Merge pull request #1858 from rafa-gould/korean_trans

Created Korean Translations 

13 files changed, 2780 insertions, 80 deletions

diff --git a/locale/ID.po b/locale/ID.po
index 9c70789af..9cdbb64ef 100644
--- a/locale/ID.po
+++ b/locale/ID.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1138,7 +1138,7 @@ msgid "Running in safe mode! Not running saved code.\n"
 msgstr ""
 "Berjalan di mode aman(safe mode)! tidak menjalankan kode yang tersimpan.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA atau SCL membutuhkan pull up"
 
@@ -2765,7 +2765,7 @@ msgstr ""
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Gagal untuk mendapatkan mutex, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Gagal untuk menambahkan karakteristik, status: 0x%08lX"
 
@@ -2773,7 +2773,7 @@ msgstr ""
 #~ msgid "Failed to add service"
 #~ msgstr "Gagal untuk menambahkan layanan, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Gagal untuk menambahkan layanan, status: 0x%08lX"
 
@@ -2789,7 +2789,7 @@ msgstr ""
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Gagal untuk melanjutkan scanning, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Gagal untuk melanjutkan scanning, status: 0x%08lX"
 
@@ -2813,7 +2813,7 @@ msgstr ""
 #~ msgid "Failed to start advertising"
 #~ msgstr "Gagal untuk memulai advertisement, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Gagal untuk memulai advertisement, status: 0x%08lX"
 
@@ -2825,7 +2825,7 @@ msgstr ""
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Gagal untuk memberhentikan advertisement, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Gagal untuk memberhentikan advertisement, status: 0x%08lX"
 
@@ -2878,7 +2878,7 @@ msgstr ""
 #~ msgid "STA required"
 #~ msgstr "STA dibutuhkan"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Dukungan soft device, id: 0x%08lX, pc: 0x%08l"
 
diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 34aa3ff0a..2c01026f9 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1119,7 +1119,7 @@ msgstr ""
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
diff --git a/locale/de_DE.po b/locale/de_DE.po
index afe97ff9f..38a6dffb6 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: Pascal Deneaux\n"
 "Language-Team: Sebastian Plamauer, Pascal Deneaux\n"
@@ -736,7 +736,9 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
-msgstr "Die aufgezeichnete Frequenz liegt über der Leistungsgrenze. Aufnahme angehalten."
+msgstr ""
+"Die aufgezeichnete Frequenz liegt über der Leistungsgrenze. Aufnahme "
+"angehalten."
 
 #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
 #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
@@ -1140,7 +1142,7 @@ msgstr "Sicherheitsmodus aktiv! Automatisches Neuladen ist deaktiviert.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Sicherheitsmodus aktiv! Gespeicherter Code wird nicht ausgeführt\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA oder SCL brauchen pull up"
 
@@ -2816,14 +2818,12 @@ msgstr ""
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Akquirieren des Mutex gescheitert"
 
-#, c-format
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Hinzufügen des Characteristic ist gescheitert. Status: 0x%04x"
 
 #~ msgid "Failed to add service"
 #~ msgstr "Dienst konnte nicht hinzugefügt werden"
 
-#, c-format
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Dienst konnte nicht hinzugefügt werden. Status: 0x%04x"
 
@@ -2836,7 +2836,6 @@ msgstr ""
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Der Scanvorgang kann nicht fortgesetzt werden"
 
-#, c-format
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Der Scanvorgang kann nicht fortgesetzt werden. Status: 0x%04x"
 
@@ -2852,18 +2851,15 @@ msgstr ""
 #~ msgid "Failed to release mutex"
 #~ msgstr "Loslassen des Mutex gescheitert"
 
-#, c-format
 #~ msgid "Failed to set device name, err 0x%04x"
 #~ msgstr "Gerätename konnte nicht gesetzt werden, Status: 0x%04x"
 
 #~ msgid "Failed to start advertising"
 #~ msgstr "Kann advertisement nicht starten"
 
-#, c-format
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Kann advertisement nicht starten. Status: 0x%04x"
 
-#, c-format
 #~ msgid "Failed to start pairing, error 0x%04x"
 #~ msgstr "Starten des Koppelns fehlgeschlagen, Status: 0x%04x"
 
@@ -2873,7 +2869,6 @@ msgstr ""
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Kann advertisement nicht stoppen"
 
-#, c-format
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Kann advertisement nicht stoppen. Status: 0x%04x"
 
diff --git a/locale/en_US.po b/locale/en_US.po
index b30e17cec..9408102d6 100644
--- a/locale/en_US.po
+++ b/locale/en_US.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -1119,7 +1119,7 @@ msgstr ""
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
diff --git a/locale/en_x_pirate.po b/locale/en_x_pirate.po
index f9bb0a400..6bf2d84a4 100644
--- a/locale/en_x_pirate.po
+++ b/locale/en_x_pirate.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: @sommersoft, @MrCertainly\n"
@@ -1123,7 +1123,7 @@ msgstr "Runnin' in safe mode! Auto-reload be off.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Runnin' in safe mode! Nay runnin' saved code.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
diff --git a/locale/es.po b/locale/es.po
index 8bcfcedbe..449e88a80 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: 2018-08-24 22:56-0500\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -1145,7 +1145,7 @@ msgstr "Ejecutando en modo seguro! La auto-recarga esta deshabilitada.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Ejecutando en modo seguro! No se esta ejecutando el código guardado.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA o SCL necesitan una pull up"
 
@@ -2815,7 +2815,7 @@ msgstr "paso cero"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "No se puede adquirir el mutex, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Fallo al añadir caracteristica, err: 0x%08lX"
 
@@ -2823,7 +2823,6 @@ msgstr "paso cero"
 #~ msgid "Failed to add service"
 #~ msgstr "No se puede detener el anuncio. status: 0x%02x"
 
-#, c-format
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Fallo al agregar servicio. err: 0x%02x"
 
@@ -2838,7 +2837,6 @@ msgstr "paso cero"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "No se puede iniciar el escaneo. status: 0x%02x"
 
-#, c-format
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "No se puede iniciar el escaneo. err: 0x%02x"
 
@@ -2862,7 +2860,6 @@ msgstr "paso cero"
 #~ msgid "Failed to start advertising"
 #~ msgstr "No se puede inicar el anuncio. status: 0x%02x"
 
-#, c-format
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "No se puede inicar el anuncio. err: 0x%04x"
 
@@ -2874,7 +2871,6 @@ msgstr "paso cero"
 #~ msgid "Failed to stop advertising"
 #~ msgstr "No se puede detener el anuncio. status: 0x%02x"
 
-#, c-format
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "No se puede detener el anuncio. err: 0x%04x"
 
@@ -2952,7 +2948,6 @@ msgstr "paso cero"
 #~ msgid "STA required"
 #~ msgstr "STA requerido"
 
-#, c-format
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 
diff --git a/locale/fil.po b/locale/fil.po
index 2223ee779..57b633890 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -1151,7 +1151,7 @@ msgstr "Tumatakbo sa safe mode! Awtomatikong pag re-reload ay OFF.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Tumatakbo sa safe mode! Hindi tumatakbo ang nai-save na code.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "Kailangan ng pull up resistors ang SDA o SCL"
 
@@ -2820,7 +2820,7 @@ msgstr "zero step"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Nabigo sa pag kuha ng mutex, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Nabigo sa paglagay ng characteristic, status: 0x%08lX"
 
@@ -2828,7 +2828,7 @@ msgstr "zero step"
 #~ msgid "Failed to add service"
 #~ msgstr "Hindi matagumpay ang paglagay ng service, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Hindi matagumpay ang paglagay ng service, status: 0x%08lX"
 
@@ -2844,7 +2844,7 @@ msgstr "zero step"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Hindi maituloy ang pag scan, status: 0x%0xlX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Hindi maituloy ang pag scan, status: 0x%0xlX"
 
@@ -2868,7 +2868,7 @@ msgstr "zero step"
 #~ msgid "Failed to start advertising"
 #~ msgstr "Hindi masimulaan ang advertisement, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Hindi masimulaan ang advertisement, status: 0x%08lX"
 
@@ -2880,7 +2880,7 @@ msgstr "zero step"
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Hindi mahinto ang advertisement, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Hindi mahinto ang advertisement, status: 0x%08lX"
 
diff --git a/locale/fr.po b/locale/fr.po
index 913637675..bad559397 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: 2019-04-14 20:05+0100\n"
 "Last-Translator: Pierrick Couturier <arofarn@arofarn.info>\n"
 "Language-Team: fr\n"
@@ -1166,7 +1166,7 @@ msgstr "Mode sans-échec! Auto-chargement désactivé.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Mode sans-échec! Le code sauvegardé n'est pas éxecuté.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')"
 
@@ -2868,7 +2868,7 @@ msgstr "'step' nul"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Echec de l'obtention de mutex"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Echec de l'ajout de caractéristique, err 0x%04x"
 
@@ -2876,7 +2876,7 @@ msgstr "'step' nul"
 #~ msgid "Failed to add service"
 #~ msgstr "Echec de l'ajout de service"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Echec de l'ajout de service, err 0x%04x"
 
@@ -2892,7 +2892,7 @@ msgstr "'step' nul"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Impossible de poursuivre le scan"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Impossible de poursuivre le scan, err 0x%04x"
 
@@ -2916,7 +2916,7 @@ msgstr "'step' nul"
 #~ msgid "Failed to start advertising"
 #~ msgstr "Echec du démarrage de la diffusion"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Impossible de commencer à diffuser, err 0x%04x"
 
@@ -2928,7 +2928,7 @@ msgstr "'step' nul"
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Echec de l'arrêt de diffusion"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Echec de l'arrêt de diffusion, err 0x%04x"
 
@@ -3003,7 +3003,6 @@ msgstr "'step' nul"
 #~ msgid "STA required"
 #~ msgstr "'STA' requis"
 
-#, c-format
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Assertion en mode 'soft-device', id: 0x%08lX, pc: 0x%08lX"
 
diff --git a/locale/it_IT.po b/locale/it_IT.po
index d4035fdf0..c280b0e87 100644
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -1155,7 +1155,7 @@ msgstr "Modalità sicura in esecuzione! Auto-reload disattivato.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Modalità sicura in esecuzione! Codice salvato non in esecuzione.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA o SCL necessitano un pull-up"
 
@@ -2824,7 +2824,7 @@ msgstr "zero step"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Impossibile allocare buffer RX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
@@ -2832,7 +2832,7 @@ msgstr "zero step"
 #~ msgid "Failed to add service"
 #~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
@@ -2848,7 +2848,7 @@ msgstr "zero step"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Impossible iniziare la scansione. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Impossible iniziare la scansione. status: 0x%02x"
 
@@ -2872,7 +2872,7 @@ msgstr "zero step"
 #~ msgid "Failed to start advertising"
 #~ msgstr "Impossibile avviare advertisement. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Impossibile avviare advertisement. status: 0x%02x"
 
@@ -2884,7 +2884,7 @@ msgstr "zero step"
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
diff --git a/locale/ko.po b/locale/ko.po
new file mode 100644
index 000000000..fa67fda82
--- /dev/null
+++ b/locale/ko.po
@@ -0,0 +1,2725 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# 글라파, 2019.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
+"PO-Revision-Date: 2019-05-06 14:22-0700\n"
+"Last-Translator: \n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: ko\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: main.c
+msgid ""
+"\n"
+"Code done running. Waiting for reload.\n"
+msgstr ""
+"\n"
+"실행 완료 코드. 재장전 을 기다리는 중입니다\n"
+
+#: py/obj.c
+msgid "  File \"%q\""
+msgstr " 파일 \"%q\""
+
+#: py/obj.c
+msgid "  File \"%q\", line %d"
+msgstr "  파일 \"%q\", 라인 %d"
+
+#: main.c
+msgid " output:\n"
+msgstr " 산출:\n"
+
+#: py/objstr.c
+#, c-format
+msgid "%%c requires int or char"
+msgstr "%%c 전수(int)또는 캐릭터(char)필요합니다"
+
+#: shared-bindings/microcontroller/Pin.c
+msgid "%q in use"
+msgstr "%q 사용 중입니다"
+
+#: py/obj.c
+msgid "%q index out of range"
+msgstr "%q 인덱스 범위를 벗어났습니다"
+
+#: py/obj.c
+msgid "%q indices must be integers, not %s"
+msgstr "%q 인덱스는 %s 가 아닌 정수 여야합니다"
+
+#: shared-bindings/_bleio/CharacteristicBuffer.c
+#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+msgid "%q must be >= 1"
+msgstr "%q 는 >=1이어야합니다"
+
+#: shared-bindings/fontio/BuiltinFont.c
+msgid "%q should be an int"
+msgstr "%q 는 정수(int) 여야합니다"
+
+#: py/bc.c py/objnamedtuple.c
+msgid "%q() takes %d positional arguments but %d were given"
+msgstr ""
+
+#: py/argcheck.c
+msgid "'%q' argument required"
+msgstr ""
+
+#: py/emitinlinethumb.c py/emitinlinextensa.c
+#, c-format
+msgid "'%s' expects a label"
+msgstr "'%s' 에는 라벨이 필요합니다"
+
+#: py/emitinlinethumb.c py/emitinlinextensa.c
+#, c-format
+msgid "'%s' expects a register"
+msgstr "'%s%' 에는 레지스터가 필요합니다"
+
+#: py/emitinlinethumb.c
+#, c-format
+msgid "'%s' expects a special register"
+msgstr "'%s' 에는 특별한 레지스터가 필요합니다"
+
+#: py/emitinlinethumb.c
+#, c-format
+msgid "'%s' expects an FPU register"
+msgstr "'%s' 에는 FPU레지스터가 필요합니다"
+
+#: py/emitinlinethumb.c
+#, c-format
+msgid "'%s' expects an address of the form [a, b]"
+msgstr ""
+
+#: py/emitinlinethumb.c py/emitinlinextensa.c
+#, c-format
+msgid "'%s' expects an integer"
+msgstr "'%s' 는 정수 여야합니다"
+
+#: py/emitinlinethumb.c
+#, c-format
+msgid "'%s' expects at most r%d"
+msgstr ""
+
+#: py/emitinlinethumb.c
+#, c-format
+msgid "'%s' expects {r0, r1, ...}"
+msgstr "'%s' {r0, r1, ...}은 을 기대합니다"
+
+#: py/emitinlinextensa.c
+#, c-format
+msgid "'%s' integer %d is not within range %d..%d"
+msgstr ""
+
+#: py/emitinlinethumb.c
+#, c-format
+msgid "'%s' integer 0x%x does not fit in mask 0x%x"
+msgstr ""
+
+#: py/obj.c
+#, c-format
+msgid "'%s' object does not support item assignment"
+msgstr "'%s' 을 지정할 수 없습니다"
+
+#: py/obj.c
+#, c-format
+msgid "'%s' object does not support item deletion"
+msgstr "'%s' 은 삭제할 수 없습니다"
+
+#: py/runtime.c
+msgid "'%s' object has no attribute '%q'"
+msgstr ""
+
+#: py/runtime.c
+#, c-format
+msgid "'%s' object is not an iterator"
+msgstr "'%s' 은 수정할 수 없습니다"
+
+#: py/objtype.c py/runtime.c
+#, c-format
+msgid "'%s' object is not callable"
+msgstr "'%s' 을 검색 할 수 없습니다"
+
+#: py/runtime.c
+#, c-format
+msgid "'%s' object is not iterable"
+msgstr "'%s' 은 변경할 수 없습니다"
+
+#: py/obj.c
+#, c-format
+msgid "'%s' object is not subscriptable"
+msgstr ""
+
+#: py/objstr.c
+msgid "'=' alignment not allowed in string format specifier"
+msgstr ""
+
+#: shared-module/struct/__init__.c
+msgid "'S' and 'O' are not supported format types"
+msgstr ""
+
+#: py/compile.c
+msgid "'align' requires 1 argument"
+msgstr "'align' 에는 1 개의 독립변수가 필요합니다"
+
+#: py/compile.c
+msgid "'await' outside function"
+msgstr "'await' 는 펑크션 외부에 있습니다"
+
+#: py/compile.c
+msgid "'break' outside loop"
+msgstr "'break' 는 루프 외부에 있습니다"
+
+#: py/compile.c
+msgid "'continue' outside loop"
+msgstr "'continue' 는 루프 외부에 있습니다"
+
+#: py/compile.c
+msgid "'data' requires at least 2 arguments"
+msgstr "'data' 에는 >=2 개의 독립변수가 필요합니다"
+
+#: py/compile.c
+msgid "'data' requires integer arguments"
+msgstr ""
+
+#: py/compile.c
+msgid "'label' requires 1 argument"
+msgstr "'label' 에는 1 개의 독립변수가 필요합니다"
+
+#: py/compile.c
+msgid "'return' outside function"
+msgstr "'return' 는 함수 외부에 존재합니다"
+
+#: py/compile.c
+msgid "'yield' outside function"
+msgstr "'yield' 는 함수 외부에 존재합니다"
+
+#: py/compile.c
+msgid "*x must be assignment target"
+msgstr ""
+
+#: py/obj.c
+msgid ", in %q\n"
+msgstr ", 에서 %q\n"
+
+#: py/objcomplex.c
+msgid "0.0 to a complex power"
+msgstr ""
+
+#: py/modbuiltins.c
+msgid "3-arg pow() not supported"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
+msgid "A hardware interrupt channel is already in use"
+msgstr ""
+
+#: shared-bindings/_bleio/Address.c
+#, c-format
+msgid "Address must be %d bytes long"
+msgstr ""
+
+#: shared-bindings/_bleio/Address.c
+msgid "Address type out of range"
+msgstr ""
+
+#: ports/nrf/common-hal/busio/I2C.c
+msgid "All I2C peripherals are in use"
+msgstr "사용중인 모든 I2C주변 기기"
+
+#: ports/nrf/common-hal/busio/SPI.c
+msgid "All SPI peripherals are in use"
+msgstr "사용중인 모든 SPI주변 기기"
+
+#: ports/nrf/common-hal/busio/UART.c
+msgid "All UART peripherals are in use"
+msgstr "사용중인 모든 UART주변 기기"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+msgid "All event channels in use"
+msgstr ""
+
+#: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
+msgid "All sync event channels in use"
+msgstr ""
+
+#: shared-bindings/pulseio/PWMOut.c
+msgid "All timers for this pin are in use"
+msgstr "핀의 모든 타이머가 사용 중입니다"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
+#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
+#: ports/nrf/common-hal/pulseio/PulseOut.c shared-bindings/pulseio/PWMOut.c
+#: shared-module/_pew/PewPew.c
+msgid "All timers in use"
+msgstr "모든 타이머가 사용 중입니다"
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "Already advertising."
+msgstr ""
+
+#: ports/nrf/common-hal/analogio/AnalogOut.c
+msgid "AnalogOut functionality not supported"
+msgstr ""
+
+#: shared-bindings/analogio/AnalogOut.c
+msgid "AnalogOut is only 16 bits. Value must be less than 65536."
+msgstr ""
+
+#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+msgid "AnalogOut not supported on given pin"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
+msgid "Another send is already active"
+msgstr ""
+
+#: shared-bindings/pulseio/PulseOut.c
+msgid "Array must contain halfwords (type 'H')"
+msgstr ""
+
+#: shared-bindings/nvm/ByteArray.c
+msgid "Array values should be single bytes."
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgstr ""
+
+#: main.c
+msgid "Auto-reload is off.\n"
+msgstr "자동 재 장전이 꺼져 있습니다\n"
+
+#: main.c
+msgid ""
+"Auto-reload is on. Simply save files over USB to run them or enter REPL to "
+"disable.\n"
+msgstr ""
+"자동 새로 고침이 켜져 있습니다. USB를 통해 파일을 저장하여 실행하십시오. 비활"
+"성화하려면 REPL을 입력하십시오.\n"
+
+#: shared-module/displayio/Display.c
+msgid "Below minimum frame rate"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
+msgid "Bit clock and word select must share a clock unit"
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c
+msgid "Bit depth must be multiple of 8."
+msgstr ""
+
+#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
+msgid "Both pins must support hardware interrupts"
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Brightness must be 0-1.0"
+msgstr ""
+
+#: shared-bindings/supervisor/__init__.c
+msgid "Brightness must be between 0 and 255"
+msgstr "밝기는 0에서 255 사이 여야합니다"
+
+#: shared-bindings/displayio/Display.c
+msgid "Brightness not adjustable"
+msgstr "밝기를 조절할 수 없습니다"
+
+#: shared-bindings/_bleio/UUID.c
+#, c-format
+msgid "Buffer + offset too small %d %d %d"
+msgstr ""
+
+#: shared-module/usb_hid/Device.c
+#, c-format
+msgid "Buffer incorrect size. Should be %d bytes."
+msgstr "잘못된 크기의 버퍼. %d 바이트 여야합니다."
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
+#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
+#, c-format
+msgid "Buffer length %d too big. It must be less than %d"
+msgstr ""
+
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
+msgid "Buffer must be at least length 1"
+msgstr "잘못된 크기의 버퍼. >1 여야합니다"
+
+#: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/nrf/common-hal/displayio/ParallelBus.c
+#, c-format
+msgid "Bus pin %d is already in use"
+msgstr ""
+
+#: shared-bindings/_bleio/UUID.c
+msgid "Byte buffer must be 16 bytes."
+msgstr "잘못된 크기의 버퍼. 16 바이트 여야합니다."
+
+#: shared-bindings/nvm/ByteArray.c
+msgid "Bytes must be between 0 and 255."
+msgstr "바이트는 0에서 255 사이 여야합니다."
+
+#: py/objtype.c
+msgid "Call super().__init__() before accessing native object."
+msgstr ""
+
+#: shared-bindings/_pixelbuf/PixelBuf.c
+#, c-format
+msgid "Can not use dotstar with %s"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Characteristic.c
+msgid "Can't set CCCD on local Characteristic"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c shared-bindings/pulseio/PulseIn.c
+msgid "Cannot delete values"
+msgstr "값을 삭제할 수 없습니다"
+
+#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
+#: ports/nrf/common-hal/digitalio/DigitalInOut.c
+msgid "Cannot get pull while in output mode"
+msgstr ""
+
+#: ports/nrf/common-hal/microcontroller/Processor.c
+msgid "Cannot get temperature"
+msgstr "온도 데이터를 수신 할 수 없습니다"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+msgid "Cannot output both channels on the same pin"
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c
+msgid "Cannot read without MISO pin."
+msgstr "MISO핀이 없으면 읽을 수 없습니다"
+
+#: shared-bindings/audiobusio/PDMIn.c
+msgid "Cannot record to a file"
+msgstr "파일에 녹음 할 수 없습니다"
+
+#: shared-module/storage/__init__.c
+msgid "Cannot remount '/' when USB is active."
+msgstr ""
+
+#: ports/atmel-samd/common-hal/microcontroller/__init__.c
+msgid "Cannot reset into bootloader because no bootloader is present."
+msgstr ""
+
+#: shared-bindings/digitalio/DigitalInOut.c
+msgid "Cannot set value when direction is input."
+msgstr ""
+
+#: py/objslice.c
+msgid "Cannot subclass slice"
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c
+msgid "Cannot transfer without MOSI and MISO pins."
+msgstr ""
+
+#: extmod/moductypes.c
+msgid "Cannot unambiguously get sizeof scalar"
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c
+msgid "Cannot write without MOSI pin."
+msgstr ""
+
+#: shared-bindings/_bleio/CharacteristicBuffer.c
+msgid "CharacteristicBuffer writing not provided"
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c
+msgid "Clock pin init failed."
+msgstr ""
+
+#: shared-module/bitbangio/I2C.c
+msgid "Clock stretch too long"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
+msgid "Clock unit in use"
+msgstr ""
+
+#: shared-bindings/_pew/PewPew.c
+msgid "Column entry must be digitalio.DigitalInOut"
+msgstr ""
+
+#: shared-bindings/displayio/I2CDisplay.c
+msgid "Command must be 0-255"
+msgstr ""
+
+#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/ParallelBus.c
+msgid "Command must be an int between 0 and 255"
+msgstr "명령은 0에서 255 사이의 정수(int) 여야합니다"
+
+#: shared-bindings/_bleio/Connection.c
+msgid ""
+"Connection has been disconnected and can no longer be used. Create a new "
+"connection."
+msgstr ""
+
+#: py/persistentcode.c
+msgid "Corrupt .mpy file"
+msgstr ""
+
+#: py/emitglue.c
+msgid "Corrupt raw code"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/UUID.c
+#, c-format
+msgid "Could not decode ble_uuid, err 0x%04x"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/busio/UART.c
+msgid "Could not initialize UART"
+msgstr ""
+
+#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+msgid "Couldn't allocate first buffer"
+msgstr ""
+
+#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+msgid "Couldn't allocate second buffer"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Crash into the HardFault_Handler.\n"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+msgid "DAC already in use"
+msgstr "DAC가 현재 사용 중입니다"
+
+#: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/nrf/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned"
+msgstr ""
+
+#: shared-module/audiocore/WaveFile.c
+msgid "Data chunk must follow fmt chunk"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "Data too large for advertisement packet"
+msgstr "광고 (브로드 캐스트) 패킷에 대한 데이터가 너무 큽니다"
+
+#: shared-bindings/audiobusio/PDMIn.c
+msgid "Destination capacity is smaller than destination_length."
+msgstr ""
+
+#: ports/nrf/common-hal/audiobusio/I2SOut.c
+msgid "Device in use"
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+#: shared-bindings/displayio/EPaperDisplay.c
+msgid "Display rotation must be in 90 degree increments"
+msgstr ""
+
+#: shared-bindings/digitalio/DigitalInOut.c
+msgid "Drive mode not used when direction is input."
+msgstr ""
+
+#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/atmel-samd/common-hal/ps2io/Ps2.c
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+msgid "EXTINT channel already in use"
+msgstr ""
+
+#: extmod/modure.c
+msgid "Error in regex"
+msgstr "Regex에 오류가 있습니다."
+
+#: shared-bindings/microcontroller/Pin.c
+#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c
+#: shared-bindings/terminalio/Terminal.c
+msgid "Expected a %q"
+msgstr "%q 이 예상되었습니다."
+
+#: shared-bindings/_bleio/CharacteristicBuffer.c
+#: shared-bindings/_bleio/Descriptor.c
+msgid "Expected a Characteristic"
+msgstr "특성(Characteristic)이 예상되었습니다."
+
+#: shared-bindings/_bleio/Characteristic.c
+msgid "Expected a Service"
+msgstr ""
+
+#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Service.c
+msgid "Expected a UUID"
+msgstr "UUID이 예상되었습니다."
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "Expected an Address"
+msgstr ""
+
+#: shared-module/_pixelbuf/PixelBuf.c
+#, c-format
+msgid "Expected tuple of length %d, got %d"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Failed initiate attribute read, err 0x%04x"
+msgstr ""
+
+#: shared-bindings/ps2io/Ps2.c
+msgid "Failed sending command."
+msgstr ""
+
+#: ports/nrf/sd_mutex.c
+#, c-format
+msgid "Failed to acquire mutex, err 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Service.c
+msgid "Failed to add characteristic, NRF_ERROR_%q"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Characteristic.c
+#, c-format
+msgid "Failed to add descriptor, err 0x%04x"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+msgid "Failed to allocate RX buffer"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/nrf/common-hal/pulseio/PulseIn.c
+#, c-format
+msgid "Failed to allocate RX buffer of %d bytes"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "Failed to change softdevice state, NRF_ERROR_%q"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "Failed to connect: internal error"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "Failed to connect: timeout"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Service.c
+msgid "Failed to create service, NRF_ERROR_%q"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Connection.c
+msgid "Failed to discover services"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "Failed to get local address"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "Failed to get softdevice state"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Characteristic.c
+#, c-format
+msgid "Failed to notify or indicate attribute value, err 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Connection.c
+msgid "Failed to pair"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Characteristic.c
+#, c-format
+msgid "Failed to read CCCD value, err 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Failed to read attribute value, err 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Failed to read gatts value, err 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/UUID.c
+#, c-format
+msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
+msgstr ""
+
+#: ports/nrf/sd_mutex.c
+#, c-format
+msgid "Failed to release mutex, err 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "Failed to start advertising, NRF_ERROR_%q"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+#, c-format
+msgid "Failed to start connecting, error 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Connection.c
+msgid "Failed to start pairing, NRF_ERROR_%q"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+#, c-format
+msgid "Failed to start scanning, err 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "Failed to stop advertising, NRF_ERROR_%q"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Characteristic.c
+#, c-format
+msgid "Failed to write CCCD, err 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Failed to write attribute value, err 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Failed to write gatts value, err 0x%04x"
+msgstr ""
+
+#: py/moduerrno.c
+msgid "File exists"
+msgstr ""
+
+#: ports/nrf/peripherals/nrf/nvm.c
+msgid "Flash erase failed"
+msgstr ""
+
+#: ports/nrf/peripherals/nrf/nvm.c
+#, c-format
+msgid "Flash erase failed to start, err 0x%04x"
+msgstr ""
+
+#: ports/nrf/peripherals/nrf/nvm.c
+msgid "Flash write failed"
+msgstr ""
+
+#: ports/nrf/peripherals/nrf/nvm.c
+#, c-format
+msgid "Flash write failed to start, err 0x%04x"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+msgid "Frequency captured is above capability. Capture Paused."
+msgstr ""
+
+#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
+#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
+msgid "Function requires lock"
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+#: shared-bindings/displayio/EPaperDisplay.c
+msgid "Group already used"
+msgstr ""
+
+#: shared-module/displayio/Group.c
+msgid "Group full"
+msgstr ""
+
+#: extmod/vfs_posix_file.c py/objstringio.c
+msgid "I/O operation on closed file"
+msgstr ""
+
+#: extmod/machine_i2c.c
+msgid "I2C operation not supported"
+msgstr ""
+
+#: py/persistentcode.c
+msgid ""
+"Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/"
+"mpy-update for more info."
+msgstr ""
+
+#: shared-bindings/_pew/PewPew.c
+msgid "Incorrect buffer size"
+msgstr ""
+
+#: py/moduerrno.c
+msgid "Input/output error"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
+msgid "Invalid %q pin"
+msgstr ""
+
+#: shared-module/displayio/OnDiskBitmap.c
+msgid "Invalid BMP file"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/pulseio/PWMOut.c
+#: ports/nrf/common-hal/pulseio/PWMOut.c shared-bindings/pulseio/PWMOut.c
+msgid "Invalid PWM frequency"
+msgstr ""
+
+#: py/moduerrno.c
+msgid "Invalid argument"
+msgstr ""
+
+#: shared-module/displayio/Bitmap.c
+msgid "Invalid bits per value"
+msgstr ""
+
+#: ports/nrf/common-hal/busio/UART.c
+msgid "Invalid buffer size"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+msgid "Invalid capture period. Valid range: 1 - 500"
+msgstr ""
+
+#: shared-bindings/audiomixer/Mixer.c
+msgid "Invalid channel count"
+msgstr ""
+
+#: shared-bindings/digitalio/DigitalInOut.c
+msgid "Invalid direction."
+msgstr ""
+
+#: shared-module/audiocore/WaveFile.c
+msgid "Invalid file"
+msgstr "파일이 유효하지 않습니다"
+
+#: shared-module/audiocore/WaveFile.c
+msgid "Invalid format chunk size"
+msgstr "형식 청크 크기가 잘못되었습니다"
+
+#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
+msgid "Invalid number of bits"
+msgstr "비트 수가 유효하지 않습니다"
+
+#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
+msgid "Invalid phase"
+msgstr "단계가 잘못되었습니다"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+#: ports/atmel-samd/common-hal/touchio/TouchIn.c
+#: shared-bindings/pulseio/PWMOut.c
+msgid "Invalid pin"
+msgstr "핀이 잘못되었습니다"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+msgid "Invalid pin for left channel"
+msgstr "왼쪽 채널 핀이 유효하지 않습니다"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+msgid "Invalid pin for right channel"
+msgstr "오른쪽 채널 핀이 잘못되었습니다"
+
+#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/SPI.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/nrf/common-hal/busio/I2C.c
+msgid "Invalid pins"
+msgstr "핀이 유효하지 않습니다"
+
+#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
+msgid "Invalid polarity"
+msgstr ""
+
+#: shared-bindings/_bleio/Characteristic.c
+msgid "Invalid properties"
+msgstr ""
+
+#: shared-bindings/microcontroller/__init__.c
+msgid "Invalid run mode."
+msgstr ""
+
+#: shared-module/_bleio/Attribute.c
+msgid "Invalid security_mode"
+msgstr ""
+
+#: shared-bindings/audiomixer/Mixer.c
+msgid "Invalid voice"
+msgstr ""
+
+#: shared-bindings/audiomixer/Mixer.c
+msgid "Invalid voice count"
+msgstr ""
+
+#: shared-module/audiocore/WaveFile.c
+msgid "Invalid wave file"
+msgstr ""
+
+#: py/compile.c
+msgid "LHS of keyword arg must be an id"
+msgstr ""
+
+#: shared-module/displayio/Group.c
+msgid "Layer already in a group."
+msgstr ""
+
+#: shared-module/displayio/Group.c
+msgid "Layer must be a Group or TileGrid subclass."
+msgstr ""
+
+#: py/objslice.c
+msgid "Length must be an int"
+msgstr "길이는 정수(int) 여야합니다"
+
+#: py/objslice.c
+msgid "Length must be non-negative"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"Looks like our core CircuitPython code crashed hard. Whoops!\n"
+"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
+" with the contents of your CIRCUITPY drive and this message:\n"
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c
+msgid "MISO pin init failed."
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c
+msgid "MOSI pin init failed."
+msgstr ""
+
+#: shared-module/displayio/Shape.c
+#, c-format
+msgid "Maximum x value when mirrored is %d"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "MicroPython fatal error.\n"
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c
+msgid "Microphone startup delay must be in range 0.0 to 1.0"
+msgstr ""
+
+#: shared-bindings/displayio/Group.c
+msgid "Must be a %q subclass."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Characteristic.c
+msgid "No CCCD for this Characteristic"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+msgid "No DAC on chip"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+msgid "No DMA channel found"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+msgid "No RX pin"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+msgid "No TX pin"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+msgid "No available clocks"
+msgstr ""
+
+#: shared-bindings/board/__init__.c
+msgid "No default %q bus"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/touchio/TouchIn.c
+msgid "No free GCLKs"
+msgstr ""
+
+#: shared-bindings/os/__init__.c
+msgid "No hardware random available"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/ps2io/Ps2.c
+msgid "No hardware support on clk pin"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+msgid "No hardware support on pin"
+msgstr ""
+
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
+#: py/moduerrno.c
+msgid "No space left on device"
+msgstr ""
+
+#: py/moduerrno.c
+msgid "No such file/directory"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#: shared-bindings/_bleio/CharacteristicBuffer.c
+msgid "Not connected"
+msgstr ""
+
+#: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c
+#: shared-bindings/audiopwmio/PWMAudioOut.c
+msgid "Not playing"
+msgstr ""
+
+#: shared-bindings/util.c
+msgid ""
+"Object has been deinitialized and can no longer be used. Create a new object."
+msgstr ""
+
+#: ports/nrf/common-hal/busio/UART.c
+msgid "Odd parity is not supported"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
+msgid "Only 8 or 16 bit mono with "
+msgstr ""
+
+#: shared-module/displayio/OnDiskBitmap.c
+#, c-format
+msgid ""
+"Only Windows format, uncompressed BMP supported: given header size is %d"
+msgstr ""
+
+#: shared-module/displayio/OnDiskBitmap.c
+#, c-format
+msgid ""
+"Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: "
+"%d bpp given"
+msgstr ""
+
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Only slices with step=1 (aka None) are supported"
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c
+msgid "Oversample must be multiple of 8."
+msgstr ""
+
+#: shared-bindings/pulseio/PWMOut.c
+msgid ""
+"PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)"
+msgstr ""
+
+#: shared-bindings/pulseio/PWMOut.c
+msgid ""
+"PWM frequency not writable when variable_frequency is False on construction."
+msgstr ""
+
+#: py/moduerrno.c
+msgid "Permission denied"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/analogio/AnalogIn.c
+#: ports/nrf/common-hal/analogio/AnalogIn.c
+msgid "Pin does not have ADC capabilities"
+msgstr ""
+
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Pixel beyond bounds of buffer"
+msgstr ""
+
+#: py/builtinhelp.c
+msgid "Plus any modules on the filesystem\n"
+msgstr ""
+
+#: shared-bindings/ps2io/Ps2.c
+msgid "Pop from an empty Ps2 buffer"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "Prefix buffer must be on the heap"
+msgstr ""
+
+#: main.c
+msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgstr ""
+
+#: shared-bindings/digitalio/DigitalInOut.c
+msgid "Pull not used when direction is output."
+msgstr ""
+
+#: ports/nrf/common-hal/rtc/RTC.c
+msgid "RTC calibration is not supported on this board"
+msgstr ""
+
+#: shared-bindings/time/__init__.c
+msgid "RTC is not supported on this board"
+msgstr ""
+
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Range out of bounds"
+msgstr ""
+
+#: shared-bindings/pulseio/PulseIn.c
+msgid "Read-only"
+msgstr ""
+
+#: extmod/vfs_fat.c py/moduerrno.c
+msgid "Read-only filesystem"
+msgstr ""
+
+#: shared-module/displayio/Bitmap.c
+msgid "Read-only object"
+msgstr ""
+
+#: shared-bindings/displayio/EPaperDisplay.c
+msgid "Refresh too soon"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+msgid "Right channel unsupported"
+msgstr ""
+
+#: shared-bindings/_pew/PewPew.c
+msgid "Row entry must be digitalio.DigitalInOut"
+msgstr ""
+
+#: main.c
+msgid "Running in safe mode! Auto-reload is off.\n"
+msgstr ""
+
+#: main.c
+msgid "Running in safe mode! Not running saved code.\n"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+msgid "SDA or SCL needs a pull up"
+msgstr ""
+
+#: shared-bindings/audiomixer/Mixer.c
+msgid "Sample rate must be positive"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
+#, c-format
+msgid "Sample rate too high. It must be less than %d"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "Scan already in progess. Stop with stop_scan."
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
+msgid "Serializer in use"
+msgstr ""
+
+#: shared-bindings/nvm/ByteArray.c
+msgid "Slice and value different lengths."
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/TileGrid.c shared-bindings/pulseio/PulseIn.c
+msgid "Slices not supported"
+msgstr ""
+
+#: extmod/modure.c
+msgid "Splitting with sub-captures"
+msgstr ""
+
+#: shared-bindings/supervisor/__init__.c
+msgid "Stack size must be at least 256"
+msgstr ""
+
+#: shared-bindings/multiterminal/__init__.c
+msgid "Stream missing readinto() or write() method."
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"The CircuitPython heap was corrupted because the stack was too small.\n"
+"Please increase stack size limits and press reset (after ejecting "
+"CIRCUITPY).\n"
+"If you didn't change the stack, then file an issue here with the contents of "
+"your CIRCUITPY drive:\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"The `microcontroller` module was used to boot into safe mode. Press reset to "
+"exit safe mode.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"The microcontroller's power dipped. Please make sure your power supply "
+"provides\n"
+"enough power for the whole circuit and press reset (after ejecting "
+"CIRCUITPY).\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"The reset button was pressed while booting CircuitPython. Press again to "
+"exit safe mode.\n"
+msgstr ""
+
+#: shared-module/audiomixer/MixerVoice.c
+msgid "The sample's bits_per_sample does not match the mixer's"
+msgstr ""
+
+#: shared-module/audiomixer/MixerVoice.c
+msgid "The sample's channel count does not match the mixer's"
+msgstr ""
+
+#: shared-module/audiomixer/MixerVoice.c
+msgid "The sample's sample rate does not match the mixer's"
+msgstr ""
+
+#: shared-module/audiomixer/MixerVoice.c
+msgid "The sample's signedness does not match the mixer's"
+msgstr ""
+
+#: shared-bindings/displayio/TileGrid.c
+msgid "Tile height must exactly divide bitmap height"
+msgstr ""
+
+#: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c
+msgid "Tile index out of bounds"
+msgstr ""
+
+#: shared-bindings/displayio/TileGrid.c
+msgid "Tile value out of bounds"
+msgstr ""
+
+#: shared-bindings/displayio/TileGrid.c
+msgid "Tile width must exactly divide bitmap width"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "To exit, please reset the board without "
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
+msgid "Too many channels in sample."
+msgstr ""
+
+#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/displayio/ParallelBus.c
+msgid "Too many display busses"
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+#: shared-bindings/displayio/EPaperDisplay.c
+msgid "Too many displays"
+msgstr ""
+
+#: py/obj.c
+msgid "Traceback (most recent call last):\n"
+msgstr ""
+
+#: shared-bindings/time/__init__.c
+msgid "Tuple or struct_time argument required"
+msgstr ""
+
+#: shared-module/usb_hid/Device.c
+msgid "USB Busy"
+msgstr ""
+
+#: shared-module/usb_hid/Device.c
+msgid "USB Error"
+msgstr ""
+
+#: shared-bindings/_bleio/UUID.c
+msgid "UUID integer value must be 0-0xffff"
+msgstr ""
+
+#: shared-bindings/_bleio/UUID.c
+msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
+msgstr "UUID문자열이 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'형식이 아닙니다"
+
+#: shared-bindings/_bleio/UUID.c
+msgid "UUID value is not str, int or byte buffer"
+msgstr ""
+"UUID값이 문자열(str), 정수(int) 또는 바이트버퍼가(byte buffer) 아닙니다"
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c
+msgid "Unable to allocate buffers for signed conversion"
+msgstr ""
+
+#: shared-module/displayio/I2CDisplay.c
+#, c-format
+msgid "Unable to find I2C Display at %x"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
+msgid "Unable to find free GCLK"
+msgstr ""
+
+#: py/parse.c
+msgid "Unable to init parser"
+msgstr "파서를 초기화(init) 할 수 없습니다"
+
+#: shared-module/displayio/OnDiskBitmap.c
+msgid "Unable to read color palette data"
+msgstr ""
+
+#: shared-bindings/nvm/ByteArray.c
+msgid "Unable to write to nvm."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/UUID.c
+msgid "Unexpected nrfx uuid type"
+msgstr ""
+
+#: shared-bindings/_pixelbuf/PixelBuf.c
+#, c-format
+msgid "Unmatched number of items on RHS (expected %d, got %d)."
+msgstr ""
+
+#: ports/atmel-samd/common-hal/busio/I2C.c
+msgid "Unsupported baudrate"
+msgstr ""
+
+#: shared-module/displayio/display_core.c
+msgid "Unsupported display bus type"
+msgstr ""
+
+#: shared-module/audiocore/WaveFile.c
+msgid "Unsupported format"
+msgstr ""
+
+#: py/moduerrno.c
+msgid "Unsupported operation"
+msgstr ""
+
+#: shared-bindings/digitalio/DigitalInOut.c
+msgid "Unsupported pull value."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Characteristic.c
+#: ports/nrf/common-hal/_bleio/Descriptor.c
+msgid "Value length != required fixed length"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Characteristic.c
+#: ports/nrf/common-hal/_bleio/Descriptor.c
+msgid "Value length > max_length"
+msgstr ""
+
+#: py/emitnative.c
+msgid "Viper functions don't currently support more than 4 arguments"
+msgstr ""
+
+#: main.c
+msgid "WARNING: Your code filename has two extensions\n"
+msgstr ""
+
+#: py/builtinhelp.c
+#, c-format
+msgid ""
+"Welcome to Adafruit CircuitPython %s!\n"
+"\n"
+"Please visit learn.adafruit.com/category/circuitpython for project guides.\n"
+"\n"
+"To list built-in modules please do `help(\"modules\")`.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"You are running in safe mode which means something unanticipated happened.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "You requested starting safe mode by "
+msgstr ""
+
+#: py/objtype.c
+msgid "__init__() should return None"
+msgstr ""
+
+#: py/objtype.c
+#, c-format
+msgid "__init__() should return None, not '%s'"
+msgstr ""
+
+#: py/objobject.c
+msgid "__new__ arg must be a user-type"
+msgstr ""
+
+#: extmod/modubinascii.c extmod/moduhashlib.c
+msgid "a bytes-like object is required"
+msgstr ""
+
+#: lib/embed/abort_.c
+msgid "abort() called"
+msgstr ""
+
+#: extmod/machine_mem.c
+#, c-format
+msgid "address %08x is not aligned to %d bytes"
+msgstr ""
+
+#: shared-bindings/i2cslave/I2CSlave.c
+msgid "address out of bounds"
+msgstr ""
+
+#: shared-bindings/i2cslave/I2CSlave.c
+msgid "addresses is empty"
+msgstr ""
+
+#: py/modbuiltins.c
+msgid "arg is an empty sequence"
+msgstr ""
+
+#: py/runtime.c
+msgid "argument has wrong type"
+msgstr ""
+
+#: py/argcheck.c shared-bindings/_stage/__init__.c
+#: shared-bindings/digitalio/DigitalInOut.c shared-bindings/gamepad/GamePad.c
+msgid "argument num/types mismatch"
+msgstr ""
+
+#: py/runtime.c
+msgid "argument should be a '%q' not a '%q'"
+msgstr ""
+
+#: py/objarray.c shared-bindings/nvm/ByteArray.c
+msgid "array/bytes required on right side"
+msgstr ""
+
+#: py/objstr.c
+msgid "attributes not supported yet"
+msgstr ""
+
+#: py/builtinevex.c
+msgid "bad compile mode"
+msgstr ""
+
+#: py/objstr.c
+msgid "bad conversion specifier"
+msgstr ""
+
+#: py/objstr.c
+msgid "bad format string"
+msgstr ""
+
+#: py/binary.c
+msgid "bad typecode"
+msgstr ""
+
+#: py/emitnative.c
+msgid "binary op %q not implemented"
+msgstr ""
+
+#: shared-bindings/busio/UART.c
+msgid "bits must be 7, 8 or 9"
+msgstr "비트(bits)는 7, 8 또는 9 여야합니다"
+
+#: extmod/machine_spi.c
+msgid "bits must be 8"
+msgstr "비트(bits)는 8이어야합니다"
+
+#: shared-bindings/audiomixer/Mixer.c
+msgid "bits_per_sample must be 8 or 16"
+msgstr "bits_per_sample은 8 또는 16이어야합니다."
+
+#: py/emitinlinethumb.c
+msgid "branch not in range"
+msgstr ""
+
+#: shared-bindings/_pixelbuf/PixelBuf.c
+#, c-format
+msgid "buf is too small. need %d bytes"
+msgstr ""
+
+#: shared-bindings/audiocore/RawSample.c
+msgid "buffer must be a bytes-like object"
+msgstr ""
+
+#: shared-module/struct/__init__.c
+msgid "buffer size must match format"
+msgstr ""
+
+#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
+msgid "buffer slices must be of equal length"
+msgstr ""
+
+#: py/modstruct.c shared-bindings/struct/__init__.c
+#: shared-module/struct/__init__.c
+msgid "buffer too small"
+msgstr ""
+
+#: extmod/machine_spi.c
+msgid "buffers must be the same length"
+msgstr ""
+
+#: shared-bindings/_pew/PewPew.c
+msgid "buttons must be digitalio.DigitalInOut"
+msgstr ""
+
+#: py/vm.c
+msgid "byte code not implemented"
+msgstr ""
+
+#: shared-bindings/_pixelbuf/PixelBuf.c
+#, c-format
+msgid "byteorder is not an instance of ByteOrder (got a %s)"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/busio/UART.c
+msgid "bytes > 8 bits not supported"
+msgstr ""
+
+#: py/objstr.c
+msgid "bytes value out of range"
+msgstr ""
+
+#: ports/atmel-samd/bindings/samd/Clock.c
+msgid "calibration is out of range"
+msgstr ""
+
+#: ports/atmel-samd/bindings/samd/Clock.c
+msgid "calibration is read only"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/rtc/RTC.c
+msgid "calibration value out of range +/-127"
+msgstr ""
+
+#: py/emitinlinethumb.c
+msgid "can only have up to 4 parameters to Thumb assembly"
+msgstr ""
+
+#: py/emitinlinextensa.c
+msgid "can only have up to 4 parameters to Xtensa assembly"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "can only save bytecode"
+msgstr ""
+
+#: py/objtype.c
+msgid "can't add special method to already-subclassed class"
+msgstr ""
+
+#: py/compile.c
+msgid "can't assign to expression"
+msgstr ""
+
+#: py/obj.c
+#, c-format
+msgid "can't convert %s to complex"
+msgstr ""
+
+#: py/obj.c
+#, c-format
+msgid "can't convert %s to float"
+msgstr ""
+
+#: py/obj.c
+#, c-format
+msgid "can't convert %s to int"
+msgstr ""
+
+#: py/objstr.c
+msgid "can't convert '%q' object to %q implicitly"
+msgstr ""
+
+#: py/objint.c
+msgid "can't convert NaN to int"
+msgstr ""
+
+#: shared-bindings/i2cslave/I2CSlave.c
+msgid "can't convert address to int"
+msgstr ""
+
+#: py/objint.c
+msgid "can't convert inf to int"
+msgstr ""
+
+#: py/obj.c
+msgid "can't convert to complex"
+msgstr ""
+
+#: py/obj.c
+msgid "can't convert to float"
+msgstr ""
+
+#: py/obj.c
+msgid "can't convert to int"
+msgstr ""
+
+#: py/objstr.c
+msgid "can't convert to str implicitly"
+msgstr ""
+
+#: py/compile.c
+msgid "can't declare nonlocal in outer code"
+msgstr ""
+
+#: py/compile.c
+msgid "can't delete expression"
+msgstr ""
+
+#: py/emitnative.c
+msgid "can't do binary op between '%q' and '%q'"
+msgstr ""
+
+#: py/objcomplex.c
+msgid "can't do truncated division of a complex number"
+msgstr ""
+
+#: py/compile.c
+msgid "can't have multiple **x"
+msgstr ""
+
+#: py/compile.c
+msgid "can't have multiple *x"
+msgstr ""
+
+#: py/emitnative.c
+msgid "can't implicitly convert '%q' to 'bool'"
+msgstr ""
+
+#: py/emitnative.c
+msgid "can't load from '%q'"
+msgstr ""
+
+#: py/emitnative.c
+msgid "can't load with '%q' index"
+msgstr ""
+
+#: py/objgenerator.c
+msgid "can't pend throw to just-started generator"
+msgstr ""
+
+#: py/objgenerator.c
+msgid "can't send non-None value to a just-started generator"
+msgstr ""
+
+#: py/objnamedtuple.c
+msgid "can't set attribute"
+msgstr ""
+
+#: py/emitnative.c
+msgid "can't store '%q'"
+msgstr ""
+
+#: py/emitnative.c
+msgid "can't store to '%q'"
+msgstr ""
+
+#: py/emitnative.c
+msgid "can't store with '%q' index"
+msgstr ""
+
+#: py/objstr.c
+msgid ""
+"can't switch from automatic field numbering to manual field specification"
+msgstr ""
+
+#: py/objstr.c
+msgid ""
+"can't switch from manual field specification to automatic field numbering"
+msgstr ""
+
+#: py/objtype.c
+msgid "cannot create '%q' instances"
+msgstr ""
+
+#: py/objtype.c
+msgid "cannot create instance"
+msgstr ""
+
+#: py/runtime.c
+msgid "cannot import name %q"
+msgstr ""
+
+#: py/builtinimport.c
+msgid "cannot perform relative import"
+msgstr ""
+
+#: py/emitnative.c
+msgid "casting"
+msgstr ""
+
+#: shared-bindings/_stage/Text.c
+msgid "chars buffer too small"
+msgstr ""
+
+#: py/modbuiltins.c
+msgid "chr() arg not in range(0x110000)"
+msgstr ""
+
+#: py/modbuiltins.c
+msgid "chr() arg not in range(256)"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c
+msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c
+msgid "color buffer must be a buffer or int"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c
+msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c
+msgid "color must be between 0x000000 and 0xffffff"
+msgstr ""
+
+#: shared-bindings/displayio/ColorConverter.c
+msgid "color should be an int"
+msgstr ""
+
+#: py/objcomplex.c
+msgid "complex division by zero"
+msgstr ""
+
+#: py/objfloat.c py/parsenum.c
+msgid "complex values not supported"
+msgstr ""
+
+#: extmod/moduzlib.c
+msgid "compression header"
+msgstr ""
+
+#: py/parse.c
+msgid "constant must be an integer"
+msgstr ""
+
+#: py/emitnative.c
+msgid "conversion to object"
+msgstr ""
+
+#: py/parsenum.c
+msgid "decimal numbers not supported"
+msgstr ""
+
+#: py/compile.c
+msgid "default 'except' must be last"
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c
+msgid ""
+"destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c
+msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c
+msgid "destination_length must be an int >= 0"
+msgstr ""
+
+#: py/objdict.c
+msgid "dict update sequence has wrong length"
+msgstr ""
+
+#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
+#: shared-bindings/math/__init__.c
+msgid "division by zero"
+msgstr ""
+
+#: py/objdeque.c
+msgid "empty"
+msgstr ""
+
+#: extmod/moduheapq.c extmod/modutimeq.c
+msgid "empty heap"
+msgstr ""
+
+#: py/objstr.c
+msgid "empty separator"
+msgstr ""
+
+#: shared-bindings/random/__init__.c
+msgid "empty sequence"
+msgstr ""
+
+#: py/objstr.c
+msgid "end of format while looking for conversion specifier"
+msgstr ""
+
+#: shared-bindings/displayio/Shape.c
+msgid "end_x should be an int"
+msgstr ""
+
+#: ports/nrf/common-hal/busio/UART.c
+#, c-format
+msgid "error = 0x%08lX"
+msgstr ""
+
+#: py/runtime.c
+msgid "exceptions must derive from BaseException"
+msgstr ""
+
+#: py/objstr.c
+msgid "expected ':' after format specifier"
+msgstr "':'이 예상되었습니다"
+
+#: py/obj.c
+msgid "expected tuple/list"
+msgstr "튜플(tuple) 또는 리스트(list)이 예상되었습니다"
+
+#: py/modthread.c
+msgid "expecting a dict for keyword args"
+msgstr "사전(dict)이 예상되었습니다"
+
+#: py/compile.c
+msgid "expecting an assembler instruction"
+msgstr ""
+
+#: py/compile.c
+msgid "expecting just a value for set"
+msgstr ""
+
+#: py/compile.c
+msgid "expecting key:value for dict"
+msgstr ""
+
+#: py/argcheck.c
+msgid "extra keyword arguments given"
+msgstr ""
+
+#: py/argcheck.c
+msgid "extra positional arguments given"
+msgstr ""
+
+#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/displayio/OnDiskBitmap.c
+msgid "file must be a file opened in byte mode"
+msgstr ""
+
+#: shared-bindings/storage/__init__.c
+msgid "filesystem must provide mount method"
+msgstr ""
+
+#: py/objtype.c
+msgid "first argument to super() must be type"
+msgstr ""
+
+#: extmod/machine_spi.c
+msgid "firstbit must be MSB"
+msgstr ""
+
+#: py/objint.c
+msgid "float too big"
+msgstr "float이 너무 큽니다"
+
+#: shared-bindings/_stage/Text.c
+msgid "font must be 2048 bytes long"
+msgstr ""
+
+#: py/objstr.c
+msgid "format requires a dict"
+msgstr ""
+
+#: py/objdeque.c
+msgid "full"
+msgstr "완전한(full)"
+
+#: py/argcheck.c
+msgid "function does not take keyword arguments"
+msgstr ""
+
+#: py/argcheck.c
+#, c-format
+msgid "function expected at most %d arguments, got %d"
+msgstr ""
+
+#: py/bc.c py/objnamedtuple.c
+msgid "function got multiple values for argument '%q'"
+msgstr ""
+
+#: py/argcheck.c
+#, c-format
+msgid "function missing %d required positional arguments"
+msgstr ""
+
+#: py/bc.c
+msgid "function missing keyword-only argument"
+msgstr ""
+
+#: py/bc.c
+msgid "function missing required keyword argument '%q'"
+msgstr ""
+
+#: py/bc.c
+#, c-format
+msgid "function missing required positional argument #%d"
+msgstr ""
+
+#: py/argcheck.c py/bc.c py/objnamedtuple.c
+#, c-format
+msgid "function takes %d positional arguments but %d were given"
+msgstr ""
+
+#: shared-bindings/time/__init__.c
+msgid "function takes exactly 9 arguments"
+msgstr ""
+
+#: py/objgenerator.c
+msgid "generator already executing"
+msgstr ""
+
+#: py/objgenerator.c
+msgid "generator ignored GeneratorExit"
+msgstr ""
+
+#: shared-bindings/_stage/Layer.c
+msgid "graphic must be 2048 bytes long"
+msgstr ""
+
+#: extmod/moduheapq.c
+msgid "heap must be a list"
+msgstr ""
+
+#: py/compile.c
+msgid "identifier redefined as global"
+msgstr ""
+
+#: py/compile.c
+msgid "identifier redefined as nonlocal"
+msgstr ""
+
+#: py/objstr.c
+msgid "incomplete format"
+msgstr ""
+
+#: py/objstr.c
+msgid "incomplete format key"
+msgstr ""
+
+#: extmod/modubinascii.c
+msgid "incorrect padding"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c
+msgid "index out of range"
+msgstr ""
+
+#: py/obj.c
+msgid "indices must be integers"
+msgstr ""
+
+#: py/compile.c
+msgid "inline assembler must be a function"
+msgstr ""
+
+#: py/parsenum.c
+msgid "int() arg 2 must be >= 2 and <= 36"
+msgstr ""
+
+#: py/objstr.c
+msgid "integer required"
+msgstr "정수가 필요합니다"
+
+#: shared-bindings/_bleio/Adapter.c
+#, c-format
+msgid "interval must be in range %s-%s"
+msgstr ""
+
+#: extmod/machine_i2c.c
+msgid "invalid I2C peripheral"
+msgstr "ICT주변 기기가 유효하지 않습니다"
+
+#: extmod/machine_spi.c
+msgid "invalid SPI peripheral"
+msgstr "SPI주변 기기가 유효하지 않습니다"
+
+#: lib/netutils/netutils.c
+msgid "invalid arguments"
+msgstr ""
+
+#: extmod/modussl_axtls.c
+msgid "invalid cert"
+msgstr "cert가 유효하지 않습니다"
+
+#: extmod/uos_dupterm.c
+msgid "invalid dupterm index"
+msgstr "Dupterm index가 유효하지 않습니다"
+
+#: extmod/modframebuf.c
+msgid "invalid format"
+msgstr "형식가 유효하지 않습니다"
+
+#: py/objstr.c
+msgid "invalid format specifier"
+msgstr "형식 지정자(format specifier)가 유효하지 않습니다"
+
+#: extmod/modussl_axtls.c
+msgid "invalid key"
+msgstr "키가 유효하지 않습니다"
+
+#: py/compile.c
+msgid "invalid micropython decorator"
+msgstr ""
+
+#: shared-bindings/random/__init__.c
+msgid "invalid step"
+msgstr "단계(step)가 유효하지 않습니다"
+
+#: py/compile.c py/parse.c
+msgid "invalid syntax"
+msgstr "구문(syntax)가 유효하지 않습니다"
+
+#: py/parsenum.c
+msgid "invalid syntax for integer"
+msgstr "구문(syntax)가 정수가 유효하지 않습니다"
+
+#: py/parsenum.c
+#, c-format
+msgid "invalid syntax for integer with base %d"
+msgstr "구문(syntax)가 정수가 유효하지 않습니다"
+
+#: py/parsenum.c
+msgid "invalid syntax for number"
+msgstr "숫자에 대한 구문(syntax)가 유효하지 않습니다"
+
+#: py/objtype.c
+msgid "issubclass() arg 1 must be a class"
+msgstr ""
+
+#: py/objtype.c
+msgid "issubclass() arg 2 must be a class or a tuple of classes"
+msgstr ""
+
+#: py/objstr.c
+msgid "join expects a list of str/bytes objects consistent with self object"
+msgstr ""
+
+#: py/argcheck.c
+msgid "keyword argument(s) not yet implemented - use normal args instead"
+msgstr ""
+
+#: py/bc.c
+msgid "keywords must be strings"
+msgstr ""
+
+#: py/emitinlinethumb.c py/emitinlinextensa.c
+msgid "label '%q' not defined"
+msgstr ""
+
+#: py/compile.c
+msgid "label redefined"
+msgstr ""
+
+#: py/stream.c
+msgid "length argument not allowed for this type"
+msgstr ""
+
+#: shared-bindings/audiomixer/MixerVoice.c
+msgid "level must be between 0 and 1"
+msgstr ""
+
+#: py/objarray.c
+msgid "lhs and rhs should be compatible"
+msgstr ""
+
+#: py/emitnative.c
+msgid "local '%q' has type '%q' but source is '%q'"
+msgstr ""
+
+#: py/emitnative.c
+msgid "local '%q' used before type known"
+msgstr ""
+
+#: py/vm.c
+msgid "local variable referenced before assignment"
+msgstr ""
+
+#: py/objint.c
+msgid "long int not supported in this build"
+msgstr ""
+
+#: shared-bindings/_stage/Layer.c
+msgid "map buffer too small"
+msgstr ""
+
+#: py/modmath.c shared-bindings/math/__init__.c
+msgid "math domain error"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Characteristic.c
+#: ports/nrf/common-hal/_bleio/Descriptor.c
+#, c-format
+msgid "max_length must be 0-%d when fixed_length is %s"
+msgstr ""
+
+#: py/runtime.c
+msgid "maximum recursion depth exceeded"
+msgstr ""
+
+#: py/runtime.c
+#, c-format
+msgid "memory allocation failed, allocating %u bytes"
+msgstr ""
+
+#: py/runtime.c
+msgid "memory allocation failed, heap is locked"
+msgstr ""
+
+#: py/builtinimport.c
+msgid "module not found"
+msgstr ""
+
+#: py/compile.c
+msgid "multiple *x in assignment"
+msgstr ""
+
+#: py/objtype.c
+msgid "multiple bases have instance lay-out conflict"
+msgstr ""
+
+#: py/objtype.c
+msgid "multiple inheritance not supported"
+msgstr ""
+
+#: py/emitnative.c
+msgid "must raise an object"
+msgstr ""
+
+#: extmod/machine_spi.c
+msgid "must specify all of sck/mosi/miso"
+msgstr ""
+
+#: py/modbuiltins.c
+msgid "must use keyword argument for key function"
+msgstr ""
+
+#: py/runtime.c
+msgid "name '%q' is not defined"
+msgstr ""
+
+#: py/runtime.c
+msgid "name not defined"
+msgstr ""
+
+#: py/compile.c
+msgid "name reused for argument"
+msgstr ""
+
+#: py/emitnative.c
+msgid "native yield"
+msgstr ""
+
+#: py/runtime.c
+#, c-format
+msgid "need more than %d values to unpack"
+msgstr ""
+
+#: py/objint_longlong.c py/objint_mpz.c py/runtime.c
+msgid "negative power with no float support"
+msgstr ""
+
+#: py/objint_mpz.c py/runtime.c
+msgid "negative shift count"
+msgstr ""
+
+#: py/vm.c
+msgid "no active exception to reraise"
+msgstr ""
+
+#: shared-bindings/socket/__init__.c shared-module/network/__init__.c
+msgid "no available NIC"
+msgstr ""
+
+#: py/compile.c
+msgid "no binding for nonlocal found"
+msgstr ""
+
+#: py/builtinimport.c
+msgid "no module named '%q'"
+msgstr ""
+
+#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/displayio/ParallelBus.c
+msgid "no reset pin available"
+msgstr ""
+
+#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+msgid "no such attribute"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/Connection.c
+msgid "non-UUID found in service_uuids_whitelist"
+msgstr ""
+
+#: py/compile.c
+msgid "non-default argument follows default argument"
+msgstr ""
+
+#: extmod/modubinascii.c
+msgid "non-hex digit found"
+msgstr ""
+
+#: py/compile.c
+msgid "non-keyword arg after */**"
+msgstr ""
+
+#: py/compile.c
+msgid "non-keyword arg after keyword arg"
+msgstr ""
+
+#: shared-bindings/_bleio/UUID.c
+msgid "not a 128-bit UUID"
+msgstr ""
+
+#: py/objstr.c
+msgid "not all arguments converted during string formatting"
+msgstr ""
+
+#: py/objstr.c
+msgid "not enough arguments for format string"
+msgstr ""
+
+#: py/obj.c
+#, c-format
+msgid "object '%s' is not a tuple or list"
+msgstr ""
+
+#: py/obj.c
+msgid "object does not support item assignment"
+msgstr ""
+
+#: py/obj.c
+msgid "object does not support item deletion"
+msgstr ""
+
+#: py/obj.c
+msgid "object has no len"
+msgstr ""
+
+#: py/obj.c
+msgid "object is not subscriptable"
+msgstr ""
+
+#: py/runtime.c
+msgid "object not an iterator"
+msgstr ""
+
+#: py/objtype.c py/runtime.c
+msgid "object not callable"
+msgstr ""
+
+#: py/sequence.c shared-bindings/displayio/Group.c
+msgid "object not in sequence"
+msgstr ""
+
+#: py/runtime.c
+msgid "object not iterable"
+msgstr ""
+
+#: py/obj.c
+#, c-format
+msgid "object of type '%s' has no len()"
+msgstr ""
+
+#: py/obj.c
+msgid "object with buffer protocol required"
+msgstr ""
+
+#: extmod/modubinascii.c
+msgid "odd-length string"
+msgstr ""
+
+#: py/objstr.c py/objstrunicode.c
+msgid "offset out of bounds"
+msgstr ""
+
+#: ports/nrf/common-hal/audiobusio/PDMIn.c
+msgid "only bit_depth=16 is supported"
+msgstr ""
+
+#: ports/nrf/common-hal/audiobusio/PDMIn.c
+msgid "only sample_rate=16000 is supported"
+msgstr ""
+
+#: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
+#: shared-bindings/nvm/ByteArray.c
+msgid "only slices with step=1 (aka None) are supported"
+msgstr ""
+
+#: py/modbuiltins.c
+msgid "ord expects a character"
+msgstr ""
+
+#: py/modbuiltins.c
+#, c-format
+msgid "ord() expected a character, but string of length %d found"
+msgstr ""
+
+#: py/objint_mpz.c
+msgid "overflow converting long int to machine word"
+msgstr ""
+
+#: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c
+msgid "palette must be 32 bytes long"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c
+msgid "palette_index should be an int"
+msgstr ""
+
+#: py/compile.c
+msgid "parameter annotation must be an identifier"
+msgstr ""
+
+#: py/emitinlinextensa.c
+msgid "parameters must be registers in sequence a2 to a5"
+msgstr ""
+
+#: py/emitinlinethumb.c
+msgid "parameters must be registers in sequence r0 to r3"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c
+msgid "pixel coordinates out of bounds"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c
+msgid "pixel value requires too many bits"
+msgstr ""
+
+#: shared-bindings/displayio/TileGrid.c
+msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/nrf/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr ""
+
+#: py/objset.c
+msgid "pop from an empty set"
+msgstr ""
+
+#: py/objlist.c
+msgid "pop from empty list"
+msgstr ""
+
+#: py/objdict.c
+msgid "popitem(): dictionary is empty"
+msgstr ""
+
+#: py/objint_mpz.c
+msgid "pow() 3rd argument cannot be 0"
+msgstr ""
+
+#: py/objint_mpz.c
+msgid "pow() with 3 arguments requires integers"
+msgstr ""
+
+#: extmod/modutimeq.c
+msgid "queue overflow"
+msgstr ""
+
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "rawbuf is not the same size as buf"
+msgstr ""
+
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "readonly attribute"
+msgstr ""
+
+#: py/builtinimport.c
+msgid "relative import"
+msgstr ""
+
+#: py/obj.c
+#, c-format
+msgid "requested length %d but object has length %d"
+msgstr ""
+
+#: py/compile.c
+msgid "return annotation must be an identifier"
+msgstr ""
+
+#: py/emitnative.c
+msgid "return expected '%q' but got '%q'"
+msgstr ""
+
+#: py/objstr.c
+msgid "rsplit(None,n)"
+msgstr ""
+
+#: shared-bindings/audiocore/RawSample.c
+msgid ""
+"sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or "
+"'B'"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
+msgid "sampling rate out of range"
+msgstr ""
+
+#: py/modmicropython.c
+msgid "schedule stack full"
+msgstr ""
+
+#: lib/utils/pyexec.c py/builtinimport.c
+msgid "script compilation not supported"
+msgstr ""
+
+#: py/objstr.c
+msgid "sign not allowed in string format specifier"
+msgstr ""
+
+#: py/objstr.c
+msgid "sign not allowed with integer format specifier 'c'"
+msgstr ""
+
+#: py/objstr.c
+msgid "single '}' encountered in format string"
+msgstr ""
+
+#: shared-bindings/time/__init__.c
+msgid "sleep length must be non-negative"
+msgstr ""
+
+#: py/objslice.c py/sequence.c
+msgid "slice step cannot be zero"
+msgstr ""
+
+#: py/objint.c py/sequence.c
+msgid "small int overflow"
+msgstr ""
+
+#: main.c
+msgid "soft reboot\n"
+msgstr ""
+
+#: py/objstr.c
+msgid "start/end indices"
+msgstr ""
+
+#: shared-bindings/displayio/Shape.c
+msgid "start_x should be an int"
+msgstr ""
+
+#: shared-bindings/random/__init__.c
+msgid "step must be non-zero"
+msgstr ""
+
+#: shared-bindings/busio/UART.c
+msgid "stop must be 1 or 2"
+msgstr ""
+
+#: shared-bindings/random/__init__.c
+msgid "stop not reachable from start"
+msgstr ""
+
+#: py/stream.c
+msgid "stream operation not supported"
+msgstr ""
+
+#: py/objstrunicode.c
+msgid "string index out of range"
+msgstr ""
+
+#: py/objstrunicode.c
+#, c-format
+msgid "string indices must be integers, not %s"
+msgstr ""
+
+#: py/stream.c
+msgid "string not supported; use bytes or bytearray"
+msgstr ""
+
+#: extmod/moductypes.c
+msgid "struct: cannot index"
+msgstr ""
+
+#: extmod/moductypes.c
+msgid "struct: index out of range"
+msgstr ""
+
+#: extmod/moductypes.c
+msgid "struct: no fields"
+msgstr ""
+
+#: py/objstr.c
+msgid "substring not found"
+msgstr ""
+
+#: py/compile.c
+msgid "super() can't find self"
+msgstr ""
+
+#: extmod/modujson.c
+msgid "syntax error in JSON"
+msgstr ""
+
+#: extmod/moductypes.c
+msgid "syntax error in uctypes descriptor"
+msgstr ""
+
+#: shared-bindings/touchio/TouchIn.c
+msgid "threshold must be in the range 0-65536"
+msgstr ""
+
+#: shared-bindings/time/__init__.c
+msgid "time.struct_time() takes a 9-sequence"
+msgstr ""
+
+#: shared-bindings/time/__init__.c
+msgid "time.struct_time() takes exactly 1 argument"
+msgstr ""
+
+#: shared-bindings/busio/UART.c
+msgid "timeout >100 (units are now seconds, not msecs)"
+msgstr ""
+
+#: shared-bindings/_bleio/CharacteristicBuffer.c
+msgid "timeout must be >= 0.0"
+msgstr ""
+
+#: shared-bindings/time/__init__.c
+msgid "timestamp out of range for platform time_t"
+msgstr ""
+
+#: shared-module/struct/__init__.c
+msgid "too many arguments provided with the given format"
+msgstr ""
+
+#: py/runtime.c
+#, c-format
+msgid "too many values to unpack (expected %d)"
+msgstr ""
+
+#: py/objstr.c
+msgid "tuple index out of range"
+msgstr ""
+
+#: py/obj.c
+msgid "tuple/list has wrong length"
+msgstr ""
+
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "tuple/list required on RHS"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+msgid "tx and rx cannot both be None"
+msgstr ""
+
+#: py/objtype.c
+msgid "type '%q' is not an acceptable base type"
+msgstr ""
+
+#: py/objtype.c
+msgid "type is not an acceptable base type"
+msgstr ""
+
+#: py/runtime.c
+msgid "type object '%q' has no attribute '%q'"
+msgstr ""
+
+#: py/objtype.c
+msgid "type takes 1 or 3 arguments"
+msgstr ""
+
+#: py/objint_longlong.c
+msgid "ulonglong too large"
+msgstr ""
+
+#: py/emitnative.c
+msgid "unary op %q not implemented"
+msgstr ""
+
+#: py/parse.c
+msgid "unexpected indent"
+msgstr ""
+
+#: py/bc.c
+msgid "unexpected keyword argument"
+msgstr ""
+
+#: py/bc.c py/objnamedtuple.c
+msgid "unexpected keyword argument '%q'"
+msgstr ""
+
+#: py/lexer.c
+msgid "unicode name escapes"
+msgstr ""
+
+#: py/parse.c
+msgid "unindent does not match any outer indentation level"
+msgstr ""
+
+#: py/objstr.c
+#, c-format
+msgid "unknown conversion specifier %c"
+msgstr ""
+
+#: py/objstr.c
+#, c-format
+msgid "unknown format code '%c' for object of type '%s'"
+msgstr ""
+
+#: py/objstr.c
+#, c-format
+msgid "unknown format code '%c' for object of type 'float'"
+msgstr ""
+
+#: py/objstr.c
+#, c-format
+msgid "unknown format code '%c' for object of type 'str'"
+msgstr ""
+
+#: py/compile.c
+msgid "unknown type"
+msgstr ""
+
+#: py/emitnative.c
+msgid "unknown type '%q'"
+msgstr ""
+
+#: py/objstr.c
+msgid "unmatched '{' in format"
+msgstr ""
+
+#: py/objtype.c py/runtime.c
+msgid "unreadable attribute"
+msgstr ""
+
+#: shared-bindings/displayio/TileGrid.c
+msgid "unsupported %q type"
+msgstr ""
+
+#: py/emitinlinethumb.c
+#, c-format
+msgid "unsupported Thumb instruction '%s' with %d arguments"
+msgstr ""
+
+#: py/emitinlinextensa.c
+#, c-format
+msgid "unsupported Xtensa instruction '%s' with %d arguments"
+msgstr ""
+
+#: py/objstr.c
+#, c-format
+msgid "unsupported format character '%c' (0x%x) at index %d"
+msgstr ""
+
+#: py/runtime.c
+msgid "unsupported type for %q: '%s'"
+msgstr ""
+
+#: py/runtime.c
+msgid "unsupported type for operator"
+msgstr ""
+
+#: py/runtime.c
+msgid "unsupported types for %q: '%s', '%s'"
+msgstr ""
+
+#: py/objint.c
+#, c-format
+msgid "value must fit in %d byte(s)"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c
+msgid "value_count must be > 0"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "window must be <= interval"
+msgstr ""
+
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "write_args must be a list, tuple, or None"
+msgstr ""
+
+#: py/objstr.c
+msgid "wrong number of arguments"
+msgstr ""
+
+#: py/runtime.c
+msgid "wrong number of values to unpack"
+msgstr ""
+
+#: shared-module/displayio/Shape.c
+msgid "x value out of bounds"
+msgstr ""
+
+#: shared-bindings/displayio/Shape.c
+msgid "y should be an int"
+msgstr ""
+
+#: shared-module/displayio/Shape.c
+msgid "y value out of bounds"
+msgstr ""
+
+#: py/objrange.c
+msgid "zero step"
+msgstr ""
+
+#~ msgid "Can't add services in Central mode"
+#~ msgstr "센트랄(중앙) 모드에서는 서비스를 추가 할 수 없습니다"
+
+#~ msgid "Can't advertise in Central mode"
+#~ msgstr "센트랄(중앙) 모드로 광고 (브로드 캐스트) 할 수 없습니다"
+
+#~ msgid "Can't change the name in Central mode"
+#~ msgstr "센트랄(중앙) 모드에서는 이름을 변경할 수 없습니다"
+
+#~ msgid "Data too large for the advertisement packet"
+#~ msgstr "광고 (브로드 캐스트) 패킷에 대한 데이터가 너무 큽니다"
+
+#~ msgid "Failed to add service"
+#~ msgstr "서비스를 추가하지 못했습니다"
+
+#~ msgid "Failed to add service, err 0x%04x"
+#~ msgstr "서비스를 추가하지 못했습니다., 오류 0x%04x"
+
+#~ msgid "Failed to connect:"
+#~ msgstr "연결할 수 없다"
+
+#~ msgid "Failed to continue scanning"
+#~ msgstr "스캔을 계속할 수 없습니다"
+
+#~ msgid "Failed to continue scanning, err 0x%04x"
+#~ msgstr "스캔을 계속할 수 없습니다, 오류 0x%04x"
diff --git a/locale/pl.po b/locale/pl.po
index 0edc5906e..34381c08d 100644
--- a/locale/pl.po
+++ b/locale/pl.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: 2019-03-19 18:37-0700\n"
 "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n"
 "Language-Team: pl\n"
@@ -1129,7 +1129,7 @@ msgstr "Uruchomiony tryb bezpieczeństwa! Samo-przeładowanie wyłączone.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Uruchomiony tryb bezpieczeństwa! Zapisany kod nie jest uruchamiany.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA lub SCL wymagają podciągnięcia"
 
@@ -2746,14 +2746,13 @@ msgstr "zerowy krok"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Nie udało się uzyskać blokady"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Nie udało się dodać charakterystyki, błąd 0x$04x"
 
 #~ msgid "Failed to add service"
 #~ msgstr "Nie udało się dodać serwisu"
 
-#, c-format
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Nie udało się dodać serwisu, błąd 0x%04x"
 
@@ -2766,7 +2765,6 @@ msgstr "zerowy krok"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Nie udała się kontynuacja skanowania"
 
-#, c-format
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Nie udała się kontynuacja skanowania, błąd 0x%04x"
 
@@ -2779,7 +2777,6 @@ msgstr "zerowy krok"
 #~ msgid "Failed to start advertising"
 #~ msgstr "Nie udało się rozpocząć rozgłaszania"
 
-#, c-format
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Nie udało się rozpocząć rozgłaszania, błąd 0x%04x"
 
@@ -2789,7 +2786,6 @@ msgstr "zerowy krok"
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Nie udało się zatrzymać rozgłaszania"
 
-#, c-format
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Nie udało się zatrzymać rozgłaszania, błąd 0x%04x"
 
@@ -2810,7 +2806,6 @@ msgstr "zerowy krok"
 #~ "bpp given"
 #~ msgstr "Wspierane są tylko pliki BMP czarno-białe, 8bpp i 16bpp: %d bpp "
 
-#, c-format
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index b5cd24405..01a9f0470 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: 2018-10-02 21:14-0000\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -1138,7 +1138,7 @@ msgstr "Rodando em modo seguro! Atualização automática está desligada.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Rodando em modo seguro! Não está executando o código salvo.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA ou SCL precisa de um pull up"
 
@@ -2754,7 +2754,7 @@ msgstr "passo zero"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Falha ao alocar buffer RX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
@@ -2762,7 +2762,7 @@ msgstr "passo zero"
 #~ msgid "Failed to add service"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
@@ -2770,7 +2770,7 @@ msgstr "passo zero"
 #~ msgid "Failed to change softdevice state"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Não é possível iniciar o anúncio. status: 0x%02x"
 
@@ -2794,7 +2794,7 @@ msgstr "passo zero"
 #~ msgid "Failed to start advertising"
 #~ msgstr "Não é possível iniciar o anúncio. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Não é possível iniciar o anúncio. status: 0x%02x"
 
@@ -2806,7 +2806,7 @@ msgstr "passo zero"
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po
index dfd7e8b0d..750cdd9d8 100644
--- a/locale/zh_Latn_pinyin.po
+++ b/locale/zh_Latn_pinyin.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2019-11-17 20:54-0600\n"
 "PO-Revision-Date: 2019-04-13 10:10-0700\n"
 "Last-Translator: hexthat\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@@ -1133,7 +1133,7 @@ msgstr "Zài ānquán móshì xià yùnxíng! Zìdòng chóngxīn jiāzài yǐ g
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Zài ānquán móshì xià yùnxíng! Bù yùnxíng yǐ bǎocún de dàimǎ.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA huò SCL xūyào lādòng"
 
@@ -2765,21 +2765,18 @@ msgstr "líng bù"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Wúfǎ huòdé mutex"
 
-#, c-format
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Tiānjiā tèxìng shībài, err 0x%04x"
 
 #~ msgid "Failed to add service"
 #~ msgstr "Tiānjiā fúwù shībài"
 
-#, c-format
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Tiānjiā fúwù shībài, err 0x%04x"
 
 #~ msgid "Failed to change softdevice state"
 #~ msgstr "Gēnggǎi ruǎn shèbèi zhuàngtài shībài"
 
-#, c-format
 #~ msgid "Failed to configure advertising, err 0x%04x"
 #~ msgstr "Wúfǎ pèizhì guǎnggào, cuòwù 0x%04x"
 
@@ -2789,7 +2786,6 @@ msgstr "líng bù"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Jìxù sǎomiáo shībài"
 
-#, c-format
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Jìxù sǎomiáo shībài, err 0x%04x"
 
@@ -2799,18 +2795,15 @@ msgstr "líng bù"
 #~ msgid "Failed to release mutex"
 #~ msgstr "Wúfǎ shìfàng mutex"
 
-#, c-format
 #~ msgid "Failed to set device name, err 0x%04x"
 #~ msgstr "Wúfǎ shèzhì shèbèi míngchēng, cuòwù 0x%04x"
 
 #~ msgid "Failed to start advertising"
 #~ msgstr "Qǐdòng guǎnggào shībài"
 
-#, c-format
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Qǐdòng guǎnggào shībài, err 0x%04x"
 
-#, c-format
 #~ msgid "Failed to start pairing, error 0x%04x"
 #~ msgstr "Wúfǎ kāishǐ pèiduì, cuòwù 0x%04x"
 
@@ -2820,7 +2813,6 @@ msgstr "líng bù"
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Wúfǎ tíngzhǐ guǎnggào"
 
-#, c-format
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Wúfǎ tíngzhǐ guǎnggào, err 0x%04x"
 
@@ -2854,7 +2846,6 @@ msgstr "líng bù"
 #~ msgstr ""
 #~ "Jǐn zhīchí dān sè, suǒyǐn 8bpp hé 16bpp huò gèng dà de BMP: %d bpp tígōng"
 
-#, c-format
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Ruǎn shèbèi wéihù, id: 0X%08lX, pc: 0X%08lX"