 Subject: esp32s2: Update esp-idf submodule to include fix for #3424 This re-points the submodule to my personal fork of esp-idf. Users may need to `git submodule sync` in their existing trees when this change occurs. Adds just the following commit in esp-idf: > esp_crt_bundle: Allow verify_callback to correct BADCERT_BAD_MD --- .gitmodules | 2 +- ports/esp32s2/esp-idf | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/.gitmodules b/.gitmodules index f66ce8aaf..aaa66caf7 100644 --- a/.gitmodules +++ b/.gitmodules @@ -152,4 +152,4 @@ url = https://github.com/adafruit/Adafruit_CircuitPython_RFM69.git [submodule "ports/esp32s2/esp-idf"] path = ports/esp32s2/esp-idf - url = https://github.com/espressif/esp-idf.git + url = https://github.com/jepler/esp-idf.git diff --git a/ports/esp32s2/esp-idf b/ports/esp32s2/esp-idf index 8bc19ba89..d06744f5e 160000 --- a/ports/esp32s2/esp-idf +++ b/ports/esp32s2/esp-idf @@ -1 +1 @@ -Subproject commit 8bc19ba893e5544d571a753d82b44a84799b94b1 +Subproject commit d06744f5efc382c61cbad8758107cec308feef09 -- cgit v1.2.3 From 6c3c076cc110d935f0f8406de81007563994e553 Mon Sep 17 00:00:00 2001 From: RubenD Date: Fri, 13 Nov 2020 23:49:31 +0000 Subject: Translated using Weblate (Spanish) Currently translated at 99.2% (840 of 846 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/es/ --- locale/es.po | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/locale/es.po b/locale/es.po index ed7431eb7..c5e2ad75f 100644 --- a/locale/es.po +++ b/locale/es.po @@ -8,15 +8,15 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-01 16:26+0000\n" -"Last-Translator: Alvaro Figueroa \n" +"PO-Revision-Date: 2020-11-15 16:28+0000\n" +"Last-Translator: RubenD \n" "Language-Team: \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.3.2-dev\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -305,7 +305,7 @@ msgstr "Todos los periféricos I2C están siendo usados" #: ports/esp32s2/peripherals/pcnt_handler.c msgid "All PCNT units in use" -msgstr "" +msgstr "Todas las unidades PCNT en uso" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c @@ -445,7 +445,7 @@ msgstr "Bit clock y word select deben compartir una unidad de reloj" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Bit depth must be from 1 to 6 inclusive, not %d" -msgstr "" +msgstr "Bit depth tiene que ser de 1 a 6 inclusivo, no %d" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." -- cgit v1.2.3 From 76d60ba95bb79e0a553fd6f9dcb5cb25806ada2f Mon Sep 17 00:00:00 2001 From: Antonin ENFRUN Date: Fri, 13 Nov 2020 07:56:16 +0000 Subject: Translated using Weblate (French) Currently translated at 100.0% (846 of 846 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/fr/ --- locale/fr.po | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/locale/fr.po b/locale/fr.po index ff15b527e..5d4ca75d5 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -8,14 +8,14 @@ msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-10-22 20:48+0000\n" +"PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: Antonin ENFRUN \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.3.1\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -298,7 +298,7 @@ msgstr "Type d'adresse hors plage" #: ports/esp32s2/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" -msgstr "" +msgstr "Tous les périphériques CAN sont utilisés" #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" @@ -306,7 +306,7 @@ msgstr "Tous les périphériques I2C sont utilisés" #: ports/esp32s2/peripherals/pcnt_handler.c msgid "All PCNT units in use" -msgstr "" +msgstr "Toutes les unités PCNT sont utilisées" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c @@ -431,7 +431,7 @@ msgstr "" #: ports/esp32s2/common-hal/canio/CAN.c msgid "Baudrate not supported by peripheral" -msgstr "" +msgstr "Baudrate non prise en charge par le périphérique" #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c @@ -445,7 +445,7 @@ msgstr "'bit clock' et 'word select' doivent partager une horloge" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Bit depth must be from 1 to 6 inclusive, not %d" -msgstr "" +msgstr "Bit depth doit être compris entre 1 et 6 inclus, et non %d" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." @@ -2953,7 +2953,7 @@ msgstr "entiers longs non supportés dans cette build" #: ports/esp32s2/common-hal/canio/CAN.c msgid "loopback + silent mode not supported by peripheral" -msgstr "" +msgstr "loopback + silent mode non pris en charge par le périphérique" #: py/parse.c msgid "malformed f-string" @@ -2991,11 +2991,11 @@ msgstr "profondeur maximale de récursivité dépassée" #: extmod/ulab/code/approx/approx.c msgid "maxiter must be > 0" -msgstr "" +msgstr "maxiter doit être > 0" #: extmod/ulab/code/approx/approx.c msgid "maxiter should be > 0" -msgstr "" +msgstr "maxiter devrait être > 0" #: py/runtime.c #, c-format @@ -3440,7 +3440,7 @@ msgstr "l'argument de «sort» doit être un ndarray" #: extmod/ulab/code/numerical/numerical.c msgid "sorted axis can't be longer than 65535" -msgstr "" +msgstr "sorted axis ne peut pas dépasser 65535" #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" @@ -3575,12 +3575,12 @@ msgstr "tuple/liste a une mauvaise longueur" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_driver_install returned esp-idf error #%d" -msgstr "" +msgstr "twai_driver_install a renvoyé l'erreur esp-idf #%d" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_start returned esp-idf error #%d" -msgstr "" +msgstr "twai_start a renvoyé l'erreur esp-idf #%d" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -- cgit v1.2.3 From 8218eb2ddf92d979b16391a9a5400ab8a5ce2e67 Mon Sep 17 00:00:00 2001 From: Jonny Bergdahl Date: Fri, 13 Nov 2020 19:51:22 +0000 Subject: Translated using Weblate (Swedish) Currently translated at 100.0% (846 of 846 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/sv/ --- locale/sv.po | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/locale/sv.po b/locale/sv.po index be7eb0894..1a603e496 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-05 20:26+0000\n" +"PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" "Language: sv\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.3.2\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -302,7 +302,7 @@ msgstr "All I2C-kringutrustning används" #: ports/esp32s2/peripherals/pcnt_handler.c msgid "All PCNT units in use" -msgstr "" +msgstr "Alla PCNT-enheter används" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c @@ -438,7 +438,7 @@ msgstr "Bitklocka och ordval måste dela en klockenhet" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Bit depth must be from 1 to 6 inclusive, not %d" -msgstr "" +msgstr "Bitdjup måste vara inom 1 till 6, inte %d" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." -- cgit v1.2.3 From 64725190f47fbe3d2b4e54b0e58c485949878a89 Mon Sep 17 00:00:00 2001 From: hexthat Date: Sat, 14 Nov 2020 15:43:32 +0000 Subject: Translated using Weblate (Chinese (Pinyin)) Currently translated at 100.0% (846 of 846 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/zh_Latn/ --- locale/zh_Latn_pinyin.po | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 4ac1c3e1e..2731ec4f5 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-11 19:13+0000\n" +"PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -440,7 +440,7 @@ msgstr "Bǐtè shízhōng hé dānzì xuǎnzé bìxū gòngxiǎng shízhōng dā #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Bit depth must be from 1 to 6 inclusive, not %d" -msgstr "" +msgstr "wèi shēn dù bì xū bāo hán 1 dào 6， ér bù shì %d" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." -- cgit v1.2.3 From d4ab00f734203d358299508c01378d97ddf9d40f Mon Sep 17 00:00:00 2001 From: BennyE Date: Mon, 16 Nov 2020 00:31:06 +0100 Subject: Set station mode early to avoid SoftAP on startup --- ports/esp32s2/common-hal/wifi/Radio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index 275bae31a..1945da207 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -72,6 +72,8 @@ void common_hal_wifi_radio_set_enabled(wifi_radio_obj_t *self, bool enabled) { return; } if (!self->started && enabled) { + // esp_wifi_start() would default to soft-AP, thus setting it to station + ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA)); ESP_ERROR_CHECK(esp_wifi_start()); self->started = true; return; -- cgit v1.2.3 From 0cd951fb73198f5c3dd03ea0463382edac0d3d4d Mon Sep 17 00:00:00 2001 From: root Date: Mon, 16 Nov 2020 10:36:05 -0600 Subject: Prevent exceptions from accumulating in REPL --- py/obj.c | 1 + 1 file changed, 1 insertion(+) diff --git a/py/obj.c b/py/obj.c index 9dc0cf474..315e816e0 100644 --- a/py/obj.c +++ b/py/obj.c @@ -125,6 +125,7 @@ void mp_obj_print_exception(const mp_print_t *print, mp_obj_t exc) { mp_printf(print, decompressed_block, block); } } + mp_obj_exception_clear_traceback(exc); } } mp_obj_print_helper(print, exc, PRINT_EXC); -- cgit v1.2.3 From 9c4b6c34b8cfacdc86074df261a4eac0fc23b129 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 16 Nov 2020 16:03:29 -0600 Subject: see what happens if workflows move to ubuntu 20.04 --- .github/workflows/build.yml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index c83f37e6e..bd0dea5cf 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -14,7 +14,7 @@ on: jobs: test: - runs-on: ubuntu-18.04 + runs-on: ubuntu-20.04 steps: - name: Dump GitHub context env: @@ -165,7 +165,7 @@ jobs: build-arm: - runs-on: ubuntu-18.04 + runs-on: ubuntu-20.04 needs: test strategy: fail-fast: false @@ -368,7 +368,7 @@ jobs: if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) build-riscv: - runs-on: ubuntu-18.04 + runs-on: ubuntu-20.04 needs: test strategy: fail-fast: false -- cgit v1.2.3 From 3b27810a3ab6c15d0612b986e6f6086aecccdbcb Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Tue, 17 Nov 2020 00:02:02 +0100 Subject: Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 15 +++++++++++++-- locale/cs.po | 15 +++++++++++++-- locale/de_DE.po | 15 +++++++++++++-- locale/el.po | 15 +++++++++++++-- locale/es.po | 15 +++++++++++++-- locale/fil.po | 15 +++++++++++++-- locale/fr.po | 15 +++++++++++++-- locale/hi.po | 15 +++++++++++++-- locale/it_IT.po | 15 +++++++++++++-- locale/ja.po | 15 +++++++++++++-- locale/ko.po | 15 +++++++++++++-- locale/nl.po | 15 +++++++++++++-- locale/pl.po | 15 +++++++++++++-- locale/pt_BR.po | 15 +++++++++++++-- locale/sv.po | 15 +++++++++++++-- locale/zh_Latn_pinyin.po | 15 +++++++++++++-- 16 files changed, 208 insertions(+), 32 deletions(-) diff --git a/locale/ID.po b/locale/ID.po index 90e416b3b..d6672b1e4 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-10-10 23:51+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" @@ -300,7 +300,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Semua perangkat I2C sedang digunakan" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1018,6 +1019,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Ukuran penyangga salah" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3254,6 +3259,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3469,6 +3475,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3653,6 +3660,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index f02d31e4d..bde3a20b8 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-05-24 03:22+0000\n" "Last-Translator: dronecz \n" "Language-Team: LANGUAGE \n" @@ -300,7 +300,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1001,6 +1002,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3210,6 +3215,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3425,6 +3431,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3608,6 +3615,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index c2cb26550..dabc48659 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-06-16 18:24+0000\n" "Last-Translator: Andreas Buchen \n" "Language: de_DE\n" @@ -299,7 +299,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Alle I2C-Peripheriegeräte sind in Benutzung" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1018,6 +1019,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Inkorrekte Puffergröße" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3293,6 +3298,7 @@ msgstr "pow() drittes Argument darf nicht 0 sein" msgid "pow() with 3 arguments requires integers" msgstr "pow () mit 3 Argumenten erfordert Integer" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3511,6 +3517,7 @@ msgstr "threshold muss im Intervall 0-65536 liegen" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() nimmt eine 9-Sequenz an" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "Das Zeitlimit hat den maximal zulässigen Wert überschritten" @@ -3698,6 +3705,10 @@ msgstr "value_count muss größer als 0 sein" msgid "vectors must have same lengths" msgstr "Vektoren müssen die selbe Länge haben" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/el.po b/locale/el.po index 4d7bff193..0d35c20ce 100644 --- a/locale/el.po +++ b/locale/el.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -295,7 +295,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -996,6 +997,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3205,6 +3210,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3420,6 +3426,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3603,6 +3610,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/es.po b/locale/es.po index c5e2ad75f..bdb4b68a5 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: RubenD \n" "Language-Team: \n" @@ -303,7 +303,8 @@ msgstr "Todos los periféricos CAN están en uso" msgid "All I2C peripherals are in use" msgstr "Todos los periféricos I2C están siendo usados" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "Todas las unidades PCNT en uso" @@ -1019,6 +1020,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Tamaño incorrecto del buffer" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "La entrada está durando mucho tiempo" @@ -3281,6 +3286,7 @@ msgstr "el 3er argumento de pow() no puede ser 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() con 3 argumentos requiere enteros" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3498,6 +3504,7 @@ msgstr "limite debe ser en el rango 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() toma un sequencio 9" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3682,6 +3689,10 @@ msgstr "value_count debe ser > 0" msgid "vectors must have same lengths" msgstr "los vectores deben tener el mismo tamaño" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "el tiempo de espera del perro guardián debe ser mayor a 0" diff --git a/locale/fil.po b/locale/fil.po index 93f41a88e..c74e13c6c 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy \n" "Language-Team: fil\n" @@ -297,7 +297,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Lahat ng I2C peripherals ginagamit" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1011,6 +1012,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3256,6 +3261,7 @@ msgstr "pow() 3rd argument ay hindi maaring 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() na may 3 argumento kailangan ng integers" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3474,6 +3480,7 @@ msgstr "ang threshold ay dapat sa range 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() kumukuha ng 9-sequence" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3658,6 +3665,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/fr.po b/locale/fr.po index 5d4ca75d5..a15bbb8d5 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: Antonin ENFRUN \n" "Language: fr\n" @@ -304,7 +304,8 @@ msgstr "Tous les périphériques CAN sont utilisés" msgid "All I2C peripherals are in use" msgstr "Tous les périphériques I2C sont utilisés" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "Toutes les unités PCNT sont utilisées" @@ -1024,6 +1025,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Taille de tampon incorrecte" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "L'entrée prend trop de temps" @@ -3305,6 +3310,7 @@ msgstr "le 3e argument de pow() ne peut être 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() avec 3 arguments nécessite des entiers" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3523,6 +3529,7 @@ msgstr "le seuil doit être dans la gamme 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() prend une séquence de longueur 9" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "le délai d'expiration a dépassé la valeur maximale prise en charge" @@ -3706,6 +3713,10 @@ msgstr "'value_count' doit être > 0" msgid "vectors must have same lengths" msgstr "les vecteurs doivent avoir la même longueur" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "watchdog timeout doit être supérieur à 0" diff --git a/locale/hi.po b/locale/hi.po index aea2b3f0c..6c49e1f01 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -295,7 +295,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -996,6 +997,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3205,6 +3210,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3420,6 +3426,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3603,6 +3610,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index 603cf9fd0..fc0f01675 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin \n" "Language-Team: \n" @@ -296,7 +296,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Tutte le periferiche I2C sono in uso" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1011,6 +1012,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3263,6 +3268,7 @@ msgstr "il terzo argomento di pow() non può essere 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() con 3 argomenti richiede interi" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3481,6 +3487,7 @@ msgstr "la soglia deve essere nell'intervallo 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3665,6 +3672,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/ja.po b/locale/ja.po index 80486dc21..f3dfc6c90 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-12 22:51+0000\n" "Last-Translator: sporeball \n" "Language-Team: none\n" @@ -302,7 +302,8 @@ msgstr "全てのCAN周辺機器が使用中" msgid "All I2C peripherals are in use" msgstr "全てのI2C周辺機器が使用中" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1011,6 +1012,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "バッファサイズが正しくありません" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3237,6 +3242,7 @@ msgstr "pow()の3つ目の引数は0にできません" msgid "pow() with 3 arguments requires integers" msgstr "pow()の第3引数には整数が必要" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3453,6 +3459,7 @@ msgstr "threshouldは0から65536まで" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time()は9要素のシーケンスを受け取ります" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "タイムアウト長は対応する最大値を超えています" @@ -3636,6 +3643,10 @@ msgstr "value_countは0より大きくなければなりません" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "watchdogのtimeoutは0以上でなければなりません" diff --git a/locale/ko.po b/locale/ko.po index c9215fb85..bfa49ab70 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-10-05 12:12+0000\n" "Last-Translator: Michal Čihař \n" "Language-Team: LANGUAGE \n" @@ -298,7 +298,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "사용중인 모든 I2C주변 기기" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1001,6 +1002,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3211,6 +3216,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3426,6 +3432,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3609,6 +3616,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index cfe2193bb..7625cdb26 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-10-27 16:47+0000\n" "Last-Translator: Jelle Jager \n" "Language-Team: none\n" @@ -300,7 +300,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Alle I2C peripherals zijn in gebruik" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1013,6 +1014,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Incorrecte buffer grootte" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "Invoer duurt te lang" @@ -3270,6 +3275,7 @@ msgstr "derde argument van pow() mag geen 0 zijn" msgid "pow() with 3 arguments requires integers" msgstr "pow() met 3 argumenten vereist integers" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3487,6 +3493,7 @@ msgstr "drempelwaarde moet in het bereik 0-65536 liggen" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() accepteert een 9-rij" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "time-outduur is groter dan de ondersteunde maximale waarde" @@ -3670,6 +3677,10 @@ msgstr "value_count moet groter dan 0 zijn" msgid "vectors must have same lengths" msgstr "vectoren moeten van gelijke lengte zijn" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "watchdog time-out moet groter zijn dan 0" diff --git a/locale/pl.po b/locale/pl.po index 623acd4c5..f04887e68 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-11 19:13+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" @@ -302,7 +302,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Wszystkie peryferia I2C w użyciu" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1011,6 +1012,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Niewłaściwa wielkość bufora" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3229,6 +3234,7 @@ msgstr "trzeci argument pow() nie może być 0" msgid "pow() with 3 arguments requires integers" msgstr "trzyargumentowe pow() wymaga liczb całkowitych" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3445,6 +3451,7 @@ msgstr "threshold musi być w zakresie 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() wymaga 9-elementowej sekwencji" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3628,6 +3635,10 @@ msgstr "value_count musi być > 0" msgid "vectors must have same lengths" msgstr "wektory muszą mieć identyczną długość" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 67b3dc8a7..491868979 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-08 10:26+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" @@ -304,7 +304,8 @@ msgstr "Todos os periféricos CAN estão em uso" msgid "All I2C peripherals are in use" msgstr "Todos os periféricos I2C estão em uso" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "Todas as unidades PCNT estão em uso" @@ -1022,6 +1023,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "O tamanho do buffer está incorreto" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "A entrada está demorando demais" @@ -3296,6 +3301,7 @@ msgstr "O terceiro argumento pow() não pode ser 0" msgid "pow() with 3 arguments requires integers" msgstr "o pow() com 3 argumentos requer números inteiros" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3513,6 +3519,7 @@ msgstr "Limite deve estar no alcance de 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() leva uma sequência com 9" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "a duração do tempo limite excedeu o valor máximo suportado" @@ -3696,6 +3703,10 @@ msgstr "o value_count deve ser > 0" msgid "vectors must have same lengths" msgstr "os vetores devem ter os mesmos comprimentos" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "o tempo limite do watchdog deve ser maior que 0" diff --git a/locale/sv.po b/locale/sv.po index 1a603e496..55e6368ae 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" @@ -300,7 +300,8 @@ msgstr "All I2C-kringutrustning används" msgid "All I2C peripherals are in use" msgstr "All I2C-kringutrustning används" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "Alla PCNT-enheter används" @@ -1011,6 +1012,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Fel buffertstorlek" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "Indata tar för lång tid" @@ -3263,6 +3268,7 @@ msgstr "pow() 3: e argument kan inte vara 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() med 3 argument kräver heltal" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3480,6 +3486,7 @@ msgstr "tröskelvärdet måste ligga i intervallet 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() kräver en 9-sekvens" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "timeout-längd överskred det maximala värde som stöds" @@ -3663,6 +3670,10 @@ msgstr "value_count måste vara > 0" msgid "vectors must have same lengths" msgstr "vektorer måste ha samma längd" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "watchdog timeout måste vara större än 0" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 2731ec4f5..dd44aab93 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -302,7 +302,8 @@ msgstr "suǒ yǒu CAN wài shè dōu zài shǐ yòng zhōng" msgid "All I2C peripherals are in use" msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "suǒ yǒu zhèng zài shǐ yòng zhōng de PCNT dān yuán" @@ -1009,6 +1010,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "Shūrù shíjiānguò zhǎng" @@ -3252,6 +3257,7 @@ msgstr "pow() 3 cān shǔ bùnéng wéi 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() yǒu 3 cānshù xūyào zhěngshù" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3469,6 +3475,7 @@ msgstr "yùzhí bìxū zài fànwéi 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() xūyào 9 xùliè" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "chāoshí shíjiān chāoguò zuìdà zhīchí zhí" @@ -3652,6 +3659,10 @@ msgstr "zhí jìshù bìxū wèi > 0" msgid "vectors must have same lengths" msgstr "xiàngliàng bìxū jùyǒu xiāngtóng de chángdù" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "kān mén gǒu chāoshí bìxū dàyú 0" -- cgit v1.2.3 From 7750b4d6712b410bd8ccc498e571297b4628884a Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 17 Nov 2020 07:37:07 -0600 Subject: actions: Disable pagination of 'aws' commands An anticipatory workaround for https://docs.aws.amazon.com/cli/latest/userguide/cliv2-migration.html#cliv2-migration-output-pager --- .github/workflows/build.yml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index bd0dea5cf..9c3c87b58 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -119,6 +119,7 @@ jobs: zip -9r circuitpython-stubs.zip circuitpython-stubs [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp circuitpython-stubs.zip s3://adafruit-circuit-python/bin/stubs/circuitpython-stubs-${{ env.CP_VERSION }}.zip --no-progress --region us-east-1 env: + AWS_PAGER: '' AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) @@ -159,6 +160,7 @@ jobs: run: | [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross-macos-catalina-${{ env.CP_VERSION }} --no-progress --region us-east-1 env: + AWS_PAGER: '' AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) @@ -363,6 +365,7 @@ jobs: - name: Upload to S3 run: "[ -z \"$AWS_ACCESS_KEY_ID\" ] || aws s3 cp bin/ s3://adafruit-circuit-python/bin/ --recursive --no-progress --region us-east-1" env: + AWS_PAGER: '' AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) @@ -411,6 +414,7 @@ jobs: - name: Upload to S3 run: "[ -z \"$AWS_ACCESS_KEY_ID\" ] || aws s3 cp bin/ s3://adafruit-circuit-python/bin/ --recursive --no-progress --region us-east-1" env: + AWS_PAGER: '' AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) @@ -505,6 +509,7 @@ jobs: - name: Upload to S3 run: "[ -z \"$AWS_ACCESS_KEY_ID\" ] || aws s3 cp bin/ s3://adafruit-circuit-python/bin/ --recursive --no-progress --region us-east-1" env: + AWS_PAGER: '' AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) -- cgit v1.2.3 From a0d305042c335d55176a8f6951572b1a1b7629ba Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 17 Nov 2020 09:01:50 -0600 Subject: fix ubuntu-latest stragglers --- .github/workflows/build.yml | 2 +- .github/workflows/create_website_pr.yml | 2 +- .github/workflows/pre-commit.yml | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 9c3c87b58..f3e728a05 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -419,7 +419,7 @@ jobs: AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) build-xtensa: - runs-on: ubuntu-latest + runs-on: ubuntu-20.04 needs: test strategy: fail-fast: false diff --git a/.github/workflows/create_website_pr.yml b/.github/workflows/create_website_pr.yml index 71959ffdc..c8aca30e4 100644 --- a/.github/workflows/create_website_pr.yml +++ b/.github/workflows/create_website_pr.yml @@ -10,7 +10,7 @@ on: jobs: website: - runs-on: ubuntu-latest + runs-on: ubuntu-20.04 steps: - name: Dump GitHub context env: diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index eac9bfe09..8caf56d26 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -11,7 +11,7 @@ on: jobs: pre-commit: - runs-on: ubuntu-latest + runs-on: ubuntu-20.04 steps: - uses: actions/checkout@v1 - uses: actions/setup-python@v1 -- cgit v1.2.3 From 1bc770c3dc308b91184e8cab52f6f4cabdda99fc Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 17 Nov 2020 17:31:54 -0600 Subject: esp32s2: PulseIn: Fix supervisor tick enabling Before, there were two problems: * Even if a pulsein was never constructed, supervisor_disable_tick would occur during restart. This could cancel out a supervisor_enable_tick from someplace else, with unexpected results. * If two or more pulseins were constructed, each one would enable ticks, but only the last one deinited (or the reset routine) would disable, leaving ticks running indefinitely. In my testing, it seemed that this led to the board sometimes stopping when it should have auto-reloaded. --- ports/esp32s2/common-hal/pulseio/PulseIn.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/common-hal/pulseio/PulseIn.c b/ports/esp32s2/common-hal/pulseio/PulseIn.c index f7429ec12..9feeea147 100644 --- a/ports/esp32s2/common-hal/pulseio/PulseIn.c +++ b/ports/esp32s2/common-hal/pulseio/PulseIn.c @@ -77,7 +77,9 @@ void pulsein_reset(void) { for (size_t i = 0; i < RMT_CHANNEL_MAX; i++) { handles[i] = NULL; } - supervisor_disable_tick(); + if (refcount != 0) { + supervisor_disable_tick(); + } refcount = 0; } @@ -122,8 +124,10 @@ void common_hal_pulseio_pulsein_construct(pulseio_pulsein_obj_t* self, const mcu // start RMT RX, and enable ticks so the core doesn't turn off. rmt_rx_start(channel, true); - supervisor_enable_tick(); refcount++; + if (refcount == 1) { + supervisor_enable_tick(); + } } bool common_hal_pulseio_pulsein_deinited(pulseio_pulsein_obj_t* self) { -- cgit v1.2.3 From 9206925bf8d2e3d8220b59200ee50c3e4c8a64d2 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 17 Nov 2020 17:45:12 -0600 Subject: esp32s2: port_get_raw_ticks: Use a more efficient, monotonic routine While trying to debug #3572, I noticed that I would frequently break in the midst of gettimeofday and that the routine get_adjusted_boot_time had to take and release locks. Furthermore, we don't want "adjusted" boot time, which could go forwards or backwards depending on the adjustment (such as setting the clock used by gettimeofday() to the network time) --- ports/esp32s2/supervisor/port.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 47d0c7f46..876ad739d 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -191,14 +191,14 @@ uint32_t port_get_saved_word(void) { } uint64_t port_get_raw_ticks(uint8_t* subticks) { - struct timeval tv_now; - gettimeofday(&tv_now, NULL); - // convert usec back to ticks - uint64_t all_subticks = (uint64_t)(tv_now.tv_usec * 2) / 71; + // Convert microseconds to subticks of 1/32768 seconds + // 32768/1000000 = 64/15625 in lowest terms + // this arithmetic overflows after 570 years + int64_t all_subticks = esp_timer_get_time() * 512 / 15625; if (subticks != NULL) { *subticks = all_subticks % 32; } - return (uint64_t)tv_now.tv_sec * 1024L + all_subticks / 32; + return all_subticks / 32; } // Enable 1/1024 second tick. -- cgit v1.2.3 From 8ae7b996278f379b6d40b2d3cf9729b5be53abd9 Mon Sep 17 00:00:00 2001 From: Wellington Terumi Uemura Date: Mon, 16 Nov 2020 23:32:22 +0000 Subject: Translated using Weblate (Portuguese (Brazil)) Currently translated at 100.0% (848 of 848 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pt_BR/ --- locale/pt_BR.po | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 491868979..4cf204ae8 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-10 15:30+0530\n" -"PO-Revision-Date: 2020-11-08 10:26+0000\n" +"PO-Revision-Date: 2020-11-18 00:28+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.3.2\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -447,7 +447,7 @@ msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Bit depth must be from 1 to 6 inclusive, not %d" -msgstr "" +msgstr "A profundidade dos bits deve ser de 1 até 6 inclusive, porém não %d" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." @@ -1025,7 +1025,7 @@ msgstr "O tamanho do buffer está incorreto" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" -msgstr "" +msgstr "A inicialização falhou devido à falta de memória" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" @@ -3705,7 +3705,7 @@ msgstr "os vetores devem ter os mesmos comprimentos" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "watchdog not initialized" -msgstr "" +msgstr "o watchdog não foi inicializado" #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" -- cgit v1.2.3 From 83d790ad8f7838d70269d0f0add6de1199198227 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Wed, 18 Nov 2020 17:45:42 -0600 Subject: esp32s2: don't delete the event loop .. it seems to make the esp-idf grumpy. --- ports/esp32s2/common-hal/wifi/__init__.c | 1 - 1 file changed, 1 deletion(-) diff --git a/ports/esp32s2/common-hal/wifi/__init__.c b/ports/esp32s2/common-hal/wifi/__init__.c index 2eb3719b4..1b244dd2f 100644 --- a/ports/esp32s2/common-hal/wifi/__init__.c +++ b/ports/esp32s2/common-hal/wifi/__init__.c @@ -143,7 +143,6 @@ void wifi_reset(void) { radio->handler_instance_got_ip)); ESP_ERROR_CHECK(esp_wifi_deinit()); esp_netif_destroy(radio->netif); - ESP_ERROR_CHECK(esp_event_loop_delete_default()); radio->netif = NULL; } -- cgit v1.2.3 From 2463a6d6ac3fb53fa471c77bc585c8ef350d2b96 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Wed, 18 Nov 2020 16:28:21 -0800 Subject: Fix Palette grayscale for EInk. It needs to do the bitmasking that was only added to ColorConverter in #3611 --- shared-module/displayio/Palette.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/shared-module/displayio/Palette.c b/shared-module/displayio/Palette.c index facb1fa73..ba5ff665c 100644 --- a/shared-module/displayio/Palette.c +++ b/shared-module/displayio/Palette.c @@ -83,7 +83,8 @@ bool displayio_palette_get_color(displayio_palette_t *self, const _displayio_col uint8_t pixel_hue = self->colors[palette_index].hue; displayio_colorconverter_compute_tricolor(colorspace, pixel_hue, luma, color); } else if (colorspace->grayscale) { - *color = self->colors[palette_index].luma >> (8 - colorspace->depth); + size_t bitmask = (1 << colorspace->depth) - 1; + *color = (self->colors[palette_index].luma >> colorspace->grayscale_bit) & bitmask; } else { uint16_t packed = self->colors[palette_index].rgb565; if (colorspace->reverse_bytes_in_word) { -- cgit v1.2.3 From b98835a1d787f3d1e20eb29bf65ca8cf41d9abf0 Mon Sep 17 00:00:00 2001 From: hexthat Date: Wed, 18 Nov 2020 01:12:46 +0000 Subject: Translated using Weblate (Chinese (Pinyin)) Currently translated at 100.0% (848 of 848 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/zh_Latn/ --- locale/zh_Latn_pinyin.po | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index dd44aab93..e94ae8173 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-10 15:30+0530\n" -"PO-Revision-Date: 2020-11-15 16:28+0000\n" +"PO-Revision-Date: 2020-11-19 01:28+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -1012,7 +1012,7 @@ msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" -msgstr "" +msgstr "yóu yú nèi cún bù zú, chū shǐ huà shī bài" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" @@ -3661,7 +3661,7 @@ msgstr "xiàngliàng bìxū jùyǒu xiāngtóng de chángdù" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "watchdog not initialized" -msgstr "" +msgstr "wèi chū shǐ huà jiān shì qì" #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" -- cgit v1.2.3 From b9bec87f2930787cb1d2f3baea8284985a0062d5 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Wed, 18 Nov 2020 17:38:06 -0800 Subject: Update build board info. * Don't add full urls because they are too large. * Remove the unstable version when it starts with the current version. --- tools/build_board_info.py | 137 +++++++++++++++++++++++----------------------- 1 file changed, 70 insertions(+), 67 deletions(-) diff --git a/tools/build_board_info.py b/tools/build_board_info.py index f83282ea9..ce9d45fe2 100644 --- a/tools/build_board_info.py +++ b/tools/build_board_info.py @@ -19,20 +19,24 @@ import shared_bindings_matrix sys.path.append("adabot") import adabot.github_requests as github -SUPPORTED_PORTS = ["atmel-samd", "cxd56", "esp32s2", "litex", "mimxrt10xx", "nrf", "stm"] - -BIN = ('bin',) -UF2 = ('uf2',) -BIN_UF2 = ('bin', 'uf2') -HEX = ('hex',) -HEX_UF2 = ('hex', 'uf2') -SPK = ('spk',) -DFU = ('dfu',) -BIN_DFU = ('bin', 'dfu') - -# Example: -# https://downloads.circuitpython.org/bin/trinket_m0/en_US/adafruit-circuitpython-trinket_m0-en_US-5.0.0-rc.0.uf2 -DOWNLOAD_BASE_URL = "https://downloads.circuitpython.org/bin" +SUPPORTED_PORTS = [ + "atmel-samd", + "cxd56", + "esp32s2", + "litex", + "mimxrt10xx", + "nrf", + "stm", +] + +BIN = ("bin",) +UF2 = ("uf2",) +BIN_UF2 = ("bin", "uf2") +HEX = ("hex",) +HEX_UF2 = ("hex", "uf2") +SPK = ("spk",) +DFU = ("dfu",) +BIN_DFU = ("bin", "dfu") # Default extensions extension_by_port = { @@ -42,7 +46,7 @@ extension_by_port = { "cxd56": SPK, "mimxrt10xx": HEX_UF2, "litex": DFU, - "esp32s2": BIN_UF2 + "esp32s2": BIN_UF2, } # Per board overrides @@ -57,26 +61,28 @@ extension_by_board = { "feather_m0_rfm69": BIN_UF2, "feather_m0_rfm9x": BIN_UF2, "uchip": BIN_UF2, - # nRF52840 dev kits that may not have UF2 bootloaders, "makerdiary_nrf52840_mdk": HEX, "makerdiary_nrf52840_mdk_usb_dongle": HEX_UF2, "pca10056": BIN_UF2, "pca10059": BIN_UF2, "electronut_labs_blip": HEX, - # stm32 - "meowbit_v121": UF2 + "meowbit_v121": UF2, } aliases_by_board = { - "circuitplayground_express": ["circuitplayground_express_4h", "circuitplayground_express_digikey_pycon2019"], + "circuitplayground_express": [ + "circuitplayground_express_4h", + "circuitplayground_express_digikey_pycon2019", + ], "pybadge": ["edgebadge"], "pyportal": ["pyportal_pynt"], "gemma_m0": ["gemma_m0_pycon2018"], - "pewpew10": ["pewpew13"] + "pewpew10": ["pewpew13"], } + def get_languages(): languages = [] for f in os.scandir("../locale"): @@ -84,6 +90,7 @@ def get_languages(): languages.append(f.name[:-3]) return languages + def get_board_mapping(): boards = {} for port in SUPPORTED_PORTS: @@ -95,23 +102,30 @@ def get_board_mapping(): extensions = extension_by_port[port] extensions = extension_by_board.get(board_path.name, extensions) aliases = aliases_by_board.get(board_path.name, []) - boards[board_id] = {"port": port, - "extensions": extensions, - "download_count": 0, - "aliases": aliases} + boards[board_id] = { + "port": port, + "extensions": extensions, + "download_count": 0, + "aliases": aliases, + } for alias in aliases: - boards[alias] = {"port": port, - "extensions": extensions, - "download_count": 0, - "alias": True, - "aliases": []} + boards[alias] = { + "port": port, + "extensions": extensions, + "download_count": 0, + "alias": True, + "aliases": [], + } return boards + def get_version_info(): version = None sha = git("rev-parse", "--short", "HEAD").stdout.decode("utf-8") try: - version = git("describe", "--tags", "--exact-match").stdout.decode("utf-8").strip() + version = ( + git("describe", "--tags", "--exact-match").stdout.decode("utf-8").strip() + ) except sh.ErrorReturnCode_128: # No exact match pass @@ -120,10 +134,11 @@ def get_version_info(): sha = os.environ["GITHUB_SHA"] if not version: - version="{}-{}".format(date.today().strftime("%Y%m%d"), sha[:7]) + version = "{}-{}".format(date.today().strftime("%Y%m%d"), sha[:7]) return sha, version + def get_current_info(): response = github.get("/repos/adafruit/circuitpython-org/git/refs/heads/master") if not response.ok: @@ -131,7 +146,9 @@ def get_current_info(): raise RuntimeError("cannot get master sha") commit_sha = response.json()["object"]["sha"] - response = github.get("/repos/adafruit/circuitpython-org/contents/_data/files.json?ref=" + commit_sha) + response = github.get( + "/repos/adafruit/circuitpython-org/contents/_data/files.json?ref=" + commit_sha + ) if not response.ok: print(response.text) raise RuntimeError("cannot get previous files.json") @@ -145,6 +162,7 @@ def get_current_info(): current_info[info["id"]] = info return git_info, current_info + def create_pr(changes, updated, git_info, user): commit_sha, original_blob_sha = git_info branch_name = "new_release_" + changes["new_release"] @@ -158,7 +176,7 @@ def create_pr(changes, updated, git_info, user): updated_list.append(info) updated = json.dumps(updated_list, sort_keys=True, indent=1).encode("utf-8") + b"\n" - #print(updated.decode("utf-8")) + # print(updated.decode("utf-8")) pr_title = "Automated website update for release {}".format(changes["new_release"]) boards = "" if changes["new_boards"]: @@ -167,16 +185,13 @@ def create_pr(changes, updated, git_info, user): if changes["new_languages"]: languages = "New languages:\n* " + "\n* ".join(changes["new_languages"]) message = "Automated website update for release {} by Blinka.\n\n{}\n\n{}\n".format( - changes["new_release"], - boards, - languages + changes["new_release"], boards, languages ) - create_branch = { - "ref": "refs/heads/" + branch_name, - "sha": commit_sha - } - response = github.post("/repos/{}/circuitpython-org/git/refs".format(user), json=create_branch) + create_branch = {"ref": "refs/heads/" + branch_name, "sha": commit_sha} + response = github.post( + "/repos/{}/circuitpython-org/git/refs".format(user), json=create_branch + ) if not response.ok and response.json()["message"] != "Reference already exists": print("unable to create branch") print(response.text) @@ -186,10 +201,13 @@ def create_pr(changes, updated, git_info, user): "message": message, "content": base64.b64encode(updated).decode("utf-8"), "sha": original_blob_sha, - "branch": branch_name + "branch": branch_name, } - response = github.put("/repos/{}/circuitpython-org/contents/_data/files.json".format(user), json=update_file) + response = github.put( + "/repos/{}/circuitpython-org/contents/_data/files.json".format(user), + json=update_file, + ) if not response.ok: print("unable to post new file") print(response.text) @@ -199,7 +217,7 @@ def create_pr(changes, updated, git_info, user): "head": user + ":" + branch_name, "base": "master", "body": message, - "maintainer_can_modify": True + "maintainer_can_modify": True, } response = github.post("/repos/adafruit/circuitpython-org/pulls", json=pr_info) if not response.ok: @@ -220,17 +238,14 @@ def print_active_user(): print("Not logged in") return None + def generate_download_info(): boards = {} errors = [] new_tag = os.environ["RELEASE_TAG"] - changes = { - "new_release": new_tag, - "new_boards": [], - "new_languages": [] - } + changes = {"new_release": new_tag, "new_boards": [], "new_languages": []} user = print_active_user() @@ -254,8 +269,9 @@ def generate_download_info(): info = current_info[board] for version in info["versions"]: previous_releases.add(version["version"]) - previous_languages.update(version["files"].keys()) - if version["stable"] == new_stable: + if version["stable"] == new_stable or ( + new_stable and version["version"].startswith(this_version) + ): info["versions"].remove(version) board_mapping = get_board_mapping() @@ -272,29 +288,15 @@ def generate_download_info(): alias_info = board_mapping[alias] if alias not in current_info: changes["new_boards"].append(alias) - current_info[alias] = {"downloads": 0, - "versions": []} + current_info[alias] = {"downloads": 0, "versions": []} new_version = { "stable": new_stable, "version": new_tag, "modules": support_matrix.get(alias, "[]"), - "files": {}, "languages": languages, - "extensions": board_info["extensions"] + "extensions": board_info["extensions"], } - for language in languages: - files = [] - new_version["files"][language] = files - for extension in board_info["extensions"]: - files.append( - "{base_url}/{alias}/{language}/adafruit-circuitpython-{alias}-{language}-{tag}.{extension}" - .format( - base_url=DOWNLOAD_BASE_URL, - tag=new_tag, - alias=alias, - language=language, - extension=extension)) current_info[alias]["downloads"] = alias_info["download_count"] current_info[alias]["versions"].append(new_version) @@ -305,6 +307,7 @@ def generate_download_info(): else: print("No new release to update") + if __name__ == "__main__": if "RELEASE_TAG" in os.environ and os.environ["RELEASE_TAG"]: generate_download_info() -- cgit v1.2.3 From 76d4824728c6dc99d9bfed48a41933fa48c8bbf7 Mon Sep 17 00:00:00 2001 From: Kamil Tomaszewski Date: Thu, 19 Nov 2020 15:04:52 +0100 Subject: spresense: Return fixed stack --- ports/cxd56/supervisor/port.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/ports/cxd56/supervisor/port.c b/ports/cxd56/supervisor/port.c index 92d335cd5..086c2d198 100644 --- a/ports/cxd56/supervisor/port.c +++ b/ports/cxd56/supervisor/port.c @@ -98,8 +98,12 @@ void reset_to_bootloader(void) { } } +supervisor_allocation _fixed_stack; + supervisor_allocation* port_fixed_stack(void) { - return NULL; + _fixed_stack.ptr = port_stack_get_limit(); + _fixed_stack.length = (port_stack_get_top() - port_stack_get_limit()) * sizeof(uint32_t); + return &_fixed_stack; } uint32_t *port_stack_get_limit(void) { -- cgit v1.2.3 From dd108b755dc2bb886df14c9fcfcd4f09be61f2d4 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 19 Nov 2020 11:36:02 -0600 Subject: esp32s2: initialize event loop ane netif only once deinitting these seems to cause problems. --- ports/esp32s2/common-hal/wifi/__init__.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/ports/esp32s2/common-hal/wifi/__init__.c b/ports/esp32s2/common-hal/wifi/__init__.c index 1b244dd2f..f53e68fc2 100644 --- a/ports/esp32s2/common-hal/wifi/__init__.c +++ b/ports/esp32s2/common-hal/wifi/__init__.c @@ -88,14 +88,17 @@ static void event_handler(void* arg, esp_event_base_t event_base, } } -static bool wifi_inited; +static bool wifi_inited, wifi_ever_inited; void common_hal_wifi_init(void) { wifi_inited = true; common_hal_wifi_radio_obj.base.type = &wifi_radio_type; - ESP_ERROR_CHECK(esp_netif_init()); - ESP_ERROR_CHECK(esp_event_loop_create_default()); + if (!wifi_ever_inited) { + ESP_ERROR_CHECK(esp_netif_init()); + ESP_ERROR_CHECK(esp_event_loop_create_default()); + } + wifi_ever_inited = true; wifi_radio_obj_t* self = &common_hal_wifi_radio_obj; self->netif = esp_netif_create_default_wifi_sta(); -- cgit v1.2.3