1 files changed, 172 insertions, 0 deletions
diff --git a/examples/Scheduler_example05_StatusRequest/Scheduler_example05_StatusRequest.ino b/examples/Scheduler_example05_StatusRequest/Scheduler_example05_StatusRequest.ino
new file mode 100644
index 0000000..013c356
--- /dev/null
+++ b/examples/Scheduler_example05_StatusRequest/Scheduler_example05_StatusRequest.ino
@@ -0,0 +1,172 @@
+/** This test emulates querying 3 sensors once every 10 seconds, each could respond with a different delay
+ *    (ultrasonic sensors for instance) and printing a min value of the three when all three have reported their values.
+ *    The overall timeout of 1 second is setup as well.
+ *    An error message needs to be printed if a timeout occurred instead of a value.
+ */
+
+
+#define _TASK_SLEEP_ON_IDLE_RUN
+#define _TASK_STATUS_REQUEST
+#include <TaskScheduler.h>
+
+StatusRequest measure;
+
+Scheduler ts; 
+
+// Callback methods prototypes
+void CycleCallback();
+void MeasureCallback(); 
+bool MeasureEnable();
+void MeasureDisable();
+void CalcCallback();
+void S1Callback(); bool S1Enable();
+void S2Callback(); bool S2Enable();
+void S3Callback(); bool S3Enable();
+
+// Tasks
+Task tCycle(10000, TASK_FOREVER, &CycleCallback, &ts, true);
+Task tMeasure(1000, TASK_ONCE, &MeasureCallback, &ts, false, &MeasureEnable, &MeasureDisable);
+Task tCalculate(&CalcCallback, &ts);
+Task tSensor1(0, TASK_ONCE, &S1Callback, &ts, false, &S1Enable);
+Task tSensor2(0, TASK_ONCE, &S2Callback, &ts, false, &S2Enable);
+Task tSensor3(0, TASK_ONCE, &S3Callback, &ts, false, &S3Enable);
+
+
+long distance, d1, d2, d3;
+
+void CycleCallback() {
+  Serial.println("CycleCallback: Initiating measurement cycle every 10 seconds");
+
+  tMeasure.restartDelayed();
+}
+
+
+
+bool MeasureEnable() {
+  Serial.println("MeasureEnable: Activating sensors");  
+
+  distance = 0;
+  measure.setWaiting(3); // Set the StatusRequest to wait for 3 signals. 
+  tCalculate.waitFor(&measure);
+
+  tSensor1.restartDelayed();
+  tSensor2.restartDelayed();
+  tSensor3.restartDelayed();
+
+  return true;
+}
+
+void MeasureCallback() {
+  Serial.println("MeasureCallback: Invoked by calculate task or one second later");  
+
+  if (measure.pending()) {
+    tCalculate.disable();
+    measure.signalComplete(-1);  // signal error
+    Serial.println("MeasureCallback: Timeout!");
+  }
+  else {
+    Serial.print("MeasureCallback: Min distance=");Serial.println(distance);
+  }
+}
+
+void MeasureDisable() {
+  Serial.println("MeasureDisable: Cleaning up");  
+  
+  tSensor1.disable();
+  tSensor2.disable();
+  tSensor3.disable();
+}
+
+
+void CalcCallback() {
+  Serial.println("CalcCallback: calculating");  
+  distance = -1;
+  if ( measure.getStatus() >= 0) {  // only calculate if statusrequest ended successfully
+    distance = d1 < d2 ? d1 : d2;
+    distance = d3 < distance ? d3 : distance;
+    tMeasure.forceNextIteration();
+  }
+}
+
+
+/** Simulation code for sensor 1
+ *  ----------------------------
+ */
+bool S1Enable() {
+  Serial.print("S1Enable: Triggering sensor1. Delay=");  
+
+  tSensor1.setInterval( random(1200) );  // Simulating sensor delay, which could go over 1 second and cause timeout
+  d1 = 0;
+  
+  Serial.println( tSensor1.getInterval() );
+  return true;
+}
+
+void S1Callback() {
+  Serial.print("S1Callback: Emulating measurement. d1=");  
+  d1 = random(501); // pick a value from 0 to 500 "centimeters" simulating a measurement 
+  measure.signal();
+  
+  Serial.println(d1); 
+}
+
+
+/** Simulation code for sensor 2
+ *  ----------------------------
+ */
+bool S2Enable() {
+  Serial.print("S2Enable: Triggering sensor2. Delay=");  
+
+  tSensor2.setInterval( random(1200) );  // Simulating sensor delay, which could go over 1 second and cause timeout
+  d2 = 0;
+
+  Serial.println( tSensor2.getInterval() );
+  return true;
+}
+
+void S2Callback() {
+  Serial.print("S2Callback: Emulating measurement. d2=");  
+  d2 = random(501); // pick a value from 0 to 500 "centimeters" simulating a measurement
+  measure.signal();
+
+  Serial.println(d2);  
+}
+
+
+/** Simulation code for sensor 3
+ *  ----------------------------
+ */
+bool S3Enable() {
+  Serial.print("S3Enable: Triggering sensor3. Delay=");  
+
+  tSensor3.setInterval( random(1200) );  // Simulating sensor delay, which could go over 1 second and cause timeout
+  d3 = 0;
+
+  Serial.println( tSensor3.getInterval() );
+  return true;
+}
+
+void S3Callback() {
+  Serial.print("S3Callback: Emulating measurement. d3=");  
+  d3 = random(501); // pick a value from 0 to 500 "centimeters" simulating a measurement
+  measure.signal();
+  
+  Serial.println(d3); 
+}
+
+
+/** Main Arduino code
+ *  Not much is left here - everything is taken care of by the framework
+ */
+void setup() {
+
+  Serial.begin(115200);
+  Serial.println("TaskScheduler StatusRequest Sensor Emulation Test. Complex Test.");  
+  randomSeed(analogRead(A1)+millis());
+}
+
+void loop() {
+  
+  ts.execute();
+
+}
+\ No newline at end of file