atmel-samd: Add support for SPI.

Also separate out the ASF config headers that are shared across all boards.

4 files changed, 343 insertions, 0 deletions

diff --git a/atmel-samd/asf_conf/conf_clocks.h b/atmel-samd/asf_conf/conf_clocks.h
new file mode 100644
index 000000000..20ee967e2
--- /dev/null
+++ b/atmel-samd/asf_conf/conf_clocks.h
@@ -0,0 +1,197 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 Clock configuration
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#include <clock.h>
+
+#ifndef CONF_CLOCKS_H_INCLUDED
+#  define CONF_CLOCKS_H_INCLUDED
+
+/* System clock bus configuration */
+#  define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT     false
+#  define CONF_CLOCK_FLASH_WAIT_STATES            2
+#  define CONF_CLOCK_CPU_DIVIDER                  SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBA_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBB_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+#  define CONF_CLOCK_APBC_DIVIDER                 SYSTEM_MAIN_CLOCK_DIV_1
+
+/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
+#  define CONF_CLOCK_OSC8M_PRESCALER              SYSTEM_OSC8M_DIV_1
+#  define CONF_CLOCK_OSC8M_ON_DEMAND              true
+#  define CONF_CLOCK_OSC8M_RUN_IN_STANDBY         false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
+#  define CONF_CLOCK_XOSC_ENABLE                  false
+#  define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL        SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY      12000000UL
+#  define CONF_CLOCK_XOSC_STARTUP_TIME            SYSTEM_XOSC_STARTUP_32768
+#  define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL       true
+#  define CONF_CLOCK_XOSC_ON_DEMAND               true
+#  define CONF_CLOCK_XOSC_RUN_IN_STANDBY          false
+
+/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
+#  define CONF_CLOCK_XOSC32K_ENABLE               true
+#  define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL     SYSTEM_CLOCK_EXTERNAL_CRYSTAL
+#  define CONF_CLOCK_XOSC32K_STARTUP_TIME         SYSTEM_XOSC32K_STARTUP_65536
+#  define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL  false
+#  define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT    false
+#  define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT  true
+#  define CONF_CLOCK_XOSC32K_ON_DEMAND            false
+#  define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY       true
+
+/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
+#  define CONF_CLOCK_OSC32K_ENABLE                false
+#  define CONF_CLOCK_OSC32K_STARTUP_TIME          SYSTEM_OSC32K_STARTUP_130
+#  define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT    true
+#  define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT   true
+#  define CONF_CLOCK_OSC32K_ON_DEMAND             true
+#  define CONF_CLOCK_OSC32K_RUN_IN_STANDBY        false
+
+/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
+#  define CONF_CLOCK_DFLL_ENABLE                  true
+#  define CONF_CLOCK_DFLL_LOOP_MODE               SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED
+#  define CONF_CLOCK_DFLL_ON_DEMAND               true
+
+/* DFLL open loop mode configuration */
+#  define CONF_CLOCK_DFLL_FINE_VALUE              (512)
+
+/* DFLL closed loop mode configuration */
+#  define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR   GCLK_GENERATOR_1
+#  define CONF_CLOCK_DFLL_MULTIPLY_FACTOR         (48000000 / 32768)
+#  define CONF_CLOCK_DFLL_QUICK_LOCK              true
+#  define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK   true
+#  define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP     true
+#  define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE      true
+#  define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE    (0x1f / 4)
+#  define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE      (0xff / 4)
+
+/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */
+#  define CONF_CLOCK_DPLL_ENABLE                  false
+#  define CONF_CLOCK_DPLL_ON_DEMAND               true
+#  define CONF_CLOCK_DPLL_RUN_IN_STANDBY          false
+#  define CONF_CLOCK_DPLL_LOCK_BYPASS             false
+#  define CONF_CLOCK_DPLL_WAKE_UP_FAST            false
+#  define CONF_CLOCK_DPLL_LOW_POWER_ENABLE        false
+
+#  define CONF_CLOCK_DPLL_LOCK_TIME               SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT
+#  define CONF_CLOCK_DPLL_REFERENCE_CLOCK         SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K
+#  define CONF_CLOCK_DPLL_FILTER                  SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT
+
+#  define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY     32768
+#  define CONF_CLOCK_DPLL_REFERENCE_DIVIDER       1
+#  define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY        48000000
+
+/* DPLL GCLK reference configuration */
+#  define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR  GCLK_GENERATOR_1
+/* DPLL GCLK lock timer configuration */
+#  define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR     GCLK_GENERATOR_1
+
+/* Set this to true to configure the GCLK when running clocks_init. If set to
+ * false, none of the GCLK generators will be configured in clocks_init(). */
+#  define CONF_CLOCK_CONFIGURE_GCLK               true
+
+/* Configure GCLK generator 0 (Main Clock) */
+#  define CONF_CLOCK_GCLK_0_ENABLE                true
+#  define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY        true
+#  define CONF_CLOCK_GCLK_0_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_DFLL
+#  define CONF_CLOCK_GCLK_0_PRESCALER             1
+#  define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 1 */
+#  define CONF_CLOCK_GCLK_1_ENABLE                true
+#  define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_1_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_XOSC32K
+#  define CONF_CLOCK_GCLK_1_PRESCALER             1
+#  define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE         true
+
+/* Configure GCLK generator 2 (RTC) */
+#  define CONF_CLOCK_GCLK_2_ENABLE                false
+#  define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_2_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC32K
+#  define CONF_CLOCK_GCLK_2_PRESCALER             32
+#  define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 3 */
+#  define CONF_CLOCK_GCLK_3_ENABLE                true
+#  define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_3_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_3_PRESCALER             1
+#  define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 4 */
+#  define CONF_CLOCK_GCLK_4_ENABLE                false
+#  define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_4_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_4_PRESCALER             1
+#  define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 5 */
+#  define CONF_CLOCK_GCLK_5_ENABLE                false
+#  define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_5_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_5_PRESCALER             1
+#  define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 6 */
+#  define CONF_CLOCK_GCLK_6_ENABLE                false
+#  define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_6_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_6_PRESCALER             1
+#  define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 7 */
+#  define CONF_CLOCK_GCLK_7_ENABLE                false
+#  define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_7_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_7_PRESCALER             1
+#  define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE         false
+
+/* Configure GCLK generator 8 */
+#  define CONF_CLOCK_GCLK_8_ENABLE                false
+#  define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY        false
+#  define CONF_CLOCK_GCLK_8_CLOCK_SOURCE          SYSTEM_CLOCK_SOURCE_OSC8M
+#  define CONF_CLOCK_GCLK_8_PRESCALER             1
+#  define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE         false
+
+#endif /* CONF_CLOCKS_H_INCLUDED */
diff --git a/atmel-samd/asf_conf/conf_sleepmgr.h b/atmel-samd/asf_conf/conf_sleepmgr.h
new file mode 100644
index 000000000..281a36078
--- /dev/null
+++ b/atmel-samd/asf_conf/conf_sleepmgr.h
@@ -0,0 +1,52 @@
+/**
+ * \file
+ *
+ * \brief Sleep manager configuration
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef CONF_SLEEPMGR_H_INCLUDED
+#define CONF_SLEEPMGR_H_INCLUDED
+
+#define CONFIG_SLEEPMGR_ENABLE
+
+#endif /* CONF_SLEEPMGR_H_INCLUDED */
diff --git a/atmel-samd/asf_conf/conf_spi.h b/atmel-samd/asf_conf/conf_spi.h
new file mode 100644
index 000000000..d093a58c5
--- /dev/null
+++ b/atmel-samd/asf_conf/conf_spi.h
@@ -0,0 +1,54 @@
+/**
+ * \file
+ *
+ * \brief SAM D21 SPI configuration
+ *
+ * Copyright (C) 2013-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+
+#ifndef CONF_SPI_H_INCLUDED
+#define CONF_SPI_H_INCLUDED
+
+#define CONF_SPI_MASTER_ENABLE     true
+#define CONF_SPI_SLAVE_ENABLE      false
+
+#endif /* CONF_SPI_H_INCLUDED */
diff --git a/atmel-samd/asf_conf/user_board.h b/atmel-samd/asf_conf/user_board.h
new file mode 100644
index 000000000..39980a7d2
--- /dev/null
+++ b/atmel-samd/asf_conf/user_board.h
@@ -0,0 +1,40 @@
+/**
+ * \file
+ *
+ * \brief User board definition template
+ *
+ */
+
+ /* This file is intended to contain definitions and configuration details for
+ * features and devices that are available on the board, e.g., frequency and
+ * startup time for an external crystal, external memory devices, LED and USART
+ * pins.
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef USER_BOARD_H
+#define USER_BOARD_H
+
+#include <conf_board.h>
+
+// External oscillator settings.
+// Uncomment and set correct values if external oscillator is used.
+
+// External oscillator frequency
+//#define BOARD_XOSC_HZ          8000000
+
+// External oscillator type.
+//!< External clock signal
+//#define BOARD_XOSC_TYPE        XOSC_TYPE_EXTERNAL
+//!< 32.768 kHz resonator on TOSC
+//#define BOARD_XOSC_TYPE        XOSC_TYPE_32KHZ
+//!< 0.4 to 16 MHz resonator on XTALS
+//#define BOARD_XOSC_TYPE        XOSC_TYPE_XTAL
+
+// External oscillator startup time
+//#define BOARD_XOSC_STARTUP_US  500000
+
+
+#endif // USER_BOARD_H