Merge pull request #3486 from microDev1/fixTranslate

Update make translate script

1 files changed, 124 insertions, 15 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 2b395356c..b6de5667e 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -280,7 +280,7 @@ msgstr ""
 msgid "Address type out of range"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr ""
 
@@ -288,11 +288,11 @@ msgstr ""
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr ""
 
@@ -314,6 +314,9 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -333,6 +336,10 @@ msgstr ""
 msgid "Already running"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr ""
@@ -550,6 +557,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr ""
@@ -640,14 +648,15 @@ msgid "Could not initialize SDCard"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr ""
 
@@ -663,6 +672,10 @@ msgstr ""
 msgid "Could not restart PWM"
 msgstr ""
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr ""
@@ -753,6 +766,10 @@ msgstr ""
 msgid "ECB only operates on 16 bytes at a time"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -810,6 +827,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -826,12 +847,21 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -840,6 +870,10 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr ""
@@ -933,7 +967,7 @@ msgstr ""
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr ""
 
@@ -1026,6 +1060,10 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr ""
@@ -1063,6 +1101,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1194,21 +1234,25 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1251,6 +1295,14 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr ""
@@ -1314,6 +1366,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1331,6 +1391,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1345,6 +1409,7 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1390,6 +1455,12 @@ msgstr ""
 msgid "Polygon needs at least 3 points"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1419,12 +1490,13 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr ""
 
@@ -1478,7 +1550,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
@@ -1546,6 +1618,10 @@ msgstr ""
 msgid "Slices not supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr ""
@@ -1708,6 +1784,10 @@ msgstr ""
 msgid "Unable to allocate buffers for signed conversion"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1734,6 +1814,11 @@ msgstr ""
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1769,7 +1854,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -2009,6 +2094,7 @@ msgid "byteorder is not a string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr ""
 
@@ -2523,7 +2609,7 @@ msgstr ""
 msgid "index is out of bounds"
 msgstr ""
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr ""
 
@@ -3026,6 +3112,10 @@ msgstr ""
 msgid "polygon can only be registered in one parent"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3042,6 +3132,24 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr ""
@@ -3284,7 +3392,8 @@ msgstr ""
 msgid "tuple/list has wrong length"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr ""