From 379f454ce6480376eccc8ccf378524d30fdace7a Mon Sep 17 00:00:00 2001 From: gamblor21 Date: Tue, 23 Feb 2021 19:26:11 -0600 Subject: Adding countio to rp2040 --- locale/circuitpython.pot | 150 +++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 145 insertions(+), 5 deletions(-) (limited to 'locale/circuitpython.pot') diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index de902f62f..4fd6e9929 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -339,6 +339,10 @@ msgstr "" msgid "All event channels in use" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" @@ -387,6 +391,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "" @@ -533,6 +538,7 @@ msgstr "" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #, c-format msgid "Bus pin %d is already in use" msgstr "" @@ -586,6 +592,7 @@ msgstr "" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" @@ -863,7 +870,8 @@ msgstr "" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1045,6 +1053,10 @@ msgstr "" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1068,6 +1080,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1080,6 +1096,31 @@ msgstr "" msgid "Input/output error" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1131,7 +1172,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" @@ -1225,6 +1266,8 @@ msgstr "" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "" @@ -1346,6 +1389,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1399,14 +1472,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -1463,6 +1536,10 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1518,6 +1595,10 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1602,11 +1683,20 @@ msgstr "" msgid "Permission denied" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" @@ -1616,6 +1706,10 @@ msgstr "" msgid "Pin is input only" msgstr "" +#: ports/raspberrypi/common-hal/countio/Counter.c +msgid "Pin must be on PWM Channel B" +msgstr "" + #: ports/atmel-samd/common-hal/countio/Counter.c msgid "Pin must support hardware interrupts" msgstr "" @@ -1667,6 +1761,26 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" @@ -1753,6 +1867,7 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "" @@ -1774,6 +1889,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1804,6 +1923,14 @@ msgstr "" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1968,6 +2095,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2072,7 +2203,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -3521,6 +3653,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" -- cgit v1.2.3