Merge remote-tracking branch 'upstream/master' into stm32-docfix

1 files changed, 393 insertions, 62 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 6069bdd97..e9e7838cb 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-02-05 15:55-0800\n"
+"POT-Creation-Date: 2020-04-15 12:24-0400\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -53,6 +53,11 @@ msgstr ""
 msgid "%%c requires int or char"
 msgstr ""
 
+#: shared-bindings/_protomatter/Protomatter.c
+#, c-format
+msgid "%d address pins and %d rgb pins indicate a height of %d, not %d"
+msgstr ""
+
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
 msgstr ""
@@ -133,6 +138,10 @@ msgstr ""
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr ""
 
+#: py/runtime.c
+msgid "'%s' object cannot assign attribute '%q'"
+msgstr ""
+
 #: py/proto.c
 msgid "'%s' object does not support '%q'"
 msgstr ""
@@ -184,6 +193,10 @@ msgid "'align' requires 1 argument"
 msgstr ""
 
 #: py/compile.c
+msgid "'async for' or 'async with' outside async function"
+msgstr ""
+
+#: py/compile.c
 msgid "'await' outside function"
 msgstr ""
 
@@ -273,7 +286,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
-#: ports/nrf/common-hal/pulseio/PulseOut.c shared-bindings/pulseio/PWMOut.c
+#: ports/nrf/peripherals/nrf/timers.c shared-bindings/pulseio/PWMOut.c
 #: shared-module/_pew/PewPew.c
 msgid "All timers in use"
 msgstr ""
@@ -313,6 +326,10 @@ msgstr ""
 msgid "Array values should be single bytes."
 msgstr ""
 
+#: shared-bindings/_protomatter/Protomatter.c
+msgid "At most %d %q may be specified (not %d)"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
@@ -328,6 +345,7 @@ msgid ""
 msgstr ""
 
 #: shared-module/displayio/Display.c
+#: shared-module/framebufferio/FramebufferDisplay.c
 msgid "Below minimum frame rate"
 msgstr ""
 
@@ -343,7 +361,9 @@ msgstr ""
 msgid "Both pins must support hardware interrupts"
 msgstr ""
 
+#: shared-bindings/_protomatter/Protomatter.c
 #: shared-bindings/displayio/Display.c
+#: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Brightness must be 0-1.0"
 msgstr ""
 
@@ -352,6 +372,7 @@ msgid "Brightness must be between 0 and 255"
 msgstr ""
 
 #: shared-bindings/displayio/Display.c
+#: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Brightness not adjustable"
 msgstr ""
 
@@ -366,10 +387,12 @@ msgid "Buffer incorrect size. Should be %d bytes."
 msgstr ""
 
 #: shared-bindings/displayio/Display.c
+#: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Buffer is not a bytearray."
 msgstr ""
 
 #: shared-bindings/displayio/Display.c
+#: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Buffer is too small"
 msgstr ""
 
@@ -386,6 +409,11 @@ msgstr ""
 msgid "Buffer too large and unable to allocate"
 msgstr ""
 
+#: shared-bindings/_bleio/PacketBuffer.c
+#, c-format
+msgid "Buffer too short by %d bytes"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
@@ -452,6 +480,10 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Cannot specify RTS or CTS in RS485 mode"
+msgstr ""
+
 #: py/objslice.c
 msgid "Cannot subclass slice"
 msgstr ""
@@ -464,7 +496,7 @@ msgstr ""
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
@@ -525,31 +557,31 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not re-init timer"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not restart PWM"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not start PWM"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Could not start interrupt, RX busy"
 msgstr ""
 
@@ -575,11 +607,11 @@ msgstr ""
 msgid "Crash into the HardFault_Handler."
 msgstr ""
 
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+#: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "DAC Channel Init Error"
 msgstr ""
 
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+#: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "DAC Device Init Error"
 msgstr ""
 
@@ -613,11 +645,13 @@ msgid "DigitalInOut not supported on given pin"
 msgstr ""
 
 #: shared-bindings/displayio/Display.c
+#: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Display must have a 16 bit colorspace."
 msgstr ""
 
 #: shared-bindings/displayio/Display.c
 #: shared-bindings/displayio/EPaperDisplay.c
+#: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr ""
 
@@ -669,6 +703,10 @@ msgstr ""
 msgid "Extended advertisements with scan response not supported."
 msgstr ""
 
+#: extmod/ulab/code/fft.c
+msgid "FFT is defined for ndarrays only"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -686,6 +724,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
+#: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
@@ -719,7 +758,7 @@ msgstr ""
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 
@@ -730,6 +769,7 @@ msgstr ""
 
 #: shared-bindings/displayio/Display.c
 #: shared-bindings/displayio/EPaperDisplay.c
+#: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Group already used"
 msgstr ""
 
@@ -737,11 +777,11 @@ msgstr ""
 msgid "Group full"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -749,7 +789,7 @@ msgstr ""
 msgid "I/O operation on closed file"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "I2C Init Error"
 msgstr ""
 
@@ -779,7 +819,7 @@ msgstr ""
 msgid "Insufficient encryption"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Internal define error"
 msgstr ""
 
@@ -788,7 +828,7 @@ msgstr ""
 msgid "Invalid %q pin"
 msgstr ""
 
-#: ports/stm32f4/common-hal/analogio/AnalogIn.c
+#: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Invalid ADC Unit value"
 msgstr ""
 
@@ -796,11 +836,11 @@ msgstr ""
 msgid "Invalid BMP file"
 msgstr ""
 
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+#: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "Invalid DAC pin supplied"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Invalid I2C pin selection"
 msgstr ""
 
@@ -810,16 +850,15 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm32f4/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
-#: py/moduerrno.c
+#: py/moduerrno.c shared-module/_protomatter/Protomatter.c
 msgid "Invalid argument"
 msgstr ""
 
@@ -827,7 +866,7 @@ msgstr ""
 msgid "Invalid bits per value"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
+#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Invalid buffer size"
 msgstr ""
 
@@ -855,7 +894,7 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr ""
 
@@ -868,12 +907,13 @@ msgid "Invalid number of bits"
 msgstr ""
 
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
+#: shared-bindings/displayio/FourWire.c
 msgid "Invalid phase"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
-#: shared-bindings/pulseio/PWMOut.c
+#: shared-bindings/pulseio/PWMOut.c shared-module/_protomatter/Protomatter.c
 msgid "Invalid pin"
 msgstr ""
 
@@ -891,11 +931,15 @@ msgstr ""
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
 msgid "Invalid pins"
 msgstr ""
 
+#: ports/stm/common-hal/pulseio/PWMOut.c
+msgid "Invalid pins for PWMOut"
+msgstr ""
+
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
+#: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
 msgstr ""
 
@@ -923,7 +967,7 @@ msgstr ""
 msgid "Invalid wave file"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid word/bit length"
 msgstr ""
 
@@ -972,7 +1016,7 @@ msgstr ""
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Missing MISO or MOSI Pin"
 msgstr ""
 
@@ -980,10 +1024,19 @@ msgstr ""
 msgid "Must be a %q subclass."
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Must provide MISO or MOSI pin"
 msgstr ""
 
+#: shared-bindings/_protomatter/Protomatter.c
+#, c-format
+msgid "Must use a multiple of 6 rgb pins, not %d"
+msgstr ""
+
+#: py/parse.c
+msgid "Name too long"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 msgid "Negative step not supported"
 msgstr ""
@@ -993,7 +1046,7 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+#: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr ""
 
@@ -1002,23 +1055,23 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr ""
 
@@ -1047,7 +1100,7 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr ""
 
@@ -1063,6 +1116,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 
+#: shared-module/_protomatter/Protomatter.c
+msgid "No timer available"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
@@ -1117,7 +1174,8 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
-#: ports/stm32f4/common-hal/displayio/ParallelBus.c
+#: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
 
@@ -1129,10 +1187,22 @@ msgstr ""
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
-#: ports/stm32f4/common-hal/analogio/AnalogIn.c
+#: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr ""
 
+#: ports/stm/common-hal/pulseio/PulseIn.c
+msgid "Pin number already reserved by EXTI"
+msgstr ""
+
+#: shared-bindings/_protomatter/Protomatter.c
+#, c-format
+msgid ""
+"Pinout uses %d bytes per element, which consumes more than the ideal %d "
+"bytes.  If this cannot be avoided, pass allow_inefficient=True to the "
+"constructor"
+msgstr ""
+
 #: py/builtinhelp.c
 msgid "Plus any modules on the filesystem\n"
 msgstr ""
@@ -1149,26 +1219,31 @@ msgstr ""
 msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 msgstr ""
 
-#: shared-bindings/digitalio/DigitalInOut.c
-msgid "Pull not used when direction is output."
+#: shared-module/_protomatter/Protomatter.c
+#, c-format
+msgid "Protomatter internal error #%d"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PulseIn.c
-msgid "PulseIn not yet supported"
+#: shared-bindings/digitalio/DigitalInOut.c
+msgid "Pull not used when direction is output."
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PulseOut.c
-msgid "PulseOut not yet supported"
+#: ports/stm/common-hal/pulseio/PulseOut.c
+msgid "PulseOut not supported on this chip"
 msgstr ""
 
-#: ports/stm32f4/common-hal/os/__init__.c
+#: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr ""
 
-#: ports/stm32f4/common-hal/os/__init__.c
+#: ports/stm/common-hal/os/__init__.c
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "RS485 inversion specified when not in RS485 mode"
+msgstr ""
+
 #: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
 #: ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
@@ -1178,7 +1253,12 @@ msgstr ""
 msgid "RTC is not supported on this board"
 msgstr ""
 
-#: ports/stm32f4/common-hal/os/__init__.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+msgid "RTS/CTS/RS485 Not yet supported on this device"
+msgstr ""
+
+#: ports/stm/common-hal/os/__init__.c
 msgid "Random number generation error"
 msgstr ""
 
@@ -1218,11 +1298,11 @@ msgstr ""
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "SPI Init Error"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "SPI Re-initialization error"
 msgstr ""
 
@@ -1239,6 +1319,14 @@ msgstr ""
 msgid "Scan already in progess. Stop with stop_scan."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Selected CTS pin not valid"
+msgstr ""
+
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Selected RTS pin not valid"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Serializer in use"
@@ -1265,10 +1353,14 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: ports/stm/common-hal/microcontroller/Processor.c
+msgid "Temperature read timed out"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
@@ -1324,13 +1416,11 @@ msgstr ""
 msgid "Too many channels in sample."
 msgstr ""
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/displayio/ParallelBus.c
+#: shared-module/displayio/__init__.c
 msgid "Too many display busses"
 msgstr ""
 
-#: shared-bindings/displayio/Display.c
-#: shared-bindings/displayio/EPaperDisplay.c
+#: shared-module/displayio/__init__.c
 msgid "Too many displays"
 msgstr ""
 
@@ -1342,23 +1432,23 @@ msgstr ""
 msgid "Tuple or struct_time argument required"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "UART Buffer allocation error"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "UART De-init error"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "UART Init Error"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "UART Re-init error"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
 
@@ -1477,6 +1567,10 @@ msgstr ""
 msgid "Viper functions don't currently support more than 4 arguments"
 msgstr ""
 
+#: ports/stm/common-hal/microcontroller/Processor.c
+msgid "Voltage read timed out"
+msgstr ""
+
 #: main.c
 msgid "WARNING: Your code filename has two extensions\n"
 msgstr ""
@@ -1537,10 +1631,18 @@ msgstr ""
 msgid "addresses is empty"
 msgstr ""
 
+#: extmod/ulab/code/vectorise.c
+msgid "arctan2 is implemented for scalars and ndarrays only"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr ""
 
+#: extmod/ulab/code/numerical.c
+msgid "argsort argument must be an ndarray"
+msgstr ""
+
 #: py/runtime.c
 msgid "argument has wrong type"
 msgstr ""
@@ -1554,14 +1656,34 @@ msgstr ""
 msgid "argument should be a '%q' not a '%q'"
 msgstr ""
 
+#: extmod/ulab/code/linalg.c
+msgid "arguments must be ndarrays"
+msgstr ""
+
 #: py/objarray.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
 
+#: extmod/ulab/code/numerical.c
+msgid "attempt to get argmin/argmax of an empty sequence"
+msgstr ""
+
 #: py/objstr.c
 msgid "attributes not supported yet"
 msgstr ""
 
+#: extmod/ulab/code/numerical.c
+msgid "axis must be -1, 0, None, or 1"
+msgstr ""
+
+#: extmod/ulab/code/numerical.c
+msgid "axis must be -1, 0, or 1"
+msgstr ""
+
+#: extmod/ulab/code/numerical.c
+msgid "axis must be None, 0, or 1"
+msgstr ""
+
 #: py/builtinevex.c
 msgid "bad compile mode"
 msgstr ""
@@ -1804,6 +1926,10 @@ msgstr ""
 msgid "cannot perform relative import"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "cannot reshape array (incompatible input/output shape)"
+msgstr ""
+
 #: py/emitnative.c
 msgid "casting"
 msgstr ""
@@ -1860,6 +1986,30 @@ msgstr ""
 msgid "conversion to object"
 msgstr ""
 
+#: extmod/ulab/code/filter.c
+msgid "convolve arguments must be linear arrays"
+msgstr ""
+
+#: extmod/ulab/code/filter.c
+msgid "convolve arguments must be ndarrays"
+msgstr ""
+
+#: extmod/ulab/code/filter.c
+msgid "convolve arguments must not be empty"
+msgstr ""
+
+#: extmod/ulab/code/ndarray.c
+msgid "could not broadast input array from shape"
+msgstr ""
+
+#: extmod/ulab/code/poly.c
+msgid "could not invert Vandermonde matrix"
+msgstr ""
+
+#: extmod/ulab/code/numerical.c
+msgid "ddof must be smaller than length of data set"
+msgstr ""
+
 #: py/parsenum.c
 msgid "decimal numbers not supported"
 msgstr ""
@@ -1885,6 +2035,10 @@ msgstr ""
 msgid "dict update sequence has wrong length"
 msgstr ""
 
+#: extmod/ulab/code/numerical.c
+msgid "diff argument must be an ndarray"
+msgstr ""
+
 #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
 #: shared-bindings/math/__init__.c
 msgid "division by zero"
@@ -1955,6 +2109,26 @@ msgstr ""
 msgid "extra positional arguments given"
 msgstr ""
 
+#: py/parse.c
+msgid "f-string expression part cannot include a '#'"
+msgstr ""
+
+#: py/parse.c
+msgid "f-string expression part cannot include a backslash"
+msgstr ""
+
+#: py/parse.c
+msgid "f-string: empty expression not allowed"
+msgstr ""
+
+#: py/parse.c
+msgid "f-string: expecting '}'"
+msgstr ""
+
+#: py/parse.c
+msgid "f-string: single '}' is not allowed"
+msgstr ""
+
 #: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
@@ -1964,6 +2138,14 @@ msgstr ""
 msgid "filesystem must provide mount method"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "first argument must be an iterable"
+msgstr ""
+
+#: extmod/ulab/code/vectorise.c
+msgid "first argument must be an ndarray"
+msgstr ""
+
 #: py/objtype.c
 msgid "first argument to super() must be type"
 msgstr ""
@@ -1972,6 +2154,14 @@ msgstr ""
 msgid "firstbit must be MSB"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "flattening order must be either 'C', or 'F'"
+msgstr ""
+
+#: extmod/ulab/code/numerical.c
+msgid "flip argument must be an ndarray"
+msgstr ""
+
 #: py/objint.c
 msgid "float too big"
 msgstr ""
@@ -2064,9 +2254,14 @@ msgstr ""
 msgid "incorrect padding"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "index is out of bounds"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c
+#: ports/nrf/common-hal/pulseio/PulseIn.c
+#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr ""
 
@@ -2074,10 +2269,46 @@ msgstr ""
 msgid "indices must be integers"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "indices must be integers, slices, or Boolean lists"
+msgstr ""
+
 #: py/compile.c
 msgid "inline assembler must be a function"
 msgstr ""
 
+#: extmod/ulab/code/create.c
+msgid "input argument must be an integer or a 2-tuple"
+msgstr ""
+
+#: extmod/ulab/code/fft.c
+msgid "input array length must be power of 2"
+msgstr ""
+
+#: extmod/ulab/code/poly.c
+msgid "input data must be an iterable"
+msgstr ""
+
+#: extmod/ulab/code/linalg.c
+msgid "input matrix is asymmetric"
+msgstr ""
+
+#: extmod/ulab/code/linalg.c
+msgid "input matrix is singular"
+msgstr ""
+
+#: extmod/ulab/code/linalg.c
+msgid "input must be square matrix"
+msgstr ""
+
+#: extmod/ulab/code/numerical.c
+msgid "input must be tuple, list, range, or ndarray"
+msgstr ""
+
+#: extmod/ulab/code/poly.c
+msgid "input vectors must be of equal length"
+msgstr ""
+
 #: py/parsenum.c
 msgid "int() arg 2 must be >= 2 and <= 36"
 msgstr ""
@@ -2156,6 +2387,14 @@ msgstr ""
 msgid "issubclass() arg 2 must be a class or a tuple of classes"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "iterables are not of the same length"
+msgstr ""
+
+#: extmod/ulab/code/linalg.c
+msgid "iterations did not converge"
+msgstr ""
+
 #: py/objstr.c
 msgid "join expects a list of str/bytes objects consistent with self object"
 msgstr ""
@@ -2204,6 +2443,10 @@ msgstr ""
 msgid "long int not supported in this build"
 msgstr ""
 
+#: py/parse.c
+msgid "malformed f-string"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "map buffer too small"
 msgstr ""
@@ -2212,6 +2455,14 @@ msgstr ""
 msgid "math domain error"
 msgstr ""
 
+#: extmod/ulab/code/linalg.c
+msgid "matrix dimensions do not match"
+msgstr ""
+
+#: extmod/ulab/code/linalg.c
+msgid "matrix is not positive definite"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 #, c-format
@@ -2235,6 +2486,10 @@ msgstr ""
 msgid "module not found"
 msgstr ""
 
+#: extmod/ulab/code/poly.c
+msgid "more degrees of freedom than data points"
+msgstr ""
+
 #: py/compile.c
 msgid "multiple *x in assignment"
 msgstr ""
@@ -2259,6 +2514,10 @@ msgstr ""
 msgid "must use keyword argument for key function"
 msgstr ""
 
+#: extmod/ulab/code/numerical.c
+msgid "n must be between 0, and 9"
+msgstr ""
+
 #: py/runtime.c
 msgid "name '%q' is not defined"
 msgstr ""
@@ -2345,6 +2604,14 @@ msgstr ""
 msgid "not enough arguments for format string"
 msgstr ""
 
+#: extmod/ulab/code/poly.c
+msgid "number of arguments must be 2, or 3"
+msgstr ""
+
+#: extmod/ulab/code/create.c
+msgid "number of points must be at least 2"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "object '%s' is not a tuple or list"
@@ -2412,6 +2679,18 @@ msgstr ""
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c extmod/ulab/code/vectorise.c
+msgid "operands could not be broadcast together"
+msgstr ""
+
+#: extmod/ulab/code/numerical.c
+msgid "operation is not implemented on ndarrays"
+msgstr ""
+
+#: extmod/ulab/code/ndarray.c
+msgid "operation is not supported for given type"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "ord expects a character"
 msgstr ""
@@ -2460,6 +2739,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
+#: ports/stm/common-hal/pulseio/PulseIn.c
 msgid "pop from an empty PulseIn"
 msgstr ""
 
@@ -2487,6 +2767,14 @@ msgstr ""
 msgid "queue overflow"
 msgstr ""
 
+#: py/parse.c
+msgid "raw f-strings are not implemented"
+msgstr ""
+
+#: extmod/ulab/code/fft.c
+msgid "real and imaginary parts must be of equal length"
+msgstr ""
+
 #: py/builtinimport.c
 msgid "relative import"
 msgstr ""
@@ -2504,6 +2792,20 @@ msgstr ""
 msgid "return expected '%q' but got '%q'"
 msgstr ""
 
+#: shared-bindings/_protomatter/Protomatter.c
+#, c-format
+msgid "rgb_pins[%d] duplicates another pin assignment"
+msgstr ""
+
+#: shared-bindings/_protomatter/Protomatter.c
+#, c-format
+msgid "rgb_pins[%d] is not on the same port as clock"
+msgstr ""
+
+#: extmod/ulab/code/ndarray.c
+msgid "right hand side must be an ndarray, or a scalar"
+msgstr ""
+
 #: py/objstr.c
 msgid "rsplit(None,n)"
 msgstr ""
@@ -2526,6 +2828,10 @@ msgstr ""
 msgid "script compilation not supported"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "shape must be a 2-tuple"
+msgstr ""
+
 #: py/objstr.c
 msgid "sign not allowed in string format specifier"
 msgstr ""
@@ -2538,6 +2844,10 @@ msgstr ""
 msgid "single '}' encountered in format string"
 msgstr ""
 
+#: extmod/ulab/code/linalg.c
+msgid "size is defined for ndarrays only"
+msgstr ""
+
 #: shared-bindings/time/__init__.c
 msgid "sleep length must be non-negative"
 msgstr ""
@@ -2554,6 +2864,10 @@ msgstr ""
 msgid "soft reboot\n"
 msgstr ""
 
+#: extmod/ulab/code/numerical.c
+msgid "sort argument must be an ndarray"
+msgstr ""
+
 #: py/objstr.c
 msgid "start/end indices"
 msgstr ""
@@ -2643,12 +2957,16 @@ msgstr ""
 msgid "too many arguments provided with the given format"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "too many indices"
+msgstr ""
+
 #: py/runtime.c
 #, c-format
 msgid "too many values to unpack (expected %d)"
 msgstr ""
 
-#: py/objstr.c
+#: extmod/ulab/code/linalg.c py/objstr.c
 msgid "tuple index out of range"
 msgstr ""
 
@@ -2662,6 +2980,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""
 
@@ -2779,6 +3098,14 @@ msgstr ""
 msgid "window must be <= interval"
 msgstr ""
 
+#: extmod/ulab/code/linalg.c
+msgid "wrong argument type"
+msgstr ""
+
+#: extmod/ulab/code/ndarray.c
+msgid "wrong index type"
+msgstr ""
+
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr ""
@@ -2787,6 +3114,10 @@ msgstr ""
 msgid "wrong number of values to unpack"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "wrong operand type"
+msgstr ""
+
 #: shared-module/displayio/Shape.c
 msgid "x value out of bounds"
 msgstr ""