Added new progect that really doesnt work at the moment.

1 files changed, 232 insertions, 0 deletions

diff --git a/StephenWritesLightSwitch.cpp b/StephenWritesLightSwitch.cpp
new file mode 100644
index 0000000..710be98
--- /dev/null
+++ b/StephenWritesLightSwitch.cpp
@@ -0,0 +1,232 @@
+/*-----------------------------------------------------------------datalogger.cpp
+ *
+ * This is a functional prototype of a datalogger. 
+ * the logger takes info from a monitored device (device) over serial and commands 
+ * from a program or a user through a usb console. These commands are formatted
+ * in a mannor described in Monitor.cpp and Monitor.h
+ *
+ *   Copyright (c) 2012, Donald Delmar Davis, Suspect Devices
+ *   All rights reserved.
+ *    
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions are met:
+ *   * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ *   * Neither the name of the Suspect Devices nor the
+ *   names of its contributors may be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *    
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ *   ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ *   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *   DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+ *   DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ *   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *-----------------------------------------------------------------------------*/
+
+#ifndef uint8_t 
+#define uint8_t uint8
+#define uint16_t uint16 
+//#define uint32_t uint32 
+#endif
+
+#define ASCII_DELETE '\177'
+#define ASCII_BACKSPACE '\010'
+
+/*---------------------------------------------------------------------TUNABLES
+ * 
+ *----------------------------------------------------------------------------*/
+// should move this to common.h or something silly
+
+#define BLU_LED 19
+#define YEL_LED 18
+#define GRN_LED 14
+#define LED_ON  LOW
+#define LED_OFF HIGH
+/**
+ * \file setup.cpp 
+ */
+#include <stdio.h>
+#include <io.h>
+#include <signal.h>
+#include <stdint.h>
+#include <SdFat.h>
+#include <HardwareSPI.h>
+#include <wirish/wirish.h>
+#include <libmaple/timer.h>
+#include <libmaple/usart.h>
+//extern "C" {
+#include "Monitor.h"
+#include "Utilities.h"
+//}
+
+/* Global Variables */
+/*-------------------------------------------------------------GLOBAL VARIABLES
+ * 
+ *----------------------------------------------------------------------------*/
+
+HardwareSPI spi(1);
+//Sd2Card card(&spi);
+//Sd2Card card;HardwareSPI spi(1);
+Sd2Card card(spi, USE_NSS_PIN);
+
+SdVolume volume;
+SdFile root;
+SdFile file;
+
+
+SdFile settingsFile;
+SdFile sysinfoFile;
+char logFileName[16];
+char settingsFileName[16]="BOM5K.SET";
+char sysinfoFileName[16]="AMAV2.DAT";
+bool connectedToNet=false;
+bool logOpened=false;
+time_t epoch=0;
+
+#define MAX_SSN_LENGTH 16
+#define MAX_HWV_LENGTH 8
+#define MAX_SWV_LENGTH 24
+#define MAX_TIME_LENGTH 24
+
+
+char deviceSSN[MAX_SSN_LENGTH]="00000000100";
+char deviceHWV[MAX_HWV_LENGTH]="0";
+char deviceSWV[MAX_SWV_LENGTH]="0.0-000000";
+time_t deviceLastContact=0L;
+bool deviceIsConnected=false;
+int sdCardStatus=0;
+const int sensor_pin = 12;
+
+
+/*---------------------------------------------------------------hardwareSetup()
+ * 
+ *----------------------------------------------------------------------------*/
+
+void hardwareSetup(void) {
+    spi.begin(SPI_281_250KHZ, MSBFIRST, 0); // move to sdcard init?
+    
+    pinMode(YEL_LED, OUTPUT);
+    pinMode(GRN_LED, OUTPUT);
+    pinMode(BLU_LED, OUTPUT);
+    digitalWrite(YEL_LED, HIGH);
+    digitalWrite(BLU_LED, LOW);
+    digitalWrite(GRN_LED, HIGH);
+    SerialUSB.begin();  
+    Serial1.begin(9600);  
+    Serial2.begin(9600); 
+    // probably should initialize the monitor.
+    sdCardStatus=sdCardInit();
+    
+}
+/*-----------------------------------------------------------------------Setup()
+ * 
+ *----------------------------------------------------------------------------*/
+
+void setup( void )
+{
+    hardwareSetup();
+    // Setup the LED to steady on
+    pinMode(BOARD_LED_PIN, OUTPUT);
+    digitalWrite(BOARD_LED_PIN, HIGH);
+    
+    // Setup the button as input
+    pinMode(BOARD_BUTTON_PIN, INPUT);
+    digitalWrite(BOARD_BUTTON_PIN, HIGH);
+    
+    // Setup the sensor pin as an analog input
+    pinMode(sensor_pin,INPUT_ANALOG);
+    
+    registerAction(_DIR_, DIRaction);
+
+    timer.pause();
+    
+    // Set up period
+    timer.setPeriod(1000000); // in microseconds
+    
+    // Set up an interrupt on channel 1
+    timer.setMode(TIMER_CH1,TIMER_OUTPUT_COMPARE);
+    timer.setCompare(TIMER_CH1, 1);  // Interrupt 1 count after each update
+    timer.attachInterrupt(TIMER_CH1,ledTask);
+    
+    
+    // Refresh the timer's count, prescale, and overflow
+    timer.refresh();
+    
+    // Start the timer counting
+    timer.resume();
+    
+}
+
+/*---------------------------------------------------------------------LedTask()
+ * stubb
+ *----------------------------------------------------------------------------*/
+
+static void ledTask()
+{
+    togglePin(BLU_LED);
+}
+
+static void serialTasks() {
+    char ch;
+    setupKeywords();
+    while ((consoleComm.gotline==false) && (SerialUSB.available())) {
+        if ((((ch=SerialUSB.read())!='\r') && (ch!='\n'))
+            &&(consoleComm.len<MAX_COMMAND_LINE_LENGTH)
+            ) {
+            consoleComm.line[consoleComm.len++] = ch;
+        } else {
+            if (consoleComm.len) {
+                consoleComm.gotline = true;
+            }
+            consoleComm.line[consoleComm.len]='\0';
+        }
+        //SerialUSB.write(ch);
+    }
+    while ((deviceComm.gotline==false) && (Serial1.available())) {
+        if ((((ch=Serial1.read())!='\r') && (ch!='\n'))
+            &&(deviceComm.len<MAX_COMMAND_LINE_LENGTH)
+            ) {
+            deviceComm.line[deviceComm.len++] = ch;
+        } else {
+            if (deviceComm.len) {
+                deviceComm.gotline = true;
+            }
+            deviceComm.line[deviceComm.len]='\0';
+        }
+        //SerialUSB.write(ch);
+    }
+}
+
+// Force init to be called *first*, i.e. before static object allocation.
+// Otherwise, statically allocated objects that need libmaple may fail.
+__attribute__((constructor)) void premain() {
+    init();
+}
+
+int main(void) {
+    setup();
+    // should never get past setup.
+    while (true) {
+        serialTasks(); //move to 
+        if (consoleComm.gotline) {
+            handleConsoleInput(&consoleComm);
+        }
+        if (deviceComm.gotline) {
+            handleDeviceInput(&deviceComm);
+        }
+    
+            
+   }
+    
+    return 0;
+    
+}
\ No newline at end of file