Initial commit of working OSC parsing over Wifi

1 files changed, 74 insertions, 0 deletions

diff --git a/Libraries/WiShield/examples/WebClient/WebClient.pde b/Libraries/WiShield/examples/WebClient/WebClient.pde
new file mode 100644
index 0000000..53e243c
--- /dev/null
+++ b/Libraries/WiShield/examples/WebClient/WebClient.pde
@@ -0,0 +1,74 @@
+/*
+ * Web Client
+ *
+ * A simple web client example using the WiShield 1.0
+ */
+
+#include <WiShield.h>
+
+#define WIRELESS_MODE_INFRA	1
+#define WIRELESS_MODE_ADHOC	2
+
+// Wireless configuration parameters ----------------------------------------
+unsigned char local_ip[] = {192,168,1,2};	// IP address of WiShield
+unsigned char gateway_ip[] = {192,168,1,1};	// router or gateway IP address
+unsigned char subnet_mask[] = {255,255,255,0};	// subnet mask for the local network
+const prog_char ssid[] PROGMEM = {"ASYNCLABS"};		// max 32 bytes
+
+unsigned char security_type = 0;	// 0 - open; 1 - WEP; 2 - WPA; 3 - WPA2
+
+// WPA/WPA2 passphrase
+const prog_char security_passphrase[] PROGMEM = {"12345678"};	// max 64 characters
+
+// WEP 128-bit keys
+// sample HEX keys
+prog_uchar wep_keys[] PROGMEM = {	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d,	// Key 0
+									0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,	0x00,	// Key 1
+									0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,	0x00,	// Key 2
+									0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,	0x00	// Key 3
+								};
+
+// setup the wireless mode
+// infrastructure - connect to AP
+// adhoc - connect to another WiFi device
+unsigned char wireless_mode = WIRELESS_MODE_INFRA;
+
+unsigned char ssid_len;
+unsigned char security_passphrase_len;
+//---------------------------------------------------------------------------
+
+void setup()
+{
+	WiFi.init();
+}
+
+unsigned char loop_cnt = 0;
+
+// The stack does not have support for DNS and therefore cannot resolve
+// host names. It needs actual IP addresses of the servers. This info
+// can be obtained by executing, for example, $ ping twitter.com on
+// a terminal on your PC
+//char google_ip[] = {74,125,67,100};	// Google
+char twitter_ip[] = {128,121,146,100};	// Twitter
+
+// This string can be used to send a request to Twitter.com to update your status
+// It will need a valid Authorization string which can be derived from your
+// Twitter.com username and password using Base64 algorithm
+// See, http://en.wikipedia.org/wiki/Basic_access_authentication
+// You need to replace <-!!-Authorization String-!!-> with a valid string before
+// using this sample sketch.
+// The Content-Length variable should equal the length of the data string
+// In the example below, "Content-Length: 21" corresponds to "status=Ready to sleep"
+const prog_char twitter[] PROGMEM = {"POST /statuses/update.xml HTTP/1.1\r\nAuthorization: Basic <-!!-Authorization String-!!->\r\nUser-Agent: uIP/1.0\r\nHost: twitter.com\r\nContent-Length: 21\r\nContent-Type: application/x-www-form-urlencoded\r\n\r\nstatus=Ready to sleep"};
+
+void loop()
+{
+	// if this is the first iteration
+	// send the request
+	if (loop_cnt == 0) {
+		webclient_get(twitter_ip, 80, "/");
+		loop_cnt = 1;
+	}
+	
+	WiFi.run();
+}