Replace asf4 tree with submodule repo adafruit/asf4, branch circuitpython.

1 files changed, 0 insertions, 128 deletions

diff --git a/atmel-samd/asf4/samd21/include/instance/sercom3.h b/atmel-samd/asf4/samd21/include/instance/sercom3.h
deleted file mode 100644
index ad4d85d33..000000000
--- a/atmel-samd/asf4/samd21/include/instance/sercom3.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/**
- * \file
- *
- * \brief Instance description for SERCOM3
- *
- * Copyright (c) 2016 Atmel Corporation,
- *                    a wholly owned subsidiary of Microchip Technology Inc.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the Licence at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef _SAMD21_SERCOM3_INSTANCE_
-#define _SAMD21_SERCOM3_INSTANCE_
-
-/* ========== Register definition for SERCOM3 peripheral ========== */
-#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
-#define REG_SERCOM3_I2CM_CTRLA     (0x42001400) /**< \brief (SERCOM3) I2CM Control A */
-#define REG_SERCOM3_I2CM_CTRLB     (0x42001404) /**< \brief (SERCOM3) I2CM Control B */
-#define REG_SERCOM3_I2CM_BAUD      (0x4200140C) /**< \brief (SERCOM3) I2CM Baud Rate */
-#define REG_SERCOM3_I2CM_INTENCLR  (0x42001414) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */
-#define REG_SERCOM3_I2CM_INTENSET  (0x42001416) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */
-#define REG_SERCOM3_I2CM_INTFLAG   (0x42001418) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */
-#define REG_SERCOM3_I2CM_STATUS    (0x4200141A) /**< \brief (SERCOM3) I2CM Status */
-#define REG_SERCOM3_I2CM_SYNCBUSY  (0x4200141C) /**< \brief (SERCOM3) I2CM Syncbusy */
-#define REG_SERCOM3_I2CM_ADDR      (0x42001424) /**< \brief (SERCOM3) I2CM Address */
-#define REG_SERCOM3_I2CM_DATA      (0x42001428) /**< \brief (SERCOM3) I2CM Data */
-#define REG_SERCOM3_I2CM_DBGCTRL   (0x42001430) /**< \brief (SERCOM3) I2CM Debug Control */
-#define REG_SERCOM3_I2CS_CTRLA     (0x42001400) /**< \brief (SERCOM3) I2CS Control A */
-#define REG_SERCOM3_I2CS_CTRLB     (0x42001404) /**< \brief (SERCOM3) I2CS Control B */
-#define REG_SERCOM3_I2CS_INTENCLR  (0x42001414) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */
-#define REG_SERCOM3_I2CS_INTENSET  (0x42001416) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */
-#define REG_SERCOM3_I2CS_INTFLAG   (0x42001418) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */
-#define REG_SERCOM3_I2CS_STATUS    (0x4200141A) /**< \brief (SERCOM3) I2CS Status */
-#define REG_SERCOM3_I2CS_SYNCBUSY  (0x4200141C) /**< \brief (SERCOM3) I2CS Syncbusy */
-#define REG_SERCOM3_I2CS_ADDR      (0x42001424) /**< \brief (SERCOM3) I2CS Address */
-#define REG_SERCOM3_I2CS_DATA      (0x42001428) /**< \brief (SERCOM3) I2CS Data */
-#define REG_SERCOM3_SPI_CTRLA      (0x42001400) /**< \brief (SERCOM3) SPI Control A */
-#define REG_SERCOM3_SPI_CTRLB      (0x42001404) /**< \brief (SERCOM3) SPI Control B */
-#define REG_SERCOM3_SPI_BAUD       (0x4200140C) /**< \brief (SERCOM3) SPI Baud Rate */
-#define REG_SERCOM3_SPI_INTENCLR   (0x42001414) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */
-#define REG_SERCOM3_SPI_INTENSET   (0x42001416) /**< \brief (SERCOM3) SPI Interrupt Enable Set */
-#define REG_SERCOM3_SPI_INTFLAG    (0x42001418) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */
-#define REG_SERCOM3_SPI_STATUS     (0x4200141A) /**< \brief (SERCOM3) SPI Status */
-#define REG_SERCOM3_SPI_SYNCBUSY   (0x4200141C) /**< \brief (SERCOM3) SPI Syncbusy */
-#define REG_SERCOM3_SPI_ADDR       (0x42001424) /**< \brief (SERCOM3) SPI Address */
-#define REG_SERCOM3_SPI_DATA       (0x42001428) /**< \brief (SERCOM3) SPI Data */
-#define REG_SERCOM3_SPI_DBGCTRL    (0x42001430) /**< \brief (SERCOM3) SPI Debug Control */
-#define REG_SERCOM3_USART_CTRLA    (0x42001400) /**< \brief (SERCOM3) USART Control A */
-#define REG_SERCOM3_USART_CTRLB    (0x42001404) /**< \brief (SERCOM3) USART Control B */
-#define REG_SERCOM3_USART_BAUD     (0x4200140C) /**< \brief (SERCOM3) USART Baud Rate */
-#define REG_SERCOM3_USART_RXPL     (0x4200140E) /**< \brief (SERCOM3) USART Receive Pulse Length */
-#define REG_SERCOM3_USART_INTENCLR (0x42001414) /**< \brief (SERCOM3) USART Interrupt Enable Clear */
-#define REG_SERCOM3_USART_INTENSET (0x42001416) /**< \brief (SERCOM3) USART Interrupt Enable Set */
-#define REG_SERCOM3_USART_INTFLAG  (0x42001418) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */
-#define REG_SERCOM3_USART_STATUS   (0x4200141A) /**< \brief (SERCOM3) USART Status */
-#define REG_SERCOM3_USART_SYNCBUSY (0x4200141C) /**< \brief (SERCOM3) USART Syncbusy */
-#define REG_SERCOM3_USART_DATA     (0x42001428) /**< \brief (SERCOM3) USART Data */
-#define REG_SERCOM3_USART_DBGCTRL  (0x42001430) /**< \brief (SERCOM3) USART Debug Control */
-#else
-#define REG_SERCOM3_I2CM_CTRLA     (*(RwReg  *)0x42001400UL) /**< \brief (SERCOM3) I2CM Control A */
-#define REG_SERCOM3_I2CM_CTRLB     (*(RwReg  *)0x42001404UL) /**< \brief (SERCOM3) I2CM Control B */
-#define REG_SERCOM3_I2CM_BAUD      (*(RwReg  *)0x4200140CUL) /**< \brief (SERCOM3) I2CM Baud Rate */
-#define REG_SERCOM3_I2CM_INTENCLR  (*(RwReg8 *)0x42001414UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */
-#define REG_SERCOM3_I2CM_INTENSET  (*(RwReg8 *)0x42001416UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */
-#define REG_SERCOM3_I2CM_INTFLAG   (*(RwReg8 *)0x42001418UL) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */
-#define REG_SERCOM3_I2CM_STATUS    (*(RwReg16*)0x4200141AUL) /**< \brief (SERCOM3) I2CM Status */
-#define REG_SERCOM3_I2CM_SYNCBUSY  (*(RoReg  *)0x4200141CUL) /**< \brief (SERCOM3) I2CM Syncbusy */
-#define REG_SERCOM3_I2CM_ADDR      (*(RwReg  *)0x42001424UL) /**< \brief (SERCOM3) I2CM Address */
-#define REG_SERCOM3_I2CM_DATA      (*(RwReg8 *)0x42001428UL) /**< \brief (SERCOM3) I2CM Data */
-#define REG_SERCOM3_I2CM_DBGCTRL   (*(RwReg8 *)0x42001430UL) /**< \brief (SERCOM3) I2CM Debug Control */
-#define REG_SERCOM3_I2CS_CTRLA     (*(RwReg  *)0x42001400UL) /**< \brief (SERCOM3) I2CS Control A */
-#define REG_SERCOM3_I2CS_CTRLB     (*(RwReg  *)0x42001404UL) /**< \brief (SERCOM3) I2CS Control B */
-#define REG_SERCOM3_I2CS_INTENCLR  (*(RwReg8 *)0x42001414UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */
-#define REG_SERCOM3_I2CS_INTENSET  (*(RwReg8 *)0x42001416UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */
-#define REG_SERCOM3_I2CS_INTFLAG   (*(RwReg8 *)0x42001418UL) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */
-#define REG_SERCOM3_I2CS_STATUS    (*(RwReg16*)0x4200141AUL) /**< \brief (SERCOM3) I2CS Status */
-#define REG_SERCOM3_I2CS_SYNCBUSY  (*(RoReg  *)0x4200141CUL) /**< \brief (SERCOM3) I2CS Syncbusy */
-#define REG_SERCOM3_I2CS_ADDR      (*(RwReg  *)0x42001424UL) /**< \brief (SERCOM3) I2CS Address */
-#define REG_SERCOM3_I2CS_DATA      (*(RwReg8 *)0x42001428UL) /**< \brief (SERCOM3) I2CS Data */
-#define REG_SERCOM3_SPI_CTRLA      (*(RwReg  *)0x42001400UL) /**< \brief (SERCOM3) SPI Control A */
-#define REG_SERCOM3_SPI_CTRLB      (*(RwReg  *)0x42001404UL) /**< \brief (SERCOM3) SPI Control B */
-#define REG_SERCOM3_SPI_BAUD       (*(RwReg8 *)0x4200140CUL) /**< \brief (SERCOM3) SPI Baud Rate */
-#define REG_SERCOM3_SPI_INTENCLR   (*(RwReg8 *)0x42001414UL) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */
-#define REG_SERCOM3_SPI_INTENSET   (*(RwReg8 *)0x42001416UL) /**< \brief (SERCOM3) SPI Interrupt Enable Set */
-#define REG_SERCOM3_SPI_INTFLAG    (*(RwReg8 *)0x42001418UL) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */
-#define REG_SERCOM3_SPI_STATUS     (*(RwReg16*)0x4200141AUL) /**< \brief (SERCOM3) SPI Status */
-#define REG_SERCOM3_SPI_SYNCBUSY   (*(RoReg  *)0x4200141CUL) /**< \brief (SERCOM3) SPI Syncbusy */
-#define REG_SERCOM3_SPI_ADDR       (*(RwReg  *)0x42001424UL) /**< \brief (SERCOM3) SPI Address */
-#define REG_SERCOM3_SPI_DATA       (*(RwReg  *)0x42001428UL) /**< \brief (SERCOM3) SPI Data */
-#define REG_SERCOM3_SPI_DBGCTRL    (*(RwReg8 *)0x42001430UL) /**< \brief (SERCOM3) SPI Debug Control */
-#define REG_SERCOM3_USART_CTRLA    (*(RwReg  *)0x42001400UL) /**< \brief (SERCOM3) USART Control A */
-#define REG_SERCOM3_USART_CTRLB    (*(RwReg  *)0x42001404UL) /**< \brief (SERCOM3) USART Control B */
-#define REG_SERCOM3_USART_BAUD     (*(RwReg16*)0x4200140CUL) /**< \brief (SERCOM3) USART Baud Rate */
-#define REG_SERCOM3_USART_RXPL     (*(RwReg8 *)0x4200140EUL) /**< \brief (SERCOM3) USART Receive Pulse Length */
-#define REG_SERCOM3_USART_INTENCLR (*(RwReg8 *)0x42001414UL) /**< \brief (SERCOM3) USART Interrupt Enable Clear */
-#define REG_SERCOM3_USART_INTENSET (*(RwReg8 *)0x42001416UL) /**< \brief (SERCOM3) USART Interrupt Enable Set */
-#define REG_SERCOM3_USART_INTFLAG  (*(RwReg8 *)0x42001418UL) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */
-#define REG_SERCOM3_USART_STATUS   (*(RwReg16*)0x4200141AUL) /**< \brief (SERCOM3) USART Status */
-#define REG_SERCOM3_USART_SYNCBUSY (*(RoReg  *)0x4200141CUL) /**< \brief (SERCOM3) USART Syncbusy */
-#define REG_SERCOM3_USART_DATA     (*(RwReg16*)0x42001428UL) /**< \brief (SERCOM3) USART Data */
-#define REG_SERCOM3_USART_DBGCTRL  (*(RwReg8 *)0x42001430UL) /**< \brief (SERCOM3) USART Debug Control */
-#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
-
-/* ========== Instance parameters for SERCOM3 peripheral ========== */
-#define SERCOM3_DMAC_ID_RX          7        // Index of DMA RX trigger
-#define SERCOM3_DMAC_ID_TX          8        // Index of DMA TX trigger
-#define SERCOM3_GCLK_ID_CORE        23       // Index of Generic Clock for Core
-#define SERCOM3_GCLK_ID_SLOW        19       // Index of Generic Clock for SMbus timeout
-#define SERCOM3_INT_MSB             6       
-
-#endif /* _SAMD21_SERCOM3_INSTANCE_ */