From dd5d7c86d22807c021dd1711eb7dd3daebc5cfcf Mon Sep 17 00:00:00 2001 From: Diego Elio Pettenò Date: Sat, 30 May 2020 10:44:13 +0100 Subject: Fix up end of file and trailing whitespace. This can be enforced by pre-commit, but correct it separately to make it easier to review. --- BUILDING.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'BUILDING.md') diff --git a/BUILDING.md b/BUILDING.md index 73499d65d..bc6002678 100644 --- a/BUILDING.md +++ b/BUILDING.md @@ -1,7 +1,7 @@ # Building CircuitPython -Welcome to CircuitPython! +Welcome to CircuitPython! This document is a quick-start guide only. @@ -28,7 +28,7 @@ This project has a bunch of git submodules. You will need to update them regula As part of the build process, mpy-cross is needed to compile .py files into .mpy files. To compile (or recompile) mpy-cross: - make -C mpy-cross + make -C mpy-cross # Building @@ -68,7 +68,7 @@ A successful run will say something like # Debugging -The easiest way to debug CircuitPython on hardware is with a JLink device, JLinkGDBServer, and an appropriate GDB. +The easiest way to debug CircuitPython on hardware is with a JLink device, JLinkGDBServer, and an appropriate GDB. Instructions can be found at https://learn.adafruit.com/debugging-the-samd21-with-gdb If using JLink, you'll need both the `JLinkGDBServer` and `arm-none-eabi-gdb` running. -- cgit v1.2.3