diff options
| author | BiffoBear <martin@martinstehens.net> | 2021-02-03 05:49:40 +0700 |
|---|---|---|
| committer | BiffoBear <martin@martinstehens.net> | 2021-02-03 05:49:40 +0700 |
| commit | 2656c84b01197835f277bf624f992e7931f133df (patch) | |
| tree | a0bbe728f20472e5d8913763bfeede28b1017ad4 | |
| parent | 9140bfb5b26dd78203160de344a5b08e3a63e027 (diff) | |
Initial commit. Edited error messages in .c files
| -rw-r--r-- | ports/atmel-samd/common-hal/busio/I2C.c | 2 | ||||
| -rw-r--r-- | ports/esp32s2/common-hal/busio/I2C.c | 2 | ||||
| -rw-r--r-- | ports/mimxrt10xx/common-hal/busio/I2C.c | 2 | ||||
| -rw-r--r-- | ports/nrf/common-hal/busio/I2C.c | 2 | ||||
| -rw-r--r-- | ports/raspberrypi/common-hal/busio/I2C.c | 2 |
5 files changed, 5 insertions, 5 deletions
diff --git a/ports/atmel-samd/common-hal/busio/I2C.c b/ports/atmel-samd/common-hal/busio/I2C.c index ffe74a274..2551f7bf1 100644 --- a/ports/atmel-samd/common-hal/busio/I2C.c +++ b/ports/atmel-samd/common-hal/busio/I2C.c @@ -97,7 +97,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if (!gpio_get_pin_level(sda->number) || !gpio_get_pin_level(scl->number)) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/esp32s2/common-hal/busio/I2C.c b/ports/esp32s2/common-hal/busio/I2C.c index 772262d0a..8372eb8c3 100644 --- a/ports/esp32s2/common-hal/busio/I2C.c +++ b/ports/esp32s2/common-hal/busio/I2C.c @@ -85,7 +85,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if (gpio_get_level(sda->number) == 0 || gpio_get_level(scl->number) == 0) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/mimxrt10xx/common-hal/busio/I2C.c b/ports/mimxrt10xx/common-hal/busio/I2C.c index aaa2549a8..c8daddc4b 100644 --- a/ports/mimxrt10xx/common-hal/busio/I2C.c +++ b/ports/mimxrt10xx/common-hal/busio/I2C.c @@ -110,7 +110,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if( !GPIO_PinRead(sda->gpio, sda->number) || !GPIO_PinRead(scl->gpio, scl->number)) { common_hal_reset_pin(sda); common_hal_reset_pin(scl); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/nrf/common-hal/busio/I2C.c b/ports/nrf/common-hal/busio/I2C.c index 37cb192df..654fa857f 100644 --- a/ports/nrf/common-hal/busio/I2C.c +++ b/ports/nrf/common-hal/busio/I2C.c @@ -131,7 +131,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, const mcu_pin_obj_t * if (!nrf_gpio_pin_read(sda->number) || !nrf_gpio_pin_read(scl->number)) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/raspberrypi/common-hal/busio/I2C.c b/ports/raspberrypi/common-hal/busio/I2C.c index fa49e375e..26a7f3807 100644 --- a/ports/raspberrypi/common-hal/busio/I2C.c +++ b/ports/raspberrypi/common-hal/busio/I2C.c @@ -90,7 +90,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if (!gpio_get(sda->number) || !gpio_get(scl->number)) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif |