1 files changed, 36 insertions, 0 deletions
diff --git a/Orone-mini-v0/Orone-mini-S8H-v0r001/README-PCB.txt b/Orone-mini-v0/Orone-mini-S8H-v0r001/README-PCB.txt
new file mode 100644
index 0000000..34aa14d
--- /dev/null
+++ b/Orone-mini-v0/Orone-mini-S8H-v0r001/README-PCB.txt
@@ -0,0 +1,36 @@
+Orone-mini-S8H-v0r001
+Copyright 2013 G Bulmer
+
+This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.
+I ask that my name remain visible in the copper.
+
+The pin headers are standard 'breadboard friendly' 0.1" pitch.
+The two rows of pin headers are 0.8" apart, and hence fit a single breadboard.
+The board is 2.4" long x 1" high. Most components are 1206 or larger.
+
+1206 components are too big to fit in mini 2.1" length. 
+Further 8mil track/8mil clearance required more board area
+Hence the board is lengthened from 2.1" to 2.4"
+Like other Orone-mini, 1206 C1 is replaced with 7343-case size
+
+Design Rules: OSHPark.com & Seeedstudio 'Fusion' PCB Service
+
+Routing
+Crystal tracks & Top Layer MCU tracks are 8mil/8mil to enable a wider range of PCB manufacturers to reliably make the board.
+All tracks from thru-hole (hand soldered) components, except pin headers, are 10mil or wider. This is intended to make the tracks more robust.
+
+All Bottom Layer tracks are 10mil or bigger, except Crystal tracks; this is intended to be easier to make reliably.
+
+Vias: The three via shapes are used to give information, and help 'read' the PCB.
+VIA KEY
+SQUARE:  Digital Ground (DGND) and thermal vias
+ROUND:   Signal
+OCTAGON: Power (e.g. Vcc) or segregated Ground (e.g. AGND) and one ground via
+
+Notes
+There are four Hidden Airwires, which do not need routing (replicated on switches)
+For safety, type 'RATSNEST *' to make them visible before making any changes
+Two pads 33 and DISC, printed at 45 degrees, are signals, not for components.
+DRC->Restring Pads & Vias minimum increased from OSHPark 7mil to 10mil to support more PCB manufacturers design rules by providing larger annular rings.
+
+Ventosus found the ADC was significantly 'noisier' than Maple-mini. So the ADC tracks are more thoroughly separated from other tracks.