Merge branch 'origin/main' into Weblate.

3 files changed, 37 insertions, 37 deletions

diff --git a/locale/cs.po b/locale/cs.po
index e8287d266..39ea8fcd8 100644
--- a/locale/cs.po
+++ b/locale/cs.po
@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2020-11-27 23:57-0500\n"
-"PO-Revision-Date: 2020-12-02 20:29+0000\n"
+"PO-Revision-Date: 2020-12-04 18:33+0000\n"
 "Last-Translator: vkuthan <vit.kuthan@seznam.cz>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: cs\n"
@@ -22,7 +22,7 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 "\n"
-"Kód byl dokončen. Čekám na opětovné načtení.\n"
+"Kód byl dokončen. Čekám na opětovné nahrání.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -58,11 +58,11 @@ msgstr "%d adresní piny a %d rgb piny označují výšku %d, nikoli %d"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q failure: %d"
-msgstr ""
+msgstr "Selhání %q: %d"
 
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
-msgstr "%q se nyní používá"
+msgstr "Používá se %q"
 
 #: extmod/moductypes.c ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
@@ -70,11 +70,11 @@ msgstr "%q se nyní používá"
 #: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c py/objstr.c
 #: py/objstrunicode.c
 msgid "%q index out of range"
-msgstr "%q index je mimo rozsah"
+msgstr "Index %q je mimo rozsah"
 
 #: py/obj.c
 msgid "%q indices must be integers, not %q"
-msgstr "%q indexy musí být celá čísla, ne %q"
+msgstr "Indexy %q musí být celá čísla, ne %q"
 
 #: shared-bindings/vectorio/Polygon.c
 msgid "%q list must be a list"
@@ -90,11 +90,11 @@ msgstr "%q musí být >= 0"
 #: shared-bindings/memorymonitor/AllocationAlarm.c
 #: shared-bindings/vectorio/Circle.c shared-bindings/vectorio/Rectangle.c
 msgid "%q must be >= 1"
-msgstr " %q musí být > = 1"
+msgstr "%q musí být > = 1"
 
 #: shared-module/vectorio/Polygon.c
 msgid "%q must be a tuple of length 2"
-msgstr " %q musí být n-tice délky 2"
+msgstr "%q musí být n-tice délky 2"
 
 #: shared-bindings/canio/Match.c
 msgid "%q out of range"
@@ -102,23 +102,23 @@ msgstr "%q je mimo rozsah"
 
 #: ports/atmel-samd/common-hal/microcontroller/Pin.c
 msgid "%q pin invalid"
-msgstr ""
+msgstr "Pin %q není platný"
 
 #: shared-bindings/fontio/BuiltinFont.c
 msgid "%q should be an int"
-msgstr " %q by měl být int"
+msgstr "%q by měl být int"
 
 #: py/bc.c py/objnamedtuple.c
 msgid "%q() takes %d positional arguments but %d were given"
-msgstr ""
+msgstr "%q() vyžaduje %d pozičních argumentů, ale %d jich bylo zadáno"
 
 #: py/argcheck.c
 msgid "'%q' argument required"
-msgstr ""
+msgstr "Je vyžadován argument '%q'"
 
 #: py/runtime.c
 msgid "'%q' object cannot assign attribute '%q'"
-msgstr ""
+msgstr "'%q' nemůže přiřadit atribut '%q'"
 
 #: py/proto.c
 msgid "'%q' object does not support '%q'"
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index 239a83037..4ac698bd3 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2020-11-27 23:57-0500\n"
-"PO-Revision-Date: 2020-11-30 18:06+0000\n"
+"PO-Revision-Date: 2020-12-04 06:29+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -868,7 +868,7 @@ msgstr "Um endereço esperado"
 
 #: shared-bindings/alarm/__init__.c
 msgid "Expected an alarm"
-msgstr ""
+msgstr "Um alarme era esperado"
 
 #: shared-module/_pixelbuf/PixelBuf.c
 #, c-format
@@ -1019,7 +1019,7 @@ msgstr "O I2SOut não está disponível"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
-msgstr ""
+msgstr "IOs 0, 2 e 4 não suportam pullup interno em repouso (sleep)"
 
 #: shared-bindings/aesio/aes.c
 #, c-format
@@ -1324,7 +1324,7 @@ msgstr "Nenhum canal DMA encontrado"
 #: shared-module/busdevice/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
-msgstr ""
+msgstr "Nenhum dispositivo I2C no endereço: %x"
 
 #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/stm/common-hal/busio/SPI.c
@@ -1486,7 +1486,7 @@ msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/__init__.c
 msgid "Only one alarm.time alarm can be set."
-msgstr ""
+msgstr "Apenas um alarme alarm.time pode ser definido."
 
 #: shared-module/displayio/ColorConverter.c
 msgid "Only one color can be transparent at a time"
@@ -1551,7 +1551,7 @@ msgstr "Número do PIN já está reservado através da EXTI"
 
 #: ports/esp32s2/common-hal/alarm/__init__.c
 msgid "PinAlarm not yet implemented"
-msgstr ""
+msgstr "PinAlarm ainda não foi implementado"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
@@ -1772,7 +1772,7 @@ msgstr "Forneça pelo menos um pino UART"
 
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Supply one of monotonic_time or epoch_time"
-msgstr ""
+msgstr "Forneça um de monotonic_time ou de epoch_time"
 
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
@@ -1848,7 +1848,7 @@ msgstr "A largura do bloco deve dividir exatamente com a largura do bitmap"
 
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Time is in the past."
-msgstr ""
+msgstr "O tempo está no passado."
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 #, c-format
@@ -2592,7 +2592,7 @@ msgstr "end_x deve ser um int"
 
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "epoch_time not supported on this board"
-msgstr ""
+msgstr "O epoch_time não é compatível com esta placa"
 
 #: ports/nrf/common-hal/busio/UART.c
 #, c-format
@@ -2965,7 +2965,7 @@ msgstr "sintaxe inválida para o número"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "io must be rtc io"
-msgstr ""
+msgstr "O io deve ser rtc io"
 
 #: py/objtype.c
 msgid "issubclass() arg 1 must be a class"
@@ -3668,7 +3668,7 @@ msgstr "o trapz está definido para 1D arrays de igual tamanho"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "trigger level must be 0 or 1"
-msgstr ""
+msgstr "nível do gatilho deve ser 0 ou 1"
 
 #: extmod/ulab/code/linalg/linalg.c
 msgid "tuple index out of range"
@@ -3814,7 +3814,7 @@ msgstr "os vetores devem ter os mesmos comprimentos"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "wakeup conflict"
-msgstr ""
+msgstr "conflito de wakeup"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "watchdog not initialized"
diff --git a/locale/sv.po b/locale/sv.po
index db8d6a2d9..4b7a389c2 100644
--- a/locale/sv.po
+++ b/locale/sv.po
@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2020-11-27 23:57-0500\n"
-"PO-Revision-Date: 2020-11-30 18:06+0000\n"
+"PO-Revision-Date: 2020-12-07 20:26+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@@ -859,7 +859,7 @@ msgstr "Förväntade en adress"
 
 #: shared-bindings/alarm/__init__.c
 msgid "Expected an alarm"
-msgstr ""
+msgstr "Förväntade ett larm"
 
 #: shared-module/_pixelbuf/PixelBuf.c
 #, c-format
@@ -1008,7 +1008,7 @@ msgstr "I2SOut är inte tillgängligt"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
-msgstr ""
+msgstr "IO 0, 2 & 4 stöder inte intern pullup för sovläge"
 
 #: shared-bindings/aesio/aes.c
 #, c-format
@@ -1314,7 +1314,7 @@ msgstr "Ingen DMA-kanal hittades"
 #: shared-module/busdevice/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
-msgstr ""
+msgstr "Ingen I2C-enhet på adress: %x"
 
 #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/stm/common-hal/busio/SPI.c
@@ -1476,7 +1476,7 @@ msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/__init__.c
 msgid "Only one alarm.time alarm can be set."
-msgstr ""
+msgstr "Endast ett alarm.time kan ställas in."
 
 #: shared-module/displayio/ColorConverter.c
 msgid "Only one color can be transparent at a time"
@@ -1539,7 +1539,7 @@ msgstr "PInn-nummer redan reserverat av EXTI"
 
 #: ports/esp32s2/common-hal/alarm/__init__.c
 msgid "PinAlarm not yet implemented"
-msgstr ""
+msgstr "PinAlarm är inte implementerat ännu"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
@@ -1758,7 +1758,7 @@ msgstr "Ange minst en UART-pinne"
 
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Supply one of monotonic_time or epoch_time"
-msgstr ""
+msgstr "Ange en av monotonic_time eller epoch_time"
 
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
@@ -1833,7 +1833,7 @@ msgstr "Tile-bredd måste vara jämnt delbar med bredd på bitmap"
 
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Time is in the past."
-msgstr ""
+msgstr "Tid har passerats."
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 #, c-format
@@ -2566,7 +2566,7 @@ msgstr "color ska vara en int"
 
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "epoch_time not supported on this board"
-msgstr ""
+msgstr "epoch_time stöds inte av detta kort"
 
 #: ports/nrf/common-hal/busio/UART.c
 #, c-format
@@ -2939,7 +2939,7 @@ msgstr "ogiltig syntax för tal"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "io must be rtc io"
-msgstr ""
+msgstr "io måste vara rtc io"
 
 #: py/objtype.c
 msgid "issubclass() arg 1 must be a class"
@@ -3636,7 +3636,7 @@ msgstr "trapz är definierad för 1D-matriser med samma längd"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "trigger level must be 0 or 1"
-msgstr ""
+msgstr "triggernivå måste vara 0 eller 1"
 
 #: extmod/ulab/code/linalg/linalg.c
 msgid "tuple index out of range"
@@ -3782,7 +3782,7 @@ msgstr "vektorer måste ha samma längd"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "wakeup conflict"
-msgstr ""
+msgstr "wakeup-konflikt"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "watchdog not initialized"