From f91932d78374bec0fe6225f53a487919a956b76f Mon Sep 17 00:00:00 2001 From: Bernhard Boser Date: Wed, 11 Nov 2020 16:37:15 -0800 Subject: make translate --- locale/circuitpython.pot | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'locale') diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 274d92168..51feb16c3 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-11-24 15:40-0500\n" +"POT-Creation-Date: 2020-12-01 18:38-0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -3050,6 +3050,10 @@ msgstr "" msgid "no module named '%q'" msgstr "" +#: shared-module/msgpack/__init__.c +msgid "no packer" +msgstr "" + #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c #: shared-bindings/displayio/ParallelBus.c msgid "no reset pin available" @@ -3063,6 +3067,10 @@ msgstr "" msgid "no such attribute" msgstr "" +#: shared-module/msgpack/__init__.c +msgid "no unpacker found" +msgstr "" + #: ports/nrf/common-hal/_bleio/Connection.c msgid "non-UUID found in service_uuids_whitelist" msgstr "" -- cgit v1.2.3 From 4b710796289756cb43275f19bafa9ff806e1011e Mon Sep 17 00:00:00 2001 From: Bernhard Boser Date: Fri, 13 Nov 2020 17:00:32 -0800 Subject: update translations --- locale/circuitpython.pot | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'locale') diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 51feb16c3..163d59428 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-01 18:38-0800\n" +"POT-Creation-Date: 2020-12-01 18:39-0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -3528,6 +3528,10 @@ msgstr "" msgid "tobytes can be invoked for dense arrays only" msgstr "" +#: shared-module/msgpack/__init__.c +msgid "too big" +msgstr "" + #: shared-module/struct/__init__.c msgid "too many arguments provided with the given format" msgstr "" -- cgit v1.2.3 From b5b6b6d0f2fe669e0304521d663b16388c63b15e Mon Sep 17 00:00:00 2001 From: Bernhard Boser Date: Mon, 7 Dec 2020 15:16:16 -0800 Subject: add ExtType, update doc, add a test --- locale/circuitpython.pot | 34 ++++--- shared-bindings/msgpack/ExtType.c | 127 +++++++++++++++++++++++ shared-bindings/msgpack/ExtType.h | 40 ++++++++ shared-bindings/msgpack/__init__.c | 108 ++++++++++++++++---- shared-bindings/msgpack/__init__.h | 2 +- shared-module/msgpack/__init__.c | 199 ++++++++++++++++++++++++------------- shared-module/msgpack/__init__.h | 4 +- tests/extmod/umsgpack_pack.py | 30 ++++++ tests/extmod/umsgpack_pack.py.ext | 5 + 9 files changed, 447 insertions(+), 102 deletions(-) create mode 100644 shared-bindings/msgpack/ExtType.c create mode 100644 shared-bindings/msgpack/ExtType.h create mode 100644 tests/extmod/umsgpack_pack.py create mode 100644 tests/extmod/umsgpack_pack.py.ext (limited to 'locale') diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index e0b839ed3..979f62466 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-01 18:39-0800\n" +"POT-Creation-Date: 2020-12-07 15:35-0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -270,6 +270,10 @@ msgstr "" msgid "3-arg pow() not supported" msgstr "" +#: shared-module/msgpack/__init__.c +msgid "64 bit types" +msgstr "" + #: ports/atmel-samd/common-hal/countio/Counter.c #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c msgid "A hardware interrupt channel is already in use" @@ -2371,6 +2375,10 @@ msgstr "" msgid "circle can only be registered in one parent" msgstr "" +#: shared-bindings/msgpack/ExtType.c +msgid "code outside range 0~127" +msgstr "" + #: shared-bindings/displayio/Palette.c msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)" msgstr "" @@ -2451,6 +2459,10 @@ msgstr "" msgid "default 'except' must be last" msgstr "" +#: shared-bindings/msgpack/__init__.c +msgid "default is not a function" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "" "destination buffer must be a bytearray or array of type 'B' for bit_depth = 8" @@ -2550,6 +2562,10 @@ msgstr "" msgid "expecting key:value for dict" msgstr "" +#: shared-bindings/msgpack/__init__.c +msgid "ext_hook is not a function" +msgstr "" + #: py/argcheck.c msgid "extra keyword arguments given" msgstr "" @@ -3078,12 +3094,12 @@ msgstr "" msgid "no binding for nonlocal found" msgstr "" -#: py/builtinimport.c -msgid "no module named '%q'" +#: shared-module/msgpack/__init__.c +msgid "no default packer" msgstr "" -#: shared-module/msgpack/__init__.c -msgid "no packer" +#: py/builtinimport.c +msgid "no module named '%q'" msgstr "" #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c @@ -3099,10 +3115,6 @@ msgstr "" msgid "no such attribute" msgstr "" -#: shared-module/msgpack/__init__.c -msgid "no unpacker found" -msgstr "" - #: ports/nrf/common-hal/_bleio/Connection.c msgid "non-UUID found in service_uuids_whitelist" msgstr "" @@ -3560,10 +3572,6 @@ msgstr "" msgid "tobytes can be invoked for dense arrays only" msgstr "" -#: shared-module/msgpack/__init__.c -msgid "too big" -msgstr "" - #: shared-module/struct/__init__.c msgid "too many arguments provided with the given format" msgstr "" diff --git a/shared-bindings/msgpack/ExtType.c b/shared-bindings/msgpack/ExtType.c new file mode 100644 index 000000000..3a4eee388 --- /dev/null +++ b/shared-bindings/msgpack/ExtType.c @@ -0,0 +1,127 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Bernhard Boser + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "py/runtime.h" +#include "py/smallint.h" +#include "py/objproperty.h" +#include "shared-bindings/msgpack/ExtType.h" + +//| class ExtType: +//| """ExtType represents ext type in msgpack.""" +//| def __init__(self, code: int, data: bytes) -> None: +//| """Constructor""" +//| +//| :param int code: type code in range 0~127. +//| :param bytes data: representation. + +STATIC mp_obj_t mod_msgpack_exttype_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { + mod_msgpack_extype_obj_t *self = m_new_obj(mod_msgpack_extype_obj_t); + self->base.type = &mod_msgpack_exttype_type; + enum { ARG_code, ARG_data }; + static const mp_arg_t allowed_args[] = { + { MP_QSTR_code, MP_ARG_INT | MP_ARG_REQUIRED }, + { MP_QSTR_data, MP_ARG_OBJ | MP_ARG_REQUIRED }, + }; + mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; + mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); + + int code = args[ARG_code].u_int; + if (code < 0 || code > 127) { + mp_raise_AttributeError(translate("code outside range 0~127")); + } + self->code = code; + + mp_obj_t data = args[ARG_data].u_obj; + self->data = data; + return MP_OBJ_FROM_PTR(self); +} + + +//| code: int +//| """The type code, in range 0~127.""" +//| + +STATIC mp_obj_t mod_msgpack_exttype_get_code(mp_obj_t self_in) { + mod_msgpack_extype_obj_t *self = MP_OBJ_TO_PTR(self_in); + return MP_OBJ_NEW_SMALL_INT(self->code); +} +MP_DEFINE_CONST_FUN_OBJ_1(mod_msgpack_exttype_get_code_obj, mod_msgpack_exttype_get_code); + +STATIC mp_obj_t mod_msgpack_exttype_set_code(mp_obj_t self_in, mp_obj_t code_in) { + mod_msgpack_extype_obj_t *self = MP_OBJ_TO_PTR(self_in); + int code = mp_obj_get_int(code_in); + if (code < 0 || code > 127) { + mp_raise_AttributeError(translate("code outside range 0~127")); + } + self->code = code; + return mp_const_none; +} +MP_DEFINE_CONST_FUN_OBJ_2(mod_msgpack_exttype_set_code_obj, mod_msgpack_exttype_set_code); + +const mp_obj_property_t mod_msgpack_exttype_code_obj = { + .base.type = &mp_type_property, + .proxy = {(mp_obj_t)&mod_msgpack_exttype_get_code_obj, + (mp_obj_t)&mod_msgpack_exttype_set_code_obj, + (mp_obj_t)&mp_const_none_obj}, +}; + +//| data: bytes +//| """Data.""" +//| + +STATIC mp_obj_t mod_msgpack_exttype_get_data(mp_obj_t self_in) { + mod_msgpack_extype_obj_t *self = MP_OBJ_TO_PTR(self_in); + return self->data; +} +MP_DEFINE_CONST_FUN_OBJ_1(mod_msgpack_exttype_get_data_obj, mod_msgpack_exttype_get_data); + +STATIC mp_obj_t mod_msgpack_exttype_set_data(mp_obj_t self_in, mp_obj_t data_in) { + mod_msgpack_extype_obj_t *self = MP_OBJ_TO_PTR(self_in); + self->data = data_in; + return mp_const_none; +} +MP_DEFINE_CONST_FUN_OBJ_2(mod_msgpack_exttype_set_data_obj, mod_msgpack_exttype_set_data); + +const mp_obj_property_t mod_msgpack_exttype_data_obj = { + .base.type = &mp_type_property, + .proxy = {(mp_obj_t)&mod_msgpack_exttype_get_data_obj, + (mp_obj_t)&mod_msgpack_exttype_set_data_obj, + (mp_obj_t)&mp_const_none_obj}, +}; + +STATIC mp_rom_map_elem_t mod_msgpack_exttype_locals_dict_table[] = { + // Properties + { MP_ROM_QSTR(MP_QSTR_code), MP_ROM_PTR(&mod_msgpack_exttype_code_obj) }, + { MP_ROM_QSTR(MP_QSTR_data), MP_ROM_PTR(&mod_msgpack_exttype_data_obj) }, +}; +STATIC MP_DEFINE_CONST_DICT(mod_msgpack_exttype_locals_dict, mod_msgpack_exttype_locals_dict_table); + +const mp_obj_type_t mod_msgpack_exttype_type = { + { &mp_type_type }, + .name = MP_QSTR_ExtType, + .make_new = mod_msgpack_exttype_make_new, + .locals_dict = (mp_obj_dict_t*)&mod_msgpack_exttype_locals_dict, +}; diff --git a/shared-bindings/msgpack/ExtType.h b/shared-bindings/msgpack/ExtType.h new file mode 100644 index 000000000..64173b221 --- /dev/null +++ b/shared-bindings/msgpack/ExtType.h @@ -0,0 +1,40 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Bernhard Boser + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_MSGPACK_EXTTYPE___INIT___H +#define MICROPY_INCLUDED_SHARED_BINDINGS_MSGPACK_EXTTYPE___INIT___H + +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; + int32_t code; + mp_obj_t data; +} mod_msgpack_extype_obj_t; + +extern const mp_obj_type_t mod_msgpack_exttype_type; + +#endif // MICROPY_INCLUDED_SHARED_BINDINGS_MSGPACK_EXTTYPE___INIT___H diff --git a/shared-bindings/msgpack/__init__.c b/shared-bindings/msgpack/__init__.c index a222177f7..fcb86ac6c 100644 --- a/shared-bindings/msgpack/__init__.c +++ b/shared-bindings/msgpack/__init__.c @@ -24,15 +24,24 @@ * THE SOFTWARE. */ +#include +#include "py/obj.h" +#include "py/runtime.h" #include "shared-bindings/msgpack/__init__.h" #include "shared-module/msgpack/__init__.h" +#include "shared-bindings/msgpack/ExtType.h" + +#define MP_OBJ_IS_METH(o) (MP_OBJ_IS_OBJ(o) && (((mp_obj_base_t*)MP_OBJ_TO_PTR(o))->type->name == MP_QSTR_bound_method)) //| """Pack object in msgpack format //| //| The msgpack format is similar to json, except that the encoded data is binary. -//| See https://msgpack.org for details. +//| See https://msgpack.org for details. The module implements a subset of the cpython +//| module msgpack-python. +//| +//| Not implemented: 64-bit int, uint, float. //| -//| Example: +//| Example 1: //| import msgpack //| from io import BytesIO //| @@ -41,33 +50,98 @@ //| b.seek(0) //| print(msgpack.unpack(b))""" //| - -//| def pack(obj: Any, buffer: WriteableBuffer) -> None: -//| """Pack obj to stream.""" -//| ... +//| Example 2: handling objects +//| +//| from msgpack import pack, unpack, ExtType +//| from io import BytesIO +//| +//| class MyClass: +//| def __init__(self, val): +//| self.value = val +//| def __str__(self): +//| return str(self.value) +//| +//| data = MyClass(b'my_value') +//| +//| def encoder(obj): +//| if isinstance(obj, MyClass): +//| return ExtType(1, obj.value) +//| return f"no encoder for {obj}" //| +//| def decoder(code, data): +//| if code == 1: +//| return MyClass(data) +//| return f"no decoder for type {code}" +//| +//| buffer = BytesIO() +//| pack(data, buffer, default=encoder) +//| buffer.seek(0) +//| decoded = unpack(buffer, ext_hook=decoder) +//| print(f"{data} -> {buffer.getvalue()} -> {decoded}") +//| """ + + +//| def pack(obj: object, buffer: WriteableBuffer, *, default: Function=None) -> None: +//| """Ouput object to buffer in msgpack format. +//| :param object obj: Object to convert to msgpack format. +//| :param ~_typing.WriteableBuffer buffer: buffer to write into +//| :param Optional[~_typing.Function] default: +//| function called for python objects that do not have +//| a representation in msgpack format. +//| """ + +STATIC mp_obj_t mod_msgpack_pack(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { + enum { ARG_obj, ARG_buffer, ARG_default }; + STATIC const mp_arg_t allowed_args[] = { + { MP_QSTR_obj, MP_ARG_REQUIRED | MP_ARG_OBJ }, + { MP_QSTR_buffer, MP_ARG_REQUIRED | MP_ARG_OBJ }, + { MP_QSTR_default, MP_ARG_KW_ONLY | MP_ARG_OBJ, { .u_obj = mp_const_none } }, + }; + mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; + mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); -STATIC mp_obj_t mod_msgpack_pack(mp_obj_t obj, mp_obj_t stream_obj) { - common_hal_msgpack_pack(obj, stream_obj); + mp_obj_t handler = args[ARG_default].u_obj; + if (handler != mp_const_none && !MP_OBJ_IS_FUN(handler) && !MP_OBJ_IS_METH(handler)) { + mp_raise_ValueError(translate("default is not a function")); + } + + common_hal_msgpack_pack(args[ARG_obj].u_obj, args[ARG_buffer].u_obj, handler); return mp_const_none; } -STATIC MP_DEFINE_CONST_FUN_OBJ_2(mod_msgpack_pack_obj, mod_msgpack_pack); +MP_DEFINE_CONST_FUN_OBJ_KW(mod_msgpack_pack_obj, 1, mod_msgpack_pack); +//| def unpack(buffer: ReadableBuffer, *, ext_hook: Function=None, use_list: bool=True) -> object: +//| """Unpack and return one object from buffer. +//| :param ~_typing.ReadableBuffer buffer: buffer to read from +//| :param Optional[~_typing.Function] ext_hook: function called for objects in +//| msgpack ext format. +//| :param Optional[bool] use_list: return array as list or tuple (use_list=False). +//| :return object: object read from buffer. +//| """ -//| def unpack(buffer: ReadableBuffer) -> Any: -//| """Unpack and return one object (in msgpack format) from stream. -//| Call repeatedly to read multiple objects from the stream.""" -//| ... -//| +STATIC mp_obj_t mod_msgpack_unpack(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { + enum { ARG_buffer, ARG_ext_hook, ARG_use_list }; + STATIC const mp_arg_t allowed_args[] = { + { MP_QSTR_buffer, MP_ARG_REQUIRED | MP_ARG_OBJ, }, + { MP_QSTR_ext_hook, MP_ARG_KW_ONLY | MP_ARG_OBJ, { .u_obj = mp_const_none } }, + { MP_QSTR_use_list, MP_ARG_KW_ONLY | MP_ARG_BOOL, { .u_bool = true } }, + }; + mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; + mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); + + mp_obj_t hook = args[ARG_ext_hook].u_obj; + if (hook != mp_const_none && !MP_OBJ_IS_FUN(hook) && !MP_OBJ_IS_METH(hook)) { + mp_raise_ValueError(translate("ext_hook is not a function")); + } -STATIC mp_obj_t mod_msgpack_unpack(mp_obj_t stream_obj) { - return common_hal_msgpack_unpack(stream_obj); + return common_hal_msgpack_unpack(args[ARG_buffer].u_obj, hook, args[ARG_use_list].u_bool); } -STATIC MP_DEFINE_CONST_FUN_OBJ_1(mod_msgpack_unpack_obj, mod_msgpack_unpack); +MP_DEFINE_CONST_FUN_OBJ_KW(mod_msgpack_unpack_obj, 1, mod_msgpack_unpack); STATIC const mp_rom_map_elem_t msgpack_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_msgpack) }, + { MP_ROM_QSTR(MP_QSTR_ExtType), MP_ROM_PTR(&mod_msgpack_exttype_type) }, { MP_ROM_QSTR(MP_QSTR_pack), MP_ROM_PTR(&mod_msgpack_pack_obj) }, { MP_ROM_QSTR(MP_QSTR_unpack), MP_ROM_PTR(&mod_msgpack_unpack_obj) }, }; diff --git a/shared-bindings/msgpack/__init__.h b/shared-bindings/msgpack/__init__.h index 4836cc62e..a02ead0bd 100644 --- a/shared-bindings/msgpack/__init__.h +++ b/shared-bindings/msgpack/__init__.h @@ -29,6 +29,6 @@ #include "py/obj.h" -// Nothing now. +// nothing for now #endif // MICROPY_INCLUDED_SHARED_BINDINGS_MSGPACK___INIT___H diff --git a/shared-module/msgpack/__init__.c b/shared-module/msgpack/__init__.c index 5bc7d1f61..204312109 100644 --- a/shared-module/msgpack/__init__.c +++ b/shared-module/msgpack/__init__.c @@ -27,6 +27,7 @@ #include #include +#include "py/obj.h" #include "py/binary.h" #include "py/objarray.h" #include "py/objlist.h" @@ -36,6 +37,7 @@ #include "py/stream.h" #include "supervisor/shared/translate.h" +#include "shared-bindings/msgpack/ExtType.h" //////////////////////////////////////////////////////////////// // stream management @@ -56,7 +58,7 @@ STATIC msgpack_stream_t get_stream(mp_obj_t stream_obj, int flags) { //////////////////////////////////////////////////////////////// // readers -STATIC void read_bytes(msgpack_stream_t *s, void *buf, mp_uint_t size) { +STATIC void read(msgpack_stream_t *s, void *buf, mp_uint_t size) { if (size == 0) return; mp_uint_t ret = s->read(s->stream_obj, buf, size, &s->errcode); if (s->errcode != 0) { @@ -69,13 +71,13 @@ STATIC void read_bytes(msgpack_stream_t *s, void *buf, mp_uint_t size) { STATIC uint8_t read1(msgpack_stream_t *s) { uint8_t res = 0; - read_bytes(s, &res, 1); + read(s, &res, 1); return res; } STATIC uint16_t read2(msgpack_stream_t *s) { uint16_t res = 0; - read_bytes(s, &res, 2); + read(s, &res, 2); int n = 1; if (*(char *)&n == 1) res = __builtin_bswap16(res); return res; @@ -83,19 +85,18 @@ STATIC uint16_t read2(msgpack_stream_t *s) { STATIC uint32_t read4(msgpack_stream_t *s) { uint32_t res = 0; - read_bytes(s, &res, 4); + read(s, &res, 4); int n = 1; if (*(char *)&n == 1) res = __builtin_bswap32(res); return res; } STATIC size_t read_size(msgpack_stream_t *s, uint8_t len_index) { - size_t res = 0; + size_t res; switch (len_index) { case 0: res = (size_t)read1(s); break; case 1: res = (size_t)read2(s); break; case 2: res = (size_t)read4(s); break; - default: mp_raise_ValueError(translate("too big")); } return res; } @@ -103,7 +104,7 @@ STATIC size_t read_size(msgpack_stream_t *s, uint8_t len_index) { //////////////////////////////////////////////////////////////// // writers -STATIC void write_bytes(msgpack_stream_t *s, const void *buf, mp_uint_t size) { +STATIC void write(msgpack_stream_t *s, const void *buf, mp_uint_t size) { mp_uint_t ret = s->write(s->stream_obj, buf, size, &s->errcode); if (s->errcode != 0) { mp_raise_OSError(s->errcode); @@ -114,19 +115,19 @@ STATIC void write_bytes(msgpack_stream_t *s, const void *buf, mp_uint_t size) { } STATIC void write1(msgpack_stream_t *s, uint8_t obj) { - write_bytes(s, &obj, 1); + write(s, &obj, 1); } STATIC void write2(msgpack_stream_t *s, uint16_t obj) { int n = 1; if (*(char *)&n == 1) obj = __builtin_bswap16(obj); - write_bytes(s, &obj, 2); + write(s, &obj, 2); } STATIC void write4(msgpack_stream_t *s, uint32_t obj) { int n = 1; if (*(char *)&n == 1) obj = __builtin_bswap32(obj); - write_bytes(s, &obj, 4); + write(s, &obj, 4); } // compute and write msgpack size code (array structures) @@ -178,15 +179,34 @@ STATIC void pack_int(msgpack_stream_t *s, int32_t x) { } } -void pack_bin(msgpack_stream_t *s, const uint8_t* data, size_t len) { +STATIC void pack_bin(msgpack_stream_t *s, const uint8_t* data, size_t len) { write_size(s, 0xc4, len); for (size_t i=0; idata, &bufinfo, MP_BUFFER_READ); + pack_ext(s, ext->code, bufinfo.buf, bufinfo.len); } else if (MP_OBJ_IS_TYPE(obj, &mp_type_bytes)) { // bytes mp_buffer_info_t bufinfo; @@ -243,14 +268,14 @@ void pack(mp_obj_t obj, msgpack_stream_t *s) { mp_obj_tuple_t *self = MP_OBJ_TO_PTR(obj); pack_array(s, self->len); for (size_t i=0; ilen; i++) { - pack(self->items[i], s); + pack(self->items[i], s, default_handler); } } else if (MP_OBJ_IS_TYPE(obj, &mp_type_list)) { // list (layout differs from tuple) mp_obj_list_t *self = MP_OBJ_TO_PTR(obj); pack_array(s, self->len); for (size_t i=0; ilen; i++) { - pack(self->items[i], s); + pack(self->items[i], s, default_handler); } } else if (MP_OBJ_IS_TYPE(obj, &mp_type_dict)) { // dict @@ -259,8 +284,8 @@ void pack(mp_obj_t obj, msgpack_stream_t *s) { size_t cur = 0; mp_map_elem_t *next = NULL; while ((next = dict_iter_next(self, &cur)) != NULL) { - pack(next->key, s); - pack(next->value, s); + pack(next->key, s, default_handler); + pack(next->value, s, default_handler); } } else if (mp_obj_is_float(obj)) { union Float { mp_float_t f; uint32_t u; }; @@ -275,14 +300,60 @@ void pack(mp_obj_t obj, msgpack_stream_t *s) { } else if (obj == mp_const_true) { write1(s, 0xc3); } else { - mp_raise_ValueError(translate("no packer")); + if (default_handler != mp_const_none) { + // set default_handler to mp_const_none to avoid infinite recursion + // this also precludes some valid outputs + pack(mp_call_function_1(default_handler, obj), s, mp_const_none); + } else { + mp_raise_ValueError(translate("no default packer")); + } } } //////////////////////////////////////////////////////////////// // unpacker -mp_obj_t unpack(msgpack_stream_t *s) { +STATIC mp_obj_t unpack(msgpack_stream_t *s, mp_obj_t ext_hook, bool use_list); + +STATIC mp_obj_t unpack_array_elements(msgpack_stream_t *s, size_t size, mp_obj_t ext_hook, bool use_list) { + if (use_list) { + mp_obj_list_t *t = MP_OBJ_TO_PTR(mp_obj_new_list(size, NULL)); + for (size_t i=0; iitems[i] = unpack(s, ext_hook, use_list); + } + return MP_OBJ_FROM_PTR(t); + } else { + mp_obj_tuple_t *t = MP_OBJ_TO_PTR(mp_obj_new_tuple(size, NULL)); + for (size_t i=0; iitems[i] = unpack(s, ext_hook, use_list); + } + return MP_OBJ_FROM_PTR(t); + } +} + +STATIC mp_obj_t unpack_bytes(msgpack_stream_t *s, size_t size) { + vstr_t vstr; + vstr_init_len(&vstr, size); + byte *p = (byte*)vstr.buf; + read(s, p, size); + return mp_obj_new_str_from_vstr(&mp_type_bytes, &vstr); +} + +STATIC mp_obj_t unpack_ext(msgpack_stream_t *s, size_t size, mp_obj_t ext_hook) { + int8_t code = read1(s); + mp_obj_t data = unpack_bytes(s, size); + if (ext_hook != mp_const_none) { + return mp_call_function_2(ext_hook, MP_OBJ_NEW_SMALL_INT(code), data); + } else { + mod_msgpack_extype_obj_t *o = m_new_obj(mod_msgpack_extype_obj_t); + o->base.type = &mod_msgpack_exttype_type; + o->code = code; + o->data = data; + return MP_OBJ_FROM_PTR(o); + } +} + +STATIC mp_obj_t unpack(msgpack_stream_t *s, mp_obj_t ext_hook, bool use_list) { uint8_t code = read1(s); if (((code & 0b10000000) == 0) || ((code & 0b11100000) == 0b11100000)) { // int @@ -293,24 +364,19 @@ mp_obj_t unpack(msgpack_stream_t *s) { size_t len = code & 0b11111; // allocate on stack; len < 32 char str[len]; - read_bytes(s, &str, len); + read(s, &str, len); return mp_obj_new_str(str, len); } if ((code & 0b11110000) == 0b10010000) { - // array (tuple) - size_t len = code & 0b1111; - mp_obj_tuple_t *t = MP_OBJ_TO_PTR(mp_obj_new_tuple(len, NULL)); - for (size_t i=0; iitems[i] = unpack(s); - } - return MP_OBJ_FROM_PTR(t); + // array (list / tuple) + return unpack_array_elements(s, code & 0b1111, ext_hook, use_list); } if ((code & 0b11110000) == 0b10000000) { // map (dict) size_t len = code & 0b1111; mp_obj_dict_t *d = MP_OBJ_TO_PTR(mp_obj_new_dict(len)); for (size_t i=0; iitems[i] = unpack(s); - } - return MP_OBJ_FROM_PTR(t); + size_t size = read_size(s, code - 0xdc + 1); + return unpack_array_elements(s, size, ext_hook, use_list); } - case 0xc1: // never used - case 0xc7: // ext 8 - case 0xc8: // ext 16 - case 0xc9: // ext 32 - case 0xcb: // float 64 - case 0xcf: // uint 64 - case 0xd3: // int 64 case 0xd4: // fixenxt 1 + return unpack_ext(s, 1, ext_hook); case 0xd5: // fixenxt 2 + return unpack_ext(s, 2, ext_hook); case 0xd6: // fixenxt 4 + return unpack_ext(s, 4, ext_hook); case 0xd7: // fixenxt 8 + return unpack_ext(s, 8, ext_hook); case 0xd8: // fixenxt 16 + return unpack_ext(s, 16, ext_hook); + case 0xc7: // ext 8 + case 0xc8: // ext 16 + case 0xc9: + // ext 8, 16, 32 + return unpack_ext(s, read_size(s, code-0xc7), ext_hook); + case 0xc1: // never used + case 0xcb: // float 64 + case 0xcf: // uint 64 + case 0xd3: // int 64 default: - mp_raise_ValueError(translate("no unpacker found")); + mp_raise_NotImplementedError(translate("64 bit types")); } } -void common_hal_msgpack_pack(mp_obj_t obj, mp_obj_t stream_obj) { +void common_hal_msgpack_pack(mp_obj_t obj, mp_obj_t stream_obj, mp_obj_t default_handler) { msgpack_stream_t stream = get_stream(stream_obj, MP_STREAM_OP_WRITE); - pack(obj, &stream); + pack(obj, &stream, default_handler); } -mp_obj_t common_hal_msgpack_unpack(mp_obj_t stream_obj) { +mp_obj_t common_hal_msgpack_unpack(mp_obj_t stream_obj, mp_obj_t ext_hook, bool use_list) { msgpack_stream_t stream = get_stream(stream_obj, MP_STREAM_OP_WRITE); - return unpack(&stream); + return unpack(&stream, ext_hook, use_list); } diff --git a/shared-module/msgpack/__init__.h b/shared-module/msgpack/__init__.h index 0a5e7852a..88b4809f9 100644 --- a/shared-module/msgpack/__init__.h +++ b/shared-module/msgpack/__init__.h @@ -28,7 +28,7 @@ #include "py/stream.h" -void common_hal_msgpack_pack(mp_obj_t obj, mp_obj_t stream_obj); -mp_obj_t common_hal_msgpack_unpack(mp_obj_t stream_obj); +void common_hal_msgpack_pack(mp_obj_t obj, mp_obj_t stream_obj, mp_obj_t default_handler); +mp_obj_t common_hal_msgpack_unpack(mp_obj_t stream_obj, mp_obj_t ext_hook, bool use_list); #endif diff --git a/tests/extmod/umsgpack_pack.py b/tests/extmod/umsgpack_pack.py new file mode 100644 index 000000000..d9f0005e1 --- /dev/null +++ b/tests/extmod/umsgpack_pack.py @@ -0,0 +1,30 @@ +try: + from uio import BytesIO + import umsgpack as msgpack +except: + try: + from io import BytesIO + import msgpack + except ImportError: + print("SKIP") + raise SystemExit + +b = BytesIO() +msgpack.pack(False, s) +print(b.getvalue()) + +b = BytesIO() +msgpack.pack({"a": (-1, 0, 2, [3, None], 128)}, b) +print(b.getvalue()) + +# pack to a small-int not allowed +try: + msgpack.pack(123, 1) +except (AttributeError, OSError): # CPython and uPy have different errors + print('Exception') + +# pack to an object not allowed +try: + msgpack.pack(123, {}) +except (AttributeError, OSError): # CPython and uPy have different errors + print('Exception') diff --git a/tests/extmod/umsgpack_pack.py.ext b/tests/extmod/umsgpack_pack.py.ext new file mode 100644 index 000000000..2f966be06 --- /dev/null +++ b/tests/extmod/umsgpack_pack.py.ext @@ -0,0 +1,5 @@ +b'\xc2' +b'\x82\xa1a\x96\xff\x00\x02\x92\x03\xc0\xd1\x00\x80\xc4\x07abcdefg\xa1b\xd4\x05x' +Exception ExtType +Exception to int +Exception to object -- cgit v1.2.3 From 534b48fcfe688d88455bd8421fa02255ecc8508b Mon Sep 17 00:00:00 2001 From: Bernhard Boser Date: Mon, 7 Dec 2020 16:08:16 -0800 Subject: remove a ~ from doc that causes an error; add ExtType.c to circuitpy_defns.mk --- locale/circuitpython.pot | 2 +- py/circuitpy_defns.mk | 1 + shared-bindings/msgpack/ExtType.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) (limited to 'locale') diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 979f62466..7acfbe1de 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-07 15:35-0800\n" +"POT-Creation-Date: 2020-12-07 16:05-0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" diff --git a/py/circuitpy_defns.mk b/py/circuitpy_defns.mk index f13f69bcf..39ff2e380 100644 --- a/py/circuitpy_defns.mk +++ b/py/circuitpy_defns.mk @@ -407,6 +407,7 @@ $(filter $(SRC_PATTERNS), \ microcontroller/ResetReason.c \ microcontroller/RunMode.c \ msgpack/__init__.c \ + msgpack/ExtType.c \ supervisor/RunReason.c \ ) diff --git a/shared-bindings/msgpack/ExtType.c b/shared-bindings/msgpack/ExtType.c index 3a4eee388..dfccbd3ef 100644 --- a/shared-bindings/msgpack/ExtType.c +++ b/shared-bindings/msgpack/ExtType.c @@ -34,7 +34,7 @@ //| def __init__(self, code: int, data: bytes) -> None: //| """Constructor""" //| -//| :param int code: type code in range 0~127. +//| :param int code: type code in range 0 .. 127. //| :param bytes data: representation. STATIC mp_obj_t mod_msgpack_exttype_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { -- cgit v1.2.3 From 9d5587fb084c3eb8ebf4f6fdd20c2b88607ad261 Mon Sep 17 00:00:00 2001 From: oon arfiandwi Date: Sat, 2 Jan 2021 04:36:18 +0000 Subject: Translated using Weblate (Indonesian) Currently translated at 47.2% (421 of 891 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/id/ --- locale/ID.po | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'locale') diff --git a/locale/ID.po b/locale/ID.po index ca26f01bd..5f80f1f14 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-12-22 22:54+0530\n" -"PO-Revision-Date: 2020-12-30 22:25+0000\n" +"PO-Revision-Date: 2021-01-03 05:29+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" "Language: ID\n" @@ -1850,11 +1850,11 @@ msgstr "Tingkat sampel dari sampel tidak cocok dengan mixer" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's signedness does not match the mixer's" -msgstr "" +msgstr "signedness dari sampel tidak cocok dengan mixer" #: shared-bindings/displayio/TileGrid.c msgid "Tile height must exactly divide bitmap height" -msgstr "" +msgstr "Tinggi tile harus persis membagi tinggi bitmap" #: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c msgid "Tile index out of bounds" @@ -1909,7 +1909,7 @@ msgstr "" #: py/obj.c msgid "Traceback (most recent call last):\n" -msgstr "" +msgstr "Traceback (bagian terakhir dari panggilan terkini):\n" #: shared-bindings/time/__init__.c msgid "Tuple or struct_time argument required" @@ -1945,15 +1945,15 @@ msgstr "Kesalahan USB" #: shared-bindings/_bleio/UUID.c msgid "UUID integer value must be 0-0xffff" -msgstr "" +msgstr "Nilai integer UUID harus 0-0xffff" #: shared-bindings/_bleio/UUID.c msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" -msgstr "" +msgstr "String UUID bukan 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" #: shared-bindings/_bleio/UUID.c msgid "UUID value is not str, int or byte buffer" -msgstr "" +msgstr "Nilai UUID bukan str, int atau byte buffer" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c @@ -1967,7 +1967,7 @@ msgstr "" #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" -msgstr "" +msgstr "Tidak dapat menemukan Tampilan I2C di %x" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c @@ -1976,15 +1976,15 @@ msgstr "Tidak dapat menemukan GCLK yang kosong" #: py/parse.c msgid "Unable to init parser" -msgstr "" +msgstr "Tidak dapat memulai parser" #: shared-module/displayio/OnDiskBitmap.c msgid "Unable to read color palette data" -msgstr "" +msgstr "Tidak dapat membaca data palet warna" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." -msgstr "" +msgstr "Tidak dapat menulis ke nvm." #: shared-bindings/alarm/SleepMemory.c msgid "Unable to write to sleep_memory." @@ -1992,7 +1992,7 @@ msgstr "" #: ports/nrf/common-hal/_bleio/UUID.c msgid "Unexpected nrfx uuid type" -msgstr "" +msgstr "Tipe urf nrfx tak sesuai" #: ports/esp32s2/common-hal/socketpool/Socket.c #, c-format -- cgit v1.2.3 From 4135ccb100779011ee9f11e6e68750f00c362aa7 Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Mon, 4 Jan 2021 21:25:02 +0100 Subject: Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 32 ++++++++++++++++++-------------- locale/cs.po | 32 ++++++++++++++++++-------------- locale/de_DE.po | 40 +++++++++++++++++++++++++--------------- locale/el.po | 32 ++++++++++++++++++-------------- locale/es.po | 43 ++++++++++++++++++++++++++++--------------- locale/fil.po | 35 +++++++++++++++++++++-------------- locale/fr.po | 46 +++++++++++++++++++++++++++++++--------------- locale/hi.po | 32 ++++++++++++++++++-------------- locale/it_IT.po | 35 +++++++++++++++++++++-------------- locale/ja.po | 32 ++++++++++++++++++-------------- locale/ko.po | 32 ++++++++++++++++++-------------- locale/nl.po | 43 ++++++++++++++++++++++++++++--------------- locale/pl.po | 35 +++++++++++++++++++++-------------- locale/pt_BR.po | 46 +++++++++++++++++++++++++++++++--------------- locale/sv.po | 43 ++++++++++++++++++++++++++++--------------- locale/zh_Latn_pinyin.po | 40 +++++++++++++++++++++++++--------------- 16 files changed, 367 insertions(+), 231 deletions(-) (limited to 'locale') diff --git a/locale/ID.po b/locale/ID.po index 5f80f1f14..9fc91305e 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2021-01-03 05:29+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" @@ -1903,10 +1903,6 @@ msgid "Total data to write is larger than outgoing_packet_length" msgstr "" "Total data yang akan ditulis lebih besar daripada outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (bagian terakhir dari panggilan terkini):\n" @@ -2550,6 +2546,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2860,7 +2860,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3103,6 +3103,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3333,10 +3337,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3681,6 +3681,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3690,6 +3694,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3698,10 +3706,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index 88380fbea..c72a781be 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-12-04 18:33+0000\n" "Last-Translator: vkuthan \n" "Language-Team: LANGUAGE \n" @@ -1865,10 +1865,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "" @@ -2504,6 +2500,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2814,7 +2814,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3057,6 +3057,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3286,10 +3290,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3633,6 +3633,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3642,6 +3646,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3650,10 +3658,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 39e1071f9..0dd711999 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-11-26 03:11+0000\n" "Last-Translator: Daniel Bravo Darriba \n" "Language: de_DE\n" @@ -1905,10 +1905,6 @@ msgstr "" "Die Gesamtzahl der zu schreibenden Daten ist größer als " "outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Zurückverfolgung (jüngste Aufforderung zuletzt):\n" @@ -2569,6 +2565,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "Dezimalzahlen nicht unterstützt" @@ -2882,8 +2882,8 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "Das Eingabeargument muss eine Ganzzahl oder ein 2-Tupel sein" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3131,6 +3131,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3362,10 +3366,6 @@ msgstr "Operanden konnten nicht zusammen gesendet werden" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "Die Operation ist für ndarrays nicht implementiert" @@ -3714,6 +3714,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "zu viele Argumente mit dem angegebenen Format" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "zu viele Indizes" @@ -3723,6 +3727,10 @@ msgstr "zu viele Indizes" msgid "too many values to unpack (expected %d)" msgstr "zu viele Werte zum Auspacken (erwartet %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3731,10 +3739,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "Tupelindex außerhalb des Bereichs" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tupel/list hat falsche Länge" @@ -3953,6 +3957,12 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "Das Eingabeargument muss eine Ganzzahl oder ein 2-Tupel sein" + +#~ msgid "tuple index out of range" +#~ msgstr "Tupelindex außerhalb des Bereichs" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/el.po b/locale/el.po index 21a0942a6..acf4241d1 100644 --- a/locale/el.po +++ b/locale/el.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -1862,10 +1862,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "" @@ -2501,6 +2497,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2811,7 +2811,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3054,6 +3054,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3283,10 +3287,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3630,6 +3630,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3639,6 +3643,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3647,10 +3655,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "" diff --git a/locale/es.po b/locale/es.po index bac7d2840..90fbc5631 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-12-30 22:25+0000\n" "Last-Translator: Hugo Dahl \n" "Language-Team: \n" @@ -1912,10 +1912,6 @@ msgid "Total data to write is larger than outgoing_packet_length" msgstr "" "Los datos totales a escribir son más grandes que outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (ultima llamada reciente):\n" @@ -2567,6 +2563,10 @@ msgstr "los datos deben permitir iteración" msgid "data must be of equal length" msgstr "los datos deben ser de igual tamaño" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "números decimales no soportados" @@ -2879,8 +2879,8 @@ msgid "input and output shapes are not compatible" msgstr "Formas de entrada y salida no son compactibles" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "el argumento de entrada debe ser un entero o una tupla de par" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3125,6 +3125,10 @@ msgstr "maxiter tiene que ser > 0" msgid "maxiter should be > 0" msgstr "maxiter debe ser > 0" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3357,10 +3361,6 @@ msgstr "los operandos no se pueden transmitir juntos" msgid "operation is implemented for 1D Boolean arrays only" msgstr "operación solo está implementada para arrays booleanos de 1D" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "operación no está implementada para arrays aplanados" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "la operación no está implementada para ndarrays" @@ -3707,6 +3707,10 @@ msgstr "tobytes solo pueden ser invocados por arrays densos" msgid "too many arguments provided with the given format" msgstr "demasiados argumentos provistos con el formato dado" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "demasiados índices" @@ -3716,6 +3720,10 @@ msgstr "demasiados índices" msgid "too many values to unpack (expected %d)" msgstr "demasiados valores para descomprimir (%d esperado)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapz está definido para arreglos 1D de igual tamaño" @@ -3724,10 +3732,6 @@ msgstr "trapz está definido para arreglos 1D de igual tamaño" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "tuple index fuera de rango" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tupla/lista tiene una longitud incorrecta" @@ -3942,6 +3946,15 @@ msgstr "zi debe ser de tipo flotante" msgid "zi must be of shape (n_section, 2)" msgstr "zi debe ser una forma (n_section,2)" +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "el argumento de entrada debe ser un entero o una tupla de par" + +#~ msgid "operation is not implemented for flattened array" +#~ msgstr "operación no está implementada para arrays aplanados" + +#~ msgid "tuple index out of range" +#~ msgstr "tuple index fuera de rango" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/fil.po b/locale/fil.po index 86386cf1f..d82731e31 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy \n" "Language-Team: fil\n" @@ -1882,10 +1882,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (pinakahuling huling tawag): \n" @@ -2538,6 +2534,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "decimal numbers hindi sinusuportahan" @@ -2854,7 +2854,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3101,6 +3101,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3331,10 +3335,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3683,6 +3683,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "masyadong maraming mga argumento na ibinigay sa ibinigay na format" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3692,6 +3696,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "masyadong maraming values para i-unpact (umaasa ng %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3700,10 +3708,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "indeks ng tuple wala sa sakop" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "mali ang haba ng tuple/list" @@ -3920,6 +3924,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "tuple index out of range" +#~ msgstr "indeks ng tuple wala sa sakop" + #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload." #~ msgstr "" #~ "Pindutin ang anumang key upang pumasok sa REPL. Gamitin ang CTRL-D upang " diff --git a/locale/fr.po b/locale/fr.po index c25da7888..187ee6f92 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2021-01-01 04:29+0000\n" "Last-Translator: Hugo Dahl \n" "Language: fr\n" @@ -1931,10 +1931,6 @@ msgid "Total data to write is larger than outgoing_packet_length" msgstr "" "Le nombre total de données à écrire est supérieur à outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "TouchAlarm n'est pas disponible en mode someil léger" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (appels les plus récents en dernier) :\n" @@ -2597,6 +2593,10 @@ msgstr "les données doivent être les objets iterables" msgid "data must be of equal length" msgstr "les données doivent être de longueur égale" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "nombres décimaux non supportés" @@ -2912,8 +2912,8 @@ msgid "input and output shapes are not compatible" msgstr "les formes d'entrée et de sortie ne sont pas compatibles" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "l'argument d'entrée doit être un entier ou un tuple 2" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3159,6 +3159,10 @@ msgstr "maxiter doit être > 0" msgid "maxiter should be > 0" msgstr "maxiter devrait être > 0" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3390,10 +3394,6 @@ msgstr "les opérandes ne pouvaient pas être diffusés ensemble" msgid "operation is implemented for 1D Boolean arrays only" msgstr "opération implémentée que pour des tableaux 1D booléennes" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "l'opération n'est pas implémentée pour un tableau applatit" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "l'opération n'est pas implémentée sur les ndarrays" @@ -3743,6 +3743,10 @@ msgstr "tobytes ne peut être appelé que pour des tableaux dense" msgid "too many arguments provided with the given format" msgstr "trop d'arguments fournis avec ce format" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "trop d'indices" @@ -3752,6 +3756,10 @@ msgstr "trop d'indices" msgid "too many values to unpack (expected %d)" msgstr "trop de valeur à dégrouper (%d attendues)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapz n'est défini que pour des tableaux 1D de longueur égale" @@ -3760,10 +3768,6 @@ msgstr "trapz n'est défini que pour des tableaux 1D de longueur égale" msgid "trigger level must be 0 or 1" msgstr "niveau du déclencheur doit être 0 ou 1" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "index du tuple hors de portée" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tuple/liste a une mauvaise longueur" @@ -3978,6 +3982,18 @@ msgstr "zi doit être de type float" msgid "zi must be of shape (n_section, 2)" msgstr "zi doit être de forme (n_section, 2)" +#~ msgid "TouchAlarm not available in light sleep" +#~ msgstr "TouchAlarm n'est pas disponible en mode someil léger" + +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "l'argument d'entrée doit être un entier ou un tuple 2" + +#~ msgid "operation is not implemented for flattened array" +#~ msgstr "l'opération n'est pas implémentée pour un tableau applatit" + +#~ msgid "tuple index out of range" +#~ msgstr "index du tuple hors de portée" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/hi.po b/locale/hi.po index 34d0238f6..ba82ca895 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -1862,10 +1862,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "" @@ -2501,6 +2497,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2811,7 +2811,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3054,6 +3054,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3283,10 +3287,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3630,6 +3630,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3639,6 +3643,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3647,10 +3655,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index dbefb87a8..c0b2aa931 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin \n" "Language-Team: \n" @@ -1894,10 +1894,6 @@ msgstr "Troppi schermi" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (chiamata più recente per ultima):\n" @@ -2541,6 +2537,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "numeri decimali non supportati" @@ -2856,7 +2856,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3104,6 +3104,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3337,10 +3341,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3691,6 +3691,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "troppi argomenti forniti con il formato specificato" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3700,6 +3704,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "troppi valori da scompattare (%d attesi)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3708,10 +3716,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "indice della tupla fuori intervallo" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tupla/lista ha la lunghezza sbagliata" @@ -3928,6 +3932,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "tuple index out of range" +#~ msgstr "indice della tupla fuori intervallo" + #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload." #~ msgstr "" #~ "Premi un qualunque tasto per entrare nel REPL. Usa CTRL-D per ricaricare." diff --git a/locale/ja.po b/locale/ja.po index 6ccdc158e..770752e99 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-11-27 18:34+0000\n" "Last-Translator: sporeball \n" "Language-Team: none\n" @@ -1884,10 +1884,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "トレースバック（最新の呼び出しが末尾）:\n" @@ -2526,6 +2522,10 @@ msgstr "dataはイテレート可能でなければなりません" msgid "data must be of equal length" msgstr "dataは同じ長さでなければなりません" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2839,7 +2839,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3082,6 +3082,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3311,10 +3315,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "この演算はndarray上で実装されていません" @@ -3661,6 +3661,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "指定された書式に対して引数が多すぎます" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "インデクスが多すぎます" @@ -3670,6 +3674,10 @@ msgstr "インデクスが多すぎます" msgid "too many values to unpack (expected %d)" msgstr "アンパックする値が多すぎます (%d個を期待)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapzは同じ長さの1次元arrayに対して定義されています" @@ -3678,10 +3686,6 @@ msgstr "trapzは同じ長さの1次元arrayに対して定義されています" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "タプル/リストの長さが正しくありません" diff --git a/locale/ko.po b/locale/ko.po index c2272af7b..97ede047a 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-10-05 12:12+0000\n" "Last-Translator: Michal Čihař \n" "Language-Team: LANGUAGE \n" @@ -1865,10 +1865,6 @@ msgstr "" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "" @@ -2505,6 +2501,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" @@ -2815,7 +2815,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3058,6 +3058,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3287,10 +3291,6 @@ msgstr "" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3634,6 +3634,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" @@ -3643,6 +3647,10 @@ msgstr "" msgid "too many values to unpack (expected %d)" msgstr "" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3651,10 +3659,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index 73aeade01..3fce13212 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-12-23 20:14+0000\n" "Last-Translator: _fonzlate \n" "Language-Team: none\n" @@ -1904,10 +1904,6 @@ msgstr "Teveel beeldschermen" msgid "Total data to write is larger than outgoing_packet_length" msgstr "Totale data om te schrijven is groter dan outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (meest recente call laatst):\n" @@ -2556,6 +2552,10 @@ msgstr "data moet itereerbaar zijn" msgid "data must be of equal length" msgstr "data moet van gelijke lengte zijn" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "decimale getallen zijn niet ondersteund" @@ -2869,8 +2869,8 @@ msgid "input and output shapes are not compatible" msgstr "in- en uitvoervormen zijn niet compatibel" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "invoerargument moet een integer of 2-tuple zijn" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3115,6 +3115,10 @@ msgstr "maxiter moet groter dan 0 zijn" msgid "maxiter should be > 0" msgstr "maxiter moet groter dan 0 zijn" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3344,10 +3348,6 @@ msgstr "operands konden niet samen verzonden worden" msgid "operation is implemented for 1D Boolean arrays only" msgstr "operatie is alleen geïmplementeerd voor 1D Booleaanse arrays" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "operatie is niet geïmplementeerd voor vlakke array" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "bewerking is voor ndarrays niet geïmplementeerd" @@ -3694,6 +3694,10 @@ msgstr "tobytes kunnen alleen ingeroepen worden voor gesloten arrays" msgid "too many arguments provided with the given format" msgstr "te veel argumenten opgegeven bij dit formaat" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "te veel indices" @@ -3703,6 +3707,10 @@ msgstr "te veel indices" msgid "too many values to unpack (expected %d)" msgstr "te veel waarden om uit te pakken (%d verwacht)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapz is gedefinieerd voor eendimensionale arrays van gelijke lengte" @@ -3711,10 +3719,6 @@ msgstr "trapz is gedefinieerd voor eendimensionale arrays van gelijke lengte" msgid "trigger level must be 0 or 1" msgstr "triggerniveau moet 0 of 1 zijn" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "tuple index buiten bereik" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tuple of lijst heeft onjuiste lengte" @@ -3929,6 +3933,15 @@ msgstr "zi moet van type float zijn" msgid "zi must be of shape (n_section, 2)" msgstr "zi moet vorm (n_section, 2) hebben" +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "invoerargument moet een integer of 2-tuple zijn" + +#~ msgid "operation is not implemented for flattened array" +#~ msgstr "operatie is niet geïmplementeerd voor vlakke array" + +#~ msgid "tuple index out of range" +#~ msgstr "tuple index buiten bereik" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/pl.po b/locale/pl.po index deefb878b..80d5cf90b 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-12-02 20:29+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" @@ -1876,10 +1876,6 @@ msgstr "Zbyt wiele wyświetlaczy" msgid "Total data to write is larger than outgoing_packet_length" msgstr "" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Ślad wyjątku (najnowsze wywołanie na końcu):\n" @@ -2521,6 +2517,10 @@ msgstr "" msgid "data must be of equal length" msgstr "" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "liczby dziesiętne nieobsługiwane" @@ -2832,7 +2832,7 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" +msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/fft/fft.c @@ -3075,6 +3075,10 @@ msgstr "" msgid "maxiter should be > 0" msgstr "" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3304,10 +3308,6 @@ msgstr "operandy nie mogły być rozgłaszane razem" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" @@ -3653,6 +3653,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "zbyt wiele argumentów podanych dla tego formatu" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "zbyt wiele indeksów" @@ -3662,6 +3666,10 @@ msgstr "zbyt wiele indeksów" msgid "too many values to unpack (expected %d)" msgstr "zbyt wiele wartości do rozpakowania (oczekiwano %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" @@ -3670,10 +3678,6 @@ msgstr "" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "indeks krotki poza zakresem" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "krotka/lista ma złą długość" @@ -3888,6 +3892,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "tuple index out of range" +#~ msgstr "indeks krotki poza zakresem" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 73922b3d3..43c5626b2 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2021-01-01 04:29+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" @@ -1927,10 +1927,6 @@ msgid "Total data to write is larger than outgoing_packet_length" msgstr "" "O total dos dados que serão gravados é maior que outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "O TouchAlarm não está disponívle no modo light sleep" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (a última chamada mais recente):\n" @@ -2584,6 +2580,10 @@ msgstr "os dados devem ser iteráveis" msgid "data must be of equal length" msgstr "os dados devem ser de igual comprimento" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "os números decimais não são compatíveis" @@ -2897,8 +2897,8 @@ msgid "input and output shapes are not compatible" msgstr "as formas de entrada e saída não são compatíveis" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "o argumento da entrada deve ser um número inteiro ou uma tupla de 2" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3143,6 +3143,10 @@ msgstr "maxiter deve ser > 0" msgid "maxiter should be > 0" msgstr "maxiter pode ser > 0" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3375,10 +3379,6 @@ msgstr "os operandos não puderam ser transmitidos juntos" msgid "operation is implemented for 1D Boolean arrays only" msgstr "A operação é implementada apenas para matrizes booleanas 1D" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "a operação não é implementada para a matriz achatada" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "a operação não foi implementada nos ndarrays" @@ -3728,6 +3728,10 @@ msgstr "os tobytes podem ser invocados apenas nas matrizes densas" msgid "too many arguments provided with the given format" msgstr "Muitos argumentos fornecidos com o formato dado" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "índices demais" @@ -3737,6 +3741,10 @@ msgstr "índices demais" msgid "too many values to unpack (expected %d)" msgstr "valores demais para descompactar (esperado %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "o trapz está definido para 1D arrays de igual tamanho" @@ -3745,10 +3753,6 @@ msgstr "o trapz está definido para 1D arrays de igual tamanho" msgid "trigger level must be 0 or 1" msgstr "nível do gatilho deve ser 0 ou 1" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "o índice da tupla está fora do intervalo" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "a tupla/lista está com tamanho incorreto" @@ -3963,6 +3967,18 @@ msgstr "zi deve ser de um tipo float" msgid "zi must be of shape (n_section, 2)" msgstr "zi deve estar na forma (n_section, 2)" +#~ msgid "TouchAlarm not available in light sleep" +#~ msgstr "O TouchAlarm não está disponívle no modo light sleep" + +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "o argumento da entrada deve ser um número inteiro ou uma tupla de 2" + +#~ msgid "operation is not implemented for flattened array" +#~ msgstr "a operação não é implementada para a matriz achatada" + +#~ msgid "tuple index out of range" +#~ msgstr "o índice da tupla está fora do intervalo" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/sv.po b/locale/sv.po index 71b1c3a86..c3d8c8a70 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-12-28 17:59+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" @@ -1902,10 +1902,6 @@ msgstr "För många displayer" msgid "Total data to write is larger than outgoing_packet_length" msgstr "Total data som ska skrivas är större än outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (senaste anrop):\n" @@ -2551,6 +2547,10 @@ msgstr "data måste vara itererbar" msgid "data must be of equal length" msgstr "data måste vara av samma längd" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "decimaltal stöds inte" @@ -2864,8 +2864,8 @@ msgid "input and output shapes are not compatible" msgstr "indata- och utdataformer är inte kompatibla" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "indataargumentet måste vara ett heltal eller en 2-tupel" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3110,6 +3110,10 @@ msgstr "maxiter måste vara > 0" msgid "maxiter should be > 0" msgstr "maxiter bör vara > 0" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3339,10 +3343,6 @@ msgstr "operander kan inte sändas tillsammans" msgid "operation is implemented for 1D Boolean arrays only" msgstr "operationen är enbart implementerad för 1D Boolean-matriser" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "operationen inte implementeras för tillplattad matris" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "åtgärden är inte implementerad för ndarray:er" @@ -3689,6 +3689,10 @@ msgstr "tobyte kan enbart anropas för täta matriser" msgid "too many arguments provided with the given format" msgstr "för många argument för det givna formatet" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "för många index" @@ -3698,6 +3702,10 @@ msgstr "för många index" msgid "too many values to unpack (expected %d)" msgstr "för många värden att packa upp (förväntat %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapz är definierad för 1D-matriser med samma längd" @@ -3706,10 +3714,6 @@ msgstr "trapz är definierad för 1D-matriser med samma längd" msgid "trigger level must be 0 or 1" msgstr "triggernivå måste vara 0 eller 1" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "tupelindex utanför intervallet" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "tupel/lista har fel längd" @@ -3924,6 +3928,15 @@ msgstr "zi måste vara av typ float" msgid "zi must be of shape (n_section, 2)" msgstr "zi måste vara i formen (n_section, 2)" +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "indataargumentet måste vara ett heltal eller en 2-tupel" + +#~ msgid "operation is not implemented for flattened array" +#~ msgstr "operationen inte implementeras för tillplattad matris" + +#~ msgid "tuple index out of range" +#~ msgstr "tupelindex utanför intervallet" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index b372b067a..596855cf6 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-22 22:54+0530\n" +"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: 2020-11-19 01:28+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -1892,10 +1892,6 @@ msgstr "Xiǎnshì tài duō" msgid "Total data to write is larger than outgoing_packet_length" msgstr "Yào xiě rù de zǒng shùjù dàyú outgoing_packet_length" -#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c -msgid "TouchAlarm not available in light sleep" -msgstr "" - #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (Zuìjìn yīcì dǎ diànhuà):\n" @@ -2543,6 +2539,10 @@ msgstr "shùjù bìxū shì kě diédài de" msgid "data must be of equal length" msgstr "shùjù chángdù bìxū xiāngděng" +#: extmod/ulab/code/ndarray.c +msgid "data type not understood" +msgstr "" + #: py/parsenum.c msgid "decimal numbers not supported" msgstr "bù zhīchí xiǎoshù shù" @@ -2855,8 +2855,8 @@ msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/ulab_create.c -msgid "input argument must be an integer or a 2-tuple" -msgstr "shūrù cānshù bìxū shì zhěngshù huò 2 yuán zǔ" +msgid "input argument must be an integer, a tuple, or a list" +msgstr "" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3099,6 +3099,10 @@ msgstr "maxiter bì xū > 0" msgid "maxiter should be > 0" msgstr "maxiter yìng wéi > 0" +#: extmod/ulab/code/numerical/numerical.c +msgid "median argument must be an ndarray" +msgstr "" + #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" @@ -3328,10 +3332,6 @@ msgstr "cāozuò shǔ bùnéng yīqǐ guǎngbò" msgid "operation is implemented for 1D Boolean arrays only" msgstr "" -#: extmod/ulab/code/numerical/numerical.c -msgid "operation is not implemented for flattened array" -msgstr "" - #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "cāozuò wèi zài ndarrays shàng shíxiàn" @@ -3677,6 +3677,10 @@ msgstr "" msgid "too many arguments provided with the given format" msgstr "tígōng jǐ dìng géshì de cānshù tài duō" +#: extmod/ulab/code/ulab_create.c +msgid "too many dimensions" +msgstr "" + #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "suǒyǐn tài duō" @@ -3686,6 +3690,10 @@ msgstr "suǒyǐn tài duō" msgid "too many values to unpack (expected %d)" msgstr "dǎkāi tài duō zhí (yùqí %d)" +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays" +msgstr "" + #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "Trapz shì wèi děng zhǎng de 1D shùzǔ dìngyì de" @@ -3694,10 +3702,6 @@ msgstr "Trapz shì wèi děng zhǎng de 1D shùzǔ dìngyì de" msgid "trigger level must be 0 or 1" msgstr "" -#: extmod/ulab/code/linalg/linalg.c -msgid "tuple index out of range" -msgstr "yuán zǔ suǒyǐn chāochū fànwéi" - #: py/obj.c msgid "tuple/list has wrong length" msgstr "yuán zǔ/lièbiǎo chángdù cuòwù" @@ -3912,6 +3916,12 @@ msgstr "zi bìxū wèi fú diǎn xíng" msgid "zi must be of shape (n_section, 2)" msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)" +#~ msgid "input argument must be an integer or a 2-tuple" +#~ msgstr "shūrù cānshù bìxū shì zhěngshù huò 2 yuán zǔ" + +#~ msgid "tuple index out of range" +#~ msgstr "yuán zǔ suǒyǐn chāochū fànwéi" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" -- cgit v1.2.3 From 90a299bb1e6c80971b576dc51dd50bca6220b6f7 Mon Sep 17 00:00:00 2001 From: Bernhard Boser Date: Tue, 5 Jan 2021 11:17:09 -0800 Subject: added //| to (hopefully) get CI to pass --- locale/circuitpython.pot | 6 +++++- shared-bindings/msgpack/ExtType.c | 2 ++ shared-bindings/msgpack/__init__.c | 2 ++ 3 files changed, 9 insertions(+), 1 deletion(-) (limited to 'locale') diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index cea26c6ba..578257e2d 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-12-08 09:56-0800\n" +"POT-Creation-Date: 2021-01-05 11:08-0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -3438,6 +3438,10 @@ msgstr "" msgid "shape must be a tuple" msgstr "" +#: shared-module/msgpack/__init__.c +msgid "short read" +msgstr "" + #: py/objstr.c msgid "sign not allowed in string format specifier" msgstr "" diff --git a/shared-bindings/msgpack/ExtType.c b/shared-bindings/msgpack/ExtType.c index 5dc3d4992..e9ddd32bc 100644 --- a/shared-bindings/msgpack/ExtType.c +++ b/shared-bindings/msgpack/ExtType.c @@ -61,6 +61,7 @@ STATIC mp_obj_t mod_msgpack_exttype_make_new(const mp_obj_type_t *type, size_t n //| code: int //| """The type code, in range 0~127.""" +//| ... //| STATIC mp_obj_t mod_msgpack_exttype_get_code(mp_obj_t self_in) { mod_msgpack_extype_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -88,6 +89,7 @@ const mp_obj_property_t mod_msgpack_exttype_code_obj = { //| data: bytes //| """Data.""" +//| ... //| STATIC mp_obj_t mod_msgpack_exttype_get_data(mp_obj_t self_in) { mod_msgpack_extype_obj_t *self = MP_OBJ_TO_PTR(self_in); diff --git a/shared-bindings/msgpack/__init__.c b/shared-bindings/msgpack/__init__.c index 5dc45dde2..e1b6b8fce 100644 --- a/shared-bindings/msgpack/__init__.c +++ b/shared-bindings/msgpack/__init__.c @@ -89,6 +89,7 @@ //| function called for python objects that do not have //| a representation in msgpack format. //| """ +//| ... //| STATIC mp_obj_t mod_msgpack_pack(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_obj, ARG_buffer, ARG_default }; @@ -119,6 +120,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(mod_msgpack_pack_obj, 1, mod_msgpack_pack); //| :param Optional[bool] use_list: return array as list or tuple (use_list=False). //| :return object: object read from buffer. //| """ +//| ... //| STATIC mp_obj_t mod_msgpack_unpack(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_ext_hook, ARG_use_list }; -- cgit v1.2.3 From 0057e1dc2cf9e848e7aa616f2b4c82e9f61b936a Mon Sep 17 00:00:00 2001 From: Wellington Terumi Uemura Date: Tue, 5 Jan 2021 02:27:28 +0000 Subject: Translated using Weblate (Portuguese (Brazil)) Currently translated at 100.0% (892 of 892 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/pt_BR/ --- locale/pt_BR.po | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'locale') diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 43c5626b2..3c6c59562 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-01 04:29+0000\n" +"PO-Revision-Date: 2021-01-05 21:03+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -2582,7 +2582,7 @@ msgstr "os dados devem ser de igual comprimento" #: extmod/ulab/code/ndarray.c msgid "data type not understood" -msgstr "" +msgstr "o tipo do dado não foi compreendido" #: py/parsenum.c msgid "decimal numbers not supported" @@ -2898,7 +2898,7 @@ msgstr "as formas de entrada e saída não são compatíveis" #: extmod/ulab/code/ulab_create.c msgid "input argument must be an integer, a tuple, or a list" -msgstr "" +msgstr "argumento da entrada deve ser um número inteiro, uma tupla ou uma lista" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3145,7 +3145,7 @@ msgstr "maxiter pode ser > 0" #: extmod/ulab/code/numerical/numerical.c msgid "median argument must be an ndarray" -msgstr "" +msgstr "o argumento mediano deve ser um ndarray" #: py/runtime.c #, c-format @@ -3730,7 +3730,7 @@ msgstr "Muitos argumentos fornecidos com o formato dado" #: extmod/ulab/code/ulab_create.c msgid "too many dimensions" -msgstr "" +msgstr "dimensões demais" #: extmod/ulab/code/ndarray.c msgid "too many indices" @@ -3743,7 +3743,7 @@ msgstr "valores demais para descompactar (esperado %d)" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays" -msgstr "" +msgstr "Trapz está definido para arrays 1D" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" -- cgit v1.2.3 From 794327254e4c80a5d3c462b16a82d8ede1c1da6a Mon Sep 17 00:00:00 2001 From: Jonny Bergdahl Date: Mon, 4 Jan 2021 21:13:33 +0000 Subject: Translated using Weblate (Swedish) Currently translated at 100.0% (892 of 892 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/sv/ --- locale/sv.po | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) (limited to 'locale') diff --git a/locale/sv.po b/locale/sv.po index c3d8c8a70..6a19dc5ad 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2020-12-28 17:59+0000\n" +"PO-Revision-Date: 2021-01-05 21:03+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" "Language: sv\n" @@ -21,12 +21,16 @@ msgid "" "\n" "Code done running.\n" msgstr "" +"\n" +"Koden har kört klart.\n" #: main.c msgid "" "\n" "Code stopped by auto-reload.\n" msgstr "" +"\n" +"Koden stoppades av auto-omladdning.\n" #: supervisor/shared/safe_mode.c msgid "" @@ -546,15 +550,16 @@ msgstr "Anropa super().__init__() innan du använder det ursprungliga objektet." #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on RTC IO from deep sleep." -msgstr "" +msgstr "Kan bara larma på RTC-IO från djupsömn." #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on one low pin while others alarm high from deep sleep." msgstr "" +"Kan bara larma från djup sömn på låg för en pinne medan andra larmar på hög." #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on two low pins from deep sleep." -msgstr "" +msgstr "Kan bara larma från djup sömn på två låga pinnar." #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "Can't set CCCD on local Characteristic" @@ -591,7 +596,7 @@ msgstr "Det går inte att mata ut båda kanalerna på samma pinne" #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Cannot pull on input-only pin." -msgstr "" +msgstr "Kan bara använda pull på pinne för input." #: shared-module/bitbangio/SPI.c msgid "Cannot read without MISO pin." @@ -639,7 +644,7 @@ msgstr "Det går inte att ändra frekvensen på en timer som redan används" #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Cannot wake on pin edge. Only level." -msgstr "" +msgstr "Kan inte vakna på nivåskift, enbart nivå." #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." @@ -1509,7 +1514,7 @@ msgstr "Endast ett alarm.time kan ställas in." #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c msgid "Only one alarm.touch alarm can be set." -msgstr "" +msgstr "Endast ett larm av typ alarm.touch kan ställas in." #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" @@ -1621,7 +1626,7 @@ msgstr "" #: main.c msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" -msgstr "" +msgstr "Fingerar djup sömn tills larm, Ctrl-C eller filskrivning.\n" #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." @@ -2549,7 +2554,7 @@ msgstr "data måste vara av samma längd" #: extmod/ulab/code/ndarray.c msgid "data type not understood" -msgstr "" +msgstr "datatyp inte förstådd" #: py/parsenum.c msgid "decimal numbers not supported" @@ -2865,7 +2870,7 @@ msgstr "indata- och utdataformer är inte kompatibla" #: extmod/ulab/code/ulab_create.c msgid "input argument must be an integer, a tuple, or a list" -msgstr "" +msgstr "indataargument måste vara integer, en tuple eller list" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3112,7 +3117,7 @@ msgstr "maxiter bör vara > 0" #: extmod/ulab/code/numerical/numerical.c msgid "median argument must be an ndarray" -msgstr "" +msgstr "argumentet median måste vara en ndarray" #: py/runtime.c #, c-format @@ -3691,7 +3696,7 @@ msgstr "för många argument för det givna formatet" #: extmod/ulab/code/ulab_create.c msgid "too many dimensions" -msgstr "" +msgstr "för många dimensioner" #: extmod/ulab/code/ndarray.c msgid "too many indices" @@ -3704,7 +3709,7 @@ msgstr "för många värden att packa upp (förväntat %d)" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays" -msgstr "" +msgstr "trapz är definierat för 1D-matriser" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" -- cgit v1.2.3 From 9eb2ca02a57cea7ed44f3e144e446cab15a90354 Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Tue, 5 Jan 2021 22:03:19 +0100 Subject: Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/pt_BR.po | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'locale') diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 3c6c59562..f399ade16 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -2898,7 +2898,8 @@ msgstr "as formas de entrada e saída não são compatíveis" #: extmod/ulab/code/ulab_create.c msgid "input argument must be an integer, a tuple, or a list" -msgstr "argumento da entrada deve ser um número inteiro, uma tupla ou uma lista" +msgstr "" +"argumento da entrada deve ser um número inteiro, uma tupla ou uma lista" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" -- cgit v1.2.3 From 30ed8d136cea63eda2b518c3bbdfde2d79d9bf2c Mon Sep 17 00:00:00 2001 From: Hugo Dahl Date: Wed, 6 Jan 2021 00:59:12 +0000 Subject: Translated using Weblate (French) Currently translated at 100.0% (892 of 892 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/fr/ --- locale/fr.po | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'locale') diff --git a/locale/fr.po b/locale/fr.po index 187ee6f92..e898631ea 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-01 04:29+0000\n" +"PO-Revision-Date: 2021-01-07 01:29+0000\n" "Last-Translator: Hugo Dahl \n" "Language: fr\n" "MIME-Version: 1.0\n" @@ -2595,7 +2595,7 @@ msgstr "les données doivent être de longueur égale" #: extmod/ulab/code/ndarray.c msgid "data type not understood" -msgstr "" +msgstr "le type de donnée n'est pas reconnu" #: py/parsenum.c msgid "decimal numbers not supported" @@ -2913,7 +2913,7 @@ msgstr "les formes d'entrée et de sortie ne sont pas compatibles" #: extmod/ulab/code/ulab_create.c msgid "input argument must be an integer, a tuple, or a list" -msgstr "" +msgstr "Paramètre entrant doit être un chiffre entier, un tuple, ou une liste" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -3161,7 +3161,7 @@ msgstr "maxiter devrait être > 0" #: extmod/ulab/code/numerical/numerical.c msgid "median argument must be an ndarray" -msgstr "" +msgstr "Paramètre pour median doit être un ndarray" #: py/runtime.c #, c-format @@ -3745,7 +3745,7 @@ msgstr "trop d'arguments fournis avec ce format" #: extmod/ulab/code/ulab_create.c msgid "too many dimensions" -msgstr "" +msgstr "Trop de dimensions" #: extmod/ulab/code/ndarray.c msgid "too many indices" @@ -3758,7 +3758,7 @@ msgstr "trop de valeur à dégrouper (%d attendues)" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays" -msgstr "" +msgstr "trapz est défini pour tableaux à une dimension" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" -- cgit v1.2.3 From a03f35e093e8c54da0a5781988596694c2f81e6c Mon Sep 17 00:00:00 2001 From: Dennis Schweer Date: Thu, 7 Jan 2021 15:49:14 +0000 Subject: Translated using Weblate (German) Currently translated at 84.4% (753 of 892 strings) Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/de/ --- locale/de_DE.po | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) (limited to 'locale') diff --git a/locale/de_DE.po b/locale/de_DE.po index 0dd711999..a1d072643 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -6,20 +6,22 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2020-11-26 03:11+0000\n" -"Last-Translator: Daniel Bravo Darriba \n" +"PO-Revision-Date: 2021-01-07 18:01+0000\n" +"Last-Translator: Dennis Schweer \n" "Language: de_DE\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.4-dev\n" +"X-Generator: Weblate 4.4.1-dev\n" #: main.c msgid "" "\n" "Code done running.\n" msgstr "" +"\n" +"Programm wird ausgeführt.\n" #: main.c msgid "" @@ -129,7 +131,7 @@ msgstr "'%q' Objekt unterstützt '%q' nicht" #: py/obj.c msgid "'%q' object does not support item assignment" -msgstr "" +msgstr "'%q' Objekt unterschützt keine Elementzuweisung" #: py/obj.c msgid "'%q' object does not support item deletion" @@ -141,7 +143,7 @@ msgstr "'%q' Objekt hat kein Attribut '%q'" #: py/runtime.c msgid "'%q' object is not an iterator" -msgstr "" +msgstr "'%q' Objekt ist kein Iterator" #: py/objtype.c py/runtime.c msgid "'%q' object is not callable" @@ -235,7 +237,7 @@ msgstr "'continue' außerhalb einer Schleife" #: py/objgenerator.c msgid "'coroutine' object is not an iterator" -msgstr "" +msgstr "'coroutine' Objekt ist kein Iterator" #: py/compile.c msgid "'data' requires at least 2 arguments" @@ -307,7 +309,7 @@ msgstr "Alle I2C-Peripheriegeräte sind in Benutzung" #: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" -msgstr "" +msgstr "Alle PCNT Einheiten sind in Benutzung" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c @@ -710,7 +712,7 @@ msgstr "Konnte Kamera nicht initialisieren" #: ports/cxd56/common-hal/gnss/GNSS.c msgid "Could not initialize GNSS" -msgstr "" +msgstr "GNSS konnte nicht initialisiert werden" #: ports/cxd56/common-hal/sdioio/SDCard.c msgid "Could not initialize SDCard" @@ -837,7 +839,7 @@ msgstr "Die EZB arbeitet jeweils nur mit 16 Bytes" #: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" -msgstr "" +msgstr "ESP-IDF Speicherallozierung fehlgeschlagen" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c @@ -903,7 +905,7 @@ msgstr "FFT ist nur für ndarrays definiert" #: extmod/ulab/code/fft/fft.c msgid "FFT is implemented for linear arrays only" -msgstr "" +msgstr "FFT ist nur für lineare Arrays implementiert" #: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Failed SSL handshake" @@ -934,7 +936,7 @@ msgstr "Konnte keine RX Buffer mit %d allozieren" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Failed to allocate Wifi memory" -msgstr "" +msgstr "Zuweisung des Wifi Speichers ist fehlgeschlagen" #: ports/esp32s2/common-hal/wifi/ScannedNetworks.c msgid "Failed to allocate wifi scan memory" @@ -950,7 +952,7 @@ msgstr "Verbindung nicht erfolgreich: timeout" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Failed to init wifi" -msgstr "" +msgstr "Wifi Initialisierung ist fehlgeschlagen" #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" @@ -1037,7 +1039,7 @@ msgstr "I2SOut nicht verfügbar" #: ports/esp32s2/common-hal/alarm/pin/__init__.c msgid "IOs 0, 2 & 4 do not support internal pullup in sleep" -msgstr "" +msgstr "IOs 0, 2 & 4 unterstützen keinen internen Pull up im sleep-Modus" #: shared-bindings/aesio/aes.c #, c-format @@ -1058,7 +1060,7 @@ msgstr "Inkorrekte Puffergröße" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" -msgstr "" +msgstr "Initialisierung aufgrund von Speichermangel fehlgeschlagen" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" @@ -3858,7 +3860,7 @@ msgstr "nicht unterstütztes Formatzeichen '%c' (0x%x) bei Index %d" #: py/runtime.c msgid "unsupported type for %q: '%q'" -msgstr "" +msgstr "nicht unterstützer Typ für %q: '%q'" #: py/runtime.c msgid "unsupported type for operator" @@ -3866,7 +3868,7 @@ msgstr "nicht unterstützter Typ für Operator" #: py/runtime.c msgid "unsupported types for %q: '%q', '%q'" -msgstr "" +msgstr "nicht unterstützte Typen für %q: '%q', '%q'" #: py/objint.c #, c-format @@ -3911,7 +3913,7 @@ msgstr "" #: extmod/ulab/code/vector/vectorise.c msgid "wrong input type" -msgstr "" +msgstr "falscher Eingabetyp" #: extmod/ulab/code/ulab_create.c py/objstr.c msgid "wrong number of arguments" @@ -3927,7 +3929,7 @@ msgstr "falscher Operandentyp" #: extmod/ulab/code/vector/vectorise.c msgid "wrong output type" -msgstr "" +msgstr "Falscher Ausgabetyp" #: shared-module/displayio/Shape.c msgid "x value out of bounds" -- cgit v1.2.3 From e79ee785ac45abc1ee53d9cdbfd30f2290ee7bd9 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Thu, 7 Jan 2021 14:40:51 -0600 Subject: circuitpython.pot: regenerate without timestamp --- locale/circuitpython.pot | 1 - 1 file changed, 1 deletion(-) (limited to 'locale') diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index f319b82f8..63dc92d18 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,6 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2021-01-04 12:55-0600\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" -- cgit v1.2.3