Add new translation messages

9 files changed, 412 insertions, 348 deletions

diff --git a/locale/ID.po b/locale/ID.po
index 76bb14893..405b3a0e3 100644
--- a/locale/ID.po
+++ b/locale/ID.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-11-09 16:20-0800\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -131,7 +131,7 @@ msgstr "kompresi header"
 msgid "invalid dupterm index"
 msgstr "indeks dupterm tidak valid"
 
-#: extmod/vfs_fat.c:426 py/moduerrno.c:150
+#: extmod/vfs_fat.c:426 py/moduerrno.c:154
 msgid "Read-only filesystem"
 msgstr "sistem file (filesystem) bersifat Read-only"
 
@@ -151,74 +151,42 @@ msgstr "argumen-argumen tidak valid"
 msgid "script compilation not supported"
 msgstr "kompilasi script tidak didukung"
 
-#: main.c:154
+#: main.c:150
 msgid " output:\n"
 msgstr "output:\n"
 
-#: main.c:168 main.c:241
+#: main.c:164 main.c:237
 msgid ""
 "Auto-reload is on. Simply save files over USB to run them or enter REPL to "
 "disable.\n"
-msgstr "Auto-reload aktif. Silahkan simpan data-data (files) melalui USB untuk menjalankannya atau masuk ke REPL untuk"
-"menonaktifkan.\n"
+msgstr ""
+"Auto-reload aktif. Silahkan simpan data-data (files) melalui USB untuk "
+"menjalankannya atau masuk ke REPL untukmenonaktifkan.\n"
 
-#: main.c:170
+#: main.c:166
 msgid "Running in safe mode! Auto-reload is off.\n"
 msgstr "Berjalan di mode aman(safe mode)! Auto-reload tidak aktif.\n"
 
-#: main.c:172 main.c:243
+#: main.c:168 main.c:239
 msgid "Auto-reload is off.\n"
 msgstr "Auto-reload tidak aktif.\n"
 
-#: main.c:186
+#: main.c:182
 msgid "Running in safe mode! Not running saved code.\n"
-msgstr "Berjalan di mode aman(safe mode)! tidak menjalankan kode yang tersimpan.\n"
+msgstr ""
+"Berjalan di mode aman(safe mode)! tidak menjalankan kode yang tersimpan.\n"
 
-#: main.c:202
+#: main.c:198
 msgid "WARNING: Your code filename has two extensions\n"
 msgstr "PERINGATAN: Nama file kode anda mempunyai dua ekstensi\n"
 
-#: main.c:250
-msgid "You requested starting safe mode by "
-msgstr "Anda mengajukan untuk memulai mode aman pada (safe mode) pada "
-
-#: main.c:253
-msgid "To exit, please reset the board without "
-msgstr "Untuk keluar, silahkan reset board tanpa "
-
-#: main.c:260
-msgid ""
-"You are running in safe mode which means something really bad happened.\n"
-msgstr "Anda sedang menjalankan mode aman (safe mode) yang berarti sesuatu yang sangat buruk telah terjadi.\n"
-
-#: main.c:262
-msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
-msgstr "Sepertinya inti kode CircuitPython kita crash dengan sangat keras. Ups!\n"
-
-#: main.c:263
-msgid "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-msgstr "Silahkan taruh masalah disini dengan isi dari CIRCUITPY drive: anda \n"
-
-#: main.c:266
-msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
-"provides\n"
-msgstr "Tegangan dari mikrokontroler turun atau mati. Pastikan sumber tegangan "
-"memberikan daya\n"
-
-#: main.c:267
-msgid ""
-"enough power for the whole circuit and press reset (after ejecting "
-"CIRCUITPY).\n"
-msgstr ""
-"tegangan cukup untuk semua sirkuit dan tekan reset (setelah mencabut "
-"CIRCUITPY).\n"
-
-#: main.c:271
+#: main.c:244
 msgid "Press any key to enter the REPL. Use CTRL-D to reload."
-msgstr "Tekan tombol apa saja untuk masuk ke dalam REPL. Gunakan CTRL+D untuk reset (Reload)"
+msgstr ""
+"Tekan tombol apa saja untuk masuk ke dalam REPL. Gunakan CTRL+D untuk reset "
+"(Reload)"
 
-#: main.c:429
+#: main.c:407
 msgid "soft reboot\n"
 msgstr "memulai ulang software(soft reboot)\n"
 
@@ -340,7 +308,9 @@ msgstr "Pin untuk channel kanan tidak valid"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c:154
 msgid "Cannot output both channels on the same pin"
-msgstr "Tidak dapat menggunakan output di kedua channel dengan menggunakan pin yang sama"
+msgstr ""
+"Tidak dapat menggunakan output di kedua channel dengan menggunakan pin yang "
+"sama"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c:243
 #: ports/atmel-samd/common-hal/pulseio/PWMOut.c:189
@@ -364,9 +334,9 @@ msgstr "Pin yang tersedia tidak cukup"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c:78
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
-#: ports/atmel-samd/common-hal/busio/UART.c:119
+#: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "Pin-pin tidak valid"
 
@@ -378,31 +348,31 @@ msgstr "SDA atau SCL membutuhkan pull up"
 msgid "Unsupported baudrate"
 msgstr "Baudrate tidak didukung"
 
-#: ports/atmel-samd/common-hal/busio/UART.c:66
+#: ports/atmel-samd/common-hal/busio/UART.c:67
 msgid "bytes > 8 bits not supported"
 msgstr "byte > 8 bit tidak didukung"
 
-#: ports/atmel-samd/common-hal/busio/UART.c:72
-#: ports/nrf/common-hal/busio/UART.c:82
+#: ports/atmel-samd/common-hal/busio/UART.c:73
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "tx dan rx keduanya tidak boleh kosong"
 
-#: ports/atmel-samd/common-hal/busio/UART.c:145
-#: ports/nrf/common-hal/busio/UART.c:115
+#: ports/atmel-samd/common-hal/busio/UART.c:146
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Gagal untuk mengalokasikan buffer RX"
 
-#: ports/atmel-samd/common-hal/busio/UART.c:153
+#: ports/atmel-samd/common-hal/busio/UART.c:154
 msgid "Could not initialize UART"
 msgstr "Tidak dapat menginisialisasi UART"
 
-#: ports/atmel-samd/common-hal/busio/UART.c:240
-#: ports/nrf/common-hal/busio/UART.c:149
+#: ports/atmel-samd/common-hal/busio/UART.c:241
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Tidak pin RX"
 
-#: ports/atmel-samd/common-hal/busio/UART.c:294
-#: ports/nrf/common-hal/busio/UART.c:195
+#: ports/atmel-samd/common-hal/busio/UART.c:300
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Tidak ada pin TX"
 
@@ -414,7 +384,9 @@ msgstr "Tidak bisa mendapatkan pull pada saat mode output"
 #: ports/atmel-samd/common-hal/microcontroller/__init__.c:74
 #: ports/esp8266/common-hal/microcontroller/__init__.c:64
 msgid "Cannot reset into bootloader because no bootloader is present."
-msgstr "Tidak dapat melakukan reset ke bootloader karena tidak ada bootloader yang terisi"
+msgstr ""
+"Tidak dapat melakukan reset ke bootloader karena tidak ada bootloader yang "
+"terisi"
 
 #: ports/atmel-samd/common-hal/pulseio/PWMOut.c:120
 #: ports/atmel-samd/common-hal/pulseio/PWMOut.c:369
@@ -447,7 +419,7 @@ msgid "pop from an empty PulseIn"
 msgstr "Muncul dari PulseIn yang kosong"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c:237
-#: ports/esp8266/common-hal/pulseio/PulseIn.c:182 py/obj.c:420
+#: ports/esp8266/common-hal/pulseio/PulseIn.c:182 py/obj.c:422
 msgid "index out of range"
 msgstr "index keluar dari jangkauan"
 
@@ -538,7 +510,9 @@ msgstr "Tidak dapat memasang filesystem kembali"
 
 #: ports/esp8266/common-hal/storage/__init__.c:38
 msgid "Use esptool to erase flash and re-upload Python instead"
-msgstr "Gunakan esptool untuk menghapus flash dan upload ulang Python sebagai gantinya"
+msgstr ""
+"Gunakan esptool untuk menghapus flash dan upload ulang Python sebagai "
+"gantinya"
 
 #: ports/esp8266/esp_mphal.c:154
 msgid "C-level assert"
@@ -742,8 +716,8 @@ msgid "Can not fit data into the advertisment packet"
 msgstr "Tidak bisa menyesuaikan data ke dalam paket advertisment"
 
 #: ports/nrf/common-hal/bleio/Device.c:266
-#, c-format
-msgid "Failed to discover services, status: 0x%08lX"
+#, fuzzy, c-format
+msgid "Failed to discover serivices, status: 0x%08lX"
 msgstr "Gagal untuk menemukan layanan, status: 0x%08lX"
 
 #: ports/nrf/common-hal/bleio/Device.c:403
@@ -803,7 +777,7 @@ msgstr "Panjang string UUID tidak valid"
 msgid "Invalid UUID parameter"
 msgstr "Parameter UUID tidak valid"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr "Semua perangkat I2C sedang digunakan"
 
@@ -811,24 +785,24 @@ msgstr "Semua perangkat I2C sedang digunakan"
 msgid "All SPI peripherals are in use"
 msgstr "Semua perangkat SPI sedang digunakan"
 
-#: ports/nrf/common-hal/busio/UART.c:48
+#: ports/nrf/common-hal/busio/UART.c:49
 #, c-format
 msgid "error = 0x%08lX"
 msgstr "error = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:86
+#: ports/nrf/common-hal/busio/UART.c:122
 msgid "Invalid buffer size"
 msgstr "Ukuran buffer tidak valid"
 
-#: ports/nrf/common-hal/busio/UART.c:90
+#: ports/nrf/common-hal/busio/UART.c:126
 msgid "Odd parity is not supported"
 msgstr "Parity ganjil tidak didukung"
 
-#: ports/nrf/common-hal/busio/UART.c:322 ports/nrf/common-hal/busio/UART.c:326
-#: ports/nrf/common-hal/busio/UART.c:331 ports/nrf/common-hal/busio/UART.c:336
-#: ports/nrf/common-hal/busio/UART.c:342 ports/nrf/common-hal/busio/UART.c:347
-#: ports/nrf/common-hal/busio/UART.c:352 ports/nrf/common-hal/busio/UART.c:356
-#: ports/nrf/common-hal/busio/UART.c:364
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr "busio.UART tidak tersedia"
 
@@ -957,7 +931,8 @@ msgid ""
 msgstr ""
 "Selamat datang ke Adafruit CircuitPython %s!\n"
 "\n"
-"Silahkan kunjungi learn.adafruit.com/category/circuitpython untuk panduan project.\n"
+"Silahkan kunjungi learn.adafruit.com/category/circuitpython untuk panduan "
+"project.\n"
 "\n"
 "Untuk menampilkan modul built-in silahkan ketik `help(\"modules\")`.\n"
 
@@ -1334,140 +1309,140 @@ msgstr ""
 msgid "expecting a dict for keyword args"
 msgstr ""
 
-#: py/moduerrno.c:143 py/moduerrno.c:146
+#: py/moduerrno.c:147 py/moduerrno.c:150
 msgid "Permission denied"
 msgstr ""
 
-#: py/moduerrno.c:144
+#: py/moduerrno.c:148
 msgid "No such file/directory"
 msgstr ""
 
-#: py/moduerrno.c:145
+#: py/moduerrno.c:149
 msgid "Input/output error"
 msgstr ""
 
-#: py/moduerrno.c:147
+#: py/moduerrno.c:151
 msgid "File exists"
 msgstr ""
 
-#: py/moduerrno.c:148
+#: py/moduerrno.c:152
 msgid "Unsupported operation"
 msgstr ""
 
-#: py/moduerrno.c:149
+#: py/moduerrno.c:153
 msgid "Invalid argument"
 msgstr ""
 
-#: py/obj.c:90
+#: py/obj.c:92
 msgid "Traceback (most recent call last):\n"
 msgstr ""
 
-#: py/obj.c:94
+#: py/obj.c:96
 msgid "  File \"%q\", line %d"
 msgstr ""
 
-#: py/obj.c:96
+#: py/obj.c:98
 msgid "  File \"%q\""
 msgstr ""
 
-#: py/obj.c:100
+#: py/obj.c:102
 msgid ", in %q\n"
 msgstr ""
 
-#: py/obj.c:257
+#: py/obj.c:259
 msgid "can't convert to int"
 msgstr ""
 
-#: py/obj.c:260
+#: py/obj.c:262
 #, c-format
 msgid "can't convert %s to int"
 msgstr ""
 
-#: py/obj.c:320
+#: py/obj.c:322
 msgid "can't convert to float"
 msgstr ""
 
-#: py/obj.c:323
+#: py/obj.c:325
 #, c-format
 msgid "can't convert %s to float"
 msgstr ""
 
-#: py/obj.c:353
+#: py/obj.c:355
 msgid "can't convert to complex"
 msgstr ""
 
-#: py/obj.c:356
+#: py/obj.c:358
 #, c-format
 msgid "can't convert %s to complex"
 msgstr ""
 
-#: py/obj.c:371
+#: py/obj.c:373
 msgid "expected tuple/list"
 msgstr ""
 
-#: py/obj.c:374
+#: py/obj.c:376
 #, c-format
 msgid "object '%s' is not a tuple or list"
 msgstr ""
 
-#: py/obj.c:385
+#: py/obj.c:387
 msgid "tuple/list has wrong length"
 msgstr ""
 
-#: py/obj.c:387
+#: py/obj.c:389
 #, c-format
 msgid "requested length %d but object has length %d"
 msgstr ""
 
-#: py/obj.c:400
+#: py/obj.c:402
 msgid "indices must be integers"
 msgstr ""
 
-#: py/obj.c:403
+#: py/obj.c:405
 msgid "%q indices must be integers, not %s"
 msgstr ""
 
-#: py/obj.c:423
+#: py/obj.c:425
 msgid "%q index out of range"
 msgstr ""
 
-#: py/obj.c:455
+#: py/obj.c:457
 msgid "object has no len"
 msgstr ""
 
-#: py/obj.c:458
+#: py/obj.c:460
 #, c-format
 msgid "object of type '%s' has no len()"
 msgstr ""
 
-#: py/obj.c:496
+#: py/obj.c:500
 msgid "object does not support item deletion"
 msgstr ""
 
-#: py/obj.c:499
+#: py/obj.c:503
 #, c-format
 msgid "'%s' object does not support item deletion"
 msgstr ""
 
-#: py/obj.c:503
+#: py/obj.c:507
 msgid "object is not subscriptable"
 msgstr ""
 
-#: py/obj.c:506
+#: py/obj.c:510
 #, c-format
 msgid "'%s' object is not subscriptable"
 msgstr ""
 
-#: py/obj.c:510
+#: py/obj.c:514
 msgid "object does not support item assignment"
 msgstr ""
 
-#: py/obj.c:513
+#: py/obj.c:517
 #, c-format
 msgid "'%s' object does not support item assignment"
 msgstr ""
 
-#: py/obj.c:544
+#: py/obj.c:548
 msgid "object with buffer protocol required"
 msgstr ""
 
@@ -1983,6 +1958,14 @@ msgstr ""
 msgid "stream operation not supported"
 msgstr ""
 
+#: py/stream.c:254
+msgid "string not supported; use bytes or bytearray"
+msgstr ""
+
+#: py/stream.c:289
+msgid "length argument not allowed for this type"
+msgstr ""
+
 #: py/vm.c:255
 msgid "local variable referenced before assignment"
 msgstr ""
@@ -2141,14 +2124,18 @@ msgstr ""
 msgid "Function requires lock."
 msgstr ""
 
-#: shared-bindings/busio/UART.c:102
+#: shared-bindings/busio/UART.c:106
 msgid "bits must be 7, 8 or 9"
 msgstr ""
 
-#: shared-bindings/busio/UART.c:114
+#: shared-bindings/busio/UART.c:118
 msgid "stop must be 1 or 2"
 msgstr ""
 
+#: shared-bindings/busio/UART.c:123
+msgid "timeout >100 (units are now seconds, not msecs)"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c:211
 msgid "Invalid direction."
 msgstr ""
@@ -2370,15 +2357,15 @@ msgstr ""
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
-#: shared-bindings/time/__init__.c:169 shared-bindings/time/__init__.c:264
+#: shared-bindings/time/__init__.c:169 shared-bindings/time/__init__.c:263
 msgid "Tuple or struct_time argument required"
 msgstr ""
 
-#: shared-bindings/time/__init__.c:174 shared-bindings/time/__init__.c:269
+#: shared-bindings/time/__init__.c:174 shared-bindings/time/__init__.c:268
 msgid "function takes exactly 9 arguments"
 msgstr ""
 
-#: shared-bindings/time/__init__.c:240 shared-bindings/time/__init__.c:273
+#: shared-bindings/time/__init__.c:239 shared-bindings/time/__init__.c:272
 msgid "timestamp out of range for platform time_t"
 msgstr ""
 
@@ -2521,3 +2508,80 @@ msgstr ""
 #: shared-module/usb_hid/Device.c:59
 msgid "USB Error"
 msgstr ""
+
+#: supervisor/shared/safe_mode.c:97
+msgid "You requested starting safe mode by "
+msgstr "Anda mengajukan untuk memulai mode aman pada (safe mode) pada "
+
+#: supervisor/shared/safe_mode.c:100
+msgid "To exit, please reset the board without "
+msgstr "Untuk keluar, silahkan reset board tanpa "
+
+#: supervisor/shared/safe_mode.c:107
+#, fuzzy
+msgid ""
+"You are running in safe mode which means something unanticipated happened.\n"
+msgstr ""
+"Anda sedang menjalankan mode aman (safe mode) yang berarti sesuatu yang "
+"sangat buruk telah terjadi.\n"
+
+#: supervisor/shared/safe_mode.c:109
+msgid ""
+"Looks like our core CircuitPython code crashed hard. Whoops!\n"
+"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
+" with the contents of your CIRCUITPY drive and this message:\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c:111
+msgid "Crash into the HardFault_Handler.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c:113
+msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c:115
+msgid "MicroPython fatal error.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c:118
+#, fuzzy
+msgid ""
+"The microcontroller's power dipped. Please make sure your power supply "
+"provides\n"
+"enough power for the whole circuit and press reset (after ejecting "
+"CIRCUITPY).\n"
+msgstr ""
+"Tegangan dari mikrokontroler turun atau mati. Pastikan sumber tegangan "
+"memberikan daya\n"
+
+#: supervisor/shared/safe_mode.c:120
+msgid ""
+"The CircuitPython heap was corrupted because the stack was too small.\n"
+"Please increase stack size limits and press reset (after ejecting "
+"CIRCUITPY).\n"
+"If you didn't change the stack, then file an issue here with the contents of "
+"your CIRCUITPY drive:\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c:123
+msgid ""
+"The reset button was pressed while booting CircuitPython. Press again to "
+"exit safe mode.\n"
+msgstr ""
+
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr ""
+#~ "Sepertinya inti kode CircuitPython kita crash dengan sangat keras. Ups!\n"
+
+#~ msgid ""
+#~ "enough power for the whole circuit and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ msgstr ""
+#~ "tegangan cukup untuk semua sirkuit dan tekan reset (setelah mencabut "
+#~ "CIRCUITPY).\n"
+
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Silahkan taruh masalah disini dengan isi dari CIRCUITPY drive: anda \n"
diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 92e181302..dd7df915f 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -329,7 +329,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr ""
 
@@ -346,12 +346,12 @@ msgid "bytes > 8 bits not supported"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr ""
 
@@ -360,12 +360,12 @@ msgid "Could not initialize UART"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr ""
 
@@ -766,7 +766,7 @@ msgstr ""
 msgid "Invalid UUID parameter"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr ""
 
@@ -779,19 +779,19 @@ msgstr ""
 msgid "error = 0x%08lX"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 msgid "Invalid buffer size"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 msgid "Odd parity is not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr ""
 
diff --git a/locale/de_DE.po b/locale/de_DE.po
index e9f81e0b1..8792ce834 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: Sebastian Plamauer\n"
 "Language-Team: \n"
@@ -333,7 +333,7 @@ msgstr "Nicht genug Pins vorhanden"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "Ungültige Pins"
 
@@ -350,12 +350,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "bytes mit merh als 8 bits werden nicht unterstützt"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "tx und rx können nicht beide None sein"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Konnte keinen RX Buffer allozieren"
 
@@ -364,12 +364,12 @@ msgid "Could not initialize UART"
 msgstr "Konnte UART nicht initialisieren"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Kein RX Pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Kein TX Pin"
 
@@ -774,7 +774,7 @@ msgstr "Ungültige UUID-Stringlänge"
 msgid "Invalid UUID parameter"
 msgstr "Ungültiger UUID-Parameter"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 #, fuzzy
 msgid "All I2C peripherals are in use"
 msgstr "Alle timer werden benutzt"
@@ -789,21 +789,21 @@ msgstr "Alle timer werden benutzt"
 msgid "error = 0x%08lX"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "ungültiger dupterm index"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "bytes mit merh als 8 bits werden nicht unterstützt"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr ""
 
@@ -2577,15 +2577,26 @@ msgstr ""
 #~ msgid "Can not apply advertisement data. status: 0x%02x"
 #~ msgstr "Kann advertisement data nicht anwenden. Status: 0x%02x"
 
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Kann GAP Parameter nicht anwenden."
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Bitte erstelle ein issue hier mit dem Inhalt deines CIRCUITPY-speichers:\n"
 
-#~ msgid "Can not apply device name in the stack."
-#~ msgstr "Der Gerätename kann nicht im Stack verwendet werden."
+#~ msgid "Can not encode UUID, to check length."
+#~ msgstr "Kann UUID nicht kodieren, um die Länge zu überprüfen."
+
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Kann das Merkmal nicht hinzufügen."
+
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr "CircuitPython ist abgestürzt. Ups!\n"
 
 #~ msgid "Cannot set PPCP parameters."
 #~ msgstr "Kann PPCP Parameter nicht setzen."
 
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "Kann GAP Parameter nicht anwenden."
+
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
@@ -2593,25 +2604,14 @@ msgstr ""
 #~ "genug Strom für den ganzen Schaltkreis liefert und drücke reset (nach dem "
 #~ "sicheren Auswerfen von CIRCUITPY.)\n"
 
-#~ msgid "Can not query for the device address."
-#~ msgstr "Kann nicht nach der Geräteadresse suchen."
-
-#~ msgid "Can not add Characteristic."
-#~ msgstr "Kann das Merkmal nicht hinzufügen."
-
-#~ msgid "Can not encode UUID, to check length."
-#~ msgstr "Kann UUID nicht kodieren, um die Länge zu überprüfen."
-
 #~ msgid "Can encode UUID into the advertisement packet."
 #~ msgstr "Kann UUID in das advertisement packet kodieren."
 
+#~ msgid "Can not query for the device address."
+#~ msgstr "Kann nicht nach der Geräteadresse suchen."
+
 #~ msgid "Can not add Service."
 #~ msgstr "Kann den Dienst nicht hinzufügen."
 
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-#~ msgstr ""
-#~ "Bitte erstelle ein issue hier mit dem Inhalt deines CIRCUITPY-speichers:\n"
-
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
-#~ msgstr "CircuitPython ist abgestürzt. Ups!\n"
+#~ msgid "Can not apply device name in the stack."
+#~ msgstr "Der Gerätename kann nicht im Stack verwendet werden."
diff --git a/locale/en_US.po b/locale/en_US.po
index 119dde3d6..1b3707917 100644
--- a/locale/en_US.po
+++ b/locale/en_US.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -329,7 +329,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr ""
 
@@ -346,12 +346,12 @@ msgid "bytes > 8 bits not supported"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr ""
 
@@ -360,12 +360,12 @@ msgid "Could not initialize UART"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr ""
 
@@ -766,7 +766,7 @@ msgstr ""
 msgid "Invalid UUID parameter"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr ""
 
@@ -779,19 +779,19 @@ msgstr ""
 msgid "error = 0x%08lX"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 msgid "Invalid buffer size"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 msgid "Odd parity is not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr ""
 
diff --git a/locale/es.po b/locale/es.po
index 29c69d49c..397056797 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-08-24 22:56-0500\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -335,7 +335,7 @@ msgstr "No hay suficientes pines disponibles"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "pines inválidos"
 
@@ -352,12 +352,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "bytes > 8 bits no soportados"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "Ambos tx y rx no pueden ser None"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Ha fallado la asignación del buffer RX"
 
@@ -366,12 +366,12 @@ msgid "Could not initialize UART"
 msgstr "No se puede inicializar la UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Sin pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Sin pin TX"
 
@@ -774,7 +774,7 @@ msgstr "Longitud de string UUID inválida"
 msgid "Invalid UUID parameter"
 msgstr "Parámetro UUID inválido"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr "Todos los timers están siendo usados"
 
@@ -787,19 +787,19 @@ msgstr "Todos los timers están siendo usados"
 msgid "error = 0x%08lX"
 msgstr "error = 0x%08lx"
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 msgid "Invalid buffer size"
 msgstr "Tamaño de buffer inválido"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 msgid "Odd parity is not supported"
 msgstr "Paridad impar no soportada"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr "busio.UART no disponible"
 
@@ -2585,18 +2585,35 @@ msgid ""
 "exit safe mode.\n"
 msgstr ""
 
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "No se pueden aplicar los parámetros GAP."
-
 #~ msgid "Can not add Characteristic."
 #~ msgstr "No se puede agregar la Característica."
 
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "No se pueden aplicar los parámetros GAP."
+
 #~ msgid "Can not apply device name in the stack."
 #~ msgstr "No se puede aplicar el nombre del dispositivo en el stack."
 
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr ""
+#~ "Parece que nuestro código CircuitPython dejó de funcionar. Whoops!\n"
+
+#~ msgid "Baud rate too high for this SPI peripheral"
+#~ msgstr "Baud rate demasiado alto para este periférico SPI"
+
 #~ msgid "Can not encode UUID, to check length."
 #~ msgstr "No se puede codificar el UUID, para revisar la longitud."
 
+#~ msgid "Can not query for the device address."
+#~ msgstr "No se puede consultar la dirección del dispositivo."
+
+#, fuzzy
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Por favor registra un issue en la siguiente URL con el contenidos de tu "
+#~ "unidad de almacenamiento CIRCUITPY:\n"
+
 #~ msgid "Can encode UUID into the advertisement packet."
 #~ msgstr "Se puede codificar el UUID en el paquete de anuncio."
 
@@ -2606,12 +2623,6 @@ msgstr ""
 #~ msgid "Can not add Service."
 #~ msgstr "No se puede agregar el Servicio."
 
-#~ msgid "Can not query for the device address."
-#~ msgstr "No se puede consultar la dirección del dispositivo."
-
-#~ msgid "Baud rate too high for this SPI peripheral"
-#~ msgstr "Baud rate demasiado alto para este periférico SPI"
-
 #~ msgid "Can not apply advertisement data. status: 0x%02x"
 #~ msgstr "No se puede aplicar los datos de anuncio. status: 0x%02x"
 
@@ -2624,14 +2635,3 @@ msgstr ""
 #~ msgstr ""
 #~ "suficiente poder para todo el circuito y presiona reset (después de "
 #~ "expulsar CIRCUITPY).\n"
-
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
-#~ msgstr ""
-#~ "Parece que nuestro código CircuitPython dejó de funcionar. Whoops!\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-#~ msgstr ""
-#~ "Por favor registra un issue en la siguiente URL con el contenidos de tu "
-#~ "unidad de almacenamiento CIRCUITPY:\n"
diff --git a/locale/fil.po b/locale/fil.po
index 53ca5d22a..0755ad8a7 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -333,7 +333,7 @@ msgstr "Hindi sapat ang magagamit na pins"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "Mali ang pins"
 
@@ -350,12 +350,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "hindi sinusuportahan ang bytes > 8 bits"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "tx at rx hindi pwedeng parehas na None"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Nabigong ilaan ang RX buffer"
 
@@ -364,12 +364,12 @@ msgid "Could not initialize UART"
 msgstr "Hindi ma-initialize ang UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Walang RX pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Walang TX pin"
 
@@ -773,7 +773,7 @@ msgstr "Mali ang UUID string length"
 msgid "Invalid UUID parameter"
 msgstr "Mali ang UUID parameter"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr "Lahat ng I2C peripherals ginagamit"
 
@@ -786,19 +786,19 @@ msgstr "Lahat ng SPI peripherals ay ginagamit"
 msgid "error = 0x%08lX"
 msgstr "error = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 msgid "Invalid buffer size"
 msgstr "Mali ang buffer size"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 msgid "Odd parity is not supported"
 msgstr "Odd na parity ay hindi supportado"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr "busio.UART hindi available"
 
@@ -2600,18 +2600,35 @@ msgstr ""
 "Ang reset button ay pinindot habang nag boot ang CircuitPython. Pindutin "
 "ulit para lumabas sa safe mode.\n"
 
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Hindi ma-apply ang GAP parameters."
-
 #~ msgid "Can not add Characteristic."
 #~ msgstr "Hindi mabasa and Characteristic."
 
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "Hindi ma-apply ang GAP parameters."
+
 #~ msgid "Can not apply device name in the stack."
 #~ msgstr "Hindi maaaring ma-aplay ang device name sa stack."
 
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr ""
+#~ "Mukhang ang core CircuitPython code ay nag-crash ng malakas. Aray!\n"
+
+#, fuzzy
+#~ msgid "palette must be displayio.Palette"
+#~ msgstr "ang palette ay dapat 32 bytes ang haba"
+
 #~ msgid "Can not encode UUID, to check length."
 #~ msgstr "Hindi ma-encode UUID, para suriin ang haba."
 
+#~ msgid "Can not query for the device address."
+#~ msgstr "Hindi maaaring mag-query para sa address ng device."
+
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Mag-file ng isang isyu dito gamit ang mga nilalaman ng iyong CIRCUITPY "
+#~ "drive:\n"
+
 #~ msgid "Can encode UUID into the advertisement packet."
 #~ msgstr "Maaring i-encode ang UUID sa advertisement packet."
 
@@ -2621,13 +2638,6 @@ msgstr ""
 #~ msgid "Can not add Service."
 #~ msgstr "Hindi maidaragdag ang serbisyo."
 
-#~ msgid "Can not query for the device address."
-#~ msgstr "Hindi maaaring mag-query para sa address ng device."
-
-#, fuzzy
-#~ msgid "palette must be displayio.Palette"
-#~ msgstr "ang palette ay dapat 32 bytes ang haba"
-
 #~ msgid "Can not apply advertisement data. status: 0x%02x"
 #~ msgstr "Hindi ma i-apply ang advertisement data. status: 0x%02x"
 
@@ -2640,13 +2650,3 @@ msgstr ""
 #~ msgstr ""
 #~ "ay nagbibigay ng sapat na power para sa buong circuit at i-press ang "
 #~ "reset (pagkatapos i-eject ang CIRCUITPY).\n"
-
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
-#~ msgstr ""
-#~ "Mukhang ang core CircuitPython code ay nag-crash ng malakas. Aray!\n"
-
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-#~ msgstr ""
-#~ "Mag-file ng isang isyu dito gamit ang mga nilalaman ng iyong CIRCUITPY "
-#~ "drive:\n"
diff --git a/locale/fr.po b/locale/fr.po
index 61781fe5b..6c41ffaea 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-12-23 20:05+0100\n"
 "Last-Translator: Pierrick Couturier <arofarn@arofarn.info>\n"
 "Language-Team: fr\n"
@@ -330,7 +330,7 @@ msgstr "Pas assez de broches disponibles"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "Broches invalides"
 
@@ -347,12 +347,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "octets > 8 bits non supporté"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "tx et rx ne peuvent être None tous les deux"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Echec de l'allocation du tampon RX"
 
@@ -361,12 +361,12 @@ msgid "Could not initialize UART"
 msgstr "L'UART n'a pu être initialisé"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Pas de broche RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Pas de broche TX"
 
@@ -771,7 +771,7 @@ msgstr "Longeur de chaîne UUID invalide"
 msgid "Invalid UUID parameter"
 msgstr "Paramètre UUID invalide"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 #, fuzzy
 msgid "All I2C peripherals are in use"
 msgstr "Tous les périphériques I2C sont utilisés"
@@ -786,21 +786,21 @@ msgstr "Tous les périphériques SPI sont utilisés"
 msgid "error = 0x%08lX"
 msgstr "erreur = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "longueur de tampon invalide"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "parité impaire non supportée"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 #, fuzzy
 msgid "busio.UART not available"
 msgstr "busio.UART n'est pas disponible"
@@ -2641,20 +2641,12 @@ msgstr ""
 #~ msgstr ""
 #~ "SVP, remontez le problème là avec le contenu du lecteur CIRCUITPY:\n"
 
-#~ msgid "Can not add Service."
-#~ msgstr "Impossible d'ajouter le Service"
-
-#~ msgid "Invalid Service type"
-#~ msgstr "Type de service invalide"
-
-#~ msgid "Can not encode UUID, to check length."
-#~ msgstr "Impossible d'encoder l'UUID pour vérifier la longueur."
-
-#~ msgid "Can not add Characteristic."
-#~ msgstr "Impossible d'ajouter la Characteristic."
+#, fuzzy
+#~ msgid "value_size must be power of two"
+#~ msgstr "value_size doit être une puissance de 2"
 
-#~ msgid "Can not query for the device address."
-#~ msgstr "Impossible d'obtenir l'adresse du périphérique"
+#~ msgid "Cannot set PPCP parameters."
+#~ msgstr "Impossible d'appliquer les paramètres PPCP"
 
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
@@ -2663,19 +2655,27 @@ msgstr ""
 #~ "assez de puissance pour l'ensemble du circuit et appuyez sur "
 #~ "'reset' (après avoir éjecter CIRCUITPY).\n"
 
-#~ msgid "Cannot set PPCP parameters."
-#~ msgstr "Impossible d'appliquer les paramètres PPCP"
+#, fuzzy
+#~ msgid "palette must be displayio.Palette"
+#~ msgstr "la palette doit être une displayio.Palette"
+
+#~ msgid "Can not encode UUID, to check length."
+#~ msgstr "Impossible d'encoder l'UUID pour vérifier la longueur."
+
+#~ msgid "Can not add Service."
+#~ msgstr "Impossible d'ajouter le Service"
+
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Impossible d'ajouter la Characteristic."
 
 #~ msgid "Can not apply device name in the stack."
 #~ msgstr "Impossible d'appliquer le nom de périphérique dans la pile"
 
+#~ msgid "Can not query for the device address."
+#~ msgstr "Impossible d'obtenir l'adresse du périphérique"
+
 #~ msgid "Cannot apply GAP parameters."
 #~ msgstr "Impossible d'appliquer les paramètres GAP"
 
-#, fuzzy
-#~ msgid "value_size must be power of two"
-#~ msgstr "value_size doit être une puissance de 2"
-
-#, fuzzy
-#~ msgid "palette must be displayio.Palette"
-#~ msgstr "la palette doit être une displayio.Palette"
+#~ msgid "Invalid Service type"
+#~ msgstr "Type de service invalide"
diff --git a/locale/it_IT.po b/locale/it_IT.po
index 4cb328319..3003d8c91 100644
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -334,7 +334,7 @@ msgstr "Non sono presenti abbastanza pin"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "Pin non validi"
 
@@ -351,12 +351,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "byte > 8 bit non supportati"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "tx e rx non possono essere entrambi None"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Impossibile allocare buffer RX"
 
@@ -365,12 +365,12 @@ msgid "Could not initialize UART"
 msgstr "Impossibile inizializzare l'UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Nessun pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Nessun pin TX"
 
@@ -774,7 +774,7 @@ msgstr "Lunghezza della stringa UUID non valida"
 msgid "Invalid UUID parameter"
 msgstr "Parametro UUID non valido"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr "Tutte le periferiche I2C sono in uso"
 
@@ -787,21 +787,21 @@ msgstr "Tutte le periferiche SPI sono in uso"
 msgid "error = 0x%08lX"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "lunghezza del buffer non valida"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "operazione I2C non supportata"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 #, fuzzy
 msgid "busio.UART not available"
 msgstr "busio.UART non ancora implementato"
@@ -2607,15 +2607,29 @@ msgstr ""
 #~ msgid "Can not apply advertisement data. status: 0x%02x"
 #~ msgstr "Impossible inserire dati advertisement. status: 0x%02x"
 
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Impossibile applicare i parametri GAP."
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Ti preghiamo di compilare una issue con il contenuto del tuo drie "
+#~ "CIRCUITPY:\n"
 
-#~ msgid "Can not apply device name in the stack."
-#~ msgstr "Non è possibile inserire il nome del dipositivo nella lista."
+#~ msgid "Can not encode UUID, to check length."
+#~ msgstr "Non è possibile codificare l'UUID, lunghezza da controllare."
+
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Non è possibile aggiungere Characteristic."
+
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr ""
+#~ "Sembra che il codice del core di CircuitPython sia crashato malamente. "
+#~ "Whoops!\n"
 
 #~ msgid "Cannot set PPCP parameters."
 #~ msgstr "Impossibile impostare i parametri PPCP."
 
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "Impossibile applicare i parametri GAP."
+
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
@@ -2623,28 +2637,14 @@ msgstr ""
 #~ "abbastanza potenza per l'intero circuito e premere reset (dopo aver "
 #~ "espulso CIRCUITPY).\n"
 
-#~ msgid "Can not query for the device address."
-#~ msgstr "Non è possibile trovare l'indirizzo del dispositivo."
-
-#~ msgid "Can not add Characteristic."
-#~ msgstr "Non è possibile aggiungere Characteristic."
-
-#~ msgid "Can not encode UUID, to check length."
-#~ msgstr "Non è possibile codificare l'UUID, lunghezza da controllare."
-
 #~ msgid "Can encode UUID into the advertisement packet."
 #~ msgstr "È possibile codificare l'UUID nel pacchetto di advertisement."
 
+#~ msgid "Can not query for the device address."
+#~ msgstr "Non è possibile trovare l'indirizzo del dispositivo."
+
 #~ msgid "Can not add Service."
 #~ msgstr "Non è possibile aggiungere Service."
 
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-#~ msgstr ""
-#~ "Ti preghiamo di compilare una issue con il contenuto del tuo drie "
-#~ "CIRCUITPY:\n"
-
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
-#~ msgstr ""
-#~ "Sembra che il codice del core di CircuitPython sia crashato malamente. "
-#~ "Whoops!\n"
+#~ msgid "Can not apply device name in the stack."
+#~ msgstr "Non è possibile inserire il nome del dipositivo nella lista."
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index 1b35b4824..56810874a 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-10-02 21:14-0000\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -329,7 +329,7 @@ msgstr "Não há pinos suficientes disponíveis"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "Pinos inválidos"
 
@@ -346,12 +346,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "bytes > 8 bits não suportado"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "TX e RX não podem ser ambos"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Falha ao alocar buffer RX"
 
@@ -360,12 +360,12 @@ msgid "Could not initialize UART"
 msgstr "Não foi possível inicializar o UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Nenhum pino RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Nenhum pino TX"
 
@@ -767,7 +767,7 @@ msgstr ""
 msgid "Invalid UUID parameter"
 msgstr "Parâmetro UUID inválido"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr "Todos os periféricos I2C estão em uso"
 
@@ -780,21 +780,21 @@ msgstr "Todos os periféricos SPI estão em uso"
 msgid "error = 0x%08lX"
 msgstr "erro = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "Arquivo inválido"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "I2C operação não suportada"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr "busio.UART não disponível"
 
@@ -2557,32 +2557,32 @@ msgid ""
 "exit safe mode.\n"
 msgstr ""
 
+#~ msgid "Can not add Service."
+#~ msgstr "Não é possível adicionar o serviço."
+
+#~ msgid "Can not apply advertisement data. status: 0x%02x"
+#~ msgstr "Não é possível aplicar dados de anúncio. status: 0x%02x"
+
 #~ msgid "Can not apply device name in the stack."
 #~ msgstr "Não é possível aplicar o nome do dispositivo na pilha."
 
-#~ msgid "Can not add Characteristic."
-#~ msgstr "Não é possível adicionar Característica."
+#~ msgid "Baud rate too high for this SPI peripheral"
+#~ msgstr "Taxa de transmissão muito alta para esse periférico SPI"
 
-#~ msgid "Can encode UUID into the advertisement packet."
-#~ msgstr "Pode codificar o UUID no pacote de anúncios."
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "Não é possível aplicar parâmetros GAP."
 
 #~ msgid "Invalid Service type"
 #~ msgstr "Tipo de serviço inválido"
 
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Não é possível aplicar parâmetros GAP."
-
-#~ msgid "Cannot set PPCP parameters."
-#~ msgstr "Não é possível definir parâmetros PPCP."
+#~ msgid "Can encode UUID into the advertisement packet."
+#~ msgstr "Pode codificar o UUID no pacote de anúncios."
 
 #~ msgid "Can not query for the device address."
 #~ msgstr "Não é possível consultar o endereço do dispositivo."
 
-#~ msgid "Baud rate too high for this SPI peripheral"
-#~ msgstr "Taxa de transmissão muito alta para esse periférico SPI"
-
-#~ msgid "Can not apply advertisement data. status: 0x%02x"
-#~ msgstr "Não é possível aplicar dados de anúncio. status: 0x%02x"
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Não é possível adicionar Característica."
 
-#~ msgid "Can not add Service."
-#~ msgstr "Não é possível adicionar o serviço."
+#~ msgid "Cannot set PPCP parameters."
+#~ msgstr "Não é possível definir parâmetros PPCP."