From 7e5abe7ff1cc55f6f8a250f24cd5fcedeb3d2389 Mon Sep 17 00:00:00 2001 From: Dean Date: Sun, 20 Feb 2011 13:08:29 +0000 Subject: Start update of documentation to support possible multiple architectures in the future - alter \file documentation to automatically copy in the module documentation where possible. git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1673 d5102386-fcda-11dd-9fdb-3debd5008f28 --- LUFA/ManPages/SoftwareBootloaderJump.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'LUFA/ManPages/SoftwareBootloaderJump.txt') diff --git a/LUFA/ManPages/SoftwareBootloaderJump.txt b/LUFA/ManPages/SoftwareBootloaderJump.txt index d0b41e1b..049f49c8 100644 --- a/LUFA/ManPages/SoftwareBootloaderJump.txt +++ b/LUFA/ManPages/SoftwareBootloaderJump.txt @@ -12,12 +12,15 @@ * hardware). This might be required because the device does not have any physical user input, or simply * just to streamline the device upgrade process on the host PC. * - * The following C code snippet may be used to enter the bootloader upon request by the user application. + * The following C code snippets may be used to enter the bootloader upon request by the user application. * By using the watchdog to physically reset the controller, it is ensured that all system hardware is * completely reset to their defaults before the bootloader is run. This is important; since bootloaders * are written to occupy a very limited space, they usually make assumptions about the register states based * on the default values after a hard-reset of the chip. * + * \section Sec_SoftareBootAVR8 AVR8 Architecture + * The following software bootloader jump code is written for the AVR8 architecture. + * * \code * #include * #include -- cgit v1.2.3