From 0ff20cdd85d742c2668b044474b2ddc29546fc9c Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 9 Nov 2020 08:27:20 -0600 Subject: RGBMatrix: Detect invalid bit_depth selection Closes: #3650 --- shared-bindings/rgbmatrix/RGBMatrix.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/shared-bindings/rgbmatrix/RGBMatrix.c b/shared-bindings/rgbmatrix/RGBMatrix.c index 753c1c920..5f5ea4fae 100644 --- a/shared-bindings/rgbmatrix/RGBMatrix.c +++ b/shared-bindings/rgbmatrix/RGBMatrix.c @@ -197,6 +197,11 @@ STATIC mp_obj_t rgbmatrix_rgbmatrix_make_new(const mp_obj_type_t *type, size_t n uint8_t clock_pin = validate_pin(args[ARG_clock_pin].u_obj); uint8_t latch_pin = validate_pin(args[ARG_latch_pin].u_obj); uint8_t output_enable_pin = validate_pin(args[ARG_output_enable_pin].u_obj); + int bit_depth = args[ARG_bit_depth].u_int; + + if (bit_depth <= 0 || bit_depth > 6) { + mp_raise_ValueError_varg(translate("Bit depth must be from 1 to 6 inclusive, not %d"), bit_depth); + } validate_pins(MP_QSTR_rgb_pins, rgb_pins, MP_ARRAY_SIZE(self->rgb_pins), args[ARG_rgb_list].u_obj, &rgb_count); validate_pins(MP_QSTR_addr_pins, addr_pins, MP_ARRAY_SIZE(self->addr_pins), args[ARG_addr_list].u_obj, &addr_count); @@ -229,7 +234,7 @@ STATIC mp_obj_t rgbmatrix_rgbmatrix_make_new(const mp_obj_type_t *type, size_t n common_hal_rgbmatrix_rgbmatrix_construct(self, args[ARG_width].u_int, - args[ARG_bit_depth].u_int, + bit_depth, rgb_count, rgb_pins, addr_count, addr_pins, clock_pin, latch_pin, output_enable_pin, -- cgit v1.2.3 From 5554c27600291786c5f09b1671ef5e29eae22619 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 9 Nov 2020 09:49:43 -0600 Subject: make translate --- locale/circuitpython.pot | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index a5581e7fa..3fb2f0719 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-10-15 16:06+0530\n" +"POT-Creation-Date: 2020-11-09 09:49-0600\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -416,6 +416,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "" @@ -2863,14 +2868,6 @@ msgstr "" msgid "maximum recursion depth exceeded" msgstr "" -#: extmod/ulab/code/approx/approx.c -msgid "maxiter must be > 0" -msgstr "" - -#: extmod/ulab/code/approx/approx.c -msgid "maxiter should be > 0" -msgstr "" - #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3303,10 +3300,6 @@ msgstr "" msgid "sort argument must be an ndarray" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "sorted axis can't be longer than 65535" -msgstr "" - #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" -- cgit v1.2.3 From 6c59836c5db03744d7dbef01c2323989d13ef02a Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Tue, 10 Nov 2020 16:32:46 +0530 Subject: watchdog implementation for esp32s2 --- locale/circuitpython.pot | 15 +++- .../esp32s2/common-hal/microcontroller/__init__.c | 11 +++ ports/esp32s2/common-hal/watchdog/WatchDogMode.c | 1 + ports/esp32s2/common-hal/watchdog/WatchDogTimer.c | 86 ++++++++++++++++++++++ ports/esp32s2/common-hal/watchdog/WatchDogTimer.h | 44 +++++++++++ ports/esp32s2/common-hal/watchdog/__init__.c | 1 + ports/esp32s2/mpconfigport.mk | 1 + 7 files changed, 157 insertions(+), 2 deletions(-) create mode 100644 ports/esp32s2/common-hal/watchdog/WatchDogMode.c create mode 100644 ports/esp32s2/common-hal/watchdog/WatchDogTimer.c create mode 100644 ports/esp32s2/common-hal/watchdog/WatchDogTimer.h create mode 100644 ports/esp32s2/common-hal/watchdog/__init__.c diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index b4445abfb..7a39e9a32 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -296,7 +296,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -992,6 +993,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3201,6 +3206,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3416,6 +3422,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3599,6 +3606,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/ports/esp32s2/common-hal/microcontroller/__init__.c b/ports/esp32s2/common-hal/microcontroller/__init__.c index 6b2e18673..e5cfc7eef 100644 --- a/ports/esp32s2/common-hal/microcontroller/__init__.c +++ b/ports/esp32s2/common-hal/microcontroller/__init__.c @@ -85,6 +85,17 @@ const mcu_processor_obj_t common_hal_mcu_processor_obj = { }, }; +#if CIRCUITPY_WATCHDOG +// The singleton watchdog.WatchDogTimer object. +watchdog_watchdogtimer_obj_t common_hal_mcu_watchdogtimer_obj = { + .base = { + .type = &watchdog_watchdogtimer_type, + }, + .timeout = 0.0f, + .mode = WATCHDOGMODE_NONE, +}; +#endif + // This maps MCU pin names to pin objects. STATIC const mp_rom_map_elem_t mcu_pin_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_GPIO0), MP_ROM_PTR(&pin_GPIO0) }, diff --git a/ports/esp32s2/common-hal/watchdog/WatchDogMode.c b/ports/esp32s2/common-hal/watchdog/WatchDogMode.c new file mode 100644 index 000000000..fc4e0e008 --- /dev/null +++ b/ports/esp32s2/common-hal/watchdog/WatchDogMode.c @@ -0,0 +1 @@ +// No watchdog module functions. diff --git a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c new file mode 100644 index 000000000..59b9dafcf --- /dev/null +++ b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c @@ -0,0 +1,86 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "py/runtime.h" +#include "common-hal/watchdog/WatchDogTimer.h" + +#include "shared-bindings/microcontroller/__init__.h" + +#include "esp_task_wdt.h" + +void esp_task_wdt_isr_user_handler(void) { + +} + +void common_hal_watchdog_feed(watchdog_watchdogtimer_obj_t *self) { + if (esp_task_wdt_reset() != ESP_OK) { + mp_raise_RuntimeError(translate("watchdog not initialized")); + } +} + +void common_hal_watchdog_deinit(watchdog_watchdogtimer_obj_t *self) { + if (esp_task_wdt_deinit() == ESP_OK) { + self->mode = WATCHDOGMODE_NONE; + } +} + +void watchdog_reset(void) { + common_hal_watchdog_deinit(&common_hal_mcu_watchdogtimer_obj); +} + +static void wdt_config(watchdog_watchdogtimer_obj_t *self) { + // enable panic hanler in WATCHDOGMODE_RESET mode + // initialize Task Watchdog Timer (TWDT) + if (esp_task_wdt_init((uint32_t)self->timeout, (self->mode == WATCHDOGMODE_RESET)) != ESP_OK) { + mp_raise_RuntimeError(translate("Initialization failed due to lack of memory")); + } + esp_task_wdt_add(NULL); +} + +mp_float_t common_hal_watchdog_get_timeout(watchdog_watchdogtimer_obj_t *self) { + return self->timeout; +} + +void common_hal_watchdog_set_timeout(watchdog_watchdogtimer_obj_t *self, mp_float_t new_timeout) { + if ((uint64_t)new_timeout > UINT32_MAX) { + mp_raise_ValueError(translate("timeout duration exceeded the maximum supported value")); + } + if ((uint32_t)self->timeout != (uint32_t)new_timeout) { + self->timeout = new_timeout; + wdt_config(self); + } +} + +watchdog_watchdogmode_t common_hal_watchdog_get_mode(watchdog_watchdogtimer_obj_t *self) { + return self->mode; +} + +void common_hal_watchdog_set_mode(watchdog_watchdogtimer_obj_t *self, watchdog_watchdogmode_t new_mode) { + if (self->mode != new_mode) { + self->mode = new_mode; + wdt_config(self); + } +} diff --git a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h new file mode 100644 index 000000000..05e0e954d --- /dev/null +++ b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h @@ -0,0 +1,44 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_WATCHDOG_WATCHDOGTIMER_H +#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_WATCHDOG_WATCHDOGTIMER_H + +#include "py/obj.h" +#include "shared-bindings/watchdog/WatchDogMode.h" +#include "shared-bindings/watchdog/WatchDogTimer.h" + +struct _watchdog_watchdogtimer_obj_t { + mp_obj_base_t base; + mp_float_t timeout; + watchdog_watchdogmode_t mode; +}; + +// This needs to be called in order to disable the watchdog if it's set to +// "RAISE". If set to "RESET", then the watchdog cannot be reset. +void watchdog_reset(void); + +#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_WATCHDOG_WATCHDOGTIMER_H diff --git a/ports/esp32s2/common-hal/watchdog/__init__.c b/ports/esp32s2/common-hal/watchdog/__init__.c new file mode 100644 index 000000000..fc4e0e008 --- /dev/null +++ b/ports/esp32s2/common-hal/watchdog/__init__.c @@ -0,0 +1 @@ +// No watchdog module functions. diff --git a/ports/esp32s2/mpconfigport.mk b/ports/esp32s2/mpconfigport.mk index 4579b95ab..335d2caf7 100644 --- a/ports/esp32s2/mpconfigport.mk +++ b/ports/esp32s2/mpconfigport.mk @@ -25,6 +25,7 @@ CIRCUITPY_NVM = 0 # We don't have enough endpoints to include MIDI. CIRCUITPY_USB_MIDI = 0 CIRCUITPY_WIFI = 1 +CIRCUITPY_WATCHDOG ?= 1 CIRCUITPY_ESPIDF = 1 ifndef CIRCUITPY_TOUCHIO_USE_NATIVE -- cgit v1.2.3 From b293aa7e0961f907ff49c28e3a169112cd1d0b3e Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 10 Nov 2020 09:12:16 -0600 Subject: protomatter: Update to upstream tag 1.0.10 Among other things this fixes a problem with blanking the display and Closes #3664. --- lib/protomatter | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/protomatter b/lib/protomatter index de6b7704c..902c16f49 160000 --- a/lib/protomatter +++ b/lib/protomatter @@ -1 +1 @@ -Subproject commit de6b7704c530d886ad8dfa0fa1864764d86117ee +Subproject commit 902c16f49197a8baf5e71ec924a812a86e733a74 -- cgit v1.2.3 From 10e8b8cf456b36b6e1e1582601a3fc437727cec5 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Wed, 11 Nov 2020 00:24:01 +0530 Subject: move port specific check --- ports/nrf/common-hal/watchdog/WatchDogTimer.c | 3 +++ shared-bindings/watchdog/WatchDogTimer.c | 7 +------ 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/ports/nrf/common-hal/watchdog/WatchDogTimer.c b/ports/nrf/common-hal/watchdog/WatchDogTimer.c index bec0ac473..539b43e76 100644 --- a/ports/nrf/common-hal/watchdog/WatchDogTimer.c +++ b/ports/nrf/common-hal/watchdog/WatchDogTimer.c @@ -93,6 +93,9 @@ void common_hal_watchdog_feed(watchdog_watchdogtimer_obj_t *self) { } void common_hal_watchdog_deinit(watchdog_watchdogtimer_obj_t *self) { + if (self->mode == WATCHDOGMODE_RESET) { + mp_raise_NotImplementedError(translate("WatchDogTimer cannot be deinitialized once mode is set to RESET")); + } if (timer) { timer_free(); } diff --git a/shared-bindings/watchdog/WatchDogTimer.c b/shared-bindings/watchdog/WatchDogTimer.c index 09219f710..575021a21 100644 --- a/shared-bindings/watchdog/WatchDogTimer.c +++ b/shared-bindings/watchdog/WatchDogTimer.c @@ -66,6 +66,7 @@ STATIC mp_obj_t watchdog_watchdogtimer_feed(mp_obj_t self_in) { if (current_mode == WATCHDOGMODE_NONE) { mp_raise_ValueError(translate("WatchDogTimer is not currently running")); } + common_hal_watchdog_feed(self); return mp_const_none; } @@ -78,12 +79,6 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(watchdog_watchdogtimer_feed_obj, watchdog_watch //| STATIC mp_obj_t watchdog_watchdogtimer_deinit(mp_obj_t self_in) { watchdog_watchdogtimer_obj_t *self = MP_OBJ_TO_PTR(self_in); - watchdog_watchdogmode_t current_mode = common_hal_watchdog_get_mode(self); - - if (current_mode == WATCHDOGMODE_RESET) { - mp_raise_NotImplementedError(translate("WatchDogTimer cannot be deinitialized once mode is set to RESET")); - } - common_hal_watchdog_deinit(self); return mp_const_none; } -- cgit v1.2.3 From 1192eebcdf3fbfa383a868d3a349535858e3e0e3 Mon Sep 17 00:00:00 2001 From: foamyguy Date: Tue, 10 Nov 2020 14:12:44 -0600 Subject: adding spi and i2c to board for um feather s2 --- ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h index 5a885f29c..b320fdc8d 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h @@ -37,3 +37,10 @@ // #define MICROPY_HW_APA102_MOSI (&pin_GPIO40) // #define MICROPY_HW_APA102_SCK (&pin_GPIO45) + +#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9) +#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8) + +#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) +#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) \ No newline at end of file -- cgit v1.2.3 From b8f83643b532cfbd76b93f8a88dcf599f6e43c68 Mon Sep 17 00:00:00 2001 From: Szymon Jakubiak Date: Tue, 10 Nov 2020 20:52:38 +0000 Subject: Translated using Weblate (Polish) Currently translated at 70.7% (598 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pl/ --- locale/pl.po | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/locale/pl.po b/locale/pl.po index 54ef4d918..e3081544c 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -7,8 +7,8 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-09-29 01:39+0000\n" -"Last-Translator: Maciej Stankiewicz \n" +"PO-Revision-Date: 2020-11-10 20:52+0000\n" +"Last-Translator: Szymon Jakubiak \n" "Language-Team: pl\n" "Language: pl\n" "MIME-Version: 1.0\n" @@ -16,7 +16,7 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " "|| n%100>=20) ? 1 : 2;\n" -"X-Generator: Weblate 4.3-dev\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -76,7 +76,7 @@ msgstr "%q poza zakresem" #: py/obj.c msgid "%q indices must be integers, not %q" -msgstr "" +msgstr "%q indeksy muszą być liczbami typu int, a nie %q" #: shared-bindings/vectorio/Polygon.c msgid "%q list must be a list" @@ -104,7 +104,7 @@ msgstr "%q poza zakresem" #: ports/atmel-samd/common-hal/microcontroller/Pin.c msgid "%q pin invalid" -msgstr "" +msgstr "%q nieprawidłowy pin" #: shared-bindings/fontio/BuiltinFont.c msgid "%q should be an int" -- cgit v1.2.3 From b9294818da33853088957d913ef497db92584c18 Mon Sep 17 00:00:00 2001 From: Maciej Stankiewicz Date: Tue, 10 Nov 2020 20:50:02 +0000 Subject: Translated using Weblate (Polish) Currently translated at 70.7% (598 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pl/ --- locale/pl.po | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/locale/pl.po b/locale/pl.po index e3081544c..ae532a73f 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -8,7 +8,7 @@ msgstr "" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: 2020-11-10 20:52+0000\n" -"Last-Translator: Szymon Jakubiak \n" +"Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" "Language: pl\n" "MIME-Version: 1.0\n" @@ -1206,7 +1206,7 @@ msgstr "" #: shared-module/displayio/Group.c msgid "Layer must be a Group or TileGrid subclass." -msgstr "Layer musi dziedziczyć z Group albo TileGrid" +msgstr "Layer musi dziedziczyć z Group albo TileGrid." #: py/objslice.c msgid "Length must be an int" -- cgit v1.2.3 From a1276be482e46c08f4ad189f9c22ee724d9d82de Mon Sep 17 00:00:00 2001 From: Maciej Stankiewicz Date: Tue, 10 Nov 2020 21:06:44 +0000 Subject: Translated using Weblate (Polish) Currently translated at 71.5% (605 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pl/ --- locale/pl.po | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/locale/pl.po b/locale/pl.po index ae532a73f..fbae67695 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-10 20:52+0000\n" +"PO-Revision-Date: 2020-11-10 21:10+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" "Language: pl\n" @@ -104,7 +104,7 @@ msgstr "%q poza zakresem" #: ports/atmel-samd/common-hal/microcontroller/Pin.c msgid "%q pin invalid" -msgstr "%q nieprawidłowy pin" +msgstr "nieprawidłowy pin %q" #: shared-bindings/fontio/BuiltinFont.c msgid "%q should be an int" @@ -254,7 +254,7 @@ msgstr "'return' poza funkcją" #: py/compile.c msgid "'yield from' inside async function" -msgstr "" +msgstr "'yield from' wewnątrz funkcji asynchronicznej" #: py/compile.c msgid "'yield' outside function" @@ -283,7 +283,7 @@ msgstr "Kanał przerwań sprzętowych w użyciu" #: ports/esp32s2/common-hal/analogio/AnalogIn.c msgid "ADC2 is being used by WiFi" -msgstr "" +msgstr "ADC2 jest używany przez WiFi" #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format @@ -1033,7 +1033,7 @@ msgstr "Błąd wewnętrzny #%d" #: shared-bindings/sdioio/SDCard.c msgid "Invalid %q" -msgstr "" +msgstr "Nieprawidłowe %q" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c @@ -1107,7 +1107,7 @@ msgstr "Zła wielkość fragmentu formatu" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "Invalid frequency" -msgstr "" +msgstr "Nieprawidłowa częstotliwość" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" @@ -1344,7 +1344,7 @@ msgstr "" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more channels available" -msgstr "" +msgstr "Brak dostępnych kanałów" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more timers available" @@ -1436,7 +1436,7 @@ msgstr "" #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" -msgstr "" +msgstr "W danym momencie przezroczysty może być tylko jeden kolor" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" @@ -1505,7 +1505,7 @@ msgstr "Oraz moduły w systemie plików\n" #: shared-module/vectorio/Polygon.c msgid "Polygon needs at least 3 points" -msgstr "" +msgstr "Wielokąt musi mieć co najmniej 3 punkty" #: ports/esp32s2/common-hal/pulseio/PulseOut.c msgid "" -- cgit v1.2.3 From 8373146c56707102626e6d51d98bd87cdd43ba27 Mon Sep 17 00:00:00 2001 From: foamyguy Date: Tue, 10 Nov 2020 15:29:17 -0600 Subject: newline end of file --- ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h index b320fdc8d..ec49fcadf 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h @@ -43,4 +43,4 @@ #define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) #define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) -#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) \ No newline at end of file +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) -- cgit v1.2.3 From 9da99675b162742c0ecbd0995ce35e62204be3b1 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Tue, 10 Nov 2020 16:44:09 -0800 Subject: Correct display sequence format docs --- shared-bindings/displayio/Display.c | 22 ++++++++++++---------- shared-bindings/displayio/EPaperDisplay.c | 11 ++++++----- 2 files changed, 18 insertions(+), 15 deletions(-) diff --git a/shared-bindings/displayio/Display.c b/shared-bindings/displayio/Display.c index 1ed59f233..8d1a888fe 100644 --- a/shared-bindings/displayio/Display.c +++ b/shared-bindings/displayio/Display.c @@ -58,24 +58,26 @@ //| r"""Create a Display object on the given display bus (`FourWire`, `ParallelBus` or `I2CDisplay`). //| //| The ``init_sequence`` is bitpacked to minimize the ram impact. Every command begins with a -//| command byte followed by a byte to determine the parameter count and if a delay is need after. -//| When the top bit of the second byte is 1, the next byte will be the delay time in milliseconds. -//| The remaining 7 bits are the parameter count excluding any delay byte. The third through final -//| bytes are the remaining command parameters. The next byte will begin a new command definition. -//| Here is a portion of ILI9341 init code: +//| command byte followed by a byte to determine the parameter count and delay. When the top bit +//| of the second byte is 1 (0x80), a delay will occur after the command parameters are sent. +//| The remaining 7 bits are the parameter count excluding any delay byte. The bytes following +//| are the parameters. When the delay bit is set, a single byte after the parameters specifies +//| the delay duration in milliseconds. The value 0xff will lead to an extra long 500 ms delay +//| instead of 255 ms. The next byte will begin a new command definition. +//| Here is an example: //| //| .. code-block:: python //| //| init_sequence = (b"\xe1\x0f\x00\x0E\x14\x03\x11\x07\x31\xC1\x48\x08\x0F\x0C\x31\x36\x0F" # Set Gamma //| b"\x11\x80\x78"# Exit Sleep then delay 0x78 (120ms) -//| b"\x29\x80\x78"# Display on then delay 0x78 (120ms) +//| b"\x29\x81\xaa\x78"# Display on then delay 0x78 (120ms) //| ) //| display = displayio.Display(display_bus, init_sequence, width=320, height=240) //| -//| The first command is 0xe1 with 15 (0xf) parameters following. The second and third are 0x11 and -//| 0x29 respectively with delays (0x80) of 120ms (0x78) and no parameters. Multiple byte literals -//| (b"") are merged together on load. The parens are needed to allow byte literals on subsequent -//| lines. +//| The first command is 0xe1 with 15 (0xf) parameters following. The second is 0x11 with 0 +//| parameters and a 120ms (0x78) delay. The third command is 0x29 with one parameter 0xaa and a +//| 120ms delay (0x78). Multiple byte literals (b"") are merged together on load. The parens +//| are needed to allow byte literals on subsequent lines. //| //| The initialization sequence should always leave the display memory access inline with the scan //| of the display to minimize tearing artifacts. diff --git a/shared-bindings/displayio/EPaperDisplay.c b/shared-bindings/displayio/EPaperDisplay.c index e0326d9c8..8518e3714 100644 --- a/shared-bindings/displayio/EPaperDisplay.c +++ b/shared-bindings/displayio/EPaperDisplay.c @@ -65,11 +65,12 @@ //| """Create a EPaperDisplay object on the given display bus (`displayio.FourWire` or `displayio.ParallelBus`). //| //| The ``start_sequence`` and ``stop_sequence`` are bitpacked to minimize the ram impact. Every -//| command begins with a command byte followed by a byte to determine the parameter count and if -//| a delay is need after. When the top bit of the second byte is 1, the next byte will be the -//| delay time in milliseconds. The remaining 7 bits are the parameter count excluding any delay -//| byte. The third through final bytes are the remaining command parameters. The next byte will -//| begin a new command definition. +//| command begins with a command byte followed by a byte to determine the parameter count and +//| delay. When the top bit of the second byte is 1 (0x80), a delay will occur after the command +//| parameters are sent. The remaining 7 bits are the parameter count excluding any delay +//| byte. The bytes following are the parameters. When the delay bit is set, a single byte after +//| the parameters specifies the delay duration in milliseconds. The value 0xff will lead to an +//| extra long 500 ms delay instead of 255 ms. The next byte will begin a new command definition. //| //| :param display_bus: The bus that the display is connected to //| :type _DisplayBus: displayio.FourWire or displayio.ParallelBus -- cgit v1.2.3 From f9842566d8c5fe88cda2e153f1beb897aaca993a Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Wed, 11 Nov 2020 10:22:48 +0530 Subject: Add default pin definitions --- ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h index b87b5dfa0..272ab20fa 100644 --- a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +++ b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h @@ -25,7 +25,6 @@ */ //Micropython setup - #define MICROPY_HW_BOARD_NAME "microS2" #define MICROPY_HW_MCU_NAME "ESP32S2" @@ -33,8 +32,20 @@ #define MICROPY_HW_BUTTON (&pin_GPIO0) #define MICROPY_HW_NEOPIXEL (&pin_GPIO33) +// Default bus pins +#define DEFAULT_I2C_BUS_SCL (&pin_GPIO1) +#define DEFAULT_I2C_BUS_SDA (&pin_GPIO2) + +#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) +#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) + +#define DEFAULT_UART_BUS_TX (&pin_GPIO43) +#define DEFAULT_UART_BUS_RX (&pin_GPIO44) + #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) +// Explanation of how a user got into safe mode. #define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n") #define AUTORESET_DELAY_MS 500 -- cgit v1.2.3 From 118ca7cff44bc3aa50e57915e691e1b8c2f4e563 Mon Sep 17 00:00:00 2001 From: foamyguy Date: Wed, 11 Nov 2020 06:56:57 -0600 Subject: adding default uart pins --- ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h index ec49fcadf..b68a31b9e 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h @@ -44,3 +44,6 @@ #define DEFAULT_SPI_BUS_SCK (&pin_GPIO36) #define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35) #define DEFAULT_SPI_BUS_MISO (&pin_GPIO37) + +#define DEFAULT_UART_BUS_RX (&pin_GPIO44) +#define DEFAULT_UART_BUS_TX (&pin_GPIO43) -- cgit v1.2.3 From 9817672df7905a63ac168afd1792a46196864209 Mon Sep 17 00:00:00 2001 From: Dan Halbert Date: Wed, 11 Nov 2020 14:06:34 -0500 Subject: make translate on 6.0.x --- locale/circuitpython.pot | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 3fb2f0719..931ae6a42 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-09 09:49-0600\n" +"POT-Creation-Date: 2020-11-11 14:06-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -2868,6 +2868,14 @@ msgstr "" msgid "maximum recursion depth exceeded" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "maxiter must be > 0" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "maxiter should be > 0" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3300,6 +3308,10 @@ msgstr "" msgid "sort argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "sorted axis can't be longer than 65535" +msgstr "" + #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" -- cgit v1.2.3 From 53e9c7b3bc0b1162028789445c2e430c06507a50 Mon Sep 17 00:00:00 2001 From: Maciej Stankiewicz Date: Tue, 10 Nov 2020 21:19:44 +0000 Subject: Translated using Weblate (Polish) Currently translated at 72.1% (610 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pl/ --- locale/pl.po | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/locale/pl.po b/locale/pl.po index fbae67695..1b0b41fdf 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-10 21:10+0000\n" +"PO-Revision-Date: 2020-11-11 19:13+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" "Language: pl\n" @@ -1817,7 +1817,7 @@ msgstr "" #: ports/stm/common-hal/busio/UART.c msgid "UART write error" -msgstr "" +msgstr "Błąd zapisu UART" #: shared-module/usb_hid/Device.c msgid "USB Busy" @@ -2014,7 +2014,7 @@ msgstr "__init__() powinien zwracać None" #: py/objtype.c msgid "__init__() should return None, not '%q'" -msgstr "" +msgstr "__init__() powinno zwrócić None, a nie '%q'" #: py/objobject.c msgid "__new__ arg must be a user-type" @@ -3057,11 +3057,11 @@ msgstr "nie dość argumentów przy formatowaniu" #: extmod/ulab/code/poly/poly.c msgid "number of arguments must be 2, or 3" -msgstr "" +msgstr "liczba argumentów musi wynosić 2 lub 3" #: extmod/ulab/code/ulab_create.c msgid "number of points must be at least 2" -msgstr "" +msgstr "liczba punktów musi wynosić co najmniej 2" #: py/obj.c msgid "object '%q' is not a tuple or list" @@ -3374,7 +3374,7 @@ msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "source palette too large" -msgstr "" +msgstr "źródłowa paleta jest zbyt duża" #: py/objstr.c msgid "start/end indices" -- cgit v1.2.3 From c96a86bd8a23cf5d238fabc83790d48b39fccd2c Mon Sep 17 00:00:00 2001 From: hexthat Date: Wed, 11 Nov 2020 08:03:23 +0000 Subject: Translated using Weblate (Chinese (Pinyin)) Currently translated at 100.0% (845 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/zh_Latn/ --- locale/zh_Latn_pinyin.po | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index c1853a73a..4d45f65bd 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-10-28 21:45+0000\n" +"PO-Revision-Date: 2020-11-11 19:13+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -15,7 +15,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Weblate 4.3.2-dev\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -304,7 +304,7 @@ msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng" #: ports/esp32s2/peripherals/pcnt_handler.c msgid "All PCNT units in use" -msgstr "" +msgstr "suǒ yǒu zhèng zài shǐ yòng zhōng de PCNT dān yuán" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c -- cgit v1.2.3 From ff411802374d4a77b0bc76da0e4fa31076c0182e Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Thu, 12 Nov 2020 16:30:30 +0530 Subject: pcnt reset on reload --- ports/esp32s2/peripherals/pcnt.c | 18 ++++++++++-------- ports/esp32s2/peripherals/pcnt.h | 1 + ports/esp32s2/supervisor/port.c | 5 +++++ 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/ports/esp32s2/peripherals/pcnt.c b/ports/esp32s2/peripherals/pcnt.c index 555a0ec1d..dd24569be 100644 --- a/ports/esp32s2/peripherals/pcnt.c +++ b/ports/esp32s2/peripherals/pcnt.c @@ -29,14 +29,20 @@ #define PCNT_UNIT_ACTIVE 1 #define PCNT_UNIT_INACTIVE 0 -static uint8_t pcnt_state[4]; +static uint8_t pcnt_unit_state[4]; + +void peripherals_pcnt_reset(void) { + for (uint8_t i = 0; i<=3; i++) { + pcnt_unit_state[i] = PCNT_UNIT_INACTIVE; + } +} int peripherals_pcnt_init(pcnt_config_t pcnt_config) { // Look for available pcnt unit for (uint8_t i = 0; i<=3; i++) { - if (pcnt_state[i] == PCNT_UNIT_INACTIVE) { + if (pcnt_unit_state[i] == PCNT_UNIT_INACTIVE) { pcnt_config.unit = (pcnt_unit_t)i; - pcnt_state[i] = PCNT_UNIT_ACTIVE; + pcnt_unit_state[i] = PCNT_UNIT_ACTIVE; break; } else if (i == 3) { return -1; @@ -46,10 +52,6 @@ int peripherals_pcnt_init(pcnt_config_t pcnt_config) { // Initialize PCNT unit pcnt_unit_config(&pcnt_config); - // Configure and enable the input filter - pcnt_set_filter_value(pcnt_config.unit, 100); - pcnt_filter_enable(pcnt_config.unit); - // Initialize PCNT's counter pcnt_counter_pause(pcnt_config.unit); pcnt_counter_clear(pcnt_config.unit); @@ -61,6 +63,6 @@ int peripherals_pcnt_init(pcnt_config_t pcnt_config) { } void peripherals_pcnt_deinit(pcnt_unit_t* unit) { - pcnt_state[*unit] = PCNT_UNIT_INACTIVE; + pcnt_unit_state[*unit] = PCNT_UNIT_INACTIVE; *unit = PCNT_UNIT_MAX; } diff --git a/ports/esp32s2/peripherals/pcnt.h b/ports/esp32s2/peripherals/pcnt.h index abed80fd0..4fce13f4d 100644 --- a/ports/esp32s2/peripherals/pcnt.h +++ b/ports/esp32s2/peripherals/pcnt.h @@ -31,5 +31,6 @@ extern int peripherals_pcnt_init(pcnt_config_t pcnt_config); extern void peripherals_pcnt_deinit(pcnt_unit_t* unit); +extern void peripherals_pcnt_reset(void); #endif // MICROPY_INCLUDED_ESP32S2_PERIPHERALS_PCNT_HANDLER_H diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 3ea1fafbb..ef032c4a7 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -49,6 +49,7 @@ #include "shared-bindings/rtc/__init__.h" #include "peripherals/rmt.h" +#include "peripherals/pcnt.h" #include "components/heap/include/esp_heap_caps.h" #include "components/soc/soc/esp32s2/include/soc/cache_memory.h" @@ -117,6 +118,10 @@ void reset_port(void) { uart_reset(); #endif +#if defined(CIRCUITPY_COUNTIO) || defined(CIRCUITPY_ROTARYIO) + peripherals_pcnt_reset(); +#endif + #if CIRCUITPY_RTC rtc_reset(); #endif -- cgit v1.2.3 From 9774736a50577fe9ae1426d95fc3bea5751411fc Mon Sep 17 00:00:00 2001 From: Enrique Casado Date: Thu, 12 Nov 2020 12:30:34 +0100 Subject: Rename pins to make them the same as the Arduino core --- .../atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk | 3 ++- ports/atmel-samd/boards/dynossat_edu_eps/pins.c | 17 ++++++++++++----- ports/atmel-samd/boards/dynossat_edu_obc/pins.c | 4 ++++ 3 files changed, 18 insertions(+), 6 deletions(-) diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk index 3c0cc07be..61fafe8e9 100644 --- a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk +++ b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk @@ -15,8 +15,9 @@ LONGINT_IMPL = MPZ CIRCUITPY_BITBANGIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_COUNTIO = 0 -CIRCUITPY_I2CPERIPHERAL = 0 +CIRCUITPY_I2CPERIPHERAL = 1 CIRCUITPY_VECTORIO = 0 +CIRCUITPY_TOUCHIO = 0 CFLAGS_INLINE_LIMIT = 60 diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/pins.c b/ports/atmel-samd/boards/dynossat_edu_eps/pins.c index a910311d4..f960e6bb0 100644 --- a/ports/atmel-samd/boards/dynossat_edu_eps/pins.c +++ b/ports/atmel-samd/boards/dynossat_edu_eps/pins.c @@ -4,17 +4,17 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PB11) }, { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA12) }, { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB10) }, - { MP_ROM_QSTR(MP_QSTR_D30), MP_ROM_PTR(&pin_PA30) }, - { MP_ROM_QSTR(MP_QSTR_D31), MP_ROM_PTR(&pin_PA31) }, + { MP_ROM_QSTR(MP_QSTR_D26), MP_ROM_PTR(&pin_PA30) }, + { MP_ROM_QSTR(MP_QSTR_D27), MP_ROM_PTR(&pin_PA31) }, { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA17) }, { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA07) }, { MP_ROM_QSTR(MP_QSTR_OVTEMP), MP_ROM_PTR(&pin_PA07) }, { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA16) }, { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) }, { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) }, - { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA11) }, { MP_ROM_QSTR(MP_QSTR_SAT_RESET), MP_ROM_PTR(&pin_PA11) }, - { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA10) }, { MP_ROM_QSTR(MP_QSTR_SAT_PWR_ENABLE), MP_ROM_PTR(&pin_PA10) }, { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA19) }, { MP_ROM_QSTR(MP_QSTR_INT_IMU_OBC), MP_ROM_PTR(&pin_PA19) }, @@ -22,10 +22,17 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_PWRMON_SDA), MP_ROM_PTR(&pin_PA04) }, { MP_ROM_QSTR(MP_QSTR_PWRMON_SCL), MP_ROM_PTR(&pin_PA05) }, { MP_ROM_QSTR(MP_QSTR_PWRMON_ALERT), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_V_3V3_MEAS), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_V_5V_MEAS), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_FLASH_SCK), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_FLASH_MOSI), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_FLASH_MISO), MP_ROM_PTR(&pin_PA21) }, + { MP_ROM_QSTR(MP_QSTR_FLASH_CS), MP_ROM_PTR(&pin_PA20) }, { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA06) }, { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA06) }, { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, - { MP_ROM_QSTR(MP_QSTR_I2C_MONITOR), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, }; diff --git a/ports/atmel-samd/boards/dynossat_edu_obc/pins.c b/ports/atmel-samd/boards/dynossat_edu_obc/pins.c index a560360f7..8cc58d92c 100644 --- a/ports/atmel-samd/boards/dynossat_edu_obc/pins.c +++ b/ports/atmel-samd/boards/dynossat_edu_obc/pins.c @@ -26,12 +26,16 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB07) }, { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PB06) }, { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PB30) }, + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PB00) }, { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA08) }, { MP_ROM_QSTR(MP_QSTR_D32), MP_ROM_PTR(&pin_PA30) }, { MP_ROM_QSTR(MP_QSTR_D33), MP_ROM_PTR(&pin_PA31) }, { MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_PB22) }, { MP_ROM_QSTR(MP_QSTR_INT_IMU), MP_ROM_PTR(&pin_PA12) }, { MP_ROM_QSTR(MP_QSTR_SAT_POWER), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_OVTEMP), MP_ROM_PTR(&pin_PB00) }, { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA08) }, { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, -- cgit v1.2.3 From aa68b172232f6c817d0f2d3888abd38ada966a36 Mon Sep 17 00:00:00 2001 From: Enrique Casado Date: Thu, 12 Nov 2020 13:26:26 +0100 Subject: Freed some more space --- ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk | 3 +++ 1 file changed, 3 insertions(+) diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk index 61fafe8e9..6d2c1379d 100644 --- a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk +++ b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk @@ -12,12 +12,15 @@ EXTERNAL_FLASH_DEVICE_COUNT = 1 EXTERNAL_FLASH_DEVICES = "GD25Q32C" LONGINT_IMPL = MPZ +CIRCUITPY_FULLBUILD = 0 CIRCUITPY_BITBANGIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_COUNTIO = 0 CIRCUITPY_I2CPERIPHERAL = 1 CIRCUITPY_VECTORIO = 0 +CIRCUITPY_DISPLAYIO = 0 CIRCUITPY_TOUCHIO = 0 +CIRCUITPY_ROTARYIO = 0 CFLAGS_INLINE_LIMIT = 60 -- cgit v1.2.3 From f4b10879fbe6e8efb6ba62219f93fff84c383c1b Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Thu, 12 Nov 2020 11:48:01 -0800 Subject: Change creation date back. --- locale/circuitpython.pot | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 931ae6a42..60d05888f 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-11 14:06-0500\n" +"POT-Creation-Date: 2020-11-04 21:18+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" -- cgit v1.2.3 From 2f2fe10e12ba61e3a7f5b1548d89c7d294ce2d22 Mon Sep 17 00:00:00 2001 From: sporeball Date: Wed, 11 Nov 2020 23:14:48 +0000 Subject: Translated using Weblate (Japanese) Currently translated at 71.8% (607 of 845 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ja/ --- locale/ja.po | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/locale/ja.po b/locale/ja.po index 7004c49f3..443209555 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-06 20:29+0000\n" +"PO-Revision-Date: 2020-11-12 22:51+0000\n" "Last-Translator: sporeball \n" "Language-Team: none\n" "Language: ja\n" @@ -16,7 +16,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Weblate 4.3.2\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -2786,7 +2786,7 @@ msgstr "" #: shared-bindings/wifi/Radio.c msgid "invalid hostname" -msgstr "" +msgstr "不正なホスト名" #: extmod/modussl_axtls.c msgid "invalid key" -- cgit v1.2.3 From 1145fcaf3efa0ac073ae29e902a8dd5d48a1530d Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Thu, 12 Nov 2020 23:52:01 +0100 Subject: Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 5 +++++ locale/cs.po | 5 +++++ locale/de_DE.po | 5 +++++ locale/el.po | 5 +++++ locale/es.po | 5 +++++ locale/fil.po | 5 +++++ locale/fr.po | 5 +++++ locale/hi.po | 5 +++++ locale/it_IT.po | 5 +++++ locale/ja.po | 5 +++++ locale/ko.po | 5 +++++ locale/nl.po | 5 +++++ locale/pl.po | 5 +++++ locale/pt_BR.po | 5 +++++ locale/sv.po | 5 +++++ locale/zh_Latn_pinyin.po | 5 +++++ 16 files changed, 80 insertions(+) diff --git a/locale/ID.po b/locale/ID.po index 3e47dc9a1..90e416b3b 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -435,6 +435,11 @@ msgstr "Di bawah frame rate minimum" msgid "Bit clock and word select must share a clock unit" msgstr "Bit clock dan word harus memiliki kesamaan pada clock unit" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Kedalaman bit harus kelipatan 8." diff --git a/locale/cs.po b/locale/cs.po index 428d6d1fe..f02d31e4d 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -433,6 +433,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 059d726ca..c2cb26550 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -436,6 +436,11 @@ msgstr "Unterhalb der minimalen Frame Rate" msgid "Bit clock and word select must share a clock unit" msgstr "Bit clock und word select müssen eine clock unit teilen" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bit depth muss ein Vielfaches von 8 sein." diff --git a/locale/el.po b/locale/el.po index 327f4dbe0..4d7bff193 100644 --- a/locale/el.po +++ b/locale/el.po @@ -428,6 +428,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "" diff --git a/locale/es.po b/locale/es.po index 95d6a92ff..ed7431eb7 100644 --- a/locale/es.po +++ b/locale/es.po @@ -442,6 +442,11 @@ msgstr "Por debajo de taza mínima de refrescamiento" msgid "Bit clock and word select must share a clock unit" msgstr "Bit clock y word select deben compartir una unidad de reloj" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bits depth debe ser múltiplo de 8." diff --git a/locale/fil.po b/locale/fil.po index ce3b5616a..93f41a88e 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -433,6 +433,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "Ang bit clock at word select dapat makibahagi sa isang clock unit" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bit depth ay dapat multiple ng 8." diff --git a/locale/fr.po b/locale/fr.po index 94ca1f21c..ff15b527e 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -442,6 +442,11 @@ msgstr "Inférieur à la fréquence d'images minimale" msgid "Bit clock and word select must share a clock unit" msgstr "'bit clock' et 'word select' doivent partager une horloge" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "La profondeur de bit doit être un multiple de 8." diff --git a/locale/hi.po b/locale/hi.po index d87a1eb9c..aea2b3f0c 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -428,6 +428,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index 657c581ce..603cf9fd0 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -433,6 +433,11 @@ msgid "Bit clock and word select must share a clock unit" msgstr "" "Clock di bit e selezione parola devono condividere la stessa unità di clock" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "La profondità di bit deve essere multipla di 8." diff --git a/locale/ja.po b/locale/ja.po index 443209555..80486dc21 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -437,6 +437,11 @@ msgstr "最低のフレームレート未満" msgid "Bit clock and word select must share a clock unit" msgstr "bit clockとword selectはクロックユニットを共有しなければなりません" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "ビット深度は8の倍数でなければなりません" diff --git a/locale/ko.po b/locale/ko.po index 4b302f3b9..c9215fb85 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -433,6 +433,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "" diff --git a/locale/nl.po b/locale/nl.po index 6851e6ef3..cfe2193bb 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -435,6 +435,11 @@ msgstr "Onder de minimum frame rate" msgid "Bit clock and word select must share a clock unit" msgstr "Bit clock en word select moeten een clock eenheid delen" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bit diepte moet een meervoud van 8 zijn." diff --git a/locale/pl.po b/locale/pl.po index 1b0b41fdf..623acd4c5 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -437,6 +437,11 @@ msgstr "" msgid "Bit clock and word select must share a clock unit" msgstr "Zegar bitowy i wybór słowa muszą współdzielić jednostkę zegara" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Głębia musi być wielokrotnością 8." diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 99f090dbd..67b3dc8a7 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -443,6 +443,11 @@ msgstr "" "O clock de bits e a seleção de palavras devem compartilhar uma unidade de " "clock" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "A profundidade de bits deve ser o múltiplo de 8." diff --git a/locale/sv.po b/locale/sv.po index d9639aff6..be7eb0894 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -435,6 +435,11 @@ msgstr "Under minsta bildfrekvens" msgid "Bit clock and word select must share a clock unit" msgstr "Bitklocka och ordval måste dela en klockenhet" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bitdjup måste vara multipel av 8." diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 4d45f65bd..4ac1c3e1e 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -437,6 +437,11 @@ msgstr "Dī yú zuìdī zhèng sùlǜ" msgid "Bit clock and word select must share a clock unit" msgstr "Bǐtè shízhōng hé dānzì xuǎnzé bìxū gòngxiǎng shízhōng dānwèi" +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Bit depth must be from 1 to 6 inclusive, not %d" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bǐtè shēndù bìxū shì 8 bèi yǐshàng." -- cgit v1.2.3 From 0f7081781e8a45da513b371978a354ea8734cc31 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 12 Nov 2020 20:40:09 -0600 Subject: esp32s2: wifi: fix several debug-build errors Closes #3688 With this change, I don't get the ESP_ERROR_CHECK failed repeatedly running code that imports wifi. (I'm not getting a successful connection but that's probably my own fault, such as a secrets problem) --- ports/esp32s2/common-hal/wifi/__init__.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/esp32s2/common-hal/wifi/__init__.c b/ports/esp32s2/common-hal/wifi/__init__.c index 833ef0623..2eb3719b4 100644 --- a/ports/esp32s2/common-hal/wifi/__init__.c +++ b/ports/esp32s2/common-hal/wifi/__init__.c @@ -143,8 +143,8 @@ void wifi_reset(void) { radio->handler_instance_got_ip)); ESP_ERROR_CHECK(esp_wifi_deinit()); esp_netif_destroy(radio->netif); + ESP_ERROR_CHECK(esp_event_loop_delete_default()); radio->netif = NULL; - ESP_ERROR_CHECK(esp_netif_deinit()); } void ipaddress_ipaddress_to_esp_idf(mp_obj_t ip_address, ip_addr_t* esp_ip_address) { -- cgit v1.2.3 From 8d4296f96430795936a22769da35732e5342b25c Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Tue, 10 Nov 2020 18:02:16 -0800 Subject: Add board.DISPLAY to MagTag. Fix luma computation * Initialize the EPaper display on the MagTag at start. * Tweak the display send to take a const buffer. * Correct Luma math * Multiply the blue component, not add. * Add all of the components together before dividing. This reduces the impact of truncated division. --- .../boards/adafruit_magtag_2.9_grayscale/board.c | 122 +++++++++++++++++++++ .../boards/adafruit_magtag_2.9_grayscale/pins.c | 4 + ports/esp32s2/common-hal/displayio/ParallelBus.c | 3 +- shared-bindings/displayio/EPaperDisplay.h | 2 +- shared-bindings/displayio/FourWire.h | 3 +- shared-bindings/displayio/I2CDisplay.h | 3 +- shared-bindings/displayio/ParallelBus.h | 3 +- shared-bindings/displayio/__init__.h | 3 +- shared-module/displayio/ColorConverter.c | 2 +- shared-module/displayio/EPaperDisplay.c | 14 ++- shared-module/displayio/EPaperDisplay.h | 4 +- shared-module/displayio/FourWire.c | 3 +- shared-module/displayio/I2CDisplay.c | 3 +- 13 files changed, 152 insertions(+), 17 deletions(-) diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c index 9f708874b..ecd44e423 100644 --- a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c @@ -26,7 +26,83 @@ #include "boards/board.h" #include "mpconfigboard.h" +#include "shared-bindings/busio/SPI.h" +#include "shared-bindings/displayio/FourWire.h" #include "shared-bindings/microcontroller/Pin.h" +#include "shared-module/displayio/__init__.h" +#include "supervisor/shared/board.h" + +#define DELAY 0x80 + +// This is an ILO373 control chip. The display is a 2.9" grayscale EInk. + +const uint8_t display_start_sequence[] = { + 0x01, 5, 0x03, 0x00, 0x2b, 0x2b, 0x13, // power setting + 0x06, 3, 0x17, 0x17, 0x17, // booster soft start + 0x04, DELAY, 200, // power on and wait 200 ms + 0x00, 1, 0x7f, // panel setting + 0x50, 1, 0x97, // CDI setting + 0x30, 1, 0x3c, // PLL set to 50 Hx (M = 7, N = 4) + 0x61, 3, 0x80, 0x01, 0x28, // Resolution + 0x82, DELAY | 1, 0x12, 50, // VCM DC and delay 50ms + + // Look up tables for voltage sequence for pixel transition + // Common voltage + 0x20, 0x2a, + 0x00, 0x0a, 0x00, 0x00, 0x00, 0x01, + 0x60, 0x14, 0x14, 0x00, 0x00, 0x01, + 0x00, 0x14, 0x00, 0x00, 0x00, 0x01, + 0x00, 0x13, 0x0a, 0x01, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + // White to white + 0x21, 0x2a, + 0x40, 0x0a, 0x00, 0x00, 0x00, 0x01, + 0x90, 0x14, 0x14, 0x00, 0x00, 0x01, + 0x10, 0x14, 0x0a, 0x00, 0x00, 0x01, + 0xa0, 0x13, 0x01, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + // Black to white + 0x22, 0x2a, + 0x40, 0x0a, 0x00, 0x00, 0x00, 0x01, + 0x90, 0x14, 0x14, 0x00, 0x00, 0x01, + 0x00, 0x14, 0x0a, 0x00, 0x00, 0x01, + 0x99, 0x0c, 0x01, 0x03, 0x04, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + // White to black + 0x23, 0x2a, + 0x40, 0x0a, 0x00, 0x00, 0x00, 0x01, + 0x90, 0x14, 0x14, 0x00, 0x00, 0x01, + 0x00, 0x14, 0x0a, 0x00, 0x00, 0x01, + 0x99, 0x0b, 0x04, 0x04, 0x01, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + // Black to black + 0x24, 0x2a, + 0x80, 0x0a, 0x00, 0x00, 0x00, 0x01, + 0x90, 0x14, 0x14, 0x00, 0x00, 0x01, + 0x20, 0x14, 0x0a, 0x00, 0x00, 0x01, + 0x50, 0x13, 0x01, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +const uint8_t display_stop_sequence[] = { + 0x50, 0x01, 0x17, // CDI Setting + 0x82, 0x01, 0x00, // VCM DC to -0.1V + 0x02, 0x00 // Power off +}; void board_init(void) { // USB @@ -36,6 +112,52 @@ void board_init(void) { // Debug UART common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); + + busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus; + common_hal_busio_spi_construct(spi, &pin_GPIO36, &pin_GPIO35, NULL); + common_hal_busio_spi_never_reset(spi); + + displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus; + bus->base.type = &displayio_fourwire_type; + common_hal_displayio_fourwire_construct(bus, + spi, + &pin_GPIO7, // EPD_DC Command or data + &pin_GPIO8, // EPD_CS Chip select + &pin_GPIO6, // EPD_RST Reset + 4000000, // Baudrate + 0, // Polarity + 0); // Phase + + displayio_epaperdisplay_obj_t* display = &displays[0].epaper_display; + display->base.type = &displayio_epaperdisplay_type; + common_hal_displayio_epaperdisplay_construct( + display, + bus, + display_start_sequence, sizeof(display_start_sequence), + display_stop_sequence, sizeof(display_stop_sequence), + 296, // width + 128, // height + 160, // ram_width + 296, // ram_height + 0, // colstart + 0, // rowstart + 270, // rotation + NO_COMMAND, // set_column_window_command + NO_COMMAND, // set_row_window_command + NO_COMMAND, // set_current_column_command + NO_COMMAND, // set_current_row_command + 0x10, // write_black_ram_command + false, // black_bits_inverted + 0x13, // write_color_ram_command + false, // color_bits_inverted + 0x000000, // highlight_color + 0x12, // refresh_display_command + 1.0, // refresh_time + &pin_GPIO5, // busy_pin + false, // busy_state + 5.0, // seconds_per_frame + false, // always_toggle_chip_select + true); // grayscale } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c index 65bc3fb53..40c9e91e4 100644 --- a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c @@ -1,5 +1,7 @@ #include "shared-bindings/board/__init__.h" +#include "shared-module/displayio/__init__.h" + STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) }, { MP_ROM_QSTR(MP_QSTR_AD1), MP_ROM_PTR(&pin_GPIO18) }, @@ -37,5 +39,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + + { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].epaper_display)} }; MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/common-hal/displayio/ParallelBus.c b/ports/esp32s2/common-hal/displayio/ParallelBus.c index 314b72ff7..d0c98f361 100644 --- a/ports/esp32s2/common-hal/displayio/ParallelBus.c +++ b/ports/esp32s2/common-hal/displayio/ParallelBus.c @@ -57,7 +57,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { return false; } -void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { } diff --git a/shared-bindings/displayio/EPaperDisplay.h b/shared-bindings/displayio/EPaperDisplay.h index 352de899a..9a2d93bac 100644 --- a/shared-bindings/displayio/EPaperDisplay.h +++ b/shared-bindings/displayio/EPaperDisplay.h @@ -39,7 +39,7 @@ extern const mp_obj_type_t displayio_epaperdisplay_type; #define NO_COMMAND 0x100 void common_hal_displayio_epaperdisplay_construct(displayio_epaperdisplay_obj_t* self, - mp_obj_t bus, uint8_t* start_sequence, uint16_t start_sequence_len, uint8_t* stop_sequence, uint16_t stop_sequence_len, + mp_obj_t bus, const uint8_t* start_sequence, uint16_t start_sequence_len, const uint8_t* stop_sequence, uint16_t stop_sequence_len, uint16_t width, uint16_t height, uint16_t ram_width, uint16_t ram_height, int16_t colstart, int16_t rowstart, uint16_t rotation, uint16_t set_column_window_command, uint16_t set_row_window_command, uint16_t set_current_column_command, uint16_t set_current_row_command, diff --git a/shared-bindings/displayio/FourWire.h b/shared-bindings/displayio/FourWire.h index ac186d2c3..6f6b528e7 100644 --- a/shared-bindings/displayio/FourWire.h +++ b/shared-bindings/displayio/FourWire.h @@ -48,7 +48,8 @@ bool common_hal_displayio_fourwire_bus_free(mp_obj_t self); bool common_hal_displayio_fourwire_begin_transaction(mp_obj_t self); -void common_hal_displayio_fourwire_send(mp_obj_t self, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length); +void common_hal_displayio_fourwire_send(mp_obj_t self, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length); void common_hal_displayio_fourwire_end_transaction(mp_obj_t self); diff --git a/shared-bindings/displayio/I2CDisplay.h b/shared-bindings/displayio/I2CDisplay.h index bae53c491..37520202e 100644 --- a/shared-bindings/displayio/I2CDisplay.h +++ b/shared-bindings/displayio/I2CDisplay.h @@ -44,7 +44,8 @@ bool common_hal_displayio_i2cdisplay_bus_free(mp_obj_t self); bool common_hal_displayio_i2cdisplay_begin_transaction(mp_obj_t self); -void common_hal_displayio_i2cdisplay_send(mp_obj_t self, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length); +void common_hal_displayio_i2cdisplay_send(mp_obj_t self, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length); void common_hal_displayio_i2cdisplay_end_transaction(mp_obj_t self); diff --git a/shared-bindings/displayio/ParallelBus.h b/shared-bindings/displayio/ParallelBus.h index be2aef7d4..1e74e3a0a 100644 --- a/shared-bindings/displayio/ParallelBus.h +++ b/shared-bindings/displayio/ParallelBus.h @@ -46,7 +46,8 @@ bool common_hal_displayio_parallelbus_bus_free(mp_obj_t self); bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t self); -void common_hal_displayio_parallelbus_send(mp_obj_t self, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length); +void common_hal_displayio_parallelbus_send(mp_obj_t self, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length); void common_hal_displayio_parallelbus_end_transaction(mp_obj_t self); diff --git a/shared-bindings/displayio/__init__.h b/shared-bindings/displayio/__init__.h index a7748d029..4fc666c59 100644 --- a/shared-bindings/displayio/__init__.h +++ b/shared-bindings/displayio/__init__.h @@ -42,7 +42,8 @@ typedef enum { typedef bool (*display_bus_bus_reset)(mp_obj_t bus); typedef bool (*display_bus_bus_free)(mp_obj_t bus); typedef bool (*display_bus_begin_transaction)(mp_obj_t bus); -typedef void (*display_bus_send)(mp_obj_t bus, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length); +typedef void (*display_bus_send)(mp_obj_t bus, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length); typedef void (*display_bus_end_transaction)(mp_obj_t bus); void common_hal_displayio_release_displays(void); diff --git a/shared-module/displayio/ColorConverter.c b/shared-module/displayio/ColorConverter.c index 03ec99ceb..80558d037 100644 --- a/shared-module/displayio/ColorConverter.c +++ b/shared-module/displayio/ColorConverter.c @@ -55,7 +55,7 @@ uint8_t displayio_colorconverter_compute_luma(uint32_t color_rgb888) { uint32_t r8 = (color_rgb888 >> 16); uint32_t g8 = (color_rgb888 >> 8) & 0xff; uint32_t b8 = color_rgb888 & 0xff; - return (r8 * 19) / 255 + (g8 * 182) / 255 + (b8 + 54) / 255; + return (r8 * 19 + g8 * 182 + b8 * 54) / 255; } uint8_t displayio_colorconverter_compute_chroma(uint32_t color_rgb888) { diff --git a/shared-module/displayio/EPaperDisplay.c b/shared-module/displayio/EPaperDisplay.c index 514b99a13..acca92ac1 100644 --- a/shared-module/displayio/EPaperDisplay.c +++ b/shared-module/displayio/EPaperDisplay.c @@ -43,7 +43,8 @@ #include void common_hal_displayio_epaperdisplay_construct(displayio_epaperdisplay_obj_t* self, - mp_obj_t bus, uint8_t* start_sequence, uint16_t start_sequence_len, uint8_t* stop_sequence, uint16_t stop_sequence_len, + mp_obj_t bus, const uint8_t* start_sequence, uint16_t start_sequence_len, + const uint8_t* stop_sequence, uint16_t stop_sequence_len, uint16_t width, uint16_t height, uint16_t ram_width, uint16_t ram_height, int16_t colstart, int16_t rowstart, uint16_t rotation, uint16_t set_column_window_command, uint16_t set_row_window_command, @@ -133,14 +134,15 @@ STATIC void wait_for_busy(displayio_epaperdisplay_obj_t* self) { } } -STATIC void send_command_sequence(displayio_epaperdisplay_obj_t* self, bool should_wait_for_busy, uint8_t* sequence, uint32_t sequence_len) { +STATIC void send_command_sequence(displayio_epaperdisplay_obj_t* self, + bool should_wait_for_busy, const uint8_t* sequence, uint32_t sequence_len) { uint32_t i = 0; while (i < sequence_len) { - uint8_t *cmd = sequence + i; + const uint8_t *cmd = sequence + i; uint8_t data_size = *(cmd + 1); bool delay = (data_size & DELAY) != 0; data_size &= ~DELAY; - uint8_t *data = cmd + 2; + const uint8_t *data = cmd + 2; displayio_display_core_begin_transaction(&self->core); self->core.send(self->core.bus, DISPLAY_COMMAND, self->chip_select, cmd, 1); self->core.send(self->core.bus, DISPLAY_DATA, self->chip_select, data, data_size); @@ -375,8 +377,8 @@ void release_epaperdisplay(displayio_epaperdisplay_obj_t* self) { void displayio_epaperdisplay_collect_ptrs(displayio_epaperdisplay_obj_t* self) { displayio_display_core_collect_ptrs(&self->core); - gc_collect_ptr(self->start_sequence); - gc_collect_ptr(self->stop_sequence); + gc_collect_ptr((void *) self->start_sequence); + gc_collect_ptr((void *) self->stop_sequence); } bool maybe_refresh_epaperdisplay(void) { diff --git a/shared-module/displayio/EPaperDisplay.h b/shared-module/displayio/EPaperDisplay.h index 4103fe5fc..d0668ff44 100644 --- a/shared-module/displayio/EPaperDisplay.h +++ b/shared-module/displayio/EPaperDisplay.h @@ -38,9 +38,9 @@ typedef struct { displayio_display_core_t core; digitalio_digitalinout_obj_t busy; uint32_t milliseconds_per_frame; - uint8_t* start_sequence; + const uint8_t* start_sequence; uint32_t start_sequence_len; - uint8_t* stop_sequence; + const uint8_t* stop_sequence; uint32_t stop_sequence_len; uint16_t refresh_time; uint16_t set_column_window_command; diff --git a/shared-module/displayio/FourWire.c b/shared-module/displayio/FourWire.c index 8c56d7ab6..06f8a84e3 100644 --- a/shared-module/displayio/FourWire.c +++ b/shared-module/displayio/FourWire.c @@ -113,7 +113,8 @@ bool common_hal_displayio_fourwire_begin_transaction(mp_obj_t obj) { return true; } -void common_hal_displayio_fourwire_send(mp_obj_t obj, display_byte_type_t data_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_fourwire_send(mp_obj_t obj, display_byte_type_t data_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { displayio_fourwire_obj_t* self = MP_OBJ_TO_PTR(obj); common_hal_digitalio_digitalinout_set_value(&self->command, data_type == DISPLAY_DATA); if (chip_select == CHIP_SELECT_TOGGLE_EVERY_BYTE) { diff --git a/shared-module/displayio/I2CDisplay.c b/shared-module/displayio/I2CDisplay.c index 5bd03dcd6..cc811e83d 100644 --- a/shared-module/displayio/I2CDisplay.c +++ b/shared-module/displayio/I2CDisplay.c @@ -103,7 +103,8 @@ bool common_hal_displayio_i2cdisplay_begin_transaction(mp_obj_t obj) { return common_hal_busio_i2c_try_lock(self->bus); } -void common_hal_displayio_i2cdisplay_send(mp_obj_t obj, display_byte_type_t data_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_i2cdisplay_send(mp_obj_t obj, display_byte_type_t data_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { displayio_i2cdisplay_obj_t* self = MP_OBJ_TO_PTR(obj); if (data_type == DISPLAY_COMMAND) { uint8_t command_bytes[2 * data_length]; -- cgit v1.2.3 From 78ccac930fbcb3dddd3a1a79809a2ec371d34c6a Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Wed, 11 Nov 2020 16:53:45 -0800 Subject: Add .busy property to EPaperDisplay --- shared-bindings/displayio/EPaperDisplay.c | 18 ++++++++++++++++++ shared-bindings/displayio/EPaperDisplay.h | 1 + shared-module/displayio/EPaperDisplay.c | 5 +++++ 3 files changed, 24 insertions(+) diff --git a/shared-bindings/displayio/EPaperDisplay.c b/shared-bindings/displayio/EPaperDisplay.c index 8518e3714..ebff64008 100644 --- a/shared-bindings/displayio/EPaperDisplay.c +++ b/shared-bindings/displayio/EPaperDisplay.c @@ -245,6 +245,23 @@ const mp_obj_property_t displayio_epaperdisplay_time_to_refresh_obj = { (mp_obj_t)&mp_const_none_obj}, }; +//| busy: bool +//| """True when the display is refreshing. This uses the ``busy_pin`` when available or the +//| ``refresh_time`` otherwise.""" +//| +STATIC mp_obj_t displayio_epaperdisplay_obj_get_busy(mp_obj_t self_in) { + displayio_epaperdisplay_obj_t *self = native_display(self_in); + return mp_obj_new_bool(common_hal_displayio_epaperdisplay_get_busy(self)); +} +MP_DEFINE_CONST_FUN_OBJ_1(displayio_epaperdisplay_get_busy_obj, displayio_epaperdisplay_obj_get_busy); + +const mp_obj_property_t displayio_epaperdisplay_busy_obj = { + .base.type = &mp_type_property, + .proxy = {(mp_obj_t)&displayio_epaperdisplay_get_busy_obj, + (mp_obj_t)&mp_const_none_obj, + (mp_obj_t)&mp_const_none_obj}, +}; + //| width: int //| """Gets the width of the display in pixels""" //| @@ -301,6 +318,7 @@ STATIC const mp_rom_map_elem_t displayio_epaperdisplay_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_width), MP_ROM_PTR(&displayio_epaperdisplay_width_obj) }, { MP_ROM_QSTR(MP_QSTR_height), MP_ROM_PTR(&displayio_epaperdisplay_height_obj) }, { MP_ROM_QSTR(MP_QSTR_bus), MP_ROM_PTR(&displayio_epaperdisplay_bus_obj) }, + { MP_ROM_QSTR(MP_QSTR_busy), MP_ROM_PTR(&displayio_epaperdisplay_busy_obj) }, { MP_ROM_QSTR(MP_QSTR_time_to_refresh), MP_ROM_PTR(&displayio_epaperdisplay_time_to_refresh_obj) }, }; STATIC MP_DEFINE_CONST_DICT(displayio_epaperdisplay_locals_dict, displayio_epaperdisplay_locals_dict_table); diff --git a/shared-bindings/displayio/EPaperDisplay.h b/shared-bindings/displayio/EPaperDisplay.h index 9a2d93bac..f785203a4 100644 --- a/shared-bindings/displayio/EPaperDisplay.h +++ b/shared-bindings/displayio/EPaperDisplay.h @@ -52,6 +52,7 @@ bool common_hal_displayio_epaperdisplay_show(displayio_epaperdisplay_obj_t* self // Returns time in milliseconds. uint32_t common_hal_displayio_epaperdisplay_get_time_to_refresh(displayio_epaperdisplay_obj_t* self); +bool common_hal_displayio_epaperdisplay_get_busy(displayio_epaperdisplay_obj_t* self); uint16_t common_hal_displayio_epaperdisplay_get_width(displayio_epaperdisplay_obj_t* self); uint16_t common_hal_displayio_epaperdisplay_get_height(displayio_epaperdisplay_obj_t* self); diff --git a/shared-module/displayio/EPaperDisplay.c b/shared-module/displayio/EPaperDisplay.c index acca92ac1..1b285b4b1 100644 --- a/shared-module/displayio/EPaperDisplay.c +++ b/shared-module/displayio/EPaperDisplay.c @@ -360,6 +360,11 @@ void displayio_epaperdisplay_background(displayio_epaperdisplay_obj_t* self) { } } +bool common_hal_displayio_epaperdisplay_get_busy(displayio_epaperdisplay_obj_t* self) { + displayio_epaperdisplay_background(self); + return self->refreshing; +} + void release_epaperdisplay(displayio_epaperdisplay_obj_t* self) { if (self->refreshing) { wait_for_busy(self); -- cgit v1.2.3 From 68eb809fbf5cafdabb20c090b98aefb1628e3552 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Thu, 12 Nov 2020 12:39:31 -0800 Subject: Update parallel bus signatures --- ports/atmel-samd/common-hal/displayio/ParallelBus.c | 3 ++- ports/mimxrt10xx/common-hal/displayio/ParallelBus.c | 3 ++- ports/nrf/common-hal/displayio/ParallelBus.c | 3 ++- ports/stm/common-hal/displayio/ParallelBus.c | 3 ++- 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/ports/atmel-samd/common-hal/displayio/ParallelBus.c b/ports/atmel-samd/common-hal/displayio/ParallelBus.c index 405c08c64..f10dd2993 100644 --- a/ports/atmel-samd/common-hal/displayio/ParallelBus.c +++ b/ports/atmel-samd/common-hal/displayio/ParallelBus.c @@ -129,7 +129,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { return true; } -void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { displayio_parallelbus_obj_t* self = MP_OBJ_TO_PTR(obj); common_hal_digitalio_digitalinout_set_value(&self->command, byte_type == DISPLAY_DATA); uint32_t* clear_write = (uint32_t*) &self->write_group->OUTCLR.reg; diff --git a/ports/mimxrt10xx/common-hal/displayio/ParallelBus.c b/ports/mimxrt10xx/common-hal/displayio/ParallelBus.c index 87a72d0f3..0fdf4413b 100644 --- a/ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +++ b/ports/mimxrt10xx/common-hal/displayio/ParallelBus.c @@ -57,7 +57,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { return false; } -void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { } diff --git a/ports/nrf/common-hal/displayio/ParallelBus.c b/ports/nrf/common-hal/displayio/ParallelBus.c index f13e03163..31ee1f48e 100644 --- a/ports/nrf/common-hal/displayio/ParallelBus.c +++ b/ports/nrf/common-hal/displayio/ParallelBus.c @@ -141,7 +141,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { } // This ignores chip_select behaviour because data is clocked in by the write line toggling. -void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { displayio_parallelbus_obj_t* self = MP_OBJ_TO_PTR(obj); common_hal_digitalio_digitalinout_set_value(&self->command, byte_type == DISPLAY_DATA); uint32_t* clear_write = (uint32_t*) &self->write_group->OUTCLR; diff --git a/ports/stm/common-hal/displayio/ParallelBus.c b/ports/stm/common-hal/displayio/ParallelBus.c index 314b72ff7..fd07d38af 100644 --- a/ports/stm/common-hal/displayio/ParallelBus.c +++ b/ports/stm/common-hal/displayio/ParallelBus.c @@ -57,7 +57,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { return false; } -void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) { +void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { } -- cgit v1.2.3 From bda3267432aee57e704a20308b724369cceeb6ca Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Fri, 13 Nov 2020 18:33:02 -0800 Subject: Save flash space * No weak link for modules. It only impacts _os and _time and is already disabled for non-full builds. * Turn off PA00 and PA01 because they are the crystal on the Metro M0 Express. * Change ejected default to false to move it to BSS. It is set on USB connection anyway. * Set sinc_filter to const. Doesn't help flash but keeps it out of RAM. --- ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h | 4 ++++ ports/atmel-samd/common-hal/audiobusio/PDMIn.c | 2 +- py/circuitpy_mpconfig.h | 2 +- supervisor/shared/usb/usb_msc_flash.c | 2 +- 4 files changed, 7 insertions(+), 3 deletions(-) diff --git a/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h b/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h index 04565feb4..d48c596ac 100644 --- a/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h +++ b/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h @@ -33,6 +33,10 @@ #define DEFAULT_UART_BUS_RX (&pin_PA11) #define DEFAULT_UART_BUS_TX (&pin_PA10) +// These pins are connected to the external crystal. +#define IGNORE_PIN_PA00 1 +#define IGNORE_PIN_PA01 1 + // USB is always used internally so skip the pin objects for it. #define IGNORE_PIN_PA24 1 #define IGNORE_PIN_PA25 1 diff --git a/ports/atmel-samd/common-hal/audiobusio/PDMIn.c b/ports/atmel-samd/common-hal/audiobusio/PDMIn.c index 21474ab3b..3c9ec05c2 100644 --- a/ports/atmel-samd/common-hal/audiobusio/PDMIn.c +++ b/ports/atmel-samd/common-hal/audiobusio/PDMIn.c @@ -326,7 +326,7 @@ static void setup_dma(audiobusio_pdmin_obj_t* self, uint32_t length, // higher sample rate than specified. Then after the audio is // recorded, a more expensive filter non-real-time filter could be // used to down-sample and low-pass. -uint16_t sinc_filter [OVERSAMPLING] = { +const uint16_t sinc_filter [OVERSAMPLING] = { 0, 2, 9, 21, 39, 63, 94, 132, 179, 236, 302, 379, 467, 565, 674, 792, 920, 1055, 1196, 1341, 1487, 1633, 1776, 1913, diff --git a/py/circuitpy_mpconfig.h b/py/circuitpy_mpconfig.h index 08efabddb..85e152670 100644 --- a/py/circuitpy_mpconfig.h +++ b/py/circuitpy_mpconfig.h @@ -186,7 +186,7 @@ typedef long mp_off_t; #define MICROPY_CPYTHON_COMPAT (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_POW3 (CIRCUITPY_FULL_BUILD) #define MICROPY_COMP_FSTRING_LITERAL (MICROPY_CPYTHON_COMPAT) -#define MICROPY_MODULE_WEAK_LINKS (CIRCUITPY_FULL_BUILD) +#define MICROPY_MODULE_WEAK_LINKS (0) #define MICROPY_PY_ALL_SPECIAL_METHODS (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_COMPLEX (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_FROZENSET (CIRCUITPY_FULL_BUILD) diff --git a/supervisor/shared/usb/usb_msc_flash.c b/supervisor/shared/usb/usb_msc_flash.c index 7532b6aea..b39f60dcd 100644 --- a/supervisor/shared/usb/usb_msc_flash.c +++ b/supervisor/shared/usb/usb_msc_flash.c @@ -39,7 +39,7 @@ #define MSC_FLASH_BLOCK_SIZE 512 -static bool ejected[1] = {true}; +static bool ejected[1] = {false}; void usb_msc_mount(void) { // Reset the ejection tracking every time we're plugged into USB. This allows for us to battery -- cgit v1.2.3 From 146adca060d7abc76149c88c7cdd2d401f799efa Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Sat, 14 Nov 2020 11:41:14 +0530 Subject: Add watchdog mode raise --- ports/esp32s2/common-hal/watchdog/WatchDogTimer.c | 9 ++++++++- ports/esp32s2/common-hal/watchdog/WatchDogTimer.h | 3 +-- ports/esp32s2/supervisor/port.c | 5 +++++ 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c index 59b9dafcf..b51a391b7 100644 --- a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +++ b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.c @@ -27,12 +27,19 @@ #include "py/runtime.h" #include "common-hal/watchdog/WatchDogTimer.h" +#include "shared-bindings/watchdog/__init__.h" #include "shared-bindings/microcontroller/__init__.h" #include "esp_task_wdt.h" void esp_task_wdt_isr_user_handler(void) { - + mp_obj_exception_clear_traceback(MP_OBJ_FROM_PTR(&mp_watchdog_timeout_exception)); + MP_STATE_VM(mp_pending_exception) = &mp_watchdog_timeout_exception; +#if MICROPY_ENABLE_SCHEDULER + if (MP_STATE_VM(sched_state) == MP_SCHED_IDLE) { + MP_STATE_VM(sched_state) = MP_SCHED_PENDING; + } +#endif } void common_hal_watchdog_feed(watchdog_watchdogtimer_obj_t *self) { diff --git a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h index 05e0e954d..04d9aeee6 100644 --- a/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h +++ b/ports/esp32s2/common-hal/watchdog/WatchDogTimer.h @@ -37,8 +37,7 @@ struct _watchdog_watchdogtimer_obj_t { watchdog_watchdogmode_t mode; }; -// This needs to be called in order to disable the watchdog if it's set to -// "RAISE". If set to "RESET", then the watchdog cannot be reset. +// This needs to be called in order to disable the watchdog void watchdog_reset(void); #endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_WATCHDOG_WATCHDOGTIMER_H diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 0b9c03f74..1b6f5ef7c 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -41,6 +41,7 @@ #include "common-hal/busio/UART.h" #include "common-hal/pulseio/PulseIn.h" #include "common-hal/pwmio/PWMOut.h" +#include "common-hal/watchdog/WatchDogTimer.h" #include "common-hal/wifi/__init__.h" #include "supervisor/memory.h" #include "supervisor/shared/tick.h" @@ -119,6 +120,10 @@ void reset_port(void) { rtc_reset(); #endif +#if CIRCUITPY_WATCHDOG + watchdog_reset(); +#endif + #if CIRCUITPY_WIFI wifi_reset(); #endif -- cgit v1.2.3 From 231e3d362dae1988d5103b1042957ae793599d8b Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Sat, 14 Nov 2020 10:16:39 -0600 Subject: esp32s2: Update esp-idf submodule to include fix for #3424 This re-points the submodule to my personal fork of esp-idf. Users may need to `git submodule sync` in their existing trees when this change occurs. Adds just the following commit in esp-idf: > esp_crt_bundle: Allow verify_callback to correct BADCERT_BAD_MD --- .gitmodules | 2 +- ports/esp32s2/esp-idf | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/.gitmodules b/.gitmodules index f66ce8aaf..aaa66caf7 100644 --- a/.gitmodules +++ b/.gitmodules @@ -152,4 +152,4 @@ url = https://github.com/adafruit/Adafruit_CircuitPython_RFM69.git [submodule "ports/esp32s2/esp-idf"] path = ports/esp32s2/esp-idf - url = https://github.com/espressif/esp-idf.git + url = https://github.com/jepler/esp-idf.git diff --git a/ports/esp32s2/esp-idf b/ports/esp32s2/esp-idf index 8bc19ba89..d06744f5e 160000 --- a/ports/esp32s2/esp-idf +++ b/ports/esp32s2/esp-idf @@ -1 +1 @@ -Subproject commit 8bc19ba893e5544d571a753d82b44a84799b94b1 +Subproject commit d06744f5efc382c61cbad8758107cec308feef09 -- cgit v1.2.3 From 6c3c076cc110d935f0f8406de81007563994e553 Mon Sep 17 00:00:00 2001 From: RubenD Date: Fri, 13 Nov 2020 23:49:31 +0000 Subject: Translated using Weblate (Spanish) Currently translated at 99.2% (840 of 846 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/es/ --- locale/es.po | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/locale/es.po b/locale/es.po index ed7431eb7..c5e2ad75f 100644 --- a/locale/es.po +++ b/locale/es.po @@ -8,15 +8,15 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-01 16:26+0000\n" -"Last-Translator: Alvaro Figueroa \n" +"PO-Revision-Date: 2020-11-15 16:28+0000\n" +"Last-Translator: RubenD \n" "Language-Team: \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.3.2-dev\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -305,7 +305,7 @@ msgstr "Todos los periféricos I2C están siendo usados" #: ports/esp32s2/peripherals/pcnt_handler.c msgid "All PCNT units in use" -msgstr "" +msgstr "Todas las unidades PCNT en uso" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c @@ -445,7 +445,7 @@ msgstr "Bit clock y word select deben compartir una unidad de reloj" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Bit depth must be from 1 to 6 inclusive, not %d" -msgstr "" +msgstr "Bit depth tiene que ser de 1 a 6 inclusivo, no %d" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." -- cgit v1.2.3 From 76d60ba95bb79e0a553fd6f9dcb5cb25806ada2f Mon Sep 17 00:00:00 2001 From: Antonin ENFRUN Date: Fri, 13 Nov 2020 07:56:16 +0000 Subject: Translated using Weblate (French) Currently translated at 100.0% (846 of 846 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/fr/ --- locale/fr.po | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/locale/fr.po b/locale/fr.po index ff15b527e..5d4ca75d5 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -8,14 +8,14 @@ msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-10-22 20:48+0000\n" +"PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: Antonin ENFRUN \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.3.1\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -298,7 +298,7 @@ msgstr "Type d'adresse hors plage" #: ports/esp32s2/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" -msgstr "" +msgstr "Tous les périphériques CAN sont utilisés" #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" @@ -306,7 +306,7 @@ msgstr "Tous les périphériques I2C sont utilisés" #: ports/esp32s2/peripherals/pcnt_handler.c msgid "All PCNT units in use" -msgstr "" +msgstr "Toutes les unités PCNT sont utilisées" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c @@ -431,7 +431,7 @@ msgstr "" #: ports/esp32s2/common-hal/canio/CAN.c msgid "Baudrate not supported by peripheral" -msgstr "" +msgstr "Baudrate non prise en charge par le périphérique" #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c @@ -445,7 +445,7 @@ msgstr "'bit clock' et 'word select' doivent partager une horloge" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Bit depth must be from 1 to 6 inclusive, not %d" -msgstr "" +msgstr "Bit depth doit être compris entre 1 et 6 inclus, et non %d" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." @@ -2953,7 +2953,7 @@ msgstr "entiers longs non supportés dans cette build" #: ports/esp32s2/common-hal/canio/CAN.c msgid "loopback + silent mode not supported by peripheral" -msgstr "" +msgstr "loopback + silent mode non pris en charge par le périphérique" #: py/parse.c msgid "malformed f-string" @@ -2991,11 +2991,11 @@ msgstr "profondeur maximale de récursivité dépassée" #: extmod/ulab/code/approx/approx.c msgid "maxiter must be > 0" -msgstr "" +msgstr "maxiter doit être > 0" #: extmod/ulab/code/approx/approx.c msgid "maxiter should be > 0" -msgstr "" +msgstr "maxiter devrait être > 0" #: py/runtime.c #, c-format @@ -3440,7 +3440,7 @@ msgstr "l'argument de «sort» doit être un ndarray" #: extmod/ulab/code/numerical/numerical.c msgid "sorted axis can't be longer than 65535" -msgstr "" +msgstr "sorted axis ne peut pas dépasser 65535" #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" @@ -3575,12 +3575,12 @@ msgstr "tuple/liste a une mauvaise longueur" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_driver_install returned esp-idf error #%d" -msgstr "" +msgstr "twai_driver_install a renvoyé l'erreur esp-idf #%d" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_start returned esp-idf error #%d" -msgstr "" +msgstr "twai_start a renvoyé l'erreur esp-idf #%d" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -- cgit v1.2.3 From 8218eb2ddf92d979b16391a9a5400ab8a5ce2e67 Mon Sep 17 00:00:00 2001 From: Jonny Bergdahl Date: Fri, 13 Nov 2020 19:51:22 +0000 Subject: Translated using Weblate (Swedish) Currently translated at 100.0% (846 of 846 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/sv/ --- locale/sv.po | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/locale/sv.po b/locale/sv.po index be7eb0894..1a603e496 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-05 20:26+0000\n" +"PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" "Language: sv\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.3.2\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -302,7 +302,7 @@ msgstr "All I2C-kringutrustning används" #: ports/esp32s2/peripherals/pcnt_handler.c msgid "All PCNT units in use" -msgstr "" +msgstr "Alla PCNT-enheter används" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c @@ -438,7 +438,7 @@ msgstr "Bitklocka och ordval måste dela en klockenhet" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Bit depth must be from 1 to 6 inclusive, not %d" -msgstr "" +msgstr "Bitdjup måste vara inom 1 till 6, inte %d" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." -- cgit v1.2.3 From 64725190f47fbe3d2b4e54b0e58c485949878a89 Mon Sep 17 00:00:00 2001 From: hexthat Date: Sat, 14 Nov 2020 15:43:32 +0000 Subject: Translated using Weblate (Chinese (Pinyin)) Currently translated at 100.0% (846 of 846 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/zh_Latn/ --- locale/zh_Latn_pinyin.po | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 4ac1c3e1e..2731ec4f5 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-04 21:18+0530\n" -"PO-Revision-Date: 2020-11-11 19:13+0000\n" +"PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -440,7 +440,7 @@ msgstr "Bǐtè shízhōng hé dānzì xuǎnzé bìxū gòngxiǎng shízhōng dā #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Bit depth must be from 1 to 6 inclusive, not %d" -msgstr "" +msgstr "wèi shēn dù bì xū bāo hán 1 dào 6， ér bù shì %d" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." -- cgit v1.2.3 From c4917cdabd97c016a46b6193e93b274573d94193 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Mon, 16 Nov 2020 00:11:00 +0530 Subject: frequencyio implementation for esp32s2 --- ports/esp32s2/common-hal/frequencyio/FrequencyIn.c | 158 +++++++++++++++++++++ ports/esp32s2/common-hal/frequencyio/FrequencyIn.h | 43 ++++++ ports/esp32s2/common-hal/frequencyio/__init__.c | 1 + ports/esp32s2/mpconfigport.mk | 2 +- 4 files changed, 203 insertions(+), 1 deletion(-) create mode 100644 ports/esp32s2/common-hal/frequencyio/FrequencyIn.c create mode 100644 ports/esp32s2/common-hal/frequencyio/FrequencyIn.h create mode 100644 ports/esp32s2/common-hal/frequencyio/__init__.c diff --git a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c new file mode 100644 index 000000000..fce1d34d8 --- /dev/null +++ b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c @@ -0,0 +1,158 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/frequencyio/FrequencyIn.h" + +#include + +#include "py/runtime.h" + +#include "supervisor/shared/tick.h" +#include "shared-bindings/time/__init__.h" + +#include "common-hal/microcontroller/Pin.h" + +static void frequencyin_interrupt_handler(void *self_in) { + frequencyio_frequencyin_obj_t* self = self_in; + // get counter value + int16_t count; + pcnt_get_counter_value(self->unit, &count); + self->frequency = count / 2.0 / self->capture_period; + + // reset counter + pcnt_counter_clear(self->unit); +} + +static void init_timer(frequencyio_frequencyin_obj_t* self, uint16_t capture_period) { + // Prepare configuration for the timer module + timer_config_t config = { + .alarm_en = true, + .counter_en = false, + .intr_type = TIMER_INTR_LEVEL, + .counter_dir = TIMER_COUNT_UP, + .auto_reload = true, + .divider = 80 // 1 us per tick + }; + + // Initialize timer module + timer_init(TIMER_GROUP_0, TIMER_0, &config); + timer_set_counter_value(TIMER_GROUP_0, TIMER_0, 0); + timer_set_alarm_value(TIMER_GROUP_0, TIMER_0, capture_period * 1000000); + timer_enable_intr(TIMER_GROUP_0, TIMER_0); + timer_isr_register(TIMER_GROUP_0, TIMER_0, &frequencyin_interrupt_handler, (void *)self, 0, &self->handle); + + // Start timer + timer_start(TIMER_GROUP_0, TIMER_0); +} + +void common_hal_frequencyio_frequencyin_construct(frequencyio_frequencyin_obj_t* self, + const mcu_pin_obj_t* pin, const uint16_t capture_period) { + if ((capture_period == 0) || (capture_period > 500)) { + mp_raise_ValueError(translate("Invalid capture period. Valid range: 1 - 500")); + } + + // Prepare configuration for the PCNT unit + const pcnt_config_t pcnt_config = { + // Set PCNT input signal and control GPIOs + .pulse_gpio_num = pin->number, + .ctrl_gpio_num = PCNT_PIN_NOT_USED, + .channel = PCNT_CHANNEL_0, + .lctrl_mode = PCNT_MODE_DISABLE, + .hctrl_mode = PCNT_MODE_KEEP, + .pos_mode = PCNT_COUNT_INC, // count both rising and falling edges + .neg_mode = PCNT_COUNT_INC, + .counter_h_lim = 0, + .counter_l_lim = 0, + }; + + // Initialize PCNT unit + const int8_t unit = peripherals_pcnt_init(pcnt_config); + if (unit == -1) { + mp_raise_RuntimeError(translate("All PCNT units in use")); + } + + // set the GPIO back to high-impedance, as pcnt_unit_config sets it as pull-up + gpio_set_pull_mode(pin->number, GPIO_FLOATING); + + // initialize timer + init_timer(self, capture_period); + + self->pin = pin->number; + self->unit = (pcnt_unit_t)unit; + self->capture_period = capture_period; + + claim_pin(pin); +} + +bool common_hal_frequencyio_frequencyin_deinited(frequencyio_frequencyin_obj_t* self) { + return self->unit == PCNT_UNIT_MAX; +} + +void common_hal_frequencyio_frequencyin_deinit(frequencyio_frequencyin_obj_t* self) { + if (common_hal_frequencyio_frequencyin_deinited(self)) { + return; + } + reset_pin_number(self->pin); + peripherals_pcnt_deinit(&self->unit); + if (self->handle) { + timer_deinit(TIMER_GROUP_0, TIMER_0); + esp_intr_free(self->handle); + self->handle = NULL; + } +} + +uint32_t common_hal_frequencyio_frequencyin_get_item(frequencyio_frequencyin_obj_t* self) { + return (1000 / (self->capture_period / self->frequency)); +} + +void common_hal_frequencyio_frequencyin_pause(frequencyio_frequencyin_obj_t* self) { + pcnt_counter_pause(self->unit); + timer_pause(TIMER_GROUP_0, TIMER_0); +} + +void common_hal_frequencyio_frequencyin_resume(frequencyio_frequencyin_obj_t* self) { + pcnt_counter_resume(self->unit); + timer_start(TIMER_GROUP_0, TIMER_0); +} + +void common_hal_frequencyio_frequencyin_clear(frequencyio_frequencyin_obj_t* self) { + self->frequency = 0; + pcnt_counter_clear(self->unit); + timer_set_counter_value(TIMER_GROUP_0, TIMER_0, 0); +} + +uint16_t common_hal_frequencyio_frequencyin_get_capture_period(frequencyio_frequencyin_obj_t *self) { + return self->capture_period; +} + +void common_hal_frequencyio_frequencyin_set_capture_period(frequencyio_frequencyin_obj_t *self, uint16_t capture_period) { + if ((capture_period == 0) || (capture_period > 500)) { + mp_raise_ValueError(translate("Invalid capture period. Valid range: 1 - 500")); + } + self->capture_period = capture_period; + common_hal_frequencyio_frequencyin_clear(self); + timer_set_alarm_value(TIMER_GROUP_0, TIMER_0, capture_period * 1000000); +} diff --git a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.h b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.h new file mode 100644 index 000000000..01e617d13 --- /dev/null +++ b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.h @@ -0,0 +1,43 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_FREQUENCYIO_FREQUENCYIN_H +#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_FREQUENCYIO_FREQUENCYIN_H + +#include "py/obj.h" +#include "driver/timer.h" +#include "peripherals/pcnt.h" + +typedef struct { + mp_obj_base_t base; + pcnt_unit_t unit; + intr_handle_t handle; + uint8_t pin; + uint32_t frequency; + uint16_t capture_period; +} frequencyio_frequencyin_obj_t; + +#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_FREQUENCYIO_FREQUENCYIN_H diff --git a/ports/esp32s2/common-hal/frequencyio/__init__.c b/ports/esp32s2/common-hal/frequencyio/__init__.c new file mode 100644 index 000000000..487814bd0 --- /dev/null +++ b/ports/esp32s2/common-hal/frequencyio/__init__.c @@ -0,0 +1 @@ +// No ferquencyio module functions. diff --git a/ports/esp32s2/mpconfigport.mk b/ports/esp32s2/mpconfigport.mk index 4579b95ab..a84965a6a 100644 --- a/ports/esp32s2/mpconfigport.mk +++ b/ports/esp32s2/mpconfigport.mk @@ -18,7 +18,7 @@ CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_AUDIOIO = 0 CIRCUITPY_CANIO = 1 CIRCUITPY_COUNTIO = 1 -CIRCUITPY_FREQUENCYIO = 0 +CIRCUITPY_FREQUENCYIO = 1 CIRCUITPY_I2CPERIPHERAL = 0 CIRCUITPY_ROTARYIO = 1 CIRCUITPY_NVM = 0 -- cgit v1.2.3 From d4ab00f734203d358299508c01378d97ddf9d40f Mon Sep 17 00:00:00 2001 From: BennyE Date: Mon, 16 Nov 2020 00:31:06 +0100 Subject: Set station mode early to avoid SoftAP on startup --- ports/esp32s2/common-hal/wifi/Radio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index 275bae31a..1945da207 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -72,6 +72,8 @@ void common_hal_wifi_radio_set_enabled(wifi_radio_obj_t *self, bool enabled) { return; } if (!self->started && enabled) { + // esp_wifi_start() would default to soft-AP, thus setting it to station + ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA)); ESP_ERROR_CHECK(esp_wifi_start()); self->started = true; return; -- cgit v1.2.3 From 2bec02738fb7eacaaea710bd448b98a418eb2693 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Mon, 16 Nov 2020 11:44:11 +0530 Subject: move interrupt handler to iram --- ports/esp32s2/common-hal/frequencyio/FrequencyIn.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c index fce1d34d8..ec7ebb21a 100644 --- a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c +++ b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c @@ -35,7 +35,7 @@ #include "common-hal/microcontroller/Pin.h" -static void frequencyin_interrupt_handler(void *self_in) { +static void IRAM_ATTR frequencyin_interrupt_handler(void *self_in) { frequencyio_frequencyin_obj_t* self = self_in; // get counter value int16_t count; @@ -44,6 +44,10 @@ static void frequencyin_interrupt_handler(void *self_in) { // reset counter pcnt_counter_clear(self->unit); + + // reset interrupt + TIMERG0.int_clr.t0 = 1; + TIMERG0.hw_timer[0].config.alarm_en = 1; } static void init_timer(frequencyio_frequencyin_obj_t* self, uint16_t capture_period) { @@ -62,7 +66,7 @@ static void init_timer(frequencyio_frequencyin_obj_t* self, uint16_t capture_per timer_set_counter_value(TIMER_GROUP_0, TIMER_0, 0); timer_set_alarm_value(TIMER_GROUP_0, TIMER_0, capture_period * 1000000); timer_enable_intr(TIMER_GROUP_0, TIMER_0); - timer_isr_register(TIMER_GROUP_0, TIMER_0, &frequencyin_interrupt_handler, (void *)self, 0, &self->handle); + timer_isr_register(TIMER_GROUP_0, TIMER_0, frequencyin_interrupt_handler, (void *)self, ESP_INTR_FLAG_IRAM, &self->handle); // Start timer timer_start(TIMER_GROUP_0, TIMER_0); -- cgit v1.2.3 From f2824f6a68b3d326e0f4a137880e08147a0074d2 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Mon, 16 Nov 2020 12:55:55 +0530 Subject: update frequency measurement --- ports/esp32s2/common-hal/frequencyio/FrequencyIn.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c index ec7ebb21a..bdbe782ad 100644 --- a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c +++ b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c @@ -84,12 +84,9 @@ void common_hal_frequencyio_frequencyin_construct(frequencyio_frequencyin_obj_t* .pulse_gpio_num = pin->number, .ctrl_gpio_num = PCNT_PIN_NOT_USED, .channel = PCNT_CHANNEL_0, - .lctrl_mode = PCNT_MODE_DISABLE, - .hctrl_mode = PCNT_MODE_KEEP, + // What to do on the positive / negative edge of pulse input? .pos_mode = PCNT_COUNT_INC, // count both rising and falling edges .neg_mode = PCNT_COUNT_INC, - .counter_h_lim = 0, - .counter_l_lim = 0, }; // Initialize PCNT unit @@ -129,7 +126,7 @@ void common_hal_frequencyio_frequencyin_deinit(frequencyio_frequencyin_obj_t* se } uint32_t common_hal_frequencyio_frequencyin_get_item(frequencyio_frequencyin_obj_t* self) { - return (1000 / (self->capture_period / self->frequency)); + return self->frequency; } void common_hal_frequencyio_frequencyin_pause(frequencyio_frequencyin_obj_t* self) { -- cgit v1.2.3 From 0cd951fb73198f5c3dd03ea0463382edac0d3d4d Mon Sep 17 00:00:00 2001 From: root Date: Mon, 16 Nov 2020 10:36:05 -0600 Subject: Prevent exceptions from accumulating in REPL --- py/obj.c | 1 + 1 file changed, 1 insertion(+) diff --git a/py/obj.c b/py/obj.c index 9dc0cf474..315e816e0 100644 --- a/py/obj.c +++ b/py/obj.c @@ -125,6 +125,7 @@ void mp_obj_print_exception(const mp_print_t *print, mp_obj_t exc) { mp_printf(print, decompressed_block, block); } } + mp_obj_exception_clear_traceback(exc); } } mp_obj_print_helper(print, exc, PRINT_EXC); -- cgit v1.2.3 From 18e463cca538ed80f03ce9eda0e2ff757f1ba8f4 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Mon, 16 Nov 2020 23:32:22 +0530 Subject: add pcnt overflow handler & clean-up --- ports/esp32s2/common-hal/frequencyio/FrequencyIn.c | 91 +++++++++++++--------- ports/esp32s2/common-hal/frequencyio/FrequencyIn.h | 3 +- 2 files changed, 57 insertions(+), 37 deletions(-) diff --git a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c index bdbe782ad..20d744139 100644 --- a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c +++ b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c @@ -26,16 +26,21 @@ #include "shared-bindings/frequencyio/FrequencyIn.h" -#include - #include "py/runtime.h" -#include "supervisor/shared/tick.h" -#include "shared-bindings/time/__init__.h" +static void IRAM_ATTR pcnt_overflow_handler(void *self_in) { + frequencyio_frequencyin_obj_t* self = self_in; + // reset counter + pcnt_counter_clear(self->unit); -#include "common-hal/microcontroller/Pin.h" + // increase multiplier + self->multiplier++; + + // reset interrupt + PCNT.int_clr.val = BIT(self->unit); +} -static void IRAM_ATTR frequencyin_interrupt_handler(void *self_in) { +static void IRAM_ATTR timer_interrupt_handler(void *self_in) { frequencyio_frequencyin_obj_t* self = self_in; // get counter value int16_t count; @@ -50,9 +55,41 @@ static void IRAM_ATTR frequencyin_interrupt_handler(void *self_in) { TIMERG0.hw_timer[0].config.alarm_en = 1; } -static void init_timer(frequencyio_frequencyin_obj_t* self, uint16_t capture_period) { +static void init_pcnt(frequencyio_frequencyin_obj_t* self) { + // Prepare configuration for the PCNT unit + const pcnt_config_t pcnt_config = { + // Set PCNT input signal and control GPIOs + .pulse_gpio_num = self->pin, + .ctrl_gpio_num = PCNT_PIN_NOT_USED, + .channel = PCNT_CHANNEL_0, + // What to do on the positive / negative edge of pulse input? + .pos_mode = PCNT_COUNT_INC, // count both rising and falling edges + .neg_mode = PCNT_COUNT_INC, + // Set counter limit + .counter_h_lim = INT16_MAX, + .counter_l_lim = 0, + }; + + // Initialize PCNT unit + const int8_t unit = peripherals_pcnt_init(pcnt_config); + if (unit == -1) { + mp_raise_RuntimeError(translate("All PCNT units in use")); + } + + // set the GPIO back to high-impedance, as pcnt_unit_config sets it as pull-up + gpio_set_pull_mode(self->pin, GPIO_FLOATING); + + self->unit = (pcnt_unit_t)unit; + + // enable pcnt interrupt + pcnt_event_enable(self->unit, PCNT_EVT_H_LIM); + pcnt_isr_register(pcnt_overflow_handler, (void *)self, ESP_INTR_FLAG_IRAM, &self->handle); + pcnt_intr_enable(self->unit); +} + +static void init_timer(frequencyio_frequencyin_obj_t* self) { // Prepare configuration for the timer module - timer_config_t config = { + const timer_config_t config = { .alarm_en = true, .counter_en = false, .intr_type = TIMER_INTR_LEVEL, @@ -64,9 +101,9 @@ static void init_timer(frequencyio_frequencyin_obj_t* self, uint16_t capture_per // Initialize timer module timer_init(TIMER_GROUP_0, TIMER_0, &config); timer_set_counter_value(TIMER_GROUP_0, TIMER_0, 0); - timer_set_alarm_value(TIMER_GROUP_0, TIMER_0, capture_period * 1000000); + timer_set_alarm_value(TIMER_GROUP_0, TIMER_0, self->capture_period * 1000000); + timer_isr_register(TIMER_GROUP_0, TIMER_0, timer_interrupt_handler, (void *)self, ESP_INTR_FLAG_IRAM, &self->handle); timer_enable_intr(TIMER_GROUP_0, TIMER_0); - timer_isr_register(TIMER_GROUP_0, TIMER_0, frequencyin_interrupt_handler, (void *)self, ESP_INTR_FLAG_IRAM, &self->handle); // Start timer timer_start(TIMER_GROUP_0, TIMER_0); @@ -78,33 +115,15 @@ void common_hal_frequencyio_frequencyin_construct(frequencyio_frequencyin_obj_t* mp_raise_ValueError(translate("Invalid capture period. Valid range: 1 - 500")); } - // Prepare configuration for the PCNT unit - const pcnt_config_t pcnt_config = { - // Set PCNT input signal and control GPIOs - .pulse_gpio_num = pin->number, - .ctrl_gpio_num = PCNT_PIN_NOT_USED, - .channel = PCNT_CHANNEL_0, - // What to do on the positive / negative edge of pulse input? - .pos_mode = PCNT_COUNT_INC, // count both rising and falling edges - .neg_mode = PCNT_COUNT_INC, - }; - - // Initialize PCNT unit - const int8_t unit = peripherals_pcnt_init(pcnt_config); - if (unit == -1) { - mp_raise_RuntimeError(translate("All PCNT units in use")); - } - - // set the GPIO back to high-impedance, as pcnt_unit_config sets it as pull-up - gpio_set_pull_mode(pin->number, GPIO_FLOATING); - - // initialize timer - init_timer(self, capture_period); - self->pin = pin->number; - self->unit = (pcnt_unit_t)unit; + self->handle = NULL; + self->multiplier = 0; self->capture_period = capture_period; + // initialize pcnt and timer + init_pcnt(self); + init_timer(self); + claim_pin(pin); } @@ -118,15 +137,15 @@ void common_hal_frequencyio_frequencyin_deinit(frequencyio_frequencyin_obj_t* se } reset_pin_number(self->pin); peripherals_pcnt_deinit(&self->unit); + timer_deinit(TIMER_GROUP_0, TIMER_0); if (self->handle) { - timer_deinit(TIMER_GROUP_0, TIMER_0); esp_intr_free(self->handle); self->handle = NULL; } } uint32_t common_hal_frequencyio_frequencyin_get_item(frequencyio_frequencyin_obj_t* self) { - return self->frequency; + return (self->frequency + (self->multiplier * INT16_MAX)); } void common_hal_frequencyio_frequencyin_pause(frequencyio_frequencyin_obj_t* self) { diff --git a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.h b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.h index 01e617d13..ce3bf8f2f 100644 --- a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.h +++ b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.h @@ -36,7 +36,8 @@ typedef struct { pcnt_unit_t unit; intr_handle_t handle; uint8_t pin; - uint32_t frequency; + uint8_t multiplier; + uint16_t frequency; uint16_t capture_period; } frequencyio_frequencyin_obj_t; -- cgit v1.2.3 From 9c4b6c34b8cfacdc86074df261a4eac0fc23b129 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 16 Nov 2020 16:03:29 -0600 Subject: see what happens if workflows move to ubuntu 20.04 --- .github/workflows/build.yml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index c83f37e6e..bd0dea5cf 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -14,7 +14,7 @@ on: jobs: test: - runs-on: ubuntu-18.04 + runs-on: ubuntu-20.04 steps: - name: Dump GitHub context env: @@ -165,7 +165,7 @@ jobs: build-arm: - runs-on: ubuntu-18.04 + runs-on: ubuntu-20.04 needs: test strategy: fail-fast: false @@ -368,7 +368,7 @@ jobs: if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) build-riscv: - runs-on: ubuntu-18.04 + runs-on: ubuntu-20.04 needs: test strategy: fail-fast: false -- cgit v1.2.3 From 3b27810a3ab6c15d0612b986e6f6086aecccdbcb Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Tue, 17 Nov 2020 00:02:02 +0100 Subject: Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 15 +++++++++++++-- locale/cs.po | 15 +++++++++++++-- locale/de_DE.po | 15 +++++++++++++-- locale/el.po | 15 +++++++++++++-- locale/es.po | 15 +++++++++++++-- locale/fil.po | 15 +++++++++++++-- locale/fr.po | 15 +++++++++++++-- locale/hi.po | 15 +++++++++++++-- locale/it_IT.po | 15 +++++++++++++-- locale/ja.po | 15 +++++++++++++-- locale/ko.po | 15 +++++++++++++-- locale/nl.po | 15 +++++++++++++-- locale/pl.po | 15 +++++++++++++-- locale/pt_BR.po | 15 +++++++++++++-- locale/sv.po | 15 +++++++++++++-- locale/zh_Latn_pinyin.po | 15 +++++++++++++-- 16 files changed, 208 insertions(+), 32 deletions(-) diff --git a/locale/ID.po b/locale/ID.po index 90e416b3b..d6672b1e4 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-10-10 23:51+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" @@ -300,7 +300,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Semua perangkat I2C sedang digunakan" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1018,6 +1019,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Ukuran penyangga salah" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3254,6 +3259,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3469,6 +3475,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3653,6 +3660,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index f02d31e4d..bde3a20b8 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-05-24 03:22+0000\n" "Last-Translator: dronecz \n" "Language-Team: LANGUAGE \n" @@ -300,7 +300,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1001,6 +1002,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3210,6 +3215,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3425,6 +3431,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3608,6 +3615,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index c2cb26550..dabc48659 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-06-16 18:24+0000\n" "Last-Translator: Andreas Buchen \n" "Language: de_DE\n" @@ -299,7 +299,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Alle I2C-Peripheriegeräte sind in Benutzung" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1018,6 +1019,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Inkorrekte Puffergröße" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3293,6 +3298,7 @@ msgstr "pow() drittes Argument darf nicht 0 sein" msgid "pow() with 3 arguments requires integers" msgstr "pow () mit 3 Argumenten erfordert Integer" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3511,6 +3517,7 @@ msgstr "threshold muss im Intervall 0-65536 liegen" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() nimmt eine 9-Sequenz an" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "Das Zeitlimit hat den maximal zulässigen Wert überschritten" @@ -3698,6 +3705,10 @@ msgstr "value_count muss größer als 0 sein" msgid "vectors must have same lengths" msgstr "Vektoren müssen die selbe Länge haben" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/el.po b/locale/el.po index 4d7bff193..0d35c20ce 100644 --- a/locale/el.po +++ b/locale/el.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -295,7 +295,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -996,6 +997,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3205,6 +3210,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3420,6 +3426,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3603,6 +3610,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/es.po b/locale/es.po index c5e2ad75f..bdb4b68a5 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: RubenD \n" "Language-Team: \n" @@ -303,7 +303,8 @@ msgstr "Todos los periféricos CAN están en uso" msgid "All I2C peripherals are in use" msgstr "Todos los periféricos I2C están siendo usados" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "Todas las unidades PCNT en uso" @@ -1019,6 +1020,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Tamaño incorrecto del buffer" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "La entrada está durando mucho tiempo" @@ -3281,6 +3286,7 @@ msgstr "el 3er argumento de pow() no puede ser 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() con 3 argumentos requiere enteros" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3498,6 +3504,7 @@ msgstr "limite debe ser en el rango 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() toma un sequencio 9" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3682,6 +3689,10 @@ msgstr "value_count debe ser > 0" msgid "vectors must have same lengths" msgstr "los vectores deben tener el mismo tamaño" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "el tiempo de espera del perro guardián debe ser mayor a 0" diff --git a/locale/fil.po b/locale/fil.po index 93f41a88e..c74e13c6c 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy \n" "Language-Team: fil\n" @@ -297,7 +297,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Lahat ng I2C peripherals ginagamit" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1011,6 +1012,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3256,6 +3261,7 @@ msgstr "pow() 3rd argument ay hindi maaring 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() na may 3 argumento kailangan ng integers" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3474,6 +3480,7 @@ msgstr "ang threshold ay dapat sa range 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() kumukuha ng 9-sequence" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3658,6 +3665,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/fr.po b/locale/fr.po index 5d4ca75d5..a15bbb8d5 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: Antonin ENFRUN \n" "Language: fr\n" @@ -304,7 +304,8 @@ msgstr "Tous les périphériques CAN sont utilisés" msgid "All I2C peripherals are in use" msgstr "Tous les périphériques I2C sont utilisés" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "Toutes les unités PCNT sont utilisées" @@ -1024,6 +1025,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Taille de tampon incorrecte" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "L'entrée prend trop de temps" @@ -3305,6 +3310,7 @@ msgstr "le 3e argument de pow() ne peut être 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() avec 3 arguments nécessite des entiers" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3523,6 +3529,7 @@ msgstr "le seuil doit être dans la gamme 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() prend une séquence de longueur 9" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "le délai d'expiration a dépassé la valeur maximale prise en charge" @@ -3706,6 +3713,10 @@ msgstr "'value_count' doit être > 0" msgid "vectors must have same lengths" msgstr "les vecteurs doivent avoir la même longueur" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "watchdog timeout doit être supérieur à 0" diff --git a/locale/hi.po b/locale/hi.po index aea2b3f0c..6c49e1f01 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -295,7 +295,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -996,6 +997,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3205,6 +3210,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3420,6 +3426,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3603,6 +3610,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index 603cf9fd0..fc0f01675 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin \n" "Language-Team: \n" @@ -296,7 +296,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Tutte le periferiche I2C sono in uso" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1011,6 +1012,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3263,6 +3268,7 @@ msgstr "il terzo argomento di pow() non può essere 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() con 3 argomenti richiede interi" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3481,6 +3487,7 @@ msgstr "la soglia deve essere nell'intervallo 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3665,6 +3672,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/ja.po b/locale/ja.po index 80486dc21..f3dfc6c90 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-12 22:51+0000\n" "Last-Translator: sporeball \n" "Language-Team: none\n" @@ -302,7 +302,8 @@ msgstr "全てのCAN周辺機器が使用中" msgid "All I2C peripherals are in use" msgstr "全てのI2C周辺機器が使用中" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1011,6 +1012,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "バッファサイズが正しくありません" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3237,6 +3242,7 @@ msgstr "pow()の3つ目の引数は0にできません" msgid "pow() with 3 arguments requires integers" msgstr "pow()の第3引数には整数が必要" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3453,6 +3459,7 @@ msgstr "threshouldは0から65536まで" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time()は9要素のシーケンスを受け取ります" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "タイムアウト長は対応する最大値を超えています" @@ -3636,6 +3643,10 @@ msgstr "value_countは0より大きくなければなりません" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "watchdogのtimeoutは0以上でなければなりません" diff --git a/locale/ko.po b/locale/ko.po index c9215fb85..bfa49ab70 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-10-05 12:12+0000\n" "Last-Translator: Michal Čihař \n" "Language-Team: LANGUAGE \n" @@ -298,7 +298,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "사용중인 모든 I2C주변 기기" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1001,6 +1002,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3211,6 +3216,7 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3426,6 +3432,7 @@ msgstr "" msgid "time.struct_time() takes a 9-sequence" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3609,6 +3616,10 @@ msgstr "" msgid "vectors must have same lengths" msgstr "" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index cfe2193bb..7625cdb26 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-10-27 16:47+0000\n" "Last-Translator: Jelle Jager \n" "Language-Team: none\n" @@ -300,7 +300,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Alle I2C peripherals zijn in gebruik" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1013,6 +1014,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Incorrecte buffer grootte" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "Invoer duurt te lang" @@ -3270,6 +3275,7 @@ msgstr "derde argument van pow() mag geen 0 zijn" msgid "pow() with 3 arguments requires integers" msgstr "pow() met 3 argumenten vereist integers" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3487,6 +3493,7 @@ msgstr "drempelwaarde moet in het bereik 0-65536 liggen" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() accepteert een 9-rij" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "time-outduur is groter dan de ondersteunde maximale waarde" @@ -3670,6 +3677,10 @@ msgstr "value_count moet groter dan 0 zijn" msgid "vectors must have same lengths" msgstr "vectoren moeten van gelijke lengte zijn" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "watchdog time-out moet groter zijn dan 0" diff --git a/locale/pl.po b/locale/pl.po index 623acd4c5..f04887e68 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-11 19:13+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" @@ -302,7 +302,8 @@ msgstr "" msgid "All I2C peripherals are in use" msgstr "Wszystkie peryferia I2C w użyciu" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "" @@ -1011,6 +1012,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Niewłaściwa wielkość bufora" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" @@ -3229,6 +3234,7 @@ msgstr "trzeci argument pow() nie może być 0" msgid "pow() with 3 arguments requires integers" msgstr "trzyargumentowe pow() wymaga liczb całkowitych" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3445,6 +3451,7 @@ msgstr "threshold musi być w zakresie 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() wymaga 9-elementowej sekwencji" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3628,6 +3635,10 @@ msgstr "value_count musi być > 0" msgid "vectors must have same lengths" msgstr "wektory muszą mieć identyczną długość" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 67b3dc8a7..491868979 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-08 10:26+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" @@ -304,7 +304,8 @@ msgstr "Todos os periféricos CAN estão em uso" msgid "All I2C peripherals are in use" msgstr "Todos os periféricos I2C estão em uso" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "Todas as unidades PCNT estão em uso" @@ -1022,6 +1023,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "O tamanho do buffer está incorreto" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "A entrada está demorando demais" @@ -3296,6 +3301,7 @@ msgstr "O terceiro argumento pow() não pode ser 0" msgid "pow() with 3 arguments requires integers" msgstr "o pow() com 3 argumentos requer números inteiros" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3513,6 +3519,7 @@ msgstr "Limite deve estar no alcance de 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() leva uma sequência com 9" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "a duração do tempo limite excedeu o valor máximo suportado" @@ -3696,6 +3703,10 @@ msgstr "o value_count deve ser > 0" msgid "vectors must have same lengths" msgstr "os vetores devem ter os mesmos comprimentos" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "o tempo limite do watchdog deve ser maior que 0" diff --git a/locale/sv.po b/locale/sv.po index 1a603e496..55e6368ae 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" @@ -300,7 +300,8 @@ msgstr "All I2C-kringutrustning används" msgid "All I2C peripherals are in use" msgstr "All I2C-kringutrustning används" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "Alla PCNT-enheter används" @@ -1011,6 +1012,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Fel buffertstorlek" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "Indata tar för lång tid" @@ -3263,6 +3268,7 @@ msgstr "pow() 3: e argument kan inte vara 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() med 3 argument kräver heltal" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3480,6 +3486,7 @@ msgstr "tröskelvärdet måste ligga i intervallet 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() kräver en 9-sekvens" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "timeout-längd överskred det maximala värde som stöds" @@ -3663,6 +3670,10 @@ msgstr "value_count måste vara > 0" msgid "vectors must have same lengths" msgstr "vektorer måste ha samma längd" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "watchdog timeout måste vara större än 0" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 2731ec4f5..dd44aab93 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-04 21:18+0530\n" +"POT-Creation-Date: 2020-11-10 15:30+0530\n" "PO-Revision-Date: 2020-11-15 16:28+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -302,7 +302,8 @@ msgstr "suǒ yǒu CAN wài shè dōu zài shǐ yòng zhōng" msgid "All I2C peripherals are in use" msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng" -#: ports/esp32s2/peripherals/pcnt_handler.c +#: ports/esp32s2/common-hal/countio/Counter.c +#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "suǒ yǒu zhèng zài shǐ yòng zhōng de PCNT dān yuán" @@ -1009,6 +1010,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "Initialization failed due to lack of memory" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "Shūrù shíjiānguò zhǎng" @@ -3252,6 +3257,7 @@ msgstr "pow() 3 cān shǔ bùnéng wéi 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() yǒu 3 cānshù xūyào zhěngshù" +#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -3469,6 +3475,7 @@ msgstr "yùzhí bìxū zài fànwéi 0-65536" msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() xūyào 9 xùliè" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "chāoshí shíjiān chāoguò zuìdà zhīchí zhí" @@ -3652,6 +3659,10 @@ msgstr "zhí jìshù bìxū wèi > 0" msgid "vectors must have same lengths" msgstr "xiàngliàng bìxū jùyǒu xiāngtóng de chángdù" +#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c +msgid "watchdog not initialized" +msgstr "" + #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "kān mén gǒu chāoshí bìxū dàyú 0" -- cgit v1.2.3 From 7750b4d6712b410bd8ccc498e571297b4628884a Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 17 Nov 2020 07:37:07 -0600 Subject: actions: Disable pagination of 'aws' commands An anticipatory workaround for https://docs.aws.amazon.com/cli/latest/userguide/cliv2-migration.html#cliv2-migration-output-pager --- .github/workflows/build.yml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index bd0dea5cf..9c3c87b58 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -119,6 +119,7 @@ jobs: zip -9r circuitpython-stubs.zip circuitpython-stubs [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp circuitpython-stubs.zip s3://adafruit-circuit-python/bin/stubs/circuitpython-stubs-${{ env.CP_VERSION }}.zip --no-progress --region us-east-1 env: + AWS_PAGER: '' AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) @@ -159,6 +160,7 @@ jobs: run: | [ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross-macos-catalina-${{ env.CP_VERSION }} --no-progress --region us-east-1 env: + AWS_PAGER: '' AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) @@ -363,6 +365,7 @@ jobs: - name: Upload to S3 run: "[ -z \"$AWS_ACCESS_KEY_ID\" ] || aws s3 cp bin/ s3://adafruit-circuit-python/bin/ --recursive --no-progress --region us-east-1" env: + AWS_PAGER: '' AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) @@ -411,6 +414,7 @@ jobs: - name: Upload to S3 run: "[ -z \"$AWS_ACCESS_KEY_ID\" ] || aws s3 cp bin/ s3://adafruit-circuit-python/bin/ --recursive --no-progress --region us-east-1" env: + AWS_PAGER: '' AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) @@ -505,6 +509,7 @@ jobs: - name: Upload to S3 run: "[ -z \"$AWS_ACCESS_KEY_ID\" ] || aws s3 cp bin/ s3://adafruit-circuit-python/bin/ --recursive --no-progress --region us-east-1" env: + AWS_PAGER: '' AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }} AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) -- cgit v1.2.3 From a0d305042c335d55176a8f6951572b1a1b7629ba Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 17 Nov 2020 09:01:50 -0600 Subject: fix ubuntu-latest stragglers --- .github/workflows/build.yml | 2 +- .github/workflows/create_website_pr.yml | 2 +- .github/workflows/pre-commit.yml | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 9c3c87b58..f3e728a05 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -419,7 +419,7 @@ jobs: AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }} if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested')) build-xtensa: - runs-on: ubuntu-latest + runs-on: ubuntu-20.04 needs: test strategy: fail-fast: false diff --git a/.github/workflows/create_website_pr.yml b/.github/workflows/create_website_pr.yml index 71959ffdc..c8aca30e4 100644 --- a/.github/workflows/create_website_pr.yml +++ b/.github/workflows/create_website_pr.yml @@ -10,7 +10,7 @@ on: jobs: website: - runs-on: ubuntu-latest + runs-on: ubuntu-20.04 steps: - name: Dump GitHub context env: diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index eac9bfe09..8caf56d26 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -11,7 +11,7 @@ on: jobs: pre-commit: - runs-on: ubuntu-latest + runs-on: ubuntu-20.04 steps: - uses: actions/checkout@v1 - uses: actions/setup-python@v1 -- cgit v1.2.3 From 1bc770c3dc308b91184e8cab52f6f4cabdda99fc Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 17 Nov 2020 17:31:54 -0600 Subject: esp32s2: PulseIn: Fix supervisor tick enabling Before, there were two problems: * Even if a pulsein was never constructed, supervisor_disable_tick would occur during restart. This could cancel out a supervisor_enable_tick from someplace else, with unexpected results. * If two or more pulseins were constructed, each one would enable ticks, but only the last one deinited (or the reset routine) would disable, leaving ticks running indefinitely. In my testing, it seemed that this led to the board sometimes stopping when it should have auto-reloaded. --- ports/esp32s2/common-hal/pulseio/PulseIn.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/common-hal/pulseio/PulseIn.c b/ports/esp32s2/common-hal/pulseio/PulseIn.c index f7429ec12..9feeea147 100644 --- a/ports/esp32s2/common-hal/pulseio/PulseIn.c +++ b/ports/esp32s2/common-hal/pulseio/PulseIn.c @@ -77,7 +77,9 @@ void pulsein_reset(void) { for (size_t i = 0; i < RMT_CHANNEL_MAX; i++) { handles[i] = NULL; } - supervisor_disable_tick(); + if (refcount != 0) { + supervisor_disable_tick(); + } refcount = 0; } @@ -122,8 +124,10 @@ void common_hal_pulseio_pulsein_construct(pulseio_pulsein_obj_t* self, const mcu // start RMT RX, and enable ticks so the core doesn't turn off. rmt_rx_start(channel, true); - supervisor_enable_tick(); refcount++; + if (refcount == 1) { + supervisor_enable_tick(); + } } bool common_hal_pulseio_pulsein_deinited(pulseio_pulsein_obj_t* self) { -- cgit v1.2.3 From 9206925bf8d2e3d8220b59200ee50c3e4c8a64d2 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 17 Nov 2020 17:45:12 -0600 Subject: esp32s2: port_get_raw_ticks: Use a more efficient, monotonic routine While trying to debug #3572, I noticed that I would frequently break in the midst of gettimeofday and that the routine get_adjusted_boot_time had to take and release locks. Furthermore, we don't want "adjusted" boot time, which could go forwards or backwards depending on the adjustment (such as setting the clock used by gettimeofday() to the network time) --- ports/esp32s2/supervisor/port.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 47d0c7f46..876ad739d 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -191,14 +191,14 @@ uint32_t port_get_saved_word(void) { } uint64_t port_get_raw_ticks(uint8_t* subticks) { - struct timeval tv_now; - gettimeofday(&tv_now, NULL); - // convert usec back to ticks - uint64_t all_subticks = (uint64_t)(tv_now.tv_usec * 2) / 71; + // Convert microseconds to subticks of 1/32768 seconds + // 32768/1000000 = 64/15625 in lowest terms + // this arithmetic overflows after 570 years + int64_t all_subticks = esp_timer_get_time() * 512 / 15625; if (subticks != NULL) { *subticks = all_subticks % 32; } - return (uint64_t)tv_now.tv_sec * 1024L + all_subticks / 32; + return all_subticks / 32; } // Enable 1/1024 second tick. -- cgit v1.2.3 From 8ae7b996278f379b6d40b2d3cf9729b5be53abd9 Mon Sep 17 00:00:00 2001 From: Wellington Terumi Uemura Date: Mon, 16 Nov 2020 23:32:22 +0000 Subject: Translated using Weblate (Portuguese (Brazil)) Currently translated at 100.0% (848 of 848 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pt_BR/ --- locale/pt_BR.po | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 491868979..4cf204ae8 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-10 15:30+0530\n" -"PO-Revision-Date: 2020-11-08 10:26+0000\n" +"PO-Revision-Date: 2020-11-18 00:28+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.3.2\n" +"X-Generator: Weblate 4.4-dev\n" #: main.c msgid "" @@ -447,7 +447,7 @@ msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Bit depth must be from 1 to 6 inclusive, not %d" -msgstr "" +msgstr "A profundidade dos bits deve ser de 1 até 6 inclusive, porém não %d" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." @@ -1025,7 +1025,7 @@ msgstr "O tamanho do buffer está incorreto" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" -msgstr "" +msgstr "A inicialização falhou devido à falta de memória" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" @@ -3705,7 +3705,7 @@ msgstr "os vetores devem ter os mesmos comprimentos" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "watchdog not initialized" -msgstr "" +msgstr "o watchdog não foi inicializado" #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" -- cgit v1.2.3 From ff987e7496152c3175608570d90f36753b4c4670 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Wed, 18 Nov 2020 12:16:14 +0530 Subject: add timer peripheral --- ports/esp32s2/Makefile | 1 + ports/esp32s2/peripherals/timer.c | 73 +++++++++++++++++++++++++++++++++++++++ ports/esp32s2/peripherals/timer.h | 41 ++++++++++++++++++++++ ports/esp32s2/supervisor/port.c | 23 +++++++----- 4 files changed, 129 insertions(+), 9 deletions(-) create mode 100644 ports/esp32s2/peripherals/timer.c create mode 100644 ports/esp32s2/peripherals/timer.h diff --git a/ports/esp32s2/Makefile b/ports/esp32s2/Makefile index 55d6e91d4..931e4d063 100644 --- a/ports/esp32s2/Makefile +++ b/ports/esp32s2/Makefile @@ -188,6 +188,7 @@ SRC_C += \ lib/utils/pyexec.c \ lib/utils/stdout_helpers.c \ lib/utils/sys_stdio_mphal.c \ + peripherals/timer.c \ peripherals/pcnt.c \ peripherals/pins.c \ peripherals/rmt.c \ diff --git a/ports/esp32s2/peripherals/timer.c b/ports/esp32s2/peripherals/timer.c new file mode 100644 index 000000000..3aee33dc5 --- /dev/null +++ b/ports/esp32s2/peripherals/timer.c @@ -0,0 +1,73 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "peripherals/timer.h" + +#define TIMER_FREE 1 +#define TIMER_BUSY 0 + +static uint8_t timer_state[2][2]; + +void peripherals_timer_reset(void) { + timer_index_t timer; + for (uint8_t i = 0; i < 2; i++) { + for (uint8_t j = 0; j < 2; j++) { + if (timer_state[i][j] == TIMER_BUSY) { + timer.idx = (timer_idx_t)j; + timer.group = (timer_group_t)i; + timer_state[i][j] = TIMER_FREE; + peripherals_timer_deinit(&timer); + } + } + } +} + +void peripherals_timer_init(const timer_config_t * config, timer_index_t * timer) { + // get free timer + for (uint8_t i = 0; i < 2; i++) { + for (uint8_t j = 0; j < 2; j++) { + if (timer_state[i][j] == TIMER_FREE) { + timer->idx = (timer_idx_t)j; + timer->group = (timer_group_t)i; + timer_state[i][j] = TIMER_BUSY; + goto init_timer; + } else if (i == 1 && j == 1) { + timer->idx = TIMER_MAX; + timer->group = TIMER_GROUP_MAX; + return; + } + } + } + +init_timer: + // initialize timer module + timer_init(timer->group, timer->idx, config); + timer_set_counter_value(timer->group, timer->idx, 0); +} + +void peripherals_timer_deinit(timer_index_t * timer) { + timer_deinit(timer->group, timer->idx); +} diff --git a/ports/esp32s2/peripherals/timer.h b/ports/esp32s2/peripherals/timer.h new file mode 100644 index 000000000..8c9ebd91c --- /dev/null +++ b/ports/esp32s2/peripherals/timer.h @@ -0,0 +1,41 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_PERIPHERALS_TIMER_HANDLER_H +#define MICROPY_INCLUDED_ESP32S2_PERIPHERALS_TIMER_HANDLER_H + +#include "driver/timer.h" + +typedef struct { + timer_idx_t idx; + timer_group_t group; +} timer_index_t; + +extern void peripherals_timer_init(const timer_config_t * config, timer_index_t * timer); +extern void peripherals_timer_deinit(timer_index_t * timer); +extern void peripherals_timer_reset(void); + +#endif // MICROPY_INCLUDED_ESP32S2_PERIPHERALS_TIMER_HANDLER_H diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index ef032c4a7..4bf792516 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -50,6 +50,7 @@ #include "peripherals/rmt.h" #include "peripherals/pcnt.h" +#include "peripherals/timer.h" #include "components/heap/include/esp_heap_caps.h" #include "components/soc/soc/esp32s2/include/soc/cache_memory.h" @@ -103,15 +104,6 @@ void reset_port(void) { analogout_reset(); #endif -#if CIRCUITPY_PULSEIO - esp32s2_peripherals_rmt_reset(); - pulsein_reset(); -#endif - -#if CIRCUITPY_PWMIO - pwmout_reset(); -#endif - #if CIRCUITPY_BUSIO i2c_reset(); spi_reset(); @@ -122,6 +114,19 @@ void reset_port(void) { peripherals_pcnt_reset(); #endif +#if CIRCUITPY_FREQUENCYIO + peripherals_timer_reset(); +#endif + +#if CIRCUITPY_PULSEIO + esp32s2_peripherals_rmt_reset(); + pulsein_reset(); +#endif + +#if CIRCUITPY_PWMIO + pwmout_reset(); +#endif + #if CIRCUITPY_RTC rtc_reset(); #endif -- cgit v1.2.3 From c457d373e18a5bcadec44e0815bea8b9beb30a97 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Wed, 18 Nov 2020 12:24:48 +0530 Subject: update init_timer & frequency calculation --- ports/esp32s2/common-hal/frequencyio/FrequencyIn.c | 55 ++++++++++++++-------- ports/esp32s2/common-hal/frequencyio/FrequencyIn.h | 5 +- 2 files changed, 38 insertions(+), 22 deletions(-) diff --git a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c index 20d744139..12d612abb 100644 --- a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c +++ b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.c @@ -29,7 +29,7 @@ #include "py/runtime.h" static void IRAM_ATTR pcnt_overflow_handler(void *self_in) { - frequencyio_frequencyin_obj_t* self = self_in; + frequencyio_frequencyin_obj_t * self = self_in; // reset counter pcnt_counter_clear(self->unit); @@ -41,18 +41,26 @@ static void IRAM_ATTR pcnt_overflow_handler(void *self_in) { } static void IRAM_ATTR timer_interrupt_handler(void *self_in) { - frequencyio_frequencyin_obj_t* self = self_in; + frequencyio_frequencyin_obj_t * self = self_in; // get counter value int16_t count; pcnt_get_counter_value(self->unit, &count); - self->frequency = count / 2.0 / self->capture_period; + self->frequency = ((count / 2.0) + (self->multiplier * INT16_MAX / 4.0)) / (self->capture_period); + + // reset multiplier + self->multiplier = 0; // reset counter pcnt_counter_clear(self->unit); // reset interrupt - TIMERG0.int_clr.t0 = 1; - TIMERG0.hw_timer[0].config.alarm_en = 1; + timg_dev_t *device = self->timer.group ? &(TIMERG1) : &(TIMERG0); + if (self->timer.idx) { + device->int_clr.t1 = 1; + } else { + device->int_clr.t0 = 1; + } + device->hw_timer[self->timer.idx].config.alarm_en = 1; } static void init_pcnt(frequencyio_frequencyin_obj_t* self) { @@ -70,7 +78,7 @@ static void init_pcnt(frequencyio_frequencyin_obj_t* self) { .counter_l_lim = 0, }; - // Initialize PCNT unit + // initialize PCNT const int8_t unit = peripherals_pcnt_init(pcnt_config); if (unit == -1) { mp_raise_RuntimeError(translate("All PCNT units in use")); @@ -98,15 +106,22 @@ static void init_timer(frequencyio_frequencyin_obj_t* self) { .divider = 80 // 1 us per tick }; - // Initialize timer module - timer_init(TIMER_GROUP_0, TIMER_0, &config); - timer_set_counter_value(TIMER_GROUP_0, TIMER_0, 0); - timer_set_alarm_value(TIMER_GROUP_0, TIMER_0, self->capture_period * 1000000); - timer_isr_register(TIMER_GROUP_0, TIMER_0, timer_interrupt_handler, (void *)self, ESP_INTR_FLAG_IRAM, &self->handle); - timer_enable_intr(TIMER_GROUP_0, TIMER_0); + // initialize Timer + peripherals_timer_init(&config, &self->timer); + if (self->timer.idx == TIMER_MAX || self->timer.group == TIMER_GROUP_MAX) { + mp_raise_RuntimeError(translate("All timers in use")); + } + + timer_idx_t idx = self->timer.idx; + timer_group_t group = self->timer.group; + + // enable timer interrupt + timer_set_alarm_value(group, idx, self->capture_period * 1000000); + timer_isr_register(group, idx, timer_interrupt_handler, (void *)self, ESP_INTR_FLAG_IRAM, &self->handle); + timer_enable_intr(group, idx); - // Start timer - timer_start(TIMER_GROUP_0, TIMER_0); + // start timer + timer_start(self->timer.group, self->timer.idx); } void common_hal_frequencyio_frequencyin_construct(frequencyio_frequencyin_obj_t* self, @@ -137,7 +152,7 @@ void common_hal_frequencyio_frequencyin_deinit(frequencyio_frequencyin_obj_t* se } reset_pin_number(self->pin); peripherals_pcnt_deinit(&self->unit); - timer_deinit(TIMER_GROUP_0, TIMER_0); + peripherals_timer_deinit(&self->timer); if (self->handle) { esp_intr_free(self->handle); self->handle = NULL; @@ -145,23 +160,23 @@ void common_hal_frequencyio_frequencyin_deinit(frequencyio_frequencyin_obj_t* se } uint32_t common_hal_frequencyio_frequencyin_get_item(frequencyio_frequencyin_obj_t* self) { - return (self->frequency + (self->multiplier * INT16_MAX)); + return self->frequency; } void common_hal_frequencyio_frequencyin_pause(frequencyio_frequencyin_obj_t* self) { pcnt_counter_pause(self->unit); - timer_pause(TIMER_GROUP_0, TIMER_0); + timer_pause(self->timer.group, self->timer.idx); } void common_hal_frequencyio_frequencyin_resume(frequencyio_frequencyin_obj_t* self) { pcnt_counter_resume(self->unit); - timer_start(TIMER_GROUP_0, TIMER_0); + timer_start(self->timer.group, self->timer.idx); } void common_hal_frequencyio_frequencyin_clear(frequencyio_frequencyin_obj_t* self) { self->frequency = 0; pcnt_counter_clear(self->unit); - timer_set_counter_value(TIMER_GROUP_0, TIMER_0, 0); + timer_set_counter_value(self->timer.group, self->timer.idx, 0); } uint16_t common_hal_frequencyio_frequencyin_get_capture_period(frequencyio_frequencyin_obj_t *self) { @@ -174,5 +189,5 @@ void common_hal_frequencyio_frequencyin_set_capture_period(frequencyio_frequency } self->capture_period = capture_period; common_hal_frequencyio_frequencyin_clear(self); - timer_set_alarm_value(TIMER_GROUP_0, TIMER_0, capture_period * 1000000); + timer_set_alarm_value(self->timer.group, self->timer.idx, capture_period * 1000000); } diff --git a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.h b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.h index ce3bf8f2f..cf9d2ae53 100644 --- a/ports/esp32s2/common-hal/frequencyio/FrequencyIn.h +++ b/ports/esp32s2/common-hal/frequencyio/FrequencyIn.h @@ -28,16 +28,17 @@ #define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_FREQUENCYIO_FREQUENCYIN_H #include "py/obj.h" -#include "driver/timer.h" #include "peripherals/pcnt.h" +#include "peripherals/timer.h" typedef struct { mp_obj_base_t base; pcnt_unit_t unit; + timer_index_t timer; intr_handle_t handle; uint8_t pin; uint8_t multiplier; - uint16_t frequency; + uint32_t frequency; uint16_t capture_period; } frequencyio_frequencyin_obj_t; -- cgit v1.2.3 From 83d790ad8f7838d70269d0f0add6de1199198227 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Wed, 18 Nov 2020 17:45:42 -0600 Subject: esp32s2: don't delete the event loop .. it seems to make the esp-idf grumpy. --- ports/esp32s2/common-hal/wifi/__init__.c | 1 - 1 file changed, 1 deletion(-) diff --git a/ports/esp32s2/common-hal/wifi/__init__.c b/ports/esp32s2/common-hal/wifi/__init__.c index 2eb3719b4..1b244dd2f 100644 --- a/ports/esp32s2/common-hal/wifi/__init__.c +++ b/ports/esp32s2/common-hal/wifi/__init__.c @@ -143,7 +143,6 @@ void wifi_reset(void) { radio->handler_instance_got_ip)); ESP_ERROR_CHECK(esp_wifi_deinit()); esp_netif_destroy(radio->netif); - ESP_ERROR_CHECK(esp_event_loop_delete_default()); radio->netif = NULL; } -- cgit v1.2.3 From f61f8f999b5eeb8a545f5cea13b30ac5b3aeb04a Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Wed, 18 Nov 2020 18:06:31 -0600 Subject: EPaperDisplay: add rotation property untested, because I don't want to mess my magtag demo up :) but it builds --- shared-bindings/displayio/EPaperDisplay.c | 24 ++++++++++++++++++++++++ shared-bindings/displayio/EPaperDisplay.h | 2 ++ shared-module/displayio/EPaperDisplay.c | 23 +++++++++++++++++++++++ 3 files changed, 49 insertions(+) diff --git a/shared-bindings/displayio/EPaperDisplay.c b/shared-bindings/displayio/EPaperDisplay.c index ebff64008..4f5c47aca 100644 --- a/shared-bindings/displayio/EPaperDisplay.c +++ b/shared-bindings/displayio/EPaperDisplay.c @@ -294,6 +294,29 @@ const mp_obj_property_t displayio_epaperdisplay_height_obj = { (mp_obj_t)&mp_const_none_obj}, }; +//| rotation: int +//| """The rotation of the display as an int in degrees.""" +//| +STATIC mp_obj_t displayio_epaperdisplay_obj_get_rotation(mp_obj_t self_in) { + displayio_epaperdisplay_obj_t *self = native_display(self_in); + return MP_OBJ_NEW_SMALL_INT(common_hal_displayio_epaperdisplay_get_rotation(self)); +} +MP_DEFINE_CONST_FUN_OBJ_1(displayio_epaperdisplay_get_rotation_obj, displayio_epaperdisplay_obj_get_rotation); +STATIC mp_obj_t displayio_epaperdisplay_obj_set_rotation(mp_obj_t self_in, mp_obj_t value) { + displayio_epaperdisplay_obj_t *self = native_display(self_in); + common_hal_displayio_epaperdisplay_set_rotation(self, mp_obj_get_int(value)); + return mp_const_none; +} +MP_DEFINE_CONST_FUN_OBJ_2(displayio_epaperdisplay_set_rotation_obj, displayio_epaperdisplay_obj_set_rotation); + + +const mp_obj_property_t displayio_epaperdisplay_rotation_obj = { + .base.type = &mp_type_property, + .proxy = {(mp_obj_t)&displayio_epaperdisplay_get_rotation_obj, + (mp_obj_t)&displayio_epaperdisplay_set_rotation_obj, + (mp_obj_t)&mp_const_none_obj}, +}; + //| bus: _DisplayBus //| """The bus being used by the display""" //| @@ -317,6 +340,7 @@ STATIC const mp_rom_map_elem_t displayio_epaperdisplay_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_width), MP_ROM_PTR(&displayio_epaperdisplay_width_obj) }, { MP_ROM_QSTR(MP_QSTR_height), MP_ROM_PTR(&displayio_epaperdisplay_height_obj) }, + { MP_ROM_QSTR(MP_QSTR_rotation), MP_ROM_PTR(&displayio_epaperdisplay_rotation_obj) }, { MP_ROM_QSTR(MP_QSTR_bus), MP_ROM_PTR(&displayio_epaperdisplay_bus_obj) }, { MP_ROM_QSTR(MP_QSTR_busy), MP_ROM_PTR(&displayio_epaperdisplay_busy_obj) }, { MP_ROM_QSTR(MP_QSTR_time_to_refresh), MP_ROM_PTR(&displayio_epaperdisplay_time_to_refresh_obj) }, diff --git a/shared-bindings/displayio/EPaperDisplay.h b/shared-bindings/displayio/EPaperDisplay.h index f785203a4..14d4f6aa9 100644 --- a/shared-bindings/displayio/EPaperDisplay.h +++ b/shared-bindings/displayio/EPaperDisplay.h @@ -56,6 +56,8 @@ bool common_hal_displayio_epaperdisplay_get_busy(displayio_epaperdisplay_obj_t* uint16_t common_hal_displayio_epaperdisplay_get_width(displayio_epaperdisplay_obj_t* self); uint16_t common_hal_displayio_epaperdisplay_get_height(displayio_epaperdisplay_obj_t* self); +uint16_t common_hal_displayio_epaperdisplay_get_rotation(displayio_epaperdisplay_obj_t* self); +void common_hal_displayio_epaperdisplay_set_rotation(displayio_epaperdisplay_obj_t* self, int rotation); mp_obj_t common_hal_displayio_epaperdisplay_get_bus(displayio_epaperdisplay_obj_t* self); diff --git a/shared-module/displayio/EPaperDisplay.c b/shared-module/displayio/EPaperDisplay.c index 1b285b4b1..3fb37ff21 100644 --- a/shared-module/displayio/EPaperDisplay.c +++ b/shared-module/displayio/EPaperDisplay.c @@ -198,6 +198,29 @@ mp_obj_t common_hal_displayio_epaperdisplay_get_bus(displayio_epaperdisplay_obj_ return self->core.bus; } +void common_hal_displayio_epaperdisplay_set_rotation(displayio_epaperdisplay_obj_t* self, int rotation){ + bool transposed = (self->core.rotation == 90 || self->core.rotation == 270); + bool will_transposed = (rotation == 90 || rotation == 270); + if(transposed != will_transposed) { + int tmp = self->core.width; + self->core.width = self->core.height; + self->core.height = tmp; + } + displayio_display_core_set_rotation(&self->core, rotation); + if (self == &displays[0].epaper_display) { + supervisor_stop_terminal(); + supervisor_start_terminal(self->core.width, self->core.height); + } + if (self->core.current_group != NULL) { + displayio_group_update_transform(self->core.current_group, &self->core.transform); + } +} + +uint16_t common_hal_displayio_epaperdisplay_get_rotation(displayio_epaperdisplay_obj_t* self){ + return self->core.rotation; +} + + bool displayio_epaperdisplay_refresh_area(displayio_epaperdisplay_obj_t* self, const displayio_area_t* area) { uint16_t buffer_size = 128; // In uint32_ts -- cgit v1.2.3 From 2463a6d6ac3fb53fa471c77bc585c8ef350d2b96 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Wed, 18 Nov 2020 16:28:21 -0800 Subject: Fix Palette grayscale for EInk. It needs to do the bitmasking that was only added to ColorConverter in #3611 --- shared-module/displayio/Palette.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/shared-module/displayio/Palette.c b/shared-module/displayio/Palette.c index facb1fa73..ba5ff665c 100644 --- a/shared-module/displayio/Palette.c +++ b/shared-module/displayio/Palette.c @@ -83,7 +83,8 @@ bool displayio_palette_get_color(displayio_palette_t *self, const _displayio_col uint8_t pixel_hue = self->colors[palette_index].hue; displayio_colorconverter_compute_tricolor(colorspace, pixel_hue, luma, color); } else if (colorspace->grayscale) { - *color = self->colors[palette_index].luma >> (8 - colorspace->depth); + size_t bitmask = (1 << colorspace->depth) - 1; + *color = (self->colors[palette_index].luma >> colorspace->grayscale_bit) & bitmask; } else { uint16_t packed = self->colors[palette_index].rgb565; if (colorspace->reverse_bytes_in_word) { -- cgit v1.2.3 From b98835a1d787f3d1e20eb29bf65ca8cf41d9abf0 Mon Sep 17 00:00:00 2001 From: hexthat Date: Wed, 18 Nov 2020 01:12:46 +0000 Subject: Translated using Weblate (Chinese (Pinyin)) Currently translated at 100.0% (848 of 848 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/zh_Latn/ --- locale/zh_Latn_pinyin.po | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index dd44aab93..e94ae8173 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-10 15:30+0530\n" -"PO-Revision-Date: 2020-11-15 16:28+0000\n" +"PO-Revision-Date: 2020-11-19 01:28+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -1012,7 +1012,7 @@ msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" -msgstr "" +msgstr "yóu yú nèi cún bù zú, chū shǐ huà shī bài" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" @@ -3661,7 +3661,7 @@ msgstr "xiàngliàng bìxū jùyǒu xiāngtóng de chángdù" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "watchdog not initialized" -msgstr "" +msgstr "wèi chū shǐ huà jiān shì qì" #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" -- cgit v1.2.3 From b9bec87f2930787cb1d2f3baea8284985a0062d5 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Wed, 18 Nov 2020 17:38:06 -0800 Subject: Update build board info. * Don't add full urls because they are too large. * Remove the unstable version when it starts with the current version. --- tools/build_board_info.py | 137 +++++++++++++++++++++++----------------------- 1 file changed, 70 insertions(+), 67 deletions(-) diff --git a/tools/build_board_info.py b/tools/build_board_info.py index f83282ea9..ce9d45fe2 100644 --- a/tools/build_board_info.py +++ b/tools/build_board_info.py @@ -19,20 +19,24 @@ import shared_bindings_matrix sys.path.append("adabot") import adabot.github_requests as github -SUPPORTED_PORTS = ["atmel-samd", "cxd56", "esp32s2", "litex", "mimxrt10xx", "nrf", "stm"] - -BIN = ('bin',) -UF2 = ('uf2',) -BIN_UF2 = ('bin', 'uf2') -HEX = ('hex',) -HEX_UF2 = ('hex', 'uf2') -SPK = ('spk',) -DFU = ('dfu',) -BIN_DFU = ('bin', 'dfu') - -# Example: -# https://downloads.circuitpython.org/bin/trinket_m0/en_US/adafruit-circuitpython-trinket_m0-en_US-5.0.0-rc.0.uf2 -DOWNLOAD_BASE_URL = "https://downloads.circuitpython.org/bin" +SUPPORTED_PORTS = [ + "atmel-samd", + "cxd56", + "esp32s2", + "litex", + "mimxrt10xx", + "nrf", + "stm", +] + +BIN = ("bin",) +UF2 = ("uf2",) +BIN_UF2 = ("bin", "uf2") +HEX = ("hex",) +HEX_UF2 = ("hex", "uf2") +SPK = ("spk",) +DFU = ("dfu",) +BIN_DFU = ("bin", "dfu") # Default extensions extension_by_port = { @@ -42,7 +46,7 @@ extension_by_port = { "cxd56": SPK, "mimxrt10xx": HEX_UF2, "litex": DFU, - "esp32s2": BIN_UF2 + "esp32s2": BIN_UF2, } # Per board overrides @@ -57,26 +61,28 @@ extension_by_board = { "feather_m0_rfm69": BIN_UF2, "feather_m0_rfm9x": BIN_UF2, "uchip": BIN_UF2, - # nRF52840 dev kits that may not have UF2 bootloaders, "makerdiary_nrf52840_mdk": HEX, "makerdiary_nrf52840_mdk_usb_dongle": HEX_UF2, "pca10056": BIN_UF2, "pca10059": BIN_UF2, "electronut_labs_blip": HEX, - # stm32 - "meowbit_v121": UF2 + "meowbit_v121": UF2, } aliases_by_board = { - "circuitplayground_express": ["circuitplayground_express_4h", "circuitplayground_express_digikey_pycon2019"], + "circuitplayground_express": [ + "circuitplayground_express_4h", + "circuitplayground_express_digikey_pycon2019", + ], "pybadge": ["edgebadge"], "pyportal": ["pyportal_pynt"], "gemma_m0": ["gemma_m0_pycon2018"], - "pewpew10": ["pewpew13"] + "pewpew10": ["pewpew13"], } + def get_languages(): languages = [] for f in os.scandir("../locale"): @@ -84,6 +90,7 @@ def get_languages(): languages.append(f.name[:-3]) return languages + def get_board_mapping(): boards = {} for port in SUPPORTED_PORTS: @@ -95,23 +102,30 @@ def get_board_mapping(): extensions = extension_by_port[port] extensions = extension_by_board.get(board_path.name, extensions) aliases = aliases_by_board.get(board_path.name, []) - boards[board_id] = {"port": port, - "extensions": extensions, - "download_count": 0, - "aliases": aliases} + boards[board_id] = { + "port": port, + "extensions": extensions, + "download_count": 0, + "aliases": aliases, + } for alias in aliases: - boards[alias] = {"port": port, - "extensions": extensions, - "download_count": 0, - "alias": True, - "aliases": []} + boards[alias] = { + "port": port, + "extensions": extensions, + "download_count": 0, + "alias": True, + "aliases": [], + } return boards + def get_version_info(): version = None sha = git("rev-parse", "--short", "HEAD").stdout.decode("utf-8") try: - version = git("describe", "--tags", "--exact-match").stdout.decode("utf-8").strip() + version = ( + git("describe", "--tags", "--exact-match").stdout.decode("utf-8").strip() + ) except sh.ErrorReturnCode_128: # No exact match pass @@ -120,10 +134,11 @@ def get_version_info(): sha = os.environ["GITHUB_SHA"] if not version: - version="{}-{}".format(date.today().strftime("%Y%m%d"), sha[:7]) + version = "{}-{}".format(date.today().strftime("%Y%m%d"), sha[:7]) return sha, version + def get_current_info(): response = github.get("/repos/adafruit/circuitpython-org/git/refs/heads/master") if not response.ok: @@ -131,7 +146,9 @@ def get_current_info(): raise RuntimeError("cannot get master sha") commit_sha = response.json()["object"]["sha"] - response = github.get("/repos/adafruit/circuitpython-org/contents/_data/files.json?ref=" + commit_sha) + response = github.get( + "/repos/adafruit/circuitpython-org/contents/_data/files.json?ref=" + commit_sha + ) if not response.ok: print(response.text) raise RuntimeError("cannot get previous files.json") @@ -145,6 +162,7 @@ def get_current_info(): current_info[info["id"]] = info return git_info, current_info + def create_pr(changes, updated, git_info, user): commit_sha, original_blob_sha = git_info branch_name = "new_release_" + changes["new_release"] @@ -158,7 +176,7 @@ def create_pr(changes, updated, git_info, user): updated_list.append(info) updated = json.dumps(updated_list, sort_keys=True, indent=1).encode("utf-8") + b"\n" - #print(updated.decode("utf-8")) + # print(updated.decode("utf-8")) pr_title = "Automated website update for release {}".format(changes["new_release"]) boards = "" if changes["new_boards"]: @@ -167,16 +185,13 @@ def create_pr(changes, updated, git_info, user): if changes["new_languages"]: languages = "New languages:\n* " + "\n* ".join(changes["new_languages"]) message = "Automated website update for release {} by Blinka.\n\n{}\n\n{}\n".format( - changes["new_release"], - boards, - languages + changes["new_release"], boards, languages ) - create_branch = { - "ref": "refs/heads/" + branch_name, - "sha": commit_sha - } - response = github.post("/repos/{}/circuitpython-org/git/refs".format(user), json=create_branch) + create_branch = {"ref": "refs/heads/" + branch_name, "sha": commit_sha} + response = github.post( + "/repos/{}/circuitpython-org/git/refs".format(user), json=create_branch + ) if not response.ok and response.json()["message"] != "Reference already exists": print("unable to create branch") print(response.text) @@ -186,10 +201,13 @@ def create_pr(changes, updated, git_info, user): "message": message, "content": base64.b64encode(updated).decode("utf-8"), "sha": original_blob_sha, - "branch": branch_name + "branch": branch_name, } - response = github.put("/repos/{}/circuitpython-org/contents/_data/files.json".format(user), json=update_file) + response = github.put( + "/repos/{}/circuitpython-org/contents/_data/files.json".format(user), + json=update_file, + ) if not response.ok: print("unable to post new file") print(response.text) @@ -199,7 +217,7 @@ def create_pr(changes, updated, git_info, user): "head": user + ":" + branch_name, "base": "master", "body": message, - "maintainer_can_modify": True + "maintainer_can_modify": True, } response = github.post("/repos/adafruit/circuitpython-org/pulls", json=pr_info) if not response.ok: @@ -220,17 +238,14 @@ def print_active_user(): print("Not logged in") return None + def generate_download_info(): boards = {} errors = [] new_tag = os.environ["RELEASE_TAG"] - changes = { - "new_release": new_tag, - "new_boards": [], - "new_languages": [] - } + changes = {"new_release": new_tag, "new_boards": [], "new_languages": []} user = print_active_user() @@ -254,8 +269,9 @@ def generate_download_info(): info = current_info[board] for version in info["versions"]: previous_releases.add(version["version"]) - previous_languages.update(version["files"].keys()) - if version["stable"] == new_stable: + if version["stable"] == new_stable or ( + new_stable and version["version"].startswith(this_version) + ): info["versions"].remove(version) board_mapping = get_board_mapping() @@ -272,29 +288,15 @@ def generate_download_info(): alias_info = board_mapping[alias] if alias not in current_info: changes["new_boards"].append(alias) - current_info[alias] = {"downloads": 0, - "versions": []} + current_info[alias] = {"downloads": 0, "versions": []} new_version = { "stable": new_stable, "version": new_tag, "modules": support_matrix.get(alias, "[]"), - "files": {}, "languages": languages, - "extensions": board_info["extensions"] + "extensions": board_info["extensions"], } - for language in languages: - files = [] - new_version["files"][language] = files - for extension in board_info["extensions"]: - files.append( - "{base_url}/{alias}/{language}/adafruit-circuitpython-{alias}-{language}-{tag}.{extension}" - .format( - base_url=DOWNLOAD_BASE_URL, - tag=new_tag, - alias=alias, - language=language, - extension=extension)) current_info[alias]["downloads"] = alias_info["download_count"] current_info[alias]["versions"].append(new_version) @@ -305,6 +307,7 @@ def generate_download_info(): else: print("No new release to update") + if __name__ == "__main__": if "RELEASE_TAG" in os.environ and os.environ["RELEASE_TAG"]: generate_download_info() -- cgit v1.2.3 From 9a642fc0490c22b60460bcca8dec3b0b93344d81 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Wed, 18 Nov 2020 20:37:26 -0600 Subject: samd21: Enable terse error reporting on resource constrained chip family This reclaims over 1kB of flash space by simplifying certain exception messages. e.g., it will no longer display the requested/actual length when a fixed list/tuple of N items is needed: if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { mp_raise_ValueError(translate("tuple/list has wrong length")); } else { mp_raise_ValueError_varg(translate("requested length %d but object has length %d"), (int)len, (int)seq_len); Other chip families including samd51 keep their current error reporting capabilities. --- ports/atmel-samd/mpconfigport.h | 1 + py/circuitpy_mpconfig.h | 2 ++ 2 files changed, 3 insertions(+) diff --git a/ports/atmel-samd/mpconfigport.h b/ports/atmel-samd/mpconfigport.h index ed10da9b9..3069def33 100644 --- a/ports/atmel-samd/mpconfigport.h +++ b/ports/atmel-samd/mpconfigport.h @@ -42,6 +42,7 @@ #define CIRCUITPY_MCU_FAMILY samd21 #define MICROPY_PY_SYS_PLATFORM "Atmel SAMD21" #define SPI_FLASH_MAX_BAUDRATE 8000000 +#define MICROPY_ERROR_REPORTING (MICROPY_ERROR_REPORTING_TERSE) #define MICROPY_PY_BUILTINS_NOTIMPLEMENTED (0) #define MICROPY_PY_FUNCTION_ATTRS (0) // MICROPY_PY_UJSON depends on MICROPY_PY_IO diff --git a/py/circuitpy_mpconfig.h b/py/circuitpy_mpconfig.h index 85e152670..4c2e33be0 100644 --- a/py/circuitpy_mpconfig.h +++ b/py/circuitpy_mpconfig.h @@ -64,7 +64,9 @@ #define MICROPY_ENABLE_FINALISER (1) #define MICROPY_ENABLE_GC (1) #define MICROPY_ENABLE_SOURCE_LINE (1) +#ifndef MICROPY_ERROR_REPORTING #define MICROPY_ERROR_REPORTING (MICROPY_ERROR_REPORTING_NORMAL) +#endif #define MICROPY_FLOAT_HIGH_QUALITY_HASH (0) #define MICROPY_FLOAT_IMPL (MICROPY_FLOAT_IMPL_FLOAT) #define MICROPY_GC_ALLOC_THRESHOLD (0) -- cgit v1.2.3 From 76d4824728c6dc99d9bfed48a41933fa48c8bbf7 Mon Sep 17 00:00:00 2001 From: Kamil Tomaszewski Date: Thu, 19 Nov 2020 15:04:52 +0100 Subject: spresense: Return fixed stack --- ports/cxd56/supervisor/port.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/ports/cxd56/supervisor/port.c b/ports/cxd56/supervisor/port.c index 92d335cd5..086c2d198 100644 --- a/ports/cxd56/supervisor/port.c +++ b/ports/cxd56/supervisor/port.c @@ -98,8 +98,12 @@ void reset_to_bootloader(void) { } } +supervisor_allocation _fixed_stack; + supervisor_allocation* port_fixed_stack(void) { - return NULL; + _fixed_stack.ptr = port_stack_get_limit(); + _fixed_stack.length = (port_stack_get_top() - port_stack_get_limit()) * sizeof(uint32_t); + return &_fixed_stack; } uint32_t *port_stack_get_limit(void) { -- cgit v1.2.3 From dd108b755dc2bb886df14c9fcfcd4f09be61f2d4 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 19 Nov 2020 11:36:02 -0600 Subject: esp32s2: initialize event loop ane netif only once deinitting these seems to cause problems. --- ports/esp32s2/common-hal/wifi/__init__.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/ports/esp32s2/common-hal/wifi/__init__.c b/ports/esp32s2/common-hal/wifi/__init__.c index 1b244dd2f..f53e68fc2 100644 --- a/ports/esp32s2/common-hal/wifi/__init__.c +++ b/ports/esp32s2/common-hal/wifi/__init__.c @@ -88,14 +88,17 @@ static void event_handler(void* arg, esp_event_base_t event_base, } } -static bool wifi_inited; +static bool wifi_inited, wifi_ever_inited; void common_hal_wifi_init(void) { wifi_inited = true; common_hal_wifi_radio_obj.base.type = &wifi_radio_type; - ESP_ERROR_CHECK(esp_netif_init()); - ESP_ERROR_CHECK(esp_event_loop_create_default()); + if (!wifi_ever_inited) { + ESP_ERROR_CHECK(esp_netif_init()); + ESP_ERROR_CHECK(esp_event_loop_create_default()); + } + wifi_ever_inited = true; wifi_radio_obj_t* self = &common_hal_wifi_radio_obj; self->netif = esp_netif_create_default_wifi_sta(); -- cgit v1.2.3 From 331aa6e59fd36b52afb4119068d0baa99c85ea3c Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 19 Nov 2020 11:43:18 -0600 Subject: displayio: When the display is tall, move blinka above the text This makes a more useful display on the portrait magtag, allowing 21 characters across instead of just 18. There are 20 full rows of text, instead of 21. The total number of characters increases slightly from 378 to 420. For comparison, the Commodore VIC 20 had 22 rows of 23 characters for a total of 506 characters. :-P --- supervisor/shared/display.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/supervisor/shared/display.c b/supervisor/shared/display.c index afb3f3a9a..a9ae25884 100644 --- a/supervisor/shared/display.c +++ b/supervisor/shared/display.c @@ -60,18 +60,21 @@ void supervisor_start_terminal(uint16_t width_px, uint16_t height_px) { #if CIRCUITPY_TERMINALIO displayio_tilegrid_t* grid = &supervisor_terminal_text_grid; - uint16_t width_in_tiles = (width_px - blinka_bitmap.width) / grid->tile_width; + bool tall = height_px > width_px; + uint16_t terminal_width_px = tall ? width_px : width_px - blinka_bitmap.width; + uint16_t terminal_height_px = tall ? height_px - blinka_bitmap.height : height_px ; + uint16_t width_in_tiles = terminal_width_px / grid->tile_width; // determine scale based on h if (width_in_tiles < 80) { scale = 1; } - width_in_tiles = (width_px - blinka_bitmap.width * scale) / (grid->tile_width * scale); + width_in_tiles = terminal_width_px / (grid->tile_width * scale); if (width_in_tiles < 1) { width_in_tiles = 1; } - uint16_t height_in_tiles = height_px / (grid->tile_height * scale); - uint16_t remaining_pixels = height_px % (grid->tile_height * scale); + uint16_t height_in_tiles = terminal_height_px / (grid->tile_height * scale); + uint16_t remaining_pixels = tall ? 0 : terminal_height_px % (grid->tile_height * scale); if (height_in_tiles < 1 || remaining_pixels > 0) { height_in_tiles += 1; } @@ -91,7 +94,8 @@ void supervisor_start_terminal(uint16_t width_px, uint16_t height_px) { if (tiles == NULL) { return; } - grid->y = 0; + grid->y = tall ? blinka_bitmap.height : 0; + grid->x = tall ? 0 : blinka_bitmap.width; grid->top_left_y = 0; if (remaining_pixels > 0) { grid->y -= (grid->tile_height - remaining_pixels); -- cgit v1.2.3 From 0556f9f851f0bd5fdb392b925af1076affbf5e00 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 19 Nov 2020 15:12:56 -0600 Subject: Revert "samd21: Enable terse error reporting on resource constrained chip family" This reverts commit 9a642fc0490c22b60460bcca8dec3b0b93344d81. --- ports/atmel-samd/mpconfigport.h | 1 - py/circuitpy_mpconfig.h | 2 -- 2 files changed, 3 deletions(-) diff --git a/ports/atmel-samd/mpconfigport.h b/ports/atmel-samd/mpconfigport.h index 3069def33..ed10da9b9 100644 --- a/ports/atmel-samd/mpconfigport.h +++ b/ports/atmel-samd/mpconfigport.h @@ -42,7 +42,6 @@ #define CIRCUITPY_MCU_FAMILY samd21 #define MICROPY_PY_SYS_PLATFORM "Atmel SAMD21" #define SPI_FLASH_MAX_BAUDRATE 8000000 -#define MICROPY_ERROR_REPORTING (MICROPY_ERROR_REPORTING_TERSE) #define MICROPY_PY_BUILTINS_NOTIMPLEMENTED (0) #define MICROPY_PY_FUNCTION_ATTRS (0) // MICROPY_PY_UJSON depends on MICROPY_PY_IO diff --git a/py/circuitpy_mpconfig.h b/py/circuitpy_mpconfig.h index 4c2e33be0..85e152670 100644 --- a/py/circuitpy_mpconfig.h +++ b/py/circuitpy_mpconfig.h @@ -64,9 +64,7 @@ #define MICROPY_ENABLE_FINALISER (1) #define MICROPY_ENABLE_GC (1) #define MICROPY_ENABLE_SOURCE_LINE (1) -#ifndef MICROPY_ERROR_REPORTING #define MICROPY_ERROR_REPORTING (MICROPY_ERROR_REPORTING_NORMAL) -#endif #define MICROPY_FLOAT_HIGH_QUALITY_HASH (0) #define MICROPY_FLOAT_IMPL (MICROPY_FLOAT_IMPL_FLOAT) #define MICROPY_GC_ALLOC_THRESHOLD (0) -- cgit v1.2.3 From d5f6748d1bea832c6f483ca8b0095e776eaca2df Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 19 Nov 2020 16:12:53 -0600 Subject: Use mp_raise instead of nlr_raise(new_exception) where possible This saves a bit of code space --- extmod/machine_mem.c | 2 +- extmod/moduheapq.c | 2 +- extmod/vfs_posix_file.c | 2 +- py/bc.c | 4 ++-- py/objstr.c | 6 ++---- 5 files changed, 7 insertions(+), 9 deletions(-) diff --git a/extmod/machine_mem.c b/extmod/machine_mem.c index 6c6e11063..8944c3a66 100644 --- a/extmod/machine_mem.c +++ b/extmod/machine_mem.c @@ -21,7 +21,7 @@ STATIC uintptr_t machine_mem_get_addr(mp_obj_t addr_o, uint align) { uintptr_t addr = mp_obj_int_get_truncated(addr_o); if ((addr & (align - 1)) != 0) { - nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError, translate("address %08x is not aligned to %d bytes"), addr, align)); + mp_raise_ValueError_varg(translate("address %08x is not aligned to %d bytes"), addr, align); } return addr; } diff --git a/extmod/moduheapq.c b/extmod/moduheapq.c index bc4b97ff5..50fe6c051 100644 --- a/extmod/moduheapq.c +++ b/extmod/moduheapq.c @@ -62,7 +62,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(mod_uheapq_heappush_obj, mod_uheapq_heappush); STATIC mp_obj_t mod_uheapq_heappop(mp_obj_t heap_in) { mp_obj_list_t *heap = get_heap(heap_in); if (heap->len == 0) { - nlr_raise(mp_obj_new_exception_msg(&mp_type_IndexError, translate("empty heap"))); + mp_raise_IndexError(translate("empty heap")); } mp_obj_t item = heap->items[0]; heap->len -= 1; diff --git a/extmod/vfs_posix_file.c b/extmod/vfs_posix_file.c index 3f887785e..593b8d6a2 100644 --- a/extmod/vfs_posix_file.c +++ b/extmod/vfs_posix_file.c @@ -24,7 +24,7 @@ typedef struct _mp_obj_vfs_posix_file_t { #ifdef MICROPY_CPYTHON_COMPAT STATIC void check_fd_is_open(const mp_obj_vfs_posix_file_t *o) { if (o->fd < 0) { - nlr_raise(mp_obj_new_exception_msg(&mp_type_ValueError, translate("I/O operation on closed file"))); + mp_raise_ValueError(translate("I/O operation on closed file")); } } #else diff --git a/py/bc.c b/py/bc.c index 640671338..01131cb4c 100644 --- a/py/bc.c +++ b/py/bc.c @@ -214,8 +214,8 @@ void mp_setup_code_state(mp_code_state_t *code_state, size_t n_args, size_t n_kw #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("unexpected keyword argument")); #else - nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError, - translate("unexpected keyword argument '%q'"), MP_OBJ_QSTR_VALUE(wanted_arg_name))); + mp_raise_TypeError_varg( + translate("unexpected keyword argument '%q'"), MP_OBJ_QSTR_VALUE(wanted_arg_name)); #endif } mp_obj_dict_store(dict, kwargs[2 * i], kwargs[2 * i + 1]); diff --git a/py/objstr.c b/py/objstr.c index edb562df2..6a03f5fc3 100644 --- a/py/objstr.c +++ b/py/objstr.c @@ -2134,10 +2134,8 @@ STATIC NORETURN void bad_implicit_conversion(mp_obj_t self_in) { mp_raise_TypeError(translate("can't convert to str implicitly")); } else { const qstr src_name = mp_obj_get_type_qstr(self_in); - nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_TypeError, - translate("can't convert '%q' object to %q implicitly"), - src_name, src_name == MP_QSTR_str ? MP_QSTR_bytes : MP_QSTR_str)); - } + mp_raise_TypeError_varg(translate("can't convert '%q' object to %q implicitly"), + src_name, src_name == MP_QSTR_str ? MP_QSTR_bytes : MP_QSTR_str); } // use this if you will anyway convert the string to a qstr -- cgit v1.2.3 From c06fc8e02dc7c17e827e3fe736dc7226d7819452 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 19 Nov 2020 16:13:54 -0600 Subject: Introduce, use mp_raise_arg1 This raises an exception with a given object value. Saves a bit of code size. --- extmod/modure.c | 6 +++--- extmod/moduzlib.c | 2 +- ports/unix/modjni.c | 4 ++-- py/modsys.c | 2 +- py/objdict.c | 6 +++--- py/objset.c | 2 +- py/objstr.c | 2 +- py/pystack.c | 4 ++-- py/runtime.c | 8 ++++++-- py/runtime.h | 1 + 10 files changed, 21 insertions(+), 16 deletions(-) diff --git a/extmod/modure.c b/extmod/modure.c index a20f3ee42..bb54bc732 100644 --- a/extmod/modure.c +++ b/extmod/modure.c @@ -43,7 +43,7 @@ STATIC mp_obj_t match_group(mp_obj_t self_in, mp_obj_t no_in) { mp_obj_match_t *self = MP_OBJ_TO_PTR(self_in); mp_int_t no = mp_obj_get_int(no_in); if (no < 0 || no >= self->num_matches) { - nlr_raise(mp_obj_new_exception_arg1(&mp_type_IndexError, no_in)); + mp_raise_arg1(&mp_type_IndexError, no_in); } const char *start = self->caps[no * 2]; @@ -82,7 +82,7 @@ STATIC void match_span_helper(size_t n_args, const mp_obj_t *args, mp_obj_t span if (n_args == 2) { no = mp_obj_get_int(args[1]); if (no < 0 || no >= self->num_matches) { - nlr_raise(mp_obj_new_exception_arg1(&mp_type_IndexError, args[1])); + mp_raise_arg1(&mp_type_IndexError, args[1]); } } @@ -326,7 +326,7 @@ STATIC mp_obj_t re_sub_helper(mp_obj_t self_in, size_t n_args, const mp_obj_t *a } if (match_no >= (unsigned int)match->num_matches) { - nlr_raise(mp_obj_new_exception_arg1(&mp_type_IndexError, MP_OBJ_NEW_SMALL_INT(match_no))); + mp_raise_arg1(&mp_type_IndexError, MP_OBJ_NEW_SMALL_INT(match_no)); } const char *start_match = match->caps[match_no * 2]; diff --git a/extmod/moduzlib.c b/extmod/moduzlib.c index 8422e7598..b344f9642 100644 --- a/extmod/moduzlib.c +++ b/extmod/moduzlib.c @@ -179,7 +179,7 @@ STATIC mp_obj_t mod_uzlib_decompress(size_t n_args, const mp_obj_t *args) { return res; error: - nlr_raise(mp_obj_new_exception_arg1(&mp_type_ValueError, MP_OBJ_NEW_SMALL_INT(st))); + mp_raise_arg1(&mp_type_ValueError, MP_OBJ_NEW_SMALL_INT(st)); } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(mod_uzlib_decompress_obj, 1, 3, mod_uzlib_decompress); diff --git a/ports/unix/modjni.c b/ports/unix/modjni.c index 8ec5ae54d..82d1ccd55 100644 --- a/ports/unix/modjni.c +++ b/ports/unix/modjni.c @@ -102,9 +102,9 @@ STATIC void check_exception(void) { mp_obj_t py_e = new_jobject(exc); JJ1(ExceptionClear); if (JJ(IsInstanceOf, exc, IndexException_class)) { - nlr_raise(mp_obj_new_exception_arg1(&mp_type_IndexError, py_e)); + mp_raise_arg1(&mp_type_IndexError, py_e); } - nlr_raise(mp_obj_new_exception_arg1(&mp_type_Exception, py_e)); + mp_raise_arg1(&mp_type_Exception, py_e); } } diff --git a/py/modsys.c b/py/modsys.c index a1d2cf831..31f28a36f 100644 --- a/py/modsys.c +++ b/py/modsys.c @@ -96,7 +96,7 @@ STATIC mp_obj_t mp_sys_exit(size_t n_args, const mp_obj_t *args) { if (n_args == 0) { exc = mp_obj_new_exception(&mp_type_SystemExit); } else { - exc = mp_obj_new_exception_arg1(&mp_type_SystemExit, args[0]); + mp_raise_arg1(&mp_type_SystemExit, args[0]); } nlr_raise(exc); } diff --git a/py/objdict.c b/py/objdict.c index 63fd86f35..098aec5d2 100644 --- a/py/objdict.c +++ b/py/objdict.c @@ -169,7 +169,7 @@ mp_obj_t mp_obj_dict_get(mp_obj_t self_in, mp_obj_t index) { mp_obj_dict_t *self = MP_OBJ_TO_PTR(self_in); mp_map_elem_t *elem = mp_map_lookup(&self->map, index, MP_MAP_LOOKUP); if (elem == NULL) { - nlr_raise(mp_obj_new_exception_arg1(&mp_type_KeyError, index)); + mp_raise_arg1(&mp_type_KeyError, index); } else { return elem->value; } @@ -185,7 +185,7 @@ STATIC mp_obj_t dict_subscr(mp_obj_t self_in, mp_obj_t index, mp_obj_t value) { mp_obj_dict_t *self = MP_OBJ_TO_PTR(self_in); mp_map_elem_t *elem = mp_map_lookup(&self->map, index, MP_MAP_LOOKUP); if (elem == NULL) { - nlr_raise(mp_obj_new_exception_arg1(&mp_type_KeyError, index)); + mp_raise_arg1(&mp_type_KeyError, index); } else { return elem->value; } @@ -272,7 +272,7 @@ STATIC mp_obj_t dict_get_helper(size_t n_args, const mp_obj_t *args, mp_map_look if (elem == NULL || elem->value == MP_OBJ_NULL) { if (n_args == 2) { if (lookup_kind == MP_MAP_LOOKUP_REMOVE_IF_FOUND) { - nlr_raise(mp_obj_new_exception_arg1(&mp_type_KeyError, args[1])); + mp_raise_arg1(&mp_type_KeyError, args[1]); } else { value = mp_const_none; } diff --git a/py/objset.c b/py/objset.c index 45b5c1260..c5d54aede 100644 --- a/py/objset.c +++ b/py/objset.c @@ -378,7 +378,7 @@ STATIC mp_obj_t set_remove(mp_obj_t self_in, mp_obj_t item) { check_set(self_in); mp_obj_set_t *self = MP_OBJ_TO_PTR(self_in); if (mp_set_lookup(&self->set, item, MP_MAP_LOOKUP_REMOVE_IF_FOUND) == MP_OBJ_NULL) { - nlr_raise(mp_obj_new_exception_arg1(&mp_type_KeyError, item)); + mp_raise_arg1(&mp_type_KeyError, item); } return mp_const_none; } diff --git a/py/objstr.c b/py/objstr.c index 6a03f5fc3..34ccab86d 100644 --- a/py/objstr.c +++ b/py/objstr.c @@ -1087,7 +1087,7 @@ STATIC vstr_t mp_obj_str_format_helper(const char *str, const char *top, int *ar field_name = lookup; mp_map_elem_t *key_elem = mp_map_lookup(kwargs, field_q, MP_MAP_LOOKUP); if (key_elem == NULL) { - nlr_raise(mp_obj_new_exception_arg1(&mp_type_KeyError, field_q)); + mp_raise_arg1(&mp_type_KeyError, field_q); } arg = key_elem->value; } diff --git a/py/pystack.c b/py/pystack.c index f79ea9210..0def75b10 100644 --- a/py/pystack.c +++ b/py/pystack.c @@ -43,8 +43,8 @@ void *mp_pystack_alloc(size_t n_bytes) { #endif if (MP_STATE_THREAD(pystack_cur) + n_bytes > MP_STATE_THREAD(pystack_end)) { // out of memory in the pystack - nlr_raise(mp_obj_new_exception_arg1(&mp_type_RuntimeError, - MP_OBJ_NEW_QSTR(MP_QSTR_pystack_space_exhausted))); + mp_raise_arg1(&mp_type_RuntimeError, + MP_OBJ_NEW_QSTR(MP_QSTR_pystack_space_exhausted)); } void *ptr = MP_STATE_THREAD(pystack_cur); MP_STATE_THREAD(pystack_cur) += n_bytes; diff --git a/py/runtime.c b/py/runtime.c index e63e2337d..3745e16e3 100644 --- a/py/runtime.c +++ b/py/runtime.c @@ -1514,6 +1514,10 @@ NORETURN void m_malloc_fail(size_t num_bytes) { translate("memory allocation failed, allocating %u bytes"), (uint)num_bytes); } +NORETURN void mp_raise_arg1(const mp_obj_type_t *exc_type, mp_obj_t arg) { + nlr_raise(mp_obj_new_exception_arg1(exc_type, arg)); +} + NORETURN void mp_raise_msg(const mp_obj_type_t *exc_type, const compressed_string_t *msg) { if (msg == NULL) { nlr_raise(mp_obj_new_exception(exc_type)); @@ -1580,7 +1584,7 @@ NORETURN void mp_raise_TypeError_varg(const compressed_string_t *fmt, ...) { } NORETURN void mp_raise_OSError(int errno_) { - nlr_raise(mp_obj_new_exception_arg1(&mp_type_OSError, MP_OBJ_NEW_SMALL_INT(errno_))); + mp_raise_arg1(&mp_type_OSError, MP_OBJ_NEW_SMALL_INT(errno_)); } NORETURN void mp_raise_OSError_msg(const compressed_string_t *msg) { @@ -1607,7 +1611,7 @@ NORETURN void mp_raise_ConnectionError(const compressed_string_t *msg) { } NORETURN void mp_raise_BrokenPipeError(void) { - nlr_raise(mp_obj_new_exception_arg1(&mp_type_BrokenPipeError, MP_OBJ_NEW_SMALL_INT(MP_EPIPE))); + mp_raise_arg1(&mp_type_BrokenPipeError, MP_OBJ_NEW_SMALL_INT(MP_EPIPE)); } NORETURN void mp_raise_NotImplementedError(const compressed_string_t *msg) { diff --git a/py/runtime.h b/py/runtime.h index ad7d0feab..5e8fda35c 100644 --- a/py/runtime.h +++ b/py/runtime.h @@ -150,6 +150,7 @@ mp_obj_t mp_import_name(qstr name, mp_obj_t fromlist, mp_obj_t level); mp_obj_t mp_import_from(mp_obj_t module, qstr name); void mp_import_all(mp_obj_t module); +NORETURN void mp_raise_arg1(const mp_obj_type_t *exc_type, mp_obj_t arg); NORETURN void mp_raise_msg(const mp_obj_type_t *exc_type, const compressed_string_t *msg); NORETURN void mp_raise_msg_varg(const mp_obj_type_t *exc_type, const compressed_string_t *fmt, ...); NORETURN void mp_raise_msg_vlist(const mp_obj_type_t *exc_type, const compressed_string_t *fmt, va_list argptr); -- cgit v1.2.3 From b2b8520880e9d458adbd279a34b831f8d6b68d40 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 19 Nov 2020 16:18:52 -0600 Subject: Always use preprocessor for MICROPY_ERROR_REPORTING This ensures that only the translate("") alternative that will be used is seen after preprocessing. Improves the quality of the Huffman encoding and reduces binary size slightly. Also makes one "enhanced" error message only occur when ERROR_REPORTING_DETAILED: Instead of the word-for-word python3 error message "Type object has no attribute '%q'", the message will be "'type' object has no attribute '%q'". Also reduces binary size. (that's rolled into this commit as it was right next to a change to use the preprocessor for MICROPY_ERROR_REPORTING) Note that the odd semicolon after "value_error:" in parsenum.c is necessary due to a detail of the C grammar, in which a declaration cannot follow a label directly. --- py/argcheck.c | 18 ++++----- py/builtinimport.c | 12 +++--- py/compile.c | 12 +++--- py/modbuiltins.c | 6 +-- py/modsys.c | 4 +- py/obj.c | 66 ++++++++++++++++----------------- py/objnamedtuple.c | 20 +++++----- py/objstr.c | 105 +++++++++++++++++++++++++++-------------------------- py/objtype.c | 24 ++++++------ py/parsenum.c | 10 ++--- py/runtime.c | 76 ++++++++++++++++++++------------------ 11 files changed, 178 insertions(+), 175 deletions(-) diff --git a/py/argcheck.c b/py/argcheck.c index 9341c02a6..af5c81bf3 100644 --- a/py/argcheck.c +++ b/py/argcheck.c @@ -99,12 +99,12 @@ void mp_arg_parse_all(size_t n_pos, const mp_obj_t *pos, mp_map_t *kws, size_t n mp_map_elem_t *kw = mp_map_lookup(kws, MP_OBJ_NEW_QSTR(allowed[i].qst), MP_MAP_LOOKUP); if (kw == NULL) { if (allowed[i].flags & MP_ARG_REQUIRED) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_arg_error_terse_mismatch(); - } else { + #else mp_raise_TypeError_varg( translate("'%q' argument required"), allowed[i].qst); - } + #endif } out_vals[i] = allowed[i].defval; continue; @@ -124,20 +124,20 @@ void mp_arg_parse_all(size_t n_pos, const mp_obj_t *pos, mp_map_t *kws, size_t n } if (pos_found < n_pos) { extra_positional: - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_arg_error_terse_mismatch(); - } else { + #else // TODO better error message mp_raise_TypeError(translate("extra positional arguments given")); - } + #endif } if (kws_found < kws->used) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_arg_error_terse_mismatch(); - } else { + #else // TODO better error message mp_raise_TypeError(translate("extra keyword arguments given")); - } + #endif } } diff --git a/py/builtinimport.c b/py/builtinimport.c index 47ffab519..c4768cc77 100644 --- a/py/builtinimport.c +++ b/py/builtinimport.c @@ -426,12 +426,12 @@ mp_obj_t mp_builtin___import__(size_t n_args, const mp_obj_t *args) { mp_module_call_init(mod_name, module_obj); } else { // couldn't find the file, so fail - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_ImportError(translate("module not found")); - } else { + #else mp_raise_msg_varg(&mp_type_ImportError, translate("no module named '%q'"), mod_name); - } + #endif } } else { // found the file, so get the module @@ -538,12 +538,12 @@ mp_obj_t mp_builtin___import__(size_t n_args, const mp_obj_t *args) { #endif // Couldn't find the module, so fail - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_msg(&mp_type_ImportError, translate("module not found")); - } else { + #else nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ImportError, translate("no module named '%q'"), module_name_qstr)); - } + #endif } #endif // MICROPY_ENABLE_EXTERNAL_IMPORT diff --git a/py/compile.c b/py/compile.c index 04bcf5bc1..b4d81ed44 100644 --- a/py/compile.c +++ b/py/compile.c @@ -2486,21 +2486,21 @@ STATIC void compile_atom_brace(compiler_t *comp, mp_parse_node_struct_t *pns) { compile_node(comp, pn_i); if (is_dict) { if (!is_key_value) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE compile_syntax_error(comp, (mp_parse_node_t)pns, translate("invalid syntax")); - } else { + #else compile_syntax_error(comp, (mp_parse_node_t)pns, translate("expecting key:value for dict")); - } + #endif return; } EMIT(store_map); } else { if (is_key_value) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE compile_syntax_error(comp, (mp_parse_node_t)pns, translate("invalid syntax")); - } else { + #else compile_syntax_error(comp, (mp_parse_node_t)pns, translate("expecting just a value for set")); - } + #endif return; } } diff --git a/py/modbuiltins.c b/py/modbuiltins.c index 41e1d4e48..fe3c366ee 100644 --- a/py/modbuiltins.c +++ b/py/modbuiltins.c @@ -346,12 +346,12 @@ STATIC mp_obj_t mp_builtin_ord(mp_obj_t o_in) { } } - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("ord expects a character")); - } else { + #else mp_raise_TypeError_varg( translate("ord() expected a character, but string of length %d found"), (int)len); - } + #endif } MP_DEFINE_CONST_FUN_OBJ_1(mp_builtin_ord_obj, mp_builtin_ord); diff --git a/py/modsys.c b/py/modsys.c index 31f28a36f..81628683d 100644 --- a/py/modsys.c +++ b/py/modsys.c @@ -92,13 +92,11 @@ STATIC const MP_DEFINE_STR_OBJ(platform_obj, MICROPY_PY_SYS_PLATFORM); // exit([retval]): raise SystemExit, with optional argument given to the exception STATIC mp_obj_t mp_sys_exit(size_t n_args, const mp_obj_t *args) { - mp_obj_t exc; if (n_args == 0) { - exc = mp_obj_new_exception(&mp_type_SystemExit); + nlr_raise(mp_obj_new_exception(&mp_type_SystemExit)); } else { mp_raise_arg1(&mp_type_SystemExit, args[0]); } - nlr_raise(exc); } MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(mp_sys_exit_obj, 0, 1, mp_sys_exit); diff --git a/py/obj.c b/py/obj.c index 315e816e0..d8e34746c 100644 --- a/py/obj.c +++ b/py/obj.c @@ -262,12 +262,12 @@ mp_int_t mp_obj_get_int(mp_const_obj_t arg) { } else if (MP_OBJ_IS_TYPE(arg, &mp_type_int)) { return mp_obj_int_get_checked(arg); } else { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError_varg(translate("can't convert to %q"), MP_QSTR_int); - } else { + #else mp_raise_TypeError_varg( translate("can't convert %q to %q"), mp_obj_get_type_qstr(arg), MP_QSTR_int); - } + #endif } } @@ -325,12 +325,12 @@ mp_float_t mp_obj_get_float(mp_obj_t arg) { mp_float_t val; if (!mp_obj_get_float_maybe(arg, &val)) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError_varg(translate("can't convert to %q"), MP_QSTR_float); - } else { + #else mp_raise_TypeError_varg( translate("can't convert %q to %q"), mp_obj_get_type_qstr(arg), MP_QSTR_float); - } + #endif } return val; @@ -358,12 +358,12 @@ void mp_obj_get_complex(mp_obj_t arg, mp_float_t *real, mp_float_t *imag) { } else if (MP_OBJ_IS_TYPE(arg, &mp_type_complex)) { mp_obj_complex_get(arg, real, imag); } else { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError_varg(translate("can't convert to %q"), MP_QSTR_complex); - } else { + #else mp_raise_TypeError_varg( translate("can't convert %q to %q"), mp_obj_get_type_qstr(arg), MP_QSTR_complex); - } + #endif } } #endif @@ -376,12 +376,12 @@ void mp_obj_get_array(mp_obj_t o, size_t *len, mp_obj_t **items) { } else if (MP_OBJ_IS_TYPE(o, &mp_type_list)) { mp_obj_list_get(o, len, items); } else { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("expected tuple/list")); - } else { + #else mp_raise_TypeError_varg( translate("object '%q' is not a tuple or list"), mp_obj_get_type_qstr(o)); - } + #endif } } @@ -390,12 +390,12 @@ void mp_obj_get_array_fixed_n(mp_obj_t o, size_t len, mp_obj_t **items) { size_t seq_len; mp_obj_get_array(o, &seq_len, items); if (seq_len != len) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_ValueError(translate("tuple/list has wrong length")); - } else { + #else mp_raise_ValueError_varg(translate("requested length %d but object has length %d"), (int)len, (int)seq_len); - } + #endif } } @@ -405,13 +405,13 @@ size_t mp_get_index(const mp_obj_type_t *type, size_t len, mp_obj_t index, bool if (MP_OBJ_IS_SMALL_INT(index)) { i = MP_OBJ_SMALL_INT_VALUE(index); } else if (!mp_obj_get_int_maybe(index, &i)) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("indices must be integers")); - } else { + #else mp_raise_TypeError_varg( translate("%q indices must be integers, not %q"), type->name, mp_obj_get_type_qstr(index)); - } + #endif } if (i < 0) { @@ -425,12 +425,12 @@ size_t mp_get_index(const mp_obj_type_t *type, size_t len, mp_obj_t index, bool } } else { if (i < 0 || (mp_uint_t)i >= len) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_IndexError(translate("index out of range")); - } else { + #else mp_raise_msg_varg(&mp_type_IndexError, translate("%q index out of range"), type->name); - } + #endif } } @@ -460,12 +460,12 @@ mp_obj_t mp_obj_id(mp_obj_t o_in) { mp_obj_t mp_obj_len(mp_obj_t o_in) { mp_obj_t len = mp_obj_len_maybe(o_in); if (len == MP_OBJ_NULL) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("object has no len")); - } else { + #else mp_raise_TypeError_varg( translate("object of type '%q' has no len()"), mp_obj_get_type_qstr(o_in)); - } + #endif } else { return len; } @@ -503,26 +503,26 @@ mp_obj_t mp_obj_subscr(mp_obj_t base, mp_obj_t index, mp_obj_t value) { } } if (value == MP_OBJ_NULL) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("object does not support item deletion")); - } else { + #else mp_raise_TypeError_varg( translate("'%q' object does not support item deletion"), mp_obj_get_type_qstr(base)); - } + #endif } else if (value == MP_OBJ_SENTINEL) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("object is not subscriptable")); - } else { + #else mp_raise_TypeError_varg( translate("'%q' object is not subscriptable"), mp_obj_get_type_qstr(base)); - } + #endif } else { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("object does not support item assignment")); - } else { + #else mp_raise_TypeError_varg( translate("'%q' object does not support item assignment"), mp_obj_get_type_qstr(base)); - } + #endif } } diff --git a/py/objnamedtuple.c b/py/objnamedtuple.c index ab2f2f3c0..8b595da57 100644 --- a/py/objnamedtuple.c +++ b/py/objnamedtuple.c @@ -102,17 +102,17 @@ mp_obj_t namedtuple_make_new(const mp_obj_type_t *type_in, size_t n_args, const n_kw = kw_args->used; } if (n_args + n_kw != num_fields) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_arg_error_terse_mismatch(); - } else if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_NORMAL) { + #elif MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_NORMAL mp_raise_TypeError_varg( translate("function takes %d positional arguments but %d were given"), num_fields, n_args + n_kw); - } else if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_DETAILED) { + #else mp_raise_TypeError_varg( translate("%q() takes %d positional arguments but %d were given"), type->base.name, num_fields, n_args + n_kw); - } + #endif } // Create a tuple and set the type to this namedtuple @@ -128,20 +128,20 @@ mp_obj_t namedtuple_make_new(const mp_obj_type_t *type_in, size_t n_args, const qstr kw = mp_obj_str_get_qstr(kw_args->table[i].key); size_t id = mp_obj_namedtuple_find_field(type, kw); if (id == (size_t)-1) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_arg_error_terse_mismatch(); - } else { + #else mp_raise_TypeError_varg( translate("unexpected keyword argument '%q'"), kw); - } + #endif } if (tuple->items[id] != MP_OBJ_NULL) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_arg_error_terse_mismatch(); - } else { + #else mp_raise_TypeError_varg( translate("function got multiple values for argument '%q'"), kw); - } + #endif } tuple->items[id] = kw_args->table[i].value; } diff --git a/py/objstr.c b/py/objstr.c index 34ccab86d..1a59aeaec 100644 --- a/py/objstr.c +++ b/py/objstr.c @@ -971,11 +971,11 @@ STATIC vstr_t mp_obj_str_format_helper(const char *str, const char *top, int *ar vstr_add_byte(&vstr, '}'); continue; } - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError(translate("single '}' encountered in format string")); - } + #endif } if (*str != '{') { vstr_add_byte(&vstr, *str); @@ -1010,18 +1010,18 @@ STATIC vstr_t mp_obj_str_format_helper(const char *str, const char *top, int *ar if (str < top && (*str == 'r' || *str == 's')) { conversion = *str++; } else { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_NORMAL) { + #elif MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_NORMAL mp_raise_ValueError(translate("bad conversion specifier")); - } else { + #else if (str >= top) { mp_raise_ValueError( translate("end of format while looking for conversion specifier")); } else { mp_raise_ValueError_varg(translate("unknown conversion specifier %c"), *str); } - } + #endif } } @@ -1047,18 +1047,18 @@ STATIC vstr_t mp_obj_str_format_helper(const char *str, const char *top, int *ar } } if (str >= top) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError(translate("unmatched '{' in format")); - } + #endif } if (*str != '}') { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { - terse_str_format_value_error(); - } else { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE +:w + #else mp_raise_ValueError(translate("expected ':' after format specifier")); - } + #endif } mp_obj_t arg = mp_const_none; @@ -1067,12 +1067,12 @@ STATIC vstr_t mp_obj_str_format_helper(const char *str, const char *top, int *ar int index = 0; if (MP_LIKELY(unichar_isdigit(*field_name))) { if (*arg_i > 0) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError( translate("can't switch from automatic field numbering to manual field specification")); - } + #endif } field_name = str_to_int(field_name, field_name_top, &index); if ((uint)index >= n_args - 1) { @@ -1096,12 +1096,12 @@ STATIC vstr_t mp_obj_str_format_helper(const char *str, const char *top, int *ar } } else { if (*arg_i < 0) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError( translate("can't switch from manual field specification to automatic field numbering")); - } + #endif } if ((uint)*arg_i >= n_args - 1) { mp_raise_IndexError_varg(translate("%q index out of range"), MP_QSTR_tuple); @@ -1189,11 +1189,11 @@ STATIC vstr_t mp_obj_str_format_helper(const char *str, const char *top, int *ar type = *s++; } if (*s) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError(translate("invalid format specifier")); - } + #endif } vstr_clear(&format_spec_vstr); } @@ -1210,19 +1210,19 @@ STATIC vstr_t mp_obj_str_format_helper(const char *str, const char *top, int *ar if (flags & (PF_FLAG_SHOW_SIGN | PF_FLAG_SPACE_SIGN)) { if (type == 's') { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError(translate("sign not allowed in string format specifier")); - } + #endif } if (type == 'c') { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError( translate("sign not allowed with integer format specifier 'c'")); - } + #endif } } @@ -1276,13 +1276,13 @@ STATIC vstr_t mp_obj_str_format_helper(const char *str, const char *top, int *ar break; default: - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError_varg( translate("unknown format code '%c' for object of type '%q'"), type, mp_obj_get_type_qstr(arg)); - } + #endif } } @@ -1348,24 +1348,24 @@ STATIC vstr_t mp_obj_str_format_helper(const char *str, const char *top, int *ar #endif default: - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError_varg( translate("unknown format code '%c' for object of type '%q'"), type, mp_obj_get_type_qstr(arg)); - } + #endif } } else { // arg doesn't look like a number if (align == '=') { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError( translate("'=' alignment not allowed in string format specifier")); - } + #endif } switch (type) { @@ -1384,13 +1384,13 @@ STATIC vstr_t mp_obj_str_format_helper(const char *str, const char *top, int *ar } default: - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError_varg( translate("unknown format code '%c' for object of type '%q'"), type, mp_obj_get_type_qstr(arg)); - } + #endif } } } @@ -1442,11 +1442,11 @@ STATIC mp_obj_t str_modulo_format(mp_obj_t pattern, size_t n_args, const mp_obj_ const byte *key = ++str; while (*str != ')') { if (str >= top) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError(translate("incomplete format key")); - } + #endif } ++str; } @@ -1500,11 +1500,11 @@ STATIC mp_obj_t str_modulo_format(mp_obj_t pattern, size_t n_args, const mp_obj_ if (str >= top) { incomplete_format: - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError(translate("incomplete format")); - } + #endif } // Tuple value lookup @@ -1587,13 +1587,13 @@ not_enough_args: break; default: - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE terse_str_format_value_error(); - } else { + #else mp_raise_ValueError_varg( translate("unsupported format character '%c' (0x%x) at index %d"), *str, *str, str - start_str); - } + #endif } } @@ -2130,12 +2130,13 @@ bool mp_obj_str_equal(mp_obj_t s1, mp_obj_t s2) { } STATIC NORETURN void bad_implicit_conversion(mp_obj_t self_in) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("can't convert to str implicitly")); - } else { + #else const qstr src_name = mp_obj_get_type_qstr(self_in); mp_raise_TypeError_varg(translate("can't convert '%q' object to %q implicitly"), src_name, src_name == MP_QSTR_str ? MP_QSTR_bytes : MP_QSTR_str); + #endif } // use this if you will anyway convert the string to a qstr diff --git a/py/objtype.c b/py/objtype.c index ccd014c33..1254b015c 100644 --- a/py/objtype.c +++ b/py/objtype.c @@ -373,12 +373,12 @@ mp_obj_t mp_obj_instance_make_new(const mp_obj_type_t *self, size_t n_args, cons m_del(mp_obj_t, args2, 2 + n_args + 2 * n_kw); } if (init_ret != mp_const_none) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("__init__() should return None")); - } else { + #else mp_raise_TypeError_varg(translate("__init__() should return None, not '%q'"), mp_obj_get_type_qstr(init_ret)); - } + #endif } } @@ -888,12 +888,12 @@ mp_obj_t mp_obj_instance_call(mp_obj_t self_in, size_t n_args, size_t n_kw, cons mp_obj_t member[2] = {MP_OBJ_NULL, MP_OBJ_NULL}; mp_obj_t call = mp_obj_instance_get_call(self_in, member); if (call == MP_OBJ_NULL) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("object not callable")); - } else { + #else mp_raise_TypeError_varg(translate("'%q' object is not callable"), mp_obj_get_type_qstr(self_in)); - } + #endif } mp_obj_instance_t *self = MP_OBJ_TO_PTR(self_in); if (call == MP_OBJ_SENTINEL) { @@ -1024,11 +1024,11 @@ STATIC mp_obj_t type_call(mp_obj_t self_in, size_t n_args, size_t n_kw, const mp mp_obj_type_t *self = MP_OBJ_TO_PTR(self_in); if (self->make_new == NULL) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("cannot create instance")); - } else { + #else mp_raise_TypeError_varg(translate("cannot create '%q' instances"), self->name); - } + #endif } // create a map directly from the given args array and make a new instance @@ -1134,12 +1134,12 @@ mp_obj_t mp_obj_new_type(qstr name, mp_obj_t bases_tuple, mp_obj_t locals_dict) mp_obj_type_t *t = MP_OBJ_TO_PTR(bases_items[i]); // TODO: Verify with CPy, tested on function type if (t->make_new == NULL) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("type is not an acceptable base type")); - } else { + #else mp_raise_TypeError_varg( translate("type '%q' is not an acceptable base type"), t->name); - } + #endif } #if ENABLE_SPECIAL_ACCESSORS if (mp_obj_is_instance_type(t)) { diff --git a/py/parsenum.c b/py/parsenum.c index da63825e4..a72829b20 100644 --- a/py/parsenum.c +++ b/py/parsenum.c @@ -145,16 +145,16 @@ overflow: goto have_ret_val; } -value_error: - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { +value_error: ; + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_obj_t exc = mp_obj_new_exception_msg(&mp_type_ValueError, translate("invalid syntax for integer")); raise_exc(exc, lex); - } else if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_NORMAL) { + #elif MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_NORMAL mp_obj_t exc = mp_obj_new_exception_msg_varg(&mp_type_ValueError, translate("invalid syntax for integer with base %d"), base); raise_exc(exc, lex); - } else { + #else vstr_t vstr; mp_print_t print; vstr_init_print(&vstr, 50, &print); @@ -163,7 +163,7 @@ value_error: mp_obj_t exc = mp_obj_new_exception_arg1(&mp_type_ValueError, mp_obj_new_str_from_vstr(&mp_type_str, &vstr)); raise_exc(exc, lex); - } + #endif } typedef enum { diff --git a/py/runtime.c b/py/runtime.c index 3745e16e3..a3acb954a 100644 --- a/py/runtime.c +++ b/py/runtime.c @@ -177,12 +177,12 @@ mp_obj_t mp_load_global(qstr qst) { #endif elem = mp_map_lookup((mp_map_t*)&mp_module_builtins_globals.map, MP_OBJ_NEW_QSTR(qst), MP_MAP_LOOKUP); if (elem == NULL) { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_msg(&mp_type_NameError, translate("name not defined")); - } else { + #else nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_NameError, translate("name '%q' is not defined"), qst)); - } + #endif } } return elem->value; @@ -275,13 +275,13 @@ mp_obj_t mp_unary_op(mp_unary_op_t op, mp_obj_t arg) { return result; } } - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("unsupported type for operator")); - } else { + #else mp_raise_TypeError_varg( translate("unsupported type for %q: '%q'"), mp_unary_op_method_name[op], mp_obj_get_type_qstr(arg)); - } + #endif } } @@ -582,13 +582,13 @@ generic_binary_op: } unsupported_op: - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("unsupported type for operator")); - } else { + #else mp_raise_TypeError_varg( translate("unsupported types for %q: '%q', '%q'"), mp_binary_op_method_name[op], mp_obj_get_type_qstr(lhs), mp_obj_get_type_qstr(rhs)); - } + #endif zero_division: mp_raise_msg(&mp_type_ZeroDivisionError, translate("division by zero")); @@ -624,11 +624,11 @@ mp_obj_t mp_call_function_n_kw(mp_obj_t fun_in, size_t n_args, size_t n_kw, cons return type->call(fun_in, n_args, n_kw, args); } - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("object not callable")); - } else { + #else mp_raise_TypeError_varg(translate("'%q' object is not callable"), mp_obj_get_type_qstr(fun_in)); - } + #endif } // args contains: fun self/NULL arg(0) ... arg(n_args-2) arg(n_args-1) kw_key(0) kw_val(0) ... kw_key(n_kw-1) kw_val(n_kw-1) @@ -852,19 +852,19 @@ void mp_unpack_sequence(mp_obj_t seq_in, size_t num, mp_obj_t *items) { return; too_short: - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_ValueError(translate("wrong number of values to unpack")); - } else { + #else mp_raise_ValueError_varg(translate("need more than %d values to unpack"), (int)seq_len); - } + #endif too_long: - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_ValueError(translate("wrong number of values to unpack")); - } else { + #else mp_raise_ValueError_varg(translate("too many values to unpack (expected %d)"), (int)num); - } + #endif } // unpacked items are stored in reverse order into the array pointed to by items @@ -916,12 +916,12 @@ void mp_unpack_ex(mp_obj_t seq_in, size_t num_in, mp_obj_t *items) { return; too_short: - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_ValueError(translate("wrong number of values to unpack")); - } else { + #else mp_raise_ValueError_varg(translate("need more than %d values to unpack"), (int)seq_len); - } + #endif } mp_obj_t mp_load_attr(mp_obj_t base, qstr attr) { @@ -1094,9 +1094,9 @@ void mp_load_method(mp_obj_t base, qstr attr, mp_obj_t *dest) { if (dest[0] == MP_OBJ_NULL) { // no attribute/method called attr - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_AttributeError(translate("no such attribute")); - } else { + #elif MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_DETAILED // following CPython, we give a more detailed error message for type objects if (MP_OBJ_IS_TYPE(base, &mp_type_type)) { nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_AttributeError, @@ -1107,7 +1107,11 @@ void mp_load_method(mp_obj_t base, qstr attr, mp_obj_t *dest) { translate("'%q' object has no attribute '%q'"), mp_obj_get_type_qstr(base), attr)); } - } + #else + nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_AttributeError, + translate("'%q' object has no attribute '%q'"), + mp_obj_get_type_qstr(base), attr)); + #endif } } @@ -1168,13 +1172,13 @@ void mp_store_attr(mp_obj_t base, qstr attr, mp_obj_t value) { } #endif } - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_AttributeError(translate("no such attribute")); - } else { + #else nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_AttributeError, translate("'%q' object cannot assign attribute '%q'"), mp_obj_get_type_qstr(base), attr)); - } + #endif } mp_obj_t mp_getiter(mp_obj_t o_in, mp_obj_iter_buf_t *iter_buf) { @@ -1209,12 +1213,12 @@ mp_obj_t mp_getiter(mp_obj_t o_in, mp_obj_iter_buf_t *iter_buf) { } // object not iterable - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("object not iterable")); - } else { + #else mp_raise_TypeError_varg( translate("'%q' object is not iterable"), mp_obj_get_type_qstr(o_in)); - } + #endif } // may return MP_OBJ_STOP_ITERATION as an optimisation instead of raise StopIteration() @@ -1231,12 +1235,12 @@ mp_obj_t mp_iternext_allow_raise(mp_obj_t o_in) { // __next__ exists, call it and return its result return mp_call_method_n_kw(0, 0, dest); } else { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("object not an iterator")); - } else { + #else mp_raise_TypeError_varg(translate("'%q' object is not an iterator"), mp_obj_get_type_qstr(o_in)); - } + #endif } } } @@ -1267,12 +1271,12 @@ mp_obj_t mp_iternext(mp_obj_t o_in) { } } } else { - if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { + #if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE mp_raise_TypeError(translate("object not an iterator")); - } else { + #else mp_raise_TypeError_varg(translate("'%q' object is not an iterator"), mp_obj_get_type_qstr(o_in)); - } + #endif } } } -- cgit v1.2.3 From aaca3eccf12d4b6ea6e294af81c8d19ad330be0c Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 19 Nov 2020 16:19:37 -0600 Subject: samd: PDMIn: Reduce code unrolling on samd21 only Instead of unrolling the code 16 times, unroll it 4 times and loop over it 4 times. This gives the same 16 iterations, but at an expense of less flash space. --- ports/atmel-samd/common-hal/audiobusio/PDMIn.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/ports/atmel-samd/common-hal/audiobusio/PDMIn.c b/ports/atmel-samd/common-hal/audiobusio/PDMIn.c index 3c9ec05c2..8911aef2f 100644 --- a/ports/atmel-samd/common-hal/audiobusio/PDMIn.c +++ b/ports/atmel-samd/common-hal/audiobusio/PDMIn.c @@ -337,7 +337,11 @@ const uint16_t sinc_filter [OVERSAMPLING] = { 94, 63, 39, 21, 9, 2, 0, 0 }; -#define REPEAT_16_TIMES(X) X X X X X X X X X X X X X X X X +#ifdef SAMD21 +#define REPEAT_16_TIMES(X) do { for(uint8_t j=0; j<4; j++) { X X X X } } while (0) +#else +#define REPEAT_16_TIMES(X) do { X X X X X X X X X X X X X X X X } while(0) +#endif static uint16_t filter_sample(uint32_t pdm_samples[4]) { uint16_t running_sum = 0; @@ -354,7 +358,7 @@ static uint16_t filter_sample(uint32_t pdm_samples[4]) { filter_ptr++; pdm_sample <<= 1; } - ) + ); } return running_sum; } -- cgit v1.2.3 From 982bce7259a9bbf7493f86258fc3395f31081648 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 19 Nov 2020 16:23:35 -0600 Subject: py.mk: allow translation to be overriden in GNUmakefile I like to use local makefile overrides, in the file GNUmakefile (or, on case-sensitive systems, makefile) to set compilation choices. However, writing TRANSLATION := de_DE include Makefile did not work, because py.mk would override the TRANSLATION := specified in an earlier part of the makefiles (but not from the commandline). By using ?= instead of := the local makefile override works, but when TRANSLATION is not specified it continues to work as before. --- py/py.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/py/py.mk b/py/py.mk index acf5d127b..eeb3b8650 100644 --- a/py/py.mk +++ b/py/py.mk @@ -7,7 +7,7 @@ HEADER_BUILD = $(BUILD)/genhdr # file containing qstr defs for the core Python bit PY_QSTR_DEFS = $(PY_SRC)/qstrdefs.h -TRANSLATION := en_US +TRANSLATION ?= en_US # If qstr autogeneration is not disabled we specify the output header # for all collected qstrings. -- cgit v1.2.3 From 17a8bafe0513c81565d25a6633808c639d5fa1f6 Mon Sep 17 00:00:00 2001 From: BennyE Date: Thu, 19 Nov 2020 23:39:48 +0100 Subject: Choose best AP in range if no channel/bssid given --- ports/esp32s2/common-hal/wifi/Radio.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index 1945da207..61c95dea8 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -142,6 +142,11 @@ wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t } else { config->sta.bssid_set = 0; } + // if channel and bssid both not set, do a full scan instead of fast scan + // this will ensure that the best AP is chosen automatically + if ((self->sta.bssid_set == 0) && (self->sta.channel == NULL)) { + config.scan_method = WIFI_ALL_CHANNEL_SCAN; + } esp_wifi_set_config(ESP_IF_WIFI_STA, config); self->starting_retries = 5; self->retries_left = 5; -- cgit v1.2.3 From 6760cdf678061abeaf2627e5903c8601eee6fc66 Mon Sep 17 00:00:00 2001 From: BennyE Date: Fri, 20 Nov 2020 00:11:17 +0100 Subject: Let connect() choose strongest AP if channel and BSSID are not given --- ports/esp32s2/common-hal/wifi/Radio.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index 61c95dea8..bcbca0ec7 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -142,10 +142,10 @@ wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t } else { config->sta.bssid_set = 0; } - // if channel and bssid both not set, do a full scan instead of fast scan - // this will ensure that the best AP is chosen automatically - if ((self->sta.bssid_set == 0) && (self->sta.channel == NULL)) { - config.scan_method = WIFI_ALL_CHANNEL_SCAN; + // If channel is 0 (default/unset) and BSSID is not given, do a full scan instead of fast scan + // This will ensure that the best AP in range is chosen automatically + if ((config->sta.bssid_set == 0) && (config->sta.channel == 0)) { + config->sta.scan_method = WIFI_ALL_CHANNEL_SCAN; } esp_wifi_set_config(ESP_IF_WIFI_STA, config); self->starting_retries = 5; -- cgit v1.2.3 From 2773f534c946df46da5ba87c0968b5e4912a6b2b Mon Sep 17 00:00:00 2001 From: BennyE Date: Fri, 20 Nov 2020 09:40:32 +0100 Subject: Update ports/esp32s2/common-hal/wifi/Radio.c adding suggested changes --- ports/esp32s2/common-hal/wifi/Radio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index bcbca0ec7..f7c431a56 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -146,6 +146,8 @@ wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t // This will ensure that the best AP in range is chosen automatically if ((config->sta.bssid_set == 0) && (config->sta.channel == 0)) { config->sta.scan_method = WIFI_ALL_CHANNEL_SCAN; + } else { + config->sta.scan_method = WIFI_FAST_SCAN; } esp_wifi_set_config(ESP_IF_WIFI_STA, config); self->starting_retries = 5; -- cgit v1.2.3 From 0a06530d52524c76a026ed843165fa79a0526c1b Mon Sep 17 00:00:00 2001 From: Seth Kerr Date: Fri, 20 Nov 2020 15:06:57 -0500 Subject: adding CP-Sapling --- ports/atmel-samd/boards/CP_Sapling_m0/board.c | 40 +++++++++++++++ .../boards/CP_Sapling_m0/mpconfigboard.h | 57 ++++++++++++++++++++++ .../boards/CP_Sapling_m0/mpconfigboard.mk | 24 +++++++++ ports/atmel-samd/boards/CP_Sapling_m0/pins.c | 38 +++++++++++++++ 4 files changed, 159 insertions(+) create mode 100644 ports/atmel-samd/boards/CP_Sapling_m0/board.c create mode 100644 ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.h create mode 100644 ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.mk create mode 100644 ports/atmel-samd/boards/CP_Sapling_m0/pins.c diff --git a/ports/atmel-samd/boards/CP_Sapling_m0/board.c b/ports/atmel-samd/boards/CP_Sapling_m0/board.c new file mode 100644 index 000000000..b745bd906 --- /dev/null +++ b/ports/atmel-samd/boards/CP_Sapling_m0/board.c @@ -0,0 +1,40 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "common-hal/microcontroller/Pin.h" +#include "supervisor/shared/board.h" +#include "hal/include/hal_gpio.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.h b/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.h new file mode 100644 index 000000000..c67f022eb --- /dev/null +++ b/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.h @@ -0,0 +1,57 @@ +#define MICROPY_HW_BOARD_NAME "CP Sapling M0" +#define MICROPY_HW_MCU_NAME "samd21e18" + +#define MICROPY_HW_NEOPIXEL (&pin_PA15) + +#define MICROPY_PORT_A (0) +#define MICROPY_PORT_B (0) +#define MICROPY_PORT_C (0) + +#define IGNORE_PIN_PA02 1 +#define IGNORE_PIN_PA03 1 +#define IGNORE_PIN_PA04 1 +#define IGNORE_PIN_PA05 1 +#define IGNORE_PIN_PA06 1 +#define IGNORE_PIN_PA07 1 +#define IGNORE_PIN_PA12 1 +#define IGNORE_PIN_PA13 1 +#define IGNORE_PIN_PA14 1 +#define IGNORE_PIN_PA20 1 +#define IGNORE_PIN_PA21 1 +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 +#define IGNORE_PIN_PA27 1 +#define IGNORE_PIN_PA28 1 +#define IGNORE_PIN_PA30 1 +#define IGNORE_PIN_PA31 1 +#define IGNORE_PIN_PB01 1 +#define IGNORE_PIN_PB02 1 +#define IGNORE_PIN_PB03 1 +#define IGNORE_PIN_PB04 1 +#define IGNORE_PIN_PB05 1 +#define IGNORE_PIN_PB06 1 +#define IGNORE_PIN_PB07 1 +#define IGNORE_PIN_PB08 1 +#define IGNORE_PIN_PB09 1 +#define IGNORE_PIN_PB10 1 +#define IGNORE_PIN_PB11 1 +#define IGNORE_PIN_PB12 1 +#define IGNORE_PIN_PB13 1 +#define IGNORE_PIN_PB14 1 +#define IGNORE_PIN_PB15 1 +#define IGNORE_PIN_PB16 1 +#define IGNORE_PIN_PB17 1 +#define IGNORE_PIN_PB22 1 +#define IGNORE_PIN_PB23 1 +#define IGNORE_PIN_PB30 1 +#define IGNORE_PIN_PB31 1 +#define IGNORE_PIN_PB00 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PA09) +#define DEFAULT_I2C_BUS_SDA (&pin_PA08) + +#define DEFAULT_SPI_BUS_SS (&pin_PA22) +#define DEFAULT_SPI_BUS_SCK (&pin_PA19) +#define DEFAULT_SPI_BUS_MOSI (&pin_PA18) +#define DEFAULT_SPI_BUS_MISO (&pin_PA17) diff --git a/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.mk b/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.mk new file mode 100644 index 000000000..861a0a5f7 --- /dev/null +++ b/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.mk @@ -0,0 +1,24 @@ +USB_VID = 0x1209 +USB_PID = 0x4DDD +USB_PRODUCT = "CP Sapling" +USB_MANUFACTURER = "Oak Development Technologies" + +CHIP_VARIANT = SAMD21E18A +CHIP_FAMILY = samd21 + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = NONE +CIRCUITPY_FULL_BUILD = 0 + +SUPEROPT_GC = 0 + +CFLAGS_BOARD = --param max-inline-insns-auto=15 +ifeq ($(TRANSLATION), zh_Latn_pinyin) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +endif +ifeq ($(TRANSLATION), de_DE) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +SUPEROPT_VM = 0 +endif diff --git a/ports/atmel-samd/boards/CP_Sapling_m0/pins.c b/ports/atmel-samd/boards/CP_Sapling_m0/pins.c new file mode 100644 index 000000000..ccffe2b3a --- /dev/null +++ b/ports/atmel-samd/boards/CP_Sapling_m0/pins.c @@ -0,0 +1,38 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) }, + + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA00) }, + + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA01) }, + + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) }, + + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_PA22) }, + + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA19) }, + + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA17) }, + + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA18) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA15) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); -- cgit v1.2.3 From b69bbfa3d6dbbe86216f4ea72df54cfd24612fe0 Mon Sep 17 00:00:00 2001 From: Seth Kerr Date: Fri, 20 Nov 2020 15:17:44 -0500 Subject: fixed issues with trailing whitespace check --- ports/atmel-samd/boards/CP_Sapling_m0/board.c | 2 +- ports/atmel-samd/boards/CP_Sapling_m0/pins.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/ports/atmel-samd/boards/CP_Sapling_m0/board.c b/ports/atmel-samd/boards/CP_Sapling_m0/board.c index b745bd906..ce5636676 100644 --- a/ports/atmel-samd/boards/CP_Sapling_m0/board.c +++ b/ports/atmel-samd/boards/CP_Sapling_m0/board.c @@ -29,7 +29,7 @@ #include "supervisor/shared/board.h" #include "hal/include/hal_gpio.h" -void board_init(void) { +void board_init(void) { } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/CP_Sapling_m0/pins.c b/ports/atmel-samd/boards/CP_Sapling_m0/pins.c index ccffe2b3a..d527aaddc 100644 --- a/ports/atmel-samd/boards/CP_Sapling_m0/pins.c +++ b/ports/atmel-samd/boards/CP_Sapling_m0/pins.c @@ -7,7 +7,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA00) }, { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA00) }, - + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA01) }, { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA01) }, @@ -31,7 +31,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA18) }, { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA15) }, - + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, }; -- cgit v1.2.3 From 29e91424d483f0b427957be1c859f7f758f6fbea Mon Sep 17 00:00:00 2001 From: Seth Kerr Date: Fri, 20 Nov 2020 15:29:35 -0500 Subject: removing cp sapling temporarily to read --- ports/atmel-samd/boards/CP_Sapling_m0/board.c | 40 --------------- .../boards/CP_Sapling_m0/mpconfigboard.h | 57 ---------------------- .../boards/CP_Sapling_m0/mpconfigboard.mk | 24 --------- ports/atmel-samd/boards/CP_Sapling_m0/pins.c | 38 --------------- 4 files changed, 159 deletions(-) delete mode 100644 ports/atmel-samd/boards/CP_Sapling_m0/board.c delete mode 100644 ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.h delete mode 100644 ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.mk delete mode 100644 ports/atmel-samd/boards/CP_Sapling_m0/pins.c diff --git a/ports/atmel-samd/boards/CP_Sapling_m0/board.c b/ports/atmel-samd/boards/CP_Sapling_m0/board.c deleted file mode 100644 index ce5636676..000000000 --- a/ports/atmel-samd/boards/CP_Sapling_m0/board.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "boards/board.h" -#include "common-hal/microcontroller/Pin.h" -#include "supervisor/shared/board.h" -#include "hal/include/hal_gpio.h" - -void board_init(void) { -} - -bool board_requests_safe_mode(void) { - return false; -} - -void reset_board(void) { -} diff --git a/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.h b/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.h deleted file mode 100644 index c67f022eb..000000000 --- a/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.h +++ /dev/null @@ -1,57 +0,0 @@ -#define MICROPY_HW_BOARD_NAME "CP Sapling M0" -#define MICROPY_HW_MCU_NAME "samd21e18" - -#define MICROPY_HW_NEOPIXEL (&pin_PA15) - -#define MICROPY_PORT_A (0) -#define MICROPY_PORT_B (0) -#define MICROPY_PORT_C (0) - -#define IGNORE_PIN_PA02 1 -#define IGNORE_PIN_PA03 1 -#define IGNORE_PIN_PA04 1 -#define IGNORE_PIN_PA05 1 -#define IGNORE_PIN_PA06 1 -#define IGNORE_PIN_PA07 1 -#define IGNORE_PIN_PA12 1 -#define IGNORE_PIN_PA13 1 -#define IGNORE_PIN_PA14 1 -#define IGNORE_PIN_PA20 1 -#define IGNORE_PIN_PA21 1 -// USB is always used internally so skip the pin objects for it. -#define IGNORE_PIN_PA24 1 -#define IGNORE_PIN_PA25 1 -#define IGNORE_PIN_PA27 1 -#define IGNORE_PIN_PA28 1 -#define IGNORE_PIN_PA30 1 -#define IGNORE_PIN_PA31 1 -#define IGNORE_PIN_PB01 1 -#define IGNORE_PIN_PB02 1 -#define IGNORE_PIN_PB03 1 -#define IGNORE_PIN_PB04 1 -#define IGNORE_PIN_PB05 1 -#define IGNORE_PIN_PB06 1 -#define IGNORE_PIN_PB07 1 -#define IGNORE_PIN_PB08 1 -#define IGNORE_PIN_PB09 1 -#define IGNORE_PIN_PB10 1 -#define IGNORE_PIN_PB11 1 -#define IGNORE_PIN_PB12 1 -#define IGNORE_PIN_PB13 1 -#define IGNORE_PIN_PB14 1 -#define IGNORE_PIN_PB15 1 -#define IGNORE_PIN_PB16 1 -#define IGNORE_PIN_PB17 1 -#define IGNORE_PIN_PB22 1 -#define IGNORE_PIN_PB23 1 -#define IGNORE_PIN_PB30 1 -#define IGNORE_PIN_PB31 1 -#define IGNORE_PIN_PB00 1 - -#define DEFAULT_I2C_BUS_SCL (&pin_PA09) -#define DEFAULT_I2C_BUS_SDA (&pin_PA08) - -#define DEFAULT_SPI_BUS_SS (&pin_PA22) -#define DEFAULT_SPI_BUS_SCK (&pin_PA19) -#define DEFAULT_SPI_BUS_MOSI (&pin_PA18) -#define DEFAULT_SPI_BUS_MISO (&pin_PA17) diff --git a/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.mk b/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.mk deleted file mode 100644 index 861a0a5f7..000000000 --- a/ports/atmel-samd/boards/CP_Sapling_m0/mpconfigboard.mk +++ /dev/null @@ -1,24 +0,0 @@ -USB_VID = 0x1209 -USB_PID = 0x4DDD -USB_PRODUCT = "CP Sapling" -USB_MANUFACTURER = "Oak Development Technologies" - -CHIP_VARIANT = SAMD21E18A -CHIP_FAMILY = samd21 - -INTERNAL_FLASH_FILESYSTEM = 1 -LONGINT_IMPL = NONE -CIRCUITPY_FULL_BUILD = 0 - -SUPEROPT_GC = 0 - -CFLAGS_BOARD = --param max-inline-insns-auto=15 -ifeq ($(TRANSLATION), zh_Latn_pinyin) -RELEASE_NEEDS_CLEAN_BUILD = 1 -CFLAGS_INLINE_LIMIT = 35 -endif -ifeq ($(TRANSLATION), de_DE) -RELEASE_NEEDS_CLEAN_BUILD = 1 -CFLAGS_INLINE_LIMIT = 35 -SUPEROPT_VM = 0 -endif diff --git a/ports/atmel-samd/boards/CP_Sapling_m0/pins.c b/ports/atmel-samd/boards/CP_Sapling_m0/pins.c deleted file mode 100644 index d527aaddc..000000000 --- a/ports/atmel-samd/boards/CP_Sapling_m0/pins.c +++ /dev/null @@ -1,38 +0,0 @@ -#include "shared-bindings/board/__init__.h" - -STATIC const mp_rom_map_elem_t board_global_dict_table[] = { - - { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA08) }, - { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) }, - - { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA00) }, - { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA00) }, - - { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA01) }, - { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA01) }, - - { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA09) }, - { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) }, - - { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA22) }, - { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA22) }, - { MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_PA22) }, - - { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA19) }, - { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA19) }, - { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA19) }, - - { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA17) }, - { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA17) }, - { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA17) }, - - { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA18) }, - { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA18) }, - { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA18) }, - - { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA15) }, - - { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, - { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, -}; -MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); -- cgit v1.2.3 From c4f4cdd8c15ef54ed05533b3f4c9d28bf9f9c46f Mon Sep 17 00:00:00 2001 From: Seth Kerr Date: Fri, 20 Nov 2020 15:31:49 -0500 Subject: readding cp_sapling directory --- ports/atmel-samd/boards/cp_sapling_m0/board.c | 40 +++++++++++++++ .../boards/cp_sapling_m0/mpconfigboard.h | 57 ++++++++++++++++++++++ .../boards/cp_sapling_m0/mpconfigboard.mk | 24 +++++++++ ports/atmel-samd/boards/cp_sapling_m0/pins.c | 38 +++++++++++++++ 4 files changed, 159 insertions(+) create mode 100644 ports/atmel-samd/boards/cp_sapling_m0/board.c create mode 100644 ports/atmel-samd/boards/cp_sapling_m0/mpconfigboard.h create mode 100644 ports/atmel-samd/boards/cp_sapling_m0/mpconfigboard.mk create mode 100644 ports/atmel-samd/boards/cp_sapling_m0/pins.c diff --git a/ports/atmel-samd/boards/cp_sapling_m0/board.c b/ports/atmel-samd/boards/cp_sapling_m0/board.c new file mode 100644 index 000000000..b745bd906 --- /dev/null +++ b/ports/atmel-samd/boards/cp_sapling_m0/board.c @@ -0,0 +1,40 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "common-hal/microcontroller/Pin.h" +#include "supervisor/shared/board.h" +#include "hal/include/hal_gpio.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/cp_sapling_m0/mpconfigboard.h b/ports/atmel-samd/boards/cp_sapling_m0/mpconfigboard.h new file mode 100644 index 000000000..c67f022eb --- /dev/null +++ b/ports/atmel-samd/boards/cp_sapling_m0/mpconfigboard.h @@ -0,0 +1,57 @@ +#define MICROPY_HW_BOARD_NAME "CP Sapling M0" +#define MICROPY_HW_MCU_NAME "samd21e18" + +#define MICROPY_HW_NEOPIXEL (&pin_PA15) + +#define MICROPY_PORT_A (0) +#define MICROPY_PORT_B (0) +#define MICROPY_PORT_C (0) + +#define IGNORE_PIN_PA02 1 +#define IGNORE_PIN_PA03 1 +#define IGNORE_PIN_PA04 1 +#define IGNORE_PIN_PA05 1 +#define IGNORE_PIN_PA06 1 +#define IGNORE_PIN_PA07 1 +#define IGNORE_PIN_PA12 1 +#define IGNORE_PIN_PA13 1 +#define IGNORE_PIN_PA14 1 +#define IGNORE_PIN_PA20 1 +#define IGNORE_PIN_PA21 1 +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 +#define IGNORE_PIN_PA27 1 +#define IGNORE_PIN_PA28 1 +#define IGNORE_PIN_PA30 1 +#define IGNORE_PIN_PA31 1 +#define IGNORE_PIN_PB01 1 +#define IGNORE_PIN_PB02 1 +#define IGNORE_PIN_PB03 1 +#define IGNORE_PIN_PB04 1 +#define IGNORE_PIN_PB05 1 +#define IGNORE_PIN_PB06 1 +#define IGNORE_PIN_PB07 1 +#define IGNORE_PIN_PB08 1 +#define IGNORE_PIN_PB09 1 +#define IGNORE_PIN_PB10 1 +#define IGNORE_PIN_PB11 1 +#define IGNORE_PIN_PB12 1 +#define IGNORE_PIN_PB13 1 +#define IGNORE_PIN_PB14 1 +#define IGNORE_PIN_PB15 1 +#define IGNORE_PIN_PB16 1 +#define IGNORE_PIN_PB17 1 +#define IGNORE_PIN_PB22 1 +#define IGNORE_PIN_PB23 1 +#define IGNORE_PIN_PB30 1 +#define IGNORE_PIN_PB31 1 +#define IGNORE_PIN_PB00 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PA09) +#define DEFAULT_I2C_BUS_SDA (&pin_PA08) + +#define DEFAULT_SPI_BUS_SS (&pin_PA22) +#define DEFAULT_SPI_BUS_SCK (&pin_PA19) +#define DEFAULT_SPI_BUS_MOSI (&pin_PA18) +#define DEFAULT_SPI_BUS_MISO (&pin_PA17) diff --git a/ports/atmel-samd/boards/cp_sapling_m0/mpconfigboard.mk b/ports/atmel-samd/boards/cp_sapling_m0/mpconfigboard.mk new file mode 100644 index 000000000..861a0a5f7 --- /dev/null +++ b/ports/atmel-samd/boards/cp_sapling_m0/mpconfigboard.mk @@ -0,0 +1,24 @@ +USB_VID = 0x1209 +USB_PID = 0x4DDD +USB_PRODUCT = "CP Sapling" +USB_MANUFACTURER = "Oak Development Technologies" + +CHIP_VARIANT = SAMD21E18A +CHIP_FAMILY = samd21 + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = NONE +CIRCUITPY_FULL_BUILD = 0 + +SUPEROPT_GC = 0 + +CFLAGS_BOARD = --param max-inline-insns-auto=15 +ifeq ($(TRANSLATION), zh_Latn_pinyin) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +endif +ifeq ($(TRANSLATION), de_DE) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +SUPEROPT_VM = 0 +endif diff --git a/ports/atmel-samd/boards/cp_sapling_m0/pins.c b/ports/atmel-samd/boards/cp_sapling_m0/pins.c new file mode 100644 index 000000000..ccffe2b3a --- /dev/null +++ b/ports/atmel-samd/boards/cp_sapling_m0/pins.c @@ -0,0 +1,38 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) }, + + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA00) }, + + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA01) }, + + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) }, + + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_PA22) }, + + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA19) }, + + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA17) }, + + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA18) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA15) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); -- cgit v1.2.3 From 1c92b1bf61cb0625a6ff7114623cd1cfdc6d5d75 Mon Sep 17 00:00:00 2001 From: Seth Kerr Date: Fri, 20 Nov 2020 15:35:52 -0500 Subject: forgot to run pre-commit local --- ports/atmel-samd/boards/cp_sapling_m0/board.c | 2 +- ports/atmel-samd/boards/cp_sapling_m0/pins.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/ports/atmel-samd/boards/cp_sapling_m0/board.c b/ports/atmel-samd/boards/cp_sapling_m0/board.c index b745bd906..ce5636676 100644 --- a/ports/atmel-samd/boards/cp_sapling_m0/board.c +++ b/ports/atmel-samd/boards/cp_sapling_m0/board.c @@ -29,7 +29,7 @@ #include "supervisor/shared/board.h" #include "hal/include/hal_gpio.h" -void board_init(void) { +void board_init(void) { } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/cp_sapling_m0/pins.c b/ports/atmel-samd/boards/cp_sapling_m0/pins.c index ccffe2b3a..d527aaddc 100644 --- a/ports/atmel-samd/boards/cp_sapling_m0/pins.c +++ b/ports/atmel-samd/boards/cp_sapling_m0/pins.c @@ -7,7 +7,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA00) }, { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA00) }, - + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA01) }, { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA01) }, @@ -31,7 +31,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA18) }, { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA15) }, - + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, }; -- cgit v1.2.3 From b34e36d1db127f84f4448f015406fa835cde48da Mon Sep 17 00:00:00 2001 From: Seth Kerr Date: Fri, 20 Nov 2020 15:44:53 -0500 Subject: fixing build.yml --- .github/workflows/build.yml | 1 + 1 file changed, 1 insertion(+) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index f3e728a05..fa6033211 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -197,6 +197,7 @@ jobs: - "circuitplayground_express_crickit" - "circuitplayground_express_displayio" - "clue_nrf52840_express" + - "cp_sapling_m0" - "cp32-m4" - "datalore_ip_m4" - "datum_distance" -- cgit v1.2.3 From 0fb075ab7e55b9cb7b84ece6a0247fd0b73dedb2 Mon Sep 17 00:00:00 2001 From: Seth Kerr Date: Fri, 20 Nov 2020 16:15:50 -0500 Subject: changed tab to spaces in build.yml, passes local pre-commit --- .github/workflows/build.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index fa6033211..4d04e3f93 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -197,7 +197,7 @@ jobs: - "circuitplayground_express_crickit" - "circuitplayground_express_displayio" - "clue_nrf52840_express" - - "cp_sapling_m0" + - "cp_sapling_m0" - "cp32-m4" - "datalore_ip_m4" - "datum_distance" -- cgit v1.2.3 From 8301dcada00bdc63ac70de39ec5a0bdb6ae502ba Mon Sep 17 00:00:00 2001 From: Seth Kerr Date: Fri, 20 Nov 2020 16:26:33 -0500 Subject: I need to revisit the alphabet... --- .github/workflows/build.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 4d04e3f93..8e72a4021 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -197,8 +197,8 @@ jobs: - "circuitplayground_express_crickit" - "circuitplayground_express_displayio" - "clue_nrf52840_express" - - "cp_sapling_m0" - "cp32-m4" + - "cp_sapling_m0" - "datalore_ip_m4" - "datum_distance" - "datum_imu" -- cgit v1.2.3 From f25ac45534c6bc00c4eb0d5aedb8fcdbb673a310 Mon Sep 17 00:00:00 2001 From: Noel Gaetan Date: Thu, 19 Nov 2020 17:19:09 +0000 Subject: Translated using Weblate (French) Currently translated at 100.0% (848 of 848 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/fr/ --- locale/fr.po | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/locale/fr.po b/locale/fr.po index a15bbb8d5..b58ca6560 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -8,8 +8,8 @@ msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-10 15:30+0530\n" -"PO-Revision-Date: 2020-11-15 16:28+0000\n" -"Last-Translator: Antonin ENFRUN \n" +"PO-Revision-Date: 2020-11-20 22:28+0000\n" +"Last-Translator: Noel Gaetan \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" @@ -1027,7 +1027,7 @@ msgstr "Taille de tampon incorrecte" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" -msgstr "" +msgstr "L'initialisation a échoué par manque de mémoire" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" @@ -3715,7 +3715,7 @@ msgstr "les vecteurs doivent avoir la même longueur" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "watchdog not initialized" -msgstr "" +msgstr "chien de garde non initialisé" #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" -- cgit v1.2.3 From 7b5e826b18d8777e5dcc994ea41b29e099cc9fa1 Mon Sep 17 00:00:00 2001 From: Jonny Bergdahl Date: Thu, 19 Nov 2020 22:11:10 +0000 Subject: Translated using Weblate (Swedish) Currently translated at 100.0% (848 of 848 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/sv/ --- locale/sv.po | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/locale/sv.po b/locale/sv.po index 55e6368ae..cc6fe8ad0 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-11-10 15:30+0530\n" -"PO-Revision-Date: 2020-11-15 16:28+0000\n" +"PO-Revision-Date: 2020-11-20 22:28+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" "Language: sv\n" @@ -1014,7 +1014,7 @@ msgstr "Fel buffertstorlek" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" -msgstr "" +msgstr "Initieringen misslyckades på grund av minnesbrist" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" @@ -3672,7 +3672,7 @@ msgstr "vektorer måste ha samma längd" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "watchdog not initialized" -msgstr "" +msgstr "watchdog är inte initierad" #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" -- cgit v1.2.3 From f3b5ca5f01058cb1d50be09838bc55b22d3aae69 Mon Sep 17 00:00:00 2001 From: microDev <70126934+microDev1@users.noreply.github.com> Date: Sun, 22 Nov 2020 19:20:21 +0530 Subject: replace goto with conditional break --- ports/esp32s2/peripherals/timer.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/ports/esp32s2/peripherals/timer.c b/ports/esp32s2/peripherals/timer.c index 3aee33dc5..0ae140387 100644 --- a/ports/esp32s2/peripherals/timer.c +++ b/ports/esp32s2/peripherals/timer.c @@ -46,6 +46,8 @@ void peripherals_timer_reset(void) { } void peripherals_timer_init(const timer_config_t * config, timer_index_t * timer) { + bool break_loop = false; + // get free timer for (uint8_t i = 0; i < 2; i++) { for (uint8_t j = 0; j < 2; j++) { @@ -53,16 +55,17 @@ void peripherals_timer_init(const timer_config_t * config, timer_index_t * timer timer->idx = (timer_idx_t)j; timer->group = (timer_group_t)i; timer_state[i][j] = TIMER_BUSY; - goto init_timer; + break_loop = true; + break; } else if (i == 1 && j == 1) { timer->idx = TIMER_MAX; timer->group = TIMER_GROUP_MAX; return; } } + if (break_loop) {break;} } -init_timer: // initialize timer module timer_init(timer->group, timer->idx, config); timer_set_counter_value(timer->group, timer->idx, 0); -- cgit v1.2.3 From f62ea25331678cc400c6149bbe3102c371540c6e Mon Sep 17 00:00:00 2001 From: Dan Halbert Date: Sun, 22 Nov 2020 19:08:27 -0500 Subject: ESP32S2: common_hal_mcu_delay_us() now calls mp_hal_delay_us() --- ports/esp32s2/common-hal/microcontroller/__init__.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/esp32s2/common-hal/microcontroller/__init__.c b/ports/esp32s2/common-hal/microcontroller/__init__.c index e5cfc7eef..dba12b88b 100644 --- a/ports/esp32s2/common-hal/microcontroller/__init__.c +++ b/ports/esp32s2/common-hal/microcontroller/__init__.c @@ -42,7 +42,7 @@ #include "freertos/FreeRTOS.h" void common_hal_mcu_delay_us(uint32_t delay) { - + mp_hal_delay_us(delay); } volatile uint32_t nesting_count = 0; -- cgit v1.2.3 From 9d8be648eec70c36b3a461c4ff45064357d11693 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Sun, 15 Nov 2020 11:48:53 -0600 Subject: ulab: Update to release tag 1.1.0 Disable certain classes of diagnostic when building ulab. We should submit patches upstream to (A) fix these errors and (B) upgrade their CI so that the problems are caught before we want to integrate with CircuitPython, but not right now. --- extmod/ulab | 2 +- locale/circuitpython.pot | 147 +++++++++++++++++++++++++++++++++-------------- py/py.mk | 2 +- 3 files changed, 106 insertions(+), 45 deletions(-) diff --git a/extmod/ulab b/extmod/ulab index 8242b8475..aa7e74153 160000 --- a/extmod/ulab +++ b/extmod/ulab @@ -1 +1 @@ -Subproject commit 8242b84753355433b61230ab6631c06e5ac77f35 +Subproject commit aa7e741530df471d206a4a321823a37a913a0eb8 diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index ec232615d..c184d6931 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-10 15:30+0530\n" +"POT-Creation-Date: 2020-11-23 10:10-0600\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -855,6 +855,10 @@ msgstr "" msgid "FFT is defined for ndarrays only" msgstr "" +#: extmod/ulab/code/fft/fft.c +msgid "FFT is implemented for linear arrays only" +msgstr "" + #: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Failed SSL handshake" msgstr "" @@ -1951,7 +1955,7 @@ msgstr "" msgid "WARNING: Your code filename has two extensions\n" msgstr "" -#: shared-bindings/watchdog/WatchDogTimer.c +#: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -2030,10 +2034,6 @@ msgstr "" msgid "addresses is empty" msgstr "" -#: extmod/ulab/code/vector/vectorise.c -msgid "arctan2 is implemented for scalars and ndarrays only" -msgstr "" - #: py/modbuiltins.c msgid "arg is an empty sequence" msgstr "" @@ -2042,6 +2042,10 @@ msgstr "" msgid "argsort argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "argsort is not implemented for flattened arrays" +msgstr "" + #: py/runtime.c msgid "argument has wrong type" msgstr "" @@ -2059,14 +2063,22 @@ msgstr "" msgid "argument should be a '%q' not a '%q'" msgstr "" -#: extmod/ulab/code/linalg/linalg.c +#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c msgid "arguments must be ndarrays" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "array and index length must be equal" +msgstr "" + #: py/objarray.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "attempt to get (arg)min/(arg)max of empty sequence" +msgstr "" + #: extmod/ulab/code/numerical/numerical.c msgid "attempt to get argmin/argmax of an empty sequence" msgstr "" @@ -2076,15 +2088,15 @@ msgid "attributes not supported yet" msgstr "" #: extmod/ulab/code/numerical/numerical.c -msgid "axis must be -1, 0, None, or 1" +msgid "axis is out of bounds" msgstr "" #: extmod/ulab/code/numerical/numerical.c -msgid "axis must be -1, 0, or 1" +msgid "axis must be None, or an integer" msgstr "" #: extmod/ulab/code/numerical/numerical.c -msgid "axis must be None, 0, or 1" +msgid "axis too long" msgstr "" #: py/builtinevex.c @@ -2288,6 +2300,10 @@ msgid "" "can't switch from manual field specification to automatic field numbering" msgstr "" +#: extmod/ulab/code/ndarray_operators.c +msgid "cannot cast output with casting rule" +msgstr "" + #: py/objtype.c msgid "cannot create '%q' instances" msgstr "" @@ -2304,10 +2320,6 @@ msgstr "" msgid "cannot perform relative import" msgstr "" -#: extmod/ulab/code/ndarray.c -msgid "cannot reshape array (incompatible input/output shape)" -msgstr "" - #: py/emitnative.c msgid "casting" msgstr "" @@ -2380,10 +2392,6 @@ msgstr "" msgid "convolve arguments must not be empty" msgstr "" -#: extmod/ulab/code/ndarray.c -msgid "could not broadast input array from shape" -msgstr "" - #: extmod/ulab/code/poly/poly.c msgid "could not invert Vandermonde matrix" msgstr "" @@ -2392,6 +2400,10 @@ msgstr "" msgid "couldn't determine SD card version" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "cross is defined for 1D arrays of length 3" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "data must be iterable" msgstr "" @@ -2400,10 +2412,6 @@ msgstr "" msgid "data must be of equal length" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "ddof must be smaller than length of data set" -msgstr "" - #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2433,6 +2441,10 @@ msgstr "" msgid "diff argument must be an ndarray" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "differentiation order out of range" +msgstr "" + #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c #: shared-bindings/math/__init__.c msgid "division by zero" @@ -2548,6 +2560,10 @@ msgstr "" msgid "first argument must be a function" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "first argument must be a tuple of ndarrays" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "first argument must be an iterable" msgstr "" @@ -2601,8 +2617,8 @@ msgstr "" msgid "function has the same sign at the ends of interval" msgstr "" -#: extmod/ulab/code/compare/compare.c -msgid "function is implemented for scalars and ndarrays only" +#: extmod/ulab/code/ndarray.c +msgid "function is defined for ndarrays only" msgstr "" #: py/argcheck.c @@ -2672,6 +2688,7 @@ msgstr "" msgid "index is out of bounds" msgstr "" +#: extmod/ulab/code/numerical/numerical.c #: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" @@ -2696,6 +2713,10 @@ msgstr "" msgid "inline assembler must be a function" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "input and output shapes are not compatible" +msgstr "" + #: extmod/ulab/code/ulab_create.c msgid "input argument must be an integer or a 2-tuple" msgstr "" @@ -2704,6 +2725,10 @@ msgstr "" msgid "input array length must be power of 2" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "input arrays are not compatible" +msgstr "" + #: extmod/ulab/code/poly/poly.c msgid "input data must be an iterable" msgstr "" @@ -2716,6 +2741,22 @@ msgstr "" msgid "input matrix is singular" msgstr "" +#: extmod/ulab/code/user/user.c +msgid "input must be a dense ndarray" +msgstr "" + +#: extmod/ulab/code/ulab_create.c +msgid "input must be a tensor of rank 2" +msgstr "" + +#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c +msgid "input must be an ndarray" +msgstr "" + +#: extmod/ulab/code/filter/filter.c +msgid "input must be one-dimensional" +msgstr "" + #: extmod/ulab/code/linalg/linalg.c msgid "input must be square matrix" msgstr "" @@ -2728,6 +2769,10 @@ msgstr "" msgid "input vectors must be of equal length" msgstr "" +#: extmod/ulab/code/poly/poly.c +msgid "inputs are not iterable" +msgstr "" + #: py/parsenum.c msgid "int() arg 2 must be >= 2 and <= 36" msgstr "" @@ -2896,6 +2941,10 @@ msgstr "" msgid "max_length must be > 0" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "maximum number of dimensions is 4" +msgstr "" + #: py/runtime.c msgid "maximum recursion depth exceeded" msgstr "" @@ -2945,10 +2994,6 @@ msgstr "" msgid "must use keyword argument for key function" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "n must be between 0, and 9" -msgstr "" - #: py/runtime.c msgid "name '%q' is not defined" msgstr "" @@ -3031,6 +3076,10 @@ msgstr "" msgid "non-keyword arg after keyword arg" msgstr "" +#: extmod/ulab/code/linalg/linalg.c +msgid "norm is defined for 1D and 2D arrays" +msgstr "" + #: shared-bindings/_bleio/UUID.c msgid "not a 128-bit UUID" msgstr "" @@ -3043,10 +3092,6 @@ msgstr "" msgid "not enough arguments for format string" msgstr "" -#: extmod/ulab/code/poly/poly.c -msgid "number of arguments must be 2, or 3" -msgstr "" - #: extmod/ulab/code/ulab_create.c msgid "number of points must be at least 2" msgstr "" @@ -3099,6 +3144,10 @@ msgstr "" msgid "odd-length string" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset is too large" +msgstr "" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "" @@ -3121,6 +3170,14 @@ msgstr "" msgid "operands could not be broadcast together" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "operation is implemented for 1D Boolean arrays only" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "operation is not implemented for flattened array" +msgstr "" + #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3255,6 +3312,10 @@ msgstr "" msgid "requested length %d but object has length %d" msgstr "" +#: extmod/ulab/code/ndarray_operators.c +msgid "results cannot be cast to specified type" +msgstr "" + #: py/compile.c msgid "return annotation must be an identifier" msgstr "" @@ -3273,8 +3334,8 @@ msgstr "" msgid "rgb_pins[%d] is not on the same port as clock" msgstr "" -#: extmod/ulab/code/ndarray.c -msgid "right hand side must be an ndarray, or a scalar" +#: extmod/ulab/code/numerical/numerical.c +msgid "roll argument must be an ndarray" msgstr "" #: py/objstr.c @@ -3300,7 +3361,7 @@ msgid "script compilation not supported" msgstr "" #: extmod/ulab/code/ndarray.c -msgid "shape must be a 2-tuple" +msgid "shape must be a tuple" msgstr "" #: py/objstr.c @@ -3343,10 +3404,6 @@ msgstr "" msgid "sort argument must be an ndarray" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "sorted axis can't be longer than 65535" -msgstr "" - #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "" @@ -3452,6 +3509,10 @@ msgstr "" msgid "timestamp out of range for platform time_t" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "tobytes can be invoked for dense arrays only" +msgstr "" + #: shared-module/struct/__init__.c msgid "too many arguments provided with the given format" msgstr "" @@ -3627,12 +3688,12 @@ msgstr "" msgid "window must be <= interval" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "wrong argument type" +#: extmod/ulab/code/numerical/numerical.c +msgid "wrong axis index" msgstr "" -#: extmod/ulab/code/ndarray.c -msgid "wrong index type" +#: extmod/ulab/code/ulab_create.c +msgid "wrong axis specified" msgstr "" #: extmod/ulab/code/vector/vectorise.c diff --git a/py/py.mk b/py/py.mk index acf5d127b..eb3ba27ac 100644 --- a/py/py.mk +++ b/py/py.mk @@ -109,7 +109,7 @@ ifeq ($(CIRCUITPY_ULAB),1) SRC_MOD += $(patsubst $(TOP)/%,%,$(wildcard $(TOP)/extmod/ulab/code/*.c)) SRC_MOD += $(patsubst $(TOP)/%,%,$(wildcard $(TOP)/extmod/ulab/code/*/*.c)) CFLAGS_MOD += -DCIRCUITPY_ULAB=1 -DMODULE_ULAB_ENABLED=1 -$(BUILD)/extmod/ulab/code/%.o: CFLAGS += -Wno-float-equal -Wno-sign-compare -DCIRCUITPY +$(BUILD)/extmod/ulab/code/%.o: CFLAGS += -Wno-missing-declarations -Wno-missing-prototypes -Wno-unused-parameter -Wno-float-equal -Wno-sign-compare -Wno-cast-align -Wno-shadow -DCIRCUITPY endif # External modules written in C. -- cgit v1.2.3 From 70e978f48b587620bb1407d9717f0a8fc3d4cf26 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Mon, 16 Nov 2020 16:57:01 -0600 Subject: stm: disable ulab on two resource-constrained boards --- ports/stm/boards/meowbit_v121/mpconfigboard.mk | 2 ++ ports/stm/boards/thunderpack/mpconfigboard.mk | 2 ++ 2 files changed, 4 insertions(+) diff --git a/ports/stm/boards/meowbit_v121/mpconfigboard.mk b/ports/stm/boards/meowbit_v121/mpconfigboard.mk index c416700e3..86b0cb5ab 100644 --- a/ports/stm/boards/meowbit_v121/mpconfigboard.mk +++ b/ports/stm/boards/meowbit_v121/mpconfigboard.mk @@ -20,3 +20,5 @@ LD_COMMON = boards/common_default.ld LD_FILE = boards/STM32F401xe_boot.ld # For debugging - also comment BOOTLOADER_OFFSET and BOARD_VTOR_DEFER # LD_FILE = boards/STM32F401xe_fs.ld + +CIRCUITPY_ULAB = 0 diff --git a/ports/stm/boards/thunderpack/mpconfigboard.mk b/ports/stm/boards/thunderpack/mpconfigboard.mk index d303582e0..8f645068d 100644 --- a/ports/stm/boards/thunderpack/mpconfigboard.mk +++ b/ports/stm/boards/thunderpack/mpconfigboard.mk @@ -15,3 +15,5 @@ MCU_PACKAGE = UFQFPN48 LD_COMMON = boards/common_nvm.ld LD_FILE = boards/STM32F411_nvm.ld + +CIRCUITPY_ULAB = 0 -- cgit v1.2.3 From efda9124374dcbffb4f8a58d227e439d34ca7760 Mon Sep 17 00:00:00 2001 From: Kattni Rembor Date: Mon, 23 Nov 2020 15:53:28 -0500 Subject: Add pin names from silk --- ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c index 40c9e91e4..f1ce4b8c6 100644 --- a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c @@ -16,11 +16,16 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_EPD_CS), MP_ROM_PTR(&pin_GPIO8) }, { MP_ROM_QSTR(MP_QSTR_BUTTON_A), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) }, { MP_ROM_QSTR(MP_QSTR_BUTTON_B), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) }, { MP_ROM_QSTR(MP_QSTR_BUTTON_C), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) }, { MP_ROM_QSTR(MP_QSTR_BUTTON_D), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) }, { MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO3) }, { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO4) }, { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO4) }, @@ -36,6 +41,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO21) }, { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO1) }, { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, -- cgit v1.2.3 From 3730862362e914cc92b6977cb5d809856467f8f9 Mon Sep 17 00:00:00 2001 From: Kattni Rembor Date: Mon, 23 Nov 2020 15:56:36 -0500 Subject: Update to match silk rev 1 --- ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c index f1ce4b8c6..6c2dc1151 100644 --- a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c @@ -41,7 +41,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO21) }, { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO1) }, - { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO1) }, { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, -- cgit v1.2.3 From 7928a0d45419181d3f29c809aa0c3c87e58359e3 Mon Sep 17 00:00:00 2001 From: Kattni Rembor Date: Mon, 23 Nov 2020 16:02:45 -0500 Subject: Blank lines to group aliases. --- ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c index 6c2dc1151..0cefb6dfb 100644 --- a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/pins.c @@ -17,10 +17,13 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_BUTTON_A), MP_ROM_PTR(&pin_GPIO15) }, { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_B), MP_ROM_PTR(&pin_GPIO14) }, { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_C), MP_ROM_PTR(&pin_GPIO12) }, { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON_D), MP_ROM_PTR(&pin_GPIO11) }, { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) }, -- cgit v1.2.3